summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
diff options
context:
space:
mode:
Diffstat (limited to 'linux/drivers/media/video')
-rw-r--r--linux/drivers/media/video/Kconfig1
-rw-r--r--linux/drivers/media/video/arv.c12
-rw-r--r--linux/drivers/media/video/cx2341x.c5
-rw-r--r--linux/drivers/media/video/cx23885/cx23885-cards.c46
-rw-r--r--linux/drivers/media/video/cx23885/cx23885-dvb.c76
-rw-r--r--linux/drivers/media/video/cx23885/cx23885.h1
-rw-r--r--linux/drivers/media/video/ivtv/ivtv-version.h2
-rw-r--r--linux/drivers/media/video/mxb.c13
-rw-r--r--linux/drivers/media/video/saa7134/saa6752hs.c322
-rw-r--r--linux/drivers/media/video/saa7134/saa7134-empress.c22
-rw-r--r--linux/drivers/media/video/tda9840.c170
-rw-r--r--linux/drivers/media/video/tea6415c.c135
-rw-r--r--linux/drivers/media/video/tea6420.c151
-rw-r--r--linux/drivers/media/video/v4l2-common.c180
-rw-r--r--linux/drivers/media/video/v4l2-ioctl.c2
15 files changed, 618 insertions, 520 deletions
diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig
index d6b1a106a..4c96b690a 100644
--- a/linux/drivers/media/video/Kconfig
+++ b/linux/drivers/media/video/Kconfig
@@ -34,6 +34,7 @@ config VIDEOBUF_DVB
select VIDEOBUF_GEN
config VIDEO_BTCX
+ depends on PCI
tristate
config VIDEO_IR
diff --git a/linux/drivers/media/video/arv.c b/linux/drivers/media/video/arv.c
index e100d4cfb..9e96e7773 100644
--- a/linux/drivers/media/video/arv.c
+++ b/linux/drivers/media/video/arv.c
@@ -39,7 +39,7 @@
#include <asm/dma.h>
#include <asm/byteorder.h>
-#if 0 /* keep */;
+#if 0 /* keep */
#define DEBUG(n, args...) printk(args)
#define CHECK_LOST 1
#else
@@ -579,11 +579,11 @@ static void ar_interrupt(int irq, void *dev)
* we have to start capture.
*/
disable_dma();
-#if 0 /* keep */;
+#if 0 /* keep */
ar_outl(ar->line_buff, M32R_DMA0CDA_PORTL); /* needless? */
#endif
memcpy(ar->frame[0], ar->line_buff, ar->line_bytes);
-#if 0 /* keep */;
+#if 0 /* keep */
ar_outl(0xa1861300, M32R_DMA0CR0_PORTL);
#endif
enable_dma();
@@ -609,7 +609,7 @@ static void ar_interrupt(int irq, void *dev)
ar_outl(arvcr1, ARVCR1); /* disable */
wake_up_interruptible(&ar->wait);
} else {
-#if 0 /* keep */;
+#if 0 /* keep */
ar_outl(ar->line_buff, M32R_DMA0CDA_PORTL);
ar_outl(0xa1861300, M32R_DMA0CR0_PORTL);
#endif
@@ -693,7 +693,7 @@ static int ar_initialize(struct video_device *dev)
printk(".");
iic(2,0x78,0x8e,0x0c,0x00);
iic(2,0x78,0x8f,0x00,0x00);
-#if 0 /* keep */;
+#if 0 /* keep */
iic(2,0x78,0x90,0x00,0x00); /* AWB on=1 off=0 */
#endif
iic(2,0x78,0x93,0x01,0x00);
@@ -712,7 +712,7 @@ static int ar_initialize(struct video_device *dev)
iic(2,0x78,0x9e,0x2e,0x00);
iic(2,0x78,0xb8,0x78,0x00);
iic(2,0x78,0xba,0x05,0x00);
-#if 0 /* keep */;
+#if 0 /* keep */
iic(2,0x78,0x83,0x8c,0x00); /* brightness */
#endif
printk(".");
diff --git a/linux/drivers/media/video/cx2341x.c b/linux/drivers/media/video/cx2341x.c
index 835062f5b..f31f11e3f 100644
--- a/linux/drivers/media/video/cx2341x.c
+++ b/linux/drivers/media/video/cx2341x.c
@@ -509,7 +509,10 @@ int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params,
/* this setting is read-only for the cx2341x since the
V4L2_CID_MPEG_STREAM_TYPE really determines the
MPEG-1/2 setting */
- err = v4l2_ctrl_query_fill_std(qctrl);
+ err = v4l2_ctrl_query_fill(qctrl,
+ V4L2_MPEG_VIDEO_ENCODING_MPEG_1,
+ V4L2_MPEG_VIDEO_ENCODING_MPEG_2, 1,
+ V4L2_MPEG_VIDEO_ENCODING_MPEG_2);
if (err == 0)
qctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
return err;
diff --git a/linux/drivers/media/video/cx23885/cx23885-cards.c b/linux/drivers/media/video/cx23885/cx23885-cards.c
index ee01ff8bf..f7cb19256 100644
--- a/linux/drivers/media/video/cx23885/cx23885-cards.c
+++ b/linux/drivers/media/video/cx23885/cx23885-cards.c
@@ -27,6 +27,7 @@
#include "compat.h"
#include "cx23885.h"
+#include "tuner-xc2028.h"
/* ------------------------------------------------------------------ */
/* board config info */
@@ -149,6 +150,11 @@ struct cx23885_board cx23885_boards[] = {
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP] = {
+ .name = "DViCO FusionHDTV DVB-T Dual Express",
+ .portb = CX23885_MPEG_DVB,
+ .portc = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -220,6 +226,10 @@ struct cx23885_subid cx23885_subids[] = {
.subvendor = 0x18ac,
.subdevice = 0xd618,
.card = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP,
+ },{
+ .subvendor = 0x18ac,
+ .subdevice = 0xdb78,
+ .card = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -320,15 +330,15 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
dev->name, tv.model);
}
-/* Tuner callback function for cx23885 boards. Currently only needed
- * for HVR1500Q, which has an xc5000 tuner.
- */
int cx23885_tuner_callback(void *priv, int command, int arg)
{
- struct cx23885_i2c *bus = priv;
- struct cx23885_dev *dev = bus->dev;
+ struct cx23885_tsport *port = priv;
+ struct cx23885_dev *dev = port->dev;
u32 bitmask = 0;
+ if (command == XC2028_RESET_CLK)
+ return 0;
+
if (command != 0) {
printk(KERN_ERR "%s(): Unknown command 0x%x.\n",
__func__, command);
@@ -336,19 +346,22 @@ int cx23885_tuner_callback(void *priv, int command, int arg)
}
switch(dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1400:
+ case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
- /* Tuner Reset Command from xc5000 */
+ /* Tuner Reset Command */
if (command == 0)
bitmask = 0x04;
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+ case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
if (command == 0) {
/* Two identical tuners on two different i2c buses,
* we need to reset the correct gpio. */
- if (bus->nr == 0)
+ if (port->nr == 0)
bitmask = 0x01;
- else if (bus->nr == 1)
+ else if (port->nr == 1)
bitmask = 0x04;
}
break;
@@ -466,6 +479,19 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
mdelay(20);
cx_set(GP0_IO, 0x000f000f);
break;
+ case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
+ /* GPIO-0 portb xc3028 reset */
+ /* GPIO-1 portb zl10353 reset */
+ /* GPIO-2 portc xc3028 reset */
+ /* GPIO-3 portc zl10353 reset */
+
+ /* Put the parts into reset and back */
+ cx_set(GP0_IO, 0x000f0000);
+ mdelay(20);
+ cx_clear(GP0_IO, 0x0000000f);
+ mdelay(20);
+ cx_set(GP0_IO, 0x000f000f);
+ break;
}
}
@@ -480,6 +506,9 @@ int cx23885_ir_init(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1400:
/* FIXME: Implement me */
break;
+ case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
+ request_module("ir-kbd-i2c");
+ break;
}
return 0;
@@ -517,6 +546,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
switch (dev->board) {
case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+ case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c
index 3c01ef2bf..c0c5b5be7 100644
--- a/linux/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c
@@ -43,6 +43,7 @@
#include "tuner-simple.h"
#include "dib7000p.h"
#include "dibx000_common.h"
+#include "zl10353.h"
static unsigned int debug;
@@ -189,13 +190,13 @@ static struct s5h1411_config dvico_s5h1411_config = {
static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {
.i2c_address = 0x61,
.if_khz = 5380,
- .tuner_callback = cx23885_tuner_callback
+ .tuner_callback = cx23885_tuner_callback,
};
static struct xc5000_config dvico_xc5000_tunerconfig = {
.i2c_address = 0x64,
.if_khz = 5380,
- .tuner_callback = cx23885_tuner_callback
+ .tuner_callback = cx23885_tuner_callback,
};
static struct tda829x_config tda829x_no_probe = {
@@ -304,35 +305,11 @@ static struct dib7000p_config hauppauge_hvr1400_dib7000_config = {
.output_mode = OUTMODE_MPEG2_SERIAL,
};
-static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg)
-{
- struct cx23885_tsport *port = ptr;
- struct cx23885_dev *dev = port->dev;
-
- switch (command) {
- case XC2028_TUNER_RESET:
- /* Send the tuner in then out of reset */
- /* GPIO-2 xc3028 tuner */
- dprintk(1, "%s: XC2028_TUNER_RESET %d\n", __func__, arg);
-
- cx_set(GP0_IO, 0x00040000);
- cx_clear(GP0_IO, 0x00000004);
- msleep(5);
-
- cx_set(GP0_IO, 0x00040004);
- msleep(5);
- break;
- case XC2028_RESET_CLK:
- dprintk(1, "%s: XC2028_RESET_CLK %d\n", __func__, arg);
- break;
- default:
- dprintk(1, "%s: unknown command %d, arg %d\n", __func__,
- command, arg);
- return -EINVAL;
- }
-
- return 0;
-}
+static struct zl10353_config dvico_fusionhdtv_xc3028 = {
+ .demod_address = 0x0f,
+ .if2 = 45600,
+ .no_tuner = 1,
+};
static int dvb_register(struct cx23885_tsport *port)
{
@@ -415,7 +392,7 @@ static int dvb_register(struct cx23885_tsport *port)
if (port->dvb.frontend != NULL)
dvb_attach(xc5000_attach, port->dvb.frontend,
&i2c_bus->i2c_adap,
- &hauppauge_hvr1500q_tunerconfig, i2c_bus);
+ &hauppauge_hvr1500q_tunerconfig, port);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1500:
i2c_bus = &dev->i2c_bus[1];
@@ -427,7 +404,8 @@ static int dvb_register(struct cx23885_tsport *port)
struct xc2028_config cfg = {
.i2c_adap = &i2c_bus->i2c_adap,
.i2c_addr = 0x61,
- .callback = cx23885_hvr1500_xc3028_callback,
+ .video_dev = port,
+ .callback = cx23885_tuner_callback,
};
static struct xc2028_ctrl ctl = {
.fname = "xc3028-v27.fw",
@@ -466,7 +444,8 @@ static int dvb_register(struct cx23885_tsport *port)
struct xc2028_config cfg = {
.i2c_adap = &dev->i2c_bus[1].i2c_adap,
.i2c_addr = 0x64,
- .callback = cx23885_hvr1500_xc3028_callback,
+ .video_dev = port,
+ .callback = cx23885_tuner_callback,
};
static struct xc2028_ctrl ctl = {
.fname = "xc3028L-v36.fw",
@@ -494,8 +473,35 @@ static int dvb_register(struct cx23885_tsport *port)
if (port->dvb.frontend != NULL)
dvb_attach(xc5000_attach, port->dvb.frontend,
&i2c_bus->i2c_adap,
- &dvico_xc5000_tunerconfig, i2c_bus);
+ &dvico_xc5000_tunerconfig, port);
break;
+ case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: {
+ i2c_bus = &dev->i2c_bus[port->nr - 1];
+
+ port->dvb.frontend = dvb_attach(zl10353_attach,
+ &dvico_fusionhdtv_xc3028,
+ &i2c_bus->i2c_adap);
+ if (port->dvb.frontend != NULL) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &i2c_bus->i2c_adap,
+ .i2c_addr = 0x61,
+ .video_dev = port,
+ .callback = cx23885_tuner_callback,
+ };
+ static struct xc2028_ctrl ctl = {
+ .fname = "xc3028-v27.fw",
+ .max_len = 64,
+ .demod = XC3028_FE_ZARLINK456,
+ };
+
+ fe = dvb_attach(xc2028_attach, port->dvb.frontend,
+ &cfg);
+ if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+ fe->ops.tuner_ops.set_config(fe, &ctl);
+ }
+ break;
+ }
default:
printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->name);
diff --git a/linux/drivers/media/video/cx23885/cx23885.h b/linux/drivers/media/video/cx23885/cx23885.h
index 9a0b4bf3a..9b76a8acf 100644
--- a/linux/drivers/media/video/cx23885/cx23885.h
+++ b/linux/drivers/media/video/cx23885/cx23885.h
@@ -65,6 +65,7 @@
#define CX23885_BOARD_HAUPPAUGE_HVR1700 8
#define CX23885_BOARD_HAUPPAUGE_HVR1400 9
#define CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP 10
+#define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP 11
/* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */
#define CX23885_NORMS (\
diff --git a/linux/drivers/media/video/ivtv/ivtv-version.h b/linux/drivers/media/video/ivtv/ivtv-version.h
index 442f43f11..8cd753d30 100644
--- a/linux/drivers/media/video/ivtv/ivtv-version.h
+++ b/linux/drivers/media/video/ivtv/ivtv-version.h
@@ -22,7 +22,7 @@
#define IVTV_DRIVER_NAME "ivtv"
#define IVTV_DRIVER_VERSION_MAJOR 1
-#define IVTV_DRIVER_VERSION_MINOR 3
+#define IVTV_DRIVER_VERSION_MINOR 4
#define IVTV_DRIVER_VERSION_PATCHLEVEL 0
#define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL)
diff --git a/linux/drivers/media/video/mxb.c b/linux/drivers/media/video/mxb.c
index bf2462a58..974505a9e 100644
--- a/linux/drivers/media/video/mxb.c
+++ b/linux/drivers/media/video/mxb.c
@@ -467,15 +467,15 @@ static int mxb_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data
/* checking for i2c-devices can be omitted here, because we
already did this in "mxb_vl42_probe" */
- saa7146_vv_init(dev,&vv_data);
- if( 0 != saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_GRABBER)) {
+ saa7146_vv_init(dev, &vv_data);
+ if (saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_GRABBER)) {
ERR(("cannot register capture v4l2 device. skipping.\n"));
return -1;
}
/* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/
- if( 0 != MXB_BOARD_CAN_DO_VBI(dev)) {
- if( 0 != saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) {
+ if (MXB_BOARD_CAN_DO_VBI(dev)) {
+ if (saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) {
ERR(("cannot register vbi v4l2 device. skipping.\n"));
}
}
@@ -487,7 +487,7 @@ static int mxb_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data
i2c_use_client(mxb->saa7111a);
i2c_use_client(mxb->tuner);
- printk("mxb: found 'Multimedia eXtension Board'-%d.\n",mxb_num);
+ printk("mxb: found Multimedia eXtension Board #%d.\n", mxb_num);
mxb_num++;
mxb_init_done(dev);
@@ -738,8 +738,8 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
DEB_EE(("VIDIOC_G_TUNER: %d\n", t->index));
memset(t,0,sizeof(*t));
- strcpy(t->name, "Television");
+ strlcpy(t->name, "Television", sizeof(t->name));
t->type = V4L2_TUNER_ANALOG_TV;
t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
t->rangelow = 772; /* 48.25 MHZ / 62.5 kHz = 772, see fi1216mk2-specs, page 2 */
@@ -747,7 +747,6 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
/* FIXME: add the real signal strength here */
t->signal = 0xffff;
t->afc = 0;
-
mxb->tda9840->driver->command(mxb->tda9840,TDA9840_DETECT, &byte);
t->audmode = mxb->cur_mode;
diff --git a/linux/drivers/media/video/saa7134/saa6752hs.c b/linux/drivers/media/video/saa7134/saa6752hs.c
index c5c19a2e3..011fc19f6 100644
--- a/linux/drivers/media/video/saa7134/saa6752hs.c
+++ b/linux/drivers/media/video/saa7134/saa6752hs.c
@@ -1,3 +1,27 @@
+ /*
+ saa6752hs - i2c-driver for the saa6752hs by Philips
+
+ Copyright (C) 2004 Andrew de Quincey
+
+ AC-3 support:
+
+ Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License vs published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mvss Ave, Cambridge, MA 02139, USA.
+ */
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
@@ -11,6 +35,8 @@
#include "compat.h"
#include <linux/videodev2.h>
#include <media/v4l2-common.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-i2c-drv-legacy.h>
#include <linux/init.h>
#include <linux/crc32.h>
@@ -28,9 +54,6 @@ MODULE_DESCRIPTION("device driver for saa6752hs MPEG2 encoder");
MODULE_AUTHOR("Andrew de Quincey");
MODULE_LICENSE("GPL");
-static struct i2c_driver driver;
-static struct i2c_client client_template;
-
enum saa6752hs_videoformat {
SAA6752HS_VF_D1 = 0, /* standard D1 video format: 720x576 */
SAA6752HS_VF_2_3_D1 = 1,/* 2/3D1 video format: 480x576 */
@@ -47,7 +70,9 @@ struct saa6752hs_mpeg_params {
__u16 ts_pid_pcr;
/* audio */
- enum v4l2_mpeg_audio_l2_bitrate au_l2_bitrate;
+ enum v4l2_mpeg_audio_encoding au_encoding;
+ enum v4l2_mpeg_audio_l2_bitrate au_l2_bitrate;
+ enum v4l2_mpeg_audio_ac3_bitrate au_ac3_bitrate;
/* video */
enum v4l2_mpeg_video_aspect vi_aspect;
@@ -71,7 +96,9 @@ static const struct v4l2_format v4l2_format_table[] =
};
struct saa6752hs_state {
- struct i2c_client client;
+ int chip;
+ u32 revision;
+ int has_ac3;
struct saa6752hs_mpeg_params params;
enum saa6752hs_videoformat video_format;
v4l2_std_id standard;
@@ -146,6 +173,39 @@ static u8 PMT[] = {
0x00, 0x00, 0x00, 0x00 /* CRC32 */
};
+static u8 PMT_AC3[] = {
+ 0xc2, /* i2c register */
+ 0x01, /* table number for encoder(1) */
+ 0x47, /* sync */
+
+ 0x40, /* transport_error_indicator(0), payload_unit_start(1), transport_priority(0) */
+ 0x10, /* PMT PID (0x0010) */
+ 0x10, /* transport_scrambling_control(00), adaptation_field_control(01), continuity_counter(0) */
+
+ 0x00, /* PSI pointer to start of table */
+
+ 0x02, /* TID (2) */
+ 0xb0, 0x1a, /* section_syntax_indicator(1), section_length(26) */
+
+ 0x00, 0x01, /* program_number(1) */
+
+ 0xc1, /* version_number(0), current_next_indicator(1) */
+
+ 0x00, 0x00, /* section_number(0), last_section_number(0) */
+
+ 0xe1, 0x04, /* PCR_PID (0x0104) */
+
+ 0xf0, 0x00, /* program_info_length(0) */
+
+ 0x02, 0xe1, 0x00, 0xf0, 0x00, /* video stream type(2), pid */
+ 0x06, 0xe1, 0x03, 0xf0, 0x03, /* audio stream type(6), pid */
+ 0x6a, /* AC3 */
+ 0x01, /* Descriptor_length(1) */
+ 0x00, /* component_type_flag(0), bsid_flag(0), mainid_flag(0), asvc_flag(0), reserved flags(0) */
+
+ 0xED, 0xDE, 0x2D, 0xF3 /* CRC32 BE */
+};
+
static struct saa6752hs_mpeg_params param_defaults =
{
.ts_pid_pmt = 16,
@@ -158,7 +218,9 @@ static struct saa6752hs_mpeg_params param_defaults =
.vi_bitrate_peak = 6000,
.vi_bitrate_mode = V4L2_MPEG_VIDEO_BITRATE_MODE_VBR,
+ .au_encoding = V4L2_MPEG_AUDIO_ENCODING_LAYER_2,
.au_l2_bitrate = V4L2_MPEG_AUDIO_L2_BITRATE_256K,
+ .au_ac3_bitrate = V4L2_MPEG_AUDIO_AC3_BITRATE_256K,
};
/* ---------------------------------------------------------------------- */
@@ -231,8 +293,9 @@ static int saa6752hs_chip_command(struct i2c_client* client,
static int saa6752hs_set_bitrate(struct i2c_client* client,
- struct saa6752hs_mpeg_params* params)
+ struct saa6752hs_state *h)
{
+ struct saa6752hs_mpeg_params *params = &h->params;
u8 buf[3];
int tot_bitrate;
@@ -264,11 +327,19 @@ static int saa6752hs_set_bitrate(struct i2c_client* client,
tot_bitrate = params->vi_bitrate;
}
+ /* set the audio encoding */
+ buf[0] = 0x93;
+ buf[1] = (params->au_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3);
+ i2c_master_send(client, buf, 2);
+
/* set the audio bitrate */
buf[0] = 0x94;
- buf[1] = (V4L2_MPEG_AUDIO_L2_BITRATE_256K == params->au_l2_bitrate) ? 0 : 1;
+ if (params->au_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3)
+ buf[1] = V4L2_MPEG_AUDIO_AC3_BITRATE_384K == params->au_ac3_bitrate;
+ else
+ buf[1] = V4L2_MPEG_AUDIO_L2_BITRATE_384K == params->au_l2_bitrate;
+ tot_bitrate += buf[1] ? 384 : 256;
i2c_master_send(client, buf, 2);
- tot_bitrate += (V4L2_MPEG_AUDIO_L2_BITRATE_256K == params->au_l2_bitrate) ? 256 : 384;
/* Note: the total max bitrate is determined by adding the video and audio
bitrates together and also adding an extra 768kbit/s to stay on the
@@ -333,7 +404,7 @@ static void saa6752hs_set_subsampling(struct i2c_client* client,
}
-static int handle_ctrl(struct saa6752hs_mpeg_params *params,
+static int handle_ctrl(int has_ac3, struct saa6752hs_mpeg_params *params,
struct v4l2_ext_control *ctrl, unsigned int cmd)
{
int old = 0, new;
@@ -380,8 +451,9 @@ static int handle_ctrl(struct saa6752hs_mpeg_params *params,
params->ts_pid_pcr = new;
break;
case V4L2_CID_MPEG_AUDIO_ENCODING:
- old = V4L2_MPEG_AUDIO_ENCODING_LAYER_2;
- if (set && new != old)
+ old = params->au_encoding;
+ if (set && new != V4L2_MPEG_AUDIO_ENCODING_LAYER_2 &&
+ (!has_ac3 || new != V4L2_MPEG_AUDIO_ENCODING_AC3))
return -ERANGE;
new = old;
break;
@@ -396,6 +468,19 @@ static int handle_ctrl(struct saa6752hs_mpeg_params *params,
new = V4L2_MPEG_AUDIO_L2_BITRATE_384K;
params->au_l2_bitrate = new;
break;
+ case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
+ if (!has_ac3)
+ return -EINVAL;
+ old = params->au_ac3_bitrate;
+ if (set && new != V4L2_MPEG_AUDIO_AC3_BITRATE_256K &&
+ new != V4L2_MPEG_AUDIO_AC3_BITRATE_384K)
+ return -ERANGE;
+ if (new <= V4L2_MPEG_AUDIO_AC3_BITRATE_256K)
+ new = V4L2_MPEG_AUDIO_AC3_BITRATE_256K;
+ else
+ new = V4L2_MPEG_AUDIO_AC3_BITRATE_384K;
+ params->au_ac3_bitrate = new;
+ break;
case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
old = V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000;
if (set && new != old)
@@ -449,17 +534,19 @@ static int handle_ctrl(struct saa6752hs_mpeg_params *params,
return 0;
}
-static int saa6752hs_qctrl(struct saa6752hs_mpeg_params *params,
+static int saa6752hs_qctrl(struct saa6752hs_state *h,
struct v4l2_queryctrl *qctrl)
{
+ struct saa6752hs_mpeg_params *params = &h->params;
int err;
switch (qctrl->id) {
case V4L2_CID_MPEG_AUDIO_ENCODING:
return v4l2_ctrl_query_fill(qctrl,
V4L2_MPEG_AUDIO_ENCODING_LAYER_2,
- V4L2_MPEG_AUDIO_ENCODING_LAYER_2, 1,
- V4L2_MPEG_AUDIO_ENCODING_LAYER_2);
+ h->has_ac3 ? V4L2_MPEG_AUDIO_ENCODING_AC3 :
+ V4L2_MPEG_AUDIO_ENCODING_LAYER_2,
+ 1, V4L2_MPEG_AUDIO_ENCODING_LAYER_2);
case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
return v4l2_ctrl_query_fill(qctrl,
@@ -467,6 +554,14 @@ static int saa6752hs_qctrl(struct saa6752hs_mpeg_params *params,
V4L2_MPEG_AUDIO_L2_BITRATE_384K, 1,
V4L2_MPEG_AUDIO_L2_BITRATE_256K);
+ case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
+ if (!h->has_ac3)
+ return -EINVAL;
+ return v4l2_ctrl_query_fill(qctrl,
+ V4L2_MPEG_AUDIO_AC3_BITRATE_256K,
+ V4L2_MPEG_AUDIO_AC3_BITRATE_384K, 1,
+ V4L2_MPEG_AUDIO_AC3_BITRATE_256K);
+
case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
return v4l2_ctrl_query_fill(qctrl,
V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000,
@@ -513,44 +608,57 @@ static int saa6752hs_qctrl(struct saa6752hs_mpeg_params *params,
return -EINVAL;
}
-static int saa6752hs_qmenu(struct saa6752hs_mpeg_params *params,
+static int saa6752hs_qmenu(struct saa6752hs_state *h,
struct v4l2_querymenu *qmenu)
{
- static const char *mpeg_audio_l2_bitrate[] = {
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "256 kbps",
- "",
- "384 kbps",
- NULL
+ static const u32 mpeg_audio_encoding[] = {
+ V4L2_MPEG_AUDIO_ENCODING_LAYER_2,
+ V4L2_CTRL_MENU_IDS_END
+ };
+ static const u32 mpeg_audio_ac3_encoding[] = {
+ V4L2_MPEG_AUDIO_ENCODING_LAYER_2,
+ V4L2_MPEG_AUDIO_ENCODING_AC3,
+ V4L2_CTRL_MENU_IDS_END
+ };
+ static u32 mpeg_audio_l2_bitrate[] = {
+ V4L2_MPEG_AUDIO_L2_BITRATE_256K,
+ V4L2_MPEG_AUDIO_L2_BITRATE_384K,
+ V4L2_CTRL_MENU_IDS_END
+ };
+ static u32 mpeg_audio_ac3_bitrate[] = {
+ V4L2_MPEG_AUDIO_AC3_BITRATE_256K,
+ V4L2_MPEG_AUDIO_AC3_BITRATE_384K,
+ V4L2_CTRL_MENU_IDS_END
};
struct v4l2_queryctrl qctrl;
int err;
qctrl.id = qmenu->id;
- err = saa6752hs_qctrl(params, &qctrl);
+ err = saa6752hs_qctrl(h, &qctrl);
if (err)
return err;
- if (qmenu->id == V4L2_CID_MPEG_AUDIO_L2_BITRATE)
- return v4l2_ctrl_query_menu(qmenu, &qctrl,
+ switch (qmenu->id) {
+ case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
+ return v4l2_ctrl_query_menu_valid_items(qmenu,
mpeg_audio_l2_bitrate);
- return v4l2_ctrl_query_menu(qmenu, &qctrl,
- v4l2_ctrl_get_menu(qmenu->id));
+ case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
+ if (!h->has_ac3)
+ return -EINVAL;
+ return v4l2_ctrl_query_menu_valid_items(qmenu,
+ mpeg_audio_ac3_bitrate);
+ case V4L2_CID_MPEG_AUDIO_ENCODING:
+ return v4l2_ctrl_query_menu_valid_items(qmenu,
+ h->has_ac3 ? mpeg_audio_ac3_encoding :
+ mpeg_audio_encoding);
+ }
+ return v4l2_ctrl_query_menu(qmenu, &qctrl, NULL);
}
static int saa6752hs_init(struct i2c_client* client)
{
unsigned char buf[9], buf2[4];
struct saa6752hs_state *h;
+ unsigned size;
u32 crc;
unsigned char localPAT[256];
unsigned char localPMT[256];
@@ -570,7 +678,7 @@ static int saa6752hs_init(struct i2c_client* client)
i2c_master_send(client, buf, 2);
/* set bitrate */
- saa6752hs_set_bitrate(client, &h->params);
+ saa6752hs_set_bitrate(client, h);
/* Set GOP structure {3, 13} */
buf[0] = 0x72;
@@ -609,7 +717,13 @@ static int saa6752hs_init(struct i2c_client* client)
localPAT[sizeof(PAT) - 1] = crc & 0xFF;
/* compute PMT */
- memcpy(localPMT, PMT, sizeof(PMT));
+ if (h->params.au_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3) {
+ size = sizeof(PMT_AC3);
+ memcpy(localPMT, PMT_AC3, size);
+ } else {
+ size = sizeof(PMT);
+ memcpy(localPMT, PMT, size);
+ }
localPMT[3] = 0x40 | ((h->params.ts_pid_pmt >> 8) & 0x0f);
localPMT[4] = h->params.ts_pid_pmt & 0xff;
localPMT[15] = 0xE0 | ((h->params.ts_pid_pcr >> 8) & 0x0F);
@@ -618,11 +732,11 @@ static int saa6752hs_init(struct i2c_client* client)
localPMT[21] = h->params.ts_pid_video & 0xFF;
localPMT[25] = 0xE0 | ((h->params.ts_pid_audio >> 8) & 0x0F);
localPMT[26] = h->params.ts_pid_audio & 0xFF;
- crc = crc32_be(~0, &localPMT[7], sizeof(PMT) - 7 - 4);
- localPMT[sizeof(PMT) - 4] = (crc >> 24) & 0xFF;
- localPMT[sizeof(PMT) - 3] = (crc >> 16) & 0xFF;
- localPMT[sizeof(PMT) - 2] = (crc >> 8) & 0xFF;
- localPMT[sizeof(PMT) - 1] = crc & 0xFF;
+ crc = crc32_be(~0, &localPMT[7], size - 7 - 4);
+ localPMT[size - 4] = (crc >> 24) & 0xFF;
+ localPMT[size - 3] = (crc >> 16) & 0xFF;
+ localPMT[size - 2] = (crc >> 8) & 0xFF;
+ localPMT[size - 1] = crc & 0xFF;
/* Set Audio PID */
buf[0] = 0xC1;
@@ -643,8 +757,8 @@ static int saa6752hs_init(struct i2c_client* client)
i2c_master_send(client,buf,3);
/* Send SI tables */
- i2c_master_send(client,localPAT,sizeof(PAT));
- i2c_master_send(client,localPMT,sizeof(PMT));
+ i2c_master_send(client, localPAT, sizeof(PAT));
+ i2c_master_send(client, localPMT, size);
/* mute then unmute audio. This removes buzzing artefacts */
buf[0] = 0xa4;
@@ -689,45 +803,6 @@ static int saa6752hs_init(struct i2c_client* client)
return 0;
}
-static int saa6752hs_attach(struct i2c_adapter *adap, int addr, int kind)
-{
- struct saa6752hs_state *h;
-
-
- if (NULL == (h = kzalloc(sizeof(*h), GFP_KERNEL)))
- return -ENOMEM;
- h->client = client_template;
- h->params = param_defaults;
- h->client.adapter = adap;
- h->client.addr = addr;
-
- /* Assume 625 input lines */
- h->standard = 0;
-
- i2c_set_clientdata(&h->client, h);
- i2c_attach_client(&h->client);
-
- v4l_info(&h->client,"saa6752hs: chip found @ 0x%x\n", addr<<1);
- return 0;
-}
-
-static int saa6752hs_probe(struct i2c_adapter *adap)
-{
- if (adap->class & I2C_CLASS_TV_ANALOG)
- return i2c_probe(adap, &addr_data, saa6752hs_attach);
- return 0;
-}
-
-static int saa6752hs_detach(struct i2c_client *client)
-{
- struct saa6752hs_state *h;
-
- h = i2c_get_clientdata(client);
- i2c_detach_client(client);
- kfree(h);
- return 0;
-}
-
static int
saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg)
{
@@ -753,7 +828,8 @@ saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg)
return -EINVAL;
params = h->params;
for (i = 0; i < ctrls->count; i++) {
- if ((err = handle_ctrl(&params, ctrls->controls + i, cmd))) {
+ err = handle_ctrl(h->has_ac3, &params, ctrls->controls + i, cmd);
+ if (err) {
ctrls->error_idx = i;
return err;
}
@@ -761,9 +837,9 @@ saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg)
h->params = params;
break;
case VIDIOC_QUERYCTRL:
- return saa6752hs_qctrl(&h->params, arg);
+ return saa6752hs_qctrl(h, arg);
case VIDIOC_QUERYMENU:
- return saa6752hs_qmenu(&h->params, arg);
+ return saa6752hs_qmenu(h, arg);
case VIDIOC_G_FMT:
{
struct v4l2_format *f = arg;
@@ -786,6 +862,11 @@ saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg)
case VIDIOC_S_STD:
h->standard = *((v4l2_std_id *) arg);
break;
+
+ case VIDIOC_G_CHIP_IDENT:
+ return v4l2_chip_ident_i2c_client(client,
+ arg, h->chip, h->revision);
+
default:
/* nothing */
break;
@@ -794,36 +875,59 @@ saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg)
return err;
}
-/* ----------------------------------------------------------------------- */
+static int saa6752hs_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct saa6752hs_state *h = kzalloc(sizeof(*h), GFP_KERNEL);
+ u8 addr = 0x13;
+ u8 data[12];
-static struct i2c_driver driver = {
- .driver = {
- .name = "saa6752hs",
- },
- .id = I2C_DRIVERID_SAA6752HS,
- .attach_adapter = saa6752hs_probe,
- .detach_client = saa6752hs_detach,
- .command = saa6752hs_command,
-};
+ v4l_info(client, "chip found @ 0x%x (%s)\n",
+ client->addr << 1, client->adapter->name);
+ if (h == NULL)
+ return -ENOMEM;
-static struct i2c_client client_template =
-{
- .name = "saa6752hs",
- .driver = &driver,
-};
+ i2c_master_send(client, &addr, 1);
+ i2c_master_recv(client, data, sizeof(data));
+ h->chip = V4L2_IDENT_SAA6752HS;
+ h->revision = (data[8] << 8) | data[9];
+ h->has_ac3 = 0;
+ if (h->revision == 0x0206) {
+ h->chip = V4L2_IDENT_SAA6752HS_AC3;
+ h->has_ac3 = 1;
+ v4l_info(client, "support AC-3\n");
+ }
+ h->params = param_defaults;
+ h->standard = 0; /* Assume 625 input lines */
-static int __init saa6752hs_init_module(void)
-{
- return i2c_add_driver(&driver);
+ i2c_set_clientdata(client, h);
+ return 0;
}
-static void __exit saa6752hs_cleanup_module(void)
+static int saa6752hs_remove(struct i2c_client *client)
{
- i2c_del_driver(&driver);
+ kfree(i2c_get_clientdata(client));
+ return 0;
}
-module_init(saa6752hs_init_module);
-module_exit(saa6752hs_cleanup_module);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26)
+static const struct i2c_device_id saa6752hs_id[] = {
+ { "saa6752hs", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, saa6752hs_id);
+
+#endif
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
+ .name = "saa6752hs",
+ .driverid = I2C_DRIVERID_SAA6752HS,
+ .command = saa6752hs_command,
+ .probe = saa6752hs_probe,
+ .remove = saa6752hs_remove,
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26)
+ .id_table = saa6752hs_id,
+#endif
+};
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
diff --git a/linux/drivers/media/video/saa7134/saa7134-empress.c b/linux/drivers/media/video/saa7134/saa7134-empress.c
index a454968f7..5225ed6b8 100644
--- a/linux/drivers/media/video/saa7134/saa7134-empress.c
+++ b/linux/drivers/media/video/saa7134/saa7134-empress.c
@@ -29,6 +29,7 @@
#include <media/saa6752hs.h>
#include <media/v4l2-common.h>
+#include <media/v4l2-chip-ident.h>
/* ------------------------------------------------------------------ */
@@ -403,6 +404,25 @@ static int empress_querymenu(struct file *file, void *priv,
return saa7134_i2c_call_saa6752(dev, VIDIOC_QUERYMENU, c);
}
+static int empress_g_chip_ident(struct file *file, void *fh,
+ struct v4l2_chip_ident *chip)
+{
+ struct saa7134_dev *dev = file->private_data;
+
+ chip->ident = V4L2_IDENT_NONE;
+ chip->revision = 0;
+ if (dev->mpeg_i2c_client == NULL)
+ return -EINVAL;
+ if (chip->match_type == V4L2_CHIP_MATCH_I2C_DRIVER &&
+ chip->match_chip == I2C_DRIVERID_SAA6752HS)
+ return saa7134_i2c_call_saa6752(dev, VIDIOC_G_CHIP_IDENT, chip);
+ if (chip->match_type == V4L2_CHIP_MATCH_I2C_ADDR &&
+ chip->match_chip == dev->mpeg_i2c_client->addr)
+ return saa7134_i2c_call_saa6752(dev, VIDIOC_G_CHIP_IDENT, chip);
+ return -EINVAL;
+}
+
+
static const struct file_operations ts_fops =
{
.owner = THIS_MODULE,
@@ -431,11 +451,11 @@ static const struct v4l2_ioctl_ops ts_ioctl_ops = {
.vidioc_enum_input = empress_enum_input,
.vidioc_g_input = empress_g_input,
.vidioc_s_input = empress_s_input,
-
.vidioc_queryctrl = empress_queryctrl,
.vidioc_querymenu = empress_querymenu,
.vidioc_g_ctrl = empress_g_ctrl,
.vidioc_s_ctrl = empress_s_ctrl,
+ .vidioc_g_chip_ident = empress_g_chip_ident,
};
/* ----------------------------------------------------------- */
diff --git a/linux/drivers/media/video/tda9840.c b/linux/drivers/media/video/tda9840.c
index f4ebfd84b..2d3d430c5 100644
--- a/linux/drivers/media/video/tda9840.c
+++ b/linux/drivers/media/video/tda9840.c
@@ -2,6 +2,7 @@
tda9840 - i2c-driver for the tda9840 by SGS Thomson
Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
+ Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl>
The tda9840 is a stereo/dual sound processor with digital
identification. It can be found at address 0x84 on the i2c-bus.
@@ -28,16 +29,19 @@
#include <linux/module.h>
#include <linux/ioctl.h>
#include <linux/i2c.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-i2c-drv-legacy.h>
+#include "tda9840.h"
#include "compat.h"
-#include "tda9840.h"
+MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
+MODULE_DESCRIPTION("tda9840 driver");
+MODULE_LICENSE("GPL");
-static int debug; /* insmod parameter */
+static int debug;
module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
-#define dprintk(args...) \
- do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __func__, __LINE__); printk(args); } } while (0)
+MODULE_PARM_DESC(debug, "Debug level (0-1)");
#define SWITCH 0x00
#define LEVEL_ADJUST 0x02
@@ -50,18 +54,21 @@ static unsigned short normal_i2c[] = { I2C_ADDR_TDA9840, I2C_CLIENT_END };
/* magic definition of all other variables and things */
I2C_CLIENT_INSMOD;
-static struct i2c_driver driver;
-static struct i2c_client client_template;
+static void tda9840_write(struct i2c_client *client, u8 reg, u8 val)
+{
+ if (i2c_smbus_write_byte_data(client, reg, val))
+ v4l_dbg(1, debug, client, "error writing %02x to %02x\n",
+ val, reg);
+}
-static int command(struct i2c_client *client, unsigned int cmd, void *arg)
+static int tda9840_command(struct i2c_client *client, unsigned cmd, void *arg)
{
int result;
int byte = *(int *)arg;
switch (cmd) {
case TDA9840_SWITCH:
-
- dprintk("TDA9840_SWITCH: 0x%02x\n", byte);
+ v4l_dbg(1, debug, client, "TDA9840_SWITCH: 0x%02x\n", byte);
if (byte != TDA9840_SET_MONO
&& byte != TDA9840_SET_MUTE
@@ -74,14 +81,11 @@ static int command(struct i2c_client *client, unsigned int cmd, void *arg)
return -EINVAL;
}
- result = i2c_smbus_write_byte_data(client, SWITCH, byte);
- if (result)
- dprintk("i2c_smbus_write_byte() failed, ret:%d\n", result);
+ tda9840_write(client, SWITCH, byte);
break;
case TDA9840_LEVEL_ADJUST:
-
- dprintk("TDA9840_LEVEL_ADJUST: %d\n", byte);
+ v4l_dbg(1, debug, client, "TDA9840_LEVEL_ADJUST: %d\n", byte);
/* check for correct range */
if (byte > 25 || byte < -20)
@@ -93,15 +97,11 @@ static int command(struct i2c_client *client, unsigned int cmd, void *arg)
byte += 0x8;
else
byte = -byte;
-
- result = i2c_smbus_write_byte_data(client, LEVEL_ADJUST, byte);
- if (result)
- dprintk("i2c_smbus_write_byte() failed, ret:%d\n", result);
+ tda9840_write(client, LEVEL_ADJUST, byte);
break;
case TDA9840_STEREO_ADJUST:
-
- dprintk("TDA9840_STEREO_ADJUST: %d\n", byte);
+ v4l_dbg(1, debug, client, "TDA9840_STEREO_ADJUST: %d\n", byte);
/* check for correct range */
if (byte > 25 || byte < -24)
@@ -114,9 +114,7 @@ static int command(struct i2c_client *client, unsigned int cmd, void *arg)
else
byte = -byte;
- result = i2c_smbus_write_byte_data(client, STEREO_ADJUST, byte);
- if (result)
- dprintk("i2c_smbus_write_byte() failed, ret:%d\n", result);
+ tda9840_write(client, STEREO_ADJUST, byte);
break;
case TDA9840_DETECT: {
@@ -124,29 +122,29 @@ static int command(struct i2c_client *client, unsigned int cmd, void *arg)
byte = i2c_smbus_read_byte_data(client, STEREO_ADJUST);
if (byte == -1) {
- dprintk("i2c_smbus_read_byte_data() failed\n");
+ v4l_dbg(1, debug, client,
+ "i2c_smbus_read_byte_data() failed\n");
return -EIO;
}
- if (0 != (byte & 0x80)) {
- dprintk("TDA9840_DETECT: register contents invalid\n");
+ if (byte & 0x80) {
+ v4l_dbg(1, debug, client,
+ "TDA9840_DETECT: register contents invalid\n");
return -EINVAL;
}
- dprintk("TDA9840_DETECT: byte: 0x%02x\n", byte);
- *ret = ((byte & 0x60) >> 5);
+ v4l_dbg(1, debug, client, "TDA9840_DETECT: byte: 0x%02x\n", byte);
+ *ret = (byte & 0x60) >> 5;
result = 0;
break;
}
case TDA9840_TEST:
- dprintk("TDA9840_TEST: 0x%02x\n", byte);
+ v4l_dbg(1, debug, client, "TDA9840_TEST: 0x%02x\n", byte);
/* mask out irrelevant bits */
byte &= 0x3;
- result = i2c_smbus_write_byte_data(client, TEST, byte);
- if (result)
- dprintk("i2c_smbus_write_byte() failed, ret:%d\n", result);
+ tda9840_write(client, TEST, byte);
break;
default:
return -ENOIOCTLCMD;
@@ -158,99 +156,55 @@ static int command(struct i2c_client *client, unsigned int cmd, void *arg)
return 0;
}
-static int detect(struct i2c_adapter *adapter, int address, int kind)
+static int tda9840_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
- int result = 0;
-
- int byte = 0x0;
+ int result;
+ int byte;
/* let's see whether this adapter can support what we need */
- if (0 == i2c_check_functionality(adapter,
- I2C_FUNC_SMBUS_READ_BYTE_DATA |
- I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) {
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE_DATA |
+ I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
return 0;
- }
- /* allocate memory for client structure */
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (!client) {
- printk("not enough kernel memory\n");
- return -ENOMEM;
- }
-
- /* fill client structure */
- memcpy(client, &client_template, sizeof(struct i2c_client));
- client->addr = address;
- client->adapter = adapter;
-
- /* tell the i2c layer a new client has arrived */
- if (0 != (result = i2c_attach_client(client))) {
- kfree(client);
- return result;
- }
+ v4l_info(client, "chip found @ 0x%x (%s)\n",
+ client->addr << 1, client->adapter->name);
/* set initial values for level & stereo - adjustment, mode */
byte = 0;
- result = command(client, TDA9840_LEVEL_ADJUST, &byte);
- result += command(client, TDA9840_STEREO_ADJUST, &byte);
+ result = tda9840_command(client, TDA9840_LEVEL_ADJUST, &byte);
+ result += tda9840_command(client, TDA9840_STEREO_ADJUST, &byte);
byte = TDA9840_SET_MONO;
- result = command(client, TDA9840_SWITCH, &byte);
+ result = tda9840_command(client, TDA9840_SWITCH, &byte);
if (result) {
- dprintk("could not initialize tda9840\n");
+ v4l_dbg(1, debug, client, "could not initialize tda9840\n");
return -ENODEV;
}
-
- printk("tda9840: detected @ 0x%02x on adapter %s\n", address, &client->adapter->name[0]);
return 0;
}
-static int attach(struct i2c_adapter *adapter)
+static int tda9840_legacy_probe(struct i2c_adapter *adapter)
{
- /* let's see whether this is a know adapter we can attach to */
- if (adapter->id != I2C_HW_SAA7146) {
- dprintk("refusing to probe on unknown adapter [name='%s',id=0x%x]\n", adapter->name, adapter->id);
- return -ENODEV;
- }
-
- return i2c_probe(adapter, &addr_data, &detect);
+ /* Let's see whether this is a known adapter we can attach to.
+ Prevents conflicts with tvaudio.c. */
+ return adapter->id == I2C_HW_SAA7146;
}
-
-static int detach(struct i2c_client *client)
-{
- int ret = i2c_detach_client(client);
- kfree(client);
- return ret;
-}
-
-static struct i2c_driver driver = {
- .driver = {
- .name = "tda9840",
- },
- .id = I2C_DRIVERID_TDA9840,
- .attach_adapter = attach,
- .detach_client = detach,
- .command = command,
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26)
+static const struct i2c_device_id tda9840_id[] = {
+ { "tda9840", 0 },
+ { }
};
+MODULE_DEVICE_TABLE(i2c, tda9840_id);
+#endif
-static struct i2c_client client_template = {
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "tda9840",
- .driver = &driver,
+ .driverid = I2C_DRIVERID_TDA9840,
+ .command = tda9840_command,
+ .probe = tda9840_probe,
+ .legacy_probe = tda9840_legacy_probe,
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26)
+ .id_table = tda9840_id,
+#endif
};
-
-static int __init this_module_init(void)
-{
- return i2c_add_driver(&driver);
-}
-
-static void __exit this_module_exit(void)
-{
- i2c_del_driver(&driver);
-}
-
-module_init(this_module_init);
-module_exit(this_module_exit);
-
-MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
-MODULE_DESCRIPTION("tda9840 driver");
-MODULE_LICENSE("GPL");
diff --git a/linux/drivers/media/video/tea6415c.c b/linux/drivers/media/video/tea6415c.c
index da654bd15..073f020fa 100644
--- a/linux/drivers/media/video/tea6415c.c
+++ b/linux/drivers/media/video/tea6415c.c
@@ -2,6 +2,7 @@
tea6415c - i2c-driver for the tea6415c by SGS Thomson
Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
+ Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl>
The tea6415c is a bus controlled video-matrix-switch
with 8 inputs and 6 outputs.
@@ -30,19 +31,19 @@
#include <linux/module.h>
#include <linux/ioctl.h>
#include <linux/i2c.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-i2c-drv-legacy.h>
+#include "tea6415c.h"
#include "compat.h"
-#include "tea6415c.h"
+MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
+MODULE_DESCRIPTION("tea6415c driver");
+MODULE_LICENSE("GPL");
-static int debug; /* insmod parameter */
+static int debug;
module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
-
-#define dprintk(args...) \
- do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __func__, __LINE__); printk(args); } } while (0)
-#define TEA6415C_NUM_INPUTS 8
-#define TEA6415C_NUM_OUTPUTS 6
+MODULE_PARM_DESC(debug, "Debug level (0-1)");
/* addresses to scan, found only at 0x03 and/or 0x43 (7-bit) */
static unsigned short normal_i2c[] = { I2C_TEA6415C_1, I2C_TEA6415C_2, I2C_CLIENT_END };
@@ -50,60 +51,6 @@ static unsigned short normal_i2c[] = { I2C_TEA6415C_1, I2C_TEA6415C_2, I2C_CLIEN
/* magic definition of all other variables and things */
I2C_CLIENT_INSMOD;
-static struct i2c_driver driver;
-static struct i2c_client client_template;
-
-/* this function is called by i2c_probe */
-static int detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *client = NULL;
- int err = 0;
-
- /* let's see whether this adapter can support what we need */
- if (0 == i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE)) {
- return 0;
- }
-
- /* allocate memory for client structure */
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (!client) {
- return -ENOMEM;
- }
-
- /* fill client structure */
- memcpy(client, &client_template, sizeof(struct i2c_client));
- client->addr = address;
- client->adapter = adapter;
-
- /* tell the i2c layer a new client has arrived */
- if (0 != (err = i2c_attach_client(client))) {
- kfree(client);
- return err;
- }
-
- printk("tea6415c: detected @ 0x%02x on adapter %s\n", address, &client->adapter->name[0]);
-
- return 0;
-}
-
-static int attach(struct i2c_adapter *adapter)
-{
- /* let's see whether this is a know adapter we can attach to */
- if (adapter->id != I2C_HW_SAA7146) {
- dprintk("refusing to probe on unknown adapter [name='%s',id=0x%x]\n", adapter->name, adapter->id);
- return -ENODEV;
- }
-
- return i2c_probe(adapter, &addr_data, &detect);
-}
-
-static int detach(struct i2c_client *client)
-{
- int ret = i2c_detach_client(client);
- kfree(client);
- return ret;
-}
-
/* makes a connection between the input-pin 'i' and the output-pin 'o'
for the tea6415c-client 'client' */
static int switch_matrix(struct i2c_client *client, int i, int o)
@@ -111,7 +58,7 @@ static int switch_matrix(struct i2c_client *client, int i, int o)
u8 byte = 0;
int ret;
- dprintk("adr:0x%02x, i:%d, o:%d\n", client->addr, i, o);
+ v4l_dbg(1, debug, client, "i=%d, o=%d\n", i, o);
/* check if the pins are valid */
if (0 == ((1 == i || 3 == i || 5 == i || 6 == i || 8 == i || 10 == i || 20 == i || 11 == i)
@@ -169,14 +116,14 @@ static int switch_matrix(struct i2c_client *client, int i, int o)
ret = i2c_smbus_write_byte(client, byte);
if (ret) {
- dprintk("i2c_smbus_write_byte() failed, ret:%d\n", ret);
+ v4l_dbg(1, debug, client,
+ "i2c_smbus_write_byte() failed, ret:%d\n", ret);
return -EIO;
}
-
return ret;
}
-static int command(struct i2c_client *client, unsigned int cmd, void *arg)
+static int tea6415c_command(struct i2c_client *client, unsigned cmd, void *arg)
{
struct tea6415c_multiplex *v = (struct tea6415c_multiplex *)arg;
int result = 0;
@@ -188,38 +135,44 @@ static int command(struct i2c_client *client, unsigned int cmd, void *arg)
default:
return -ENOIOCTLCMD;
}
-
return result;
}
-static struct i2c_driver driver = {
- .driver = {
- .name = "tea6415c",
- },
- .id = I2C_DRIVERID_TEA6415C,
- .attach_adapter = attach,
- .detach_client = detach,
- .command = command,
-};
-
-static struct i2c_client client_template = {
- .name = "tea6415c",
- .driver = &driver,
-};
-
-static int __init this_module_init(void)
+/* this function is called by i2c_probe */
+static int tea6415c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- return i2c_add_driver(&driver);
+ /* let's see whether this adapter can support what we need */
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE))
+ return 0;
+
+ v4l_info(client, "chip found @ 0x%x (%s)\n",
+ client->addr << 1, client->adapter->name);
+ return 0;
}
-static void __exit this_module_exit(void)
+static int tea6415c_legacy_probe(struct i2c_adapter *adapter)
{
- i2c_del_driver(&driver);
+ /* Let's see whether this is a known adapter we can attach to.
+ Prevents conflicts with tvaudio.c. */
+ return adapter->id == I2C_HW_SAA7146;
}
-module_init(this_module_init);
-module_exit(this_module_exit);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26)
+static const struct i2c_device_id tea6415c_id[] = {
+ { "tea6415c", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tea6415c_id);
+#endif
-MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
-MODULE_DESCRIPTION("tea6415c driver");
-MODULE_LICENSE("GPL");
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
+ .name = "tea6415c",
+ .driverid = I2C_DRIVERID_TEA6415C,
+ .command = tea6415c_command,
+ .probe = tea6415c_probe,
+ .legacy_probe = tea6415c_legacy_probe,
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26)
+ .id_table = tea6415c_id,
+#endif
+};
diff --git a/linux/drivers/media/video/tea6420.c b/linux/drivers/media/video/tea6420.c
index d0c63703c..8ded72ade 100644
--- a/linux/drivers/media/video/tea6420.c
+++ b/linux/drivers/media/video/tea6420.c
@@ -2,6 +2,7 @@
tea6420 - i2c-driver for the tea6420 by SGS Thomson
Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
+ Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl>
The tea6420 is a bus controlled audio-matrix with 5 stereo inputs,
4 stereo outputs and gain control for each output.
@@ -30,16 +31,19 @@
#include <linux/module.h>
#include <linux/ioctl.h>
#include <linux/i2c.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-i2c-drv-legacy.h>
+#include "tea6420.h"
#include "compat.h"
-#include "tea6420.h"
+MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
+MODULE_DESCRIPTION("tea6420 driver");
+MODULE_LICENSE("GPL");
-static int debug; /* insmod parameter */
+static int debug;
module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
-#define dprintk(args...) \
- do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __func__, __LINE__); printk(args); } } while (0)
+MODULE_PARM_DESC(debug, "Debug level (0-1)");
/* addresses to scan, found only at 0x4c and/or 0x4d (7-Bit) */
static unsigned short normal_i2c[] = { I2C_ADDR_TEA6420_1, I2C_ADDR_TEA6420_2, I2C_CLIENT_END };
@@ -47,23 +51,20 @@ static unsigned short normal_i2c[] = { I2C_ADDR_TEA6420_1, I2C_ADDR_TEA6420_2, I
/* magic definition of all other variables and things */
I2C_CLIENT_INSMOD;
-static struct i2c_driver driver;
-static struct i2c_client client_template;
-
/* make a connection between the input 'i' and the output 'o'
with gain 'g' for the tea6420-client 'client' (note: i = 6 means 'mute') */
static int tea6420_switch(struct i2c_client *client, int i, int o, int g)
{
- u8 byte = 0;
+ u8 byte;
int ret;
- dprintk("adr:0x%02x, i:%d, o:%d, g:%d\n", client->addr, i, o, g);
+ v4l_dbg(1, debug, client, "i=%d, o=%d, g=%d\n", i, o, g);
/* check if the parameters are valid */
if (i < 1 || i > 6 || o < 1 || o > 4 || g < 0 || g > 6 || g % 2 != 0)
return -1;
- byte = ((o - 1) << 5);
+ byte = ((o - 1) << 5);
byte |= (i - 1);
/* to understand this, have a look at the tea6420-specs (p.5) */
@@ -83,40 +84,41 @@ static int tea6420_switch(struct i2c_client *client, int i, int o, int g)
ret = i2c_smbus_write_byte(client, byte);
if (ret) {
- dprintk("i2c_smbus_write_byte() failed, ret:%d\n", ret);
+ v4l_dbg(1, debug, client,
+ "i2c_smbus_write_byte() failed, ret:%d\n", ret);
return -EIO;
}
-
return 0;
}
-/* this function is called by i2c_probe */
-static int tea6420_detect(struct i2c_adapter *adapter, int address, int kind)
+static int tea6420_command(struct i2c_client *client, unsigned cmd, void *arg)
{
- struct i2c_client *client;
- int err = 0, i = 0;
+ struct tea6420_multiplex *a = (struct tea6420_multiplex *)arg;
+ int result = 0;
- /* let's see whether this adapter can support what we need */
- if (0 == i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE)) {
- return 0;
+ switch (cmd) {
+ case TEA6420_SWITCH:
+ result = tea6420_switch(client, a->in, a->out, a->gain);
+ break;
+ default:
+ return -ENOIOCTLCMD;
}
- /* allocate memory for client structure */
- client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (!client) {
- return -ENOMEM;
- }
+ return result;
+}
- /* fill client structure */
- memcpy(client, &client_template, sizeof(struct i2c_client));
- client->addr = address;
- client->adapter = adapter;
+/* this function is called by i2c_probe */
+static int tea6420_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int err, i;
- /* tell the i2c layer a new client has arrived */
- if (0 != (err = i2c_attach_client(client))) {
- kfree(client);
- return err;
- }
+ /* let's see whether this adapter can support what we need */
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE))
+ return -EIO;
+
+ v4l_info(client, "chip found @ 0x%x (%s)\n",
+ client->addr << 1, client->adapter->name);
/* set initial values: set "mute"-input to all outputs at gain 0 */
err = 0;
@@ -124,78 +126,35 @@ static int tea6420_detect(struct i2c_adapter *adapter, int address, int kind)
err += tea6420_switch(client, 6, i, 0);
}
if (err) {
- dprintk("could not initialize tea6420\n");
+ v4l_dbg(1, debug, client, "could not initialize tea6420\n");
kfree(client);
return -ENODEV;
}
-
- printk("tea6420: detected @ 0x%02x on adapter %s\n", address, &client->adapter->name[0]);
-
return 0;
}
-static int attach(struct i2c_adapter *adapter)
+static int tea6420_legacy_probe(struct i2c_adapter *adapter)
{
- /* let's see whether this is a know adapter we can attach to */
- if (adapter->id != I2C_HW_SAA7146) {
- dprintk("refusing to probe on unknown adapter [name='%s',id=0x%x]\n", adapter->name, adapter->id);
- return -ENODEV;
- }
-
- return i2c_probe(adapter, &addr_data, &tea6420_detect);
-}
-
-static int detach(struct i2c_client *client)
-{
- int ret = i2c_detach_client(client);
- kfree(client);
- return ret;
-}
-
-static int command(struct i2c_client *client, unsigned int cmd, void *arg)
-{
- struct tea6420_multiplex *a = (struct tea6420_multiplex *)arg;
- int result = 0;
-
- switch (cmd) {
- case TEA6420_SWITCH:
- result = tea6420_switch(client, a->in, a->out, a->gain);
- break;
- default:
- return -ENOIOCTLCMD;
- }
-
- return result;
+ /* Let's see whether this is a known adapter we can attach to.
+ Prevents conflicts with tvaudio.c. */
+ return adapter->id == I2C_HW_SAA7146;
}
-static struct i2c_driver driver = {
- .driver = {
- .name = "tea6420",
- },
- .id = I2C_DRIVERID_TEA6420,
- .attach_adapter = attach,
- .detach_client = detach,
- .command = command,
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26)
+static const struct i2c_device_id tea6420_id[] = {
+ { "tea6420", 0 },
+ { }
};
+MODULE_DEVICE_TABLE(i2c, tea6420_id);
+#endif
-static struct i2c_client client_template = {
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "tea6420",
- .driver = &driver,
+ .driverid = I2C_DRIVERID_TEA6420,
+ .command = tea6420_command,
+ .probe = tea6420_probe,
+ .legacy_probe = tea6420_legacy_probe,
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26)
+ .id_table = tea6420_id,
+#endif
};
-
-static int __init this_module_init(void)
-{
- return i2c_add_driver(&driver);
-}
-
-static void __exit this_module_exit(void)
-{
- i2c_del_driver(&driver);
-}
-
-module_init(this_module_init);
-module_exit(this_module_exit);
-
-MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
-MODULE_DESCRIPTION("tea6420 driver");
-MODULE_LICENSE("GPL");
diff --git a/linux/drivers/media/video/v4l2-common.c b/linux/drivers/media/video/v4l2-common.c
index a027d9baa..0eb498a08 100644
--- a/linux/drivers/media/video/v4l2-common.c
+++ b/linux/drivers/media/video/v4l2-common.c
@@ -188,9 +188,11 @@ const char **v4l2_ctrl_get_menu(u32 id)
NULL
};
static const char *mpeg_audio_encoding[] = {
- "Layer I",
- "Layer II",
- "Layer III",
+ "MPEG-1/2 Layer I",
+ "MPEG-1/2 Layer II",
+ "MPEG-1/2 Layer III",
+ "MPEG-2/4 AAC",
+ "AC-3",
NULL
};
static const char *mpeg_audio_l1_bitrate[] = {
@@ -244,6 +246,28 @@ const char **v4l2_ctrl_get_menu(u32 id)
"320 kbps",
NULL
};
+ static const char *mpeg_audio_ac3_bitrate[] = {
+ "32 kbps",
+ "40 kbps",
+ "48 kbps",
+ "56 kbps",
+ "64 kbps",
+ "80 kbps",
+ "96 kbps",
+ "112 kbps",
+ "128 kbps",
+ "160 kbps",
+ "192 kbps",
+ "224 kbps",
+ "256 kbps",
+ "320 kbps",
+ "384 kbps",
+ "448 kbps",
+ "512 kbps",
+ "576 kbps",
+ "640 kbps",
+ NULL
+ };
static const char *mpeg_audio_mode[] = {
"Stereo",
"Joint Stereo",
@@ -272,6 +296,7 @@ const char **v4l2_ctrl_get_menu(u32 id)
static const char *mpeg_video_encoding[] = {
"MPEG-1",
"MPEG-2",
+ "MPEG-4 AVC",
NULL
};
static const char *mpeg_video_aspect[] = {
@@ -312,6 +337,8 @@ const char **v4l2_ctrl_get_menu(u32 id)
return mpeg_audio_l2_bitrate;
case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
return mpeg_audio_l3_bitrate;
+ case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
+ return mpeg_audio_ac3_bitrate;
case V4L2_CID_MPEG_AUDIO_MODE:
return mpeg_audio_mode;
case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
@@ -336,62 +363,72 @@ const char **v4l2_ctrl_get_menu(u32 id)
}
EXPORT_SYMBOL(v4l2_ctrl_get_menu);
-/* Fill in a struct v4l2_queryctrl */
-int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def)
+/* Return the control name. */
+const char *v4l2_ctrl_get_name(u32 id)
{
- const char *name;
-
- qctrl->flags = 0;
- switch (qctrl->id) {
+ switch (id) {
/* USER controls */
- case V4L2_CID_USER_CLASS: name = "User Controls"; break;
- case V4L2_CID_AUDIO_VOLUME: name = "Volume"; break;
- case V4L2_CID_AUDIO_MUTE: name = "Mute"; break;
- case V4L2_CID_AUDIO_BALANCE: name = "Balance"; break;
- case V4L2_CID_AUDIO_BASS: name = "Bass"; break;
- case V4L2_CID_AUDIO_TREBLE: name = "Treble"; break;
- case V4L2_CID_AUDIO_LOUDNESS: name = "Loudness"; break;
- case V4L2_CID_BRIGHTNESS: name = "Brightness"; break;
- case V4L2_CID_CONTRAST: name = "Contrast"; break;
- case V4L2_CID_SATURATION: name = "Saturation"; break;
- case V4L2_CID_HUE: name = "Hue"; break;
+ case V4L2_CID_USER_CLASS: return "User Controls";
+ case V4L2_CID_AUDIO_VOLUME: return "Volume";
+ case V4L2_CID_AUDIO_MUTE: return "Mute";
+ case V4L2_CID_AUDIO_BALANCE: return "Balance";
+ case V4L2_CID_AUDIO_BASS: return "Bass";
+ case V4L2_CID_AUDIO_TREBLE: return "Treble";
+ case V4L2_CID_AUDIO_LOUDNESS: return "Loudness";
+ case V4L2_CID_BRIGHTNESS: return "Brightness";
+ case V4L2_CID_CONTRAST: return "Contrast";
+ case V4L2_CID_SATURATION: return "Saturation";
+ case V4L2_CID_HUE: return "Hue";
/* MPEG controls */
- case V4L2_CID_MPEG_CLASS: name = "MPEG Encoder Controls"; break;
- case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: name = "Audio Sampling Frequency"; break;
- case V4L2_CID_MPEG_AUDIO_ENCODING: name = "Audio Encoding Layer"; break;
- case V4L2_CID_MPEG_AUDIO_L1_BITRATE: name = "Audio Layer I Bitrate"; break;
- case V4L2_CID_MPEG_AUDIO_L2_BITRATE: name = "Audio Layer II Bitrate"; break;
- case V4L2_CID_MPEG_AUDIO_L3_BITRATE: name = "Audio Layer III Bitrate"; break;
- case V4L2_CID_MPEG_AUDIO_MODE: name = "Audio Stereo Mode"; break;
- case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: name = "Audio Stereo Mode Extension"; break;
- case V4L2_CID_MPEG_AUDIO_EMPHASIS: name = "Audio Emphasis"; break;
- case V4L2_CID_MPEG_AUDIO_CRC: name = "Audio CRC"; break;
- case V4L2_CID_MPEG_AUDIO_MUTE: name = "Audio Mute"; break;
- case V4L2_CID_MPEG_VIDEO_ENCODING: name = "Video Encoding"; break;
- case V4L2_CID_MPEG_VIDEO_ASPECT: name = "Video Aspect"; break;
- case V4L2_CID_MPEG_VIDEO_B_FRAMES: name = "Video B Frames"; break;
- case V4L2_CID_MPEG_VIDEO_GOP_SIZE: name = "Video GOP Size"; break;
- case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: name = "Video GOP Closure"; break;
- case V4L2_CID_MPEG_VIDEO_PULLDOWN: name = "Video Pulldown"; break;
- case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: name = "Video Bitrate Mode"; break;
- case V4L2_CID_MPEG_VIDEO_BITRATE: name = "Video Bitrate"; break;
- case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: name = "Video Peak Bitrate"; break;
- case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: name = "Video Temporal Decimation"; break;
- case V4L2_CID_MPEG_VIDEO_MUTE: name = "Video Mute"; break;
- case V4L2_CID_MPEG_VIDEO_MUTE_YUV: name = "Video Mute YUV"; break;
- case V4L2_CID_MPEG_STREAM_TYPE: name = "Stream Type"; break;
- case V4L2_CID_MPEG_STREAM_PID_PMT: name = "Stream PMT Program ID"; break;
- case V4L2_CID_MPEG_STREAM_PID_AUDIO: name = "Stream Audio Program ID"; break;
- case V4L2_CID_MPEG_STREAM_PID_VIDEO: name = "Stream Video Program ID"; break;
- case V4L2_CID_MPEG_STREAM_PID_PCR: name = "Stream PCR Program ID"; break;
- case V4L2_CID_MPEG_STREAM_PES_ID_AUDIO: name = "Stream PES Audio ID"; break;
- case V4L2_CID_MPEG_STREAM_PES_ID_VIDEO: name = "Stream PES Video ID"; break;
- case V4L2_CID_MPEG_STREAM_VBI_FMT: name = "Stream VBI Format"; break;
+ case V4L2_CID_MPEG_CLASS: return "MPEG Encoder Controls";
+ case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: return "Audio Sampling Frequency";
+ case V4L2_CID_MPEG_AUDIO_ENCODING: return "Audio Encoding";
+ case V4L2_CID_MPEG_AUDIO_L1_BITRATE: return "Audio Layer I Bitrate";
+ case V4L2_CID_MPEG_AUDIO_L2_BITRATE: return "Audio Layer II Bitrate";
+ case V4L2_CID_MPEG_AUDIO_L3_BITRATE: return "Audio Layer III Bitrate";
+ case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: return "Audio AC-3 Bitrate";
+ case V4L2_CID_MPEG_AUDIO_MODE: return "Audio Stereo Mode";
+ case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: return "Audio Stereo Mode Extension";
+ case V4L2_CID_MPEG_AUDIO_EMPHASIS: return "Audio Emphasis";
+ case V4L2_CID_MPEG_AUDIO_CRC: return "Audio CRC";
+ case V4L2_CID_MPEG_AUDIO_MUTE: return "Audio Mute";
+ case V4L2_CID_MPEG_VIDEO_ENCODING: return "Video Encoding";
+ case V4L2_CID_MPEG_VIDEO_ASPECT: return "Video Aspect";
+ case V4L2_CID_MPEG_VIDEO_B_FRAMES: return "Video B Frames";
+ case V4L2_CID_MPEG_VIDEO_GOP_SIZE: return "Video GOP Size";
+ case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: return "Video GOP Closure";
+ case V4L2_CID_MPEG_VIDEO_PULLDOWN: return "Video Pulldown";
+ case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: return "Video Bitrate Mode";
+ case V4L2_CID_MPEG_VIDEO_BITRATE: return "Video Bitrate";
+ case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: return "Video Peak Bitrate";
+ case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: return "Video Temporal Decimation";
+ case V4L2_CID_MPEG_VIDEO_MUTE: return "Video Mute";
+ case V4L2_CID_MPEG_VIDEO_MUTE_YUV: return "Video Mute YUV";
+ case V4L2_CID_MPEG_STREAM_TYPE: return "Stream Type";
+ case V4L2_CID_MPEG_STREAM_PID_PMT: return "Stream PMT Program ID";
+ case V4L2_CID_MPEG_STREAM_PID_AUDIO: return "Stream Audio Program ID";
+ case V4L2_CID_MPEG_STREAM_PID_VIDEO: return "Stream Video Program ID";
+ case V4L2_CID_MPEG_STREAM_PID_PCR: return "Stream PCR Program ID";
+ case V4L2_CID_MPEG_STREAM_PES_ID_AUDIO: return "Stream PES Audio ID";
+ case V4L2_CID_MPEG_STREAM_PES_ID_VIDEO: return "Stream PES Video ID";
+ case V4L2_CID_MPEG_STREAM_VBI_FMT: return "Stream VBI Format";
default:
- return -EINVAL;
+ return NULL;
}
+}
+EXPORT_SYMBOL(v4l2_ctrl_get_name);
+
+/* Fill in a struct v4l2_queryctrl */
+int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def)
+{
+ const char *name = v4l2_ctrl_get_name(qctrl->id);
+
+ qctrl->flags = 0;
+ if (name == NULL)
+ return -EINVAL;
+
switch (qctrl->id) {
case V4L2_CID_AUDIO_MUTE:
case V4L2_CID_AUDIO_LOUDNESS:
@@ -408,6 +445,7 @@ int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 ste
case V4L2_CID_MPEG_AUDIO_L1_BITRATE:
case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
+ case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
case V4L2_CID_MPEG_AUDIO_MODE:
case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
case V4L2_CID_MPEG_AUDIO_EMPHASIS:
@@ -494,7 +532,7 @@ int v4l2_ctrl_query_fill_std(struct v4l2_queryctrl *qctrl)
case V4L2_CID_MPEG_AUDIO_ENCODING:
return v4l2_ctrl_query_fill(qctrl,
V4L2_MPEG_AUDIO_ENCODING_LAYER_1,
- V4L2_MPEG_AUDIO_ENCODING_LAYER_3, 1,
+ V4L2_MPEG_AUDIO_ENCODING_AC3, 1,
V4L2_MPEG_AUDIO_ENCODING_LAYER_2);
case V4L2_CID_MPEG_AUDIO_L1_BITRATE:
return v4l2_ctrl_query_fill(qctrl,
@@ -511,6 +549,11 @@ int v4l2_ctrl_query_fill_std(struct v4l2_queryctrl *qctrl)
V4L2_MPEG_AUDIO_L3_BITRATE_32K,
V4L2_MPEG_AUDIO_L3_BITRATE_320K, 1,
V4L2_MPEG_AUDIO_L3_BITRATE_192K);
+ case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
+ return v4l2_ctrl_query_fill(qctrl,
+ V4L2_MPEG_AUDIO_AC3_BITRATE_32K,
+ V4L2_MPEG_AUDIO_AC3_BITRATE_640K, 1,
+ V4L2_MPEG_AUDIO_AC3_BITRATE_384K);
case V4L2_CID_MPEG_AUDIO_MODE:
return v4l2_ctrl_query_fill(qctrl,
V4L2_MPEG_AUDIO_MODE_STEREO,
@@ -536,7 +579,7 @@ int v4l2_ctrl_query_fill_std(struct v4l2_queryctrl *qctrl)
case V4L2_CID_MPEG_VIDEO_ENCODING:
return v4l2_ctrl_query_fill(qctrl,
V4L2_MPEG_VIDEO_ENCODING_MPEG_1,
- V4L2_MPEG_VIDEO_ENCODING_MPEG_2, 1,
+ V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC, 1,
V4L2_MPEG_VIDEO_ENCODING_MPEG_2);
case V4L2_CID_MPEG_VIDEO_ASPECT:
return v4l2_ctrl_query_fill(qctrl,
@@ -595,12 +638,17 @@ int v4l2_ctrl_query_fill_std(struct v4l2_queryctrl *qctrl)
EXPORT_SYMBOL(v4l2_ctrl_query_fill_std);
/* Fill in a struct v4l2_querymenu based on the struct v4l2_queryctrl and
- the menu. The qctrl pointer may be NULL, in which case it is ignored. */
+ the menu. The qctrl pointer may be NULL, in which case it is ignored.
+ If menu_items is NULL, then the menu items are retrieved using
+ v4l2_ctrl_get_menu. */
int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu, struct v4l2_queryctrl *qctrl,
const char **menu_items)
{
int i;
+ qmenu->reserved = 0;
+ if (menu_items == NULL)
+ menu_items = v4l2_ctrl_get_menu(qmenu->id);
if (menu_items == NULL ||
(qctrl && (qmenu->index < qctrl->minimum || qmenu->index > qctrl->maximum)))
return -EINVAL;
@@ -608,11 +656,31 @@ int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu, struct v4l2_queryctrl *qc
if (menu_items[i] == NULL || menu_items[i][0] == '\0')
return -EINVAL;
snprintf(qmenu->name, sizeof(qmenu->name), menu_items[qmenu->index]);
- qmenu->reserved = 0;
return 0;
}
EXPORT_SYMBOL(v4l2_ctrl_query_menu);
+/* Fill in a struct v4l2_querymenu based on the specified array of valid
+ menu items (terminated by V4L2_CTRL_MENU_IDS_END).
+ Use this if there are 'holes' in the list of valid menu items. */
+int v4l2_ctrl_query_menu_valid_items(struct v4l2_querymenu *qmenu, const u32 *ids)
+{
+ const char **menu_items = v4l2_ctrl_get_menu(qmenu->id);
+
+ qmenu->reserved = 0;
+ if (menu_items == NULL || ids == NULL)
+ return -EINVAL;
+ while (*ids != V4L2_CTRL_MENU_IDS_END) {
+ if (*ids++ == qmenu->index) {
+ snprintf(qmenu->name, sizeof(qmenu->name),
+ menu_items[qmenu->index]);
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+EXPORT_SYMBOL(v4l2_ctrl_query_menu_valid_items);
+
/* ctrl_classes points to an array of u32 pointers, the last element is
a NULL pointer. Each u32 array is a 0-terminated array of control IDs.
Each array must be sorted low to high and belong to the same control
diff --git a/linux/drivers/media/video/v4l2-ioctl.c b/linux/drivers/media/video/v4l2-ioctl.c
index a56e3643b..1c8fa257d 100644
--- a/linux/drivers/media/video/v4l2-ioctl.c
+++ b/linux/drivers/media/video/v4l2-ioctl.c
@@ -675,7 +675,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file,
__video_do_ioctl will be called again, with one or more
V4L2 ioctls.
********************************************************/
- if (_IOC_TYPE(cmd) == 'v')
+ if (_IOC_TYPE(cmd) == 'v' && _IOC_NR(cmd) < BASE_VIDIOCPRIVATE)
return v4l_compat_translate_ioctl(inode, file, cmd, arg,
__video_do_ioctl);
#endif
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 20:37:55 +0000