summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/bt8xx/bttv-cards.c
diff options
context:
space:
mode:
Diffstat (limited to 'linux/drivers/media/video/bt8xx/bttv-cards.c')
-rw-r--r--linux/drivers/media/video/bt8xx/bttv-cards.c392
1 files changed, 363 insertions, 29 deletions
diff --git a/linux/drivers/media/video/bt8xx/bttv-cards.c b/linux/drivers/media/video/bt8xx/bttv-cards.c
index a2719c6bd..1c13dbfec 100644
--- a/linux/drivers/media/video/bt8xx/bttv-cards.c
+++ b/linux/drivers/media/video/bt8xx/bttv-cards.c
@@ -76,6 +76,9 @@ static void geovision_muxsel(struct bttv *btv, unsigned int input);
static void phytec_muxsel(struct bttv *btv, unsigned int input);
+static void gv800s_muxsel(struct bttv *btv, unsigned int input);
+static void gv800s_init(struct bttv *btv);
+
static int terratec_active_radio_upgrade(struct bttv *btv);
static int tea5757_read(struct bttv *btv);
static int tea5757_write(struct bttv *btv, int value);
@@ -94,12 +97,10 @@ static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
+static unsigned int audiodev[BTTV_MAX];
+static unsigned int saa6588[BTTV_MAX];
static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
-#ifdef MODULE
-static unsigned int autoload = 1;
-#else
-static unsigned int autoload;
-#endif
+static unsigned int autoload = UNSET;
static unsigned int gpiomask = UNSET;
static unsigned int audioall = UNSET;
static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
@@ -118,6 +119,7 @@ module_param_array(pll, int, NULL, 0444);
module_param_array(tuner, int, NULL, 0444);
module_param_array(svhs, int, NULL, 0444);
module_param_array(remote, int, NULL, 0444);
+module_param_array(audiodev, int, NULL, 0444);
module_param_array(audiomux, int, NULL, 0444);
MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
@@ -128,7 +130,14 @@ MODULE_PARM_DESC(latency,"pci latency timer");
MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
MODULE_PARM_DESC(tuner,"specify installed tuner type");
-MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
+MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
+MODULE_PARM_DESC(audiodev, "specify audio device:\n"
+ "\t\t-1 = no audio\n"
+ "\t\t 0 = autodetect (default)\n"
+ "\t\t 1 = msp3400\n"
+ "\t\t 2 = tda7432\n"
+ "\t\t 3 = tvaudio");
+MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
" [some VIA/SIS chipsets are known to have problem with overlay]");
@@ -296,6 +305,8 @@ static struct CARD {
/* Duplicate PCI ID, reconfigure for this board during the eeprom read.
* { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
+ { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"},
+
/* DVB cards (using pci function .1 for mpeg data xfer) */
{ 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
@@ -312,6 +323,20 @@ static struct CARD {
{ 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" },
{ 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" },
{ 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" },
+ { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
+ { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
+ { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
+ { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
+
+ { 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" },
+ { 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" },
+ { 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" },
+ { 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" },
+ { 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" },
+ { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" },
+ { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" },
+ { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" },
+
{ 0, -1, NULL }
};
@@ -2847,7 +2872,74 @@ struct tvcard bttv_tvcards[] = {
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
- }
+ },
+ [BTTV_BOARD_GEOVISION_GV800S] = {
+ /* Bruno Christo <bchristo@inf.ufsm.br>
+ *
+ * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
+ * 1 audio input per BT878A = 4 audio inputs
+ * 4 video inputs per BT878A = 16 video inputs
+ * This is the first BT878A chip of the GV-800(S). It's the
+ * "master" chip and it controls the video inputs through an
+ * analog multiplexer (a CD22M3494) via some GPIO pins. The
+ * slaves should use card type 0x9e (following this one).
+ * There is a EEPROM on the card which is currently not handled.
+ * The audio input is not working yet.
+ */
+ .name = "Geovision GV-800(S) (master)",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .svhs = NO_SVHS,
+ .gpiomask = 0xf107f,
+ .no_gpioirq = 1,
+ .muxsel = MUXSEL(2, 2, 2, 2),
+ .pll = PLL_28,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .no_tda9875 = 1,
+ .muxsel_hook = gv800s_muxsel,
+ },
+ [BTTV_BOARD_GEOVISION_GV800S_SL] = {
+ /* Bruno Christo <bchristo@inf.ufsm.br>
+ *
+ * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
+ * 1 audio input per BT878A = 4 audio inputs
+ * 4 video inputs per BT878A = 16 video inputs
+ * The 3 other BT878A chips are "slave" chips of the GV-800(S)
+ * and should use this card type.
+ * The audio input is not working yet.
+ */
+ .name = "Geovision GV-800(S) (slave)",
+ .video_inputs = 4,
+ /* .audio_inputs= 1, */
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .svhs = NO_SVHS,
+ .gpiomask = 0x00,
+ .no_gpioirq = 1,
+ .muxsel = MUXSEL(2, 2, 2, 2),
+ .pll = PLL_28,
+ .no_msp34xx = 1,
+ .no_tda7432 = 1,
+ .no_tda9875 = 1,
+ .muxsel_hook = gv800s_muxsel,
+ },
+ [BTTV_BOARD_PV183] = {
+ .name = "ProVideo PV183", /* 0x9f */
+ .video_inputs = 2,
+ /* .audio_inputs= 0, */
+ .svhs = NO_SVHS,
+ .gpiomask = 0,
+ .muxsel = MUXSEL(2, 3),
+ .gpiomux = { 0 },
+ .needs_tvaudio = 0,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ },
};
static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
@@ -2891,7 +2983,7 @@ void __devinit bttv_idcard(struct bttv *btv)
btv->c.nr, btv->cardid & 0xffff,
(btv->cardid >> 16) & 0xffff);
printk(KERN_DEBUG "please mail id, board name and "
- "the correct card= insmod option to video4linux-list@redhat.com\n");
+ "the correct card= insmod option to linux-media@vger.kernel.org\n");
}
}
@@ -3270,6 +3362,17 @@ void __devinit bttv_init_card1(struct bttv *btv)
/* initialization part two -- after registering i2c bus */
void __devinit bttv_init_card2(struct bttv *btv)
{
+ static const unsigned short tvaudio_addrs[] = {
+ I2C_ADDR_TDA8425 >> 1,
+ I2C_ADDR_TEA6300 >> 1,
+ I2C_ADDR_TEA6420 >> 1,
+ I2C_ADDR_TDA9840 >> 1,
+ I2C_ADDR_TDA985x_L >> 1,
+ I2C_ADDR_TDA985x_H >> 1,
+ I2C_ADDR_TDA9874 >> 1,
+ I2C_ADDR_PIC16C54 >> 1,
+ I2C_CLIENT_END
+ };
int addr=ADDR_UNSET;
btv->tuner_type = UNSET;
@@ -3376,6 +3479,9 @@ void __devinit bttv_init_card2(struct bttv *btv)
case BTTV_BOARD_KODICOM_4400R:
kodicom4400r_init(btv);
break;
+ case BTTV_BOARD_GEOVISION_GV800S:
+ gv800s_init(btv);
+ break;
}
/* pll configuration */
@@ -3430,6 +3536,12 @@ void __devinit bttv_init_card2(struct bttv *btv)
printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
btv->tuner_type);
+ if (autoload != UNSET) {
+ printk(KERN_WARNING "bttv%d: the autoload option is obsolete.\n", btv->c.nr);
+ printk(KERN_WARNING "bttv%d: use option msp3400, tda7432 or tvaudio to\n", btv->c.nr);
+ printk(KERN_WARNING "bttv%d: override which audio module should be used.\n", btv->c.nr);
+ }
+
if (UNSET == btv->tuner_type)
btv->tuner_type = TUNER_ABSENT;
@@ -3437,8 +3549,13 @@ void __devinit bttv_init_card2(struct bttv *btv)
struct tuner_setup tun_setup;
/* Load tuner module before issuing tuner config call! */
- if (autoload)
- request_module("tuner");
+ if (bttv_tvcards[btv->c.type].has_radio)
+ v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+ "tuner", "tuner", v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+ v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap, "tuner",
+ "tuner", v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+ v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap, "tuner",
+ "tuner", v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
tun_setup.type = btv->tuner_type;
@@ -3447,7 +3564,7 @@ void __devinit bttv_init_card2(struct bttv *btv)
if (bttv_tvcards[btv->c.type].has_radio)
tun_setup.mode_mask |= T_RADIO;
- bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
+ bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
}
if (btv->tda9887_conf) {
@@ -3456,7 +3573,7 @@ void __devinit bttv_init_card2(struct bttv *btv)
tda9887_cfg.tuner = TUNER_TDA9887;
tda9887_cfg.priv = &btv->tda9887_conf;
- bttv_call_i2c_clients(btv, TUNER_SET_CONFIG, &tda9887_cfg);
+ bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
}
btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
@@ -3479,31 +3596,127 @@ void __devinit bttv_init_card2(struct bttv *btv)
if (bttv_tvcards[btv->c.type].audio_mode_gpio)
btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
- if (!autoload)
- return;
-
if (btv->tuner_type == TUNER_ABSENT)
return; /* no tuner or related drivers to load */
+ if (btv->has_saa6588 || saa6588[btv->c.nr]) {
+ /* Probe for RDS receiver chip */
+ static const unsigned short addrs[] = {
+ 0x20 >> 1,
+ 0x22 >> 1,
+ I2C_CLIENT_END
+ };
+ struct v4l2_subdev *sd;
+
+ sd = v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+ "saa6588", "saa6588", addrs);
+ btv->has_saa6588 = (sd != NULL);
+ }
+
/* try to detect audio/fader chips */
- if (!bttv_tvcards[btv->c.type].no_msp34xx &&
- bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
- request_module("msp3400");
- if (bttv_tvcards[btv->c.type].msp34xx_alt &&
- bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
- request_module("msp3400");
+ /* First check if the user specified the audio chip via a module
+ option. */
+
+ switch (audiodev[btv->c.nr]) {
+ case -1:
+ return; /* do not load any audio module */
+
+ case 0: /* autodetect */
+ break;
+
+ case 1: {
+ /* The user specified that we should probe for msp3400 */
+ static const unsigned short addrs[] = {
+ I2C_ADDR_MSP3400 >> 1,
+ I2C_ADDR_MSP3400_ALT >> 1,
+ I2C_CLIENT_END
+ };
+
+ btv->sd_msp34xx = v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+ "msp3400", "msp3400", addrs);
+ if (btv->sd_msp34xx)
+ return;
+ goto no_audio;
+ }
+
+ case 2: {
+ /* The user specified that we should probe for tda7432 */
+ static const unsigned short addrs[] = {
+ I2C_ADDR_TDA7432 >> 1,
+ I2C_CLIENT_END
+ };
- if (!bttv_tvcards[btv->c.type].no_tda9875 &&
- bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
- request_module("tda9875");
+ if (v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+ "tda7432", "tda7432", addrs))
+ return;
+ goto no_audio;
+ }
- if (!bttv_tvcards[btv->c.type].no_tda7432 &&
- bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
- request_module("tda7432");
+ case 3: {
+ /* The user specified that we should probe for tvaudio */
+ btv->sd_tvaudio = v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+ "tvaudio", "tvaudio", tvaudio_addrs);
+ if (btv->sd_tvaudio)
+ return;
+ goto no_audio;
+ }
- if (bttv_tvcards[btv->c.type].needs_tvaudio)
- request_module("tvaudio");
+ default:
+ printk(KERN_WARNING "bttv%d: unknown audiodev value!\n",
+ btv->c.nr);
+ return;
+ }
+
+ /* There were no overrides, so now we try to discover this through the
+ card definition */
+
+ /* probe for msp3400 first: this driver can detect whether or not
+ it really is a msp3400, so it will return NULL when the device
+ found is really something else (e.g. a tea6300). */
+ if (!bttv_tvcards[btv->c.type].no_msp34xx) {
+ static const unsigned short addrs[] = {
+ I2C_ADDR_MSP3400 >> 1,
+ I2C_CLIENT_END
+ };
+
+ btv->sd_msp34xx = v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+ "msp3400", "msp3400", addrs);
+ } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
+ static const unsigned short addrs[] = {
+ I2C_ADDR_MSP3400_ALT >> 1,
+ I2C_CLIENT_END
+ };
+
+ btv->sd_msp34xx = v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+ "msp3400", "msp3400", addrs);
+ }
+
+ /* If we found a msp34xx, then we're done. */
+ if (btv->sd_msp34xx)
+ return;
+
+ /* it might also be a tda7432. */
+ if (!bttv_tvcards[btv->c.type].no_tda7432) {
+ static const unsigned short addrs[] = {
+ I2C_ADDR_TDA7432 >> 1,
+ I2C_CLIENT_END
+ };
+
+ if (v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+ "tda7432", "tda7432", addrs))
+ return;
+ }
+
+ /* Now see if we can find one of the tvaudio devices. */
+ btv->sd_tvaudio = v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+ "tvaudio", "tvaudio", tvaudio_addrs);
+ if (btv->sd_tvaudio)
+ return;
+
+no_audio:
+ printk(KERN_WARNING "bttv%d: audio absent, no audio device found!\n",
+ btv->c.nr);
}
@@ -3575,6 +3788,7 @@ static int terratec_active_radio_upgrade(struct bttv *btv)
printk("bttv%d: Terratec Active Radio Upgrade found.\n",
btv->c.nr);
btv->has_radio = 1;
+ btv->has_saa6588 = 1;
btv->has_matchbox = 1;
} else {
btv->has_radio = 0;
@@ -3681,7 +3895,11 @@ static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
unsigned short type;
for (i = 4*16; i < 8*16; i += 16) {
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 20)
+ u16 checksum = ip_compute_csum((unsigned char *)(ee + i), 16);
+#else
u16 checksum = ip_compute_csum(ee + i, 16);
+#endif
if ((checksum&0xff) + (checksum>>8) == 0xff)
break;
@@ -4595,6 +4813,122 @@ static void phytec_muxsel(struct bttv *btv, unsigned int input)
gpio_bits(0x3, mux);
}
+/*
+ * GeoVision GV-800(S) functions
+ * Bruno Christo <bchristo@inf.ufsm.br>
+*/
+
+/* This is a function to control the analog switch, which determines which
+ * camera is routed to which controller. The switch comprises an X-address
+ * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
+ * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
+ * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
+ * the switch. A STROBE bit (gpio bit 17) latches the data value into the
+ * specified address. There is also a chip select (gpio bit 16).
+ * The idea is to set the address and chip select together, bring
+ * STROBE high, write the data, and finally bring STROBE back to low.
+ */
+static void gv800s_write(struct bttv *btv,
+ unsigned char xaddr,
+ unsigned char yaddr,
+ unsigned char data) {
+ /* On the "master" 878A:
+ * GPIO bits 0-9 are used for the analog switch:
+ * 00 - 03: camera selector
+ * 04 - 06: 878A (controller) selector
+ * 16: cselect
+ * 17: strobe
+ * 18: data (1->on, 0->off)
+ * 19: reset
+ */
+ const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
+ const u32 CSELECT = 1<<16;
+ const u32 STROBE = 1<<17;
+ const u32 DATA = data<<18;
+
+ gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */
+ gpio_bits(0x20000, STROBE); /* STROBE high */
+ gpio_bits(0x40000, DATA); /* write DATA */
+ gpio_bits(0x20000, ~STROBE); /* STROBE low */
+}
+
+/*
+ * GeoVision GV-800(S) muxsel
+ *
+ * Each of the 4 cards (controllers) use this function.
+ * The controller using this function selects the input through the GPIO pins
+ * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
+ *
+ * The parameter 'input' is the requested camera number (0-4) on the controller.
+ * The map array has the address of each input. Note that the addresses in the
+ * array are in the sequence the original GeoVision driver uses, that is, set
+ * every controller to input 0, then to input 1, 2, 3, repeat. This means that
+ * the physical "camera 1" connector corresponds to controller 0 input 0,
+ * "camera 2" corresponds to controller 1 input 0, and so on.
+ *
+ * After getting the input address, the function then writes the appropriate
+ * data to the analog switch, and housekeeps the local copy of the switch
+ * information.
+ */
+static void gv800s_muxsel(struct bttv *btv, unsigned int input)
+{
+ struct bttv *mctlr;
+ char *sw_status;
+ int xaddr, yaddr;
+ static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
+ { 0x1, 0x5, 0xb, 0x7 },
+ { 0x2, 0x8, 0xc, 0xe },
+ { 0x3, 0x9, 0xd, 0xf } };
+ input = input%4;
+ mctlr = master[btv->c.nr];
+ if (mctlr == NULL) {
+ /* do nothing until the "master" is detected */
+ return;
+ }
+ yaddr = (btv->c.nr - mctlr->c.nr) & 3;
+ sw_status = (char *)(&mctlr->mbox_we);
+ xaddr = map[yaddr][input] & 0xf;
+
+ /* Check if the controller/camera pair has changed, ignore otherwise */
+ if (sw_status[yaddr] != xaddr) {
+ /* disable the old switch, enable the new one and save status */
+ gv800s_write(mctlr, sw_status[yaddr], yaddr, 0);
+ sw_status[yaddr] = xaddr;
+ gv800s_write(mctlr, xaddr, yaddr, 1);
+ }
+}
+
+/* GeoVision GV-800(S) "master" chip init */
+static void gv800s_init(struct bttv *btv)
+{
+ char *sw_status = (char *)(&btv->mbox_we);
+ int ix;
+
+ gpio_inout(0xf107f, 0xf107f);
+ gpio_write(1<<19); /* reset the analog MUX */
+ gpio_write(0);
+
+ /* Preset camera 0 to the 4 controllers */
+ for (ix = 0; ix < 4; ix++) {
+ sw_status[ix] = ix;
+ gv800s_write(btv, ix, ix, 1);
+ }
+
+ /* Inputs on the "master" controller need this brightness fix */
+ bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
+
+ if (btv->c.nr > BTTV_MAX-4)
+ return;
+ /*
+ * Store the "master" controller pointer in the master
+ * array for later use in the muxsel function.
+ */
+ master[btv->c.nr] = btv;
+ master[btv->c.nr+1] = btv;
+ master[btv->c.nr+2] = btv;
+ master[btv->c.nr+3] = btv;
+}
+
/* ----------------------------------------------------------------------- */
/* motherboard chipset specific stuff */
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-21 09:31:56 +0000