diff options
Diffstat (limited to 'linux/drivers/media/dvb/frontends')
-rw-r--r-- | linux/drivers/media/dvb/frontends/bsbe1.h | 58 | ||||
-rw-r--r-- | linux/drivers/media/dvb/frontends/bsru6.h | 2 | ||||
-rw-r--r-- | linux/drivers/media/dvb/frontends/stv0299.c | 45 | ||||
-rw-r--r-- | linux/drivers/media/dvb/frontends/stv0299.h | 11 |
4 files changed, 57 insertions, 59 deletions
diff --git a/linux/drivers/media/dvb/frontends/bsbe1.h b/linux/drivers/media/dvb/frontends/bsbe1.h index d8f65738e..5e431ebd0 100644 --- a/linux/drivers/media/dvb/frontends/bsbe1.h +++ b/linux/drivers/media/dvb/frontends/bsbe1.h @@ -1,5 +1,5 @@ /* - * bsbe1.h - ALPS BSBE1 tuner support (moved from av7110.c) + * bsbe1.h - ALPS BSBE1 tuner support * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -26,44 +26,24 @@ #define BSBE1_H static u8 alps_bsbe1_inittab[] = { - 0x01, 0x15, - 0x02, 0x30, - 0x03, 0x00, + 0x01, 0x15, /* XTAL = 4MHz, VCO = 352 MHz */ + 0x02, 0x30, /* MCLK = 88 MHz */ + 0x03, 0x00, /* ACR output 0 */ 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ - 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ - 0x06, 0x40, /* DAC not used, set to high impendance mode */ - 0x07, 0x00, /* DAC LSB */ + 0x05, 0x05, /* I2CT = 0, SCLT = 1, SDAT = 1 */ + 0x06, 0x00, /* DAC output 0 */ 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ 0x09, 0x00, /* FIFO */ - 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ - 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ - 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ - 0x10, 0x3f, // AGC2 0x3d - 0x11, 0x84, - 0x12, 0xb9, - 0x15, 0xc9, // lock detector threshold - 0x16, 0x00, - 0x17, 0x00, - 0x18, 0x00, - 0x19, 0x00, - 0x1a, 0x00, - 0x1f, 0x50, - 0x20, 0x00, - 0x21, 0x00, - 0x22, 0x00, - 0x23, 0x00, - 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 - 0x29, 0x1e, // 1/2 threshold - 0x2a, 0x14, // 2/3 threshold - 0x2b, 0x0f, // 3/4 threshold - 0x2c, 0x09, // 5/6 threshold - 0x2d, 0x05, // 7/8 threshold - 0x2e, 0x01, - 0x31, 0x1f, // test all FECs - 0x32, 0x19, // viterbi and synchro search - 0x33, 0xfc, // rs control - 0x34, 0x93, // error control - 0x0f, 0x92, + 0x0c, 0x51, /* OP1/OP0 normal, val = 1 (LNB power on) */ + 0x0d, 0x82, /* DC offset compensation = on, beta_agc1 = 2 */ + 0x0f, 0x92, /* AGC1R */ + 0x10, 0x34, /* AGC2O */ + 0x11, 0x84, /* TLSR */ + 0x12, 0xb9, /* CFD */ + 0x15, 0xc9, /* lock detector threshold */ + 0x28, 0x00, /* out imp: normal, type: parallel, FEC mode: QPSK */ + 0x33, 0xfc, /* RS control */ + 0x34, 0x93, /* count viterbi bit errors per 2E18 bytes */ 0xff, 0xff }; @@ -100,11 +80,11 @@ static int alps_bsbe1_tuner_set_params(struct dvb_frontend* fe, struct dvb_front if ((params->frequency < 950000) || (params->frequency > 2150000)) return -EINVAL; - div = (params->frequency + (125 - 1)) / 125; // round correctly + div = params->frequency / 1000; data[0] = (div >> 8) & 0x7f; data[1] = div & 0xff; - data[2] = 0x80 | ((div & 0x18000) >> 10) | 4; - data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4; + data[2] = 0x80 | ((div & 0x18000) >> 10) | 0x1; + data[3] = 0xe0; if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); diff --git a/linux/drivers/media/dvb/frontends/bsru6.h b/linux/drivers/media/dvb/frontends/bsru6.h index e231cd84b..45a6dfd8e 100644 --- a/linux/drivers/media/dvb/frontends/bsru6.h +++ b/linux/drivers/media/dvb/frontends/bsru6.h @@ -133,7 +133,7 @@ static struct stv0299_config alps_bsru6_config = { .mclk = 88000000UL, .invert = 1, .skip_reinit = 0, - .lock_output = STV0229_LOCKOUTPUT_1, + .lock_output = STV0299_LOCKOUTPUT_1, .volt13_op0_op1 = STV0299_VOLT13_OP1, .min_delay_ms = 100, .set_symbol_rate = alps_bsru6_set_symbol_rate, diff --git a/linux/drivers/media/dvb/frontends/stv0299.c b/linux/drivers/media/dvb/frontends/stv0299.c index f7c367415..17556183e 100644 --- a/linux/drivers/media/dvb/frontends/stv0299.c +++ b/linux/drivers/media/dvb/frontends/stv0299.c @@ -366,26 +366,32 @@ static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltag * H/V switching over OP0, OP1 and OP2 are LNB power enable bits */ reg0x0c &= 0x0f; - - if (voltage == SEC_VOLTAGE_OFF) { - stv0299_writeregI (state, 0x0c, 0x00); /* LNB power off! */ - return stv0299_writeregI (state, 0x08, 0x00); /* LNB power off! */ - } - - stv0299_writeregI (state, 0x08, (reg0x08 & 0x3f) | (state->config->lock_output << 6)); + reg0x08 = (reg0x08 & 0x3f) | (state->config->lock_output << 6); switch (voltage) { case SEC_VOLTAGE_13: - if (state->config->volt13_op0_op1 == STV0299_VOLT13_OP0) reg0x0c |= 0x10; - else reg0x0c |= 0x40; - - return stv0299_writeregI(state, 0x0c, reg0x0c); - + if (state->config->volt13_op0_op1 == STV0299_VOLT13_OP0) + reg0x0c |= 0x10; /* OP1 off, OP0 on */ + else + reg0x0c |= 0x40; /* OP1 on, OP0 off */ + break; case SEC_VOLTAGE_18: - return stv0299_writeregI(state, 0x0c, reg0x0c | 0x50); + reg0x0c |= 0x50; /* OP1 on, OP0 on */ + break; + case SEC_VOLTAGE_OFF: + /* LNB power off! */ + reg0x08 = 0x00; + reg0x0c = 0x00; + break; default: return -EINVAL; }; + + if (state->config->op0_off) + reg0x0c &= ~0x10; + + stv0299_writeregI(state, 0x08, reg0x08); + return stv0299_writeregI(state, 0x0c, reg0x0c); } static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long cmd) @@ -445,11 +451,20 @@ static int stv0299_init (struct dvb_frontend* fe) { struct stv0299_state* state = fe->demodulator_priv; int i; + u8 reg; + u8 val; dprintk("stv0299: init chip\n"); - for (i=0; !(state->config->inittab[i] == 0xff && state->config->inittab[i+1] == 0xff); i+=2) - stv0299_writeregI(state, state->config->inittab[i], state->config->inittab[i+1]); + for (i = 0; ; i += 2) { + reg = state->config->inittab[i]; + val = state->config->inittab[i+1]; + if (reg == 0xff && val == 0xff) + break; + if (reg == 0x0c && state->config->op0_off) + val &= ~0x10; + stv0299_writeregI(state, reg, val); + } return 0; } diff --git a/linux/drivers/media/dvb/frontends/stv0299.h b/linux/drivers/media/dvb/frontends/stv0299.h index 84eaeb518..3282f4302 100644 --- a/linux/drivers/media/dvb/frontends/stv0299.h +++ b/linux/drivers/media/dvb/frontends/stv0299.h @@ -48,10 +48,10 @@ #include <linux/dvb/frontend.h> #include "dvb_frontend.h" -#define STV0229_LOCKOUTPUT_0 0 -#define STV0229_LOCKOUTPUT_1 1 -#define STV0229_LOCKOUTPUT_CF 2 -#define STV0229_LOCKOUTPUT_LK 3 +#define STV0299_LOCKOUTPUT_0 0 +#define STV0299_LOCKOUTPUT_1 1 +#define STV0299_LOCKOUTPUT_CF 2 +#define STV0299_LOCKOUTPUT_LK 3 #define STV0299_VOLT13_OP0 0 #define STV0299_VOLT13_OP1 1 @@ -82,6 +82,9 @@ struct stv0299_config /* Is 13v controlled by OP0 or OP1? */ u8 volt13_op0_op1:1; + /* Turn-off OP0? */ + u8 op0_off:1; + /* minimum delay before retuning */ int min_delay_ms; |