diff options
Diffstat (limited to 'linux/drivers/media/video/cx23885/cx23885-dvb.c')
-rw-r--r-- | linux/drivers/media/video/cx23885/cx23885-dvb.c | 80 |
1 files changed, 80 insertions, 0 deletions
diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c index eb3293789..ba120b9cf 100644 --- a/linux/drivers/media/video/cx23885/cx23885-dvb.c +++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c @@ -52,6 +52,7 @@ #include "cimax2.h" #include "netup-eeprom.h" #include "netup-init.h" +#include "lgdt3305.h" static unsigned int debug; @@ -128,6 +129,15 @@ static struct tda10048_config hauppauge_hvr1200_config = { .clk_freq_khz = TDA10048_CLK_16000, }; +static struct tda10048_config hauppauge_hvr1210_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_SERIAL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON, + .if_freq_khz = TDA10048_IF_4000, + .clk_freq_khz = TDA10048_CLK_16000, +}; + static struct s5h1409_config hauppauge_ezqam_config = { .demod_address = 0x32 >> 1, .output_mode = S5H1409_SERIAL_OUTPUT, @@ -197,6 +207,16 @@ static struct s5h1411_config dvico_s5h1411_config = { .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, }; +static struct s5h1411_config hcw_s5h1411_config = { + .output_mode = S5H1411_SERIAL_OUTPUT, + .gpio = S5H1411_GPIO_OFF, + .vsb_if = S5H1411_IF_44000, + .qam_if = S5H1411_IF_4000, + .inversion = S5H1411_INVERSION_ON, + .status_mode = S5H1411_DEMODLOCKING, + .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { .i2c_address = 0x61, .if_khz = 5380, @@ -227,6 +247,32 @@ static struct tda18271_config hauppauge_hvr1200_tuner_config = { .gate = TDA18271_GATE_ANALOG, }; +static struct tda18271_config hauppauge_hvr1210_tuner_config = { + .gate = TDA18271_GATE_DIGITAL, +}; + +static struct tda18271_std_map hauppauge_hvr127x_std_map = { + .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x58 }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x58 }, +}; + +static struct tda18271_config hauppauge_hvr127x_config = { + .std_map = &hauppauge_hvr127x_std_map, +}; + +static struct lgdt3305_config hauppauge_lgdt3305_config = { + .i2c_addr = 0x0e, + .mpeg_mode = LGDT3305_MPEG_SERIAL, + .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE, + .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, + .deny_i2c_rptr = 1, + .spectral_inversion = 1, + .qam_if_khz = 4000, + .vsb_if_khz = 3250, +}; + static struct dibx000_agc_config xc3028_agc_config = { BAND_VHF | BAND_UHF, /* band_caps */ @@ -399,6 +445,29 @@ static int dvb_register(struct cx23885_tsport *port) &hauppauge_generic_tunerconfig, 0); } break; + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1275: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(lgdt3305_attach, + &hauppauge_lgdt3305_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_hvr127x_config); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1255: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(s5h1411_attach, + &hcw_s5h1411_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_tda18271_config); + } + break; case CX23885_BOARD_HAUPPAUGE_HVR1800: i2c_bus = &dev->i2c_bus[0]; switch (alt_tuner) { @@ -499,6 +568,17 @@ static int dvb_register(struct cx23885_tsport *port) &hauppauge_hvr1200_tuner_config); } break; + case CX23885_BOARD_HAUPPAUGE_HVR1210: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(tda10048_attach, + &hauppauge_hvr1210_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_hvr1210_tuner_config); + } + break; case CX23885_BOARD_HAUPPAUGE_HVR1400: i2c_bus = &dev->i2c_bus[0]; fe0->dvb.frontend = dvb_attach(dib7000p_attach, |