summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
diff options
context:
space:
mode:
Diffstat (limited to 'linux/drivers/media/video')
-rw-r--r--linux/drivers/media/video/Kconfig12
-rw-r--r--linux/drivers/media/video/Makefile1
-rw-r--r--linux/drivers/media/video/compat_ioctl32.c32
-rw-r--r--linux/drivers/media/video/cx88/cx88-video.c4
-rw-r--r--linux/drivers/media/video/dsbr100.c431
-rw-r--r--linux/drivers/media/video/pwc/Kconfig2
-rw-r--r--linux/drivers/media/video/saa7134/Kconfig3
-rw-r--r--linux/drivers/media/video/saa7134/saa7134-cards.c38
-rw-r--r--linux/drivers/media/video/saa7134/saa7134-dvb.c19
-rw-r--r--linux/drivers/media/video/saa7134/saa7134-video.c2
-rw-r--r--linux/drivers/media/video/saa7134/saa7134.h1
-rw-r--r--linux/drivers/media/video/usbvideo/konicawc.c9
-rw-r--r--linux/drivers/media/video/v4l2-common.c6
-rw-r--r--linux/drivers/media/video/videodev.c2
-rw-r--r--linux/drivers/media/video/vivi.c4
15 files changed, 107 insertions, 459 deletions
diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig
index fe56862d5..732bf1e7c 100644
--- a/linux/drivers/media/video/Kconfig
+++ b/linux/drivers/media/video/Kconfig
@@ -449,18 +449,6 @@ source "drivers/media/video/pvrusb2/Kconfig"
source "drivers/media/video/em28xx/Kconfig"
-config USB_DSBR
- tristate "D-Link USB FM radio support (EXPERIMENTAL)"
- depends on USB && VIDEO_V4L1 && EXPERIMENTAL
- ---help---
- Say Y here if you want to connect this type of radio to your
- computer's USB port. Note that the audio is not digital, and
- you must connect the line out connector to a sound card or a
- set of speakers.
-
- To compile this driver as a module, choose M here: the
- module will be called dsbr100.
-
source "drivers/media/video/usbvideo/Kconfig"
source "drivers/media/video/et61x251/Kconfig"
diff --git a/linux/drivers/media/video/Makefile b/linux/drivers/media/video/Makefile
index 353d61cfa..010833d81 100644
--- a/linux/drivers/media/video/Makefile
+++ b/linux/drivers/media/video/Makefile
@@ -77,7 +77,6 @@ obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
obj-$(CONFIG_USB_DABUSB) += dabusb.o
-obj-$(CONFIG_USB_DSBR) += dsbr100.o
obj-$(CONFIG_USB_OV511) += ov511.o
obj-$(CONFIG_USB_SE401) += se401.o
obj-$(CONFIG_USB_STV680) += stv680.o
diff --git a/linux/drivers/media/video/compat_ioctl32.c b/linux/drivers/media/video/compat_ioctl32.c
index 0e8c63c18..8e80a76ec 100644
--- a/linux/drivers/media/video/compat_ioctl32.c
+++ b/linux/drivers/media/video/compat_ioctl32.c
@@ -23,7 +23,7 @@
#ifdef CONFIG_COMPAT
-
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
struct video_tuner32 {
compat_int_t tuner;
char name[32];
@@ -109,6 +109,7 @@ struct video_window32 {
compat_caddr_t clips;
compat_int_t clipcount;
};
+#endif
static int native_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
@@ -126,6 +127,7 @@ static int native_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
}
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
/* You get back everything except the clips... */
static int put_video_window32(struct video_window *kp, struct video_window32 __user *up)
{
@@ -140,6 +142,7 @@ static int put_video_window32(struct video_window *kp, struct video_window32 __u
return -EFAULT;
return 0;
}
+#endif
struct v4l2_clip32
{
@@ -492,6 +495,7 @@ static inline int put_v4l2_input(struct v4l2_input *kp, struct v4l2_input __user
return 0;
}
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
struct video_code32
{
char loadwhat[16]; /* name or tag of file being passed */
@@ -519,6 +523,8 @@ static inline int microcode32(struct video_code *kp, struct video_code32 __user
#define VIDIOCSFREQ32 _IOW('v',15, u32)
#define VIDIOCSMICROCODE32 _IOW('v',27, struct video_code32)
+#endif
+
/* VIDIOC_ENUMINPUT32 is VIDIOC_ENUMINPUT minus 4 bytes of padding alignement */
#define VIDIOC_ENUMINPUT32 VIDIOC_ENUMINPUT - _IOC(0, 0, 0, 4)
#define VIDIOC_G_FMT32 _IOWR ('V', 4, struct v4l2_format32)
@@ -539,6 +545,7 @@ static inline int microcode32(struct video_code *kp, struct video_code32 __user
#define VIDIOC_S_INPUT32 _IOWR ('V', 39, compat_int_t)
#define VIDIOC_TRY_FMT32 _IOWR ('V', 64, struct v4l2_format32)
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
enum {
MaxClips = (~0U-sizeof(struct video_window))/sizeof(struct video_clip)
};
@@ -603,14 +610,17 @@ static int do_set_window(struct file *file, unsigned int cmd, unsigned long arg)
return native_ioctl(file, VIDIOCSWIN, (unsigned long)vw);
}
+#endif
static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
union {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
struct video_tuner vt;
struct video_buffer vb;
struct video_window vw;
struct video_code vc;
+#endif
struct v4l2_format v2f;
struct v4l2_buffer v2b;
struct v4l2_framebuffer v2fb;
@@ -626,6 +636,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
/* First, convert the command. */
switch(cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCGTUNER32: cmd = VIDIOCGTUNER; break;
case VIDIOCSTUNER32: cmd = VIDIOCSTUNER; break;
case VIDIOCGWIN32: cmd = VIDIOCGWIN; break;
@@ -633,6 +644,8 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
case VIDIOCSFBUF32: cmd = VIDIOCSFBUF; break;
case VIDIOCGFREQ32: cmd = VIDIOCGFREQ; break;
case VIDIOCSFREQ32: cmd = VIDIOCSFREQ; break;
+ case VIDIOCSMICROCODE32: cmd = VIDIOCSMICROCODE; break;
+#endif
case VIDIOC_G_FMT32: cmd = VIDIOC_G_FMT; break;
case VIDIOC_S_FMT32: cmd = VIDIOC_S_FMT; break;
case VIDIOC_QUERYBUF32: cmd = VIDIOC_QUERYBUF; break;
@@ -649,10 +662,10 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
case VIDIOC_G_INPUT32: cmd = VIDIOC_G_INPUT; break;
case VIDIOC_S_INPUT32: cmd = VIDIOC_S_INPUT; break;
case VIDIOC_TRY_FMT32: cmd = VIDIOC_TRY_FMT; break;
- case VIDIOCSMICROCODE32: cmd = VIDIOCSMICROCODE; break;
};
switch(cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCSTUNER:
case VIDIOCGTUNER:
err = get_video_tuner32(&karg.vt, up);
@@ -666,6 +679,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
break;
case VIDIOCSFREQ:
+#endif
case VIDIOC_S_INPUT:
case VIDIOC_OVERLAY:
case VIDIOC_STREAMON:
@@ -719,18 +733,21 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
compatible_arg = 0;
break;
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCGWIN:
case VIDIOCGFBUF:
case VIDIOCGFREQ:
+#endif
case VIDIOC_G_FBUF:
case VIDIOC_G_INPUT:
compatible_arg = 0;
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCSMICROCODE:
err = microcode32(&karg.vc, up);
compatible_arg = 0;
break;
+#endif
};
-
if(err)
goto out;
@@ -745,6 +762,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
}
if(err == 0) {
switch(cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCGTUNER:
err = put_video_tuner32(&karg.vt, up);
break;
@@ -756,7 +774,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
case VIDIOCGFBUF:
err = put_video_buffer32(&karg.vb, up);
break;
-
+#endif
case VIDIOC_G_FBUF:
err = put_v4l2_framebuffer32(&karg.v2fb, up);
break;
@@ -794,7 +812,9 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
err = put_v4l2_input32(&karg.v2i, up);
break;
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCGFREQ:
+#endif
case VIDIOC_G_INPUT:
err = put_user(((u32)karg.vx), (u32 __user *)up);
break;
@@ -812,6 +832,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
return ret;
switch (cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCSWIN32:
ret = do_set_window(file, cmd, arg);
break;
@@ -822,6 +843,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
case VIDIOCSFBUF32:
case VIDIOCGFREQ32:
case VIDIOCSFREQ32:
+#endif
case VIDIOC_QUERYCAP:
case VIDIOC_ENUM_FMT:
case VIDIOC_G_FMT32:
@@ -853,6 +875,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
ret = do_video_ioctl(file, cmd, arg);
break;
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
/* Little v, the video4linux ioctls (conflict?) */
case VIDIOCGCAP:
case VIDIOCGCHAN:
@@ -881,6 +904,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
case _IOR('v' , BASE_VIDIOCPRIVATE+7, int):
ret = native_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
break;
+#endif
default:
v4l_print_ioctl("compat_ioctl32", cmd);
}
diff --git a/linux/drivers/media/video/cx88/cx88-video.c b/linux/drivers/media/video/cx88/cx88-video.c
index b8793928a..1aef0005e 100644
--- a/linux/drivers/media/video/cx88/cx88-video.c
+++ b/linux/drivers/media/video/cx88/cx88-video.c
@@ -1484,7 +1484,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file,
struct v4l2_format *f = arg;
return cx8800_try_fmt(dev,fh,f);
}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
/* --- streaming capture ------------------------------------- */
case VIDIOCGMBUF:
{
@@ -1873,7 +1873,7 @@ static int radio_do_ioctl(struct inode *inode, struct file *file,
*id = 0;
return 0;
}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCSTUNER:
{
struct video_tuner *v = arg;
diff --git a/linux/drivers/media/video/dsbr100.c b/linux/drivers/media/video/dsbr100.c
deleted file mode 100644
index 45d2b5028..000000000
--- a/linux/drivers/media/video/dsbr100.c
+++ /dev/null
@@ -1,431 +0,0 @@
-/* A driver for the D-Link DSB-R100 USB radio. The R100 plugs
- into both the USB and an analog audio input, so this thing
- only deals with initialisation and frequency setting, the
- audio data has to be handled by a sound driver.
-
- Major issue: I can't find out where the device reports the signal
- strength, and indeed the windows software appearantly just looks
- at the stereo indicator as well. So, scanning will only find
- stereo stations. Sad, but I can't help it.
-
- Also, the windows program sends oodles of messages over to the
- device, and I couldn't figure out their meaning. My suspicion
- is that they don't have any:-)
-
- You might find some interesting stuff about this module at
- http://unimut.fsk.uni-heidelberg.de/unimut/demi/dsbr
-
- Copyright (c) 2000 Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
- History:
-
- Version 0.40:
- Markus: Updates for 2.6.x kernels, code layout changes, name sanitizing
-
- Version 0.30:
- Markus: Updates for 2.5.x kernel and more ISO compliant source
-
- Version 0.25:
- PSL and Markus: Cleanup, radio now doesn't stop on device close
-
- Version 0.24:
- Markus: Hope I got these silly VIDEO_TUNER_LOW issues finally
- right. Some minor cleanup, improved standalone compilation
-
- Version 0.23:
- Markus: Sign extension bug fixed by declaring transfer_buffer unsigned
-
- Version 0.22:
- Markus: Some (brown bag) cleanup in what VIDIOCSTUNER returns,
- thanks to Mike Cox for pointing the problem out.
-
- Version 0.21:
- Markus: Minor cleanup, warnings if something goes wrong, lame attempt
- to adhere to Documentation/CodingStyle
-
- Version 0.2:
- Brad Hards <bradh@dynamite.com.au>: Fixes to make it work as non-module
- Markus: Copyright clarification
-
- Version 0.01: Markus: initial release
-
-*/
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include "compat.h"
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <linux/usb.h>
-#include <linux/smp_lock.h>
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.40"
-#define DRIVER_AUTHOR "Markus Demleitner <msdemlei@tucana.harvard.edu>"
-#define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver"
-
-#define DSB100_VENDOR 0x04b4
-#define DSB100_PRODUCT 0x1002
-
-/* Commands the device appears to understand */
-#define DSB100_TUNE 1
-#define DSB100_ONOFF 2
-
-#define TB_LEN 16
-
-/* Frequency limits in MHz -- these are European values. For Japanese
-devices, that would be 76 and 91. */
-#define FREQ_MIN 87.5
-#define FREQ_MAX 108.0
-#define FREQ_MUL 16000
-
-
-static int usb_dsbr100_probe(struct usb_interface *intf,
- const struct usb_device_id *id);
-static void usb_dsbr100_disconnect(struct usb_interface *intf);
-static int usb_dsbr100_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg);
-static int usb_dsbr100_open(struct inode *inode, struct file *file);
-static int usb_dsbr100_close(struct inode *inode, struct file *file);
-
-static int radio_nr = -1;
-module_param(radio_nr, int, 0);
-
-/* Data for one (physical) device */
-typedef struct {
- struct usb_device *usbdev;
- struct video_device *videodev;
- unsigned char transfer_buffer[TB_LEN];
- int curfreq;
- int stereo;
- int users;
- int removed;
-} dsbr100_device;
-
-
-/* File system interface */
-static struct file_operations usb_dsbr100_fops = {
- .owner = THIS_MODULE,
- .open = usb_dsbr100_open,
- .release = usb_dsbr100_close,
- .ioctl = usb_dsbr100_ioctl,
- .compat_ioctl = v4l_compat_ioctl32,
- .llseek = no_llseek,
-};
-
-/* V4L interface */
-static struct video_device dsbr100_videodev_template=
-{
- .owner = THIS_MODULE,
- .name = "D-Link DSB-R 100",
- .type = VID_TYPE_TUNER,
- .hardware = VID_HARDWARE_AZTECH,
- .fops = &usb_dsbr100_fops,
- .release = video_device_release,
-};
-
-static struct usb_device_id usb_dsbr100_device_table [] = {
- { USB_DEVICE(DSB100_VENDOR, DSB100_PRODUCT) },
- { } /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, usb_dsbr100_device_table);
-
-/* USB subsystem interface */
-static struct usb_driver usb_dsbr100_driver = {
- .name = "dsbr100",
- .probe = usb_dsbr100_probe,
- .disconnect = usb_dsbr100_disconnect,
- .id_table = usb_dsbr100_device_table,
-};
-
-/* Low-level device interface begins here */
-
-/* switch on radio */
-static int dsbr100_start(dsbr100_device *radio)
-{
- if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- USB_REQ_GET_STATUS,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x00, 0xC7, radio->transfer_buffer, 8, 300)<0 ||
- usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- DSB100_ONOFF,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x01, 0x00, radio->transfer_buffer, 8, 300)<0)
- return -1;
- return (radio->transfer_buffer)[0];
-}
-
-
-/* switch off radio */
-static int dsbr100_stop(dsbr100_device *radio)
-{
- if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- USB_REQ_GET_STATUS,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x16, 0x1C, radio->transfer_buffer, 8, 300)<0 ||
- usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- DSB100_ONOFF,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x00, 0x00, radio->transfer_buffer, 8, 300)<0)
- return -1;
- return (radio->transfer_buffer)[0];
-}
-
-/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */
-static int dsbr100_setfreq(dsbr100_device *radio, int freq)
-{
- freq = (freq/16*80)/1000+856;
- if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- DSB100_TUNE,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- (freq>>8)&0x00ff, freq&0xff,
- radio->transfer_buffer, 8, 300)<0 ||
- usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- USB_REQ_GET_STATUS,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x96, 0xB7, radio->transfer_buffer, 8, 300)<0 ||
- usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- USB_REQ_GET_STATUS,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x00, 0x24, radio->transfer_buffer, 8, 300)<0) {
- radio->stereo = -1;
- return -1;
- }
- radio->stereo = ! ((radio->transfer_buffer)[0]&0x01);
- return (radio->transfer_buffer)[0];
-}
-
-/* return the device status. This is, in effect, just whether it
-sees a stereo signal or not. Pity. */
-static void dsbr100_getstat(dsbr100_device *radio)
-{
- if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- USB_REQ_GET_STATUS,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x00 , 0x24, radio->transfer_buffer, 8, 300)<0)
- radio->stereo = -1;
- else
- radio->stereo = ! (radio->transfer_buffer[0]&0x01);
-}
-
-
-/* USB subsystem interface begins here */
-
-/* check if the device is present and register with v4l and
-usb if it is */
-static int usb_dsbr100_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- dsbr100_device *radio;
-
- if (!(radio = kmalloc(sizeof(dsbr100_device), GFP_KERNEL)))
- return -ENOMEM;
- if (!(radio->videodev = video_device_alloc())) {
- kfree(radio);
- return -ENOMEM;
- }
- memcpy(radio->videodev, &dsbr100_videodev_template,
- sizeof(dsbr100_videodev_template));
- radio->removed = 0;
- radio->users = 0;
- radio->usbdev = interface_to_usbdev(intf);
- radio->curfreq = FREQ_MIN*FREQ_MUL;
- video_set_drvdata(radio->videodev, radio);
- if (video_register_device(radio->videodev, VFL_TYPE_RADIO,
- radio_nr)) {
- warn("Could not register video device");
- video_device_release(radio->videodev);
- kfree(radio);
- return -EIO;
- }
- usb_set_intfdata(intf, radio);
- return 0;
-}
-
-/* handle unplugging of the device, release data structures
-if nothing keeps us from doing it. If something is still
-keeping us busy, the release callback of v4l will take care
-of releasing it. stv680.c does not relase its private
-data, so I don't do this here either. Checking out the
-code I'd expect I better did that, but if there's a memory
-leak here it's tiny (~50 bytes per disconnect) */
-static void usb_dsbr100_disconnect(struct usb_interface *intf)
-{
- dsbr100_device *radio = usb_get_intfdata(intf);
-
- usb_set_intfdata (intf, NULL);
- if (radio) {
- video_unregister_device(radio->videodev);
- radio->videodev = NULL;
- if (radio->users) {
- kfree(radio);
- } else {
- radio->removed = 1;
- }
- }
-}
-
-
-/* Video for Linux interface */
-
-static int usb_dsbr100_do_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, void *arg)
-{
- dsbr100_device *radio=video_get_drvdata(video_devdata(file));
-
- if (!radio)
- return -EIO;
-
- switch(cmd) {
- case VIDIOCGCAP: {
- struct video_capability *v = arg;
-
- memset(v, 0, sizeof(*v));
- v->type = VID_TYPE_TUNER;
- v->channels = 1;
- v->audios = 1;
- strcpy(v->name, "D-Link R-100 USB FM Radio");
- return 0;
- }
- case VIDIOCGTUNER: {
- struct video_tuner *v = arg;
-
- dsbr100_getstat(radio);
- if(v->tuner) /* Only 1 tuner */
- return -EINVAL;
- v->rangelow = FREQ_MIN*FREQ_MUL;
- v->rangehigh = FREQ_MAX*FREQ_MUL;
- v->flags = VIDEO_TUNER_LOW;
- v->mode = VIDEO_MODE_AUTO;
- v->signal = radio->stereo*0x7000;
- /* Don't know how to get signal strength */
- v->flags |= VIDEO_TUNER_STEREO_ON*radio->stereo;
- strcpy(v->name, "DSB R-100");
- return 0;
- }
- case VIDIOCSTUNER: {
- struct video_tuner *v = arg;
-
- if(v->tuner!=0)
- return -EINVAL;
- /* Only 1 tuner so no setting needed ! */
- return 0;
- }
- case VIDIOCGFREQ: {
- int *freq = arg;
-
- if (radio->curfreq==-1)
- return -EINVAL;
- *freq = radio->curfreq;
- return 0;
- }
- case VIDIOCSFREQ: {
- int *freq = arg;
-
- radio->curfreq = *freq;
- if (dsbr100_setfreq(radio, radio->curfreq)==-1)
- warn("Set frequency failed");
- return 0;
- }
- case VIDIOCGAUDIO: {
- struct video_audio *v = arg;
-
- memset(v, 0, sizeof(*v));
- v->flags |= VIDEO_AUDIO_MUTABLE;
- v->mode = VIDEO_SOUND_STEREO;
- v->volume = 1;
- v->step = 1;
- strcpy(v->name, "Radio");
- return 0;
- }
- case VIDIOCSAUDIO: {
- struct video_audio *v = arg;
-
- if (v->audio)
- return -EINVAL;
- if (v->flags&VIDEO_AUDIO_MUTE) {
- if (dsbr100_stop(radio)==-1)
- warn("Radio did not respond properly");
- }
- else
- if (dsbr100_start(radio)==-1)
- warn("Radio did not respond properly");
- return 0;
- }
- default:
- return -ENOIOCTLCMD;
- }
-}
-
-static int usb_dsbr100_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- return video_usercopy(inode, file, cmd, arg, usb_dsbr100_do_ioctl);
-}
-
-static int usb_dsbr100_open(struct inode *inode, struct file *file)
-{
- dsbr100_device *radio=video_get_drvdata(video_devdata(file));
-
- radio->users = 1;
- if (dsbr100_start(radio)<0) {
- warn("Radio did not start up properly");
- radio->users = 0;
- return -EIO;
- }
- dsbr100_setfreq(radio, radio->curfreq);
- return 0;
-}
-
-static int usb_dsbr100_close(struct inode *inode, struct file *file)
-{
- dsbr100_device *radio=video_get_drvdata(video_devdata(file));
-
- if (!radio)
- return -ENODEV;
- radio->users = 0;
- if (radio->removed) {
- kfree(radio);
- }
- return 0;
-}
-
-static int __init dsbr100_init(void)
-{
- int retval = usb_register(&usb_dsbr100_driver);
- info(DRIVER_VERSION ":" DRIVER_DESC);
- return retval;
-}
-
-static void __exit dsbr100_exit(void)
-{
- usb_deregister(&usb_dsbr100_driver);
-}
-
-module_init (dsbr100_init);
-module_exit (dsbr100_exit);
-
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_LICENSE("GPL");
diff --git a/linux/drivers/media/video/pwc/Kconfig b/linux/drivers/media/video/pwc/Kconfig
index 697145e0b..8fdf7101d 100644
--- a/linux/drivers/media/video/pwc/Kconfig
+++ b/linux/drivers/media/video/pwc/Kconfig
@@ -30,7 +30,7 @@ config USB_PWC
config USB_PWC_DEBUG
bool "USB Philips Cameras verbose debug"
- depends USB_PWC
+ depends on USB_PWC
help
Say Y here in order to have the pwc driver generate verbose debugging
messages.
diff --git a/linux/drivers/media/video/saa7134/Kconfig b/linux/drivers/media/video/saa7134/Kconfig
index 7c626cc1d..561599999 100644
--- a/linux/drivers/media/video/saa7134/Kconfig
+++ b/linux/drivers/media/video/saa7134/Kconfig
@@ -43,6 +43,9 @@ config VIDEO_SAA7134_DVB
select DVB_MT352 if !DVB_FE_CUSTOMISE
select DVB_TDA1004X if !DVB_FE_CUSTOMISE
select DVB_NXT200X if !DVB_FE_CUSTOMISE
+ select DVB_TDA10086 if !DVB_FE_CUSTOMISE
+ select DVB_TDA826X if !DVB_FE_CUSTOMISE
+ select DVB_ISL6421 if !DVB_FE_CUSTOMISE
---help---
This adds support for DVB cards based on the
Philips saa7134 chip.
diff --git a/linux/drivers/media/video/saa7134/saa7134-cards.c b/linux/drivers/media/video/saa7134/saa7134-cards.c
index f1bdc1eab..4d2acfa48 100644
--- a/linux/drivers/media/video/saa7134/saa7134-cards.c
+++ b/linux/drivers/media/video/saa7134/saa7134-cards.c
@@ -2954,6 +2954,27 @@ struct saa7134_board saa7134_boards[] = {
.amux = LINE2,
}},
},
+ [SAA7134_BOARD_FLYDVBS_LR300] = {
+ /* LifeView FlyDVB-s */
+ /* Igor M. Liplianin <liplianin@tut.by> */
+ .name = "LifeView FlyDVB-S /Acorp TV134DS",
+ .audio_clock = 0x00200000,
+ .tuner_type = TUNER_ABSENT,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_comp1, /* Composite input */
+ .vmux = 3,
+ .amux = LINE1,
+ },{
+ .name = name_svideo, /* S-Video signal on S-Video input */
+ .vmux = 8,
+ .amux = LINE1,
+ }},
+ },
+
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -3485,6 +3506,18 @@ struct pci_device_id saa7134_pci_tbl[] = {
.subdevice = 0x0005,
.driver_data = SAA7134_BOARD_MD7134_BRIDGE_2,
},{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7134,
+ .subvendor = 0x5168,
+ .subdevice = 0x0300,
+ .driver_data = SAA7134_BOARD_FLYDVBS_LR300,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7134,
+ .subvendor = 0x4e42,
+ .subdevice = 0x0300,/* LR300 */
+ .driver_data = SAA7134_BOARD_FLYDVBS_LR300,
+ },{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
.subvendor = 0x1489,
@@ -3674,6 +3707,11 @@ int saa7134_board_init1(struct saa7134_dev *dev)
case SAA7134_BOARD_FLYDVBTDUO:
dev->has_remote = SAA7134_REMOTE_GPIO;
break;
+ case SAA7134_BOARD_FLYDVBS_LR300:
+ saa_writeb(SAA7134_GPIO_GPMODE3, 0x80);
+ saa_writeb(SAA7134_GPIO_GPSTATUS2, 0x40);
+ dev->has_remote = SAA7134_REMOTE_GPIO;
+ break;
case SAA7134_BOARD_MD5044:
printk("%s: seems there are two different versions of the MD5044\n"
"%s: (with the same ID) out there. If sound doesn't work for\n"
diff --git a/linux/drivers/media/video/saa7134/saa7134-dvb.c b/linux/drivers/media/video/saa7134/saa7134-dvb.c
index 10253c935..a881085af 100644
--- a/linux/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/linux/drivers/media/video/saa7134/saa7134-dvb.c
@@ -40,6 +40,9 @@
#include "tda1004x.h"
#include "nxt200x.h"
+#include "tda10086.h"
+#include "tda826x.h"
+#include "isl6421.h"
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
MODULE_LICENSE("GPL");
@@ -1003,6 +1006,11 @@ static struct tda1004x_config md8800_dvbt_config = {
.request_firmware = NULL,
};
+static struct tda10086_config flydvbs = {
+ .demod_address = 0x0e,
+ .invert = 0,
+};
+
/* ------------------------------------------------------------------ */
static struct nxt200x_config avertvhda180 = {
@@ -1200,6 +1208,17 @@ static int dvb_init(struct saa7134_dev *dev)
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, &dev->i2c_adap, &dvb_pll_tuv1236d);
}
break;
+ case SAA7134_BOARD_FLYDVBS_LR300:
+ dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
+ if (dev->dvb.frontend) {
+ if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60, &dev->i2c_adap, 0) == NULL) {
+ printk("%s: No tda826x found!\n", __FUNCTION__);
+ }
+ if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap, 0x08, 0, 0) == NULL) {
+ printk("%s: No ISL6421 found!\n", __FUNCTION__);
+ }
+ }
+ break;
default:
printk("%s: Huh? unknown DVB card?\n",dev->name);
break;
diff --git a/linux/drivers/media/video/saa7134/saa7134-video.c b/linux/drivers/media/video/saa7134/saa7134-video.c
index bca987bef..3a2fde062 100644
--- a/linux/drivers/media/video/saa7134/saa7134-video.c
+++ b/linux/drivers/media/video/saa7134/saa7134-video.c
@@ -2095,7 +2095,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file,
struct v4l2_format *f = arg;
return saa7134_try_fmt(dev,fh,f);
}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case VIDIOCGMBUF:
{
struct video_mbuf *mbuf = arg;
diff --git a/linux/drivers/media/video/saa7134/saa7134.h b/linux/drivers/media/video/saa7134/saa7134.h
index b5eed7a9e..a913b6e28 100644
--- a/linux/drivers/media/video/saa7134/saa7134.h
+++ b/linux/drivers/media/video/saa7134/saa7134.h
@@ -233,6 +233,7 @@ struct saa7134_format {
#define SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS 94
#define SAA7134_BOARD_FLYVIDEO3000_NTSC 95
#define SAA7134_BOARD_MEDION_MD8800_QUADRO 96
+#define SAA7134_BOARD_FLYDVBS_LR300 97
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
diff --git a/linux/drivers/media/video/usbvideo/konicawc.c b/linux/drivers/media/video/usbvideo/konicawc.c
index 1feaf5f0b..8c0e25fde 100644
--- a/linux/drivers/media/video/usbvideo/konicawc.c
+++ b/linux/drivers/media/video/usbvideo/konicawc.c
@@ -228,6 +228,7 @@ static void konicawc_adjust_picture(struct uvd *uvd)
static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev)
{
struct input_dev *input_dev;
+ int error;
usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname));
strncat(cam->input_physname, "/input0", sizeof(cam->input_physname));
@@ -248,7 +249,13 @@ static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev
input_dev->private = cam;
- input_register_device(cam->input);
+ error = input_register_device(cam->input);
+ if (error) {
+ warn("Failed to register camera's input device, err: %d\n",
+ error);
+ input_free_device(cam->input);
+ cam->input = NULL;
+ }
}
static void konicawc_unregister_input(struct konicawc *cam)
diff --git a/linux/drivers/media/video/v4l2-common.c b/linux/drivers/media/video/v4l2-common.c
index deb2a98c9..47b932809 100644
--- a/linux/drivers/media/video/v4l2-common.c
+++ b/linux/drivers/media/video/v4l2-common.c
@@ -220,7 +220,7 @@ static char *v4l2_memory_names[] = {
/* ------------------------------------------------------------------ */
/* debug help functions */
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
static const char *v4l1_ioctls[] = {
[_IOC_NR(VIDIOCGCAP)] = "VIDIOCGCAP",
[_IOC_NR(VIDIOCGCHAN)] = "VIDIOCGCHAN",
@@ -321,7 +321,7 @@ static const char *v4l2_ioctls[] = {
#define V4L2_IOCTLS ARRAY_SIZE(v4l2_ioctls)
static const char *v4l2_int_ioctls[] = {
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
[_IOC_NR(DECODER_GET_CAPABILITIES)] = "DECODER_GET_CAPABILITIES",
[_IOC_NR(DECODER_GET_STATUS)] = "DECODER_GET_STATUS",
[_IOC_NR(DECODER_SET_NORM)] = "DECODER_SET_NORM",
@@ -387,7 +387,7 @@ void v4l_printk_ioctl(unsigned int cmd)
(_IOC_NR(cmd) < V4L2_INT_IOCTLS) ?
v4l2_int_ioctls[_IOC_NR(cmd)] : "UNKNOWN", dir, cmd);
break;
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
case 'v':
printk("v4l1 ioctl %s, dir=%s (0x%08x)\n",
(_IOC_NR(cmd) < V4L1_IOCTLS) ?
diff --git a/linux/drivers/media/video/videodev.c b/linux/drivers/media/video/videodev.c
index 4ac9eb21a..b5fd2eabf 100644
--- a/linux/drivers/media/video/videodev.c
+++ b/linux/drivers/media/video/videodev.c
@@ -779,7 +779,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file,
ret=vfd->vidioc_overlay(file, fh, *i);
break;
}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
/* --- streaming capture ------------------------------------- */
case VIDIOCGMBUF:
{
diff --git a/linux/drivers/media/video/vivi.c b/linux/drivers/media/video/vivi.c
index 0a75f4bda..de72ebf74 100644
--- a/linux/drivers/media/video/vivi.c
+++ b/linux/drivers/media/video/vivi.c
@@ -1062,7 +1062,7 @@ static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *p)
file->f_flags & O_NONBLOCK));
}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf)
{
struct vivi_fh *fh=priv;
@@ -1410,7 +1410,7 @@ static struct video_device vivi = {
.vidioc_s_ctrl = vidioc_s_ctrl,
.vidioc_streamon = vidioc_streamon,
.vidioc_streamoff = vidioc_streamoff,
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
.vidiocgmbuf = vidiocgmbuf,
#endif
.tvnorms = tvnorms,
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-24 13:07:06 +0000