diff options
Diffstat (limited to 'linux/drivers/media/dvb')
32 files changed, 1325 insertions, 261 deletions
diff --git a/linux/drivers/media/dvb/b2c2/flexcop-usb.c b/linux/drivers/media/dvb/b2c2/flexcop-usb.c index 683217b0f..d523dd5bf 100644 --- a/linux/drivers/media/dvb/b2c2/flexcop-usb.c +++ b/linux/drivers/media/dvb/b2c2/flexcop-usb.c @@ -383,7 +383,7 @@ static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb) static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb) { - u16 frame_size = fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize; + u16 frame_size = le16_to_cpu(fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize); int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret; int buffer_offset = 0; diff --git a/linux/drivers/media/dvb/cinergyT2/cinergyT2.c b/linux/drivers/media/dvb/cinergyT2/cinergyT2.c index 728197340..651df056e 100644 --- a/linux/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/linux/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -95,22 +95,22 @@ enum cinergyt2_ep1_cmd { struct dvbt_set_parameters_msg { uint8_t cmd; - uint32_t freq; + __le32 freq; uint8_t bandwidth; - uint16_t tps; + __le16 tps; uint8_t flags; } __attribute__((packed)); struct dvbt_get_status_msg { - uint32_t freq; + __le32 freq; uint8_t bandwidth; - uint16_t tps; + __le16 tps; uint8_t flags; - uint16_t gain; + __le16 gain; uint8_t snr; - uint32_t viterbi_error_rate; - uint32_t rs_error_rate; - uint32_t uncorrected_block_count; + __le32 viterbi_error_rate; + __le32 rs_error_rate; + __le32 uncorrected_block_count; uint8_t lock_bits; uint8_t prev_lock_bits; } __attribute__((packed)); @@ -158,6 +158,7 @@ struct cinergyt2 { wait_queue_head_t poll_wq; int pending_fe_events; int disconnect_pending; + unsigned int uncorrected_block_count; atomic_t inuse; void *streambuf; @@ -173,7 +174,7 @@ struct cinergyt2 { struct delayed_work rc_query_work; #endif int rc_input_event; - u32 rc_last_code; + __le32 rc_last_code; unsigned long last_event_jiffies; #endif }; @@ -186,7 +187,7 @@ enum { struct cinergyt2_rc_event { char type; - uint32_t value; + __le32 value; } __attribute__((packed)); static const uint32_t rc_keys[] = { @@ -653,8 +654,11 @@ static int cinergyt2_ioctl (struct inode *inode, struct file *file, { uint32_t unc_count; - unc_count = stat->uncorrected_block_count; - stat->uncorrected_block_count = 0; + if (mutex_lock_interruptible(&cinergyt2->sem)) + return -ERESTARTSYS; + unc_count = cinergyt2->uncorrected_block_count; + cinergyt2->uncorrected_block_count = 0; + mutex_unlock(&cinergyt2->sem); /* UNC are already converted to host byte order... */ return put_user(unc_count,(__u32 __user *) arg); @@ -811,7 +815,7 @@ static void cinergyt2_query_rc (struct work_struct *work) input_sync(cinergyt2->rc_input_dev); cinergyt2->rc_input_event = KEY_MAX; } - cinergyt2->rc_last_code = ~0; + cinergyt2->rc_last_code = cpu_to_le32(~0); } goto out; } @@ -822,7 +826,7 @@ static void cinergyt2_query_rc (struct work_struct *work) n, le32_to_cpu(rc_events[n].value), rc_events[n].type); if (rc_events[n].type == CINERGYT2_RC_EVENT_TYPE_NEC && - rc_events[n].value == ~0) { + rc_events[n].value == cpu_to_le32(~0)) { /* keyrepeat bit -> just repeat last rc_input_event */ } else { cinergyt2->rc_input_event = KEY_MAX; @@ -837,7 +841,7 @@ static void cinergyt2_query_rc (struct work_struct *work) if (cinergyt2->rc_input_event != KEY_MAX) { if (rc_events[n].value == cinergyt2->rc_last_code && - cinergyt2->rc_last_code != ~0) { + cinergyt2->rc_last_code != cpu_to_le32(~0)) { /* emit a key-up so the double event is recognized */ dprintk(1, "rc_input_event=%d UP\n", cinergyt2->rc_input_event); input_report_key(cinergyt2->rc_input_dev, @@ -871,7 +875,7 @@ static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) usb_make_path(cinergyt2->udev, cinergyt2->phys, sizeof(cinergyt2->phys)); strlcat(cinergyt2->phys, "/input0", sizeof(cinergyt2->phys)); cinergyt2->rc_input_event = KEY_MAX; - cinergyt2->rc_last_code = ~0; + cinergyt2->rc_last_code = cpu_to_le32(~0); #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) INIT_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc, cinergyt2); #else @@ -886,8 +890,8 @@ static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) input_dev->keycodesize = 0; input_dev->keycodemax = 0; input_dev->id.bustype = BUS_USB; - input_dev->id.vendor = cinergyt2->udev->descriptor.idVendor; - input_dev->id.product = cinergyt2->udev->descriptor.idProduct; + input_dev->id.vendor = le16_to_cpu(cinergyt2->udev->descriptor.idVendor); + input_dev->id.product = le16_to_cpu(cinergyt2->udev->descriptor.idProduct); input_dev->id.version = 1; #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22) input_dev->dev.parent = &cinergyt2->udev->dev; @@ -951,18 +955,16 @@ static void cinergyt2_query (struct work_struct *work) char cmd [] = { CINERGYT2_EP1_GET_TUNER_STATUS }; struct dvbt_get_status_msg *s = &cinergyt2->status; uint8_t lock_bits; - uint32_t unc; if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem)) return; - unc = s->uncorrected_block_count; lock_bits = s->lock_bits; cinergyt2_command(cinergyt2, cmd, sizeof(cmd), (char *) s, sizeof(*s)); - unc += le32_to_cpu(s->uncorrected_block_count); - s->uncorrected_block_count = unc; + cinergyt2->uncorrected_block_count += + le32_to_cpu(s->uncorrected_block_count); if (lock_bits != s->lock_bits) { wake_up_interruptible(&cinergyt2->poll_wq); diff --git a/linux/drivers/media/dvb/dvb-core/dvb_net.c b/linux/drivers/media/dvb/dvb-core/dvb_net.c index 04c9e00b0..04b207fd7 100644 --- a/linux/drivers/media/dvb/dvb-core/dvb_net.c +++ b/linux/drivers/media/dvb/dvb-core/dvb_net.c @@ -177,7 +177,7 @@ struct dvb_net_priv { * stolen from eth.c out of the linux kernel, hacked for dvb-device * by Michael Holzt <kju@debian.org> */ -static unsigned short dvb_net_eth_type_trans(struct sk_buff *skb, +static __be16 dvb_net_eth_type_trans(struct sk_buff *skb, struct net_device *dev) { struct ethhdr *eth; @@ -290,10 +290,10 @@ static int handle_one_ule_extension( struct dvb_net_priv *p ) if(ext_len >= 0) { p->ule_next_hdr += ext_len; if (!p->ule_bridged) { - p->ule_sndu_type = ntohs(*(unsigned short *)p->ule_next_hdr); + p->ule_sndu_type = ntohs(*(__be16 *)p->ule_next_hdr); p->ule_next_hdr += 2; } else { - p->ule_sndu_type = ntohs(*(unsigned short *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN))); + p->ule_sndu_type = ntohs(*(__be16 *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN))); /* This assures the extension handling loop will terminate. */ } } @@ -307,7 +307,7 @@ static int handle_one_ule_extension( struct dvb_net_priv *p ) if (ule_optional_ext_handlers[htype]) (void)ule_optional_ext_handlers[htype]( p ); p->ule_next_hdr += ext_len; - p->ule_sndu_type = ntohs( *(unsigned short *)(p->ule_next_hdr-2) ); + p->ule_sndu_type = ntohs( *(__be16 *)(p->ule_next_hdr-2) ); /* * note: the length of the next header type is included in the * length of THIS optional extension header @@ -607,8 +607,8 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) /* Check for complete payload. */ if (priv->ule_sndu_remain <= 0) { /* Check CRC32, we've got it in our skb already. */ - unsigned short ulen = htons(priv->ule_sndu_len); - unsigned short utype = htons(priv->ule_sndu_type); + __be16 ulen = htons(priv->ule_sndu_len); + __be16 utype = htons(priv->ule_sndu_type); #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22) const u8 *tail; #endif diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig index cf4584e48..cae574fa7 100644 --- a/linux/drivers/media/dvb/dvb-usb/Kconfig +++ b/linux/drivers/media/dvb/dvb-usb/Kconfig @@ -1,6 +1,6 @@ config DVB_USB tristate "Support for various USB DVB devices" - depends on DVB_CORE && USB && I2C + depends on DVB_CORE && USB && I2C && INPUT depends on HOTPLUG # due to FW_LOADER select FW_LOADER help @@ -241,3 +241,13 @@ config DVB_USB_AF9005_REMOTE Say Y here to support the default remote control decoding for the Afatech AF9005 based receiver. +config DVB_USB_ANYSEE + tristate "Anysee DVB-T/C USB2.0 support" + depends on DVB_USB + select DVB_PLL if !DVB_FE_CUSTOMISE + select DVB_MT352 if !DVB_FE_CUSTOMISE + select DVB_ZL10353 if !DVB_FE_CUSTOMISE + select DVB_TDA10023 if !DVB_FE_CUSTOMISE + help + Say Y here to support the Anysee E30, Anysee E30 Plus or + Anysee E30 C Plus DVB USB2.0 receiver. diff --git a/linux/drivers/media/dvb/dvb-usb/Makefile b/linux/drivers/media/dvb/dvb-usb/Makefile index c6511a6c0..44c11e45e 100644 --- a/linux/drivers/media/dvb/dvb-usb/Makefile +++ b/linux/drivers/media/dvb/dvb-usb/Makefile @@ -61,6 +61,9 @@ obj-$(CONFIG_DVB_USB_AF9005) += dvb-usb-af9005.o dvb-usb-af9005-remote-objs = af9005-remote.o obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o +dvb-usb-anysee-objs = anysee.o +obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/linux/drivers/media/dvb/dvb-usb/anysee.c b/linux/drivers/media/dvb/dvb-usb/anysee.c new file mode 100644 index 000000000..224919559 --- /dev/null +++ b/linux/drivers/media/dvb/dvb-usb/anysee.c @@ -0,0 +1,556 @@ +/* + * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO: + * - add smart card reader support for Conditional Access (CA) + * + * Card reader in Anysee is nothing more than ISO 7816 card reader. + * There is no hardware CAM in any Anysee device sold. + * In my understanding it should be implemented by making own module + * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This + * module registers serial interface that can be used to communicate + * with any ISO 7816 smart card. + * + * Any help according to implement serial smart card reader support + * is highly welcome! + */ + +#include "anysee.h" +#include "tda1002x.h" +#include "mt352.h" +#include "mt352_priv.h" +#include "zl10353.h" + +/* debug */ +static int dvb_usb_anysee_debug; +module_param_named(debug, dvb_usb_anysee_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct mutex anysee_usb_mutex; + +static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, + u8 *rbuf, u8 rlen) +{ + struct anysee_state *state = d->priv; + int act_len, ret; + u8 buf[64]; + + if (slen > sizeof(buf)) + slen = sizeof(buf); + memcpy(&buf[0], sbuf, slen); + buf[60] = state->seq++; + + if (mutex_lock_interruptible(&anysee_usb_mutex) < 0) + return -EAGAIN; + + /* We need receive one message more after dvb_usb_generic_rw due + to weird transaction flow, which is 1 x send + 2 x receive. */ + ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0); + + if (!ret) { + /* receive 2nd answer */ + ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, + d->props.generic_bulk_ctrl_endpoint), buf, sizeof(buf), + &act_len, 2000); + if (ret) + err("%s: recv bulk message failed: %d", __func__, ret); + else { + deb_xfer("<<< "); + debug_dump(buf, act_len, deb_xfer); + } + } + + /* read request, copy returned data to return buf */ + if (!ret && rbuf && rlen) + memcpy(rbuf, buf, rlen); + + mutex_unlock(&anysee_usb_mutex); + + return ret; +} + +static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val) +{ + u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01}; + int ret; + ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1); + deb_info("%s: reg:%04x val:%02x\n", __func__, reg, *val); + return ret; +} + +static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val) +{ + u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val}; + deb_info("%s: reg:%04x val:%02x\n", __func__, reg, val); + return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); +} + +static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id) +{ + u8 buf[] = {CMD_GET_HW_INFO}; + return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3); +} + +static int anysee_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00}; + deb_info("%s: onoff:%02x\n", __func__, onoff); + return anysee_ctrl_msg(adap->dev, buf, sizeof(buf), NULL, 0); +} + +static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval) +{ + u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval}; + deb_info("%s: state:%02x interval:%02x\n", __func__, mode, interval); + return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); +} + +static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff) +{ + u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff}; + deb_info("%s: onoff:%02x\n", __func__, onoff); + return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); +} + +static int anysee_init(struct dvb_usb_device *d) +{ + int ret; + /* LED light */ + ret = anysee_led_ctrl(d, 0x01, 0x03); + if (ret) + return ret; + + /* enable IR */ + ret = anysee_ir_ctrl(d, 1); + if (ret) + return ret; + + return 0; +} + +/* I2C */ +static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int ret, inc, i = 0; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + while (i < num) { + if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { + u8 buf[6]; + buf[0] = CMD_I2C_READ; + buf[1] = msg[i].addr + 1; + buf[2] = msg[i].buf[0]; + buf[3] = 0x00; + buf[4] = 0x00; + buf[5] = 0x01; + ret = anysee_ctrl_msg(d, buf, sizeof(buf), msg[i+1].buf, + msg[i+1].len); + inc = 2; + } else { + u8 buf[4+msg[i].len]; + buf[0] = CMD_I2C_WRITE; + buf[1] = msg[i].addr; + buf[2] = msg[i].len; + buf[3] = 0x01; + memcpy(&buf[4], msg[i].buf, msg[i].len); + ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); + inc = 1; + } + if (ret) + return ret; + + i += inc; + } + + mutex_unlock(&d->i2c_mutex); + + return i; +} + +static u32 anysee_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm anysee_i2c_algo = { + .master_xfer = anysee_master_xfer, + .functionality = anysee_i2c_func, +}; + +static int anysee_mt352_demod_init(struct dvb_frontend *fe) +{ + static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 }; + static u8 reset [] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 }; + static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; + static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + + return 0; +} + +/* Callbacks for DVB USB */ +static struct tda10023_config anysee_tda10023_config = { + .demod_address = 0x1a, + .invert = 0, + .xtal = 16000000, + .pll_m = 11, + .pll_p = 3, + .pll_n = 1, + .output_mode = TDA10023_OUTPUT_MODE_PARALLEL_C, + .deltaf = 0xfeeb, +}; + +static struct mt352_config anysee_mt352_config = { + .demod_address = 0x1e, + .demod_init = anysee_mt352_demod_init, +}; + +static struct zl10353_config anysee_zl10353_config = { + .demod_address = 0x1e, + .parallel_ts = 1, +}; + +static int anysee_frontend_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct anysee_state *state = adap->dev->priv; + u8 hw_info[3]; + u8 io_d; /* IO port D */ + + /* check which hardware we have + We must do this call two times to get reliable values (hw bug). */ + ret = anysee_get_hw_info(adap->dev, hw_info); + if (ret) + return ret; + ret = anysee_get_hw_info(adap->dev, hw_info); + if (ret) + return ret; + + /* Meaning of these info bytes are guessed. */ + info("firmware version:%d.%d.%d hardware id:%d", + 0, hw_info[1], hw_info[2], hw_info[0]); + + ret = anysee_read_reg(adap->dev, 0xb0, &io_d); /* IO port D */ + if (ret) + return ret; + deb_info("%s: IO port D:%02x\n", __func__, io_d); + + /* Select demod using trial and error method. */ + + /* Try to attach demodulator in following order: + model demod hw firmware + 1. E30 MT352 02 0.2.1 + 2. E30 ZL10353 02 0.2.1 + 3. E30 Plus ZL10353 06 0.1.0 + 4. E30C Plus TDA10023 0a 0.1.0 rev 0.2 + 4. E30C Plus TDA10023 0f 0.1.2 rev 0.4 + */ + + /* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */ + adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_THOMSON_DTT7579; + return 0; + } + + /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */ + adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_THOMSON_DTT7579; + return 0; + } + + /* connect demod on IO port D for TDA10023 & ZL10353 */ + ret = anysee_write_reg(adap->dev, 0xb0, 0x25); + if (ret) + return ret; + + /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */ + adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_THOMSON_DTT7579; + return 0; + } + + /* IO port E - E30C rev 0.4 board requires this */ + ret = anysee_write_reg(adap->dev, 0xb1, 0xa7); + if (ret) + return ret; + + /* Philips TDA10023 DVB-C demod */ + adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config, + &adap->dev->i2c_adap, 0x48); + if (adap->fe != NULL) { + state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A; + return 0; + } + + /* return IO port D to init value for safe */ + ret = anysee_write_reg(adap->dev, 0xb0, io_d); + if (ret) + return ret; + + err("Unkown Anysee version: %02x %02x %02x. "\ + "Please report the <linux-dvb@linuxtv.org>.", + hw_info[0], hw_info[1], hw_info[2]); + + return -ENODEV; +} + +static int anysee_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct anysee_state *state = adap->dev->priv; + deb_info("%s: \n", __func__); + + switch (state->tuner) { + case DVB_PLL_THOMSON_DTT7579: + /* Thomson dtt7579 (not sure) PLL inside of: + Samsung DNOS404ZH102A NIM + Samsung DNOS404ZH103A NIM */ + dvb_attach(dvb_pll_attach, adap->fe, 0x61, + NULL, DVB_PLL_THOMSON_DTT7579); + break; + case DVB_PLL_SAMSUNG_DTOS403IH102A: + /* Unknown PLL inside of Samsung DTOS403IH102A tuner module */ + dvb_attach(dvb_pll_attach, adap->fe, 0xc0, + &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A); + break; + } + + return 0; +} + +static int anysee_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 buf[] = {CMD_GET_IR_CODE}; + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + u8 ircode[2]; + int i, ret; + + ret = anysee_ctrl_msg(d, buf, sizeof(buf), &ircode[0], 2); + if (ret) + return ret; + + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + for (i = 0; i < d->props.rc_key_map_size; i++) { + if (keymap[i].custom == ircode[0] && + keymap[i].data == ircode[1]) { + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + return 0; + } + } + return 0; +} + +static struct dvb_usb_rc_key anysee_rc_keys[] = { + { 0x01, 0x00, KEY_0 }, + { 0x01, 0x01, KEY_1 }, + { 0x01, 0x02, KEY_2 }, + { 0x01, 0x03, KEY_3 }, + { 0x01, 0x04, KEY_4 }, + { 0x01, 0x05, KEY_5 }, + { 0x01, 0x06, KEY_6 }, + { 0x01, 0x07, KEY_7 }, + { 0x01, 0x08, KEY_8 }, + { 0x01, 0x09, KEY_9 }, + { 0x01, 0x0a, KEY_POWER }, + { 0x01, 0x0b, KEY_DOCUMENTS }, /* * */ + { 0x01, 0x19, KEY_FAVORITES }, + { 0x01, 0x20, KEY_SLEEP }, + { 0x01, 0x21, KEY_MODE }, /* 4:3 / 16:9 select */ + { 0x01, 0x22, KEY_ZOOM }, + { 0x01, 0x47, KEY_TEXT }, + { 0x01, 0x16, KEY_TV }, /* TV / radio select */ + { 0x01, 0x1e, KEY_LANGUAGE }, /* Second Audio Program */ + { 0x01, 0x1a, KEY_SUBTITLE }, + { 0x01, 0x1b, KEY_CAMERA }, /* screenshot */ + { 0x01, 0x42, KEY_MUTE }, + { 0x01, 0x0e, KEY_MENU }, + { 0x01, 0x0f, KEY_EPG }, + { 0x01, 0x17, KEY_INFO }, + { 0x01, 0x10, KEY_EXIT }, + { 0x01, 0x13, KEY_VOLUMEUP }, + { 0x01, 0x12, KEY_VOLUMEDOWN }, + { 0x01, 0x11, KEY_CHANNELUP }, + { 0x01, 0x14, KEY_CHANNELDOWN }, + { 0x01, 0x15, KEY_OK }, + { 0x01, 0x1d, KEY_RED }, + { 0x01, 0x1f, KEY_GREEN }, + { 0x01, 0x1c, KEY_YELLOW }, + { 0x01, 0x44, KEY_BLUE }, + { 0x01, 0x0c, KEY_SHUFFLE }, /* snapshot */ + { 0x01, 0x48, KEY_STOP }, + { 0x01, 0x50, KEY_PLAY }, + { 0x01, 0x51, KEY_PAUSE }, + { 0x01, 0x49, KEY_RECORD }, + { 0x01, 0x18, KEY_PREVIOUS }, /* |<< */ + { 0x01, 0x0d, KEY_NEXT }, /* >>| */ + { 0x01, 0x24, KEY_PROG1 }, /* F1 */ + { 0x01, 0x25, KEY_PROG2 }, /* F2 */ +}; + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties anysee_properties; + +static int anysee_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct dvb_usb_device *d; + struct usb_host_interface *alt; + int ret; + + mutex_init(&anysee_usb_mutex); + + /* There is one interface with two alternate settings. + Alternate setting 0 is for bulk transfer. + Alternate setting 1 is for isochronous transfer. + We use bulk transfer (alternate setting 0). */ + if (intf->num_altsetting < 1) + return -ENODEV; + + ret = dvb_usb_device_init(intf, &anysee_properties, THIS_MODULE, &d, + adapter_nr); + if (ret) + return ret; + + alt = usb_altnum_to_altsetting(intf, 0); + if (alt == NULL) { + deb_info("%s: no alt found!\n", __func__); + return -ENODEV; + } + + ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber, + alt->desc.bAlternateSetting); + if (ret) + return ret; + + if (d) + ret = anysee_init(d); + + return ret; +} + +static struct usb_device_id anysee_table [] = { + { USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) }, + { USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, anysee_table); + +static struct dvb_usb_device_properties anysee_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + + .size_of_priv = sizeof(struct anysee_state), + + .num_adapters = 1, + .adapter = { + { + .streaming_ctrl = anysee_streaming_ctrl, + .frontend_attach = anysee_frontend_attach, + .tuner_attach = anysee_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 512, + } + } + }, + } + }, + + .rc_key_map = anysee_rc_keys, + .rc_key_map_size = ARRAY_SIZE(anysee_rc_keys), + .rc_query = anysee_rc_query, + .rc_interval = 200, /* windows driver uses 500ms */ + + .i2c_algo = &anysee_i2c_algo, + + .generic_bulk_ctrl_endpoint = 1, + + .num_device_descs = 1, + .devices = { + { + .name = "Anysee DVB USB2.0", + .cold_ids = {NULL}, + .warm_ids = {&anysee_table[0], + &anysee_table[1], NULL}, + }, + } +}; + +static struct usb_driver anysee_driver = { +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 15) + .owner = THIS_MODULE, +#endif + .name = "dvb_usb_anysee", + .probe = anysee_probe, + .disconnect = dvb_usb_device_exit, + .id_table = anysee_table, +}; + +/* module stuff */ +static int __init anysee_module_init(void) +{ + int ret; + + ret = usb_register(&anysee_driver); + if (ret) + err("%s: usb_register failed. Error number %d", __func__, ret); + + return ret; +} + +static void __exit anysee_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&anysee_driver); +} + +module_init(anysee_module_init); +module_exit(anysee_module_exit); + +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); +MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0"); +MODULE_LICENSE("GPL"); diff --git a/linux/drivers/media/dvb/dvb-usb/anysee.h b/linux/drivers/media/dvb/dvb-usb/anysee.h new file mode 100644 index 000000000..7ca01ff6e --- /dev/null +++ b/linux/drivers/media/dvb/dvb-usb/anysee.h @@ -0,0 +1,304 @@ +/* + * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * TODO: + * - add smart card reader support for Conditional Access (CA) + * + * Card reader in Anysee is nothing more than ISO 7816 card reader. + * There is no hardware CAM in any Anysee device sold. + * In my understanding it should be implemented by making own module + * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This + * module registers serial interface that can be used to communicate + * with any ISO 7816 smart card. + * + * Any help according to implement serial smart card reader support + * is highly welcome! + */ + +#ifndef _DVB_USB_ANYSEE_H_ +#define _DVB_USB_ANYSEE_H_ + +#define DVB_USB_LOG_PREFIX "anysee" +#include "dvb-usb.h" + +#define deb_info(args...) dprintk(dvb_usb_anysee_debug, 0x01, args) +#define deb_xfer(args...) dprintk(dvb_usb_anysee_debug, 0x02, args) +#define deb_rc(args...) dprintk(dvb_usb_anysee_debug, 0x04, args) +#define deb_reg(args...) dprintk(dvb_usb_anysee_debug, 0x08, args) +#define deb_i2c(args...) dprintk(dvb_usb_anysee_debug, 0x10, args) +#define deb_fw(args...) dprintk(dvb_usb_anysee_debug, 0x20, args) + +enum cmd { + CMD_I2C_READ = 0x33, + CMD_I2C_WRITE = 0x31, + CMD_REG_READ = 0xb0, + CMD_REG_WRITE = 0xb1, + CMD_STREAMING_CTRL = 0x12, + CMD_LED_AND_IR_CTRL = 0x16, + CMD_GET_IR_CODE = 0x41, + CMD_GET_HW_INFO = 0x19, + CMD_SMARTCARD = 0x34, +}; + +struct anysee_state { + u8 tuner; + u8 seq; +}; + +#endif + +/*************************************************************************** + * USB API description (reverse engineered) + *************************************************************************** + +Transaction flow: +================= +BULK[00001] >>> REQUEST PACKET 64 bytes +BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY) +BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY) + +General reply packet(s) are always used if not own reply defined. + +============================================================================ +| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY) +============================================================================ +| 00 | reply data (if any) from previous transaction +| | Just same reply packet as returned during previous transaction. +| | Needed only if reply is missed in previous transaction. +| | Just skip normally. +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY) +============================================================================ +| 00 | reply data (if any) +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | I2C WRITE REQUEST PACKET +============================================================================ +| 00 | 0x31 I2C write command +---------------------------------------------------------------------------- +| 01 | i2c address +---------------------------------------------------------------------------- +| 02 | data length +| | 0x02 (for typical I2C reg / val pair) +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04- | data +---------------------------------------------------------------------------- +| -59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | I2C READ REQUEST PACKET +============================================================================ +| 00 | 0x33 I2C read command +---------------------------------------------------------------------------- +| 01 | i2c address + 1 +---------------------------------------------------------------------------- +| 02 | register +---------------------------------------------------------------------------- +| 03 | 0x00 +---------------------------------------------------------------------------- +| 04 | 0x00 +---------------------------------------------------------------------------- +| 05 | 0x01 +---------------------------------------------------------------------------- +| 06-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET +============================================================================ +| 00 | 0xb1 register write command +---------------------------------------------------------------------------- +| 01-02 | register +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04 | value +---------------------------------------------------------------------------- +| 05-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET +============================================================================ +| 00 | 0xb0 register read command +---------------------------------------------------------------------------- +| 01-02 | register +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | LED CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x16 LED and IR control command +---------------------------------------------------------------------------- +| 01 | 0x01 (LED) +---------------------------------------------------------------------------- +| 03 | 0x00 blink +| | 0x01 lights continuously +---------------------------------------------------------------------------- +| 04 | blink interval +| | 0x00 fastest (looks like LED lights continuously) +| | 0xff slowest +---------------------------------------------------------------------------- +| 05-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | IR CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x16 LED and IR control command +---------------------------------------------------------------------------- +| 01 | 0x02 (IR) +---------------------------------------------------------------------------- +| 03 | 0x00 IR disabled +| | 0x01 IR enabled +---------------------------------------------------------------------------- +| 04-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | STREAMING CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x12 streaming control command +---------------------------------------------------------------------------- +| 01 | 0x00 streaming disabled +| | 0x01 streaming enabled +---------------------------------------------------------------------------- +| 02 | 0x00 +---------------------------------------------------------------------------- +| 03-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | REMOTE CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x41 remote control command +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | REMOTE CONTROL REPLY PACKET +============================================================================ +| 00 | 0x00 code not received +| | 0x01 code received +---------------------------------------------------------------------------- +| 01 | remote control code +---------------------------------------------------------------------------- +| 02-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GET HARDWARE INFO REQUEST PACKET +============================================================================ +| 00 | 0x19 get hardware info command +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GET HARDWARE INFO REPLY PACKET +============================================================================ +| 00 | hardware id +---------------------------------------------------------------------------- +| 01-02 | firmware version +---------------------------------------------------------------------------- +| 03-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | SMART CARD READER PACKET +============================================================================ +| 00 | 0x34 smart card reader command +---------------------------------------------------------------------------- +| xx | +---------------------------------------------------------------------------- +| xx-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +*/ diff --git a/linux/drivers/media/dvb/dvb-usb/au6610.c b/linux/drivers/media/dvb/dvb-usb/au6610.c index 578a27d14..fc3375c60 100644 --- a/linux/drivers/media/dvb/dvb-usb/au6610.c +++ b/linux/drivers/media/dvb/dvb-usb/au6610.c @@ -1,24 +1,31 @@ -/* DVB USB compliant linux driver for Sigmatek DVB-110 DVB-T USB2.0 receiver +/* + * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0. * * Copyright (C) 2006 Antti Palosaari <crope@iki.fi> * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * - * see Documentation/dvb/README.dvb-usb for more information + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "au6610.h" - #include "zl10353.h" #include "qt1010.h" /* debug */ static int dvb_usb_au6610_debug; module_param_named(debug, dvb_usb_au6610_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); - +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, @@ -42,9 +49,8 @@ static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr, } ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), operation, - USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index, usb_buf, - sizeof(usb_buf), AU6610_USB_TIMEOUT); - + USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index, + usb_buf, sizeof(usb_buf), AU6610_USB_TIMEOUT); if (ret < 0) return ret; @@ -116,15 +122,6 @@ static struct i2c_algorithm au6610_i2c_algo = { }; /* Callbacks for DVB USB */ -static int au6610_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) -{ - *cold = 0; - return 0; -} - static struct zl10353_config au6610_zl10353_config = { .demod_address = 0x0f, .no_tuner = 1, @@ -133,12 +130,12 @@ static struct zl10353_config au6610_zl10353_config = { static int au6610_zl10353_frontend_attach(struct dvb_usb_adapter *adap) { - if ((adap->fe = dvb_attach(zl10353_attach, &au6610_zl10353_config, - &adap->dev->i2c_adap)) != NULL) { - return 0; - } + adap->fe = dvb_attach(zl10353_attach, &au6610_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe == NULL) + return -ENODEV; - return -EIO; + return 0; } static struct qt1010_config au6610_qt1010_config = { @@ -171,7 +168,7 @@ static int au6610_probe(struct usb_interface *intf, alt = usb_altnum_to_altsetting(intf, AU6610_ALTSETTING); if (alt == NULL) { - deb_rc("no alt found!\n"); + deb_info("%s: no alt found!\n", __func__); return -ENODEV; } ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber, @@ -181,18 +178,19 @@ static int au6610_probe(struct usb_interface *intf, return ret; } - static struct usb_device_id au6610_table [] = { { USB_DEVICE(USB_VID_ALCOR_MICRO, USB_PID_SIGMATEK_DVB_110) }, { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, au6610_table); +MODULE_DEVICE_TABLE(usb, au6610_table); static struct dvb_usb_device_properties au6610_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, - .size_of_priv = 0, - .identify_state = au6610_identify_state, + + .size_of_priv = 0, + .num_adapters = 1, .adapter = { { @@ -206,26 +204,28 @@ static struct dvb_usb_device_properties au6610_properties = { .u = { .isoc = { .framesperurb = 40, - .framesize = 942, /* maximum packet size */ - .interval = 1.25, /* 125 us */ + .framesize = 942, + .interval = 1, } } }, } }, + .i2c_algo = &au6610_i2c_algo, + .num_device_descs = 1, .devices = { { - "Sigmatek DVB-110 DVB-T USB2.0", - { &au6610_table[0], NULL }, - { NULL }, + .name = "Sigmatek DVB-110 DVB-T USB2.0", + .cold_ids = {NULL}, + .warm_ids = {&au6610_table[0], NULL}, }, } }; static struct usb_driver au6610_driver = { -#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15) +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 15) .owner = THIS_MODULE, #endif .name = "dvb_usb_au6610", @@ -239,12 +239,11 @@ static int __init au6610_module_init(void) { int ret; - if ((ret = usb_register(&au6610_driver))) { + ret = usb_register(&au6610_driver); + if (ret) err("usb_register failed. Error number %d", ret); - return ret; - } - return 0; + return ret; } static void __exit au6610_module_exit(void) @@ -253,10 +252,10 @@ static void __exit au6610_module_exit(void) usb_deregister(&au6610_driver); } -module_init (au6610_module_init); -module_exit (au6610_module_exit); +module_init(au6610_module_init); +module_exit(au6610_module_exit); MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); -MODULE_DESCRIPTION("Driver Sigmatek DVB-110 DVB-T USB2.0 / AU6610"); +MODULE_DESCRIPTION("Driver for Alcor Micro AU6610 DVB-T USB2.0"); MODULE_VERSION("0.1"); MODULE_LICENSE("GPL"); diff --git a/linux/drivers/media/dvb/dvb-usb/au6610.h b/linux/drivers/media/dvb/dvb-usb/au6610.h index 4161b054c..7849abe2c 100644 --- a/linux/drivers/media/dvb/dvb-usb/au6610.h +++ b/linux/drivers/media/dvb/dvb-usb/au6610.h @@ -1,10 +1,30 @@ +/* + * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0. + * + * Copyright (C) 2006 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + #ifndef _DVB_USB_AU6610_H_ #define _DVB_USB_AU6610_H_ #define DVB_USB_LOG_PREFIX "au6610" #include "dvb-usb.h" -#define deb_rc(args...) dprintk(dvb_usb_au6610_debug,0x01,args) +#define deb_info(args...) dprintk(dvb_usb_au6610_debug, 0x01, args) #define AU6610_REQ_I2C_WRITE 0x14 #define AU6610_REQ_I2C_READ 0x13 diff --git a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c index 346223856..c4d40fe01 100644 --- a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -111,8 +111,8 @@ static int bristol_tuner_attach(struct dvb_usb_adapter *adap) struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1); s8 a; int if1=1220; - if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE && - adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_500_2) { + if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && + adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) { if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a; } return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id], @@ -402,8 +402,8 @@ static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap) { struct usb_device_descriptor *desc = &adap->dev->udev->descriptor; - if (desc->idVendor == USB_VID_PINNACLE && - desc->idProduct == USB_PID_PINNACLE_EXPRESSCARD_320CX) + if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX)) dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); else dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); @@ -845,8 +845,8 @@ static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap) struct i2c_adapter *tun_i2c; s8 a; int if1=1220; - if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE && - adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_STICK) { + if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && + adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) { if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a; } if (st->is_dib7000pc) @@ -990,11 +990,12 @@ static struct dib7000p_config dib7070p_dib7000p_config = { /* STK7070P */ static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap) { - if (adap->dev->udev->descriptor.idVendor == USB_VID_PINNACLE && - adap->dev->udev->descriptor.idProduct == USB_PID_PINNACLE_PCTV72E) - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + struct usb_device_descriptor *p = &adap->dev->udev->descriptor; + if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E)) + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); else - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/linux/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c index e1112e39f..733a7ff7b 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c @@ -127,7 +127,7 @@ int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, if ((*pos + hx->len + 4) >= fw->size) return -EINVAL; - hx->addr = le16_to_cpu( *((u16 *) &b[1]) ); + hx->addr = b[1] | (b[2] << 8); hx->type = b[3]; if (hx->type == 0x04) { diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 34245d1b7..e6b43fb3a 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -14,6 +14,7 @@ #define USB_VID_AFATECH 0x15a4 #define USB_VID_ALCOR_MICRO 0x058f #define USB_VID_ALINK 0x05e3 +#define USB_VID_AMT 0x1c73 #define USB_VID_ANCHOR 0x0547 #define USB_VID_ANSONIC 0x10b9 #define USB_VID_ANUBIS_ELECTRONIC 0x10fd @@ -57,6 +58,7 @@ #define USB_PID_AFATECH_AF9005 0x9020 #define USB_VID_ALINK_DTU 0xf170 #define USB_PID_ANSONIC_DVBT_USB 0x6000 +#define USB_PID_ANYSEE 0x861f #define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 #define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 #define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 diff --git a/linux/drivers/media/dvb/dvb-usb/gl861.c b/linux/drivers/media/dvb/dvb-usb/gl861.c index cc90a3054..36700b67d 100644 --- a/linux/drivers/media/dvb/dvb-usb/gl861.c +++ b/linux/drivers/media/dvb/dvb-usb/gl861.c @@ -1,8 +1,8 @@ /* DVB USB compliant linux driver for GL861 USB2.0 devices. * * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, version 2. * * see Documentation/dvb/README.dvb-usb for more information */ @@ -13,9 +13,9 @@ /* debug */ static int dvb_usb_gl861_debug; -module_param_named(debug,dvb_usb_gl861_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); - +module_param_named(debug, dvb_usb_gl861_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." + DVB_USB_DEBUG_STATUS); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, @@ -47,6 +47,8 @@ static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, return -EINVAL; } + msleep(1); /* avoid I2C errors */ + return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), req, type, value, index, rbuf, rlen, 2000); } @@ -68,7 +70,7 @@ static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], /* write/read request */ if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf, - msg[i].len, msg[i+1].buf, msg[i+1].len) < 0) + msg[i].len, msg[i+1].buf, msg[i+1].len) < 0) break; i++; } else @@ -92,16 +94,6 @@ static struct i2c_algorithm gl861_i2c_algo = { }; /* Callbacks for DVB USB */ -static int gl861_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) -{ - *cold = 0; - - return 0; -} - static struct zl10353_config gl861_zl10353_config = { .demod_address = 0x0f, .no_tuner = 1, @@ -110,12 +102,13 @@ static struct zl10353_config gl861_zl10353_config = { static int gl861_frontend_attach(struct dvb_usb_adapter *adap) { - if ((adap->fe = dvb_attach(zl10353_attach, &gl861_zl10353_config, - &adap->dev->i2c_adap)) != NULL) { - return 0; - } - return -EIO; + adap->fe = dvb_attach(zl10353_attach, &gl861_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe == NULL) + return -EIO; + + return 0; } static struct qt1010_config gl861_qt1010_config = { @@ -164,7 +157,7 @@ static struct usb_device_id gl861_table [] = { { USB_DEVICE(USB_VID_ALINK, USB_VID_ALINK_DTU) }, { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, gl861_table); +MODULE_DEVICE_TABLE(usb, gl861_table); static struct dvb_usb_device_properties gl861_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, @@ -172,7 +165,6 @@ static struct dvb_usb_device_properties gl861_properties = { .size_of_priv = 0, - .identify_state = gl861_identify_state, .num_adapters = 1, .adapter = {{ @@ -189,24 +181,26 @@ static struct dvb_usb_device_properties gl861_properties = { } } }, - }}, + } }, .i2c_algo = &gl861_i2c_algo, .num_device_descs = 2, .devices = { - { "MSI Mega Sky 55801 DVB-T USB2.0", - { &gl861_table[0], NULL }, - { NULL }, + { + .name = "MSI Mega Sky 55801 DVB-T USB2.0", + .cold_ids = { NULL }, + .warm_ids = { &gl861_table[0], NULL }, }, - { "A-LINK DTU DVB-T USB2.0", - { &gl861_table[1], NULL }, - { NULL }, + { + .name = "A-LINK DTU DVB-T USB2.0", + .cold_ids = { NULL }, + .warm_ids = { &gl861_table[1], NULL }, }, } }; static struct usb_driver gl861_driver = { -#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15) +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 15) .owner = THIS_MODULE, #endif .name = "dvb_usb_gl861", @@ -220,12 +214,11 @@ static int __init gl861_module_init(void) { int ret; - if ((ret = usb_register(&gl861_driver))) { + ret = usb_register(&gl861_driver); + if (ret) err("usb_register failed. Error number %d", ret); - return ret; - } - return 0; + return ret; } static void __exit gl861_module_exit(void) @@ -234,8 +227,8 @@ static void __exit gl861_module_exit(void) usb_deregister(&gl861_driver); } -module_init (gl861_module_init); -module_exit (gl861_module_exit); +module_init(gl861_module_init); +module_exit(gl861_module_exit); MODULE_AUTHOR("Carl Lundqvist <comabug@gmail.com>"); MODULE_DESCRIPTION("Driver MSI Mega Sky 580 DVB-T USB2.0 / GL861"); diff --git a/linux/drivers/media/dvb/dvb-usb/gl861.h b/linux/drivers/media/dvb/dvb-usb/gl861.h index 72a51afd5..c54855e2c 100644 --- a/linux/drivers/media/dvb/dvb-usb/gl861.h +++ b/linux/drivers/media/dvb/dvb-usb/gl861.h @@ -4,7 +4,7 @@ #define DVB_USB_LOG_PREFIX "gl861" #include "dvb-usb.h" -#define deb_rc(args...) dprintk(dvb_usb_gl861_debug,0x01,args) +#define deb_rc(args...) dprintk(dvb_usb_gl861_debug, 0x01, args) #define GL861_WRITE 0x40 #define GL861_READ 0xc0 diff --git a/linux/drivers/media/dvb/dvb-usb/gp8psk.c b/linux/drivers/media/dvb/dvb-usb/gp8psk.c index cc99e1cab..0a152fcb5 100644 --- a/linux/drivers/media/dvb/dvb-usb/gp8psk.c +++ b/linux/drivers/media/dvb/dvb-usb/gp8psk.c @@ -146,24 +146,24 @@ static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff) if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */ if(gp8psk_load_bcm4500fw(d)) - return EINVAL; + return -EINVAL; if (! (status & bmIntersilOn)) /* LNB Power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0, &buf, 1)) - return EINVAL; + return -EINVAL; /* Set DVB mode to 1 */ if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0)) - return EINVAL; + return -EINVAL; /* Abort possible TS (if previous tune crashed) */ if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0)) - return EINVAL; + return -EINVAL; } else { /* Turn off LNB power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1)) - return EINVAL; + return -EINVAL; /* Turn off 8psk power */ if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) return -EINVAL; diff --git a/linux/drivers/media/dvb/dvb-usb/m920x.c b/linux/drivers/media/dvb/dvb-usb/m920x.c index 7597c4b78..5a7766fab 100644 --- a/linux/drivers/media/dvb/dvb-usb/m920x.c +++ b/linux/drivers/media/dvb/dvb-usb/m920x.c @@ -16,6 +16,7 @@ #include "qt1010.h" #include "tda1004x.h" #include "tda827x.h" +#include <asm/unaligned.h> /* debug */ static int dvb_usb_m920x_debug; @@ -347,13 +348,13 @@ static int m920x_firmware_download(struct usb_device *udev, const struct firmwar for (pass = 0; pass < 2; pass++) { for (i = 0; i + (sizeof(u16) * 3) < fw->size;) { - value = le16_to_cpu(*(u16 *)(fw->data + i)); + value = get_unaligned_le16(fw->data + i); i += sizeof(u16); - index = le16_to_cpu(*(u16 *)(fw->data + i)); + index = get_unaligned_le16(fw->data + i); i += sizeof(u16); - size = le16_to_cpu(*(u16 *)(fw->data + i)); + size = get_unaligned_le16(fw->data + i); i += sizeof(u16); if (pass == 1) { diff --git a/linux/drivers/media/dvb/dvb-usb/umt-010.c b/linux/drivers/media/dvb/dvb-usb/umt-010.c index ca850d266..b6a3cbc44 100644 --- a/linux/drivers/media/dvb/dvb-usb/umt-010.c +++ b/linux/drivers/media/dvb/dvb-usb/umt-010.c @@ -107,7 +107,7 @@ static struct dvb_usb_device_properties umt_properties = { /* parameter for the MPEG2-data transfer */ .stream = { .type = USB_BULK, - .count = 20, + .count = MAX_NO_URBS_FOR_DATA_STREAM, .endpoint = 0x06, .u = { .bulk = { diff --git a/linux/drivers/media/dvb/frontends/dib0070.h b/linux/drivers/media/dvb/frontends/dib0070.h index 786e37d33..3eedfdf50 100644 --- a/linux/drivers/media/dvb/frontends/dib0070.h +++ b/linux/drivers/media/dvb/frontends/dib0070.h @@ -37,7 +37,20 @@ struct dib0070_config { u8 flip_chip; }; -extern struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg); +#if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE)) +extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct dib0070_config *cfg); +#else +static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct dib0070_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, uint8_t open); extern u16 dib0070_wbd_offset(struct dvb_frontend *); diff --git a/linux/drivers/media/dvb/frontends/dvb-pll.c b/linux/drivers/media/dvb/frontends/dvb-pll.c index 93785eef2..bb3e35373 100644 --- a/linux/drivers/media/dvb/frontends/dvb-pll.c +++ b/linux/drivers/media/dvb/frontends/dvb-pll.c @@ -344,6 +344,52 @@ static struct dvb_pll_desc dvb_pll_opera1 = { } }; +static void samsung_dtos403ih102a_set(struct dvb_frontend *fe, u8 *buf, + const struct dvb_frontend_parameters *params) +{ + struct dvb_pll_priv *priv = fe->tuner_priv; + struct i2c_msg msg = { + .addr = priv->pll_i2c_address, + .flags = 0, + .buf = buf, + .len = 4 + }; + int result; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + result = i2c_transfer(priv->i2c, &msg, 1); + if (result != 1) + printk(KERN_ERR "%s: i2c_transfer failed:%d", + __func__, result); + + buf[2] = 0x9e; + buf[3] = 0x90; + + return; +} + +/* unknown pll used in Samsung DTOS403IH102A DVB-C tuner */ +static struct dvb_pll_desc dvb_pll_samsung_dtos403ih102a = { + .name = "Samsung DTOS403IH102A", + .min = 44250000, + .max = 858000000, + .iffreq = 36125000, + .count = 8, + .set = samsung_dtos403ih102a_set, + .entries = { + { 135000000, 62500, 0xbe, 0x01 }, + { 177000000, 62500, 0xf6, 0x01 }, + { 370000000, 62500, 0xbe, 0x02 }, + { 450000000, 62500, 0xf6, 0x02 }, + { 466000000, 62500, 0xfe, 0x02 }, + { 538000000, 62500, 0xbe, 0x08 }, + { 826000000, 62500, 0xf6, 0x08 }, + { 999999999, 62500, 0xfe, 0x08 }, + } +}; + /* ----------------------------------------------------------- */ static struct dvb_pll_desc *pll_list[] = { @@ -361,6 +407,7 @@ static struct dvb_pll_desc *pll_list[] = { [DVB_PLL_SAMSUNG_TBMV] = &dvb_pll_samsung_tbmv, [DVB_PLL_PHILIPS_SD1878_TDA8261] = &dvb_pll_philips_sd1878_tda8261, [DVB_PLL_OPERA1] = &dvb_pll_opera1, + [DVB_PLL_SAMSUNG_DTOS403IH102A] = &dvb_pll_samsung_dtos403ih102a, }; /* ----------------------------------------------------------- */ diff --git a/linux/drivers/media/dvb/frontends/dvb-pll.h b/linux/drivers/media/dvb/frontends/dvb-pll.h index 872ca29e7..05239f579 100644 --- a/linux/drivers/media/dvb/frontends/dvb-pll.h +++ b/linux/drivers/media/dvb/frontends/dvb-pll.h @@ -22,6 +22,7 @@ #define DVB_PLL_SAMSUNG_TBMV 11 #define DVB_PLL_PHILIPS_SD1878_TDA8261 12 #define DVB_PLL_OPERA1 13 +#define DVB_PLL_SAMSUNG_DTOS403IH102A 14 /** * Attach a dvb-pll to the supplied frontend structure. diff --git a/linux/drivers/media/dvb/frontends/or51132.c b/linux/drivers/media/dvb/frontends/or51132.c index c7b5785f8..5ed32544d 100644 --- a/linux/drivers/media/dvb/frontends/or51132.c +++ b/linux/drivers/media/dvb/frontends/or51132.c @@ -126,7 +126,7 @@ static int or51132_readreg(struct or51132_state *state, u8 reg) reg, err); return -EREMOTEIO; } - return le16_to_cpup((u16*)buf); + return buf[0] | (buf[1] << 8); } static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) @@ -140,9 +140,9 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware dprintk("Firmware is %Zd bytes\n",fw->size); /* Get size of firmware A and B */ - firmwareAsize = le32_to_cpu(*((u32*)fw->data)); + firmwareAsize = le32_to_cpu(*((__le32*)fw->data)); dprintk("FirmwareA is %i bytes\n",firmwareAsize); - firmwareBsize = le32_to_cpu(*((u32*)(fw->data+4))); + firmwareBsize = le32_to_cpu(*((__le32*)(fw->data+4))); dprintk("FirmwareB is %i bytes\n",firmwareBsize); /* Upload firmware */ diff --git a/linux/drivers/media/dvb/frontends/tda10023.c b/linux/drivers/media/dvb/frontends/tda10023.c index 3195a80a9..ec9d772c4 100644 --- a/linux/drivers/media/dvb/frontends/tda10023.c +++ b/linux/drivers/media/dvb/frontends/tda10023.c @@ -38,17 +38,24 @@ #include "dvb_frontend.h" #include "tda1002x.h" +#define REG0_INIT_VAL 0x23 struct tda10023_state { struct i2c_adapter* i2c; /* configuration settings */ - const struct tda1002x_config* config; + const struct tda10023_config *config; struct dvb_frontend frontend; u8 pwm; u8 reg0; -}; + /* clock settings */ + u32 xtal; + u8 pll_m; + u8 pll_p; + u8 pll_n; + u32 sysclk; +}; #if 0 #define dprintk(x...) printk(x) @@ -58,59 +65,6 @@ struct tda10023_state { static int verbose; -#define XTAL 28920000UL -#define PLL_M 8UL -#define PLL_P 4UL -#define PLL_N 1UL -#define SYSCLK (XTAL*PLL_M/(PLL_N*PLL_P)) // -> 57840000 - -static u8 tda10023_inittab[]={ - // reg mask val - 0x2a,0xff,0x02, // PLL3, Bypass, Power Down - 0xff,0x64,0x00, // Sleep 100ms - 0x2a,0xff,0x03, // PLL3, Bypass, Power Down - 0xff,0x64,0x00, // Sleep 100ms - 0x28,0xff,PLL_M-1, // PLL1 M=8 - 0x29,0xff,((PLL_P-1)<<6)|(PLL_N-1), // PLL2 - 0x00,0xff,0x23, // GPR FSAMPLING=1 - 0x2a,0xff,0x08, // PLL3 PSACLK=1 - 0xff,0x64,0x00, // Sleep 100ms - 0x1f,0xff,0x00, // RESET - 0xff,0x64,0x00, // Sleep 100ms - 0xe6,0x0c,0x04, // RSCFG_IND - 0x10,0xc0,0x80, // DECDVBCFG1 PBER=1 - - 0x0e,0xff,0x82, // GAIN1 - 0x03,0x08,0x08, // CLKCONF DYN=1 - 0x2e,0xbf,0x30, // AGCCONF2 TRIAGC=0,POSAGC=ENAGCIF=1 PPWMTUN=0 PPWMIF=0 - 0x01,0xff,0x30, // AGCREF - 0x1e,0x84,0x84, // CONTROL SACLK_ON=1 - 0x1b,0xff,0xc8, // ADC TWOS=1 - 0x3b,0xff,0xff, // IFMAX - 0x3c,0xff,0x00, // IFMIN - 0x34,0xff,0x00, // PWMREF - 0x35,0xff,0xff, // TUNMAX - 0x36,0xff,0x00, // TUNMIN - 0x06,0xff,0x7f, // EQCONF1 POSI=7 ENADAPT=ENEQUAL=DFE=1 // 0x77 - 0x1c,0x30,0x30, // EQCONF2 STEPALGO=SGNALGO=1 - 0x37,0xff,0xf6, // DELTAF_LSB - 0x38,0xff,0xff, // DELTAF_MSB - 0x02,0xff,0x93, // AGCCONF1 IFS=1 KAGCIF=2 KAGCTUN=3 - 0x2d,0xff,0xf6, // SWEEP SWPOS=1 SWDYN=7 SWSTEP=1 SWLEN=2 - 0x04,0x10,0x00, // SWRAMP=1 - 0x12,0xff,0xa1, // INTP1 POCLKP=1 FEL=1 MFS=0 - 0x2b,0x01,0xa1, // INTS1 - 0x20,0xff,0x04, // INTP2 SWAPP=? MSBFIRSTP=? INTPSEL=? - 0x2c,0xff,0x0d, // INTP/S TRIP=0 TRIS=0 - 0xc4,0xff,0x00, - 0xc3,0x30,0x00, - 0xb5,0xff,0x19, // ERAGC_THD - 0x00,0x03,0x01, // GPR, CLBS soft reset - 0x00,0x03,0x03, // GPR, CLBS soft reset - 0xff,0x64,0x00, // Sleep 100ms - 0xff,0xff,0xff -}; - static u8 tda10023_readreg (struct tda10023_state* state, u8 reg) { u8 b0 [] = { reg }; @@ -219,30 +173,34 @@ static int tda10023_set_symbolrate (struct tda10023_state* state, u32 sr) s16 SFIL=0; u16 NDEC = 0; - if (sr < (u32)(SYSCLK/98.40)) { + /* avoid floating point operations multiplying syscloc and divider + by 10 */ + u32 sysclk_x_10 = state->sysclk * 10; + + if (sr < (u32)(sysclk_x_10/984)) { NDEC=3; SFIL=1; - } else if (sr<(u32)(SYSCLK/64.0)) { + } else if (sr < (u32)(sysclk_x_10/640)) { NDEC=3; SFIL=0; - } else if (sr<(u32)(SYSCLK/49.2)) { + } else if (sr < (u32)(sysclk_x_10/492)) { NDEC=2; SFIL=1; - } else if (sr<(u32)(SYSCLK/32.0)) { + } else if (sr < (u32)(sysclk_x_10/320)) { NDEC=2; SFIL=0; - } else if (sr<(u32)(SYSCLK/24.6)) { + } else if (sr < (u32)(sysclk_x_10/246)) { NDEC=1; SFIL=1; - } else if (sr<(u32)(SYSCLK/16.0)) { + } else if (sr < (u32)(sysclk_x_10/160)) { NDEC=1; SFIL=0; - } else if (sr<(u32)(SYSCLK/12.3)) { + } else if (sr < (u32)(sysclk_x_10/123)) { NDEC=0; SFIL=1; } - BDRI=SYSCLK*16; + BDRI = (state->sysclk)*16; BDRI>>=NDEC; BDRI +=sr/2; BDRI /=sr; @@ -255,11 +213,12 @@ static int tda10023_set_symbolrate (struct tda10023_state* state, u32 sr) BDRX=1<<(24+NDEC); BDRX*=sr; - do_div(BDRX,SYSCLK); // BDRX/=SYSCLK; + do_div(BDRX, state->sysclk); /* BDRX/=SYSCLK; */ BDR=(s32)BDRX; } -// printk("Symbolrate %i, BDR %i BDRI %i, NDEC %i\n",sr,BDR,BDRI,NDEC); + dprintk("Symbolrate %i, BDR %i BDRI %i, NDEC %i\n", + sr, BDR, BDRI, NDEC); tda10023_writebit (state, 0x03, 0xc0, NDEC<<6); tda10023_writereg (state, 0x0a, BDR&255); tda10023_writereg (state, 0x0b, (BDR>>8)&255); @@ -272,8 +231,67 @@ static int tda10023_set_symbolrate (struct tda10023_state* state, u32 sr) static int tda10023_init (struct dvb_frontend *fe) { struct tda10023_state* state = fe->demodulator_priv; + u8 tda10023_inittab[] = { +/* reg mask val */ +/* 000 */ 0x2a, 0xff, 0x02, /* PLL3, Bypass, Power Down */ +/* 003 */ 0xff, 0x64, 0x00, /* Sleep 100ms */ +/* 006 */ 0x2a, 0xff, 0x03, /* PLL3, Bypass, Power Down */ +/* 009 */ 0xff, 0x64, 0x00, /* Sleep 100ms */ + /* PLL1 */ +/* 012 */ 0x28, 0xff, (state->pll_m-1), + /* PLL2 */ +/* 015 */ 0x29, 0xff, ((state->pll_p-1)<<6)|(state->pll_n-1), + /* GPR FSAMPLING=1 */ +/* 018 */ 0x00, 0xff, REG0_INIT_VAL, +/* 021 */ 0x2a, 0xff, 0x08, /* PLL3 PSACLK=1 */ +/* 024 */ 0xff, 0x64, 0x00, /* Sleep 100ms */ +/* 027 */ 0x1f, 0xff, 0x00, /* RESET */ +/* 030 */ 0xff, 0x64, 0x00, /* Sleep 100ms */ +/* 033 */ 0xe6, 0x0c, 0x04, /* RSCFG_IND */ +/* 036 */ 0x10, 0xc0, 0x80, /* DECDVBCFG1 PBER=1 */ + +/* 039 */ 0x0e, 0xff, 0x82, /* GAIN1 */ +/* 042 */ 0x03, 0x08, 0x08, /* CLKCONF DYN=1 */ +/* 045 */ 0x2e, 0xbf, 0x30, /* AGCCONF2 TRIAGC=0,POSAGC=ENAGCIF=1 + PPWMTUN=0 PPWMIF=0 */ +/* 048 */ 0x01, 0xff, 0x30, /* AGCREF */ +/* 051 */ 0x1e, 0x84, 0x84, /* CONTROL SACLK_ON=1 */ +/* 054 */ 0x1b, 0xff, 0xc8, /* ADC TWOS=1 */ +/* 057 */ 0x3b, 0xff, 0xff, /* IFMAX */ +/* 060 */ 0x3c, 0xff, 0x00, /* IFMIN */ +/* 063 */ 0x34, 0xff, 0x00, /* PWMREF */ +/* 066 */ 0x35, 0xff, 0xff, /* TUNMAX */ +/* 069 */ 0x36, 0xff, 0x00, /* TUNMIN */ +/* 072 */ 0x06, 0xff, 0x7f, /* EQCONF1 POSI=7 ENADAPT=ENEQUAL=DFE=1 */ +/* 075 */ 0x1c, 0x30, 0x30, /* EQCONF2 STEPALGO=SGNALGO=1 */ +/* 078 */ 0x37, 0xff, 0xf6, /* DELTAF_LSB */ +/* 081 */ 0x38, 0xff, 0xff, /* DELTAF_MSB */ +/* 084 */ 0x02, 0xff, 0x93, /* AGCCONF1 IFS=1 KAGCIF=2 KAGCTUN=3 */ +/* 087 */ 0x2d, 0xff, 0xf6, /* SWEEP SWPOS=1 SWDYN=7 SWSTEP=1 SWLEN=2 */ +/* 090 */ 0x04, 0x10, 0x00, /* SWRAMP=1 */ +/* 093 */ 0x12, 0xff, TDA10023_OUTPUT_MODE_PARALLEL_B, /* + INTP1 POCLKP=1 FEL=1 MFS=0 */ +/* 096 */ 0x2b, 0x01, 0xa1, /* INTS1 */ +/* 099 */ 0x20, 0xff, 0x04, /* INTP2 SWAPP=? MSBFIRSTP=? INTPSEL=? */ +/* 102 */ 0x2c, 0xff, 0x0d, /* INTP/S TRIP=0 TRIS=0 */ +/* 105 */ 0xc4, 0xff, 0x00, +/* 108 */ 0xc3, 0x30, 0x00, +/* 111 */ 0xb5, 0xff, 0x19, /* ERAGC_THD */ +/* 114 */ 0x00, 0x03, 0x01, /* GPR, CLBS soft reset */ +/* 117 */ 0x00, 0x03, 0x03, /* GPR, CLBS soft reset */ +/* 120 */ 0xff, 0x64, 0x00, /* Sleep 100ms */ +/* 123 */ 0xff, 0xff, 0xff +}; + dprintk("DVB: TDA10023(%d): init chip\n", fe->dvb->num); + + /* override default values if set in config */ + if (state->config->deltaf) { + tda10023_inittab[80] = (state->config->deltaf & 0xff); + tda10023_inittab[83] = (state->config->deltaf >> 8); + } - dprintk("DVB: TDA10023(%d): init chip\n", fe->adapter->num); + if (state->config->output_mode) + tda10023_inittab[95] = state->config->output_mode; tda10023_writetab(state, tda10023_inittab); @@ -460,12 +478,11 @@ static void tda10023_release(struct dvb_frontend* fe) static struct dvb_frontend_ops tda10023_ops; -struct dvb_frontend* tda10023_attach(const struct tda1002x_config* config, - struct i2c_adapter* i2c, +struct dvb_frontend *tda10023_attach(const struct tda10023_config *config, + struct i2c_adapter *i2c, u8 pwm) { struct tda10023_state* state = NULL; - int i; /* allocate memory for the internal state */ state = kmalloc(sizeof(struct tda10023_state), GFP_KERNEL); @@ -474,22 +491,40 @@ struct dvb_frontend* tda10023_attach(const struct tda1002x_config* config, /* setup the state */ state->config = config; state->i2c = i2c; - memcpy(&state->frontend.ops, &tda10023_ops, sizeof(struct dvb_frontend_ops)); - state->pwm = pwm; - for (i=0; i < ARRAY_SIZE(tda10023_inittab);i+=3) { - if (tda10023_inittab[i] == 0x00) { - state->reg0 = tda10023_inittab[i+2]; - break; - } - } - // Wakeup if in standby + /* wakeup if in standby */ tda10023_writereg (state, 0x00, 0x33); /* check if the demod is there */ if ((tda10023_readreg(state, 0x1a) & 0xf0) != 0x70) goto error; /* create dvb_frontend */ memcpy(&state->frontend.ops, &tda10023_ops, sizeof(struct dvb_frontend_ops)); + state->pwm = pwm; + state->reg0 = REG0_INIT_VAL; + if (state->config->xtal) { + state->xtal = state->config->xtal; + state->pll_m = state->config->pll_m; + state->pll_p = state->config->pll_p; + state->pll_n = state->config->pll_n; + } else { + /* set default values if not defined in config */ + state->xtal = 28920000; + state->pll_m = 8; + state->pll_p = 4; + state->pll_n = 1; + } + + /* calc sysclk */ + state->sysclk = (state->xtal * state->pll_m / \ + (state->pll_n * state->pll_p)); + + state->frontend.ops.info.symbol_rate_min = (state->sysclk/2)/64; + state->frontend.ops.info.symbol_rate_max = (state->sysclk/2)/4; + + dprintk("DVB: TDA10023 %s: xtal:%d pll_m:%d pll_p:%d pll_n:%d\n", + __func__, state->xtal, state->pll_m, state->pll_p, + state->pll_n); + state->frontend.demodulator_priv = state; return &state->frontend; @@ -504,10 +539,10 @@ static struct dvb_frontend_ops tda10023_ops = { .name = "Philips TDA10023 DVB-C", .type = FE_QAM, .frequency_stepsize = 62500, - .frequency_min = 47000000, + .frequency_min = 47000000, .frequency_max = 862000000, - .symbol_rate_min = (SYSCLK/2)/64, /* SACLK/64 == (SYSCLK/2)/64 */ - .symbol_rate_max = (SYSCLK/2)/4, /* SACLK/4 */ + .symbol_rate_min = 0, /* set in tda10023_attach */ + .symbol_rate_max = 0, /* set in tda10023_attach */ #if 0 .frequency_tolerance = ???, .symbol_rate_tolerance = ???, /* ppm */ /* == 8% (spec p. 5) */ diff --git a/linux/drivers/media/dvb/frontends/tda1002x.h b/linux/drivers/media/dvb/frontends/tda1002x.h index 1bcc0d44b..afc0a32ea 100644 --- a/linux/drivers/media/dvb/frontends/tda1002x.h +++ b/linux/drivers/media/dvb/frontends/tda1002x.h @@ -26,13 +26,37 @@ #include <linux/dvb/frontend.h> -struct tda1002x_config -{ +struct tda1002x_config { /* the demodulator's i2c address */ u8 demod_address; u8 invert; }; +enum tda10023_output_mode { + TDA10023_OUTPUT_MODE_PARALLEL_A = 0xe0, + TDA10023_OUTPUT_MODE_PARALLEL_B = 0xa1, + TDA10023_OUTPUT_MODE_PARALLEL_C = 0xa0, + TDA10023_OUTPUT_MODE_SERIAL, /* TODO: not implemented */ +}; + +struct tda10023_config { + /* the demodulator's i2c address */ + u8 demod_address; + u8 invert; + + /* clock settings */ + u32 xtal; /* defaults: 28920000 */ + u8 pll_m; /* defaults: 8 */ + u8 pll_p; /* defaults: 4 */ + u8 pll_n; /* defaults: 1 */ + + /* MPEG2 TS output mode */ + u8 output_mode; + + /* input freq offset + baseband conversion type */ + u16 deltaf; +}; + #if defined(CONFIG_DVB_TDA10021) || (defined(CONFIG_DVB_TDA10021_MODULE) && defined(MODULE)) extern struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config, struct i2c_adapter* i2c, u8 pwm); @@ -45,12 +69,15 @@ static inline struct dvb_frontend* tda10021_attach(const struct tda1002x_config* } #endif // CONFIG_DVB_TDA10021 -#if defined(CONFIG_DVB_TDA10023) || (defined(CONFIG_DVB_TDA10023_MODULE) && defined(MODULE)) -extern struct dvb_frontend* tda10023_attach(const struct tda1002x_config* config, - struct i2c_adapter* i2c, u8 pwm); +#if defined(CONFIG_DVB_TDA10023) || \ + (defined(CONFIG_DVB_TDA10023_MODULE) && defined(MODULE)) +extern struct dvb_frontend *tda10023_attach( + const struct tda10023_config *config, + struct i2c_adapter *i2c, u8 pwm); #else -static inline struct dvb_frontend* tda10023_attach(const struct tda1002x_config* config, - struct i2c_adapter* i2c, u8 pwm) +static inline struct dvb_frontend *tda10023_attach( + const struct tda1002x_config *config, + struct i2c_adapter *i2c, u8 pwm) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; diff --git a/linux/drivers/media/dvb/frontends/tda1004x.c b/linux/drivers/media/dvb/frontends/tda1004x.c index 499738463..a0d638653 100644 --- a/linux/drivers/media/dvb/frontends/tda1004x.c +++ b/linux/drivers/media/dvb/frontends/tda1004x.c @@ -1248,11 +1248,14 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, struct i2c_adapter* i2c) { struct tda1004x_state *state; + int id; /* allocate memory for the internal state */ state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL); - if (!state) + if (!state) { + printk(KERN_ERR "Can't alocate memory for tda10045 state\n"); return NULL; + } /* setup the state */ state->config = config; @@ -1260,7 +1263,15 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, state->demod_type = TDA1004X_DEMOD_TDA10045; /* check if the demod is there */ - if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x25) { + id = tda1004x_read_byte(state, TDA1004X_CHIPID); + if (id < 0) { + printk(KERN_ERR "tda10045: chip is not answering. Giving up.\n"); + kfree(state); + return NULL; + } + + if (id != 0x25) { + printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id); kfree(state); return NULL; } @@ -1307,11 +1318,14 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, struct i2c_adapter* i2c) { struct tda1004x_state *state; + int id; /* allocate memory for the internal state */ state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL); - if (!state) + if (!state) { + printk(KERN_ERR "Can't alocate memory for tda10046 state\n"); return NULL; + } /* setup the state */ state->config = config; @@ -1319,7 +1333,14 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, state->demod_type = TDA1004X_DEMOD_TDA10046; /* check if the demod is there */ - if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x46) { + id = tda1004x_read_byte(state, TDA1004X_CHIPID); + if (id < 0) { + printk(KERN_ERR "tda10046: chip is not answering. Giving up.\n"); + kfree(state); + return NULL; + } + if (id != 0x46) { + printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id); kfree(state); return NULL; } diff --git a/linux/drivers/media/dvb/ttpci/Kconfig b/linux/drivers/media/dvb/ttpci/Kconfig index d4339b1b3..07643e010 100644 --- a/linux/drivers/media/dvb/ttpci/Kconfig +++ b/linux/drivers/media/dvb/ttpci/Kconfig @@ -101,6 +101,7 @@ config DVB_BUDGET config DVB_BUDGET_CI tristate "Budget cards with onboard CI connector" depends on DVB_BUDGET_CORE && I2C + depends on INPUT # due to IR select DVB_STV0297 if !DVB_FE_CUSTOMISE select DVB_STV0299 if !DVB_FE_CUSTOMISE select DVB_TDA1004X if !DVB_FE_CUSTOMISE diff --git a/linux/drivers/media/dvb/ttpci/av7110.c b/linux/drivers/media/dvb/ttpci/av7110.c index 5a747a569..073ed350f 100644 --- a/linux/drivers/media/dvb/ttpci/av7110.c +++ b/linux/drivers/media/dvb/ttpci/av7110.c @@ -51,6 +51,7 @@ #include <linux/crc32.h> #include <linux/i2c.h> #include <linux/kthread.h> +#include <asm/unaligned.h> #include <asm/system.h> @@ -1461,9 +1462,9 @@ static int check_firmware(struct av7110* av7110) ptr += 4; /* check dpram file */ - crc = ntohl(*(u32*) ptr); + crc = get_unaligned_be32(ptr); ptr += 4; - len = ntohl(*(u32*) ptr); + len = get_unaligned_be32(ptr); ptr += 4; if (len >= 512) { printk("dvb-ttpci: dpram file is way too big.\n"); @@ -1478,9 +1479,9 @@ static int check_firmware(struct av7110* av7110) ptr += len; /* check root file */ - crc = ntohl(*(u32*) ptr); + crc = get_unaligned_be32(ptr); ptr += 4; - len = ntohl(*(u32*) ptr); + len = get_unaligned_be32(ptr); ptr += 4; if (len <= 200000 || len >= 300000 || diff --git a/linux/drivers/media/dvb/ttpci/av7110_av.c b/linux/drivers/media/dvb/ttpci/av7110_av.c index 3e6b650fb..ec55a968f 100644 --- a/linux/drivers/media/dvb/ttpci/av7110_av.c +++ b/linux/drivers/media/dvb/ttpci/av7110_av.c @@ -965,8 +965,9 @@ static u8 iframe_header[] = { 0x00, 0x00, 0x01, 0xe0, 0x00, 0x00, 0x80, 0x00, 0x static int play_iframe(struct av7110 *av7110, char __user *buf, unsigned int len, int nonblock) { - int i, n; + unsigned i, n; int progressive = 0; + int match = 0; dprintk(2, "av7110:%p, \n", av7110); @@ -975,12 +976,31 @@ static int play_iframe(struct av7110 *av7110, char __user *buf, unsigned int len return -EBUSY; } - for (i = 0; i < len - 5; i++) { - /* get progressive flag from picture extension */ - if (buf[i] == 0x00 && buf[i+1] == 0x00 && - buf[i+2] == 0x01 && (unsigned char)buf[i+3] == 0xb5 && - (buf[i+4] & 0xf0) == 0x10) - progressive = buf[i+5] & 0x08; + /* search in buf for instances of 00 00 01 b5 1? */ + for (i = 0; i < len; i++) { + unsigned char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (match == 5) { + progressive = c & 0x08; + match = 0; + } + if (c == 0x00) { + match = (match == 1 || match == 2) ? 2 : 1; + continue; + } + switch (match++) { + case 2: if (c == 0x01) + continue; + break; + case 3: if (c == 0xb5) + continue; + break; + case 4: if ((c & 0xf0) == 0x10) + continue; + break; + } + match = 0; } /* setting n always > 1, fixes problems when playing stillframes diff --git a/linux/drivers/media/dvb/ttpci/budget-av.c b/linux/drivers/media/dvb/ttpci/budget-av.c index b30a5288e..b7d1f2f18 100644 --- a/linux/drivers/media/dvb/ttpci/budget-av.c +++ b/linux/drivers/media/dvb/ttpci/budget-av.c @@ -667,6 +667,11 @@ static struct tda1002x_config philips_cu1216_config_altaddress = { .invert = 0, }; +static struct tda10023_config philips_cu1216_tda10023_config = { + .demod_address = 0x0c, + .invert = 1, +}; + static int philips_tu1216_tuner_init(struct dvb_frontend *fe) { struct budget *budget = (struct budget *) fe->dvb->priv; @@ -1019,9 +1024,10 @@ static void frontend_init(struct budget_av *budget_av) case SUBID_DVBC_KNC1_PLUS_MK3: budget_av->reinitialise_demod = 1; budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240; - fe = dvb_attach(tda10023_attach, &philips_cu1216_config, - &budget_av->budget.i2c_adap, - read_pwm(budget_av)); + fe = dvb_attach(tda10023_attach, + &philips_cu1216_tda10023_config, + &budget_av->budget.i2c_adap, + read_pwm(budget_av)); if (fe) { fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params; } diff --git a/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index 6716ab2b1..df7add8a9 100644 --- a/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/linux/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -560,7 +560,7 @@ static void ttusb_process_muxpack(struct ttusb *ttusb, const u8 * muxpack, u16 csum = 0, cc; int i; for (i = 0; i < len; i += 2) - csum ^= le16_to_cpup((u16 *) (muxpack + i)); + csum ^= le16_to_cpup((__le16 *) (muxpack + i)); if (csum) { printk("%s: muxpack with incorrect checksum, ignoring\n", __func__); diff --git a/linux/drivers/media/dvb/ttusb-dec/Kconfig b/linux/drivers/media/dvb/ttusb-dec/Kconfig index 0712899e3..a23cc0aa1 100644 --- a/linux/drivers/media/dvb/ttusb-dec/Kconfig +++ b/linux/drivers/media/dvb/ttusb-dec/Kconfig @@ -1,6 +1,6 @@ config DVB_TTUSB_DEC tristate "Technotrend/Hauppauge USB DEC devices" - depends on DVB_CORE && USB + depends on DVB_CORE && USB && INPUT depends on HOTPLUG # due to FW_LOADER select FW_LOADER select CRC32 diff --git a/linux/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/linux/drivers/media/dvb/ttusb-dec/ttusb_dec.c index cb930e37e..052979dc9 100644 --- a/linux/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/linux/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -358,7 +358,7 @@ static int ttusb_dec_get_stb_state (struct ttusb_dec *dec, unsigned int *mode, u8 c[COMMAND_PACKET_SIZE]; int c_length; int result; - unsigned int tmp; + __be32 tmp; dprintk("%s\n", __func__); @@ -413,9 +413,9 @@ static void ttusb_dec_set_pids(struct ttusb_dec *dec) 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - u16 pcr = htons(dec->pid[DMX_PES_PCR]); - u16 audio = htons(dec->pid[DMX_PES_AUDIO]); - u16 video = htons(dec->pid[DMX_PES_VIDEO]); + __be16 pcr = htons(dec->pid[DMX_PES_PCR]); + __be16 audio = htons(dec->pid[DMX_PES_AUDIO]); + __be16 video = htons(dec->pid[DMX_PES_VIDEO]); dprintk("%s\n", __func__); @@ -450,7 +450,7 @@ static void ttusb_dec_process_pva(struct ttusb_dec *dec, u8 *pva, int length) case 0x01: { /* VideoStream */ int prebytes = pva[5] & 0x03; int postbytes = (pva[5] & 0x0c) >> 2; - u16 v_pes_payload_length; + __be16 v_pes_payload_length; if (output_pva) { dec->video_filter->feed->cb.ts(pva, length, NULL, 0, @@ -1025,7 +1025,7 @@ static int ttusb_dec_start_sec_feed(struct dvb_demux_feed *dvbdmxfeed) 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; - u16 pid; + __be16 pid; u8 c[COMMAND_PACKET_SIZE]; int c_length; int result; @@ -1297,9 +1297,10 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) u8 *firmware = NULL; size_t firmware_size = 0; u16 firmware_csum = 0; - u16 firmware_csum_ns; - u32 firmware_size_nl; - u32 crc32_csum, crc32_check, tmp; + __be16 firmware_csum_ns; + __be32 firmware_size_nl; + u32 crc32_csum, crc32_check; + __be32 tmp; const struct firmware *fw_entry = NULL; dprintk("%s\n", __func__); @@ -1325,7 +1326,7 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) valid. */ crc32_csum = crc32(~0L, firmware, 56) ^ ~0L; memcpy(&tmp, &firmware[56], 4); - crc32_check = htonl(tmp); + crc32_check = ntohl(tmp); if (crc32_csum != crc32_check) { printk("%s: crc32 check of DSP code failed (calculated " "0x%08x != 0x%08x in file), file invalid.\n", @@ -1646,7 +1647,7 @@ static int ttusb_dec_probe(struct usb_interface *intf, usb_set_intfdata(intf, (void *)dec); - switch (le16_to_cpu(id->idProduct)) { + switch (id->idProduct) { case 0x1006: ttusb_dec_set_model(dec, TTUSB_DEC3000S); break; @@ -1671,7 +1672,7 @@ static int ttusb_dec_probe(struct usb_interface *intf, ttusb_dec_init_dvb(dec); dec->adapter.priv = dec; - switch (le16_to_cpu(id->idProduct)) { + switch (id->idProduct) { case 0x1006: dec->fe = ttusbdecfe_dvbs_attach(&fe_config); break; diff --git a/linux/drivers/media/dvb/ttusb-dec/ttusbdecfe.c b/linux/drivers/media/dvb/ttusb-dec/ttusbdecfe.c index eb5eaeccd..443af2409 100644 --- a/linux/drivers/media/dvb/ttusb-dec/ttusbdecfe.c +++ b/linux/drivers/media/dvb/ttusb-dec/ttusbdecfe.c @@ -86,7 +86,7 @@ static int ttusbdecfe_dvbt_set_frontend(struct dvb_frontend* fe, struct dvb_fron 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0xff }; - u32 freq = htonl(p->frequency / 1000); + __be32 freq = htonl(p->frequency / 1000); memcpy(&b[4], &freq, sizeof (u32)); state->config->send_command(fe, 0x71, sizeof(b), b, NULL, NULL); @@ -117,10 +117,10 @@ static int ttusbdecfe_dvbs_set_frontend(struct dvb_frontend* fe, struct dvb_fron 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; - u32 freq; - u32 sym_rate; - u32 band; - u32 lnb_voltage; + __be32 freq; + __be32 sym_rate; + __be32 band; + __be32 lnb_voltage; freq = htonl(p->frequency + (state->hi_band ? LOF_HI : LOF_LO)); |