summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/em28xx/em28xx-cards.c
diff options
context:
space:
mode:
Diffstat (limited to 'linux/drivers/media/video/em28xx/em28xx-cards.c')
-rw-r--r--linux/drivers/media/video/em28xx/em28xx-cards.c72
1 files changed, 72 insertions, 0 deletions
diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c
index 5b89c1821..16093680b 100644
--- a/linux/drivers/media/video/em28xx/em28xx-cards.c
+++ b/linux/drivers/media/video/em28xx/em28xx-cards.c
@@ -122,6 +122,24 @@ static struct em28xx_reg_seq em2870_kworld_355u_digital[] = {
};
#endif
+/* Board - EM2882 Kworld 315U digital */
+static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
+ {EM28XX_R08_GPIO, 0xff, 0xff, 10},
+ {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
+ {EM2880_R04_GPO, 0x04, 0xff, 10},
+ {EM2880_R04_GPO, 0x0c, 0xff, 10},
+ {EM28XX_R08_GPIO, 0x7e, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
+ {EM2880_R04_GPO, 0x08, 0xff, 10},
+ {EM2880_R04_GPO, 0x0c, 0xff, 10},
+ {EM2880_R04_GPO, 0x08, 0xff, 10},
+ {EM2880_R04_GPO, 0x0c, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
static struct em28xx_reg_seq kworld_330u_analog[] = {
{EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x00, 0xff, 10},
@@ -1160,6 +1178,38 @@ struct em28xx_board em28xx_boards[] = {
.gpio = default_analog,
} },
},
+ [EM2882_BOARD_KWORLD_ATSC_315U] = {
+ .name = "KWorld ATSC 315U HDTV TV Box",
+ .valid = EM28XX_BOARD_NOT_VALIDATED,
+ .tuner_type = TUNER_THOMSON_DTT761X,
+ .tuner_gpio = em2882_kworld_315u_tuner_gpio,
+ .tda9887_conf = TDA9887_PRESENT,
+ .decoder = EM28XX_SAA711X,
+ .has_dvb = 1,
+ .dvb_gpio = em2882_kworld_315u_digital,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
+ /* Analog mode - still not ready */
+ /*.input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = em2882_kworld_315u_analog,
+ .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+ }, {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = em2882_kworld_315u_analog1,
+ .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = em2882_kworld_315u_analog1,
+ .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
+ } }, */
+ },
[EM2880_BOARD_EMPIRE_DUAL_TV] = {
.name = "Empire dual TV",
.tuner_type = TUNER_XC2028,
@@ -1501,6 +1551,8 @@ struct usb_device_id em28xx_id_table[] = {
{ USB_DEVICE(0xeb1a, 0xe310),
.driver_info = EM2880_BOARD_KWORLD_DVB_310U },
#endif
+ { USB_DEVICE(0xeb1a, 0xa313),
+ .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
{ USB_DEVICE(0xeb1a, 0xa316),
.driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
{ USB_DEVICE(0xeb1a, 0xe320),
@@ -1770,6 +1822,17 @@ void em28xx_pre_card_setup(struct em28xx *dev)
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
break;
+ case EM2882_BOARD_KWORLD_ATSC_315U:
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
+ msleep(10);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
+ msleep(10);
+ em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
+ msleep(10);
+ em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
+ msleep(10);
+ break;
+
case EM2860_BOARD_KAIOMY_TVNPC_U2:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
@@ -2081,6 +2144,9 @@ void em28xx_card_setup(struct em28xx *dev)
if (em28xx_boards[dev->model].tuner_addr)
dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
+ if (em28xx_boards[dev->model].tda9887_conf)
+ dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
+
/* request some modules */
switch (dev->model) {
case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
@@ -2110,6 +2176,12 @@ void em28xx_card_setup(struct em28xx *dev)
#endif
break;
}
+ case EM2882_BOARD_KWORLD_ATSC_315U:
+ em28xx_write_reg(dev, 0x0d, 0x42);
+ msleep(10);
+ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
+ msleep(10);
+ break;
case EM2820_BOARD_KWORLD_PVRTV2800RF:
/* GPIO enables sound on KWORLD PVR TV 2800RF */
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);