diff options
Diffstat (limited to 'linux/drivers/media/video/bt8xx')
| -rw-r--r-- | linux/drivers/media/video/bt8xx/bttv-audio-hook.c | 6 | ||||
| -rw-r--r-- | linux/drivers/media/video/bt8xx/bttv-cards.c | 26 |
2 files changed, 16 insertions, 16 deletions
diff --git a/linux/drivers/media/video/bt8xx/bttv-audio-hook.c b/linux/drivers/media/video/bt8xx/bttv-audio-hook.c index 67b634235..2364d1658 100644 --- a/linux/drivers/media/video/bt8xx/bttv-audio-hook.c +++ b/linux/drivers/media/video/bt8xx/bttv-audio-hook.c @@ -117,9 +117,9 @@ void gvbctv5pci_audio(struct bttv *btv, struct v4l2_tuner *t, int set) break; default: t->rxsubchans = V4L2_TUNER_SUB_MONO | - V4L2_TUNER_SUB_STEREO | - V4L2_TUNER_SUB_LANG1 | - V4L2_TUNER_SUB_LANG2; + V4L2_TUNER_SUB_STEREO | + V4L2_TUNER_SUB_LANG1 | + V4L2_TUNER_SUB_LANG2; } t->audmode = V4L2_TUNER_MODE_STEREO | V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2; diff --git a/linux/drivers/media/video/bt8xx/bttv-cards.c b/linux/drivers/media/video/bt8xx/bttv-cards.c index 798df8152..a2424738f 100644 --- a/linux/drivers/media/video/bt8xx/bttv-cards.c +++ b/linux/drivers/media/video/bt8xx/bttv-cards.c @@ -1279,7 +1279,7 @@ struct tvcard bttv_tvcards[] = { .has_radio = 1, }, [BTTV_BOARD_LIFETEC_9415] = { - /* Tim Röstermundt <rosterm@uni-muenster.de> + /* Tim Röstermundt <rosterm@uni-muenster.de> in de.comp.os.unix.linux.hardware: options bttv card=0 pll=1 radio=1 gpiomask=0x18e0 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff @@ -2856,7 +2856,7 @@ struct tvcard bttv_tvcards[] = { }, /* ---- card 0x8b ---------------------------------- */ [BTTV_BOARD_PV_M4900] = { - /* Sérgio Fortier <sergiofortier@yahoo.com.br> */ + /* SĂ©rgio Fortier <sergiofortier@yahoo.com.br> */ .name = "Prolink PixelView PlayTV MPEG2 PV-M4900", .video_inputs = 3, .audio_inputs = 1, @@ -4422,18 +4422,18 @@ void tea5757_set_freq(struct bttv *btv, unsigned short freq) * * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin. * GPIO pins are wired as: - * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler) - * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler) - * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler) - * GPIO[8] - - P3[5] (microcontroler) - * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler) - * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler) - * GPINTR - - P3[4] (microcontroler) + * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller) + * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller) + * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller) + * GPIO[8] - - P3[5] (microcontroller) + * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller) + * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller) + * GPINTR - - P3[4] (microcontroller) * - * The microcontroler is a 80C32 like. It should be possible to change xpoint - * configuration either directly (as we are doing) or using the microcontroler + * The microcontroller is a 80C32 like. It should be possible to change xpoint + * configuration either directly (as we are doing) or using the microcontroller * which is also wired to I2C interface. I have no further info on the - * microcontroler features, one would need to disassembly the firmware. + * microcontroller features, one would need to disassembly the firmware. * note: the vendor refused to give any information on this product, all * that stuff was found using a multimeter! :) */ @@ -4501,7 +4501,7 @@ static void tibetCS16_init(struct bttv *btv) * The analog switch is controlled by the "master", but the detection order * of the four BT878A chips is in an order which I just don't understand. * The "master" is actually the second controller to be detected. The - * logic on the board uses logical numbers for the 4 controlers, but + * logic on the board uses logical numbers for the 4 controllers, but * those numbers are different from the detection sequence. When working * with the analog switch, we need to "map" from the detection sequence * over to the board's logical controller number. This mapping sequence |