diff options
Diffstat (limited to 'linux/drivers/media/video/em28xx/em28xx-cards.c')
| -rw-r--r-- | linux/drivers/media/video/em28xx/em28xx-cards.c | 71 |
1 files changed, 68 insertions, 3 deletions
diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c index 4f078da31..57c91838e 100644 --- a/linux/drivers/media/video/em28xx/em28xx-cards.c +++ b/linux/drivers/media/video/em28xx/em28xx-cards.c @@ -593,6 +593,7 @@ struct em28xx_board em28xx_boards[] = { .mts_firmware = 1, .has_12mhz_i2s = 1, .has_dvb = 1, + .ir_codes = ir_codes_hauppauge_new, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -616,6 +617,7 @@ struct em28xx_board em28xx_boards[] = { .mts_firmware = 1, .has_12mhz_i2s = 1, .has_dvb = 1, + .ir_codes = ir_codes_pinnacle_pctv_hd, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -639,6 +641,7 @@ struct em28xx_board em28xx_boards[] = { .mts_firmware = 1, .has_12mhz_i2s = 1, .has_dvb = 1, + .ir_codes = ir_codes_ati_tv_wonder_hd_600, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -1088,6 +1091,21 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_LINE_IN, } }, }, + [EM2874_BOARD_PINNACLE_PCTV_80E] = { + .name = "Pinnacle PCTV HD Mini", + .vchannels = 0, + .tuner_type = TUNER_ABSENT, + .has_dvb = 1, + .ir_codes = ir_codes_pinnacle_pctv_hd, + .decoder = EM28XX_NODECODER, +#ifdef DJH_DEBUG + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + } }, +#endif + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -1185,6 +1203,8 @@ struct usb_device_id em28xx_id_table [] = { .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO }, { USB_DEVICE(0x2304, 0x0227), .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, + { USB_DEVICE(0x2304, 0x023f), + .driver_info = EM2874_BOARD_PINNACLE_PCTV_80E }, { USB_DEVICE(0x0413, 0x6023), .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, { USB_DEVICE(0x093b, 0xa005), @@ -1260,6 +1280,17 @@ static struct em28xx_reg_seq em2882_terratec_hybrid_xs_digital[] = { { -1, -1, -1, -1}, }; +/* Pinnacle PCTV HD Mini (80e) GPIOs + 0-5: not used + 6: demod reset, active low + 7: LED on, active high */ +static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = { + {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/ + {EM2874_R80_GPIO, 0x80, 0xff, 100},/*Demod reset*/ + {EM2874_R80_GPIO, 0xc0, 0xff, 10}, + { -1, -1, -1, -1}, +}; + /* * EEPROM hash table for devices with generic USB IDs */ @@ -1307,6 +1338,7 @@ static void em28xx_set_model(struct em28xx *dev) dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480; dev->has_dvb = em28xx_boards[dev->model].has_dvb; dev->has_snapshot_button = em28xx_boards[dev->model].has_snapshot_button; + dev->ir_codes = em28xx_boards[dev->model].ir_codes; dev->valid = em28xx_boards[dev->model].valid; } @@ -1317,17 +1349,34 @@ void em28xx_pre_card_setup(struct em28xx *dev) { int rc; - rc = em28xx_read_reg(dev, EM2880_R04_GPO); - if (rc >= 0) - dev->reg_gpo = rc; + /* Set the default GPO/GPIO for legacy devices */ + dev->reg_gpo_num = EM2880_R04_GPO; + dev->reg_gpio_num = EM28XX_R08_GPIO; dev->wait_after_write = 5; + + /* Based on the Chip ID, set the device configuration */ rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); if (rc > 0) { + dev->chip_id = rc; switch (rc) { + case CHIP_ID_EM2750: + em28xx_info("chip ID is em2750\n"); + break; + case CHIP_ID_EM2820: + em28xx_info("chip ID is em2820\n"); + break; + case CHIP_ID_EM2840: + em28xx_info("chip ID is em2840\n"); + break; case CHIP_ID_EM2860: em28xx_info("chip ID is em2860\n"); break; + case CHIP_ID_EM2874: + em28xx_info("chip ID is em2874\n"); + dev->reg_gpio_num = EM2874_R80_GPIO; + dev->wait_after_write = 0; + break; case CHIP_ID_EM2883: em28xx_info("chip ID is em2882/em2883\n"); dev->wait_after_write = 0; @@ -1336,6 +1385,12 @@ void em28xx_pre_card_setup(struct em28xx *dev) em28xx_info("em28xx chip ID = %d\n", rc); } } + + /* Prepopulate cached GPO register content */ + rc = em28xx_read_reg(dev, dev->reg_gpo_num); + if (rc >= 0) + dev->reg_gpo = rc; + em28xx_set_model(dev); /* request some modules */ @@ -1509,6 +1564,13 @@ void em28xx_pre_card_setup(struct em28xx *dev) /* enables audio for that device */ em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1); break; + + case EM2874_BOARD_PINNACLE_PCTV_80E: + /* Set 400 KHz clock */ + em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x45", 1); + + dev->digital_gpio = em2874_pinnacle_80e_digital; + break; } em28xx_gpio_set(dev, dev->tun_analog_gpio); @@ -1717,6 +1779,7 @@ void em28xx_card_setup(struct em28xx *dev) em28xx_set_model(dev); dev->tuner_type = em28xx_boards[dev->model].tuner_type; + dev->tuner_addr = em28xx_boards[dev->model].tuner_addr; /* request some modules */ switch (dev->model) { @@ -1800,4 +1863,6 @@ void em28xx_card_setup(struct em28xx *dev) #endif em28xx_config_tuner(dev); + + em28xx_ir_init(dev); } |