diff options
| -rw-r--r-- | linux/drivers/media/video/em28xx/em28xx-cards.c | 67 | ||||
| -rw-r--r-- | linux/drivers/media/video/em28xx/em28xx-video.c | 1 | ||||
| -rw-r--r-- | linux/drivers/media/video/em28xx/em28xx.h | 2 | ||||
| -rw-r--r-- | v4l/ChangeLog | 13 |
4 files changed, 69 insertions, 14 deletions
diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c index e3bcad2b8..21e76a221 100644 --- a/linux/drivers/media/video/em28xx/em28xx-cards.c +++ b/linux/drivers/media/video/em28xx/em28xx-cards.c @@ -137,6 +137,28 @@ struct em28xx_board em28xx_boards[] = { .amux = 1, }}, }, + [EM2880_BOARD_WINTV_HVR_900] = { + .name = "WinTV HVR 900", + .vchannels = 3, + .norm = VIDEO_MODE_PAL, + .has_tuner = 0, + .tda9887_conf = TDA9887_PRESENT, + .has_tuner = 1, + .decoder = EM28XX_TVP5150, + .input = {{ + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 2, + .amux = 0, + },{ + .type = EM28XX_VMUX_TELEVISION, + .vmux = 0, + .amux = 1, + },{ + .type = EM28XX_VMUX_SVIDEO, + .vmux = 9, + .amux = 1, + }}, + }, [EM2820_BOARD_MSI_VOX_USB_2] = { .name = "MSI VOX USB 2.0", .vchannels = 3, @@ -255,30 +277,47 @@ struct usb_device_id em28xx_id_table [] = { { USB_DEVICE(0x2304, 0x0208), .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, { USB_DEVICE(0x2040, 0x4200), .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, { USB_DEVICE(0x2304, 0x0207), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, + { USB_DEVICE(0x2040, 0x6500), .driver_info = EM2880_BOARD_WINTV_HVR_900 }, { }, }; +void em28xx_pre_card_setup(struct em28xx *dev) +{ + /* request some modules */ + switch(dev->model){ + case EM2880_BOARD_WINTV_HVR_900: + { + em28xx_write_regs_req(dev, 0x00, 0x08, "\x7d", 1); // reset through GPIO? + break; + } + } +} + void em28xx_card_setup(struct em28xx *dev) { /* request some modules */ - if (dev->model == EM2820_BOARD_HAUPPAUGE_WINTV_USB_2) { - struct tveeprom tv; + switch(dev->model){ + case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: + { + struct tveeprom tv; #ifdef CONFIG_MODULES - request_module("tveeprom"); - request_module("ir-kbd-i2c"); - request_module("msp3400"); + request_module("tveeprom"); + request_module("ir-kbd-i2c"); + request_module("msp3400"); #endif - /* Call first TVeeprom */ + /* Call first TVeeprom */ - dev->i2c_client.addr = 0xa0 >> 1; - tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata); + dev->i2c_client.addr = 0xa0 >> 1; + tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata); - dev->tuner_type= tv.tuner_type; - if (tv.audio_processor == AUDIO_CHIP_MSP34XX) { - dev->i2s_speed=2048000; - dev->has_msp34xx=1; - } else - dev->has_msp34xx=0; + dev->tuner_type= tv.tuner_type; + if (tv.audio_processor == AUDIO_CHIP_MSP34XX) { + dev->i2s_speed=2048000; + dev->has_msp34xx=1; + } else + dev->has_msp34xx=0; + break; + } } } diff --git a/linux/drivers/media/video/em28xx/em28xx-video.c b/linux/drivers/media/video/em28xx/em28xx-video.c index ccd2e8cee..30121f0ad 100644 --- a/linux/drivers/media/video/em28xx/em28xx-video.c +++ b/linux/drivers/media/video/em28xx/em28xx-video.c @@ -1918,6 +1918,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->vpic.depth = 16; dev->vpic.palette = VIDEO_PALETTE_YUV422; + em28xx_pre_card_setup(dev); #ifdef CONFIG_MODULES /* request some modules */ if (dev->decoder == EM28XX_SAA7113 || dev->decoder == EM28XX_SAA7114) diff --git a/linux/drivers/media/video/em28xx/em28xx.h b/linux/drivers/media/video/em28xx/em28xx.h index 30e1f006b..c3bf56b28 100644 --- a/linux/drivers/media/video/em28xx/em28xx.h +++ b/linux/drivers/media/video/em28xx/em28xx.h @@ -42,6 +42,7 @@ #define EM2800_BOARD_LEADTEK_WINFAST_USBII 7 #define EM2800_BOARD_KWORLD_USB2800 8 #define EM2820_BOARD_PINNACLE_DVC_90 9 +#define EM2880_BOARD_WINTV_HVR_900 10 #define UNSET -1 @@ -328,6 +329,7 @@ int em28xx_set_alternate(struct em28xx *dev); /* Provided by em28xx-cards.c */ extern int em2800_variant_detect(struct usb_device* udev,int model); +extern void em28xx_pre_card_setup(struct em28xx *dev); extern void em28xx_card_setup(struct em28xx *dev); extern struct em28xx_board em28xx_boards[]; extern struct usb_device_id em28xx_id_table[]; diff --git a/v4l/ChangeLog b/v4l/ChangeLog index b93e06095..fc61390dd 100644 --- a/v4l/ChangeLog +++ b/v4l/ChangeLog @@ -1,3 +1,16 @@ +2006-01-22 19:43 mrechberger + + * linux/drivers/media/video/em28xx/em28xx-cards.c: + (em28xx_pre_card_setup), (em28xx_card_setup): + * linux/drivers/media/video/em28xx/em28xx-video.c: + * linux/drivers/media/video/em28xx/em28xx.h: + + - added support for Hauppauge WinTV HVR 900 + only composite works at the moment + tuner development Xceive xc3024 is in progress + + Signed-off-by: Markus Rechberger <mrechberger@gmail.com> + 2006-01-22 19:21 mkrufky * linux/drivers/media/video/em28xx/em28xx-core.c: |