diff options
Diffstat (limited to 'linux/drivers/media/dvb/dvb-usb')
| -rw-r--r-- | linux/drivers/media/dvb/dvb-usb/Kconfig | 3 | ||||
| -rw-r--r-- | linux/drivers/media/dvb/dvb-usb/anysee.c | 4 | ||||
| -rw-r--r-- | linux/drivers/media/dvb/dvb-usb/dvb-usb-urb.c | 6 | ||||
| -rw-r--r-- | linux/drivers/media/dvb/dvb-usb/dw2102.c | 13 |
4 files changed, 18 insertions, 8 deletions
diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig index 3c13bcfa6..62b68c291 100644 --- a/linux/drivers/media/dvb/dvb-usb/Kconfig +++ b/linux/drivers/media/dvb/dvb-usb/Kconfig @@ -261,7 +261,7 @@ config DVB_USB_DW2102 Say Y here to support the DvbWorld DVB-S/S2 USB2.0 receivers and the TeVii S650. -config DVB_USB_CINERGY_T2 +config DVB_USB_CINERGY_T2 tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver" depends on DVB_USB help @@ -283,6 +283,7 @@ config DVB_USB_ANYSEE config DVB_USB_DTV5100 tristate "AME DTV-5100 USB2.0 DVB-T support" depends on DVB_USB + select DVB_ZL10353 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE help Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver. diff --git a/linux/drivers/media/dvb/dvb-usb/anysee.c b/linux/drivers/media/dvb/dvb-usb/anysee.c index c786359fb..cd2edbcaa 100644 --- a/linux/drivers/media/dvb/dvb-usb/anysee.c +++ b/linux/drivers/media/dvb/dvb-usb/anysee.c @@ -46,7 +46,7 @@ module_param_named(delsys, dvb_usb_anysee_delsys, int, 0644); MODULE_PARM_DESC(delsys, "select delivery mode (0=DVB-C, 1=DVB-T)"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); -static struct mutex anysee_usb_mutex; +static DEFINE_MUTEX(anysee_usb_mutex); static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, u8 *rbuf, u8 rlen) @@ -456,8 +456,6 @@ static int anysee_probe(struct usb_interface *intf, struct usb_host_interface *alt; int ret; - mutex_init(&anysee_usb_mutex); - /* There is one interface with two alternate settings. Alternate setting 0 is for bulk transfer. Alternate setting 1 is for isochronous transfer. diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-urb.c b/linux/drivers/media/dvb/dvb-usb/dvb-usb-urb.c index 5cef12a07..6fe71c674 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-urb.c +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-urb.c @@ -13,14 +13,14 @@ int dvb_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, { int actlen,ret = -ENOMEM; + if (!d || wbuf == NULL || wlen == 0) + return -EINVAL; + if (d->props.generic_bulk_ctrl_endpoint == 0) { err("endpoint for generic control not specified."); return -EINVAL; } - if (wbuf == NULL || wlen == 0) - return -EINVAL; - if ((ret = mutex_lock_interruptible(&d->usb_mutex))) return ret; diff --git a/linux/drivers/media/dvb/dvb-usb/dw2102.c b/linux/drivers/media/dvb/dvb-usb/dw2102.c index ca53df61c..c9431713d 100644 --- a/linux/drivers/media/dvb/dvb-usb/dw2102.c +++ b/linux/drivers/media/dvb/dvb-usb/dw2102.c @@ -9,7 +9,6 @@ * * see Documentation/dvb/README.dvb-usb for more information */ -#include <linux/version.h> #include "dw2102.h" #include "si21xx.h" #include "stv0299.h" @@ -422,6 +421,18 @@ static int dw210x_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) return 0; } +static struct stv0299_config sharp_z0194a_config = { + .demod_address = 0x68, + .inittab = sharp_z0194a_inittab, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = sharp_z0194a_set_symbol_rate, +}; + static struct cx24116_config dw2104_config = { .demod_address = 0x55, .mpg_clk_pos_pol = 0x01, |