summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--linux/drivers/media/video/cx18/cx18-av-audio.c41
-rw-r--r--linux/drivers/media/video/cx18/cx18-av-core.c95
-rw-r--r--linux/drivers/media/video/cx18/cx18-av-core.h3
-rw-r--r--linux/drivers/media/video/cx18/cx18-av-firmware.c18
-rw-r--r--linux/drivers/media/video/cx18/cx18-firmware.c60
-rw-r--r--linux/drivers/media/video/cx18/cx18-gpio.c24
-rw-r--r--linux/drivers/media/video/cx18/cx18-i2c.c24
7 files changed, 185 insertions, 80 deletions
diff --git a/linux/drivers/media/video/cx18/cx18-av-audio.c b/linux/drivers/media/video/cx18/cx18-av-audio.c
index 0b5583788..486cad0c2 100644
--- a/linux/drivers/media/video/cx18/cx18-av-audio.c
+++ b/linux/drivers/media/video/cx18/cx18-av-audio.c
@@ -215,12 +215,15 @@ static int set_audclk_freq(struct cx18 *cx, u32 freq)
void cx18_av_audio_set_path(struct cx18 *cx)
{
struct cx18_av_state *state = &cx->av_state;
+ u8 v;
/* stop microcontroller */
- cx18_av_and_or(cx, 0x803, ~0x10, 0);
+ v = cx18_av_read(cx, 0x803) & ~0x10;
+ cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
/* assert soft reset */
- cx18_av_and_or(cx, 0x810, ~0x1, 0x01);
+ v = cx18_av_read(cx, 0x810) | 0x01;
+ cx18_av_write_expect(cx, 0x810, v, v, 0x0f);
/* Mute everything to prevent the PFFT! */
cx18_av_write(cx, 0x8d3, 0x1f);
@@ -240,12 +243,14 @@ void cx18_av_audio_set_path(struct cx18 *cx)
set_audclk_freq(cx, state->audclk_freq);
/* deassert soft reset */
- cx18_av_and_or(cx, 0x810, ~0x1, 0x00);
+ v = cx18_av_read(cx, 0x810) & ~0x01;
+ cx18_av_write_expect(cx, 0x810, v, v, 0x0f);
if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
/* When the microcontroller detects the
* audio format, it will unmute the lines */
- cx18_av_and_or(cx, 0x803, ~0x10, 0x10);
+ v = cx18_av_read(cx, 0x803) | 0x10;
+ cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
}
}
@@ -347,19 +352,23 @@ static int get_mute(struct cx18 *cx)
static void set_mute(struct cx18 *cx, int mute)
{
struct cx18_av_state *state = &cx->av_state;
+ u8 v;
if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
/* Must turn off microcontroller in order to mute sound.
* Not sure if this is the best method, but it does work.
* If the microcontroller is running, then it will undo any
* changes to the mute register. */
+ v = cx18_av_read(cx, 0x803);
if (mute) {
/* disable microcontroller */
- cx18_av_and_or(cx, 0x803, ~0x10, 0x00);
+ v &= ~0x10;
+ cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
cx18_av_write(cx, 0x8d3, 0x1f);
} else {
/* enable microcontroller */
- cx18_av_and_or(cx, 0x803, ~0x10, 0x10);
+ v |= 0x10;
+ cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
}
} else {
/* SRC1_MUTE_EN */
@@ -375,16 +384,26 @@ int cx18_av_audio(struct cx18 *cx, unsigned int cmd, void *arg)
switch (cmd) {
case VIDIOC_INT_AUDIO_CLOCK_FREQ:
+ {
+ u8 v;
if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
- cx18_av_and_or(cx, 0x803, ~0x10, 0);
+ v = cx18_av_read(cx, 0x803) & ~0x10;
+ cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
cx18_av_write(cx, 0x8d3, 0x1f);
}
- cx18_av_and_or(cx, 0x810, ~0x1, 1);
+ v = cx18_av_read(cx, 0x810) | 0x1;
+ cx18_av_write_expect(cx, 0x810, v, v, 0x0f);
+
retval = set_audclk_freq(cx, *(u32 *)arg);
- cx18_av_and_or(cx, 0x810, ~0x1, 0);
- if (state->aud_input > CX18_AV_AUDIO_SERIAL2)
- cx18_av_and_or(cx, 0x803, ~0x10, 0x10);
+
+ v = cx18_av_read(cx, 0x810) & ~0x1;
+ cx18_av_write_expect(cx, 0x810, v, v, 0x0f);
+ if (state->aud_input > CX18_AV_AUDIO_SERIAL2) {
+ v = cx18_av_read(cx, 0x803) | 0x10;
+ cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
+ }
return retval;
+ }
case VIDIOC_G_CTRL:
switch (ctrl->id) {
diff --git a/linux/drivers/media/video/cx18/cx18-av-core.c b/linux/drivers/media/video/cx18/cx18-av-core.c
index 73f5141a4..5c079e35e 100644
--- a/linux/drivers/media/video/cx18/cx18-av-core.c
+++ b/linux/drivers/media/video/cx18/cx18-av-core.c
@@ -36,12 +36,31 @@ int cx18_av_write(struct cx18 *cx, u16 addr, u8 value)
return 0;
}
+int cx18_av_write_expect(struct cx18 *cx, u16 addr, u8 value, u8 eval, u8 mask)
+{
+ u32 reg = 0xc40000 + (addr & ~3);
+ int shift = (addr & 3) * 8;
+ u32 x = cx18_read_reg(cx, reg);
+
+ x = (x & ~((u32)0xff << shift)) | ((u32)value << shift);
+ cx18_write_reg_expect(cx, x, reg,
+ ((u32)eval << shift), ((u32)mask << shift));
+ return 0;
+}
+
int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value)
{
cx18_write_reg(cx, value, 0xc40000 + addr);
return 0;
}
+int
+cx18_av_write4_expect(struct cx18 *cx, u16 addr, u32 value, u32 eval, u32 mask)
+{
+ cx18_write_reg_expect(cx, value, 0xc40000 + addr, eval, mask);
+ return 0;
+}
+
int cx18_av_write4_noretry(struct cx18 *cx, u16 addr, u32 value)
{
cx18_write_reg_noretry(cx, value, 0xc40000 + addr);
@@ -98,14 +117,16 @@ static void cx18_av_initialize(struct cx18 *cx)
cx18_av_loadfw(cx);
/* Stop 8051 code execution */
- cx18_av_write4(cx, CXADEC_DL_CTL, 0x03000000);
+ cx18_av_write4_expect(cx, CXADEC_DL_CTL, 0x03000000,
+ 0x03000000, 0x13000000);
/* initallize the PLL by toggling sleep bit */
v = cx18_av_read4(cx, CXADEC_HOST_REG1);
- /* enable sleep mode */
- cx18_av_write4(cx, CXADEC_HOST_REG1, v | 1);
+ /* enable sleep mode - register appears to be read only... */
+ cx18_av_write4_expect(cx, CXADEC_HOST_REG1, v | 1, v, 0xfffe);
/* disable sleep mode */
- cx18_av_write4(cx, CXADEC_HOST_REG1, v & 0xfffe);
+ cx18_av_write4_expect(cx, CXADEC_HOST_REG1, v & 0xfffe,
+ v & 0xfffe, 0xffff);
/* initialize DLLs */
v = cx18_av_read4(cx, CXADEC_DLL1_DIAG_CTRL) & 0xE1FFFEFF;
@@ -125,9 +146,10 @@ static void cx18_av_initialize(struct cx18 *cx)
v = cx18_av_read4(cx, CXADEC_AFE_DIAG_CTRL3) | 1;
/* enable TUNE_FIL_RST */
- cx18_av_write4(cx, CXADEC_AFE_DIAG_CTRL3, v);
+ cx18_av_write4_expect(cx, CXADEC_AFE_DIAG_CTRL3, v, v, 0x03009F0F);
/* disable TUNE_FIL_RST */
- cx18_av_write4(cx, CXADEC_AFE_DIAG_CTRL3, v & 0xFFFFFFFE);
+ cx18_av_write4_expect(cx, CXADEC_AFE_DIAG_CTRL3,
+ v & 0xFFFFFFFE, v & 0xFFFFFFFE, 0x03009F0F);
/* enable 656 output */
cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x040C00);
@@ -324,6 +346,7 @@ static void input_change(struct cx18 *cx)
{
struct cx18_av_state *state = &cx->av_state;
v4l2_std_id std = state->std;
+ u8 v;
/* Follow step 8c and 8d of section 3.16 in the cx18_av datasheet */
cx18_av_write(cx, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11);
@@ -333,31 +356,34 @@ static void input_change(struct cx18 *cx)
if (std & V4L2_STD_525_60) {
if (std == V4L2_STD_NTSC_M_JP) {
/* Japan uses EIAJ audio standard */
- cx18_av_write(cx, 0x808, 0xf7);
- cx18_av_write(cx, 0x80b, 0x02);
+ cx18_av_write_expect(cx, 0x808, 0xf7, 0xf7, 0xff);
+ cx18_av_write_expect(cx, 0x80b, 0x02, 0x02, 0x3f);
} else if (std == V4L2_STD_NTSC_M_KR) {
/* South Korea uses A2 audio standard */
- cx18_av_write(cx, 0x808, 0xf8);
- cx18_av_write(cx, 0x80b, 0x03);
+ cx18_av_write_expect(cx, 0x808, 0xf8, 0xf8, 0xff);
+ cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f);
} else {
/* Others use the BTSC audio standard */
- cx18_av_write(cx, 0x808, 0xf6);
- cx18_av_write(cx, 0x80b, 0x01);
+ cx18_av_write_expect(cx, 0x808, 0xf6, 0xf6, 0xff);
+ cx18_av_write_expect(cx, 0x80b, 0x01, 0x01, 0x3f);
}
} else if (std & V4L2_STD_PAL) {
/* Follow tuner change procedure for PAL */
- cx18_av_write(cx, 0x808, 0xff);
- cx18_av_write(cx, 0x80b, 0x03);
+ cx18_av_write_expect(cx, 0x808, 0xff, 0xff, 0xff);
+ cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f);
} else if (std & V4L2_STD_SECAM) {
/* Select autodetect for SECAM */
- cx18_av_write(cx, 0x808, 0xff);
- cx18_av_write(cx, 0x80b, 0x03);
+ cx18_av_write_expect(cx, 0x808, 0xff, 0xff, 0xff);
+ cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f);
}
- if (cx18_av_read(cx, 0x803) & 0x10) {
+ v = cx18_av_read(cx, 0x803);
+ if (v & 0x10) {
/* restart audio decoder microcontroller */
- cx18_av_and_or(cx, 0x803, ~0x10, 0x00);
- cx18_av_and_or(cx, 0x803, ~0x10, 0x10);
+ v &= ~0x10;
+ cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
+ v |= 0x10;
+ cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
}
}
@@ -368,6 +394,7 @@ static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input,
u8 is_composite = (vid_input >= CX18_AV_COMPOSITE1 &&
vid_input <= CX18_AV_COMPOSITE8);
u8 reg;
+ u8 v;
CX18_DEBUG_INFO("decoder set video input %d, audio input %d\n",
vid_input, aud_input);
@@ -413,16 +440,23 @@ static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input,
return -EINVAL;
}
- cx18_av_write(cx, 0x103, reg);
+ cx18_av_write_expect(cx, 0x103, reg, reg, 0xf7);
/* Set INPUT_MODE to Composite (0) or S-Video (1) */
cx18_av_and_or(cx, 0x401, ~0x6, is_composite ? 0 : 0x02);
+
/* Set CH_SEL_ADC2 to 1 if input comes from CH3 */
- cx18_av_and_or(cx, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0);
+ v = cx18_av_read(cx, 0x102);
+ if (reg & 0x80)
+ v &= ~0x2;
+ else
+ v |= 0x2;
/* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2 and CH3 */
if ((reg & 0xc0) != 0xc0 && (reg & 0x30) != 0x30)
- cx18_av_and_or(cx, 0x102, ~0x4, 4);
+ v |= 0x4;
else
- cx18_av_and_or(cx, 0x102, ~0x4, 0);
+ v &= ~0x4;
+ cx18_av_write_expect(cx, 0x102, v, v, 0x17);
+
/*cx18_av_and_or4(cx, 0x104, ~0x001b4180, 0x00004180);*/
state->vid_input = vid_input;
@@ -799,40 +833,47 @@ int cx18_av_cmd(struct cx18 *cx, unsigned int cmd, void *arg)
}
case VIDIOC_S_TUNER:
+ {
+ u8 v;
+
if (state->radio)
break;
+ v = cx18_av_read(cx, 0x809);
+ v &= ~0xf;
+
switch (vt->audmode) {
case V4L2_TUNER_MODE_MONO:
/* mono -> mono
stereo -> mono
bilingual -> lang1 */
- cx18_av_and_or(cx, 0x809, ~0xf, 0x00);
break;
case V4L2_TUNER_MODE_STEREO:
case V4L2_TUNER_MODE_LANG1:
/* mono -> mono
stereo -> stereo
bilingual -> lang1 */
- cx18_av_and_or(cx, 0x809, ~0xf, 0x04);
+ v |= 0x4;
break;
case V4L2_TUNER_MODE_LANG1_LANG2:
/* mono -> mono
stereo -> stereo
bilingual -> lang1/lang2 */
- cx18_av_and_or(cx, 0x809, ~0xf, 0x07);
+ v |= 0x7;
break;
case V4L2_TUNER_MODE_LANG2:
/* mono -> mono
stereo -> stereo
bilingual -> lang2 */
- cx18_av_and_or(cx, 0x809, ~0xf, 0x01);
+ v |= 0x1;
break;
default:
return -EINVAL;
}
+ cx18_av_write_expect(cx, 0x809, v, v, 0xff);
state->audmode = vt->audmode;
break;
+ }
case VIDIOC_G_FMT:
return get_v4lfmt(cx, (struct v4l2_format *)arg);
diff --git a/linux/drivers/media/video/cx18/cx18-av-core.h b/linux/drivers/media/video/cx18/cx18-av-core.h
index b67d8df20..a07988c6f 100644
--- a/linux/drivers/media/video/cx18/cx18-av-core.h
+++ b/linux/drivers/media/video/cx18/cx18-av-core.h
@@ -302,6 +302,9 @@ struct cx18_av_state {
int cx18_av_write(struct cx18 *cx, u16 addr, u8 value);
int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value);
int cx18_av_write4_noretry(struct cx18 *cx, u16 addr, u32 value);
+int cx18_av_write_expect(struct cx18 *cx, u16 addr, u8 value, u8 eval, u8 mask);
+int cx18_av_write4_expect(struct cx18 *cx, u16 addr, u32 value, u32 eval,
+ u32 mask);
u8 cx18_av_read(struct cx18 *cx, u16 addr);
u32 cx18_av_read4(struct cx18 *cx, u16 addr);
u32 cx18_av_read4_noretry(struct cx18 *cx, u16 addr);
diff --git a/linux/drivers/media/video/cx18/cx18-av-firmware.c b/linux/drivers/media/video/cx18/cx18-av-firmware.c
index 522a035b2..caa748a1a 100644
--- a/linux/drivers/media/video/cx18/cx18-av-firmware.c
+++ b/linux/drivers/media/video/cx18/cx18-av-firmware.c
@@ -43,11 +43,13 @@ int cx18_av_loadfw(struct cx18 *cx)
/* The firmware load often has byte errors, so allow for several
retries, both at byte level and at the firmware load level. */
while (retries1 < 5) {
- cx18_av_write4(cx, CXADEC_CHIP_CTRL, 0x00010000);
- cx18_av_write(cx, CXADEC_STD_DET_CTL, 0xf6);
+ cx18_av_write4_expect(cx, CXADEC_CHIP_CTRL, 0x00010000,
+ 0x00008430, 0xffffffff); /* cx25843 */
+ cx18_av_write_expect(cx, CXADEC_STD_DET_CTL, 0xf6, 0xf6, 0xff);
- /* Reset the Mako core (Register is undocumented.) */
- cx18_av_write4(cx, 0x8100, 0x00010000);
+ /* Reset the Mako core, Register is alias of CXADEC_CHIP_CTRL */
+ cx18_av_write4_expect(cx, 0x8100, 0x00010000,
+ 0x00008430, 0xffffffff); /* cx25843 */
/* Put the 8051 in reset and enable firmware upload */
cx18_av_write4_noretry(cx, CXADEC_DL_CTL, 0x0F000000);
@@ -93,7 +95,8 @@ int cx18_av_loadfw(struct cx18 *cx)
return -EIO;
}
- cx18_av_write4(cx, CXADEC_DL_CTL, 0x13000000 | fw->size);
+ cx18_av_write4_expect(cx, CXADEC_DL_CTL,
+ 0x13000000 | fw->size, 0x13000000, 0x13000000);
/* Output to the 416 */
cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x78000);
@@ -118,7 +121,8 @@ int cx18_av_loadfw(struct cx18 *cx)
passthrough */
cx18_av_write4(cx, CXADEC_PIN_CFG3, 0x5000B687);
- cx18_av_write4(cx, CXADEC_STD_DET_CTL, 0x000000F6);
+ cx18_av_write4_expect(cx, CXADEC_STD_DET_CTL, 0x000000F6, 0x000000F6,
+ 0x3F00FFFF);
/* CxDevWrReg(CXADEC_STD_DET_CTL, 0x000000FF); */
/* Set bit 0 in register 0x9CC to signify that this is MiniMe. */
@@ -136,7 +140,7 @@ int cx18_av_loadfw(struct cx18 *cx)
v |= 0xFF; /* Auto by default */
v |= 0x400; /* Stereo by default */
v |= 0x14000000;
- cx18_av_write4(cx, CXADEC_STD_DET_CTL, v);
+ cx18_av_write4_expect(cx, CXADEC_STD_DET_CTL, v, v, 0x3F00FFFF);
release_firmware(fw);
diff --git a/linux/drivers/media/video/cx18/cx18-firmware.c b/linux/drivers/media/video/cx18/cx18-firmware.c
index 51534428c..7a7c89032 100644
--- a/linux/drivers/media/video/cx18/cx18-firmware.c
+++ b/linux/drivers/media/video/cx18/cx18-firmware.c
@@ -200,8 +200,10 @@ static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx)
void cx18_halt_firmware(struct cx18 *cx)
{
CX18_DEBUG_INFO("Preparing for firmware halt.\n");
- cx18_write_reg(cx, 0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */
- cx18_write_reg(cx, 0x00020002, CX18_ADEC_CONTROL);
+ cx18_write_reg_expect(cx, 0x000F000F, CX18_PROC_SOFT_RESET,
+ 0x0000000F, 0x000F000F);
+ cx18_write_reg_expect(cx, 0x00020002, CX18_ADEC_CONTROL,
+ 0x00000002, 0x00020002);
}
void cx18_init_power(struct cx18 *cx, int lowpwr)
@@ -211,7 +213,8 @@ void cx18_init_power(struct cx18 *cx, int lowpwr)
cx18_write_reg(cx, 0x00000008, CX18_PLL_POWER_DOWN);
/* ADEC out of sleep */
- cx18_write_reg(cx, 0x00020000, CX18_ADEC_CONTROL);
+ cx18_write_reg_expect(cx, 0x00020000, CX18_ADEC_CONTROL,
+ 0x00000000, 0x00020002);
/* The fast clock is at 200/245 MHz */
cx18_write_reg(cx, lowpwr ? 0xD : 0x11, CX18_FAST_CLOCK_PLL_INT);
@@ -248,22 +251,34 @@ void cx18_init_power(struct cx18 *cx, int lowpwr)
/* VFC = disabled */
/* USB = disabled */
- cx18_write_reg(cx, lowpwr ? 0xFFFF0020 : 0x00060004,
- CX18_CLOCK_SELECT1);
- cx18_write_reg(cx, lowpwr ? 0xFFFF0004 : 0x00060006,
- CX18_CLOCK_SELECT2);
-
- cx18_write_reg(cx, 0xFFFF0002, CX18_HALF_CLOCK_SELECT1);
- cx18_write_reg(cx, 0xFFFF0104, CX18_HALF_CLOCK_SELECT2);
+ if (lowpwr) {
+ cx18_write_reg_expect(cx, 0xFFFF0020, CX18_CLOCK_SELECT1,
+ 0x00000020, 0xFFFFFFFF);
+ cx18_write_reg_expect(cx, 0xFFFF0004, CX18_CLOCK_SELECT2,
+ 0x00000004, 0xFFFFFFFF);
+ } else {
+ /* This doesn't explicitly set every clock select */
+ cx18_write_reg_expect(cx, 0x00060004, CX18_CLOCK_SELECT1,
+ 0x00000004, 0x00060006);
+ cx18_write_reg_expect(cx, 0x00060006, CX18_CLOCK_SELECT2,
+ 0x00000006, 0x00060006);
+ }
- cx18_write_reg(cx, 0xFFFF9026, CX18_CLOCK_ENABLE1);
- cx18_write_reg(cx, 0xFFFF3105, CX18_CLOCK_ENABLE2);
+ cx18_write_reg_expect(cx, 0xFFFF0002, CX18_HALF_CLOCK_SELECT1,
+ 0x00000002, 0xFFFFFFFF);
+ cx18_write_reg_expect(cx, 0xFFFF0104, CX18_HALF_CLOCK_SELECT2,
+ 0x00000104, 0xFFFFFFFF);
+ cx18_write_reg_expect(cx, 0xFFFF9026, CX18_CLOCK_ENABLE1,
+ 0x00009026, 0xFFFFFFFF);
+ cx18_write_reg_expect(cx, 0xFFFF3105, CX18_CLOCK_ENABLE2,
+ 0x00003105, 0xFFFFFFFF);
}
void cx18_init_memory(struct cx18 *cx)
{
cx18_msleep_timeout(10, 0);
- cx18_write_reg(cx, 0x10000, CX18_DDR_SOFT_RESET);
+ cx18_write_reg_expect(cx, 0x00010000, CX18_DDR_SOFT_RESET,
+ 0x00000000, 0x00010001);
cx18_msleep_timeout(10, 0);
cx18_write_reg(cx, cx->card->ddr.chip_config, CX18_DDR_CHIP_CONFIG);
@@ -282,13 +297,15 @@ void cx18_init_memory(struct cx18 *cx)
cx18_msleep_timeout(10, 0);
- cx18_write_reg(cx, 0x20000, CX18_DDR_SOFT_RESET);
+ cx18_write_reg_expect(cx, 0x00020000, CX18_DDR_SOFT_RESET,
+ 0x00000000, 0x00020002);
cx18_msleep_timeout(10, 0);
/* use power-down mode when idle */
cx18_write_reg(cx, 0x00000010, CX18_DDR_POWER_REG);
- cx18_write_reg(cx, 0x10001, CX18_REG_BUS_TIMEOUT_EN);
+ cx18_write_reg_expect(cx, 0x00010001, CX18_REG_BUS_TIMEOUT_EN,
+ 0x00000001, 0x00010001);
cx18_write_reg(cx, 0x48, CX18_DDR_MB_PER_ROW_7);
cx18_write_reg(cx, 0xE0000, CX18_DDR_BASE_63_ADDR);
@@ -310,7 +327,9 @@ int cx18_firmware_init(struct cx18 *cx)
/* Allow chip to control CLKRUN */
cx18_write_reg(cx, 0x5, CX18_DSP0_INTERRUPT_MASK);
- cx18_write_reg(cx, 0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */
+ /* Stop the firmware */
+ cx18_write_reg_expect(cx, 0x000F000F, CX18_PROC_SOFT_RESET,
+ 0x0000000F, 0x000F000F);
cx18_msleep_timeout(1, 0);
@@ -325,7 +344,8 @@ int cx18_firmware_init(struct cx18 *cx)
cx18_write_enc(cx, 0xE51FF004, 0);
cx18_write_enc(cx, 0xa00000, 4); /* todo: not hardcoded */
/* Start APU */
- cx18_write_reg(cx, 0x00010000, CX18_PROC_SOFT_RESET);
+ cx18_write_reg_expect(cx, 0x00010000, CX18_PROC_SOFT_RESET,
+ 0x00000000, 0x00010001);
cx18_msleep_timeout(500, 0);
sz = sz <= 0 ? sz : load_cpu_fw_direct("v4l-cx23418-cpu.fw",
@@ -335,7 +355,9 @@ int cx18_firmware_init(struct cx18 *cx)
int retries = 0;
/* start the CPU */
- cx18_write_reg(cx, 0x00080000, CX18_PROC_SOFT_RESET);
+ cx18_write_reg_expect(cx,
+ 0x00080000, CX18_PROC_SOFT_RESET,
+ 0x00000000, 0x00080008);
while (retries++ < 50) { /* Loop for max 500mS */
if ((cx18_read_reg(cx, CX18_PROC_SOFT_RESET)
& 1) == 0)
@@ -352,6 +374,6 @@ int cx18_firmware_init(struct cx18 *cx)
return -EIO;
}
/* initialize GPIO */
- cx18_write_reg(cx, 0x14001400, 0xC78110);
+ cx18_write_reg_expect(cx, 0x14001400, 0xc78110, 0x00001400, 0x14001400);
return 0;
}
diff --git a/linux/drivers/media/video/cx18/cx18-gpio.c b/linux/drivers/media/video/cx18/cx18-gpio.c
index 0e5604219..17b7a32fc 100644
--- a/linux/drivers/media/video/cx18/cx18-gpio.c
+++ b/linux/drivers/media/video/cx18/cx18-gpio.c
@@ -47,15 +47,21 @@
static void gpio_write(struct cx18 *cx)
{
- u32 dir = cx->gpio_dir;
- u32 val = cx->gpio_val;
-
- cx18_write_reg(cx, (dir & 0xffff) << 16, CX18_REG_GPIO_DIR1);
- cx18_write_reg(cx, ((dir & 0xffff) << 16) | (val & 0xffff),
- CX18_REG_GPIO_OUT1);
- cx18_write_reg(cx, dir & 0xffff0000, CX18_REG_GPIO_DIR2);
- cx18_write_reg_sync(cx, (dir & 0xffff0000) | ((val & 0xffff0000) >> 16),
- CX18_REG_GPIO_OUT2);
+ u32 dir_lo = cx->gpio_dir & 0xffff;
+ u32 val_lo = cx->gpio_val & 0xffff;
+ u32 dir_hi = cx->gpio_dir >> 16;
+ u32 val_hi = cx->gpio_val >> 16;
+
+ cx18_write_reg_expect(cx, dir_lo << 16,
+ CX18_REG_GPIO_DIR1, ~dir_lo, dir_lo);
+ cx18_write_reg_expect(cx, (dir_lo << 16) | val_lo,
+ CX18_REG_GPIO_OUT1, val_lo, dir_lo);
+ cx18_write_reg_expect(cx, dir_hi << 16,
+ CX18_REG_GPIO_DIR2, ~dir_hi, dir_hi);
+ cx18_write_reg_expect(cx, (dir_hi << 16) | val_hi,
+ CX18_REG_GPIO_OUT2, val_hi, dir_hi);
+ if (!cx18_retry_mmio)
+ (void) cx18_read_reg(cx, CX18_REG_GPIO_OUT2); /* sync */
}
void cx18_reset_i2c_slaves_gpio(struct cx18 *cx)
diff --git a/linux/drivers/media/video/cx18/cx18-i2c.c b/linux/drivers/media/video/cx18/cx18-i2c.c
index f28a1ff2e..1af9ea149 100644
--- a/linux/drivers/media/video/cx18/cx18-i2c.c
+++ b/linux/drivers/media/video/cx18/cx18-i2c.c
@@ -27,6 +27,7 @@
#include "cx18-gpio.h"
#include "cx18-av-core.h"
#include "cx18-i2c.h"
+#include "cx18-irq.h"
#define CX18_REG_I2C_1_WR 0xf15000
#define CX18_REG_I2C_1_RD 0xf15008
@@ -424,22 +425,31 @@ int init_cx18_i2c(struct cx18 *cx)
if (cx18_read_reg(cx, CX18_REG_I2C_2_WR) != 0x0003c02f) {
/* Reset/Unreset I2C hardware block */
/* Clock select 220MHz */
- cx18_write_reg(cx, 0x10000000, 0xc71004);
+ cx18_write_reg_expect(cx, 0x10000000, 0xc71004,
+ 0x00000000, 0x10001000);
/* Clock Enable */
- cx18_write_reg_sync(cx, 0x10001000, 0xc71024);
+ cx18_write_reg_expect(cx, 0x10001000, 0xc71024,
+ 0x00001000, 0x10001000);
}
/* courtesy of Steven Toth <stoth@hauppauge.com> */
- cx18_write_reg_sync(cx, 0x00c00000, 0xc7001c);
+ cx18_write_reg_expect(cx, 0x00c00000, 0xc7001c, 0x00000000, 0x00c000c0);
+ if (!cx18_retry_mmio)
+ (void) cx18_read_reg(cx, 0xc7001c); /* sync */
mdelay(10);
- cx18_write_reg_sync(cx, 0x00c000c0, 0xc7001c);
+ cx18_write_reg_expect(cx, 0x00c000c0, 0xc7001c, 0x000000c0, 0x00c000c0);
+ if (!cx18_retry_mmio)
+ (void) cx18_read_reg(cx, 0xc7001c); /* sync */
mdelay(10);
- cx18_write_reg_sync(cx, 0x00c00000, 0xc7001c);
+ cx18_write_reg_expect(cx, 0x00c00000, 0xc7001c, 0x00000000, 0x00c000c0);
+ if (!cx18_retry_mmio)
+ (void) cx18_read_reg(cx, 0xc7001c); /* sync */
mdelay(10);
/* Set to edge-triggered intrs. */
- cx18_write_reg_sync(cx, 0x00c00000, 0xc730c8);
+ cx18_write_reg(cx, 0x00c00000, 0xc730c8);
/* Clear any stale intrs */
- cx18_write_reg_sync(cx, 0x00c00000, 0xc730c4);
+ cx18_write_reg_expect(cx, HW2_I2C1_INT|HW2_I2C2_INT, HW2_INT_CLR_STATUS,
+ ~(HW2_I2C1_INT|HW2_I2C2_INT), HW2_I2C1_INT|HW2_I2C2_INT);
/* Hw I2C1 Clock Freq ~100kHz */
cx18_write_reg_sync(cx, 0x00021c0f & ~4, CX18_REG_I2C_1_WR);
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-02 21:07:15 +0000