diff options
46 files changed, 1374 insertions, 306 deletions
diff --git a/linux/Documentation/video4linux/cx18.txt b/linux/Documentation/video4linux/cx18.txt index 077d56ec3..6842c2628 100644 --- a/linux/Documentation/video4linux/cx18.txt +++ b/linux/Documentation/video4linux/cx18.txt @@ -1,7 +1,9 @@ Some notes regarding the cx18 driver for the Conexant CX23418 MPEG encoder chip: -1) The only hardware currently supported is the Hauppauge HVR-1600. +1) The only hardware currently supported is the Hauppauge HVR-1600 + card and the Compro VideoMate H900 (note that this card only + supports analog input, it has no digital tuner!). 2) Some people have problems getting the i2c bus to work. Cause unknown. The symptom is that the eeprom cannot be read and the card is diff --git a/linux/drivers/media/Makefile b/linux/drivers/media/Makefile index 73f742c7e..09a829d8a 100644 --- a/linux/drivers/media/Makefile +++ b/linux/drivers/media/Makefile @@ -2,10 +2,7 @@ # Makefile for the kernel multimedia device drivers. # -obj-$(CONFIG_VIDEO_MEDIA) += common/ - -# Since hybrid devices are here, should be compiled if DVB and/or V4L -obj-$(CONFIG_VIDEO_MEDIA) += video/ +obj-y += common/ video/ obj-$(CONFIG_VIDEO_DEV) += radio/ obj-$(CONFIG_DVB_CORE) += dvb/ diff --git a/linux/drivers/media/common/tuners/mxl5005s.c b/linux/drivers/media/common/tuners/mxl5005s.c index 961a8af08..e356db855 100644 --- a/linux/drivers/media/common/tuners/mxl5005s.c +++ b/linux/drivers/media/common/tuners/mxl5005s.c @@ -101,7 +101,7 @@ enum { MXL_QAM, MXL_ANALOG_CABLE, MXL_ANALOG_OTA -} tuner_modu_type; +}; /* MXL5005 Tuner Register Struct */ struct TunerReg { @@ -194,7 +194,7 @@ enum { RFSYN_DIVM, /* 88 */ DN_BYPASS_AGC_I2C /* 89 */ #endif -} MXL5005_ControlName; +}; /* * The following context is source code provided by MaxLinear. @@ -4110,4 +4110,3 @@ EXPORT_SYMBOL(mxl5005s_attach); MODULE_DESCRIPTION("MaxLinear MXL5005S silicon tuner driver"); MODULE_AUTHOR("Steven Toth"); MODULE_LICENSE("GPL"); - diff --git a/linux/drivers/media/common/tuners/tea5761.c b/linux/drivers/media/common/tuners/tea5761.c index 11e2991ef..f5fadcd4b 100644 --- a/linux/drivers/media/common/tuners/tea5761.c +++ b/linux/drivers/media/common/tuners/tea5761.c @@ -301,7 +301,7 @@ struct dvb_frontend *tea5761_attach(struct dvb_frontend *fe, { struct tea5761_priv *priv = NULL; - if (tea5761_autodetection(i2c_adap, i2c_addr) == EINVAL) + if (tea5761_autodetection(i2c_adap, i2c_addr) != 0) return NULL; priv = kzalloc(sizeof(struct tea5761_priv), GFP_KERNEL); diff --git a/linux/drivers/media/common/tuners/tuner-simple.c b/linux/drivers/media/common/tuners/tuner-simple.c index 29c14a4c6..c9d70e4b2 100644 --- a/linux/drivers/media/common/tuners/tuner-simple.c +++ b/linux/drivers/media/common/tuners/tuner-simple.c @@ -1053,8 +1053,10 @@ struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe, fe->ops.i2c_gate_ctrl(fe, 1); if (1 != i2c_transfer(i2c_adap, &msg, 1)) - tuner_warn("unable to probe %s, proceeding anyway.", - tuners[type].name); + printk(KERN_WARNING "tuner-simple %d-%04x: " + "unable to probe %s, proceeding anyway.", + i2c_adapter_id(i2c_adap), i2c_addr, + tuners[type].name); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig index cf4584e48..615e5bbec 100644 --- a/linux/drivers/media/dvb/dvb-usb/Kconfig +++ b/linux/drivers/media/dvb/dvb-usb/Kconfig @@ -1,6 +1,6 @@ config DVB_USB tristate "Support for various USB DVB devices" - depends on DVB_CORE && USB && I2C + depends on DVB_CORE && USB && I2C && INPUT depends on HOTPLUG # due to FW_LOADER select FW_LOADER help @@ -241,3 +241,13 @@ config DVB_USB_AF9005_REMOTE Say Y here to support the default remote control decoding for the Afatech AF9005 based receiver. +config DVB_USB_ANYSEE + tristate "Anysee DVB-T/C USB2.0 support" + depends on DVB_USB + select DVB_MT352 if !DVB_FE_CUSTOMISE + select DVB_ZL10353 if !DVB_FE_CUSTOMISE + select DVB_TDA10023 if !DVB_FE_CUSTOMISE + help + Say Y here to support the Anysee E30, Anysee E30 Plus or + Anysee E30 C Plus DVB USB2.0 receiver. + diff --git a/linux/drivers/media/dvb/dvb-usb/Makefile b/linux/drivers/media/dvb/dvb-usb/Makefile index c6511a6c0..44c11e45e 100644 --- a/linux/drivers/media/dvb/dvb-usb/Makefile +++ b/linux/drivers/media/dvb/dvb-usb/Makefile @@ -61,6 +61,9 @@ obj-$(CONFIG_DVB_USB_AF9005) += dvb-usb-af9005.o dvb-usb-af9005-remote-objs = af9005-remote.o obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o +dvb-usb-anysee-objs = anysee.o +obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/linux/drivers/media/dvb/dvb-usb/anysee.c b/linux/drivers/media/dvb/dvb-usb/anysee.c new file mode 100644 index 000000000..89675dbf7 --- /dev/null +++ b/linux/drivers/media/dvb/dvb-usb/anysee.c @@ -0,0 +1,558 @@ +/* + * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO: + * - add smart card reader support for Conditional Access (CA) + * + * Card reader in Anysee is nothing more than ISO 7816 card reader. + * There is no hardware CAM in any Anysee device sold. + * In my understanding it should be implemented by making own module + * for ISO 7816 card reader, like dvb_ca_en50221 is implented. This + * module registers serial interface that can be used to comminicate + * with any ISO 7816 smart card. + * + * Any help according to implement serial smart card reader support + * is highly welcome! + */ + +#include "anysee.h" +#include "tda1002x.h" +#include "mt352.h" +#include "mt352_priv.h" +#include "zl10353.h" + +/* debug */ +static int dvb_usb_anysee_debug; +module_param_named(debug, dvb_usb_anysee_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct mutex anysee_usb_mutex; + +static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, + u8 *rbuf, u8 rlen) +{ + struct anysee_state *state = d->priv; + int act_len, ret; + u8 buf[64]; + + if (slen > sizeof(buf)) + slen = sizeof(buf); + memcpy(&buf[0], sbuf, slen); + buf[60] = state->seq++; + + if (mutex_lock_interruptible(&anysee_usb_mutex) < 0) + return -EAGAIN; + + /* We need receive one message more after dvb_usb_generic_rw due + to weird transaction flow, which is 1 x send + 2 x receive. */ + ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0); + + if (!ret) { + /* receive 2nd answer */ + ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, + d->props.generic_bulk_ctrl_endpoint), buf, sizeof(buf), + &act_len, 2000); + if (ret) + err("%s: recv bulk message failed: %d", __func__, ret); + else { + deb_xfer("<<< "); + debug_dump(buf, act_len, deb_xfer); + } + } + + /* read request, copy returned data to return buf */ + if (!ret && rbuf && rlen) + memcpy(rbuf, buf, rlen); + + mutex_unlock(&anysee_usb_mutex); + + return ret; +} + +static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val) +{ + u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01}; + int ret; + ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1); + deb_info("%s: reg:%04x val:%02x\n", __func__, reg, *val); + return ret; +} + +static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val) +{ + u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val}; + deb_info("%s: reg:%04x val:%02x\n", __func__, reg, val); + return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); +} + +static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id) +{ + u8 buf[] = {CMD_GET_HW_INFO}; + return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3); +} + +static int anysee_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00}; + deb_info("%s: onoff:%02x\n", __func__, onoff); + return anysee_ctrl_msg(adap->dev, buf, sizeof(buf), NULL, 0); +} + +static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval) +{ + u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval}; + deb_info("%s: state:%02x interval:%02x\n", __func__, mode, interval); + return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); +} + +static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff) +{ + u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff}; + deb_info("%s: onoff:%02x\n", __func__, onoff); + return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); +} + +static int anysee_init(struct dvb_usb_device *d) +{ + int ret; + /* LED light */ + ret = anysee_led_ctrl(d, 0x01, 0x03); + if (ret) + return ret; + + /* enable IR */ + ret = anysee_ir_ctrl(d, 1); + if (ret) + return ret; + + return 0; +} + +/* I2C */ +static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int ret, inc, i = 0; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + while (i < num) { + if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { + u8 buf[6]; + buf[0] = CMD_I2C_READ; + buf[1] = msg[i].addr + 1; + buf[2] = msg[i].buf[0]; + buf[3] = 0x00; + buf[4] = 0x00; + buf[5] = 0x01; + ret = anysee_ctrl_msg(d, buf, sizeof(buf), msg[i+1].buf, + msg[i+1].len); + inc = 2; + } else { + u8 buf[4+msg[i].len]; + buf[0] = CMD_I2C_WRITE; + buf[1] = msg[i].addr; + buf[2] = msg[i].len; + buf[3] = 0x01; + memcpy(&buf[4], msg[i].buf, msg[i].len); + ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); + inc = 1; + } + if (ret) + return ret; + + i += inc; + } + + mutex_unlock(&d->i2c_mutex); + + return i; +} + +static u32 anysee_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm anysee_i2c_algo = { + .master_xfer = anysee_master_xfer, + .functionality = anysee_i2c_func, +}; + +static int anysee_mt352_demod_init(struct dvb_frontend *fe) +{ + static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 }; + static u8 reset [] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 }; + static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; + static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + + return 0; +} + +/* Callbacks for DVB USB */ +static struct tda10023_config anysee_tda10023_config = { + .demod_address = 0x1a, + .invert = 0, + .xtal = 16000000, + .pll_m = 11, + .pll_p = 3, + .pll_n = 1, + .deltaf = 0xfed6, +}; + +static struct mt352_config anysee_mt352_config = { + .demod_address = 0x1e, + .demod_init = anysee_mt352_demod_init, +}; + +static struct zl10353_config anysee_zl10353_config = { + .demod_address = 0x1e, + .parallel_ts = 1, +}; + +static int anysee_frontend_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct anysee_state *state = adap->dev->priv; + u8 hw_info[3]; + u8 io_d; /* IO port D */ + + /* check which hardware we have + We must do this call two times to get reliable values (hw bug). */ + ret = anysee_get_hw_info(adap->dev, hw_info); + if (ret) + return ret; + ret = anysee_get_hw_info(adap->dev, hw_info); + if (ret) + return ret; + + /* Meaning of these info bytes are guessed. */ + info("firmware version:%d.%d.%d hardware id:%d", + 0, hw_info[1], hw_info[2], hw_info[0]); + + ret = anysee_read_reg(adap->dev, 0xb0, &io_d); /* IO port D */ + if (ret) + return ret; + deb_info("%s: IO port D:%02x\n", __func__, io_d); + + /* Select demod using trial and error method. */ + + /* Try to attach demodulator in following order: + model demod hw firmware + 1. E30 MT352 02 0.2.1 + 2. E30 ZL10353 02 0.2.1 + 3. E30 Plus ZL10353 06 0.1.0 + 4. E30C Plus TDA10023 0a 0.1.0 + E30C Plus TDA10023 0f 0.1.2 (not working) + */ + + /* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */ + adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_THOMSON_DTT7579; + return 0; + } + + /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */ + adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_THOMSON_DTT7579; + return 0; + } + + /* connect demod on IO port D for TDA10023 & ZL10353 */ + ret = anysee_write_reg(adap->dev, 0xb0, 0x25); + if (ret) + return ret; + + /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */ + adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_THOMSON_DTT7579; + return 0; + } + + /* known not working (E30C Plus v0.1.2) */ + if (hw_info[0] == 0x0f) { + info("this version of Anysee is not supported yet"); + /* return IO port D to init value for safe */ + ret = anysee_write_reg(adap->dev, 0xb0, io_d); + return -ENODEV; + } + + /* Philips TDA10023 DVB-C demod */ + adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config, + &adap->dev->i2c_adap, 0x48); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A; + return 0; + } + + /* return IO port D to init value for safe */ + ret = anysee_write_reg(adap->dev, 0xb0, io_d); + if (ret) + return ret; + + err("Unkown Anysee version: %02x %02x %02x. "\ + "Please report the <linux-dvb@linuxtv.org>.", + hw_info[0], hw_info[1], hw_info[2]); + + return -ENODEV; +} + +static int anysee_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct anysee_state *state = adap->dev->priv; + deb_info("%s: \n", __func__); + + switch (state->tuner) { + case DVB_PLL_THOMSON_DTT7579: + /* Thomson dtt7579 (not sure) PLL inside of: + Samsung DNOS404ZH102A NIM + Samsung DNOS404ZH103A NIM */ + dvb_attach(dvb_pll_attach, adap->fe, 0x61, + NULL, DVB_PLL_THOMSON_DTT7579); + break; + case DVB_PLL_SAMSUNG_DTOS403IH102A: + /* Unknown PLL inside of Samsung DTOS403IH102A tuner module */ + dvb_attach(dvb_pll_attach, adap->fe, 0xc0, + &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A); + break; + } + + return 0; +} + +static int anysee_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 buf[] = {CMD_GET_IR_CODE}; + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + u8 ircode[2]; + int i, ret; + + ret = anysee_ctrl_msg(d, buf, sizeof(buf), &ircode[0], 2); + if (ret) + return ret; + + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + for (i = 0; i < d->props.rc_key_map_size; i++) { + if (keymap[i].custom == ircode[0] && + keymap[i].data == ircode[1]) { + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + return 0; + } + } + return 0; +} + +static struct dvb_usb_rc_key anysee_rc_keys[] = { + { 0x01, 0x00, KEY_0 }, + { 0x01, 0x01, KEY_1 }, + { 0x01, 0x02, KEY_2 }, + { 0x01, 0x03, KEY_3 }, + { 0x01, 0x04, KEY_4 }, + { 0x01, 0x05, KEY_5 }, + { 0x01, 0x06, KEY_6 }, + { 0x01, 0x07, KEY_7 }, + { 0x01, 0x08, KEY_8 }, + { 0x01, 0x09, KEY_9 }, + { 0x01, 0x0a, KEY_POWER }, + { 0x01, 0x0b, KEY_DOCUMENTS }, /* * */ + { 0x01, 0x19, KEY_FAVORITES }, + { 0x01, 0x20, KEY_SLEEP }, + { 0x01, 0x21, KEY_MODE }, /* 4:3 / 16:9 select */ + { 0x01, 0x22, KEY_ZOOM }, + { 0x01, 0x47, KEY_TEXT }, + { 0x01, 0x16, KEY_TV }, /* TV / radio select */ + { 0x01, 0x1e, KEY_LANGUAGE }, /* Second Audio Program */ + { 0x01, 0x1a, KEY_SUBTITLE }, + { 0x01, 0x1b, KEY_CAMERA }, /* screenshot */ + { 0x01, 0x42, KEY_MUTE }, + { 0x01, 0x0e, KEY_MENU }, + { 0x01, 0x0f, KEY_EPG }, + { 0x01, 0x17, KEY_INFO }, + { 0x01, 0x10, KEY_EXIT }, + { 0x01, 0x13, KEY_VOLUMEUP }, + { 0x01, 0x12, KEY_VOLUMEDOWN }, + { 0x01, 0x11, KEY_CHANNELUP }, + { 0x01, 0x14, KEY_CHANNELDOWN }, + { 0x01, 0x15, KEY_OK }, + { 0x01, 0x1d, KEY_RED }, + { 0x01, 0x1f, KEY_GREEN }, + { 0x01, 0x1c, KEY_YELLOW }, + { 0x01, 0x44, KEY_BLUE }, + { 0x01, 0x0c, KEY_SHUFFLE }, /* snapshot */ + { 0x01, 0x48, KEY_STOP }, + { 0x01, 0x50, KEY_PLAY }, + { 0x01, 0x51, KEY_PAUSE }, + { 0x01, 0x49, KEY_RECORD }, + { 0x01, 0x18, KEY_PREVIOUS }, /* |<< */ + { 0x01, 0x0d, KEY_NEXT }, /* >>| */ + { 0x01, 0x24, KEY_PROG1 }, /* F1 */ + { 0x01, 0x25, KEY_PROG2 }, /* F2 */ +}; + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties anysee_properties; + +static int anysee_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct dvb_usb_device *d; + struct usb_host_interface *alt; + int ret; + + mutex_init(&anysee_usb_mutex); + + /* There is one interface with two alternate settings. + Alternate setting 0 is for bulk transfer. + Alternate setting 1 is for isochronous transfer. + We use bulk transfer (alternate setting 0). */ + if (intf->num_altsetting < 1) + return -ENODEV; + + ret = dvb_usb_device_init(intf, &anysee_properties, THIS_MODULE, &d, + adapter_nr); + if (ret) + return ret; + + alt = usb_altnum_to_altsetting(intf, 0); + if (alt == NULL) { + deb_info("%s: no alt found!\n", __func__); + return -ENODEV; + } + + ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber, + alt->desc.bAlternateSetting); + if (ret) + return ret; + + if (d) + ret = anysee_init(d); + + return ret; +} + +static struct usb_device_id anysee_table [] = { + { USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) }, + { USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, anysee_table); + +static struct dvb_usb_device_properties anysee_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + + .size_of_priv = sizeof(struct anysee_state), + + .num_adapters = 1, + .adapter = { + { + .streaming_ctrl = anysee_streaming_ctrl, + .frontend_attach = anysee_frontend_attach, + .tuner_attach = anysee_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 512, + } + } + }, + } + }, + + .rc_key_map = anysee_rc_keys, + .rc_key_map_size = ARRAY_SIZE(anysee_rc_keys), + .rc_query = anysee_rc_query, + .rc_interval = 200, /* windows driver uses 500ms */ + + .i2c_algo = &anysee_i2c_algo, + + .generic_bulk_ctrl_endpoint = 1, + + .num_device_descs = 1, + .devices = { + { + .name = "Anysee DVB USB2.0", + .cold_ids = {NULL}, + .warm_ids = {&anysee_table[0], + &anysee_table[1], NULL}, + }, + } +}; + +static struct usb_driver anysee_driver = { +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 15) + .owner = THIS_MODULE, +#endif + .name = "dvb_usb_anysee", + .probe = anysee_probe, + .disconnect = dvb_usb_device_exit, + .id_table = anysee_table, +}; + +/* module stuff */ +static int __init anysee_module_init(void) +{ + int ret; + + ret = usb_register(&anysee_driver); + if (ret) + err("%s: usb_register failed. Error number %d", __func__, ret); + + return ret; +} + +static void __exit anysee_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&anysee_driver); +} + +module_init(anysee_module_init); +module_exit(anysee_module_exit); + +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); +MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0"); +MODULE_LICENSE("GPL"); diff --git a/linux/drivers/media/dvb/dvb-usb/anysee.h b/linux/drivers/media/dvb/dvb-usb/anysee.h new file mode 100644 index 000000000..48da3949e --- /dev/null +++ b/linux/drivers/media/dvb/dvb-usb/anysee.h @@ -0,0 +1,304 @@ +/* + * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO: + * - add smart card reader support for Conditional Access (CA) + * + * Card reader in Anysee is nothing more than ISO 7816 card reader. + * There is no hardware CAM in any Anysee device sold. + * In my understanding it should be implemented by making own module + * for ISO 7816 card reader, like dvb_ca_en50221 is implented. This + * module registers serial interface that can be used to comminicate + * with any ISO 7816 smart card. + * + * Any help according to implement serial smart card reader support + * is highly welcome! + */ + +#ifndef _DVB_USB_ANYSEE_H_ +#define _DVB_USB_ANYSEE_H_ + +#define DVB_USB_LOG_PREFIX "anysee" +#include "dvb-usb.h" + +#define deb_info(args...) dprintk(dvb_usb_anysee_debug, 0x01, args) +#define deb_xfer(args...) dprintk(dvb_usb_anysee_debug, 0x02, args) +#define deb_rc(args...) dprintk(dvb_usb_anysee_debug, 0x04, args) +#define deb_reg(args...) dprintk(dvb_usb_anysee_debug, 0x08, args) +#define deb_i2c(args...) dprintk(dvb_usb_anysee_debug, 0x10, args) +#define deb_fw(args...) dprintk(dvb_usb_anysee_debug, 0x20, args) + +enum cmd { + CMD_I2C_READ = 0x33, + CMD_I2C_WRITE = 0x31, + CMD_REG_READ = 0xb0, + CMD_REG_WRITE = 0xb1, + CMD_STREAMING_CTRL = 0x12, + CMD_LED_AND_IR_CTRL = 0x16, + CMD_GET_IR_CODE = 0x41, + CMD_GET_HW_INFO = 0x19, + CMD_SMARTCARD = 0x34, +}; + +struct anysee_state { + u8 tuner; + u8 seq; +}; + +#endif + +/*************************************************************************** + * USB API description (reverse engineered) + *************************************************************************** + +Transaction flow: +================= +BULK[00001] >>> REQUEST PACKET 64 bytes +BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY) +BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY) + +General reply packet(s) are always used if not own reply defined. + +============================================================================ +| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY) +============================================================================ +| 00 | reply data (if any) from previous transaction +| | Just same reply packet as returned during previous transaction. +| | Needed only if reply is missed in previous transaction. +| | Just skip normally. +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY) +============================================================================ +| 00 | reply data (if any) +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | I2C WRITE REQUEST PACKET +============================================================================ +| 00 | 0x31 I2C write command +---------------------------------------------------------------------------- +| 01 | i2c address +---------------------------------------------------------------------------- +| 02 | data length +| | 0x02 (for typical I2C reg / val pair) +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04- | data +---------------------------------------------------------------------------- +| -59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | I2C READ REQUEST PACKET +============================================================================ +| 00 | 0x33 I2C read command +---------------------------------------------------------------------------- +| 01 | i2c address + 1 +---------------------------------------------------------------------------- +| 02 | register +---------------------------------------------------------------------------- +| 03 | 0x00 +---------------------------------------------------------------------------- +| 04 | 0x00 +---------------------------------------------------------------------------- +| 05 | 0x01 +---------------------------------------------------------------------------- +| 06-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET +============================================================================ +| 00 | 0xb1 register write command +---------------------------------------------------------------------------- +| 01-02 | register +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04 | value +---------------------------------------------------------------------------- +| 05-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET +============================================================================ +| 00 | 0xb0 register read command +---------------------------------------------------------------------------- +| 01-02 | register +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | LED CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x16 LED and IR control command +---------------------------------------------------------------------------- +| 01 | 0x01 (LED) +---------------------------------------------------------------------------- +| 03 | 0x00 blink +| | 0x01 lights continuously +---------------------------------------------------------------------------- +| 04 | blink interval +| | 0x00 fastest (looks like LED lights continuously) +| | 0xff slowest +---------------------------------------------------------------------------- +| 05-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | IR CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x16 LED and IR control command +---------------------------------------------------------------------------- +| 01 | 0x02 (IR) +---------------------------------------------------------------------------- +| 03 | 0x00 IR disabled +| | 0x01 IR enabled +---------------------------------------------------------------------------- +| 04-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | STREAMING CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x12 streaming control command +---------------------------------------------------------------------------- +| 01 | 0x00 streaming disabled +| | 0x01 streaming enabled +---------------------------------------------------------------------------- +| 02 | 0x00 +---------------------------------------------------------------------------- +| 03-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | REMOTE CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x41 remote control command +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | REMOTE CONTROL REPLY PACKET +============================================================================ +| 00 | 0x00 code not received +| | 0x01 code received +---------------------------------------------------------------------------- +| 01 | remote control code +---------------------------------------------------------------------------- +| 02-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GET HARDWARE INFO REQUEST PACKET +============================================================================ +| 00 | 0x19 get hardware info command +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GET HARDWARE INFO REPLY PACKET +============================================================================ +| 00 | hardware id +---------------------------------------------------------------------------- +| 01-02 | firmware version +---------------------------------------------------------------------------- +| 03-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | SMART CARD READER PACKET +============================================================================ +| 00 | 0x34 smart card reader command +---------------------------------------------------------------------------- +| xx | +---------------------------------------------------------------------------- +| xx-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +*/ diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 34245d1b7..e6b43fb3a 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -14,6 +14,7 @@ #define USB_VID_AFATECH 0x15a4 #define USB_VID_ALCOR_MICRO 0x058f #define USB_VID_ALINK 0x05e3 +#define USB_VID_AMT 0x1c73 #define USB_VID_ANCHOR 0x0547 #define USB_VID_ANSONIC 0x10b9 #define USB_VID_ANUBIS_ELECTRONIC 0x10fd @@ -57,6 +58,7 @@ #define USB_PID_AFATECH_AF9005 0x9020 #define USB_VID_ALINK_DTU 0xf170 #define USB_PID_ANSONIC_DVBT_USB 0x6000 +#define USB_PID_ANYSEE 0x861f #define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 #define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 #define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 diff --git a/linux/drivers/media/dvb/dvb-usb/gp8psk.c b/linux/drivers/media/dvb/dvb-usb/gp8psk.c index cc99e1cab..0a152fcb5 100644 --- a/linux/drivers/media/dvb/dvb-usb/gp8psk.c +++ b/linux/drivers/media/dvb/dvb-usb/gp8psk.c @@ -146,24 +146,24 @@ static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff) if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */ if(gp8psk_load_bcm4500fw(d)) - return EINVAL; + return -EINVAL; if (! (status & bmIntersilOn)) /* LNB Power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0, &buf, 1)) - return EINVAL; + return -EINVAL; /* Set DVB mode to 1 */ if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0)) - return EINVAL; + return -EINVAL; /* Abort possible TS (if previous tune crashed) */ if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0)) - return EINVAL; + return -EINVAL; } else { /* Turn off LNB power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1)) - return EINVAL; + return -EINVAL; /* Turn off 8psk power */ if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) return -EINVAL; diff --git a/linux/drivers/media/dvb/frontends/au8522.c b/linux/drivers/media/dvb/frontends/au8522.c index d536454b6..3e1b0d96f 100644 --- a/linux/drivers/media/dvb/frontends/au8522.c +++ b/linux/drivers/media/dvb/frontends/au8522.c @@ -26,7 +26,6 @@ #include <linux/slab.h> #include <linux/delay.h> #include "dvb_frontend.h" -#include "dvb-pll.h" #include "au8522.h" struct au8522_state { diff --git a/linux/drivers/media/dvb/frontends/dib7000p.h b/linux/drivers/media/dvb/frontends/dib7000p.h index 081bd81f3..07c4d12ed 100644 --- a/linux/drivers/media/dvb/frontends/dib7000p.h +++ b/linux/drivers/media/dvb/frontends/dib7000p.h @@ -37,7 +37,20 @@ struct dib7000p_config { #define DEFAULT_DIB7000P_I2C_ADDRESS 18 -extern struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg); +#if defined(CONFIG_DVB_DIB7000P) || (defined(CONFIG_DVB_DIB7000P_MODULE) && defined(MODULE)) +extern struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, + u8 i2c_addr, + struct dib7000p_config *cfg); +#else +static inline struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, + u8 i2c_addr, + struct dib7000p_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]); extern struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int); diff --git a/linux/drivers/media/dvb/frontends/dvb-pll.c b/linux/drivers/media/dvb/frontends/dvb-pll.c index 93785eef2..bb3e35373 100644 --- a/linux/drivers/media/dvb/frontends/dvb-pll.c +++ b/linux/drivers/media/dvb/frontends/dvb-pll.c @@ -344,6 +344,52 @@ static struct dvb_pll_desc dvb_pll_opera1 = { } }; +static void samsung_dtos403ih102a_set(struct dvb_frontend *fe, u8 *buf, + const struct dvb_frontend_parameters *params) +{ + struct dvb_pll_priv *priv = fe->tuner_priv; + struct i2c_msg msg = { + .addr = priv->pll_i2c_address, + .flags = 0, + .buf = buf, + .len = 4 + }; + int result; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + result = i2c_transfer(priv->i2c, &msg, 1); + if (result != 1) + printk(KERN_ERR "%s: i2c_transfer failed:%d", + __func__, result); + + buf[2] = 0x9e; + buf[3] = 0x90; + + return; +} + +/* unknown pll used in Samsung DTOS403IH102A DVB-C tuner */ +static struct dvb_pll_desc dvb_pll_samsung_dtos403ih102a = { + .name = "Samsung DTOS403IH102A", + .min = 44250000, + .max = 858000000, + .iffreq = 36125000, + .count = 8, + .set = samsung_dtos403ih102a_set, + .entries = { + { 135000000, 62500, 0xbe, 0x01 }, + { 177000000, 62500, 0xf6, 0x01 }, + { 370000000, 62500, 0xbe, 0x02 }, + { 450000000, 62500, 0xf6, 0x02 }, + { 466000000, 62500, 0xfe, 0x02 }, + { 538000000, 62500, 0xbe, 0x08 }, + { 826000000, 62500, 0xf6, 0x08 }, + { 999999999, 62500, 0xfe, 0x08 }, + } +}; + /* ----------------------------------------------------------- */ static struct dvb_pll_desc *pll_list[] = { @@ -361,6 +407,7 @@ static struct dvb_pll_desc *pll_list[] = { [DVB_PLL_SAMSUNG_TBMV] = &dvb_pll_samsung_tbmv, [DVB_PLL_PHILIPS_SD1878_TDA8261] = &dvb_pll_philips_sd1878_tda8261, [DVB_PLL_OPERA1] = &dvb_pll_opera1, + [DVB_PLL_SAMSUNG_DTOS403IH102A] = &dvb_pll_samsung_dtos403ih102a, }; /* ----------------------------------------------------------- */ diff --git a/linux/drivers/media/dvb/frontends/dvb-pll.h b/linux/drivers/media/dvb/frontends/dvb-pll.h index 872ca29e7..05239f579 100644 --- a/linux/drivers/media/dvb/frontends/dvb-pll.h +++ b/linux/drivers/media/dvb/frontends/dvb-pll.h @@ -22,6 +22,7 @@ #define DVB_PLL_SAMSUNG_TBMV 11 #define DVB_PLL_PHILIPS_SD1878_TDA8261 12 #define DVB_PLL_OPERA1 13 +#define DVB_PLL_SAMSUNG_DTOS403IH102A 14 /** * Attach a dvb-pll to the supplied frontend structure. diff --git a/linux/drivers/media/dvb/frontends/s5h1409.c b/linux/drivers/media/dvb/frontends/s5h1409.c index b999ec424..5ddb2dca3 100644 --- a/linux/drivers/media/dvb/frontends/s5h1409.c +++ b/linux/drivers/media/dvb/frontends/s5h1409.c @@ -26,7 +26,6 @@ #include <linux/slab.h> #include <linux/delay.h> #include "dvb_frontend.h" -#include "dvb-pll.h" #include "s5h1409.h" struct s5h1409_state { diff --git a/linux/drivers/media/dvb/frontends/s5h1411.c b/linux/drivers/media/dvb/frontends/s5h1411.c index eb5bfc99d..cff360ce1 100644 --- a/linux/drivers/media/dvb/frontends/s5h1411.c +++ b/linux/drivers/media/dvb/frontends/s5h1411.c @@ -26,7 +26,6 @@ #include <linux/slab.h> #include <linux/delay.h> #include "dvb_frontend.h" -#include "dvb-pll.h" #include "s5h1411.h" struct s5h1411_state { diff --git a/linux/drivers/media/dvb/frontends/tda10023.c b/linux/drivers/media/dvb/frontends/tda10023.c index 3195a80a9..82d6cb5b8 100644 --- a/linux/drivers/media/dvb/frontends/tda10023.c +++ b/linux/drivers/media/dvb/frontends/tda10023.c @@ -38,17 +38,24 @@ #include "dvb_frontend.h" #include "tda1002x.h" +#define REG0_INIT_VAL 0x23 struct tda10023_state { struct i2c_adapter* i2c; /* configuration settings */ - const struct tda1002x_config* config; + const struct tda10023_config *config; struct dvb_frontend frontend; u8 pwm; u8 reg0; -}; + /* clock settings */ + u32 xtal; + u8 pll_m; + u8 pll_p; + u8 pll_n; + u32 sysclk; +}; #if 0 #define dprintk(x...) printk(x) @@ -58,59 +65,6 @@ struct tda10023_state { static int verbose; -#define XTAL 28920000UL -#define PLL_M 8UL -#define PLL_P 4UL -#define PLL_N 1UL -#define SYSCLK (XTAL*PLL_M/(PLL_N*PLL_P)) // -> 57840000 - -static u8 tda10023_inittab[]={ - // reg mask val - 0x2a,0xff,0x02, // PLL3, Bypass, Power Down - 0xff,0x64,0x00, // Sleep 100ms - 0x2a,0xff,0x03, // PLL3, Bypass, Power Down - 0xff,0x64,0x00, // Sleep 100ms - 0x28,0xff,PLL_M-1, // PLL1 M=8 - 0x29,0xff,((PLL_P-1)<<6)|(PLL_N-1), // PLL2 - 0x00,0xff,0x23, // GPR FSAMPLING=1 - 0x2a,0xff,0x08, // PLL3 PSACLK=1 - 0xff,0x64,0x00, // Sleep 100ms - 0x1f,0xff,0x00, // RESET - 0xff,0x64,0x00, // Sleep 100ms - 0xe6,0x0c,0x04, // RSCFG_IND - 0x10,0xc0,0x80, // DECDVBCFG1 PBER=1 - - 0x0e,0xff,0x82, // GAIN1 - 0x03,0x08,0x08, // CLKCONF DYN=1 - 0x2e,0xbf,0x30, // AGCCONF2 TRIAGC=0,POSAGC=ENAGCIF=1 PPWMTUN=0 PPWMIF=0 - 0x01,0xff,0x30, // AGCREF - 0x1e,0x84,0x84, // CONTROL SACLK_ON=1 - 0x1b,0xff,0xc8, // ADC TWOS=1 - 0x3b,0xff,0xff, // IFMAX - 0x3c,0xff,0x00, // IFMIN - 0x34,0xff,0x00, // PWMREF - 0x35,0xff,0xff, // TUNMAX - 0x36,0xff,0x00, // TUNMIN - 0x06,0xff,0x7f, // EQCONF1 POSI=7 ENADAPT=ENEQUAL=DFE=1 // 0x77 - 0x1c,0x30,0x30, // EQCONF2 STEPALGO=SGNALGO=1 - 0x37,0xff,0xf6, // DELTAF_LSB - 0x38,0xff,0xff, // DELTAF_MSB - 0x02,0xff,0x93, // AGCCONF1 IFS=1 KAGCIF=2 KAGCTUN=3 - 0x2d,0xff,0xf6, // SWEEP SWPOS=1 SWDYN=7 SWSTEP=1 SWLEN=2 - 0x04,0x10,0x00, // SWRAMP=1 - 0x12,0xff,0xa1, // INTP1 POCLKP=1 FEL=1 MFS=0 - 0x2b,0x01,0xa1, // INTS1 - 0x20,0xff,0x04, // INTP2 SWAPP=? MSBFIRSTP=? INTPSEL=? - 0x2c,0xff,0x0d, // INTP/S TRIP=0 TRIS=0 - 0xc4,0xff,0x00, - 0xc3,0x30,0x00, - 0xb5,0xff,0x19, // ERAGC_THD - 0x00,0x03,0x01, // GPR, CLBS soft reset - 0x00,0x03,0x03, // GPR, CLBS soft reset - 0xff,0x64,0x00, // Sleep 100ms - 0xff,0xff,0xff -}; - static u8 tda10023_readreg (struct tda10023_state* state, u8 reg) { u8 b0 [] = { reg }; @@ -219,30 +173,34 @@ static int tda10023_set_symbolrate (struct tda10023_state* state, u32 sr) s16 SFIL=0; u16 NDEC = 0; - if (sr < (u32)(SYSCLK/98.40)) { + /* avoid floating point operations multiplying syscloc and divider + by 10 */ + u32 sysclk_x_10 = state->sysclk * 10; + + if (sr < (u32)(sysclk_x_10/984)) { NDEC=3; SFIL=1; - } else if (sr<(u32)(SYSCLK/64.0)) { + } else if (sr < (u32)(sysclk_x_10/640)) { NDEC=3; SFIL=0; - } else if (sr<(u32)(SYSCLK/49.2)) { + } else if (sr < (u32)(sysclk_x_10/492)) { NDEC=2; SFIL=1; - } else if (sr<(u32)(SYSCLK/32.0)) { + } else if (sr < (u32)(sysclk_x_10/320)) { NDEC=2; SFIL=0; - } else if (sr<(u32)(SYSCLK/24.6)) { + } else if (sr < (u32)(sysclk_x_10/246)) { NDEC=1; SFIL=1; - } else if (sr<(u32)(SYSCLK/16.0)) { + } else if (sr < (u32)(sysclk_x_10/160)) { NDEC=1; SFIL=0; - } else if (sr<(u32)(SYSCLK/12.3)) { + } else if (sr < (u32)(sysclk_x_10/123)) { NDEC=0; SFIL=1; } - BDRI=SYSCLK*16; + BDRI = (state->sysclk)*16; BDRI>>=NDEC; BDRI +=sr/2; BDRI /=sr; @@ -255,11 +213,12 @@ static int tda10023_set_symbolrate (struct tda10023_state* state, u32 sr) BDRX=1<<(24+NDEC); BDRX*=sr; - do_div(BDRX,SYSCLK); // BDRX/=SYSCLK; + do_div(BDRX, state->sysclk); /* BDRX/=SYSCLK; */ BDR=(s32)BDRX; } -// printk("Symbolrate %i, BDR %i BDRI %i, NDEC %i\n",sr,BDR,BDRI,NDEC); + dprintk("Symbolrate %i, BDR %i BDRI %i, NDEC %i\n", + sr, BDR, BDRI, NDEC); tda10023_writebit (state, 0x03, 0xc0, NDEC<<6); tda10023_writereg (state, 0x0a, BDR&255); tda10023_writereg (state, 0x0b, (BDR>>8)&255); @@ -272,8 +231,63 @@ static int tda10023_set_symbolrate (struct tda10023_state* state, u32 sr) static int tda10023_init (struct dvb_frontend *fe) { struct tda10023_state* state = fe->demodulator_priv; + u8 tda10023_inittab[] = { +/* reg mask val */ +/* 000 */ 0x2a, 0xff, 0x02, /* PLL3, Bypass, Power Down */ +/* 003 */ 0xff, 0x64, 0x00, /* Sleep 100ms */ +/* 006 */ 0x2a, 0xff, 0x03, /* PLL3, Bypass, Power Down */ +/* 009 */ 0xff, 0x64, 0x00, /* Sleep 100ms */ + /* PLL1 */ +/* 012 */ 0x28, 0xff, (state->pll_m-1), + /* PLL2 */ +/* 015 */ 0x29, 0xff, ((state->pll_p-1)<<6)|(state->pll_n-1), + /* GPR FSAMPLING=1 */ +/* 018 */ 0x00, 0xff, REG0_INIT_VAL, +/* 021 */ 0x2a, 0xff, 0x08, /* PLL3 PSACLK=1 */ +/* 024 */ 0xff, 0x64, 0x00, /* Sleep 100ms */ +/* 027 */ 0x1f, 0xff, 0x00, /* RESET */ +/* 030 */ 0xff, 0x64, 0x00, /* Sleep 100ms */ +/* 033 */ 0xe6, 0x0c, 0x04, /* RSCFG_IND */ +/* 036 */ 0x10, 0xc0, 0x80, /* DECDVBCFG1 PBER=1 */ + +/* 039 */ 0x0e, 0xff, 0x82, /* GAIN1 */ +/* 042 */ 0x03, 0x08, 0x08, /* CLKCONF DYN=1 */ +/* 045 */ 0x2e, 0xbf, 0x30, /* AGCCONF2 TRIAGC=0,POSAGC=ENAGCIF=1 + PPWMTUN=0 PPWMIF=0 */ +/* 048 */ 0x01, 0xff, 0x30, /* AGCREF */ +/* 051 */ 0x1e, 0x84, 0x84, /* CONTROL SACLK_ON=1 */ +/* 054 */ 0x1b, 0xff, 0xc8, /* ADC TWOS=1 */ +/* 057 */ 0x3b, 0xff, 0xff, /* IFMAX */ +/* 060 */ 0x3c, 0xff, 0x00, /* IFMIN */ +/* 063 */ 0x34, 0xff, 0x00, /* PWMREF */ +/* 066 */ 0x35, 0xff, 0xff, /* TUNMAX */ +/* 069 */ 0x36, 0xff, 0x00, /* TUNMIN */ +/* 072 */ 0x06, 0xff, 0x7f, /* EQCONF1 POSI=7 ENADAPT=ENEQUAL=DFE=1 */ +/* 075 */ 0x1c, 0x30, 0x30, /* EQCONF2 STEPALGO=SGNALGO=1 */ +/* 078 */ 0x37, 0xff, 0xf6, /* DELTAF_LSB */ +/* 081 */ 0x38, 0xff, 0xff, /* DELTAF_MSB */ +/* 084 */ 0x02, 0xff, 0x93, /* AGCCONF1 IFS=1 KAGCIF=2 KAGCTUN=3 */ +/* 087 */ 0x2d, 0xff, 0xf6, /* SWEEP SWPOS=1 SWDYN=7 SWSTEP=1 SWLEN=2 */ +/* 090 */ 0x04, 0x10, 0x00, /* SWRAMP=1 */ +/* 093 */ 0x12, 0xff, 0xa1, /* INTP1 POCLKP=1 FEL=1 MFS=0 */ +/* 096 */ 0x2b, 0x01, 0xa1, /* INTS1 */ +/* 099 */ 0x20, 0xff, 0x04, /* INTP2 SWAPP=? MSBFIRSTP=? INTPSEL=? */ +/* 102 */ 0x2c, 0xff, 0x0d, /* INTP/S TRIP=0 TRIS=0 */ +/* 105 */ 0xc4, 0xff, 0x00, +/* 108 */ 0xc3, 0x30, 0x00, +/* 111 */ 0xb5, 0xff, 0x19, /* ERAGC_THD */ +/* 114 */ 0x00, 0x03, 0x01, /* GPR, CLBS soft reset */ +/* 117 */ 0x00, 0x03, 0x03, /* GPR, CLBS soft reset */ +/* 120 */ 0xff, 0x64, 0x00, /* Sleep 100ms */ +/* 123 */ 0xff, 0xff, 0xff +}; + dprintk("DVB: TDA10023(%d): init chip\n", fe->dvb->num); - dprintk("DVB: TDA10023(%d): init chip\n", fe->adapter->num); + /* override default values if set in config */ + if (state->config->deltaf) { + tda10023_inittab[80] = (state->config->deltaf & 0xff); + tda10023_inittab[83] = (state->config->deltaf >> 8); + } tda10023_writetab(state, tda10023_inittab); @@ -460,12 +474,11 @@ static void tda10023_release(struct dvb_frontend* fe) static struct dvb_frontend_ops tda10023_ops; -struct dvb_frontend* tda10023_attach(const struct tda1002x_config* config, - struct i2c_adapter* i2c, +struct dvb_frontend *tda10023_attach(const struct tda10023_config *config, + struct i2c_adapter *i2c, u8 pwm) { struct tda10023_state* state = NULL; - int i; /* allocate memory for the internal state */ state = kmalloc(sizeof(struct tda10023_state), GFP_KERNEL); @@ -474,22 +487,40 @@ struct dvb_frontend* tda10023_attach(const struct tda1002x_config* config, /* setup the state */ state->config = config; state->i2c = i2c; - memcpy(&state->frontend.ops, &tda10023_ops, sizeof(struct dvb_frontend_ops)); - state->pwm = pwm; - for (i=0; i < ARRAY_SIZE(tda10023_inittab);i+=3) { - if (tda10023_inittab[i] == 0x00) { - state->reg0 = tda10023_inittab[i+2]; - break; - } - } - // Wakeup if in standby + /* wakeup if in standby */ tda10023_writereg (state, 0x00, 0x33); /* check if the demod is there */ if ((tda10023_readreg(state, 0x1a) & 0xf0) != 0x70) goto error; /* create dvb_frontend */ memcpy(&state->frontend.ops, &tda10023_ops, sizeof(struct dvb_frontend_ops)); + state->pwm = pwm; + state->reg0 = REG0_INIT_VAL; + if (state->config->xtal) { + state->xtal = state->config->xtal; + state->pll_m = state->config->pll_m; + state->pll_p = state->config->pll_p; + state->pll_n = state->config->pll_n; + } else { + /* set default values if not defined in config */ + state->xtal = 28920000; + state->pll_m = 8; + state->pll_p = 4; + state->pll_n = 1; + } + + /* calc sysclk */ + state->sysclk = (state->xtal * state->pll_m / \ + (state->pll_n * state->pll_p)); + + state->frontend.ops.info.symbol_rate_min = (state->sysclk/2)/64; + state->frontend.ops.info.symbol_rate_max = (state->sysclk/2)/4; + + dprintk("DVB: TDA10023 %s: xtal:%d pll_m:%d pll_p:%d pll_n:%d\n", + __func__, state->xtal, state->pll_m, state->pll_p, + state->pll_n); + state->frontend.demodulator_priv = state; return &state->frontend; @@ -504,10 +535,10 @@ static struct dvb_frontend_ops tda10023_ops = { .name = "Philips TDA10023 DVB-C", .type = FE_QAM, .frequency_stepsize = 62500, - .frequency_min = 47000000, + .frequency_min = 47000000, .frequency_max = 862000000, - .symbol_rate_min = (SYSCLK/2)/64, /* SACLK/64 == (SYSCLK/2)/64 */ - .symbol_rate_max = (SYSCLK/2)/4, /* SACLK/4 */ + .symbol_rate_min = 0, /* set in tda10023_attach */ + .symbol_rate_max = 0, /* set in tda10023_attach */ #if 0 .frequency_tolerance = ???, .symbol_rate_tolerance = ???, /* ppm */ /* == 8% (spec p. 5) */ diff --git a/linux/drivers/media/dvb/frontends/tda1002x.h b/linux/drivers/media/dvb/frontends/tda1002x.h index 1bcc0d44b..4522b7ef5 100644 --- a/linux/drivers/media/dvb/frontends/tda1002x.h +++ b/linux/drivers/media/dvb/frontends/tda1002x.h @@ -26,11 +26,25 @@ #include <linux/dvb/frontend.h> -struct tda1002x_config -{ +struct tda1002x_config { + /* the demodulator's i2c address */ + u8 demod_address; + u8 invert; +}; + +struct tda10023_config { /* the demodulator's i2c address */ u8 demod_address; u8 invert; + + /* clock settings */ + u32 xtal; /* defaults: 28920000 */ + u8 pll_m; /* defaults: 8 */ + u8 pll_p; /* defaults: 4 */ + u8 pll_n; /* defaults: 1 */ + + /* input freq offset + baseband conversion type */ + u16 deltaf; }; #if defined(CONFIG_DVB_TDA10021) || (defined(CONFIG_DVB_TDA10021_MODULE) && defined(MODULE)) @@ -45,12 +59,15 @@ static inline struct dvb_frontend* tda10021_attach(const struct tda1002x_config* } #endif // CONFIG_DVB_TDA10021 -#if defined(CONFIG_DVB_TDA10023) || (defined(CONFIG_DVB_TDA10023_MODULE) && defined(MODULE)) -extern struct dvb_frontend* tda10023_attach(const struct tda1002x_config* config, - struct i2c_adapter* i2c, u8 pwm); +#if defined(CONFIG_DVB_TDA10023) || \ + (defined(CONFIG_DVB_TDA10023_MODULE) && defined(MODULE)) +extern struct dvb_frontend *tda10023_attach( + const struct tda10023_config *config, + struct i2c_adapter *i2c, u8 pwm); #else -static inline struct dvb_frontend* tda10023_attach(const struct tda1002x_config* config, - struct i2c_adapter* i2c, u8 pwm) +static inline struct dvb_frontend *tda10023_attach( + const struct tda1002x_config *config, + struct i2c_adapter *i2c, u8 pwm) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; diff --git a/linux/drivers/media/dvb/ttpci/budget-av.c b/linux/drivers/media/dvb/ttpci/budget-av.c index b30a5288e..b7d1f2f18 100644 --- a/linux/drivers/media/dvb/ttpci/budget-av.c +++ b/linux/drivers/media/dvb/ttpci/budget-av.c @@ -667,6 +667,11 @@ static struct tda1002x_config philips_cu1216_config_altaddress = { .invert = 0, }; +static struct tda10023_config philips_cu1216_tda10023_config = { + .demod_address = 0x0c, + .invert = 1, +}; + static int philips_tu1216_tuner_init(struct dvb_frontend *fe) { struct budget *budget = (struct budget *) fe->dvb->priv; @@ -1019,9 +1024,10 @@ static void frontend_init(struct budget_av *budget_av) case SUBID_DVBC_KNC1_PLUS_MK3: budget_av->reinitialise_demod = 1; budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240; - fe = dvb_attach(tda10023_attach, &philips_cu1216_config, - &budget_av->budget.i2c_adap, - read_pwm(budget_av)); + fe = dvb_attach(tda10023_attach, + &philips_cu1216_tda10023_config, + &budget_av->budget.i2c_adap, + read_pwm(budget_av)); if (fe) { fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params; } diff --git a/linux/drivers/media/dvb/ttusb-dec/Kconfig b/linux/drivers/media/dvb/ttusb-dec/Kconfig index 0712899e3..a23cc0aa1 100644 --- a/linux/drivers/media/dvb/ttusb-dec/Kconfig +++ b/linux/drivers/media/dvb/ttusb-dec/Kconfig @@ -1,6 +1,6 @@ config DVB_TTUSB_DEC tristate "Technotrend/Hauppauge USB DEC devices" - depends on DVB_CORE && USB + depends on DVB_CORE && USB && INPUT depends on HOTPLUG # due to FW_LOADER select FW_LOADER select CRC32 diff --git a/linux/drivers/media/video/au0828/Kconfig b/linux/drivers/media/video/au0828/Kconfig index def10d086..52b249158 100644 --- a/linux/drivers/media/video/au0828/Kconfig +++ b/linux/drivers/media/video/au0828/Kconfig @@ -1,7 +1,7 @@ config VIDEO_AU0828 tristate "Auvitek AU0828 support" - depends on VIDEO_DEV && I2C && INPUT && DVB_CORE && USB + depends on I2C && INPUT && DVB_CORE && USB select I2C_ALGOBIT select VIDEO_TVEEPROM select DVB_AU8522 if !DVB_FE_CUSTOMIZE diff --git a/linux/drivers/media/video/au0828/au0828-dvb.c b/linux/drivers/media/video/au0828/au0828-dvb.c index 8ec55d2a2..709a703fe 100644 --- a/linux/drivers/media/video/au0828/au0828-dvb.c +++ b/linux/drivers/media/video/au0828/au0828-dvb.c @@ -381,12 +381,6 @@ int au0828_dvb_register(struct au0828_dev *dev) return -1; } - /* Put the analog decoder in standby to keep it quiet */ - au0828_call_i2c_clients(dev, TUNER_SET_STANDBY, NULL); - - if (dvb->frontend->ops.analog_ops.standby) - dvb->frontend->ops.analog_ops.standby(dvb->frontend); - /* register everything */ ret = dvb_register(dev); if (ret < 0) { diff --git a/linux/drivers/media/video/bt8xx/bttv-driver.c b/linux/drivers/media/video/bt8xx/bttv-driver.c index 303422115..a836e0ed4 100644 --- a/linux/drivers/media/video/bt8xx/bttv-driver.c +++ b/linux/drivers/media/video/bt8xx/bttv-driver.c @@ -2654,7 +2654,7 @@ static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf) struct bttv_fh *fh = priv; mutex_lock(&fh->cap.vb_lock); - retval = videobuf_mmap_setup(&fh->cap, gbuffers, gbufsize, + retval = __videobuf_mmap_setup(&fh->cap, gbuffers, gbufsize, V4L2_MEMORY_MMAP); if (retval < 0) { mutex_unlock(&fh->cap.vb_lock); diff --git a/linux/drivers/media/video/cx18/cx18-av-core.c b/linux/drivers/media/video/cx18/cx18-av-core.c index 66864904c..9a2675161 100644 --- a/linux/drivers/media/video/cx18/cx18-av-core.c +++ b/linux/drivers/media/video/cx18/cx18-av-core.c @@ -182,14 +182,16 @@ static void input_change(struct cx18 *cx) if (std == V4L2_STD_NTSC_M_JP) { /* Japan uses EIAJ audio standard */ cx18_av_write(cx, 0x808, 0xf7); + cx18_av_write(cx, 0x80b, 0x02); } else if (std == V4L2_STD_NTSC_M_KR) { /* South Korea uses A2 audio standard */ cx18_av_write(cx, 0x808, 0xf8); + cx18_av_write(cx, 0x80b, 0x03); } else { /* Others use the BTSC audio standard */ cx18_av_write(cx, 0x808, 0xf6); + cx18_av_write(cx, 0x80b, 0x01); } - cx18_av_write(cx, 0x80b, 0x00); } else if (std & V4L2_STD_PAL) { /* Follow tuner change procedure for PAL */ cx18_av_write(cx, 0x808, 0xff); @@ -741,8 +743,8 @@ static void log_audio_status(struct cx18 *cx) { struct cx18_av_state *state = &cx->av_state; u8 download_ctl = cx18_av_read(cx, 0x803); - u8 mod_det_stat0 = cx18_av_read(cx, 0x805); - u8 mod_det_stat1 = cx18_av_read(cx, 0x804); + u8 mod_det_stat0 = cx18_av_read(cx, 0x804); + u8 mod_det_stat1 = cx18_av_read(cx, 0x805); u8 audio_config = cx18_av_read(cx, 0x808); u8 pref_mode = cx18_av_read(cx, 0x809); u8 afc0 = cx18_av_read(cx, 0x80b); @@ -760,12 +762,12 @@ static void log_audio_status(struct cx18 *cx) case 0x12: p = "dual with SAP"; break; case 0x14: p = "tri with SAP"; break; case 0xfe: p = "forced mode"; break; - default: p = "not defined"; + default: p = "not defined"; break; } CX18_INFO("Detected audio mode: %s\n", p); switch (mod_det_stat1) { - case 0x00: p = "BTSC"; break; + case 0x00: p = "not defined"; break; case 0x01: p = "EIAJ"; break; case 0x02: p = "A2-M"; break; case 0x03: p = "A2-BG"; break; @@ -779,8 +781,13 @@ static void log_audio_status(struct cx18 *cx) case 0x0b: p = "NICAM-I"; break; case 0x0c: p = "NICAM-L"; break; case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break; + case 0x0e: p = "IF FM Radio"; break; + case 0x0f: p = "BTSC"; break; + case 0x10: p = "detected chrominance"; break; + case 0xfd: p = "unknown audio standard"; break; + case 0xfe: p = "forced audio standard"; break; case 0xff: p = "no detected audio standard"; break; - default: p = "not defined"; + default: p = "not defined"; break; } CX18_INFO("Detected audio standard: %s\n", p); CX18_INFO("Audio muted: %s\n", @@ -789,22 +796,23 @@ static void log_audio_status(struct cx18 *cx) (download_ctl & 0x10) ? "running" : "stopped"); switch (audio_config >> 4) { - case 0x00: p = "BTSC"; break; - case 0x01: p = "EIAJ"; break; - case 0x02: p = "A2-M"; break; - case 0x03: p = "A2-BG"; break; - case 0x04: p = "A2-DK1"; break; - case 0x05: p = "A2-DK2"; break; - case 0x06: p = "A2-DK3"; break; - case 0x07: p = "A1 (6.0 MHz FM Mono)"; break; - case 0x08: p = "AM-L"; break; - case 0x09: p = "NICAM-BG"; break; - case 0x0a: p = "NICAM-DK"; break; - case 0x0b: p = "NICAM-I"; break; - case 0x0c: p = "NICAM-L"; break; - case 0x0d: p = "FM radio"; break; + case 0x00: p = "undefined"; break; + case 0x01: p = "BTSC"; break; + case 0x02: p = "EIAJ"; break; + case 0x03: p = "A2-M"; break; + case 0x04: p = "A2-BG"; break; + case 0x05: p = "A2-DK1"; break; + case 0x06: p = "A2-DK2"; break; + case 0x07: p = "A2-DK3"; break; + case 0x08: p = "A1 (6.0 MHz FM Mono)"; break; + case 0x09: p = "AM-L"; break; + case 0x0a: p = "NICAM-BG"; break; + case 0x0b: p = "NICAM-DK"; break; + case 0x0c: p = "NICAM-I"; break; + case 0x0d: p = "NICAM-L"; break; + case 0x0e: p = "FM radio"; break; case 0x0f: p = "automatic detection"; break; - default: p = "undefined"; + default: p = "undefined"; break; } CX18_INFO("Configured audio standard: %s\n", p); @@ -815,12 +823,9 @@ static void log_audio_status(struct cx18 *cx) case 0x02: p = "MONO3 (STEREO forced MONO)"; break; case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break; case 0x04: p = "STEREO"; break; - case 0x05: p = "DUAL1 (AB)"; break; - case 0x06: p = "DUAL2 (AC) (FM)"; break; - case 0x07: p = "DUAL3 (BC) (FM)"; break; - case 0x08: p = "DUAL4 (AC) (AM)"; break; - case 0x09: p = "DUAL5 (BC) (AM)"; break; - case 0x0a: p = "SAP"; break; + case 0x05: p = "DUAL1 (AC)"; break; + case 0x06: p = "DUAL2 (BC)"; break; + case 0x07: p = "DUAL3 (AB)"; break; default: p = "undefined"; } CX18_INFO("Configured audio mode: %s\n", p); @@ -835,9 +840,11 @@ static void log_audio_status(struct cx18 *cx) case 0x06: p = "BTSC"; break; case 0x07: p = "EIAJ"; break; case 0x08: p = "A2-M"; break; - case 0x09: p = "FM Radio"; break; + case 0x09: p = "FM Radio (4.5 MHz)"; break; + case 0x0a: p = "FM Radio (5.5 MHz)"; break; + case 0x0b: p = "S-Video"; break; case 0x0f: p = "automatic standard and mode detection"; break; - default: p = "undefined"; + default: p = "undefined"; break; } CX18_INFO("Configured audio system: %s\n", p); } @@ -857,22 +864,24 @@ static void log_audio_status(struct cx18 *cx) case 5: p = "language AC"; break; case 6: p = "language BC"; break; case 7: p = "language AB"; break; - default: p = "undefined"; + default: p = "undefined"; break; } CX18_INFO("Preferred audio mode: %s\n", p); if ((audio_config & 0xf) == 0xf) { - switch ((afc0 >> 2) & 0x1) { + switch ((afc0 >> 3) & 0x1) { case 0: p = "system DK"; break; case 1: p = "system L"; break; } CX18_INFO("Selected 65 MHz format: %s\n", p); - switch (afc0 & 0x3) { - case 0: p = "BTSC"; break; - case 1: p = "EIAJ"; break; - case 2: p = "A2-M"; break; - default: p = "undefined"; + switch (afc0 & 0x7) { + case 0: p = "Chroma"; break; + case 1: p = "BTSC"; break; + case 2: p = "EIAJ"; break; + case 3: p = "A2-M"; break; + case 4: p = "autodetect"; break; + default: p = "undefined"; break; } CX18_INFO("Selected 45 MHz format: %s\n", p); } diff --git a/linux/drivers/media/video/cx18/cx18-cards.c b/linux/drivers/media/video/cx18/cx18-cards.c index 553adbf2c..baccd0792 100644 --- a/linux/drivers/media/video/cx18/cx18-cards.c +++ b/linux/drivers/media/video/cx18/cx18-cards.c @@ -126,7 +126,7 @@ static const struct cx18_card cx18_card_hvr1600_samsung = { /* ------------------------------------------------------------------------- */ -/* Compro VideoMate H900: not working at the moment! */ +/* Compro VideoMate H900: note that this card is analog only! */ static const struct cx18_card_pci_info cx18_pci_h900[] = { { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_COMPRO, 0xe100 }, @@ -136,7 +136,7 @@ static const struct cx18_card_pci_info cx18_pci_h900[] = { static const struct cx18_card cx18_card_h900 = { .type = CX18_CARD_COMPRO_H900, .name = "Compro VideoMate H900", - .comment = "DVB & VBI are not yet supported\n", + .comment = "VBI is not yet supported\n", .v4l2_capabilities = CX18_CAP_ENCODER, .hw_audio_ctrl = CX18_HW_CX23418, .hw_all = CX18_HW_TUNER, diff --git a/linux/drivers/media/video/cx18/cx18-controls.c b/linux/drivers/media/video/cx18/cx18-controls.c index 2bdac5ebb..87cf41021 100644 --- a/linux/drivers/media/video/cx18/cx18-controls.c +++ b/linux/drivers/media/video/cx18/cx18-controls.c @@ -159,7 +159,7 @@ static int cx18_setup_vbi_fmt(struct cx18 *cx, enum v4l2_mpeg_stream_vbi_fmt fmt { if (!(cx->v4l2_cap & V4L2_CAP_SLICED_VBI_CAPTURE)) return -EINVAL; - if (atomic_read(&cx->capturing) > 0) + if (atomic_read(&cx->ana_capturing) > 0) return -EBUSY; /* First try to allocate sliced VBI buffers if needed. */ @@ -235,7 +235,7 @@ int cx18_control_ioctls(struct cx18 *cx, unsigned int cmd, void *arg) CX18_DEBUG_IOCTL("VIDIOC_S_EXT_CTRLS\n"); if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) { struct cx2341x_mpeg_params p = cx->params; - int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->capturing), arg, cmd); + int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->ana_capturing), arg, cmd); if (err) return err; @@ -295,7 +295,7 @@ int cx18_control_ioctls(struct cx18 *cx, unsigned int cmd, void *arg) CX18_DEBUG_IOCTL("VIDIOC_TRY_EXT_CTRLS\n"); if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) return cx2341x_ext_ctrls(&cx->params, - atomic_read(&cx->capturing), arg, cmd); + atomic_read(&cx->ana_capturing), arg, cmd); return -EINVAL; } diff --git a/linux/drivers/media/video/cx18/cx18-driver.c b/linux/drivers/media/video/cx18/cx18-driver.c index 008745af2..d654b1d6e 100644 --- a/linux/drivers/media/video/cx18/cx18-driver.c +++ b/linux/drivers/media/video/cx18/cx18-driver.c @@ -607,14 +607,14 @@ static int __devinit cx18_probe(struct pci_dev *dev, } cx = kzalloc(sizeof(struct cx18), GFP_ATOMIC); - if (cx == 0) { + if (!cx) { spin_unlock(&cx18_cards_lock); return -ENOMEM; } cx18_cards[cx18_cards_active] = cx; cx->dev = dev; cx->num = cx18_cards_active++; - snprintf(cx->name, sizeof(cx->name) - 1, "cx18-%d", cx->num); + snprintf(cx->name, sizeof(cx->name), "cx18-%d", cx->num); CX18_INFO("Initializing card #%d\n", cx->num); spin_unlock(&cx18_cards_lock); @@ -889,7 +889,7 @@ static void cx18_remove(struct pci_dev *pci_dev) /* Stop all captures */ CX18_DEBUG_INFO("Stopping all streams\n"); - if (atomic_read(&cx->capturing) > 0) + if (atomic_read(&cx->tot_capturing) > 0) cx18_stop_all_captures(cx); /* Interrupts */ diff --git a/linux/drivers/media/video/cx18/cx18-driver.h b/linux/drivers/media/video/cx18/cx18-driver.h index 548562b0c..d2b563f98 100644 --- a/linux/drivers/media/video/cx18/cx18-driver.h +++ b/linux/drivers/media/video/cx18/cx18-driver.h @@ -390,7 +390,8 @@ struct cx18 { int stream_buf_size[CX18_MAX_STREAMS]; /* Stream buffer size */ struct cx18_stream streams[CX18_MAX_STREAMS]; /* Stream data */ unsigned long i_flags; /* global cx18 flags */ - atomic_t capturing; /* count number of active capture streams */ + atomic_t ana_capturing; /* count number of active analog capture streams */ + atomic_t tot_capturing; /* total count number of active capture streams */ spinlock_t lock; /* lock access to this struct */ int search_pack_header; @@ -437,6 +438,10 @@ struct cx18 { #endif struct i2c_client *i2c_clients[I2C_CLIENTS_MAX]; + /* gpio */ + u32 gpio_dir; + u32 gpio_val; + /* v4l2 and User settings */ /* codec settings */ diff --git a/linux/drivers/media/video/cx18/cx18-fileops.c b/linux/drivers/media/video/cx18/cx18-fileops.c index f9f025992..f5f82c487 100644 --- a/linux/drivers/media/video/cx18/cx18-fileops.c +++ b/linux/drivers/media/video/cx18/cx18-fileops.c @@ -353,7 +353,7 @@ static ssize_t cx18_read(struct cx18_stream *s, char __user *ubuf, size_t tot_written = 0; int single_frame = 0; - if (atomic_read(&cx->capturing) == 0 && s->id == -1) { + if (atomic_read(&cx->ana_capturing) == 0 && s->id == -1) { /* shouldn't happen */ CX18_DEBUG_WARN("Stream %s not initialized before read\n", s->name); @@ -616,7 +616,7 @@ int cx18_v4l2_close(struct inode *inode, struct file *filp) cx18_call_i2c_clients(cx, VIDIOC_S_STD, &cx->std); /* Select correct audio input (i.e. TV tuner or Line in) */ cx18_audio_set_io(cx); - if (atomic_read(&cx->capturing) > 0) { + if (atomic_read(&cx->ana_capturing) > 0) { /* Undo video mute */ cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle, cx->params.video_mute | @@ -662,7 +662,7 @@ static int cx18_serialized_open(struct cx18_stream *s, struct file *filp) } if (!test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) { - if (atomic_read(&cx->capturing) > 0) { + if (atomic_read(&cx->ana_capturing) > 0) { /* switching to radio while capture is in progress is not polite */ cx18_release_stream(s); @@ -729,7 +729,7 @@ int cx18_v4l2_open(struct inode *inode, struct file *filp) void cx18_mute(struct cx18 *cx) { - if (atomic_read(&cx->capturing)) + if (atomic_read(&cx->ana_capturing)) cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, cx18_find_handle(cx), 1); CX18_DEBUG_INFO("Mute\n"); @@ -737,7 +737,7 @@ void cx18_mute(struct cx18 *cx) void cx18_unmute(struct cx18 *cx) { - if (atomic_read(&cx->capturing)) { + if (atomic_read(&cx->ana_capturing)) { cx18_msleep_timeout(100, 0); cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, cx18_find_handle(cx), 12); diff --git a/linux/drivers/media/video/cx18/cx18-gpio.c b/linux/drivers/media/video/cx18/cx18-gpio.c index bb8bc8608..2f324b846 100644 --- a/linux/drivers/media/video/cx18/cx18-gpio.c +++ b/linux/drivers/media/video/cx18/cx18-gpio.c @@ -35,9 +35,6 @@ #define CX18_REG_GPIO_OUT2 0xc78104 #define CX18_REG_GPIO_DIR2 0xc7810c -static u32 gpio_dir; -static u32 gpio_val; - /* * HVR-1600 GPIO pins, courtesy of Hauppauge: * @@ -49,24 +46,29 @@ static u32 gpio_val; static void gpio_write(struct cx18 *cx) { - write_reg((gpio_dir & 0xffff) << 16, CX18_REG_GPIO_DIR1); - write_reg(((gpio_dir & 0xffff) << 16) | (gpio_val & 0xffff), + u32 dir = cx->gpio_dir; + u32 val = cx->gpio_val; + + write_reg((dir & 0xffff) << 16, CX18_REG_GPIO_DIR1); + write_reg(((dir & 0xffff) << 16) | (val & 0xffff), CX18_REG_GPIO_OUT1); - write_reg(gpio_dir & 0xffff0000, CX18_REG_GPIO_DIR2); - write_reg((gpio_dir & 0xffff0000) | ((gpio_val & 0xffff0000) >> 16), + write_reg(dir & 0xffff0000, CX18_REG_GPIO_DIR2); + write_reg((dir & 0xffff0000) | ((val & 0xffff0000) >> 16), CX18_REG_GPIO_OUT2); } void cx18_gpio_init(struct cx18 *cx) { - gpio_dir = cx->card->gpio_init.direction; - gpio_val = cx->card->gpio_init.initial_value; + cx->gpio_dir = cx->card->gpio_init.direction; + cx->gpio_val = cx->card->gpio_init.initial_value; - if (gpio_dir == 0) - return; + if (cx->card->xceive_pin) { + cx->gpio_dir |= 1 << cx->card->xceive_pin; + cx->gpio_val |= 1 << cx->card->xceive_pin; + } - gpio_dir |= 1 << cx->card->xceive_pin; - gpio_val |= 1 << cx->card->xceive_pin; + if (cx->gpio_dir == 0) + return; CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n", read_reg(CX18_REG_GPIO_DIR1), read_reg(CX18_REG_GPIO_DIR2), @@ -86,13 +88,12 @@ int cx18_reset_tuner_gpio(void *dev, int cmd, int value) return 0; CX18_DEBUG_INFO("Resetting tuner\n"); - gpio_dir |= 1 << cx->card->xceive_pin; - gpio_val &= ~(1 << cx->card->xceive_pin); + cx->gpio_val &= ~(1 << cx->card->xceive_pin); gpio_write(cx); schedule_timeout_interruptible(msecs_to_jiffies(1)); - gpio_val |= 1 << cx->card->xceive_pin; + cx->gpio_val |= 1 << cx->card->xceive_pin; gpio_write(cx); schedule_timeout_interruptible(msecs_to_jiffies(1)); return 0; diff --git a/linux/drivers/media/video/cx18/cx18-ioctl.c b/linux/drivers/media/video/cx18/cx18-ioctl.c index fab35cc83..f008604f9 100644 --- a/linux/drivers/media/video/cx18/cx18-ioctl.c +++ b/linux/drivers/media/video/cx18/cx18-ioctl.c @@ -253,7 +253,7 @@ static int cx18_try_or_set_fmt(struct cx18 *cx, int streamtype, if (!set_fmt || (cx->params.width == w && cx->params.height == h)) return 0; - if (atomic_read(&cx->capturing) > 0) + if (atomic_read(&cx->ana_capturing) > 0) return -EBUSY; cx->params.width = w; @@ -270,7 +270,7 @@ static int cx18_try_or_set_fmt(struct cx18 *cx, int streamtype, if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) { if (set_fmt && streamtype == CX18_ENC_STREAM_TYPE_VBI && cx->vbi.sliced_in->service_set && - atomic_read(&cx->capturing) > 0) + atomic_read(&cx->ana_capturing) > 0) return -EBUSY; if (set_fmt) { cx->vbi.sliced_in->service_set = 0; @@ -299,7 +299,7 @@ static int cx18_try_or_set_fmt(struct cx18 *cx, int streamtype, return 0; if (set == 0) return -EINVAL; - if (atomic_read(&cx->capturing) > 0 && cx->vbi.sliced_in->service_set == 0) + if (atomic_read(&cx->ana_capturing) > 0 && cx->vbi.sliced_in->service_set == 0) return -EBUSY; cx18_av_cmd(cx, VIDIOC_S_FMT, fmt); memcpy(cx->vbi.sliced_in, vbifmt, sizeof(*cx->vbi.sliced_in)); @@ -587,7 +587,7 @@ int cx18_v4l2_ioctls(struct cx18 *cx, struct file *filp, unsigned cmd, void *arg break; if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags) || - atomic_read(&cx->capturing) > 0) { + atomic_read(&cx->ana_capturing) > 0) { /* Switching standard would turn off the radio or mess with already running streams, prevent that by returning EBUSY. */ @@ -704,7 +704,7 @@ int cx18_v4l2_ioctls(struct cx18 *cx, struct file *filp, unsigned cmd, void *arg enc->flags = 0; if (try) return 0; - if (!atomic_read(&cx->capturing)) + if (!atomic_read(&cx->ana_capturing)) return -EPERM; if (test_and_set_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags)) return 0; @@ -716,7 +716,7 @@ int cx18_v4l2_ioctls(struct cx18 *cx, struct file *filp, unsigned cmd, void *arg enc->flags = 0; if (try) return 0; - if (!atomic_read(&cx->capturing)) + if (!atomic_read(&cx->ana_capturing)) return -EPERM; if (!test_and_clear_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags)) return 0; diff --git a/linux/drivers/media/video/cx18/cx18-streams.c b/linux/drivers/media/video/cx18/cx18-streams.c index 39f2ef83d..352ff698a 100644 --- a/linux/drivers/media/video/cx18/cx18-streams.c +++ b/linux/drivers/media/video/cx18/cx18-streams.c @@ -446,7 +446,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) s->handle = data[0]; cx18_vapi(cx, CX18_CPU_SET_CHANNEL_TYPE, 2, s->handle, captype); - if (atomic_read(&cx->capturing) == 0 && !ts) { + if (atomic_read(&cx->ana_capturing) == 0 && !ts) { /* Stuff from Windows, we don't know what it is */ cx18_vapi(cx, CX18_CPU_SET_VER_CROP_LINE, 2, s->handle, 0); cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 3, 1); @@ -469,7 +469,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) cx2341x_update(cx, cx18_api_func, NULL, &cx->params); } - if (atomic_read(&cx->capturing) == 0) { + if (atomic_read(&cx->tot_capturing) == 0) { clear_bit(CX18_F_I_EOS, &cx->i_flags); write_reg(7, CX18_DSP0_INTERRUPT_MASK); } @@ -495,7 +495,9 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) } /* you're live! sit back and await interrupts :) */ - atomic_inc(&cx->capturing); + if (!ts) + atomic_inc(&cx->ana_capturing); + atomic_inc(&cx->tot_capturing); return 0; } @@ -526,7 +528,7 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) CX18_DEBUG_INFO("Stop Capture\n"); - if (atomic_read(&cx->capturing) == 0) + if (atomic_read(&cx->tot_capturing) == 0) return 0; if (s->type == CX18_ENC_STREAM_TYPE_MPG) @@ -567,7 +569,9 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) #endif } - atomic_dec(&cx->capturing); + if (s->type != CX18_ENC_STREAM_TYPE_TS) + atomic_dec(&cx->ana_capturing); + atomic_dec(&cx->tot_capturing); /* Clear capture and no-read bits */ clear_bit(CX18_F_S_STREAMING, &s->s_flags); @@ -575,7 +579,7 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle); s->handle = 0xffffffff; - if (atomic_read(&cx->capturing) > 0) + if (atomic_read(&cx->tot_capturing) > 0) return 0; write_reg(5, CX18_DSP0_INTERRUPT_MASK); diff --git a/linux/drivers/media/video/ivtv/ivtv-cards.c b/linux/drivers/media/video/ivtv/ivtv-cards.c index 753d28209..03455fb30 100644 --- a/linux/drivers/media/video/ivtv/ivtv-cards.c +++ b/linux/drivers/media/video/ivtv/ivtv-cards.c @@ -897,7 +897,6 @@ static const struct ivtv_card ivtv_card_pg600v2 = { { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL }, }, .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 }, - .gpio_init = { .direction = 0x1000, .initial_value = 0x1000 }, /* tuner reset */ .xceive_pin = 12, .tuners = { { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, @@ -945,7 +944,6 @@ static const struct ivtv_card ivtv_card_club3d = { { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL }, }, .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 }, - .gpio_init = { .direction = 0x1000, .initial_value = 0x1000 }, /* tuner reset */ .xceive_pin = 12, .tuners = { { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, @@ -981,7 +979,7 @@ static const struct ivtv_card ivtv_card_avertv_mce116 = { { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL, 1 }, }, /* enable line-in */ - .gpio_init = { .direction = 0xe400, .initial_value = 0x4400 }, + .gpio_init = { .direction = 0xe000, .initial_value = 0x4000 }, .xceive_pin = 10, .tuners = { { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, @@ -1124,7 +1122,7 @@ static const struct ivtv_card ivtv_card_aver_m104 = { }, .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO_SERIAL, 2 }, /* enable line-in + reset tuner */ - .gpio_init = { .direction = 0xe400, .initial_value = 0x4000 }, + .gpio_init = { .direction = 0xe000, .initial_value = 0x4000 }, .xceive_pin = 10, .tuners = { { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, @@ -1133,6 +1131,41 @@ static const struct ivtv_card ivtv_card_aver_m104 = { .i2c = &ivtv_i2c_std, }; +/* ------------------------------------------------------------------------- */ + +/* Buffalo PC-MV5L/PCI cards */ + +static const struct ivtv_card_pci_info ivtv_pci_buffalo[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_MELCO, 0x052b }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_buffalo = { + .type = IVTV_CARD_BUFFALO_MV5L, + .name = "Buffalo PC-MV5L/PCI", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_CX25840, + .hw_audio = IVTV_HW_CX25840, + .hw_audio_ctrl = IVTV_HW_CX25840, + .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, CX25840_COMPOSITE2 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, + CX25840_SVIDEO_LUMA3 | CX25840_SVIDEO_CHROMA4 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, CX25840_COMPOSITE1 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 }, + { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL }, + }, + .xceive_pin = 12, + .tuners = { + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + .pci_list = ivtv_pci_buffalo, + .i2c = &ivtv_i2c_std, +}; + static const struct ivtv_card *ivtv_card_list[] = { &ivtv_card_pvr250, &ivtv_card_pvr350, @@ -1159,6 +1192,7 @@ static const struct ivtv_card *ivtv_card_list[] = { &ivtv_card_aver_pvr150, &ivtv_card_aver_ezmaker, &ivtv_card_aver_m104, + &ivtv_card_buffalo, /* Variations of standard cards but with the same PCI IDs. These cards must come last in this list. */ diff --git a/linux/drivers/media/video/ivtv/ivtv-cards.h b/linux/drivers/media/video/ivtv/ivtv-cards.h index 748485dce..381af1bce 100644 --- a/linux/drivers/media/video/ivtv/ivtv-cards.h +++ b/linux/drivers/media/video/ivtv/ivtv-cards.h @@ -49,7 +49,8 @@ #define IVTV_CARD_AVER_PVR150PLUS 22 /* AVerMedia PVR-150 Plus */ #define IVTV_CARD_AVER_EZMAKER 23 /* AVerMedia EZMaker PCI Deluxe */ #define IVTV_CARD_AVER_M104 24 /* AverMedia M104 miniPCI card */ -#define IVTV_CARD_LAST 24 +#define IVTV_CARD_BUFFALO_MV5L 25 /* Buffalo PC-MV5L/PCI card */ +#define IVTV_CARD_LAST 25 /* Variants of existing cards but with the same PCI IDs. The driver detects these based on other device information. diff --git a/linux/drivers/media/video/ivtv/ivtv-driver.c b/linux/drivers/media/video/ivtv/ivtv-driver.c index b6f1fc7f4..094f5524f 100644 --- a/linux/drivers/media/video/ivtv/ivtv-driver.c +++ b/linux/drivers/media/video/ivtv/ivtv-driver.c @@ -191,6 +191,7 @@ MODULE_PARM_DESC(cardtype, "\t\t\t23 = AverMedia PVR-150 Plus\n" "\t\t\t24 = AverMedia EZMaker PCI Deluxe\n" "\t\t\t25 = AverMedia M104 (not yet working)\n" + "\t\t\t26 = Buffalo PC-MV5L/PCI\n" "\t\t\t 0 = Autodetect (default)\n" "\t\t\t-1 = Ignore this card\n\t\t"); MODULE_PARM_DESC(pal, "Set PAL standard: BGH, DK, I, M, N, Nc, 60"); @@ -1023,7 +1024,7 @@ static int __devinit ivtv_probe(struct pci_dev *dev, ivtv_cards[ivtv_cards_active] = itv; itv->dev = dev; itv->num = ivtv_cards_active++; - snprintf(itv->name, sizeof(itv->name) - 1, "ivtv%d", itv->num); + snprintf(itv->name, sizeof(itv->name), "ivtv%d", itv->num); IVTV_INFO("Initializing card #%d\n", itv->num); spin_unlock(&ivtv_cards_lock); diff --git a/linux/drivers/media/video/ivtv/ivtv-gpio.c b/linux/drivers/media/video/ivtv/ivtv-gpio.c index d8ac09f3c..bc22905ea 100644 --- a/linux/drivers/media/video/ivtv/ivtv-gpio.c +++ b/linux/drivers/media/video/ivtv/ivtv-gpio.c @@ -146,15 +146,20 @@ int ivtv_reset_tuner_gpio(void *dev, int cmd, int value) void ivtv_gpio_init(struct ivtv *itv) { - if (itv->card->gpio_init.direction == 0) + u16 pin = 0; + + if (itv->card->xceive_pin) + pin = 1 << itv->card->xceive_pin; + + if ((itv->card->gpio_init.direction | pin) == 0) return; IVTV_DEBUG_INFO("GPIO initial dir: %08x out: %08x\n", read_reg(IVTV_REG_GPIO_DIR), read_reg(IVTV_REG_GPIO_OUT)); /* init output data then direction */ - write_reg(itv->card->gpio_init.initial_value, IVTV_REG_GPIO_OUT); - write_reg(itv->card->gpio_init.direction, IVTV_REG_GPIO_DIR); + write_reg(itv->card->gpio_init.initial_value | pin, IVTV_REG_GPIO_OUT); + write_reg(itv->card->gpio_init.direction | pin, IVTV_REG_GPIO_DIR); } static struct v4l2_queryctrl gpio_ctrl_mute = { diff --git a/linux/drivers/media/video/ivtv/ivtv-version.h b/linux/drivers/media/video/ivtv/ivtv-version.h index 02c5ab071..442f43f11 100644 --- a/linux/drivers/media/video/ivtv/ivtv-version.h +++ b/linux/drivers/media/video/ivtv/ivtv-version.h @@ -22,8 +22,8 @@ #define IVTV_DRIVER_NAME "ivtv" #define IVTV_DRIVER_VERSION_MAJOR 1 -#define IVTV_DRIVER_VERSION_MINOR 2 -#define IVTV_DRIVER_VERSION_PATCHLEVEL 1 +#define IVTV_DRIVER_VERSION_MINOR 3 +#define IVTV_DRIVER_VERSION_PATCHLEVEL 0 #define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL) #define IVTV_DRIVER_VERSION KERNEL_VERSION(IVTV_DRIVER_VERSION_MAJOR,IVTV_DRIVER_VERSION_MINOR,IVTV_DRIVER_VERSION_PATCHLEVEL) diff --git a/linux/drivers/media/video/saa7134/saa7134-video.c b/linux/drivers/media/video/saa7134/saa7134-video.c index 3b7774305..b8444429a 100644 --- a/linux/drivers/media/video/saa7134/saa7134-video.c +++ b/linux/drivers/media/video/saa7134/saa7134-video.c @@ -1641,7 +1641,7 @@ static int saa7134_s_fmt_overlay(struct file *file, void *priv, struct saa7134_fh *fh = priv; struct saa7134_dev *dev = fh->dev; int err; - unsigned int flags; + unsigned long flags; if (saa7134_no_overlay > 0) { printk(KERN_ERR "V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); diff --git a/linux/drivers/media/video/tuner-core.c b/linux/drivers/media/video/tuner-core.c index d542d253b..314d89cef 100644 --- a/linux/drivers/media/video/tuner-core.c +++ b/linux/drivers/media/video/tuner-core.c @@ -575,7 +575,7 @@ static inline int check_mode(struct tuner *t, char *cmd) #if 0 tuner_dbg("Cmd %s rejected for mode %i\n", cmd,t->mode); #endif - return EINVAL; + return -EINVAL; } switch (t->mode) { @@ -769,11 +769,11 @@ static inline int set_mode(struct i2c_client *client, struct tuner *t, int mode, t->mode = mode; - if (check_mode(t, cmd) == EINVAL) { + if (check_mode(t, cmd) == -EINVAL) { t->mode = T_STANDBY; if (analog_ops->standby) analog_ops->standby(&t->fe); - return EINVAL; + return -EINVAL; } return 0; } @@ -821,13 +821,13 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) break; case AUDC_SET_RADIO: if (set_mode(client, t, V4L2_TUNER_RADIO, "AUDC_SET_RADIO") - == EINVAL) + == -EINVAL) return 0; if (t->radio_freq) set_freq(client, t->radio_freq); break; case TUNER_SET_STANDBY: - if (check_mode(t, "TUNER_SET_STANDBY") == EINVAL) + if (check_mode(t, "TUNER_SET_STANDBY") == -EINVAL) return 0; t->mode = T_STANDBY; if (analog_ops->standby) @@ -835,9 +835,9 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) break; #ifdef CONFIG_VIDEO_ALLOW_V4L1 case VIDIOCSAUDIO: - if (check_mode(t, "VIDIOCSAUDIO") == EINVAL) + if (check_mode(t, "VIDIOCSAUDIO") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; /* Should be implemented, since bttv calls it */ @@ -855,10 +855,10 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) }; struct video_channel *vc = arg; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; - if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==EINVAL) + if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==-EINVAL) return 0; if (vc->norm < ARRAY_SIZE(map)) @@ -872,9 +872,9 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { unsigned long *v = arg; - if (check_mode(t, "VIDIOCSFREQ") == EINVAL) + if (check_mode(t, "VIDIOCSFREQ") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; set_freq(client, *v); @@ -884,9 +884,9 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct video_tuner *vt = arg; - if (check_mode(t, "VIDIOCGTUNER") == EINVAL) + if (check_mode(t, "VIDIOCGTUNER") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; if (V4L2_TUNER_RADIO == t->mode) { @@ -928,9 +928,9 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct video_audio *va = arg; - if (check_mode(t, "VIDIOCGAUDIO") == EINVAL) + if (check_mode(t, "VIDIOCGAUDIO") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; if (V4L2_TUNER_RADIO == t->mode) { @@ -970,7 +970,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) v4l2_std_id *id = arg; if (set_mode (client, t, V4L2_TUNER_ANALOG_TV, "VIDIOC_S_STD") - == EINVAL) + == -EINVAL) return 0; switch_v4l2(); @@ -986,7 +986,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) struct v4l2_frequency *f = arg; if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY") - == EINVAL) + == -EINVAL) return 0; switch_v4l2(); set_freq(client,f->frequency); @@ -997,7 +997,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct v4l2_frequency *f = arg; - if (check_mode(t, "VIDIOC_G_FREQUENCY") == EINVAL) + if (check_mode(t, "VIDIOC_G_FREQUENCY") == -EINVAL) return 0; switch_v4l2(); f->type = t->mode; @@ -1018,7 +1018,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct v4l2_tuner *tuner = arg; - if (check_mode(t, "VIDIOC_G_TUNER") == EINVAL) + if (check_mode(t, "VIDIOC_G_TUNER") == -EINVAL) return 0; switch_v4l2(); @@ -1065,7 +1065,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct v4l2_tuner *tuner = arg; - if (check_mode(t, "VIDIOC_S_TUNER") == EINVAL) + if (check_mode(t, "VIDIOC_S_TUNER") == -EINVAL) return 0; switch_v4l2(); diff --git a/linux/drivers/media/video/videobuf-core.c b/linux/drivers/media/video/videobuf-core.c index fd838dddb..16c32c68c 100644 --- a/linux/drivers/media/video/videobuf-core.c +++ b/linux/drivers/media/video/videobuf-core.c @@ -332,7 +332,7 @@ int videobuf_mmap_free(struct videobuf_queue *q) } /* Locking: Caller holds q->vb_lock */ -static int __videobuf_mmap_setup(struct videobuf_queue *q, +int __videobuf_mmap_setup(struct videobuf_queue *q, unsigned int bcount, unsigned int bsize, enum v4l2_memory memory) { @@ -1130,6 +1130,7 @@ EXPORT_SYMBOL_GPL(videobuf_read_stream); EXPORT_SYMBOL_GPL(videobuf_read_one); EXPORT_SYMBOL_GPL(videobuf_poll_stream); +EXPORT_SYMBOL_GPL(__videobuf_mmap_setup); EXPORT_SYMBOL_GPL(videobuf_mmap_setup); EXPORT_SYMBOL_GPL(videobuf_mmap_free); EXPORT_SYMBOL_GPL(videobuf_mmap_mapper); diff --git a/linux/include/media/v4l2-dev.h b/linux/include/media/v4l2-dev.h index 42ae06c32..b542b7867 100644 --- a/linux/include/media/v4l2-dev.h +++ b/linux/include/media/v4l2-dev.h @@ -46,7 +46,6 @@ #define VFL_TYPE_VTX 3 /* Video standard functions */ -extern unsigned int v4l2_video_std_fps(struct v4l2_standard *vs); extern char *v4l2_norm_to_name(v4l2_std_id id); extern int v4l2_video_std_construct(struct v4l2_standard *vs, int id, char *name); diff --git a/linux/include/media/videobuf-core.h b/linux/include/media/videobuf-core.h index dd0821f40..a2f55ff24 100644 --- a/linux/include/media/videobuf-core.h +++ b/linux/include/media/videobuf-core.h @@ -241,6 +241,9 @@ unsigned int videobuf_poll_stream(struct file *file, int videobuf_mmap_setup(struct videobuf_queue *q, unsigned int bcount, unsigned int bsize, enum v4l2_memory memory); +int __videobuf_mmap_setup(struct videobuf_queue *q, + unsigned int bcount, unsigned int bsize, + enum v4l2_memory memory); int videobuf_mmap_free(struct videobuf_queue *q); int videobuf_mmap_mapper(struct videobuf_queue *q, struct vm_area_struct *vma); diff --git a/v4l/oss b/v4l/oss new file mode 120000 index 000000000..945c9b46d --- /dev/null +++ b/v4l/oss @@ -0,0 +1 @@ +.
\ No newline at end of file diff --git a/v4l2-apps/util/ivtv-ctl.c b/v4l2-apps/util/ivtv-ctl.c index 9d9808890..9d3170785 100644 --- a/v4l2-apps/util/ivtv-ctl.c +++ b/v4l2-apps/util/ivtv-ctl.c @@ -39,6 +39,7 @@ #include <linux/videodev2.h> #include <linux/dvb/video.h> +#include <linux/dvb/audio.h> /* copied from ivtv-driver.h */ #define IVTV_DBGFLG_WARN (1 << 0) @@ -84,11 +85,16 @@ enum Option { OptReset = 128, OptSetYuvMode, OptGetYuvMode, + OptSetAudioMute, + OptSetStereoMode, + OptSetBilingualMode, OptLast = 256 }; static char options[OptLast]; +static int app_result; + static struct option long_options[] = { /* Please keep in alphabetical order of the short option. That makes it easier to see which options are still free. */ @@ -104,6 +110,9 @@ static struct option long_options[] = { {"reset", required_argument, 0, OptReset}, {"get-yuv-mode", no_argument, 0, OptGetYuvMode}, {"set-yuv-mode", required_argument, 0, OptSetYuvMode}, + {"set-audio-mute", required_argument, 0, OptSetAudioMute}, + {"set-stereo-mode", required_argument, 0, OptSetStereoMode}, + {"set-bilingual-mode", required_argument, 0, OptSetBilingualMode}, {0, 0, 0, 0} }; @@ -121,6 +130,21 @@ static void usage(void) printf(" mode 1: interlaced (bottom transmitted first)\n"); printf(" mode 2: progressive\n"); printf(" mode 3: auto\n"); + printf(" --set-audio-mute <mute>\n"); + printf(" 0=enable audio during 1.5x and 0.5x playback\n"); + printf(" 1=mute audio during 1.5x and 0.5x playback\n"); + printf(" --set-stereo-mode <mode>\n"); + printf(" mode 0: playback stereo as stereo\n"); + printf(" mode 1: playback left stereo channel as mono\n"); + printf(" mode 2: playback right stereo channel as mono\n"); + printf(" mode 3: playback stereo as mono\n"); + printf(" mode 4: playback stereo as swapped stereo\n"); + printf(" --set-bilingual-mode <mode>\n"); + printf(" mode 0: playback bilingual as stereo\n"); + printf(" mode 1: playback left bilingual channel as mono\n"); + printf(" mode 2: playback right bilingual channel as mono\n"); + printf(" mode 3: playback bilingual as mono\n"); + printf(" mode 4: playback bilingual as swapped stereo\n"); printf(" --reset <mask> reset the infrared receiver (1) or digitizer (2) [VIDIOC_INT_RESET]\n"); printf("\n"); printf("Expert options:\n"); @@ -285,8 +309,10 @@ static int doioctl(int fd, int request, void *parm, const char *name) printf("ioctl %s ", name); retVal = ioctl(fd, request, parm); - if (retVal < 0) + if (retVal < 0) { + app_result = -1; printf("failed: %s\n", strerror(errno)); + } else printf("ok\n"); @@ -325,6 +351,9 @@ int main(int argc, char **argv) unsigned short gpio_dir = 0x0; /* GPIO direction bits */ int gpio_set_dir = 0; int passthrough = 0; + int audio_mute = 0; + int stereo_mode = 0; + int bilingual_mode = 0; int debug_level = 0; __u32 reset = 0; int new_debug_level, gdebug_level; @@ -427,6 +456,15 @@ int main(int argc, char **argv) case OptPassThrough: passthrough = strtol(optarg, 0L, 0); break; + case OptSetAudioMute: + audio_mute = strtol(optarg, 0L, 0); + break; + case OptSetStereoMode: + stereo_mode = strtol(optarg, 0L, 0); + break; + case OptSetBilingualMode: + bilingual_mode = strtol(optarg, 0L, 0); + break; case OptSetGPIO: subs = optarg; while (*subs != '\0') { @@ -588,6 +626,20 @@ int main(int argc, char **argv) "IVTV_IOC_PASSTHROUGH"); } + if (options[OptSetAudioMute]) { + doioctl(fd, AUDIO_SET_MUTE, (void *)audio_mute, "AUDIO_SET_MUTE"); + } + + if (options[OptSetStereoMode]) { + doioctl(fd, AUDIO_CHANNEL_SELECT, + (void *)stereo_mode, "AUDIO_CHANNEL_SELECT"); + } + + if (options[OptSetBilingualMode]) { + doioctl(fd, AUDIO_BILINGUAL_CHANNEL_SELECT, + (void *)bilingual_mode, "AUDIO_BILINGUAL_CHANNEL_SELECT"); + } + if (options[OptReset]) doioctl(fd, VIDIOC_INT_RESET, &reset, "VIDIOC_INT_RESET"); @@ -631,5 +683,5 @@ int main(int argc, char **argv) } close(fd); - exit(0); + exit(app_result); } diff --git a/v4l2-apps/util/v4l2-ctl.cpp b/v4l2-apps/util/v4l2-ctl.cpp index 198118ac6..d637e34d7 100644 --- a/v4l2-apps/util/v4l2-ctl.cpp +++ b/v4l2-apps/util/v4l2-ctl.cpp @@ -123,6 +123,8 @@ enum Option { static char options[OptLast]; +static int app_result; + static unsigned capabilities; typedef std::vector<struct v4l2_ext_control> ctrl_list; @@ -715,7 +717,7 @@ static void printcropcap(const struct v4l2_cropcap &cropcap) printf("\tPixel Aspect: %u/%u\n", cropcap.pixelaspect.numerator, cropcap.pixelaspect.denominator); } -static int printfmt(struct v4l2_format vfmt) +static void printfmt(struct v4l2_format vfmt) { const flag_def vbi_def[] = { { V4L2_VBI_UNSYNC, "unsynchronized" }, @@ -776,10 +778,7 @@ static int printfmt(struct v4l2_format vfmt) break; case V4L2_BUF_TYPE_PRIVATE: break; - default: - return -1; } - return 0; } static void print_video_formats(int fd, enum v4l2_buf_type type) @@ -999,10 +998,12 @@ static v4l2_std_id parse_ntsc(const char *ntsc) static int doioctl(int fd, int request, void *parm, const char *name) { - int retVal; + int retVal = ioctl(fd, request, parm); - if (!options[OptVerbose]) return ioctl(fd, request, parm); - retVal = ioctl(fd, request, parm); + if (retVal < 0) { + app_result = -1; + } + if (!options[OptVerbose]) return retVal; printf("%s: ", name); if (retVal < 0) printf("failed: %s\n", strerror(errno)); @@ -1068,9 +1069,7 @@ static void do_crop(int fd, unsigned int set_crop, struct v4l2_rect &vcrop, v4l2 struct v4l2_crop in_crop; in_crop.type = type; - if (ioctl(fd, VIDIOC_G_CROP, &in_crop) < 0) - fprintf(stderr, "ioctl: VIDIOC_G_CROP failed\n"); - else { + if (doioctl(fd, VIDIOC_G_CROP, &in_crop, "VIDIOC_G_CROP") == 0) { if (set_crop & CropWidth) in_crop.c.width = vcrop.width; if (set_crop & CropHeight) @@ -1079,8 +1078,7 @@ static void do_crop(int fd, unsigned int set_crop, struct v4l2_rect &vcrop, v4l2 in_crop.c.left = vcrop.left; if (set_crop & CropTop) in_crop.c.top = vcrop.top; - if (ioctl(fd, VIDIOC_S_CROP, &in_crop) < 0) - fprintf(stderr, "ioctl: VIDIOC_S_CROP failed\n"); + doioctl(fd, VIDIOC_S_CROP, &in_crop, "VIDIOC_S_CROP"); } } @@ -1603,43 +1601,35 @@ int main(int argc, char **argv) struct v4l2_tuner vt; memset(&vt, 0, sizeof(struct v4l2_tuner)); - if (ioctl(fd, VIDIOC_G_TUNER, &vt) < 0) { - fprintf(stderr, "ioctl: VIDIOC_G_TUNER failed\n"); - exit(1); + if (doioctl(fd, VIDIOC_G_TUNER, &vt, "VIDIOC_G_TUNER") == 0) { + vt.audmode = mode; + doioctl(fd, VIDIOC_S_TUNER, &vt, "VIDIOC_S_TUNER"); } - vt.audmode = mode; - doioctl(fd, VIDIOC_S_TUNER, &vt, "VIDIOC_S_TUNER"); } if (options[OptSetVideoFormat]) { struct v4l2_format in_vfmt; - printf("ioctl: VIDIOC_S_FMT\n"); + in_vfmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - if (ioctl(fd, VIDIOC_G_FMT, &in_vfmt) < 0) - fprintf(stderr, "ioctl: VIDIOC_G_FMT failed\n"); - else { + if (doioctl(fd, VIDIOC_G_FMT, &in_vfmt, "VIDIOC_G_FMT") == 0) { if (set_fmts & FmtWidth) in_vfmt.fmt.pix.width = vfmt.fmt.pix.width; if (set_fmts & FmtHeight) in_vfmt.fmt.pix.height = vfmt.fmt.pix.height; - if (ioctl(fd, VIDIOC_S_FMT, &in_vfmt) < 0) - fprintf(stderr, "ioctl: VIDIOC_S_FMT failed\n"); + doioctl(fd, VIDIOC_S_FMT, &in_vfmt, "VIDIOC_S_FMT"); } } if (options[OptSetVideoOutFormat]) { struct v4l2_format in_vfmt; - printf("ioctl: VIDIOC_S_FMT\n"); + in_vfmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT; - if (ioctl(fd, VIDIOC_G_FMT, &in_vfmt) < 0) - fprintf(stderr, "ioctl: VIDIOC_G_FMT failed\n"); - else { + if (doioctl(fd, VIDIOC_G_FMT, &in_vfmt, "VIDIOC_G_FMT") == 0) { if (set_fmts_out & FmtWidth) in_vfmt.fmt.pix.width = vfmt_out.fmt.pix.width; if (set_fmts_out & FmtHeight) in_vfmt.fmt.pix.height = vfmt_out.fmt.pix.height; - if (ioctl(fd, VIDIOC_S_FMT, &in_vfmt) < 0) - fprintf(stderr, "ioctl: VIDIOC_S_FMT failed\n"); + doioctl(fd, VIDIOC_S_FMT, &in_vfmt, "VIDIOC_S_FMT"); } } @@ -1669,29 +1659,24 @@ int main(int argc, char **argv) if (options[OptSetOutputOverlayFormat]) { struct v4l2_format fmt; - memset(&fmt, 0, sizeof(fmt)); + fmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY; - if (ioctl(fd, VIDIOC_G_FMT, &fmt, "VIDIOC_G_FMT") < 0) - fprintf(stderr, "ioctl: VIDIOC_G_FMT failed\n"); - else { + if (doioctl(fd, VIDIOC_G_FMT, &fmt, "VIDIOC_G_FMT") == 0) { if (set_overlay_fmt_out & FmtChromaKey) fmt.fmt.win.chromakey = overlay_fmt_out.fmt.win.chromakey; if (set_overlay_fmt_out & FmtGlobalAlpha) fmt.fmt.win.global_alpha = overlay_fmt_out.fmt.win.global_alpha; - if (ioctl(fd, VIDIOC_S_FMT, &fmt, "VIDIOC_S_FMT") < 0) - fprintf(stderr, "ioctl: VIDIOC_S_FMT failed\n"); + doioctl(fd, VIDIOC_S_FMT, &fmt, "VIDIOC_S_FMT"); } } if (options[OptSetFBuf]) { struct v4l2_framebuffer fb; - if (ioctl(fd, VIDIOC_G_FBUF, &fb, "VIDIOC_G_FBUF") < 0) - fprintf(stderr, "ioctl: VIDIOC_G_FBUF failed\n"); - else { + + if (doioctl(fd, VIDIOC_G_FBUF, &fb, "VIDIOC_G_FBUF") == 0) { fb.flags &= ~set_fbuf; fb.flags |= fbuf.flags; - if (ioctl(fd, VIDIOC_S_FBUF, &fb) < 0) - fprintf(stderr, "ioctl: VIDIOC_S_FBUF failed\n"); + doioctl(fd, VIDIOC_S_FBUF, &fb, "VIDIOC_S_FBUF"); } } @@ -1763,69 +1748,53 @@ int main(int argc, char **argv) if (options[OptGetVideoFormat]) { vfmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; if (doioctl(fd, VIDIOC_G_FMT, &vfmt, "VIDIOC_G_FMT") == 0) - if (printfmt(vfmt) != 0) - fprintf(stderr, "error printing result\n"); + printfmt(vfmt); } if (options[OptGetVideoOutFormat]) { vfmt_out.type = V4L2_BUF_TYPE_VIDEO_OUTPUT; if (doioctl(fd, VIDIOC_G_FMT, &vfmt_out, "VIDIOC_G_FMT") == 0) - if (printfmt(vfmt_out) != 0) - fprintf(stderr, "error printing result\n"); + printfmt(vfmt_out); } if (options[OptGetOverlayFormat]) { struct v4l2_format fmt; - memset(&fmt, 0, sizeof(fmt)); + fmt.type = V4L2_BUF_TYPE_VIDEO_OVERLAY; if (doioctl(fd, VIDIOC_G_FMT, &fmt, "VIDIOC_G_FMT") == 0) - if (printfmt(fmt) != 0) - fprintf(stderr, "error printing result\n"); + printfmt(fmt); } if (options[OptGetOutputOverlayFormat]) { struct v4l2_format fmt; - memset(&fmt, 0, sizeof(fmt)); + fmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY; if (doioctl(fd, VIDIOC_G_FMT, &fmt, "VIDIOC_G_FMT") == 0) - if (printfmt(fmt) != 0) - fprintf(stderr, "error printing result\n"); + printfmt(fmt); } if (options[OptGetSlicedVbiFormat]) { vbi_fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; - if (doioctl(fd, VIDIOC_G_FMT, &vbi_fmt, - "VIDIOC_G_FMT") == 0) - if (printfmt(vbi_fmt) != 0) - fprintf(stderr, - "error printing result\n"); + if (doioctl(fd, VIDIOC_G_FMT, &vbi_fmt, "VIDIOC_G_FMT") == 0) + printfmt(vbi_fmt); } if (options[OptGetSlicedVbiOutFormat]) { vbi_fmt_out.type = V4L2_BUF_TYPE_SLICED_VBI_OUTPUT; - if (doioctl(fd, VIDIOC_G_FMT, &vbi_fmt_out, - "VIDIOC_G_FMT") == 0) - if (printfmt(vbi_fmt_out) != 0) - fprintf(stderr, - "error printing result\n"); + if (doioctl(fd, VIDIOC_G_FMT, &vbi_fmt_out, "VIDIOC_G_FMT") == 0) + printfmt(vbi_fmt_out); } if (options[OptGetVbiFormat]) { raw_fmt.type = V4L2_BUF_TYPE_VBI_CAPTURE; - if (doioctl(fd, VIDIOC_G_FMT, &raw_fmt, - "VIDIOC_G_FMT") == 0) - if (printfmt(raw_fmt) != 0) - fprintf(stderr, - "error printing result\n"); + if (doioctl(fd, VIDIOC_G_FMT, &raw_fmt, "VIDIOC_G_FMT") == 0) + printfmt(raw_fmt); } if (options[OptGetVbiOutFormat]) { raw_fmt_out.type = V4L2_BUF_TYPE_VBI_OUTPUT; - if (doioctl(fd, VIDIOC_G_FMT, &raw_fmt_out, - "VIDIOC_G_FMT") == 0) - if (printfmt(raw_fmt_out) != 0) - fprintf(stderr, - "error printing result\n"); + if (doioctl(fd, VIDIOC_G_FMT, &raw_fmt_out, "VIDIOC_G_FMT") == 0) + printfmt(raw_fmt_out); } if (options[OptGetFBuf]) { @@ -2188,5 +2157,5 @@ int main(int argc, char **argv) } close(fd); - exit(0); + exit(app_result); } |