diff options
22 files changed, 797 insertions, 128 deletions
@@ -2,7 +2,7 @@ Mauro Carvalho Chehab 2006 Apr 26 V4L/DVB building procedures are based at the use of Makefile rules. Those rules are close tho the ones at Linux Kernel, to allow an easier -usage. +usage. ======================================================================= Quick building procedure is: @@ -25,7 +25,7 @@ distclean - Cleans compiled files from the tree, version. default - Continues building the latest module selection - This is the behavior when just typed: + This is the behavior when just typed: make install - Installs all modules at kernel's default dir @@ -54,11 +54,11 @@ menuconfig - Generate a ncurses menu. Requires full kernel source, since it depends on kernel's mconf and lxconfig stripts; -release - Allows changing kernel version. +release - Allows changing kernel version. Typical usage is: make release VER=2.6.12-18mdk (to force compiling to 2.6.12-18mdk) - (This will work only if + (This will work only if /lib/modules/2.6.12-18mdk/build/ points to that kernel version) Or diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig index 3bc6722a6..db00acd83 100644 --- a/linux/drivers/media/dvb/dvb-usb/Kconfig +++ b/linux/drivers/media/dvb/dvb-usb/Kconfig @@ -25,6 +25,7 @@ config DVB_USB_A800 tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" depends on DVB_USB select DVB_DIB3000MC + select DVB_TUNER_MT2060 help Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. @@ -32,6 +33,7 @@ config DVB_USB_DIBUSB_MB tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)" depends on DVB_USB select DVB_DIB3000MB + select DVB_TUNER_MT2060 help Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator. @@ -64,6 +66,7 @@ config DVB_USB_DIBUSB_MC tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" depends on DVB_USB select DVB_DIB3000MC + select DVB_TUNER_MT2060 help Support for 2.0 DVB-T receivers based on reference designs made by DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator. @@ -79,6 +82,7 @@ config DVB_USB_UMT_010 tristate "HanfTek UMT-010 DVB-T USB2.0 support" depends on DVB_USB select DVB_DIB3000MC + select DVB_TUNER_MT2060 help Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. @@ -144,6 +148,7 @@ config DVB_USB_NOVA_T_USB2 tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" depends on DVB_USB select DVB_DIB3000MC + select DVB_TUNER_MT2060 help Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. diff --git a/linux/drivers/media/dvb/dvb-usb/dibusb-common.c b/linux/drivers/media/dvb/dvb-usb/dibusb-common.c index abd75b4a3..9b4e33090 100644 --- a/linux/drivers/media/dvb/dvb-usb/dibusb-common.c +++ b/linux/drivers/media/dvb/dvb-usb/dibusb-common.c @@ -168,11 +168,62 @@ int dibusb_read_eeprom_byte(struct dvb_usb_device *d, u8 offs, u8 *val) } EXPORT_SYMBOL(dibusb_read_eeprom_byte); +static struct mt2060_config stk3000p_mt2060_config = { + .i2c_address = 0x60, +}; + +static int dibusb_tuner_init(struct dvb_frontend *fe) +{ + struct dvb_usb_device *d = fe->dvb->priv; + struct dibusb_state *st = d->priv; + + if (d->tuner_pass_ctrl && st->mt2060_present) { + int ret; + d->tuner_pass_ctrl(d->fe, 1, stk3000p_mt2060_config.i2c_address); + ret = mt2060_init(&st->mt2060); + d->tuner_pass_ctrl(d->fe, 0, 0); + return ret; + } + return dvb_usb_pll_init_i2c(fe); +} + +static int dibusb_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep) +{ + struct dvb_usb_device *d = fe->dvb->priv; + struct dibusb_state *st = d->priv; + + if (d->tuner_pass_ctrl && st->mt2060_present) { + int ret; + d->tuner_pass_ctrl(d->fe, 1, stk3000p_mt2060_config.i2c_address); + ret = mt2060_set(&st->mt2060,fep); + d->tuner_pass_ctrl(d->fe,0,0); + return ret; + } + return dvb_usb_pll_set_i2c(fe,fep); +} + +static const struct dib3000p_agc_config dib3000p_agc_panasonic_env57h1xd5 = { + { 0x51, 0x301d, 0x0, 0x1cc7, 0xdc29, 0x570a, + 0xbae1, 0x8ccd, 0x3b6d, 0x551d, 0xa, 0x951e } +}; + +static const struct dib3000p_agc_config dib3000p_agc_microtune_mt2060 = { + { 0x196, 0x301d, 0x0, 0x1cc7, 0xffff, 0x5c29, + 0xa8f6, 0x5eb8, 0x65ff, 0x40ff, 0x8a, 0x1114 } +}; + int dibusb_dib3000mc_frontend_attach(struct dvb_usb_device *d) { struct dib3000_config demod_cfg; struct dibusb_state *st = d->priv; +<<<<<<< /home/users/pboettcher/devel/v4l-dvb.stk3000p/linux/drivers/media/dvb/dvb-usb/dibusb-common.c + demod_cfg.agc = &dib3000p_agc_panasonic_env57h1xd5; + demod_cfg.pll_set = dibusb_tuner_set; + demod_cfg.pll_init = dibusb_tuner_init; + +======= +>>>>>>> /tmp/dibusb-common.c~other.VjLUsN for (demod_cfg.demod_address = 0x8; demod_cfg.demod_address < 0xd; demod_cfg.demod_address++) if ((d->fe = dib3000mc_attach(&demod_cfg,&d->i2c_adap,&st->ops)) != NULL) { d->fe->ops.tuner_ops.init = dvb_usb_tuner_init_i2c; @@ -187,12 +238,51 @@ EXPORT_SYMBOL(dibusb_dib3000mc_frontend_attach); int dibusb_dib3000mc_tuner_attach (struct dvb_usb_device *d) { +<<<<<<< /home/users/pboettcher/devel/v4l-dvb.stk3000p/linux/drivers/media/dvb/dvb-usb/dibusb-common.c + int ret; + u8 a,b; + u16 if1 = 1220; + + if (d->tuner_pass_ctrl) { + struct dibusb_state *st = d->priv; + d->tuner_pass_ctrl(d->fe, 1, stk3000p_mt2060_config.i2c_address); + // First IF calibration for Liteon Sticks + if (d->udev->descriptor.idVendor == USB_VID_LITEON && + d->udev->descriptor.idProduct == USB_PID_LITEON_DVB_T_WARM) { + + dibusb_read_eeprom_byte(d,0x7E,&a); + dibusb_read_eeprom_byte(d,0x7F,&b); + + if (a == 0xFF && b == 0xFF) + if1 = 1220; + else if (a == 0x00) + if1 = 1220+b; + else if (a == 0x80) + if1 = 1220-b; + else { + warn("LITE-ON DVB-T Tuner : Strange IF1 calibration :%2X %2X\n",(int)a,(int)b); + if1 = 1220; + } + } + if ((ret = mt2060_attach(&st->mt2060,&stk3000p_mt2060_config, &d->i2c_adap,if1)) != 0) { + /* not found - use panasonic pll parameters */ + d->pll_addr = 0x60; + d->pll_desc = &dvb_pll_env57h1xd5; + } else { + st->mt2060_present = 1; + /* set the correct agc parameters for the dib3000p */ + dib3000mc_set_agc_config(d->fe, &dib3000p_agc_microtune_mt2060); + } + d->tuner_pass_ctrl(d->fe,0,0); + } +======= d->pll_addr = 0x60; d->pll_desc = &dvb_pll_env57h1xd5; d->fe->ops.tuner_ops.init = dvb_usb_tuner_init_i2c; d->fe->ops.tuner_ops.set_params = dvb_usb_tuner_set_params_i2c; +>>>>>>> /tmp/dibusb-common.c~other.VjLUsN return 0; } EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach); @@ -267,6 +357,67 @@ struct dvb_usb_rc_key dibusb_rc_keys[] = { { 0x86, 0x1e, KEY_DOWN }, { 0x86, 0x1f, KEY_LEFT }, { 0x86, 0x1b, KEY_RIGHT }, + + /* Key codes for the DiBcom MOD3000 remote. */ + { 0x80, 0x00, KEY_MUTE }, + { 0x80, 0x01, KEY_TEXT }, + { 0x80, 0x02, KEY_HOME }, + { 0x80, 0x03, KEY_POWER }, + + { 0x80, 0x04, KEY_RED }, + { 0x80, 0x05, KEY_GREEN }, + { 0x80, 0x06, KEY_YELLOW }, + { 0x80, 0x07, KEY_BLUE }, + + { 0x80, 0x08, KEY_DVD }, + { 0x80, 0x09, KEY_AUDIO }, + { 0x80, 0x0a, KEY_MEDIA }, /* Pictures */ + { 0x80, 0x0b, KEY_VIDEO }, + + { 0x80, 0x0c, KEY_BACK }, + { 0x80, 0x0d, KEY_UP }, + { 0x80, 0x0e, KEY_RADIO }, + { 0x80, 0x0f, KEY_EPG }, + + { 0x80, 0x10, KEY_LEFT }, + { 0x80, 0x11, KEY_OK }, + { 0x80, 0x12, KEY_RIGHT }, + { 0x80, 0x13, KEY_UNKNOWN }, /* SAP */ + + { 0x80, 0x14, KEY_TV }, + { 0x80, 0x15, KEY_DOWN }, + { 0x80, 0x16, KEY_MENU }, /* DVD Menu */ + { 0x80, 0x17, KEY_LAST }, + + { 0x80, 0x18, KEY_RECORD }, + { 0x80, 0x19, KEY_STOP }, + { 0x80, 0x1a, KEY_PAUSE }, + { 0x80, 0x1b, KEY_PLAY }, + + { 0x80, 0x1c, KEY_PREVIOUS }, + { 0x80, 0x1d, KEY_REWIND }, + { 0x80, 0x1e, KEY_FASTFORWARD }, + { 0x80, 0x1f, KEY_NEXT}, + + { 0x80, 0x40, KEY_1 }, + { 0x80, 0x41, KEY_2 }, + { 0x80, 0x42, KEY_3 }, + { 0x80, 0x43, KEY_CHANNELUP }, + + { 0x80, 0x44, KEY_4 }, + { 0x80, 0x45, KEY_5 }, + { 0x80, 0x46, KEY_6 }, + { 0x80, 0x47, KEY_CHANNELDOWN }, + + { 0x80, 0x48, KEY_7 }, + { 0x80, 0x49, KEY_8 }, + { 0x80, 0x4a, KEY_9 }, + { 0x80, 0x4b, KEY_VOLUMEUP }, + + { 0x80, 0x4c, KEY_CLEAR }, + { 0x80, 0x4d, KEY_0 }, + { 0x80, 0x4e, KEY_ENTER }, + { 0x80, 0x4f, KEY_VOLUMEDOWN }, }; EXPORT_SYMBOL(dibusb_rc_keys); diff --git a/linux/drivers/media/dvb/dvb-usb/dibusb-mb.c b/linux/drivers/media/dvb/dvb-usb/dibusb-mb.c index 78acd6540..b4efa3772 100644 --- a/linux/drivers/media/dvb/dvb-usb/dibusb-mb.c +++ b/linux/drivers/media/dvb/dvb-usb/dibusb-mb.c @@ -169,7 +169,7 @@ static struct dvb_usb_properties dibusb1_1_properties = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dibusb_rc_keys, - .rc_key_map_size = 63, /* wow, that is ugly ... I want to load it to the driver dynamically */ + .rc_key_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ .rc_query = dibusb_rc_query, .i2c_algo = &dibusb_i2c_algo, @@ -247,7 +247,7 @@ static struct dvb_usb_properties dibusb1_1_an2235_properties = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dibusb_rc_keys, - .rc_key_map_size = 63, /* wow, that is ugly ... I want to load it to the driver dynamically */ + .rc_key_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ .rc_query = dibusb_rc_query, .i2c_algo = &dibusb_i2c_algo, @@ -304,7 +304,7 @@ static struct dvb_usb_properties dibusb2_0b_properties = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dibusb_rc_keys, - .rc_key_map_size = 63, /* wow, that is ugly ... I want to load it to the driver dynamically */ + .rc_key_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ .rc_query = dibusb_rc_query, .i2c_algo = &dibusb_i2c_algo, @@ -355,7 +355,7 @@ static struct dvb_usb_properties artec_t1_usb2_properties = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dibusb_rc_keys, - .rc_key_map_size = 63, /* wow, that is ugly ... I want to load it to the driver dynamically */ + .rc_key_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ .rc_query = dibusb_rc_query, .i2c_algo = &dibusb_i2c_algo, diff --git a/linux/drivers/media/dvb/dvb-usb/dibusb-mc.c b/linux/drivers/media/dvb/dvb-usb/dibusb-mc.c index 87fc1de1f..4c208baad 100644 --- a/linux/drivers/media/dvb/dvb-usb/dibusb-mc.c +++ b/linux/drivers/media/dvb/dvb-usb/dibusb-mc.c @@ -28,6 +28,17 @@ static struct usb_device_id dibusb_dib3000mc_table [] = { /* 00 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3001_COLD) }, /* 01 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3001_WARM) }, /* 02 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_COLD) }, +/* 03 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_WARM) }, // ( ? ) +/* 04 */ { USB_DEVICE(USB_VID_LITEON, USB_PID_LITEON_DVB_T_COLD) }, +/* 05 */ { USB_DEVICE(USB_VID_LITEON, USB_PID_LITEON_DVB_T_WARM) }, +/* 06 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_DIGIVOX_MINI_SL_COLD) }, +/* 07 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_DIGIVOX_MINI_SL_WARM) }, +/* 08 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB2_COLD) }, +/* 09 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB2_WARM) }, +/* 10 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14_COLD) }, +/* 11 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14_WARM) }, +/* 12 */ { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_COLD) }, +/* 13 */ { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_WARM) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, dibusb_dib3000mc_table); @@ -50,7 +61,7 @@ static struct dvb_usb_properties dibusb_mc_properties = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dibusb_rc_keys, - .rc_key_map_size = 63, /* FIXME */ + .rc_key_map_size = 111, /* FIXME */ .rc_query = dibusb_rc_query, .i2c_algo = &dibusb_i2c_algo, @@ -68,16 +79,38 @@ static struct dvb_usb_properties dibusb_mc_properties = { } }, - .num_device_descs = 2, + .num_device_descs = 7, .devices = { { "DiBcom USB2.0 DVB-T reference design (MOD3000P)", { &dibusb_dib3000mc_table[0], NULL }, { &dibusb_dib3000mc_table[1], NULL }, }, - { "Artec T1 USB2.0 TVBOX (please report the warm ID)", + { "Artec T1 USB2.0 TVBOX (please check the warm ID)", { &dibusb_dib3000mc_table[2], NULL }, - { NULL }, + { &dibusb_dib3000mc_table[3], NULL }, }, + { "LITE-ON USB2.0 DVB-T Tuner", + /* Also rebranded as Intuix S800, Toshiba */ + { &dibusb_dib3000mc_table[4], NULL }, + { &dibusb_dib3000mc_table[5], NULL }, + }, + { "MSI Digivox Mini SL", + { &dibusb_dib3000mc_table[6], NULL }, + { &dibusb_dib3000mc_table[7], NULL }, + }, + { "GRAND - USB2.0 DVB-T adapter", + { &dibusb_dib3000mc_table[8], NULL }, + { &dibusb_dib3000mc_table[9], NULL }, + }, + { "Artec T14 - USB2.0 DVB-T", + { &dibusb_dib3000mc_table[10], NULL }, + { &dibusb_dib3000mc_table[11], NULL }, + }, + { "Leadtek - USB2.0 Winfast DTV dongle", + { &dibusb_dib3000mc_table[12], NULL }, + { &dibusb_dib3000mc_table[13], NULL }, + }, + { NULL }, } }; diff --git a/linux/drivers/media/dvb/dvb-usb/dibusb.h b/linux/drivers/media/dvb/dvb-usb/dibusb.h index 2d99d05c7..7fd57d053 100644 --- a/linux/drivers/media/dvb/dvb-usb/dibusb.h +++ b/linux/drivers/media/dvb/dvb-usb/dibusb.h @@ -17,6 +17,7 @@ #include "dvb-usb.h" #include "dib3000.h" +#include "mt2060.h" /* * protocol of all dibusb related devices @@ -96,6 +97,8 @@ struct dibusb_state { struct dib_fe_xfer_ops ops; + struct mt2060_state mt2060; + int mt2060_present; /* for RC5 remote control */ int old_toggle; diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 95698918b..d690320ff 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -10,51 +10,53 @@ #define _DVB_USB_IDS_H_ /* Vendor IDs */ -#define USB_VID_ADSTECH 0x06e1 -#define USB_VID_ANCHOR 0x0547 -#define USB_VID_WIDEVIEW 0x14aa -#define USB_VID_AVERMEDIA 0x07ca -#define USB_VID_COMPRO 0x185b -#define USB_VID_COMPRO_UNK 0x145f -#define USB_VID_CYPRESS 0x04b4 -#define USB_VID_DIBCOM 0x10b8 -#define USB_VID_DVICO 0x0fe9 -#define USB_VID_EMPIA 0xeb1a -#define USB_VID_GRANDTEC 0x5032 -#define USB_VID_HANFTEK 0x15f4 -#define USB_VID_HAUPPAUGE 0x2040 -#define USB_VID_HYPER_PALTEK 0x1025 -#define USB_VID_KWORLD 0xeb2a -#define USB_VID_KYE 0x0458 -#define USB_VID_MEDION 0x1660 -#define USB_VID_PINNACLE 0x2304 -#define USB_VID_VISIONPLUS 0x13d3 -#define USB_VID_TWINHAN 0x1822 -#define USB_VID_ULTIMA_ELECTRONIC 0x05d8 -#define USB_VID_GENPIX 0x09c0 +#define USB_VID_ADSTECH 0x06e1 +#define USB_VID_ANCHOR 0x0547 +#define USB_VID_AVERMEDIA 0x07ca +#define USB_VID_COMPRO 0x185b +#define USB_VID_COMPRO_UNK 0x145f +#define USB_VID_CYPRESS 0x04b4 +#define USB_VID_DIBCOM 0x10b8 +#define USB_VID_DVICO 0x0fe9 +#define USB_VID_EMPIA 0xeb1a +#define USB_VID_GENPIX 0x09c0 +#define USB_VID_GRANDTEC 0x5032 +#define USB_VID_HANFTEK 0x15f4 +#define USB_VID_HAUPPAUGE 0x2040 +#define USB_VID_HYPER_PALTEK 0x1025 +#define USB_VID_KWORLD 0xeb2a +#define USB_VID_KYE 0x0458 +#define USB_VID_LEADTEK 0x0413 +#define USB_VID_LITEON 0x04ca +#define USB_VID_MEDION 0x1660 +#define USB_VID_PINNACLE 0x2304 +#define USB_VID_VISIONPLUS 0x13d3 +#define USB_VID_TWINHAN 0x1822 +#define USB_VID_ULTIMA_ELECTRONIC 0x05d8 +#define USB_VID_WIDEVIEW 0x14aa /* Product IDs */ #define USB_PID_ADSTECH_USB2_COLD 0xa333 #define USB_PID_ADSTECH_USB2_WARM 0xa334 -#define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 -#define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 -#define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 -#define USB_PID_AVERMEDIA_DVBT_USB2_WARM 0xa801 -#define USB_PID_COMPRO_DVBU2000_COLD 0xd000 -#define USB_PID_COMPRO_DVBU2000_WARM 0xd001 -#define USB_PID_COMPRO_DVBU2000_UNK_COLD 0x010c -#define USB_PID_COMPRO_DVBU2000_UNK_WARM 0x010d +#define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 +#define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 +#define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 +#define USB_PID_AVERMEDIA_DVBT_USB2_WARM 0xa801 +#define USB_PID_COMPRO_DVBU2000_COLD 0xd000 +#define USB_PID_COMPRO_DVBU2000_WARM 0xd001 +#define USB_PID_COMPRO_DVBU2000_UNK_COLD 0x010c +#define USB_PID_COMPRO_DVBU2000_UNK_WARM 0x010d #define USB_PID_DIBCOM_HOOK_DEFAULT 0x0064 -#define USB_PID_DIBCOM_HOOK_DEFAULT_REENUM 0x0065 +#define USB_PID_DIBCOM_HOOK_DEFAULT_REENUM 0x0065 #define USB_PID_DIBCOM_MOD3000_COLD 0x0bb8 #define USB_PID_DIBCOM_MOD3000_WARM 0x0bb9 #define USB_PID_DIBCOM_MOD3001_COLD 0x0bc6 #define USB_PID_DIBCOM_MOD3001_WARM 0x0bc7 #define USB_PID_DIBCOM_STK7700 0x1e14 -#define USB_PID_DIBCOM_STK7700_REENUM 0x1e15 -#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131 -#define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0 -#define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1 +#define USB_PID_DIBCOM_STK7700_REENUM 0x1e15 +#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131 +#define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0 +#define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1 #define USB_PID_KWORLD_VSTREAM_COLD 0x17de #define USB_PID_KWORLD_VSTREAM_WARM 0x17df #define USB_PID_TWINHAN_VP7041_COLD 0x3201 @@ -69,25 +71,27 @@ #define USB_PID_DNTV_TINYUSB2_WARM 0x3224 #define USB_PID_ULTIMA_TVBOX_COLD 0x8105 #define USB_PID_ULTIMA_TVBOX_WARM 0x8106 -#define USB_PID_ULTIMA_TVBOX_AN2235_COLD 0x8107 -#define USB_PID_ULTIMA_TVBOX_AN2235_WARM 0x8108 -#define USB_PID_ULTIMA_TVBOX_ANCHOR_COLD 0x2235 -#define USB_PID_ULTIMA_TVBOX_USB2_COLD 0x8109 -#define USB_PID_ULTIMA_TVBOX_USB2_WARM 0x810a -#define USB_PID_ULTIMA_TVBOX_USB2_FX_COLD 0x8613 -#define USB_PID_ULTIMA_TVBOX_USB2_FX_WARM 0x1002 -#define USB_PID_UNK_HYPER_PALTEK_COLD 0x005e -#define USB_PID_UNK_HYPER_PALTEK_WARM 0x005f -#define USB_PID_HANFTEK_UMT_010_COLD 0x0001 -#define USB_PID_HANFTEK_UMT_010_WARM 0x0015 +#define USB_PID_ULTIMA_TVBOX_AN2235_COLD 0x8107 +#define USB_PID_ULTIMA_TVBOX_AN2235_WARM 0x8108 +#define USB_PID_ULTIMA_TVBOX_ANCHOR_COLD 0x2235 +#define USB_PID_ULTIMA_TVBOX_USB2_COLD 0x8109 +#define USB_PID_ULTIMA_TVBOX_USB2_WARM 0x810a +#define USB_PID_ARTEC_T14_COLD 0x810b +#define USB_PID_ARTEC_T14_WARM 0x810c +#define USB_PID_ULTIMA_TVBOX_USB2_FX_COLD 0x8613 +#define USB_PID_ULTIMA_TVBOX_USB2_FX_WARM 0x1002 +#define USB_PID_UNK_HYPER_PALTEK_COLD 0x005e +#define USB_PID_UNK_HYPER_PALTEK_WARM 0x005f +#define USB_PID_HANFTEK_UMT_010_COLD 0x0001 +#define USB_PID_HANFTEK_UMT_010_WARM 0x0015 #define USB_PID_DTT200U_COLD 0x0201 #define USB_PID_DTT200U_WARM 0x0301 -#define USB_PID_WT220U_COLD 0x0222 -#define USB_PID_WT220U_WARM 0x0221 +#define USB_PID_WT220U_COLD 0x0222 +#define USB_PID_WT220U_WARM 0x0221 #define USB_PID_WT220U_ZL0353_COLD 0x022a #define USB_PID_WT220U_ZL0353_WARM 0x022b -#define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300 -#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301 +#define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300 +#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301 #define USB_PID_NEBULA_DIGITV 0x0201 #define USB_PID_DVICO_BLUEBIRD_LGDT 0xd820 #define USB_PID_DVICO_BLUEBIRD_LG064F_COLD 0xd500 @@ -103,8 +107,17 @@ #define USB_PID_MEDION_MD95700 0x0932 #define USB_PID_KYE_DVB_T_COLD 0x701e #define USB_PID_KYE_DVB_T_WARM 0x701f -#define USB_PID_PCTV_200E 0x020e -#define USB_PID_PCTV_400E 0x020f +#define USB_PID_PCTV_200E 0x020e +#define USB_PID_PCTV_400E 0x020f +#define USB_PID_LITEON_DVB_T_COLD 0xf000 +#define USB_PID_LITEON_DVB_T_WARM 0xf001 +#define USB_PID_DIGIVOX_MINI_SL_COLD 0xe360 +#define USB_PID_DIGIVOX_MINI_SL_WARM 0xe361 +#define USB_PID_GRANDTEC_DVBT_USB2_COLD 0x0bc6 +#define USB_PID_GRANDTEC_DVBT_USB2_WARM 0x0bc7 +#define USB_PID_WINFAST_DTV_DONGLE_COLD 0x6025 +#define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026 #define USB_PID_GENPIX_8PSK_COLD 0x0200 #define USB_PID_GENPIX_8PSK_WARM 0x0201 + #endif diff --git a/linux/drivers/media/dvb/frontends/Kconfig b/linux/drivers/media/dvb/frontends/Kconfig index 0ef361f03..f25c981ad 100644 --- a/linux/drivers/media/dvb/frontends/Kconfig +++ b/linux/drivers/media/dvb/frontends/Kconfig @@ -216,7 +216,6 @@ config DVB_LGDT330X An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want to support this frontend. - comment "Miscellaneous devices" depends on DVB_CORE @@ -232,4 +231,9 @@ config DVB_ISL6421 help An SEC control chip. +config DVB_TUNER_MT2060 + tristate "Microtune MT2060 silicon IF tuner" + help + A driver for the silicon IF tuner MT2060 from Microtune. + endmenu diff --git a/linux/drivers/media/dvb/frontends/Makefile b/linux/drivers/media/dvb/frontends/Makefile index 5222245c7..b9291fd63 100644 --- a/linux/drivers/media/dvb/frontends/Makefile +++ b/linux/drivers/media/dvb/frontends/Makefile @@ -33,3 +33,4 @@ obj-$(CONFIG_DVB_LGDT330X) += lgdt330x.o obj-$(CONFIG_DVB_CX24123) += cx24123.o obj-$(CONFIG_DVB_LNBP21) += lnbp21.o obj-$(CONFIG_DVB_ISL6421) += isl6421.o +obj-$(CONFIG_DVB_TUNER_MT2060) += mt2060.o diff --git a/linux/drivers/media/dvb/frontends/dib3000.h b/linux/drivers/media/dvb/frontends/dib3000.h index ec927628d..76c203ceb 100644 --- a/linux/drivers/media/dvb/frontends/dib3000.h +++ b/linux/drivers/media/dvb/frontends/dib3000.h @@ -26,10 +26,16 @@ #include <linux/dvb/frontend.h> +struct dib3000p_agc_config { + u16 val[12]; +}; + struct dib3000_config { /* the demodulator's i2c address */ u8 demod_address; + + const struct dib3000p_agc_config *agc; }; struct dib_fe_xfer_ops @@ -46,4 +52,7 @@ extern struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config extern struct dvb_frontend* dib3000mc_attach(const struct dib3000_config* config, struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops); + +extern int dib3000mc_set_agc_config(struct dvb_frontend *fe, const struct dib3000p_agc_config *agc); + #endif // DIB3000_H diff --git a/linux/drivers/media/dvb/frontends/dib3000mc.c b/linux/drivers/media/dvb/frontends/dib3000mc.c index 6c3be2529..7bfe84545 100644 --- a/linux/drivers/media/dvb/frontends/dib3000mc.c +++ b/linux/drivers/media/dvb/frontends/dib3000mc.c @@ -559,6 +559,7 @@ static int dib3000mc_set_frontend(struct dvb_frontend* fe, static int dib3000mc_fe_init(struct dvb_frontend* fe, int mobile_mode) { struct dib3000_state *state = fe->demodulator_priv; + const struct dib3000p_agc_config *agc = state->config.agc; deb_info("init start\n"); state->timing_offset = 0; @@ -584,10 +585,24 @@ static int dib3000mc_fe_init(struct dvb_frontend* fe, int mobile_mode) /* mobile mode - portable reception */ wr_foreach(dib3000mc_reg_mobile_mode,dib3000mc_mobile_mode[1]); -/* TUNER_PANASONIC_ENV57H12D5: */ + /* AGC settings for all tuners */ wr_foreach(dib3000mc_reg_agc_bandwidth,dib3000mc_agc_bandwidth); wr_foreach(dib3000mc_reg_agc_bandwidth_general,dib3000mc_agc_bandwidth_general); - wr_foreach(dib3000mc_reg_agc,dib3000mc_agc_tuner[1]); + + /* AGC setting - specific to the tuners */ + wr(36, agc->val[0]); + wr(37, agc->val[1]); + wr(38, agc->val[2]); + wr(39, agc->val[3]); + + wr(42, agc->val[4]); + wr(43, agc->val[5]); + wr(44, agc->val[6]); + wr(45, agc->val[7]); + wr(46, agc->val[8]); + wr(47, agc->val[9]); + wr(48, agc->val[10]); + wr(49, agc->val[11]); wr(DIB3000MC_REG_UNK_110,DIB3000MC_UNK_110); wr(26,0x6680); @@ -820,6 +835,13 @@ static int dib3000mc_demod_init(struct dib3000_state *state) return 0; } +int dib3000mc_set_agc_config(struct dvb_frontend *fe, const struct dib3000p_agc_config *agc) +{ + struct dib3000_state *st = fe->demodulator_priv; + st->config.agc = agc; + return 0; +} +EXPORT_SYMBOL(dib3000mc_set_agc_config); static struct dvb_frontend_ops dib3000mc_ops; diff --git a/linux/drivers/media/dvb/frontends/dib3000mc_priv.h b/linux/drivers/media/dvb/frontends/dib3000mc_priv.h index 2930aac75..a0c8f1c91 100644 --- a/linux/drivers/media/dvb/frontends/dib3000mc_priv.h +++ b/linux/drivers/media/dvb/frontends/dib3000mc_priv.h @@ -155,30 +155,6 @@ static u16 dib3000mc_imp_noise_ctl[][2] = { { 0x1294, 0x1ff8 }, /* mode 4 */ }; -/* AGC registers */ -static u16 dib3000mc_reg_agc[] = { - 36,37,38,39,42,43,44,45,46,47,48,49 -}; - -static u16 dib3000mc_agc_tuner[][12] = { - { 0x0051, 0x301d, 0x0000, 0x1cc7, 0xcf5c, 0x6666, - 0xbae1, 0xa148, 0x3b5e, 0x3c1c, 0x001a, 0x2019 - }, /* TUNER_PANASONIC_ENV77H04D5, */ - - { 0x0051, 0x301d, 0x0000, 0x1cc7, 0xdc29, 0x570a, - 0xbae1, 0x8ccd, 0x3b6d, 0x551d, 0x000a, 0x951e - }, /* TUNER_PANASONIC_ENV57H13D5, TUNER_PANASONIC_ENV57H12D5 */ - - { 0x0051, 0x301d, 0x0000, 0x1cc7, 0xffff, 0xffff, - 0xffff, 0x0000, 0xfdfd, 0x4040, 0x00fd, 0x4040 - }, /* TUNER_SAMSUNG_DTOS333IH102, TUNER_RFAGCIN_UNKNOWN */ - - { 0x0196, 0x301d, 0x0000, 0x1cc7, 0xbd71, 0x5c29, - 0xb5c3, 0x6148, 0x6569, 0x5127, 0x0033, 0x3537 - }, /* TUNER_PROVIDER_X */ - /* TODO TUNER_PANASONIC_ENV57H10D8, TUNER_PANASONIC_ENV57H11D8 */ -}; - /* AGC loop bandwidth */ static u16 dib3000mc_reg_agc_bandwidth[] = { 40,41 }; static u16 dib3000mc_agc_bandwidth[] = { 0x119,0x330 }; diff --git a/linux/drivers/media/dvb/frontends/mt2060.c b/linux/drivers/media/dvb/frontends/mt2060.c new file mode 100644 index 000000000..14b4f588e --- /dev/null +++ b/linux/drivers/media/dvb/frontends/mt2060.c @@ -0,0 +1,312 @@ +/* + * Driver for Microtune MT2060 "Single chip dual conversion broadband tuner" + * + * Copyright (c) 2006 Olivier DANET <odanet@caramail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= + */ + +/* See mt2060_priv.h for details */ + +/* In that file, frequencies are expressed in kiloHertz to avoid 32 bits overflows */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/delay.h> +#include <linux/dvb/frontend.h> +#include "mt2060.h" +#include "mt2060_priv.h" + +static int debug=0; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); + +#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "MT2060: " args); printk("\n"); } } while (0) + +// Reads a single register +static int mt2060_readreg(struct mt2060_state *state, u8 reg, u8 *val) +{ + struct i2c_msg msg[2] = { + { .addr = state->config->i2c_address, .flags = 0, .buf = ®, .len = 1 }, + { .addr = state->config->i2c_address, .flags = I2C_M_RD, .buf = val, .len = 1 }, + }; + + if (i2c_transfer(state->i2c, msg, 2) != 2) { + printk(KERN_WARNING "mt2060 I2C read failed\n"); + return -EREMOTEIO; + } + return 0; +} + +// Writes a single register +static int mt2060_writereg(struct mt2060_state *state, u8 reg, u8 val) +{ + u8 buf[2]; + struct i2c_msg msg = { + .addr = state->config->i2c_address, .flags = 0, .buf = buf, .len = 2 + }; + buf[0]=reg; + buf[1]=val; + + if (i2c_transfer(state->i2c, &msg, 1) != 1) { + printk(KERN_WARNING "mt2060 I2C write failed\n"); + return -EREMOTEIO; + } + return 0; +} + +// Writes a set of consecutive registers +static int mt2060_writeregs(struct mt2060_state *state,u8 *buf, u8 len) +{ + struct i2c_msg msg = { + .addr = state->config->i2c_address, .flags = 0, .buf = buf, .len = len + }; + if (i2c_transfer(state->i2c, &msg, 1) != 1) { + printk(KERN_WARNING "mt2060 I2C write failed (len=%i)\n",(int)len); + return -EREMOTEIO; + } + return 0; +} + +// Initialisation sequences +// LNABAND=3, NUM1=0x3C, DIV1=0x74, NUM2=0x1080, DIV2=0x49 +static u8 mt2060_config1[] = { + REG_LO1C1, + 0x3F, 0x74, 0x00, 0x08, 0x93 +}; + +// FMCG=2, GP2=0, GP1=0 +static u8 mt2060_config2[] = { + REG_MISC_CTRL, + 0x20, 0x1E, 0x30, 0xff, 0x80, 0xff, 0x00, 0x2c, 0x42 +}; + +// VGAG=3, V1CSE=1 +static u8 mt2060_config3[] = { + REG_VGAG, + 0x33 +}; + +int mt2060_init(struct mt2060_state *state) +{ + if (mt2060_writeregs(state,mt2060_config1,sizeof(mt2060_config1))) + return -EREMOTEIO; + if (mt2060_writeregs(state,mt2060_config3,sizeof(mt2060_config3))) + return -EREMOTEIO; + return 0; +} +EXPORT_SYMBOL(mt2060_init); + +#ifdef MT2060_SPURCHECK +/* The function below calculates the frequency offset between the output frequency if2 + and the closer cross modulation subcarrier between lo1 and lo2 up to the tenth harmonic */ +static int mt2060_spurcalc(u32 lo1,u32 lo2,u32 if2) +{ + int I,J; + int dia,diamin,diff; + diamin=1000000; + for (I = 1; I < 10; I++) { + J = ((2*I*lo1)/lo2+1)/2; + diff = I*(int)lo1-J*(int)lo2; + if (diff < 0) diff=-diff; + dia = (diff-(int)if2); + if (dia < 0) dia=-dia; + if (diamin > dia) diamin=dia; + } + return diamin; +} + +#define BANDWIDTH 4000 // kHz + +/* Calculates the frequency offset to add to avoid spurs. Returns 0 if no offset is needed */ +static int mt2060_spurcheck(u32 lo1,u32 lo2,u32 if2) +{ + u32 Spur,Sp1,Sp2; + int I,J; + I=0; + J=1000; + + Spur=mt2060_spurcalc(lo1,lo2,if2); + if (Spur < BANDWIDTH) { + /* Potential spurs detected */ + dprintk("Spurs before : f_lo1: %d f_lo2: %d (kHz)", + (int)lo1,(int)lo2); + I=1000; + Sp1 = mt2060_spurcalc(lo1+I,lo2+I,if2); + Sp2 = mt2060_spurcalc(lo1-I,lo2-I,if2); + + if (Sp1 < Sp2) { + J=-J; I=-I; Spur=Sp2; + } else + Spur=Sp1; + + while (Spur < BANDWIDTH) { + I += J; + Spur = mt2060_spurcalc(lo1+I,lo2+I,if2); + } + dprintk("Spurs after : f_lo1: %d f_lo2: %d (kHz)", + (int)(lo1+I),(int)(lo2+I)); + } + return I; +} +#endif + +#define IF2 36150 // IF2 frequency = 36.150 MHz +#define FREF 16000 // Quartz oscillator 16 MHz + +int mt2060_set(struct mt2060_state *state, struct dvb_frontend_parameters *fep) +{ + int ret=0; + int i=0; + u32 freq; + u8 lnaband; + u32 f_lo1,f_lo2; + u32 div1,num1,div2,num2; + u8 b[8]; + u32 if1; + + if1 = state->if1_freq; + b[0] = REG_LO1B1; + b[1] = 0xFF; + mt2060_writeregs(state,b,2); + + freq = fep->frequency / 1000; // Hz -> kHz + + f_lo1 = freq + if1 * 1000; + f_lo1 = (f_lo1/250)*250; + f_lo2 = f_lo1 - freq - IF2; + f_lo2 = (f_lo2/50)*50; + +#ifdef MT2060_SPURCHECK + // LO-related spurs detection and correction + num1 = mt2060_spurcheck(f_lo1,f_lo2,IF2); + f_lo1 += num1; + f_lo2 += num1; +#endif + //Frequency LO1 = 16MHz * (DIV1 + NUM1/64 ) + div1 = f_lo1 / FREF; + num1 = (64 * (f_lo1 % FREF) )/FREF; + + // Frequency LO2 = 16MHz * (DIV2 + NUM2/8192 ) + div2 = f_lo2 / FREF; + num2 = (16384 * (f_lo2 % FREF) /FREF +1)/2; + + if (freq <= 95000) lnaband = 0xB0; else + if (freq <= 180000) lnaband = 0xA0; else + if (freq <= 260000) lnaband = 0x90; else + if (freq <= 335000) lnaband = 0x80; else + if (freq <= 425000) lnaband = 0x70; else + if (freq <= 480000) lnaband = 0x60; else + if (freq <= 570000) lnaband = 0x50; else + if (freq <= 645000) lnaband = 0x40; else + if (freq <= 730000) lnaband = 0x30; else + if (freq <= 810000) lnaband = 0x20; else lnaband = 0x10; + + b[0] = REG_LO1C1; + b[1] = lnaband | ((num1 >>2) & 0x0F); + b[2] = div1; + b[3] = (num2 & 0x0F) | ((num1 & 3) << 4); + b[4] = num2 >> 4; + b[5] = ((num2 >>12) & 1) | (div2 << 1); + + dprintk("IF1: %dMHz",(int)if1); + dprintk("PLL freq: %d f_lo1: %d f_lo2: %d (kHz)",(int)freq,(int)f_lo1,(int)f_lo2); + dprintk("PLL div1: %d num1: %d div2: %d num2: %d",(int)div1,(int)num1,(int)div2,(int)num2); + dprintk("PLL [1..5]: %2x %2x %2x %2x %2x",(int)b[1],(int)b[2],(int)b[3],(int)b[4],(int)b[5]); + + mt2060_writeregs(state,b,6); + + //Waits for pll lock or timeout + i=0; + do { + mt2060_readreg(state,REG_LO_STATUS,b); + if ((b[0] & 0x88)==0x88) break; + msleep(4); + i++; + } while (i<10); + + return ret; +} +EXPORT_SYMBOL(mt2060_set); + +/* from usbsnoop.log */ +static void mt2060_calibrate(struct mt2060_state *state) +{ + u8 b = 0; + int i = 0; + + if (mt2060_writeregs(state,mt2060_config1,sizeof(mt2060_config1))) + return; + if (mt2060_writeregs(state,mt2060_config2,sizeof(mt2060_config2))) + return; + + do { + b |= (1 << 6); // FM1SS; + mt2060_writereg(state, REG_LO2C1,b); + msleep(20); + + if (i == 0) { + b |= (1 << 7); // FM1CA; + mt2060_writereg(state, REG_LO2C1,b); + b &= ~(1 << 7); // FM1CA; + msleep(20); + } + + b &= ~(1 << 6); // FM1SS + mt2060_writereg(state, REG_LO2C1,b); + + msleep(20); + i++; + } while (i < 9); + + i = 0; + while (i++ < 10 && mt2060_readreg(state, REG_MISC_STAT, &b) == 0 && (b & (1 << 6)) == 0) + msleep(20); + + if (i < 10) { + mt2060_readreg(state, REG_FM_FREQ, &state->fmfreq); // now find out, what is fmreq used for :) + dprintk("calibration was successful: %d", state->fmfreq); + } else + dprintk("FMCAL timed out"); +} + +/* This functions tries to identify a MT2060 tuner by reading the PART/REV register. This is hasty. */ +int mt2060_attach(struct mt2060_state *state, struct mt2060_config *config, struct i2c_adapter *i2c,u16 if1) +{ + u8 id = 0; + memset(state,0,sizeof(struct mt2060_state)); + + state->config = config; + state->i2c = i2c; + state->if1_freq = if1; + + if (mt2060_readreg(state,REG_PART_REV,&id) != 0) + return -ENODEV; + + if (id != PART_REV) + return -ENODEV; + + printk(KERN_INFO "MT2060: successfully identified\n"); + + mt2060_calibrate(state); + + return 0; +} +EXPORT_SYMBOL(mt2060_attach); + +MODULE_AUTHOR("Olivier DANET"); +MODULE_DESCRIPTION("Microtune MT2060 silicon tuner driver"); +MODULE_LICENSE("GPL"); diff --git a/linux/drivers/media/dvb/frontends/mt2060.h b/linux/drivers/media/dvb/frontends/mt2060.h new file mode 100644 index 000000000..d5dae102f --- /dev/null +++ b/linux/drivers/media/dvb/frontends/mt2060.h @@ -0,0 +1,44 @@ +/* + * Driver for Microtune MT2060 "Single chip dual conversion broadband tuner" + * + * Copyright (c) 2006 Olivier DANET <odanet@caramail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= + */ + +#ifndef MT2060_H +#define MT2060_H + +#include <linux/i2c.h> +#include <linux/dvb/frontend.h> + +struct mt2060_config { + u8 i2c_address; + /* Shall we add settings for the discrete outputs ? */ +}; + +struct mt2060_state { + struct mt2060_config *config; + struct i2c_adapter *i2c; + u16 if1_freq; + u8 fmfreq; +}; + +extern int mt2060_init(struct mt2060_state *state); +extern int mt2060_set(struct mt2060_state *state, struct dvb_frontend_parameters *fep); +extern int mt2060_attach(struct mt2060_state *state, struct mt2060_config *config, struct i2c_adapter *i2c,u16 if1); + +#endif diff --git a/linux/drivers/media/dvb/frontends/mt2060_priv.h b/linux/drivers/media/dvb/frontends/mt2060_priv.h new file mode 100644 index 000000000..47e691e44 --- /dev/null +++ b/linux/drivers/media/dvb/frontends/mt2060_priv.h @@ -0,0 +1,95 @@ +/* + * Driver for Microtune MT2060 "Single chip dual conversion broadband tuner" + * + * Copyright (c) 2006 Olivier DANET <odanet@caramail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.= + */ + +#ifndef MT2060_PRIV_H +#define MT2060_PRIV_H + +// Uncomment the #define below to enable spurs checking. The results where quite unconvincing. +// #define MT2060_SPURCHECK + +/* This driver is based on the information available in the datasheet of the + "Comtech SDVBT-3K6M" tuner ( K1000737843.pdf ) which features the MT2060 register map : + + I2C Address : 0x60 + + Reg.No | B7 | B6 | B5 | B4 | B3 | B2 | B1 | B0 | ( defaults ) + -------------------------------------------------------------------------------- + 00 | [ PART ] | [ REV ] | R = 0x63 + 01 | [ LNABAND ] | [ NUM1(5:2) ] | RW = 0x3F + 02 | [ DIV1 ] | RW = 0x74 + 03 | FM1CA | FM1SS | [ NUM1(1:0) ] | [ NUM2(3:0) ] | RW = 0x00 + 04 | NUM2(11:4) ] | RW = 0x08 + 05 | [ DIV2 ] |NUM2(12)| RW = 0x93 + 06 | L1LK | [ TAD1 ] | L2LK | [ TAD2 ] | R + 07 | [ FMF ] | R + 08 | ? | FMCAL | ? | ? | ? | ? | ? | TEMP | R + 09 | 0 | 0 | [ FMGC ] | 0 | GP02 | GP01 | 0 | RW = 0x20 + 0A | ?? + 0B | 0 | 0 | 1 | 1 | 0 | 0 | [ VGAG ] | RW = 0x30 + 0C | V1CSE | 1 | 1 | 1 | 1 | 1 | 1 | 1 | RW = 0xFF + 0D | 1 | 0 | [ V1CS ] | RW = 0xB0 + 0E | ?? + 0F | ?? + 10 | ?? + 11 | [ LOTO ] | 0 | 0 | 1 | 0 | RW = 0x42 + + PART : Part code : 6 for MT2060 + REV : Revision code : 3 for current revision + LNABAND : Input frequency range : ( See code for details ) + NUM1 / DIV1 / NUM2 / DIV2 : Frequencies programming ( See code for details ) + FM1CA : Calibration Start Bit + FM1SS : Calibration Single Step bit + L1LK : LO1 Lock Detect + TAD1 : Tune Line ADC ( ? ) + L2LK : LO2 Lock Detect + TAD2 : Tune Line ADC ( ? ) + FMF : Estimated first IF Center frequency Offset ( ? ) + FM1CAL : Calibration done bit + TEMP : On chip temperature sensor + FMCG : Mixer 1 Cap Gain ( ? ) + GP01 / GP02 : Programmable digital outputs. Unconnected pins ? + V1CSE : LO1 VCO Automatic Capacitor Select Enable ( ? ) + V1CS : LO1 Capacitor Selection Value ( ? ) + LOTO : LO Timeout ( ? ) + VGAG : Tuner Output gain +*/ + +#define I2C_ADDRESS 0x60 + +#define REG_PART_REV 0 +#define REG_LO1C1 1 +#define REG_LO1C2 2 +#define REG_LO2C1 3 +#define REG_LO2C2 4 +#define REG_LO2C3 5 +#define REG_LO_STATUS 6 +#define REG_FM_FREQ 7 +#define REG_MISC_STAT 8 +#define REG_MISC_CTRL 9 +#define REG_RESERVED_A 0x0A +#define REG_VGAG 0x0B +#define REG_LO1B1 0x0C +#define REG_LO1B2 0x0D +#define REG_LOTO 0x11 + +#define PART_REV 0x63 // The current driver works only with PART=6 and REV=3 chips + +#endif diff --git a/mailimport b/mailimport index 596b5ef00..2bcd2a09f 100755 --- a/mailimport +++ b/mailimport @@ -25,18 +25,18 @@ fi MBOX=$1 if [ "$TMPDIR" == "" ]; then - TMPDIR=/tmp + TMPDIR=/tmp fi if [ "$EDITOR" == "" ]; then - EDITOR=nano + EDITOR=nano fi DIR=$TMPDIR/mailimport$$ mkdir $DIR if [ "$?" != "0" ]; then - echo "*** Error at mkdir $DIR" - exit; + echo "*** Error at mkdir $DIR" + exit; fi trap "rm -rf $DIR" EXIT TMP2=$DIR/patchheader diff --git a/v4l/Makefile.kernel b/v4l/Makefile.kernel index b01c17f55..bbcfdc6d3 100644 --- a/v4l/Makefile.kernel +++ b/v4l/Makefile.kernel @@ -1,8 +1,8 @@ -# This Makefile is used to build sources that are part of the kernel tree. +# This Makefile is used to build sources that are part of the kernel tree. # What we want are the various programs used by the kconfig system. We can't # just directly call the top-level kernel Makefile, as it doesn't provide # targets to only build the kconfig system. It provides targets to build -# the kconfig system *and then configure the kernel*. +# the kconfig system *and then configure the kernel*. # What we do is include the top-level kernel Makefile here, to get all the # variables and rules it defines, and then add our own targets to just build @@ -32,7 +32,7 @@ v4l-qconf: scripts_basic # Used by the qconfig target v4l-gconf: scripts_basic $(MAKE) $(build)=scripts/kconfig gconf-target=1 scripts/kconfig/gconf - + # Used by the menuconfig target, also needs lxdialog v4l-mconf: scripts_basic $(MAKE) $(build)=scripts/kconfig scripts/kconfig/mconf diff --git a/v4l/compat.h b/v4l/compat.h index ca0a4b886..ae34380e0 100644 --- a/v4l/compat.h +++ b/v4l/compat.h @@ -88,24 +88,24 @@ static inline unsigned long msecs_to_jiffies(const unsigned int m) { #if HZ <= 1000 && !(1000 % HZ) - return (m + (1000 / HZ) - 1) / (1000 / HZ); + return (m + (1000 / HZ) - 1) / (1000 / HZ); #else #if HZ > 1000 && !(HZ % 1000) - return m * (HZ / 1000); + return m * (HZ / 1000); #else - return (m * HZ + 999) / 1000; + return (m * HZ + 999) / 1000; #endif #endif } static inline unsigned int jiffies_to_msecs(const unsigned long j) { #if HZ <= 1000 && !(1000 % HZ) - return (1000 / HZ) * j; + return (1000 / HZ) * j; #else #if HZ > 1000 && !(HZ % 1000) - return (j + (HZ / 1000) - 1)/(HZ / 1000); + return (j + (HZ / 1000) - 1)/(HZ / 1000); #else - return (j * 1000) / HZ; + return (j * 1000) / HZ; #endif #endif } @@ -135,15 +135,15 @@ static inline unsigned long msleep_interruptible(unsigned int msecs) #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) /* some keys from 2.6.x which are not (yet?) in 2.4.x */ # define KEY_PLAY 207 -# define KEY_PRINT 210 +# define KEY_PRINT 210 # define KEY_EMAIL 215 # define KEY_SEARCH 217 -# define KEY_SELECT 0x161 +# define KEY_SELECT 0x161 # define KEY_GOTO 0x162 # define KEY_INFO 0x166 # define KEY_CHANNEL 0x16b # define KEY_LANGUAGE 0x170 -# define KEY_SUBTITLE 0x172 +# define KEY_SUBTITLE 0x172 # define KEY_ZOOM 0x174 # define KEY_MODE 0x175 # define KEY_TV 0x179 @@ -159,7 +159,7 @@ static inline unsigned long msleep_interruptible(unsigned int msecs) # define KEY_BLUE 0x191 # define KEY_CHANNELUP 0x192 # define KEY_CHANNELDOWN 0x193 -# define KEY_RESTART 0x198 +# define KEY_RESTART 0x198 # define KEY_SHUFFLE 0x19a # define KEY_NEXT 0x197 # define KEY_RADIO 0x181 @@ -188,8 +188,8 @@ static inline unsigned long msleep_interruptible(unsigned int msecs) #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) #define container_of(ptr, type, member) ({ \ - const typeof( ((type *)0)->member ) *__mptr = (ptr); \ - (type *)( (char *)__mptr - offsetof(type,member) );}) + const typeof( ((type *)0)->member ) *__mptr = (ptr); \ + (type *)( (char *)__mptr - offsetof(type,member) );}) #endif #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) @@ -207,12 +207,12 @@ static inline unsigned long vmalloc_to_pfn(void * vmalloc_addr) do { \ DEFINE_WAIT(__wait); \ for (;;) { \ - prepare_to_wait(&wq, &__wait, TASK_UNINTERRUPTIBLE); \ - if (condition) \ - break; \ - __ret = schedule_timeout(__ret); \ - if (!__ret) \ - break; \ + prepare_to_wait(&wq, &__wait, TASK_UNINTERRUPTIBLE); \ + if (condition) \ + break; \ + __ret = schedule_timeout(__ret); \ + if (!__ret) \ + break; \ } \ finish_wait(&wq, &__wait); \ } while (0); \ @@ -231,9 +231,9 @@ static inline unsigned long vmalloc_to_pfn(void * vmalloc_addr) void * __ret = NULL; \ __ret = kmalloc(n * size, flags); \ if (__ret) \ - memset(__ret, 0, n * size); \ + memset(__ret, 0, n * size); \ __ret; \ -}) +}) #endif #endif @@ -241,10 +241,10 @@ static inline unsigned long vmalloc_to_pfn(void * vmalloc_addr) #ifndef kzalloc #define kzalloc(size, flags) \ ({ \ - void *__ret = kmalloc(size, flags); \ - if (__ret) \ - memset(__ret, 0, size); \ - __ret; \ + void *__ret = kmalloc(size, flags); \ + if (__ret) \ + memset(__ret, 0, size); \ + __ret; \ }) #endif #endif diff --git a/v4l/scripts/hghead.pl b/v4l/scripts/hghead.pl index 3f8b4b0ba..fdc9720c6 100755 --- a/v4l/scripts/hghead.pl +++ b/v4l/scripts/hghead.pl @@ -110,7 +110,7 @@ while ($line = <IN>) { next; } - + if ($line =~ m/^Acked-by:.*/) { $signed="$signed$line"; next; diff --git a/v4l/scripts/make_myconfig.pl b/v4l/scripts/make_myconfig.pl index 7323f419c..0bde6f6c0 100755 --- a/v4l/scripts/make_myconfig.pl +++ b/v4l/scripts/make_myconfig.pl @@ -15,7 +15,7 @@ open IN,".config"; while (<IN>) { if (m/\s*(\w+)=\s*(\S*)/) { #printf "%s=%s\n",$1,$2; - $config { $1 } = $2; + $config { $1 } = $2; } } close IN; diff --git a/v4l/scripts/makelinks.sh b/v4l/scripts/makelinks.sh index 03fd48849..187145822 100755 --- a/v4l/scripts/makelinks.sh +++ b/v4l/scripts/makelinks.sh @@ -5,7 +5,7 @@ if test -z $1 || ! test -d $1 ; then echo echo " usage: $0 <path_to_kernel_to_patch>" echo - exit + exit fi echo "patching $1..." @@ -14,15 +14,15 @@ cd linux PWD=`pwd` for x in `find drivers -type d | grep -v CVS` ; do - mkdir -p -v $1/$x + mkdir -p -v $1/$x done for x in `find Documentation -type d | grep -v CVS` ; do - mkdir -p -v $1/$x + mkdir -p -v $1/$x done for x in `find include -type d | grep -v CVS` ; do - mkdir -p -v $1/$x + mkdir -p -v $1/$x done for x in `find Documentation -type f | grep -v CVS | grep -v .cvsignore` ; do diff --git a/v4l/versions.txt b/v4l/versions.txt index 2c74da43f..0d7c9e5dc 100644 --- a/v4l/versions.txt +++ b/v4l/versions.txt @@ -198,6 +198,7 @@ DVB_BCM3510 DVB_LGDT330X DVB_LNBP21 DVB_ISL6421 +DVB_TUNER_MT2060 VIDEO_SAA7146 VIDEO_SAA7146_VV VIDEO_VIDEOBUF |