diff options
Diffstat (limited to 'linux/drivers/media/dvb')
| -rw-r--r-- | linux/drivers/media/dvb/dvb-core/Makefile | 6 | ||||
| -rw-r--r-- | linux/drivers/media/dvb/frontends/Kconfig | 83 | ||||
| -rw-r--r-- | linux/drivers/media/dvb/frontends/Makefile | 2 | ||||
| -rw-r--r-- | linux/drivers/media/dvb/frontends/tda10086.c | 740 | ||||
| -rw-r--r-- | linux/drivers/media/dvb/frontends/tda10086.h | 41 | ||||
| -rw-r--r-- | linux/drivers/media/dvb/frontends/tda826x.c | 173 | ||||
| -rw-r--r-- | linux/drivers/media/dvb/frontends/tda826x.h | 40 | ||||
| -rw-r--r-- | linux/drivers/media/dvb/ttpci/Kconfig | 2 | ||||
| -rw-r--r-- | linux/drivers/media/dvb/ttpci/budget-ci.c | 3 | ||||
| -rw-r--r-- | linux/drivers/media/dvb/ttpci/budget.c | 29 | ||||
| -rw-r--r-- | linux/drivers/media/dvb/ttusb-budget/Kconfig | 2 |
11 files changed, 1081 insertions, 40 deletions
diff --git a/linux/drivers/media/dvb/dvb-core/Makefile b/linux/drivers/media/dvb/dvb-core/Makefile index 11054657f..0b5182835 100644 --- a/linux/drivers/media/dvb/dvb-core/Makefile +++ b/linux/drivers/media/dvb/dvb-core/Makefile @@ -2,8 +2,8 @@ # Makefile for the kernel DVB device drivers. # -dvb-core-objs = dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o \ - dvb_ca_en50221.o dvb_frontend.o \ - dvb_net.o dvb_ringbuffer.o dvb_math.o +dvb-core-objs := dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o \ + dvb_ca_en50221.o dvb_frontend.o \ + dvb_net.o dvb_ringbuffer.o dvb_math.o obj-$(CONFIG_DVB_CORE) += dvb-core.o diff --git a/linux/drivers/media/dvb/frontends/Kconfig b/linux/drivers/media/dvb/frontends/Kconfig index 191fa4de7..8b64be1a3 100644 --- a/linux/drivers/media/dvb/frontends/Kconfig +++ b/linux/drivers/media/dvb/frontends/Kconfig @@ -17,49 +17,56 @@ comment "DVB-S (satellite) frontends" config DVB_STV0299 tristate "ST STV0299 based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_CX24110 tristate "Conexant CX24110 based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_CX24123 tristate "Conexant CX24123 based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_TDA8083 tristate "Philips TDA8083 based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_MT312 tristate "Zarlink VP310/MT312 based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_VES1X93 tristate "VLSI VES1893 or VES1993 based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_S5H1420 tristate "Samsung S5H1420 based" - depends on DVB_CORE + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_TDA10086 + tristate "Philips TDA10086 based" + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-S tuner module. Say Y when you want to support this frontend. @@ -69,7 +76,7 @@ comment "DVB-T (terrestrial) frontends" config DVB_SP8870 tristate "Spase sp8870 based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE select FW_LOADER help @@ -82,7 +89,7 @@ config DVB_SP8870 config DVB_SP887X tristate "Spase sp887x based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE select FW_LOADER help @@ -95,28 +102,28 @@ config DVB_SP887X config DVB_CX22700 tristate "Conexant CX22700 based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_CX22702 tristate "Conexant cx22702 demodulator (OFDM)" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_L64781 tristate "LSI L64781" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_TDA1004X tristate "Philips TDA10045H/TDA10046H based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE select FW_LOADER help @@ -130,28 +137,28 @@ config DVB_TDA1004X config DVB_NXT6000 tristate "NxtWave Communications NXT6000 based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_MT352 tristate "Zarlink MT352 based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_ZL10353 tristate "Zarlink ZL10353 based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_DIB3000MB tristate "DiBcom 3000M-B" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-T tuner module. Designed for mobile usage. Say Y when you want @@ -159,7 +166,7 @@ config DVB_DIB3000MB config DVB_DIB3000MC tristate "DiBcom 3000P/M-C" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-T tuner module. Designed for mobile usage. Say Y when you want @@ -170,21 +177,21 @@ comment "DVB-C (cable) frontends" config DVB_VES1820 tristate "VLSI VES1820 based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-C tuner module. Say Y when you want to support this frontend. config DVB_TDA10021 tristate "Philips TDA10021 based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-C tuner module. Say Y when you want to support this frontend. config DVB_STV0297 tristate "ST STV0297 based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help A DVB-C tuner module. Say Y when you want to support this frontend. @@ -194,7 +201,7 @@ comment "ATSC (North American/Korean Terrestrial/Cable DTV) frontends" config DVB_NXT200X tristate "NxtWave Communications NXT2002/NXT2004 based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE select FW_LOADER help @@ -209,7 +216,7 @@ config DVB_NXT200X config DVB_OR51211 tristate "Oren OR51211 based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE select FW_LOADER help @@ -222,7 +229,7 @@ config DVB_OR51211 config DVB_OR51132 tristate "Oren OR51132 based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE select FW_LOADER help @@ -238,7 +245,7 @@ config DVB_OR51132 config DVB_BCM3510 tristate "Broadcom BCM3510" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE select FW_LOADER help @@ -247,32 +254,42 @@ config DVB_BCM3510 config DVB_LGDT330X tristate "LG Electronics LGDT3302/LGDT3303 based" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want to support this frontend. +comment "Tuners/PLL support" + depends on DVB_CORE + +config DVB_TDA826X + tristate "Philips TDA826X silicon tuner" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S silicon tuner module. Say Y when you want to support this tuner. + +config DVB_TUNER_MT2060 + tristate "Microtune MT2060 silicon IF tuner" + help + A driver for the silicon IF tuner MT2060 from Microtune. + comment "Miscellaneous devices" depends on DVB_CORE config DVB_LNBP21 tristate "LNBP21 SEC controller" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help An SEC control chip. config DVB_ISL6421 tristate "ISL6421 SEC controller" - depends on DVB_CORE + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE help An SEC control chip. -config DVB_TUNER_MT2060 - tristate "Microtune MT2060 silicon IF tuner" - help - A driver for the silicon IF tuner MT2060 from Microtune. - endmenu diff --git a/linux/drivers/media/dvb/frontends/Makefile b/linux/drivers/media/dvb/frontends/Makefile index a7fbd0fab..4d0c05115 100644 --- a/linux/drivers/media/dvb/frontends/Makefile +++ b/linux/drivers/media/dvb/frontends/Makefile @@ -33,4 +33,6 @@ obj-$(CONFIG_DVB_LGDT330X) += lgdt330x.o obj-$(CONFIG_DVB_CX24123) += cx24123.o obj-$(CONFIG_DVB_LNBP21) += lnbp21.o obj-$(CONFIG_DVB_ISL6421) += isl6421.o +obj-$(CONFIG_DVB_TDA10086) += tda10086.o +obj-$(CONFIG_DVB_TDA826X) += tda826x.o obj-$(CONFIG_DVB_TUNER_MT2060) += mt2060.o diff --git a/linux/drivers/media/dvb/frontends/tda10086.c b/linux/drivers/media/dvb/frontends/tda10086.c new file mode 100644 index 000000000..7456b0b99 --- /dev/null +++ b/linux/drivers/media/dvb/frontends/tda10086.c @@ -0,0 +1,740 @@ + /* + Driver for Philips tda10086 DVBS Demodulator + + (c) 2006 Andrew de Quincey + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/jiffies.h> +#include <linux/string.h> +#include <linux/slab.h> + +#include "dvb_frontend.h" +#include "tda10086.h" + +#define SACLK 96000000 + +struct tda10086_state { + struct i2c_adapter* i2c; + const struct tda10086_config* config; + struct dvb_frontend frontend; + + /* private demod data */ + u32 frequency; + u32 symbol_rate; +}; + +static int debug = 0; +#define dprintk(args...) \ + do { \ + if (debug) printk(KERN_DEBUG "tda10086: " args); \ + } while (0) + +static int tda10086_write_byte(struct tda10086_state *state, int reg, int data) +{ + int ret; + u8 b0[] = { reg, data }; + struct i2c_msg msg = { .flags = 0, .buf = b0, .len = 2 }; + + msg.addr = state->config->demod_address; + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n", + __FUNCTION__, reg, data, ret); + + return (ret != 1) ? ret : 0; +} + +static int tda10086_read_byte(struct tda10086_state *state, int reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = {{ .flags = 0, .buf = b0, .len = 1 }, + { .flags = I2C_M_RD, .buf = b1, .len = 1 }}; + + msg[0].addr = state->config->demod_address; + msg[1].addr = state->config->demod_address; + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) { + dprintk("%s: error reg=0x%x, ret=%i\n", __FUNCTION__, reg, + ret); + return ret; + } + + return b1[0]; +} + +static int tda10086_write_mask(struct tda10086_state *state, int reg, int mask, int data) +{ + int val; + + // read a byte and check + val = tda10086_read_byte(state, reg); + if (val < 0) + return val; + + // mask if off + val = val & ~mask; + val |= data & 0xff; + + // write it out again + return tda10086_write_byte(state, reg, val); +} + +static int tda10086_init(struct dvb_frontend* fe) +{ + struct tda10086_state* state = fe->demodulator_priv; + + dprintk ("%s\n", __FUNCTION__); + + // reset + tda10086_write_byte(state, 0x00, 0x00); + msleep(10); + + // misc setup + tda10086_write_byte(state, 0x01, 0x94); + tda10086_write_byte(state, 0x02, 0x35); // NOTE: TT drivers appear to disable CSWP + tda10086_write_byte(state, 0x03, 0x64); + tda10086_write_byte(state, 0x04, 0x43); + tda10086_write_byte(state, 0x0c, 0x0c); + tda10086_write_byte(state, 0x1b, 0xb0); // noise threshold + tda10086_write_byte(state, 0x20, 0x89); // misc + tda10086_write_byte(state, 0x30, 0x04); // acquisition period length + tda10086_write_byte(state, 0x32, 0x00); // irq off + tda10086_write_byte(state, 0x31, 0x56); // setup AFC + + // setup PLL (assumes 16Mhz XIN) + tda10086_write_byte(state, 0x55, 0x2c); // misc PLL setup + tda10086_write_byte(state, 0x3a, 0x0b); // M=12 + tda10086_write_byte(state, 0x3b, 0x01); // P=2 + tda10086_write_mask(state, 0x55, 0x20, 0x00); // powerup PLL + + // setup TS interface + tda10086_write_byte(state, 0x11, 0x81); + tda10086_write_byte(state, 0x12, 0x81); + tda10086_write_byte(state, 0x19, 0x40); // parallel mode A + MSBFIRST + tda10086_write_byte(state, 0x56, 0x80); // powerdown WPLL - unused in the mode we use + tda10086_write_byte(state, 0x57, 0x08); // bypass WPLL - unused in the mode we use + tda10086_write_byte(state, 0x10, 0x2a); + + // setup ADC + tda10086_write_byte(state, 0x58, 0x61); // ADC setup + tda10086_write_mask(state, 0x58, 0x01, 0x00); // powerup ADC + + // setup AGC + tda10086_write_byte(state, 0x05, 0x0B); + tda10086_write_byte(state, 0x37, 0x63); + tda10086_write_byte(state, 0x3f, 0x03); // NOTE: flydvb uses 0x0a and varies it + tda10086_write_byte(state, 0x40, 0x64); + tda10086_write_byte(state, 0x41, 0x4f); + tda10086_write_byte(state, 0x42, 0x43); + + // setup viterbi + tda10086_write_byte(state, 0x1a, 0x11); // VBER 10^6, DVB, QPSK + + // setup carrier recovery + tda10086_write_byte(state, 0x3d, 0x80); + + // setup SEC + tda10086_write_byte(state, 0x36, 0x00); // all SEC off + tda10086_write_byte(state, 0x34, (((1<<19) * (22000/1000)) / (SACLK/1000))); // } tone frequency + tda10086_write_byte(state, 0x35, (((1<<19) * (22000/1000)) / (SACLK/1000)) >> 8); // } + + return 0; +} + +static void tda10086_diseqc_wait(struct tda10086_state *state) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(200); + while (!(tda10086_read_byte(state, 0x50) & 0x01)) { + if(time_after(jiffies, timeout)) { + printk("%s: diseqc queue not ready, command may be lost.\n", __FUNCTION__); + break; + } + msleep(10); + } +} + +static int tda10086_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +{ + struct tda10086_state* state = fe->demodulator_priv; + + dprintk ("%s\n", __FUNCTION__); + + switch(tone) { + case SEC_TONE_OFF: + tda10086_write_byte(state, 0x36, 0x00); + break; + + case SEC_TONE_ON: + tda10086_write_byte(state, 0x36, 0x01); + break; + } + + return 0; +} + +static int tda10086_send_master_cmd (struct dvb_frontend* fe, + struct dvb_diseqc_master_cmd* cmd) +{ + struct tda10086_state* state = fe->demodulator_priv; + int i; + u8 oldval; + + dprintk ("%s\n", __FUNCTION__); + + if (cmd->msg_len > 6) + return -EINVAL; + oldval = tda10086_read_byte(state, 0x36); + + for(i=0; i< cmd->msg_len; i++) { + tda10086_write_byte(state, 0x48+i, cmd->msg[i]); + } + tda10086_write_byte(state, 0x36, 0x08 | ((cmd->msg_len + 1) << 4)); + + tda10086_diseqc_wait(state); + + tda10086_write_byte(state, 0x36, oldval); + + return 0; +} + +static int tda10086_send_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) +{ + struct tda10086_state* state = fe->demodulator_priv; + u8 oldval = tda10086_read_byte(state, 0x36); + + dprintk ("%s\n", __FUNCTION__); + + switch(minicmd) { + case SEC_MINI_A: + tda10086_write_byte(state, 0x36, 0x04); + break; + + case SEC_MINI_B: + tda10086_write_byte(state, 0x36, 0x06); + break; + } + + tda10086_diseqc_wait(state); + + tda10086_write_byte(state, 0x36, oldval); + + return 0; +} + +static int tda10086_set_inversion(struct tda10086_state *state, + struct dvb_frontend_parameters *fe_params) +{ + u8 invval = 0x80; + + dprintk ("%s %i %i\n", __FUNCTION__, fe_params->inversion, state->config->invert); + + switch(fe_params->inversion) { + case INVERSION_OFF: + if (state->config->invert) + invval = 0x40; + break; + case INVERSION_ON: + if (!state->config->invert) + invval = 0x40; + break; + case INVERSION_AUTO: + invval = 0x00; + break; + } + tda10086_write_mask(state, 0x0c, 0xc0, invval); + + return 0; +} + +static int tda10086_set_symbol_rate(struct tda10086_state *state, + struct dvb_frontend_parameters *fe_params) +{ + u8 dfn = 0; + u8 afs = 0; + u8 byp = 0; + u8 reg37 = 0x43; + u8 reg42 = 0x43; + u64 big; + u32 tmp; + u32 bdr; + u32 bdri; + u32 symbol_rate = fe_params->u.qpsk.symbol_rate; + + dprintk ("%s %i\n", __FUNCTION__, symbol_rate); + + // setup the decimation and anti-aliasing filters.. + if (symbol_rate < (u32) (SACLK * 0.0137)) { + dfn=4; + afs=1; + } else if (symbol_rate < (u32) (SACLK * 0.0208)) { + dfn=4; + afs=0; + } else if (symbol_rate < (u32) (SACLK * 0.0270)) { + dfn=3; + afs=1; + } else if (symbol_rate < (u32) (SACLK * 0.0416)) { + dfn=3; + afs=0; + } else if (symbol_rate < (u32) (SACLK * 0.0550)) { + dfn=2; + afs=1; + } else if (symbol_rate < (u32) (SACLK * 0.0833)) { + dfn=2; + afs=0; + } else if (symbol_rate < (u32) (SACLK * 0.1100)) { + dfn=1; + afs=1; + } else if (symbol_rate < (u32) (SACLK * 0.1666)) { + dfn=1; + afs=0; + } else if (symbol_rate < (u32) (SACLK * 0.2200)) { + dfn=0; + afs=1; + } else if (symbol_rate < (u32) (SACLK * 0.3333)) { + dfn=0; + afs=0; + } else { + reg37 = 0x63; + reg42 = 0x4f; + byp=1; + } + + // calculate BDR + big = (1ULL<<21) * ((u64) symbol_rate/1000ULL) * (1ULL<<dfn); + big += ((SACLK/1000ULL)-1ULL); + do_div(big, (SACLK/1000ULL)); + bdr = big & 0xfffff; + + // calculate BDRI + tmp = (1<<dfn)*(symbol_rate/1000); + bdri = ((32 * (SACLK/1000)) + (tmp-1)) / tmp; + + tda10086_write_byte(state, 0x21, (afs << 7) | dfn); + tda10086_write_mask(state, 0x20, 0x08, byp << 3); + tda10086_write_byte(state, 0x06, bdr); + tda10086_write_byte(state, 0x07, bdr >> 8); + tda10086_write_byte(state, 0x08, bdr >> 16); + tda10086_write_byte(state, 0x09, bdri); + tda10086_write_byte(state, 0x37, reg37); + tda10086_write_byte(state, 0x42, reg42); + + return 0; +} + +static int tda10086_set_fec(struct tda10086_state *state, + struct dvb_frontend_parameters *fe_params) +{ + u8 fecval; + + dprintk ("%s %i\n", __FUNCTION__, fe_params->u.qpsk.fec_inner); + + switch(fe_params->u.qpsk.fec_inner) { + case FEC_1_2: + fecval = 0x00; + break; + case FEC_2_3: + fecval = 0x01; + break; + case FEC_3_4: + fecval = 0x02; + break; + case FEC_4_5: + fecval = 0x03; + break; + case FEC_5_6: + fecval = 0x04; + break; + case FEC_6_7: + fecval = 0x05; + break; + case FEC_7_8: + fecval = 0x06; + break; + case FEC_8_9: + fecval = 0x07; + break; + case FEC_AUTO: + fecval = 0x08; + break; + default: + return -1; + } + tda10086_write_byte(state, 0x0d, fecval); + + return 0; +} + +static int tda10086_set_frontend(struct dvb_frontend* fe, + struct dvb_frontend_parameters *fe_params) +{ + struct tda10086_state *state = fe->demodulator_priv; + int ret; + u32 freq = 0; + int freqoff; + + dprintk ("%s\n", __FUNCTION__); + + // set params + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe, fe_params); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + if (fe->ops.tuner_ops.get_frequency) + fe->ops.tuner_ops.get_frequency(fe, &freq); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + // calcluate the frequency offset (in *Hz* not kHz) + freqoff = fe_params->frequency - freq; + freqoff = ((1<<16) * freqoff) / (SACLK/1000); + tda10086_write_byte(state, 0x3d, 0x80 | ((freqoff >> 8) & 0x7f)); + tda10086_write_byte(state, 0x3e, freqoff); + + if ((ret = tda10086_set_inversion(state, fe_params)) < 0) + return ret; + if ((ret = tda10086_set_symbol_rate(state, fe_params)) < 0) + return ret; + if ((ret = tda10086_set_fec(state, fe_params)) < 0) + return ret; + + // soft reset + disable TS output until lock + tda10086_write_mask(state, 0x10, 0x40, 0x40); + tda10086_write_mask(state, 0x00, 0x01, 0x00); + + state->symbol_rate = fe_params->u.qpsk.symbol_rate; + state->frequency = fe_params->frequency; + return 0; +} + +static int tda10086_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *fe_params) +{ + struct tda10086_state* state = fe->demodulator_priv; + u8 val; + int tmp; + u64 tmp64; + + dprintk ("%s\n", __FUNCTION__); + + // calculate the updated frequency (note: we convert from Hz->kHz) + tmp64 = tda10086_read_byte(state, 0x52); + tmp64 |= (tda10086_read_byte(state, 0x51) << 8); + if (tmp64 & 0x8000) + tmp64 |= 0xffffffffffff0000ULL; + tmp64 = (tmp64 * (SACLK/1000ULL)); + do_div(tmp64, (1ULL<<15) * (1ULL<<1)); + fe_params->frequency = (int) state->frequency + (int) tmp64; + + // the inversion + val = tda10086_read_byte(state, 0x0c); + if (val & 0x80) { + switch(val & 0x40) { + case 0x00: + fe_params->inversion = INVERSION_OFF; + if (state->config->invert) + fe_params->inversion = INVERSION_ON; + break; + default: + fe_params->inversion = INVERSION_ON; + if (state->config->invert) + fe_params->inversion = INVERSION_OFF; + break; + } + } else { + tda10086_read_byte(state, 0x0f); + switch(val & 0x02) { + case 0x00: + fe_params->inversion = INVERSION_OFF; + if (state->config->invert) + fe_params->inversion = INVERSION_ON; + break; + default: + fe_params->inversion = INVERSION_ON; + if (state->config->invert) + fe_params->inversion = INVERSION_OFF; + break; + } + } + + // calculate the updated symbol rate + tmp = tda10086_read_byte(state, 0x1d); + if (tmp & 0x80) + tmp |= 0xffffff00; + tmp = (tmp * 480 * (1<<1)) / 128; + tmp = ((state->symbol_rate/1000) * tmp) / (1000000/1000); + fe_params->u.qpsk.symbol_rate = state->symbol_rate + tmp; + + // the FEC + val = (tda10086_read_byte(state, 0x0d) & 0x70) >> 4; + switch(val) { + case 0x00: + fe_params->u.qpsk.fec_inner = FEC_1_2; + break; + case 0x01: + fe_params->u.qpsk.fec_inner = FEC_2_3; + break; + case 0x02: + fe_params->u.qpsk.fec_inner = FEC_3_4; + break; + case 0x03: + fe_params->u.qpsk.fec_inner = FEC_4_5; + break; + case 0x04: + fe_params->u.qpsk.fec_inner = FEC_5_6; + break; + case 0x05: + fe_params->u.qpsk.fec_inner = FEC_6_7; + break; + case 0x06: + fe_params->u.qpsk.fec_inner = FEC_7_8; + break; + case 0x07: + fe_params->u.qpsk.fec_inner = FEC_8_9; + break; + } + + return 0; +} + +static int tda10086_read_status(struct dvb_frontend* fe, fe_status_t *fe_status) +{ + struct tda10086_state* state = fe->demodulator_priv; + u8 val; + + dprintk ("%s\n", __FUNCTION__); + + val = tda10086_read_byte(state, 0x0e); + *fe_status = 0; + if (val & 0x01) + *fe_status |= FE_HAS_SIGNAL; + if (val & 0x02) + *fe_status |= FE_HAS_CARRIER; + if (val & 0x04) + *fe_status |= FE_HAS_VITERBI; + if (val & 0x08) + *fe_status |= FE_HAS_SYNC; + if (val & 0x10) + *fe_status |= FE_HAS_LOCK; + + return 0; +} + +static int tda10086_read_signal_strength(struct dvb_frontend* fe, u16 * signal) +{ + struct tda10086_state* state = fe->demodulator_priv; + u8 _str; + + dprintk ("%s\n", __FUNCTION__); + + _str = tda10086_read_byte(state, 0x43); + *signal = (_str << 8) | _str; + + return 0; +} + +static int tda10086_read_snr(struct dvb_frontend* fe, u16 * snr) +{ + struct tda10086_state* state = fe->demodulator_priv; + u8 _snr; + + dprintk ("%s\n", __FUNCTION__); + + _snr = tda10086_read_byte(state, 0x1c); + *snr = (_snr << 8) | _snr; + + return 0; +} + +static int tda10086_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct tda10086_state* state = fe->demodulator_priv; + + dprintk ("%s\n", __FUNCTION__); + + // read it + *ucblocks = tda10086_read_byte(state, 0x18) & 0x7f; + + // reset counter + tda10086_write_byte(state, 0x18, 0x00); + tda10086_write_byte(state, 0x18, 0x80); + + return 0; +} + +static int tda10086_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct tda10086_state* state = fe->demodulator_priv; + + dprintk ("%s\n", __FUNCTION__); + + // read it + *ber = 0; + *ber |= tda10086_read_byte(state, 0x15); + *ber |= tda10086_read_byte(state, 0x16) << 8; + *ber |= (tda10086_read_byte(state, 0x17) & 0xf) << 16; + + return 0; +} + +static int tda10086_sleep(struct dvb_frontend* fe) +{ + struct tda10086_state* state = fe->demodulator_priv; + + dprintk ("%s\n", __FUNCTION__); + + tda10086_write_mask(state, 0x00, 0x08, 0x08); + + return 0; +} + +static int tda10086_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct tda10086_state* state = fe->demodulator_priv; + + dprintk ("%s\n", __FUNCTION__); + + if (enable) { + tda10086_write_mask(state, 0x00, 0x10, 0x10); + } else { + tda10086_write_mask(state, 0x00, 0x10, 0x00); + } + + return 0; +} + +static int tda10086_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) +{ + if (fesettings->parameters.u.qpsk.symbol_rate > 20000000) { + fesettings->min_delay_ms = 50; + fesettings->step_size = 2000; + fesettings->max_drift = 8000; + } else if (fesettings->parameters.u.qpsk.symbol_rate > 12000000) { + fesettings->min_delay_ms = 100; + fesettings->step_size = 1500; + fesettings->max_drift = 9000; + } else if (fesettings->parameters.u.qpsk.symbol_rate > 8000000) { + fesettings->min_delay_ms = 100; + fesettings->step_size = 1000; + fesettings->max_drift = 8000; + } else if (fesettings->parameters.u.qpsk.symbol_rate > 4000000) { + fesettings->min_delay_ms = 100; + fesettings->step_size = 500; + fesettings->max_drift = 7000; + } else if (fesettings->parameters.u.qpsk.symbol_rate > 2000000) { + fesettings->min_delay_ms = 200; + fesettings->step_size = (fesettings->parameters.u.qpsk.symbol_rate / 8000); + fesettings->max_drift = 14 * fesettings->step_size; + } else { + fesettings->min_delay_ms = 200; + fesettings->step_size = (fesettings->parameters.u.qpsk.symbol_rate / 8000); + fesettings->max_drift = 18 * fesettings->step_size; + } + + return 0; +} + +static void tda10086_release(struct dvb_frontend* fe) +{ + struct tda10086_state *state = fe->demodulator_priv; + tda10086_sleep(fe); + kfree(state); +} + +static struct dvb_frontend_ops tda10086_ops = { + + .info = { + .name = "Philips TDA10086 DVB-S", + .type = FE_QPSK, + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 125, /* kHz for QPSK frontends */ + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK + }, + + .release = tda10086_release, + + .init = tda10086_init, + .sleep = tda10086_sleep, + .i2c_gate_ctrl = tda10086_i2c_gate_ctrl, + + .set_frontend = tda10086_set_frontend, + .get_frontend = tda10086_get_frontend, + .get_tune_settings = tda10086_get_tune_settings, + + .read_status = tda10086_read_status, + .read_ber = tda10086_read_ber, + .read_signal_strength = tda10086_read_signal_strength, + .read_snr = tda10086_read_snr, + .read_ucblocks = tda10086_read_ucblocks, + + .diseqc_send_master_cmd = tda10086_send_master_cmd, + .diseqc_send_burst = tda10086_send_burst, + .set_tone = tda10086_set_tone, +}; + +struct dvb_frontend* tda10086_attach(const struct tda10086_config* config, + struct i2c_adapter* i2c) +{ + struct tda10086_state *state; + + dprintk ("%s\n", __FUNCTION__); + + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct tda10086_state), GFP_KERNEL); + if (!state) + return NULL; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + + /* check if the demod is there */ + if (tda10086_read_byte(state, 0x1e) != 0xe1) { + kfree(state); + return NULL; + } + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &tda10086_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; +} + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("Philips TDA10086 DVB-S Demodulator"); +MODULE_AUTHOR("Andrew de Quincey"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(tda10086_attach); diff --git a/linux/drivers/media/dvb/frontends/tda10086.h b/linux/drivers/media/dvb/frontends/tda10086.h new file mode 100644 index 000000000..e8061db11 --- /dev/null +++ b/linux/drivers/media/dvb/frontends/tda10086.h @@ -0,0 +1,41 @@ + /* + Driver for Philips tda10086 DVBS Frontend + + (c) 2006 Andrew de Quincey + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ + +#ifndef TDA10086_H +#define TDA10086_H + +#include <linux/dvb/frontend.h> +#include <linux/firmware.h> + +struct tda10086_config +{ + /* the demodulator's i2c address */ + u8 demod_address; + + /* does the "inversion" need inverted? */ + u8 invert; +}; + +extern struct dvb_frontend* tda10086_attach(const struct tda10086_config* config, + struct i2c_adapter* i2c); + +#endif // TDA10086_H diff --git a/linux/drivers/media/dvb/frontends/tda826x.c b/linux/drivers/media/dvb/frontends/tda826x.c new file mode 100644 index 000000000..7c19b88e9 --- /dev/null +++ b/linux/drivers/media/dvb/frontends/tda826x.c @@ -0,0 +1,173 @@ + /* + Driver for Philips tda8262/tda8263 DVBS Silicon tuners + + (c) 2006 Andrew de Quincey + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ + +#include <linux/module.h> +#include <linux/dvb/frontend.h> +#include <asm/types.h> + +#include "tda826x.h" + +static int debug = 0; +#define dprintk(args...) \ + do { \ + if (debug) printk(KERN_DEBUG "tda826x: " args); \ + } while (0) + +struct tda826x_priv { + /* i2c details */ + int i2c_address; + struct i2c_adapter *i2c; + u8 has_loopthrough:1; + u32 frequency; +}; + +static int tda826x_release(struct dvb_frontend *fe) +{ + if (fe->tuner_priv) + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +static int tda826x_sleep(struct dvb_frontend *fe) +{ + struct tda826x_priv *priv = fe->tuner_priv; + int ret; + u8 buf [] = { 0x00, 0x8d }; + struct i2c_msg msg = { .addr = priv->i2c_address, .flags = 0, .buf = buf, .len = 2 }; + + dprintk("%s:\n", __FUNCTION__); + + if (!priv->has_loopthrough) + buf[1] = 0xad; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if ((ret = i2c_transfer (priv->i2c, &msg, 1)) != 1) { + dprintk("%s: i2c error\n", __FUNCTION__); + } + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + return (ret == 1) ? 0 : ret; +} + +static int tda826x_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + struct tda826x_priv *priv = fe->tuner_priv; + int ret; + u32 div; + u8 buf [11]; + struct i2c_msg msg = { .addr = priv->i2c_address, .flags = 0, .buf = buf, .len = 11 }; + + dprintk("%s:\n", __FUNCTION__); + + div = (params->frequency + (1000-1)) / 1000; + + buf[0] = 0x00; // subaddress + buf[1] = 0x09; // powerdown RSSI + the magic value 1 + if (!priv->has_loopthrough) + buf[1] |= 0x20; // power down loopthrough if not needed + buf[2] = (1<<5) | 0x0b; // 1Mhz + 0.45 VCO + buf[3] = div >> 7; + buf[4] = div << 1; + buf[5] = 0xff; // basedband filter to max + buf[6] = 0xfe; // gains at max + no RF attenuation + buf[7] = 0x83; // charge pumps at high, tests off + buf[8] = 0x80; // recommended value 4 for AMPVCO + disable ports. + buf[9] = 0x1a; // normal caltime + recommended values for SELTH + SELVTL + buf[10] = 0xd4; // recommended value 13 for BBIAS + unknown bit set on + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if ((ret = i2c_transfer (priv->i2c, &msg, 1)) != 1) { + dprintk("%s: i2c error\n", __FUNCTION__); + } + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + priv->frequency = div * 1000; + + return (ret == 1) ? 0 : ret; +} + +static int tda826x_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct tda826x_priv *priv = fe->tuner_priv; + *frequency = priv->frequency; + return 0; +} + +static struct dvb_tuner_ops tda826x_tuner_ops = { + .info = { + .name = "Philips TDA826X", + .frequency_min = 950000, + .frequency_min = 2175000 + }, + .release = tda826x_release, + .sleep = tda826x_sleep, + .set_params = tda826x_set_params, + .get_frequency = tda826x_get_frequency, +}; + +struct dvb_frontend *tda826x_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c, int has_loopthrough) +{ + struct tda826x_priv *priv = NULL; + u8 b1 [] = { 0, 0 }; + struct i2c_msg msg [] = { { .addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 2 } }; + int ret; + + dprintk("%s:\n", __FUNCTION__); + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + ret = i2c_transfer (i2c, msg, 1); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + + if (ret != 2) + return NULL; + if (!(b1[1] & 0x80)) + return NULL; + + priv = kzalloc(sizeof(struct tda826x_priv), GFP_KERNEL); + if (priv == NULL) + return NULL; + + priv->i2c_address = addr; + priv->i2c = i2c; + priv->has_loopthrough = has_loopthrough; + + memcpy(&fe->ops.tuner_ops, &tda826x_tuner_ops, sizeof(struct dvb_tuner_ops)); + + fe->tuner_priv = priv; + + return fe; +} +EXPORT_SYMBOL(tda826x_attach); + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("DVB TDA826x driver"); +MODULE_AUTHOR("Andrew de Quincey"); +MODULE_LICENSE("GPL"); diff --git a/linux/drivers/media/dvb/frontends/tda826x.h b/linux/drivers/media/dvb/frontends/tda826x.h new file mode 100644 index 000000000..330760763 --- /dev/null +++ b/linux/drivers/media/dvb/frontends/tda826x.h @@ -0,0 +1,40 @@ + /* + Driver for Philips tda8262/tda8263 DVBS Silicon tuners + + (c) 2006 Andrew de Quincey + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ + +#ifndef __DVB_TDA826X_H__ +#define __DVB_TDA826X_H__ + +#include <linux/i2c.h> +#include "dvb_frontend.h" + +/** + * Attach a tda826x tuner to the supplied frontend structure. + * + * @param fe Frontend to attach to. + * @param addr i2c address of the tuner. + * @param i2c i2c adapter to use. + * @param has_loopthrough Set to 1 if the card has a loopthrough RF connector. + * @return FE pointer on success, NULL on failure. + */ +extern struct dvb_frontend *tda826x_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c, int has_loopthrough); + +#endif diff --git a/linux/drivers/media/dvb/ttpci/Kconfig b/linux/drivers/media/dvb/ttpci/Kconfig index 0f01b9ff1..cca27777e 100644 --- a/linux/drivers/media/dvb/ttpci/Kconfig +++ b/linux/drivers/media/dvb/ttpci/Kconfig @@ -68,6 +68,8 @@ config DVB_BUDGET select DVB_TDA8083 if !DVB_FE_CUSTOMISE select DVB_TDA10021 if !DVB_FE_CUSTOMISE select DVB_S5H1420 if !DVB_FE_CUSTOMISE + select DVB_TDA10086 if !DVB_FE_CUSTOMISE + select DVB_TDA826X if !DVB_FE_CUSTOMISE select DVB_LNBP21 if !DVB_FE_CUSTOMISE help Support for simple SAA7146 based DVB cards diff --git a/linux/drivers/media/dvb/ttpci/budget-ci.c b/linux/drivers/media/dvb/ttpci/budget-ci.c index e440fa100..2c4089cab 100644 --- a/linux/drivers/media/dvb/ttpci/budget-ci.c +++ b/linux/drivers/media/dvb/ttpci/budget-ci.c @@ -1046,8 +1046,7 @@ static void frontend_init(struct budget_ci *budget_ci) budget_ci->budget.dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; if (dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, LNBP21_LLC, 0) == NULL) { printk("%s: No LNBP21 found!\n", __FUNCTION__); - if (budget_ci->budget.dvb_frontend->ops.release) - budget_ci->budget.dvb_frontend->ops.release(budget_ci->budget.dvb_frontend); + dvb_frontend_detach(budget_ci->budget.dvb_frontend); budget_ci->budget.dvb_frontend = NULL; } } diff --git a/linux/drivers/media/dvb/ttpci/budget.c b/linux/drivers/media/dvb/ttpci/budget.c index e846b9620..886eb6a27 100644 --- a/linux/drivers/media/dvb/ttpci/budget.c +++ b/linux/drivers/media/dvb/ttpci/budget.c @@ -41,6 +41,8 @@ #include "l64781.h" #include "tda8083.h" #include "s5h1420.h" +#include "tda10086.h" +#include "tda826x.h" #include "lnbp21.h" #include "bsru6.h" @@ -342,6 +344,11 @@ static struct s5h1420_config s5h1420_config = { .invert = 1, }; +static struct tda10086_config tda10086_config = { + .demod_address = 0x0e, + .invert = 0, +}; + static u8 read_pwm(struct budget* budget) { u8 b = 0xff; @@ -420,7 +427,25 @@ static void frontend_init(struct budget *budget) budget->dvb_frontend = dvb_attach(s5h1420_attach, &s5h1420_config, &budget->i2c_adap); if (budget->dvb_frontend) { budget->dvb_frontend->ops.tuner_ops.set_params = s5h1420_tuner_set_params; - if (lnbp21_attach(budget->dvb_frontend, &budget->i2c_adap, 0, 0) == NULL) { + if (dvb_attach(lnbp21_attach, budget->dvb_frontend, &budget->i2c_adap, 0, 0) == NULL) { + printk("%s: No LNBP21 found!\n", __FUNCTION__); + goto error_out; + } + break; + } + + case 0x1018: // TT Budget-S-1401 (philips tda10086/philips tda8262) + // gpio2 is connected to CLB - reset it + leave it high + saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO); + msleep(1); + saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI); + msleep(1); + + budget->dvb_frontend = dvb_attach(tda10086_attach, &tda10086_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + if (dvb_attach(tda826x_attach, budget->dvb_frontend, 0x60, &budget->i2c_adap, 0) == NULL) + printk("%s: No tda826x found!\n", __FUNCTION__); + if (dvb_attach(lnbp21_attach, budget->dvb_frontend, &budget->i2c_adap, 0, 0) == NULL) { printk("%s: No LNBP21 found!\n", __FUNCTION__); goto error_out; } @@ -499,6 +524,7 @@ MAKE_BUDGET_INFO(ttbs, "TT-Budget/WinTV-NOVA-S PCI", BUDGET_TT); MAKE_BUDGET_INFO(ttbc, "TT-Budget/WinTV-NOVA-C PCI", BUDGET_TT); MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT); MAKE_BUDGET_INFO(satel, "SATELCO Multimedia PCI", BUDGET_TT_HW_DISEQC); +MAKE_BUDGET_INFO(ttbs1401, "TT-Budget-S-1401 PCI", BUDGET_TT); MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY); MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY); @@ -508,6 +534,7 @@ static struct pci_device_id pci_tbl[] = { MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005), MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013), MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016), + MAKE_EXTENSION_PCI(ttbs1401, 0x13c2, 0x1018), MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60), MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61), { diff --git a/linux/drivers/media/dvb/ttusb-budget/Kconfig b/linux/drivers/media/dvb/ttusb-budget/Kconfig index ce0fb8f54..f546bccdb 100644 --- a/linux/drivers/media/dvb/ttusb-budget/Kconfig +++ b/linux/drivers/media/dvb/ttusb-budget/Kconfig @@ -1,6 +1,6 @@ config DVB_TTUSB_BUDGET tristate "Technotrend/Hauppauge Nova-USB devices" - depends on DVB_CORE && USB + depends on DVB_CORE && USB && I2C select DVB_CX22700 if !DVB_FE_CUSTOMISE select DVB_TDA1004X if !DVB_FE_CUSTOMISE select DVB_VES1820 if !DVB_FE_CUSTOMISE |