mediapointer-dvb-s2/linux/drivers/media/video/bt8xx/Kconfig, branch master

bttv: move saa6588 config to the helper chip config

2009-03-29T09:17:31+00:00

From: Hans Verkuil 

saa6588 can also be used by other drivers than just bttv. Move it to a
new RDS decoders category and add it as helper chip to bttv.

Priority: normal

Signed-off-by: Hans Verkuil

bttv: tda9875 is no longer used by bttv, so remove from bt8xx/Kconfig.

2009-03-28T11:55:11+00:00

From: Hans Verkuil 

Since tda9875 support was merged into tvaudio the bttv driver no
longer needs tda9875 as helper driver.

Priority: normal

Signed-off-by: Hans Verkuil

remove select's of FW_LOADER

2008-07-27T13:04:55+00:00

From: Adrian Bunk 

After commit d9b19199e4894089456aaad295023263b5225c1a
(always enable FW_LOADER unless EMBEDDED=y) we can remove
the FW_LOADER select's and corresponding dependencies
on HOTPLUG.

Signed-off-by: Adrian Bunk 
Signed-off-by: Mauro Carvalho Chehab

Fix FW_LOADER depencency at v4l/dvb

2008-05-06T14:09:01+00:00

From: Mauro Carvalho Chehab 

Since:

1) FW_LOADER is defined as:

config FW_LOADER
        tristate "Userspace firmware loading support"
        depends on HOTPLUG

2) several V4L/DVB driver just selects it;

3) select is not smart enough to auto-select HOTPLUG, if select FW_LOADER.

So, All drivers that select FW_LOADER should also depend on HOTPLUG.

An easier solution (for the end-user perspective) would be to "select HOTPLUG".
However, live is not simple. This would cause recursive dependency issues like
this one:

drivers/usb/Kconfig:62:error: found recursive dependency: USB -> USB_OHCI_HCD
-> I2C -> MEDIA_TUNER -> MEDIA_TUNER_XC2028 -> HOTPLUG -> PCCARD -> PCMCIA ->
USB_ARCH_HAS_HCD -> MOUSE_APPLETOUCH -> USB

Signed-off-by: Mauro Carvalho Chehab

Re-creates VIDEO_TUNER

2008-05-06T12:35:58+00:00

From: Mauro Carvalho Chehab 

VIDEO_TUNER is responsible for compilation of tuners.ko module. This were the
previous behaviour before the creation of MEDIA_TUNER.

Before this patch, tuner.ko were created even for drivers that don't need a
tuner (like webcam drivers).

Signed-off-by: Mauro Carvalho Chehab

Use the same name convention for all tuners under common/tuners

2008-04-30T03:09:25+00:00

From: Mauro Carvalho Chehab 

kernel-sync:

Auto generated by this script:
for i in `find drivers/media/ -name Kconfig`; do
  cat $i                                        |\
  sed s,DVB_CORE_ATTACH,MEDIA_ATTACH,g          |\
  sed s,VIDEO_TUNER,MEDIA_TUNER,g               |\
  sed s,TUNER_SIMPLE,MEDIA_TUNER_SIMPLE,g       |\
  sed s,TUNER_TDA8290,MEDIA_TUNER_TDA8290,g     |\
  sed s,DVB_TDA827X,MEDIA_TUNER_TDA827X,g       |\
  sed s,DVB_TDA18271,MEDIA_TUNER_TDA18271,g     |\
  sed s,TUNER_TDA9887,MEDIA_TUNER_TDA9887,g     |\
  sed s,TUNER_TEA5761,MEDIA_TUNER_TEA5761,g     |\
  sed s,TUNER_TEA5767,MEDIA_TUNER_TEA5767,g     |\
  sed s,TUNER_MT20XX,MEDIA_TUNER_MT20XX,g       |\
  sed s,DVB_TUNER_MT2060,MEDIA_TUNER_MT2060,g   |\
  sed s,DVB_TUNER_MT2266,MEDIA_TUNER_MT2266,g   |\
  sed s,DVB_TUNER_MT2131,MEDIA_TUNER_MT2131,g   |\
  sed s,DVB_TUNER_QT1010,MEDIA_TUNER_QT1010,g   |\
  sed s,TUNER_XC2028,MEDIA_TUNER_XC2028,g       |\
  sed s,DVB_TUNER_XC5000,MEDIA_TUNER_XC5000,g   >/tmp/temp_mv$$
  mv /tmp/temp_mv$$ $i
done

for i in `find drivers/media/ -type f`; do
  cat $i                                                        |\
  sed s,CONFIG_DVB_CORE_ATTACH,CONFIG_MEDIA_ATTACH,g            |\
  sed s,CONFIG_VIDEO_TUNER,CONFIG_MEDIA_TUNER,g                 |\
  sed s,CONFIG_TUNER_SIMPLE,CONFIG_MEDIA_TUNER_SIMPLE,g         |\
  sed s,CONFIG_TUNER_TDA8290,CONFIG_MEDIA_TUNER_TDA8290,g       |\
  sed s,CONFIG_DVB_TDA827X,CONFIG_MEDIA_TUNER_TDA827X,g         |\
  sed s,CONFIG_DVB_TDA18271,CONFIG_MEDIA_TUNER_TDA18271,g       |\
  sed s,CONFIG_TUNER_TDA9887,CONFIG_MEDIA_TUNER_TDA9887,g       |\
  sed s,CONFIG_TUNER_TEA5761,CONFIG_MEDIA_TUNER_TEA5761,g       |\
  sed s,CONFIG_TUNER_TEA5767,CONFIG_MEDIA_TUNER_TEA5767,g       |\
  sed s,CONFIG_TUNER_MT20XX,CONFIG_MEDIA_TUNER_MT20XX,g         |\
  sed s,CONFIG_DVB_TUNER_MT2060,CONFIG_MEDIA_TUNER_MT2060,g     |\
  sed s,CONFIG_DVB_TUNER_MT2266,CONFIG_MEDIA_TUNER_MT2266,g     |\
  sed s,CONFIG_DVB_TUNER_MT2131,CONFIG_MEDIA_TUNER_MT2131,g     |\
  sed s,CONFIG_DVB_TUNER_QT1010,CONFIG_MEDIA_TUNER_QT1010,g     |\
  sed s,CONFIG_TUNER_XC2028,CONFIG_MEDIA_TUNER_XC2028,g         |\
  sed s,CONFIG_DVB_TUNER_XC5000,CONFIG_MEDIA_TUNER_XC5000,g     >/tmp/temp_mv$$
  mv /tmp/temp_mv$$ $i
done

Signed-off-by: Mauro Carvalho Chehab

bttv: uses input functions, should depend on INPUT

2007-10-29T18:19:45+00:00

From: Randy Dunlap 

Several media drivers use input_(*) functions so they need to depend on
the INPUT config symbol.

drivers/built-in.o: In function `bttv_input_fini':
linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:346: undefined reference to `input_unregister_device'
drivers/built-in.o: In function `bttv_input_init':
linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:204: undefined reference to `input_allocate_device'
linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:335: undefined reference to `input_free_device'
linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:321: undefined reference to `input_register_device'
linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:335: undefined reference to `input_free_device'

Signed-off-by: Randy Dunlap 
Signed-off-by: Mauro Carvalho Chehab

Partial conversion from V4L1 to V4L2

2007-10-26T14:01:08+00:00

From: Nickolay V. Shmyrev 

This is part of the old V4L1->V4L2 bttv patch, ported to current tree
by Mauro Carvalho Chehab 

Signed-off-by: Nickolay V. Shmyrev 
Signed-off-by: Mauro Carvalho Chehab 

---
 linux/drivers/media/video/bt8xx/Kconfig       |    2
 linux/drivers/media/video/bt8xx/bttv-driver.c |  663 +++++---------------------
 linux/drivers/media/video/bt8xx/bttvp.h       |    4
 3 files changed, 131 insertions(+), 538 deletions(-)

Adapt drivers to use the newer videobuf modules

2007-08-23T19:37:49+00:00

PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo.

Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct.
So, to access it, a subroutine call is needed.

This patch renames all occurences of those function calls to be
consistent with the video-buf split.

Signed-off-by: Mauro Carvalho Chehab 
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981
Reviewed-by: Ricardo Cerqueira

Allow manually selecting the proper helper drivers

2006-08-22T21:49:17+00:00

From: Mauro Carvalho Chehab 

There are several boards on V4L that can work with several different
helper modules for audio/video encoding/decoding and similar stuff.

This patch adds the capability of choicing between autoselecting the
pertinent helper modules for each driver, or to manually selecting
them.

Acked-by: Michael Krufky 
Acked-by: Mike Isely 
Signed-off-by: Mauro Carvalho Chehab