mediapointer-dvb-s2/linux/drivers/media/dvb, branch master

stv090x: Add DiSEqC envelope mode

2009-12-12T13:09:32+00:00

Support DiSEqC envelope mode. Feature is enabled by setting
config->diseqc_envelope_mode = true (default: disabled).

Signed-off-by: Oliver Endriss

lnbp21: Implement 22 kHz tone control

2009-12-12T13:09:14+00:00

Support 22 kHz tone control for lnbp21 and lnbh24.
(Overrides the 'set_tone' hook of the frontend driver.)

Signed-off-by: Oliver Endriss

Manual merge with http://powarman.dyndns.org/hg/v4l-dvb

2009-12-08T20:34:58+00:00

From: Matthias Benesch 

Added bugfixes of modules stv090x and stv6110x from
http://powarman.dyndns.org/hgwebdir.cgi/v4l-dvb/.

Priority: normal

Changed stv0900_config within module ngene.

2009-12-08T20:32:47+00:00

From: Matthias Benesch 

Removed stv0900_regs and set stv0900_config.ts_config_regs=NULL.
Set path1_mode and path2_mode to STV0900_SRIAL_PUNCT_CLOCK.

Priority: normal

Changes within module ngene based on information from Media-Pointer.

2009-12-08T20:28:11+00:00

From: Matthias Benesch 

Added initialisation of register TSTTNR1=0x26 & TSTTNR3=0x26.
Used "#ifdef 0" instead of commenting unnecessary sourcecode.
Set repeter level from STV090x_RPTLEVEL_64 to STV090x_RPTLEVEL_16.

Priority: normal

dib0700: Be less verbose when an IR key is pressed

2009-09-26T16:45:03+00:00

From: Mauro Carvalho Chehab 

Priority: normal

Signed-off-by: Mauro Carvalho Chehab

Add support for Pixelview SBTVD IR

2009-09-26T16:31:31+00:00

From: Mauro Carvalho Chehab 

This IR uses NEC protocol. In order to use, dvb_usb_dib0700_ir_proto=0
should be used.

Priority: normal

CC: Patrick Boettcher 
Signed-off-by: Mauro Carvalho Chehab

Add NEC protocol to firmware v1.2 handler

2009-09-26T16:29:35+00:00

From: Mauro Carvalho Chehab 

Currently, dvb_usb_dib0700_ir_proto is supported only with firmwares
older than 1.2. Adds support for it also with the newer firmware.

This is needed in order to support PixelView SBTVD IR.

Priority: normal

CC: Patrick Boettcher 
Signed-off-by: Mauro Carvalho Chehab

dib0700: not building CONFIG_DVB_TUNER_DIB0070 breaks compilation

2009-09-22T22:07:06+00:00

From: Mauro Carvalho Chehab 

As reported by Ingo Molnar:
 Here's another new build breakage that triggers in -tip testing:

 drivers/built-in.o:(.data+0xb1f40): undefined reference to `dib0070_ctrl_agc_filter'
 drivers/built-in.o:(.data+0xb1f80): undefined reference to `dib0070_ctrl_agc_filter'

triggers due to:

CONFIG_DVB_USB_DIB0700=y
CONFIG_DVB_TUNER_DIB0070 is not set

While working on a better approach, for now, let's just select tuner
dib0070 anytime we compile dib0700.

CC: Patrick Boettcher 
Signed-off-by: Mauro Carvalho Chehab

dvbdev: Remove an anoying/uneeded warning

2009-09-19T12:45:22+00:00

From: Mauro Carvalho Chehab 

As pointed by Marcin Slusarz , the warns happens
because CONFIG_DVB_MAX_ADAPTERS depends on CONFIG_DVB_CORE, and there are
valid configs where DVB_CORE is not selected.

This causes such warnings, for every V4L and common drivers that may or
may not be compiled with DVB support:

drivers/media/dvb/dvb-core/dvbdev.h:36:2: warning: #warning invalid CONFIG_DVB_MAX_ADAPTERS value

We can safely remove the warning.

Priority: normal

Signed-off-by: Mauro Carvalho Chehab