diff options
Diffstat (limited to 'linux/drivers/media/video')
116 files changed, 16888 insertions, 2406 deletions
diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig index 8de867d30..8460013a0 100644 --- a/linux/drivers/media/video/Kconfig +++ b/linux/drivers/media/video/Kconfig @@ -312,6 +312,14 @@ config VIDEO_OV7670 OV7670 VGA camera. It currently only works with the M88ALP01 controller. +config VIDEO_MT9V011 + tristate "Micron mt9v011 sensor support" + depends on I2C && VIDEO_V4L2 + ---help--- + This is a Video4Linux2 sensor-level driver for the Micron + mt0v011 1.3 Mpixel camera. It currently only works with the + em28xx driver. + config VIDEO_TCM825X tristate "TCM825x camera sensor support" depends on I2C && VIDEO_V4L2 @@ -485,6 +493,28 @@ config VIDEO_UPD64083 endmenu # encoder / decoder chips +config DISPLAY_DAVINCI_DM646X_EVM + tristate "DM646x EVM Video Display" + depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM + select VIDEOBUF_DMA_CONTIG + select VIDEO_DAVINCI_VPIF + select VIDEO_ADV7343 + select VIDEO_THS7303 + help + Support for DaVinci based display device. + + To compile this driver as a module, choose M here: the + module will be called davincihd_display. + +config VIDEO_DAVINCI_VPIF + tristate "DaVinci VPIF Driver" + depends on DISPLAY_DAVINCI_DM646X_EVM + help + Support for DaVinci VPIF Driver. + + To compile this driver as a module, choose M here: the + module will be called vpif. + config VIDEO_VIVI tristate "Virtual Video Driver" depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 @@ -497,6 +527,55 @@ config VIDEO_VIVI Say Y here if you want to test video apps or debug V4L devices. In doubt, say N. +config VIDEO_VPSS_SYSTEM + tristate "VPSS System module driver" + depends on ARCH_DAVINCI + help + Support for vpss system module for video driver + default y + +config VIDEO_VPFE_CAPTURE + tristate "VPFE Video Capture Driver" + depends on VIDEO_V4L2 && ARCH_DAVINCI + select VIDEOBUF_DMA_CONTIG + help + Support for DMXXXX VPFE based frame grabber. This is the + common V4L2 module for following DMXXX SoCs from Texas + Instruments:- DM6446 & DM355. + + To compile this driver as a module, choose M here: the + module will be called vpfe-capture. + +config VIDEO_DM6446_CCDC + tristate "DM6446 CCDC HW module" + depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE + select VIDEO_VPSS_SYSTEM + default y + help + Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from slave decoders. + + To compile this driver as a module, choose M here: the + module will be called vpfe. + +config VIDEO_DM355_CCDC + tristate "DM355 CCDC HW module" + depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE + select VIDEO_VPSS_SYSTEM + default y + help + Enables DM355 CCD hw module. DM355 CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from a slave decoders + + To compile this driver as a module, choose M here: the + module will be called vpfe. + source "drivers/media/video/bt8xx/Kconfig" config VIDEO_PMS @@ -776,10 +855,14 @@ config VIDEO_MX1 ---help--- This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface +config MX3_VIDEO + bool + config VIDEO_MX3 tristate "i.MX3x Camera Sensor Interface driver" depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA select VIDEOBUF_DMA_CONTIG + select MX3_VIDEO ---help--- This is a v4l2 driver for the i.MX3x Camera Sensor Interface @@ -862,9 +945,13 @@ config USB_W9968CF module will be called w9968cf. config USB_OV511 - tristate "USB OV511 Camera support" + tristate "USB OV511 Camera support (DEPRECATED)" depends on VIDEO_V4L1 ---help--- + This driver is DEPRECATED please use the gspca ov519 module + instead. Note that for the ov511 / ov518 support of the gspca module + you need atleast version 0.6.0 of libv4l. + Say Y here if you want to connect this type of camera to your computer's USB port. See <file:Documentation/video4linux/ov511.txt> for more information and for a list of supported cameras. diff --git a/linux/drivers/media/video/Makefile b/linux/drivers/media/video/Makefile index f7d9a4c6f..00fb23e64 100644 --- a/linux/drivers/media/video/Makefile +++ b/linux/drivers/media/video/Makefile @@ -12,6 +12,8 @@ omap2cam-objs := omap24xxcam.o omap24xxcam-dma.o videodev-objs := v4l2-dev.o v4l2-ioctl.o v4l2-device.o +# V4L2 core modules + obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-int-device.o ifeq ($(CONFIG_COMPAT),y) obj-$(CONFIG_VIDEO_DEV) += v4l2-compat-ioctl32.o @@ -23,21 +25,15 @@ ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y) obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o endif -obj-$(CONFIG_VIDEO_TUNER) += tuner.o +# All i2c modules must come first: -obj-$(CONFIG_VIDEO_BT848) += bt8xx/ -obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o +obj-$(CONFIG_VIDEO_TUNER) += tuner.o obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o obj-$(CONFIG_VIDEO_TDA9875) += tda9875.o - obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o obj-$(CONFIG_VIDEO_SAA5246A) += saa5246a.o obj-$(CONFIG_VIDEO_SAA5249) += saa5249.o -obj-$(CONFIG_VIDEO_CQCAM) += c-qcam.o -obj-$(CONFIG_VIDEO_BWQCAM) += bw-qcam.o -obj-$(CONFIG_VIDEO_W9966) += w9966.o - obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o obj-$(CONFIG_VIDEO_TEA6420) += tea6420.o @@ -56,11 +52,41 @@ obj-$(CONFIG_VIDEO_BT856) += bt856.o obj-$(CONFIG_VIDEO_BT866) += bt866.o obj-$(CONFIG_VIDEO_KS0127) += ks0127.o obj-$(CONFIG_VIDEO_THS7303) += ths7303.o +obj-$(CONFIG_VIDEO_VINO) += indycam.o +obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o +obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o +obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o +obj-$(CONFIG_VIDEO_CS5345) += cs5345.o +obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o +obj-$(CONFIG_VIDEO_M52790) += m52790.o +obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o +obj-$(CONFIG_VIDEO_WM8775) += wm8775.o +obj-$(CONFIG_VIDEO_WM8739) += wm8739.o +obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o +obj-$(CONFIG_VIDEO_CX25840) += cx25840/ +obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o +obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o +obj-$(CONFIG_VIDEO_OV7670) += ov7670.o +obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o +obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o +obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o -obj-$(CONFIG_VIDEO_ZORAN) += zoran/ +obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o +obj-$(CONFIG_SOC_CAMERA_MT9M111) += mt9m111.o +obj-$(CONFIG_SOC_CAMERA_MT9T031) += mt9t031.o +obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o +obj-$(CONFIG_SOC_CAMERA_OV772X) += ov772x.o +obj-$(CONFIG_SOC_CAMERA_TW9910) += tw9910.o +# And now the v4l2 drivers: + +obj-$(CONFIG_VIDEO_BT848) += bt8xx/ +obj-$(CONFIG_VIDEO_ZORAN) += zoran/ +obj-$(CONFIG_VIDEO_CQCAM) += c-qcam.o +obj-$(CONFIG_VIDEO_BWQCAM) += bw-qcam.o +obj-$(CONFIG_VIDEO_W9966) += w9966.o obj-$(CONFIG_VIDEO_PMS) += pms.o -obj-$(CONFIG_VIDEO_VINO) += vino.o indycam.o +obj-$(CONFIG_VIDEO_VINO) += vino.o obj-$(CONFIG_VIDEO_STRADIS) += stradis.o obj-$(CONFIG_VIDEO_CPIA) += cpia.o obj-$(CONFIG_VIDEO_CPIA_PP) += cpia_pp.o @@ -71,17 +97,7 @@ obj-$(CONFIG_VIDEO_CX88) += cx88/ obj-$(CONFIG_VIDEO_EM28XX) += em28xx/ obj-$(CONFIG_VIDEO_CX231XX) += cx231xx/ obj-$(CONFIG_VIDEO_USBVISION) += usbvision/ -obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o -obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/ -obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o -obj-$(CONFIG_VIDEO_CS5345) += cs5345.o -obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o -obj-$(CONFIG_VIDEO_M52790) += m52790.o -obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o -obj-$(CONFIG_VIDEO_WM8775) += wm8775.o -obj-$(CONFIG_VIDEO_WM8739) += wm8739.o -obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip/ obj-$(CONFIG_VIDEO_CPIA2) += cpia2/ obj-$(CONFIG_VIDEO_MXB) += mxb.o @@ -94,19 +110,12 @@ obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o obj-$(CONFIG_VIDEOBUF_VMALLOC) += videobuf-vmalloc.o obj-$(CONFIG_VIDEOBUF_DVB) += videobuf-dvb.o obj-$(CONFIG_VIDEO_BTCX) += btcx-risc.o -obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o -obj-$(CONFIG_VIDEO_CX25840) += cx25840/ -obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o -obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o -obj-$(CONFIG_VIDEO_OV7670) += ov7670.o - -obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o obj-$(CONFIG_USB_DABUSB) += dabusb.o obj-$(CONFIG_USB_OV511) += ov511.o @@ -138,23 +147,23 @@ obj-$(CONFIG_VIDEO_CX23885) += cx23885/ obj-$(CONFIG_VIDEO_OMAP2) += omap2cam.o obj-$(CONFIG_SOC_CAMERA) += soc_camera.o -obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o -obj-$(CONFIG_SOC_CAMERA_MT9M111) += mt9m111.o -obj-$(CONFIG_SOC_CAMERA_MT9T031) += mt9t031.o -obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o -obj-$(CONFIG_SOC_CAMERA_OV772X) += ov772x.o obj-$(CONFIG_SOC_CAMERA_PLATFORM) += soc_camera_platform.o -obj-$(CONFIG_SOC_CAMERA_TW9910) += tw9910.o # soc-camera host drivers have to be linked after camera drivers obj-$(CONFIG_VIDEO_MX1) += mx1_camera.o obj-$(CONFIG_VIDEO_MX3) += mx3_camera.o obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o +obj-$(CONFIG_ARCH_DAVINCI) += davinci/ + obj-$(CONFIG_VIDEO_AU0828) += au0828/ obj-$(CONFIG_USB_VIDEO_CLASS) += uvc/ +obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o + +obj-$(CONFIG_ARCH_DAVINCI) += davinci/ + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core EXTRA_CFLAGS += -Idrivers/media/dvb/frontends EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/linux/drivers/media/video/adv7343.c b/linux/drivers/media/video/adv7343.c index 30f5caf5d..df26f2fe4 100644 --- a/linux/drivers/media/video/adv7343.c +++ b/linux/drivers/media/video/adv7343.c @@ -24,7 +24,6 @@ #include <linux/module.h> #include <linux/videodev2.h> #include <linux/uaccess.h> -#include <linux/version.h> #include <media/adv7343.h> #include <media/v4l2-device.h> diff --git a/linux/drivers/media/video/au0828/au0828-i2c.c b/linux/drivers/media/video/au0828/au0828-i2c.c index a589d2ccb..bbe38a7a2 100644 --- a/linux/drivers/media/video/au0828/au0828-i2c.c +++ b/linux/drivers/media/video/au0828/au0828-i2c.c @@ -326,6 +326,9 @@ static struct i2c_adapter au0828_i2c_adap_template = { .owner = THIS_MODULE, .id = I2C_HW_B_AU0828, .algo = &au0828_i2c_algo_template, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26) + .class = I2C_CLASS_TV_ANALOG, +#endif }; static struct i2c_client au0828_i2c_client_template = { diff --git a/linux/drivers/media/video/bt8xx/bttv-driver.c b/linux/drivers/media/video/bt8xx/bttv-driver.c index 67d06eb6c..9c25efe06 100644 --- a/linux/drivers/media/video/bt8xx/bttv-driver.c +++ b/linux/drivers/media/video/bt8xx/bttv-driver.c @@ -2679,6 +2679,8 @@ static int bttv_querycap(struct file *file, void *priv, V4L2_CAP_VBI_CAPTURE | V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; + if (btv->has_saa6588) + cap->capabilities |= V4L2_CAP_RDS_CAPTURE; if (no_overlay <= 0) cap->capabilities |= V4L2_CAP_VIDEO_OVERLAY; @@ -3180,6 +3182,7 @@ static unsigned int bttv_poll(struct file *file, poll_table *wait) struct bttv_fh *fh = file->private_data; struct bttv_buffer *buf; enum v4l2_field field; + unsigned int rc = POLLERR; if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) { if (!check_alloc_btres(fh->btv,fh,RESOURCE_VBI)) @@ -3188,9 +3191,10 @@ static unsigned int bttv_poll(struct file *file, poll_table *wait) } if (check_btres(fh,RESOURCE_VIDEO_STREAM)) { + mutex_lock(&fh->cap.vb_lock); /* streaming capture */ if (list_empty(&fh->cap.stream)) - return POLLERR; + goto err; buf = list_entry(fh->cap.stream.next,struct bttv_buffer,vb.stream); } else { /* read() capture */ @@ -3219,11 +3223,12 @@ static unsigned int bttv_poll(struct file *file, poll_table *wait) poll_wait(file, &buf->vb.done, wait); if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR) - return POLLIN|POLLRDNORM; - return 0; + rc = POLLIN|POLLRDNORM; + else + rc = 0; err: mutex_unlock(&fh->cap.vb_lock); - return POLLERR; + return rc; } static int bttv_open(struct file *file) @@ -4625,14 +4630,10 @@ static int bttv_resume(struct pci_dev *pci_dev) #endif static struct pci_device_id bttv_pci_tbl[] = { - {PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT879, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT848), 0}, + {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT849), 0}, + {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT878), 0}, + {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT879), 0}, {0,} }; diff --git a/linux/drivers/media/video/cx18/cx18-cards.c b/linux/drivers/media/video/cx18/cx18-cards.c index fa755a982..c0abf3476 100644 --- a/linux/drivers/media/video/cx18/cx18-cards.c +++ b/linux/drivers/media/video/cx18/cx18-cards.c @@ -198,11 +198,14 @@ static const struct cx18_card_pci_info cx18_pci_mpc718[] = { static const struct cx18_card cx18_card_mpc718 = { .type = CX18_CARD_YUAN_MPC718, - .name = "Yuan MPC718", - .comment = "Analog video capture works; some audio line in may not.\n", + .name = "Yuan MPC718 MiniPCI DVB-T/Analog", + .comment = "Experimenters needed for device to work well.\n" + "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", .v4l2_capabilities = CX18_CAP_ENCODER, .hw_audio_ctrl = CX18_HW_418_AV, - .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_RESET_CTRL, + .hw_muxer = CX18_HW_GPIO_MUX, + .hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER | + CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL, .video_inputs = { { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, { CX18_CARD_INPUT_SVIDEO1, 1, @@ -211,27 +214,34 @@ static const struct cx18_card cx18_card_mpc718 = { { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 }, { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 }, - { CX18_CARD_INPUT_COMPOSITE3, 2, CX18_AV_COMPOSITE3 }, }, .audio_inputs = { { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, - { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 0 }, - { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL1, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 }, + { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL2, 1 }, }, - .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL1, 0 }, .tuners = { /* XC3028 tuner */ { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, }, + /* FIXME - the FM radio is just a guess and driver doesn't use SIF */ + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 }, .ddr = { - /* Probably Samsung K4D263238G-VC33 memory */ - .chip_config = 0x003, - .refresh = 0x30c, - .timing1 = 0x23230b73, - .timing2 = 0x08, + /* Hynix HY5DU283222B DDR RAM */ + .chip_config = 0x303, + .refresh = 0x3bd, + .timing1 = 0x36320966, + .timing2 = 0x1f, .tune_lane = 0, .initial_emrs = 2, }, + .gpio_init.initial_value = 0x1, + .gpio_init.direction = 0x3, + /* FIXME - these GPIO's are just guesses */ + .gpio_audio_input = { .mask = 0x3, + .tuner = 0x1, + .linein = 0x3, + .radio = 0x1 }, .xceive_pin = 0, .pci_list = cx18_pci_mpc718, .i2c = &cx18_i2c_std, diff --git a/linux/drivers/media/video/cx18/cx18-controls.c b/linux/drivers/media/video/cx18/cx18-controls.c index 8e35c3aed..5136df198 100644 --- a/linux/drivers/media/video/cx18/cx18-controls.c +++ b/linux/drivers/media/video/cx18/cx18-controls.c @@ -61,6 +61,8 @@ int cx18_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl) switch (qctrl->id) { /* Standard V4L2 controls */ + case V4L2_CID_USER_CLASS: + return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0); case V4L2_CID_BRIGHTNESS: case V4L2_CID_HUE: case V4L2_CID_SATURATION: diff --git a/linux/drivers/media/video/cx18/cx18-driver.c b/linux/drivers/media/video/cx18/cx18-driver.c index 7ffdda49c..ae13a1546 100644 --- a/linux/drivers/media/video/cx18/cx18-driver.c +++ b/linux/drivers/media/video/cx18/cx18-driver.c @@ -268,6 +268,20 @@ static void cx18_iounmap(struct cx18 *cx) } } +static void cx18_eeprom_dump(struct cx18 *cx, unsigned char *eedata, int len) +{ + int i; + + CX18_INFO("eeprom dump:\n"); + for (i = 0; i < len; i++) { + if (0 == (i % 16)) + CX18_INFO("eeprom %02x:", i); + printk(KERN_CONT " %02x", eedata[i]); + if (15 == (i % 16)) + printk(KERN_CONT "\n"); + } +} + /* Hauppauge card? get values from tveeprom */ void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv) { @@ -279,8 +293,26 @@ void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv) c.adapter = &cx->i2c_adap[0]; c.addr = 0xA0 >> 1; - tveeprom_read(&c, eedata, sizeof(eedata)); - tveeprom_hauppauge_analog(&c, tv, eedata); + memset(tv, 0, sizeof(*tv)); + if (tveeprom_read(&c, eedata, sizeof(eedata))) + return; + + switch (cx->card->type) { + case CX18_CARD_HVR_1600_ESMT: + case CX18_CARD_HVR_1600_SAMSUNG: + tveeprom_hauppauge_analog(&c, tv, eedata); + break; + case CX18_CARD_YUAN_MPC718: + tv->model = 0x718; + cx18_eeprom_dump(cx, eedata, sizeof(eedata)); + CX18_INFO("eeprom PCI ID: %02x%02x:%02x%02x\n", + eedata[2], eedata[1], eedata[4], eedata[3]); + break; + default: + tv->model = 0xffffffff; + cx18_eeprom_dump(cx, eedata, sizeof(eedata)); + break; + } } static void cx18_process_eeprom(struct cx18 *cx) @@ -298,6 +330,11 @@ static void cx18_process_eeprom(struct cx18 *cx) case 74000 ... 74999: cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT); break; + case 0x718: + return; + case 0xffffffff: + CX18_INFO("Unknown EEPROM encoding\n"); + return; case 0: CX18_ERR("Invalid EEPROM\n"); return; diff --git a/linux/drivers/media/video/cx18/cx18-dvb.c b/linux/drivers/media/video/cx18/cx18-dvb.c index 6ea3fe623..51a0c33b2 100644 --- a/linux/drivers/media/video/cx18/cx18-dvb.c +++ b/linux/drivers/media/video/cx18/cx18-dvb.c @@ -30,6 +30,10 @@ #include "s5h1409.h" #include "mxl5005s.h" #include "zl10353.h" + +#include <linux/firmware.h> +#include "mt352.h" +#include "mt352_priv.h" #include "tuner-xc2028.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -38,6 +42,11 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); #define CX18_CLOCK_ENABLE2 0xc71024 #define CX18_DMUX_CLK_MASK 0x0080 +/* + * CX18_CARD_HVR_1600_ESMT + * CX18_CARD_HVR_1600_SAMSUNG + */ + static struct mxl5005s_config hauppauge_hvr1600_tuner = { .i2c_address = 0xC6 >> 1, .if_freq = IF_FREQ_5380000HZ, @@ -65,6 +74,9 @@ static struct s5h1409_config hauppauge_hvr1600_config = { .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK }; +/* + * CX18_CARD_LEADTEK_DVR3100H + */ /* Information/confirmation of proper config values provided by Terry Wu */ static struct zl10353_config leadtek_dvr3100h_demod = { .demod_address = 0x1e >> 1, /* Datasheet suggested straps */ @@ -74,6 +86,121 @@ static struct zl10353_config leadtek_dvr3100h_demod = { .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */ }; +/* + * CX18_CARD_YUAN_MPC718 + */ +/* + * Due to + * + * 1. an absence of information on how to prgram the MT352 + * 2. the Linux mt352 module pushing MT352 initialzation off onto us here + * + * We have to use an init sequence that *you* must extract from the Windows + * driver (yuanrap.sys) and which we load as a firmware. + * + * If someone can provide me with a Zarlink MT352 (Intel CE6352?) Design Manual + * with chip programming details, then I can remove this annoyance. + */ +static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream, + const struct firmware **fw) +{ + struct cx18 *cx = stream->cx; + const char *fn = "dvb-cx18-mpc718-mt352.fw"; + int ret; + + ret = request_firmware(fw, fn, &cx->pci_dev->dev); + if (ret) + CX18_ERR("Unable to open firmware file %s\n", fn); + else { + size_t sz = (*fw)->size; + if (sz < 2 || sz > 64 || (sz % 2) != 0) { + CX18_ERR("Firmware %s has a bad size: %lu bytes\n", + fn, (unsigned long) sz); + ret = -EILSEQ; + release_firmware(*fw); + *fw = NULL; + } + } + + if (ret) { + CX18_ERR("The MPC718 board variant with the MT352 DVB-T" + "demodualtor will not work without it\n"); + CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware " + "mpc718' if you need the firmware\n"); + } + return ret; +} + +static int yuan_mpc718_mt352_init(struct dvb_frontend *fe) +{ + struct cx18_dvb *dvb = container_of(fe->dvb, + struct cx18_dvb, dvb_adapter); + struct cx18_stream *stream = container_of(dvb, struct cx18_stream, dvb); + const struct firmware *fw = NULL; + int ret; + int i; + u8 buf[3]; + + ret = yuan_mpc718_mt352_reqfw(stream, &fw); + if (ret) + return ret; + + /* Loop through all the register-value pairs in the firmware file */ + for (i = 0; i < fw->size; i += 2) { + buf[0] = fw->data[i]; + /* Intercept a few registers we want to set ourselves */ + switch (buf[0]) { + case TRL_NOMINAL_RATE_0: + /* Set our custom OFDM bandwidth in the case below */ + break; + case TRL_NOMINAL_RATE_1: + /* 6 MHz: 64/7 * 6/8 / 20.48 * 2^16 = 0x55b6.db6 */ + /* 7 MHz: 64/7 * 7/8 / 20.48 * 2^16 = 0x6400 */ + /* 8 MHz: 64/7 * 8/8 / 20.48 * 2^16 = 0x7249.249 */ + buf[1] = 0x72; + buf[2] = 0x49; + mt352_write(fe, buf, 3); + break; + case INPUT_FREQ_0: + /* Set our custom IF in the case below */ + break; + case INPUT_FREQ_1: + /* 4.56 MHz IF: (20.48 - 4.56)/20.48 * 2^14 = 0x31c0 */ + buf[1] = 0x31; + buf[2] = 0xc0; + mt352_write(fe, buf, 3); + break; + default: + /* Pass through the register-value pair from the fw */ + buf[1] = fw->data[i+1]; + mt352_write(fe, buf, 2); + break; + } + } + + buf[0] = (u8) TUNER_GO; + buf[1] = 0x01; /* Go */ + mt352_write(fe, buf, 2); + release_firmware(fw); + return 0; +} + +static struct mt352_config yuan_mpc718_mt352_demod = { + .demod_address = 0x1e >> 1, + .adc_clock = 20480, /* 20.480 MHz */ + .if2 = 4560, /* 4.560 MHz */ + .no_tuner = 1, /* XC3028 is not behind the gate */ + .demod_init = yuan_mpc718_mt352_init, +}; + +static struct zl10353_config yuan_mpc718_zl10353_demod = { + .demod_address = 0x1e >> 1, /* Datasheet suggested straps */ + .if2 = 45600, /* 4.560 MHz IF from the XC3028 */ + .parallel_ts = 1, /* Not a serial TS */ + .no_tuner = 1, /* XC3028 is not behind the gate */ + .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */ +}; + static int dvb_register(struct cx18_stream *stream); /* Kernel DVB framework calls this when the feed needs to start. @@ -113,6 +240,7 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed) break; case CX18_CARD_LEADTEK_DVR3100H: + case CX18_CARD_YUAN_MPC718: default: /* Assumption - Parallel transport - Signalling * undefined or default. @@ -326,6 +454,38 @@ static int dvb_register(struct cx18_stream *stream) fe->ops.tuner_ops.set_config(fe, &ctrl); } break; + case CX18_CARD_YUAN_MPC718: + /* + * TODO + * Apparently, these cards also could instead have a + * DiBcom demod supported by one of the db7000 drivers + */ + dvb->fe = dvb_attach(mt352_attach, + &yuan_mpc718_mt352_demod, + &cx->i2c_adap[1]); + if (dvb->fe == NULL) + dvb->fe = dvb_attach(zl10353_attach, + &yuan_mpc718_zl10353_demod, + &cx->i2c_adap[1]); + if (dvb->fe != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &cx->i2c_adap[1], + .i2c_addr = 0xc2 >> 1, + .ctrl = NULL, + }; + static struct xc2028_ctrl ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + .type = XC2028_AUTO, + }; + + fe = dvb_attach(xc2028_attach, dvb->fe, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctrl); + } + break; default: /* No Digital Tv Support */ break; diff --git a/linux/drivers/media/video/cx18/cx18-fileops.c b/linux/drivers/media/video/cx18/cx18-fileops.c index 817bb9263..227c99f24 100644 --- a/linux/drivers/media/video/cx18/cx18-fileops.c +++ b/linux/drivers/media/video/cx18/cx18-fileops.c @@ -726,7 +726,7 @@ int cx18_v4l2_open(struct file *filp) int res; struct video_device *video_dev = video_devdata(filp); struct cx18_stream *s = video_get_drvdata(video_dev); - struct cx18 *cx = s->cx;; + struct cx18 *cx = s->cx; mutex_lock(&cx->serialize_lock); if (cx18_init_on_first_open(cx)) { diff --git a/linux/drivers/media/video/cx18/cx18-ioctl.c b/linux/drivers/media/video/cx18/cx18-ioctl.c index 65e2ef425..107b57880 100644 --- a/linux/drivers/media/video/cx18/cx18-ioctl.c +++ b/linux/drivers/media/video/cx18/cx18-ioctl.c @@ -613,7 +613,7 @@ int cx18_s_input(struct file *file, void *fh, unsigned int inp) if (ret) return ret; - if (inp < 0 || inp >= cx->nof_inputs) + if (inp >= cx->nof_inputs) return -EINVAL; if (inp == cx->active_input) { diff --git a/linux/drivers/media/video/cx231xx/cx231xx-avcore.c b/linux/drivers/media/video/cx231xx/cx231xx-avcore.c index bbbb3f50e..28f48f41f 100644 --- a/linux/drivers/media/video/cx231xx/cx231xx-avcore.c +++ b/linux/drivers/media/video/cx231xx/cx231xx-avcore.c @@ -2046,7 +2046,7 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type) int cx231xx_capture_start(struct cx231xx *dev, int start, u8 media_type) { - int rc; + int rc = -1; u32 ep_mask = -1; struct pcb_config *pcb_config; diff --git a/linux/drivers/media/video/cx231xx/cx231xx-video.c b/linux/drivers/media/video/cx231xx/cx231xx-video.c index e00edd0aa..7e5bfcc94 100644 --- a/linux/drivers/media/video/cx231xx/cx231xx-video.c +++ b/linux/drivers/media/video/cx231xx/cx231xx-video.c @@ -923,8 +923,8 @@ static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, f->fmt.pix.width = dev->width; f->fmt.pix.height = dev->height; - f->fmt.pix.pixelformat = dev->format->fourcc;; - f->fmt.pix.bytesperline = (dev->width * dev->format->depth + 7) >> 3;; + f->fmt.pix.pixelformat = dev->format->fourcc; + f->fmt.pix.bytesperline = (dev->width * dev->format->depth + 7) >> 3; f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * dev->height; f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; diff --git a/linux/drivers/media/video/cx2341x.c b/linux/drivers/media/video/cx2341x.c index 2cf0c5fee..8c468fc86 100644 --- a/linux/drivers/media/video/cx2341x.c +++ b/linux/drivers/media/video/cx2341x.c @@ -501,6 +501,8 @@ int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params, int err; switch (qctrl->id) { + case V4L2_CID_MPEG_CLASS: + return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0); case V4L2_CID_MPEG_STREAM_TYPE: return v4l2_ctrl_query_fill(qctrl, V4L2_MPEG_STREAM_TYPE_MPEG2_PS, diff --git a/linux/drivers/media/video/cx23885/cx23885-cards.c b/linux/drivers/media/video/cx23885/cx23885-cards.c index 35b2abd6a..bf426f041 100644 --- a/linux/drivers/media/video/cx23885/cx23885-cards.c +++ b/linux/drivers/media/video/cx23885/cx23885-cards.c @@ -202,6 +202,10 @@ struct cx23885_board cx23885_boards[] = { .name = "Mygica X8506 DMB-TH", .portb = CX23885_MPEG_DVB, }, + [CX23885_BOARD_MAGICPRO_PROHDTVE2] = { + .name = "Magic-Pro ProHDTV Extreme 2", + .portb = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -325,6 +329,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x14f1, .subdevice = 0x8651, .card = CX23885_BOARD_MYGICA_X8506, + }, { + .subvendor = 0x14f1, + .subdevice = 0x8657, + .card = CX23885_BOARD_MAGICPRO_PROHDTVE2, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -716,8 +724,9 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) cx23885_gpio_set(dev, GPIO_9); break; case CX23885_BOARD_MYGICA_X8506: + case CX23885_BOARD_MAGICPRO_PROHDTVE2: /* GPIO-1 reset XC5000 */ - /* GPIO-2 reset LGS8GL5 */ + /* GPIO-2 reset LGS8GL5 / LGS8G75 */ cx_set(GP0_IO, 0x00060000); cx_clear(GP0_IO, 0x00000006); mdelay(100); @@ -828,6 +837,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; case CX23885_BOARD_MYGICA_X8506: + case CX23885_BOARD_MAGICPRO_PROHDTVE2: ts1->gen_ctrl_val = 0x5; /* Parallel */ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c index 9c3259b22..85fac41e7 100644 --- a/linux/drivers/media/video/cx23885/cx23885-dvb.c +++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c @@ -46,6 +46,7 @@ #include "dibx000_common.h" #include "zl10353.h" #include "stv0900.h" +#include "stv0900_reg.h" #include "stv6110.h" #include "lnbh24.h" #include "cx24116.h" @@ -243,12 +244,22 @@ static struct tda18271_std_map hauppauge_tda18271_std_map = { .if_lvl = 6, .rfagc_top = 0x37 }, }; +static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = { + .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, + .if_lvl = 1, .rfagc_top = 0x37, }, +}; + static struct tda18271_config hauppauge_tda18271_config = { .std_map = &hauppauge_tda18271_std_map, .gate = TDA18271_GATE_ANALOG, }; static struct tda18271_config hauppauge_hvr1200_tuner_config = { + .std_map = &hauppauge_hvr1200_tda18271_std_map, .gate = TDA18271_GATE_ANALOG, }; @@ -371,13 +382,25 @@ static struct zl10353_config dvico_fusionhdtv_xc3028 = { .disable_i2c_gate_ctrl = 1, }; +static struct stv0900_reg stv0900_ts_regs[] = { + { R0900_TSGENERAL, 0x00 }, + { R0900_P1_TSSPEED, 0x40 }, + { R0900_P2_TSSPEED, 0x40 }, + { R0900_P1_TSCFGM, 0xc0 }, + { R0900_P2_TSCFGM, 0xc0 }, + { R0900_P1_TSCFGH, 0xe0 }, + { R0900_P2_TSCFGH, 0xe0 }, + { R0900_P1_TSCFGL, 0x20 }, + { R0900_P2_TSCFGL, 0x20 }, + { 0xffff, 0xff }, /* terminate */ +}; + static struct stv0900_config netup_stv0900_config = { .demod_address = 0x68, .xtal = 27000000, .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ .diseqc_mode = 2,/* 2/3 PWM */ - .path1_mode = 2,/*Serial continues clock */ - .path2_mode = 2,/*Serial continues clock */ + .ts_config_regs = stv0900_ts_regs, .tun1_maddress = 0,/* 0x60 */ .tun2_maddress = 3,/* 0x63 */ .tun1_adc = 1,/* 1 Vpp */ @@ -441,6 +464,50 @@ static struct xc5000_config mygica_x8506_xc5000_config = { .if_khz = 5380, }; +static int cx23885_dvb_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *param) +{ + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1275: + switch (param->u.vsb.modulation) { + case VSB_8: + cx23885_gpio_clear(dev, GPIO_5); + break; + case QAM_64: + case QAM_256: + default: + cx23885_gpio_set(dev, GPIO_5); + break; + } + break; + } + return (port->set_frontend_save) ? + port->set_frontend_save(fe, param) : -ENODEV; +} + +static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = { + .prod = LGS8GXX_PROD_LGS8G75, + .demod_address = 0x19, + .serial_ts = 0, + .ts_clk_pol = 1, + .ts_clk_gated = 1, + .if_clk_freq = 30400, /* 30.4 MHz */ + .if_freq = 6500, /* 6.50 MHz */ + .if_neg_center = 1, + .ext_adc = 0, + .adc_signed = 1, + .adc_vpp = 2, /* 1.6 Vpp */ + .if_neg_edge = 1, +}; + +static struct xc5000_config magicpro_prohdtve2_xc5000_config = { + .i2c_address = 0x61, + .if_khz = 6500, +}; + static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; @@ -480,6 +547,12 @@ static int dvb_register(struct cx23885_tsport *port) 0x60, &dev->i2c_bus[1].i2c_adap, &hauppauge_hvr127x_config); } + + /* FIXME: temporary hack */ + /* define bridge override to set_frontend */ + port->set_frontend_save = fe0->dvb.frontend->ops.set_frontend; + fe0->dvb.frontend->ops.set_frontend = cx23885_dvb_set_frontend; + break; case CX23885_BOARD_HAUPPAUGE_HVR1255: i2c_bus = &dev->i2c_bus[0]; @@ -737,7 +810,8 @@ static int dvb_register(struct cx23885_tsport *port) if (!dvb_attach(lnbh24_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, - LNBH24_PCL, 0, 0x09)) + LNBH24_PCL, + LNBH24_TTX, 0x09)) printk(KERN_ERR "No LNBH24 found!\n"); @@ -757,7 +831,8 @@ static int dvb_register(struct cx23885_tsport *port) if (!dvb_attach(lnbh24_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, - LNBH24_PCL, 0, 0x0a)) + LNBH24_PCL, + LNBH24_TTX, 0x0a)) printk(KERN_ERR "No LNBH24 found!\n"); @@ -779,6 +854,19 @@ static int dvb_register(struct cx23885_tsport *port) &mygica_x8506_xc5000_config); } break; + case CX23885_BOARD_MAGICPRO_PROHDTVE2: + i2c_bus = &dev->i2c_bus[0]; + i2c_bus2 = &dev->i2c_bus[1]; + fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, + &magicpro_prohdtve2_lgs8g75_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(xc5000_attach, + fe0->dvb.frontend, + &i2c_bus2->i2c_adap, + &magicpro_prohdtve2_xc5000_config); + } + break; default: printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " " isn't supported yet\n", diff --git a/linux/drivers/media/video/cx23885/cx23885-video.c b/linux/drivers/media/video/cx23885/cx23885-video.c index 378943605..2248e0216 100644 --- a/linux/drivers/media/video/cx23885/cx23885-video.c +++ b/linux/drivers/media/video/cx23885/cx23885-video.c @@ -865,6 +865,7 @@ static unsigned int video_poll(struct file *file, { struct cx23885_fh *fh = file->private_data; struct cx23885_buffer *buf; + unsigned int rc = POLLERR; if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) { if (!res_get(fh->dev, fh, RESOURCE_VBI)) @@ -872,23 +873,28 @@ static unsigned int video_poll(struct file *file, return videobuf_poll_stream(file, &fh->vbiq, wait); } + mutex_lock(&fh->vidq.vb_lock); if (res_check(fh, RESOURCE_VIDEO)) { /* streaming capture */ if (list_empty(&fh->vidq.stream)) - return POLLERR; + goto done; buf = list_entry(fh->vidq.stream.next, struct cx23885_buffer, vb.stream); } else { /* read() capture */ buf = (struct cx23885_buffer *)fh->vidq.read_buf; if (NULL == buf) - return POLLERR; + goto done; } poll_wait(file, &buf->vb.done, wait); if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR) - return POLLIN|POLLRDNORM; - return 0; + rc = POLLIN|POLLRDNORM; + else + rc = 0; +done: + mutex_unlock(&fh->vidq.vb_lock); + return rc; } static int video_release(struct file *file) diff --git a/linux/drivers/media/video/cx23885/cx23885.h b/linux/drivers/media/video/cx23885/cx23885.h index 2022ed7de..2a384e6aa 100644 --- a/linux/drivers/media/video/cx23885/cx23885.h +++ b/linux/drivers/media/video/cx23885/cx23885.h @@ -77,6 +77,7 @@ #define CX23885_BOARD_HAUPPAUGE_HVR1255 20 #define CX23885_BOARD_HAUPPAUGE_HVR1210 21 #define CX23885_BOARD_MYGICA_X8506 22 +#define CX23885_BOARD_MAGICPRO_PROHDTVE2 23 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 @@ -289,6 +290,10 @@ struct cx23885_tsport { /* Allow a single tsport to have multiple frontends */ u32 num_frontends; void *port_priv; + + /* FIXME: temporary hack */ + int (*set_frontend_save) (struct dvb_frontend *, + struct dvb_frontend_parameters *); }; struct cx23885_dev { @@ -392,7 +397,7 @@ struct sram_channel { u32 cmds_start; u32 ctrl_start; u32 cdt; - u32 fifo_start;; + u32 fifo_start; u32 fifo_size; u32 ptr1_reg; u32 ptr2_reg; diff --git a/linux/drivers/media/video/cx88/cx88-alsa.c b/linux/drivers/media/video/cx88/cx88-alsa.c index 077c9f0d7..4b9f1bb22 100644 --- a/linux/drivers/media/video/cx88/cx88-alsa.c +++ b/linux/drivers/media/video/cx88/cx88-alsa.c @@ -939,7 +939,7 @@ static struct pci_driver cx88_audio_pci_driver = { .name = "cx88_audio", .id_table = cx88_audio_pci_tbl, .probe = cx88_audio_initdev, - .remove = cx88_audio_finidev, + .remove = __devexit_p(cx88_audio_finidev), }; /**************************************************************************** @@ -949,7 +949,7 @@ static struct pci_driver cx88_audio_pci_driver = { /* * module init */ -static int cx88_audio_init(void) +static int __init cx88_audio_init(void) { printk(KERN_INFO "cx2388x alsa driver version %d.%d.%d loaded\n", (CX88_VERSION_CODE >> 16) & 0xff, @@ -965,9 +965,8 @@ static int cx88_audio_init(void) /* * module remove */ -static void cx88_audio_fini(void) +static void __exit cx88_audio_fini(void) { - pci_unregister_driver(&cx88_audio_pci_driver); } diff --git a/linux/drivers/media/video/cx88/cx88-cards.c b/linux/drivers/media/video/cx88/cx88-cards.c index 825b1f25d..bf0f26c03 100644 --- a/linux/drivers/media/video/cx88/cx88-cards.c +++ b/linux/drivers/media/video/cx88/cx88-cards.c @@ -1557,33 +1557,45 @@ static const struct cx88_board cx88_boards[] = { }, .mpeg = CX88_MPEG_DVB, }, + /* Terry Wu <terrywu2009@gmail.com> */ + /* TV Audio : set GPIO 2, 18, 19 value to 0, 1, 0 */ + /* FM Audio : set GPIO 2, 18, 19 value to 0, 0, 0 */ + /* Line-in Audio : set GPIO 2, 18, 19 value to 0, 1, 1 */ + /* Mute Audio : set GPIO 2 value to 1 */ [CX88_BOARD_WINFAST_TV2000_XP_GLOBAL] = { - .name = "Winfast TV2000 XP Global", + .name = "Leadtek TV2000 XP Global", .tuner_type = TUNER_XC2028, .tuner_addr = 0x61, + .radio_type = TUNER_XC2028, + .radio_addr = 0x61, .input = { { .type = CX88_VMUX_TELEVISION, .vmux = 0, - .gpio0 = 0x0400, /* pin 2:mute = 0 (off?) */ + .gpio0 = 0x0400, /* pin 2 = 0 */ .gpio1 = 0x0000, - .gpio2 = 0x0800, /* pin 19:audio = 0 (tv) */ - + .gpio2 = 0x0C04, /* pin 18 = 1, pin 19 = 0 */ + .gpio3 = 0x0000, }, { .type = CX88_VMUX_COMPOSITE1, .vmux = 1, - .gpio0 = 0x0400, /* probably? or 0x0404 to turn mute on */ + .gpio0 = 0x0400, /* pin 2 = 0 */ .gpio1 = 0x0000, - .gpio2 = 0x0808, /* pin 19:audio = 1 (line) */ - + .gpio2 = 0x0C0C, /* pin 18 = 1, pin 19 = 1 */ + .gpio3 = 0x0000, }, { .type = CX88_VMUX_SVIDEO, .vmux = 2, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x0000, + .gpio2 = 0x0C0C, /* pin 18 = 1, pin 19 = 1 */ + .gpio3 = 0x0000, } }, .radio = { .type = CX88_RADIO, - .gpio0 = 0x004ff, - .gpio1 = 0x010ff, - .gpio2 = 0x0ff, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x0000, + .gpio2 = 0x0C00, /* pin 18 = 0, pin 19 = 0 */ + .gpio3 = 0x0000, }, }, [CX88_BOARD_POWERCOLOR_REAL_ANGEL] = { @@ -2471,6 +2483,41 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = 0x107d, .subdevice = 0x6654, .card = CX88_BOARD_WINFAST_DTV1800H, + }, { + /* PVR2000 PAL Model [107d:6630] */ + .subvendor = 0x107d, + .subdevice = 0x6630, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* PVR2000 PAL Model [107d:6638] */ + .subvendor = 0x107d, + .subdevice = 0x6638, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* PVR2000 NTSC Model [107d:6631] */ + .subvendor = 0x107d, + .subdevice = 0x6631, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* PVR2000 NTSC Model [107d:6637] */ + .subvendor = 0x107d, + .subdevice = 0x6637, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* PVR2000 NTSC Model [107d:663d] */ + .subvendor = 0x107d, + .subdevice = 0x663d, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* DV2000 NTSC Model [107d:6621] */ + .subvendor = 0x107d, + .subdevice = 0x6621, + .card = CX88_BOARD_WINFAST_DV2000, + }, { + /* TV2000 XP Global [107d:6618] */ + .subvendor = 0x107d, + .subdevice = 0x6618, + .card = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL, }, }; @@ -2479,12 +2526,6 @@ static const struct cx88_subid cx88_subids[] = { static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data) { - /* This is just for the "Winfast 2000XP Expert" board ATM; I don't have data on - * any others. - * - * Byte 0 is 1 on the NTSC board. - */ - if (eeprom_data[4] != 0x7d || eeprom_data[5] != 0x10 || eeprom_data[7] != 0x66) { @@ -2492,8 +2533,19 @@ static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data) return; } - core->board.tuner_type = (eeprom_data[6] == 0x13) ? - TUNER_PHILIPS_FM1236_MK3 : TUNER_PHILIPS_FM1216ME_MK3; + /* Terry Wu <terrywu2009@gmail.com> */ + switch (eeprom_data[6]) { + case 0x13: /* SSID 6613 for TV2000 XP Expert NTSC Model */ + case 0x21: /* SSID 6621 for DV2000 NTSC Model */ + case 0x31: /* SSID 6631 for PVR2000 NTSC Model */ + case 0x37: /* SSID 6637 for PVR2000 NTSC Model */ + case 0x3d: /* SSID 6637 for PVR2000 NTSC Model */ + core->board.tuner_type = TUNER_PHILIPS_FM1236_MK3; + break; + default: + core->board.tuner_type = TUNER_PHILIPS_FM1216ME_MK3; + break; + } info_printk(core, "Leadtek Winfast 2000XP Expert config: " "tuner=%d, eeprom[0]=0x%02x\n", @@ -2746,7 +2798,6 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core, { /* Board-specific callbacks */ switch (core->boardnr) { - case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: case CX88_BOARD_POWERCOLOR_REAL_ANGEL: case CX88_BOARD_GENIATECH_X8000_MT: case CX88_BOARD_KWORLD_ATSC_120: @@ -2758,6 +2809,7 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core, case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: return cx88_dvico_xc2028_callback(core, command, arg); + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: case CX88_BOARD_WINFAST_DTV1800H: return cx88_xc3028_winfast1800h_callback(core, command, arg); } @@ -2947,6 +2999,7 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core) udelay(1000); break; + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: case CX88_BOARD_WINFAST_DTV1800H: /* GPIO 12 (xc3028 tuner reset) */ cx_set(MO_GP1_IO, 0x1010); @@ -2983,6 +3036,7 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl) case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: ctl->demod = XC3028_FE_OREN538; break; + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: case CX88_BOARD_PROLINK_PV_8000GT: /* @@ -3026,6 +3080,8 @@ static void cx88_card_setup(struct cx88_core *core) if (0 == core->i2c_rc) gdi_eeprom(core, eeprom); break; + case CX88_BOARD_LEADTEK_PVR2000: + case CX88_BOARD_WINFAST_DV2000: case CX88_BOARD_WINFAST2000XP_EXPERT: if (0 == core->i2c_rc) leadtek_eeprom(core, eeprom); diff --git a/linux/drivers/media/video/cx88/cx88-video.c b/linux/drivers/media/video/cx88/cx88-video.c index 70b086fb7..a55053767 100644 --- a/linux/drivers/media/video/cx88/cx88-video.c +++ b/linux/drivers/media/video/cx88/cx88-video.c @@ -1095,6 +1095,7 @@ video_poll(struct file *file, struct poll_table_struct *wait) { struct cx8800_fh *fh = file->private_data; struct cx88_buffer *buf; + unsigned int rc = POLLERR; if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) { if (!res_get(fh->dev,fh,RESOURCE_VBI)) @@ -1102,22 +1103,27 @@ video_poll(struct file *file, struct poll_table_struct *wait) return videobuf_poll_stream(file, &fh->vbiq, wait); } + mutex_lock(&fh->vidq.vb_lock); if (res_check(fh,RESOURCE_VIDEO)) { /* streaming capture */ if (list_empty(&fh->vidq.stream)) - return POLLERR; + goto done; buf = list_entry(fh->vidq.stream.next,struct cx88_buffer,vb.stream); } else { /* read() capture */ buf = (struct cx88_buffer*)fh->vidq.read_buf; if (NULL == buf) - return POLLERR; + goto done; } poll_wait(file, &buf->vb.done, wait); if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR) - return POLLIN|POLLRDNORM; - return 0; + rc = POLLIN|POLLRDNORM; + else + rc = 0; +done: + mutex_unlock(&fh->vidq.vb_lock); + return rc; } static int video_release(struct file *file) diff --git a/linux/drivers/media/video/davinci/Makefile b/linux/drivers/media/video/davinci/Makefile new file mode 100644 index 000000000..f44cad2f5 --- /dev/null +++ b/linux/drivers/media/video/davinci/Makefile @@ -0,0 +1,15 @@ +# +# Makefile for the davinci video device drivers. +# + +# VPIF +obj-$(CONFIG_VIDEO_DAVINCI_VPIF) += vpif.o + +#DM646x EVM Display driver +obj-$(CONFIG_DISPLAY_DAVINCI_DM646X_EVM) += vpif_display.o + +# Capture: DM6446 and DM355 +obj-$(CONFIG_VIDEO_VPSS_SYSTEM) += vpss.o +obj-$(CONFIG_VIDEO_VPFE_CAPTURE) += vpfe_capture.o +obj-$(CONFIG_VIDEO_DM6446_CCDC) += dm644x_ccdc.o +obj-$(CONFIG_VIDEO_DM355_CCDC) += dm355_ccdc.o diff --git a/linux/drivers/media/video/davinci/ccdc_hw_device.h b/linux/drivers/media/video/davinci/ccdc_hw_device.h new file mode 100644 index 000000000..86b9b3518 --- /dev/null +++ b/linux/drivers/media/video/davinci/ccdc_hw_device.h @@ -0,0 +1,110 @@ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ccdc device API + */ +#ifndef _CCDC_HW_DEVICE_H +#define _CCDC_HW_DEVICE_H + +#ifdef __KERNEL__ +#include <linux/videodev2.h> +#include <linux/device.h> +#include <media/davinci/vpfe_types.h> +#include <media/davinci/ccdc_types.h> + +/* + * ccdc hw operations + */ +struct ccdc_hw_ops { + /* Pointer to initialize function to initialize ccdc device */ + int (*open) (struct device *dev); + /* Pointer to deinitialize function */ + int (*close) (struct device *dev); + /* set ccdc base address */ + void (*set_ccdc_base)(void *base, int size); + /* Pointer to function to enable or disable ccdc */ + void (*enable) (int en); + /* reset sbl. only for 6446 */ + void (*reset) (void); + /* enable output to sdram */ + void (*enable_out_to_sdram) (int en); + /* Pointer to function to set hw parameters */ + int (*set_hw_if_params) (struct vpfe_hw_if_param *param); + /* get interface parameters */ + int (*get_hw_if_params) (struct vpfe_hw_if_param *param); + /* + * Pointer to function to set parameters. Used + * for implementing VPFE_S_CCDC_PARAMS + */ + int (*set_params) (void *params); + /* + * Pointer to function to get parameter. Used + * for implementing VPFE_G_CCDC_PARAMS + */ + int (*get_params) (void *params); + /* Pointer to function to configure ccdc */ + int (*configure) (void); + + /* Pointer to function to set buffer type */ + int (*set_buftype) (enum ccdc_buftype buf_type); + /* Pointer to function to get buffer type */ + enum ccdc_buftype (*get_buftype) (void); + /* Pointer to function to set frame format */ + int (*set_frame_format) (enum ccdc_frmfmt frm_fmt); + /* Pointer to function to get frame format */ + enum ccdc_frmfmt (*get_frame_format) (void); + /* enumerate hw pix formats */ + int (*enum_pix)(u32 *hw_pix, int i); + /* Pointer to function to set buffer type */ + u32 (*get_pixel_format) (void); + /* Pointer to function to get pixel format. */ + int (*set_pixel_format) (u32 pixfmt); + /* Pointer to function to set image window */ + int (*set_image_window) (struct v4l2_rect *win); + /* Pointer to function to set image window */ + void (*get_image_window) (struct v4l2_rect *win); + /* Pointer to function to get line length */ + unsigned int (*get_line_length) (void); + + /* Query CCDC control IDs */ + int (*queryctrl)(struct v4l2_queryctrl *qctrl); + /* Set CCDC control */ + int (*set_control)(struct v4l2_control *ctrl); + /* Get CCDC control */ + int (*get_control)(struct v4l2_control *ctrl); + + /* Pointer to function to set frame buffer address */ + void (*setfbaddr) (unsigned long addr); + /* Pointer to function to get field id */ + int (*getfid) (void); +}; + +struct ccdc_hw_device { + /* ccdc device name */ + char name[32]; + /* module owner */ + struct module *owner; + /* hw ops */ + struct ccdc_hw_ops hw_ops; +}; + +/* Used by CCDC module to register & unregister with vpfe capture driver */ +int vpfe_register_ccdc_device(struct ccdc_hw_device *dev); +void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev); + +#endif +#endif diff --git a/linux/drivers/media/video/davinci/dm355_ccdc.c b/linux/drivers/media/video/davinci/dm355_ccdc.c new file mode 100644 index 000000000..4629cabe3 --- /dev/null +++ b/linux/drivers/media/video/davinci/dm355_ccdc.c @@ -0,0 +1,978 @@ +/* + * Copyright (C) 2005-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * CCDC hardware module for DM355 + * ------------------------------ + * + * This module is for configuring DM355 CCD controller of VPFE to capture + * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules + * such as Defect Pixel Correction, Color Space Conversion etc to + * pre-process the Bayer RGB data, before writing it to SDRAM. This + * module also allows application to configure individual + * module parameters through VPFE_CMD_S_CCDC_RAW_PARAMS IOCTL. + * To do so, application include dm355_ccdc.h and vpfe_capture.h header + * files. The setparams() API is called by vpfe_capture driver + * to configure module parameters + * + * TODO: 1) Raw bayer parameter settings and bayer capture + * 2) Split module parameter structure to module specific ioctl structs + * 3) add support for lense shading correction + * 4) investigate if enum used for user space type definition + * to be replaced by #defines or integer + */ +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/videodev2.h> +#include <media/davinci/dm355_ccdc.h> +#include <media/davinci/vpss.h> +#include "dm355_ccdc_regs.h" +#include "ccdc_hw_device.h" + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("CCDC Driver for DM355"); +MODULE_AUTHOR("Texas Instruments"); + +static struct device *dev; + +/* Object for CCDC raw mode */ +static struct ccdc_params_raw ccdc_hw_params_raw = { + .pix_fmt = CCDC_PIXFMT_RAW, + .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, + .win = CCDC_WIN_VGA, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .gain = { + .r_ye = 256, + .gb_g = 256, + .gr_cy = 256, + .b_mg = 256 + }, + .config_params = { + .datasft = 2, + .data_sz = CCDC_DATA_10BITS, + .mfilt1 = CCDC_NO_MEDIAN_FILTER1, + .mfilt2 = CCDC_NO_MEDIAN_FILTER2, + .alaw = { + .gama_wd = 2, + }, + .blk_clamp = { + .sample_pixel = 1, + .dc_sub = 25 + }, + .col_pat_field0 = { + .olop = CCDC_GREEN_BLUE, + .olep = CCDC_BLUE, + .elop = CCDC_RED, + .elep = CCDC_GREEN_RED + }, + .col_pat_field1 = { + .olop = CCDC_GREEN_BLUE, + .olep = CCDC_BLUE, + .elop = CCDC_RED, + .elep = CCDC_GREEN_RED + }, + }, +}; + + +/* Object for CCDC ycbcr mode */ +static struct ccdc_params_ycbcr ccdc_hw_params_ycbcr = { + .win = CCDC_WIN_PAL, + .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, + .frm_fmt = CCDC_FRMFMT_INTERLACED, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .bt656_enable = 1, + .pix_order = CCDC_PIXORDER_CBYCRY, + .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED +}; + +static enum vpfe_hw_if_type ccdc_if_type; +static void *__iomem ccdc_base_addr; +static int ccdc_addr_size; + +/* Raw Bayer formats */ +static u32 ccdc_raw_bayer_pix_formats[] = + {V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; + +/* Raw YUV formats */ +static u32 ccdc_raw_yuv_pix_formats[] = + {V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; + +/* register access routines */ +static inline u32 regr(u32 offset) +{ + return __raw_readl(ccdc_base_addr + offset); +} + +static inline void regw(u32 val, u32 offset) +{ + __raw_writel(val, ccdc_base_addr + offset); +} + +static void ccdc_set_ccdc_base(void *addr, int size) +{ + ccdc_base_addr = addr; + ccdc_addr_size = size; +} + +static void ccdc_enable(int en) +{ + unsigned int temp; + temp = regr(SYNCEN); + temp &= (~CCDC_SYNCEN_VDHDEN_MASK); + temp |= (en & CCDC_SYNCEN_VDHDEN_MASK); + regw(temp, SYNCEN); +} + +static void ccdc_enable_output_to_sdram(int en) +{ + unsigned int temp; + temp = regr(SYNCEN); + temp &= (~(CCDC_SYNCEN_WEN_MASK)); + temp |= ((en << CCDC_SYNCEN_WEN_SHIFT) & CCDC_SYNCEN_WEN_MASK); + regw(temp, SYNCEN); +} + +static void ccdc_config_gain_offset(void) +{ + /* configure gain */ + regw(ccdc_hw_params_raw.gain.r_ye, RYEGAIN); + regw(ccdc_hw_params_raw.gain.gr_cy, GRCYGAIN); + regw(ccdc_hw_params_raw.gain.gb_g, GBGGAIN); + regw(ccdc_hw_params_raw.gain.b_mg, BMGGAIN); + /* configure offset */ + regw(ccdc_hw_params_raw.ccdc_offset, OFFSET); +} + +/* + * ccdc_restore_defaults() + * This function restore power on defaults in the ccdc registers + */ +static int ccdc_restore_defaults(void) +{ + int i; + + dev_dbg(dev, "\nstarting ccdc_restore_defaults..."); + /* set all registers to zero */ + for (i = 0; i <= CCDC_REG_LAST; i += 4) + regw(0, i); + + /* now override the values with power on defaults in registers */ + regw(MODESET_DEFAULT, MODESET); + /* no culling support */ + regw(CULH_DEFAULT, CULH); + regw(CULV_DEFAULT, CULV); + /* Set default Gain and Offset */ + ccdc_hw_params_raw.gain.r_ye = GAIN_DEFAULT; + ccdc_hw_params_raw.gain.gb_g = GAIN_DEFAULT; + ccdc_hw_params_raw.gain.gr_cy = GAIN_DEFAULT; + ccdc_hw_params_raw.gain.b_mg = GAIN_DEFAULT; + ccdc_config_gain_offset(); + regw(OUTCLIP_DEFAULT, OUTCLIP); + regw(LSCCFG2_DEFAULT, LSCCFG2); + /* select ccdc input */ + if (vpss_select_ccdc_source(VPSS_CCDCIN)) { + dev_dbg(dev, "\ncouldn't select ccdc input source"); + return -EFAULT; + } + /* select ccdc clock */ + if (vpss_enable_clock(VPSS_CCDC_CLOCK, 1) < 0) { + dev_dbg(dev, "\ncouldn't enable ccdc clock"); + return -EFAULT; + } + dev_dbg(dev, "\nEnd of ccdc_restore_defaults..."); + return 0; +} + +static int ccdc_open(struct device *device) +{ + dev = device; + return ccdc_restore_defaults(); +} + +static int ccdc_close(struct device *device) +{ + /* disable clock */ + vpss_enable_clock(VPSS_CCDC_CLOCK, 0); + /* do nothing for now */ + return 0; +} +/* + * ccdc_setwin() + * This function will configure the window size to + * be capture in CCDC reg. + */ +static void ccdc_setwin(struct v4l2_rect *image_win, + enum ccdc_frmfmt frm_fmt, int ppc) +{ + int horz_start, horz_nr_pixels; + int vert_start, vert_nr_lines; + int mid_img = 0; + + dev_dbg(dev, "\nStarting ccdc_setwin..."); + + /* + * ppc - per pixel count. indicates how many pixels per cell + * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. + * raw capture this is 1 + */ + horz_start = image_win->left << (ppc - 1); + horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1; + + /* Writing the horizontal info into the registers */ + regw(horz_start, SPH); + regw(horz_nr_pixels, NPH); + vert_start = image_win->top; + + if (frm_fmt == CCDC_FRMFMT_INTERLACED) { + vert_nr_lines = (image_win->height >> 1) - 1; + vert_start >>= 1; + /* Since first line doesn't have any data */ + vert_start += 1; + /* configure VDINT0 and VDINT1 */ + regw(vert_start, VDINT0); + } else { + /* Since first line doesn't have any data */ + vert_start += 1; + vert_nr_lines = image_win->height - 1; + /* configure VDINT0 and VDINT1 */ + mid_img = vert_start + (image_win->height / 2); + regw(vert_start, VDINT0); + regw(mid_img, VDINT1); + } + regw(vert_start & CCDC_START_VER_ONE_MASK, SLV0); + regw(vert_start & CCDC_START_VER_TWO_MASK, SLV1); + regw(vert_nr_lines & CCDC_NUM_LINES_VER, NLV); + dev_dbg(dev, "\nEnd of ccdc_setwin..."); +} + +static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam) +{ + if (ccdcparam->datasft < CCDC_DATA_NO_SHIFT || + ccdcparam->datasft > CCDC_DATA_SHIFT_6BIT) { + dev_dbg(dev, "Invalid value of data shift\n"); + return -EINVAL; + } + + if (ccdcparam->mfilt1 < CCDC_NO_MEDIAN_FILTER1 || + ccdcparam->mfilt1 > CCDC_MEDIAN_FILTER1) { + dev_dbg(dev, "Invalid value of median filter1\n"); + return -EINVAL; + } + + if (ccdcparam->mfilt2 < CCDC_NO_MEDIAN_FILTER2 || + ccdcparam->mfilt2 > CCDC_MEDIAN_FILTER2) { + dev_dbg(dev, "Invalid value of median filter2\n"); + return -EINVAL; + } + + if ((ccdcparam->med_filt_thres < 0) || + (ccdcparam->med_filt_thres > CCDC_MED_FILT_THRESH)) { + dev_dbg(dev, "Invalid value of median filter thresold\n"); + return -EINVAL; + } + + if (ccdcparam->data_sz < CCDC_DATA_16BITS || + ccdcparam->data_sz > CCDC_DATA_8BITS) { + dev_dbg(dev, "Invalid value of data size\n"); + return -EINVAL; + } + + if (ccdcparam->alaw.enable) { + if (ccdcparam->alaw.gama_wd < CCDC_GAMMA_BITS_13_4 || + ccdcparam->alaw.gama_wd > CCDC_GAMMA_BITS_09_0) { + dev_dbg(dev, "Invalid value of ALAW\n"); + return -EINVAL; + } + } + + if (ccdcparam->blk_clamp.b_clamp_enable) { + if (ccdcparam->blk_clamp.sample_pixel < CCDC_SAMPLE_1PIXELS || + ccdcparam->blk_clamp.sample_pixel > CCDC_SAMPLE_16PIXELS) { + dev_dbg(dev, "Invalid value of sample pixel\n"); + return -EINVAL; + } + if (ccdcparam->blk_clamp.sample_ln < CCDC_SAMPLE_1LINES || + ccdcparam->blk_clamp.sample_ln > CCDC_SAMPLE_16LINES) { + dev_dbg(dev, "Invalid value of sample lines\n"); + return -EINVAL; + } + } + return 0; +} + +/* Parameter operations */ +static int ccdc_set_params(void __user *params) +{ + struct ccdc_config_params_raw ccdc_raw_params; + int x; + + /* only raw module parameters can be set through the IOCTL */ + if (ccdc_if_type != VPFE_RAW_BAYER) + return -EINVAL; + + x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params)); + if (x) { + dev_dbg(dev, "ccdc_set_params: error in copying ccdc" + "params, %d\n", x); + return -EFAULT; + } + + if (!validate_ccdc_param(&ccdc_raw_params)) { + memcpy(&ccdc_hw_params_raw.config_params, + &ccdc_raw_params, + sizeof(ccdc_raw_params)); + return 0; + } + return -EINVAL; +} + +/* This function will configure CCDC for YCbCr video capture */ +static void ccdc_config_ycbcr(void) +{ + struct ccdc_params_ycbcr *params = &ccdc_hw_params_ycbcr; + u32 temp; + + /* first set the CCDC power on defaults values in all registers */ + dev_dbg(dev, "\nStarting ccdc_config_ycbcr..."); + ccdc_restore_defaults(); + + /* configure pixel format & video frame format */ + temp = (((params->pix_fmt & CCDC_INPUT_MODE_MASK) << + CCDC_INPUT_MODE_SHIFT) | + ((params->frm_fmt & CCDC_FRM_FMT_MASK) << + CCDC_FRM_FMT_SHIFT)); + + /* setup BT.656 sync mode */ + if (params->bt656_enable) { + regw(CCDC_REC656IF_BT656_EN, REC656IF); + /* + * configure the FID, VD, HD pin polarity fld,hd pol positive, + * vd negative, 8-bit pack mode + */ + temp |= CCDC_VD_POL_NEGATIVE; + } else { /* y/c external sync mode */ + temp |= (((params->fid_pol & CCDC_FID_POL_MASK) << + CCDC_FID_POL_SHIFT) | + ((params->hd_pol & CCDC_HD_POL_MASK) << + CCDC_HD_POL_SHIFT) | + ((params->vd_pol & CCDC_VD_POL_MASK) << + CCDC_VD_POL_SHIFT)); + } + + /* pack the data to 8-bit */ + temp |= CCDC_DATA_PACK_ENABLE; + + regw(temp, MODESET); + + /* configure video window */ + ccdc_setwin(¶ms->win, params->frm_fmt, 2); + + /* configure the order of y cb cr in SD-RAM */ + temp = (params->pix_order << CCDC_Y8POS_SHIFT); + temp |= CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC; + regw(temp, CCDCFG); + + /* + * configure the horizontal line offset. This is done by rounding up + * width to a multiple of 16 pixels and multiply by two to account for + * y:cb:cr 4:2:2 data + */ + regw(((params->win.width * 2 + 31) >> 5), HSIZE); + + /* configure the memory line offset */ + if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) { + /* two fields are interleaved in memory */ + regw(CCDC_SDOFST_FIELD_INTERLEAVED, SDOFST); + } + + dev_dbg(dev, "\nEnd of ccdc_config_ycbcr...\n"); +} + +/* + * ccdc_config_black_clamp() + * configure parameters for Optical Black Clamp + */ +static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp) +{ + u32 val; + + if (!bclamp->b_clamp_enable) { + /* configure DCSub */ + regw(bclamp->dc_sub & CCDC_BLK_DC_SUB_MASK, DCSUB); + regw(0x0000, CLAMP); + return; + } + /* Enable the Black clamping, set sample lines and pixels */ + val = (bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) | + ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) << + CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE; + regw(val, CLAMP); + + /* If Black clamping is enable then make dcsub 0 */ + val = (bclamp->sample_ln & CCDC_NUM_LINE_CALC_MASK) + << CCDC_NUM_LINE_CALC_SHIFT; + regw(val, DCSUB); +} + +/* + * ccdc_config_black_compense() + * configure parameters for Black Compensation + */ +static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp) +{ + u32 val; + + val = (bcomp->b & CCDC_BLK_COMP_MASK) | + ((bcomp->gb & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_GB_COMP_SHIFT); + regw(val, BLKCMP1); + + val = ((bcomp->gr & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_GR_COMP_SHIFT) | + ((bcomp->r & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_R_COMP_SHIFT); + regw(val, BLKCMP0); +} + +/* + * ccdc_write_dfc_entry() + * write an entry in the dfc table. + */ +int ccdc_write_dfc_entry(int index, struct ccdc_vertical_dft *dfc) +{ +/* TODO This is to be re-visited and adjusted */ +#define DFC_WRITE_WAIT_COUNT 1000 + u32 val, count = DFC_WRITE_WAIT_COUNT; + + regw(dfc->dft_corr_vert[index], DFCMEM0); + regw(dfc->dft_corr_horz[index], DFCMEM1); + regw(dfc->dft_corr_sub1[index], DFCMEM2); + regw(dfc->dft_corr_sub2[index], DFCMEM3); + regw(dfc->dft_corr_sub3[index], DFCMEM4); + /* set WR bit to write */ + val = regr(DFCMEMCTL) | CCDC_DFCMEMCTL_DFCMWR_MASK; + regw(val, DFCMEMCTL); + + /* + * Assume, it is very short. If we get an error, we need to + * adjust this value + */ + while (regr(DFCMEMCTL) & CCDC_DFCMEMCTL_DFCMWR_MASK) + count--; + /* + * TODO We expect the count to be non-zero to be successful. Adjust + * the count if write requires more time + */ + + if (count) { + dev_err(dev, "defect table write timeout !!!\n"); + return -1; + } + return 0; +} + +/* + * ccdc_config_vdfc() + * configure parameters for Vertical Defect Correction + */ +static int ccdc_config_vdfc(struct ccdc_vertical_dft *dfc) +{ + u32 val; + int i; + + /* Configure General Defect Correction. The table used is from IPIPE */ + val = dfc->gen_dft_en & CCDC_DFCCTL_GDFCEN_MASK; + + /* Configure Vertical Defect Correction if needed */ + if (!dfc->ver_dft_en) { + /* Enable only General Defect Correction */ + regw(val, DFCCTL); + return 0; + } + + if (dfc->table_size > CCDC_DFT_TABLE_SIZE) + return -EINVAL; + + val |= CCDC_DFCCTL_VDFC_DISABLE; + val |= (dfc->dft_corr_ctl.vdfcsl & CCDC_DFCCTL_VDFCSL_MASK) << + CCDC_DFCCTL_VDFCSL_SHIFT; + val |= (dfc->dft_corr_ctl.vdfcuda & CCDC_DFCCTL_VDFCUDA_MASK) << + CCDC_DFCCTL_VDFCUDA_SHIFT; + val |= (dfc->dft_corr_ctl.vdflsft & CCDC_DFCCTL_VDFLSFT_MASK) << + CCDC_DFCCTL_VDFLSFT_SHIFT; + regw(val , DFCCTL); + + /* clear address ptr to offset 0 */ + val = CCDC_DFCMEMCTL_DFCMARST_MASK << CCDC_DFCMEMCTL_DFCMARST_SHIFT; + + /* write defect table entries */ + for (i = 0; i < dfc->table_size; i++) { + /* increment address for non zero index */ + if (i != 0) + val = CCDC_DFCMEMCTL_INC_ADDR; + regw(val, DFCMEMCTL); + if (ccdc_write_dfc_entry(i, dfc) < 0) + return -EFAULT; + } + + /* update saturation level and enable dfc */ + regw(dfc->saturation_ctl & CCDC_VDC_DFCVSAT_MASK, DFCVSAT); + val = regr(DFCCTL) | (CCDC_DFCCTL_VDFCEN_MASK << + CCDC_DFCCTL_VDFCEN_SHIFT); + regw(val, DFCCTL); + return 0; +} + +/* + * ccdc_config_csc() + * configure parameters for color space conversion + * Each register CSCM0-7 has two values in S8Q5 format. + */ +static void ccdc_config_csc(struct ccdc_csc *csc) +{ + u32 val1, val2; + int i; + + if (!csc->enable) + return; + + /* Enable the CSC sub-module */ + regw(CCDC_CSC_ENABLE, CSCCTL); + + /* Converting the co-eff as per the format of the register */ + for (i = 0; i < CCDC_CSC_COEFF_TABLE_SIZE; i++) { + if ((i % 2) == 0) { + /* CSCM - LSB */ + val1 = (csc->coeff[i].integer & + CCDC_CSC_COEF_INTEG_MASK) + << CCDC_CSC_COEF_INTEG_SHIFT; + /* + * convert decimal part to binary. Use 2 decimal + * precision, user values range from .00 - 0.99 + */ + val1 |= (((csc->coeff[i].decimal & + CCDC_CSC_COEF_DECIMAL_MASK) * + CCDC_CSC_DEC_MAX) / 100); + } else { + + /* CSCM - MSB */ + val2 = (csc->coeff[i].integer & + CCDC_CSC_COEF_INTEG_MASK) + << CCDC_CSC_COEF_INTEG_SHIFT; + val2 |= (((csc->coeff[i].decimal & + CCDC_CSC_COEF_DECIMAL_MASK) * + CCDC_CSC_DEC_MAX) / 100); + val2 <<= CCDC_CSCM_MSB_SHIFT; + val2 |= val1; + regw(val2, (CSCM0 + ((i - 1) << 1))); + } + } +} + +/* + * ccdc_config_color_patterns() + * configure parameters for color patterns + */ +static void ccdc_config_color_patterns(struct ccdc_col_pat *pat0, + struct ccdc_col_pat *pat1) +{ + u32 val; + + val = (pat0->olop | (pat0->olep << 2) | (pat0->elop << 4) | + (pat0->elep << 6) | (pat1->olop << 8) | (pat1->olep << 10) | + (pat1->elop << 12) | (pat1->elep << 14)); + regw(val, COLPTN); +} + +/* This function will configure CCDC for Raw mode image capture */ +static int ccdc_config_raw(void) +{ + struct ccdc_params_raw *params = &ccdc_hw_params_raw; + struct ccdc_config_params_raw *config_params = + &ccdc_hw_params_raw.config_params; + unsigned int val; + + dev_dbg(dev, "\nStarting ccdc_config_raw..."); + + /* restore power on defaults to register */ + ccdc_restore_defaults(); + + /* CCDCFG register: + * set CCD Not to swap input since input is RAW data + * set FID detection function to Latch at V-Sync + * set WENLOG - ccdc valid area to AND + * set TRGSEL to WENBIT + * set EXTRG to DISABLE + * disable latching function on VSYNC - shadowed registers + */ + regw(CCDC_YCINSWP_RAW | CCDC_CCDCFG_FIDMD_LATCH_VSYNC | + CCDC_CCDCFG_WENLOG_AND | CCDC_CCDCFG_TRGSEL_WEN | + CCDC_CCDCFG_EXTRG_DISABLE | CCDC_LATCH_ON_VSYNC_DISABLE, CCDCFG); + + /* + * Set VDHD direction to input, input type to raw input + * normal data polarity, do not use external WEN + */ + val = (CCDC_VDHDOUT_INPUT | CCDC_RAW_IP_MODE | CCDC_DATAPOL_NORMAL | + CCDC_EXWEN_DISABLE); + + /* + * Configure the vertical sync polarity (MODESET.VDPOL), horizontal + * sync polarity (MODESET.HDPOL), field id polarity (MODESET.FLDPOL), + * frame format(progressive or interlace), & pixel format (Input mode) + */ + val |= (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) | + ((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) | + ((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) | + ((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) | + ((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT)); + + /* set pack for alaw compression */ + if ((config_params->data_sz == CCDC_DATA_8BITS) || + config_params->alaw.enable) + val |= CCDC_DATA_PACK_ENABLE; + + /* Configure for LPF */ + if (config_params->lpf_enable) + val |= (config_params->lpf_enable & CCDC_LPF_MASK) << + CCDC_LPF_SHIFT; + + /* Configure the data shift */ + val |= (config_params->datasft & CCDC_DATASFT_MASK) << + CCDC_DATASFT_SHIFT; + regw(val , MODESET); + dev_dbg(dev, "\nWriting 0x%x to MODESET...\n", val); + + /* Configure the Median Filter threshold */ + regw((config_params->med_filt_thres) & CCDC_MED_FILT_THRESH, MEDFILT); + + /* Configure GAMMAWD register. defaur 11-2, and Mosaic cfa pattern */ + val = CCDC_GAMMA_BITS_11_2 << CCDC_GAMMAWD_INPUT_SHIFT | + CCDC_CFA_MOSAIC; + + /* Enable and configure aLaw register if needed */ + if (config_params->alaw.enable) { + val |= (CCDC_ALAW_ENABLE | + ((config_params->alaw.gama_wd & + CCDC_ALAW_GAMA_WD_MASK) << + CCDC_GAMMAWD_INPUT_SHIFT)); + } + + /* Configure Median filter1 & filter2 */ + val |= ((config_params->mfilt1 << CCDC_MFILT1_SHIFT) | + (config_params->mfilt2 << CCDC_MFILT2_SHIFT)); + + regw(val, GAMMAWD); + dev_dbg(dev, "\nWriting 0x%x to GAMMAWD...\n", val); + + /* configure video window */ + ccdc_setwin(¶ms->win, params->frm_fmt, 1); + + /* Optical Clamp Averaging */ + ccdc_config_black_clamp(&config_params->blk_clamp); + + /* Black level compensation */ + ccdc_config_black_compense(&config_params->blk_comp); + + /* Vertical Defect Correction if needed */ + if (ccdc_config_vdfc(&config_params->vertical_dft) < 0) + return -EFAULT; + + /* color space conversion */ + ccdc_config_csc(&config_params->csc); + + /* color pattern */ + ccdc_config_color_patterns(&config_params->col_pat_field0, + &config_params->col_pat_field1); + + /* Configure the Gain & offset control */ + ccdc_config_gain_offset(); + + dev_dbg(dev, "\nWriting %x to COLPTN...\n", val); + + /* Configure DATAOFST register */ + val = (config_params->data_offset.horz_offset & CCDC_DATAOFST_MASK) << + CCDC_DATAOFST_H_SHIFT; + val |= (config_params->data_offset.vert_offset & CCDC_DATAOFST_MASK) << + CCDC_DATAOFST_V_SHIFT; + regw(val, DATAOFST); + + /* configuring HSIZE register */ + val = (params->horz_flip_enable & CCDC_HSIZE_FLIP_MASK) << + CCDC_HSIZE_FLIP_SHIFT; + + /* If pack 8 is enable then 1 pixel will take 1 byte */ + if ((config_params->data_sz == CCDC_DATA_8BITS) || + config_params->alaw.enable) { + val |= (((params->win.width) + 31) >> 5) & + CCDC_HSIZE_VAL_MASK; + + /* adjust to multiple of 32 */ + dev_dbg(dev, "\nWriting 0x%x to HSIZE...\n", + (((params->win.width) + 31) >> 5) & + CCDC_HSIZE_VAL_MASK); + } else { + /* else one pixel will take 2 byte */ + val |= (((params->win.width * 2) + 31) >> 5) & + CCDC_HSIZE_VAL_MASK; + + dev_dbg(dev, "\nWriting 0x%x to HSIZE...\n", + (((params->win.width * 2) + 31) >> 5) & + CCDC_HSIZE_VAL_MASK); + } + regw(val, HSIZE); + + /* Configure SDOFST register */ + if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { + if (params->image_invert_enable) { + /* For interlace inverse mode */ + regw(CCDC_SDOFST_INTERLACE_INVERSE, SDOFST); + dev_dbg(dev, "\nWriting %x to SDOFST...\n", + CCDC_SDOFST_INTERLACE_INVERSE); + } else { + /* For interlace non inverse mode */ + regw(CCDC_SDOFST_INTERLACE_NORMAL, SDOFST); + dev_dbg(dev, "\nWriting %x to SDOFST...\n", + CCDC_SDOFST_INTERLACE_NORMAL); + } + } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { + if (params->image_invert_enable) { + /* For progessive inverse mode */ + regw(CCDC_SDOFST_PROGRESSIVE_INVERSE, SDOFST); + dev_dbg(dev, "\nWriting %x to SDOFST...\n", + CCDC_SDOFST_PROGRESSIVE_INVERSE); + } else { + /* For progessive non inverse mode */ + regw(CCDC_SDOFST_PROGRESSIVE_NORMAL, SDOFST); + dev_dbg(dev, "\nWriting %x to SDOFST...\n", + CCDC_SDOFST_PROGRESSIVE_NORMAL); + } + } + dev_dbg(dev, "\nend of ccdc_config_raw..."); + return 0; +} + +static int ccdc_configure(void) +{ + if (ccdc_if_type == VPFE_RAW_BAYER) + return ccdc_config_raw(); + else + ccdc_config_ycbcr(); + return 0; +} + +static int ccdc_set_buftype(enum ccdc_buftype buf_type) +{ + if (ccdc_if_type == VPFE_RAW_BAYER) + ccdc_hw_params_raw.buf_type = buf_type; + else + ccdc_hw_params_ycbcr.buf_type = buf_type; + return 0; +} +static enum ccdc_buftype ccdc_get_buftype(void) +{ + if (ccdc_if_type == VPFE_RAW_BAYER) + return ccdc_hw_params_raw.buf_type; + return ccdc_hw_params_ycbcr.buf_type; +} + +static int ccdc_enum_pix(u32 *pix, int i) +{ + int ret = -EINVAL; + if (ccdc_if_type == VPFE_RAW_BAYER) { + if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) { + *pix = ccdc_raw_bayer_pix_formats[i]; + ret = 0; + } + } else { + if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) { + *pix = ccdc_raw_yuv_pix_formats[i]; + ret = 0; + } + } + return ret; +} + +static int ccdc_set_pixel_format(u32 pixfmt) +{ + struct ccdc_a_law *alaw = + &ccdc_hw_params_raw.config_params.alaw; + + if (ccdc_if_type == VPFE_RAW_BAYER) { + ccdc_hw_params_raw.pix_fmt = CCDC_PIXFMT_RAW; + if (pixfmt == V4L2_PIX_FMT_SBGGR8) + alaw->enable = 1; + else if (pixfmt != V4L2_PIX_FMT_SBGGR16) + return -EINVAL; + } else { + if (pixfmt == V4L2_PIX_FMT_YUYV) + ccdc_hw_params_ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; + else if (pixfmt == V4L2_PIX_FMT_UYVY) + ccdc_hw_params_ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + else + return -EINVAL; + } + return 0; +} +static u32 ccdc_get_pixel_format(void) +{ + struct ccdc_a_law *alaw = + &ccdc_hw_params_raw.config_params.alaw; + u32 pixfmt; + + if (ccdc_if_type == VPFE_RAW_BAYER) + if (alaw->enable) + pixfmt = V4L2_PIX_FMT_SBGGR8; + else + pixfmt = V4L2_PIX_FMT_SBGGR16; + else { + if (ccdc_hw_params_ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) + pixfmt = V4L2_PIX_FMT_YUYV; + else + pixfmt = V4L2_PIX_FMT_UYVY; + } + return pixfmt; +} +static int ccdc_set_image_window(struct v4l2_rect *win) +{ + if (ccdc_if_type == VPFE_RAW_BAYER) + ccdc_hw_params_raw.win = *win; + else + ccdc_hw_params_ycbcr.win = *win; + return 0; +} + +static void ccdc_get_image_window(struct v4l2_rect *win) +{ + if (ccdc_if_type == VPFE_RAW_BAYER) + *win = ccdc_hw_params_raw.win; + else + *win = ccdc_hw_params_ycbcr.win; +} + +static unsigned int ccdc_get_line_length(void) +{ + struct ccdc_config_params_raw *config_params = + &ccdc_hw_params_raw.config_params; + unsigned int len; + + if (ccdc_if_type == VPFE_RAW_BAYER) { + if ((config_params->alaw.enable) || + (config_params->data_sz == CCDC_DATA_8BITS)) + len = ccdc_hw_params_raw.win.width; + else + len = ccdc_hw_params_raw.win.width * 2; + } else + len = ccdc_hw_params_ycbcr.win.width * 2; + return ALIGN(len, 32); +} + +static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt) +{ + if (ccdc_if_type == VPFE_RAW_BAYER) + ccdc_hw_params_raw.frm_fmt = frm_fmt; + else + ccdc_hw_params_ycbcr.frm_fmt = frm_fmt; + return 0; +} + +static enum ccdc_frmfmt ccdc_get_frame_format(void) +{ + if (ccdc_if_type == VPFE_RAW_BAYER) + return ccdc_hw_params_raw.frm_fmt; + else + return ccdc_hw_params_ycbcr.frm_fmt; +} + +static int ccdc_getfid(void) +{ + return (regr(MODESET) >> 15) & 1; +} + +/* misc operations */ +static inline void ccdc_setfbaddr(unsigned long addr) +{ + regw((addr >> 21) & 0x007f, STADRH); + regw((addr >> 5) & 0x0ffff, STADRL); +} + +static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params) +{ + ccdc_if_type = params->if_type; + + switch (params->if_type) { + case VPFE_BT656: + case VPFE_YCBCR_SYNC_16: + case VPFE_YCBCR_SYNC_8: + ccdc_hw_params_ycbcr.vd_pol = params->vdpol; + ccdc_hw_params_ycbcr.hd_pol = params->hdpol; + break; + default: + /* TODO add support for raw bayer here */ + return -EINVAL; + } + return 0; +} + +static struct ccdc_hw_device ccdc_hw_dev = { + .name = "DM355 CCDC", + .owner = THIS_MODULE, + .hw_ops = { + .open = ccdc_open, + .close = ccdc_close, + .set_ccdc_base = ccdc_set_ccdc_base, + .enable = ccdc_enable, + .enable_out_to_sdram = ccdc_enable_output_to_sdram, + .set_hw_if_params = ccdc_set_hw_if_params, + .set_params = ccdc_set_params, + .configure = ccdc_configure, + .set_buftype = ccdc_set_buftype, + .get_buftype = ccdc_get_buftype, + .enum_pix = ccdc_enum_pix, + .set_pixel_format = ccdc_set_pixel_format, + .get_pixel_format = ccdc_get_pixel_format, + .set_frame_format = ccdc_set_frame_format, + .get_frame_format = ccdc_get_frame_format, + .set_image_window = ccdc_set_image_window, + .get_image_window = ccdc_get_image_window, + .get_line_length = ccdc_get_line_length, + .setfbaddr = ccdc_setfbaddr, + .getfid = ccdc_getfid, + }, +}; + +static int dm355_ccdc_init(void) +{ + printk(KERN_NOTICE "dm355_ccdc_init\n"); + if (vpfe_register_ccdc_device(&ccdc_hw_dev) < 0) + return -1; + printk(KERN_NOTICE "%s is registered with vpfe.\n", + ccdc_hw_dev.name); + return 0; +} + +static void dm355_ccdc_exit(void) +{ + vpfe_unregister_ccdc_device(&ccdc_hw_dev); +} + +module_init(dm355_ccdc_init); +module_exit(dm355_ccdc_exit); diff --git a/linux/drivers/media/video/davinci/dm355_ccdc_regs.h b/linux/drivers/media/video/davinci/dm355_ccdc_regs.h new file mode 100644 index 000000000..d6d2ef053 --- /dev/null +++ b/linux/drivers/media/video/davinci/dm355_ccdc_regs.h @@ -0,0 +1,310 @@ +/* + * Copyright (C) 2005-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _DM355_CCDC_REGS_H +#define _DM355_CCDC_REGS_H + +/**************************************************************************\ +* Register OFFSET Definitions +\**************************************************************************/ +#define SYNCEN 0x00 +#define MODESET 0x04 +#define HDWIDTH 0x08 +#define VDWIDTH 0x0c +#define PPLN 0x10 +#define LPFR 0x14 +#define SPH 0x18 +#define NPH 0x1c +#define SLV0 0x20 +#define SLV1 0x24 +#define NLV 0x28 +#define CULH 0x2c +#define CULV 0x30 +#define HSIZE 0x34 +#define SDOFST 0x38 +#define STADRH 0x3c +#define STADRL 0x40 +#define CLAMP 0x44 +#define DCSUB 0x48 +#define COLPTN 0x4c +#define BLKCMP0 0x50 +#define BLKCMP1 0x54 +#define MEDFILT 0x58 +#define RYEGAIN 0x5c +#define GRCYGAIN 0x60 +#define GBGGAIN 0x64 +#define BMGGAIN 0x68 +#define OFFSET 0x6c +#define OUTCLIP 0x70 +#define VDINT0 0x74 +#define VDINT1 0x78 +#define RSV0 0x7c +#define GAMMAWD 0x80 +#define REC656IF 0x84 +#define CCDCFG 0x88 +#define FMTCFG 0x8c +#define FMTPLEN 0x90 +#define FMTSPH 0x94 +#define FMTLNH 0x98 +#define FMTSLV 0x9c +#define FMTLNV 0xa0 +#define FMTRLEN 0xa4 +#define FMTHCNT 0xa8 +#define FMT_ADDR_PTR_B 0xac +#define FMT_ADDR_PTR(i) (FMT_ADDR_PTR_B + (i * 4)) +#define FMTPGM_VF0 0xcc +#define FMTPGM_VF1 0xd0 +#define FMTPGM_AP0 0xd4 +#define FMTPGM_AP1 0xd8 +#define FMTPGM_AP2 0xdc +#define FMTPGM_AP3 0xe0 +#define FMTPGM_AP4 0xe4 +#define FMTPGM_AP5 0xe8 +#define FMTPGM_AP6 0xec +#define FMTPGM_AP7 0xf0 +#define LSCCFG1 0xf4 +#define LSCCFG2 0xf8 +#define LSCH0 0xfc +#define LSCV0 0x100 +#define LSCKH 0x104 +#define LSCKV 0x108 +#define LSCMEMCTL 0x10c +#define LSCMEMD 0x110 +#define LSCMEMQ 0x114 +#define DFCCTL 0x118 +#define DFCVSAT 0x11c +#define DFCMEMCTL 0x120 +#define DFCMEM0 0x124 +#define DFCMEM1 0x128 +#define DFCMEM2 0x12c +#define DFCMEM3 0x130 +#define DFCMEM4 0x134 +#define CSCCTL 0x138 +#define CSCM0 0x13c +#define CSCM1 0x140 +#define CSCM2 0x144 +#define CSCM3 0x148 +#define CSCM4 0x14c +#define CSCM5 0x150 +#define CSCM6 0x154 +#define CSCM7 0x158 +#define DATAOFST 0x15c +#define CCDC_REG_LAST DATAOFST +/************************************************************** +* Define for various register bit mask and shifts for CCDC +* +**************************************************************/ +#define CCDC_RAW_IP_MODE 0 +#define CCDC_VDHDOUT_INPUT 0 +#define CCDC_YCINSWP_RAW (0 << 4) +#define CCDC_EXWEN_DISABLE 0 +#define CCDC_DATAPOL_NORMAL 0 +#define CCDC_CCDCFG_FIDMD_LATCH_VSYNC 0 +#define CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC (1 << 6) +#define CCDC_CCDCFG_WENLOG_AND 0 +#define CCDC_CCDCFG_TRGSEL_WEN 0 +#define CCDC_CCDCFG_EXTRG_DISABLE 0 +#define CCDC_CFA_MOSAIC 0 +#define CCDC_Y8POS_SHIFT 11 + +#define CCDC_VDC_DFCVSAT_MASK 0x3fff +#define CCDC_DATAOFST_MASK 0x0ff +#define CCDC_DATAOFST_H_SHIFT 0 +#define CCDC_DATAOFST_V_SHIFT 8 +#define CCDC_GAMMAWD_CFA_MASK 1 +#define CCDC_GAMMAWD_CFA_SHIFT 5 +#define CCDC_GAMMAWD_INPUT_SHIFT 2 +#define CCDC_FID_POL_MASK 1 +#define CCDC_FID_POL_SHIFT 4 +#define CCDC_HD_POL_MASK 1 +#define CCDC_HD_POL_SHIFT 3 +#define CCDC_VD_POL_MASK 1 +#define CCDC_VD_POL_SHIFT 2 +#define CCDC_VD_POL_NEGATIVE (1 << 2) +#define CCDC_FRM_FMT_MASK 1 +#define CCDC_FRM_FMT_SHIFT 7 +#define CCDC_DATA_SZ_MASK 7 +#define CCDC_DATA_SZ_SHIFT 8 +#define CCDC_VDHDOUT_MASK 1 +#define CCDC_VDHDOUT_SHIFT 0 +#define CCDC_EXWEN_MASK 1 +#define CCDC_EXWEN_SHIFT 5 +#define CCDC_INPUT_MODE_MASK 3 +#define CCDC_INPUT_MODE_SHIFT 12 +#define CCDC_PIX_FMT_MASK 3 +#define CCDC_PIX_FMT_SHIFT 12 +#define CCDC_DATAPOL_MASK 1 +#define CCDC_DATAPOL_SHIFT 6 +#define CCDC_WEN_ENABLE (1 << 1) +#define CCDC_VDHDEN_ENABLE (1 << 16) +#define CCDC_LPF_ENABLE (1 << 14) +#define CCDC_ALAW_ENABLE 1 +#define CCDC_ALAW_GAMA_WD_MASK 7 +#define CCDC_REC656IF_BT656_EN 3 + +#define CCDC_FMTCFG_FMTMODE_MASK 3 +#define CCDC_FMTCFG_FMTMODE_SHIFT 1 +#define CCDC_FMTCFG_LNUM_MASK 3 +#define CCDC_FMTCFG_LNUM_SHIFT 4 +#define CCDC_FMTCFG_ADDRINC_MASK 7 +#define CCDC_FMTCFG_ADDRINC_SHIFT 8 + +#define CCDC_CCDCFG_FIDMD_SHIFT 6 +#define CCDC_CCDCFG_WENLOG_SHIFT 8 +#define CCDC_CCDCFG_TRGSEL_SHIFT 9 +#define CCDC_CCDCFG_EXTRG_SHIFT 10 +#define CCDC_CCDCFG_MSBINVI_SHIFT 13 + +#define CCDC_HSIZE_FLIP_SHIFT 12 +#define CCDC_HSIZE_FLIP_MASK 1 +#define CCDC_HSIZE_VAL_MASK 0xFFF +#define CCDC_SDOFST_FIELD_INTERLEAVED 0x249 +#define CCDC_SDOFST_INTERLACE_INVERSE 0x4B6D +#define CCDC_SDOFST_INTERLACE_NORMAL 0x0B6D +#define CCDC_SDOFST_PROGRESSIVE_INVERSE 0x4000 +#define CCDC_SDOFST_PROGRESSIVE_NORMAL 0 +#define CCDC_START_PX_HOR_MASK 0x7FFF +#define CCDC_NUM_PX_HOR_MASK 0x7FFF +#define CCDC_START_VER_ONE_MASK 0x7FFF +#define CCDC_START_VER_TWO_MASK 0x7FFF +#define CCDC_NUM_LINES_VER 0x7FFF + +#define CCDC_BLK_CLAMP_ENABLE (1 << 15) +#define CCDC_BLK_SGAIN_MASK 0x1F +#define CCDC_BLK_ST_PXL_MASK 0x1FFF +#define CCDC_BLK_SAMPLE_LN_MASK 3 +#define CCDC_BLK_SAMPLE_LN_SHIFT 13 + +#define CCDC_NUM_LINE_CALC_MASK 3 +#define CCDC_NUM_LINE_CALC_SHIFT 14 + +#define CCDC_BLK_DC_SUB_MASK 0x3FFF +#define CCDC_BLK_COMP_MASK 0xFF +#define CCDC_BLK_COMP_GB_COMP_SHIFT 8 +#define CCDC_BLK_COMP_GR_COMP_SHIFT 0 +#define CCDC_BLK_COMP_R_COMP_SHIFT 8 +#define CCDC_LATCH_ON_VSYNC_DISABLE (1 << 15) +#define CCDC_LATCH_ON_VSYNC_ENABLE (0 << 15) +#define CCDC_FPC_ENABLE (1 << 15) +#define CCDC_FPC_FPC_NUM_MASK 0x7FFF +#define CCDC_DATA_PACK_ENABLE (1 << 11) +#define CCDC_FMT_HORZ_FMTLNH_MASK 0x1FFF +#define CCDC_FMT_HORZ_FMTSPH_MASK 0x1FFF +#define CCDC_FMT_HORZ_FMTSPH_SHIFT 16 +#define CCDC_FMT_VERT_FMTLNV_MASK 0x1FFF +#define CCDC_FMT_VERT_FMTSLV_MASK 0x1FFF +#define CCDC_FMT_VERT_FMTSLV_SHIFT 16 +#define CCDC_VP_OUT_VERT_NUM_MASK 0x3FFF +#define CCDC_VP_OUT_VERT_NUM_SHIFT 17 +#define CCDC_VP_OUT_HORZ_NUM_MASK 0x1FFF +#define CCDC_VP_OUT_HORZ_NUM_SHIFT 4 +#define CCDC_VP_OUT_HORZ_ST_MASK 0xF + +#define CCDC_CSC_COEF_INTEG_MASK 7 +#define CCDC_CSC_COEF_DECIMAL_MASK 0x1f +#define CCDC_CSC_COEF_INTEG_SHIFT 5 +#define CCDC_CSCM_MSB_SHIFT 8 +#define CCDC_CSC_ENABLE 1 +#define CCDC_CSC_DEC_MAX 32 + +#define CCDC_MFILT1_SHIFT 10 +#define CCDC_MFILT2_SHIFT 8 +#define CCDC_MED_FILT_THRESH 0x3FFF +#define CCDC_LPF_MASK 1 +#define CCDC_LPF_SHIFT 14 +#define CCDC_OFFSET_MASK 0x3FF +#define CCDC_DATASFT_MASK 7 +#define CCDC_DATASFT_SHIFT 8 + +#define CCDC_DF_ENABLE 1 + +#define CCDC_FMTPLEN_P0_MASK 0xF +#define CCDC_FMTPLEN_P1_MASK 0xF +#define CCDC_FMTPLEN_P2_MASK 7 +#define CCDC_FMTPLEN_P3_MASK 7 +#define CCDC_FMTPLEN_P0_SHIFT 0 +#define CCDC_FMTPLEN_P1_SHIFT 4 +#define CCDC_FMTPLEN_P2_SHIFT 8 +#define CCDC_FMTPLEN_P3_SHIFT 12 + +#define CCDC_FMTSPH_MASK 0x1FFF +#define CCDC_FMTLNH_MASK 0x1FFF +#define CCDC_FMTSLV_MASK 0x1FFF +#define CCDC_FMTLNV_MASK 0x7FFF +#define CCDC_FMTRLEN_MASK 0x1FFF +#define CCDC_FMTHCNT_MASK 0x1FFF + +#define CCDC_ADP_INIT_MASK 0x1FFF +#define CCDC_ADP_LINE_SHIFT 13 +#define CCDC_ADP_LINE_MASK 3 +#define CCDC_FMTPGN_APTR_MASK 7 + +#define CCDC_DFCCTL_GDFCEN_MASK 1 +#define CCDC_DFCCTL_VDFCEN_MASK 1 +#define CCDC_DFCCTL_VDFC_DISABLE (0 << 4) +#define CCDC_DFCCTL_VDFCEN_SHIFT 4 +#define CCDC_DFCCTL_VDFCSL_MASK 3 +#define CCDC_DFCCTL_VDFCSL_SHIFT 5 +#define CCDC_DFCCTL_VDFCUDA_MASK 1 +#define CCDC_DFCCTL_VDFCUDA_SHIFT 7 +#define CCDC_DFCCTL_VDFLSFT_MASK 3 +#define CCDC_DFCCTL_VDFLSFT_SHIFT 8 +#define CCDC_DFCMEMCTL_DFCMARST_MASK 1 +#define CCDC_DFCMEMCTL_DFCMARST_SHIFT 2 +#define CCDC_DFCMEMCTL_DFCMWR_MASK 1 +#define CCDC_DFCMEMCTL_DFCMWR_SHIFT 0 +#define CCDC_DFCMEMCTL_INC_ADDR (0 << 2) + +#define CCDC_LSCCFG_GFTSF_MASK 7 +#define CCDC_LSCCFG_GFTSF_SHIFT 1 +#define CCDC_LSCCFG_GFTINV_MASK 0xf +#define CCDC_LSCCFG_GFTINV_SHIFT 4 +#define CCDC_LSC_GFTABLE_SEL_MASK 3 +#define CCDC_LSC_GFTABLE_EPEL_SHIFT 8 +#define CCDC_LSC_GFTABLE_OPEL_SHIFT 10 +#define CCDC_LSC_GFTABLE_EPOL_SHIFT 12 +#define CCDC_LSC_GFTABLE_OPOL_SHIFT 14 +#define CCDC_LSC_GFMODE_MASK 3 +#define CCDC_LSC_GFMODE_SHIFT 4 +#define CCDC_LSC_DISABLE 0 +#define CCDC_LSC_ENABLE 1 +#define CCDC_LSC_TABLE1_SLC 0 +#define CCDC_LSC_TABLE2_SLC 1 +#define CCDC_LSC_TABLE3_SLC 2 +#define CCDC_LSC_MEMADDR_RESET (1 << 2) +#define CCDC_LSC_MEMADDR_INCR (0 << 2) +#define CCDC_LSC_FRAC_MASK_T1 0xFF +#define CCDC_LSC_INT_MASK 3 +#define CCDC_LSC_FRAC_MASK 0x3FFF +#define CCDC_LSC_CENTRE_MASK 0x3FFF +#define CCDC_LSC_COEF_MASK 0xff +#define CCDC_LSC_COEFL_SHIFT 0 +#define CCDC_LSC_COEFU_SHIFT 8 +#define CCDC_GAIN_MASK 0x7FF +#define CCDC_SYNCEN_VDHDEN_MASK (1 << 0) +#define CCDC_SYNCEN_WEN_MASK (1 << 1) +#define CCDC_SYNCEN_WEN_SHIFT 1 + +/* Power on Defaults in hardware */ +#define MODESET_DEFAULT 0x200 +#define CULH_DEFAULT 0xFFFF +#define CULV_DEFAULT 0xFF +#define GAIN_DEFAULT 256 +#define OUTCLIP_DEFAULT 0x3FFF +#define LSCCFG2_DEFAULT 0xE + +#endif diff --git a/linux/drivers/media/video/davinci/dm644x_ccdc.c b/linux/drivers/media/video/davinci/dm644x_ccdc.c new file mode 100644 index 000000000..2f19a919f --- /dev/null +++ b/linux/drivers/media/video/davinci/dm644x_ccdc.c @@ -0,0 +1,878 @@ +/* + * Copyright (C) 2006-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * CCDC hardware module for DM6446 + * ------------------------------ + * + * This module is for configuring CCD controller of DM6446 VPFE to capture + * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules + * such as Defect Pixel Correction, Color Space Conversion etc to + * pre-process the Raw Bayer RGB data, before writing it to SDRAM. This + * module also allows application to configure individual + * module parameters through VPFE_CMD_S_CCDC_RAW_PARAMS IOCTL. + * To do so, application includes dm644x_ccdc.h and vpfe_capture.h header + * files. The setparams() API is called by vpfe_capture driver + * to configure module parameters. This file is named DM644x so that other + * variants such DM6443 may be supported using the same module. + * + * TODO: Test Raw bayer parameter settings and bayer capture + * Split module parameter structure to module specific ioctl structs + * investigate if enum used for user space type definition + * to be replaced by #defines or integer + */ +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/videodev2.h> +#include <media/davinci/dm644x_ccdc.h> +#include <media/davinci/vpss.h> +#include "dm644x_ccdc_regs.h" +#include "ccdc_hw_device.h" + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("CCDC Driver for DM6446"); +MODULE_AUTHOR("Texas Instruments"); + +static struct device *dev; + +/* Object for CCDC raw mode */ +static struct ccdc_params_raw ccdc_hw_params_raw = { + .pix_fmt = CCDC_PIXFMT_RAW, + .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, + .win = CCDC_WIN_VGA, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .config_params = { + .data_sz = CCDC_DATA_10BITS, + }, +}; + +/* Object for CCDC ycbcr mode */ +static struct ccdc_params_ycbcr ccdc_hw_params_ycbcr = { + .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, + .frm_fmt = CCDC_FRMFMT_INTERLACED, + .win = CCDC_WIN_PAL, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .bt656_enable = 1, + .pix_order = CCDC_PIXORDER_CBYCRY, + .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED +}; + +#define CCDC_MAX_RAW_YUV_FORMATS 2 + +/* Raw Bayer formats */ +static u32 ccdc_raw_bayer_pix_formats[] = + {V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; + +/* Raw YUV formats */ +static u32 ccdc_raw_yuv_pix_formats[] = + {V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; + +static void *__iomem ccdc_base_addr; +static int ccdc_addr_size; +static enum vpfe_hw_if_type ccdc_if_type; + +/* register access routines */ +static inline u32 regr(u32 offset) +{ + return __raw_readl(ccdc_base_addr + offset); +} + +static inline void regw(u32 val, u32 offset) +{ + __raw_writel(val, ccdc_base_addr + offset); +} + +static void ccdc_set_ccdc_base(void *addr, int size) +{ + ccdc_base_addr = addr; + ccdc_addr_size = size; +} + +static void ccdc_enable(int flag) +{ + regw(flag, CCDC_PCR); +} + +static void ccdc_enable_vport(int flag) +{ + if (flag) + /* enable video port */ + regw(CCDC_ENABLE_VIDEO_PORT, CCDC_FMTCFG); + else + regw(CCDC_DISABLE_VIDEO_PORT, CCDC_FMTCFG); +} + +/* + * ccdc_setwin() + * This function will configure the window size + * to be capture in CCDC reg + */ +void ccdc_setwin(struct v4l2_rect *image_win, + enum ccdc_frmfmt frm_fmt, + int ppc) +{ + int horz_start, horz_nr_pixels; + int vert_start, vert_nr_lines; + int val = 0, mid_img = 0; + + dev_dbg(dev, "\nStarting ccdc_setwin..."); + /* + * ppc - per pixel count. indicates how many pixels per cell + * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. + * raw capture this is 1 + */ + horz_start = image_win->left << (ppc - 1); + horz_nr_pixels = (image_win->width << (ppc - 1)) - 1; + regw((horz_start << CCDC_HORZ_INFO_SPH_SHIFT) | horz_nr_pixels, + CCDC_HORZ_INFO); + + vert_start = image_win->top; + + if (frm_fmt == CCDC_FRMFMT_INTERLACED) { + vert_nr_lines = (image_win->height >> 1) - 1; + vert_start >>= 1; + /* Since first line doesn't have any data */ + vert_start += 1; + /* configure VDINT0 */ + val = (vert_start << CCDC_VDINT_VDINT0_SHIFT); + regw(val, CCDC_VDINT); + + } else { + /* Since first line doesn't have any data */ + vert_start += 1; + vert_nr_lines = image_win->height - 1; + /* + * configure VDINT0 and VDINT1. VDINT1 will be at half + * of image height + */ + mid_img = vert_start + (image_win->height / 2); + val = (vert_start << CCDC_VDINT_VDINT0_SHIFT) | + (mid_img & CCDC_VDINT_VDINT1_MASK); + regw(val, CCDC_VDINT); + + } + regw((vert_start << CCDC_VERT_START_SLV0_SHIFT) | vert_start, + CCDC_VERT_START); + regw(vert_nr_lines, CCDC_VERT_LINES); + dev_dbg(dev, "\nEnd of ccdc_setwin..."); +} + +static void ccdc_readregs(void) +{ + unsigned int val = 0; + + val = regr(CCDC_ALAW); + dev_notice(dev, "\nReading 0x%x to ALAW...\n", val); + val = regr(CCDC_CLAMP); + dev_notice(dev, "\nReading 0x%x to CLAMP...\n", val); + val = regr(CCDC_DCSUB); + dev_notice(dev, "\nReading 0x%x to DCSUB...\n", val); + val = regr(CCDC_BLKCMP); + dev_notice(dev, "\nReading 0x%x to BLKCMP...\n", val); + val = regr(CCDC_FPC_ADDR); + dev_notice(dev, "\nReading 0x%x to FPC_ADDR...\n", val); + val = regr(CCDC_FPC); + dev_notice(dev, "\nReading 0x%x to FPC...\n", val); + val = regr(CCDC_FMTCFG); + dev_notice(dev, "\nReading 0x%x to FMTCFG...\n", val); + val = regr(CCDC_COLPTN); + dev_notice(dev, "\nReading 0x%x to COLPTN...\n", val); + val = regr(CCDC_FMT_HORZ); + dev_notice(dev, "\nReading 0x%x to FMT_HORZ...\n", val); + val = regr(CCDC_FMT_VERT); + dev_notice(dev, "\nReading 0x%x to FMT_VERT...\n", val); + val = regr(CCDC_HSIZE_OFF); + dev_notice(dev, "\nReading 0x%x to HSIZE_OFF...\n", val); + val = regr(CCDC_SDOFST); + dev_notice(dev, "\nReading 0x%x to SDOFST...\n", val); + val = regr(CCDC_VP_OUT); + dev_notice(dev, "\nReading 0x%x to VP_OUT...\n", val); + val = regr(CCDC_SYN_MODE); + dev_notice(dev, "\nReading 0x%x to SYN_MODE...\n", val); + val = regr(CCDC_HORZ_INFO); + dev_notice(dev, "\nReading 0x%x to HORZ_INFO...\n", val); + val = regr(CCDC_VERT_START); + dev_notice(dev, "\nReading 0x%x to VERT_START...\n", val); + val = regr(CCDC_VERT_LINES); + dev_notice(dev, "\nReading 0x%x to VERT_LINES...\n", val); +} + +static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam) +{ + if (ccdcparam->alaw.enable) { + if ((ccdcparam->alaw.gama_wd > CCDC_GAMMA_BITS_09_0) || + (ccdcparam->alaw.gama_wd < CCDC_GAMMA_BITS_15_6) || + (ccdcparam->alaw.gama_wd < ccdcparam->data_sz)) { + dev_dbg(dev, "\nInvalid data line select"); + return -1; + } + } + return 0; +} + +static int ccdc_update_raw_params(struct ccdc_config_params_raw *raw_params) +{ + struct ccdc_config_params_raw *config_params = + &ccdc_hw_params_raw.config_params; + unsigned int *fpc_virtaddr = NULL; + unsigned int *fpc_physaddr = NULL; + + memcpy(config_params, raw_params, sizeof(*raw_params)); + /* + * allocate memory for fault pixel table and copy the user + * values to the table + */ + if (!config_params->fault_pxl.enable) + return 0; + + fpc_physaddr = (unsigned int *)config_params->fault_pxl.fpc_table_addr; + fpc_virtaddr = (unsigned int *)phys_to_virt( + (unsigned long)fpc_physaddr); + /* + * Allocate memory for FPC table if current + * FPC table buffer is not big enough to + * accomodate FPC Number requested + */ + if (raw_params->fault_pxl.fp_num != config_params->fault_pxl.fp_num) { + if (fpc_physaddr != NULL) { + free_pages((unsigned long)fpc_physaddr, + get_order + (config_params->fault_pxl.fp_num * + FP_NUM_BYTES)); + } + + /* Allocate memory for FPC table */ + fpc_virtaddr = + (unsigned int *)__get_free_pages(GFP_KERNEL | GFP_DMA, + get_order(raw_params-> + fault_pxl.fp_num * + FP_NUM_BYTES)); + + if (fpc_virtaddr == NULL) { + dev_dbg(dev, + "\nUnable to allocate memory for FPC"); + return -EFAULT; + } + fpc_physaddr = + (unsigned int *)virt_to_phys((void *)fpc_virtaddr); + } + + /* Copy number of fault pixels and FPC table */ + config_params->fault_pxl.fp_num = raw_params->fault_pxl.fp_num; + if (copy_from_user(fpc_virtaddr, + (void __user *)raw_params->fault_pxl.fpc_table_addr, + config_params->fault_pxl.fp_num * FP_NUM_BYTES)) { + dev_dbg(dev, "\n copy_from_user failed"); + return -EFAULT; + } + config_params->fault_pxl.fpc_table_addr = (unsigned int)fpc_physaddr; + return 0; +} + +static int ccdc_close(struct device *dev) +{ + struct ccdc_config_params_raw *config_params = + &ccdc_hw_params_raw.config_params; + unsigned int *fpc_physaddr = NULL, *fpc_virtaddr = NULL; + + fpc_physaddr = (unsigned int *)config_params->fault_pxl.fpc_table_addr; + + if (fpc_physaddr != NULL) { + fpc_virtaddr = (unsigned int *) + phys_to_virt((unsigned long)fpc_physaddr); + free_pages((unsigned long)fpc_virtaddr, + get_order(config_params->fault_pxl.fp_num * + FP_NUM_BYTES)); + } + return 0; +} + +/* + * ccdc_restore_defaults() + * This function will write defaults to all CCDC registers + */ +static void ccdc_restore_defaults(void) +{ + int i; + + /* disable CCDC */ + ccdc_enable(0); + /* set all registers to default value */ + for (i = 4; i <= 0x94; i += 4) + regw(0, i); + regw(CCDC_NO_CULLING, CCDC_CULLING); + regw(CCDC_GAMMA_BITS_11_2, CCDC_ALAW); +} + +static int ccdc_open(struct device *device) +{ + dev = device; + ccdc_restore_defaults(); + if (ccdc_if_type == VPFE_RAW_BAYER) + ccdc_enable_vport(1); + return 0; +} + +static void ccdc_sbl_reset(void) +{ + vpss_clear_wbl_overflow(VPSS_PCR_CCDC_WBL_O); +} + +/* Parameter operations */ +static int ccdc_set_params(void __user *params) +{ + struct ccdc_config_params_raw ccdc_raw_params; + int x; + + if (ccdc_if_type != VPFE_RAW_BAYER) + return -EINVAL; + + x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params)); + if (x) { + dev_dbg(dev, "ccdc_set_params: error in copying" + "ccdc params, %d\n", x); + return -EFAULT; + } + + if (!validate_ccdc_param(&ccdc_raw_params)) { + if (!ccdc_update_raw_params(&ccdc_raw_params)) + return 0; + } + return -EINVAL; +} + +/* + * ccdc_config_ycbcr() + * This function will configure CCDC for YCbCr video capture + */ +void ccdc_config_ycbcr(void) +{ + struct ccdc_params_ycbcr *params = &ccdc_hw_params_ycbcr; + u32 syn_mode; + + dev_dbg(dev, "\nStarting ccdc_config_ycbcr..."); + /* + * first restore the CCDC registers to default values + * This is important since we assume default values to be set in + * a lot of registers that we didn't touch + */ + ccdc_restore_defaults(); + + /* + * configure pixel format, frame format, configure video frame + * format, enable output to SDRAM, enable internal timing generator + * and 8bit pack mode + */ + syn_mode = (((params->pix_fmt & CCDC_SYN_MODE_INPMOD_MASK) << + CCDC_SYN_MODE_INPMOD_SHIFT) | + ((params->frm_fmt & CCDC_SYN_FLDMODE_MASK) << + CCDC_SYN_FLDMODE_SHIFT) | CCDC_VDHDEN_ENABLE | + CCDC_WEN_ENABLE | CCDC_DATA_PACK_ENABLE); + + /* setup BT.656 sync mode */ + if (params->bt656_enable) { + regw(CCDC_REC656IF_BT656_EN, CCDC_REC656IF); + + /* + * configure the FID, VD, HD pin polarity, + * fld,hd pol positive, vd negative, 8-bit data + */ + syn_mode |= CCDC_SYN_MODE_VD_POL_NEGATIVE | CCDC_SYN_MODE_8BITS; + } else { + /* y/c external sync mode */ + syn_mode |= (((params->fid_pol & CCDC_FID_POL_MASK) << + CCDC_FID_POL_SHIFT) | + ((params->hd_pol & CCDC_HD_POL_MASK) << + CCDC_HD_POL_SHIFT) | + ((params->vd_pol & CCDC_VD_POL_MASK) << + CCDC_VD_POL_SHIFT)); + } + regw(syn_mode, CCDC_SYN_MODE); + + /* configure video window */ + ccdc_setwin(¶ms->win, params->frm_fmt, 2); + + /* + * configure the order of y cb cr in SDRAM, and disable latch + * internal register on vsync + */ + regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) | + CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG); + + /* + * configure the horizontal line offset. This should be a + * on 32 byte bondary. So clear LSB 5 bits + */ + regw(((params->win.width * 2 + 31) & ~0x1f), CCDC_HSIZE_OFF); + + /* configure the memory line offset */ + if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) + /* two fields are interleaved in memory */ + regw(CCDC_SDOFST_FIELD_INTERLEAVED, CCDC_SDOFST); + + ccdc_sbl_reset(); + dev_dbg(dev, "\nEnd of ccdc_config_ycbcr...\n"); + ccdc_readregs(); +} + +static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp) +{ + u32 val; + + if (!bclamp->enable) { + /* configure DCSub */ + val = (bclamp->dc_sub) & CCDC_BLK_DC_SUB_MASK; + regw(val, CCDC_DCSUB); + dev_dbg(dev, "\nWriting 0x%x to DCSUB...\n", val); + regw(CCDC_CLAMP_DEFAULT_VAL, CCDC_CLAMP); + dev_dbg(dev, "\nWriting 0x0000 to CLAMP...\n"); + return; + } + /* + * Configure gain, Start pixel, No of line to be avg, + * No of pixel/line to be avg, & Enable the Black clamping + */ + val = ((bclamp->sgain & CCDC_BLK_SGAIN_MASK) | + ((bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) << + CCDC_BLK_ST_PXL_SHIFT) | + ((bclamp->sample_ln & CCDC_BLK_SAMPLE_LINE_MASK) << + CCDC_BLK_SAMPLE_LINE_SHIFT) | + ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) << + CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE); + regw(val, CCDC_CLAMP); + dev_dbg(dev, "\nWriting 0x%x to CLAMP...\n", val); + /* If Black clamping is enable then make dcsub 0 */ + regw(CCDC_DCSUB_DEFAULT_VAL, CCDC_DCSUB); + dev_dbg(dev, "\nWriting 0x00000000 to DCSUB...\n"); +} + +static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp) +{ + u32 val; + + val = ((bcomp->b & CCDC_BLK_COMP_MASK) | + ((bcomp->gb & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_GB_COMP_SHIFT) | + ((bcomp->gr & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_GR_COMP_SHIFT) | + ((bcomp->r & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_R_COMP_SHIFT)); + regw(val, CCDC_BLKCMP); +} + +static void ccdc_config_fpc(struct ccdc_fault_pixel *fpc) +{ + u32 val; + + /* Initially disable FPC */ + val = CCDC_FPC_DISABLE; + regw(val, CCDC_FPC); + + if (!fpc->enable) + return; + + /* Configure Fault pixel if needed */ + regw(fpc->fpc_table_addr, CCDC_FPC_ADDR); + dev_dbg(dev, "\nWriting 0x%x to FPC_ADDR...\n", + (fpc->fpc_table_addr)); + /* Write the FPC params with FPC disable */ + val = fpc->fp_num & CCDC_FPC_FPC_NUM_MASK; + regw(val, CCDC_FPC); + + dev_dbg(dev, "\nWriting 0x%x to FPC...\n", val); + /* read the FPC register */ + val = regr(CCDC_FPC) | CCDC_FPC_ENABLE; + regw(val, CCDC_FPC); + dev_dbg(dev, "\nWriting 0x%x to FPC...\n", val); +} + +/* + * ccdc_config_raw() + * This function will configure CCDC for Raw capture mode + */ +void ccdc_config_raw(void) +{ + struct ccdc_params_raw *params = &ccdc_hw_params_raw; + struct ccdc_config_params_raw *config_params = + &ccdc_hw_params_raw.config_params; + unsigned int syn_mode = 0; + unsigned int val; + + dev_dbg(dev, "\nStarting ccdc_config_raw..."); + + /* Reset CCDC */ + ccdc_restore_defaults(); + + /* Disable latching function registers on VSYNC */ + regw(CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG); + + /* + * Configure the vertical sync polarity(SYN_MODE.VDPOL), + * horizontal sync polarity (SYN_MODE.HDPOL), frame id polarity + * (SYN_MODE.FLDPOL), frame format(progressive or interlace), + * data size(SYNMODE.DATSIZ), &pixel format (Input mode), output + * SDRAM, enable internal timing generator + */ + syn_mode = + (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) | + ((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) | + ((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) | + ((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) | + ((config_params->data_sz & CCDC_DATA_SZ_MASK) << + CCDC_DATA_SZ_SHIFT) | + ((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT) | + CCDC_WEN_ENABLE | CCDC_VDHDEN_ENABLE); + + /* Enable and configure aLaw register if needed */ + if (config_params->alaw.enable) { + val = ((config_params->alaw.gama_wd & + CCDC_ALAW_GAMA_WD_MASK) | CCDC_ALAW_ENABLE); + regw(val, CCDC_ALAW); + dev_dbg(dev, "\nWriting 0x%x to ALAW...\n", val); + } + + /* Configure video window */ + ccdc_setwin(¶ms->win, params->frm_fmt, CCDC_PPC_RAW); + + /* Configure Black Clamp */ + ccdc_config_black_clamp(&config_params->blk_clamp); + + /* Configure Black level compensation */ + ccdc_config_black_compense(&config_params->blk_comp); + + /* Configure Fault Pixel Correction */ + ccdc_config_fpc(&config_params->fault_pxl); + + /* If data size is 8 bit then pack the data */ + if ((config_params->data_sz == CCDC_DATA_8BITS) || + config_params->alaw.enable) + syn_mode |= CCDC_DATA_PACK_ENABLE; + +#ifdef CONFIG_DM644X_VIDEO_PORT_ENABLE + /* enable video port */ + val = CCDC_ENABLE_VIDEO_PORT; +#else + /* disable video port */ + val = CCDC_DISABLE_VIDEO_PORT; +#endif + + if (config_params->data_sz == CCDC_DATA_8BITS) + val |= (CCDC_DATA_10BITS & CCDC_FMTCFG_VPIN_MASK) + << CCDC_FMTCFG_VPIN_SHIFT; + else + val |= (config_params->data_sz & CCDC_FMTCFG_VPIN_MASK) + << CCDC_FMTCFG_VPIN_SHIFT; + /* Write value in FMTCFG */ + regw(val, CCDC_FMTCFG); + + dev_dbg(dev, "\nWriting 0x%x to FMTCFG...\n", val); + /* Configure the color pattern according to mt9t001 sensor */ + regw(CCDC_COLPTN_VAL, CCDC_COLPTN); + + dev_dbg(dev, "\nWriting 0xBB11BB11 to COLPTN...\n"); + /* + * Configure Data formatter(Video port) pixel selection + * (FMT_HORZ, FMT_VERT) + */ + val = ((params->win.left & CCDC_FMT_HORZ_FMTSPH_MASK) << + CCDC_FMT_HORZ_FMTSPH_SHIFT) | + (params->win.width & CCDC_FMT_HORZ_FMTLNH_MASK); + regw(val, CCDC_FMT_HORZ); + + dev_dbg(dev, "\nWriting 0x%x to FMT_HORZ...\n", val); + val = (params->win.top & CCDC_FMT_VERT_FMTSLV_MASK) + << CCDC_FMT_VERT_FMTSLV_SHIFT; + if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) + val |= (params->win.height) & CCDC_FMT_VERT_FMTLNV_MASK; + else + val |= (params->win.height >> 1) & CCDC_FMT_VERT_FMTLNV_MASK; + + dev_dbg(dev, "\nparams->win.height 0x%x ...\n", + params->win.height); + regw(val, CCDC_FMT_VERT); + + dev_dbg(dev, "\nWriting 0x%x to FMT_VERT...\n", val); + + dev_dbg(dev, "\nbelow regw(val, FMT_VERT)..."); + + /* + * Configure Horizontal offset register. If pack 8 is enabled then + * 1 pixel will take 1 byte + */ + if ((config_params->data_sz == CCDC_DATA_8BITS) || + config_params->alaw.enable) + regw((params->win.width + CCDC_32BYTE_ALIGN_VAL) & + CCDC_HSIZE_OFF_MASK, CCDC_HSIZE_OFF); + else + /* else one pixel will take 2 byte */ + regw(((params->win.width * CCDC_TWO_BYTES_PER_PIXEL) + + CCDC_32BYTE_ALIGN_VAL) & CCDC_HSIZE_OFF_MASK, + CCDC_HSIZE_OFF); + + /* Set value for SDOFST */ + if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) { + if (params->image_invert_enable) { + /* For intelace inverse mode */ + regw(CCDC_INTERLACED_IMAGE_INVERT, CCDC_SDOFST); + dev_dbg(dev, "\nWriting 0x4B6D to SDOFST...\n"); + } + + else { + /* For intelace non inverse mode */ + regw(CCDC_INTERLACED_NO_IMAGE_INVERT, CCDC_SDOFST); + dev_dbg(dev, "\nWriting 0x0249 to SDOFST...\n"); + } + } else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) { + regw(CCDC_PROGRESSIVE_NO_IMAGE_INVERT, CCDC_SDOFST); + dev_dbg(dev, "\nWriting 0x0000 to SDOFST...\n"); + } + + /* + * Configure video port pixel selection (VPOUT) + * Here -1 is to make the height value less than FMT_VERT.FMTLNV + */ + if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) + val = (((params->win.height - 1) & CCDC_VP_OUT_VERT_NUM_MASK)) + << CCDC_VP_OUT_VERT_NUM_SHIFT; + else + val = + ((((params->win.height >> CCDC_INTERLACED_HEIGHT_SHIFT) - + 1) & CCDC_VP_OUT_VERT_NUM_MASK)) << + CCDC_VP_OUT_VERT_NUM_SHIFT; + + val |= ((((params->win.width))) & CCDC_VP_OUT_HORZ_NUM_MASK) + << CCDC_VP_OUT_HORZ_NUM_SHIFT; + val |= (params->win.left) & CCDC_VP_OUT_HORZ_ST_MASK; + regw(val, CCDC_VP_OUT); + + dev_dbg(dev, "\nWriting 0x%x to VP_OUT...\n", val); + regw(syn_mode, CCDC_SYN_MODE); + dev_dbg(dev, "\nWriting 0x%x to SYN_MODE...\n", syn_mode); + + ccdc_sbl_reset(); + dev_dbg(dev, "\nend of ccdc_config_raw..."); + ccdc_readregs(); +} + +static int ccdc_configure(void) +{ + if (ccdc_if_type == VPFE_RAW_BAYER) + ccdc_config_raw(); + else + ccdc_config_ycbcr(); + return 0; +} + +static int ccdc_set_buftype(enum ccdc_buftype buf_type) +{ + if (ccdc_if_type == VPFE_RAW_BAYER) + ccdc_hw_params_raw.buf_type = buf_type; + else + ccdc_hw_params_ycbcr.buf_type = buf_type; + return 0; +} + +static enum ccdc_buftype ccdc_get_buftype(void) +{ + if (ccdc_if_type == VPFE_RAW_BAYER) + return ccdc_hw_params_raw.buf_type; + return ccdc_hw_params_ycbcr.buf_type; +} + +static int ccdc_enum_pix(u32 *pix, int i) +{ + int ret = -EINVAL; + if (ccdc_if_type == VPFE_RAW_BAYER) { + if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) { + *pix = ccdc_raw_bayer_pix_formats[i]; + ret = 0; + } + } else { + if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) { + *pix = ccdc_raw_yuv_pix_formats[i]; + ret = 0; + } + } + return ret; +} + +static int ccdc_set_pixel_format(u32 pixfmt) +{ + if (ccdc_if_type == VPFE_RAW_BAYER) { + ccdc_hw_params_raw.pix_fmt = CCDC_PIXFMT_RAW; + if (pixfmt == V4L2_PIX_FMT_SBGGR8) + ccdc_hw_params_raw.config_params.alaw.enable = 1; + else if (pixfmt != V4L2_PIX_FMT_SBGGR16) + return -EINVAL; + } else { + if (pixfmt == V4L2_PIX_FMT_YUYV) + ccdc_hw_params_ycbcr.pix_order = CCDC_PIXORDER_YCBYCR; + else if (pixfmt == V4L2_PIX_FMT_UYVY) + ccdc_hw_params_ycbcr.pix_order = CCDC_PIXORDER_CBYCRY; + else + return -EINVAL; + } + return 0; +} + +static u32 ccdc_get_pixel_format(void) +{ + struct ccdc_a_law *alaw = + &ccdc_hw_params_raw.config_params.alaw; + u32 pixfmt; + + if (ccdc_if_type == VPFE_RAW_BAYER) + if (alaw->enable) + pixfmt = V4L2_PIX_FMT_SBGGR8; + else + pixfmt = V4L2_PIX_FMT_SBGGR16; + else { + if (ccdc_hw_params_ycbcr.pix_order == CCDC_PIXORDER_YCBYCR) + pixfmt = V4L2_PIX_FMT_YUYV; + else + pixfmt = V4L2_PIX_FMT_UYVY; + } + return pixfmt; +} + +static int ccdc_set_image_window(struct v4l2_rect *win) +{ + if (ccdc_if_type == VPFE_RAW_BAYER) + ccdc_hw_params_raw.win = *win; + else + ccdc_hw_params_ycbcr.win = *win; + return 0; +} + +static void ccdc_get_image_window(struct v4l2_rect *win) +{ + if (ccdc_if_type == VPFE_RAW_BAYER) + *win = ccdc_hw_params_raw.win; + else + *win = ccdc_hw_params_ycbcr.win; +} + +static unsigned int ccdc_get_line_length(void) +{ + struct ccdc_config_params_raw *config_params = + &ccdc_hw_params_raw.config_params; + unsigned int len; + + if (ccdc_if_type == VPFE_RAW_BAYER) { + if ((config_params->alaw.enable) || + (config_params->data_sz == CCDC_DATA_8BITS)) + len = ccdc_hw_params_raw.win.width; + else + len = ccdc_hw_params_raw.win.width * 2; + } else + len = ccdc_hw_params_ycbcr.win.width * 2; + return ALIGN(len, 32); +} + +static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt) +{ + if (ccdc_if_type == VPFE_RAW_BAYER) + ccdc_hw_params_raw.frm_fmt = frm_fmt; + else + ccdc_hw_params_ycbcr.frm_fmt = frm_fmt; + return 0; +} + +static enum ccdc_frmfmt ccdc_get_frame_format(void) +{ + if (ccdc_if_type == VPFE_RAW_BAYER) + return ccdc_hw_params_raw.frm_fmt; + else + return ccdc_hw_params_ycbcr.frm_fmt; +} + +static int ccdc_getfid(void) +{ + return (regr(CCDC_SYN_MODE) >> 15) & 1; +} + +/* misc operations */ +static inline void ccdc_setfbaddr(unsigned long addr) +{ + regw(addr & 0xffffffe0, CCDC_SDR_ADDR); +} + +static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params) +{ + ccdc_if_type = params->if_type; + + switch (params->if_type) { + case VPFE_BT656: + case VPFE_YCBCR_SYNC_16: + case VPFE_YCBCR_SYNC_8: + ccdc_hw_params_ycbcr.vd_pol = params->vdpol; + ccdc_hw_params_ycbcr.hd_pol = params->hdpol; + break; + default: + /* TODO add support for raw bayer here */ + return -EINVAL; + } + return 0; +} + +static struct ccdc_hw_device ccdc_hw_dev = { + .name = "DM6446 CCDC", + .owner = THIS_MODULE, + .hw_ops = { + .open = ccdc_open, + .close = ccdc_close, + .set_ccdc_base = ccdc_set_ccdc_base, + .reset = ccdc_sbl_reset, + .enable = ccdc_enable, + .set_hw_if_params = ccdc_set_hw_if_params, + .set_params = ccdc_set_params, + .configure = ccdc_configure, + .set_buftype = ccdc_set_buftype, + .get_buftype = ccdc_get_buftype, + .enum_pix = ccdc_enum_pix, + .set_pixel_format = ccdc_set_pixel_format, + .get_pixel_format = ccdc_get_pixel_format, + .set_frame_format = ccdc_set_frame_format, + .get_frame_format = ccdc_get_frame_format, + .set_image_window = ccdc_set_image_window, + .get_image_window = ccdc_get_image_window, + .get_line_length = ccdc_get_line_length, + .setfbaddr = ccdc_setfbaddr, + .getfid = ccdc_getfid, + }, +}; + +static int dm644x_ccdc_init(void) +{ + printk(KERN_NOTICE "dm644x_ccdc_init\n"); + if (vpfe_register_ccdc_device(&ccdc_hw_dev) < 0) + return -1; + printk(KERN_NOTICE "%s is registered with vpfe.\n", + ccdc_hw_dev.name); + return 0; +} + +static void dm644x_ccdc_exit(void) +{ + vpfe_unregister_ccdc_device(&ccdc_hw_dev); +} + +module_init(dm644x_ccdc_init); +module_exit(dm644x_ccdc_exit); diff --git a/linux/drivers/media/video/davinci/dm644x_ccdc_regs.h b/linux/drivers/media/video/davinci/dm644x_ccdc_regs.h new file mode 100644 index 000000000..6e5d05324 --- /dev/null +++ b/linux/drivers/media/video/davinci/dm644x_ccdc_regs.h @@ -0,0 +1,145 @@ +/* + * Copyright (C) 2006-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _DM644X_CCDC_REGS_H +#define _DM644X_CCDC_REGS_H + +/**************************************************************************\ +* Register OFFSET Definitions +\**************************************************************************/ +#define CCDC_PID 0x0 +#define CCDC_PCR 0x4 +#define CCDC_SYN_MODE 0x8 +#define CCDC_HD_VD_WID 0xc +#define CCDC_PIX_LINES 0x10 +#define CCDC_HORZ_INFO 0x14 +#define CCDC_VERT_START 0x18 +#define CCDC_VERT_LINES 0x1c +#define CCDC_CULLING 0x20 +#define CCDC_HSIZE_OFF 0x24 +#define CCDC_SDOFST 0x28 +#define CCDC_SDR_ADDR 0x2c +#define CCDC_CLAMP 0x30 +#define CCDC_DCSUB 0x34 +#define CCDC_COLPTN 0x38 +#define CCDC_BLKCMP 0x3c +#define CCDC_FPC 0x40 +#define CCDC_FPC_ADDR 0x44 +#define CCDC_VDINT 0x48 +#define CCDC_ALAW 0x4c +#define CCDC_REC656IF 0x50 +#define CCDC_CCDCFG 0x54 +#define CCDC_FMTCFG 0x58 +#define CCDC_FMT_HORZ 0x5c +#define CCDC_FMT_VERT 0x60 +#define CCDC_FMT_ADDR0 0x64 +#define CCDC_FMT_ADDR1 0x68 +#define CCDC_FMT_ADDR2 0x6c +#define CCDC_FMT_ADDR3 0x70 +#define CCDC_FMT_ADDR4 0x74 +#define CCDC_FMT_ADDR5 0x78 +#define CCDC_FMT_ADDR6 0x7c +#define CCDC_FMT_ADDR7 0x80 +#define CCDC_PRGEVEN_0 0x84 +#define CCDC_PRGEVEN_1 0x88 +#define CCDC_PRGODD_0 0x8c +#define CCDC_PRGODD_1 0x90 +#define CCDC_VP_OUT 0x94 + + +/*************************************************************** +* Define for various register bit mask and shifts for CCDC +****************************************************************/ +#define CCDC_FID_POL_MASK 1 +#define CCDC_FID_POL_SHIFT 4 +#define CCDC_HD_POL_MASK 1 +#define CCDC_HD_POL_SHIFT 3 +#define CCDC_VD_POL_MASK 1 +#define CCDC_VD_POL_SHIFT 2 +#define CCDC_HSIZE_OFF_MASK 0xffffffe0 +#define CCDC_32BYTE_ALIGN_VAL 31 +#define CCDC_FRM_FMT_MASK 0x1 +#define CCDC_FRM_FMT_SHIFT 7 +#define CCDC_DATA_SZ_MASK 7 +#define CCDC_DATA_SZ_SHIFT 8 +#define CCDC_PIX_FMT_MASK 3 +#define CCDC_PIX_FMT_SHIFT 12 +#define CCDC_VP2SDR_DISABLE 0xFFFBFFFF +#define CCDC_WEN_ENABLE (1 << 17) +#define CCDC_SDR2RSZ_DISABLE 0xFFF7FFFF +#define CCDC_VDHDEN_ENABLE (1 << 16) +#define CCDC_LPF_ENABLE (1 << 14) +#define CCDC_ALAW_ENABLE (1 << 3) +#define CCDC_ALAW_GAMA_WD_MASK 7 +#define CCDC_BLK_CLAMP_ENABLE (1 << 31) +#define CCDC_BLK_SGAIN_MASK 0x1F +#define CCDC_BLK_ST_PXL_MASK 0x7FFF +#define CCDC_BLK_ST_PXL_SHIFT 10 +#define CCDC_BLK_SAMPLE_LN_MASK 7 +#define CCDC_BLK_SAMPLE_LN_SHIFT 28 +#define CCDC_BLK_SAMPLE_LINE_MASK 7 +#define CCDC_BLK_SAMPLE_LINE_SHIFT 25 +#define CCDC_BLK_DC_SUB_MASK 0x03FFF +#define CCDC_BLK_COMP_MASK 0xFF +#define CCDC_BLK_COMP_GB_COMP_SHIFT 8 +#define CCDC_BLK_COMP_GR_COMP_SHIFT 16 +#define CCDC_BLK_COMP_R_COMP_SHIFT 24 +#define CCDC_LATCH_ON_VSYNC_DISABLE (1 << 15) +#define CCDC_FPC_ENABLE (1 << 15) +#define CCDC_FPC_DISABLE 0 +#define CCDC_FPC_FPC_NUM_MASK 0x7FFF +#define CCDC_DATA_PACK_ENABLE (1 << 11) +#define CCDC_FMTCFG_VPIN_MASK 7 +#define CCDC_FMTCFG_VPIN_SHIFT 12 +#define CCDC_FMT_HORZ_FMTLNH_MASK 0x1FFF +#define CCDC_FMT_HORZ_FMTSPH_MASK 0x1FFF +#define CCDC_FMT_HORZ_FMTSPH_SHIFT 16 +#define CCDC_FMT_VERT_FMTLNV_MASK 0x1FFF +#define CCDC_FMT_VERT_FMTSLV_MASK 0x1FFF +#define CCDC_FMT_VERT_FMTSLV_SHIFT 16 +#define CCDC_VP_OUT_VERT_NUM_MASK 0x3FFF +#define CCDC_VP_OUT_VERT_NUM_SHIFT 17 +#define CCDC_VP_OUT_HORZ_NUM_MASK 0x1FFF +#define CCDC_VP_OUT_HORZ_NUM_SHIFT 4 +#define CCDC_VP_OUT_HORZ_ST_MASK 0xF +#define CCDC_HORZ_INFO_SPH_SHIFT 16 +#define CCDC_VERT_START_SLV0_SHIFT 16 +#define CCDC_VDINT_VDINT0_SHIFT 16 +#define CCDC_VDINT_VDINT1_MASK 0xFFFF +#define CCDC_PPC_RAW 1 +#define CCDC_DCSUB_DEFAULT_VAL 0 +#define CCDC_CLAMP_DEFAULT_VAL 0 +#define CCDC_ENABLE_VIDEO_PORT 0x8000 +#define CCDC_DISABLE_VIDEO_PORT 0 +#define CCDC_COLPTN_VAL 0xBB11BB11 +#define CCDC_TWO_BYTES_PER_PIXEL 2 +#define CCDC_INTERLACED_IMAGE_INVERT 0x4B6D +#define CCDC_INTERLACED_NO_IMAGE_INVERT 0x0249 +#define CCDC_PROGRESSIVE_IMAGE_INVERT 0x4000 +#define CCDC_PROGRESSIVE_NO_IMAGE_INVERT 0 +#define CCDC_INTERLACED_HEIGHT_SHIFT 1 +#define CCDC_SYN_MODE_INPMOD_SHIFT 12 +#define CCDC_SYN_MODE_INPMOD_MASK 3 +#define CCDC_SYN_MODE_8BITS (7 << 8) +#define CCDC_SYN_FLDMODE_MASK 1 +#define CCDC_SYN_FLDMODE_SHIFT 7 +#define CCDC_REC656IF_BT656_EN 3 +#define CCDC_SYN_MODE_VD_POL_NEGATIVE (1 << 2) +#define CCDC_CCDCFG_Y8POS_SHIFT 11 +#define CCDC_SDOFST_FIELD_INTERLEAVED 0x249 +#define CCDC_NO_CULLING 0xffff00ff +#endif diff --git a/linux/drivers/media/video/davinci/vpfe_capture.c b/linux/drivers/media/video/davinci/vpfe_capture.c new file mode 100644 index 000000000..402ce43ef --- /dev/null +++ b/linux/drivers/media/video/davinci/vpfe_capture.c @@ -0,0 +1,2124 @@ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Driver name : VPFE Capture driver + * VPFE Capture driver allows applications to capture and stream video + * frames on DaVinci SoCs (DM6446, DM355 etc) from a YUV source such as + * TVP5146 or Raw Bayer RGB image data from an image sensor + * such as Microns' MT9T001, MT9T031 etc. + * + * These SoCs have, in common, a Video Processing Subsystem (VPSS) that + * consists of a Video Processing Front End (VPFE) for capturing + * video/raw image data and Video Processing Back End (VPBE) for displaying + * YUV data through an in-built analog encoder or Digital LCD port. This + * driver is for capture through VPFE. A typical EVM using these SoCs have + * following high level configuration. + * + * + * decoder(TVP5146/ YUV/ + * MT9T001) --> Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF) + * data input | | + * V | + * SDRAM | + * V + * Image Processor + * | + * V + * SDRAM + * The data flow happens from a decoder connected to the VPFE over a + * YUV embedded (BT.656/BT.1120) or separate sync or raw bayer rgb interface + * and to the input of VPFE through an optional MUX (if more inputs are + * to be interfaced on the EVM). The input data is first passed through + * CCDC (CCD Controller, a.k.a Image Sensor Interface, ISIF). The CCDC + * does very little or no processing on YUV data and does pre-process Raw + * Bayer RGB data through modules such as Defect Pixel Correction (DFC) + * Color Space Conversion (CSC), data gain/offset etc. After this, data + * can be written to SDRAM or can be connected to the image processing + * block such as IPIPE (on DM355 only). + * + * Features supported + * - MMAP IO + * - Capture using TVP5146 over BT.656 + * - support for interfacing decoders using sub device model + * - Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV + * data capture to SDRAM. + * TODO list + * - Support multiple REQBUF after open + * - Support for de-allocating buffers through REQBUF + * - Support for Raw Bayer RGB capture + * - Support for chaining Image Processor + * - Support for static allocation of buffers + * - Support for USERPTR IO + * - Support for STREAMON before QBUF + * - Support for control ioctls + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/version.h> +#include <media/v4l2-common.h> +#include <linux/io.h> +#include <media/davinci/vpfe_capture.h> +#include "ccdc_hw_device.h" + +static int debug; +static u32 numbuffers = 3; +static u32 bufsize = (720 * 576 * 2); + +module_param(numbuffers, uint, S_IRUGO); +module_param(bufsize, uint, S_IRUGO); +module_param(debug, int, 0644); + +MODULE_PARM_DESC(numbuffers, "buffer count (default:3)"); +MODULE_PARM_DESC(bufsize, "buffer size in bytes (default:720 x 576 x 2)"); +MODULE_PARM_DESC(debug, "Debug level 0-1"); + +MODULE_DESCRIPTION("VPFE Video for Linux Capture Driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments"); + +/* standard information */ +struct vpfe_standard { + v4l2_std_id std_id; + unsigned int width; + unsigned int height; + struct v4l2_fract pixelaspect; + /* 0 - progressive, 1 - interlaced */ + int frame_format; +}; + +/* ccdc configuration */ +struct ccdc_config { + /* This make sure vpfe is probed and ready to go */ + int vpfe_probed; + /* name of ccdc device */ + char name[32]; + /* for storing mem maps for CCDC */ + int ccdc_addr_size; + void *__iomem ccdc_addr; +}; + +/* data structures */ +static struct vpfe_config_params config_params = { + .min_numbuffers = 3, + .numbuffers = 3, + .min_bufsize = 720 * 480 * 2, + .device_bufsize = 720 * 576 * 2, +}; + +/* ccdc device registered */ +static struct ccdc_hw_device *ccdc_dev; +/* lock for accessing ccdc information */ +static DEFINE_MUTEX(ccdc_lock); +/* ccdc configuration */ +static struct ccdc_config *ccdc_cfg; + +const struct vpfe_standard vpfe_standards[] = { + {V4L2_STD_525_60, 720, 480, {11, 10}, 1}, + {V4L2_STD_625_50, 720, 576, {54, 59}, 1}, +}; + +/* Used when raw Bayer image from ccdc is directly captured to SDRAM */ +static const struct vpfe_pixel_format vpfe_pix_fmts[] = { + { + .fmtdesc = { + .index = 0, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "Bayer GrRBGb 8bit A-Law compr.", + .pixelformat = V4L2_PIX_FMT_SBGGR8, + }, + .bpp = 1, + }, + { + .fmtdesc = { + .index = 1, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "Bayer GrRBGb - 16bit", + .pixelformat = V4L2_PIX_FMT_SBGGR16, + }, + .bpp = 2, + }, + { + .fmtdesc = { + .index = 2, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "Bayer GrRBGb 8bit DPCM compr.", + .pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8, + }, + .bpp = 1, + }, + { + .fmtdesc = { + .index = 3, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "YCbCr 4:2:2 Interleaved UYVY", + .pixelformat = V4L2_PIX_FMT_UYVY, + }, + .bpp = 2, + }, + { + .fmtdesc = { + .index = 4, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "YCbCr 4:2:2 Interleaved YUYV", + .pixelformat = V4L2_PIX_FMT_YUYV, + }, + .bpp = 2, + }, + { + .fmtdesc = { + .index = 5, + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .description = "Y/CbCr 4:2:0 - Semi planar", + .pixelformat = V4L2_PIX_FMT_NV12, + }, + .bpp = 1, + }, +}; + +/* + * vpfe_lookup_pix_format() + * lookup an entry in the vpfe pix format table based on pix_format + */ +static const struct vpfe_pixel_format *vpfe_lookup_pix_format(u32 pix_format) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(vpfe_pix_fmts); i++) { + if (pix_format == vpfe_pix_fmts[i].fmtdesc.pixelformat) + return &vpfe_pix_fmts[i]; + } + return NULL; +} + +/* + * vpfe_register_ccdc_device. CCDC module calls this to + * register with vpfe capture + */ +int vpfe_register_ccdc_device(struct ccdc_hw_device *dev) +{ + int ret = 0; + printk(KERN_NOTICE "vpfe_register_ccdc_device: %s\n", dev->name); + + BUG_ON(!dev->hw_ops.open); + BUG_ON(!dev->hw_ops.enable); + BUG_ON(!dev->hw_ops.set_hw_if_params); + BUG_ON(!dev->hw_ops.configure); + BUG_ON(!dev->hw_ops.set_buftype); + BUG_ON(!dev->hw_ops.get_buftype); + BUG_ON(!dev->hw_ops.enum_pix); + BUG_ON(!dev->hw_ops.set_frame_format); + BUG_ON(!dev->hw_ops.get_frame_format); + BUG_ON(!dev->hw_ops.get_pixel_format); + BUG_ON(!dev->hw_ops.set_pixel_format); + BUG_ON(!dev->hw_ops.set_params); + BUG_ON(!dev->hw_ops.set_image_window); + BUG_ON(!dev->hw_ops.get_image_window); + BUG_ON(!dev->hw_ops.get_line_length); + BUG_ON(!dev->hw_ops.setfbaddr); + BUG_ON(!dev->hw_ops.getfid); + + mutex_lock(&ccdc_lock); + if (NULL == ccdc_cfg) { + /* + * TODO. Will this ever happen? if so, we need to fix it. + * Proabably we need to add the request to a linked list and + * walk through it during vpfe probe + */ + printk(KERN_ERR "vpfe capture not initialized\n"); + ret = -1; + goto unlock; + } + + if (strcmp(dev->name, ccdc_cfg->name)) { + /* ignore this ccdc */ + ret = -1; + goto unlock; + } + + if (ccdc_dev) { + printk(KERN_ERR "ccdc already registered\n"); + ret = -1; + goto unlock; + } + + ccdc_dev = dev; + dev->hw_ops.set_ccdc_base(ccdc_cfg->ccdc_addr, + ccdc_cfg->ccdc_addr_size); +unlock: + mutex_unlock(&ccdc_lock); + return ret; +} +EXPORT_SYMBOL(vpfe_register_ccdc_device); + +/* + * vpfe_unregister_ccdc_device. CCDC module calls this to + * unregister with vpfe capture + */ +void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev) +{ + if (NULL == dev) { + printk(KERN_ERR "invalid ccdc device ptr\n"); + return; + } + + printk(KERN_NOTICE "vpfe_unregister_ccdc_device, dev->name = %s\n", + dev->name); + + if (strcmp(dev->name, ccdc_cfg->name)) { + /* ignore this ccdc */ + return; + } + + mutex_lock(&ccdc_lock); + ccdc_dev = NULL; + mutex_unlock(&ccdc_lock); + return; +} +EXPORT_SYMBOL(vpfe_unregister_ccdc_device); + +/* + * vpfe_get_ccdc_image_format - Get image parameters based on CCDC settings + */ +static int vpfe_get_ccdc_image_format(struct vpfe_device *vpfe_dev, + struct v4l2_format *f) +{ + struct v4l2_rect image_win; + enum ccdc_buftype buf_type; + enum ccdc_frmfmt frm_fmt; + + memset(f, 0, sizeof(*f)); + f->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + ccdc_dev->hw_ops.get_image_window(&image_win); + f->fmt.pix.width = image_win.width; + f->fmt.pix.height = image_win.height; + f->fmt.pix.bytesperline = ccdc_dev->hw_ops.get_line_length(); + f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * + f->fmt.pix.height; + buf_type = ccdc_dev->hw_ops.get_buftype(); + f->fmt.pix.pixelformat = ccdc_dev->hw_ops.get_pixel_format(); + frm_fmt = ccdc_dev->hw_ops.get_frame_format(); + if (frm_fmt == CCDC_FRMFMT_PROGRESSIVE) + f->fmt.pix.field = V4L2_FIELD_NONE; + else if (frm_fmt == CCDC_FRMFMT_INTERLACED) { + if (buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) + f->fmt.pix.field = V4L2_FIELD_INTERLACED; + else if (buf_type == CCDC_BUFTYPE_FLD_SEPARATED) + f->fmt.pix.field = V4L2_FIELD_SEQ_TB; + else { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf_type\n"); + return -EINVAL; + } + } else { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid frm_fmt\n"); + return -EINVAL; + } + return 0; +} + +/* + * vpfe_config_ccdc_image_format() + * For a pix format, configure ccdc to setup the capture + */ +static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe_dev) +{ + enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED; + int ret = 0; + + if (ccdc_dev->hw_ops.set_pixel_format( + vpfe_dev->fmt.fmt.pix.pixelformat) < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, + "couldn't set pix format in ccdc\n"); + return -EINVAL; + } + /* configure the image window */ + ccdc_dev->hw_ops.set_image_window(&vpfe_dev->crop); + + switch (vpfe_dev->fmt.fmt.pix.field) { + case V4L2_FIELD_INTERLACED: + /* do nothing, since it is default */ + ret = ccdc_dev->hw_ops.set_buftype( + CCDC_BUFTYPE_FLD_INTERLEAVED); + break; + case V4L2_FIELD_NONE: + frm_fmt = CCDC_FRMFMT_PROGRESSIVE; + /* buffer type only applicable for interlaced scan */ + break; + case V4L2_FIELD_SEQ_TB: + ret = ccdc_dev->hw_ops.set_buftype( + CCDC_BUFTYPE_FLD_SEPARATED); + break; + default: + return -EINVAL; + } + + /* set the frame format */ + if (!ret) + ret = ccdc_dev->hw_ops.set_frame_format(frm_fmt); + return ret; +} +/* + * vpfe_config_image_format() + * For a given standard, this functions sets up the default + * pix format & crop values in the vpfe device and ccdc. It first + * starts with defaults based values from the standard table. + * It then checks if sub device support g_fmt and then override the + * values based on that.Sets crop values to match with scan resolution + * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the + * values in ccdc + */ +static int vpfe_config_image_format(struct vpfe_device *vpfe_dev, + const v4l2_std_id *std_id) +{ + struct vpfe_subdev_info *sdinfo = vpfe_dev->current_subdev; + int i, ret = 0; + + for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) { + if (vpfe_standards[i].std_id & *std_id) { + vpfe_dev->std_info.active_pixels = + vpfe_standards[i].width; + vpfe_dev->std_info.active_lines = + vpfe_standards[i].height; + vpfe_dev->std_info.frame_format = + vpfe_standards[i].frame_format; + vpfe_dev->std_index = i; + break; + } + } + + if (i == ARRAY_SIZE(vpfe_standards)) { + v4l2_err(&vpfe_dev->v4l2_dev, "standard not supported\n"); + return -EINVAL; + } + + vpfe_dev->crop.top = 0; + vpfe_dev->crop.left = 0; + vpfe_dev->crop.width = vpfe_dev->std_info.active_pixels; + vpfe_dev->crop.height = vpfe_dev->std_info.active_lines; + vpfe_dev->fmt.fmt.pix.width = vpfe_dev->crop.width; + vpfe_dev->fmt.fmt.pix.height = vpfe_dev->crop.height; + + /* first field and frame format based on standard frame format */ + if (vpfe_dev->std_info.frame_format) { + vpfe_dev->fmt.fmt.pix.field = V4L2_FIELD_INTERLACED; + /* assume V4L2_PIX_FMT_UYVY as default */ + vpfe_dev->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY; + } else { + vpfe_dev->fmt.fmt.pix.field = V4L2_FIELD_NONE; + /* assume V4L2_PIX_FMT_SBGGR8 */ + vpfe_dev->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_SBGGR8; + } + + /* if sub device supports g_fmt, override the defaults */ + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, + sdinfo->grp_id, video, g_fmt, &vpfe_dev->fmt); + + if (ret && ret != -ENOIOCTLCMD) { + v4l2_err(&vpfe_dev->v4l2_dev, + "error in getting g_fmt from sub device\n"); + return ret; + } + + /* Sets the values in CCDC */ + ret = vpfe_config_ccdc_image_format(vpfe_dev); + if (ret) + return ret; + + /* Update the values of sizeimage and bytesperline */ + if (!ret) { + vpfe_dev->fmt.fmt.pix.bytesperline = + ccdc_dev->hw_ops.get_line_length(); + vpfe_dev->fmt.fmt.pix.sizeimage = + vpfe_dev->fmt.fmt.pix.bytesperline * + vpfe_dev->fmt.fmt.pix.height; + } + return ret; +} + +static int vpfe_initialize_device(struct vpfe_device *vpfe_dev) +{ + int ret = 0; + + /* set first input of current subdevice as the current input */ + vpfe_dev->current_input = 0; + + /* set default standard */ + vpfe_dev->std_index = 0; + + /* Configure the default format information */ + ret = vpfe_config_image_format(vpfe_dev, + &vpfe_standards[vpfe_dev->std_index].std_id); + if (ret) + return ret; + + /* now open the ccdc device to initialize it */ + mutex_lock(&ccdc_lock); + if (NULL == ccdc_dev) { + v4l2_err(&vpfe_dev->v4l2_dev, "ccdc device not registered\n"); + ret = -ENODEV; + goto unlock; + } + + if (!try_module_get(ccdc_dev->owner)) { + v4l2_err(&vpfe_dev->v4l2_dev, "Couldn't lock ccdc module\n"); + ret = -ENODEV; + goto unlock; + } + ret = ccdc_dev->hw_ops.open(vpfe_dev->pdev); + if (!ret) + vpfe_dev->initialized = 1; +unlock: + mutex_unlock(&ccdc_lock); + return ret; +} + +/* + * vpfe_open : It creates object of file handle structure and + * stores it in private_data member of filepointer + */ +static int vpfe_open(struct file *file) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_open\n"); + + if (!vpfe_dev->cfg->num_subdevs) { + v4l2_err(&vpfe_dev->v4l2_dev, "No decoder registered\n"); + return -ENODEV; + } + + /* Allocate memory for the file handle object */ + fh = kmalloc(sizeof(struct vpfe_fh), GFP_KERNEL); + if (NULL == fh) { + v4l2_err(&vpfe_dev->v4l2_dev, + "unable to allocate memory for file handle object\n"); + return -ENOMEM; + } + /* store pointer to fh in private_data member of file */ + file->private_data = fh; + fh->vpfe_dev = vpfe_dev; + mutex_lock(&vpfe_dev->lock); + /* If decoder is not initialized. initialize it */ + if (!vpfe_dev->initialized) { + if (vpfe_initialize_device(vpfe_dev)) { + mutex_unlock(&vpfe_dev->lock); + return -ENODEV; + } + } + /* Increment device usrs counter */ + vpfe_dev->usrs++; + /* Set io_allowed member to false */ + fh->io_allowed = 0; + /* Initialize priority of this instance to default priority */ + fh->prio = V4L2_PRIORITY_UNSET; + v4l2_prio_open(&vpfe_dev->prio, &fh->prio); + mutex_unlock(&vpfe_dev->lock); + return 0; +} + +static void vpfe_schedule_next_buffer(struct vpfe_device *vpfe_dev) +{ + unsigned long addr; + + vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next, + struct videobuf_buffer, queue); + list_del(&vpfe_dev->next_frm->queue); + vpfe_dev->next_frm->state = VIDEOBUF_ACTIVE; + addr = videobuf_to_dma_contig(vpfe_dev->next_frm); + ccdc_dev->hw_ops.setfbaddr(addr); +} + +static void vpfe_process_buffer_complete(struct vpfe_device *vpfe_dev) +{ + struct timeval timevalue; + + do_gettimeofday(&timevalue); + vpfe_dev->cur_frm->ts = timevalue; + vpfe_dev->cur_frm->state = VIDEOBUF_DONE; + vpfe_dev->cur_frm->size = vpfe_dev->fmt.fmt.pix.sizeimage; + wake_up_interruptible(&vpfe_dev->cur_frm->done); + vpfe_dev->cur_frm = vpfe_dev->next_frm; +} + +/* ISR for VINT0*/ +static irqreturn_t vpfe_isr(int irq, void *dev_id) +{ + struct vpfe_device *vpfe_dev = dev_id; + enum v4l2_field field; + unsigned long addr; + int fid; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nStarting vpfe_isr...\n"); + field = vpfe_dev->fmt.fmt.pix.field; + + /* if streaming not started, don't do anything */ + if (!vpfe_dev->started) + return IRQ_HANDLED; + + /* only for 6446 this will be applicable */ + if (NULL != ccdc_dev->hw_ops.reset) + ccdc_dev->hw_ops.reset(); + + if (field == V4L2_FIELD_NONE) { + /* handle progressive frame capture */ + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "frame format is progressive...\n"); + if (vpfe_dev->cur_frm != vpfe_dev->next_frm) + vpfe_process_buffer_complete(vpfe_dev); + return IRQ_HANDLED; + } + + /* interlaced or TB capture check which field we are in hardware */ + fid = ccdc_dev->hw_ops.getfid(); + + /* switch the software maintained field id */ + vpfe_dev->field_id ^= 1; + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "field id = %x:%x.\n", + fid, vpfe_dev->field_id); + if (fid == vpfe_dev->field_id) { + /* we are in-sync here,continue */ + if (fid == 0) { + /* + * One frame is just being captured. If the next frame + * is available, release the current frame and move on + */ + if (vpfe_dev->cur_frm != vpfe_dev->next_frm) + vpfe_process_buffer_complete(vpfe_dev); + /* + * based on whether the two fields are stored + * interleavely or separately in memory, reconfigure + * the CCDC memory address + */ + if (field == V4L2_FIELD_SEQ_TB) { + addr = + videobuf_to_dma_contig(vpfe_dev->cur_frm); + addr += vpfe_dev->field_off; + ccdc_dev->hw_ops.setfbaddr(addr); + } + return IRQ_HANDLED; + } + /* + * if one field is just being captured configure + * the next frame get the next frame from the empty + * queue if no frame is available hold on to the + * current buffer + */ + spin_lock(&vpfe_dev->dma_queue_lock); + if (!list_empty(&vpfe_dev->dma_queue) && + vpfe_dev->cur_frm == vpfe_dev->next_frm) + vpfe_schedule_next_buffer(vpfe_dev); + spin_unlock(&vpfe_dev->dma_queue_lock); + } else if (fid == 0) { + /* + * out of sync. Recover from any hardware out-of-sync. + * May loose one frame + */ + vpfe_dev->field_id = fid; + } + return IRQ_HANDLED; +} + +/* vdint1_isr - isr handler for VINT1 interrupt */ +static irqreturn_t vdint1_isr(int irq, void *dev_id) +{ + struct vpfe_device *vpfe_dev = dev_id; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nInside vdint1_isr...\n"); + + /* if streaming not started, don't do anything */ + if (!vpfe_dev->started) + return IRQ_HANDLED; + + spin_lock(&vpfe_dev->dma_queue_lock); + if ((vpfe_dev->fmt.fmt.pix.field == V4L2_FIELD_NONE) && + !list_empty(&vpfe_dev->dma_queue) && + vpfe_dev->cur_frm == vpfe_dev->next_frm) + vpfe_schedule_next_buffer(vpfe_dev); + spin_unlock(&vpfe_dev->dma_queue_lock); + return IRQ_HANDLED; +} + +static void vpfe_detach_irq(struct vpfe_device *vpfe_dev) +{ + enum ccdc_frmfmt frame_format; + + frame_format = ccdc_dev->hw_ops.get_frame_format(); + if (frame_format == CCDC_FRMFMT_PROGRESSIVE) + free_irq(IRQ_VDINT1, vpfe_dev); +} + +static int vpfe_attach_irq(struct vpfe_device *vpfe_dev) +{ + enum ccdc_frmfmt frame_format; + + frame_format = ccdc_dev->hw_ops.get_frame_format(); + if (frame_format == CCDC_FRMFMT_PROGRESSIVE) { + return request_irq(vpfe_dev->ccdc_irq1, vdint1_isr, + IRQF_DISABLED, "vpfe_capture1", + vpfe_dev); + } + return 0; +} + +/* vpfe_stop_ccdc_capture: stop streaming in ccdc/isif */ +static void vpfe_stop_ccdc_capture(struct vpfe_device *vpfe_dev) +{ + vpfe_dev->started = 0; + ccdc_dev->hw_ops.enable(0); + if (ccdc_dev->hw_ops.enable_out_to_sdram) + ccdc_dev->hw_ops.enable_out_to_sdram(0); +} + +/* + * vpfe_release : This function deletes buffer queue, frees the + * buffers and the vpfe file handle + */ +static int vpfe_release(struct file *file) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + struct vpfe_subdev_info *sdinfo; + int ret; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_release\n"); + + /* Get the device lock */ + mutex_lock(&vpfe_dev->lock); + /* if this instance is doing IO */ + if (fh->io_allowed) { + if (vpfe_dev->started) { + sdinfo = vpfe_dev->current_subdev; + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, + sdinfo->grp_id, + video, s_stream, 0); + if (ret && (ret != -ENOIOCTLCMD)) + v4l2_err(&vpfe_dev->v4l2_dev, + "stream off failed in subdev\n"); + vpfe_stop_ccdc_capture(vpfe_dev); + vpfe_detach_irq(vpfe_dev); + videobuf_streamoff(&vpfe_dev->buffer_queue); + } + vpfe_dev->io_usrs = 0; + vpfe_dev->numbuffers = config_params.numbuffers; + } + + /* Decrement device usrs counter */ + vpfe_dev->usrs--; + /* Close the priority */ + v4l2_prio_close(&vpfe_dev->prio, &fh->prio); + /* If this is the last file handle */ + if (!vpfe_dev->usrs) { + vpfe_dev->initialized = 0; + if (ccdc_dev->hw_ops.close) + ccdc_dev->hw_ops.close(vpfe_dev->pdev); + module_put(ccdc_dev->owner); + } + mutex_unlock(&vpfe_dev->lock); + file->private_data = NULL; + /* Free memory allocated to file handle object */ + kfree(fh); + return 0; +} + +/* + * vpfe_mmap : It is used to map kernel space buffers + * into user spaces + */ +static int vpfe_mmap(struct file *file, struct vm_area_struct *vma) +{ + /* Get the device object and file handle object */ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_mmap\n"); + + return videobuf_mmap_mapper(&vpfe_dev->buffer_queue, vma); +} + +/* + * vpfe_poll: It is used for select/poll system call + */ +static unsigned int vpfe_poll(struct file *file, poll_table *wait) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_poll\n"); + + if (vpfe_dev->started) + return videobuf_poll_stream(file, + &vpfe_dev->buffer_queue, wait); + return 0; +} + +/* vpfe capture driver file operations */ +static const struct v4l2_file_operations vpfe_fops = { + .owner = THIS_MODULE, + .open = vpfe_open, + .release = vpfe_release, + .unlocked_ioctl = video_ioctl2, + .mmap = vpfe_mmap, + .poll = vpfe_poll +}; + +/* + * vpfe_check_format() + * This function adjust the input pixel format as per hardware + * capabilities and update the same in pixfmt. + * Following algorithm used :- + * + * If given pixformat is not in the vpfe list of pix formats or not + * supported by the hardware, current value of pixformat in the device + * is used + * If given field is not supported, then current field is used. If field + * is different from current, then it is matched with that from sub device. + * Minimum height is 2 lines for interlaced or tb field and 1 line for + * progressive. Maximum height is clamped to active active lines of scan + * Minimum width is 32 bytes in memory and width is clamped to active + * pixels of scan. + * bytesperline is a multiple of 32. + */ +static const struct vpfe_pixel_format * + vpfe_check_format(struct vpfe_device *vpfe_dev, + struct v4l2_pix_format *pixfmt) +{ + u32 min_height = 1, min_width = 32, max_width, max_height; + const struct vpfe_pixel_format *vpfe_pix_fmt; + u32 pix; + int temp, found; + + vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); + if (NULL == vpfe_pix_fmt) { + /* + * use current pixel format in the vpfe device. We + * will find this pix format in the table + */ + pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat; + vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); + } + + /* check if hw supports it */ + temp = 0; + found = 0; + while (ccdc_dev->hw_ops.enum_pix(&pix, temp) >= 0) { + if (vpfe_pix_fmt->fmtdesc.pixelformat == pix) { + found = 1; + break; + } + temp++; + } + + if (!found) { + /* use current pixel format */ + pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat; + /* + * Since this is currently used in the vpfe device, we + * will find this pix format in the table + */ + vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); + } + + /* check what field format is supported */ + if (pixfmt->field == V4L2_FIELD_ANY) { + /* if field is any, use current value as default */ + pixfmt->field = vpfe_dev->fmt.fmt.pix.field; + } + + /* + * if field is not same as current field in the vpfe device + * try matching the field with the sub device field + */ + if (vpfe_dev->fmt.fmt.pix.field != pixfmt->field) { + /* + * If field value is not in the supported fields, use current + * field used in the device as default + */ + switch (pixfmt->field) { + case V4L2_FIELD_INTERLACED: + case V4L2_FIELD_SEQ_TB: + /* if sub device is supporting progressive, use that */ + if (!vpfe_dev->std_info.frame_format) + pixfmt->field = V4L2_FIELD_NONE; + break; + case V4L2_FIELD_NONE: + if (vpfe_dev->std_info.frame_format) + pixfmt->field = V4L2_FIELD_INTERLACED; + break; + + default: + /* use current field as default */ + pixfmt->field = vpfe_dev->fmt.fmt.pix.field; + break; + } + } + + /* Now adjust image resolutions supported */ + if (pixfmt->field == V4L2_FIELD_INTERLACED || + pixfmt->field == V4L2_FIELD_SEQ_TB) + min_height = 2; + + max_width = vpfe_dev->std_info.active_pixels; + max_height = vpfe_dev->std_info.active_lines; + min_width /= vpfe_pix_fmt->bpp; + + v4l2_info(&vpfe_dev->v4l2_dev, "width = %d, height = %d, bpp = %d\n", + pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp); + + pixfmt->width = clamp((pixfmt->width), min_width, max_width); + pixfmt->height = clamp((pixfmt->height), min_height, max_height); + + /* If interlaced, adjust height to be a multiple of 2 */ + if (pixfmt->field == V4L2_FIELD_INTERLACED) + pixfmt->height &= (~1); + /* + * recalculate bytesperline and sizeimage since width + * and height might have changed + */ + pixfmt->bytesperline = (((pixfmt->width * vpfe_pix_fmt->bpp) + 31) + & ~31); + if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) + pixfmt->sizeimage = + pixfmt->bytesperline * pixfmt->height + + ((pixfmt->bytesperline * pixfmt->height) >> 1); + else + pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; + + v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height =" + " %d, bpp = %d, bytesperline = %d, sizeimage = %d\n", + pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp, + pixfmt->bytesperline, pixfmt->sizeimage); + return vpfe_pix_fmt; +} + +static int vpfe_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querycap\n"); + + cap->version = VPFE_CAPTURE_VERSION_CODE; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + strlcpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver)); + strlcpy(cap->bus_info, "VPFE", sizeof(cap->bus_info)); + strlcpy(cap->card, vpfe_dev->cfg->card_name, sizeof(cap->card)); + return 0; +} + +static int vpfe_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_fmt_vid_cap\n"); + /* Fill in the information about format */ + *fmt = vpfe_dev->fmt; + return ret; +} + +static int vpfe_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *fmt) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + const struct vpfe_pixel_format *pix_fmt; + int temp_index; + u32 pix; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt_vid_cap\n"); + + if (ccdc_dev->hw_ops.enum_pix(&pix, fmt->index) < 0) + return -EINVAL; + + /* Fill in the information about format */ + pix_fmt = vpfe_lookup_pix_format(pix); + if (NULL != pix_fmt) { + temp_index = fmt->index; + *fmt = pix_fmt->fmtdesc; + fmt->index = temp_index; + return 0; + } + return -EINVAL; +} + +static int vpfe_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + const struct vpfe_pixel_format *pix_fmts; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt_vid_cap\n"); + + /* If streaming is started, return error */ + if (vpfe_dev->started) { + v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is started\n"); + return -EBUSY; + } + + /* Check for valid frame format */ + pix_fmts = vpfe_check_format(vpfe_dev, &fmt->fmt.pix); + + if (NULL == pix_fmts) + return -EINVAL; + + /* store the pixel format in the device object */ + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + /* First detach any IRQ if currently attached */ + vpfe_detach_irq(vpfe_dev); + vpfe_dev->fmt = *fmt; + /* set image capture parameters in the ccdc */ + ret = vpfe_config_ccdc_image_format(vpfe_dev); + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + const struct vpfe_pixel_format *pix_fmts; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt_vid_cap\n"); + + pix_fmts = vpfe_check_format(vpfe_dev, &f->fmt.pix); + if (NULL == pix_fmts) + return -EINVAL; + return 0; +} + +/* + * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a + * given app input index + */ +static int vpfe_get_subdev_input_index(struct vpfe_device *vpfe_dev, + int *subdev_index, + int *subdev_input_index, + int app_input_index) +{ + struct vpfe_config *cfg = vpfe_dev->cfg; + struct vpfe_subdev_info *sdinfo; + int i, j = 0; + + for (i = 0; i < cfg->num_subdevs; i++) { + sdinfo = &cfg->sub_devs[i]; + if (app_input_index < (j + sdinfo->num_inputs)) { + *subdev_index = i; + *subdev_input_index = app_input_index - j; + return 0; + } + j += sdinfo->num_inputs; + } + return -EINVAL; +} + +/* + * vpfe_get_app_input - Get app input index for a given subdev input index + * driver stores the input index of the current sub device and translate it + * when application request the current input + */ +static int vpfe_get_app_input_index(struct vpfe_device *vpfe_dev, + int *app_input_index) +{ + struct vpfe_config *cfg = vpfe_dev->cfg; + struct vpfe_subdev_info *sdinfo; + int i, j = 0; + + for (i = 0; i < cfg->num_subdevs; i++) { + sdinfo = &cfg->sub_devs[i]; + if (!strcmp(sdinfo->name, vpfe_dev->current_subdev->name)) { + if (vpfe_dev->current_input >= sdinfo->num_inputs) + return -1; + *app_input_index = j + vpfe_dev->current_input; + return 0; + } + j += sdinfo->num_inputs; + } + return -EINVAL; +} + +static int vpfe_enum_input(struct file *file, void *priv, + struct v4l2_input *inp) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + int subdev, index ; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_input\n"); + + if (vpfe_get_subdev_input_index(vpfe_dev, + &subdev, + &index, + inp->index) < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, "input information not found" + " for the subdev\n"); + return -EINVAL; + } + sdinfo = &vpfe_dev->cfg->sub_devs[subdev]; + memcpy(inp, &sdinfo->inputs[index], sizeof(struct v4l2_input)); + return 0; +} + +static int vpfe_g_input(struct file *file, void *priv, unsigned int *index) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_input\n"); + + return vpfe_get_app_input_index(vpfe_dev, index); +} + + +static int vpfe_s_input(struct file *file, void *priv, unsigned int index) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + int subdev_index, inp_index; + struct vpfe_route *route; + u32 input = 0, output = 0; + int ret = -EINVAL; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n"); + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + /* + * If streaming is started return device busy + * error + */ + if (vpfe_dev->started) { + v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is on\n"); + ret = -EBUSY; + goto unlock_out; + } + + if (vpfe_get_subdev_input_index(vpfe_dev, + &subdev_index, + &inp_index, + index) < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, "invalid input index\n"); + goto unlock_out; + } + + sdinfo = &vpfe_dev->cfg->sub_devs[subdev_index]; + route = &sdinfo->routes[inp_index]; + if (route && sdinfo->can_route) { + input = route->input; + output = route->output; + } + + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + video, s_routing, input, output, 0); + + if (ret) { + v4l2_err(&vpfe_dev->v4l2_dev, + "vpfe_doioctl:error in setting input in decoder\n"); + ret = -EINVAL; + goto unlock_out; + } + vpfe_dev->current_subdev = sdinfo; + vpfe_dev->current_input = index; + vpfe_dev->std_index = 0; + + /* set the bus/interface parameter for the sub device in ccdc */ + ret = ccdc_dev->hw_ops.set_hw_if_params(&sdinfo->ccdc_if_params); + if (ret) + goto unlock_out; + + /* set the default image parameters in the device */ + ret = vpfe_config_image_format(vpfe_dev, + &vpfe_standards[vpfe_dev->std_index].std_id); +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querystd\n"); + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + sdinfo = vpfe_dev->current_subdev; + if (ret) + return ret; + /* Call querystd function of decoder device */ + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + video, querystd, std_id); + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_subdev_info *sdinfo; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n"); + + /* Call decoder driver function to set the standard */ + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + sdinfo = vpfe_dev->current_subdev; + /* If streaming is started, return device busy error */ + if (vpfe_dev->started) { + v4l2_err(&vpfe_dev->v4l2_dev, "streaming is started\n"); + ret = -EBUSY; + goto unlock_out; + } + + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + core, s_std, *std_id); + if (ret < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n"); + goto unlock_out; + } + ret = vpfe_config_image_format(vpfe_dev, std_id); + +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_std\n"); + + *std_id = vpfe_standards[vpfe_dev->std_index].std_id; + return 0; +} +/* + * Videobuf operations + */ +static int vpfe_videobuf_setup(struct videobuf_queue *vq, + unsigned int *count, + unsigned int *size) +{ + struct vpfe_fh *fh = vq->priv_data; + struct vpfe_device *vpfe_dev = fh->vpfe_dev; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_setup\n"); + *size = config_params.device_bufsize; + + if (*count < config_params.min_numbuffers) + *count = config_params.min_numbuffers; + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "count=%d, size=%d\n", *count, *size); + return 0; +} + +static int vpfe_videobuf_prepare(struct videobuf_queue *vq, + struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct vpfe_fh *fh = vq->priv_data; + struct vpfe_device *vpfe_dev = fh->vpfe_dev; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_prepare\n"); + + /* If buffer is not initialized, initialize it */ + if (VIDEOBUF_NEEDS_INIT == vb->state) { + vb->width = vpfe_dev->fmt.fmt.pix.width; + vb->height = vpfe_dev->fmt.fmt.pix.height; + vb->size = vpfe_dev->fmt.fmt.pix.sizeimage; + vb->field = field; + } + vb->state = VIDEOBUF_PREPARED; + return 0; +} + +static void vpfe_videobuf_queue(struct videobuf_queue *vq, + struct videobuf_buffer *vb) +{ + /* Get the file handle object and device object */ + struct vpfe_fh *fh = vq->priv_data; + struct vpfe_device *vpfe_dev = fh->vpfe_dev; + unsigned long flags; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_queue\n"); + + /* add the buffer to the DMA queue */ + spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags); + list_add_tail(&vb->queue, &vpfe_dev->dma_queue); + spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags); + + /* Change state of the buffer */ + vb->state = VIDEOBUF_QUEUED; +} + +static void vpfe_videobuf_release(struct videobuf_queue *vq, + struct videobuf_buffer *vb) +{ + struct vpfe_fh *fh = vq->priv_data; + struct vpfe_device *vpfe_dev = fh->vpfe_dev; + unsigned long flags; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_videobuf_release\n"); + + /* + * We need to flush the buffer from the dma queue since + * they are de-allocated + */ + spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags); + INIT_LIST_HEAD(&vpfe_dev->dma_queue); + spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags); + videobuf_dma_contig_free(vq, vb); + vb->state = VIDEOBUF_NEEDS_INIT; +} + +static struct videobuf_queue_ops vpfe_videobuf_qops = { + .buf_setup = vpfe_videobuf_setup, + .buf_prepare = vpfe_videobuf_prepare, + .buf_queue = vpfe_videobuf_queue, + .buf_release = vpfe_videobuf_release, +}; + +/* + * vpfe_reqbufs. currently support REQBUF only once opening + * the device. + */ +static int vpfe_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *req_buf) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != req_buf->type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + + if (V4L2_MEMORY_USERPTR == req_buf->memory) { + /* we don't support user ptr IO */ + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs:" + " USERPTR IO not supported\n"); + return -EINVAL; + } + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + if (vpfe_dev->io_usrs != 0) { + v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n"); + ret = -EBUSY; + goto unlock_out; + } + + vpfe_dev->memory = req_buf->memory; + videobuf_queue_dma_contig_init(&vpfe_dev->buffer_queue, + &vpfe_videobuf_qops, + NULL, + &vpfe_dev->irqlock, + req_buf->type, + vpfe_dev->fmt.fmt.pix.field, + sizeof(struct videobuf_buffer), + fh); + + fh->io_allowed = 1; + vpfe_dev->io_usrs = 1; + INIT_LIST_HEAD(&vpfe_dev->dma_queue); + ret = videobuf_reqbufs(&vpfe_dev->buffer_queue, req_buf); +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querybuf\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + if (vpfe_dev->memory != V4L2_MEMORY_MMAP) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid memory\n"); + return -EINVAL; + } + /* Call videobuf_querybuf to get information */ + return videobuf_querybuf(&vpfe_dev->buffer_queue, buf); +} + +static int vpfe_qbuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_qbuf\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != p->type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + /* + * If this file handle is not allowed to do IO, + * return error + */ + if (!fh->io_allowed) { + v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); + return -EACCES; + } + return videobuf_qbuf(&vpfe_dev->buffer_queue, p); +} + +static int vpfe_dqbuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_dqbuf\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + return videobuf_dqbuf(&vpfe_dev->buffer_queue, + buf, file->f_flags & O_NONBLOCK); +} + +/* + * vpfe_calculate_offsets : This function calculates buffers offset + * for top and bottom field + */ +static void vpfe_calculate_offsets(struct vpfe_device *vpfe_dev) +{ + struct v4l2_rect image_win; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_calculate_offsets\n"); + + ccdc_dev->hw_ops.get_image_window(&image_win); + vpfe_dev->field_off = image_win.height * image_win.width; +} + +/* vpfe_start_ccdc_capture: start streaming in ccdc/isif */ +static void vpfe_start_ccdc_capture(struct vpfe_device *vpfe_dev) +{ + ccdc_dev->hw_ops.enable(1); + if (ccdc_dev->hw_ops.enable_out_to_sdram) + ccdc_dev->hw_ops.enable_out_to_sdram(1); + vpfe_dev->started = 1; +} + +/* + * vpfe_streamon. Assume the DMA queue is not empty. + * application is expected to call QBUF before calling + * this ioctl. If not, driver returns error + */ +static int vpfe_streamon(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + struct vpfe_subdev_info *sdinfo; + unsigned long addr; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamon\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + /* If file handle is not allowed IO, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); + return -EACCES; + } + + sdinfo = vpfe_dev->current_subdev; + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + video, s_stream, 1); + + if (ret && (ret != -ENOIOCTLCMD)) { + v4l2_err(&vpfe_dev->v4l2_dev, "stream on failed in subdev\n"); + return -EINVAL; + } + + /* If buffer queue is empty, return error */ + if (list_empty(&vpfe_dev->buffer_queue.stream)) { + v4l2_err(&vpfe_dev->v4l2_dev, "buffer queue is empty\n"); + return -EIO; + } + + /* Call videobuf_streamon to start streaming * in videobuf */ + ret = videobuf_streamon(&vpfe_dev->buffer_queue); + if (ret) + return ret; + + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + goto streamoff; + /* Get the next frame from the buffer queue */ + vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next, + struct videobuf_buffer, queue); + vpfe_dev->cur_frm = vpfe_dev->next_frm; + /* Remove buffer from the buffer queue */ + list_del(&vpfe_dev->cur_frm->queue); + /* Mark state of the current frame to active */ + vpfe_dev->cur_frm->state = VIDEOBUF_ACTIVE; + /* Initialize field_id and started member */ + vpfe_dev->field_id = 0; + addr = videobuf_to_dma_contig(vpfe_dev->cur_frm); + + /* Calculate field offset */ + vpfe_calculate_offsets(vpfe_dev); + + if (vpfe_attach_irq(vpfe_dev) < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, + "Error in attaching interrupt handle\n"); + ret = -EFAULT; + goto unlock_out; + } + if (ccdc_dev->hw_ops.configure() < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, + "Error in configuring ccdc\n"); + ret = -EINVAL; + goto unlock_out; + } + ccdc_dev->hw_ops.setfbaddr((unsigned long)(addr)); + vpfe_start_ccdc_capture(vpfe_dev); + mutex_unlock(&vpfe_dev->lock); + return ret; +unlock_out: + mutex_unlock(&vpfe_dev->lock); +streamoff: + ret = videobuf_streamoff(&vpfe_dev->buffer_queue); + return ret; +} + +static int vpfe_streamoff(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + struct vpfe_fh *fh = file->private_data; + struct vpfe_subdev_info *sdinfo; + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamoff\n"); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) { + v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + /* If io is allowed for this file handle, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n"); + return -EACCES; + } + + /* If streaming is not started, return error */ + if (!vpfe_dev->started) { + v4l2_err(&vpfe_dev->v4l2_dev, "device started\n"); + return -EINVAL; + } + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + vpfe_stop_ccdc_capture(vpfe_dev); + vpfe_detach_irq(vpfe_dev); + + sdinfo = vpfe_dev->current_subdev; + ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id, + video, s_stream, 0); + + if (ret && (ret != -ENOIOCTLCMD)) + v4l2_err(&vpfe_dev->v4l2_dev, "stream off failed in subdev\n"); + ret = videobuf_streamoff(&vpfe_dev->buffer_queue); + mutex_unlock(&vpfe_dev->lock); + return ret; +} + +static int vpfe_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *crop) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_cropcap\n"); + + if (vpfe_dev->std_index > ARRAY_SIZE(vpfe_standards)) + return -EINVAL; + + memset(crop, 0, sizeof(struct v4l2_cropcap)); + crop->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + crop->bounds.width = crop->defrect.width = + vpfe_standards[vpfe_dev->std_index].width; + crop->bounds.height = crop->defrect.height = + vpfe_standards[vpfe_dev->std_index].height; + crop->pixelaspect = vpfe_standards[vpfe_dev->std_index].pixelaspect; + return 0; +} + +static int vpfe_g_crop(struct file *file, void *priv, + struct v4l2_crop *crop) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_crop\n"); + + crop->c = vpfe_dev->crop; + return 0; +} + +static int vpfe_s_crop(struct file *file, void *priv, + struct v4l2_crop *crop) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_crop\n"); + + if (vpfe_dev->started) { + /* make sure streaming is not started */ + v4l2_err(&vpfe_dev->v4l2_dev, + "Cannot change crop when streaming is ON\n"); + return -EBUSY; + } + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + if (crop->c.top < 0 || crop->c.left < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, + "doesn't support negative values for top & left\n"); + ret = -EINVAL; + goto unlock_out; + } + + /* adjust the width to 16 pixel boundry */ + crop->c.width = ((crop->c.width + 15) & ~0xf); + + /* make sure parameters are valid */ + if ((crop->c.left + crop->c.width > + vpfe_dev->std_info.active_pixels) || + (crop->c.top + crop->c.height > + vpfe_dev->std_info.active_lines)) { + v4l2_err(&vpfe_dev->v4l2_dev, "Error in S_CROP params\n"); + ret = -EINVAL; + goto unlock_out; + } + ccdc_dev->hw_ops.set_image_window(&crop->c); + vpfe_dev->fmt.fmt.pix.width = crop->c.width; + vpfe_dev->fmt.fmt.pix.height = crop->c.height; + vpfe_dev->fmt.fmt.pix.bytesperline = + ccdc_dev->hw_ops.get_line_length(); + vpfe_dev->fmt.fmt.pix.sizeimage = + vpfe_dev->fmt.fmt.pix.bytesperline * + vpfe_dev->fmt.fmt.pix.height; + vpfe_dev->crop = crop->c; +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + + +static long vpfe_param_handler(struct file *file, void *priv, + int cmd, void *param) +{ + struct vpfe_device *vpfe_dev = video_drvdata(file); + int ret = 0; + + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_param_handler\n"); + + if (vpfe_dev->started) { + /* only allowed if streaming is not started */ + v4l2_err(&vpfe_dev->v4l2_dev, "device already started\n"); + return -EBUSY; + } + + ret = mutex_lock_interruptible(&vpfe_dev->lock); + if (ret) + return ret; + + switch (cmd) { + case VPFE_CMD_S_CCDC_RAW_PARAMS: + v4l2_warn(&vpfe_dev->v4l2_dev, + "VPFE_CMD_S_CCDC_RAW_PARAMS: experimental ioctl\n"); + ret = ccdc_dev->hw_ops.set_params(param); + if (ret) { + v4l2_err(&vpfe_dev->v4l2_dev, + "Error in setting parameters in CCDC\n"); + goto unlock_out; + } + if (vpfe_get_ccdc_image_format(vpfe_dev, &vpfe_dev->fmt) < 0) { + v4l2_err(&vpfe_dev->v4l2_dev, + "Invalid image format at CCDC\n"); + goto unlock_out; + } + break; + default: + ret = -EINVAL; + } +unlock_out: + mutex_unlock(&vpfe_dev->lock); + return ret; +} + + +/* vpfe capture ioctl operations */ +static const struct v4l2_ioctl_ops vpfe_ioctl_ops = { + .vidioc_querycap = vpfe_querycap, + .vidioc_g_fmt_vid_cap = vpfe_g_fmt_vid_cap, + .vidioc_enum_fmt_vid_cap = vpfe_enum_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vpfe_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vpfe_try_fmt_vid_cap, + .vidioc_enum_input = vpfe_enum_input, + .vidioc_g_input = vpfe_g_input, + .vidioc_s_input = vpfe_s_input, + .vidioc_querystd = vpfe_querystd, + .vidioc_s_std = vpfe_s_std, + .vidioc_g_std = vpfe_g_std, + .vidioc_reqbufs = vpfe_reqbufs, + .vidioc_querybuf = vpfe_querybuf, + .vidioc_qbuf = vpfe_qbuf, + .vidioc_dqbuf = vpfe_dqbuf, + .vidioc_streamon = vpfe_streamon, + .vidioc_streamoff = vpfe_streamoff, + .vidioc_cropcap = vpfe_cropcap, + .vidioc_g_crop = vpfe_g_crop, + .vidioc_s_crop = vpfe_s_crop, + .vidioc_default = vpfe_param_handler, +}; + +static struct vpfe_device *vpfe_initialize(void) +{ + struct vpfe_device *vpfe_dev; + + /* Default number of buffers should be 3 */ + if ((numbuffers > 0) && + (numbuffers < config_params.min_numbuffers)) + numbuffers = config_params.min_numbuffers; + + /* + * Set buffer size to min buffers size if invalid buffer size is + * given + */ + if (bufsize < config_params.min_bufsize) + bufsize = config_params.min_bufsize; + + config_params.numbuffers = numbuffers; + + if (numbuffers) + config_params.device_bufsize = bufsize; + + /* Allocate memory for device objects */ + vpfe_dev = kzalloc(sizeof(*vpfe_dev), GFP_KERNEL); + + return vpfe_dev; +} + +static void vpfe_disable_clock(struct vpfe_device *vpfe_dev) +{ + struct vpfe_config *vpfe_cfg = vpfe_dev->cfg; + + clk_disable(vpfe_cfg->vpssclk); + clk_put(vpfe_cfg->vpssclk); + clk_disable(vpfe_cfg->slaveclk); + clk_put(vpfe_cfg->slaveclk); + v4l2_info(vpfe_dev->pdev->driver, + "vpfe vpss master & slave clocks disabled\n"); +} + +static int vpfe_enable_clock(struct vpfe_device *vpfe_dev) +{ + struct vpfe_config *vpfe_cfg = vpfe_dev->cfg; + int ret = -ENOENT; + + vpfe_cfg->vpssclk = clk_get(vpfe_dev->pdev, "vpss_master"); + if (NULL == vpfe_cfg->vpssclk) { + v4l2_err(vpfe_dev->pdev->driver, "No clock defined for" + "vpss_master\n"); + return ret; + } + + if (clk_enable(vpfe_cfg->vpssclk)) { + v4l2_err(vpfe_dev->pdev->driver, + "vpfe vpss master clock not enabled\n"); + goto out; + } + v4l2_info(vpfe_dev->pdev->driver, + "vpfe vpss master clock enabled\n"); + + vpfe_cfg->slaveclk = clk_get(vpfe_dev->pdev, "vpss_slave"); + if (NULL == vpfe_cfg->slaveclk) { + v4l2_err(vpfe_dev->pdev->driver, + "No clock defined for vpss slave\n"); + goto out; + } + + if (clk_enable(vpfe_cfg->slaveclk)) { + v4l2_err(vpfe_dev->pdev->driver, + "vpfe vpss slave clock not enabled\n"); + goto out; + } + v4l2_info(vpfe_dev->pdev->driver, "vpfe vpss slave clock enabled\n"); + return 0; +out: + if (vpfe_cfg->vpssclk) + clk_put(vpfe_cfg->vpssclk); + if (vpfe_cfg->slaveclk) + clk_put(vpfe_cfg->slaveclk); + + return -1; +} + +/* + * vpfe_probe : This function creates device entries by register + * itself to the V4L2 driver and initializes fields of each + * device objects + */ +static __init int vpfe_probe(struct platform_device *pdev) +{ + struct vpfe_subdev_info *sdinfo; + struct vpfe_config *vpfe_cfg; + struct resource *res1; + struct vpfe_device *vpfe_dev; + struct i2c_adapter *i2c_adap; + struct video_device *vfd; + int ret = -ENOMEM, i, j; + int num_subdevs = 0; + + /* Get the pointer to the device object */ + vpfe_dev = vpfe_initialize(); + + if (!vpfe_dev) { + v4l2_err(pdev->dev.driver, + "Failed to allocate memory for vpfe_dev\n"); + return ret; + } + + vpfe_dev->pdev = &pdev->dev; + + if (NULL == pdev->dev.platform_data) { + v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n"); + ret = -ENOENT; + goto probe_free_dev_mem; + } + + vpfe_cfg = pdev->dev.platform_data; + vpfe_dev->cfg = vpfe_cfg; + if (NULL == vpfe_cfg->ccdc || + NULL == vpfe_cfg->card_name || + NULL == vpfe_cfg->sub_devs) { + v4l2_err(pdev->dev.driver, "null ptr in vpfe_cfg\n"); + ret = -ENOENT; + goto probe_free_dev_mem; + } + + /* enable vpss clocks */ + ret = vpfe_enable_clock(vpfe_dev); + if (ret) + goto probe_free_dev_mem; + + mutex_lock(&ccdc_lock); + /* Allocate memory for ccdc configuration */ + ccdc_cfg = kmalloc(sizeof(struct ccdc_config), GFP_KERNEL); + if (NULL == ccdc_cfg) { + v4l2_err(pdev->dev.driver, + "Memory allocation failed for ccdc_cfg\n"); + goto probe_disable_clock; + } + + strncpy(ccdc_cfg->name, vpfe_cfg->ccdc, 32); + /* Get VINT0 irq resource */ + res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res1) { + v4l2_err(pdev->dev.driver, + "Unable to get interrupt for VINT0\n"); + ret = -ENOENT; + goto probe_disable_clock; + } + vpfe_dev->ccdc_irq0 = res1->start; + + /* Get VINT1 irq resource */ + res1 = platform_get_resource(pdev, + IORESOURCE_IRQ, 1); + if (!res1) { + v4l2_err(pdev->dev.driver, + "Unable to get interrupt for VINT1\n"); + ret = -ENOENT; + goto probe_disable_clock; + } + vpfe_dev->ccdc_irq1 = res1->start; + + /* Get address base of CCDC */ + res1 = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res1) { + v4l2_err(pdev->dev.driver, + "Unable to get register address map\n"); + ret = -ENOENT; + goto probe_disable_clock; + } + + ccdc_cfg->ccdc_addr_size = res1->end - res1->start + 1; + if (!request_mem_region(res1->start, ccdc_cfg->ccdc_addr_size, + pdev->dev.driver->name)) { + v4l2_err(pdev->dev.driver, + "Failed request_mem_region for ccdc base\n"); + ret = -ENXIO; + goto probe_disable_clock; + } + ccdc_cfg->ccdc_addr = ioremap_nocache(res1->start, + ccdc_cfg->ccdc_addr_size); + if (!ccdc_cfg->ccdc_addr) { + v4l2_err(pdev->dev.driver, "Unable to ioremap ccdc addr\n"); + ret = -ENXIO; + goto probe_out_release_mem1; + } + + ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, IRQF_DISABLED, + "vpfe_capture0", vpfe_dev); + + if (0 != ret) { + v4l2_err(pdev->dev.driver, "Unable to request interrupt\n"); + goto probe_out_unmap1; + } + + /* Allocate memory for video device */ + vfd = video_device_alloc(); + if (NULL == vfd) { + ret = -ENOMEM; + v4l2_err(pdev->dev.driver, + "Unable to alloc video device\n"); + goto probe_out_release_irq; + } + + /* Initialize field of video device */ + vfd->release = video_device_release; + vfd->fops = &vpfe_fops; + vfd->ioctl_ops = &vpfe_ioctl_ops; + vfd->minor = -1; + vfd->tvnorms = 0; + vfd->current_norm = V4L2_STD_PAL; + vfd->v4l2_dev = &vpfe_dev->v4l2_dev; + snprintf(vfd->name, sizeof(vfd->name), + "%s_V%d.%d.%d", + CAPTURE_DRV_NAME, + (VPFE_CAPTURE_VERSION_CODE >> 16) & 0xff, + (VPFE_CAPTURE_VERSION_CODE >> 8) & 0xff, + (VPFE_CAPTURE_VERSION_CODE) & 0xff); + /* Set video_dev to the video device */ + vpfe_dev->video_dev = vfd; + + ret = v4l2_device_register(&pdev->dev, &vpfe_dev->v4l2_dev); + if (ret) { + v4l2_err(pdev->dev.driver, + "Unable to register v4l2 device.\n"); + goto probe_out_video_release; + } + v4l2_info(&vpfe_dev->v4l2_dev, "v4l2 device registered\n"); + spin_lock_init(&vpfe_dev->irqlock); + spin_lock_init(&vpfe_dev->dma_queue_lock); + mutex_init(&vpfe_dev->lock); + + /* Initialize field of the device objects */ + vpfe_dev->numbuffers = config_params.numbuffers; + + /* Initialize prio member of device object */ + v4l2_prio_init(&vpfe_dev->prio); + /* register video device */ + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "trying to register vpfe device.\n"); + v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, + "video_dev=%x\n", (int)&vpfe_dev->video_dev); + vpfe_dev->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + ret = video_register_device(vpfe_dev->video_dev, + VFL_TYPE_GRABBER, -1); + + if (ret) { + v4l2_err(pdev->dev.driver, + "Unable to register video device.\n"); + goto probe_out_v4l2_unregister; + } + + v4l2_info(&vpfe_dev->v4l2_dev, "video device registered\n"); + /* set the driver data in platform device */ + platform_set_drvdata(pdev, vpfe_dev); + /* set driver private data */ + video_set_drvdata(vpfe_dev->video_dev, vpfe_dev); + i2c_adap = i2c_get_adapter(1); + vpfe_cfg = pdev->dev.platform_data; + num_subdevs = vpfe_cfg->num_subdevs; + vpfe_dev->sd = kmalloc(sizeof(struct v4l2_subdev *) * num_subdevs, + GFP_KERNEL); + if (NULL == vpfe_dev->sd) { + v4l2_err(&vpfe_dev->v4l2_dev, + "unable to allocate memory for subdevice pointers\n"); + ret = -ENOMEM; + goto probe_out_video_unregister; + } + + for (i = 0; i < num_subdevs; i++) { + struct v4l2_input *inps; + + sdinfo = &vpfe_cfg->sub_devs[i]; + + /* Load up the subdevice */ + vpfe_dev->sd[i] = + v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev, + i2c_adap, + sdinfo->name, + &sdinfo->board_info, + NULL); + if (vpfe_dev->sd[i]) { + v4l2_info(&vpfe_dev->v4l2_dev, + "v4l2 sub device %s registered\n", + sdinfo->name); + vpfe_dev->sd[i]->grp_id = sdinfo->grp_id; + /* update tvnorms from the sub devices */ + for (j = 0; j < sdinfo->num_inputs; j++) { + inps = &sdinfo->inputs[j]; + vfd->tvnorms |= inps->std; + } + } else { + v4l2_info(&vpfe_dev->v4l2_dev, + "v4l2 sub device %s register fails\n", + sdinfo->name); + goto probe_sd_out; + } + } + + /* set first sub device as current one */ + vpfe_dev->current_subdev = &vpfe_cfg->sub_devs[0]; + + /* We have at least one sub device to work with */ + mutex_unlock(&ccdc_lock); + return 0; + +probe_sd_out: + kfree(vpfe_dev->sd); +probe_out_video_unregister: + video_unregister_device(vpfe_dev->video_dev); +probe_out_v4l2_unregister: + v4l2_device_unregister(&vpfe_dev->v4l2_dev); +probe_out_video_release: + if (vpfe_dev->video_dev->minor == -1) + video_device_release(vpfe_dev->video_dev); +probe_out_release_irq: + free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); +probe_out_unmap1: + iounmap(ccdc_cfg->ccdc_addr); +probe_out_release_mem1: + release_mem_region(res1->start, res1->end - res1->start + 1); +probe_disable_clock: + vpfe_disable_clock(vpfe_dev); + mutex_unlock(&ccdc_lock); + kfree(ccdc_cfg); +probe_free_dev_mem: + kfree(vpfe_dev); + return ret; +} + +/* + * vpfe_remove : It un-register device from V4L2 driver + */ +static int vpfe_remove(struct platform_device *pdev) +{ + struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev); + struct resource *res; + + v4l2_info(pdev->dev.driver, "vpfe_remove\n"); + + free_irq(vpfe_dev->ccdc_irq0, vpfe_dev); + kfree(vpfe_dev->sd); + v4l2_device_unregister(&vpfe_dev->v4l2_dev); + video_unregister_device(vpfe_dev->video_dev); + mutex_lock(&ccdc_lock); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, res->end - res->start + 1); + iounmap(ccdc_cfg->ccdc_addr); + mutex_unlock(&ccdc_lock); + vpfe_disable_clock(vpfe_dev); + kfree(vpfe_dev); + kfree(ccdc_cfg); + return 0; +} + +static int +vpfe_suspend(struct device *dev) +{ + /* add suspend code here later */ + return -1; +} + +static int +vpfe_resume(struct device *dev) +{ + /* add resume code here later */ + return -1; +} + +static struct dev_pm_ops vpfe_dev_pm_ops = { + .suspend = vpfe_suspend, + .resume = vpfe_resume, +}; + +static struct platform_driver vpfe_driver = { + .driver = { + .name = CAPTURE_DRV_NAME, + .owner = THIS_MODULE, + .pm = &vpfe_dev_pm_ops, + }, + .probe = vpfe_probe, + .remove = __devexit_p(vpfe_remove), +}; + +static __init int vpfe_init(void) +{ + printk(KERN_NOTICE "vpfe_init\n"); + /* Register driver to the kernel */ + return platform_driver_register(&vpfe_driver); +} + +/* + * vpfe_cleanup : This function un-registers device driver + */ +static void vpfe_cleanup(void) +{ + platform_driver_unregister(&vpfe_driver); +} + +module_init(vpfe_init); +module_exit(vpfe_cleanup); diff --git a/linux/drivers/media/video/davinci/vpif.c b/linux/drivers/media/video/davinci/vpif.c new file mode 100644 index 000000000..aa771268a --- /dev/null +++ b/linux/drivers/media/video/davinci/vpif.c @@ -0,0 +1,234 @@ +/* + * vpif - DM646x Video Port Interface driver + * VPIF is a receiver and transmitter for video data. It has two channels(0, 1) + * that receiveing video byte stream and two channels(2, 3) for video output. + * The hardware supports SDTV, HDTV formats, raw data capture. + * Currently, the driver supports NTSC and PAL standards. + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> + +#include "vpif.h" + +MODULE_DESCRIPTION("TI DaVinci Video Port Interface driver"); +MODULE_LICENSE("GPL"); + +#define VPIF_CH0_MAX_MODES (22) +#define VPIF_CH1_MAX_MODES (02) +#define VPIF_CH2_MAX_MODES (15) +#define VPIF_CH3_MAX_MODES (02) + +static inline void vpif_wr_bit(u32 reg, u32 bit, u32 val) +{ + if (val) + vpif_set_bit(reg, bit); + else + vpif_clr_bit(reg, bit); +} + +/* This structure is used to keep track of VPIF size register's offsets */ +struct vpif_registers { + u32 h_cfg, v_cfg_00, v_cfg_01, v_cfg_02, v_cfg, ch_ctrl; + u32 line_offset, vanc0_strt, vanc0_size, vanc1_strt; + u32 vanc1_size, width_mask, len_mask; + u8 max_modes; +}; + +static const struct vpif_registers vpifregs[VPIF_NUM_CHANNELS] = { + /* Channel0 */ + { + VPIF_CH0_H_CFG, VPIF_CH0_V_CFG_00, VPIF_CH0_V_CFG_01, + VPIF_CH0_V_CFG_02, VPIF_CH0_V_CFG_03, VPIF_CH0_CTRL, + VPIF_CH0_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF, + VPIF_CH0_MAX_MODES, + }, + /* Channel1 */ + { + VPIF_CH1_H_CFG, VPIF_CH1_V_CFG_00, VPIF_CH1_V_CFG_01, + VPIF_CH1_V_CFG_02, VPIF_CH1_V_CFG_03, VPIF_CH1_CTRL, + VPIF_CH1_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF, + VPIF_CH1_MAX_MODES, + }, + /* Channel2 */ + { + VPIF_CH2_H_CFG, VPIF_CH2_V_CFG_00, VPIF_CH2_V_CFG_01, + VPIF_CH2_V_CFG_02, VPIF_CH2_V_CFG_03, VPIF_CH2_CTRL, + VPIF_CH2_IMG_ADD_OFST, VPIF_CH2_VANC0_STRT, VPIF_CH2_VANC0_SIZE, + VPIF_CH2_VANC1_STRT, VPIF_CH2_VANC1_SIZE, 0x7FF, 0x7FF, + VPIF_CH2_MAX_MODES + }, + /* Channel3 */ + { + VPIF_CH3_H_CFG, VPIF_CH3_V_CFG_00, VPIF_CH3_V_CFG_01, + VPIF_CH3_V_CFG_02, VPIF_CH3_V_CFG_03, VPIF_CH3_CTRL, + VPIF_CH3_IMG_ADD_OFST, VPIF_CH3_VANC0_STRT, VPIF_CH3_VANC0_SIZE, + VPIF_CH3_VANC1_STRT, VPIF_CH3_VANC1_SIZE, 0x7FF, 0x7FF, + VPIF_CH3_MAX_MODES + }, +}; + +/* vpif_set_mode_info: + * This function is used to set horizontal and vertical config parameters + * As per the standard in the channel, configure the values of L1, L3, + * L5, L7 L9, L11 in VPIF Register , also write width and height + */ +static void vpif_set_mode_info(const struct vpif_channel_config_params *config, + u8 channel_id, u8 config_channel_id) +{ + u32 value; + + value = (config->eav2sav & vpifregs[config_channel_id].width_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->sav2eav & vpifregs[config_channel_id].width_mask); + regw(value, vpifregs[channel_id].h_cfg); + + value = (config->l1 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l3 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_00); + + value = (config->l5 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l7 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_01); + + value = (config->l9 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l11 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_02); + + value = (config->vsize & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg); +} + +/* config_vpif_params + * Function to set the parameters of a channel + * Mainly modifies the channel ciontrol register + * It sets frame format, yc mux mode + */ +static void config_vpif_params(struct vpif_params *vpifparams, + u8 channel_id, u8 found) +{ + const struct vpif_channel_config_params *config = &vpifparams->std_info; + u32 value, ch_nip, reg; + u8 start, end; + int i; + + start = channel_id; + end = channel_id + found; + + for (i = start; i < end; i++) { + reg = vpifregs[i].ch_ctrl; + if (channel_id < 2) + ch_nip = VPIF_CAPTURE_CH_NIP; + else + ch_nip = VPIF_DISPLAY_CH_NIP; + + vpif_wr_bit(reg, ch_nip, config->frm_fmt); + vpif_wr_bit(reg, VPIF_CH_YC_MUX_BIT, config->ycmux_mode); + vpif_wr_bit(reg, VPIF_CH_INPUT_FIELD_FRAME_BIT, + vpifparams->video_params.storage_mode); + + /* Set raster scanning SDR Format */ + vpif_clr_bit(reg, VPIF_CH_SDR_FMT_BIT); + vpif_wr_bit(reg, VPIF_CH_DATA_MODE_BIT, config->capture_format); + + if (channel_id > 1) /* Set the Pixel enable bit */ + vpif_set_bit(reg, VPIF_DISPLAY_PIX_EN_BIT); + else if (config->capture_format) { + /* Set the polarity of various pins */ + vpif_wr_bit(reg, VPIF_CH_FID_POLARITY_BIT, + vpifparams->params.raw_params.fid_pol); + vpif_wr_bit(reg, VPIF_CH_V_VALID_POLARITY_BIT, + vpifparams->params.raw_params.vd_pol); + vpif_wr_bit(reg, VPIF_CH_H_VALID_POLARITY_BIT, + vpifparams->params.raw_params.hd_pol); + + value = regr(reg); + /* Set data width */ + value &= ((~(unsigned int)(0x3)) << + VPIF_CH_DATA_WIDTH_BIT); + value |= ((vpifparams->params.raw_params.data_sz) << + VPIF_CH_DATA_WIDTH_BIT); + regw(value, reg); + } + + /* Write the pitch in the driver */ + regw((vpifparams->video_params.hpitch), + vpifregs[i].line_offset); + } +} + +/* vpif_set_video_params + * This function is used to set video parameters in VPIF register + */ +int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id) +{ + const struct vpif_channel_config_params *config = &vpifparams->std_info; + int found = 1; + + vpif_set_mode_info(config, channel_id, channel_id); + if (!config->ycmux_mode) { + /* YC are on separate channels (HDTV formats) */ + vpif_set_mode_info(config, channel_id + 1, channel_id); + found = 2; + } + + config_vpif_params(vpifparams, channel_id, found); + + regw(0x80, VPIF_REQ_SIZE); + regw(0x01, VPIF_EMULATION_CTRL); + + return found; +} +EXPORT_SYMBOL(vpif_set_video_params); + +void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams, + u8 channel_id) +{ + u32 value; + + value = 0x3F8 & (vbiparams->hstart0); + value |= 0x3FFFFFF & ((vbiparams->vstart0) << 16); + regw(value, vpifregs[channel_id].vanc0_strt); + + value = 0x3F8 & (vbiparams->hstart1); + value |= 0x3FFFFFF & ((vbiparams->vstart1) << 16); + regw(value, vpifregs[channel_id].vanc1_strt); + + value = 0x3F8 & (vbiparams->hsize0); + value |= 0x3FFFFFF & ((vbiparams->vsize0) << 16); + regw(value, vpifregs[channel_id].vanc0_size); + + value = 0x3F8 & (vbiparams->hsize1); + value |= 0x3FFFFFF & ((vbiparams->vsize1) << 16); + regw(value, vpifregs[channel_id].vanc1_size); + +} +EXPORT_SYMBOL(vpif_set_vbi_display_params); + +int vpif_channel_getfid(u8 channel_id) +{ + return (regr(vpifregs[channel_id].ch_ctrl) & VPIF_CH_FID_MASK) + >> VPIF_CH_FID_SHIFT; +} +EXPORT_SYMBOL(vpif_channel_getfid); + +void vpif_base_addr_init(void __iomem *base) +{ + vpif_base = base; +} +EXPORT_SYMBOL(vpif_base_addr_init); diff --git a/linux/drivers/media/video/davinci/vpif.h b/linux/drivers/media/video/davinci/vpif.h new file mode 100644 index 000000000..fca26dcb5 --- /dev/null +++ b/linux/drivers/media/video/davinci/vpif.h @@ -0,0 +1,632 @@ +/* + * VPIF header file + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VPIF_H +#define VPIF_H + +#include <linux/io.h> +#include <linux/videodev2.h> +#include <mach/hardware.h> + +/* Maximum channel allowed */ +#define VPIF_NUM_CHANNELS (4) +#define VPIF_CAPTURE_NUM_CHANNELS (2) +#define VPIF_DISPLAY_NUM_CHANNELS (2) + +/* Macros to read/write registers */ +static void __iomem *vpif_base; +#define regr(reg) readl((reg) + vpif_base) +#define regw(value, reg) writel(value, (reg + vpif_base)) + +/* Register Addresss Offsets */ +#define VPIF_PID (0x0000) +#define VPIF_CH0_CTRL (0x0004) +#define VPIF_CH1_CTRL (0x0008) +#define VPIF_CH2_CTRL (0x000C) +#define VPIF_CH3_CTRL (0x0010) + +#define VPIF_INTEN (0x0020) +#define VPIF_INTEN_SET (0x0024) +#define VPIF_INTEN_CLR (0x0028) +#define VPIF_STATUS (0x002C) +#define VPIF_STATUS_CLR (0x0030) +#define VPIF_EMULATION_CTRL (0x0034) +#define VPIF_REQ_SIZE (0x0038) + +#define VPIF_CH0_TOP_STRT_ADD_LUMA (0x0040) +#define VPIF_CH0_BTM_STRT_ADD_LUMA (0x0044) +#define VPIF_CH0_TOP_STRT_ADD_CHROMA (0x0048) +#define VPIF_CH0_BTM_STRT_ADD_CHROMA (0x004c) +#define VPIF_CH0_TOP_STRT_ADD_HANC (0x0050) +#define VPIF_CH0_BTM_STRT_ADD_HANC (0x0054) +#define VPIF_CH0_TOP_STRT_ADD_VANC (0x0058) +#define VPIF_CH0_BTM_STRT_ADD_VANC (0x005c) +#define VPIF_CH0_SP_CFG (0x0060) +#define VPIF_CH0_IMG_ADD_OFST (0x0064) +#define VPIF_CH0_HANC_ADD_OFST (0x0068) +#define VPIF_CH0_H_CFG (0x006c) +#define VPIF_CH0_V_CFG_00 (0x0070) +#define VPIF_CH0_V_CFG_01 (0x0074) +#define VPIF_CH0_V_CFG_02 (0x0078) +#define VPIF_CH0_V_CFG_03 (0x007c) + +#define VPIF_CH1_TOP_STRT_ADD_LUMA (0x0080) +#define VPIF_CH1_BTM_STRT_ADD_LUMA (0x0084) +#define VPIF_CH1_TOP_STRT_ADD_CHROMA (0x0088) +#define VPIF_CH1_BTM_STRT_ADD_CHROMA (0x008c) +#define VPIF_CH1_TOP_STRT_ADD_HANC (0x0090) +#define VPIF_CH1_BTM_STRT_ADD_HANC (0x0094) +#define VPIF_CH1_TOP_STRT_ADD_VANC (0x0098) +#define VPIF_CH1_BTM_STRT_ADD_VANC (0x009c) +#define VPIF_CH1_SP_CFG (0x00a0) +#define VPIF_CH1_IMG_ADD_OFST (0x00a4) +#define VPIF_CH1_HANC_ADD_OFST (0x00a8) +#define VPIF_CH1_H_CFG (0x00ac) +#define VPIF_CH1_V_CFG_00 (0x00b0) +#define VPIF_CH1_V_CFG_01 (0x00b4) +#define VPIF_CH1_V_CFG_02 (0x00b8) +#define VPIF_CH1_V_CFG_03 (0x00bc) + +#define VPIF_CH2_TOP_STRT_ADD_LUMA (0x00c0) +#define VPIF_CH2_BTM_STRT_ADD_LUMA (0x00c4) +#define VPIF_CH2_TOP_STRT_ADD_CHROMA (0x00c8) +#define VPIF_CH2_BTM_STRT_ADD_CHROMA (0x00cc) +#define VPIF_CH2_TOP_STRT_ADD_HANC (0x00d0) +#define VPIF_CH2_BTM_STRT_ADD_HANC (0x00d4) +#define VPIF_CH2_TOP_STRT_ADD_VANC (0x00d8) +#define VPIF_CH2_BTM_STRT_ADD_VANC (0x00dc) +#define VPIF_CH2_SP_CFG (0x00e0) +#define VPIF_CH2_IMG_ADD_OFST (0x00e4) +#define VPIF_CH2_HANC_ADD_OFST (0x00e8) +#define VPIF_CH2_H_CFG (0x00ec) +#define VPIF_CH2_V_CFG_00 (0x00f0) +#define VPIF_CH2_V_CFG_01 (0x00f4) +#define VPIF_CH2_V_CFG_02 (0x00f8) +#define VPIF_CH2_V_CFG_03 (0x00fc) +#define VPIF_CH2_HANC0_STRT (0x0100) +#define VPIF_CH2_HANC0_SIZE (0x0104) +#define VPIF_CH2_HANC1_STRT (0x0108) +#define VPIF_CH2_HANC1_SIZE (0x010c) +#define VPIF_CH2_VANC0_STRT (0x0110) +#define VPIF_CH2_VANC0_SIZE (0x0114) +#define VPIF_CH2_VANC1_STRT (0x0118) +#define VPIF_CH2_VANC1_SIZE (0x011c) + +#define VPIF_CH3_TOP_STRT_ADD_LUMA (0x0140) +#define VPIF_CH3_BTM_STRT_ADD_LUMA (0x0144) +#define VPIF_CH3_TOP_STRT_ADD_CHROMA (0x0148) +#define VPIF_CH3_BTM_STRT_ADD_CHROMA (0x014c) +#define VPIF_CH3_TOP_STRT_ADD_HANC (0x0150) +#define VPIF_CH3_BTM_STRT_ADD_HANC (0x0154) +#define VPIF_CH3_TOP_STRT_ADD_VANC (0x0158) +#define VPIF_CH3_BTM_STRT_ADD_VANC (0x015c) +#define VPIF_CH3_SP_CFG (0x0160) +#define VPIF_CH3_IMG_ADD_OFST (0x0164) +#define VPIF_CH3_HANC_ADD_OFST (0x0168) +#define VPIF_CH3_H_CFG (0x016c) +#define VPIF_CH3_V_CFG_00 (0x0170) +#define VPIF_CH3_V_CFG_01 (0x0174) +#define VPIF_CH3_V_CFG_02 (0x0178) +#define VPIF_CH3_V_CFG_03 (0x017c) +#define VPIF_CH3_HANC0_STRT (0x0180) +#define VPIF_CH3_HANC0_SIZE (0x0184) +#define VPIF_CH3_HANC1_STRT (0x0188) +#define VPIF_CH3_HANC1_SIZE (0x018c) +#define VPIF_CH3_VANC0_STRT (0x0190) +#define VPIF_CH3_VANC0_SIZE (0x0194) +#define VPIF_CH3_VANC1_STRT (0x0198) +#define VPIF_CH3_VANC1_SIZE (0x019c) + +#define VPIF_IODFT_CTRL (0x01c0) + +/* Functions for bit Manipulation */ +static inline void vpif_set_bit(u32 reg, u32 bit) +{ + regw((regr(reg)) | (0x01 << bit), reg); +} + +static inline void vpif_clr_bit(u32 reg, u32 bit) +{ + regw(((regr(reg)) & ~(0x01 << bit)), reg); +} + +/* Macro for Generating mask */ +#ifdef GENERATE_MASK +#undef GENERATE_MASK +#endif + +#define GENERATE_MASK(bits, pos) \ + ((((0xFFFFFFFF) << (32 - bits)) >> (32 - bits)) << pos) + +/* Bit positions in the channel control registers */ +#define VPIF_CH_DATA_MODE_BIT (2) +#define VPIF_CH_YC_MUX_BIT (3) +#define VPIF_CH_SDR_FMT_BIT (4) +#define VPIF_CH_HANC_EN_BIT (8) +#define VPIF_CH_VANC_EN_BIT (9) + +#define VPIF_CAPTURE_CH_NIP (10) +#define VPIF_DISPLAY_CH_NIP (11) + +#define VPIF_DISPLAY_PIX_EN_BIT (10) + +#define VPIF_CH_INPUT_FIELD_FRAME_BIT (12) + +#define VPIF_CH_FID_POLARITY_BIT (15) +#define VPIF_CH_V_VALID_POLARITY_BIT (14) +#define VPIF_CH_H_VALID_POLARITY_BIT (13) +#define VPIF_CH_DATA_WIDTH_BIT (28) + +#define VPIF_CH_CLK_EDGE_CTRL_BIT (31) + +/* Mask various length */ +#define VPIF_CH_EAVSAV_MASK GENERATE_MASK(13, 0) +#define VPIF_CH_LEN_MASK GENERATE_MASK(12, 0) +#define VPIF_CH_WIDTH_MASK GENERATE_MASK(13, 0) +#define VPIF_CH_LEN_SHIFT (16) + +/* VPIF masks for registers */ +#define VPIF_REQ_SIZE_MASK (0x1ff) + +/* bit posotion of interrupt vpif_ch_intr register */ +#define VPIF_INTEN_FRAME_CH0 (0x00000001) +#define VPIF_INTEN_FRAME_CH1 (0x00000002) +#define VPIF_INTEN_FRAME_CH2 (0x00000004) +#define VPIF_INTEN_FRAME_CH3 (0x00000008) + +/* bit position of clock and channel enable in vpif_chn_ctrl register */ + +#define VPIF_CH0_CLK_EN (0x00000002) +#define VPIF_CH0_EN (0x00000001) +#define VPIF_CH1_CLK_EN (0x00000002) +#define VPIF_CH1_EN (0x00000001) +#define VPIF_CH2_CLK_EN (0x00000002) +#define VPIF_CH2_EN (0x00000001) +#define VPIF_CH3_CLK_EN (0x00000002) +#define VPIF_CH3_EN (0x00000001) +#define VPIF_CH_CLK_EN (0x00000002) +#define VPIF_CH_EN (0x00000001) + +#define VPIF_INT_TOP (0x00) +#define VPIF_INT_BOTTOM (0x01) +#define VPIF_INT_BOTH (0x02) + +#define VPIF_CH0_INT_CTRL_SHIFT (6) +#define VPIF_CH1_INT_CTRL_SHIFT (6) +#define VPIF_CH2_INT_CTRL_SHIFT (6) +#define VPIF_CH3_INT_CTRL_SHIFT (6) +#define VPIF_CH_INT_CTRL_SHIFT (6) + +/* enabled interrupt on both the fields on vpid_ch0_ctrl register */ +#define channel0_intr_assert() (regw((regr(VPIF_CH0_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH0_INT_CTRL_SHIFT)), VPIF_CH0_CTRL)) + +/* enabled interrupt on both the fields on vpid_ch1_ctrl register */ +#define channel1_intr_assert() (regw((regr(VPIF_CH1_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH1_INT_CTRL_SHIFT)), VPIF_CH1_CTRL)) + +/* enabled interrupt on both the fields on vpid_ch0_ctrl register */ +#define channel2_intr_assert() (regw((regr(VPIF_CH2_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH2_INT_CTRL_SHIFT)), VPIF_CH2_CTRL)) + +/* enabled interrupt on both the fields on vpid_ch1_ctrl register */ +#define channel3_intr_assert() (regw((regr(VPIF_CH3_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH3_INT_CTRL_SHIFT)), VPIF_CH3_CTRL)) + +#define VPIF_CH_FID_MASK (0x20) +#define VPIF_CH_FID_SHIFT (5) + +#define VPIF_NTSC_VBI_START_FIELD0 (1) +#define VPIF_NTSC_VBI_START_FIELD1 (263) +#define VPIF_PAL_VBI_START_FIELD0 (624) +#define VPIF_PAL_VBI_START_FIELD1 (311) + +#define VPIF_NTSC_HBI_START_FIELD0 (1) +#define VPIF_NTSC_HBI_START_FIELD1 (263) +#define VPIF_PAL_HBI_START_FIELD0 (624) +#define VPIF_PAL_HBI_START_FIELD1 (311) + +#define VPIF_NTSC_VBI_COUNT_FIELD0 (20) +#define VPIF_NTSC_VBI_COUNT_FIELD1 (19) +#define VPIF_PAL_VBI_COUNT_FIELD0 (24) +#define VPIF_PAL_VBI_COUNT_FIELD1 (25) + +#define VPIF_NTSC_HBI_COUNT_FIELD0 (263) +#define VPIF_NTSC_HBI_COUNT_FIELD1 (262) +#define VPIF_PAL_HBI_COUNT_FIELD0 (312) +#define VPIF_PAL_HBI_COUNT_FIELD1 (313) + +#define VPIF_NTSC_VBI_SAMPLES_PER_LINE (720) +#define VPIF_PAL_VBI_SAMPLES_PER_LINE (720) +#define VPIF_NTSC_HBI_SAMPLES_PER_LINE (268) +#define VPIF_PAL_HBI_SAMPLES_PER_LINE (280) + +#define VPIF_CH_VANC_EN (0x20) +#define VPIF_DMA_REQ_SIZE (0x080) +#define VPIF_EMULATION_DISABLE (0x01) + +extern u8 irq_vpif_capture_channel[VPIF_NUM_CHANNELS]; + +/* inline function to enable/disable channel0 */ +static inline void enable_channel0(int enable) +{ + if (enable) + regw((regr(VPIF_CH0_CTRL) | (VPIF_CH0_EN)), VPIF_CH0_CTRL); + else + regw((regr(VPIF_CH0_CTRL) & (~VPIF_CH0_EN)), VPIF_CH0_CTRL); +} + +/* inline function to enable/disable channel1 */ +static inline void enable_channel1(int enable) +{ + if (enable) + regw((regr(VPIF_CH1_CTRL) | (VPIF_CH1_EN)), VPIF_CH1_CTRL); + else + regw((regr(VPIF_CH1_CTRL) & (~VPIF_CH1_EN)), VPIF_CH1_CTRL); +} + +/* inline function to enable interrupt for channel0 */ +static inline void channel0_intr_enable(int enable) +{ + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH0), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH0), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH0)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH0), + VPIF_INTEN_SET); + } +} + +/* inline function to enable interrupt for channel1 */ +static inline void channel1_intr_enable(int enable) +{ + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH1), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH1), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH1)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH1), + VPIF_INTEN_SET); + } +} + +/* inline function to set buffer addresses in case of Y/C non mux mode */ +static inline void ch0_set_videobuf_addr_yc_nmux(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH0_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH0_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH1_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH1_BTM_STRT_ADD_CHROMA); +} + +/* inline function to set buffer addresses in VPIF registers for video data */ +static inline void ch0_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH0_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH0_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH0_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH0_BTM_STRT_ADD_CHROMA); +} + +static inline void ch1_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + + regw(top_strt_luma, VPIF_CH1_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH1_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH1_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH1_BTM_STRT_ADD_CHROMA); +} + +static inline void ch0_set_vbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH0_TOP_STRT_ADD_VANC); + regw(btm_vbi, VPIF_CH0_BTM_STRT_ADD_VANC); +} + +static inline void ch0_set_hbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH0_TOP_STRT_ADD_HANC); + regw(btm_vbi, VPIF_CH0_BTM_STRT_ADD_HANC); +} + +static inline void ch1_set_vbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH1_TOP_STRT_ADD_VANC); + regw(btm_vbi, VPIF_CH1_BTM_STRT_ADD_VANC); +} + +static inline void ch1_set_hbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH1_TOP_STRT_ADD_HANC); + regw(btm_vbi, VPIF_CH1_BTM_STRT_ADD_HANC); +} + +/* Inline function to enable raw vbi in the given channel */ +static inline void disable_raw_feature(u8 channel_id, u8 index) +{ + u32 ctrl_reg; + if (0 == channel_id) + ctrl_reg = VPIF_CH0_CTRL; + else + ctrl_reg = VPIF_CH1_CTRL; + + if (1 == index) + vpif_clr_bit(ctrl_reg, VPIF_CH_VANC_EN_BIT); + else + vpif_clr_bit(ctrl_reg, VPIF_CH_HANC_EN_BIT); +} + +static inline void enable_raw_feature(u8 channel_id, u8 index) +{ + u32 ctrl_reg; + if (0 == channel_id) + ctrl_reg = VPIF_CH0_CTRL; + else + ctrl_reg = VPIF_CH1_CTRL; + + if (1 == index) + vpif_set_bit(ctrl_reg, VPIF_CH_VANC_EN_BIT); + else + vpif_set_bit(ctrl_reg, VPIF_CH_HANC_EN_BIT); +} + +/* inline function to enable/disable channel2 */ +static inline void enable_channel2(int enable) +{ + if (enable) { + regw((regr(VPIF_CH2_CTRL) | (VPIF_CH2_CLK_EN)), VPIF_CH2_CTRL); + regw((regr(VPIF_CH2_CTRL) | (VPIF_CH2_EN)), VPIF_CH2_CTRL); + } else { + regw((regr(VPIF_CH2_CTRL) & (~VPIF_CH2_CLK_EN)), VPIF_CH2_CTRL); + regw((regr(VPIF_CH2_CTRL) & (~VPIF_CH2_EN)), VPIF_CH2_CTRL); + } +} + +/* inline function to enable/disable channel3 */ +static inline void enable_channel3(int enable) +{ + if (enable) { + regw((regr(VPIF_CH3_CTRL) | (VPIF_CH3_CLK_EN)), VPIF_CH3_CTRL); + regw((regr(VPIF_CH3_CTRL) | (VPIF_CH3_EN)), VPIF_CH3_CTRL); + } else { + regw((regr(VPIF_CH3_CTRL) & (~VPIF_CH3_CLK_EN)), VPIF_CH3_CTRL); + regw((regr(VPIF_CH3_CTRL) & (~VPIF_CH3_EN)), VPIF_CH3_CTRL); + } +} + +/* inline function to enable interrupt for channel2 */ +static inline void channel2_intr_enable(int enable) +{ + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH2), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH2), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH2)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH2), + VPIF_INTEN_SET); + } +} + +/* inline function to enable interrupt for channel3 */ +static inline void channel3_intr_enable(int enable) +{ + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH3), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH3), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH3)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH3), + VPIF_INTEN_SET); + } +} + +/* inline function to enable raw vbi data for channel2 */ +static inline void channel2_raw_enable(int enable, u8 index) +{ + u32 mask; + + if (1 == index) + mask = VPIF_CH_VANC_EN_BIT; + else + mask = VPIF_CH_HANC_EN_BIT; + + if (enable) + vpif_set_bit(VPIF_CH2_CTRL, mask); + else + vpif_clr_bit(VPIF_CH2_CTRL, mask); +} + +/* inline function to enable raw vbi data for channel3*/ +static inline void channel3_raw_enable(int enable, u8 index) +{ + u32 mask; + + if (1 == index) + mask = VPIF_CH_VANC_EN_BIT; + else + mask = VPIF_CH_HANC_EN_BIT; + + if (enable) + vpif_set_bit(VPIF_CH3_CTRL, mask); + else + vpif_clr_bit(VPIF_CH3_CTRL, mask); +} + +/* inline function to set buffer addresses in case of Y/C non mux mode */ +static inline void ch2_set_videobuf_addr_yc_nmux(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH3_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH3_BTM_STRT_ADD_CHROMA); +} + +/* inline function to set buffer addresses in VPIF registers for video data */ +static inline void ch2_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH2_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH2_BTM_STRT_ADD_CHROMA); +} + +static inline void ch3_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH3_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH3_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH3_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH3_BTM_STRT_ADD_CHROMA); +} + +/* inline function to set buffer addresses in VPIF registers for vbi data */ +static inline void ch2_set_vbi_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_VANC); + regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_VANC); +} + +static inline void ch3_set_vbi_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH3_TOP_STRT_ADD_VANC); + regw(btm_strt_luma, VPIF_CH3_BTM_STRT_ADD_VANC); +} + +#define VPIF_MAX_NAME (30) + +/* This structure will store size parameters as per the mode selected by user */ +struct vpif_channel_config_params { + char name[VPIF_MAX_NAME]; /* Name of the mode */ + u16 width; /* Indicates width of the image */ + u16 height; /* Indicates height of the image */ + u8 fps; + u8 frm_fmt; /* Indicates whether this is interlaced + * or progressive format */ + u8 ycmux_mode; /* Indicates whether this mode requires + * single or two channels */ + u16 eav2sav; /* length of sav 2 eav */ + u16 sav2eav; /* length of sav 2 eav */ + u16 l1, l3, l5, l7, l9, l11; /* Other parameter configurations */ + u16 vsize; /* Vertical size of the image */ + u8 capture_format; /* Indicates whether capture format + * is in BT or in CCD/CMOS */ + u8 vbi_supported; /* Indicates whether this mode + * supports capturing vbi or not */ + u8 hd_sd; + v4l2_std_id stdid; +}; + +struct vpif_interface; +struct vpif_params; +struct vpif_vbi_params; + +int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id); +void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams, + u8 channel_id); +int vpif_channel_getfid(u8 channel_id); +void vpif_base_addr_init(void __iomem *base); + +/* Enumerated data types */ +enum vpif_capture_pinpol { + VPIF_CAPTURE_PINPOL_SAME = 0, + VPIF_CAPTURE_PINPOL_INVERT = 1 +}; + +enum data_size { + _8BITS = 0, + _10BITS, + _12BITS, +}; + +struct vpif_capture_params_raw { + enum data_size data_sz; + enum vpif_capture_pinpol fid_pol; + enum vpif_capture_pinpol vd_pol; + enum vpif_capture_pinpol hd_pol; +}; + +/* Structure for vpif parameters for raw vbi data */ +struct vpif_vbi_params { + __u32 hstart0; /* Horizontal start of raw vbi data for first field */ + __u32 vstart0; /* Vertical start of raw vbi data for first field */ + __u32 hsize0; /* Horizontal size of raw vbi data for first field */ + __u32 vsize0; /* Vertical size of raw vbi data for first field */ + __u32 hstart1; /* Horizontal start of raw vbi data for second field */ + __u32 vstart1; /* Vertical start of raw vbi data for second field */ + __u32 hsize1; /* Horizontal size of raw vbi data for second field */ + __u32 vsize1; /* Vertical size of raw vbi data for second field */ +}; + +/* structure for vpif parameters */ +struct vpif_interface { + __u8 storage_mode; /* Indicates field or frame mode */ + unsigned long hpitch; + v4l2_std_id stdid; +}; + +struct vpif_params { + struct vpif_interface video_params; + struct vpif_channel_config_params std_info; + union param { + struct vpif_vbi_params vbi_params; + struct vpif_capture_params_raw raw_params; + } params; +}; + +#endif /* End of #ifndef VPIF_H */ + diff --git a/linux/drivers/media/video/davinci/vpif_display.c b/linux/drivers/media/video/davinci/vpif_display.c new file mode 100644 index 000000000..969d4b3aa --- /dev/null +++ b/linux/drivers/media/video/davinci/vpif_display.c @@ -0,0 +1,1679 @@ +/* + * vpif-display - VPIF display driver + * Display driver for TI DaVinci VPIF + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/string.h> +#include <linux/videodev2.h> +#include <linux/wait.h> +#include <linux/time.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/version.h> + +#include <asm/irq.h> +#include <asm/page.h> + +#include <media/adv7343.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> + +#include <mach/dm646x.h> + +#include "vpif_display.h" +#include "vpif.h" + +MODULE_DESCRIPTION("TI DaVinci VPIF Display driver"); +MODULE_LICENSE("GPL"); + +#define DM646X_V4L2_STD (V4L2_STD_525_60 | V4L2_STD_625_50) + +#define vpif_err(fmt, arg...) v4l2_err(&vpif_obj.v4l2_dev, fmt, ## arg) +#define vpif_dbg(level, debug, fmt, arg...) \ + v4l2_dbg(level, debug, &vpif_obj.v4l2_dev, fmt, ## arg) + +static int debug = 1; +static u32 ch2_numbuffers = 3; +static u32 ch3_numbuffers = 3; +static u32 ch2_bufsize = 1920 * 1080 * 2; +static u32 ch3_bufsize = 720 * 576 * 2; + +module_param(debug, int, 0644); +module_param(ch2_numbuffers, uint, S_IRUGO); +module_param(ch3_numbuffers, uint, S_IRUGO); +module_param(ch2_bufsize, uint, S_IRUGO); +module_param(ch3_bufsize, uint, S_IRUGO); + +MODULE_PARM_DESC(debug, "Debug level 0-1"); +MODULE_PARM_DESC(ch2_numbuffers, "Channel2 buffer count (default:3)"); +MODULE_PARM_DESC(ch3_numbuffers, "Channel3 buffer count (default:3)"); +MODULE_PARM_DESC(ch2_bufsize, "Channel2 buffer size (default:1920 x 1080 x 2)"); +MODULE_PARM_DESC(ch3_bufsize, "Channel3 buffer size (default:720 x 576 x 2)"); + +static struct vpif_config_params config_params = { + .min_numbuffers = 3, + .numbuffers[0] = 3, + .numbuffers[1] = 3, + .min_bufsize[0] = 720 * 480 * 2, + .min_bufsize[1] = 720 * 480 * 2, + .channel_bufsize[0] = 1920 * 1080 * 2, + .channel_bufsize[1] = 720 * 576 * 2, +}; + +static struct vpif_device vpif_obj = { {NULL} }; +static struct device *vpif_dev; + +static const struct vpif_channel_config_params ch_params[] = { + { + "NTSC", 720, 480, 30, 0, 1, 268, 1440, 1, 23, 263, 266, + 286, 525, 525, 0, 1, 0, V4L2_STD_525_60, + }, + { + "PAL", 720, 576, 25, 0, 1, 280, 1440, 1, 23, 311, 313, + 336, 624, 625, 0, 1, 0, V4L2_STD_625_50, + }, +}; + +/* + * vpif_uservirt_to_phys: This function is used to convert user + * space virtual address to physical address. + */ +static u32 vpif_uservirt_to_phys(u32 virtp) +{ + struct mm_struct *mm = current->mm; + unsigned long physp = 0; + struct vm_area_struct *vma; + + vma = find_vma(mm, virtp); + + /* For kernel direct-mapped memory, take the easy way */ + if (virtp >= PAGE_OFFSET) { + physp = virt_to_phys((void *)virtp); + } else if (vma && (vma->vm_flags & VM_IO) && (vma->vm_pgoff)) { + /* this will catch, kernel-allocated, mmaped-to-usermode addr */ + physp = (vma->vm_pgoff << PAGE_SHIFT) + (virtp - vma->vm_start); + } else { + /* otherwise, use get_user_pages() for general userland pages */ + int res, nr_pages = 1; + struct page *pages; + down_read(¤t->mm->mmap_sem); + + res = get_user_pages(current, current->mm, + virtp, nr_pages, 1, 0, &pages, NULL); + up_read(¤t->mm->mmap_sem); + + if (res == nr_pages) { + physp = __pa(page_address(&pages[0]) + + (virtp & ~PAGE_MASK)); + } else { + vpif_err("get_user_pages failed\n"); + return 0; + } + } + + return physp; +} + +/* + * buffer_prepare: This is the callback function called from videobuf_qbuf() + * function the buffer is prepared and user space virtual address is converted + * into physical address + */ +static int vpif_buffer_prepare(struct videobuf_queue *q, + struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct vpif_fh *fh = q->priv_data; + struct common_obj *common; + unsigned long addr; + + common = &fh->channel->common[VPIF_VIDEO_INDEX]; + if (VIDEOBUF_NEEDS_INIT == vb->state) { + vb->width = common->width; + vb->height = common->height; + vb->size = vb->width * vb->height; + vb->field = field; + } + vb->state = VIDEOBUF_PREPARED; + + /* if user pointer memory mechanism is used, get the physical + * address of the buffer */ + if (V4L2_MEMORY_USERPTR == common->memory) { + if (!vb->baddr) { + vpif_err("buffer_address is 0\n"); + return -EINVAL; + } + + vb->boff = vpif_uservirt_to_phys(vb->baddr); + if (!ISALIGNED(vb->boff)) + goto buf_align_exit; + } + + addr = vb->boff; + if (q->streaming && (V4L2_BUF_TYPE_SLICED_VBI_OUTPUT != q->type)) { + if (!ISALIGNED(addr + common->ytop_off) || + !ISALIGNED(addr + common->ybtm_off) || + !ISALIGNED(addr + common->ctop_off) || + !ISALIGNED(addr + common->cbtm_off)) + goto buf_align_exit; + } + return 0; + +buf_align_exit: + vpif_err("buffer offset not aligned to 8 bytes\n"); + return -EINVAL; +} + +/* + * vpif_buffer_setup: This function allocates memory for the buffers + */ +static int vpif_buffer_setup(struct videobuf_queue *q, unsigned int *count, + unsigned int *size) +{ + struct vpif_fh *fh = q->priv_data; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + if (V4L2_MEMORY_MMAP != common->memory) + return 0; + + *size = config_params.channel_bufsize[ch->channel_id]; + if (*count < config_params.min_numbuffers) + *count = config_params.min_numbuffers; + + return 0; +} + +/* + * vpif_buffer_queue: This function adds the buffer to DMA queue + */ +static void vpif_buffer_queue(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + struct vpif_fh *fh = q->priv_data; + struct common_obj *common; + + common = &fh->channel->common[VPIF_VIDEO_INDEX]; + + /* add the buffer to the DMA queue */ + list_add_tail(&vb->queue, &common->dma_queue); + vb->state = VIDEOBUF_QUEUED; +} + +/* + * vpif_buffer_release: This function is called from the videobuf layer to + * free memory allocated to the buffers + */ +static void vpif_buffer_release(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + struct vpif_fh *fh = q->priv_data; + struct channel_obj *ch = fh->channel; + struct common_obj *common; + unsigned int buf_size = 0; + + common = &ch->common[VPIF_VIDEO_INDEX]; + + videobuf_dma_contig_free(q, vb); + vb->state = VIDEOBUF_NEEDS_INIT; + + if (V4L2_MEMORY_MMAP != common->memory) + return; + + buf_size = config_params.channel_bufsize[ch->channel_id]; +} + +static struct videobuf_queue_ops video_qops = { + .buf_setup = vpif_buffer_setup, + .buf_prepare = vpif_buffer_prepare, + .buf_queue = vpif_buffer_queue, + .buf_release = vpif_buffer_release, +}; +static u8 channel_first_int[VPIF_NUMOBJECTS][2] = { {1, 1} }; + +static void process_progressive_mode(struct common_obj *common) +{ + unsigned long addr = 0; + + /* Get the next buffer from buffer queue */ + common->next_frm = list_entry(common->dma_queue.next, + struct videobuf_buffer, queue); + /* Remove that buffer from the buffer queue */ + list_del(&common->next_frm->queue); + /* Mark status of the buffer as active */ + common->next_frm->state = VIDEOBUF_ACTIVE; + + /* Set top and bottom field addrs in VPIF registers */ + addr = videobuf_to_dma_contig(common->next_frm); + common->set_addr(addr + common->ytop_off, + addr + common->ybtm_off, + addr + common->ctop_off, + addr + common->cbtm_off); +} + +static void process_interlaced_mode(int fid, struct common_obj *common) +{ + /* device field id and local field id are in sync */ + /* If this is even field */ + if (0 == fid) { + if (common->cur_frm == common->next_frm) + return; + + /* one frame is displayed If next frame is + * available, release cur_frm and move on */ + /* Copy frame display time */ + do_gettimeofday(&common->cur_frm->ts); + /* Change status of the cur_frm */ + common->cur_frm->state = VIDEOBUF_DONE; + /* unlock semaphore on cur_frm */ + wake_up_interruptible(&common->cur_frm->done); + /* Make cur_frm pointing to next_frm */ + common->cur_frm = common->next_frm; + + } else if (1 == fid) { /* odd field */ + if (list_empty(&common->dma_queue) + || (common->cur_frm != common->next_frm)) { + return; + } + /* one field is displayed configure the next + * frame if it is available else hold on current + * frame */ + /* Get next from the buffer queue */ + process_progressive_mode(common); + + } +} + +/* + * vpif_channel_isr: It changes status of the displayed buffer, takes next + * buffer from the queue and sets its address in VPIF registers + */ +static irqreturn_t vpif_channel_isr(int irq, void *dev_id) +{ + struct vpif_device *dev = &vpif_obj; + struct channel_obj *ch; + struct common_obj *common; + enum v4l2_field field; + int fid = -1, i; + int channel_id = 0; + + channel_id = *(int *)(dev_id); + ch = dev->dev[channel_id]; + field = ch->common[VPIF_VIDEO_INDEX].fmt.fmt.pix.field; + for (i = 0; i < VPIF_NUMOBJECTS; i++) { + common = &ch->common[i]; + /* If streaming is started in this channel */ + if (0 == common->started) + continue; + + if (1 == ch->vpifparams.std_info.frm_fmt) { + if (list_empty(&common->dma_queue)) + continue; + + /* Progressive mode */ + if (!channel_first_int[i][channel_id]) { + /* Mark status of the cur_frm to + * done and unlock semaphore on it */ + do_gettimeofday(&common->cur_frm->ts); + common->cur_frm->state = VIDEOBUF_DONE; + wake_up_interruptible(&common->cur_frm->done); + /* Make cur_frm pointing to next_frm */ + common->cur_frm = common->next_frm; + } + + channel_first_int[i][channel_id] = 0; + process_progressive_mode(common); + } else { + /* Interlaced mode */ + /* If it is first interrupt, ignore it */ + + if (channel_first_int[i][channel_id]) { + channel_first_int[i][channel_id] = 0; + continue; + } + + if (0 == i) { + ch->field_id ^= 1; + /* Get field id from VPIF registers */ + fid = vpif_channel_getfid(ch->channel_id + 2); + /* If fid does not match with stored field id */ + if (fid != ch->field_id) { + /* Make them in sync */ + if (0 == fid) + ch->field_id = fid; + + return IRQ_HANDLED; + } + } + process_interlaced_mode(fid, common); + } + } + + return IRQ_HANDLED; +} + +static int vpif_get_std_info(struct channel_obj *ch) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct video_obj *vid_ch = &ch->video; + struct vpif_params *vpifparams = &ch->vpifparams; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; + const struct vpif_channel_config_params *config; + + int index; + + std_info->stdid = vid_ch->stdid; + if (!std_info) + return -1; + + for (index = 0; index < ARRAY_SIZE(ch_params); index++) { + config = &ch_params[index]; + if (config->stdid & std_info->stdid) { + memcpy(std_info, config, sizeof(*config)); + break; + } + } + + if (index == ARRAY_SIZE(ch_params)) + return -1; + + common->fmt.fmt.pix.width = std_info->width; + common->fmt.fmt.pix.height = std_info->height; + vpif_dbg(1, debug, "Pixel details: Width = %d,Height = %d\n", + common->fmt.fmt.pix.width, common->fmt.fmt.pix.height); + + /* Set height and width paramateres */ + ch->common[VPIF_VIDEO_INDEX].height = std_info->height; + ch->common[VPIF_VIDEO_INDEX].width = std_info->width; + + return 0; +} + +/* + * vpif_calculate_offsets: This function calculates buffers offset for Y and C + * in the top and bottom field + */ +static void vpif_calculate_offsets(struct channel_obj *ch) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct vpif_params *vpifparams = &ch->vpifparams; + enum v4l2_field field = common->fmt.fmt.pix.field; + struct video_obj *vid_ch = &ch->video; + unsigned int hpitch, vpitch, sizeimage; + + if (V4L2_FIELD_ANY == common->fmt.fmt.pix.field) { + if (ch->vpifparams.std_info.frm_fmt) + vid_ch->buf_field = V4L2_FIELD_NONE; + else + vid_ch->buf_field = V4L2_FIELD_INTERLACED; + } else { + vid_ch->buf_field = common->fmt.fmt.pix.field; + } + + if (V4L2_MEMORY_USERPTR == common->memory) + sizeimage = common->fmt.fmt.pix.sizeimage; + else + sizeimage = config_params.channel_bufsize[ch->channel_id]; + + hpitch = common->fmt.fmt.pix.bytesperline; + vpitch = sizeimage / (hpitch * 2); + if ((V4L2_FIELD_NONE == vid_ch->buf_field) || + (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) { + common->ytop_off = 0; + common->ybtm_off = hpitch; + common->ctop_off = sizeimage / 2; + common->cbtm_off = sizeimage / 2 + hpitch; + } else if (V4L2_FIELD_SEQ_TB == vid_ch->buf_field) { + common->ytop_off = 0; + common->ybtm_off = sizeimage / 4; + common->ctop_off = sizeimage / 2; + common->cbtm_off = common->ctop_off + sizeimage / 4; + } else if (V4L2_FIELD_SEQ_BT == vid_ch->buf_field) { + common->ybtm_off = 0; + common->ytop_off = sizeimage / 4; + common->cbtm_off = sizeimage / 2; + common->ctop_off = common->cbtm_off + sizeimage / 4; + } + + if ((V4L2_FIELD_NONE == vid_ch->buf_field) || + (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) { + vpifparams->video_params.storage_mode = 1; + } else { + vpifparams->video_params.storage_mode = 0; + } + + if (ch->vpifparams.std_info.frm_fmt == 1) { + vpifparams->video_params.hpitch = + common->fmt.fmt.pix.bytesperline; + } else { + if ((field == V4L2_FIELD_ANY) || + (field == V4L2_FIELD_INTERLACED)) + vpifparams->video_params.hpitch = + common->fmt.fmt.pix.bytesperline * 2; + else + vpifparams->video_params.hpitch = + common->fmt.fmt.pix.bytesperline; + } + + ch->vpifparams.video_params.stdid = ch->vpifparams.std_info.stdid; +} + +static void vpif_config_format(struct channel_obj *ch) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + common->fmt.fmt.pix.field = V4L2_FIELD_ANY; + if (config_params.numbuffers[ch->channel_id] == 0) + common->memory = V4L2_MEMORY_USERPTR; + else + common->memory = V4L2_MEMORY_MMAP; + + common->fmt.fmt.pix.sizeimage = + config_params.channel_bufsize[ch->channel_id]; + common->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUV422P; + common->fmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT; +} + +static int vpif_check_format(struct channel_obj *ch, + struct v4l2_pix_format *pixfmt) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + enum v4l2_field field = pixfmt->field; + u32 sizeimage, hpitch, vpitch; + + if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P) + goto invalid_fmt_exit; + + if (!(VPIF_VALID_FIELD(field))) + goto invalid_fmt_exit; + + if (pixfmt->bytesperline <= 0) + goto invalid_pitch_exit; + + if (V4L2_MEMORY_USERPTR == common->memory) + sizeimage = pixfmt->sizeimage; + else + sizeimage = config_params.channel_bufsize[ch->channel_id]; + + if (vpif_get_std_info(ch)) { + vpif_err("Error getting the standard info\n"); + return -EINVAL; + } + + hpitch = pixfmt->bytesperline; + vpitch = sizeimage / (hpitch * 2); + + /* Check for valid value of pitch */ + if ((hpitch < ch->vpifparams.std_info.width) || + (vpitch < ch->vpifparams.std_info.height)) + goto invalid_pitch_exit; + + /* Check for 8 byte alignment */ + if (!ISALIGNED(hpitch)) { + vpif_err("invalid pitch alignment\n"); + return -EINVAL; + } + pixfmt->width = common->fmt.fmt.pix.width; + pixfmt->height = common->fmt.fmt.pix.height; + + return 0; + +invalid_fmt_exit: + vpif_err("invalid field format\n"); + return -EINVAL; + +invalid_pitch_exit: + vpif_err("invalid pitch\n"); + return -EINVAL; +} + +static void vpif_config_addr(struct channel_obj *ch, int muxmode) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + if (VPIF_CHANNEL3_VIDEO == ch->channel_id) { + common->set_addr = ch3_set_videobuf_addr; + } else { + if (2 == muxmode) + common->set_addr = ch2_set_videobuf_addr_yc_nmux; + else + common->set_addr = ch2_set_videobuf_addr; + } +} + +/* + * vpif_mmap: It is used to map kernel space buffers into user spaces + */ +static int vpif_mmap(struct file *filep, struct vm_area_struct *vma) +{ + struct vpif_fh *fh = filep->private_data; + struct common_obj *common = &fh->channel->common[VPIF_VIDEO_INDEX]; + + return videobuf_mmap_mapper(&common->buffer_queue, vma); +} + +/* + * vpif_poll: It is used for select/poll system call + */ +static unsigned int vpif_poll(struct file *filep, poll_table *wait) +{ + struct vpif_fh *fh = filep->private_data; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + if (common->started) + return videobuf_poll_stream(filep, &common->buffer_queue, wait); + + return 0; +} + +/* + * vpif_open: It creates object of file handle structure and stores it in + * private_data member of filepointer + */ +static int vpif_open(struct file *filep) +{ + struct video_device *vdev = video_devdata(filep); + struct channel_obj *ch = NULL; + struct vpif_fh *fh = NULL; + + ch = video_get_drvdata(vdev); + /* Allocate memory for the file handle object */ + fh = kmalloc(sizeof(struct vpif_fh), GFP_KERNEL); + if (fh == NULL) { + vpif_err("unable to allocate memory for file handle object\n"); + return -ENOMEM; + } + + /* store pointer to fh in private_data member of filep */ + filep->private_data = fh; + fh->channel = ch; + fh->initialized = 0; + if (!ch->initialized) { + fh->initialized = 1; + ch->initialized = 1; + memset(&ch->vpifparams, 0, sizeof(ch->vpifparams)); + } + + /* Increment channel usrs counter */ + atomic_inc(&ch->usrs); + /* Set io_allowed[VPIF_VIDEO_INDEX] member to false */ + fh->io_allowed[VPIF_VIDEO_INDEX] = 0; + /* Initialize priority of this instance to default priority */ + fh->prio = V4L2_PRIORITY_UNSET; + v4l2_prio_open(&ch->prio, &fh->prio); + + return 0; +} + +/* + * vpif_release: This function deletes buffer queue, frees the buffers and + * the vpif file handle + */ +static int vpif_release(struct file *filep) +{ + struct vpif_fh *fh = filep->private_data; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + + /* if this instance is doing IO */ + if (fh->io_allowed[VPIF_VIDEO_INDEX]) { + /* Reset io_usrs member of channel object */ + common->io_usrs = 0; + /* Disable channel */ + if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { + enable_channel2(0); + channel2_intr_enable(0); + } + if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) || + (2 == common->started)) { + enable_channel3(0); + channel3_intr_enable(0); + } + common->started = 0; + /* Free buffers allocated */ + videobuf_queue_cancel(&common->buffer_queue); + videobuf_mmap_free(&common->buffer_queue); + common->numbuffers = + config_params.numbuffers[ch->channel_id]; + } + + mutex_unlock(&common->lock); + + /* Decrement channel usrs counter */ + atomic_dec(&ch->usrs); + /* If this file handle has initialize encoder device, reset it */ + if (fh->initialized) + ch->initialized = 0; + + /* Close the priority */ + v4l2_prio_close(&ch->prio, &fh->prio); + filep->private_data = NULL; + fh->initialized = 0; + kfree(fh); + + return 0; +} + +/* functions implementing ioctls */ + +static int vpif_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct vpif_config *config = vpif_dev->platform_data; + + cap->version = VPIF_DISPLAY_VERSION_CODE; + cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; + strlcpy(cap->driver, "vpif display", sizeof(cap->driver)); + strlcpy(cap->bus_info, "Platform", sizeof(cap->bus_info)); + strlcpy(cap->card, config->card_name, sizeof(cap->card)); + + return 0; +} + +static int vpif_enum_fmt_vid_out(struct file *file, void *priv, + struct v4l2_fmtdesc *fmt) +{ + if (fmt->index != 0) { + vpif_err("Invalid format index\n"); + return -EINVAL; + } + + /* Fill in the information about format */ + fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + strcpy(fmt->description, "YCbCr4:2:2 YC Planar"); + fmt->pixelformat = V4L2_PIX_FMT_YUV422P; + + return 0; +} + +static int vpif_g_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + /* Check the validity of the buffer type */ + if (common->fmt.type != fmt->type) + return -EINVAL; + + /* Fill in the information about format */ + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + + if (vpif_get_std_info(ch)) { + vpif_err("Error getting the standard info\n"); + return -EINVAL; + } + + *fmt = common->fmt; + mutex_unlock(&common->lock); + return 0; +} + +static int vpif_s_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpif_fh *fh = priv; + struct v4l2_pix_format *pixfmt; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret = 0; + + if ((VPIF_CHANNEL2_VIDEO == ch->channel_id) + || (VPIF_CHANNEL3_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_dbg(1, debug, "Channel Busy\n"); + return -EBUSY; + } + + /* Check for the priority */ + ret = v4l2_prio_check(&ch->prio, &fh->prio); + if (0 != ret) + return ret; + fh->initialized = 1; + } + + if (common->started) { + vpif_dbg(1, debug, "Streaming in progress\n"); + return -EBUSY; + } + + pixfmt = &fmt->fmt.pix; + /* Check for valid field format */ + ret = vpif_check_format(ch, pixfmt); + if (ret) + return ret; + + /* store the pix format in the channel object */ + common->fmt.fmt.pix = *pixfmt; + /* store the format in the channel object */ + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + + common->fmt = *fmt; + mutex_unlock(&common->lock); + + return 0; +} + +static int vpif_try_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + int ret = 0; + + ret = vpif_check_format(ch, pixfmt); + if (ret) { + *pixfmt = common->fmt.fmt.pix; + pixfmt->sizeimage = pixfmt->width * pixfmt->height * 2; + } + + return ret; +} + +static int vpif_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbuf) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common; + enum v4l2_field field; + u8 index = 0; + int ret = 0; + + /* This file handle has not initialized the channel, + It is not allowed to do settings */ + if ((VPIF_CHANNEL2_VIDEO == ch->channel_id) + || (VPIF_CHANNEL3_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_err("Channel Busy\n"); + return -EBUSY; + } + } + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != reqbuf->type) + return -EINVAL; + + index = VPIF_VIDEO_INDEX; + + common = &ch->common[index]; + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + + if (common->fmt.type != reqbuf->type) { + ret = -EINVAL; + goto reqbuf_exit; + } + + if (0 != common->io_usrs) { + ret = -EBUSY; + goto reqbuf_exit; + } + + if (reqbuf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { + if (common->fmt.fmt.pix.field == V4L2_FIELD_ANY) + field = V4L2_FIELD_INTERLACED; + else + field = common->fmt.fmt.pix.field; + } else { + field = V4L2_VBI_INTERLACED; + } + + /* Initialize videobuf queue as per the buffer type */ + videobuf_queue_dma_contig_init(&common->buffer_queue, + &video_qops, NULL, + &common->irqlock, + reqbuf->type, field, + sizeof(struct videobuf_buffer), fh); + + /* Set io allowed member of file handle to TRUE */ + fh->io_allowed[index] = 1; + /* Increment io usrs member of channel object to 1 */ + common->io_usrs = 1; + /* Store type of memory requested in channel object */ + common->memory = reqbuf->memory; + INIT_LIST_HEAD(&common->dma_queue); + + /* Allocate buffers */ + ret = videobuf_reqbufs(&common->buffer_queue, reqbuf); + +reqbuf_exit: + mutex_unlock(&common->lock); + return ret; +} + +static int vpif_querybuf(struct file *file, void *priv, + struct v4l2_buffer *tbuf) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + if (common->fmt.type != tbuf->type) + return -EINVAL; + + return videobuf_querybuf(&common->buffer_queue, tbuf); +} + +static int vpif_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct v4l2_buffer tbuf = *buf; + struct videobuf_buffer *buf1; + unsigned long addr = 0; + unsigned long flags; + int ret = 0; + + if (common->fmt.type != tbuf.type) + return -EINVAL; + + if (!fh->io_allowed[VPIF_VIDEO_INDEX]) { + vpif_err("fh->io_allowed\n"); + return -EACCES; + } + + if (!(list_empty(&common->dma_queue)) || + (common->cur_frm != common->next_frm) || + !(common->started) || + (common->started && (0 == ch->field_id))) + return videobuf_qbuf(&common->buffer_queue, buf); + + /* bufferqueue is empty store buffer address in VPIF registers */ + mutex_lock(&common->buffer_queue.vb_lock); + buf1 = common->buffer_queue.bufs[tbuf.index]; + if (buf1->memory != tbuf.memory) { + vpif_err("invalid buffer type\n"); + goto qbuf_exit; + } + + if ((buf1->state == VIDEOBUF_QUEUED) || + (buf1->state == VIDEOBUF_ACTIVE)) { + vpif_err("invalid state\n"); + goto qbuf_exit; + } + + switch (buf1->memory) { + case V4L2_MEMORY_MMAP: + if (buf1->baddr == 0) + goto qbuf_exit; + break; + + case V4L2_MEMORY_USERPTR: + if (tbuf.length < buf1->bsize) + goto qbuf_exit; + + if ((VIDEOBUF_NEEDS_INIT != buf1->state) + && (buf1->baddr != tbuf.m.userptr)) + vpif_buffer_release(&common->buffer_queue, buf1); + buf1->baddr = tbuf.m.userptr; + break; + + default: + goto qbuf_exit; + } + + local_irq_save(flags); + ret = vpif_buffer_prepare(&common->buffer_queue, buf1, + common->buffer_queue.field); + if (ret < 0) { + local_irq_restore(flags); + goto qbuf_exit; + } + + buf1->state = VIDEOBUF_ACTIVE; + addr = buf1->boff; + common->next_frm = buf1; + if (tbuf.type != V4L2_BUF_TYPE_SLICED_VBI_OUTPUT) { + common->set_addr((addr + common->ytop_off), + (addr + common->ybtm_off), + (addr + common->ctop_off), + (addr + common->cbtm_off)); + } + + local_irq_restore(flags); + list_add_tail(&buf1->stream, &common->buffer_queue.stream); + mutex_unlock(&common->buffer_queue.vb_lock); + return 0; + +qbuf_exit: + mutex_unlock(&common->buffer_queue.vb_lock); + return -EINVAL; +} + +static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret = 0; + + if (!(*std_id & DM646X_V4L2_STD)) + return -EINVAL; + + if (common->started) { + vpif_err("streaming in progress\n"); + return -EBUSY; + } + + /* Call encoder subdevice function to set the standard */ + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + + ch->video.stdid = *std_id; + /* Get the information about the standard */ + if (vpif_get_std_info(ch)) { + vpif_err("Error getting the standard info\n"); + return -EINVAL; + } + + if ((ch->vpifparams.std_info.width * + ch->vpifparams.std_info.height * 2) > + config_params.channel_bufsize[ch->channel_id]) { + vpif_err("invalid std for this size\n"); + ret = -EINVAL; + goto s_std_exit; + } + + common->fmt.fmt.pix.bytesperline = common->fmt.fmt.pix.width; + /* Configure the default format information */ + vpif_config_format(ch); + + ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video, + s_std_output, *std_id); + if (ret < 0) { + vpif_err("Failed to set output standard\n"); + goto s_std_exit; + } + + ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, core, + s_std, *std_id); + if (ret < 0) + vpif_err("Failed to set standard for sub devices\n"); + +s_std_exit: + mutex_unlock(&common->lock); + return ret; +} + +static int vpif_g_std(struct file *file, void *priv, v4l2_std_id *std) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + *std = ch->video.stdid; + return 0; +} + +static int vpif_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + return videobuf_dqbuf(&common->buffer_queue, p, + (file->f_flags & O_NONBLOCK)); +} + +static int vpif_streamon(struct file *file, void *priv, + enum v4l2_buf_type buftype) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct channel_obj *oth_ch = vpif_obj.dev[!ch->channel_id]; + struct vpif_params *vpif = &ch->vpifparams; + struct vpif_config *vpif_config_data = + vpif_dev->platform_data; + unsigned long addr = 0; + int ret = 0; + + if (buftype != V4L2_BUF_TYPE_VIDEO_OUTPUT) { + vpif_err("buffer type not supported\n"); + return -EINVAL; + } + + if (!fh->io_allowed[VPIF_VIDEO_INDEX]) { + vpif_err("fh->io_allowed\n"); + return -EACCES; + } + + /* If Streaming is already started, return error */ + if (common->started) { + vpif_err("channel->started\n"); + return -EBUSY; + } + + if ((ch->channel_id == VPIF_CHANNEL2_VIDEO + && oth_ch->common[VPIF_VIDEO_INDEX].started && + ch->vpifparams.std_info.ycmux_mode == 0) + || ((ch->channel_id == VPIF_CHANNEL3_VIDEO) + && (2 == oth_ch->common[VPIF_VIDEO_INDEX].started))) { + vpif_err("other channel is using\n"); + return -EBUSY; + } + + ret = vpif_check_format(ch, &common->fmt.fmt.pix); + if (ret < 0) + return ret; + + /* Call videobuf_streamon to start streaming in videobuf */ + ret = videobuf_streamon(&common->buffer_queue); + if (ret < 0) { + vpif_err("videobuf_streamon\n"); + return ret; + } + + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + + /* If buffer queue is empty, return error */ + if (list_empty(&common->dma_queue)) { + vpif_err("buffer queue is empty\n"); + ret = -EIO; + goto streamon_exit; + } + + /* Get the next frame from the buffer queue */ + common->next_frm = common->cur_frm = + list_entry(common->dma_queue.next, + struct videobuf_buffer, queue); + + list_del(&common->cur_frm->queue); + /* Mark state of the current frame to active */ + common->cur_frm->state = VIDEOBUF_ACTIVE; + + /* Initialize field_id and started member */ + ch->field_id = 0; + common->started = 1; + if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) { + addr = common->cur_frm->boff; + /* Calculate the offset for Y and C data in the buffer */ + vpif_calculate_offsets(ch); + + if ((ch->vpifparams.std_info.frm_fmt && + ((common->fmt.fmt.pix.field != V4L2_FIELD_NONE) + && (common->fmt.fmt.pix.field != V4L2_FIELD_ANY))) + || (!ch->vpifparams.std_info.frm_fmt + && (common->fmt.fmt.pix.field == V4L2_FIELD_NONE))) { + vpif_err("conflict in field format and std format\n"); + ret = -EINVAL; + goto streamon_exit; + } + + /* clock settings */ + ret = + vpif_config_data->set_clock(ch->vpifparams.std_info.ycmux_mode, + ch->vpifparams.std_info.hd_sd); + if (ret < 0) { + vpif_err("can't set clock\n"); + goto streamon_exit; + } + + /* set the parameters and addresses */ + ret = vpif_set_video_params(vpif, ch->channel_id + 2); + if (ret < 0) + goto streamon_exit; + + common->started = ret; + vpif_config_addr(ch, ret); + common->set_addr((addr + common->ytop_off), + (addr + common->ybtm_off), + (addr + common->ctop_off), + (addr + common->cbtm_off)); + + /* Set interrupt for both the fields in VPIF + Register enable channel in VPIF register */ + if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { + channel2_intr_assert(); + channel2_intr_enable(1); + enable_channel2(1); + } + + if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) + || (common->started == 2)) { + channel3_intr_assert(); + channel3_intr_enable(1); + enable_channel3(1); + } + channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1; + } + +streamon_exit: + mutex_unlock(&common->lock); + return ret; +} + +static int vpif_streamoff(struct file *file, void *priv, + enum v4l2_buf_type buftype) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + + if (buftype != V4L2_BUF_TYPE_VIDEO_OUTPUT) { + vpif_err("buffer type not supported\n"); + return -EINVAL; + } + + if (!fh->io_allowed[VPIF_VIDEO_INDEX]) { + vpif_err("fh->io_allowed\n"); + return -EACCES; + } + + if (!common->started) { + vpif_err("channel->started\n"); + return -EINVAL; + } + + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + + if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) { + /* disable channel */ + if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { + enable_channel2(0); + channel2_intr_enable(0); + } + if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) || + (2 == common->started)) { + enable_channel3(0); + channel3_intr_enable(0); + } + } + + common->started = 0; + mutex_unlock(&common->lock); + + return videobuf_streamoff(&common->buffer_queue); +} + +static int vpif_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *crop) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != crop->type) + return -EINVAL; + + crop->bounds.left = crop->bounds.top = 0; + crop->defrect.left = crop->defrect.top = 0; + crop->defrect.height = crop->bounds.height = common->height; + crop->defrect.width = crop->bounds.width = common->width; + + return 0; +} + +static int vpif_enum_output(struct file *file, void *fh, + struct v4l2_output *output) +{ + + struct vpif_config *config = vpif_dev->platform_data; + + if (output->index >= config->output_count) { + vpif_dbg(1, debug, "Invalid output index\n"); + return -EINVAL; + } + + strcpy(output->name, config->output[output->index]); + output->type = V4L2_OUTPUT_TYPE_ANALOG; + output->std = DM646X_V4L2_STD; + + return 0; +} + +static int vpif_s_output(struct file *file, void *priv, unsigned int i) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret = 0; + + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + + if (common->started) { + vpif_err("Streaming in progress\n"); + ret = -EBUSY; + goto s_output_exit; + } + + ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video, + s_routing, 0, i, 0); + + if (ret < 0) + vpif_err("Failed to set output standard\n"); + + vid_ch->output_id = i; + +s_output_exit: + mutex_unlock(&common->lock); + return ret; +} + +static int vpif_g_output(struct file *file, void *priv, unsigned int *i) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + + *i = vid_ch->output_id; + + return 0; +} + +static int vpif_g_priority(struct file *file, void *priv, enum v4l2_priority *p) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + *p = v4l2_prio_max(&ch->prio); + + return 0; +} + +static int vpif_s_priority(struct file *file, void *priv, enum v4l2_priority p) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_prio_change(&ch->prio, &fh->prio, p); +} + +/* vpif display ioctl operations */ +static const struct v4l2_ioctl_ops vpif_ioctl_ops = { + .vidioc_querycap = vpif_querycap, + .vidioc_g_priority = vpif_g_priority, + .vidioc_s_priority = vpif_s_priority, + .vidioc_enum_fmt_vid_out = vpif_enum_fmt_vid_out, + .vidioc_g_fmt_vid_out = vpif_g_fmt_vid_out, + .vidioc_s_fmt_vid_out = vpif_s_fmt_vid_out, + .vidioc_try_fmt_vid_out = vpif_try_fmt_vid_out, + .vidioc_reqbufs = vpif_reqbufs, + .vidioc_querybuf = vpif_querybuf, + .vidioc_qbuf = vpif_qbuf, + .vidioc_dqbuf = vpif_dqbuf, + .vidioc_streamon = vpif_streamon, + .vidioc_streamoff = vpif_streamoff, + .vidioc_s_std = vpif_s_std, + .vidioc_g_std = vpif_g_std, + .vidioc_enum_output = vpif_enum_output, + .vidioc_s_output = vpif_s_output, + .vidioc_g_output = vpif_g_output, + .vidioc_cropcap = vpif_cropcap, +}; + +static const struct v4l2_file_operations vpif_fops = { + .owner = THIS_MODULE, + .open = vpif_open, + .release = vpif_release, + .ioctl = video_ioctl2, + .mmap = vpif_mmap, + .poll = vpif_poll +}; + +static struct video_device vpif_video_template = { + .name = "vpif", + .fops = &vpif_fops, + .minor = -1, + .ioctl_ops = &vpif_ioctl_ops, + .tvnorms = DM646X_V4L2_STD, + .current_norm = V4L2_STD_625_50, + +}; + +/*Configure the channels, buffer sizei, request irq */ +static int initialize_vpif(void) +{ + int free_channel_objects_index; + int free_buffer_channel_index; + int free_buffer_index; + int err = 0, i, j; + + /* Default number of buffers should be 3 */ + if ((ch2_numbuffers > 0) && + (ch2_numbuffers < config_params.min_numbuffers)) + ch2_numbuffers = config_params.min_numbuffers; + if ((ch3_numbuffers > 0) && + (ch3_numbuffers < config_params.min_numbuffers)) + ch3_numbuffers = config_params.min_numbuffers; + + /* Set buffer size to min buffers size if invalid buffer size is + * given */ + if (ch2_bufsize < config_params.min_bufsize[VPIF_CHANNEL2_VIDEO]) + ch2_bufsize = + config_params.min_bufsize[VPIF_CHANNEL2_VIDEO]; + if (ch3_bufsize < config_params.min_bufsize[VPIF_CHANNEL3_VIDEO]) + ch3_bufsize = + config_params.min_bufsize[VPIF_CHANNEL3_VIDEO]; + + config_params.numbuffers[VPIF_CHANNEL2_VIDEO] = ch2_numbuffers; + + if (ch2_numbuffers) { + config_params.channel_bufsize[VPIF_CHANNEL2_VIDEO] = + ch2_bufsize; + } + config_params.numbuffers[VPIF_CHANNEL3_VIDEO] = ch3_numbuffers; + + if (ch3_numbuffers) { + config_params.channel_bufsize[VPIF_CHANNEL3_VIDEO] = + ch3_bufsize; + } + + /* Allocate memory for six channel objects */ + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { + vpif_obj.dev[i] = + kmalloc(sizeof(struct channel_obj), GFP_KERNEL); + /* If memory allocation fails, return error */ + if (!vpif_obj.dev[i]) { + free_channel_objects_index = i; + err = -ENOMEM; + goto vpif_init_free_channel_objects; + } + } + + free_channel_objects_index = VPIF_DISPLAY_MAX_DEVICES; + free_buffer_channel_index = VPIF_DISPLAY_NUM_CHANNELS; + free_buffer_index = config_params.numbuffers[i - 1]; + + return 0; + +vpif_init_free_channel_objects: + for (j = 0; j < free_channel_objects_index; j++) + kfree(vpif_obj.dev[j]); + return err; +} + +/* + * vpif_probe: This function creates device entries by register itself to the + * V4L2 driver and initializes fields of each channel objects + */ +static __init int vpif_probe(struct platform_device *pdev) +{ + const struct subdev_info *subdevdata; + int i, j = 0, k, q, m, err = 0; + struct i2c_adapter *i2c_adap; + struct vpif_config *config; + struct common_obj *common; + struct channel_obj *ch; + struct video_device *vfd; + struct resource *res; + int subdev_count; + + vpif_dev = &pdev->dev; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + v4l2_err(vpif_dev->driver, + "Error getting platform resource\n"); + return -ENOENT; + } + + if (!request_mem_region(res->start, res->end - res->start + 1, + vpif_dev->driver->name)) { + v4l2_err(vpif_dev->driver, "VPIF: failed request_mem_region\n"); + return -ENXIO; + } + + vpif_base = ioremap_nocache(res->start, res->end - res->start + 1); + if (!vpif_base) { + v4l2_err(vpif_dev->driver, "Unable to ioremap VPIF reg\n"); + err = -ENXIO; + goto resource_exit; + } + + vpif_base_addr_init(vpif_base); + + initialize_vpif(); + + err = v4l2_device_register(vpif_dev, &vpif_obj.v4l2_dev); + if (err) { + v4l2_err(vpif_dev->driver, "Error registering v4l2 device\n"); + return err; + } + + k = 0; + while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, k))) { + for (i = res->start; i <= res->end; i++) { + if (request_irq(i, vpif_channel_isr, IRQF_DISABLED, + "DM646x_Display", + (void *)(&vpif_obj.dev[k]->channel_id))) { + err = -EBUSY; + goto vpif_int_err; + } + } + k++; + } + + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { + + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + + /* Allocate memory for video device */ + vfd = video_device_alloc(); + if (vfd == NULL) { + for (j = 0; j < i; j++) { + ch = vpif_obj.dev[j]; + video_device_release(ch->video_dev); + } + err = -ENOMEM; + goto video_dev_alloc_exit; + } + + /* Initialize field of video device */ + *vfd = vpif_video_template; + vfd->v4l2_dev = &vpif_obj.v4l2_dev; + vfd->release = video_device_release; + snprintf(vfd->name, sizeof(vfd->name), + "DM646x_VPIFDisplay_DRIVER_V%d.%d.%d", + (VPIF_DISPLAY_VERSION_CODE >> 16) & 0xff, + (VPIF_DISPLAY_VERSION_CODE >> 8) & 0xff, + (VPIF_DISPLAY_VERSION_CODE) & 0xff); + + /* Set video_dev to the video device */ + ch->video_dev = vfd; + } + + for (j = 0; j < VPIF_DISPLAY_MAX_DEVICES; j++) { + ch = vpif_obj.dev[j]; + /* Initialize field of the channel objects */ + atomic_set(&ch->usrs, 0); + for (k = 0; k < VPIF_NUMOBJECTS; k++) { + ch->common[k].numbuffers = 0; + common = &ch->common[k]; + common->io_usrs = 0; + common->started = 0; + spin_lock_init(&common->irqlock); + mutex_init(&common->lock); + common->numbuffers = 0; + common->set_addr = NULL; + common->ytop_off = common->ybtm_off = 0; + common->ctop_off = common->cbtm_off = 0; + common->cur_frm = common->next_frm = NULL; + memset(&common->fmt, 0, sizeof(common->fmt)); + common->numbuffers = config_params.numbuffers[k]; + + } + ch->initialized = 0; + ch->channel_id = j; + if (j < 2) + ch->common[VPIF_VIDEO_INDEX].numbuffers = + config_params.numbuffers[ch->channel_id]; + else + ch->common[VPIF_VIDEO_INDEX].numbuffers = 0; + + memset(&ch->vpifparams, 0, sizeof(ch->vpifparams)); + + /* Initialize prio member of channel object */ + v4l2_prio_init(&ch->prio); + ch->common[VPIF_VIDEO_INDEX].fmt.type = + V4L2_BUF_TYPE_VIDEO_OUTPUT; + + /* register video device */ + vpif_dbg(1, debug, "channel=%x,channel->video_dev=%x\n", + (int)ch, (int)&ch->video_dev); + + err = video_register_device(ch->video_dev, + VFL_TYPE_GRABBER, (j ? 3 : 2)); + if (err < 0) + goto probe_out; + + video_set_drvdata(ch->video_dev, ch); + } + + i2c_adap = i2c_get_adapter(1); + config = pdev->dev.platform_data; + subdev_count = config->subdev_count; + subdevdata = config->subdevinfo; + vpif_obj.sd = kmalloc(sizeof(struct v4l2_subdev *) * subdev_count, + GFP_KERNEL); + if (vpif_obj.sd == NULL) { + vpif_err("unable to allocate memory for subdevice pointers\n"); + err = -ENOMEM; + goto probe_out; + } + + for (i = 0; i < subdev_count; i++) { + vpif_obj.sd[i] = v4l2_i2c_new_probed_subdev(&vpif_obj.v4l2_dev, + i2c_adap, subdevdata[i].name, + subdevdata[i].name, + &subdevdata[i].addr); + if (!vpif_obj.sd[i]) { + vpif_err("Error registering v4l2 subdevice\n"); + goto probe_subdev_out; + } + + if (vpif_obj.sd[i]) + vpif_obj.sd[i]->grp_id = 1 << i; + } + + return 0; + +probe_subdev_out: + kfree(vpif_obj.sd); +probe_out: + for (k = 0; k < j; k++) { + ch = vpif_obj.dev[k]; + video_unregister_device(ch->video_dev); + video_device_release(ch->video_dev); + ch->video_dev = NULL; + } +vpif_int_err: + v4l2_device_unregister(&vpif_obj.v4l2_dev); + vpif_err("VPIF IRQ request failed\n"); + for (q = k; k >= 0; k--) { + for (m = i; m >= res->start; m--) + free_irq(m, (void *)(&vpif_obj.dev[k]->channel_id)); + res = platform_get_resource(pdev, IORESOURCE_IRQ, k-1); + m = res->end; + } +video_dev_alloc_exit: + iounmap(vpif_base); +resource_exit: + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, res->end - res->start + 1); + + return err; +} + +/* + * vpif_remove: It un-register channels from V4L2 driver + */ +static int vpif_remove(struct platform_device *device) +{ + struct channel_obj *ch; + int i; + + v4l2_device_unregister(&vpif_obj.v4l2_dev); + + /* un-register device */ + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) { + /* Get the pointer to the channel object */ + ch = vpif_obj.dev[i]; + /* Unregister video device */ + video_unregister_device(ch->video_dev); + + ch->video_dev = NULL; + } + + return 0; +} + +static struct platform_driver vpif_driver = { + .driver = { + .name = "vpif_display", + .owner = THIS_MODULE, + }, + .probe = vpif_probe, + .remove = vpif_remove, +}; + +static __init int vpif_init(void) +{ + return platform_driver_register(&vpif_driver); +} + +/* + * vpif_cleanup: This function un-registers device and driver to the kernel, + * frees requested irq handler and de-allocates memory allocated for channel + * objects. + */ +static void vpif_cleanup(void) +{ + struct platform_device *pdev; + struct resource *res; + int irq_num; + int i = 0; + + pdev = container_of(vpif_dev, struct platform_device, dev); + + while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, i))) { + for (irq_num = res->start; irq_num <= res->end; irq_num++) + free_irq(irq_num, + (void *)(&vpif_obj.dev[i]->channel_id)); + i++; + } + + iounmap(vpif_base); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, res->end - res->start + 1); + platform_driver_unregister(&vpif_driver); + kfree(vpif_obj.sd); + for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) + kfree(vpif_obj.dev[i]); +} + +module_init(vpif_init); +module_exit(vpif_cleanup); diff --git a/linux/drivers/media/video/davinci/vpif_display.h b/linux/drivers/media/video/davinci/vpif_display.h new file mode 100644 index 000000000..a2a7cd166 --- /dev/null +++ b/linux/drivers/media/video/davinci/vpif_display.h @@ -0,0 +1,175 @@ +/* + * DM646x display header file + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef DAVINCIHD_DISPLAY_H +#define DAVINCIHD_DISPLAY_H + +/* Header files */ +#include <linux/videodev2.h> +#include <linux/version.h> +#include <media/v4l2-common.h> +#include <media/v4l2-device.h> +#include <media/videobuf-core.h> +#include <media/videobuf-dma-contig.h> + +#include "vpif.h" + +/* Macros */ +#define VPIF_MAJOR_RELEASE (0) +#define VPIF_MINOR_RELEASE (0) +#define VPIF_BUILD (1) + +#define VPIF_DISPLAY_VERSION_CODE \ + ((VPIF_MAJOR_RELEASE << 16) | (VPIF_MINOR_RELEASE << 8) | VPIF_BUILD) + +#define VPIF_VALID_FIELD(field) \ + (((V4L2_FIELD_ANY == field) || (V4L2_FIELD_NONE == field)) || \ + (((V4L2_FIELD_INTERLACED == field) || (V4L2_FIELD_SEQ_TB == field)) || \ + (V4L2_FIELD_SEQ_BT == field))) + +#define VPIF_DISPLAY_MAX_DEVICES (2) +#define VPIF_SLICED_BUF_SIZE (256) +#define VPIF_SLICED_MAX_SERVICES (3) +#define VPIF_VIDEO_INDEX (0) +#define VPIF_VBI_INDEX (1) +#define VPIF_HBI_INDEX (2) + +/* Setting it to 1 as HBI/VBI support yet to be added , else 3*/ +#define VPIF_NUMOBJECTS (1) + +/* Macros */ +#define ISALIGNED(a) (0 == ((a) & 7)) + +/* enumerated data types */ +/* Enumerated data type to give id to each device per channel */ +enum vpif_channel_id { + VPIF_CHANNEL2_VIDEO = 0, /* Channel2 Video */ + VPIF_CHANNEL3_VIDEO, /* Channel3 Video */ +}; + +/* structures */ + +struct video_obj { + enum v4l2_field buf_field; + u32 latest_only; /* indicate whether to return + * most recent displayed frame only */ + v4l2_std_id stdid; /* Currently selected or default + * standard */ + u32 output_id; /* Current output id */ +}; + +struct vbi_obj { + int num_services; + struct vpif_vbi_params vbiparams; /* vpif parameters for the raw + * vbi data */ +}; + +struct common_obj { + /* Buffer specific parameters */ + u8 *fbuffers[VIDEO_MAX_FRAME]; /* List of buffer pointers for + * storing frames */ + u32 numbuffers; /* number of buffers */ + struct videobuf_buffer *cur_frm; /* Pointer pointing to current + * videobuf_buffer */ + struct videobuf_buffer *next_frm; /* Pointer pointing to next + * videobuf_buffer */ + enum v4l2_memory memory; /* This field keeps track of + * type of buffer exchange + * method user has selected */ + struct v4l2_format fmt; /* Used to store the format */ + struct videobuf_queue buffer_queue; /* Buffer queue used in + * video-buf */ + struct list_head dma_queue; /* Queue of filled frames */ + spinlock_t irqlock; /* Used in video-buf */ + + /* channel specific parameters */ + struct mutex lock; /* lock used to access this + * structure */ + u32 io_usrs; /* number of users performing + * IO */ + u8 started; /* Indicates whether streaming + * started */ + u32 ytop_off; /* offset of Y top from the + * starting of the buffer */ + u32 ybtm_off; /* offset of Y bottom from the + * starting of the buffer */ + u32 ctop_off; /* offset of C top from the + * starting of the buffer */ + u32 cbtm_off; /* offset of C bottom from the + * starting of the buffer */ + /* Function pointer to set the addresses */ + void (*set_addr) (unsigned long, unsigned long, + unsigned long, unsigned long); + u32 height; + u32 width; +}; + +struct channel_obj { + /* V4l2 specific parameters */ + struct video_device *video_dev; /* Identifies video device for + * this channel */ + struct v4l2_prio_state prio; /* Used to keep track of state of + * the priority */ + atomic_t usrs; /* number of open instances of + * the channel */ + u32 field_id; /* Indicates id of the field + * which is being displayed */ + u8 initialized; /* flag to indicate whether + * encoder is initialized */ + + enum vpif_channel_id channel_id;/* Identifies channel */ + struct vpif_params vpifparams; + struct common_obj common[VPIF_NUMOBJECTS]; + struct video_obj video; + struct vbi_obj vbi; +}; + +/* File handle structure */ +struct vpif_fh { + struct channel_obj *channel; /* pointer to channel object for + * opened device */ + u8 io_allowed[VPIF_NUMOBJECTS]; /* Indicates whether this file handle + * is doing IO */ + enum v4l2_priority prio; /* Used to keep track priority of + * this instance */ + u8 initialized; /* Used to keep track of whether this + * file handle has initialized + * channel or not */ +}; + +/* vpif device structure */ +struct vpif_device { + struct v4l2_device v4l2_dev; + struct channel_obj *dev[VPIF_DISPLAY_NUM_CHANNELS]; + struct v4l2_subdev **sd; + +}; + +struct vpif_config_params { + u32 min_bufsize[VPIF_DISPLAY_NUM_CHANNELS]; + u32 channel_bufsize[VPIF_DISPLAY_NUM_CHANNELS]; + u8 numbuffers[VPIF_DISPLAY_NUM_CHANNELS]; + u8 min_numbuffers; +}; + +/* Struct which keeps track of the line numbers for the sliced vbi service */ +struct vpif_service_line { + u16 service_id; + u16 service_line[2]; + u16 enc_service_id; + u8 bytestowrite; +}; + +#endif /* DAVINCIHD_DISPLAY_H */ diff --git a/linux/drivers/media/video/davinci/vpss.c b/linux/drivers/media/video/davinci/vpss.c new file mode 100644 index 000000000..6d709ca8c --- /dev/null +++ b/linux/drivers/media/video/davinci/vpss.c @@ -0,0 +1,301 @@ +/* + * Copyright (C) 2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * common vpss driver for all video drivers. + */ +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/compiler.h> +#include <linux/io.h> +#include <mach/hardware.h> +#include <media/davinci/vpss.h> + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("VPSS Driver"); +MODULE_AUTHOR("Texas Instruments"); + +/* DM644x defines */ +#define DM644X_SBL_PCR_VPSS (4) + +/* vpss BL register offsets */ +#define DM355_VPSSBL_CCDCMUX 0x1c +/* vpss CLK register offsets */ +#define DM355_VPSSCLK_CLKCTRL 0x04 +/* masks and shifts */ +#define VPSS_HSSISEL_SHIFT 4 + +/* + * vpss operations. Depends on platform. Not all functions are available + * on all platforms. The api, first check if a functio is available before + * invoking it. In the probe, the function ptrs are intialized based on + * vpss name. vpss name can be "dm355_vpss", "dm644x_vpss" etc. + */ +struct vpss_hw_ops { + /* enable clock */ + int (*enable_clock)(enum vpss_clock_sel clock_sel, int en); + /* select input to ccdc */ + void (*select_ccdc_source)(enum vpss_ccdc_source_sel src_sel); + /* clear wbl overlflow bit */ + int (*clear_wbl_overflow)(enum vpss_wbl_sel wbl_sel); +}; + +/* vpss configuration */ +struct vpss_oper_config { + __iomem void *vpss_bl_regs_base; + __iomem void *vpss_regs_base; + struct resource *r1; + resource_size_t len1; + struct resource *r2; + resource_size_t len2; + char vpss_name[32]; + spinlock_t vpss_lock; + struct vpss_hw_ops hw_ops; +}; + +static struct vpss_oper_config oper_cfg; + +/* register access routines */ +static inline u32 bl_regr(u32 offset) +{ + return __raw_readl(oper_cfg.vpss_bl_regs_base + offset); +} + +static inline void bl_regw(u32 val, u32 offset) +{ + __raw_writel(val, oper_cfg.vpss_bl_regs_base + offset); +} + +static inline u32 vpss_regr(u32 offset) +{ + return __raw_readl(oper_cfg.vpss_regs_base + offset); +} + +static inline void vpss_regw(u32 val, u32 offset) +{ + __raw_writel(val, oper_cfg.vpss_regs_base + offset); +} + +static void dm355_select_ccdc_source(enum vpss_ccdc_source_sel src_sel) +{ + bl_regw(src_sel << VPSS_HSSISEL_SHIFT, DM355_VPSSBL_CCDCMUX); +} + +int vpss_select_ccdc_source(enum vpss_ccdc_source_sel src_sel) +{ + if (!oper_cfg.hw_ops.select_ccdc_source) + return -1; + + dm355_select_ccdc_source(src_sel); + return 0; +} +EXPORT_SYMBOL(vpss_select_ccdc_source); + +static int dm644x_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel) +{ + u32 mask = 1, val; + + if (wbl_sel < VPSS_PCR_AEW_WBL_0 || + wbl_sel > VPSS_PCR_CCDC_WBL_O) + return -1; + + /* writing a 0 clear the overflow */ + mask = ~(mask << wbl_sel); + val = bl_regr(DM644X_SBL_PCR_VPSS) & mask; + bl_regw(val, DM644X_SBL_PCR_VPSS); + return 0; +} + +int vpss_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel) +{ + if (!oper_cfg.hw_ops.clear_wbl_overflow) + return -1; + + return oper_cfg.hw_ops.clear_wbl_overflow(wbl_sel); +} +EXPORT_SYMBOL(vpss_clear_wbl_overflow); + +/* + * dm355_enable_clock - Enable VPSS Clock + * @clock_sel: CLock to be enabled/disabled + * @en: enable/disable flag + * + * This is called to enable or disable a vpss clock + */ +static int dm355_enable_clock(enum vpss_clock_sel clock_sel, int en) +{ + unsigned long flags; + u32 utemp, mask = 0x1, shift = 0; + + switch (clock_sel) { + case VPSS_VPBE_CLOCK: + /* nothing since lsb */ + break; + case VPSS_VENC_CLOCK_SEL: + shift = 2; + break; + case VPSS_CFALD_CLOCK: + shift = 3; + break; + case VPSS_H3A_CLOCK: + shift = 4; + break; + case VPSS_IPIPE_CLOCK: + shift = 5; + break; + case VPSS_CCDC_CLOCK: + shift = 6; + break; + default: + printk(KERN_ERR "dm355_enable_clock:" + " Invalid selector: %d\n", clock_sel); + return -1; + } + + spin_lock_irqsave(&oper_cfg.vpss_lock, flags); + utemp = vpss_regr(DM355_VPSSCLK_CLKCTRL); + if (!en) + utemp &= ~(mask << shift); + else + utemp |= (mask << shift); + + vpss_regw(utemp, DM355_VPSSCLK_CLKCTRL); + spin_unlock_irqrestore(&oper_cfg.vpss_lock, flags); + return 0; +} + +int vpss_enable_clock(enum vpss_clock_sel clock_sel, int en) +{ + if (!oper_cfg.hw_ops.enable_clock) + return -1; + + return oper_cfg.hw_ops.enable_clock(clock_sel, en); +} +EXPORT_SYMBOL(vpss_enable_clock); + +static int __init vpss_probe(struct platform_device *pdev) +{ + int status, dm355 = 0; + + if (!pdev->dev.platform_data) { + dev_err(&pdev->dev, "no platform data\n"); + return -ENOENT; + } + strcpy(oper_cfg.vpss_name, pdev->dev.platform_data); + + if (!strcmp(oper_cfg.vpss_name, "dm355_vpss")) + dm355 = 1; + else if (strcmp(oper_cfg.vpss_name, "dm644x_vpss")) { + dev_err(&pdev->dev, "vpss driver not supported on" + " this platform\n"); + return -ENODEV; + } + + dev_info(&pdev->dev, "%s vpss probed\n", oper_cfg.vpss_name); + oper_cfg.r1 = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!oper_cfg.r1) + return -ENOENT; + + oper_cfg.len1 = oper_cfg.r1->end - oper_cfg.r1->start + 1; + + oper_cfg.r1 = request_mem_region(oper_cfg.r1->start, oper_cfg.len1, + oper_cfg.r1->name); + if (!oper_cfg.r1) + return -EBUSY; + + oper_cfg.vpss_bl_regs_base = ioremap(oper_cfg.r1->start, oper_cfg.len1); + if (!oper_cfg.vpss_bl_regs_base) { + status = -EBUSY; + goto fail1; + } + + if (dm355) { + oper_cfg.r2 = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!oper_cfg.r2) { + status = -ENOENT; + goto fail2; + } + oper_cfg.len2 = oper_cfg.r2->end - oper_cfg.r2->start + 1; + oper_cfg.r2 = request_mem_region(oper_cfg.r2->start, + oper_cfg.len2, + oper_cfg.r2->name); + if (!oper_cfg.r2) { + status = -EBUSY; + goto fail2; + } + + oper_cfg.vpss_regs_base = ioremap(oper_cfg.r2->start, + oper_cfg.len2); + if (!oper_cfg.vpss_regs_base) { + status = -EBUSY; + goto fail3; + } + } + + if (dm355) { + oper_cfg.hw_ops.enable_clock = dm355_enable_clock; + oper_cfg.hw_ops.select_ccdc_source = dm355_select_ccdc_source; + } else + oper_cfg.hw_ops.clear_wbl_overflow = dm644x_clear_wbl_overflow; + + spin_lock_init(&oper_cfg.vpss_lock); + dev_info(&pdev->dev, "%s vpss probe success\n", oper_cfg.vpss_name); + return 0; + +fail3: + release_mem_region(oper_cfg.r2->start, oper_cfg.len2); +fail2: + iounmap(oper_cfg.vpss_bl_regs_base); +fail1: + release_mem_region(oper_cfg.r1->start, oper_cfg.len1); + return status; +} + +static int vpss_remove(struct platform_device *pdev) +{ + iounmap(oper_cfg.vpss_bl_regs_base); + release_mem_region(oper_cfg.r1->start, oper_cfg.len1); + if (!strcmp(oper_cfg.vpss_name, "dm355_vpss")) { + iounmap(oper_cfg.vpss_regs_base); + release_mem_region(oper_cfg.r2->start, oper_cfg.len2); + } + return 0; +} + +static struct platform_driver vpss_driver = { + .driver = { + .name = "vpss", + .owner = THIS_MODULE, + }, + .remove = __devexit_p(vpss_remove), + .probe = vpss_probe, +}; + +static void vpss_exit(void) +{ + platform_driver_unregister(&vpss_driver); +} + +static int __init vpss_init(void) +{ + return platform_driver_register(&vpss_driver); +} +subsys_initcall(vpss_init); +module_exit(vpss_exit); diff --git a/linux/drivers/media/video/em28xx/Kconfig b/linux/drivers/media/video/em28xx/Kconfig index 16a5af30e..6524b493e 100644 --- a/linux/drivers/media/video/em28xx/Kconfig +++ b/linux/drivers/media/video/em28xx/Kconfig @@ -8,6 +8,8 @@ config VIDEO_EM28XX select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_MT9V011 if VIDEO_HELPER_CHIPS_AUTO + ---help--- This is a video4linux driver for Empia 28xx based TV cards. diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c index 5b89c1821..8a22caf01 100644 --- a/linux/drivers/media/video/em28xx/em28xx-cards.c +++ b/linux/drivers/media/video/em28xx/em28xx-cards.c @@ -122,6 +122,24 @@ static struct em28xx_reg_seq em2870_kworld_355u_digital[] = { }; #endif +/* Board - EM2882 Kworld 315U digital */ +static struct em28xx_reg_seq em2882_kworld_315u_digital[] = { + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM28XX_R08_GPIO, 0xfe, 0xff, 10}, + {EM2880_R04_GPO, 0x04, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 10}, + {EM28XX_R08_GPIO, 0x7e, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { + {EM2880_R04_GPO, 0x08, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 10}, + {EM2880_R04_GPO, 0x08, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 10}, + { -1, -1, -1, -1}, +}; + static struct em28xx_reg_seq kworld_330u_analog[] = { {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x00, 0xff, 10}, @@ -134,6 +152,38 @@ static struct em28xx_reg_seq kworld_330u_digital[] = { { -1, -1, -1, -1}, }; +/* Evga inDtube + GPIO0 - Enable digital power (s5h1409) - low to enable + GPIO1 - Enable analog power (tvp5150/emp202) - low to enable + GPIO4 - xc3028 reset + GOP3 - s5h1409 reset + */ +static struct em28xx_reg_seq evga_indtube_analog[] = { + {EM28XX_R08_GPIO, 0x79, 0xff, 60}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq evga_indtube_digital[] = { + {EM28XX_R08_GPIO, 0x7a, 0xff, 1}, + {EM2880_R04_GPO, 0x04, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 1}, + { -1, -1, -1, -1}, +}; + +/* Pinnacle Hybrid Pro eb1a:2881 */ +static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { + {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { + {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ + {EM2880_R04_GPO, 0x0c, 0xff, 1}, + { -1, -1, -1, -1}, +}; + + /* Callback for the most boards */ static struct em28xx_reg_seq default_tuner_gpio[] = { {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, @@ -168,18 +218,27 @@ static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { {EM28XX_R08_GPIO, 0xff, 0xff, 10}, { -1, -1, -1, -1}, }; + +static struct em28xx_reg_seq silvercrest_reg_seq[] = { + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM28XX_R08_GPIO, 0x01, 0xf7, 10}, + { -1, -1, -1, -1}, +}; + /* * Board definitions */ struct em28xx_board em28xx_boards[] = { [EM2750_BOARD_UNKNOWN] = { - .name = "Unknown EM2750/EM2751 webcam grabber", + .name = "EM2710/EM2750/EM2751 webcam grabber", .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, - .tuner_type = TUNER_ABSENT, /* This is a webcam */ + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, .amux = EM28XX_AMUX_VIDEO, + .gpio = silvercrest_reg_seq, } }, }, [EM2800_BOARD_UNKNOWN] = { @@ -201,13 +260,15 @@ struct em28xx_board em28xx_boards[] = { [EM2820_BOARD_UNKNOWN] = { .name = "Unknown EM2750/28xx video grabber", .tuner_type = TUNER_ABSENT, + .is_webcam = 1, /* To enable sensor probe */ }, [EM2750_BOARD_DLCW_130] = { /* Beijing Huaqi Information Digital Technology Co., Ltd */ .name = "Huaqi DLCW-130", .valid = EM28XX_BOARD_NOT_VALIDATED, .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, - .tuner_type = TUNER_ABSENT, /* This is a webcam */ + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, @@ -408,13 +469,25 @@ struct em28xx_board em28xx_boards[] = { [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { .name = "Videology 20K14XUSB USB2.0", .valid = EM28XX_BOARD_NOT_VALIDATED, - .tuner_type = TUNER_ABSENT, /* This is a webcam */ + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, .amux = EM28XX_AMUX_VIDEO, } }, }, + [EM2820_BOARD_SILVERCREST_WEBCAM] = { + .name = "Silvercrest Webcam 1.3mpix", + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = silvercrest_reg_seq, + } }, + }, [EM2821_BOARD_SUPERCOMP_USB_2] = { .name = "Supercomp USB 2.0 TV", .valid = EM28XX_BOARD_NOT_VALIDATED, @@ -456,7 +529,8 @@ struct em28xx_board em28xx_boards[] = { /* Beijing Huaqi Information Digital Technology Co., Ltd */ .name = "NetGMBH Cam", .valid = EM28XX_BOARD_NOT_VALIDATED, - .tuner_type = TUNER_ABSENT, /* This is a webcam */ + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, .input = { { .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, @@ -827,7 +901,7 @@ struct em28xx_board em28xx_boards[] = { .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, .has_dvb = 1, - .dvb_gpio = default_analog, + .dvb_gpio = default_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, @@ -1160,6 +1234,38 @@ struct em28xx_board em28xx_boards[] = { .gpio = default_analog, } }, }, + [EM2882_BOARD_KWORLD_ATSC_315U] = { + .name = "KWorld ATSC 315U HDTV TV Box", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_THOMSON_DTT761X, + .tuner_gpio = em2882_kworld_315u_tuner_gpio, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .has_dvb = 1, + .dvb_gpio = em2882_kworld_315u_digital, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, + /* Analog mode - still not ready */ + /*.input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_VIDEO, + .gpio = em2882_kworld_315u_analog, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, + }, { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = em2882_kworld_315u_analog1, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = em2882_kworld_315u_analog1, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, + } }, */ + }, [EM2880_BOARD_EMPIRE_DUAL_TV] = { .name = "Empire dual TV", .tuner_type = TUNER_XC2028, @@ -1214,29 +1320,26 @@ struct em28xx_board em28xx_boards[] = { }, [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { .name = "Pinnacle Hybrid Pro", - .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, -#if 0 /* FIXME: add an entry at em28xx-dvb */ .has_dvb = 1, - .dvb_gpio = default_digital, -#endif + .dvb_gpio = pinnacle_hybrid_pro_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_VIDEO, - .gpio = default_analog, + .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, - .gpio = default_analog, + .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, - .gpio = default_analog, + .gpio = pinnacle_hybrid_pro_analog, } }, }, [EM2882_BOARD_PINNACLE_HYBRID_PRO] = { @@ -1464,6 +1567,33 @@ struct em28xx_board em28xx_boards[] = { .gpio = terratec_av350_unmute_gpio, } }, }, + [EM2882_BOARD_EVGA_INDTUBE] = { + .name = "Evga inDtube", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = evga_indtube_digital, + .ir_codes = ir_codes_evga_indtube, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = evga_indtube_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = evga_indtube_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = evga_indtube_analog, + } }, + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -1501,6 +1631,8 @@ struct usb_device_id em28xx_id_table[] = { { USB_DEVICE(0xeb1a, 0xe310), .driver_info = EM2880_BOARD_KWORLD_DVB_310U }, #endif + { USB_DEVICE(0xeb1a, 0xa313), + .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, { USB_DEVICE(0xeb1a, 0xa316), .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, { USB_DEVICE(0xeb1a, 0xe320), @@ -1575,6 +1707,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, { USB_DEVICE(0x04bb, 0x0515), .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, + { USB_DEVICE(0xeb1a, 0x50a6), + .driver_info = EM2860_BOARD_GADMEI_UTV330 }, { }, }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); @@ -1588,6 +1722,8 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = { {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, {0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, + {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, + {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, }; /* I2C devicelist hash table for devices with generic USB IDs */ @@ -1610,6 +1746,11 @@ static unsigned short tvp5150_addrs[] = { I2C_CLIENT_END }; +static unsigned short mt9v011_addrs[] = { + 0xba >> 1, + I2C_CLIENT_END +}; + static unsigned short msp3400_addrs[] = { 0x80 >> 1, 0x88 >> 1, @@ -1649,6 +1790,95 @@ static inline void em28xx_set_model(struct em28xx *dev) EM28XX_I2C_FREQ_100_KHZ; } +/* FIXME: Should be replaced by a proper mt9m001 driver */ +static int em28xx_initialize_mt9m001(struct em28xx *dev) +{ + int i; + unsigned char regs[][3] = { + { 0x0d, 0x00, 0x01, }, + { 0x0d, 0x00, 0x00, }, + { 0x04, 0x05, 0x00, }, /* hres = 1280 */ + { 0x03, 0x04, 0x00, }, /* vres = 1024 */ + { 0x20, 0x11, 0x00, }, + { 0x06, 0x00, 0x10, }, + { 0x2b, 0x00, 0x24, }, + { 0x2e, 0x00, 0x24, }, + { 0x35, 0x00, 0x24, }, + { 0x2d, 0x00, 0x20, }, + { 0x2c, 0x00, 0x20, }, + { 0x09, 0x0a, 0xd4, }, + { 0x35, 0x00, 0x57, }, + }; + + for (i = 0; i < ARRAY_SIZE(regs); i++) + i2c_master_send(&dev->i2c_client, ®s[i][0], 3); + + return 0; +} + +/* HINT method: webcam I2C chips + * + * This method work for webcams with Micron sensors + */ +static int em28xx_hint_sensor(struct em28xx *dev) +{ + int rc; + char *sensor_name; + unsigned char cmd; + __be16 version_be; + u16 version; + + dev->i2c_client.addr = 0xba >> 1; + cmd = 0; + i2c_master_send(&dev->i2c_client, &cmd, 1); + rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2); + if (rc != 2) + return -EINVAL; + + version = be16_to_cpu(version_be); + + switch (version) { + case 0x8243: /* mt9v011 640x480 1.3 Mpix sensor */ + dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; + sensor_name = "mt9v011"; + dev->em28xx_sensor = EM28XX_MT9V011; + dev->sensor_xres = 640; + dev->sensor_yres = 480; + dev->sensor_xtal = 6300000; + + /* probably means GRGB 16 bit bayer */ + dev->vinmode = 0x0d; + dev->vinctl = 0x00; + + break; +#if 0 + case 0x8411: + case 0x8421: +#endif + case 0x8431: + dev->model = EM2750_BOARD_UNKNOWN; + sensor_name = "mt9m001"; + dev->em28xx_sensor = EM28XX_MT9M001; + em28xx_initialize_mt9m001(dev); + dev->sensor_xres = 1280; + dev->sensor_yres = 1024; + + /* probably means BGGR 16 bit bayer */ + dev->vinmode = 0x0c; + dev->vinctl = 0x00; + + break; + default: + printk("Unknown Micron Sensor 0x%04x\n", be16_to_cpu(version)); + return -EINVAL; + } + + em28xx_errdev("Sensor is %s, using model %s entry.\n", + sensor_name, em28xx_boards[dev->model].name); + + return 0; +} + /* Since em28xx_pre_card_setup() requires a proper dev->model, * this won't work for boards with generic PCI IDs */ @@ -1677,7 +1907,7 @@ void em28xx_pre_card_setup(struct em28xx *dev) em28xx_info("chip ID is em2750\n"); break; case CHIP_ID_EM2820: - em28xx_info("chip ID is em2820\n"); + em28xx_info("chip ID is em2710 or em2820\n"); break; case CHIP_ID_EM2840: em28xx_info("chip ID is em2840\n"); @@ -1770,6 +2000,17 @@ void em28xx_pre_card_setup(struct em28xx *dev) em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); break; + case EM2882_BOARD_KWORLD_ATSC_315U: + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff); + msleep(10); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); + msleep(10); + em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); + msleep(10); + em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); + msleep(10); + break; + case EM2860_BOARD_KAIOMY_TVNPC_U2: em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); @@ -1820,6 +2061,7 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) ctl->demod = XC3028_FE_ZARLINK456; break; case EM2880_BOARD_TERRATEC_HYBRID_XS: + case EM2881_BOARD_PINNACLE_HYBRID_PRO: ctl->demod = XC3028_FE_ZARLINK456; break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: @@ -1840,6 +2082,10 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) ctl->demod = XC3028_FE_CHINA; ctl->fname = XC2028_DEFAULT_FIRMWARE; break; + case EM2882_BOARD_EVGA_INDTUBE: + ctl->demod = XC3028_FE_CHINA; + ctl->fname = XC3028L_DEFAULT_FIRMWARE; + break; default: ctl->demod = XC3028_FE_OREN538; } @@ -2081,6 +2327,9 @@ void em28xx_card_setup(struct em28xx *dev) if (em28xx_boards[dev->model].tuner_addr) dev->tuner_addr = em28xx_boards[dev->model].tuner_addr; + if (em28xx_boards[dev->model].tda9887_conf) + dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf; + /* request some modules */ switch (dev->model) { case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: @@ -2110,6 +2359,12 @@ void em28xx_card_setup(struct em28xx *dev) #endif break; } + case EM2882_BOARD_KWORLD_ATSC_315U: + em28xx_write_reg(dev, 0x0d, 0x42); + msleep(10); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); + msleep(10); + break; case EM2820_BOARD_KWORLD_PVRTV2800RF: /* GPIO enables sound on KWORLD PVR TV 2800RF */ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9); @@ -2132,7 +2387,18 @@ void em28xx_card_setup(struct em28xx *dev) case EM2880_BOARD_MSI_DIGIVOX_AD: if (!em28xx_hint_board(dev)) em28xx_set_model(dev); + + /* In cases where we had to use a board hint, the call to + em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, + so make the call now so the analog GPIOs are set properly + before probing the i2c bus. */ + em28xx_gpio_set(dev, dev->board.tuner_gpio); + em28xx_set_mode(dev, EM28XX_ANALOG_MODE); break; + case EM2820_BOARD_SILVERCREST_WEBCAM: + /* FIXME: need to document the registers bellow */ + em28xx_write_reg(dev, 0x0d, 0x42); + em28xx_write_reg(dev, 0x13, 0x08); } if (dev->board.has_snapshot_button) @@ -2164,6 +2430,21 @@ void em28xx_card_setup(struct em28xx *dev) v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvp5150", "tvp5150", tvp5150_addrs); + if (dev->em28xx_sensor == EM28XX_MT9V011) { + struct v4l2_subdev *sd; + + sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, + &dev->i2c_adap, "mt9v011", "mt9v011", mt9v011_addrs); + v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal); + } + +#if 0 + /* FIXME: use mt9m001 after their conversion to v4l dev/subdev */ + if (dev->em28xx_sensor == EM28XX_MT9M001) + v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "mt9m001", "mt9m001", mt9v011_addrs); +#endif + if (dev->board.adecoder == EM28XX_TVAUDIO) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvaudio", "tvaudio", dev->board.tvaudio_addr); @@ -2319,6 +2600,20 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, return errCode; } + /* + * Default format, used for tvp5150 or saa711x output formats + */ + dev->vinmode = 0x10; + dev->vinctl = 0x11; + + /* + * If the device can be a webcam, seek for a sensor. + * If sensor is not found, then it isn't a webcam. + */ + if (dev->board.is_webcam) + if (em28xx_hint_sensor(dev) < 0) + dev->board.is_webcam = 0; + /* Do board specific init and eeprom reading */ em28xx_card_setup(dev); @@ -2562,6 +2857,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, retval = em28xx_init_dev(&dev, udev, interface, nr); if (retval) { em28xx_devused &= ~(1<<dev->devno); + mutex_unlock(&dev->lock); kfree(dev); goto err; } diff --git a/linux/drivers/media/video/em28xx/em28xx-core.c b/linux/drivers/media/video/em28xx/em28xx-core.c index 02e51af9d..f24af40df 100644 --- a/linux/drivers/media/video/em28xx/em28xx-core.c +++ b/linux/drivers/media/video/em28xx/em28xx-core.c @@ -500,18 +500,21 @@ int em28xx_audio_setup(struct em28xx *dev) /* See how this device is configured */ cfg = em28xx_read_reg(dev, EM28XX_R00_CHIPCFG); - if (cfg < 0) + em28xx_info("Config register raw data: 0x%02x\n", cfg); + if (cfg < 0) { + /* Register read error? */ cfg = EM28XX_CHIPCFG_AC97; /* Be conservative */ - else - em28xx_info("Config register raw data: 0x%02x\n", cfg); - - if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == - EM28XX_CHIPCFG_I2S_3_SAMPRATES) { + } else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == 0x00) { + /* The device doesn't have vendor audio at all */ + dev->has_alsa_audio = 0; + dev->audio_mode.has_audio = 0; + return 0; + } else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == + EM28XX_CHIPCFG_I2S_3_SAMPRATES) { em28xx_info("I2S Audio (3 sample rates)\n"); dev->audio_mode.i2s_3rates = 1; - } - if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == - EM28XX_CHIPCFG_I2S_5_SAMPRATES) { + } else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == + EM28XX_CHIPCFG_I2S_5_SAMPRATES) { em28xx_info("I2S Audio (5 sample rates)\n"); dev->audio_mode.i2s_5rates = 1; } @@ -647,15 +650,15 @@ int em28xx_set_outfmt(struct em28xx *dev) int ret; ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT, - dev->format->reg | 0x20, 0x3f); + dev->format->reg | 0x20, 0xff); if (ret < 0) - return ret; + return ret; - ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, 0x10); + ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, dev->vinmode); if (ret < 0) return ret; - return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x11); + return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, dev->vinctl); } static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax, @@ -692,13 +695,16 @@ static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v) { u8 mode; /* the em2800 scaler only supports scaling down to 50% */ - if (dev->board.is_em2800) + + if (dev->board.is_em2800) { mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00); - else { + } else { u8 buf[2]; + buf[0] = h; buf[1] = h >> 8; em28xx_write_regs(dev, EM28XX_R30_HSCALELOW, (char *)buf, 2); + buf[0] = v; buf[1] = v >> 8; em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2); @@ -717,8 +723,11 @@ int em28xx_resolution_set(struct em28xx *dev) height = norm_maxh(dev) >> 1; em28xx_set_outfmt(dev); + + em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2); em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2); + return em28xx_scaler_set(dev, dev->hscale, dev->vscale); } diff --git a/linux/drivers/media/video/em28xx/em28xx-dvb.c b/linux/drivers/media/video/em28xx/em28xx-dvb.c index de919504f..e32267383 100644 --- a/linux/drivers/media/video/em28xx/em28xx-dvb.c +++ b/linux/drivers/media/video/em28xx/em28xx-dvb.c @@ -26,10 +26,14 @@ #include "em28xx.h" #include <media/v4l2-common.h> #include <media/videobuf-vmalloc.h> +#include <media/tuner.h> +#include "tuner-simple.h" #include "lgdt330x.h" #include "zl10353.h" #include "s5h1409.h" +#include "mt352.h" +#include "mt352_priv.h" /* FIXME */ MODULE_DESCRIPTION("driver for em28xx based DVB cards"); MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>"); @@ -242,6 +246,14 @@ static struct s5h1409_config em28xx_s5h1409_with_xc3028 = { .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK }; +static struct zl10353_config em28xx_zl10353_xc3028_no_i2c_gate = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .disable_i2c_gate_ctrl = 1, + .parallel_ts = 1, + .if2 = 45600, +}; + #ifdef EM28XX_DRX397XD_SUPPORT /* [TODO] djh - not sure yet what the device config needs to contain */ static struct drx397xD_config em28xx_drx397xD_with_xc3028 = { @@ -249,6 +261,41 @@ static struct drx397xD_config em28xx_drx397xD_with_xc3028 = { }; #endif +static int mt352_terratec_xs_init(struct dvb_frontend *fe) +{ + /* Values extracted from a USB trace of the Terratec Windows driver */ + static u8 clock_config[] = { CLOCK_CTL, 0x38, 0x2c }; + static u8 reset[] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg[] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg[] = { AGC_TARGET, 0x28, 0xa0 }; + static u8 input_freq_cfg[] = { INPUT_FREQ_1, 0x31, 0xb8 }; + static u8 rs_err_cfg[] = { RS_ERR_PER_1, 0x00, 0x4d }; + static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; + static u8 trl_nom_cfg[] = { TRL_NOMINAL_RATE_1, 0x64, 0x00 }; + static u8 tps_given_cfg[] = { TPS_GIVEN_1, 0x40, 0x80, 0x50 }; + static u8 tuner_go[] = { TUNER_GO, 0x01}; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, input_freq_cfg, sizeof(input_freq_cfg)); + mt352_write(fe, rs_err_cfg, sizeof(rs_err_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + mt352_write(fe, trl_nom_cfg, sizeof(trl_nom_cfg)); + mt352_write(fe, tps_given_cfg, sizeof(tps_given_cfg)); + mt352_write(fe, tuner_go, sizeof(tuner_go)); + return 0; +} + +static struct mt352_config terratec_xs_mt352_cfg = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, + .if2 = 45600, + .demod_init = mt352_terratec_xs_init, +}; + /* ------------------------------------------------------------------ */ static int attach_xc3028(u8 addr, struct em28xx *dev) @@ -431,8 +478,6 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; - case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: - case EM2880_BOARD_TERRATEC_HYBRID_XS: case EM2880_BOARD_KWORLD_DVB_310U: case EM2880_BOARD_EMPIRE_DUAL_TV: dvb->frontend = dvb_attach(zl10353_attach, @@ -443,7 +488,35 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: + dvb->frontend = dvb_attach(zl10353_attach, + &em28xx_zl10353_xc3028_no_i2c_gate, + &dev->i2c_adap); + if (attach_xc3028(0x61, dev) < 0) { + result = -EINVAL; + goto out_free; + } + break; + case EM2880_BOARD_TERRATEC_HYBRID_XS: + case EM2881_BOARD_PINNACLE_HYBRID_PRO: + dvb->frontend = dvb_attach(zl10353_attach, + &em28xx_zl10353_xc3028_no_i2c_gate, + &dev->i2c_adap); + if (dvb->frontend == NULL) { + /* This board could have either a zl10353 or a mt352. + If the chip id isn't for zl10353, try mt352 */ + dvb->frontend = dvb_attach(mt352_attach, + &terratec_xs_mt352_cfg, + &dev->i2c_adap); + } + + if (attach_xc3028(0x61, dev) < 0) { + result = -EINVAL; + goto out_free; + } + break; case EM2883_BOARD_KWORLD_HYBRID_330U: + case EM2882_BOARD_EVGA_INDTUBE: dvb->frontend = dvb_attach(s5h1409_attach, &em28xx_s5h1409_with_xc3028, &dev->i2c_adap); @@ -452,6 +525,18 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; + case EM2882_BOARD_KWORLD_ATSC_315U: + dvb->frontend = dvb_attach(lgdt330x_attach, + &em2880_lgdt3303_dev, + &dev->i2c_adap); + if (dvb->frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, dvb->frontend, + &dev->i2c_adap, 0x61, TUNER_THOMSON_DTT761X)) { + result = -EINVAL; + goto out_free; + } + } + break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: #ifdef EM28XX_DRX397XD_SUPPORT /* We don't have the config structure properly populated, so diff --git a/linux/drivers/media/video/em28xx/em28xx-i2c.c b/linux/drivers/media/video/em28xx/em28xx-i2c.c index 1cdd88361..91cff2af3 100644 --- a/linux/drivers/media/video/em28xx/em28xx-i2c.c +++ b/linux/drivers/media/video/em28xx/em28xx-i2c.c @@ -461,7 +461,7 @@ static struct i2c_algorithm em28xx_algo = { static struct i2c_adapter em28xx_adap_template = { .owner = THIS_MODULE, -#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 22) +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26) .class = I2C_CLASS_TV_ANALOG, #endif .name = "em28xx", @@ -489,7 +489,7 @@ static char *i2c_devs[128] = { [0xa0 >> 1] = "eeprom", [0xb0 >> 1] = "tda9874", [0xb8 >> 1] = "tvp5150a", - [0xba >> 1] = "tvp5150a", + [0xba >> 1] = "webcam sensor or tvp5150a", [0xc0 >> 1] = "tuner (analog)", [0xc2 >> 1] = "tuner (analog)", [0xc4 >> 1] = "tuner (analog)", diff --git a/linux/drivers/media/video/em28xx/em28xx-video.c b/linux/drivers/media/video/em28xx/em28xx-video.c index 63d21698c..1237e325d 100644 --- a/linux/drivers/media/video/em28xx/em28xx-video.c +++ b/linux/drivers/media/video/em28xx/em28xx-video.c @@ -90,16 +90,59 @@ MODULE_PARM_DESC(video_debug, "enable debug messages [video]"); /* supported video standards */ static struct em28xx_fmt format[] = { { - .name = "16bpp YUY2, 4:2:2, packed", + .name = "16 bpp YUY2, 4:2:2, packed", .fourcc = V4L2_PIX_FMT_YUYV, .depth = 16, .reg = EM28XX_OUTFMT_YUV422_Y0UY1V, + }, { + .name = "16 bpp RGB 565, LE", + .fourcc = V4L2_PIX_FMT_RGB565, + .depth = 16, + .reg = EM28XX_OUTFMT_RGB_16_656, + }, { + .name = "8 bpp Bayer BGBG..GRGR", + .fourcc = V4L2_PIX_FMT_SBGGR8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_BGBG, + }, { + .name = "8 bpp Bayer GRGR..BGBG", + .fourcc = V4L2_PIX_FMT_SGRBG8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_GRGR, + }, { + .name = "8 bpp Bayer GBGB..RGRG", + .fourcc = V4L2_PIX_FMT_SGBRG8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_GBGB, + }, { + .name = "12 bpp YUV411", + .fourcc = V4L2_PIX_FMT_YUV411P, + .depth = 12, + .reg = EM28XX_OUTFMT_YUV411, +#if 0 + /* TODO: Those formats need test and fourcc entries */ + }, { + .name = "Bayer, 8bit RGRG..GBGB", + .fourcc = 0, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_GBGB, + }, { + .name = "Y1-U-Y0-V, 16 bpp", + .fourcc = 0, + .depth = 16, + .reg = EM28XX_OUTFMT_YUV422_Y1UY0V + }, { + .name = "YUV211, 8 bpp", + .fourcc = 0, + .depth = 8, + .reg = EM28XX_OUTFMT_YUV211, +#endif }, }; /* supported controls */ /* Common to all boards */ -static struct v4l2_queryctrl em28xx_qctrl[] = { +static struct v4l2_queryctrl ac97_qctrl[] = { { .id = V4L2_CID_AUDIO_VOLUME, .type = V4L2_CTRL_TYPE_INTEGER, @@ -108,7 +151,7 @@ static struct v4l2_queryctrl em28xx_qctrl[] = { .maximum = 0x1f, .step = 0x1, .default_value = 0x1f, - .flags = 0, + .flags = V4L2_CTRL_FLAG_SLIDER, }, { .id = V4L2_CID_AUDIO_MUTE, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -579,10 +622,29 @@ static void res_free(struct em28xx_fh *fh) } /* - * em28xx_get_ctrl() - * return the current saturation, brightness or contrast, mute state + * ac97_queryctrl() + * return the ac97 supported controls + */ +static int ac97_queryctrl(struct v4l2_queryctrl *qc) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ac97_qctrl); i++) { + if (qc->id && qc->id == ac97_qctrl[i].id) { + memcpy(qc, &(ac97_qctrl[i]), sizeof(*qc)); + return 0; + } + } + + /* Control is not ac97 related */ + return 1; +} + +/* + * ac97_get_ctrl() + * return the current values for ac97 mute and volume */ -static int em28xx_get_ctrl(struct em28xx *dev, struct v4l2_control *ctrl) +static int ac97_get_ctrl(struct em28xx *dev, struct v4l2_control *ctrl) { switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -592,29 +654,41 @@ static int em28xx_get_ctrl(struct em28xx *dev, struct v4l2_control *ctrl) ctrl->value = dev->volume; return 0; default: - return -EINVAL; + /* Control is not ac97 related */ + return 1; } } /* - * em28xx_set_ctrl() - * mute or set new saturation, brightness or contrast + * ac97_set_ctrl() + * set values for ac97 mute and volume */ -static int em28xx_set_ctrl(struct em28xx *dev, const struct v4l2_control *ctrl) +static int ac97_set_ctrl(struct em28xx *dev, const struct v4l2_control *ctrl) { + int i; + + for (i = 0; i < ARRAY_SIZE(ac97_qctrl); i++) + if (ctrl->id == ac97_qctrl[i].id) + goto handle; + + /* Announce that hasn't handle it */ + return 1; + +handle: + if (ctrl->value < ac97_qctrl[i].minimum || + ctrl->value > ac97_qctrl[i].maximum) + return -ERANGE; + switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: - if (ctrl->value != dev->mute) { - dev->mute = ctrl->value; - return em28xx_audio_analog_set(dev); - } - return 0; + dev->mute = ctrl->value; + break; case V4L2_CID_AUDIO_VOLUME: dev->volume = ctrl->value; - return em28xx_audio_analog_set(dev); - default: - return -EINVAL; + break; } + + return em28xx_audio_analog_set(dev); } static int check_dev(struct em28xx *dev) @@ -636,8 +710,8 @@ static void get_scale(struct em28xx *dev, unsigned int width, unsigned int height, unsigned int *hscale, unsigned int *vscale) { - unsigned int maxw = norm_maxw(dev); - unsigned int maxh = norm_maxh(dev); + unsigned int maxw = norm_maxw(dev); + unsigned int maxh = norm_maxh(dev); *hscale = (((unsigned long)maxw) << 12) / width - 4096L; if (*hscale >= 0x4000) @@ -737,13 +811,34 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return 0; } +static int em28xx_set_video_format(struct em28xx *dev, unsigned int fourcc, + unsigned width, unsigned height) +{ + struct em28xx_fmt *fmt; + + fmt = format_by_fourcc(fourcc); + if (!fmt) + return -EINVAL; + + dev->format = fmt; + dev->width = width; + dev->height = height; + + /* set new image size */ + get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale); + + em28xx_set_alternate(dev); + em28xx_resolution_set(dev); + + return 0; +} + static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; int rc; - struct em28xx_fmt *fmt; rc = check_dev(dev); if (rc < 0) @@ -753,12 +848,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, vidioc_try_fmt_vid_cap(file, priv, f); - fmt = format_by_fourcc(f->fmt.pix.pixelformat); - if (!fmt) { - rc = -EINVAL; - goto out; - } - if (videobuf_queue_is_busy(&fh->vb_vidq)) { em28xx_errdev("%s queue busy\n", __func__); rc = -EBUSY; @@ -771,16 +860,8 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, goto out; } - /* set new image size */ - dev->width = f->fmt.pix.width; - dev->height = f->fmt.pix.height; - dev->format = fmt; - get_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale); - - em28xx_set_alternate(dev); - em28xx_resolution_set(dev); - - rc = 0; + rc = em28xx_set_video_format(dev, f->fmt.pix.pixelformat, + f->fmt.pix.width, f->fmt.pix.height); out: mutex_unlock(&dev->lock); @@ -965,7 +1046,6 @@ static int vidioc_queryctrl(struct file *file, void *priv, struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; int id = qc->id; - int i; int rc; rc = check_dev(dev); @@ -976,15 +1056,14 @@ static int vidioc_queryctrl(struct file *file, void *priv, qc->id = id; - if (!dev->board.has_msp34xx) { - for (i = 0; i < ARRAY_SIZE(em28xx_qctrl); i++) { - if (qc->id && qc->id == em28xx_qctrl[i].id) { - memcpy(qc, &(em28xx_qctrl[i]), sizeof(*qc)); - return 0; - } - } + /* enumberate AC97 controls */ + if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { + rc = ac97_queryctrl(qc); + if (!rc) + return 0; } + /* enumberate V4L2 device controls */ mutex_lock(&dev->lock); v4l2_device_call_all(&dev->v4l2_dev, 0, core, queryctrl, qc); mutex_unlock(&dev->lock); @@ -1009,14 +1088,16 @@ static int vidioc_g_ctrl(struct file *file, void *priv, mutex_lock(&dev->lock); - if (dev->board.has_msp34xx) + /* Set an AC97 control */ + if (dev->audio_mode.ac97 != EM28XX_NO_AC97) + rc = ac97_get_ctrl(dev, ctrl); + else + rc = 1; + + /* It were not an AC97 control. Sends it to the v4l2 dev interface */ + if (rc == 1) { v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_ctrl, ctrl); - else { - rc = em28xx_get_ctrl(dev, ctrl); - if (rc < 0) { - v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_ctrl, ctrl); - rc = 0; - } + rc = 0; } mutex_unlock(&dev->lock); @@ -1028,7 +1109,6 @@ static int vidioc_s_ctrl(struct file *file, void *priv, { struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; - u8 i; int rc; rc = check_dev(dev); @@ -1037,27 +1117,16 @@ static int vidioc_s_ctrl(struct file *file, void *priv, mutex_lock(&dev->lock); - if (dev->board.has_msp34xx) - v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_ctrl, ctrl); - else { + /* Set an AC97 control */ + if (dev->audio_mode.ac97 != EM28XX_NO_AC97) + rc = ac97_set_ctrl(dev, ctrl); + else rc = 1; - for (i = 0; i < ARRAY_SIZE(em28xx_qctrl); i++) { - if (ctrl->id == em28xx_qctrl[i].id) { - if (ctrl->value < em28xx_qctrl[i].minimum || - ctrl->value > em28xx_qctrl[i].maximum) { - rc = -ERANGE; - break; - } - - rc = em28xx_set_ctrl(dev, ctrl); - break; - } - } - } - /* Control not found - try to send it to the attached devices */ + /* It were not an AC97 control. Sends it to the v4l2 dev interface */ if (rc == 1) { v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_ctrl, ctrl); + /* FIXME: should be returning a meaninful value */ rc = 0; } @@ -1618,9 +1687,9 @@ static int radio_queryctrl(struct file *file, void *priv, qc->id >= V4L2_CID_LASTP1) return -EINVAL; - for (i = 0; i < ARRAY_SIZE(em28xx_qctrl); i++) { - if (qc->id && qc->id == em28xx_qctrl[i].id) { - memcpy(qc, &(em28xx_qctrl[i]), sizeof(*qc)); + for (i = 0; i < ARRAY_SIZE(ac97_qctrl); i++) { + if (qc->id && qc->id == ac97_qctrl[i].id) { + memcpy(qc, &(ac97_qctrl[i]), sizeof(*qc)); return 0; } } @@ -1671,11 +1740,6 @@ static int em28xx_v4l2_open(struct file *filp) filp->private_data = fh; if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) { - dev->width = norm_maxw(dev); - dev->height = norm_maxh(dev); - dev->hscale = 0; - dev->vscale = 0; - em28xx_set_mode(dev, EM28XX_ANALOG_MODE); em28xx_set_alternate(dev); em28xx_resolution_set(dev); @@ -2029,15 +2093,14 @@ int em28xx_register_analog_devices(struct em28xx *dev) /* set default norm */ dev->norm = em28xx_video_template.current_norm; - dev->width = norm_maxw(dev); - dev->height = norm_maxh(dev); dev->interlaced = EM28XX_INTERLACED_DEFAULT; - dev->hscale = 0; - dev->vscale = 0; dev->ctl_input = 0; /* Analog specific initialization */ dev->format = &format[0]; + em28xx_set_video_format(dev, format[0].fourcc, + norm_maxw(dev), norm_maxh(dev)); + video_mux(dev, dev->ctl_input); /* Audio defaults */ diff --git a/linux/drivers/media/video/em28xx/em28xx.h b/linux/drivers/media/video/em28xx/em28xx.h index db07d92f6..df7fe9af7 100644 --- a/linux/drivers/media/video/em28xx/em28xx.h +++ b/linux/drivers/media/video/em28xx/em28xx.h @@ -106,6 +106,9 @@ #define EM2880_BOARD_EMPIRE_DUAL_TV 66 #define EM2860_BOARD_TERRATEC_GRABBY 67 #define EM2860_BOARD_TERRATEC_AV350 68 +#define EM2882_BOARD_KWORLD_ATSC_315U 69 +#define EM2882_BOARD_EVGA_INDTUBE 70 +#define EM2820_BOARD_SILVERCREST_WEBCAM 71 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 @@ -356,11 +359,17 @@ struct em28xx_input { #define INPUT(nr) (&em28xx_boards[dev->model].input[nr]) enum em28xx_decoder { - EM28XX_NODECODER, + EM28XX_NODECODER = 0, EM28XX_TVP5150, EM28XX_SAA711X, }; +enum em28xx_sensor { + EM28XX_NOSENSOR = 0, + EM28XX_MT9V011, + EM28XX_MT9M001, +}; + enum em28xx_adecoder { EM28XX_NOADECODER = 0, EM28XX_TVAUDIO, @@ -387,6 +396,7 @@ struct em28xx_board { unsigned int max_range_640_480:1; unsigned int has_dvb:1; unsigned int has_snapshot_button:1; + unsigned int is_webcam:1; unsigned int valid:1; unsigned char xclk, i2c_speed; @@ -478,6 +488,14 @@ struct em28xx { struct v4l2_device v4l2_dev; struct em28xx_board board; + /* Webcam specific fields */ + enum em28xx_sensor em28xx_sensor; + int sensor_xres, sensor_yres; + int sensor_xtal; + + /* Vinmode/Vinctl used at the driver */ + int vinmode, vinctl; + unsigned int stream_on:1; /* Locks streams */ unsigned int has_audio_class:1; unsigned int has_alsa_audio:1; @@ -758,17 +776,23 @@ static inline int em28xx_gamma_set(struct em28xx *dev, s32 val) /*FIXME: maxw should be dependent of alt mode */ static inline unsigned int norm_maxw(struct em28xx *dev) { + if (dev->board.is_webcam) + return dev->sensor_xres; + if (dev->board.max_range_640_480) return 640; - else - return 720; + + return 720; } static inline unsigned int norm_maxh(struct em28xx *dev) { + if (dev->board.is_webcam) + return dev->sensor_yres; + if (dev->board.max_range_640_480) return 480; - else - return (dev->norm & V4L2_STD_625_50) ? 576 : 480; + + return (dev->norm & V4L2_STD_625_50) ? 576 : 480; } #endif diff --git a/linux/drivers/media/video/gspca/Kconfig b/linux/drivers/media/video/gspca/Kconfig index 578dc4ffc..34f46f2bc 100644 --- a/linux/drivers/media/video/gspca/Kconfig +++ b/linux/drivers/media/video/gspca/Kconfig @@ -102,6 +102,22 @@ config USB_GSPCA_PAC7311 To compile this driver as a module, choose M here: the module will be called gspca_pac7311. +config USB_GSPCA_SN9C20X + tristate "SN9C20X USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the + sn9c20x chips (SN9C201 and SN9C202). + + To compile this driver as a module, choose M here: the + module will be called gspca_sn9c20x. + +config USB_GSPCA_SN9C20X_EVDEV + bool "Enable evdev support" + depends on USB_GSPCA_SN9C20X + ---help--- + Say Y here in order to enable evdev support for sn9c20x webcam button. + config USB_GSPCA_SONIXB tristate "SONIX Bayer USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA diff --git a/linux/drivers/media/video/gspca/Makefile b/linux/drivers/media/video/gspca/Makefile index 8a6643e8e..f6d3b86e9 100644 --- a/linux/drivers/media/video/gspca/Makefile +++ b/linux/drivers/media/video/gspca/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_USB_GSPCA_OV519) += gspca_ov519.o obj-$(CONFIG_USB_GSPCA_OV534) += gspca_ov534.o obj-$(CONFIG_USB_GSPCA_PAC207) += gspca_pac207.o obj-$(CONFIG_USB_GSPCA_PAC7311) += gspca_pac7311.o +obj-$(CONFIG_USB_GSPCA_SN9C20X) += gspca_sn9c20x.o obj-$(CONFIG_USB_GSPCA_SONIXB) += gspca_sonixb.o obj-$(CONFIG_USB_GSPCA_SONIXJ) += gspca_sonixj.o obj-$(CONFIG_USB_GSPCA_SPCA500) += gspca_spca500.o @@ -35,6 +36,7 @@ gspca_ov519-objs := ov519.o gspca_ov534-objs := ov534.o gspca_pac207-objs := pac207.o gspca_pac7311-objs := pac7311.o +gspca_sn9c20x-objs := sn9c20x.o gspca_sonixb-objs := sonixb.o gspca_sonixj-objs := sonixj.o gspca_spca500-objs := spca500.o diff --git a/linux/drivers/media/video/gspca/conex.c b/linux/drivers/media/video/gspca/conex.c index 219cfa6fb..8d48ea174 100644 --- a/linux/drivers/media/video/gspca/conex.c +++ b/linux/drivers/media/video/gspca/conex.c @@ -846,6 +846,8 @@ static int sd_start(struct gspca_dev *gspca_dev) /* create the JPEG header */ sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); + if (!sd->jpeg_hdr) + return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x22); /* JPEG 411 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); diff --git a/linux/drivers/media/video/gspca/gspca.c b/linux/drivers/media/video/gspca/gspca.c index 3bf8b4866..eedf9a60c 100644 --- a/linux/drivers/media/video/gspca/gspca.c +++ b/linux/drivers/media/video/gspca/gspca.c @@ -51,7 +51,7 @@ MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>"); MODULE_DESCRIPTION("GSPCA USB Camera Driver"); MODULE_LICENSE("GPL"); -#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 6, 0) +#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 7, 0) #ifdef GSPCA_DEBUG int gspca_debug = D_ERR | D_PROBE; @@ -524,7 +524,10 @@ static int create_urbs(struct gspca_dev *gspca_dev, if (!gspca_dev->cam.bulk) { /* isoc */ /* See paragraph 5.9 / table 5-11 of the usb 2.0 spec. */ - psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); + if (gspca_dev->pkt_size == 0) + psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); + else + psize = gspca_dev->pkt_size; npkt = gspca_dev->cam.npkt; if (npkt == 0) npkt = 32; /* default value */ @@ -609,13 +612,18 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev) /* set the higher alternate setting and * loop until urb submit succeeds */ gspca_dev->alt = gspca_dev->nbalt; + if (gspca_dev->sd_desc->isoc_init) { + ret = gspca_dev->sd_desc->isoc_init(gspca_dev); + if (ret < 0) + goto out; + } + ep = get_ep(gspca_dev); + if (ep == NULL) { + ret = -EIO; + goto out; + } for (;;) { PDEBUG(D_STREAM, "init transfer alt %d", gspca_dev->alt); - ep = get_ep(gspca_dev); - if (ep == NULL) { - ret = -EIO; - goto out; - } ret = create_urbs(gspca_dev, ep); if (ret < 0) goto out; @@ -640,21 +648,32 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev) /* submit the URBs */ for (n = 0; n < gspca_dev->nurbs; n++) { ret = usb_submit_urb(gspca_dev->urb[n], GFP_KERNEL); - if (ret < 0) { - PDEBUG(D_ERR|D_STREAM, - "usb_submit_urb [%d] err %d", n, ret); - gspca_dev->streaming = 0; - destroy_urbs(gspca_dev); - if (ret == -ENOSPC) { - msleep(20); /* wait for kill - * complete */ - break; /* try the previous alt */ - } - goto out; - } + if (ret < 0) + break; } if (ret >= 0) break; + PDEBUG(D_ERR|D_STREAM, + "usb_submit_urb alt %d err %d", gspca_dev->alt, ret); + gspca_dev->streaming = 0; + destroy_urbs(gspca_dev); + if (ret != -ENOSPC) + goto out; + + /* the bandwidth is not wide enough + * negociate or try a lower alternate setting */ + msleep(20); /* wait for kill complete */ + if (gspca_dev->sd_desc->isoc_nego) { + ret = gspca_dev->sd_desc->isoc_nego(gspca_dev); + if (ret < 0) + goto out; + } else { + ep = get_ep(gspca_dev); + if (ep == NULL) { + ret = -EIO; + goto out; + } + } } out: mutex_unlock(&gspca_dev->usb_lock); @@ -739,6 +758,74 @@ static int gspca_get_mode(struct gspca_dev *gspca_dev, return -EINVAL; } +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int vidioc_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + int ret; + struct gspca_dev *gspca_dev = priv; + + if (!gspca_dev->sd_desc->get_chip_ident) + return -EINVAL; + + if (!gspca_dev->sd_desc->get_register) + return -EINVAL; + + if (mutex_lock_interruptible(&gspca_dev->usb_lock)) + return -ERESTARTSYS; + if (gspca_dev->present) + ret = gspca_dev->sd_desc->get_register(gspca_dev, reg); + else + ret = -ENODEV; + mutex_unlock(&gspca_dev->usb_lock); + + return ret; +} + +static int vidioc_s_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + int ret; + struct gspca_dev *gspca_dev = priv; + + if (!gspca_dev->sd_desc->get_chip_ident) + return -EINVAL; + + if (!gspca_dev->sd_desc->set_register) + return -EINVAL; + + if (mutex_lock_interruptible(&gspca_dev->usb_lock)) + return -ERESTARTSYS; + if (gspca_dev->present) + ret = gspca_dev->sd_desc->set_register(gspca_dev, reg); + else + ret = -ENODEV; + mutex_unlock(&gspca_dev->usb_lock); + + return ret; +} +#endif + +static int vidioc_g_chip_ident(struct file *file, void *priv, + struct v4l2_dbg_chip_ident *chip) +{ + int ret; + struct gspca_dev *gspca_dev = priv; + + if (!gspca_dev->sd_desc->get_chip_ident) + return -EINVAL; + + if (mutex_lock_interruptible(&gspca_dev->usb_lock)) + return -ERESTARTSYS; + if (gspca_dev->present) + ret = gspca_dev->sd_desc->get_chip_ident(gspca_dev, chip); + else + ret = -ENODEV; + mutex_unlock(&gspca_dev->usb_lock); + + return ret; +} + static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, struct v4l2_fmtdesc *fmtdesc) { @@ -1021,43 +1108,52 @@ out: return ret; } +static const struct ctrl *get_ctrl(struct gspca_dev *gspca_dev, + int id) +{ + const struct ctrl *ctrls; + int i; + + for (i = 0, ctrls = gspca_dev->sd_desc->ctrls; + i < gspca_dev->sd_desc->nctrls; + i++, ctrls++) { + if (gspca_dev->ctrl_dis & (1 << i)) + continue; + if (id == ctrls->qctrl.id) + return ctrls; + } + return NULL; +} + static int vidioc_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *q_ctrl) { struct gspca_dev *gspca_dev = priv; - int i, ix; + const struct ctrl *ctrls; + int i; u32 id; - ix = -1; + ctrls = NULL; id = q_ctrl->id; if (id & V4L2_CTRL_FLAG_NEXT_CTRL) { id &= V4L2_CTRL_ID_MASK; id++; for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) { - if (gspca_dev->sd_desc->ctrls[i].qctrl.id < id) + if (gspca_dev->ctrl_dis & (1 << i)) continue; - if (ix < 0) { - ix = i; + if (gspca_dev->sd_desc->ctrls[i].qctrl.id < id) continue; - } - if (gspca_dev->sd_desc->ctrls[i].qctrl.id - > gspca_dev->sd_desc->ctrls[ix].qctrl.id) + if (ctrls && gspca_dev->sd_desc->ctrls[i].qctrl.id + > ctrls->qctrl.id) continue; - ix = i; - } - } - for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) { - if (id == gspca_dev->sd_desc->ctrls[i].qctrl.id) { - ix = i; - break; + ctrls = &gspca_dev->sd_desc->ctrls[i]; } + } else { + ctrls = get_ctrl(gspca_dev, id); } - if (ix < 0) + if (ctrls == NULL) return -EINVAL; - memcpy(q_ctrl, &gspca_dev->sd_desc->ctrls[ix].qctrl, - sizeof *q_ctrl); - if (gspca_dev->ctrl_dis & (1 << ix)) - q_ctrl->flags |= V4L2_CTRL_FLAG_DISABLED; + memcpy(q_ctrl, ctrls, sizeof *q_ctrl); return 0; } @@ -1066,56 +1162,45 @@ static int vidioc_s_ctrl(struct file *file, void *priv, { struct gspca_dev *gspca_dev = priv; const struct ctrl *ctrls; - int i, ret; + int ret; - for (i = 0, ctrls = gspca_dev->sd_desc->ctrls; - i < gspca_dev->sd_desc->nctrls; - i++, ctrls++) { - if (ctrl->id != ctrls->qctrl.id) - continue; - if (gspca_dev->ctrl_dis & (1 << i)) - return -EINVAL; - if (ctrl->value < ctrls->qctrl.minimum - || ctrl->value > ctrls->qctrl.maximum) - return -ERANGE; - PDEBUG(D_CONF, "set ctrl [%08x] = %d", ctrl->id, ctrl->value); - if (mutex_lock_interruptible(&gspca_dev->usb_lock)) - return -ERESTARTSYS; - if (gspca_dev->present) - ret = ctrls->set(gspca_dev, ctrl->value); - else - ret = -ENODEV; - mutex_unlock(&gspca_dev->usb_lock); - return ret; - } - return -EINVAL; + ctrls = get_ctrl(gspca_dev, ctrl->id); + if (ctrls == NULL) + return -EINVAL; + + if (ctrl->value < ctrls->qctrl.minimum + || ctrl->value > ctrls->qctrl.maximum) + return -ERANGE; + PDEBUG(D_CONF, "set ctrl [%08x] = %d", ctrl->id, ctrl->value); + if (mutex_lock_interruptible(&gspca_dev->usb_lock)) + return -ERESTARTSYS; + if (gspca_dev->present) + ret = ctrls->set(gspca_dev, ctrl->value); + else + ret = -ENODEV; + mutex_unlock(&gspca_dev->usb_lock); + return ret; } static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct gspca_dev *gspca_dev = priv; - const struct ctrl *ctrls; - int i, ret; + int ret; - for (i = 0, ctrls = gspca_dev->sd_desc->ctrls; - i < gspca_dev->sd_desc->nctrls; - i++, ctrls++) { - if (ctrl->id != ctrls->qctrl.id) - continue; - if (gspca_dev->ctrl_dis & (1 << i)) - return -EINVAL; - if (mutex_lock_interruptible(&gspca_dev->usb_lock)) - return -ERESTARTSYS; - if (gspca_dev->present) - ret = ctrls->get(gspca_dev, &ctrl->value); - else - ret = -ENODEV; - mutex_unlock(&gspca_dev->usb_lock); - return ret; - } - return -EINVAL; + ctrls = get_ctrl(gspca_dev, ctrl->id); + if (ctrls == NULL) + return -EINVAL; + + if (mutex_lock_interruptible(&gspca_dev->usb_lock)) + return -ERESTARTSYS; + if (gspca_dev->present) + ret = ctrls->get(gspca_dev, &ctrl->value); + else + ret = -ENODEV; + mutex_unlock(&gspca_dev->usb_lock); + return ret; } /*fixme: have an audio flag in gspca_dev?*/ @@ -1897,6 +1982,11 @@ static const struct v4l2_ioctl_ops dev_ioctl_ops = { .vidioc_s_parm = vidioc_s_parm, .vidioc_s_std = vidioc_s_std, .vidioc_enum_framesizes = vidioc_enum_framesizes, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vidioc_g_register, + .vidioc_s_register = vidioc_s_register, +#endif + .vidioc_g_chip_ident = vidioc_g_chip_ident, #ifdef CONFIG_VIDEO_V4L1_COMPAT .vidiocgmbuf = vidiocgmbuf, #endif diff --git a/linux/drivers/media/video/gspca/gspca.h b/linux/drivers/media/video/gspca/gspca.h index bd1faff88..70b1fd830 100644 --- a/linux/drivers/media/video/gspca/gspca.h +++ b/linux/drivers/media/video/gspca/gspca.h @@ -69,6 +69,10 @@ typedef void (*cam_v_op) (struct gspca_dev *); typedef int (*cam_cf_op) (struct gspca_dev *, const struct usb_device_id *); typedef int (*cam_jpg_op) (struct gspca_dev *, struct v4l2_jpegcompression *); +typedef int (*cam_reg_op) (struct gspca_dev *, + struct v4l2_dbg_register *); +typedef int (*cam_ident_op) (struct gspca_dev *, + struct v4l2_dbg_chip_ident *); typedef int (*cam_streamparm_op) (struct gspca_dev *, struct v4l2_streamparm *); typedef int (*cam_qmnu_op) (struct gspca_dev *, @@ -94,9 +98,11 @@ struct sd_desc { /* mandatory operations */ cam_cf_op config; /* called on probe */ cam_op init; /* called on probe and resume */ - cam_op start; /* called on stream on */ + cam_op start; /* called on stream on after URBs creation */ cam_pkt_op pkt_scan; /* optional operations */ + cam_op isoc_init; /* called on stream on before getting the EP */ + cam_op isoc_nego; /* called when URB submit failed with NOSPC */ cam_v_op stopN; /* called on stream off - main alt */ cam_v_op stop0; /* called on stream off & disconnect - alt 0 */ cam_v_op dq_callback; /* called when a frame has been dequeued */ @@ -105,6 +111,11 @@ struct sd_desc { cam_qmnu_op querymenu; cam_streamparm_op get_streamparm; cam_streamparm_op set_streamparm; +#ifdef CONFIG_VIDEO_ADV_DEBUG + cam_reg_op set_register; + cam_reg_op get_register; +#endif + cam_ident_op get_chip_ident; }; /* packet types when moving from iso buf to frame buf */ @@ -169,6 +180,7 @@ struct gspca_dev { __u8 iface; /* USB interface number */ __u8 alt; /* USB alternate setting */ __u8 nbalt; /* number of USB alternate settings */ + u16 pkt_size; /* ISOC packet size */ }; int gspca_dev_probe(struct usb_interface *intf, diff --git a/linux/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/linux/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index 4a105cb38..1dd7c161f 100644 --- a/linux/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/linux/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -478,9 +478,6 @@ static int s5k4aa_set_vflip(struct gspca_dev *gspca_dev, __s32 val) err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); if (err < 0) return err; - err = m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); - if (err < 0) - return err; err = m5602_read_sensor(sd, S5K4AA_READ_MODE, &data, 1); if (err < 0) @@ -526,9 +523,6 @@ static int s5k4aa_set_hflip(struct gspca_dev *gspca_dev, __s32 val) err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); if (err < 0) return err; - err = m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1); - if (err < 0) - return err; err = m5602_read_sensor(sd, S5K4AA_READ_MODE, &data, 1); if (err < 0) diff --git a/linux/drivers/media/video/gspca/mars.c b/linux/drivers/media/video/gspca/mars.c index 789fd178a..68dd1ea0f 100644 --- a/linux/drivers/media/video/gspca/mars.c +++ b/linux/drivers/media/video/gspca/mars.c @@ -201,6 +201,8 @@ static int sd_start(struct gspca_dev *gspca_dev) /* create the JPEG header */ sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); + if (!sd->jpeg_hdr) + return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x21); /* JPEG 422 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); diff --git a/linux/drivers/media/video/gspca/ov519.c b/linux/drivers/media/video/gspca/ov519.c index bd70e9adb..cde3a0177 100644 --- a/linux/drivers/media/video/gspca/ov519.c +++ b/linux/drivers/media/video/gspca/ov519.c @@ -50,6 +50,19 @@ static int i2c_detect_tries = 10; struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ + __u8 packet_nr; + + char bridge; +#define BRIDGE_OV511 0 +#define BRIDGE_OV511PLUS 1 +#define BRIDGE_OV518 2 +#define BRIDGE_OV518PLUS 3 +#define BRIDGE_OV519 4 +#define BRIDGE_MASK 7 + + char invert_led; +#define BRIDGE_INVERT_LED 8 + /* Determined by sensor type */ __u8 sif; @@ -58,22 +71,25 @@ struct sd { __u8 colors; __u8 hflip; __u8 vflip; + __u8 autobrightness; + __u8 freq; __u8 stopped; /* Streaming is temporarily paused */ - __u8 frame_rate; /* current Framerate (OV519 only) */ - __u8 clockdiv; /* clockdiv override for OV519 only */ + __u8 frame_rate; /* current Framerate */ + __u8 clockdiv; /* clockdiv override */ char sensor; /* Type of image sensor chip (SEN_*) */ #define SEN_UNKNOWN 0 #define SEN_OV6620 1 #define SEN_OV6630 2 -#define SEN_OV7610 3 -#define SEN_OV7620 4 -#define SEN_OV7640 5 -#define SEN_OV7670 6 -#define SEN_OV76BE 7 -#define SEN_OV8610 8 +#define SEN_OV66308AF 3 +#define SEN_OV7610 4 +#define SEN_OV7620 5 +#define SEN_OV7640 6 +#define SEN_OV7670 7 +#define SEN_OV76BE 8 +#define SEN_OV8610 9 }; /* V4L2 controls supported by the driver */ @@ -87,8 +103,17 @@ static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val); static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); - -static struct ctrl sd_ctrls[] = { +static int sd_setautobrightness(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getautobrightness(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val); +static void setbrightness(struct gspca_dev *gspca_dev); +static void setcontrast(struct gspca_dev *gspca_dev); +static void setcolors(struct gspca_dev *gspca_dev); +static void setautobrightness(struct sd *sd); +static void setfreq(struct sd *sd); + +static const struct ctrl sd_ctrls[] = { { { .id = V4L2_CID_BRIGHTNESS, @@ -131,7 +156,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setcolors, .get = sd_getcolors, }, -/* next controls work with ov7670 only */ +/* The flip controls work with ov7670 only */ #define HFLIP_IDX 3 { { @@ -162,9 +187,54 @@ static struct ctrl sd_ctrls[] = { .set = sd_setvflip, .get = sd_getvflip, }, +#define AUTOBRIGHT_IDX 5 + { + { + .id = V4L2_CID_AUTOBRIGHTNESS, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto Brightness", + .minimum = 0, + .maximum = 1, + .step = 1, +#define AUTOBRIGHT_DEF 1 + .default_value = AUTOBRIGHT_DEF, + }, + .set = sd_setautobrightness, + .get = sd_getautobrightness, + }, +#define FREQ_IDX 6 + { + { + .id = V4L2_CID_POWER_LINE_FREQUENCY, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Light frequency filter", + .minimum = 0, + .maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */ + .step = 1, +#define FREQ_DEF 0 + .default_value = FREQ_DEF, + }, + .set = sd_setfreq, + .get = sd_getfreq, + }, +#define OV7670_FREQ_IDX 7 + { + { + .id = V4L2_CID_POWER_LINE_FREQUENCY, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Light frequency filter", + .minimum = 0, + .maximum = 3, /* 0: 0, 1: 50Hz, 2:60Hz 3: Auto Hz */ + .step = 1, +#define OV7670_FREQ_DEF 3 + .default_value = OV7670_FREQ_DEF, + }, + .set = sd_setfreq, + .get = sd_getfreq, + }, }; -static const struct v4l2_pix_format vga_mode[] = { +static const struct v4l2_pix_format ov519_vga_mode[] = { {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 320, .sizeimage = 320 * 240 * 3 / 8 + 590, @@ -176,12 +246,22 @@ static const struct v4l2_pix_format vga_mode[] = { .colorspace = V4L2_COLORSPACE_JPEG, .priv = 0}, }; -static const struct v4l2_pix_format sif_mode[] = { +static const struct v4l2_pix_format ov519_sif_mode[] = { + {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 160 * 120 * 3 / 8 + 590, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 3}, {176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 176, .sizeimage = 176 * 144 * 3 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 1}, + {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3 / 8 + 590, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 2}, {352, 288, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 352, .sizeimage = 352 * 288 * 3 / 8 + 590, @@ -189,6 +269,123 @@ static const struct v4l2_pix_format sif_mode[] = { .priv = 0}, }; +/* Note some of the sizeimage values for the ov511 / ov518 may seem + larger then necessary, however they need to be this big as the ov511 / + ov518 always fills the entire isoc frame, using 0 padding bytes when + it doesn't have any data. So with low framerates the amount of data + transfered can become quite large (libv4l will remove all the 0 padding + in userspace). */ +static const struct v4l2_pix_format ov518_vga_mode[] = { + {320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1}, + {640, 480, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480 * 2, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0}, +}; +static const struct v4l2_pix_format ov518_sif_mode[] = { + {160, 120, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 70000, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 3}, + {176, 144, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, + .bytesperline = 176, + .sizeimage = 70000, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1}, + {320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 2}, + {352, 288, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, + .bytesperline = 352, + .sizeimage = 352 * 288 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0}, +}; + +static const struct v4l2_pix_format ov511_vga_mode[] = { + {320, 240, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1}, + {640, 480, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480 * 2, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0}, +}; +static const struct v4l2_pix_format ov511_sif_mode[] = { + {160, 120, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 70000, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 3}, + {176, 144, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 176, + .sizeimage = 70000, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1}, + {320, 240, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 2}, + {352, 288, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 352, + .sizeimage = 352 * 288 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0}, +}; + +/* Registers common to OV511 / OV518 */ +#define R51x_FIFO_PSIZE 0x30 /* 2 bytes wide w/ OV518(+) */ +#define R51x_SYS_RESET 0x50 + /* Reset type flags */ + #define OV511_RESET_OMNICE 0x08 +#define R51x_SYS_INIT 0x53 +#define R51x_SYS_SNAP 0x52 +#define R51x_SYS_CUST_ID 0x5F +#define R51x_COMP_LUT_BEGIN 0x80 + +/* OV511 Camera interface register numbers */ +#define R511_CAM_DELAY 0x10 +#define R511_CAM_EDGE 0x11 +#define R511_CAM_PXCNT 0x12 +#define R511_CAM_LNCNT 0x13 +#define R511_CAM_PXDIV 0x14 +#define R511_CAM_LNDIV 0x15 +#define R511_CAM_UV_EN 0x16 +#define R511_CAM_LINE_MODE 0x17 +#define R511_CAM_OPTS 0x18 + +#define R511_SNAP_FRAME 0x19 +#define R511_SNAP_PXCNT 0x1A +#define R511_SNAP_LNCNT 0x1B +#define R511_SNAP_PXDIV 0x1C +#define R511_SNAP_LNDIV 0x1D +#define R511_SNAP_UV_EN 0x1E +#define R511_SNAP_UV_EN 0x1E +#define R511_SNAP_OPTS 0x1F + +#define R511_DRAM_FLOW_CTL 0x20 +#define R511_FIFO_OPTS 0x31 +#define R511_I2C_CTL 0x40 +#define R511_SYS_LED_CTL 0x55 /* OV511+ only */ +#define R511_COMP_EN 0x78 +#define R511_COMP_LUT_EN 0x79 + +/* OV518 Camera interface register numbers */ +#define R518_GPIO_OUT 0x56 /* OV518(+) only */ +#define R518_GPIO_CTL 0x57 /* OV518(+) only */ + /* OV519 Camera interface register numbers */ #define OV519_R10_H_SIZE 0x10 #define OV519_R11_V_SIZE 0x11 @@ -224,6 +421,8 @@ static const struct v4l2_pix_format sif_mode[] = { /* OV7610 registers */ #define OV7610_REG_GAIN 0x00 /* gain setting (5:0) */ +#define OV7610_REG_BLUE 0x01 /* blue channel balance */ +#define OV7610_REG_RED 0x02 /* red channel balance */ #define OV7610_REG_SAT 0x03 /* saturation */ #define OV8610_REG_HUE 0x04 /* 04 reserved */ #define OV7610_REG_CNT 0x05 /* Y contrast */ @@ -330,7 +529,7 @@ static const struct ov_i2c_regvals norm_6x20[] = { { 0x28, 0x05 }, { 0x2a, 0x04 }, /* Disable framerate adjust */ /* { 0x2b, 0xac }, * Framerate; Set 2a[7] first */ - { 0x2d, 0x99 }, + { 0x2d, 0x85 }, { 0x33, 0xa0 }, /* Color Processing Parameter */ { 0x34, 0xd2 }, /* Max A/D range */ { 0x38, 0x8b }, @@ -363,7 +562,7 @@ static const struct ov_i2c_regvals norm_6x30[] = { { 0x07, 0x2d }, /* Sharpness */ { 0x0c, 0x20 }, { 0x0d, 0x20 }, - { 0x0e, 0x20 }, + { 0x0e, 0xa0 }, /* Was 0x20, bit7 enables a 2x gain which we need */ { 0x0f, 0x05 }, { 0x10, 0x9a }, { 0x11, 0x00 }, /* Pixel clock = fastest */ @@ -505,7 +704,7 @@ static const struct ov_i2c_regvals norm_7620[] = { { 0x23, 0x00 }, { 0x26, 0xa2 }, { 0x27, 0xea }, - { 0x28, 0x20 }, + { 0x28, 0x22 }, /* Was 0x20, bit1 enables a 2x gain which we need */ { 0x29, 0x00 }, { 0x2a, 0x10 }, { 0x2b, 0x00 }, @@ -846,11 +1045,12 @@ static unsigned char ov7670_abs_to_sm(unsigned char v) static int reg_w(struct sd *sd, __u16 index, __u8 value) { int ret; + int req = (sd->bridge <= BRIDGE_OV511PLUS) ? 2 : 1; sd->gspca_dev.usb_buf[0] = value; ret = usb_control_msg(sd->gspca_dev.dev, usb_sndctrlpipe(sd->gspca_dev.dev, 0), - 1, /* REQ_IO (ov518/519) */ + req, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, index, sd->gspca_dev.usb_buf, 1, 500); @@ -864,10 +1064,11 @@ static int reg_w(struct sd *sd, __u16 index, __u8 value) static int reg_r(struct sd *sd, __u16 index) { int ret; + int req = (sd->bridge <= BRIDGE_OV511PLUS) ? 3 : 1; ret = usb_control_msg(sd->gspca_dev.dev, usb_rcvctrlpipe(sd->gspca_dev.dev, 0), - 1, /* REQ_IO */ + req, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, index, sd->gspca_dev.usb_buf, 1, 500); @@ -924,11 +1125,152 @@ static int reg_w_mask(struct sd *sd, } /* + * Writes multiple (n) byte value to a single register. Only valid with certain + * registers (0x30 and 0xc4 - 0xce). + */ +static int ov518_reg_w32(struct sd *sd, __u16 index, u32 value, int n) +{ + int ret; + + *((u32 *)sd->gspca_dev.usb_buf) = __cpu_to_le32(value); + + ret = usb_control_msg(sd->gspca_dev.dev, + usb_sndctrlpipe(sd->gspca_dev.dev, 0), + 1 /* REG_IO */, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, index, + sd->gspca_dev.usb_buf, n, 500); + if (ret < 0) + PDEBUG(D_ERR, "Write reg32 [%02x] %08x failed", index, value); + return ret; +} + +static int ov511_i2c_w(struct sd *sd, __u8 reg, __u8 value) +{ + int rc, retries; + + PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg); + + /* Three byte write cycle */ + for (retries = 6; ; ) { + /* Select camera register */ + rc = reg_w(sd, R51x_I2C_SADDR_3, reg); + if (rc < 0) + return rc; + + /* Write "value" to I2C data port of OV511 */ + rc = reg_w(sd, R51x_I2C_DATA, value); + if (rc < 0) + return rc; + + /* Initiate 3-byte write cycle */ + rc = reg_w(sd, R511_I2C_CTL, 0x01); + if (rc < 0) + return rc; + + do + rc = reg_r(sd, R511_I2C_CTL); + while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */ + + if (rc < 0) + return rc; + + if ((rc & 2) == 0) /* Ack? */ + break; +#if 0 + /* I2C abort */ + reg_w(sd, R511_I2C_CTL, 0x10); +#endif + if (--retries < 0) { + PDEBUG(D_USBO, "i2c write retries exhausted"); + return -1; + } + } + + return 0; +} + +static int ov511_i2c_r(struct sd *sd, __u8 reg) +{ + int rc, value, retries; + + /* Two byte write cycle */ + for (retries = 6; ; ) { + /* Select camera register */ + rc = reg_w(sd, R51x_I2C_SADDR_2, reg); + if (rc < 0) + return rc; + + /* Initiate 2-byte write cycle */ + rc = reg_w(sd, R511_I2C_CTL, 0x03); + if (rc < 0) + return rc; + + do + rc = reg_r(sd, R511_I2C_CTL); + while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */ + + if (rc < 0) + return rc; + + if ((rc & 2) == 0) /* Ack? */ + break; + + /* I2C abort */ + reg_w(sd, R511_I2C_CTL, 0x10); + + if (--retries < 0) { + PDEBUG(D_USBI, "i2c write retries exhausted"); + return -1; + } + } + + /* Two byte read cycle */ + for (retries = 6; ; ) { + /* Initiate 2-byte read cycle */ + rc = reg_w(sd, R511_I2C_CTL, 0x05); + if (rc < 0) + return rc; + + do + rc = reg_r(sd, R511_I2C_CTL); + while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */ + + if (rc < 0) + return rc; + + if ((rc & 2) == 0) /* Ack? */ + break; + + /* I2C abort */ + rc = reg_w(sd, R511_I2C_CTL, 0x10); + if (rc < 0) + return rc; + + if (--retries < 0) { + PDEBUG(D_USBI, "i2c read retries exhausted"); + return -1; + } + } + + value = reg_r(sd, R51x_I2C_DATA); + + PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value); + + /* This is needed to make i2c_w() work */ + rc = reg_w(sd, R511_I2C_CTL, 0x05); + if (rc < 0) + return rc; + + return value; +} + +/* * The OV518 I2C I/O procedure is different, hence, this function. * This is normally only called from i2c_w(). Note that this function * always succeeds regardless of whether the sensor is present and working. */ -static int i2c_w(struct sd *sd, +static int ov518_i2c_w(struct sd *sd, __u8 reg, __u8 value) { @@ -963,7 +1305,7 @@ static int i2c_w(struct sd *sd, * This is normally only called from i2c_r(). Note that this function * always succeeds regardless of whether the sensor is present and working. */ -static int i2c_r(struct sd *sd, __u8 reg) +static int ov518_i2c_r(struct sd *sd, __u8 reg) { int rc, value; @@ -986,6 +1328,34 @@ static int i2c_r(struct sd *sd, __u8 reg) return value; } +static int i2c_w(struct sd *sd, __u8 reg, __u8 value) +{ + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + return ov511_i2c_w(sd, reg, value); + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + case BRIDGE_OV519: + return ov518_i2c_w(sd, reg, value); + } + return -1; /* Should never happen */ +} + +static int i2c_r(struct sd *sd, __u8 reg) +{ + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + return ov511_i2c_r(sd, reg); + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + case BRIDGE_OV519: + return ov518_i2c_r(sd, reg); + } + return -1; /* Should never happen */ +} + /* Writes bits at positions specified by mask to an I2C reg. Bits that are in * the same position as 1's in "mask" are cleared and set to "value". Bits * that are in the same position as 0's in "mask" are preserved, regardless @@ -1014,20 +1384,47 @@ static inline int ov51x_stop(struct sd *sd) { PDEBUG(D_STREAM, "stopping"); sd->stopped = 1; - return reg_w(sd, OV519_SYS_RESET1, 0x0f); + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + return reg_w(sd, R51x_SYS_RESET, 0x3d); + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + return reg_w_mask(sd, R51x_SYS_RESET, 0x3a, 0x3a); + case BRIDGE_OV519: + return reg_w(sd, OV519_SYS_RESET1, 0x0f); + } + + return 0; } /* Restarts OV511 after ov511_stop() is called. Has no effect if it is not * actually stopped (for performance). */ static inline int ov51x_restart(struct sd *sd) { + int rc; + PDEBUG(D_STREAM, "restarting"); if (!sd->stopped) return 0; sd->stopped = 0; /* Reinitialize the stream */ - return reg_w(sd, OV519_SYS_RESET1, 0x00); + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + return reg_w(sd, R51x_SYS_RESET, 0x00); + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + rc = reg_w(sd, 0x2f, 0x80); + if (rc < 0) + return rc; + return reg_w(sd, R51x_SYS_RESET, 0x00); + case BRIDGE_OV519: + return reg_w(sd, OV519_SYS_RESET1, 0x00); + } + + return 0; } /* This does an initial reset of an OmniVision sensor and ensures that I2C @@ -1138,7 +1535,6 @@ static int ov8xx0_configure(struct sd *sd) } /* Set sensor-specific vars */ -/* sd->sif = 0; already done */ return 0; } @@ -1175,15 +1571,13 @@ static int ov7xx0_configure(struct sd *sd) } } else if ((rc & 3) == 1) { /* I don't know what's different about the 76BE yet. */ - if (i2c_r(sd, 0x15) & 1) + if (i2c_r(sd, 0x15) & 1) { PDEBUG(D_PROBE, "Sensor is an OV7620AE"); - else + sd->sensor = SEN_OV7620; + } else { PDEBUG(D_PROBE, "Sensor is an OV76BE"); - - /* OV511+ will return all zero isoc data unless we - * configure the sensor as a 7620. Someone needs to - * find the exact reg. setting that causes this. */ - sd->sensor = SEN_OV76BE; + sd->sensor = SEN_OV76BE; + } } else if ((rc & 3) == 0) { /* try to read product id registers */ high = i2c_r(sd, 0x0a); @@ -1229,7 +1623,6 @@ static int ov7xx0_configure(struct sd *sd) } /* Set sensor-specific vars */ -/* sd->sif = 0; already done */ return 0; } @@ -1258,13 +1651,14 @@ static int ov6xx0_configure(struct sd *sd) break; case 0x01: sd->sensor = SEN_OV6620; + PDEBUG(D_PROBE, "Sensor is an OV6620"); break; case 0x02: sd->sensor = SEN_OV6630; PDEBUG(D_PROBE, "Sensor is an OV66308AE"); break; case 0x03: - sd->sensor = SEN_OV6630; + sd->sensor = SEN_OV66308AF; PDEBUG(D_PROBE, "Sensor is an OV66308AF"); break; case 0x90: @@ -1287,16 +1681,276 @@ static int ov6xx0_configure(struct sd *sd) /* Turns on or off the LED. Only has an effect with OV511+/OV518(+)/OV519 */ static void ov51x_led_control(struct sd *sd, int on) { - reg_w_mask(sd, OV519_GPIO_DATA_OUT0, !on, 1); /* 0 / 1 */ + if (sd->invert_led) + on = !on; + + switch (sd->bridge) { + /* OV511 has no LED control */ + case BRIDGE_OV511PLUS: + reg_w(sd, R511_SYS_LED_CTL, on ? 1 : 0); + break; + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + reg_w_mask(sd, R518_GPIO_OUT, on ? 0x02 : 0x00, 0x02); + break; + case BRIDGE_OV519: + reg_w_mask(sd, OV519_GPIO_DATA_OUT0, !on, 1); /* 0 / 1 */ + break; + } } -/* this function is called at probe time */ -static int sd_config(struct gspca_dev *gspca_dev, - const struct usb_device_id *id) +static int ov51x_upload_quan_tables(struct sd *sd) +{ + const unsigned char yQuanTable511[] = { + 0, 1, 1, 2, 2, 3, 3, 4, + 1, 1, 1, 2, 2, 3, 4, 4, + 1, 1, 2, 2, 3, 4, 4, 4, + 2, 2, 2, 3, 4, 4, 4, 4, + 2, 2, 3, 4, 4, 5, 5, 5, + 3, 3, 4, 4, 5, 5, 5, 5, + 3, 4, 4, 4, 5, 5, 5, 5, + 4, 4, 4, 4, 5, 5, 5, 5 + }; + + const unsigned char uvQuanTable511[] = { + 0, 2, 2, 3, 4, 4, 4, 4, + 2, 2, 2, 4, 4, 4, 4, 4, + 2, 2, 3, 4, 4, 4, 4, 4, + 3, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4 + }; + + /* OV518 quantization tables are 8x4 (instead of 8x8) */ + const unsigned char yQuanTable518[] = { + 5, 4, 5, 6, 6, 7, 7, 7, + 5, 5, 5, 5, 6, 7, 7, 7, + 6, 6, 6, 6, 7, 7, 7, 8, + 7, 7, 6, 7, 7, 7, 8, 8 + }; + + const unsigned char uvQuanTable518[] = { + 6, 6, 6, 7, 7, 7, 7, 7, + 6, 6, 6, 7, 7, 7, 7, 7, + 6, 6, 6, 7, 7, 7, 7, 8, + 7, 7, 7, 7, 7, 7, 8, 8 + }; + + const unsigned char *pYTable, *pUVTable; + unsigned char val0, val1; + int i, size, rc, reg = R51x_COMP_LUT_BEGIN; + + PDEBUG(D_PROBE, "Uploading quantization tables"); + + if (sd->bridge == BRIDGE_OV511 || sd->bridge == BRIDGE_OV511PLUS) { + pYTable = yQuanTable511; + pUVTable = uvQuanTable511; + size = 32; + } else { + pYTable = yQuanTable518; + pUVTable = uvQuanTable518; + size = 16; + } + + for (i = 0; i < size; i++) { + val0 = *pYTable++; + val1 = *pYTable++; + val0 &= 0x0f; + val1 &= 0x0f; + val0 |= val1 << 4; + rc = reg_w(sd, reg, val0); + if (rc < 0) + return rc; + + val0 = *pUVTable++; + val1 = *pUVTable++; + val0 &= 0x0f; + val1 &= 0x0f; + val0 |= val1 << 4; + rc = reg_w(sd, reg + size, val0); + if (rc < 0) + return rc; + + reg++; + } + + return 0; +} + +/* This initializes the OV511/OV511+ and the sensor */ +static int ov511_configure(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - struct cam *cam; + int rc; + + /* For 511 and 511+ */ + const struct ov_regvals init_511[] = { + { R51x_SYS_RESET, 0x7f }, + { R51x_SYS_INIT, 0x01 }, + { R51x_SYS_RESET, 0x7f }, + { R51x_SYS_INIT, 0x01 }, + { R51x_SYS_RESET, 0x3f }, + { R51x_SYS_INIT, 0x01 }, + { R51x_SYS_RESET, 0x3d }, + }; + + const struct ov_regvals norm_511[] = { + { R511_DRAM_FLOW_CTL, 0x01 }, + { R51x_SYS_SNAP, 0x00 }, + { R51x_SYS_SNAP, 0x02 }, + { R51x_SYS_SNAP, 0x00 }, + { R511_FIFO_OPTS, 0x1f }, + { R511_COMP_EN, 0x00 }, + { R511_COMP_LUT_EN, 0x03 }, + }; + + const struct ov_regvals norm_511_p[] = { + { R511_DRAM_FLOW_CTL, 0xff }, + { R51x_SYS_SNAP, 0x00 }, + { R51x_SYS_SNAP, 0x02 }, + { R51x_SYS_SNAP, 0x00 }, + { R511_FIFO_OPTS, 0xff }, + { R511_COMP_EN, 0x00 }, + { R511_COMP_LUT_EN, 0x03 }, + }; + + const struct ov_regvals compress_511[] = { + { 0x70, 0x1f }, + { 0x71, 0x05 }, + { 0x72, 0x06 }, + { 0x73, 0x06 }, + { 0x74, 0x14 }, + { 0x75, 0x03 }, + { 0x76, 0x04 }, + { 0x77, 0x04 }, + }; + + PDEBUG(D_PROBE, "Device custom id %x", reg_r(sd, R51x_SYS_CUST_ID)); + + rc = write_regvals(sd, init_511, ARRAY_SIZE(init_511)); + if (rc < 0) + return rc; + + switch (sd->bridge) { + case BRIDGE_OV511: + rc = write_regvals(sd, norm_511, ARRAY_SIZE(norm_511)); + if (rc < 0) + return rc; + break; + case BRIDGE_OV511PLUS: + rc = write_regvals(sd, norm_511_p, ARRAY_SIZE(norm_511_p)); + if (rc < 0) + return rc; + break; + } + + /* Init compression */ + rc = write_regvals(sd, compress_511, ARRAY_SIZE(compress_511)); + if (rc < 0) + return rc; + + rc = ov51x_upload_quan_tables(sd); + if (rc < 0) { + PDEBUG(D_ERR, "Error uploading quantization tables"); + return rc; + } + + return 0; +} + +/* This initializes the OV518/OV518+ and the sensor */ +static int ov518_configure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int rc; + + /* For 518 and 518+ */ + const struct ov_regvals init_518[] = { + { R51x_SYS_RESET, 0x40 }, + { R51x_SYS_INIT, 0xe1 }, + { R51x_SYS_RESET, 0x3e }, + { R51x_SYS_INIT, 0xe1 }, + { R51x_SYS_RESET, 0x00 }, + { R51x_SYS_INIT, 0xe1 }, + { 0x46, 0x00 }, + { 0x5d, 0x03 }, + }; + + const struct ov_regvals norm_518[] = { + { R51x_SYS_SNAP, 0x02 }, /* Reset */ + { R51x_SYS_SNAP, 0x01 }, /* Enable */ + { 0x31, 0x0f }, + { 0x5d, 0x03 }, + { 0x24, 0x9f }, + { 0x25, 0x90 }, + { 0x20, 0x00 }, + { 0x51, 0x04 }, + { 0x71, 0x19 }, + { 0x2f, 0x80 }, + }; + + const struct ov_regvals norm_518_p[] = { + { R51x_SYS_SNAP, 0x02 }, /* Reset */ + { R51x_SYS_SNAP, 0x01 }, /* Enable */ + { 0x31, 0x0f }, + { 0x5d, 0x03 }, + { 0x24, 0x9f }, + { 0x25, 0x90 }, + { 0x20, 0x60 }, + { 0x51, 0x02 }, + { 0x71, 0x19 }, + { 0x40, 0xff }, + { 0x41, 0x42 }, + { 0x46, 0x00 }, + { 0x33, 0x04 }, + { 0x21, 0x19 }, + { 0x3f, 0x10 }, + { 0x2f, 0x80 }, + }; + + /* First 5 bits of custom ID reg are a revision ID on OV518 */ + PDEBUG(D_PROBE, "Device revision %d", + 0x1F & reg_r(sd, R51x_SYS_CUST_ID)); + + rc = write_regvals(sd, init_518, ARRAY_SIZE(init_518)); + if (rc < 0) + return rc; + + /* Set LED GPIO pin to output mode */ + rc = reg_w_mask(sd, R518_GPIO_CTL, 0x00, 0x02); + if (rc < 0) + return rc; + + switch (sd->bridge) { + case BRIDGE_OV518: + rc = write_regvals(sd, norm_518, ARRAY_SIZE(norm_518)); + if (rc < 0) + return rc; + break; + case BRIDGE_OV518PLUS: + rc = write_regvals(sd, norm_518_p, ARRAY_SIZE(norm_518_p)); + if (rc < 0) + return rc; + break; + } + rc = ov51x_upload_quan_tables(sd); + if (rc < 0) { + PDEBUG(D_ERR, "Error uploading quantization tables"); + return rc; + } + + rc = reg_w(sd, 0x2f, 0x80); + if (rc < 0) + return rc; + + return 0; +} + +static int ov519_configure(struct sd *sd) +{ static const struct ov_regvals init_519[] = { { 0x5a, 0x6d }, /* EnableSystem */ { 0x53, 0x9b }, @@ -1313,8 +1967,37 @@ static int sd_config(struct gspca_dev *gspca_dev, /* windows reads 0x55 at this point*/ }; - if (write_regvals(sd, init_519, ARRAY_SIZE(init_519))) + return write_regvals(sd, init_519, ARRAY_SIZE(init_519)); +} + +/* this function is called at probe time */ +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct sd *sd = (struct sd *) gspca_dev; + struct cam *cam; + int ret = 0; + + sd->bridge = id->driver_info & BRIDGE_MASK; + sd->invert_led = id->driver_info & BRIDGE_INVERT_LED; + + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + ret = ov511_configure(gspca_dev); + break; + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + ret = ov518_configure(gspca_dev); + break; + case BRIDGE_OV519: + ret = ov519_configure(sd); + break; + } + + if (ret) goto error; + ov51x_led_control(sd, 0); /* turn LED off */ /* Test for 76xx */ @@ -1360,21 +2043,60 @@ static int sd_config(struct gspca_dev *gspca_dev, } cam = &gspca_dev->cam; - if (!sd->sif) { - cam->cam_mode = vga_mode; - cam->nmodes = ARRAY_SIZE(vga_mode); - } else { - cam->cam_mode = sif_mode; - cam->nmodes = ARRAY_SIZE(sif_mode); + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + if (!sd->sif) { + cam->cam_mode = ov511_vga_mode; + cam->nmodes = ARRAY_SIZE(ov511_vga_mode); + } else { + cam->cam_mode = ov511_sif_mode; + cam->nmodes = ARRAY_SIZE(ov511_sif_mode); + } + break; + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + if (!sd->sif) { + cam->cam_mode = ov518_vga_mode; + cam->nmodes = ARRAY_SIZE(ov518_vga_mode); + } else { + cam->cam_mode = ov518_sif_mode; + cam->nmodes = ARRAY_SIZE(ov518_sif_mode); + } + break; + case BRIDGE_OV519: + if (!sd->sif) { + cam->cam_mode = ov519_vga_mode; + cam->nmodes = ARRAY_SIZE(ov519_vga_mode); + } else { + cam->cam_mode = ov519_sif_mode; + cam->nmodes = ARRAY_SIZE(ov519_sif_mode); + } + break; } sd->brightness = BRIGHTNESS_DEF; - sd->contrast = CONTRAST_DEF; + if (sd->sensor == SEN_OV6630 || sd->sensor == SEN_OV66308AF) + sd->contrast = 200; /* The default is too low for the ov6630 */ + else + sd->contrast = CONTRAST_DEF; sd->colors = COLOR_DEF; sd->hflip = HFLIP_DEF; sd->vflip = VFLIP_DEF; - if (sd->sensor != SEN_OV7670) - gspca_dev->ctrl_dis = (1 << HFLIP_IDX) - | (1 << VFLIP_IDX); + sd->autobrightness = AUTOBRIGHT_DEF; + if (sd->sensor == SEN_OV7670) { + sd->freq = OV7670_FREQ_DEF; + gspca_dev->ctrl_dis = 1 << FREQ_IDX; + } else { + sd->freq = FREQ_DEF; + gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | + (1 << OV7670_FREQ_IDX); + } + if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670) + gspca_dev->ctrl_dis |= 1 << AUTOBRIGHT_IDX; + /* OV8610 Frequency filter control should work but needs testing */ + if (sd->sensor == SEN_OV8610) + gspca_dev->ctrl_dis |= 1 << FREQ_IDX; + return 0; error: PDEBUG(D_ERR, "OV519 Config failed"); @@ -1393,6 +2115,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return -EIO; break; case SEN_OV6630: + case SEN_OV66308AF: if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30))) return -EIO; break; @@ -1401,6 +2124,8 @@ static int sd_init(struct gspca_dev *gspca_dev) /* case SEN_OV76BE: */ if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610))) return -EIO; + if (i2c_w_mask(sd, 0x0e, 0x00, 0x40)) + return -EIO; break; case SEN_OV7620: if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620))) @@ -1422,6 +2147,248 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } +/* Set up the OV511/OV511+ with the given image parameters. + * + * Do not put any sensor-specific code in here (including I2C I/O functions) + */ +static int ov511_mode_init_regs(struct sd *sd) +{ + int hsegs, vsegs, packet_size, fps, needed; + int interlaced = 0; + struct usb_host_interface *alt; + struct usb_interface *intf; + + intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); + alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); + if (!alt) { + PDEBUG(D_ERR, "Couldn't get altsetting"); + return -EIO; + } + + packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); + reg_w(sd, R51x_FIFO_PSIZE, packet_size >> 5); + + reg_w(sd, R511_CAM_UV_EN, 0x01); + reg_w(sd, R511_SNAP_UV_EN, 0x01); + reg_w(sd, R511_SNAP_OPTS, 0x03); + + /* Here I'm assuming that snapshot size == image size. + * I hope that's always true. --claudio + */ + hsegs = (sd->gspca_dev.width >> 3) - 1; + vsegs = (sd->gspca_dev.height >> 3) - 1; + + reg_w(sd, R511_CAM_PXCNT, hsegs); + reg_w(sd, R511_CAM_LNCNT, vsegs); + reg_w(sd, R511_CAM_PXDIV, 0x00); + reg_w(sd, R511_CAM_LNDIV, 0x00); + + /* YUV420, low pass filter on */ + reg_w(sd, R511_CAM_OPTS, 0x03); + + /* Snapshot additions */ + reg_w(sd, R511_SNAP_PXCNT, hsegs); + reg_w(sd, R511_SNAP_LNCNT, vsegs); + reg_w(sd, R511_SNAP_PXDIV, 0x00); + reg_w(sd, R511_SNAP_LNDIV, 0x00); + + /******** Set the framerate ********/ + if (frame_rate > 0) + sd->frame_rate = frame_rate; + + switch (sd->sensor) { + case SEN_OV6620: + /* No framerate control, doesn't like higher rates yet */ + sd->clockdiv = 3; + break; + + /* Note once the FIXME's in mode_init_ov_sensor_regs() are fixed + for more sensors we need to do this for them too */ + case SEN_OV7620: + case SEN_OV7640: + case SEN_OV76BE: + if (sd->gspca_dev.width == 320) + interlaced = 1; + /* Fall through */ + case SEN_OV6630: + case SEN_OV7610: + case SEN_OV7670: + switch (sd->frame_rate) { + case 30: + case 25: + /* Not enough bandwidth to do 640x480 @ 30 fps */ + if (sd->gspca_dev.width != 640) { + sd->clockdiv = 0; + break; + } + /* Fall through for 640x480 case */ + default: +/* case 20: */ +/* case 15: */ + sd->clockdiv = 1; + break; + case 10: + sd->clockdiv = 2; + break; + case 5: + sd->clockdiv = 5; + break; + } + if (interlaced) { + sd->clockdiv = (sd->clockdiv + 1) * 2 - 1; + /* Higher then 10 does not work */ + if (sd->clockdiv > 10) + sd->clockdiv = 10; + } + break; + + case SEN_OV8610: + /* No framerate control ?? */ + sd->clockdiv = 0; + break; + } + + /* Check if we have enough bandwidth to disable compression */ + fps = (interlaced ? 60 : 30) / (sd->clockdiv + 1) + 1; + needed = fps * sd->gspca_dev.width * sd->gspca_dev.height * 3 / 2; + /* 1400 is a conservative estimate of the max nr of isoc packets/sec */ + if (needed > 1400 * packet_size) { + /* Enable Y and UV quantization and compression */ + reg_w(sd, R511_COMP_EN, 0x07); + reg_w(sd, R511_COMP_LUT_EN, 0x03); + } else { + reg_w(sd, R511_COMP_EN, 0x06); + reg_w(sd, R511_COMP_LUT_EN, 0x00); + } + + reg_w(sd, R51x_SYS_RESET, OV511_RESET_OMNICE); + reg_w(sd, R51x_SYS_RESET, 0); + + return 0; +} + +/* Sets up the OV518/OV518+ with the given image parameters + * + * OV518 needs a completely different approach, until we can figure out what + * the individual registers do. Also, only 15 FPS is supported now. + * + * Do not put any sensor-specific code in here (including I2C I/O functions) + */ +static int ov518_mode_init_regs(struct sd *sd) +{ + int hsegs, vsegs, packet_size; + struct usb_host_interface *alt; + struct usb_interface *intf; + + intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); + alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); + if (!alt) { + PDEBUG(D_ERR, "Couldn't get altsetting"); + return -EIO; + } + + packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); + ov518_reg_w32(sd, R51x_FIFO_PSIZE, packet_size & ~7, 2); + + /******** Set the mode ********/ + + reg_w(sd, 0x2b, 0); + reg_w(sd, 0x2c, 0); + reg_w(sd, 0x2d, 0); + reg_w(sd, 0x2e, 0); + reg_w(sd, 0x3b, 0); + reg_w(sd, 0x3c, 0); + reg_w(sd, 0x3d, 0); + reg_w(sd, 0x3e, 0); + + if (sd->bridge == BRIDGE_OV518) { + /* Set 8-bit (YVYU) input format */ + reg_w_mask(sd, 0x20, 0x08, 0x08); + + /* Set 12-bit (4:2:0) output format */ + reg_w_mask(sd, 0x28, 0x80, 0xf0); + reg_w_mask(sd, 0x38, 0x80, 0xf0); + } else { + reg_w(sd, 0x28, 0x80); + reg_w(sd, 0x38, 0x80); + } + + hsegs = sd->gspca_dev.width / 16; + vsegs = sd->gspca_dev.height / 4; + + reg_w(sd, 0x29, hsegs); + reg_w(sd, 0x2a, vsegs); + + reg_w(sd, 0x39, hsegs); + reg_w(sd, 0x3a, vsegs); + + /* Windows driver does this here; who knows why */ + reg_w(sd, 0x2f, 0x80); + + /******** Set the framerate ********/ + sd->clockdiv = 1; + + /* Mode independent, but framerate dependent, regs */ + /* 0x51: Clock divider; Only works on some cams which use 2 crystals */ + reg_w(sd, 0x51, 0x04); + reg_w(sd, 0x22, 0x18); + reg_w(sd, 0x23, 0xff); + + if (sd->bridge == BRIDGE_OV518PLUS) { + switch (sd->sensor) { + case SEN_OV7620: + if (sd->gspca_dev.width == 320) { + reg_w(sd, 0x20, 0x00); + reg_w(sd, 0x21, 0x19); + } else { + reg_w(sd, 0x20, 0x60); + reg_w(sd, 0x21, 0x1f); + } + break; + default: + reg_w(sd, 0x21, 0x19); + } + } else + reg_w(sd, 0x71, 0x17); /* Compression-related? */ + + /* FIXME: Sensor-specific */ + /* Bit 5 is what matters here. Of course, it is "reserved" */ + i2c_w(sd, 0x54, 0x23); + + reg_w(sd, 0x2f, 0x80); + + if (sd->bridge == BRIDGE_OV518PLUS) { + reg_w(sd, 0x24, 0x94); + reg_w(sd, 0x25, 0x90); + ov518_reg_w32(sd, 0xc4, 400, 2); /* 190h */ + ov518_reg_w32(sd, 0xc6, 540, 2); /* 21ch */ + ov518_reg_w32(sd, 0xc7, 540, 2); /* 21ch */ + ov518_reg_w32(sd, 0xc8, 108, 2); /* 6ch */ + ov518_reg_w32(sd, 0xca, 131098, 3); /* 2001ah */ + ov518_reg_w32(sd, 0xcb, 532, 2); /* 214h */ + ov518_reg_w32(sd, 0xcc, 2400, 2); /* 960h */ + ov518_reg_w32(sd, 0xcd, 32, 2); /* 20h */ + ov518_reg_w32(sd, 0xce, 608, 2); /* 260h */ + } else { + reg_w(sd, 0x24, 0x9f); + reg_w(sd, 0x25, 0x90); + ov518_reg_w32(sd, 0xc4, 400, 2); /* 190h */ + ov518_reg_w32(sd, 0xc6, 381, 2); /* 17dh */ + ov518_reg_w32(sd, 0xc7, 381, 2); /* 17dh */ + ov518_reg_w32(sd, 0xc8, 128, 2); /* 80h */ + ov518_reg_w32(sd, 0xca, 183331, 3); /* 2cc23h */ + ov518_reg_w32(sd, 0xcb, 746, 2); /* 2eah */ + ov518_reg_w32(sd, 0xcc, 1750, 2); /* 6d6h */ + ov518_reg_w32(sd, 0xcd, 45, 2); /* 2dh */ + ov518_reg_w32(sd, 0xce, 851, 2); /* 353h */ + } + + reg_w(sd, 0x2f, 0x80); + + return 0; +} + + /* Sets up the OV519 with the given image parameters * * OV519 needs a completely different approach, until we can figure out what @@ -1492,7 +2459,11 @@ static int ov519_mode_init_regs(struct sd *sd) reg_w(sd, OV519_R10_H_SIZE, sd->gspca_dev.width >> 4); reg_w(sd, OV519_R11_V_SIZE, sd->gspca_dev.height >> 3); - reg_w(sd, OV519_R12_X_OFFSETL, 0x00); + if (sd->sensor == SEN_OV7670 && + sd->gspca_dev.cam.cam_mode[sd->gspca_dev.curr_mode].priv) + reg_w(sd, OV519_R12_X_OFFSETL, 0x04); + else + reg_w(sd, OV519_R12_X_OFFSETL, 0x00); reg_w(sd, OV519_R13_X_OFFSETH, 0x00); reg_w(sd, OV519_R14_Y_OFFSETL, 0x00); reg_w(sd, OV519_R15_Y_OFFSETH, 0x00); @@ -1584,7 +2555,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd) int qvga; gspca_dev = &sd->gspca_dev; - qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; + qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1; /******** Mode (VGA/QVGA) and sensor specific regs ********/ switch (sd->sensor) { @@ -1612,30 +2583,16 @@ static int mode_init_ov_sensor_regs(struct sd *sd) #endif break; case SEN_OV7620: -/* i2c_w(sd, 0x2b, 0x00); */ - i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); - i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20); - i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a); - i2c_w(sd, 0x25, qvga ? 0x30 : 0x60); - i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40); - i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0); - i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20); - break; case SEN_OV76BE: -/* i2c_w(sd, 0x2b, 0x00); */ i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); -#if 0 - /* FIXME: Enable this once 7620AE uses 7620 initial settings */ i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20); i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a); i2c_w(sd, 0x25, qvga ? 0x30 : 0x60); i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40); i2c_w_mask(sd, 0x67, qvga ? 0xb0 : 0x90, 0xf0); i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20); -#endif break; case SEN_OV7640: -/* i2c_w(sd, 0x2b, 0x00); */ i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20); /* i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a); */ @@ -1654,6 +2611,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd) break; case SEN_OV6620: case SEN_OV6630: + case SEN_OV66308AF: i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); break; default: @@ -1661,10 +2619,6 @@ static int mode_init_ov_sensor_regs(struct sd *sd) } /******** Palette-specific regs ********/ - if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) { - /* not valid on the OV6620/OV7620/6630? */ - i2c_w_mask(sd, 0x0e, 0x00, 0x40); - } /* The OV518 needs special treatment. Although both the OV518 * and the OV6630 support a 16-bit video bus, only the 8 bit Y @@ -1674,25 +2628,12 @@ static int mode_init_ov_sensor_regs(struct sd *sd) /* OV7640 is 8-bit only */ - if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV7640) + if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV66308AF && + sd->sensor != SEN_OV7640) i2c_w_mask(sd, 0x13, 0x00, 0x20); /******** Clock programming ********/ - /* The OV6620 needs special handling. This prevents the - * severe banding that normally occurs */ - if (sd->sensor == SEN_OV6620) { - - /* Clock down */ - i2c_w(sd, 0x2a, 0x04); - i2c_w(sd, 0x11, sd->clockdiv); - i2c_w(sd, 0x2a, 0x84); - /* This next setting is critical. It seems to improve - * the gain or the contrast. The "reserved" bits seem - * to have some effect in this case. */ - i2c_w(sd, 0x2d, 0x85); - } else { - i2c_w(sd, 0x11, sd->clockdiv); - } + i2c_w(sd, 0x11, sd->clockdiv); /******** Special Features ********/ /* no evidence this is possible with OV7670, either */ @@ -1736,13 +2677,14 @@ static void sethvflip(struct sd *sd) static int set_ov_sensor_window(struct sd *sd) { struct gspca_dev *gspca_dev; - int qvga; + int qvga, crop; int hwsbase, hwebase, vwsbase, vwebase, hwscale, vwscale; int ret, hstart, hstop, vstop, vstart; __u8 v; gspca_dev = &sd->gspca_dev; - qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; + qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1; + crop = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 2; /* The different sensor ICs handle setting up of window differently. * IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!! */ @@ -1761,10 +2703,20 @@ static int set_ov_sensor_window(struct sd *sd) break; case SEN_OV6620: case SEN_OV6630: + case SEN_OV66308AF: hwsbase = 0x38; hwebase = 0x3a; vwsbase = 0x05; vwebase = 0x06; + if (sd->sensor == SEN_OV66308AF && qvga) + /* HDG: this fixes U and V getting swapped */ + hwsbase++; + if (crop) { + hwsbase += 8; + hwebase += 8; + vwsbase += 11; + vwebase += 11; + } break; case SEN_OV7620: hwsbase = 0x2f; /* From 7620.SET (spec is wrong) */ @@ -1788,6 +2740,7 @@ static int set_ov_sensor_window(struct sd *sd) switch (sd->sensor) { case SEN_OV6620: case SEN_OV6630: + case SEN_OV66308AF: if (qvga) { /* QCIF */ hwscale = 0; vwscale = 0; @@ -1840,7 +2793,7 @@ static int set_ov_sensor_window(struct sd *sd) if (qvga) { /* QVGA from ov7670.c by * Jonathan Corbet */ hstart = 164; - hstop = 20; + hstop = 28; vstart = 14; vstop = 494; } else { /* VGA */ @@ -1866,7 +2819,6 @@ static int set_ov_sensor_window(struct sd *sd) msleep(10); /* need to sleep between read and write to * same reg! */ i2c_w(sd, OV7670_REG_VREF, v); - sethvflip(sd); } else { i2c_w(sd, 0x17, hwsbase); i2c_w(sd, 0x18, hwebase + (sd->gspca_dev.width >> hwscale)); @@ -1880,15 +2832,35 @@ static int set_ov_sensor_window(struct sd *sd) static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - int ret; + int ret = 0; - ret = ov519_mode_init_regs(sd); + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + ret = ov511_mode_init_regs(sd); + break; + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + ret = ov518_mode_init_regs(sd); + break; + case BRIDGE_OV519: + ret = ov519_mode_init_regs(sd); + break; + } if (ret < 0) goto out; + ret = set_ov_sensor_window(sd); if (ret < 0) goto out; + setcontrast(gspca_dev); + setbrightness(gspca_dev); + setcolors(gspca_dev); + sethvflip(sd); + setautobrightness(sd); + setfreq(sd); + ret = ov51x_restart(sd); if (ret < 0) goto out; @@ -1907,7 +2879,95 @@ static void sd_stopN(struct gspca_dev *gspca_dev) ov51x_led_control(sd, 0); } -static void sd_pkt_scan(struct gspca_dev *gspca_dev, +static void ov511_pkt_scan(struct gspca_dev *gspca_dev, + struct gspca_frame *frame, /* target */ + __u8 *in, /* isoc packet */ + int len) /* iso packet length */ +{ + struct sd *sd = (struct sd *) gspca_dev; + + /* SOF/EOF packets have 1st to 8th bytes zeroed and the 9th + * byte non-zero. The EOF packet has image width/height in the + * 10th and 11th bytes. The 9th byte is given as follows: + * + * bit 7: EOF + * 6: compression enabled + * 5: 422/420/400 modes + * 4: 422/420/400 modes + * 3: 1 + * 2: snapshot button on + * 1: snapshot frame + * 0: even/odd field + */ + if (!(in[0] | in[1] | in[2] | in[3] | in[4] | in[5] | in[6] | in[7]) && + (in[8] & 0x08)) { + if (in[8] & 0x80) { + /* Frame end */ + if ((in[9] + 1) * 8 != gspca_dev->width || + (in[10] + 1) * 8 != gspca_dev->height) { + PDEBUG(D_ERR, "Invalid frame size, got: %dx%d," + " requested: %dx%d\n", + (in[9] + 1) * 8, (in[10] + 1) * 8, + gspca_dev->width, gspca_dev->height); + gspca_dev->last_packet_type = DISCARD_PACKET; + return; + } + /* Add 11 byte footer to frame, might be usefull */ + gspca_frame_add(gspca_dev, LAST_PACKET, frame, in, 11); + return; + } else { + /* Frame start */ + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, in, 0); + sd->packet_nr = 0; + } + } + + /* Ignore the packet number */ + len--; + + /* intermediate packet */ + gspca_frame_add(gspca_dev, INTER_PACKET, frame, in, len); +} + +static void ov518_pkt_scan(struct gspca_dev *gspca_dev, + struct gspca_frame *frame, /* target */ + __u8 *data, /* isoc packet */ + int len) /* iso packet length */ +{ + struct sd *sd = (struct sd *) gspca_dev; + + /* A false positive here is likely, until OVT gives me + * the definitive SOF/EOF format */ + if ((!(data[0] | data[1] | data[2] | data[3] | data[5])) && data[6]) { + gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0); + sd->packet_nr = 0; + } + + if (gspca_dev->last_packet_type == DISCARD_PACKET) + return; + + /* Does this device use packet numbers ? */ + if (len & 7) { + len--; + if (sd->packet_nr == data[len]) + sd->packet_nr++; + /* The last few packets of the frame (which are all 0's + except that they may contain part of the footer), are + numbered 0 */ + else if (sd->packet_nr == 0 || data[len]) { + PDEBUG(D_ERR, "Invalid packet nr: %d (expect: %d)", + (int)data[len], (int)sd->packet_nr); + gspca_dev->last_packet_type = DISCARD_PACKET; + return; + } + } + + /* intermediate packet */ + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); +} + +static void ov519_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ __u8 *data, /* isoc packet */ int len) /* iso packet length */ @@ -1951,6 +3011,28 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, data, len); } +static void sd_pkt_scan(struct gspca_dev *gspca_dev, + struct gspca_frame *frame, /* target */ + __u8 *data, /* isoc packet */ + int len) /* iso packet length */ +{ + struct sd *sd = (struct sd *) gspca_dev; + + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + ov511_pkt_scan(gspca_dev, frame, data, len); + break; + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + ov518_pkt_scan(gspca_dev, frame, data, len); + break; + case BRIDGE_OV519: + ov519_pkt_scan(gspca_dev, frame, data, len); + break; + } +} + /* -- management routines -- */ static void setbrightness(struct gspca_dev *gspca_dev) @@ -1965,13 +3047,13 @@ static void setbrightness(struct gspca_dev *gspca_dev) case SEN_OV76BE: case SEN_OV6620: case SEN_OV6630: + case SEN_OV66308AF: case SEN_OV7640: i2c_w(sd, OV7610_REG_BRT, val); break; case SEN_OV7620: /* 7620 doesn't like manual changes when in auto mode */ -/*fixme - * if (!sd->auto_brt) */ + if (!sd->autobrightness) i2c_w(sd, OV7610_REG_BRT, val); break; case SEN_OV7670: @@ -1994,7 +3076,9 @@ static void setcontrast(struct gspca_dev *gspca_dev) i2c_w(sd, OV7610_REG_CNT, val); break; case SEN_OV6630: + case SEN_OV66308AF: i2c_w_mask(sd, OV7610_REG_CNT, val >> 4, 0x0f); + break; case SEN_OV8610: { static const __u8 ctab[] = { 0x03, 0x09, 0x0b, 0x0f, 0x53, 0x6f, 0x35, 0x7f @@ -2037,6 +3121,7 @@ static void setcolors(struct gspca_dev *gspca_dev) case SEN_OV76BE: case SEN_OV6620: case SEN_OV6630: + case SEN_OV66308AF: i2c_w(sd, OV7610_REG_SAT, val); break; case SEN_OV7620: @@ -2057,6 +3142,72 @@ static void setcolors(struct gspca_dev *gspca_dev) } } +static void setautobrightness(struct sd *sd) +{ + if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670) + return; + + i2c_w_mask(sd, 0x2d, sd->autobrightness ? 0x10 : 0x00, 0x10); +} + +static void setfreq(struct sd *sd) +{ + if (sd->sensor == SEN_OV7670) { + switch (sd->freq) { + case 0: /* Banding filter disabled */ + i2c_w_mask(sd, OV7670_REG_COM8, 0, OV7670_COM8_BFILT); + break; + case 1: /* 50 hz */ + i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT, + OV7670_COM8_BFILT); + i2c_w_mask(sd, OV7670_REG_COM11, 0x08, 0x18); + break; + case 2: /* 60 hz */ + i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT, + OV7670_COM8_BFILT); + i2c_w_mask(sd, OV7670_REG_COM11, 0x00, 0x18); + break; + case 3: /* Auto hz */ + i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT, + OV7670_COM8_BFILT); + i2c_w_mask(sd, OV7670_REG_COM11, OV7670_COM11_HZAUTO, + 0x18); + break; + } + } else { + switch (sd->freq) { + case 0: /* Banding filter disabled */ + i2c_w_mask(sd, 0x2d, 0x00, 0x04); + i2c_w_mask(sd, 0x2a, 0x00, 0x80); + break; + case 1: /* 50 hz (filter on and framerate adj) */ + i2c_w_mask(sd, 0x2d, 0x04, 0x04); + i2c_w_mask(sd, 0x2a, 0x80, 0x80); + /* 20 fps -> 16.667 fps */ + if (sd->sensor == SEN_OV6620 || + sd->sensor == SEN_OV6630 || + sd->sensor == SEN_OV66308AF) + i2c_w(sd, 0x2b, 0x5e); + else + i2c_w(sd, 0x2b, 0xac); + break; + case 2: /* 60 hz (filter on, ...) */ + i2c_w_mask(sd, 0x2d, 0x04, 0x04); + if (sd->sensor == SEN_OV6620 || + sd->sensor == SEN_OV6630 || + sd->sensor == SEN_OV66308AF) { + /* 20 fps -> 15 fps */ + i2c_w_mask(sd, 0x2a, 0x80, 0x80); + i2c_w(sd, 0x2b, 0xa8); + } else { + /* no framerate adj. */ + i2c_w_mask(sd, 0x2a, 0x00, 0x80); + } + break; + } + } +} + static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; @@ -2147,6 +3298,71 @@ static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val) return 0; } +static int sd_setautobrightness(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->autobrightness = val; + if (gspca_dev->streaming) + setautobrightness(sd); + return 0; +} + +static int sd_getautobrightness(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->autobrightness; + return 0; +} + +static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->freq = val; + if (gspca_dev->streaming) + setfreq(sd); + return 0; +} + +static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->freq; + return 0; +} + +static int sd_querymenu(struct gspca_dev *gspca_dev, + struct v4l2_querymenu *menu) +{ + struct sd *sd = (struct sd *) gspca_dev; + + switch (menu->id) { + case V4L2_CID_POWER_LINE_FREQUENCY: + switch (menu->index) { + case 0: /* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */ + strcpy((char *) menu->name, "NoFliker"); + return 0; + case 1: /* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */ + strcpy((char *) menu->name, "50 Hz"); + return 0; + case 2: /* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */ + strcpy((char *) menu->name, "60 Hz"); + return 0; + case 3: + if (sd->sensor != SEN_OV7670) + return -EINVAL; + + strcpy((char *) menu->name, "Automatic"); + return 0; + } + break; + } + return -EINVAL; +} + /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, @@ -2157,23 +3373,31 @@ static const struct sd_desc sd_desc = { .start = sd_start, .stopN = sd_stopN, .pkt_scan = sd_pkt_scan, + .querymenu = sd_querymenu, }; /* -- module initialisation -- */ static const __devinitdata struct usb_device_id device_table[] = { - {USB_DEVICE(0x041e, 0x4052)}, - {USB_DEVICE(0x041e, 0x405f)}, - {USB_DEVICE(0x041e, 0x4060)}, - {USB_DEVICE(0x041e, 0x4061)}, - {USB_DEVICE(0x041e, 0x4064)}, - {USB_DEVICE(0x041e, 0x4068)}, - {USB_DEVICE(0x045e, 0x028c)}, - {USB_DEVICE(0x054c, 0x0154)}, - {USB_DEVICE(0x054c, 0x0155)}, - {USB_DEVICE(0x05a9, 0x0519)}, - {USB_DEVICE(0x05a9, 0x0530)}, - {USB_DEVICE(0x05a9, 0x4519)}, - {USB_DEVICE(0x05a9, 0x8519)}, + {USB_DEVICE(0x041e, 0x4052), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x041e, 0x4064), + .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, + {USB_DEVICE(0x041e, 0x4068), + .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, + {USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x054c, 0x0154), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x054c, 0x0155), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0x0511), .driver_info = BRIDGE_OV511 }, + {USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 }, + {USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0x0530), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0x4519), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0x8519), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0xa511), .driver_info = BRIDGE_OV511PLUS }, + {USB_DEVICE(0x05a9, 0xa518), .driver_info = BRIDGE_OV518PLUS }, + {USB_DEVICE(0x0813, 0x0002), .driver_info = BRIDGE_OV511PLUS }, {} }; diff --git a/linux/drivers/media/video/gspca/ov534.c b/linux/drivers/media/video/gspca/ov534.c index 14341b6be..21a9366c7 100644 --- a/linux/drivers/media/video/gspca/ov534.c +++ b/linux/drivers/media/video/gspca/ov534.c @@ -958,9 +958,11 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, __u32 this_pts; u16 this_fid; int remaining_len = len; + int payload_len; + payload_len = gspca_dev->cam.bulk ? 2048 : 2040; do { - len = min(remaining_len, 2040); /*fixme: was 2048*/ + len = min(remaining_len, payload_len); /* Payloads are prefixed with a UVC-style header. We consider a frame to start when the FID toggles, or the PTS diff --git a/linux/drivers/media/video/gspca/pac7311.c b/linux/drivers/media/video/gspca/pac7311.c index 6a857805a..ed10134c9 100644 --- a/linux/drivers/media/video/gspca/pac7311.c +++ b/linux/drivers/media/video/gspca/pac7311.c @@ -1082,6 +1082,7 @@ static __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x2622), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x2626), .driver_info = SENSOR_PAC7302}, + {USB_DEVICE(0x093a, 0x2629), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x262a), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x262c), .driver_info = SENSOR_PAC7302}, {} diff --git a/linux/drivers/media/video/gspca/sn9c20x.c b/linux/drivers/media/video/gspca/sn9c20x.c new file mode 100644 index 000000000..a516866a2 --- /dev/null +++ b/linux/drivers/media/video/gspca/sn9c20x.c @@ -0,0 +1,2439 @@ +/* + * Sonix sn9c201 sn9c202 library + * Copyright (C) 2008-2009 microdia project <microdia@googlegroups.com> + * Copyright (C) 2009 Brian Johnson <brijohn@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV +#include <linux/kthread.h> +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20) +#include <linux/freezer.h> +#endif +#include <linux/usb/input.h> +#include <linux/input.h> +#endif + +#include "gspca.h" +#include "jpeg.h" +#include "compat.h" + +#include <media/v4l2-chip-ident.h> + +MODULE_AUTHOR("Brian Johnson <brijohn@gmail.com>, " + "microdia project <microdia@googlegroups.com>"); +MODULE_DESCRIPTION("GSPCA/SN9C20X USB Camera Driver"); +MODULE_LICENSE("GPL"); + +#define MODULE_NAME "sn9c20x" + +#define MODE_RAW 0x10 +#define MODE_JPEG 0x20 +#define MODE_SXGA 0x80 + +#define SENSOR_OV9650 0 +#define SENSOR_OV9655 1 +#define SENSOR_SOI968 2 +#define SENSOR_OV7660 3 +#define SENSOR_OV7670 4 +#define SENSOR_MT9V011 5 +#define SENSOR_MT9V111 6 +#define SENSOR_MT9V112 7 +#define SENSOR_MT9M001 8 +#define SENSOR_MT9M111 9 +#define SENSOR_HV7131R 10 +#define SENSOR_MT9VPRB 20 + +/* specific webcam descriptor */ +struct sd { + struct gspca_dev gspca_dev; + +#define MIN_AVG_LUM 80 +#define MAX_AVG_LUM 130 + atomic_t avg_lum; + u8 old_step; + u8 older_step; + u8 exposure_step; + + u8 brightness; + u8 contrast; + u8 saturation; + s16 hue; + u8 gamma; + u8 red; + u8 blue; + + u8 hflip; + u8 vflip; + u8 gain; + u16 exposure; + u8 auto_exposure; + + u8 i2c_addr; + u8 sensor; + u8 hstart; + u8 vstart; + + u8 *jpeg_hdr; + u8 quality; + +#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV + struct input_dev *input_dev; + u8 input_gpio; + struct task_struct *input_task; +#endif +}; + +static int sd_setbrightness(struct gspca_dev *gspca_dev, s32 val); +static int sd_getbrightness(struct gspca_dev *gspca_dev, s32 *val); +static int sd_setcontrast(struct gspca_dev *gspca_dev, s32 val); +static int sd_getcontrast(struct gspca_dev *gspca_dev, s32 *val); +static int sd_setsaturation(struct gspca_dev *gspca_dev, s32 val); +static int sd_getsaturation(struct gspca_dev *gspca_dev, s32 *val); +static int sd_sethue(struct gspca_dev *gspca_dev, s32 val); +static int sd_gethue(struct gspca_dev *gspca_dev, s32 *val); +static int sd_setgamma(struct gspca_dev *gspca_dev, s32 val); +static int sd_getgamma(struct gspca_dev *gspca_dev, s32 *val); +static int sd_setredbalance(struct gspca_dev *gspca_dev, s32 val); +static int sd_getredbalance(struct gspca_dev *gspca_dev, s32 *val); +static int sd_setbluebalance(struct gspca_dev *gspca_dev, s32 val); +static int sd_getbluebalance(struct gspca_dev *gspca_dev, s32 *val); +static int sd_setvflip(struct gspca_dev *gspca_dev, s32 val); +static int sd_getvflip(struct gspca_dev *gspca_dev, s32 *val); +static int sd_sethflip(struct gspca_dev *gspca_dev, s32 val); +static int sd_gethflip(struct gspca_dev *gspca_dev, s32 *val); +static int sd_setgain(struct gspca_dev *gspca_dev, s32 val); +static int sd_getgain(struct gspca_dev *gspca_dev, s32 *val); +static int sd_setexposure(struct gspca_dev *gspca_dev, s32 val); +static int sd_getexposure(struct gspca_dev *gspca_dev, s32 *val); +static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val); +static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val); + +static struct ctrl sd_ctrls[] = { + { +#define BRIGHTNESS_IDX 0 + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = 0, + .maximum = 0xff, + .step = 1, +#define BRIGHTNESS_DEFAULT 0x7f + .default_value = BRIGHTNESS_DEFAULT, + }, + .set = sd_setbrightness, + .get = sd_getbrightness, + }, + { +#define CONTRAST_IDX 1 + { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Contrast", + .minimum = 0, + .maximum = 0xff, + .step = 1, +#define CONTRAST_DEFAULT 0x7f + .default_value = CONTRAST_DEFAULT, + }, + .set = sd_setcontrast, + .get = sd_getcontrast, + }, + { +#define SATURATION_IDX 2 + { + .id = V4L2_CID_SATURATION, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Saturation", + .minimum = 0, + .maximum = 0xff, + .step = 1, +#define SATURATION_DEFAULT 0x7f + .default_value = SATURATION_DEFAULT, + }, + .set = sd_setsaturation, + .get = sd_getsaturation, + }, + { +#define HUE_IDX 3 + { + .id = V4L2_CID_HUE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Hue", + .minimum = -180, + .maximum = 180, + .step = 1, +#define HUE_DEFAULT 0 + .default_value = HUE_DEFAULT, + }, + .set = sd_sethue, + .get = sd_gethue, + }, + { +#define GAMMA_IDX 4 + { + .id = V4L2_CID_GAMMA, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gamma", + .minimum = 0, + .maximum = 0xff, + .step = 1, +#define GAMMA_DEFAULT 0x10 + .default_value = GAMMA_DEFAULT, + }, + .set = sd_setgamma, + .get = sd_getgamma, + }, + { +#define BLUE_IDX 5 + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Blue Balance", + .minimum = 0, + .maximum = 0x7f, + .step = 1, +#define BLUE_DEFAULT 0x28 + .default_value = BLUE_DEFAULT, + }, + .set = sd_setbluebalance, + .get = sd_getbluebalance, + }, + { +#define RED_IDX 6 + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Red Balance", + .minimum = 0, + .maximum = 0x7f, + .step = 1, +#define RED_DEFAULT 0x28 + .default_value = RED_DEFAULT, + }, + .set = sd_setredbalance, + .get = sd_getredbalance, + }, + { +#define HFLIP_IDX 7 + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Horizontal Flip", + .minimum = 0, + .maximum = 1, + .step = 1, +#define HFLIP_DEFAULT 0 + .default_value = HFLIP_DEFAULT, + }, + .set = sd_sethflip, + .get = sd_gethflip, + }, + { +#define VFLIP_IDX 8 + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Vertical Flip", + .minimum = 0, + .maximum = 1, + .step = 1, +#define VFLIP_DEFAULT 0 + .default_value = VFLIP_DEFAULT, + }, + .set = sd_setvflip, + .get = sd_getvflip, + }, + { +#define EXPOSURE_IDX 9 + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 0, + .maximum = 0x1780, + .step = 1, +#define EXPOSURE_DEFAULT 0x33 + .default_value = EXPOSURE_DEFAULT, + }, + .set = sd_setexposure, + .get = sd_getexposure, + }, + { +#define GAIN_IDX 10 + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 28, + .step = 1, +#define GAIN_DEFAULT 0x00 + .default_value = GAIN_DEFAULT, + }, + .set = sd_setgain, + .get = sd_getgain, + }, + { +#define AUTOGAIN_IDX 11 + { + .id = V4L2_CID_AUTOGAIN, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto Exposure", + .minimum = 0, + .maximum = 1, + .step = 1, +#define AUTO_EXPOSURE_DEFAULT 1 + .default_value = AUTO_EXPOSURE_DEFAULT, + }, + .set = sd_setautoexposure, + .get = sd_getautoexposure, + }, +}; + +static const struct v4l2_pix_format vga_mode[] = { + {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 240, + .sizeimage = 240 * 120, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0 | MODE_JPEG}, + {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 160 * 120, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0 | MODE_RAW}, + {160, 120, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE, + .bytesperline = 240, + .sizeimage = 240 * 120, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0}, + {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 480, + .sizeimage = 480 * 240 , + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1 | MODE_JPEG}, + {320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 , + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 | MODE_RAW}, + {320, 240, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE, + .bytesperline = 480, + .sizeimage = 480 * 240 , + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1}, + {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 960, + .sizeimage = 960 * 480, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 2 | MODE_JPEG}, + {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 2 | MODE_RAW}, + {640, 480, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE, + .bytesperline = 960, + .sizeimage = 960 * 480, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 2}, +}; + +static const struct v4l2_pix_format sxga_mode[] = { + {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 240, + .sizeimage = 240 * 120, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0 | MODE_JPEG}, + {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 160 * 120, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0 | MODE_RAW}, + {160, 120, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE, + .bytesperline = 240, + .sizeimage = 240 * 120, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0}, + {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 480, + .sizeimage = 480 * 240 , + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1 | MODE_JPEG}, + {320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 , + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 | MODE_RAW}, + {320, 240, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE, + .bytesperline = 480, + .sizeimage = 480 * 240 , + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1}, + {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 960, + .sizeimage = 960 * 480, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 2 | MODE_JPEG}, + {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 2 | MODE_RAW}, + {640, 480, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE, + .bytesperline = 960, + .sizeimage = 960 * 480, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 2}, + {1280, 1024, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 1280, + .sizeimage = (1280 * 1024) + 64, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 3 | MODE_RAW | MODE_SXGA}, +}; + +static const int hsv_red_x[] = { + 41, 44, 46, 48, 50, 52, 54, 56, + 58, 60, 62, 64, 66, 68, 70, 72, + 74, 76, 78, 80, 81, 83, 85, 87, + 88, 90, 92, 93, 95, 97, 98, 100, + 101, 102, 104, 105, 107, 108, 109, 110, + 112, 113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123, 123, 124, 125, 125, + 126, 127, 127, 128, 128, 129, 129, 129, + 130, 130, 130, 130, 131, 131, 131, 131, + 131, 131, 131, 131, 130, 130, 130, 130, + 129, 129, 129, 128, 128, 127, 127, 126, + 125, 125, 124, 123, 122, 122, 121, 120, + 119, 118, 117, 116, 115, 114, 112, 111, + 110, 109, 107, 106, 105, 103, 102, 101, + 99, 98, 96, 94, 93, 91, 90, 88, + 86, 84, 83, 81, 79, 77, 75, 74, + 72, 70, 68, 66, 64, 62, 60, 58, + 56, 54, 52, 49, 47, 45, 43, 41, + 39, 36, 34, 32, 30, 28, 25, 23, + 21, 19, 16, 14, 12, 9, 7, 5, + 3, 0, -1, -3, -6, -8, -10, -12, + -15, -17, -19, -22, -24, -26, -28, -30, + -33, -35, -37, -39, -41, -44, -46, -48, + -50, -52, -54, -56, -58, -60, -62, -64, + -66, -68, -70, -72, -74, -76, -78, -80, + -81, -83, -85, -87, -88, -90, -92, -93, + -95, -97, -98, -100, -101, -102, -104, -105, + -107, -108, -109, -110, -112, -113, -114, -115, + -116, -117, -118, -119, -120, -121, -122, -123, + -123, -124, -125, -125, -126, -127, -127, -128, + -128, -128, -128, -128, -128, -128, -128, -128, + -128, -128, -128, -128, -128, -128, -128, -128, + -128, -128, -128, -128, -128, -128, -128, -128, + -128, -127, -127, -126, -125, -125, -124, -123, + -122, -122, -121, -120, -119, -118, -117, -116, + -115, -114, -112, -111, -110, -109, -107, -106, + -105, -103, -102, -101, -99, -98, -96, -94, + -93, -91, -90, -88, -86, -84, -83, -81, + -79, -77, -75, -74, -72, -70, -68, -66, + -64, -62, -60, -58, -56, -54, -52, -49, + -47, -45, -43, -41, -39, -36, -34, -32, + -30, -28, -25, -23, -21, -19, -16, -14, + -12, -9, -7, -5, -3, 0, 1, 3, + 6, 8, 10, 12, 15, 17, 19, 22, + 24, 26, 28, 30, 33, 35, 37, 39, 41 +}; + +static const int hsv_red_y[] = { + 82, 80, 78, 76, 74, 73, 71, 69, + 67, 65, 63, 61, 58, 56, 54, 52, + 50, 48, 46, 44, 41, 39, 37, 35, + 32, 30, 28, 26, 23, 21, 19, 16, + 14, 12, 10, 7, 5, 3, 0, -1, + -3, -6, -8, -10, -13, -15, -17, -19, + -22, -24, -26, -29, -31, -33, -35, -38, + -40, -42, -44, -46, -48, -51, -53, -55, + -57, -59, -61, -63, -65, -67, -69, -71, + -73, -75, -77, -79, -81, -82, -84, -86, + -88, -89, -91, -93, -94, -96, -98, -99, + -101, -102, -104, -105, -106, -108, -109, -110, + -112, -113, -114, -115, -116, -117, -119, -120, + -120, -121, -122, -123, -124, -125, -126, -126, + -127, -128, -128, -128, -128, -128, -128, -128, + -128, -128, -128, -128, -128, -128, -128, -128, + -128, -128, -128, -128, -128, -128, -128, -128, + -128, -128, -128, -128, -128, -128, -128, -128, + -127, -127, -126, -125, -125, -124, -123, -122, + -121, -120, -119, -118, -117, -116, -115, -114, + -113, -111, -110, -109, -107, -106, -105, -103, + -102, -100, -99, -97, -96, -94, -92, -91, + -89, -87, -85, -84, -82, -80, -78, -76, + -74, -73, -71, -69, -67, -65, -63, -61, + -58, -56, -54, -52, -50, -48, -46, -44, + -41, -39, -37, -35, -32, -30, -28, -26, + -23, -21, -19, -16, -14, -12, -10, -7, + -5, -3, 0, 1, 3, 6, 8, 10, + 13, 15, 17, 19, 22, 24, 26, 29, + 31, 33, 35, 38, 40, 42, 44, 46, + 48, 51, 53, 55, 57, 59, 61, 63, + 65, 67, 69, 71, 73, 75, 77, 79, + 81, 82, 84, 86, 88, 89, 91, 93, + 94, 96, 98, 99, 101, 102, 104, 105, + 106, 108, 109, 110, 112, 113, 114, 115, + 116, 117, 119, 120, 120, 121, 122, 123, + 124, 125, 126, 126, 127, 128, 128, 129, + 129, 130, 130, 131, 131, 131, 131, 132, + 132, 132, 132, 132, 132, 132, 132, 132, + 132, 132, 132, 131, 131, 131, 130, 130, + 130, 129, 129, 128, 127, 127, 126, 125, + 125, 124, 123, 122, 121, 120, 119, 118, + 117, 116, 115, 114, 113, 111, 110, 109, + 107, 106, 105, 103, 102, 100, 99, 97, + 96, 94, 92, 91, 89, 87, 85, 84, 82 +}; + +static const int hsv_green_x[] = { + -124, -124, -125, -125, -125, -125, -125, -125, + -125, -126, -126, -125, -125, -125, -125, -125, + -125, -124, -124, -124, -123, -123, -122, -122, + -121, -121, -120, -120, -119, -118, -117, -117, + -116, -115, -114, -113, -112, -111, -110, -109, + -108, -107, -105, -104, -103, -102, -100, -99, + -98, -96, -95, -93, -92, -91, -89, -87, + -86, -84, -83, -81, -79, -77, -76, -74, + -72, -70, -69, -67, -65, -63, -61, -59, + -57, -55, -53, -51, -49, -47, -45, -43, + -41, -39, -37, -35, -33, -30, -28, -26, + -24, -22, -20, -18, -15, -13, -11, -9, + -7, -4, -2, 0, 1, 3, 6, 8, + 10, 12, 14, 17, 19, 21, 23, 25, + 27, 29, 32, 34, 36, 38, 40, 42, + 44, 46, 48, 50, 52, 54, 56, 58, + 60, 62, 64, 66, 68, 70, 71, 73, + 75, 77, 78, 80, 82, 83, 85, 87, + 88, 90, 91, 93, 94, 96, 97, 98, + 100, 101, 102, 104, 105, 106, 107, 108, + 109, 111, 112, 113, 113, 114, 115, 116, + 117, 118, 118, 119, 120, 120, 121, 122, + 122, 123, 123, 124, 124, 124, 125, 125, + 125, 125, 125, 125, 125, 126, 126, 125, + 125, 125, 125, 125, 125, 124, 124, 124, + 123, 123, 122, 122, 121, 121, 120, 120, + 119, 118, 117, 117, 116, 115, 114, 113, + 112, 111, 110, 109, 108, 107, 105, 104, + 103, 102, 100, 99, 98, 96, 95, 93, + 92, 91, 89, 87, 86, 84, 83, 81, + 79, 77, 76, 74, 72, 70, 69, 67, + 65, 63, 61, 59, 57, 55, 53, 51, + 49, 47, 45, 43, 41, 39, 37, 35, + 33, 30, 28, 26, 24, 22, 20, 18, + 15, 13, 11, 9, 7, 4, 2, 0, + -1, -3, -6, -8, -10, -12, -14, -17, + -19, -21, -23, -25, -27, -29, -32, -34, + -36, -38, -40, -42, -44, -46, -48, -50, + -52, -54, -56, -58, -60, -62, -64, -66, + -68, -70, -71, -73, -75, -77, -78, -80, + -82, -83, -85, -87, -88, -90, -91, -93, + -94, -96, -97, -98, -100, -101, -102, -104, + -105, -106, -107, -108, -109, -111, -112, -113, + -113, -114, -115, -116, -117, -118, -118, -119, + -120, -120, -121, -122, -122, -123, -123, -124, -124 +}; + +static const int hsv_green_y[] = { + -100, -99, -98, -97, -95, -94, -93, -91, + -90, -89, -87, -86, -84, -83, -81, -80, + -78, -76, -75, -73, -71, -70, -68, -66, + -64, -63, -61, -59, -57, -55, -53, -51, + -49, -48, -46, -44, -42, -40, -38, -36, + -34, -32, -30, -27, -25, -23, -21, -19, + -17, -15, -13, -11, -9, -7, -4, -2, + 0, 1, 3, 5, 7, 9, 11, 14, + 16, 18, 20, 22, 24, 26, 28, 30, + 32, 34, 36, 38, 40, 42, 44, 46, + 48, 50, 52, 54, 56, 58, 59, 61, + 63, 65, 67, 68, 70, 72, 74, 75, + 77, 78, 80, 82, 83, 85, 86, 88, + 89, 90, 92, 93, 95, 96, 97, 98, + 100, 101, 102, 103, 104, 105, 106, 107, + 108, 109, 110, 111, 112, 112, 113, 114, + 115, 115, 116, 116, 117, 117, 118, 118, + 119, 119, 119, 120, 120, 120, 120, 120, + 121, 121, 121, 121, 121, 121, 120, 120, + 120, 120, 120, 119, 119, 119, 118, 118, + 117, 117, 116, 116, 115, 114, 114, 113, + 112, 111, 111, 110, 109, 108, 107, 106, + 105, 104, 103, 102, 100, 99, 98, 97, + 95, 94, 93, 91, 90, 89, 87, 86, + 84, 83, 81, 80, 78, 76, 75, 73, + 71, 70, 68, 66, 64, 63, 61, 59, + 57, 55, 53, 51, 49, 48, 46, 44, + 42, 40, 38, 36, 34, 32, 30, 27, + 25, 23, 21, 19, 17, 15, 13, 11, + 9, 7, 4, 2, 0, -1, -3, -5, + -7, -9, -11, -14, -16, -18, -20, -22, + -24, -26, -28, -30, -32, -34, -36, -38, + -40, -42, -44, -46, -48, -50, -52, -54, + -56, -58, -59, -61, -63, -65, -67, -68, + -70, -72, -74, -75, -77, -78, -80, -82, + -83, -85, -86, -88, -89, -90, -92, -93, + -95, -96, -97, -98, -100, -101, -102, -103, + -104, -105, -106, -107, -108, -109, -110, -111, + -112, -112, -113, -114, -115, -115, -116, -116, + -117, -117, -118, -118, -119, -119, -119, -120, + -120, -120, -120, -120, -121, -121, -121, -121, + -121, -121, -120, -120, -120, -120, -120, -119, + -119, -119, -118, -118, -117, -117, -116, -116, + -115, -114, -114, -113, -112, -111, -111, -110, + -109, -108, -107, -106, -105, -104, -103, -102, -100 +}; + +static const int hsv_blue_x[] = { + 112, 113, 114, 114, 115, 116, 117, 117, + 118, 118, 119, 119, 120, 120, 120, 121, + 121, 121, 122, 122, 122, 122, 122, 122, + 122, 122, 122, 122, 122, 122, 121, 121, + 121, 120, 120, 120, 119, 119, 118, 118, + 117, 116, 116, 115, 114, 113, 113, 112, + 111, 110, 109, 108, 107, 106, 105, 104, + 103, 102, 100, 99, 98, 97, 95, 94, + 93, 91, 90, 88, 87, 85, 84, 82, + 80, 79, 77, 76, 74, 72, 70, 69, + 67, 65, 63, 61, 60, 58, 56, 54, + 52, 50, 48, 46, 44, 42, 40, 38, + 36, 34, 32, 30, 28, 26, 24, 22, + 19, 17, 15, 13, 11, 9, 7, 5, + 2, 0, -1, -3, -5, -7, -9, -12, + -14, -16, -18, -20, -22, -24, -26, -28, + -31, -33, -35, -37, -39, -41, -43, -45, + -47, -49, -51, -53, -54, -56, -58, -60, + -62, -64, -66, -67, -69, -71, -73, -74, + -76, -78, -79, -81, -83, -84, -86, -87, + -89, -90, -92, -93, -94, -96, -97, -98, + -99, -101, -102, -103, -104, -105, -106, -107, + -108, -109, -110, -111, -112, -113, -114, -114, + -115, -116, -117, -117, -118, -118, -119, -119, + -120, -120, -120, -121, -121, -121, -122, -122, + -122, -122, -122, -122, -122, -122, -122, -122, + -122, -122, -121, -121, -121, -120, -120, -120, + -119, -119, -118, -118, -117, -116, -116, -115, + -114, -113, -113, -112, -111, -110, -109, -108, + -107, -106, -105, -104, -103, -102, -100, -99, + -98, -97, -95, -94, -93, -91, -90, -88, + -87, -85, -84, -82, -80, -79, -77, -76, + -74, -72, -70, -69, -67, -65, -63, -61, + -60, -58, -56, -54, -52, -50, -48, -46, + -44, -42, -40, -38, -36, -34, -32, -30, + -28, -26, -24, -22, -19, -17, -15, -13, + -11, -9, -7, -5, -2, 0, 1, 3, + 5, 7, 9, 12, 14, 16, 18, 20, + 22, 24, 26, 28, 31, 33, 35, 37, + 39, 41, 43, 45, 47, 49, 51, 53, + 54, 56, 58, 60, 62, 64, 66, 67, + 69, 71, 73, 74, 76, 78, 79, 81, + 83, 84, 86, 87, 89, 90, 92, 93, + 94, 96, 97, 98, 99, 101, 102, 103, + 104, 105, 106, 107, 108, 109, 110, 111, 112 +}; + +static const int hsv_blue_y[] = { + -11, -13, -15, -17, -19, -21, -23, -25, + -27, -29, -31, -33, -35, -37, -39, -41, + -43, -45, -46, -48, -50, -52, -54, -55, + -57, -59, -61, -62, -64, -66, -67, -69, + -71, -72, -74, -75, -77, -78, -80, -81, + -83, -84, -86, -87, -88, -90, -91, -92, + -93, -95, -96, -97, -98, -99, -100, -101, + -102, -103, -104, -105, -106, -106, -107, -108, + -109, -109, -110, -111, -111, -112, -112, -113, + -113, -114, -114, -114, -115, -115, -115, -115, + -116, -116, -116, -116, -116, -116, -116, -116, + -116, -115, -115, -115, -115, -114, -114, -114, + -113, -113, -112, -112, -111, -111, -110, -110, + -109, -108, -108, -107, -106, -105, -104, -103, + -102, -101, -100, -99, -98, -97, -96, -95, + -94, -93, -91, -90, -89, -88, -86, -85, + -84, -82, -81, -79, -78, -76, -75, -73, + -71, -70, -68, -67, -65, -63, -62, -60, + -58, -56, -55, -53, -51, -49, -47, -45, + -44, -42, -40, -38, -36, -34, -32, -30, + -28, -26, -24, -22, -20, -18, -16, -14, + -12, -10, -8, -6, -4, -2, 0, 1, + 3, 5, 7, 9, 11, 13, 15, 17, + 19, 21, 23, 25, 27, 29, 31, 33, + 35, 37, 39, 41, 43, 45, 46, 48, + 50, 52, 54, 55, 57, 59, 61, 62, + 64, 66, 67, 69, 71, 72, 74, 75, + 77, 78, 80, 81, 83, 84, 86, 87, + 88, 90, 91, 92, 93, 95, 96, 97, + 98, 99, 100, 101, 102, 103, 104, 105, + 106, 106, 107, 108, 109, 109, 110, 111, + 111, 112, 112, 113, 113, 114, 114, 114, + 115, 115, 115, 115, 116, 116, 116, 116, + 116, 116, 116, 116, 116, 115, 115, 115, + 115, 114, 114, 114, 113, 113, 112, 112, + 111, 111, 110, 110, 109, 108, 108, 107, + 106, 105, 104, 103, 102, 101, 100, 99, + 98, 97, 96, 95, 94, 93, 91, 90, + 89, 88, 86, 85, 84, 82, 81, 79, + 78, 76, 75, 73, 71, 70, 68, 67, + 65, 63, 62, 60, 58, 56, 55, 53, + 51, 49, 47, 45, 44, 42, 40, 38, + 36, 34, 32, 30, 28, 26, 24, 22, + 20, 18, 16, 14, 12, 10, 8, 6, + 4, 2, 0, -1, -3, -5, -7, -9, -11 +}; + +static u16 i2c_ident[] = { + V4L2_IDENT_OV9650, + V4L2_IDENT_OV9655, + V4L2_IDENT_SOI968, + V4L2_IDENT_OV7660, + V4L2_IDENT_OV7670, + V4L2_IDENT_MT9V011, + V4L2_IDENT_MT9V111, + V4L2_IDENT_MT9V112, + V4L2_IDENT_MT9M001C12ST, + V4L2_IDENT_MT9M111, + V4L2_IDENT_HV7131R, +}; + +static u16 bridge_init[][2] = { + {0x1000, 0x78}, {0x1001, 0x40}, {0x1002, 0x1c}, + {0x1020, 0x80}, {0x1061, 0x01}, {0x1067, 0x40}, + {0x1068, 0x30}, {0x1069, 0x20}, {0x106a, 0x10}, + {0x106b, 0x08}, {0x1188, 0x87}, {0x11a1, 0x00}, + {0x11a2, 0x00}, {0x11a3, 0x6a}, {0x11a4, 0x50}, + {0x11ab, 0x00}, {0x11ac, 0x00}, {0x11ad, 0x50}, + {0x11ae, 0x3c}, {0x118a, 0x04}, {0x0395, 0x04}, + {0x11b8, 0x3a}, {0x118b, 0x0e}, {0x10f7, 0x05}, + {0x10f8, 0x14}, {0x10fa, 0xff}, {0x10f9, 0x00}, + {0x11ba, 0x0a}, {0x11a5, 0x2d}, {0x11a6, 0x2d}, + {0x11a7, 0x3a}, {0x11a8, 0x05}, {0x11a9, 0x04}, + {0x11aa, 0x3f}, {0x11af, 0x28}, {0x11b0, 0xd8}, + {0x11b1, 0x14}, {0x11b2, 0xec}, {0x11b3, 0x32}, + {0x11b4, 0xdd}, {0x11b5, 0x32}, {0x11b6, 0xdd}, + {0x10e0, 0x2c}, {0x11bc, 0x40}, {0x11bd, 0x01}, + {0x11be, 0xf0}, {0x11bf, 0x00}, {0x118c, 0x1f}, + {0x118d, 0x1f}, {0x118e, 0x1f}, {0x118f, 0x1f}, + {0x1180, 0x01}, {0x1181, 0x00}, {0x1182, 0x01}, + {0x1183, 0x00}, {0x1184, 0x50}, {0x1185, 0x80} +}; + +/* Gain = (bit[3:0] / 16 + 1) * (bit[4] + 1) * (bit[5] + 1) * (bit[6] + 1) */ +static u8 ov_gain[] = { + 0x00 /* 1x */, 0x04 /* 1.25x */, 0x08 /* 1.5x */, 0x0c /* 1.75x */, + 0x10 /* 2x */, 0x12 /* 2.25x */, 0x14 /* 2.5x */, 0x16 /* 2.75x */, + 0x18 /* 3x */, 0x1a /* 3.25x */, 0x1c /* 3.5x */, 0x1e /* 3.75x */, + 0x30 /* 4x */, 0x31 /* 4.25x */, 0x32 /* 4.5x */, 0x33 /* 4.75x */, + 0x34 /* 5x */, 0x35 /* 5.25x */, 0x36 /* 5.5x */, 0x37 /* 5.75x */, + 0x38 /* 6x */, 0x39 /* 6.25x */, 0x3a /* 6.5x */, 0x3b /* 6.75x */, + 0x3c /* 7x */, 0x3d /* 7.25x */, 0x3e /* 7.5x */, 0x3f /* 7.75x */, + 0x70 /* 8x */ +}; + +/* Gain = (bit[8] + 1) * (bit[7] + 1) * (bit[6:0] * 0.03125) */ +static u16 micron1_gain[] = { + /* 1x 1.25x 1.5x 1.75x */ + 0x0020, 0x0028, 0x0030, 0x0038, + /* 2x 2.25x 2.5x 2.75x */ + 0x00a0, 0x00a4, 0x00a8, 0x00ac, + /* 3x 3.25x 3.5x 3.75x */ + 0x00b0, 0x00b4, 0x00b8, 0x00bc, + /* 4x 4.25x 4.5x 4.75x */ + 0x00c0, 0x00c4, 0x00c8, 0x00cc, + /* 5x 5.25x 5.5x 5.75x */ + 0x00d0, 0x00d4, 0x00d8, 0x00dc, + /* 6x 6.25x 6.5x 6.75x */ + 0x00e0, 0x00e4, 0x00e8, 0x00ec, + /* 7x 7.25x 7.5x 7.75x */ + 0x00f0, 0x00f4, 0x00f8, 0x00fc, + /* 8x */ + 0x01c0 +}; + +/* mt9m001 sensor uses a different gain formula then other micron sensors */ +/* Gain = (bit[6] + 1) * (bit[5-0] * 0.125) */ +static u16 micron2_gain[] = { + /* 1x 1.25x 1.5x 1.75x */ + 0x0008, 0x000a, 0x000c, 0x000e, + /* 2x 2.25x 2.5x 2.75x */ + 0x0010, 0x0012, 0x0014, 0x0016, + /* 3x 3.25x 3.5x 3.75x */ + 0x0018, 0x001a, 0x001c, 0x001e, + /* 4x 4.25x 4.5x 4.75x */ + 0x0020, 0x0051, 0x0052, 0x0053, + /* 5x 5.25x 5.5x 5.75x */ + 0x0054, 0x0055, 0x0056, 0x0057, + /* 6x 6.25x 6.5x 6.75x */ + 0x0058, 0x0059, 0x005a, 0x005b, + /* 7x 7.25x 7.5x 7.75x */ + 0x005c, 0x005d, 0x005e, 0x005f, + /* 8x */ + 0x0060 +}; + +/* Gain = .5 + bit[7:0] / 16 */ +static u8 hv7131r_gain[] = { + 0x08 /* 1x */, 0x0c /* 1.25x */, 0x10 /* 1.5x */, 0x14 /* 1.75x */, + 0x18 /* 2x */, 0x1c /* 2.25x */, 0x20 /* 2.5x */, 0x24 /* 2.75x */, + 0x28 /* 3x */, 0x2c /* 3.25x */, 0x30 /* 3.5x */, 0x34 /* 3.75x */, + 0x38 /* 4x */, 0x3c /* 4.25x */, 0x40 /* 4.5x */, 0x44 /* 4.75x */, + 0x48 /* 5x */, 0x4c /* 5.25x */, 0x50 /* 5.5x */, 0x54 /* 5.75x */, + 0x58 /* 6x */, 0x5c /* 6.25x */, 0x60 /* 6.5x */, 0x64 /* 6.75x */, + 0x68 /* 7x */, 0x6c /* 7.25x */, 0x70 /* 7.5x */, 0x74 /* 7.75x */, + 0x78 /* 8x */ +}; + +static u8 soi968_init[][2] = { + {0x12, 0x80}, {0x0c, 0x00}, {0x0f, 0x1f}, + {0x11, 0x80}, {0x38, 0x52}, {0x1e, 0x00}, + {0x33, 0x08}, {0x35, 0x8c}, {0x36, 0x0c}, + {0x37, 0x04}, {0x45, 0x04}, {0x47, 0xff}, + {0x3e, 0x00}, {0x3f, 0x00}, {0x3b, 0x20}, + {0x3a, 0x96}, {0x3d, 0x0a}, {0x14, 0x8e}, + {0x13, 0x8a}, {0x12, 0x40}, {0x17, 0x13}, + {0x18, 0x63}, {0x19, 0x01}, {0x1a, 0x79}, + {0x32, 0x24}, {0x03, 0x00}, {0x11, 0x40}, + {0x2a, 0x10}, {0x2b, 0xe0}, {0x10, 0x32}, + {0x00, 0x00}, {0x01, 0x80}, {0x02, 0x80}, +}; + +static u8 ov7660_init[][2] = { + {0x0e, 0x80}, {0x0d, 0x08}, {0x0f, 0xc3}, + {0x04, 0xc3}, {0x10, 0x40}, {0x11, 0x40}, + {0x12, 0x05}, {0x13, 0xba}, {0x14, 0x2a}, + {0x37, 0x0f}, {0x38, 0x02}, {0x39, 0x43}, + {0x3a, 0x00}, {0x69, 0x90}, {0x2d, 0xf6}, + {0x2e, 0x0b}, {0x01, 0x78}, {0x02, 0x50}, +}; + +static u8 ov7670_init[][2] = { + {0x12, 0x80}, {0x11, 0x80}, {0x3a, 0x04}, {0x12, 0x01}, + {0x32, 0xb6}, {0x03, 0x0a}, {0x0c, 0x00}, {0x3e, 0x00}, + {0x70, 0x3a}, {0x71, 0x35}, {0x72, 0x11}, {0x73, 0xf0}, + {0xa2, 0x02}, {0x13, 0xe0}, {0x00, 0x00}, {0x10, 0x00}, + {0x0d, 0x40}, {0x14, 0x28}, {0xa5, 0x05}, {0xab, 0x07}, + {0x24, 0x95}, {0x25, 0x33}, {0x26, 0xe3}, {0x9f, 0x75}, + {0xa0, 0x65}, {0xa1, 0x0b}, {0xa6, 0xd8}, {0xa7, 0xd8}, + {0xa8, 0xf0}, {0xa9, 0x90}, {0xaa, 0x94}, {0x13, 0xe5}, + {0x0e, 0x61}, {0x0f, 0x4b}, {0x16, 0x02}, {0x1e, 0x27}, + {0x21, 0x02}, {0x22, 0x91}, {0x29, 0x07}, {0x33, 0x0b}, + {0x35, 0x0b}, {0x37, 0x1d}, {0x38, 0x71}, {0x39, 0x2a}, + {0x3c, 0x78}, {0x4d, 0x40}, {0x4e, 0x20}, {0x69, 0x00}, + {0x74, 0x19}, {0x8d, 0x4f}, {0x8e, 0x00}, {0x8f, 0x00}, + {0x90, 0x00}, {0x91, 0x00}, {0x96, 0x00}, {0x9a, 0x80}, + {0xb0, 0x84}, {0xb1, 0x0c}, {0xb2, 0x0e}, {0xb3, 0x82}, + {0xb8, 0x0a}, {0x43, 0x0a}, {0x44, 0xf0}, {0x45, 0x20}, + {0x46, 0x7d}, {0x47, 0x29}, {0x48, 0x4a}, {0x59, 0x8c}, + {0x5a, 0xa5}, {0x5b, 0xde}, {0x5c, 0x96}, {0x5d, 0x66}, + {0x5e, 0x10}, {0x6c, 0x0a}, {0x6d, 0x55}, {0x6e, 0x11}, + {0x6f, 0x9e}, {0x6a, 0x40}, {0x01, 0x40}, {0x02, 0x40}, + {0x13, 0xe7}, {0x4f, 0x6e}, {0x50, 0x70}, {0x51, 0x02}, + {0x52, 0x1d}, {0x53, 0x56}, {0x54, 0x73}, {0x55, 0x0a}, + {0x56, 0x55}, {0x57, 0x80}, {0x58, 0x9e}, {0x41, 0x08}, + {0x3f, 0x02}, {0x75, 0x03}, {0x76, 0x63}, {0x4c, 0x04}, + {0x77, 0x06}, {0x3d, 0x02}, {0x4b, 0x09}, {0xc9, 0x30}, + {0x41, 0x08}, {0x56, 0x48}, {0x34, 0x11}, {0xa4, 0x88}, + {0x96, 0x00}, {0x97, 0x30}, {0x98, 0x20}, {0x99, 0x30}, + {0x9a, 0x84}, {0x9b, 0x29}, {0x9c, 0x03}, {0x9d, 0x99}, + {0x9e, 0x7f}, {0x78, 0x04}, {0x79, 0x01}, {0xc8, 0xf0}, + {0x79, 0x0f}, {0xc8, 0x00}, {0x79, 0x10}, {0xc8, 0x7e}, + {0x79, 0x0a}, {0xc8, 0x80}, {0x79, 0x0b}, {0xc8, 0x01}, + {0x79, 0x0c}, {0xc8, 0x0f}, {0x79, 0x0d}, {0xc8, 0x20}, + {0x79, 0x09}, {0xc8, 0x80}, {0x79, 0x02}, {0xc8, 0xc0}, + {0x79, 0x03}, {0xc8, 0x40}, {0x79, 0x05}, {0xc8, 0x30}, + {0x79, 0x26}, {0x62, 0x20}, {0x63, 0x00}, {0x64, 0x06}, + {0x65, 0x00}, {0x66, 0x05}, {0x94, 0x05}, {0x95, 0x0a}, + {0x17, 0x13}, {0x18, 0x01}, {0x19, 0x02}, {0x1a, 0x7a}, + {0x46, 0x59}, {0x47, 0x30}, {0x58, 0x9a}, {0x59, 0x84}, + {0x5a, 0x91}, {0x5b, 0x57}, {0x5c, 0x75}, {0x5d, 0x6d}, + {0x5e, 0x13}, {0x64, 0x07}, {0x94, 0x07}, {0x95, 0x0d}, + {0xa6, 0xdf}, {0xa7, 0xdf}, {0x48, 0x4d}, {0x51, 0x00}, + {0x6b, 0x0a}, {0x11, 0x80}, {0x2a, 0x00}, {0x2b, 0x00}, + {0x92, 0x00}, {0x93, 0x00}, {0x55, 0x0a}, {0x56, 0x60}, + {0x4f, 0x6e}, {0x50, 0x70}, {0x51, 0x00}, {0x52, 0x1d}, + {0x53, 0x56}, {0x54, 0x73}, {0x58, 0x9a}, {0x4f, 0x6e}, + {0x50, 0x70}, {0x51, 0x00}, {0x52, 0x1d}, {0x53, 0x56}, + {0x54, 0x73}, {0x58, 0x9a}, {0x3f, 0x01}, {0x7b, 0x03}, + {0x7c, 0x09}, {0x7d, 0x16}, {0x7e, 0x38}, {0x7f, 0x47}, + {0x80, 0x53}, {0x81, 0x5e}, {0x82, 0x6a}, {0x83, 0x74}, + {0x84, 0x80}, {0x85, 0x8c}, {0x86, 0x9b}, {0x87, 0xb2}, + {0x88, 0xcc}, {0x89, 0xe5}, {0x7a, 0x24}, {0x3b, 0x00}, + {0x9f, 0x76}, {0xa0, 0x65}, {0x13, 0xe2}, {0x6b, 0x0a}, + {0x11, 0x80}, {0x2a, 0x00}, {0x2b, 0x00}, {0x92, 0x00}, + {0x93, 0x00}, +}; + +static u8 ov9650_init[][2] = { + {0x12, 0x80}, {0x00, 0x00}, {0x01, 0x78}, + {0x02, 0x78}, {0x03, 0x36}, {0x04, 0x03}, + {0x05, 0x00}, {0x06, 0x00}, {0x08, 0x00}, + {0x09, 0x01}, {0x0c, 0x00}, {0x0d, 0x00}, + {0x0e, 0xa0}, {0x0f, 0x52}, {0x10, 0x7c}, + {0x11, 0x80}, {0x12, 0x45}, {0x13, 0xc2}, + {0x14, 0x2e}, {0x15, 0x00}, {0x16, 0x07}, + {0x17, 0x24}, {0x18, 0xc5}, {0x19, 0x00}, + {0x1a, 0x3c}, {0x1b, 0x00}, {0x1e, 0x04}, + {0x1f, 0x00}, {0x24, 0x78}, {0x25, 0x68}, + {0x26, 0xd4}, {0x27, 0x80}, {0x28, 0x80}, + {0x29, 0x30}, {0x2a, 0x00}, {0x2b, 0x00}, + {0x2c, 0x80}, {0x2d, 0x00}, {0x2e, 0x00}, + {0x2f, 0x00}, {0x30, 0x08}, {0x31, 0x30}, + {0x32, 0x84}, {0x33, 0xe2}, {0x34, 0xbf}, + {0x35, 0x81}, {0x36, 0xf9}, {0x37, 0x00}, + {0x38, 0x93}, {0x39, 0x50}, {0x3a, 0x01}, + {0x3b, 0x01}, {0x3c, 0x73}, {0x3d, 0x19}, + {0x3e, 0x0b}, {0x3f, 0x80}, {0x40, 0xc1}, + {0x41, 0x00}, {0x42, 0x08}, {0x67, 0x80}, + {0x68, 0x80}, {0x69, 0x40}, {0x6a, 0x00}, + {0x6b, 0x0a}, {0x8b, 0x06}, {0x8c, 0x20}, + {0x8d, 0x00}, {0x8e, 0x00}, {0x8f, 0xdf}, + {0x92, 0x00}, {0x93, 0x00}, {0x94, 0x88}, + {0x95, 0x88}, {0x96, 0x04}, {0xa1, 0x00}, + {0xa5, 0x80}, {0xa8, 0x80}, {0xa9, 0xb8}, + {0xaa, 0x92}, {0xab, 0x0a}, +}; + +static u8 ov9655_init[][2] = { + {0x12, 0x80}, {0x12, 0x01}, {0x0d, 0x00}, {0x0e, 0x61}, + {0x11, 0x80}, {0x13, 0xba}, {0x14, 0x2e}, {0x16, 0x24}, + {0x1e, 0x04}, {0x1e, 0x04}, {0x1e, 0x04}, {0x27, 0x08}, + {0x28, 0x08}, {0x29, 0x15}, {0x2c, 0x08}, {0x32, 0xbf}, + {0x34, 0x3d}, {0x35, 0x00}, {0x36, 0xf8}, {0x38, 0x12}, + {0x39, 0x57}, {0x3a, 0x00}, {0x3b, 0xcc}, {0x3c, 0x0c}, + {0x3d, 0x19}, {0x3e, 0x0c}, {0x3f, 0x01}, {0x41, 0x40}, + {0x42, 0x80}, {0x45, 0x46}, {0x46, 0x62}, {0x47, 0x2a}, + {0x48, 0x3c}, {0x4a, 0xf0}, {0x4b, 0xdc}, {0x4c, 0xdc}, + {0x4d, 0xdc}, {0x4e, 0xdc}, {0x69, 0x02}, {0x6c, 0x04}, + {0x6f, 0x9e}, {0x70, 0x05}, {0x71, 0x78}, {0x77, 0x02}, + {0x8a, 0x23}, {0x8c, 0x0d}, {0x90, 0x7e}, {0x91, 0x7c}, + {0x9f, 0x6e}, {0xa0, 0x6e}, {0xa5, 0x68}, {0xa6, 0x60}, + {0xa8, 0xc1}, {0xa9, 0xfa}, {0xaa, 0x92}, {0xab, 0x04}, + {0xac, 0x80}, {0xad, 0x80}, {0xae, 0x80}, {0xaf, 0x80}, + {0xb2, 0xf2}, {0xb3, 0x20}, {0xb5, 0x00}, {0xb6, 0xaf}, + {0xbb, 0xae}, {0xbc, 0x44}, {0xbd, 0x44}, {0xbe, 0x3b}, + {0xbf, 0x3a}, {0xc0, 0xe2}, {0xc1, 0xc8}, {0xc2, 0x01}, + {0xc4, 0x00}, {0xc6, 0x85}, {0xc7, 0x81}, {0xc9, 0xe0}, + {0xca, 0xe8}, {0xcc, 0xd8}, {0xcd, 0x93}, {0x12, 0x61}, + {0x36, 0xfa}, {0x8c, 0x8d}, {0xc0, 0xaa}, {0x69, 0x0a}, + {0x03, 0x12}, {0x17, 0x14}, {0x18, 0x00}, {0x19, 0x01}, + {0x1a, 0x3d}, {0x32, 0xbf}, {0x11, 0x80}, {0x2a, 0x10}, + {0x2b, 0x0a}, {0x92, 0x00}, {0x93, 0x00}, {0x1e, 0x04}, + {0x1e, 0x04}, {0x10, 0x7c}, {0x04, 0x03}, {0xa1, 0x00}, + {0x2d, 0x00}, {0x2e, 0x00}, {0x00, 0x00}, {0x01, 0x80}, + {0x02, 0x80}, {0x12, 0x61}, {0x36, 0xfa}, {0x8c, 0x8d}, + {0xc0, 0xaa}, {0x69, 0x0a}, {0x03, 0x12}, {0x17, 0x14}, + {0x18, 0x00}, {0x19, 0x01}, {0x1a, 0x3d}, {0x32, 0xbf}, + {0x11, 0x80}, {0x2a, 0x10}, {0x2b, 0x0a}, {0x92, 0x00}, + {0x93, 0x00}, {0x04, 0x01}, {0x10, 0x1f}, {0xa1, 0x00}, + {0x00, 0x0a}, {0xa1, 0x00}, {0x10, 0x5d}, {0x04, 0x03}, + {0x00, 0x01}, {0xa1, 0x00}, {0x10, 0x7c}, {0x04, 0x03}, + {0x00, 0x03}, {0x00, 0x0a}, {0x00, 0x10}, {0x00, 0x13}, +}; + +static u16 mt9v112_init[][2] = { + {0xf0, 0x0000}, {0x0d, 0x0021}, {0x0d, 0x0020}, + {0x34, 0xc019}, {0x0a, 0x0011}, {0x0b, 0x000b}, + {0x20, 0x0703}, {0x35, 0x2022}, {0xf0, 0x0001}, + {0x05, 0x0000}, {0x06, 0x340c}, {0x3b, 0x042a}, + {0x3c, 0x0400}, {0xf0, 0x0002}, {0x2e, 0x0c58}, + {0x5b, 0x0001}, {0xc8, 0x9f0b}, {0xf0, 0x0001}, + {0x9b, 0x5300}, {0xf0, 0x0000}, {0x2b, 0x0020}, + {0x2c, 0x002a}, {0x2d, 0x0032}, {0x2e, 0x0020}, + {0x09, 0x01dc}, {0x01, 0x000c}, {0x02, 0x0020}, + {0x03, 0x01e0}, {0x04, 0x0280}, {0x06, 0x000c}, + {0x05, 0x0098}, {0x20, 0x0703}, {0x09, 0x01f2}, + {0x2b, 0x00a0}, {0x2c, 0x00a0}, {0x2d, 0x00a0}, + {0x2e, 0x00a0}, {0x01, 0x000c}, {0x02, 0x0020}, + {0x03, 0x01e0}, {0x04, 0x0280}, {0x06, 0x000c}, + {0x05, 0x0098}, {0x09, 0x01c1}, {0x2b, 0x00ae}, + {0x2c, 0x00ae}, {0x2d, 0x00ae}, {0x2e, 0x00ae}, +}; + +static u16 mt9v111_init[][2] = { + {0x01, 0x0004}, {0x0d, 0x0001}, {0x0d, 0x0000}, + {0x01, 0x0001}, {0x02, 0x0016}, {0x03, 0x01e1}, + {0x04, 0x0281}, {0x05, 0x0004}, {0x07, 0x3002}, + {0x21, 0x0000}, {0x25, 0x4024}, {0x26, 0xff03}, + {0x27, 0xff10}, {0x2b, 0x7828}, {0x2c, 0xb43c}, + {0x2d, 0xf0a0}, {0x2e, 0x0c64}, {0x2f, 0x0064}, + {0x67, 0x4010}, {0x06, 0x301e}, {0x08, 0x0480}, + {0x01, 0x0004}, {0x02, 0x0016}, {0x03, 0x01e6}, + {0x04, 0x0286}, {0x05, 0x0004}, {0x06, 0x0000}, + {0x07, 0x3002}, {0x08, 0x0008}, {0x0c, 0x0000}, + {0x0d, 0x0000}, {0x0e, 0x0000}, {0x0f, 0x0000}, + {0x10, 0x0000}, {0x11, 0x0000}, {0x12, 0x00b0}, + {0x13, 0x007c}, {0x14, 0x0000}, {0x15, 0x0000}, + {0x16, 0x0000}, {0x17, 0x0000}, {0x18, 0x0000}, + {0x19, 0x0000}, {0x1a, 0x0000}, {0x1b, 0x0000}, + {0x1c, 0x0000}, {0x1d, 0x0000}, {0x30, 0x0000}, + {0x30, 0x0005}, {0x31, 0x0000}, {0x02, 0x0016}, + {0x03, 0x01e1}, {0x04, 0x0281}, {0x05, 0x0004}, + {0x06, 0x0000}, {0x07, 0x3002}, {0x06, 0x002d}, + {0x05, 0x0004}, {0x09, 0x0064}, {0x2b, 0x00a0}, + {0x2c, 0x00a0}, {0x2d, 0x00a0}, {0x2e, 0x00a0}, + {0x02, 0x0016}, {0x03, 0x01e1}, {0x04, 0x0281}, + {0x05, 0x0004}, {0x06, 0x002d}, {0x07, 0x3002}, + {0x0e, 0x0008}, {0x06, 0x002d}, {0x05, 0x0004}, +}; + +static u16 mt9v011_init[][2] = { + {0x07, 0x0002}, {0x0d, 0x0001}, {0x0d, 0x0000}, + {0x01, 0x0008}, {0x02, 0x0016}, {0x03, 0x01e1}, + {0x04, 0x0281}, {0x05, 0x0083}, {0x06, 0x0006}, + {0x0d, 0x0002}, {0x0a, 0x0000}, {0x0b, 0x0000}, + {0x0c, 0x0000}, {0x0d, 0x0000}, {0x0e, 0x0000}, + {0x0f, 0x0000}, {0x10, 0x0000}, {0x11, 0x0000}, + {0x12, 0x0000}, {0x13, 0x0000}, {0x14, 0x0000}, + {0x15, 0x0000}, {0x16, 0x0000}, {0x17, 0x0000}, + {0x18, 0x0000}, {0x19, 0x0000}, {0x1a, 0x0000}, + {0x1b, 0x0000}, {0x1c, 0x0000}, {0x1d, 0x0000}, + {0x32, 0x0000}, {0x20, 0x1101}, {0x21, 0x0000}, + {0x22, 0x0000}, {0x23, 0x0000}, {0x24, 0x0000}, + {0x25, 0x0000}, {0x26, 0x0000}, {0x27, 0x0024}, + {0x2f, 0xf7b0}, {0x30, 0x0005}, {0x31, 0x0000}, + {0x32, 0x0000}, {0x33, 0x0000}, {0x34, 0x0100}, + {0x3d, 0x068f}, {0x40, 0x01e0}, {0x41, 0x00d1}, + {0x44, 0x0082}, {0x5a, 0x0000}, {0x5b, 0x0000}, + {0x5c, 0x0000}, {0x5d, 0x0000}, {0x5e, 0x0000}, + {0x5f, 0xa31d}, {0x62, 0x0611}, {0x0a, 0x0000}, + {0x06, 0x0029}, {0x05, 0x0009}, {0x20, 0x1101}, + {0x20, 0x1101}, {0x09, 0x0064}, {0x07, 0x0003}, + {0x2b, 0x0033}, {0x2c, 0x00a0}, {0x2d, 0x00a0}, + {0x2e, 0x0033}, {0x07, 0x0002}, {0x06, 0x0000}, + {0x06, 0x0029}, {0x05, 0x0009}, +}; + +static u16 mt9m001_init[][2] = { + {0x0d, 0x0001}, {0x0d, 0x0000}, {0x01, 0x000e}, + {0x02, 0x0014}, {0x03, 0x03c1}, {0x04, 0x0501}, + {0x05, 0x0083}, {0x06, 0x0006}, {0x0d, 0x0002}, + {0x0a, 0x0000}, {0x0c, 0x0000}, {0x11, 0x0000}, + {0x1e, 0x8000}, {0x5f, 0x8904}, {0x60, 0x0000}, + {0x61, 0x0000}, {0x62, 0x0498}, {0x63, 0x0000}, + {0x64, 0x0000}, {0x20, 0x111d}, {0x06, 0x00f2}, + {0x05, 0x0013}, {0x09, 0x10f2}, {0x07, 0x0003}, + {0x2b, 0x002a}, {0x2d, 0x002a}, {0x2c, 0x002a}, + {0x2e, 0x0029}, {0x07, 0x0002}, +}; + +static u16 mt9m111_init[][2] = { + {0xf0, 0x0000}, {0x0d, 0x0008}, {0x0d, 0x0009}, + {0x0d, 0x0008}, {0xf0, 0x0001}, {0x3a, 0x4300}, + {0x9b, 0x4300}, {0xa1, 0x0280}, {0xa4, 0x0200}, + {0x06, 0x308e}, {0xf0, 0x0000}, +}; + +static u8 hv7131r_init[][2] = { + {0x02, 0x08}, {0x02, 0x00}, {0x01, 0x08}, + {0x02, 0x00}, {0x20, 0x00}, {0x21, 0xd0}, + {0x22, 0x00}, {0x23, 0x09}, {0x01, 0x08}, + {0x01, 0x08}, {0x01, 0x08}, {0x25, 0x07}, + {0x26, 0xc3}, {0x27, 0x50}, {0x30, 0x62}, + {0x31, 0x10}, {0x32, 0x06}, {0x33, 0x10}, + {0x20, 0x00}, {0x21, 0xd0}, {0x22, 0x00}, + {0x23, 0x09}, {0x01, 0x08}, +}; + +int reg_r(struct gspca_dev *gspca_dev, u16 reg, u16 length) +{ + struct usb_device *dev = gspca_dev->dev; + int result; + result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + 0x00, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, + reg, + 0x00, + gspca_dev->usb_buf, + length, + 500); + if (unlikely(result < 0 || result != length)) { + err("Read register failed 0x%02X", reg); + return -EIO; + } + return 0; +} + +int reg_w(struct gspca_dev *gspca_dev, u16 reg, const u8 *buffer, int length) +{ + struct usb_device *dev = gspca_dev->dev; + int result; + memcpy(gspca_dev->usb_buf, buffer, length); + result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + 0x08, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, + reg, + 0x00, + gspca_dev->usb_buf, + length, + 500); + if (unlikely(result < 0 || result != length)) { + err("Write register failed index 0x%02X", reg); + return -EIO; + } + return 0; +} + +int reg_w1(struct gspca_dev *gspca_dev, u16 reg, const u8 value) +{ + u8 data[1] = {value}; + return reg_w(gspca_dev, reg, data, 1); +} + +int i2c_w(struct gspca_dev *gspca_dev, const u8 *buffer) +{ + int i; + reg_w(gspca_dev, 0x10c0, buffer, 8); + for (i = 0; i < 5; i++) { + reg_r(gspca_dev, 0x10c0, 1); + if (gspca_dev->usb_buf[0] & 0x04) { + if (gspca_dev->usb_buf[0] & 0x08) + return -1; + return 0; + } + msleep(1); + } + return -1; +} + +int i2c_w1(struct gspca_dev *gspca_dev, u8 reg, u8 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + u8 row[8]; + + /* + * from the point of view of the bridge, the length + * includes the address + */ + row[0] = 0x81 | (2 << 4); + row[1] = sd->i2c_addr; + row[2] = reg; + row[3] = val; + row[4] = 0x00; + row[5] = 0x00; + row[6] = 0x00; + row[7] = 0x10; + + return i2c_w(gspca_dev, row); +} + +int i2c_w2(struct gspca_dev *gspca_dev, u8 reg, u16 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 row[8]; + + /* + * from the point of view of the bridge, the length + * includes the address + */ + row[0] = 0x81 | (3 << 4); + row[1] = sd->i2c_addr; + row[2] = reg; + row[3] = (val >> 8) & 0xff; + row[4] = val & 0xff; + row[5] = 0x00; + row[6] = 0x00; + row[7] = 0x10; + + return i2c_w(gspca_dev, row); +} + +int i2c_r1(struct gspca_dev *gspca_dev, u8 reg, u8 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 row[8]; + + row[0] = 0x81 | 0x10; + row[1] = sd->i2c_addr; + row[2] = reg; + row[3] = 0; + row[4] = 0; + row[5] = 0; + row[6] = 0; + row[7] = 0x10; + reg_w(gspca_dev, 0x10c0, row, 8); + msleep(1); + row[0] = 0x81 | (2 << 4) | 0x02; + row[2] = 0; + reg_w(gspca_dev, 0x10c0, row, 8); + msleep(1); + reg_r(gspca_dev, 0x10c2, 5); + *val = gspca_dev->usb_buf[3]; + return 0; +} + +int i2c_r2(struct gspca_dev *gspca_dev, u8 reg, u16 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 row[8]; + + row[0] = 0x81 | 0x10; + row[1] = sd->i2c_addr; + row[2] = reg; + row[3] = 0; + row[4] = 0; + row[5] = 0; + row[6] = 0; + row[7] = 0x10; + reg_w(gspca_dev, 0x10c0, row, 8); + msleep(1); + row[0] = 0x81 | (3 << 4) | 0x02; + row[2] = 0; + reg_w(gspca_dev, 0x10c0, row, 8); + msleep(1); + reg_r(gspca_dev, 0x10c2, 5); + *val = (gspca_dev->usb_buf[2] << 8) | gspca_dev->usb_buf[3]; + return 0; +} + +static int ov9650_init_sensor(struct gspca_dev *gspca_dev) +{ + int i; + struct sd *sd = (struct sd *) gspca_dev; + + for (i = 0; i < ARRAY_SIZE(ov9650_init); i++) { + if (i2c_w1(gspca_dev, ov9650_init[i][0], + ov9650_init[i][1]) < 0) { + err("OV9650 sensor initialization failed"); + return -ENODEV; + } + } + sd->hstart = 1; + sd->vstart = 7; + return 0; +} + +static int ov9655_init_sensor(struct gspca_dev *gspca_dev) +{ + int i; + struct sd *sd = (struct sd *) gspca_dev; + + for (i = 0; i < ARRAY_SIZE(ov9655_init); i++) { + if (i2c_w1(gspca_dev, ov9655_init[i][0], + ov9655_init[i][1]) < 0) { + err("OV9655 sensor initialization failed"); + return -ENODEV; + } + } + /* disable hflip and vflip */ + gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX); + sd->hstart = 0; + sd->vstart = 7; + return 0; +} + +static int soi968_init_sensor(struct gspca_dev *gspca_dev) +{ + int i; + struct sd *sd = (struct sd *) gspca_dev; + + for (i = 0; i < ARRAY_SIZE(soi968_init); i++) { + if (i2c_w1(gspca_dev, soi968_init[i][0], + soi968_init[i][1]) < 0) { + err("SOI968 sensor initialization failed"); + return -ENODEV; + } + } + /* disable hflip and vflip */ + gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX); + sd->hstart = 60; + sd->vstart = 11; + return 0; +} + +static int ov7660_init_sensor(struct gspca_dev *gspca_dev) +{ + int i; + struct sd *sd = (struct sd *) gspca_dev; + + for (i = 0; i < ARRAY_SIZE(ov7660_init); i++) { + if (i2c_w1(gspca_dev, ov7660_init[i][0], + ov7660_init[i][1]) < 0) { + err("OV7660 sensor initialization failed"); + return -ENODEV; + } + } + /* disable hflip and vflip */ + gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX); + sd->hstart = 1; + sd->vstart = 1; + return 0; +} + +static int ov7670_init_sensor(struct gspca_dev *gspca_dev) +{ + int i; + struct sd *sd = (struct sd *) gspca_dev; + + for (i = 0; i < ARRAY_SIZE(ov7670_init); i++) { + if (i2c_w1(gspca_dev, ov7670_init[i][0], + ov7670_init[i][1]) < 0) { + err("OV7670 sensor initialization failed"); + return -ENODEV; + } + } + /* disable hflip and vflip */ + gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX); + sd->hstart = 0; + sd->vstart = 1; + return 0; +} + +static int mt9v_init_sensor(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i; + u16 value; + int ret; + + sd->i2c_addr = 0x5d; + ret = i2c_r2(gspca_dev, 0xff, &value); + if ((ret == 0) && (value == 0x8243)) { + for (i = 0; i < ARRAY_SIZE(mt9v011_init); i++) { + if (i2c_w2(gspca_dev, mt9v011_init[i][0], + mt9v011_init[i][1]) < 0) { + err("MT9V011 sensor initialization failed"); + return -ENODEV; + } + } + sd->hstart = 2; + sd->vstart = 2; + sd->sensor = SENSOR_MT9V011; + info("MT9V011 sensor detected"); + return 0; + } + + sd->i2c_addr = 0x5c; + i2c_w2(gspca_dev, 0x01, 0x0004); + ret = i2c_r2(gspca_dev, 0xff, &value); + if ((ret == 0) && (value == 0x823a)) { + for (i = 0; i < ARRAY_SIZE(mt9v111_init); i++) { + if (i2c_w2(gspca_dev, mt9v111_init[i][0], + mt9v111_init[i][1]) < 0) { + err("MT9V111 sensor initialization failed"); + return -ENODEV; + } + } + sd->hstart = 2; + sd->vstart = 2; + sd->sensor = SENSOR_MT9V111; + info("MT9V111 sensor detected"); + return 0; + } + + sd->i2c_addr = 0x5d; + ret = i2c_w2(gspca_dev, 0xf0, 0x0000); + if (ret < 0) { + sd->i2c_addr = 0x48; + i2c_w2(gspca_dev, 0xf0, 0x0000); + } + ret = i2c_r2(gspca_dev, 0x00, &value); + if ((ret == 0) && (value == 0x1229)) { + for (i = 0; i < ARRAY_SIZE(mt9v112_init); i++) { + if (i2c_w2(gspca_dev, mt9v112_init[i][0], + mt9v112_init[i][1]) < 0) { + err("MT9V112 sensor initialization failed"); + return -ENODEV; + } + } + sd->hstart = 6; + sd->vstart = 2; + sd->sensor = SENSOR_MT9V112; + info("MT9V112 sensor detected"); + return 0; + } + + return -ENODEV; +} + +static int mt9m111_init_sensor(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i; + for (i = 0; i < ARRAY_SIZE(mt9m111_init); i++) { + if (i2c_w2(gspca_dev, mt9m111_init[i][0], + mt9m111_init[i][1]) < 0) { + err("MT9M111 sensor initialization failed"); + return -ENODEV; + } + } + sd->hstart = 0; + sd->vstart = 2; + return 0; +} + +static int mt9m001_init_sensor(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i; + for (i = 0; i < ARRAY_SIZE(mt9m001_init); i++) { + if (i2c_w2(gspca_dev, mt9m001_init[i][0], + mt9m001_init[i][1]) < 0) { + err("MT9M001 sensor initialization failed"); + return -ENODEV; + } + } + /* disable hflip and vflip */ + gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX); + sd->hstart = 2; + sd->vstart = 2; + return 0; +} + +static int hv7131r_init_sensor(struct gspca_dev *gspca_dev) +{ + int i; + struct sd *sd = (struct sd *) gspca_dev; + + for (i = 0; i < ARRAY_SIZE(hv7131r_init); i++) { + if (i2c_w1(gspca_dev, hv7131r_init[i][0], + hv7131r_init[i][1]) < 0) { + err("HV7131R Sensor initialization failed"); + return -ENODEV; + } + } + sd->hstart = 0; + sd->vstart = 1; + return 0; +} + +#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV +static int input_kthread(void *data) +{ + struct gspca_dev *gspca_dev = (struct gspca_dev *)data; + struct sd *sd = (struct sd *) gspca_dev; + + DECLARE_WAIT_QUEUE_HEAD(wait); + set_freezable(); + for (;;) { + if (kthread_should_stop()) + break; + + if (reg_r(gspca_dev, 0x1005, 1) < 0) + continue; + + input_report_key(sd->input_dev, + KEY_CAMERA, + gspca_dev->usb_buf[0] & sd->input_gpio); + input_sync(sd->input_dev); + + wait_event_freezable_timeout(wait, + kthread_should_stop(), + msecs_to_jiffies(100)); + } + return 0; +} + + +static int sn9c20x_input_init(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + if (sd->input_gpio == 0) + return 0; + + sd->input_dev = input_allocate_device(); + if (!sd->input_dev) + return -ENOMEM; + + sd->input_dev->name = "SN9C20X Webcam"; + + sd->input_dev->phys = kasprintf(GFP_KERNEL, "usb-%s-%s", + gspca_dev->dev->bus->bus_name, + gspca_dev->dev->devpath); + + if (!sd->input_dev->phys) + return -ENOMEM; + + usb_to_input_id(gspca_dev->dev, &sd->input_dev->id); + sd->input_dev->dev.parent = &gspca_dev->dev->dev; + + set_bit(EV_KEY, sd->input_dev->evbit); + set_bit(KEY_CAMERA, sd->input_dev->keybit); + + if (input_register_device(sd->input_dev)) + return -EINVAL; + + sd->input_task = kthread_run(input_kthread, gspca_dev, "sn9c20x/%d", + gspca_dev->vdev.minor); + + if (IS_ERR(sd->input_task)) + return -EINVAL; + + return 0; +} + +static void sn9c20x_input_cleanup(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + if (sd->input_task != NULL && !IS_ERR(sd->input_task)) + kthread_stop(sd->input_task); + + if (sd->input_dev != NULL) { + input_unregister_device(sd->input_dev); + kfree(sd->input_dev->phys); + input_free_device(sd->input_dev); + sd->input_dev = NULL; + } +} +#endif + +static int set_cmatrix(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 hue_coord, hue_index = 180 + sd->hue; + u8 cmatrix[21]; + memset(cmatrix, 0, 21); + + cmatrix[2] = (sd->contrast * 0x25 / 0x100) + 0x26; + cmatrix[0] = 0x13 + (cmatrix[2] - 0x26) * 0x13 / 0x25; + cmatrix[4] = 0x07 + (cmatrix[2] - 0x26) * 0x07 / 0x25; + cmatrix[18] = sd->brightness - 0x80; + + hue_coord = (hsv_red_x[hue_index] * sd->saturation) >> 8; + cmatrix[6] = (unsigned char)(hue_coord & 0xff); + cmatrix[7] = (unsigned char)((hue_coord >> 8) & 0x0f); + + hue_coord = (hsv_red_y[hue_index] * sd->saturation) >> 8; + cmatrix[8] = (unsigned char)(hue_coord & 0xff); + cmatrix[9] = (unsigned char)((hue_coord >> 8) & 0x0f); + + hue_coord = (hsv_green_x[hue_index] * sd->saturation) >> 8; + cmatrix[10] = (unsigned char)(hue_coord & 0xff); + cmatrix[11] = (unsigned char)((hue_coord >> 8) & 0x0f); + + hue_coord = (hsv_green_y[hue_index] * sd->saturation) >> 8; + cmatrix[12] = (unsigned char)(hue_coord & 0xff); + cmatrix[13] = (unsigned char)((hue_coord >> 8) & 0x0f); + + hue_coord = (hsv_blue_x[hue_index] * sd->saturation) >> 8; + cmatrix[14] = (unsigned char)(hue_coord & 0xff); + cmatrix[15] = (unsigned char)((hue_coord >> 8) & 0x0f); + + hue_coord = (hsv_blue_y[hue_index] * sd->saturation) >> 8; + cmatrix[16] = (unsigned char)(hue_coord & 0xff); + cmatrix[17] = (unsigned char)((hue_coord >> 8) & 0x0f); + + return reg_w(gspca_dev, 0x10e1, cmatrix, 21); +} + +static int set_gamma(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 gamma[17]; + u8 gval = sd->gamma * 0xb8 / 0x100; + + + gamma[0] = 0x0a; + gamma[1] = 0x13 + (gval * (0xcb - 0x13) / 0xb8); + gamma[2] = 0x25 + (gval * (0xee - 0x25) / 0xb8); + gamma[3] = 0x37 + (gval * (0xfa - 0x37) / 0xb8); + gamma[4] = 0x45 + (gval * (0xfc - 0x45) / 0xb8); + gamma[5] = 0x55 + (gval * (0xfb - 0x55) / 0xb8); + gamma[6] = 0x65 + (gval * (0xfc - 0x65) / 0xb8); + gamma[7] = 0x74 + (gval * (0xfd - 0x74) / 0xb8); + gamma[8] = 0x83 + (gval * (0xfe - 0x83) / 0xb8); + gamma[9] = 0x92 + (gval * (0xfc - 0x92) / 0xb8); + gamma[10] = 0xa1 + (gval * (0xfc - 0xa1) / 0xb8); + gamma[11] = 0xb0 + (gval * (0xfc - 0xb0) / 0xb8); + gamma[12] = 0xbf + (gval * (0xfb - 0xbf) / 0xb8); + gamma[13] = 0xce + (gval * (0xfb - 0xce) / 0xb8); + gamma[14] = 0xdf + (gval * (0xfd - 0xdf) / 0xb8); + gamma[15] = 0xea + (gval * (0xf9 - 0xea) / 0xb8); + gamma[16] = 0xf5; + + return reg_w(gspca_dev, 0x1190, gamma, 17); +} + +static int set_redblue(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + reg_w1(gspca_dev, 0x118c, sd->red); + reg_w1(gspca_dev, 0x118f, sd->blue); + return 0; +} + +static int set_hvflip(struct gspca_dev *gspca_dev) +{ + u8 value, tslb; + u16 value2; + struct sd *sd = (struct sd *) gspca_dev; + switch (sd->sensor) { + case SENSOR_OV9650: + i2c_r1(gspca_dev, 0x1e, &value); + value &= ~0x30; + tslb = 0x01; + if (sd->hflip) + value |= 0x20; + if (sd->vflip) { + value |= 0x10; + tslb = 0x49; + } + i2c_w1(gspca_dev, 0x1e, value); + i2c_w1(gspca_dev, 0x3a, tslb); + break; + case SENSOR_MT9V111: + case SENSOR_MT9V011: + i2c_r2(gspca_dev, 0x20, &value2); + value2 &= ~0xc0a0; + if (sd->hflip) + value2 |= 0x8080; + if (sd->vflip) + value2 |= 0x4020; + i2c_w2(gspca_dev, 0x20, value2); + break; + case SENSOR_MT9M111: + case SENSOR_MT9V112: + i2c_r2(gspca_dev, 0x20, &value2); + value2 &= ~0x0003; + if (sd->hflip) + value2 |= 0x0002; + if (sd->vflip) + value2 |= 0x0001; + i2c_w2(gspca_dev, 0x20, value2); + break; + case SENSOR_HV7131R: + i2c_r1(gspca_dev, 0x01, &value); + value &= ~0x03; + if (sd->vflip) + value |= 0x01; + if (sd->hflip) + value |= 0x02; + i2c_w1(gspca_dev, 0x01, value); + break; + } + return 0; +} + +static int set_exposure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 exp[8] = {0x81, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e}; + switch (sd->sensor) { + case SENSOR_OV7660: + case SENSOR_OV7670: + case SENSOR_SOI968: + case SENSOR_OV9655: + case SENSOR_OV9650: + exp[0] |= (3 << 4); + exp[2] = 0x2d; + exp[3] = sd->exposure & 0xff; + exp[4] = sd->exposure >> 8; + break; + case SENSOR_MT9M001: + case SENSOR_MT9M111: + case SENSOR_MT9V112: + case SENSOR_MT9V111: + case SENSOR_MT9V011: + exp[0] |= (3 << 4); + exp[2] = 0x09; + exp[3] = sd->exposure >> 8; + exp[4] = sd->exposure & 0xff; + break; + case SENSOR_HV7131R: + exp[0] |= (4 << 4); + exp[2] = 0x25; + exp[3] = ((sd->exposure * 0xffffff) / 0xffff) >> 16; + exp[4] = ((sd->exposure * 0xffffff) / 0xffff) >> 8; + exp[5] = ((sd->exposure * 0xffffff) / 0xffff) & 0xff; + break; + } + i2c_w(gspca_dev, exp); + return 0; +} + +static int set_gain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 gain[8] = {0x81, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1d}; + switch (sd->sensor) { + case SENSOR_OV7660: + case SENSOR_OV7670: + case SENSOR_SOI968: + case SENSOR_OV9655: + case SENSOR_OV9650: + gain[0] |= (2 << 4); + gain[3] = ov_gain[sd->gain]; + break; + case SENSOR_MT9V011: + case SENSOR_MT9V111: + gain[0] |= (3 << 4); + gain[2] = 0x35; + gain[3] = micron1_gain[sd->gain] >> 8; + gain[4] = micron1_gain[sd->gain] & 0xff; + break; + case SENSOR_MT9V112: + case SENSOR_MT9M111: + gain[0] |= (3 << 4); + gain[2] = 0x2f; + gain[3] = micron1_gain[sd->gain] >> 8; + gain[4] = micron1_gain[sd->gain] & 0xff; + break; + case SENSOR_MT9M001: + gain[0] |= (3 << 4); + gain[2] = 0x2f; + gain[3] = micron2_gain[sd->gain] >> 8; + gain[4] = micron2_gain[sd->gain] & 0xff; + break; + case SENSOR_HV7131R: + gain[0] |= (2 << 4); + gain[2] = 0x30; + gain[3] = hv7131r_gain[sd->gain]; + break; + } + i2c_w(gspca_dev, gain); + return 0; +} + +static int sd_setbrightness(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->brightness = val; + if (gspca_dev->streaming) + return set_cmatrix(gspca_dev); + return 0; +} + +static int sd_getbrightness(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->brightness; + return 0; +} + + +static int sd_setcontrast(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->contrast = val; + if (gspca_dev->streaming) + return set_cmatrix(gspca_dev); + return 0; +} + +static int sd_getcontrast(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->contrast; + return 0; +} + +static int sd_setsaturation(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->saturation = val; + if (gspca_dev->streaming) + return set_cmatrix(gspca_dev); + return 0; +} + +static int sd_getsaturation(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->saturation; + return 0; +} + +static int sd_sethue(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->hue = val; + if (gspca_dev->streaming) + return set_cmatrix(gspca_dev); + return 0; +} + +static int sd_gethue(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->hue; + return 0; +} + +static int sd_setgamma(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->gamma = val; + if (gspca_dev->streaming) + return set_gamma(gspca_dev); + return 0; +} + +static int sd_getgamma(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->gamma; + return 0; +} + +static int sd_setredbalance(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->red = val; + if (gspca_dev->streaming) + return set_redblue(gspca_dev); + return 0; +} + +static int sd_getredbalance(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->red; + return 0; +} + +static int sd_setbluebalance(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->blue = val; + if (gspca_dev->streaming) + return set_redblue(gspca_dev); + return 0; +} + +static int sd_getbluebalance(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->blue; + return 0; +} + +static int sd_sethflip(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->hflip = val; + if (gspca_dev->streaming) + return set_hvflip(gspca_dev); + return 0; +} + +static int sd_gethflip(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->hflip; + return 0; +} + +static int sd_setvflip(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->vflip = val; + if (gspca_dev->streaming) + return set_hvflip(gspca_dev); + return 0; +} + +static int sd_getvflip(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->vflip; + return 0; +} + +static int sd_setexposure(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->exposure = val; + if (gspca_dev->streaming) + return set_exposure(gspca_dev); + return 0; +} + +static int sd_getexposure(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->exposure; + return 0; +} + +static int sd_setgain(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->gain = val; + if (gspca_dev->streaming) + return set_gain(gspca_dev); + return 0; +} + +static int sd_getgain(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->gain; + return 0; +} + +static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + sd->auto_exposure = val; + return 0; +} + +static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + *val = sd->auto_exposure; + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int sd_dbg_g_register(struct gspca_dev *gspca_dev, + struct v4l2_dbg_register *reg) +{ + struct sd *sd = (struct sd *) gspca_dev; + switch (reg->match.type) { + case V4L2_CHIP_MATCH_HOST: + if (reg->match.addr != 0) + return -EINVAL; + if (reg->reg < 0x1000 || reg->reg > 0x11ff) + return -EINVAL; + if (reg_r(gspca_dev, reg->reg, 1) < 0) + return -EINVAL; + reg->val = gspca_dev->usb_buf[0]; + return 0; + case V4L2_CHIP_MATCH_I2C_ADDR: + if (reg->match.addr != sd->i2c_addr) + return -EINVAL; + if (sd->sensor >= SENSOR_MT9V011 && + sd->sensor <= SENSOR_MT9M111) { + if (i2c_r2(gspca_dev, reg->reg, (u16 *)®->val) < 0) + return -EINVAL; + } else { + if (i2c_r1(gspca_dev, reg->reg, (u8 *)®->val) < 0) + return -EINVAL; + } + return 0; + } + return -EINVAL; +} + +static int sd_dbg_s_register(struct gspca_dev *gspca_dev, + struct v4l2_dbg_register *reg) +{ + struct sd *sd = (struct sd *) gspca_dev; + switch (reg->match.type) { + case V4L2_CHIP_MATCH_HOST: + if (reg->match.addr != 0) + return -EINVAL; + if (reg->reg < 0x1000 || reg->reg > 0x11ff) + return -EINVAL; + if (reg_w1(gspca_dev, reg->reg, reg->val) < 0) + return -EINVAL; + return 0; + case V4L2_CHIP_MATCH_I2C_ADDR: + if (reg->match.addr != sd->i2c_addr) + return -EINVAL; + if (sd->sensor >= SENSOR_MT9V011 && + sd->sensor <= SENSOR_MT9M111) { + if (i2c_w2(gspca_dev, reg->reg, reg->val) < 0) + return -EINVAL; + } else { + if (i2c_w1(gspca_dev, reg->reg, reg->val) < 0) + return -EINVAL; + } + return 0; + } + return -EINVAL; +} +#endif + +static int sd_chip_ident(struct gspca_dev *gspca_dev, + struct v4l2_dbg_chip_ident *chip) +{ + struct sd *sd = (struct sd *) gspca_dev; + + switch (chip->match.type) { + case V4L2_CHIP_MATCH_HOST: + if (chip->match.addr != 0) + return -EINVAL; + chip->revision = 0; + chip->ident = V4L2_IDENT_SN9C20X; + return 0; + case V4L2_CHIP_MATCH_I2C_ADDR: + if (chip->match.addr != sd->i2c_addr) + return -EINVAL; + chip->revision = 0; + chip->ident = i2c_ident[sd->sensor]; + return 0; + } + return -EINVAL; +} + +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct sd *sd = (struct sd *) gspca_dev; + struct cam *cam; + + cam = &gspca_dev->cam; + + sd->sensor = (id->driver_info >> 8) & 0xff; + sd->i2c_addr = id->driver_info & 0xff; + + switch (sd->sensor) { + case SENSOR_OV9650: + cam->cam_mode = sxga_mode; + cam->nmodes = ARRAY_SIZE(sxga_mode); + break; + default: + cam->cam_mode = vga_mode; + cam->nmodes = ARRAY_SIZE(vga_mode); + } + + sd->old_step = 0; + sd->older_step = 0; + sd->exposure_step = 16; + + sd->brightness = BRIGHTNESS_DEFAULT; + sd->contrast = CONTRAST_DEFAULT; + sd->saturation = SATURATION_DEFAULT; + sd->hue = HUE_DEFAULT; + sd->gamma = GAMMA_DEFAULT; + sd->red = RED_DEFAULT; + sd->blue = BLUE_DEFAULT; + + sd->hflip = HFLIP_DEFAULT; + sd->vflip = VFLIP_DEFAULT; + sd->exposure = EXPOSURE_DEFAULT; + sd->gain = GAIN_DEFAULT; + sd->auto_exposure = AUTO_EXPOSURE_DEFAULT; + + sd->quality = 95; + +#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV + sd->input_gpio = (id->driver_info >> 16) & 0xff; + if (sn9c20x_input_init(gspca_dev) < 0) + return -ENODEV; +#endif + return 0; +} + +static int sd_init(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i; + u8 value; + u8 i2c_init[9] = + {0x80, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03}; + + for (i = 0; i < ARRAY_SIZE(bridge_init); i++) { + value = bridge_init[i][1]; + if (reg_w(gspca_dev, bridge_init[i][0], &value, 1) < 0) { + err("Device initialization failed"); + return -ENODEV; + } + } + + if (reg_w(gspca_dev, 0x10c0, i2c_init, 9) < 0) { + err("Device initialization failed"); + return -ENODEV; + } + + switch (sd->sensor) { + case SENSOR_OV9650: + if (ov9650_init_sensor(gspca_dev) < 0) + return -ENODEV; + info("OV9650 sensor detected"); + break; + case SENSOR_OV9655: + if (ov9655_init_sensor(gspca_dev) < 0) + return -ENODEV; + info("OV9655 sensor detected"); + break; + case SENSOR_SOI968: + if (soi968_init_sensor(gspca_dev) < 0) + return -ENODEV; + info("SOI968 sensor detected"); + break; + case SENSOR_OV7660: + if (ov7660_init_sensor(gspca_dev) < 0) + return -ENODEV; + info("OV7660 sensor detected"); + break; + case SENSOR_OV7670: + if (ov7670_init_sensor(gspca_dev) < 0) + return -ENODEV; + info("OV7670 sensor detected"); + break; + case SENSOR_MT9VPRB: + if (mt9v_init_sensor(gspca_dev) < 0) + return -ENODEV; + break; + case SENSOR_MT9M111: + if (mt9m111_init_sensor(gspca_dev) < 0) + return -ENODEV; + info("MT9M111 sensor detected"); + break; + case SENSOR_MT9M001: + if (mt9m001_init_sensor(gspca_dev) < 0) + return -ENODEV; + info("MT9M001 sensor detected"); + break; + case SENSOR_HV7131R: + if (hv7131r_init_sensor(gspca_dev) < 0) + return -ENODEV; + info("HV7131R sensor detected"); + break; + default: + info("Unsupported Sensor"); + return -ENODEV; + } + + return 0; +} + +static void configure_sensor_output(struct gspca_dev *gspca_dev, int mode) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 value; + switch (sd->sensor) { + case SENSOR_OV9650: + if (mode & MODE_SXGA) { + i2c_w1(gspca_dev, 0x17, 0x1b); + i2c_w1(gspca_dev, 0x18, 0xbc); + i2c_w1(gspca_dev, 0x19, 0x01); + i2c_w1(gspca_dev, 0x1a, 0x82); + i2c_r1(gspca_dev, 0x12, &value); + i2c_w1(gspca_dev, 0x12, value & 0x07); + } else { + i2c_w1(gspca_dev, 0x17, 0x24); + i2c_w1(gspca_dev, 0x18, 0xc5); + i2c_w1(gspca_dev, 0x19, 0x00); + i2c_w1(gspca_dev, 0x1a, 0x3c); + i2c_r1(gspca_dev, 0x12, &value); + i2c_w1(gspca_dev, 0x12, (value & 0x7) | 0x40); + } + break; + } +} + +#define HW_WIN(mode, hstart, vstart) \ +((const u8 []){hstart & 0xff, hstart >> 8, \ +vstart & 0xff, vstart >> 8, \ +(mode & MODE_SXGA ? 1280 >> 4 : 640 >> 4), \ +(mode & MODE_SXGA ? 1024 >> 3 : 480 >> 3)}) + +#define CLR_WIN(width, height) \ +((const u8 [])\ +{0, width >> 2, 0, height >> 1,\ +((width >> 10) & 0x01) | ((height >> 8) & 0x6)}) + +static int sd_start(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; + int width = gspca_dev->width; + int height = gspca_dev->height; + u8 fmt, scale = 0; + + sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); + if (sd->jpeg_hdr == NULL) + return -ENOMEM; + + jpeg_define(sd->jpeg_hdr, height, width, + 0x21); + jpeg_set_qual(sd->jpeg_hdr, sd->quality); + + if (mode & MODE_RAW) + fmt = 0x2d; + else if (mode & MODE_JPEG) + fmt = 0x2c; + else + fmt = 0x2f; + + switch (mode & 0x0f) { + case 3: + scale = 0xc0; + info("Set 1280x1024"); + break; + case 2: + scale = 0x80; + info("Set 640x480"); + break; + case 1: + scale = 0x90; + info("Set 320x240"); + break; + case 0: + scale = 0xa0; + info("Set 160x120"); + break; + } + + configure_sensor_output(gspca_dev, mode); + reg_w(gspca_dev, 0x1100, sd->jpeg_hdr + JPEG_QT0_OFFSET, 64); + reg_w(gspca_dev, 0x1140, sd->jpeg_hdr + JPEG_QT1_OFFSET, 64); + reg_w(gspca_dev, 0x10fb, CLR_WIN(width, height), 5); + reg_w(gspca_dev, 0x1180, HW_WIN(mode, sd->hstart, sd->vstart), 6); + reg_w1(gspca_dev, 0x1189, scale); + reg_w1(gspca_dev, 0x10e0, fmt); + + set_cmatrix(gspca_dev); + set_gamma(gspca_dev); + set_redblue(gspca_dev); + set_gain(gspca_dev); + set_exposure(gspca_dev); + set_hvflip(gspca_dev); + + reg_r(gspca_dev, 0x1061, 1); + reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] | 0x02); + return 0; +} + +static void sd_stopN(struct gspca_dev *gspca_dev) +{ + reg_r(gspca_dev, 0x1061, 1); + reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] & ~0x02); +} + +static void sd_stop0(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + kfree(sd->jpeg_hdr); +} + +static void do_autoexposure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int avg_lum, new_exp; + + if (!sd->auto_exposure) + return; + + avg_lum = atomic_read(&sd->avg_lum); + + /* + * some hardcoded values are present + * like those for maximal/minimal exposure + * and exposure steps + */ + if (avg_lum < MIN_AVG_LUM) { + if (sd->exposure > 0x1770) + return; + + new_exp = sd->exposure + sd->exposure_step; + if (new_exp > 0x1770) + new_exp = 0x1770; + if (new_exp < 0x10) + new_exp = 0x10; + sd->exposure = new_exp; + set_exposure(gspca_dev); + + sd->older_step = sd->old_step; + sd->old_step = 1; + + if (sd->old_step ^ sd->older_step) + sd->exposure_step /= 2; + else + sd->exposure_step += 2; + } + if (avg_lum > MAX_AVG_LUM) { + if (sd->exposure < 0x10) + return; + new_exp = sd->exposure - sd->exposure_step; + if (new_exp > 0x1700) + new_exp = 0x1770; + if (new_exp < 0x10) + new_exp = 0x10; + sd->exposure = new_exp; + set_exposure(gspca_dev); + sd->older_step = sd->old_step; + sd->old_step = 0; + + if (sd->old_step ^ sd->older_step) + sd->exposure_step /= 2; + else + sd->exposure_step += 2; + } +} + +static void sd_pkt_scan(struct gspca_dev *gspca_dev, + struct gspca_frame *frame, /* target */ + u8 *data, /* isoc packet */ + int len) /* iso packet length */ +{ + struct sd *sd = (struct sd *) gspca_dev; + int avg_lum; + static unsigned char frame_header[] = + {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96}; + if (len == 64 && memcmp(data, frame_header, 6) == 0) { + avg_lum = ((data[35] >> 2) & 3) | + (data[20] << 2) | + (data[19] << 10); + avg_lum += ((data[35] >> 4) & 3) | + (data[22] << 2) | + (data[21] << 10); + avg_lum += ((data[35] >> 6) & 3) | + (data[24] << 2) | + (data[23] << 10); + avg_lum += (data[36] & 3) | + (data[26] << 2) | + (data[25] << 10); + avg_lum += ((data[36] >> 2) & 3) | + (data[28] << 2) | + (data[27] << 10); + avg_lum += ((data[36] >> 4) & 3) | + (data[30] << 2) | + (data[29] << 10); + avg_lum += ((data[36] >> 6) & 3) | + (data[32] << 2) | + (data[31] << 10); + avg_lum += ((data[44] >> 4) & 3) | + (data[34] << 2) | + (data[33] << 10); + avg_lum >>= 9; + atomic_set(&sd->avg_lum, avg_lum); + gspca_frame_add(gspca_dev, LAST_PACKET, + frame, data, len); + return; + } + if (gspca_dev->last_packet_type == LAST_PACKET) { + if (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv + & MODE_JPEG) { + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, + sd->jpeg_hdr, JPEG_HDR_SZ); + gspca_frame_add(gspca_dev, INTER_PACKET, frame, + data, len); + } else { + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, + data, len); + } + } else { + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); + } +} + +/* sub-driver description */ +static const struct sd_desc sd_desc = { + .name = MODULE_NAME, + .ctrls = sd_ctrls, + .nctrls = ARRAY_SIZE(sd_ctrls), + .config = sd_config, + .init = sd_init, + .start = sd_start, + .stopN = sd_stopN, + .stop0 = sd_stop0, + .pkt_scan = sd_pkt_scan, + .dq_callback = do_autoexposure, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .set_register = sd_dbg_s_register, + .get_register = sd_dbg_g_register, +#endif + .get_chip_ident = sd_chip_ident, +}; + +#define SN9C20X(sensor, i2c_addr, button_mask) \ + .driver_info = (button_mask << 16) \ + | (SENSOR_ ## sensor << 8) \ + | (i2c_addr) + +static const __devinitdata struct usb_device_id device_table[] = { + {USB_DEVICE(0x0c45, 0x6240), SN9C20X(MT9M001, 0x5d, 0)}, + {USB_DEVICE(0x0c45, 0x6242), SN9C20X(MT9M111, 0x5d, 0)}, + {USB_DEVICE(0x0c45, 0x6248), SN9C20X(OV9655, 0x30, 0)}, + {USB_DEVICE(0x0c45, 0x624e), SN9C20X(SOI968, 0x30, 0x10)}, + {USB_DEVICE(0x0c45, 0x624f), SN9C20X(OV9650, 0x30, 0)}, + {USB_DEVICE(0x0c45, 0x6251), SN9C20X(OV9650, 0x30, 0)}, + {USB_DEVICE(0x0c45, 0x6253), SN9C20X(OV9650, 0x30, 0)}, + {USB_DEVICE(0x0c45, 0x6260), SN9C20X(OV7670, 0x21, 0)}, + {USB_DEVICE(0x0c45, 0x6270), SN9C20X(MT9VPRB, 0x00, 0)}, + {USB_DEVICE(0x0c45, 0x627b), SN9C20X(OV7660, 0x21, 0)}, + {USB_DEVICE(0x0c45, 0x627c), SN9C20X(HV7131R, 0x11, 0)}, + {USB_DEVICE(0x0c45, 0x627f), SN9C20X(OV9650, 0x30, 0)}, + {USB_DEVICE(0x0c45, 0x6280), SN9C20X(MT9M001, 0x5d, 0)}, + {USB_DEVICE(0x0c45, 0x6282), SN9C20X(MT9M111, 0x5d, 0)}, + {USB_DEVICE(0x0c45, 0x6288), SN9C20X(OV9655, 0x30, 0)}, + {USB_DEVICE(0x0c45, 0x628e), SN9C20X(SOI968, 0x30, 0)}, + {USB_DEVICE(0x0c45, 0x628f), SN9C20X(OV9650, 0x30, 0)}, + {USB_DEVICE(0x0c45, 0x62a0), SN9C20X(OV7670, 0x21, 0)}, + {USB_DEVICE(0x0c45, 0x62b0), SN9C20X(MT9VPRB, 0x00, 0)}, + {USB_DEVICE(0x0c45, 0x62b3), SN9C20X(OV9655, 0x30, 0)}, + {USB_DEVICE(0x0c45, 0x62bb), SN9C20X(OV7660, 0x21, 0)}, + {USB_DEVICE(0x0c45, 0x62bc), SN9C20X(HV7131R, 0x11, 0)}, + {USB_DEVICE(0x045e, 0x00f4), SN9C20X(OV9650, 0x30, 0)}, + {USB_DEVICE(0x145f, 0x013d), SN9C20X(OV7660, 0x21, 0)}, + {USB_DEVICE(0x0458, 0x7029), SN9C20X(HV7131R, 0x11, 0)}, + {USB_DEVICE(0xa168, 0x0610), SN9C20X(HV7131R, 0x11, 0)}, + {USB_DEVICE(0xa168, 0x0611), SN9C20X(HV7131R, 0x11, 0)}, + {USB_DEVICE(0xa168, 0x0613), SN9C20X(HV7131R, 0x11, 0)}, + {USB_DEVICE(0xa168, 0x0618), SN9C20X(HV7131R, 0x11, 0)}, + {USB_DEVICE(0xa168, 0x0614), SN9C20X(MT9M111, 0x5d, 0)}, + {USB_DEVICE(0xa168, 0x0615), SN9C20X(MT9M111, 0x5d, 0)}, + {USB_DEVICE(0xa168, 0x0617), SN9C20X(MT9M111, 0x5d, 0)}, + {} +}; +MODULE_DEVICE_TABLE(usb, device_table); + +/* -- device connect -- */ +static int sd_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), + THIS_MODULE); +} + +static void sd_disconnect(struct usb_interface *intf) +{ +#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV + struct gspca_dev *gspca_dev = usb_get_intfdata(intf); + + sn9c20x_input_cleanup(gspca_dev); +#endif + + gspca_disconnect(intf); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = device_table, + .probe = sd_probe, + .disconnect = sd_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 23) + .reset_resume = gspca_resume, +#endif +#endif +}; + +/* -- module insert / remove -- */ +static int __init sd_mod_init(void) +{ + int ret; + ret = usb_register(&sd_driver); + if (ret < 0) + return ret; + info("registered"); + return 0; +} +static void __exit sd_mod_exit(void) +{ + usb_deregister(&sd_driver); + info("deregistered"); +} + +module_init(sd_mod_init); +module_exit(sd_mod_exit); diff --git a/linux/drivers/media/video/gspca/sonixj.c b/linux/drivers/media/video/gspca/sonixj.c index a4c935d69..5568401e8 100644 --- a/linux/drivers/media/video/gspca/sonixj.c +++ b/linux/drivers/media/video/gspca/sonixj.c @@ -46,6 +46,7 @@ struct sd { u8 gamma; u8 vflip; /* ov7630/ov7648 only */ u8 infrared; /* mt9v111 only */ + u8 freq; /* ov76xx only */ u8 quality; /* image quality */ #define QUALITY_MIN 60 #define QUALITY_MAX 95 @@ -96,8 +97,11 @@ static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setinfrared(struct gspca_dev *gspca_dev, __s32 val); static int sd_getinfrared(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val); static struct ctrl sd_ctrls[] = { +#define BRIGHTNESS_IDX 0 { { .id = V4L2_CID_BRIGHTNESS, @@ -113,6 +117,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setbrightness, .get = sd_getbrightness, }, +#define CONTRAST_IDX 1 { { .id = V4L2_CID_CONTRAST, @@ -128,20 +133,22 @@ static struct ctrl sd_ctrls[] = { .set = sd_setcontrast, .get = sd_getcontrast, }, +#define COLOR_IDX 2 { { .id = V4L2_CID_SATURATION, .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Color", + .name = "Saturation", .minimum = 0, .maximum = 40, .step = 1, -#define COLOR_DEF 32 +#define COLOR_DEF 25 .default_value = COLOR_DEF, }, .set = sd_setcolors, .get = sd_getcolors, }, +#define BLUE_BALANCE_IDX 3 { { .id = V4L2_CID_BLUE_BALANCE, @@ -156,6 +163,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setblue_balance, .get = sd_getblue_balance, }, +#define RED_BALANCE_IDX 4 { { .id = V4L2_CID_RED_BALANCE, @@ -170,6 +178,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setred_balance, .get = sd_getred_balance, }, +#define GAMMA_IDX 5 { { .id = V4L2_CID_GAMMA, @@ -184,7 +193,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setgamma, .get = sd_getgamma, }, -#define AUTOGAIN_IDX 5 +#define AUTOGAIN_IDX 6 { { .id = V4L2_CID_AUTOGAIN, @@ -200,7 +209,7 @@ static struct ctrl sd_ctrls[] = { .get = sd_getautogain, }, /* ov7630/ov7648 only */ -#define VFLIP_IDX 6 +#define VFLIP_IDX 7 { { .id = V4L2_CID_VFLIP, @@ -209,14 +218,14 @@ static struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define VFLIP_DEF 0 /* vflip def = 1 for ov7630 */ +#define VFLIP_DEF 0 .default_value = VFLIP_DEF, }, .set = sd_setvflip, .get = sd_getvflip, }, /* mt9v111 only */ -#define INFRARED_IDX 7 +#define INFRARED_IDX 8 { { .id = V4L2_CID_INFRARED, @@ -231,32 +240,48 @@ static struct ctrl sd_ctrls[] = { .set = sd_setinfrared, .get = sd_getinfrared, }, +/* ov7630/ov7648/ov7660 only */ +#define FREQ_IDX 9 + { + { + .id = V4L2_CID_POWER_LINE_FREQUENCY, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Light frequency filter", + .minimum = 0, + .maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */ + .step = 1, +#define FREQ_DEF 2 + .default_value = FREQ_DEF, + }, + .set = sd_setfreq, + .get = sd_getfreq, + }, }; /* table of the disabled controls */ static __u32 ctrl_dis[] = { - (1 << INFRARED_IDX) | (1 << VFLIP_IDX), + (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX), /* SENSOR_HV7131R 0 */ - (1 << INFRARED_IDX) | (1 << VFLIP_IDX), + (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX), /* SENSOR_MI0360 1 */ - (1 << INFRARED_IDX) | (1 << VFLIP_IDX), + (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX), /* SENSOR_MO4000 2 */ #if 1 - (1 << VFLIP_IDX), + (1 << VFLIP_IDX) | (1 << FREQ_IDX), #else - (1 << AUTOGAIN_IDX) | (1 << VFLIP_IDX), + (1 << AUTOGAIN_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX), #endif /* SENSOR_MT9V111 3 */ - (1 << INFRARED_IDX) | (1 << VFLIP_IDX), + (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX), /* SENSOR_OM6802 4 */ - (1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX), + (1 << INFRARED_IDX), /* SENSOR_OV7630 5 */ (1 << INFRARED_IDX), /* SENSOR_OV7648 6 */ (1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX), /* SENSOR_OV7660 7 */ - (1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX), - /* SENSOR_SP80708 8 */ + (1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | + (1 << FREQ_IDX), /* SENSOR_SP80708 8 */ }; static const struct v4l2_pix_format vga_mode[] = { @@ -272,7 +297,8 @@ static const struct v4l2_pix_format vga_mode[] = { .priv = 1}, {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 640, - .sizeimage = 640 * 480 * 3 / 8 + 590, + /* Note 3 / 8 is not large enough, not even 5 / 8 is ?! */ + .sizeimage = 640 * 480 * 3 / 4 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 0}, }; @@ -612,7 +638,9 @@ static const u8 ov7630_sensor_init[][8] = { /* win: i2c_r from 00 to 80 */ {0xd1, 0x21, 0x03, 0x80, 0x10, 0x20, 0x80, 0x10}, {0xb1, 0x21, 0x0c, 0x20, 0x20, 0x00, 0x00, 0x10}, - {0xd1, 0x21, 0x11, 0x00, 0x48, 0xc0, 0x00, 0x10}, +/* HDG: 0x11 was 0x00 change to 0x01 for better exposure (15 fps instead of 30) + 0x13 was 0xc0 change to 0xc3 for auto gain and exposure */ + {0xd1, 0x21, 0x11, 0x01, 0x48, 0xc3, 0x00, 0x10}, {0xb1, 0x21, 0x15, 0x80, 0x03, 0x00, 0x00, 0x10}, {0xd1, 0x21, 0x17, 0x1b, 0xbd, 0x05, 0xf6, 0x10}, {0xa1, 0x21, 0x1b, 0x04, 0x00, 0x00, 0x00, 0x10}, @@ -646,9 +674,8 @@ static const u8 ov7630_sensor_init[][8] = { {0xa1, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10}, {0xb1, 0x21, 0x01, 0x80, 0x80, 0x00, 0x00, 0x10}, /* */ - {0xa1, 0x21, 0x11, 0x00, 0x00, 0x00, 0x00, 0x10}, - {0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10}, - {0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10}, +/* {0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10}, * set by setfreq */ +/* {0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10}, * set by setfreq */ /* */ {0xa1, 0x21, 0x10, 0x83, 0x00, 0x00, 0x00, 0x10}, /* {0xb1, 0x21, 0x01, 0x88, 0x70, 0x00, 0x00, 0x10}, */ @@ -681,7 +708,7 @@ static const u8 ov7648_sensor_init[][8] = { {0xd1, 0x21, 0x21, 0x86, 0x00, 0xde, 0xa0, 0x10}, /* {0xd1, 0x21, 0x25, 0x80, 0x32, 0xfe, 0xa0, 0x10}, jfm done */ /* {0xd1, 0x21, 0x29, 0x00, 0x91, 0x00, 0x88, 0x10}, jfm done */ - {0xb1, 0x21, 0x2d, 0x85, 0x00, 0x00, 0x00, 0x10}, +/* {0xb1, 0x21, 0x2d, 0x85, 0x00, 0x00, 0x00, 0x10}, set by setfreq */ /*...*/ /* {0xa1, 0x21, 0x12, 0x08, 0x00, 0x00, 0x00, 0x10}, jfm done */ /* {0xa1, 0x21, 0x75, 0x06, 0x00, 0x00, 0x00, 0x10}, * COMN @@ -708,13 +735,17 @@ static const u8 ov7660_sensor_init[][8] = { {0xa1, 0x21, 0x12, 0x05, 0x00, 0x00, 0x00, 0x10}, /* Outformat = rawRGB */ {0xa1, 0x21, 0x13, 0xb8, 0x00, 0x00, 0x00, 0x10}, /* init COM8 */ - {0xd1, 0x21, 0x00, 0x01, 0x74, 0x74, 0x00, 0x10}, + {0xd1, 0x21, 0x00, 0x01, 0x74, 0x92, 0x00, 0x10}, /* GAIN BLUE RED VREF */ {0xd1, 0x21, 0x04, 0x00, 0x7d, 0x62, 0x00, 0x10}, /* COM 1 BAVE GEAVE AECHH */ {0xb1, 0x21, 0x08, 0x83, 0x01, 0x00, 0x00, 0x10}, /* RAVE COM2 */ {0xd1, 0x21, 0x0c, 0x00, 0x08, 0x04, 0x4f, 0x10}, /* COM 3 4 5 6 */ +#if 1 + {0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xf8, 0x10}, +#else {0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xff, 0x10}, +#endif /* AECH CLKRC COM7 COM8 */ {0xc1, 0x21, 0x14, 0x2c, 0x00, 0x02, 0x00, 0x10}, /* COM9 COM10 */ {0xd1, 0x21, 0x17, 0x10, 0x60, 0x02, 0x7b, 0x10}, @@ -1310,11 +1341,9 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->gamma = GAMMA_DEF; sd->autogain = AUTOGAIN_DEF; sd->ag_cnt = -1; - if (sd->sensor != SENSOR_OV7630) - sd->vflip = 0; - else - sd->vflip = 1; + sd->vflip = VFLIP_DEF; sd->infrared = INFRARED_DEF; + sd->freq = FREQ_DEF; sd->quality = QUALITY_DEF; sd->jpegqual = 80; @@ -1595,7 +1624,7 @@ static void setautogain(struct gspca_dev *gspca_dev) else comb = 0xa0; if (sd->autogain) - comb |= 0x02; + comb |= 0x03; i2c_w1(&sd->gspca_dev, 0x13, comb); return; } @@ -1611,12 +1640,15 @@ static void setvflip(struct sd *sd) { u8 comn; - if (sd->sensor == SENSOR_OV7630) + if (sd->sensor == SENSOR_OV7630) { comn = 0x02; - else + if (!sd->vflip) + comn |= 0x80; + } else { comn = 0x06; - if (sd->vflip) - comn |= 0x80; + if (sd->vflip) + comn |= 0x80; + } i2c_w1(&sd->gspca_dev, 0x75, comn); } @@ -1634,6 +1666,67 @@ static void setinfrared(struct sd *sd) #endif } +static void setfreq(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (gspca_dev->ctrl_dis & (1 << FREQ_IDX)) + return; + if (sd->sensor == SENSOR_OV7660) { + u8 com8; + +#if 1 + com8 = 0xf8; /* no auto gain/wb/expo */ +#else + com8 = 0xff; +#endif + switch (sd->freq) { + case 0: /* Banding filter disabled */ + i2c_w1(gspca_dev, 0x13, com8 & 0xdf); + break; + case 1: /* 50 hz */ + i2c_w1(gspca_dev, 0x13, com8); + i2c_w1(gspca_dev, 0x3b, 0x0a); + break; + case 2: /* 60 hz */ + i2c_w1(gspca_dev, 0x13, com8); + i2c_w1(gspca_dev, 0x3b, 0x02); + break; + } + } else { + u8 reg2a = 0, reg2b = 0, reg2d = 0; + + /* Get reg2a / reg2d base values */ + switch (sd->sensor) { + case SENSOR_OV7630: + reg2a = 0x08; + reg2d = 0x01; + break; + case SENSOR_OV7648: + reg2a = 0x11; + reg2d = 0x81; + break; + } + + switch (sd->freq) { + case 0: /* Banding filter disabled */ + break; + case 1: /* 50 hz (filter on and framerate adj) */ + reg2a |= 0x80; + reg2b = 0xac; + reg2d |= 0x04; + break; + case 2: /* 60 hz (filter on, no framerate adj) */ + reg2a |= 0x80; + reg2d |= 0x04; + break; + } + i2c_w1(gspca_dev, 0x2a, reg2a); + i2c_w1(gspca_dev, 0x2b, reg2b); + i2c_w1(gspca_dev, 0x2d, reg2d); + } +} + static void setjpegqual(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -1687,6 +1780,8 @@ static int sd_start(struct gspca_dev *gspca_dev) /* create the JPEG header */ sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); + if (!sd->jpeg_hdr) + return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x21); /* JPEG 422 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); @@ -1865,6 +1960,7 @@ static int sd_start(struct gspca_dev *gspca_dev) setbrightness(gspca_dev); setcontrast(gspca_dev); setautogain(gspca_dev); + setfreq(gspca_dev); return 0; } @@ -2168,6 +2264,24 @@ static int sd_getinfrared(struct gspca_dev *gspca_dev, __s32 *val) return 0; } +static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->freq = val; + if (gspca_dev->streaming) + setfreq(gspca_dev); + return 0; +} + +static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->freq; + return 0; +} + static int sd_set_jcomp(struct gspca_dev *gspca_dev, struct v4l2_jpegcompression *jcomp) { @@ -2196,6 +2310,27 @@ static int sd_get_jcomp(struct gspca_dev *gspca_dev, return 0; } +static int sd_querymenu(struct gspca_dev *gspca_dev, + struct v4l2_querymenu *menu) +{ + switch (menu->id) { + case V4L2_CID_POWER_LINE_FREQUENCY: + switch (menu->index) { + case 0: /* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */ + strcpy((char *) menu->name, "NoFliker"); + return 0; + case 1: /* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */ + strcpy((char *) menu->name, "50 Hz"); + return 0; + case 2: /* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */ + strcpy((char *) menu->name, "60 Hz"); + return 0; + } + break; + } + return -EINVAL; +} + /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, @@ -2210,6 +2345,7 @@ static const struct sd_desc sd_desc = { .dq_callback = do_autogain, .get_jcomp = sd_get_jcomp, .set_jcomp = sd_set_jcomp, + .querymenu = sd_querymenu, }; /* -- module initialisation -- */ @@ -2270,7 +2406,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x613b), BSI(SN9C120, OV7660, 0x21)}, #endif {USB_DEVICE(0x0c45, 0x613c), BSI(SN9C120, HV7131R, 0x11)}, -/* {USB_DEVICE(0x0c45, 0x613e), BSI(SN9C120, OV7630, 0x??)}, */ + {USB_DEVICE(0x0c45, 0x613e), BSI(SN9C120, OV7630, 0x21)}, {USB_DEVICE(0x0c45, 0x6143), BSI(SN9C120, SP80708, 0x18)}, {} }; diff --git a/linux/drivers/media/video/gspca/spca500.c b/linux/drivers/media/video/gspca/spca500.c index 9717da6af..1fbad8d8f 100644 --- a/linux/drivers/media/video/gspca/spca500.c +++ b/linux/drivers/media/video/gspca/spca500.c @@ -687,6 +687,8 @@ static int sd_start(struct gspca_dev *gspca_dev) /* create the JPEG header */ sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); + if (!sd->jpeg_hdr) + return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x22); /* JPEG 411 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); diff --git a/linux/drivers/media/video/gspca/spca505.c b/linux/drivers/media/video/gspca/spca505.c index 2acec58b1..ea8c9fe2e 100644 --- a/linux/drivers/media/video/gspca/spca505.c +++ b/linux/drivers/media/video/gspca/spca505.c @@ -637,19 +637,19 @@ static int sd_config(struct gspca_dev *gspca_dev, cam->nmodes = ARRAY_SIZE(vga_mode) - 1; sd->brightness = BRIGHTNESS_DEF; - if (sd->subtype == Nxultra) { - if (write_vector(gspca_dev, spca505b_init_data)) - return -EIO; - } else { - if (write_vector(gspca_dev, spca505_init_data)) - return -EIO; - } return 0; } /* this function is called at probe and resume time */ static int sd_init(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; + + if (write_vector(gspca_dev, + sd->subtype == Nxultra + ? spca505b_init_data + : spca505_init_data)) + return -EIO; return 0; } diff --git a/linux/drivers/media/video/gspca/spca508.c b/linux/drivers/media/video/gspca/spca508.c index 7fd8079c2..10006e257 100644 --- a/linux/drivers/media/video/gspca/spca508.c +++ b/linux/drivers/media/video/gspca/spca508.c @@ -1350,19 +1350,70 @@ static int reg_read(struct gspca_dev *gspca_dev, return gspca_dev->usb_buf[0]; } +/* send 1 or 2 bytes to the sensor via the Synchronous Serial Interface */ +static int ssi_w(struct gspca_dev *gspca_dev, + u16 reg, u16 val) +{ + struct usb_device *dev = gspca_dev->dev; + int ret, retry; + + ret = reg_write(dev, 0x8802, reg >> 8); + if (ret < 0) + goto out; + ret = reg_write(dev, 0x8801, reg & 0x00ff); + if (ret < 0) + goto out; + if ((reg & 0xff00) == 0x1000) { /* if 2 bytes */ + ret = reg_write(dev, 0x8805, val & 0x00ff); + if (ret < 0) + goto out; + val >>= 8; + } + ret = reg_write(dev, 0x8800, val); + if (ret < 0) + goto out; + + /* poll until not busy */ + retry = 10; + for (;;) { + ret = reg_read(gspca_dev, 0x8803); + if (ret < 0) + break; + if (gspca_dev->usb_buf[0] == 0) + break; + if (--retry <= 0) { + PDEBUG(D_ERR, "ssi_w busy %02x", + gspca_dev->usb_buf[0]); + ret = -1; + break; + } + msleep(8); + } + +out: + return ret; +} + static int write_vector(struct gspca_dev *gspca_dev, const u16 (*data)[2]) { struct usb_device *dev = gspca_dev->dev; - int ret; + int ret = 0; while ((*data)[1] != 0) { - ret = reg_write(dev, (*data)[1], (*data)[0]); + if ((*data)[1] & 0x8000) { + if ((*data)[1] == 0xdd00) /* delay */ + msleep((*data)[0]); + else + ret = reg_write(dev, (*data)[1], (*data)[0]); + } else { + ret = ssi_w(gspca_dev, (*data)[1], (*data)[0]); + } if (ret < 0) - return ret; + break; data++; } - return 0; + return ret; } /* this function is called at probe time */ diff --git a/linux/drivers/media/video/gspca/stk014.c b/linux/drivers/media/video/gspca/stk014.c index f25be20cf..476289648 100644 --- a/linux/drivers/media/video/gspca/stk014.c +++ b/linux/drivers/media/video/gspca/stk014.c @@ -333,6 +333,8 @@ static int sd_start(struct gspca_dev *gspca_dev) /* create the JPEG header */ sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); + if (!sd->jpeg_hdr) + return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x22); /* JPEG 411 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); diff --git a/linux/drivers/media/video/gspca/stv06xx/Makefile b/linux/drivers/media/video/gspca/stv06xx/Makefile index feeaa94ab..2f3c3a606 100644 --- a/linux/drivers/media/video/gspca/stv06xx/Makefile +++ b/linux/drivers/media/video/gspca/stv06xx/Makefile @@ -3,7 +3,8 @@ obj-$(CONFIG_USB_STV06XX) += gspca_stv06xx.o gspca_stv06xx-objs := stv06xx.o \ stv06xx_vv6410.o \ stv06xx_hdcs.o \ - stv06xx_pb0100.o + stv06xx_pb0100.o \ + stv06xx_st6422.o EXTRA_CFLAGS += -Idrivers/media/video/gspca diff --git a/linux/drivers/media/video/gspca/stv06xx/stv06xx.c b/linux/drivers/media/video/gspca/stv06xx/stv06xx.c index 9dff2e65b..0da8e0de0 100644 --- a/linux/drivers/media/video/gspca/stv06xx/stv06xx.c +++ b/linux/drivers/media/video/gspca/stv06xx/stv06xx.c @@ -92,11 +92,10 @@ static int stv06xx_write_sensor_finish(struct sd *sd) { int err = 0; - if (IS_850(sd)) { + if (sd->bridge == BRIDGE_STV610) { struct usb_device *udev = sd->gspca_dev.dev; __u8 *buf = sd->gspca_dev.usb_buf; - /* Quickam Web needs an extra packet */ buf[0] = 0; err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x04, 0x40, 0x1704, 0, buf, 1, @@ -253,7 +252,7 @@ static int stv06xx_init(struct gspca_dev *gspca_dev) err = sd->sensor->init(sd); - if (dump_sensor) + if (dump_sensor && sd->sensor->dump) sd->sensor->dump(sd); return (err < 0) ? err : 0; @@ -293,8 +292,6 @@ static void stv06xx_stopN(struct gspca_dev *gspca_dev) goto out; err = sd->sensor->stop(sd); - if (err < 0) - goto out; out: if (err < 0) @@ -320,6 +317,8 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev, __u8 *data, /* isoc packet */ int len) /* iso packet length */ { + struct sd *sd = (struct sd *) gspca_dev; + PDEBUG(D_PACK, "Packet of length %d arrived", len); /* A packet may contain several frames @@ -345,14 +344,29 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev, if (len < chunk_len) { PDEBUG(D_ERR, "URB packet length is smaller" " than the specified chunk length"); + gspca_dev->last_packet_type = DISCARD_PACKET; return; } + /* First byte seem to be 02=data 2nd byte is unknown??? */ + if (sd->bridge == BRIDGE_ST6422 && (id & 0xFF00) == 0x0200) + goto frame_data; + switch (id) { case 0x0200: case 0x4200: +frame_data: PDEBUG(D_PACK, "Frame data packet detected"); + if (sd->to_skip) { + int skip = (sd->to_skip < chunk_len) ? + sd->to_skip : chunk_len; + data += skip; + len -= skip; + chunk_len -= skip; + sd->to_skip -= skip; + } + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, chunk_len); break; @@ -367,6 +381,9 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev, gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0); + if (sd->bridge == BRIDGE_ST6422) + sd->to_skip = gspca_dev->width * 4; + if (chunk_len) PDEBUG(D_ERR, "Chunk length is " "non-zero on a SOF"); @@ -397,8 +414,12 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev, /* Unknown chunk with 2 bytes of data, occurs 2-3 times per USB interrupt */ break; + case 0x42ff: + PDEBUG(D_PACK, "Chunk 0x42ff detected"); + /* Special chunk seen sometimes on the ST6422 */ + break; default: - PDEBUG(D_PACK, "Unknown chunk %d detected", id); + PDEBUG(D_PACK, "Unknown chunk 0x%04x detected", id); /* Unknown chunk */ } data += chunk_len; @@ -430,11 +451,16 @@ static int stv06xx_config(struct gspca_dev *gspca_dev, cam = &gspca_dev->cam; sd->desc = sd_desc; + sd->bridge = id->driver_info; gspca_dev->sd_desc = &sd->desc; if (dump_bridge) stv06xx_dump_bridge(sd); + sd->sensor = &stv06xx_sensor_st6422; + if (!sd->sensor->probe(sd)) + return 0; + sd->sensor = &stv06xx_sensor_vv6410; if (!sd->sensor->probe(sd)) return 0; @@ -459,9 +485,20 @@ static int stv06xx_config(struct gspca_dev *gspca_dev, /* -- module initialisation -- */ static const __devinitdata struct usb_device_id device_table[] = { - {USB_DEVICE(0x046d, 0x0840)}, /* QuickCam Express */ - {USB_DEVICE(0x046d, 0x0850)}, /* LEGO cam / QuickCam Web */ - {USB_DEVICE(0x046d, 0x0870)}, /* Dexxa WebCam USB */ + /* QuickCam Express */ + {USB_DEVICE(0x046d, 0x0840), .driver_info = BRIDGE_STV600 }, + /* LEGO cam / QuickCam Web */ + {USB_DEVICE(0x046d, 0x0850), .driver_info = BRIDGE_STV610 }, + /* Dexxa WebCam USB */ + {USB_DEVICE(0x046d, 0x0870), .driver_info = BRIDGE_STV602 }, + /* QuickCam Messenger */ + {USB_DEVICE(0x046D, 0x08F0), .driver_info = BRIDGE_ST6422 }, + /* QuickCam Communicate */ + {USB_DEVICE(0x046D, 0x08F5), .driver_info = BRIDGE_ST6422 }, + /* QuickCam Messenger (new) */ + {USB_DEVICE(0x046D, 0x08F6), .driver_info = BRIDGE_ST6422 }, + /* QuickCam Messenger (new) */ + {USB_DEVICE(0x046D, 0x08DA), .driver_info = BRIDGE_ST6422 }, {} }; MODULE_DEVICE_TABLE(usb, device_table); diff --git a/linux/drivers/media/video/gspca/stv06xx/stv06xx.h b/linux/drivers/media/video/gspca/stv06xx/stv06xx.h index 1207e7d17..bdea4dae2 100644 --- a/linux/drivers/media/video/gspca/stv06xx/stv06xx.h +++ b/linux/drivers/media/video/gspca/stv06xx/stv06xx.h @@ -31,15 +31,12 @@ #define STV06XX_H_ #include "gspca.h" +#include "compat.h" #define MODULE_NAME "STV06xx" #define STV_ISOC_ENDPOINT_ADDR 0x81 -#ifndef V4L2_PIX_FMT_SGRBG8 -#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') -#endif - #define STV_REG23 0x0423 /* Control registers of the STV0600 ASIC */ @@ -93,6 +90,17 @@ struct sd { /* Sensor private data */ void *sensor_priv; + + /* The first 4 lines produced by the stv6422 are no good, this keeps + track of how many bytes we still need to skip during a frame */ + int to_skip; + + /* Bridge / Camera type */ + u8 bridge; + #define BRIDGE_STV600 0 + #define BRIDGE_STV602 1 + #define BRIDGE_STV610 2 + #define BRIDGE_ST6422 3 /* With integrated sensor */ }; int stv06xx_write_bridge(struct sd *sd, u16 address, u16 i2c_data); diff --git a/linux/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/linux/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c index b16903814..e5024c849 100644 --- a/linux/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c +++ b/linux/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c @@ -64,7 +64,7 @@ static struct v4l2_pix_format hdcs1x00_mode[] = { { HDCS_1X00_DEF_WIDTH, HDCS_1X00_DEF_HEIGHT, - V4L2_PIX_FMT_SBGGR8, + V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, .sizeimage = HDCS_1X00_DEF_WIDTH * HDCS_1X00_DEF_HEIGHT, @@ -80,7 +80,7 @@ static struct v4l2_pix_format hdcs1020_mode[] = { { HDCS_1020_DEF_WIDTH, HDCS_1020_DEF_HEIGHT, - V4L2_PIX_FMT_SBGGR8, + V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, .sizeimage = HDCS_1020_DEF_WIDTH * HDCS_1020_DEF_HEIGHT, @@ -131,9 +131,11 @@ static int hdcs_reg_write_seq(struct sd *sd, u8 reg, u8 *vals, u8 len) (reg + len > 0xff))) return -EINVAL; - for (i = 0; i < len; i++, reg++) { - regs[2*i] = reg; - regs[2*i+1] = vals[i]; + for (i = 0; i < len; i++) { + regs[2 * i] = reg; + regs[2 * i + 1] = vals[i]; + /* All addresses are shifted left one bit as bit 0 toggles r/w */ + reg += 2; } return stv06xx_write_sensor_bytes(sd, regs, len); @@ -174,7 +176,9 @@ static int hdcs_set_state(struct sd *sd, enum hdcs_power_state state) } ret = stv06xx_write_sensor(sd, HDCS_REG_CONTROL(sd), val); - if (ret < 0) + + /* Update the state if the write succeeded */ + if (!ret) hdcs->state = state; return ret; @@ -434,7 +438,7 @@ static int hdcs_probe_1x00(struct sd *sd) hdcs->exp.er = 100; /* - * Frame rate on HDCS-1000 0x46D:0x840 depends on PSMP: + * Frame rate on HDCS-1000 with STV600 depends on PSMP: * 4 = doesn't work at all * 5 = 7.8 fps, * 6 = 6.9 fps, @@ -443,7 +447,7 @@ static int hdcs_probe_1x00(struct sd *sd) * 15 = 4.4 fps, * 31 = 2.8 fps * - * Frame rate on HDCS-1000 0x46D:0x870 depends on PSMP: + * Frame rate on HDCS-1000 with STV602 depends on PSMP: * 15 = doesn't work at all * 18 = doesn't work at all * 19 = 7.3 fps @@ -453,7 +457,7 @@ static int hdcs_probe_1x00(struct sd *sd) * 24 = 6.3 fps * 30 = 5.4 fps */ - hdcs->psmp = IS_870(sd) ? 20 : 5; + hdcs->psmp = (sd->bridge == BRIDGE_STV602) ? 20 : 5; sd->sensor_priv = hdcs; @@ -530,7 +534,7 @@ static int hdcs_init(struct sd *sd) int i, err = 0; /* Set the STV0602AA in STV0600 emulation mode */ - if (IS_870(sd)) + if (sd->bridge == BRIDGE_STV602) stv06xx_write_bridge(sd, STV_STV0600_EMULATION, 1); /* Execute the bridge init */ @@ -558,7 +562,7 @@ static int hdcs_init(struct sd *sd) return err; /* Set PGA sample duration - (was 0x7E for IS_870, but caused slow framerate with HDCS-1020) */ + (was 0x7E for the STV602, but caused slow framerate with HDCS-1020) */ if (IS_1020(sd)) err = stv06xx_write_sensor(sd, HDCS_TCTRL, (HDCS_ADC_START_SIG_DUR << 6) | hdcs->psmp); diff --git a/linux/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h b/linux/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h index e88c42f7d..934b9cebc 100644 --- a/linux/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h +++ b/linux/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h @@ -32,14 +32,13 @@ #include "stv06xx.h" -#define IS_850(sd) ((sd)->gspca_dev.dev->descriptor.idProduct == 0x850) -#define IS_870(sd) ((sd)->gspca_dev.dev->descriptor.idProduct == 0x870) #define IS_1020(sd) ((sd)->sensor == &stv06xx_sensor_hdcs1020) extern const struct stv06xx_sensor stv06xx_sensor_vv6410; extern const struct stv06xx_sensor stv06xx_sensor_hdcs1x00; extern const struct stv06xx_sensor stv06xx_sensor_hdcs1020; extern const struct stv06xx_sensor stv06xx_sensor_pb0100; +extern const struct stv06xx_sensor stv06xx_sensor_st6422; struct stv06xx_sensor { /* Defines the name of a sensor */ diff --git a/linux/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c b/linux/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c new file mode 100644 index 000000000..87cb5b9dd --- /dev/null +++ b/linux/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c @@ -0,0 +1,453 @@ +/* + * Support for the sensor part which is integrated (I think) into the + * st6422 stv06xx alike bridge, as its integrated there are no i2c writes + * but instead direct bridge writes. + * + * Copyright (c) 2009 Hans de Goede <hdegoede@redhat.com> + * + * Strongly based on qc-usb-messenger, which is: + * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher + * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland + * Copyright (c) 2002, 2003 Tuukka Toivonen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include "stv06xx_st6422.h" + +static struct v4l2_pix_format st6422_mode[] = { + /* Note we actually get 124 lines of data, of which we skip the 4st + 4 as they are garbage */ + { + 162, + 120, + V4L2_PIX_FMT_SGRBG8, + V4L2_FIELD_NONE, + .sizeimage = 162 * 120, + .bytesperline = 162, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + }, + /* Note we actually get 248 lines of data, of which we skip the 4st + 4 as they are garbage, and we tell the app it only gets the + first 240 of the 244 lines it actually gets, so that it ignores + the last 4. */ + { + 324, + 240, + V4L2_PIX_FMT_SGRBG8, + V4L2_FIELD_NONE, + .sizeimage = 324 * 244, + .bytesperline = 324, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0 + }, +}; + +static const struct ctrl st6422_ctrl[] = { +#define BRIGHTNESS_IDX 0 + { + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = 0, + .maximum = 31, + .step = 1, + .default_value = 3 + }, + .set = st6422_set_brightness, + .get = st6422_get_brightness + }, +#define CONTRAST_IDX 1 + { + { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Contrast", + .minimum = 0, + .maximum = 15, + .step = 1, + .default_value = 11 + }, + .set = st6422_set_contrast, + .get = st6422_get_contrast + }, +#define GAIN_IDX 2 + { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 64 + }, + .set = st6422_set_gain, + .get = st6422_get_gain + }, +#define EXPOSURE_IDX 3 + { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 0, + .maximum = 1023, + .step = 1, + .default_value = 256 + }, + .set = st6422_set_exposure, + .get = st6422_get_exposure + }, +}; + +static int st6422_probe(struct sd *sd) +{ + int i; + s32 *sensor_settings; + + if (sd->bridge != BRIDGE_ST6422) + return -ENODEV; + + info("st6422 sensor detected"); + + sensor_settings = kmalloc(ARRAY_SIZE(st6422_ctrl) * sizeof(s32), + GFP_KERNEL); + if (!sensor_settings) + return -ENOMEM; + + sd->gspca_dev.cam.cam_mode = st6422_mode; + sd->gspca_dev.cam.nmodes = ARRAY_SIZE(st6422_mode); + sd->desc.ctrls = st6422_ctrl; + sd->desc.nctrls = ARRAY_SIZE(st6422_ctrl); + sd->sensor_priv = sensor_settings; + + for (i = 0; i < sd->desc.nctrls; i++) + sensor_settings[i] = st6422_ctrl[i].qctrl.default_value; + + return 0; +} + +static int st6422_init(struct sd *sd) +{ + int err = 0, i; + + const u16 st6422_bridge_init[][2] = { + { STV_ISO_ENABLE, 0x00 }, /* disable capture */ + { 0x1436, 0x00 }, + { 0x1432, 0x03 }, /* 0x00-0x1F brightness */ + { 0x143a, 0xF9 }, /* 0x00-0x0F contrast */ + { 0x0509, 0x38 }, /* R */ + { 0x050a, 0x38 }, /* G */ + { 0x050b, 0x38 }, /* B */ + { 0x050c, 0x2A }, + { 0x050d, 0x01 }, + + + { 0x1431, 0x00 }, /* 0x00-0x07 ??? */ + { 0x1433, 0x34 }, /* 160x120, 0x00-0x01 night filter */ + { 0x1438, 0x18 }, /* 640x480 */ +/* 18 bayes */ +/* 10 compressed? */ + + { 0x1439, 0x00 }, +/* antiflimmer?? 0xa2 ger perfekt bild mot monitor */ + + { 0x143b, 0x05 }, + { 0x143c, 0x00 }, /* 0x00-0x01 - ??? */ + + +/* shutter time 0x0000-0x03FF */ +/* low value give good picures on moving objects (but requires much light) */ +/* high value gives good picures in darkness (but tends to be overexposed) */ + { 0x143e, 0x01 }, + { 0x143d, 0x00 }, + + { 0x1442, 0xe2 }, +/* write: 1x1x xxxx */ +/* read: 1x1x xxxx */ +/* bit 5 == button pressed and hold if 0 */ +/* write 0xe2,0xea */ + +/* 0x144a */ +/* 0x00 init */ +/* bit 7 == button has been pressed, but not handled */ + +/* interrupt */ +/* if(urb->iso_frame_desc[i].status == 0x80) { */ +/* if(urb->iso_frame_desc[i].status == 0x88) { */ + + { 0x1500, 0xd0 }, + { 0x1500, 0xd0 }, + { 0x1500, 0x50 }, /* 0x00 - 0xFF 0x80 == compr ? */ + + { 0x1501, 0xaf }, +/* high val-> ljus area blir morkare. */ +/* low val -> ljus area blir ljusare. */ + { 0x1502, 0xc2 }, +/* high val-> ljus area blir morkare. */ +/* low val -> ljus area blir ljusare. */ + { 0x1503, 0x45 }, +/* high val-> ljus area blir morkare. */ +/* low val -> ljus area blir ljusare. */ + + { 0x1505, 0x02 }, +/* 2 : 324x248 80352 bytes */ +/* 7 : 248x162 40176 bytes */ +/* c+f: 162*124 20088 bytes */ + + { 0x150e, 0x8e }, + { 0x150f, 0x37 }, + { 0x15c0, 0x00 }, + { 0x15c1, 1023 }, /* 160x120, ISOC_PACKET_SIZE */ + { 0x15c3, 0x08 }, /* 0x04/0x14 ... test pictures ??? */ + + + { 0x143f, 0x01 }, /* commit settings */ + + }; + + for (i = 0; i < ARRAY_SIZE(st6422_bridge_init) && !err; i++) { + err = stv06xx_write_bridge(sd, st6422_bridge_init[i][0], + st6422_bridge_init[i][1]); + } + + return err; +} + +static void st6422_disconnect(struct sd *sd) +{ + sd->sensor = NULL; + kfree(sd->sensor_priv); +} + +static int st6422_start(struct sd *sd) +{ + int err, packet_size; + struct cam *cam = &sd->gspca_dev.cam; + s32 *sensor_settings = sd->sensor_priv; + struct usb_host_interface *alt; + struct usb_interface *intf; + + intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); + alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); + if (!alt) { + PDEBUG(D_ERR, "Couldn't get altsetting"); + return -EIO; + } + + packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); + err = stv06xx_write_bridge(sd, 0x15c1, packet_size); + if (err < 0) + return err; + + if (cam->cam_mode[sd->gspca_dev.curr_mode].priv) + err = stv06xx_write_bridge(sd, 0x1505, 0x0f); + else + err = stv06xx_write_bridge(sd, 0x1505, 0x02); + if (err < 0) + return err; + + err = st6422_set_brightness(&sd->gspca_dev, + sensor_settings[BRIGHTNESS_IDX]); + if (err < 0) + return err; + + err = st6422_set_contrast(&sd->gspca_dev, + sensor_settings[CONTRAST_IDX]); + if (err < 0) + return err; + + err = st6422_set_exposure(&sd->gspca_dev, + sensor_settings[EXPOSURE_IDX]); + if (err < 0) + return err; + + err = st6422_set_gain(&sd->gspca_dev, + sensor_settings[GAIN_IDX]); + if (err < 0) + return err; + + PDEBUG(D_STREAM, "Starting stream"); + + return 0; +} + +static int st6422_stop(struct sd *sd) +{ + PDEBUG(D_STREAM, "Halting stream"); + + return 0; +} + +static int st6422_get_brightness(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[BRIGHTNESS_IDX]; + + PDEBUG(D_V4L2, "Read brightness %d", *val); + + return 0; +} + +static int st6422_set_brightness(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + sensor_settings[BRIGHTNESS_IDX] = val; + + if (!gspca_dev->streaming) + return 0; + + /* val goes from 0 -> 31 */ + PDEBUG(D_V4L2, "Set brightness to %d", val); + err = stv06xx_write_bridge(sd, 0x1432, val); + if (err < 0) + return err; + + /* commit settings */ + err = stv06xx_write_bridge(sd, 0x143f, 0x01); + return (err < 0) ? err : 0; +} + +static int st6422_get_contrast(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[CONTRAST_IDX]; + + PDEBUG(D_V4L2, "Read contrast %d", *val); + + return 0; +} + +static int st6422_set_contrast(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + sensor_settings[CONTRAST_IDX] = val; + + if (!gspca_dev->streaming) + return 0; + + /* Val goes from 0 -> 15 */ + PDEBUG(D_V4L2, "Set contrast to %d\n", val); + err = stv06xx_write_bridge(sd, 0x143a, 0xf0 | val); + if (err < 0) + return err; + + /* commit settings */ + err = stv06xx_write_bridge(sd, 0x143f, 0x01); + return (err < 0) ? err : 0; +} + +static int st6422_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[GAIN_IDX]; + + PDEBUG(D_V4L2, "Read gain %d", *val); + + return 0; +} + +static int st6422_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + sensor_settings[GAIN_IDX] = val; + + if (!gspca_dev->streaming) + return 0; + + PDEBUG(D_V4L2, "Set gain to %d", val); + + /* Set red, green, blue, gain */ + err = stv06xx_write_bridge(sd, 0x0509, val); + if (err < 0) + return err; + + err = stv06xx_write_bridge(sd, 0x050a, val); + if (err < 0) + return err; + + err = stv06xx_write_bridge(sd, 0x050b, val); + if (err < 0) + return err; + + /* 2 mystery writes */ + err = stv06xx_write_bridge(sd, 0x050c, 0x2a); + if (err < 0) + return err; + + err = stv06xx_write_bridge(sd, 0x050d, 0x01); + if (err < 0) + return err; + + /* commit settings */ + err = stv06xx_write_bridge(sd, 0x143f, 0x01); + return (err < 0) ? err : 0; +} + +static int st6422_get_exposure(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[EXPOSURE_IDX]; + + PDEBUG(D_V4L2, "Read exposure %d", *val); + + return 0; +} + +static int st6422_set_exposure(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + sensor_settings[EXPOSURE_IDX] = val; + + if (!gspca_dev->streaming) + return 0; + + PDEBUG(D_V4L2, "Set exposure to %d\n", val); + err = stv06xx_write_bridge(sd, 0x143d, val & 0xff); + if (err < 0) + return err; + + err = stv06xx_write_bridge(sd, 0x143e, val >> 8); + if (err < 0) + return err; + + /* commit settings */ + err = stv06xx_write_bridge(sd, 0x143f, 0x01); + return (err < 0) ? err : 0; +} diff --git a/linux/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h b/linux/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h new file mode 100644 index 000000000..b2d45fe50 --- /dev/null +++ b/linux/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h @@ -0,0 +1,59 @@ +/* + * Support for the sensor part which is integrated (I think) into the + * st6422 stv06xx alike bridge, as its integrated there are no i2c writes + * but instead direct bridge writes. + * + * Copyright (c) 2009 Hans de Goede <hdegoede@redhat.com> + * + * Strongly based on qc-usb-messenger, which is: + * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher + * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland + * Copyright (c) 2002, 2003 Tuukka Toivonen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef STV06XX_ST6422_H_ +#define STV06XX_ST6422_H_ + +#include "stv06xx_sensor.h" + +static int st6422_probe(struct sd *sd); +static int st6422_start(struct sd *sd); +static int st6422_init(struct sd *sd); +static int st6422_stop(struct sd *sd); +static void st6422_disconnect(struct sd *sd); + +/* V4L2 controls supported by the driver */ +static int st6422_get_brightness(struct gspca_dev *gspca_dev, __s32 *val); +static int st6422_set_brightness(struct gspca_dev *gspca_dev, __s32 val); +static int st6422_get_contrast(struct gspca_dev *gspca_dev, __s32 *val); +static int st6422_set_contrast(struct gspca_dev *gspca_dev, __s32 val); +static int st6422_get_gain(struct gspca_dev *gspca_dev, __s32 *val); +static int st6422_set_gain(struct gspca_dev *gspca_dev, __s32 val); +static int st6422_get_exposure(struct gspca_dev *gspca_dev, __s32 *val); +static int st6422_set_exposure(struct gspca_dev *gspca_dev, __s32 val); + +const struct stv06xx_sensor stv06xx_sensor_st6422 = { + .name = "ST6422", + .init = st6422_init, + .probe = st6422_probe, + .start = st6422_start, + .stop = st6422_stop, + .disconnect = st6422_disconnect, +}; + +#endif diff --git a/linux/drivers/media/video/gspca/sunplus.c b/linux/drivers/media/video/gspca/sunplus.c index 16bc65dc7..270b86f24 100644 --- a/linux/drivers/media/video/gspca/sunplus.c +++ b/linux/drivers/media/video/gspca/sunplus.c @@ -52,6 +52,7 @@ struct sd { #define LogitechClickSmart420 2 #define LogitechClickSmart820 3 #define MegapixV4 4 +#define MegaImageVI 5 u8 *jpeg_hdr; }; @@ -875,7 +876,10 @@ static int sd_config(struct gspca_dev *gspca_dev, break; case BRIDGE_SPCA533: cam->cam_mode = custom_mode; - cam->nmodes = sizeof custom_mode / sizeof custom_mode[0]; + if (sd->subtype == MegaImageVI) /* 320x240 only */ + cam->nmodes = ARRAY_SIZE(custom_mode) - 1; + else + cam->nmodes = ARRAY_SIZE(custom_mode); break; case BRIDGE_SPCA504C: cam->cam_mode = vga_mode2; @@ -1004,6 +1008,8 @@ static int sd_start(struct gspca_dev *gspca_dev) /* create the JPEG header */ sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); + if (!sd->jpeg_hdr) + return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x22); /* JPEG 411 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); @@ -1017,7 +1023,8 @@ static int sd_start(struct gspca_dev *gspca_dev) /* case BRIDGE_SPCA533: */ /* case BRIDGE_SPCA536: */ if (sd->subtype == MegapixV4 || - sd->subtype == LogitechClickSmart820) { + sd->subtype == LogitechClickSmart820 || + sd->subtype == MegaImageVI) { reg_w(gspca_dev, 0xf0, 0, 0, 0); spca504B_WaitCmdStatus(gspca_dev); reg_r(gspca_dev, 0xf0, 4, 0); @@ -1413,6 +1420,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x04fc, 0x5360), BS(SPCA536, 0)}, {USB_DEVICE(0x04fc, 0xffff), BS(SPCA504B, 0)}, {USB_DEVICE(0x052b, 0x1513), BS(SPCA533, MegapixV4)}, + {USB_DEVICE(0x052b, 0x1803), BS(SPCA533, MegaImageVI)}, {USB_DEVICE(0x0546, 0x3155), BS(SPCA533, 0)}, {USB_DEVICE(0x0546, 0x3191), BS(SPCA504B, 0)}, {USB_DEVICE(0x0546, 0x3273), BS(SPCA504B, 0)}, diff --git a/linux/drivers/media/video/gspca/t613.c b/linux/drivers/media/video/gspca/t613.c index 1b58b65fb..10530b465 100644 --- a/linux/drivers/media/video/gspca/t613.c +++ b/linux/drivers/media/video/gspca/t613.c @@ -264,6 +264,10 @@ static const struct v4l2_pix_format vga_mode_t16[] = { /* sensor specific data */ struct additional_sensor_data { + const u8 n3[6]; + const u8 *n4, n4sz; + const u8 reg80, reg8e; + const u8 nset8[6]; const u8 data1[10]; const u8 data2[9]; const u8 data3[9]; @@ -272,28 +276,98 @@ struct additional_sensor_data { const u8 stream[4]; }; +static const u8 n4_om6802[] = { + 0x09, 0x01, 0x12, 0x04, 0x66, 0x8a, 0x80, 0x3c, + 0x81, 0x22, 0x84, 0x50, 0x8a, 0x78, 0x8b, 0x68, + 0x8c, 0x88, 0x8e, 0x33, 0x8f, 0x24, 0xaa, 0xb1, + 0xa2, 0x60, 0xa5, 0x30, 0xa6, 0x3a, 0xa8, 0xe8, + 0xae, 0x05, 0xb1, 0x00, 0xbb, 0x04, 0xbc, 0x48, + 0xbe, 0x36, 0xc6, 0x88, 0xe9, 0x00, 0xc5, 0xc0, + 0x65, 0x0a, 0xbb, 0x86, 0xaf, 0x58, 0xb0, 0x68, + 0x87, 0x40, 0x89, 0x2b, 0x8d, 0xff, 0x83, 0x40, + 0xac, 0x84, 0xad, 0x86, 0xaf, 0x46 +}; +static const u8 n4_other[] = { + 0x66, 0x00, 0x7f, 0x00, 0x80, 0xac, 0x81, 0x69, + 0x84, 0x40, 0x85, 0x70, 0x86, 0x20, 0x8a, 0x68, + 0x8b, 0x58, 0x8c, 0x88, 0x8d, 0xff, 0x8e, 0xb8, + 0x8f, 0x28, 0xa2, 0x60, 0xa5, 0x40, 0xa8, 0xa8, + 0xac, 0x84, 0xad, 0x84, 0xae, 0x24, 0xaf, 0x56, + 0xb0, 0x68, 0xb1, 0x00, 0xb2, 0x88, 0xbb, 0xc5, + 0xbc, 0x4a, 0xbe, 0x36, 0xc2, 0x88, 0xc5, 0xc0, + 0xc6, 0xda, 0xe9, 0x26, 0xeb, 0x00 +}; +static const u8 n4_tas5130a[] = { + 0x80, 0x3c, 0x81, 0x68, 0x83, 0xa0, 0x84, 0x20, + 0x8a, 0x68, 0x8b, 0x58, 0x8c, 0x88, 0x8e, 0xb4, + 0x8f, 0x24, 0xa1, 0xb1, 0xa2, 0x30, 0xa5, 0x10, + 0xa6, 0x4a, 0xae, 0x03, 0xb1, 0x44, 0xb2, 0x08, + 0xb7, 0x06, 0xb9, 0xe7, 0xbb, 0xc4, 0xbc, 0x4a, + 0xbe, 0x36, 0xbf, 0xff, 0xc2, 0x88, 0xc5, 0xc8, + 0xc6, 0xda +}; + static const struct additional_sensor_data sensor_data[] = { - { /* OM6802 */ + { /* 0: OM6802 */ + .n3 = + {0x61, 0x68, 0x65, 0x0a, 0x60, 0x04}, + .n4 = n4_om6802, + .n4sz = sizeof n4_om6802, + .reg80 = 0x3c, + .reg8e = 0x33, + .nset8 = {0xa8, 0xf0, 0xc6, 0x88, 0xc0, 0x00}, .data1 = +#if 1 {0xc2, 0x28, 0x0f, 0x22, 0xcd, 0x27, 0x2c, 0x06, 0xb3, 0xfc}, +#else + {0xbb, 0x28, 0x10, 0x10, 0xbb, 0x28, 0x1e, 0x27, + 0xc8, 0xfc}, +#endif .data2 = +#if 1 + {0x80, 0xff, 0xff, 0x80, 0xff, 0xff, 0x80, 0xff, + 0xff}, +#else + {0x60, 0xa8, 0xe0, 0x60, 0xa8, 0xe0, 0x60, 0xa8, + 0xe0}, +#endif + .data3 = +#if 1 {0x80, 0xff, 0xff, 0x80, 0xff, 0xff, 0x80, 0xff, 0xff}, +#else + {0x60, 0xa8, 0xe0, 0x60, 0xa8, 0xe0, 0x60, 0xa8, + 0xe0}, +#endif .data4 = /*Freq (50/60Hz). Splitted for test purpose */ +#if 0 + {0x66, 0x8a, 0xa8, 0xe8}, +#else {0x66, 0xca, 0xa8, 0xf0}, +#endif .data5 = /* this could be removed later */ {0x0c, 0x03, 0xab, 0x13, 0x81, 0x23}, .stream = {0x0b, 0x04, 0x0a, 0x78}, }, - { /* OTHER */ + { /* 1: OTHER */ + .n3 = + {0x61, 0xc2, 0x65, 0x88, 0x60, 0x00}, + .n4 = n4_other, + .n4sz = sizeof n4_other, + .reg80 = 0xac, + .reg8e = 0xb8, + .nset8 = {0xa8, 0xa8, 0xc6, 0xda, 0xc0, 0x00}, .data1 = {0xc1, 0x48, 0x04, 0x1b, 0xca, 0x2e, 0x33, 0x3a, 0xe8, 0xfc}, .data2 = {0x4e, 0x9c, 0xec, 0x40, 0x80, 0xc0, 0x48, 0x96, 0xd9}, + .data3 = + {0x4e, 0x9c, 0xec, 0x40, 0x80, 0xc0, 0x48, 0x96, + 0xd9}, .data4 = {0x66, 0x00, 0xa8, 0xa8}, .data5 = @@ -301,17 +375,50 @@ static const struct additional_sensor_data sensor_data[] = { .stream = {0x0b, 0x04, 0x0a, 0x00}, }, - { /* TAS5130A */ + { /* 2: TAS5130A */ + .n3 = + {0x61, 0xc2, 0x65, 0x0d, 0x60, 0x08}, + .n4 = n4_tas5130a, + .n4sz = sizeof n4_tas5130a, + .reg80 = 0x3c, + .reg8e = 0xb4, + .nset8 = {0xa8, 0xf0, 0xc6, 0xda, 0xc0, 0x00}, .data1 = +#if 1 {0xbb, 0x28, 0x10, 0x10, 0xbb, 0x28, 0x1e, 0x27, 0xc8, 0xfc}, +#else + {0xf3, 0xa1, 0x0a, 0x2f, 0xbb, 0x2e, 0x21, 0x68, + 0xea, 0xbf}, +#endif .data2 = +#if 1 {0x60, 0xa8, 0xe0, 0x60, 0xa8, 0xe0, 0x60, 0xa8, 0xe0}, +#else + {0x40, 0x80, 0xc0, 0x40, 0x80, 0xc0, 0x4d, 0x97, + 0xe4}, +#endif + .data3 = +#if 1 + {0x60, 0xa8, 0xe0, 0x60, 0xa8, 0xe0, 0x60, 0xa8, + 0xe0}, +#else + {0x40, 0x80, 0xc0, 0x41, 0x81, 0xc3, 0x5c, 0x99, + 0xe0}, +#endif .data4 = /* Freq (50/60Hz). Splitted for test purpose */ +#if 1 {0x66, 0x00, 0xa8, 0xe8}, +#else + {0x66, 0x40, 0xa8, 0xf0}, +#endif .data5 = +#if 0 + {0x0c, 0x03, 0xab, 0x08, 0x81, 0x68}, +#else {0x0c, 0x03, 0xab, 0x10, 0x81, 0x20}, +#endif .stream = {0x0b, 0x04, 0x0a, 0x40}, }, @@ -364,7 +471,7 @@ static const u8 gamma_table[GAMMA_MAX][17] = { {0x00, 0x18, 0x2b, 0x44, 0x60, 0x70, 0x80, 0x8e, /* 10 */ 0x9c, 0xaa, 0xb7, 0xc4, 0xd0, 0xd8, 0xe2, 0xf0, 0xff}, - {0x00, 0x1a, 0x34, 0x52, 0x66, 0x7e, 0x8D, 0x9B, /* 11 */ + {0x00, 0x1a, 0x34, 0x52, 0x66, 0x7e, 0x8d, 0x9b, /* 11 */ 0xa8, 0xb4, 0xc0, 0xcb, 0xd6, 0xe1, 0xeb, 0xf5, 0xff}, {0x00, 0x3f, 0x5a, 0x6e, 0x7f, 0x8e, 0x9c, 0xa8, /* 12 */ @@ -385,8 +492,6 @@ static const u8 tas5130a_sensor_init[][8] = { {0x62, 0x08, 0x63, 0x70, 0x64, 0x1d, 0x60, 0x09}, {0x62, 0x20, 0x63, 0x01, 0x64, 0x02, 0x60, 0x09}, {0x62, 0x07, 0x63, 0x03, 0x64, 0x00, 0x60, 0x09}, - {0x62, 0x07, 0x63, 0x03, 0x64, 0x00, 0x60, 0x09}, - {}, }; static u8 sensor_reset[] = {0x61, 0x68, 0x62, 0xff, 0x60, 0x07}; @@ -633,10 +738,10 @@ static int sd_init(struct gspca_dev *gspca_dev) * but wont hurt anyway, and can help someone with similar webcam * to see the initial parameters.*/ struct sd *sd = (struct sd *) gspca_dev; + const struct additional_sensor_data *sensor; int i; u16 sensor_id; u8 test_byte = 0; - u16 reg80, reg8e; static const u8 read_indexs[] = { 0x0a, 0x0b, 0x66, 0x80, 0x81, 0x8e, 0x8f, 0xa5, @@ -645,37 +750,6 @@ static int sd_init(struct gspca_dev *gspca_dev) {0x08, 0x03, 0x09, 0x03, 0x12, 0x04}; static const u8 n2[] = {0x08, 0x00}; - static const u8 n3[6] = - {0x61, 0x68, 0x65, 0x0a, 0x60, 0x04}; - static const u8 n3_other[6] = - {0x61, 0xc2, 0x65, 0x88, 0x60, 0x00}; - static const u8 n4[] = - {0x09, 0x01, 0x12, 0x04, 0x66, 0x8a, 0x80, 0x3c, - 0x81, 0x22, 0x84, 0x50, 0x8a, 0x78, 0x8b, 0x68, - 0x8c, 0x88, 0x8e, 0x33, 0x8f, 0x24, 0xaa, 0xb1, - 0xa2, 0x60, 0xa5, 0x30, 0xa6, 0x3a, 0xa8, 0xe8, - 0xae, 0x05, 0xb1, 0x00, 0xbb, 0x04, 0xbc, 0x48, - 0xbe, 0x36, 0xc6, 0x88, 0xe9, 0x00, 0xc5, 0xc0, - 0x65, 0x0a, 0xbb, 0x86, 0xaf, 0x58, 0xb0, 0x68, - 0x87, 0x40, 0x89, 0x2b, 0x8d, 0xff, 0x83, 0x40, - 0xac, 0x84, 0xad, 0x86, 0xaf, 0x46}; - static const u8 n4_other[] = - {0x66, 0x00, 0x7f, 0x00, 0x80, 0xac, 0x81, 0x69, - 0x84, 0x40, 0x85, 0x70, 0x86, 0x20, 0x8a, 0x68, - 0x8b, 0x58, 0x8c, 0x88, 0x8d, 0xff, 0x8e, 0xb8, - 0x8f, 0x28, 0xa2, 0x60, 0xa5, 0x40, 0xa8, 0xa8, - 0xac, 0x84, 0xad, 0x84, 0xae, 0x24, 0xaf, 0x56, - 0xb0, 0x68, 0xb1, 0x00, 0xb2, 0x88, 0xbb, 0xc5, - 0xbc, 0x4a, 0xbe, 0x36, 0xc2, 0x88, 0xc5, 0xc0, - 0xc6, 0xda, 0xe9, 0x26, 0xeb, 0x00}; - static const u8 nset8[6] = - { 0xa8, 0xf0, 0xc6, 0x88, 0xc0, 0x00 }; - static const u8 nset8_other[6] = - { 0xa8, 0xa8, 0xc6, 0xda, 0xc0, 0x00 }; - static const u8 nset9[4] = - { 0x0b, 0x04, 0x0a, 0x78 }; - static const u8 nset9_other[4] = - { 0x0b, 0x04, 0x0a, 0x00 }; sensor_id = (reg_r(gspca_dev, 0x06) << 8) | reg_r(gspca_dev, 0x07); @@ -709,8 +783,7 @@ static int sd_init(struct gspca_dev *gspca_dev) } if (i < 0) { err("Bad sensor reset %02x", test_byte); -/* return -EIO; */ -/*fixme: test - continue */ + return -EIO; } reg_w_buf(gspca_dev, n2, sizeof n2); } @@ -723,31 +796,17 @@ static int sd_init(struct gspca_dev *gspca_dev) i++; } - if (sd->sensor != SENSOR_OTHER) { - reg_w_buf(gspca_dev, n3, sizeof n3); - reg_w_buf(gspca_dev, n4, sizeof n4); - reg_r(gspca_dev, 0x0080); - reg_w(gspca_dev, 0x2c80); - reg80 = 0x3880; - reg8e = 0x338e; - } else { - reg_w_buf(gspca_dev, n3_other, sizeof n3_other); - reg_w_buf(gspca_dev, n4_other, sizeof n4_other); - sd->gamma = 5; - reg80 = 0xac80; - reg8e = 0xb88e; - } + sensor = &sensor_data[sd->sensor]; + reg_w_buf(gspca_dev, sensor->n3, sizeof sensor->n3); + reg_w_buf(gspca_dev, sensor->n4, sensor->n4sz); - reg_w_ixbuf(gspca_dev, 0xd0, sensor_data[sd->sensor].data1, - sizeof sensor_data[sd->sensor].data1); - reg_w_ixbuf(gspca_dev, 0xc7, sensor_data[sd->sensor].data2, - sizeof sensor_data[sd->sensor].data2); - reg_w_ixbuf(gspca_dev, 0xe0, sensor_data[sd->sensor].data2, - sizeof sensor_data[sd->sensor].data2); + reg_w_ixbuf(gspca_dev, 0xd0, sensor->data1, sizeof sensor->data1); + reg_w_ixbuf(gspca_dev, 0xc7, sensor->data2, sizeof sensor->data2); + reg_w_ixbuf(gspca_dev, 0xe0, sensor->data3, sizeof sensor->data3); - reg_w(gspca_dev, reg80); - reg_w(gspca_dev, reg80); - reg_w(gspca_dev, reg8e); + reg_w(gspca_dev, (sensor->reg80 << 8) + 0x80); + reg_w(gspca_dev, (sensor->reg80 << 8) + 0x80); + reg_w(gspca_dev, (sensor->reg8e << 8) + 0x8e); setbrightness(gspca_dev); setcontrast(gspca_dev); @@ -760,25 +819,14 @@ static int sd_init(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x2088); reg_w(gspca_dev, 0x2089); - reg_w_buf(gspca_dev, sensor_data[sd->sensor].data4, - sizeof sensor_data[sd->sensor].data4); - reg_w_buf(gspca_dev, sensor_data[sd->sensor].data5, - sizeof sensor_data[sd->sensor].data5); - if (sd->sensor != SENSOR_OTHER) { - reg_w_buf(gspca_dev, nset8, sizeof nset8); - reg_w_buf(gspca_dev, nset9, sizeof nset9); - reg_w(gspca_dev, 0x2880); - } else { - reg_w_buf(gspca_dev, nset8_other, sizeof nset8_other); - reg_w_buf(gspca_dev, nset9_other, sizeof nset9_other); - } + reg_w_buf(gspca_dev, sensor->data4, sizeof sensor->data4); + reg_w_buf(gspca_dev, sensor->data5, sizeof sensor->data5); + reg_w_buf(gspca_dev, sensor->nset8, sizeof sensor->nset8); + reg_w_buf(gspca_dev, sensor->stream, sizeof sensor->stream); - reg_w_ixbuf(gspca_dev, 0xd0, sensor_data[sd->sensor].data1, - sizeof sensor_data[sd->sensor].data1); - reg_w_ixbuf(gspca_dev, 0xc7, sensor_data[sd->sensor].data2, - sizeof sensor_data[sd->sensor].data2); - reg_w_ixbuf(gspca_dev, 0xe0, sensor_data[sd->sensor].data2, - sizeof sensor_data[sd->sensor].data2); + reg_w_ixbuf(gspca_dev, 0xd0, sensor->data1, sizeof sensor->data1); + reg_w_ixbuf(gspca_dev, 0xc7, sensor->data2, sizeof sensor->data2); + reg_w_ixbuf(gspca_dev, 0xe0, sensor->data3, sizeof sensor->data3); return 0; } @@ -828,7 +876,6 @@ static void setlightfreq(struct gspca_dev *gspca_dev) * i added some module parameters for test with some users */ static void poll_sensor(struct gspca_dev *gspca_dev) { - struct sd *sd = (struct sd *) gspca_dev; static const u8 poll1[] = {0x67, 0x05, 0x68, 0x81, 0x69, 0x80, 0x6a, 0x82, 0x6b, 0x68, 0x6c, 0x69, 0x72, 0xd9, 0x73, 0x34, @@ -844,24 +891,23 @@ static void poll_sensor(struct gspca_dev *gspca_dev) 0xa1, 0xb1, 0xda, 0x6b, 0xdb, 0x98, 0xdf, 0x0c, 0xc2, 0x80, 0xc3, 0x10}; - if (sd->sensor == SENSOR_OM6802) { - PDEBUG(D_STREAM, "[Sensor requires polling]"); - reg_w_buf(gspca_dev, poll1, sizeof poll1); - reg_w_buf(gspca_dev, poll2, sizeof poll2); - reg_w_buf(gspca_dev, poll3, sizeof poll3); - reg_w_buf(gspca_dev, poll4, sizeof poll4); - } + PDEBUG(D_STREAM, "[Sensor requires polling]"); + reg_w_buf(gspca_dev, poll1, sizeof poll1); + reg_w_buf(gspca_dev, poll2, sizeof poll2); + reg_w_buf(gspca_dev, poll3, sizeof poll3); + reg_w_buf(gspca_dev, poll4, sizeof poll4); } static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + const struct additional_sensor_data *sensor; int i, mode; u8 t2[] = { 0x07, 0x00, 0x0d, 0x60, 0x0e, 0x80 }; static const u8 t3[] = { 0x07, 0x00, 0x88, 0x02, 0x06, 0x00, 0xe7, 0x01 }; - mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode]. priv; + mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; switch (mode) { case 0: /* 640x480 (0x00) */ break; @@ -889,35 +935,39 @@ static int sd_start(struct gspca_dev *gspca_dev) default: /* case SENSOR_TAS5130A: */ i = 0; - while (tas5130a_sensor_init[i][0] != 0) { + for (;;) { reg_w_buf(gspca_dev, tas5130a_sensor_init[i], sizeof tas5130a_sensor_init[0]); + if (i >= ARRAY_SIZE(tas5130a_sensor_init) - 1) + break; i++; } reg_w(gspca_dev, 0x3c80); /* just in case and to keep sync with logs (for mine) */ - reg_w_buf(gspca_dev, tas5130a_sensor_init[3], + reg_w_buf(gspca_dev, tas5130a_sensor_init[i], sizeof tas5130a_sensor_init[0]); reg_w(gspca_dev, 0x3c80); break; } - reg_w_buf(gspca_dev, sensor_data[sd->sensor].data4, - sizeof sensor_data[sd->sensor].data4); + sensor = &sensor_data[sd->sensor]; + reg_w_buf(gspca_dev, sensor->data4, sizeof sensor->data4); reg_r(gspca_dev, 0x0012); reg_w_buf(gspca_dev, t2, sizeof t2); reg_w_ixbuf(gspca_dev, 0xb3, t3, sizeof t3); reg_w(gspca_dev, 0x0013); msleep(15); - reg_w_buf(gspca_dev, sensor_data[sd->sensor].stream, - sizeof sensor_data[sd->sensor].stream); - poll_sensor(gspca_dev); + reg_w_buf(gspca_dev, sensor->stream, sizeof sensor->stream); + reg_w_buf(gspca_dev, sensor->stream, sizeof sensor->stream); + + if (sd->sensor == SENSOR_OM6802) + poll_sensor(gspca_dev); +#if 0 /* restart on each start, just in case, sometimes regs goes wrong * when using controls from app */ setbrightness(gspca_dev); setcontrast(gspca_dev); setcolors(gspca_dev); -#if 0 seteffect(gspca_dev); setflip(gspca_dev); #endif @@ -930,10 +980,9 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_w_buf(gspca_dev, sensor_data[sd->sensor].stream, sizeof sensor_data[sd->sensor].stream); - msleep(20); reg_w_buf(gspca_dev, sensor_data[sd->sensor].stream, sizeof sensor_data[sd->sensor].stream); - if (sd->sensor != SENSOR_OTHER) { + if (sd->sensor == SENSOR_OM6802) { msleep(20); reg_w(gspca_dev, 0x0309); } diff --git a/linux/drivers/media/video/gspca/vc032x.c b/linux/drivers/media/video/gspca/vc032x.c index a29c85cac..d8d2c5dc7 100644 --- a/linux/drivers/media/video/gspca/vc032x.c +++ b/linux/drivers/media/video/gspca/vc032x.c @@ -52,6 +52,7 @@ struct sd { #define SENSOR_OV7670 6 #define SENSOR_PO1200 7 #define SENSOR_PO3130NC 8 + u8 ninput; /* != 0 when 2 sensors - SamsungQ1 */ }; /* V4L2 controls supported by the driver */ @@ -2784,11 +2785,22 @@ static u16 read_sensor_register(struct gspca_dev *gspca_dev, static int vc032x_probe_sensor(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; struct usb_device *dev = gspca_dev->dev; int i; u16 value; const struct sensor_info *ptsensor_info; +/*fixme: should also check the other sensor (back mi1320_soc, front mc501cb)*/ + if (sd->ninput != 0) { + reg_w(dev, 0xa0, 0x01, 0xb301); +#if 1 + reg_w(dev, 0x89, 0xf0ff, 0xffff); /* select the back sensor */ +#else + reg_w(dev, 0x89, 0xf3ff, 0xffff); /* select the front sensor */ +#endif + } + reg_r(gspca_dev, 0xa1, 0xbfcf, 1); PDEBUG(D_PROBE, "check sensor header %02x", gspca_dev->usb_buf[0]); for (i = 0; i < ARRAY_SIZE(sensor_info_data); i++) { @@ -2918,7 +2930,8 @@ static int sd_config(struct gspca_dev *gspca_dev, }; cam = &gspca_dev->cam; - sd->bridge = id->driver_info; + sd->bridge = id->driver_info >> 8; + sd->ninput = id->driver_info & 0xff; #if 0 vc0321_reset(gspca_dev); #endif @@ -3095,6 +3108,13 @@ static int sd_start(struct gspca_dev *gspca_dev) #endif }; +/*fixme: back sensor only*/ + if (sd->ninput != 0) { + reg_w(gspca_dev->dev, 0x89, 0xf0ff, 0xffff); + reg_w(gspca_dev->dev, 0xa9, 0x8348, 0x000e); + reg_w(gspca_dev->dev, 0xa9, 0x0000, 0x001a); + } + /* Assume start use the good resolution from gspca_dev->mode */ if (sd->bridge == BRIDGE_VC0321) { reg_w(gspca_dev->dev, 0xa0, 0xff, 0xbfec); @@ -3366,19 +3386,23 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ +#define BF(bridge, flags) \ + .driver_info = (BRIDGE_ ## bridge << 8) \ + | (flags) static const __devinitdata struct usb_device_id device_table[] = { - {USB_DEVICE(0x041e, 0x405b), .driver_info = BRIDGE_VC0323}, - {USB_DEVICE(0x046d, 0x0892), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x046d, 0x0896), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x046d, 0x0897), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x0ac8, 0x0321), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x0ac8, 0x0323), .driver_info = BRIDGE_VC0323}, - {USB_DEVICE(0x0ac8, 0x0328), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x0ac8, 0xc001), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x0ac8, 0xc002), .driver_info = BRIDGE_VC0321}, - {USB_DEVICE(0x15b8, 0x6001), .driver_info = BRIDGE_VC0323}, - {USB_DEVICE(0x15b8, 0x6002), .driver_info = BRIDGE_VC0323}, - {USB_DEVICE(0x17ef, 0x4802), .driver_info = BRIDGE_VC0323}, + {USB_DEVICE(0x041e, 0x405b), BF(VC0323, 0)}, + {USB_DEVICE(0x046d, 0x0892), BF(VC0321, 0)}, + {USB_DEVICE(0x046d, 0x0896), BF(VC0321, 0)}, + {USB_DEVICE(0x046d, 0x0897), BF(VC0321, 0)}, + {USB_DEVICE(0x0ac8, 0x0321), BF(VC0321, 0)}, + {USB_DEVICE(0x0ac8, 0x0323), BF(VC0323, 0)}, + {USB_DEVICE(0x0ac8, 0x0328), BF(VC0321, 0)}, + {USB_DEVICE(0x0ac8, 0xc001), BF(VC0321, 0)}, + {USB_DEVICE(0x0ac8, 0xc002), BF(VC0321, 0)}, + {USB_DEVICE(0x0ac8, 0xc301), BF(VC0323, 1)}, + {USB_DEVICE(0x15b8, 0x6001), BF(VC0323, 0)}, + {USB_DEVICE(0x15b8, 0x6002), BF(VC0323, 0)}, + {USB_DEVICE(0x17ef, 0x4802), BF(VC0323, 0)}, {} }; MODULE_DEVICE_TABLE(usb, device_table); diff --git a/linux/drivers/media/video/gspca/zc3xx.c b/linux/drivers/media/video/gspca/zc3xx.c index 2855ebf90..2a9480138 100644 --- a/linux/drivers/media/video/gspca/zc3xx.c +++ b/linux/drivers/media/video/gspca/zc3xx.c @@ -7272,6 +7272,8 @@ static int sd_start(struct gspca_dev *gspca_dev) /* create the JPEG header */ sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL); + if (!sd->jpeg_hdr) + return -ENOMEM; jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x21); /* JPEG 422 */ jpeg_set_qual(sd->jpeg_hdr, sd->quality); diff --git a/linux/drivers/media/video/hdpvr/hdpvr-video.c b/linux/drivers/media/video/hdpvr/hdpvr-video.c index 3e6ffee8d..ccd47f57f 100644 --- a/linux/drivers/media/video/hdpvr/hdpvr-video.c +++ b/linux/drivers/media/video/hdpvr/hdpvr-video.c @@ -181,7 +181,7 @@ static int hdpvr_submit_buffers(struct hdpvr_device *dev) buff_list); if (buf->status != BUFSTAT_AVAILABLE) { v4l2_err(&dev->v4l2_dev, - "buffer not marked as availbale\n"); + "buffer not marked as available\n"); ret = -EFAULT; goto err; } diff --git a/linux/drivers/media/video/ivtv/ivtv-cards.c b/linux/drivers/media/video/ivtv/ivtv-cards.c index 2883c8780..40c29032f 100644 --- a/linux/drivers/media/video/ivtv/ivtv-cards.c +++ b/linux/drivers/media/video/ivtv/ivtv-cards.c @@ -1016,6 +1016,50 @@ static const struct ivtv_card ivtv_card_aver_pvr150 = { /* ------------------------------------------------------------------------- */ +/* AVerMedia UltraTV 1500 MCE (newer non-cx88 version, M113 variant) card */ + +static const struct ivtv_card_pci_info ivtv_pci_aver_ultra1500mce[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_AVERMEDIA, 0xc019 }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_aver_ultra1500mce = { + .type = IVTV_CARD_AVER_ULTRA1500MCE, + .name = "AVerMedia UltraTV 1500 MCE / AVerTV M113", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_CX25840, + .hw_audio = IVTV_HW_CX25840, + .hw_audio_ctrl = IVTV_HW_CX25840, + .hw_muxer = IVTV_HW_GPIO, + .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER | + IVTV_HW_WM8739 | IVTV_HW_GPIO, + .video_inputs = { + { IVTV_CARD_INPUT_VID_TUNER, 0, CX25840_COMPOSITE2 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, + CX25840_SVIDEO_LUMA3 | CX25840_SVIDEO_CHROMA4 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, CX25840_COMPOSITE1 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5, 0 }, + { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL, 1 }, + }, + .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO_SERIAL, 2 }, + /* The 74HC4502 Dual 4:1 multiplexer is controlled by 2 GPIO lines */ + .gpio_init = { .direction = 0xc000, .initial_value = 0 }, + .gpio_audio_input = { .mask = 0xc000, + .tuner = 0x0000, + .linein = 0x4000, + .radio = 0x8000 }, + .tuners = { + /* The UltraTV 1500 MCE has a Philips FM1236 MK5 TV/FM tuner */ + { .std = V4L2_STD_MN, .tuner = TUNER_PHILIPS_FM1236_MK3 }, + }, + .pci_list = ivtv_pci_aver_ultra1500mce, + .i2c = &ivtv_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + /* AVerMedia EZMaker PCI Deluxe card */ static const struct ivtv_card_pci_info ivtv_pci_aver_ezmaker[] = { @@ -1180,6 +1224,7 @@ static const struct ivtv_card *ivtv_card_list[] = { &ivtv_card_aver_ezmaker, &ivtv_card_aver_m104, &ivtv_card_buffalo, + &ivtv_card_aver_ultra1500mce, /* Variations of standard cards but with the same PCI IDs. These cards must come last in this list. */ diff --git a/linux/drivers/media/video/ivtv/ivtv-cards.h b/linux/drivers/media/video/ivtv/ivtv-cards.h index 0b8fe85fb..e99a0a255 100644 --- a/linux/drivers/media/video/ivtv/ivtv-cards.h +++ b/linux/drivers/media/video/ivtv/ivtv-cards.h @@ -50,7 +50,8 @@ #define IVTV_CARD_AVER_EZMAKER 23 /* AVerMedia EZMaker PCI Deluxe */ #define IVTV_CARD_AVER_M104 24 /* AverMedia M104 miniPCI card */ #define IVTV_CARD_BUFFALO_MV5L 25 /* Buffalo PC-MV5L/PCI card */ -#define IVTV_CARD_LAST 25 +#define IVTV_CARD_AVER_ULTRA1500MCE 26 /* AVerMedia UltraTV 1500 MCE */ +#define IVTV_CARD_LAST 26 /* Variants of existing cards but with the same PCI IDs. The driver detects these based on other device information. diff --git a/linux/drivers/media/video/ivtv/ivtv-controls.c b/linux/drivers/media/video/ivtv/ivtv-controls.c index 84995bcf4..a3b77ed3f 100644 --- a/linux/drivers/media/video/ivtv/ivtv-controls.c +++ b/linux/drivers/media/video/ivtv/ivtv-controls.c @@ -60,6 +60,8 @@ int ivtv_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl) switch (qctrl->id) { /* Standard V4L2 controls */ + case V4L2_CID_USER_CLASS: + return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0); case V4L2_CID_BRIGHTNESS: case V4L2_CID_HUE: case V4L2_CID_SATURATION: diff --git a/linux/drivers/media/video/ivtv/ivtv-driver.c b/linux/drivers/media/video/ivtv/ivtv-driver.c index 9f91838d7..fbb8586c5 100644 --- a/linux/drivers/media/video/ivtv/ivtv-driver.c +++ b/linux/drivers/media/video/ivtv/ivtv-driver.c @@ -186,6 +186,7 @@ MODULE_PARM_DESC(cardtype, "\t\t\t24 = AverMedia EZMaker PCI Deluxe\n" "\t\t\t25 = AverMedia M104 (not yet working)\n" "\t\t\t26 = Buffalo PC-MV5L/PCI\n" + "\t\t\t27 = AVerMedia UltraTV 1500 MCE\n" "\t\t\t 0 = Autodetect (default)\n" "\t\t\t-1 = Ignore this card\n\t\t"); MODULE_PARM_DESC(pal, "Set PAL standard: BGH, DK, I, M, N, Nc, 60"); @@ -218,7 +219,7 @@ MODULE_PARM_DESC(ivtv_yuv_mode, "\t\t\tDefault: 0 (interlaced)"); MODULE_PARM_DESC(ivtv_yuv_threshold, "If ivtv_yuv_mode is 2 (auto) then playback content as\n\t\tprogressive if src height <= ivtv_yuvthreshold\n" - "\t\t\tDefault: 480");; + "\t\t\tDefault: 480"); MODULE_PARM_DESC(enc_mpg_buffers, "Encoder MPG Buffers (in MB)\n" "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_MPG_BUFFERS)); diff --git a/linux/drivers/media/video/ivtv/ivtv-i2c.c b/linux/drivers/media/video/ivtv/ivtv-i2c.c index eed4d2364..484a323f1 100644 --- a/linux/drivers/media/video/ivtv/ivtv-i2c.c +++ b/linux/drivers/media/video/ivtv/ivtv-i2c.c @@ -639,6 +639,7 @@ int init_ivtv_i2c(struct ivtv *itv) retval = i2c_add_adapter(&itv->i2c_adap); else retval = i2c_bit_add_bus(&itv->i2c_adap); + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) /* Instantiate the IR receiver device, if present */ if (retval == 0) { @@ -666,6 +667,7 @@ int init_ivtv_i2c(struct ivtv *itv) i2c_new_probed_device(&itv->i2c_adap, &info, addr_list); } #endif + return retval; } diff --git a/linux/drivers/media/video/ivtv/ivtv-queue.c b/linux/drivers/media/video/ivtv/ivtv-queue.c index ff7b7dede..7fde36e6d 100644 --- a/linux/drivers/media/video/ivtv/ivtv-queue.c +++ b/linux/drivers/media/video/ivtv/ivtv-queue.c @@ -230,7 +230,8 @@ int ivtv_stream_alloc(struct ivtv_stream *s) return -ENOMEM; } if (ivtv_might_use_dma(s)) { - s->sg_handle = pci_map_single(itv->pdev, s->sg_dma, sizeof(struct ivtv_sg_element), s->dma); + s->sg_handle = pci_map_single(itv->pdev, s->sg_dma, + sizeof(struct ivtv_sg_element), PCI_DMA_TODEVICE); ivtv_stream_sync_for_cpu(s); } diff --git a/linux/drivers/media/video/meye.c b/linux/drivers/media/video/meye.c index 1fb7024a5..1d0a0cc81 100644 --- a/linux/drivers/media/video/meye.c +++ b/linux/drivers/media/video/meye.c @@ -1925,8 +1925,7 @@ static void __devexit meye_remove(struct pci_dev *pcidev) } static struct pci_device_id meye_pci_tbl[] = { - { PCI_VENDOR_ID_KAWASAKI, PCI_DEVICE_ID_MCHIP_KL5A72002, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VDEVICE(KAWASAKI, PCI_DEVICE_ID_MCHIP_KL5A72002), 0 }, { } }; diff --git a/linux/drivers/media/video/mt9v011.c b/linux/drivers/media/video/mt9v011.c new file mode 100644 index 000000000..bf68ea63f --- /dev/null +++ b/linux/drivers/media/video/mt9v011.c @@ -0,0 +1,512 @@ +/* + * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor + * + * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#include <linux/i2c.h> +#include "compat.h" +#include <linux/videodev2.h> +#include <linux/delay.h> +#include <asm/div64.h> +#include <media/v4l2-device.h> +#include "mt9v011.h" +#include <media/v4l2-i2c-drv.h> +#include <media/v4l2-chip-ident.h> + +MODULE_DESCRIPTION("Micron mt9v011 sensor driver"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); +MODULE_LICENSE("GPL"); + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26) +/* standard i2c insmod options */ +static unsigned short normal_i2c[] = { + 0xba >> 1, + I2C_CLIENT_END +}; + +I2C_CLIENT_INSMOD; +#endif + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-2)"); + +/* supported controls */ +static struct v4l2_queryctrl mt9v011_qctrl[] = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = (1 << 10) - 1, + .step = 1, + .default_value = 0x0020, + .flags = 0, + }, { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Red Balance", + .minimum = -1 << 9, + .maximum = (1 << 9) - 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Blue Balance", + .minimum = -1 << 9, + .maximum = (1 << 9) - 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, +}; + +struct mt9v011 { + struct v4l2_subdev sd; + unsigned width, height; + unsigned xtal; + + u16 global_gain, red_bal, blue_bal; +}; + +static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd) +{ + return container_of(sd, struct mt9v011, sd); +} + +static int mt9v011_read(struct v4l2_subdev *sd, unsigned char addr) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + __be16 buffer; + int rc, val; + + rc = i2c_master_send(c, &addr, 1); + if (rc != 1) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 1)\n", rc); + + msleep(10); + + rc = i2c_master_recv(c, (char *)&buffer, 2); + if (rc != 2) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 2)\n", rc); + + val = be16_to_cpu(buffer); + + v4l2_dbg(2, debug, sd, "mt9v011: read 0x%02x = 0x%04x\n", addr, val); + + return val; +} + +static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr, + u16 value) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char buffer[3]; + int rc; + + buffer[0] = addr; + buffer[1] = value >> 8; + buffer[2] = value & 0xff; + + v4l2_dbg(2, debug, sd, + "mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value); + rc = i2c_master_send(c, buffer, 3); + if (rc != 3) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 3)\n", rc); +} + + +struct i2c_reg_value { + unsigned char reg; + u16 value; +}; + +/* + * Values used at the original driver + * Some values are marked as Reserved at the datasheet + */ +static const struct i2c_reg_value mt9v011_init_default[] = { + { R0D_MT9V011_RESET, 0x0001 }, + { R0D_MT9V011_RESET, 0x0000 }, + + { R0C_MT9V011_SHUTTER_DELAY, 0x0000 }, + { R09_MT9V011_SHUTTER_WIDTH, 0x1fc }, + + { R0A_MT9V011_CLK_SPEED, 0x0000 }, + { R1E_MT9V011_DIGITAL_ZOOM, 0x0000 }, + { R20_MT9V011_READ_MODE, 0x1000 }, + + { R07_MT9V011_OUT_CTRL, 0x0002 }, /* chip enable */ +}; + +static void set_balance(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + u16 green1_gain, green2_gain, blue_gain, red_gain; + + green1_gain = core->global_gain; + green2_gain = core->global_gain; + + blue_gain = core->global_gain + + core->global_gain * core->blue_bal / (1 << 9); + + red_gain = core->global_gain + + core->global_gain * core->blue_bal / (1 << 9); + + mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green1_gain); + mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green1_gain); + mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain); + mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain); +} + +static void calc_fps(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned height, width, hblank, vblank, speed; + unsigned row_time, t_time; + u64 frames_per_ms; + unsigned tmp; + + height = mt9v011_read(sd, R03_MT9V011_HEIGHT); + width = mt9v011_read(sd, R04_MT9V011_WIDTH); + hblank = mt9v011_read(sd, R05_MT9V011_HBLANK); + vblank = mt9v011_read(sd, R06_MT9V011_VBLANK); + speed = mt9v011_read(sd, R0A_MT9V011_CLK_SPEED); + + row_time = (width + 113 + hblank) * (speed + 2); + t_time = row_time * (height + vblank + 1); + + frames_per_ms = core->xtal * 1000l; + do_div(frames_per_ms, t_time); + tmp = frames_per_ms; + + v4l2_dbg(1, debug, sd, "Programmed to %u.%03u fps (%d pixel clcks)\n", + tmp / 1000, tmp % 1000, t_time); +} + +static void set_res(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned vstart, hstart; + + /* + * The mt9v011 doesn't have scaling. So, in order to select the desired + * resolution, we're cropping at the middle of the sensor. + * hblank and vblank should be adjusted, in order to warrant that + * we'll preserve the line timings for 30 fps, no matter what resolution + * is selected. + * NOTE: datasheet says that width (and height) should be filled with + * width-1. However, this doesn't work, since one pixel per line will + * be missing. + */ + + hstart = 14 + (640 - core->width) / 2; + mt9v011_write(sd, R02_MT9V011_COLSTART, hstart); + mt9v011_write(sd, R04_MT9V011_WIDTH, core->width); + mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width); + + vstart = 8 + (480 - core->height) / 2; + mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart); + mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height); + mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height); + + calc_fps(sd); +}; + +static int mt9v011_reset(struct v4l2_subdev *sd, u32 val) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++) + mt9v011_write(sd, mt9v011_init_default[i].reg, + mt9v011_init_default[i].value); + + set_balance(sd); + set_res(sd); + + return 0; +}; + +static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct mt9v011 *core = to_mt9v011(sd); + + v4l2_dbg(1, debug, sd, "g_ctrl called\n"); + + switch (ctrl->id) { + case V4L2_CID_GAIN: + ctrl->value = core->global_gain; + return 0; + case V4L2_CID_RED_BALANCE: + ctrl->value = core->red_bal; + return 0; + case V4L2_CID_BLUE_BALANCE: + ctrl->value = core->blue_bal; + return 0; + } + return -EINVAL; +} + +static int mt9v011_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) +{ + int i; + + v4l2_dbg(1, debug, sd, "queryctrl called\n"); + + for (i = 0; i < ARRAY_SIZE(mt9v011_qctrl); i++) + if (qc->id && qc->id == mt9v011_qctrl[i].id) { + memcpy(qc, &(mt9v011_qctrl[i]), + sizeof(*qc)); + return 0; + } + + return -EINVAL; +} + + +static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct mt9v011 *core = to_mt9v011(sd); + u8 i, n; + n = ARRAY_SIZE(mt9v011_qctrl); + + for (i = 0; i < n; i++) { + if (ctrl->id != mt9v011_qctrl[i].id) + continue; + if (ctrl->value < mt9v011_qctrl[i].minimum || + ctrl->value > mt9v011_qctrl[i].maximum) + return -ERANGE; + v4l2_dbg(1, debug, sd, "s_ctrl: id=%d, value=%d\n", + ctrl->id, ctrl->value); + break; + } + + switch (ctrl->id) { + case V4L2_CID_GAIN: + core->global_gain = ctrl->value; + break; + case V4L2_CID_RED_BALANCE: + core->red_bal = ctrl->value; + break; + case V4L2_CID_BLUE_BALANCE: + core->blue_bal = ctrl->value; + break; + default: + return -EINVAL; + } + + set_balance(sd); + + return 0; +} + +static int mt9v011_enum_fmt(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt) +{ + if (fmt->index > 0) + return -EINVAL; + + fmt->flags = 0; + strcpy(fmt->description, "8 bpp Bayer GRGR..BGBG"); + fmt->pixelformat = V4L2_PIX_FMT_SGRBG8; + + return 0; +} + +static int mt9v011_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + if (pix->pixelformat != V4L2_PIX_FMT_SGRBG8) + return -EINVAL; + + v4l_bound_align_image(&pix->width, 48, 639, 1, + &pix->height, 32, 480, 1, 0); + + return 0; +} + +static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + struct mt9v011 *core = to_mt9v011(sd); + int rc; + + rc = mt9v011_try_fmt(sd, fmt); + if (rc < 0) + return -EINVAL; + + core->width = pix->width; + core->height = pix->height; + + set_res(sd); + + return 0; +} + +static int mt9v011_s_config(struct v4l2_subdev *sd, int dumb, void *data) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned *xtal = data; + + v4l2_dbg(1, debug, sd, "s_config called\n"); + + if (xtal) { + core->xtal = *xtal; + v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n", + *xtal / 1000000, (*xtal / 1000) % 1000); + } + + return 0; +} + + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9v011_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + reg->val = mt9v011_read(sd, reg->reg & 0xff); + reg->size = 2; + + return 0; +} + +static int mt9v011_s_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + mt9v011_write(sd, reg->reg & 0xff, reg->val & 0xffff); + + return 0; +} +#endif + +static int mt9v011_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011, + MT9V011_VERSION); +} + +static const struct v4l2_subdev_core_ops mt9v011_core_ops = { + .queryctrl = mt9v011_queryctrl, + .g_ctrl = mt9v011_g_ctrl, + .s_ctrl = mt9v011_s_ctrl, + .reset = mt9v011_reset, + .s_config = mt9v011_s_config, + .g_chip_ident = mt9v011_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9v011_g_register, + .s_register = mt9v011_s_register, +#endif +}; + +static const struct v4l2_subdev_video_ops mt9v011_video_ops = { + .enum_fmt = mt9v011_enum_fmt, + .try_fmt = mt9v011_try_fmt, + .s_fmt = mt9v011_s_fmt, +}; + +static const struct v4l2_subdev_ops mt9v011_ops = { + .core = &mt9v011_core_ops, + .video = &mt9v011_video_ops, +}; + + +/**************************************************************************** + I2C Client & Driver + ****************************************************************************/ + +static int mt9v011_probe(struct i2c_client *c, + const struct i2c_device_id *id) +{ + u16 version; + struct mt9v011 *core; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(c->adapter, + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + core = kzalloc(sizeof(struct mt9v011), GFP_KERNEL); + if (!core) + return -ENOMEM; + + sd = &core->sd; + v4l2_i2c_subdev_init(sd, c, &mt9v011_ops); + + /* Check if the sensor is really a MT9V011 */ + version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION); + if (version != MT9V011_VERSION) { + v4l2_info(sd, "*** unknown micron chip detected (0x%04x.\n", + version); + kfree(core); + return -EINVAL; + } + + core->global_gain = 0x0024; + core->width = 640; + core->height = 480; + core->xtal = 27000000; /* Hz */ + + v4l_info(c, "chip found @ 0x%02x (%s)\n", + c->addr << 1, c->adapter->name); + + return 0; +} + +static int mt9v011_remove(struct i2c_client *c) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(c); + + v4l2_dbg(1, debug, sd, + "mt9v011.c: removing mt9v011 adapter on address 0x%x\n", + c->addr << 1); + + v4l2_device_unregister_subdev(sd); + kfree(to_mt9v011(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26) +static const struct i2c_device_id mt9v011_id[] = { + { "mt9v011", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9v011_id); + +#endif +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "mt9v011", + .probe = mt9v011_probe, + .remove = mt9v011_remove, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26) + .legacy_class = I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL, +#else + .id_table = mt9v011_id, +#endif +}; diff --git a/linux/drivers/media/video/mt9v011.h b/linux/drivers/media/video/mt9v011.h new file mode 100644 index 000000000..9e443ee30 --- /dev/null +++ b/linux/drivers/media/video/mt9v011.h @@ -0,0 +1,35 @@ +/* + * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor + * + * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#ifndef MT9V011_H_ +#define MT9V011_H_ + +#define R00_MT9V011_CHIP_VERSION 0x00 +#define R01_MT9V011_ROWSTART 0x01 +#define R02_MT9V011_COLSTART 0x02 +#define R03_MT9V011_HEIGHT 0x03 +#define R04_MT9V011_WIDTH 0x04 +#define R05_MT9V011_HBLANK 0x05 +#define R06_MT9V011_VBLANK 0x06 +#define R07_MT9V011_OUT_CTRL 0x07 +#define R09_MT9V011_SHUTTER_WIDTH 0x09 +#define R0A_MT9V011_CLK_SPEED 0x0a +#define R0B_MT9V011_RESTART 0x0b +#define R0C_MT9V011_SHUTTER_DELAY 0x0c +#define R0D_MT9V011_RESET 0x0d +#define R1E_MT9V011_DIGITAL_ZOOM 0x1e +#define R20_MT9V011_READ_MODE 0x20 +#define R2B_MT9V011_GREEN_1_GAIN 0x2b +#define R2C_MT9V011_BLUE_GAIN 0x2c +#define R2D_MT9V011_RED_GAIN 0x2d +#define R2E_MT9V011_GREEN_2_GAIN 0x2e +#define R35_MT9V011_GLOBAL_GAIN 0x35 +#define RF1_MT9V011_CHIP_ENABLE 0xf1 + +#define MT9V011_VERSION 0x8243 + +#endif diff --git a/linux/drivers/media/video/mx3_camera.c b/linux/drivers/media/video/mx3_camera.c index 4d47eeb14..e605c076e 100644 --- a/linux/drivers/media/video/mx3_camera.c +++ b/linux/drivers/media/video/mx3_camera.c @@ -1074,7 +1074,7 @@ static struct soc_camera_host_ops mx3_soc_camera_host_ops = { .set_bus_param = mx3_camera_set_bus_param, }; -static int mx3_camera_probe(struct platform_device *pdev) +static int __devinit mx3_camera_probe(struct platform_device *pdev) { struct mx3_camera_dev *mx3_cam; struct resource *res; @@ -1194,11 +1194,11 @@ static struct platform_driver mx3_camera_driver = { .name = MX3_CAM_DRV_NAME, }, .probe = mx3_camera_probe, - .remove = __exit_p(mx3_camera_remove), + .remove = __devexit_p(mx3_camera_remove), }; -static int __devinit mx3_camera_init(void) +static int __init mx3_camera_init(void) { return platform_driver_register(&mx3_camera_driver); } diff --git a/linux/drivers/media/video/ov511.c b/linux/drivers/media/video/ov511.c index 12d109eaa..346eed722 100644 --- a/linux/drivers/media/video/ov511.c +++ b/linux/drivers/media/video/ov511.c @@ -112,6 +112,8 @@ static int framedrop = -1; static int fastset; static int force_palette; static int backlight; +/* Bitmask marking allocated devices from 0 to OV511_MAX_UNIT_VIDEO */ +static unsigned long ov511_devused; static int unit_video[OV511_MAX_UNIT_VIDEO]; static int remove_zeros; static int mirror; @@ -209,8 +211,6 @@ static const int i2c_detect_tries = 5; static struct usb_device_id device_table [] = { { USB_DEVICE(VEND_OMNIVISION, PROD_OV511) }, { USB_DEVICE(VEND_OMNIVISION, PROD_OV511PLUS) }, - { USB_DEVICE(VEND_OMNIVISION, PROD_OV518) }, - { USB_DEVICE(VEND_OMNIVISION, PROD_OV518PLUS) }, { USB_DEVICE(VEND_MATTEL, PROD_ME2CAM) }, { } /* Terminating entry */ }; @@ -5724,7 +5724,7 @@ ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id) struct usb_device *dev = interface_to_usbdev(intf); struct usb_interface_descriptor *idesc; struct usb_ov511 *ov; - int i; + int i, rc, nr; PDEBUG(1, "probing for device..."); @@ -5849,33 +5849,41 @@ ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id) ov->vdev->parent = &intf->dev; video_set_drvdata(ov->vdev, ov); - for (i = 0; i < OV511_MAX_UNIT_VIDEO; i++) { - /* Minor 0 cannot be specified; assume user wants autodetect */ - if (unit_video[i] == 0) - break; + mutex_lock(&ov->lock); - if (video_register_device(ov->vdev, VFL_TYPE_GRABBER, - unit_video[i]) >= 0) { - break; - } - } + /* Check to see next free device and mark as used */ + nr = find_first_zero_bit(&ov511_devused, OV511_MAX_UNIT_VIDEO); + + /* Registers device */ + if (unit_video[nr] != 0) + rc = video_register_device(ov->vdev, VFL_TYPE_GRABBER, + unit_video[nr]); + else + rc = video_register_device(ov->vdev, VFL_TYPE_GRABBER, -1); - /* Use the next available one */ - if ((ov->vdev->minor == -1) && - video_register_device(ov->vdev, VFL_TYPE_GRABBER, -1) < 0) { + if (rc < 0) { err("video_register_device failed"); + mutex_unlock(&ov->lock); goto error; } + /* Mark device as used */ + ov511_devused |= 1 << nr; + ov->nr = nr; + dev_info(&intf->dev, "Device at %s registered to minor %d\n", ov->usb_path, ov->vdev->minor); usb_set_intfdata(intf, ov); if (ov_create_sysfs(ov->vdev)) { err("ov_create_sysfs failed"); + ov511_devused &= ~(1 << nr); + mutex_unlock(&ov->lock); goto error; } + mutex_lock(&ov->lock); + return 0; error: @@ -5910,10 +5918,16 @@ ov51x_disconnect(struct usb_interface *intf) PDEBUG(3, ""); + mutex_lock(&ov->lock); usb_set_intfdata (intf, NULL); - if (!ov) + if (!ov) { + mutex_unlock(&ov->lock); return; + } + + /* Free device number */ + ov511_devused &= ~(1 << ov->nr); if (ov->vdev) video_unregister_device(ov->vdev); @@ -5931,6 +5945,7 @@ ov51x_disconnect(struct usb_interface *intf) ov->streaming = 0; ov51x_unlink_isoc(ov); + mutex_unlock(&ov->lock); ov->dev = NULL; diff --git a/linux/drivers/media/video/ov511.h b/linux/drivers/media/video/ov511.h index c303ac5a8..c213d944e 100644 --- a/linux/drivers/media/video/ov511.h +++ b/linux/drivers/media/video/ov511.h @@ -495,6 +495,9 @@ struct usb_ov511 { int has_decoder; /* Device has a video decoder */ int pal; /* Device is designed for PAL resolution */ + /* ov511 device number ID */ + int nr; /* Stores a device number */ + /* I2C interface */ struct mutex i2c_lock; /* Protect I2C controller regs */ unsigned char primary_i2c_slave; /* I2C write id of sensor */ diff --git a/linux/drivers/media/video/ov772x.c b/linux/drivers/media/video/ov772x.c index b17a7400d..4b0363940 100644 --- a/linux/drivers/media/video/ov772x.c +++ b/linux/drivers/media/video/ov772x.c @@ -1071,10 +1071,12 @@ static int ov772x_probe(struct i2c_client *client, struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); int ret; - info = client->dev.platform_data; - if (!info) + if (!client->dev.platform_data) return -EINVAL; + info = container_of(client->dev.platform_data, + struct ov772x_camera_info, link); + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { dev_err(&adapter->dev, "I2C-Adapter doesn't support " diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-audio.c b/linux/drivers/media/video/pvrusb2/pvrusb2-audio.c index 86049f412..42875ec21 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-audio.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-audio.c @@ -49,11 +49,13 @@ static const int routing_scheme0[] = { MSP_DSP_IN_SCART), }; -static const struct routing_scheme routing_schemes[] = { - [PVR2_ROUTING_SCHEME_HAUPPAUGE] = { - .def = routing_scheme0, - .cnt = ARRAY_SIZE(routing_scheme0), - }, +static const struct routing_scheme routing_def0 = { + .def = routing_scheme0, + .cnt = ARRAY_SIZE(routing_scheme0), +}; + +static const struct routing_scheme *routing_schemes[] = { + [PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0, }; void pvr2_msp3400_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) @@ -66,7 +68,7 @@ void pvr2_msp3400_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) pvr2_trace(PVR2_TRACE_CHIPS, "subdev msp3400 v4l2 set_stereo"); if ((sid < ARRAY_SIZE(routing_schemes)) && - ((sp = routing_schemes + sid) != NULL) && + ((sp = routing_schemes[sid]) != NULL) && (hdw->input_val >= 0) && (hdw->input_val < sp->cnt)) { input = sp->def[hdw->input_val]; diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c b/linux/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c index f99b77c92..7bcaa0cd4 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c @@ -50,11 +50,13 @@ static const int routing_scheme1[] = { [PVR2_CVAL_INPUT_SVIDEO] = 0, }; -static const struct routing_scheme routing_schemes[] = { - [PVR2_ROUTING_SCHEME_ONAIR] = { - .def = routing_scheme1, - .cnt = ARRAY_SIZE(routing_scheme1), - }, +static const struct routing_scheme routing_def1 = { + .def = routing_scheme1, + .cnt = ARRAY_SIZE(routing_scheme1), +}; + +static const struct routing_scheme *routing_schemes[] = { + [PVR2_ROUTING_SCHEME_ONAIR] = &routing_def1, }; @@ -66,12 +68,11 @@ void pvr2_cs53l32a_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) u32 input; pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_input(%d)", hdw->input_val); - if ((sid < ARRAY_SIZE(routing_schemes)) && - ((sp = routing_schemes + sid) != NULL) && - (hdw->input_val >= 0) && - (hdw->input_val < sp->cnt)) { - input = sp->def[hdw->input_val]; - } else { + sp = (sid < ARRAY_SIZE(routing_schemes)) ? + routing_schemes[sid] : NULL; + if ((sp == NULL) || + (hdw->input_val < 0) || + (hdw->input_val >= sp->cnt)) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, "*** WARNING *** subdev v4l2 set_input:" " Invalid routing scheme (%u)" @@ -79,6 +80,7 @@ void pvr2_cs53l32a_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) sid, hdw->input_val); return; } + input = sp->def[hdw->input_val]; sd->ops->audio->s_routing(sd, input, 0, 0); } } diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c b/linux/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c index ef47c3874..e15d7fb6c 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c @@ -69,6 +69,11 @@ static const struct routing_scheme_item routing_scheme0[] = { }, }; +static const struct routing_scheme routing_def0 = { + .def = routing_scheme0, + .cnt = ARRAY_SIZE(routing_scheme0), +}; + /* Specific to gotview device */ static const struct routing_scheme_item routing_schemegv[] = { [PVR2_CVAL_INPUT_TV] = { @@ -91,15 +96,14 @@ static const struct routing_scheme_item routing_schemegv[] = { }, }; -static const struct routing_scheme routing_schemes[] = { - [PVR2_ROUTING_SCHEME_HAUPPAUGE] = { - .def = routing_scheme0, - .cnt = ARRAY_SIZE(routing_scheme0), - }, - [PVR2_ROUTING_SCHEME_GOTVIEW] = { - .def = routing_schemegv, - .cnt = ARRAY_SIZE(routing_schemegv), - }, +static const struct routing_scheme routing_defgv = { + .def = routing_schemegv, + .cnt = ARRAY_SIZE(routing_schemegv), +}; + +static const struct routing_scheme *routing_schemes[] = { + [PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0, + [PVR2_ROUTING_SCHEME_GOTVIEW] = &routing_defgv, }; void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) @@ -111,13 +115,11 @@ void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) const struct routing_scheme *sp; unsigned int sid = hdw->hdw_desc->signal_routing_scheme; - if ((sid < ARRAY_SIZE(routing_schemes)) && - ((sp = routing_schemes + sid) != NULL) && - (hdw->input_val >= 0) && - (hdw->input_val < sp->cnt)) { - vid_input = sp->def[hdw->input_val].vid; - aud_input = sp->def[hdw->input_val].aud; - } else { + sp = (sid < ARRAY_SIZE(routing_schemes)) ? + routing_schemes[sid] : NULL; + if ((sp == NULL) || + (hdw->input_val < 0) || + (hdw->input_val >= sp->cnt)) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, "*** WARNING *** subdev cx2584x set_input:" " Invalid routing scheme (%u)" @@ -125,7 +127,8 @@ void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) sid, hdw->input_val); return; } - + vid_input = sp->def[hdw->input_val].vid; + aud_input = sp->def[hdw->input_val].aud; pvr2_trace(PVR2_TRACE_CHIPS, "subdev cx2584x set_input vid=0x%x aud=0x%x", vid_input, aud_input); diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 3411cb36a..0bbd20f13 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -86,8 +86,8 @@ MODULE_PARM_DESC(video_std,"specify initial video standard"); module_param_array(tolerance, int, NULL, 0444); MODULE_PARM_DESC(tolerance,"specify stream error tolerance"); -/* US Broadcast channel 7 (175.25 MHz) */ -static int default_tv_freq = 175250000L; +/* US Broadcast channel 3 (61.25 MHz), to help with testing */ +static int default_tv_freq = 61250000L; /* 104.3 MHz, a usable FM station for my area */ static int default_radio_freq = 104300000L; @@ -2004,6 +2004,34 @@ static unsigned int pvr2_copy_i2c_addr_list( } +static void pvr2_hdw_cx25840_vbi_hack(struct pvr2_hdw *hdw) +{ + /* + Mike Isely <isely@pobox.com> 19-Nov-2006 - This bit of nuttiness + for cx25840 causes that module to correctly set up its video + scaling. This is really a problem in the cx25840 module itself, + but we work around it here. The problem has not been seen in + ivtv because there VBI is supported and set up. We don't do VBI + here (at least not yet) and thus we never attempted to even set + it up. + */ + struct v4l2_format fmt; + if (hdw->decoder_client_id != PVR2_CLIENT_ID_CX25840) { + /* We're not using a cx25840 so don't enable the hack */ + return; + } + + pvr2_trace(PVR2_TRACE_INIT, + "Module ID %u:" + " Executing cx25840 VBI hack", + hdw->decoder_client_id); + memset(&fmt, 0, sizeof(fmt)); + fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; + v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id, + video, s_fmt, &fmt); +} + + static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw, const struct pvr2_device_client_desc *cd) { @@ -2095,30 +2123,6 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw, /* client-specific setup... */ switch (mid) { case PVR2_CLIENT_ID_CX25840: - hdw->decoder_client_id = mid; - { - /* - Mike Isely <isely@pobox.com> 19-Nov-2006 - This - bit of nuttiness for cx25840 causes that module - to correctly set up its video scaling. This is - really a problem in the cx25840 module itself, - but we work around it here. The problem has not - been seen in ivtv because there VBI is supported - and set up. We don't do VBI here (at least not - yet) and thus we never attempted to even set it - up. - */ - struct v4l2_format fmt; - pvr2_trace(PVR2_TRACE_INIT, - "Module ID %u:" - " Executing cx25840 VBI hack", - mid); - memset(&fmt, 0, sizeof(fmt)); - fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; - v4l2_device_call_all(&hdw->v4l2_dev, mid, - video, s_fmt, &fmt); - } - break; case PVR2_CLIENT_ID_SAA7115: hdw->decoder_client_id = mid; break; @@ -2219,6 +2223,8 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) cptr->info->set_value(cptr,~0,cptr->info->default_value); } + pvr2_hdw_cx25840_vbi_hack(hdw); + /* Set up special default values for the television and radio frequencies here. It's not really important what these defaults are, but I set them to something usable in the Chicago area just @@ -2976,6 +2982,7 @@ static void pvr2_subdev_update(struct pvr2_hdw *hdw) vs = hdw->std_mask_cur; v4l2_device_call_all(&hdw->v4l2_dev, 0, core, s_std, vs); + pvr2_hdw_cx25840_vbi_hack(hdw); } hdw->tuner_signal_stale = !0; hdw->cropcap_stale = !0; @@ -4170,6 +4177,7 @@ int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw) if (hdw->decoder_client_id) { v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id, core, reset, 0); + pvr2_hdw_cx25840_vbi_hack(hdw); return 0; } pvr2_trace(PVR2_TRACE_INIT, diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c b/linux/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c index d240331a6..4be489c45 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c @@ -55,6 +55,11 @@ static const int routing_scheme0[] = { [PVR2_CVAL_INPUT_SVIDEO] = SAA7115_SVIDEO2, }; +static const struct routing_scheme routing_def0 = { + .def = routing_scheme0, + .cnt = ARRAY_SIZE(routing_scheme0), +}; + static const int routing_scheme1[] = { [PVR2_CVAL_INPUT_TV] = SAA7115_COMPOSITE4, [PVR2_CVAL_INPUT_RADIO] = SAA7115_COMPOSITE5, @@ -62,15 +67,14 @@ static const int routing_scheme1[] = { [PVR2_CVAL_INPUT_SVIDEO] = SAA7115_SVIDEO2, /* or SVIDEO0, it seems */ }; -static const struct routing_scheme routing_schemes[] = { - [PVR2_ROUTING_SCHEME_HAUPPAUGE] = { - .def = routing_scheme0, - .cnt = ARRAY_SIZE(routing_scheme0), - }, - [PVR2_ROUTING_SCHEME_ONAIR] = { - .def = routing_scheme1, - .cnt = ARRAY_SIZE(routing_scheme1), - }, +static const struct routing_scheme routing_def1 = { + .def = routing_scheme1, + .cnt = ARRAY_SIZE(routing_scheme1), +}; + +static const struct routing_scheme *routing_schemes[] = { + [PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0, + [PVR2_ROUTING_SCHEME_ONAIR] = &routing_def1, }; void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) @@ -82,12 +86,12 @@ void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_input(%d)", hdw->input_val); - if ((sid < ARRAY_SIZE(routing_schemes)) && - ((sp = routing_schemes + sid) != NULL) && - (hdw->input_val >= 0) && - (hdw->input_val < sp->cnt)) { - input = sp->def[hdw->input_val]; - } else { + + sp = (sid < ARRAY_SIZE(routing_schemes)) ? + routing_schemes[sid] : NULL; + if ((sp == NULL) || + (hdw->input_val < 0) || + (hdw->input_val >= sp->cnt)) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, "*** WARNING *** subdev v4l2 set_input:" " Invalid routing scheme (%u)" @@ -95,6 +99,7 @@ void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) sid, hdw->input_val); return; } + input = sp->def[hdw->input_val]; sd->ops->video->s_routing(sd, input, 0, 0); } } diff --git a/linux/drivers/media/video/pwc/pwc-if.c b/linux/drivers/media/video/pwc/pwc-if.c index eaeea5520..4087612ee 100644 --- a/linux/drivers/media/video/pwc/pwc-if.c +++ b/linux/drivers/media/video/pwc/pwc-if.c @@ -1791,7 +1791,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id return -ENOMEM; } memcpy(pdev->vdev, &pwc_template, sizeof(pwc_template)); - pdev->vdev->parent = &(udev->dev); + pdev->vdev->parent = &intf->dev; strcpy(pdev->vdev->name, name); video_set_drvdata(pdev->vdev, pdev); diff --git a/linux/drivers/media/video/pwc/pwc.h b/linux/drivers/media/video/pwc/pwc.h index 3a89dca13..7a766eb35 100644 --- a/linux/drivers/media/video/pwc/pwc.h +++ b/linux/drivers/media/video/pwc/pwc.h @@ -137,12 +137,6 @@ #define DEVICE_USE_CODEC3(x) ((x)>=700) #define DEVICE_USE_CODEC23(x) ((x)>=675) - -#ifndef V4L2_PIX_FMT_PWC1 -#define V4L2_PIX_FMT_PWC1 v4l2_fourcc('P','W','C','1') -#define V4L2_PIX_FMT_PWC2 v4l2_fourcc('P','W','C','2') -#endif - /* The following structures were based on cpia.h. Why reinvent the wheel? :-) */ struct pwc_iso_buf { diff --git a/linux/drivers/media/video/pxa_camera.c b/linux/drivers/media/video/pxa_camera.c index 2c122ec90..8964d60cd 100644 --- a/linux/drivers/media/video/pxa_camera.c +++ b/linux/drivers/media/video/pxa_camera.c @@ -1403,13 +1403,15 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd, return -EINVAL; } - /* Limit to pxa hardware capabilities. YUV422P planar format requires + /* + * Limit to pxa hardware capabilities. YUV422P planar format requires * images size to be a multiple of 16 bytes. If not, zeros will be * inserted between Y and U planes, and U and V planes, which violates - * the YUV422P standard. */ - v4l2_bound_align_image(&pix->width, 48, 2048, 1, - &pix->height, 32, 2048, 0, - xlate->host_fmt->fourcc == V4L2_PIX_FMT_YUV422P ? 4 : 0); + * the YUV422P standard. + */ + v4l_bound_align_image(&pix->width, 48, 2048, 1, + &pix->height, 32, 2048, 0, + xlate->host_fmt->fourcc == V4L2_PIX_FMT_YUV422P ? 4 : 0); pix->bytesperline = pix->width * DIV_ROUND_UP(xlate->host_fmt->depth, 8); @@ -1541,7 +1543,7 @@ static struct soc_camera_host_ops pxa_soc_camera_host_ops = { .set_bus_param = pxa_camera_set_bus_param, }; -static int pxa_camera_probe(struct platform_device *pdev) +static int __devinit pxa_camera_probe(struct platform_device *pdev) { struct pxa_camera_dev *pcdev; struct resource *res; @@ -1716,11 +1718,11 @@ static struct platform_driver pxa_camera_driver = { .name = PXA_CAM_DRV_NAME, }, .probe = pxa_camera_probe, - .remove = __exit_p(pxa_camera_remove), + .remove = __devexit_p(pxa_camera_remove), }; -static int __devinit pxa_camera_init(void) +static int __init pxa_camera_init(void) { return platform_driver_register(&pxa_camera_driver); } diff --git a/linux/drivers/media/video/saa6588.c b/linux/drivers/media/video/saa6588.c index 58aff8305..dcc83511e 100644 --- a/linux/drivers/media/video/saa6588.c +++ b/linux/drivers/media/video/saa6588.c @@ -51,7 +51,7 @@ I2C_CLIENT_INSMOD; /* insmod options */ static unsigned int debug; static unsigned int xtal; -static unsigned int rbds; +static unsigned int mmbs; static unsigned int plvl; static unsigned int bufblocks = 100; @@ -59,8 +59,8 @@ module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "enable debug messages"); module_param(xtal, int, 0); MODULE_PARM_DESC(xtal, "select oscillator frequency (0..3), default 0"); -module_param(rbds, int, 0); -MODULE_PARM_DESC(rbds, "select mode, 0=RDS, 1=RBDS, default 0"); +module_param(mmbs, int, 0); +MODULE_PARM_DESC(mmbs, "enable MMBS mode: 0=off (default), 1=on"); module_param(plvl, int, 0); MODULE_PARM_DESC(plvl, "select pause level (0..3), default 0"); module_param(bufblocks, int, 0); @@ -89,6 +89,7 @@ struct saa6588 { unsigned char last_blocknum; wait_queue_head_t read_queue; int data_available_for_read; + u8 sync; }; static inline struct saa6588 *to_saa6588(struct v4l2_subdev *sd) @@ -272,13 +273,16 @@ static void saa6588_i2c_poll(struct saa6588 *s) unsigned char tmp; /* Although we only need 3 bytes, we have to read at least 6. - SAA6588 returns garbage otherwise */ + SAA6588 returns garbage otherwise. */ if (6 != i2c_master_recv(client, &tmpbuf[0], 6)) { if (debug > 1) dprintk(PREFIX "read error!\n"); return; } + s->sync = tmpbuf[0] & 0x10; + if (!s->sync) + return; blocknum = tmpbuf[0] >> 5; if (blocknum == s->last_blocknum) { if (debug > 3) @@ -297,9 +301,8 @@ static void saa6588_i2c_poll(struct saa6588 *s) occurred during reception of this block. Bit 6: Corrected bit. Indicates that an error was corrected for this data block. - Bits 5-3: Received Offset. Indicates the offset received - by the sync system. - Bits 2-0: Offset Name. Indicates the offset applied to this data. + Bits 5-3: Same as bits 0-2. + Bits 2-0: Block number. SAA6588 byte order is Status-MSB-LSB, so we have to swap the first and the last of the 3 bytes block. @@ -309,12 +312,21 @@ static void saa6588_i2c_poll(struct saa6588 *s) tmpbuf[2] = tmpbuf[0]; tmpbuf[0] = tmp; + /* Map 'Invalid block E' to 'Invalid Block' */ + if (blocknum == 6) + blocknum = V4L2_RDS_BLOCK_INVALID; + /* And if are not in mmbs mode, then 'Block E' is also mapped + to 'Invalid Block'. As far as I can tell MMBS is discontinued, + and if there is ever a need to support E blocks, then please + contact the linux-media mailinglist. */ + else if (!mmbs && blocknum == 5) + blocknum = V4L2_RDS_BLOCK_INVALID; tmp = blocknum; tmp |= blocknum << 3; /* Received offset == Offset Name (OK ?) */ if ((tmpbuf[2] & 0x03) == 0x03) - tmp |= 0x80; /* uncorrectable error */ + tmp |= V4L2_RDS_BLOCK_ERROR; /* uncorrectable error */ else if ((tmpbuf[2] & 0x03) != 0x00) - tmp |= 0x40; /* corrected error */ + tmp |= V4L2_RDS_BLOCK_CORRECTED; /* corrected error */ tmpbuf[2] = tmp; /* Is this enough ? Should we also check other bits ? */ spin_lock_irqsave(&s->lock, flags); @@ -340,14 +352,14 @@ static void saa6588_work(struct work_struct *work) schedule_delayed_work(&s->work, msecs_to_jiffies(20)); } -static int saa6588_configure(struct saa6588 *s) +static void saa6588_configure(struct saa6588 *s) { struct i2c_client *client = v4l2_get_subdevdata(&s->sd); unsigned char buf[3]; int rc; buf[0] = cSyncRestart; - if (rbds) + if (mmbs) buf[0] |= cProcessingModeRBDS; buf[1] = cFlywheelDefault; @@ -393,8 +405,6 @@ static int saa6588_configure(struct saa6588 *s) rc = i2c_master_send(client, buf, 3); if (rc != 3) printk(PREFIX "i2c i/o error: rc == %d (should be 3)\n", rc); - - return 0; } /* ---------------------------------------------------------------------- */ @@ -435,6 +445,24 @@ static long saa6588_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) return 0; } +static int saa6588_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct saa6588 *s = to_saa6588(sd); + + vt->capability |= V4L2_TUNER_CAP_RDS; + if (s->sync) + vt->rxsubchans |= V4L2_TUNER_SUB_RDS; + return 0; +} + +static int saa6588_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) +{ + struct saa6588 *s = to_saa6588(sd); + + saa6588_configure(s); + return 0; +} + static int saa6588_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) { struct i2c_client *client = v4l2_get_subdevdata(sd); @@ -449,8 +477,14 @@ static const struct v4l2_subdev_core_ops saa6588_core_ops = { .ioctl = saa6588_ioctl, }; +static const struct v4l2_subdev_tuner_ops saa6588_tuner_ops = { + .g_tuner = saa6588_g_tuner, + .s_tuner = saa6588_s_tuner, +}; + static const struct v4l2_subdev_ops saa6588_ops = { .core = &saa6588_core_ops, + .tuner = &saa6588_tuner_ops, }; /* ---------------------------------------------------------------------- */ diff --git a/linux/drivers/media/video/saa7134/Makefile b/linux/drivers/media/video/saa7134/Makefile index 3dbaa19a6..604158a8c 100644 --- a/linux/drivers/media/video/saa7134/Makefile +++ b/linux/drivers/media/video/saa7134/Makefile @@ -3,8 +3,7 @@ saa7134-objs := saa7134-cards.o saa7134-core.o saa7134-i2c.o \ saa7134-ts.o saa7134-tvaudio.o saa7134-vbi.o \ saa7134-video.o saa7134-input.o -obj-$(CONFIG_VIDEO_SAA7134) += saa7134.o saa7134-empress.o \ - saa6752hs.o +obj-$(CONFIG_VIDEO_SAA7134) += saa6752hs.o saa7134.o saa7134-empress.o obj-$(CONFIG_VIDEO_SAA7134_ALSA) += saa7134-alsa.o diff --git a/linux/drivers/media/video/saa7134/saa7134-cards.c b/linux/drivers/media/video/saa7134/saa7134-cards.c index 064fb86bc..e2d98ff5c 100644 --- a/linux/drivers/media/video/saa7134/saa7134-cards.c +++ b/linux/drivers/media/video/saa7134/saa7134-cards.c @@ -6241,6 +6241,12 @@ struct pci_device_id saa7134_pci_tbl[] = { }, { .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xf736, + .driver_data = SAA7134_BOARD_AVERMEDIA_M103, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x1043, .subdevice = 0x4878, /* REV:1.02G */ .driver_data = SAA7134_BOARD_ASUSTeK_TIGER_3IN1, diff --git a/linux/drivers/media/video/saa7134/saa7134-core.c b/linux/drivers/media/video/saa7134/saa7134-core.c index da73430ad..e466afd18 100644 --- a/linux/drivers/media/video/saa7134/saa7134-core.c +++ b/linux/drivers/media/video/saa7134/saa7134-core.c @@ -1073,8 +1073,10 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, sd = v4l2_i2c_new_probed_subdev_addr(&dev->v4l2_dev, &dev->i2c_adap, "saa6588", "saa6588", saa7134_boards[dev->board].rds_addr); - if (sd) + if (sd) { printk(KERN_INFO "%s: found RDS decoder\n", dev->name); + dev->has_rds = 1; + } } request_submodules(dev); diff --git a/linux/drivers/media/video/saa7134/saa7134-video.c b/linux/drivers/media/video/saa7134/saa7134-video.c index 518de9b2c..5be072c57 100644 --- a/linux/drivers/media/video/saa7134/saa7134-video.c +++ b/linux/drivers/media/video/saa7134/saa7134-video.c @@ -1057,6 +1057,7 @@ static int buffer_prepare(struct videobuf_queue *q, buf->vb.field = field; buf->fmt = fh->fmt; buf->pt = &fh->pt_cap; + dev->video_q.curr = NULL; err = videobuf_iolock(q,&buf->vb,&dev->ovbuf); if (err) @@ -1796,7 +1797,7 @@ static int saa7134_s_input(struct file *file, void *priv, unsigned int i) if (0 != err) return err; - if (i < 0 || i >= SAA7134_INPUT_MAX) + if (i >= SAA7134_INPUT_MAX) return -EINVAL; if (NULL == card_in(dev, i).name) return -EINVAL; @@ -1825,6 +1826,8 @@ static int saa7134_querycap(struct file *file, void *priv, V4L2_CAP_READWRITE | V4L2_CAP_STREAMING | V4L2_CAP_TUNER; + if (dev->has_rds) + cap->capabilities |= V4L2_CAP_RDS_CAPTURE; if (saa7134_no_overlay <= 0) cap->capabilities |= V4L2_CAP_VIDEO_OVERLAY; diff --git a/linux/drivers/media/video/saa7134/saa7134.h b/linux/drivers/media/video/saa7134/saa7134.h index 454802e73..be5abf059 100644 --- a/linux/drivers/media/video/saa7134/saa7134.h +++ b/linux/drivers/media/video/saa7134/saa7134.h @@ -544,6 +544,7 @@ struct saa7134_dev { struct i2c_adapter i2c_adap; struct i2c_client i2c_client; unsigned char eedata[256]; + int has_rds; /* video overlay */ struct v4l2_framebuffer ovbuf; diff --git a/linux/drivers/media/video/se401.c b/linux/drivers/media/video/se401.c index 9ba500f8d..1274a5966 100644 --- a/linux/drivers/media/video/se401.c +++ b/linux/drivers/media/video/se401.c @@ -38,7 +38,7 @@ static const char version[] = "0.24"; static int flickerless; static int video_nr = -1; -static struct usb_device_id device_table [] = { +static struct usb_device_id device_table[] = { { USB_DEVICE(0x03e8, 0x0004) },/* Endpoints/Aox SE401 */ { USB_DEVICE(0x0471, 0x030b) },/* Philips PCVC665K */ { USB_DEVICE(0x047d, 0x5001) },/* Kensington 67014 */ @@ -53,7 +53,8 @@ MODULE_AUTHOR("Jeroen Vreeken <pe1rxq@amsat.org>"); MODULE_DESCRIPTION("SE401 USB Camera Driver"); MODULE_LICENSE("GPL"); module_param(flickerless, int, 0); -MODULE_PARM_DESC(flickerless, "Net frequency to adjust exposure time to (0/50/60)"); +MODULE_PARM_DESC(flickerless, + "Net frequency to adjust exposure time to (0/50/60)"); module_param(video_nr, int, 0); static struct usb_driver se401_driver; @@ -78,8 +79,8 @@ static void *rvmalloc(unsigned long size) adr = (unsigned long) mem; while (size > 0) { SetPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; + adr += PAGE_SIZE; + size -= PAGE_SIZE; } return mem; @@ -95,8 +96,8 @@ static void rvfree(void *mem, unsigned long size) adr = (unsigned long) mem; while ((long) size > 0) { ClearPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; + adr += PAGE_SIZE; + size -= PAGE_SIZE; } vfree(mem); } @@ -112,7 +113,7 @@ static void rvfree(void *mem, unsigned long size) static int se401_sndctrl(int set, struct usb_se401 *se401, unsigned short req, unsigned short value, unsigned char *cp, int size) { - return usb_control_msg ( + return usb_control_msg( se401->dev, set ? usb_sndctrlpipe(se401->dev, 0) : usb_rcvctrlpipe(se401->dev, 0), req, @@ -132,7 +133,7 @@ static int se401_set_feature(struct usb_se401 *se401, unsigned short selector, and the param in index, but in the logs of the windows driver they do this the other way around... */ - return usb_control_msg ( + return usb_control_msg( se401->dev, usb_sndctrlpipe(se401->dev, 0), SE401_REQ_SET_EXT_FEATURE, @@ -152,7 +153,7 @@ static unsigned short se401_get_feature(struct usb_se401 *se401, wrong here to.... */ unsigned char cp[2]; - usb_control_msg ( + usb_control_msg( se401->dev, usb_rcvctrlpipe(se401->dev, 0), SE401_REQ_GET_EXT_FEATURE, @@ -175,46 +176,51 @@ static unsigned short se401_get_feature(struct usb_se401 *se401, static int se401_send_pict(struct usb_se401 *se401) { - se401_set_feature(se401, HV7131_REG_TITL, se401->expose_l);/* integration time low */ - se401_set_feature(se401, HV7131_REG_TITM, se401->expose_m);/* integration time mid */ - se401_set_feature(se401, HV7131_REG_TITU, se401->expose_h);/* integration time mid */ - se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel);/* reset level value */ - se401_set_feature(se401, HV7131_REG_ARCG, se401->rgain);/* red color gain */ - se401_set_feature(se401, HV7131_REG_AGCG, se401->ggain);/* green color gain */ - se401_set_feature(se401, HV7131_REG_ABCG, se401->bgain);/* blue color gain */ + /* integration time low */ + se401_set_feature(se401, HV7131_REG_TITL, se401->expose_l); + /* integration time mid */ + se401_set_feature(se401, HV7131_REG_TITM, se401->expose_m); + /* integration time mid */ + se401_set_feature(se401, HV7131_REG_TITU, se401->expose_h); + /* reset level value */ + se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel); + /* red color gain */ + se401_set_feature(se401, HV7131_REG_ARCG, se401->rgain); + /* green color gain */ + se401_set_feature(se401, HV7131_REG_AGCG, se401->ggain); + /* blue color gain */ + se401_set_feature(se401, HV7131_REG_ABCG, se401->bgain); return 0; } static void se401_set_exposure(struct usb_se401 *se401, int brightness) { - int integration=brightness<<5; - - if (flickerless==50) { - integration=integration-integration%106667; - } - if (flickerless==60) { - integration=integration-integration%88889; - } - se401->brightness=integration>>5; - se401->expose_h=(integration>>16)&0xff; - se401->expose_m=(integration>>8)&0xff; - se401->expose_l=integration&0xff; + int integration = brightness << 5; + + if (flickerless == 50) + integration = integration-integration % 106667; + if (flickerless == 60) + integration = integration-integration % 88889; + se401->brightness = integration >> 5; + se401->expose_h = (integration >> 16) & 0xff; + se401->expose_m = (integration >> 8) & 0xff; + se401->expose_l = integration & 0xff; } static int se401_get_pict(struct usb_se401 *se401, struct video_picture *p) { - p->brightness=se401->brightness; - if (se401->enhance) { - p->whiteness=32768; - } else { - p->whiteness=0; - } - p->colour=65535; - p->contrast=65535; - p->hue=se401->rgain<<10; - p->palette=se401->palette; - p->depth=3; /* rgb24 */ + p->brightness = se401->brightness; + if (se401->enhance) + p->whiteness = 32768; + else + p->whiteness = 0; + + p->colour = 65535; + p->contrast = 65535; + p->hue = se401->rgain << 10; + p->palette = se401->palette; + p->depth = 3; /* rgb24 */ return 0; } @@ -223,20 +229,19 @@ static int se401_set_pict(struct usb_se401 *se401, struct video_picture *p) { if (p->palette != VIDEO_PALETTE_RGB24) return 1; - se401->palette=p->palette; - if (p->hue!=se401->hue) { - se401->rgain= p->hue>>10; - se401->bgain= 0x40-(p->hue>>10); - se401->hue=p->hue; + se401->palette = p->palette; + if (p->hue != se401->hue) { + se401->rgain = p->hue >> 10; + se401->bgain = 0x40-(p->hue >> 10); + se401->hue = p->hue; } - if (p->brightness!=se401->brightness) { + if (p->brightness != se401->brightness) se401_set_exposure(se401, p->brightness); - } - if (p->whiteness>=32768) { - se401->enhance=1; - } else { - se401->enhance=0; - } + + if (p->whiteness >= 32768) + se401->enhance = 1; + else + se401->enhance = 0; se401_send_pict(se401); se401_send_pict(se401); return 0; @@ -249,7 +254,7 @@ static int se401_set_pict(struct usb_se401 *se401, struct video_picture *p) static void se401_auto_resetlevel(struct usb_se401 *se401) { unsigned int ahrc, alrc; - int oldreset=se401->resetlevel; + int oldreset = se401->resetlevel; /* For some reason this normally read-only register doesn't get reset to zero after reading them just once... @@ -258,24 +263,24 @@ static void se401_auto_resetlevel(struct usb_se401 *se401) se401_get_feature(se401, HV7131_REG_HIREFNOL); se401_get_feature(se401, HV7131_REG_LOREFNOH); se401_get_feature(se401, HV7131_REG_LOREFNOL); - ahrc=256*se401_get_feature(se401, HV7131_REG_HIREFNOH) + + ahrc = 256*se401_get_feature(se401, HV7131_REG_HIREFNOH) + se401_get_feature(se401, HV7131_REG_HIREFNOL); - alrc=256*se401_get_feature(se401, HV7131_REG_LOREFNOH) + + alrc = 256*se401_get_feature(se401, HV7131_REG_LOREFNOH) + se401_get_feature(se401, HV7131_REG_LOREFNOL); /* Not an exact science, but it seems to work pretty well... */ if (alrc > 10) { - while (alrc>=10 && se401->resetlevel < 63) { + while (alrc >= 10 && se401->resetlevel < 63) { se401->resetlevel++; - alrc /=2; + alrc /= 2; } } else if (ahrc > 20) { - while (ahrc>=20 && se401->resetlevel > 0) { + while (ahrc >= 20 && se401->resetlevel > 0) { se401->resetlevel--; - ahrc /=2; + ahrc /= 2; } } - if (se401->resetlevel!=oldreset) + if (se401->resetlevel != oldreset) se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel); return; @@ -304,21 +309,22 @@ static void se401_button_irq(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, urb->status); + dbg("%s - urb shutting down with status: %d", + __func__, urb->status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, urb->status); + dbg("%s - nonzero urb status received: %d", + __func__, urb->status); goto exit; } - if (urb->actual_length >=2) { + if (urb->actual_length >= 2) if (se401->button) - se401->buttonpressed=1; - } + se401->buttonpressed = 1; exit: - status = usb_submit_urb (urb, GFP_ATOMIC); + status = usb_submit_urb(urb, GFP_ATOMIC); if (status) - err ("%s - usb_submit_urb failed with result %d", + err("%s - usb_submit_urb failed with result %d", __func__, status); } @@ -344,55 +350,52 @@ static void se401_video_irq(struct urb *urb) keeps sending them forever... */ if (length && !urb->status) { - se401->nullpackets=0; - switch(se401->scratch[se401->scratch_next].state) { - case BUFFER_READY: - case BUFFER_BUSY: { - se401->dropped++; - break; - } - case BUFFER_UNUSED: { - memcpy(se401->scratch[se401->scratch_next].data, (unsigned char *)urb->transfer_buffer, length); - se401->scratch[se401->scratch_next].state=BUFFER_READY; - se401->scratch[se401->scratch_next].offset=se401->bayeroffset; - se401->scratch[se401->scratch_next].length=length; - if (waitqueue_active(&se401->wq)) { - wake_up_interruptible(&se401->wq); - } - se401->scratch_overflow=0; - se401->scratch_next++; - if (se401->scratch_next>=SE401_NUMSCRATCH) - se401->scratch_next=0; - break; - } - } - se401->bayeroffset+=length; - if (se401->bayeroffset>=se401->cheight*se401->cwidth) { - se401->bayeroffset=0; + se401->nullpackets = 0; + switch (se401->scratch[se401->scratch_next].state) { + case BUFFER_READY: + case BUFFER_BUSY: + se401->dropped++; + break; + case BUFFER_UNUSED: + memcpy(se401->scratch[se401->scratch_next].data, + (unsigned char *)urb->transfer_buffer, length); + se401->scratch[se401->scratch_next].state + = BUFFER_READY; + se401->scratch[se401->scratch_next].offset + = se401->bayeroffset; + se401->scratch[se401->scratch_next].length = length; + if (waitqueue_active(&se401->wq)) + wake_up_interruptible(&se401->wq); + se401->scratch_overflow = 0; + se401->scratch_next++; + if (se401->scratch_next >= SE401_NUMSCRATCH) + se401->scratch_next = 0; + break; } + se401->bayeroffset += length; + if (se401->bayeroffset >= se401->cheight * se401->cwidth) + se401->bayeroffset = 0; } else { se401->nullpackets++; - if (se401->nullpackets > SE401_MAX_NULLPACKETS) { - if (waitqueue_active(&se401->wq)) { + if (se401->nullpackets > SE401_MAX_NULLPACKETS) + if (waitqueue_active(&se401->wq)) wake_up_interruptible(&se401->wq); - } - } } /* Resubmit urb for new data */ - urb->status=0; - urb->dev=se401->dev; - if(usb_submit_urb(urb, GFP_KERNEL)) + urb->status = 0; + urb->dev = se401->dev; + if (usb_submit_urb(urb, GFP_KERNEL)) dev_info(&urb->dev->dev, "urb burned down\n"); return; } static void se401_send_size(struct usb_se401 *se401, int width, int height) { - int i=0; - int mode=0x03; /* No compression */ - int sendheight=height; - int sendwidth=width; + int i = 0; + int mode = 0x03; /* No compression */ + int sendheight = height; + int sendwidth = width; /* JangGu compression can only be used with the camera supported sizes, but bayer seems to work with any size that fits on the sensor. @@ -400,18 +403,21 @@ static void se401_send_size(struct usb_se401 *se401, int width, int height) 4 or 16 times subcapturing, if not we use uncompressed bayer data but this will result in cutouts of the maximum size.... */ - while (i<se401->sizes && !(se401->width[i]==width && se401->height[i]==height)) + while (i < se401->sizes && !(se401->width[i] == width && + se401->height[i] == height)) i++; - while (i<se401->sizes) { - if (se401->width[i]==width*2 && se401->height[i]==height*2) { - sendheight=se401->height[i]; - sendwidth=se401->width[i]; - mode=0x40; + while (i < se401->sizes) { + if (se401->width[i] == width * 2 && + se401->height[i] == height * 2) { + sendheight = se401->height[i]; + sendwidth = se401->width[i]; + mode = 0x40; } - if (se401->width[i]==width*4 && se401->height[i]==height*4) { - sendheight=se401->height[i]; - sendwidth=se401->width[i]; - mode=0x42; + if (se401->width[i] == width * 4 && + se401->height[i] == height * 4) { + sendheight = se401->height[i]; + sendwidth = se401->width[i]; + mode = 0x42; } i++; } @@ -420,13 +426,10 @@ static void se401_send_size(struct usb_se401 *se401, int width, int height) se401_sndctrl(1, se401, SE401_REQ_SET_HEIGHT, sendheight, NULL, 0); se401_set_feature(se401, SE401_OPERATINGMODE, mode); - if (mode==0x03) { - se401->format=FMT_BAYER; - } else { - se401->format=FMT_JANGGU; - } - - return; + if (mode == 0x03) + se401->format = FMT_BAYER; + else + se401->format = FMT_JANGGU; } /* @@ -437,29 +440,31 @@ static void se401_send_size(struct usb_se401 *se401, int width, int height) static int se401_start_stream(struct usb_se401 *se401) { struct urb *urb; - int err=0, i; - se401->streaming=1; + int err = 0, i; + se401->streaming = 1; se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0); se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0); /* Set picture settings */ - se401_set_feature(se401, HV7131_REG_MODE_B, 0x05);/*windowed + pix intg */ + /* windowed + pix intg */ + se401_set_feature(se401, HV7131_REG_MODE_B, 0x05); se401_send_pict(se401); se401_send_size(se401, se401->cwidth, se401->cheight); - se401_sndctrl(1, se401, SE401_REQ_START_CONTINUOUS_CAPTURE, 0, NULL, 0); + se401_sndctrl(1, se401, SE401_REQ_START_CONTINUOUS_CAPTURE, + 0, NULL, 0); /* Do some memory allocation */ - for (i=0; i<SE401_NUMFRAMES; i++) { - se401->frame[i].data=se401->fbuf + i * se401->maxframesize; - se401->frame[i].curpix=0; + for (i = 0; i < SE401_NUMFRAMES; i++) { + se401->frame[i].data = se401->fbuf + i * se401->maxframesize; + se401->frame[i].curpix = 0; } - for (i=0; i<SE401_NUMSBUF; i++) { - se401->sbuf[i].data=kmalloc(SE401_PACKETSIZE, GFP_KERNEL); + for (i = 0; i < SE401_NUMSBUF; i++) { + se401->sbuf[i].data = kmalloc(SE401_PACKETSIZE, GFP_KERNEL); if (!se401->sbuf[i].data) { - for(i = i - 1; i >= 0; i--) { + for (i = i - 1; i >= 0; i--) { kfree(se401->sbuf[i].data); se401->sbuf[i].data = NULL; } @@ -467,26 +472,26 @@ static int se401_start_stream(struct usb_se401 *se401) } } - se401->bayeroffset=0; - se401->scratch_next=0; - se401->scratch_use=0; - se401->scratch_overflow=0; - for (i=0; i<SE401_NUMSCRATCH; i++) { - se401->scratch[i].data=kmalloc(SE401_PACKETSIZE, GFP_KERNEL); + se401->bayeroffset = 0; + se401->scratch_next = 0; + se401->scratch_use = 0; + se401->scratch_overflow = 0; + for (i = 0; i < SE401_NUMSCRATCH; i++) { + se401->scratch[i].data = kmalloc(SE401_PACKETSIZE, GFP_KERNEL); if (!se401->scratch[i].data) { - for(i = i - 1; i >= 0; i--) { + for (i = i - 1; i >= 0; i--) { kfree(se401->scratch[i].data); se401->scratch[i].data = NULL; } goto nomem_sbuf; } - se401->scratch[i].state=BUFFER_UNUSED; + se401->scratch[i].state = BUFFER_UNUSED; } - for (i=0; i<SE401_NUMSBUF; i++) { - urb=usb_alloc_urb(0, GFP_KERNEL); - if(!urb) { - for(i = i - 1; i >= 0; i--) { + for (i = 0; i < SE401_NUMSBUF; i++) { + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + for (i = i - 1; i >= 0; i--) { usb_kill_urb(se401->urb[i]); usb_free_urb(se401->urb[i]); se401->urb[i] = NULL; @@ -500,24 +505,24 @@ static int se401_start_stream(struct usb_se401 *se401) se401_video_irq, se401); - se401->urb[i]=urb; + se401->urb[i] = urb; - err=usb_submit_urb(se401->urb[i], GFP_KERNEL); - if(err) + err = usb_submit_urb(se401->urb[i], GFP_KERNEL); + if (err) err("urb burned down"); } - se401->framecount=0; + se401->framecount = 0; return 0; nomem_scratch: - for (i=0; i<SE401_NUMSCRATCH; i++) { + for (i = 0; i < SE401_NUMSCRATCH; i++) { kfree(se401->scratch[i].data); se401->scratch[i].data = NULL; } nomem_sbuf: - for (i=0; i<SE401_NUMSBUF; i++) { + for (i = 0; i < SE401_NUMSBUF; i++) { kfree(se401->sbuf[i].data); se401->sbuf[i].data = NULL; } @@ -531,22 +536,23 @@ static int se401_stop_stream(struct usb_se401 *se401) if (!se401->streaming || !se401->dev) return 1; - se401->streaming=0; + se401->streaming = 0; se401_sndctrl(1, se401, SE401_REQ_STOP_CONTINUOUS_CAPTURE, 0, NULL, 0); se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 0, NULL, 0); se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 0, NULL, 0); - for (i=0; i<SE401_NUMSBUF; i++) if (se401->urb[i]) { - usb_kill_urb(se401->urb[i]); - usb_free_urb(se401->urb[i]); - se401->urb[i]=NULL; - kfree(se401->sbuf[i].data); - } - for (i=0; i<SE401_NUMSCRATCH; i++) { + for (i = 0; i < SE401_NUMSBUF; i++) + if (se401->urb[i]) { + usb_kill_urb(se401->urb[i]); + usb_free_urb(se401->urb[i]); + se401->urb[i] = NULL; + kfree(se401->sbuf[i].data); + } + for (i = 0; i < SE401_NUMSCRATCH; i++) { kfree(se401->scratch[i].data); - se401->scratch[i].data=NULL; + se401->scratch[i].data = NULL; } return 0; @@ -554,9 +560,9 @@ static int se401_stop_stream(struct usb_se401 *se401) static int se401_set_size(struct usb_se401 *se401, int width, int height) { - int wasstreaming=se401->streaming; + int wasstreaming = se401->streaming; /* Check to see if we need to change */ - if (se401->cwidth==width && se401->cheight==height) + if (se401->cwidth == width && se401->cheight == height) return 0; /* Check for a valid mode */ @@ -564,16 +570,16 @@ static int se401_set_size(struct usb_se401 *se401, int width, int height) return 1; if ((width & 1) || (height & 1)) return 1; - if (width>se401->width[se401->sizes-1]) + if (width > se401->width[se401->sizes-1]) return 1; - if (height>se401->height[se401->sizes-1]) + if (height > se401->height[se401->sizes-1]) return 1; /* Stop a current stream and start it again at the new size */ if (wasstreaming) se401_stop_stream(se401); - se401->cwidth=width; - se401->cheight=height; + se401->cwidth = width; + se401->cheight = height; if (wasstreaming) se401_start_stream(se401); return 0; @@ -594,68 +600,68 @@ static int se401_set_size(struct usb_se401 *se401, int width, int height) static inline void enhance_picture(unsigned char *frame, int len) { while (len--) { - *frame=(((*frame^255)*(*frame^255))/255)^255; + *frame = (((*frame^255)*(*frame^255))/255)^255; frame++; } } static inline void decode_JangGu_integrate(struct usb_se401 *se401, int data) { - struct se401_frame *frame=&se401->frame[se401->curframe]; - int linelength=se401->cwidth*3; + struct se401_frame *frame = &se401->frame[se401->curframe]; + int linelength = se401->cwidth * 3; if (frame->curlinepix >= linelength) { - frame->curlinepix=0; - frame->curline+=linelength; + frame->curlinepix = 0; + frame->curline += linelength; } /* First three are absolute, all others relative. * Format is rgb from right to left (mirrorred image), * we flip it to get bgr from left to right. */ - if (frame->curlinepix < 3) { - *(frame->curline-frame->curlinepix)=1+data*4; - } else { - *(frame->curline-frame->curlinepix)= - *(frame->curline-frame->curlinepix+3)+data*4; - } + if (frame->curlinepix < 3) + *(frame->curline-frame->curlinepix) = 1 + data * 4; + else + *(frame->curline-frame->curlinepix) = + *(frame->curline-frame->curlinepix + 3) + data * 4; frame->curlinepix++; } -static inline void decode_JangGu_vlc (struct usb_se401 *se401, unsigned char *data, int bit_exp, int packetlength) +static inline void decode_JangGu_vlc(struct usb_se401 *se401, + unsigned char *data, int bit_exp, int packetlength) { - int pos=0; - int vlc_cod=0; - int vlc_size=0; - int vlc_data=0; + int pos = 0; + int vlc_cod = 0; + int vlc_size = 0; + int vlc_data = 0; int bit_cur; int bit; - data+=4; + data += 4; while (pos < packetlength) { - bit_cur=8; + bit_cur = 8; while (bit_cur && bit_exp) { - bit=((*data)>>(bit_cur-1))&1; + bit = ((*data) >> (bit_cur-1))&1; if (!vlc_cod) { if (bit) { vlc_size++; } else { - if (!vlc_size) { + if (!vlc_size) decode_JangGu_integrate(se401, 0); - } else { - vlc_cod=2; - vlc_data=0; + else { + vlc_cod = 2; + vlc_data = 0; } } } else { - if (vlc_cod==2) { + if (vlc_cod == 2) { if (!bit) - vlc_data = -(1<<vlc_size) + 1; + vlc_data = -(1 << vlc_size) + 1; vlc_cod--; } vlc_size--; - vlc_data+=bit<<vlc_size; + vlc_data += bit << vlc_size; if (!vlc_size) { decode_JangGu_integrate(se401, vlc_data); - vlc_cod=0; + vlc_cod = 0; } } bit_cur--; @@ -666,186 +672,188 @@ static inline void decode_JangGu_vlc (struct usb_se401 *se401, unsigned char *da } } -static inline void decode_JangGu (struct usb_se401 *se401, struct se401_scratch *buffer) +static inline void decode_JangGu(struct usb_se401 *se401, + struct se401_scratch *buffer) { - unsigned char *data=buffer->data; - int len=buffer->length; - int bit_exp=0, pix_exp=0, frameinfo=0, packetlength=0, size; - int datapos=0; + unsigned char *data = buffer->data; + int len = buffer->length; + int bit_exp = 0, pix_exp = 0, frameinfo = 0, packetlength = 0, size; + int datapos = 0; /* New image? */ if (!se401->frame[se401->curframe].curpix) { - se401->frame[se401->curframe].curlinepix=0; - se401->frame[se401->curframe].curline= + se401->frame[se401->curframe].curlinepix = 0; + se401->frame[se401->curframe].curline = se401->frame[se401->curframe].data+ - se401->cwidth*3-1; - if (se401->frame[se401->curframe].grabstate==FRAME_READY) - se401->frame[se401->curframe].grabstate=FRAME_GRABBING; - se401->vlcdatapos=0; + se401->cwidth * 3 - 1; + if (se401->frame[se401->curframe].grabstate == FRAME_READY) + se401->frame[se401->curframe].grabstate = FRAME_GRABBING; + se401->vlcdatapos = 0; } while (datapos < len) { - size=1024-se401->vlcdatapos; + size = 1024 - se401->vlcdatapos; if (size+datapos > len) - size=len-datapos; + size = len-datapos; memcpy(se401->vlcdata+se401->vlcdatapos, data+datapos, size); - se401->vlcdatapos+=size; - packetlength=0; + se401->vlcdatapos += size; + packetlength = 0; if (se401->vlcdatapos >= 4) { - bit_exp=se401->vlcdata[3]+(se401->vlcdata[2]<<8); - pix_exp=se401->vlcdata[1]+((se401->vlcdata[0]&0x3f)<<8); - frameinfo=se401->vlcdata[0]&0xc0; - packetlength=((bit_exp+47)>>4)<<1; + bit_exp = se401->vlcdata[3] + (se401->vlcdata[2] << 8); + pix_exp = se401->vlcdata[1] + + ((se401->vlcdata[0] & 0x3f) << 8); + frameinfo = se401->vlcdata[0] & 0xc0; + packetlength = ((bit_exp + 47) >> 4) << 1; if (packetlength > 1024) { - se401->vlcdatapos=0; - datapos=len; - packetlength=0; + se401->vlcdatapos = 0; + datapos = len; + packetlength = 0; se401->error++; - se401->frame[se401->curframe].curpix=0; + se401->frame[se401->curframe].curpix = 0; } } if (packetlength && se401->vlcdatapos >= packetlength) { - decode_JangGu_vlc(se401, se401->vlcdata, bit_exp, packetlength); - se401->frame[se401->curframe].curpix+=pix_exp*3; - datapos+=size-(se401->vlcdatapos-packetlength); - se401->vlcdatapos=0; - if (se401->frame[se401->curframe].curpix>=se401->cwidth*se401->cheight*3) { - if (se401->frame[se401->curframe].curpix==se401->cwidth*se401->cheight*3) { - if (se401->frame[se401->curframe].grabstate==FRAME_GRABBING) { - se401->frame[se401->curframe].grabstate=FRAME_DONE; + decode_JangGu_vlc(se401, se401->vlcdata, bit_exp, + packetlength); + se401->frame[se401->curframe].curpix += pix_exp * 3; + datapos += size-(se401->vlcdatapos-packetlength); + se401->vlcdatapos = 0; + if (se401->frame[se401->curframe].curpix >= se401->cwidth * se401->cheight * 3) { + if (se401->frame[se401->curframe].curpix == se401->cwidth * se401->cheight * 3) { + if (se401->frame[se401->curframe].grabstate == FRAME_GRABBING) { + se401->frame[se401->curframe].grabstate = FRAME_DONE; se401->framecount++; se401->readcount++; } - if (se401->frame[(se401->curframe+1)&(SE401_NUMFRAMES-1)].grabstate==FRAME_READY) { - se401->curframe=(se401->curframe+1) & (SE401_NUMFRAMES-1); - } - } else { + if (se401->frame[(se401->curframe + 1) & (SE401_NUMFRAMES - 1)].grabstate == FRAME_READY) + se401->curframe = (se401->curframe + 1) & (SE401_NUMFRAMES - 1); + } else se401->error++; - } - se401->frame[se401->curframe].curpix=0; - datapos=len; + se401->frame[se401->curframe].curpix = 0; + datapos = len; } - } else { - datapos+=size; - } + } else + datapos += size; } } -static inline void decode_bayer (struct usb_se401 *se401, struct se401_scratch *buffer) +static inline void decode_bayer(struct usb_se401 *se401, + struct se401_scratch *buffer) { - unsigned char *data=buffer->data; - int len=buffer->length; - int offset=buffer->offset; - int datasize=se401->cwidth*se401->cheight; - struct se401_frame *frame=&se401->frame[se401->curframe]; + unsigned char *data = buffer->data; + int len = buffer->length; + int offset = buffer->offset; + int datasize = se401->cwidth * se401->cheight; + struct se401_frame *frame = &se401->frame[se401->curframe]; + unsigned char *framedata = frame->data, *curline, *nextline; + int width = se401->cwidth; + int blineoffset = 0, bline; + int linelength = width * 3, i; - unsigned char *framedata=frame->data, *curline, *nextline; - int width=se401->cwidth; - int blineoffset=0, bline; - int linelength=width*3, i; + if (frame->curpix == 0) { + if (frame->grabstate == FRAME_READY) + frame->grabstate = FRAME_GRABBING; - if (frame->curpix==0) { - if (frame->grabstate==FRAME_READY) { - frame->grabstate=FRAME_GRABBING; - } - frame->curline=framedata+linelength; - frame->curlinepix=0; + frame->curline = framedata + linelength; + frame->curlinepix = 0; } - if (offset!=frame->curpix) { + if (offset != frame->curpix) { /* Regard frame as lost :( */ - frame->curpix=0; + frame->curpix = 0; se401->error++; return; } /* Check if we have to much data */ - if (frame->curpix+len > datasize) { - len=datasize-frame->curpix; - } - if (se401->cheight%4) - blineoffset=1; - bline=frame->curpix/se401->cwidth+blineoffset; - - curline=frame->curline; - nextline=curline+linelength; - if (nextline >= framedata+datasize*3) - nextline=curline; + if (frame->curpix + len > datasize) + len = datasize-frame->curpix; + + if (se401->cheight % 4) + blineoffset = 1; + bline = frame->curpix / se401->cwidth+blineoffset; + + curline = frame->curline; + nextline = curline + linelength; + if (nextline >= framedata+datasize * 3) + nextline = curline; while (len) { - if (frame->curlinepix>=width) { - frame->curlinepix-=width; - bline=frame->curpix/width+blineoffset; - curline+=linelength*2; - nextline+=linelength*2; - if (curline >= framedata+datasize*3) { + if (frame->curlinepix >= width) { + frame->curlinepix -= width; + bline = frame->curpix / width + blineoffset; + curline += linelength*2; + nextline += linelength*2; + if (curline >= framedata+datasize * 3) { frame->curlinepix++; - curline-=3; - nextline-=3; + curline -= 3; + nextline -= 3; len--; data++; frame->curpix++; } if (nextline >= framedata+datasize*3) - nextline=curline; + nextline = curline; } - if ((bline&1)) { - if ((frame->curlinepix&1)) { - *(curline+2)=*data; - *(curline-1)=*data; - *(nextline+2)=*data; - *(nextline-1)=*data; + if (bline & 1) { + if (frame->curlinepix & 1) { + *(curline + 2) = *data; + *(curline - 1) = *data; + *(nextline + 2) = *data; + *(nextline - 1) = *data; } else { - *(curline+1)= - (*(curline+1)+*data)/2; - *(curline-2)= - (*(curline-2)+*data)/2; - *(nextline+1)=*data; - *(nextline-2)=*data; + *(curline + 1) = + (*(curline + 1) + *data) / 2; + *(curline-2) = + (*(curline - 2) + *data) / 2; + *(nextline + 1) = *data; + *(nextline - 2) = *data; } } else { - if ((frame->curlinepix&1)) { - *(curline+1)= - (*(curline+1)+*data)/2; - *(curline-2)= - (*(curline-2)+*data)/2; - *(nextline+1)=*data; - *(nextline-2)=*data; + if (frame->curlinepix & 1) { + *(curline + 1) = + (*(curline + 1) + *data) / 2; + *(curline - 2) = + (*(curline - 2) + *data) / 2; + *(nextline + 1) = *data; + *(nextline - 2) = *data; } else { - *curline=*data; - *(curline-3)=*data; - *nextline=*data; - *(nextline-3)=*data; + *curline = *data; + *(curline - 3) = *data; + *nextline = *data; + *(nextline - 3) = *data; } } frame->curlinepix++; - curline-=3; - nextline-=3; + curline -= 3; + nextline -= 3; len--; data++; frame->curpix++; } - frame->curline=curline; + frame->curline = curline; - if (frame->curpix>=datasize) { + if (frame->curpix >= datasize) { /* Fix the top line */ - framedata+=linelength; - for (i=0; i<linelength; i++) { + framedata += linelength; + for (i = 0; i < linelength; i++) { framedata--; - *framedata=*(framedata+linelength); + *framedata = *(framedata + linelength); } /* Fix the left side (green is already present) */ - for (i=0; i<se401->cheight; i++) { - *framedata=*(framedata+3); - *(framedata+1)=*(framedata+4); - *(framedata+2)=*(framedata+5); - framedata+=linelength; + for (i = 0; i < se401->cheight; i++) { + *framedata = *(framedata + 3); + *(framedata + 1) = *(framedata + 4); + *(framedata + 2) = *(framedata + 5); + framedata += linelength; } - frame->curpix=0; - frame->grabstate=FRAME_DONE; + frame->curpix = 0; + frame->grabstate = FRAME_DONE; se401->framecount++; se401->readcount++; - if (se401->frame[(se401->curframe+1)&(SE401_NUMFRAMES-1)].grabstate==FRAME_READY) { - se401->curframe=(se401->curframe+1) & (SE401_NUMFRAMES-1); + if (se401->frame[(se401->curframe + 1) & + (SE401_NUMFRAMES - 1)].grabstate == FRAME_READY) { + se401->curframe = (se401->curframe+1) & + (SE401_NUMFRAMES-1); } } } @@ -853,72 +861,76 @@ static inline void decode_bayer (struct usb_se401 *se401, struct se401_scratch * static int se401_newframe(struct usb_se401 *se401, int framenr) { DECLARE_WAITQUEUE(wait, current); - int errors=0; + int errors = 0; while (se401->streaming && - (se401->frame[framenr].grabstate==FRAME_READY || - se401->frame[framenr].grabstate==FRAME_GRABBING) ) { - if(!se401->frame[framenr].curpix) { + (se401->frame[framenr].grabstate == FRAME_READY || + se401->frame[framenr].grabstate == FRAME_GRABBING)) { + if (!se401->frame[framenr].curpix) errors++; - } + wait_interruptible( - se401->scratch[se401->scratch_use].state!=BUFFER_READY, - &se401->wq, - &wait - ); + se401->scratch[se401->scratch_use].state != BUFFER_READY, + &se401->wq, &wait); if (se401->nullpackets > SE401_MAX_NULLPACKETS) { - se401->nullpackets=0; + se401->nullpackets = 0; dev_info(&se401->dev->dev, - "too many null length packets, restarting capture\n"); + "too many null length packets, restarting capture\n"); se401_stop_stream(se401); se401_start_stream(se401); } else { - if (se401->scratch[se401->scratch_use].state!=BUFFER_READY) { - se401->frame[framenr].grabstate=FRAME_ERROR; + if (se401->scratch[se401->scratch_use].state != + BUFFER_READY) { + se401->frame[framenr].grabstate = FRAME_ERROR; return -EIO; } - se401->scratch[se401->scratch_use].state=BUFFER_BUSY; - if (se401->format==FMT_JANGGU) { - decode_JangGu(se401, &se401->scratch[se401->scratch_use]); - } else { - decode_bayer(se401, &se401->scratch[se401->scratch_use]); - } - se401->scratch[se401->scratch_use].state=BUFFER_UNUSED; + se401->scratch[se401->scratch_use].state = BUFFER_BUSY; + if (se401->format == FMT_JANGGU) + decode_JangGu(se401, + &se401->scratch[se401->scratch_use]); + else + decode_bayer(se401, + &se401->scratch[se401->scratch_use]); + + se401->scratch[se401->scratch_use].state = + BUFFER_UNUSED; se401->scratch_use++; - if (se401->scratch_use>=SE401_NUMSCRATCH) - se401->scratch_use=0; + if (se401->scratch_use >= SE401_NUMSCRATCH) + se401->scratch_use = 0; if (errors > SE401_MAX_ERRORS) { - errors=0; + errors = 0; dev_info(&se401->dev->dev, - "too many errors, restarting capture\n"); + "too many errors, restarting capture\n"); se401_stop_stream(se401); se401_start_stream(se401); } } } - if (se401->frame[framenr].grabstate==FRAME_DONE) + if (se401->frame[framenr].grabstate == FRAME_DONE) if (se401->enhance) - enhance_picture(se401->frame[framenr].data, se401->cheight*se401->cwidth*3); + enhance_picture(se401->frame[framenr].data, + se401->cheight * se401->cwidth * 3); return 0; } -static void usb_se401_remove_disconnected (struct usb_se401 *se401) +static void usb_se401_remove_disconnected(struct usb_se401 *se401) { int i; se401->dev = NULL; - for (i=0; i<SE401_NUMSBUF; i++) + for (i = 0; i < SE401_NUMSBUF; i++) if (se401->urb[i]) { usb_kill_urb(se401->urb[i]); usb_free_urb(se401->urb[i]); se401->urb[i] = NULL; kfree(se401->sbuf[i].data); } - for (i=0; i<SE401_NUMSCRATCH; i++) { + + for (i = 0; i < SE401_NUMSCRATCH; i++) kfree(se401->scratch[i].data); - } + if (se401->inturb) { usb_kill_urb(se401->inturb); usb_free_urb(se401->inturb); @@ -973,11 +985,11 @@ static int se401_close(struct file *file) dev_info(&se401->dev->dev, "device unregistered\n"); usb_se401_remove_disconnected(se401); } else { - for (i=0; i<SE401_NUMFRAMES; i++) - se401->frame[i].grabstate=FRAME_UNUSED; + for (i = 0; i < SE401_NUMFRAMES; i++) + se401->frame[i].grabstate = FRAME_UNUSED; if (se401->streaming) se401_stop_stream(se401); - se401->user=0; + se401->user = 0; } file->private_data = NULL; return 0; @@ -1073,7 +1085,7 @@ static long se401_do_ioctl(struct file *file, unsigned int cmd, void *arg) memset(vm, 0, sizeof(*vm)); vm->size = SE401_NUMFRAMES * se401->maxframesize; vm->frames = SE401_NUMFRAMES; - for (i=0; i<SE401_NUMFRAMES; i++) + for (i = 0; i < SE401_NUMFRAMES; i++) vm->offsets[i] = se401->maxframesize * i; return 0; } @@ -1091,16 +1103,16 @@ static long se401_do_ioctl(struct file *file, unsigned int cmd, void *arg) /* Is this according to the v4l spec??? */ if (se401_set_size(se401, vm->width, vm->height)) return -EINVAL; - se401->frame[vm->frame].grabstate=FRAME_READY; + se401->frame[vm->frame].grabstate = FRAME_READY; if (!se401->streaming) se401_start_stream(se401); /* Set the picture properties */ - if (se401->framecount==0) + if (se401->framecount == 0) se401_send_pict(se401); /* Calibrate the reset level after a few frames. */ - if (se401->framecount%20==1) + if (se401->framecount % 20 == 1) se401_auto_resetlevel(se401); return 0; @@ -1108,13 +1120,13 @@ static long se401_do_ioctl(struct file *file, unsigned int cmd, void *arg) case VIDIOCSYNC: { int *frame = arg; - int ret=0; + int ret = 0; - if(*frame <0 || *frame >= SE401_NUMFRAMES) + if (*frame < 0 || *frame >= SE401_NUMFRAMES) return -EINVAL; - ret=se401_newframe(se401, *frame); - se401->frame[*frame].grabstate=FRAME_UNUSED; + ret = se401_newframe(se401, *frame); + se401->frame[*frame].grabstate = FRAME_UNUSED; return ret; } case VIDIOCGFBUF: @@ -1155,36 +1167,36 @@ static long se401_ioctl(struct file *file, static ssize_t se401_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { - int realcount=count, ret=0; + int realcount = count, ret = 0; struct video_device *dev = file->private_data; struct usb_se401 *se401 = (struct usb_se401 *)dev; - if (se401->dev == NULL) + if (se401->dev == NULL) return -EIO; if (realcount > se401->cwidth*se401->cheight*3) - realcount=se401->cwidth*se401->cheight*3; + realcount = se401->cwidth*se401->cheight*3; /* Shouldn't happen: */ - if (se401->frame[0].grabstate==FRAME_GRABBING) + if (se401->frame[0].grabstate == FRAME_GRABBING) return -EBUSY; - se401->frame[0].grabstate=FRAME_READY; - se401->frame[1].grabstate=FRAME_UNUSED; - se401->curframe=0; + se401->frame[0].grabstate = FRAME_READY; + se401->frame[1].grabstate = FRAME_UNUSED; + se401->curframe = 0; if (!se401->streaming) se401_start_stream(se401); /* Set the picture properties */ - if (se401->framecount==0) + if (se401->framecount == 0) se401_send_pict(se401); /* Calibrate the reset level after a few frames. */ - if (se401->framecount%20==1) + if (se401->framecount%20 == 1) se401_auto_resetlevel(se401); - ret=se401_newframe(se401, 0); + ret = se401_newframe(se401, 0); - se401->frame[0].grabstate=FRAME_UNUSED; + se401->frame[0].grabstate = FRAME_UNUSED; if (ret) return ret; if (copy_to_user(buf, se401->frame[0].data, realcount)) @@ -1203,11 +1215,12 @@ static int se401_mmap(struct file *file, struct vm_area_struct *vma) mutex_lock(&se401->lock); - if (se401->dev == NULL) { + if (se401->dev == NULL) { mutex_unlock(&se401->lock); return -EIO; } - if (size > (((SE401_NUMFRAMES * se401->maxframesize) + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))) { + if (size > (((SE401_NUMFRAMES * se401->maxframesize) + PAGE_SIZE - 1) + & ~(PAGE_SIZE - 1))) { mutex_unlock(&se401->lock); return -EINVAL; } @@ -1218,10 +1231,10 @@ static int se401_mmap(struct file *file, struct vm_area_struct *vma) mutex_unlock(&se401->lock); return -EAGAIN; } - start += PAGE_SIZE; - pos += PAGE_SIZE; + start += PAGE_SIZE; + pos += PAGE_SIZE; if (size > PAGE_SIZE) - size -= PAGE_SIZE; + size -= PAGE_SIZE; else size = 0; } @@ -1231,7 +1244,7 @@ static int se401_mmap(struct file *file, struct vm_area_struct *vma) } static const struct v4l2_file_operations se401_fops = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, .open = se401_open, .release = se401_close, .read = se401_read, @@ -1249,7 +1262,7 @@ static struct video_device se401_template = { /***************************/ static int se401_init(struct usb_se401 *se401, int button) { - int i=0, rc; + int i = 0, rc; unsigned char cp[0x40]; char temp[200]; int slen; @@ -1258,64 +1271,67 @@ static int se401_init(struct usb_se401 *se401, int button) se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0); /* get camera descriptor */ - rc=se401_sndctrl(0, se401, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0, cp, sizeof(cp)); + rc = se401_sndctrl(0, se401, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0, + cp, sizeof(cp)); if (cp[1] != 0x41) { err("Wrong descriptor type"); return 1; } slen = snprintf(temp, 200, "ExtraFeatures: %d", cp[3]); - se401->sizes=cp[4]+cp[5]*256; - se401->width=kmalloc(se401->sizes*sizeof(int), GFP_KERNEL); + se401->sizes = cp[4] + cp[5] * 256; + se401->width = kmalloc(se401->sizes*sizeof(int), GFP_KERNEL); if (!se401->width) return 1; - se401->height=kmalloc(se401->sizes*sizeof(int), GFP_KERNEL); + se401->height = kmalloc(se401->sizes*sizeof(int), GFP_KERNEL); if (!se401->height) { kfree(se401->width); return 1; } - for (i=0; i<se401->sizes; i++) { - se401->width[i]=cp[6+i*4+0]+cp[6+i*4+1]*256; - se401->height[i]=cp[6+i*4+2]+cp[6+i*4+3]*256; + for (i = 0; i < se401->sizes; i++) { + se401->width[i] = cp[6 + i * 4 + 0] + cp[6 + i*4 + 1] * 256; + se401->height[i] = cp[6 + i * 4 + 2] + cp[6 + i * 4 + 3] * 256; } - slen += snprintf (temp + slen, 200 - slen, " Sizes:"); - for (i=0; i<se401->sizes; i++) { - slen += snprintf(temp + slen, 200 - slen, + slen += snprintf(temp + slen, 200 - slen, " Sizes:"); + for (i = 0; i < se401->sizes; i++) { + slen += snprintf(temp + slen, 200 - slen, " %dx%d", se401->width[i], se401->height[i]); } dev_info(&se401->dev->dev, "%s\n", temp); - se401->maxframesize=se401->width[se401->sizes-1]*se401->height[se401->sizes-1]*3; + se401->maxframesize = se401->width[se401->sizes-1] * + se401->height[se401->sizes - 1] * 3; - rc=se401_sndctrl(0, se401, SE401_REQ_GET_WIDTH, 0, cp, sizeof(cp)); - se401->cwidth=cp[0]+cp[1]*256; - rc=se401_sndctrl(0, se401, SE401_REQ_GET_HEIGHT, 0, cp, sizeof(cp)); - se401->cheight=cp[0]+cp[1]*256; + rc = se401_sndctrl(0, se401, SE401_REQ_GET_WIDTH, 0, cp, sizeof(cp)); + se401->cwidth = cp[0]+cp[1]*256; + rc = se401_sndctrl(0, se401, SE401_REQ_GET_HEIGHT, 0, cp, sizeof(cp)); + se401->cheight = cp[0]+cp[1]*256; if (!(cp[2] & SE401_FORMAT_BAYER)) { err("Bayer format not supported!"); return 1; } /* set output mode (BAYER) */ - se401_sndctrl(1, se401, SE401_REQ_SET_OUTPUT_MODE, SE401_FORMAT_BAYER, NULL, 0); + se401_sndctrl(1, se401, SE401_REQ_SET_OUTPUT_MODE, + SE401_FORMAT_BAYER, NULL, 0); - rc=se401_sndctrl(0, se401, SE401_REQ_GET_BRT, 0, cp, sizeof(cp)); - se401->brightness=cp[0]+cp[1]*256; + rc = se401_sndctrl(0, se401, SE401_REQ_GET_BRT, 0, cp, sizeof(cp)); + se401->brightness = cp[0]+cp[1]*256; /* some default values */ - se401->resetlevel=0x2d; - se401->rgain=0x20; - se401->ggain=0x20; - se401->bgain=0x20; + se401->resetlevel = 0x2d; + se401->rgain = 0x20; + se401->ggain = 0x20; + se401->bgain = 0x20; se401_set_exposure(se401, 20000); - se401->palette=VIDEO_PALETTE_RGB24; - se401->enhance=1; - se401->dropped=0; - se401->error=0; - se401->framecount=0; - se401->readcount=0; + se401->palette = VIDEO_PALETTE_RGB24; + se401->enhance = 1; + se401->dropped = 0; + se401->error = 0; + se401->framecount = 0; + se401->readcount = 0; /* Start interrupt transfers for snapshot button */ if (button) { - se401->inturb=usb_alloc_urb(0, GFP_KERNEL); + se401->inturb = usb_alloc_urb(0, GFP_KERNEL); if (!se401->inturb) { dev_info(&se401->dev->dev, "Allocation of inturb failed\n"); @@ -1333,7 +1349,7 @@ static int se401_init(struct usb_se401 *se401, int button) return 1; } } else - se401->inturb=NULL; + se401->inturb = NULL; /* Flash the led */ se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0); @@ -1350,8 +1366,8 @@ static int se401_probe(struct usb_interface *intf, struct usb_device *dev = interface_to_usbdev(intf); struct usb_interface_descriptor *interface; struct usb_se401 *se401; - char *camera_name=NULL; - int button=1; + char *camera_name = NULL; + int button = 1; /* We don't handle multi-config cameras */ if (dev->descriptor.bNumConfigurations != 1) @@ -1360,22 +1376,22 @@ static int se401_probe(struct usb_interface *intf, interface = &intf->cur_altsetting->desc; /* Is it an se401? */ - if (le16_to_cpu(dev->descriptor.idVendor) == 0x03e8 && - le16_to_cpu(dev->descriptor.idProduct) == 0x0004) { - camera_name="Endpoints/Aox SE401"; - } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x0471 && - le16_to_cpu(dev->descriptor.idProduct) == 0x030b) { - camera_name="Philips PCVC665K"; - } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d && - le16_to_cpu(dev->descriptor.idProduct) == 0x5001) { - camera_name="Kensington VideoCAM 67014"; - } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d && - le16_to_cpu(dev->descriptor.idProduct) == 0x5002) { - camera_name="Kensington VideoCAM 6701(5/7)"; - } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d && - le16_to_cpu(dev->descriptor.idProduct) == 0x5003) { - camera_name="Kensington VideoCAM 67016"; - button=0; + if (le16_to_cpu(dev->descriptor.idVendor) == 0x03e8 && + le16_to_cpu(dev->descriptor.idProduct) == 0x0004) { + camera_name = "Endpoints/Aox SE401"; + } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x0471 && + le16_to_cpu(dev->descriptor.idProduct) == 0x030b) { + camera_name = "Philips PCVC665K"; + } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d && + le16_to_cpu(dev->descriptor.idProduct) == 0x5001) { + camera_name = "Kensington VideoCAM 67014"; + } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d && + le16_to_cpu(dev->descriptor.idProduct) == 0x5002) { + camera_name = "Kensington VideoCAM 6701(5/7)"; + } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d && + le16_to_cpu(dev->descriptor.idProduct) == 0x5003) { + camera_name = "Kensington VideoCAM 67016"; + button = 0; } else return -ENODEV; @@ -1388,7 +1404,8 @@ static int se401_probe(struct usb_interface *intf, /* We found one */ dev_info(&intf->dev, "SE401 camera found: %s\n", camera_name); - if ((se401 = kzalloc(sizeof(*se401), GFP_KERNEL)) == NULL) { + se401 = kzalloc(sizeof(*se401), GFP_KERNEL); + if (se401 == NULL) { err("couldn't kmalloc se401 struct"); return -ENOMEM; } @@ -1406,12 +1423,14 @@ static int se401_probe(struct usb_interface *intf, } memcpy(&se401->vdev, &se401_template, sizeof(se401_template)); - memcpy(se401->vdev.name, se401->camera_name, strlen(se401->camera_name)); + memcpy(se401->vdev.name, se401->camera_name, + strlen(se401->camera_name)); init_waitqueue_head(&se401->wq); mutex_init(&se401->lock); wmb(); - if (video_register_device(&se401->vdev, VFL_TYPE_GRABBER, video_nr) < 0) { + if (video_register_device(&se401->vdev, + VFL_TYPE_GRABBER, video_nr) < 0) { kfree(se401); err("video_register_device failed"); return -EIO; @@ -1419,20 +1438,20 @@ static int se401_probe(struct usb_interface *intf, dev_info(&intf->dev, "registered new video device: video%d\n", se401->vdev.num); - usb_set_intfdata (intf, se401); + usb_set_intfdata(intf, se401); return 0; } static void se401_disconnect(struct usb_interface *intf) { - struct usb_se401 *se401 = usb_get_intfdata (intf); + struct usb_se401 *se401 = usb_get_intfdata(intf); - usb_set_intfdata (intf, NULL); + usb_set_intfdata(intf, NULL); if (se401) { video_unregister_device(&se401->vdev); - if (!se401->user){ + if (!se401->user) usb_se401_remove_disconnected(se401); - } else { + else { se401->frame[0].grabstate = FRAME_ERROR; se401->frame[0].grabstate = FRAME_ERROR; @@ -1445,10 +1464,10 @@ static void se401_disconnect(struct usb_interface *intf) } static struct usb_driver se401_driver = { - .name = "se401", - .id_table = device_table, - .probe = se401_probe, - .disconnect = se401_disconnect, + .name = "se401", + .id_table = device_table, + .probe = se401_probe, + .disconnect = se401_disconnect, }; @@ -1461,9 +1480,10 @@ static struct usb_driver se401_driver = { static int __init usb_se401_init(void) { - printk(KERN_INFO "SE401 usb camera driver version %s registering\n", version); + printk(KERN_INFO "SE401 usb camera driver version %s registering\n", + version); if (flickerless) - if (flickerless!=50 && flickerless!=60) { + if (flickerless != 50 && flickerless != 60) { printk(KERN_ERR "Invallid flickerless value, use 0, 50 or 60.\n"); return -1; } diff --git a/linux/drivers/media/video/se401.h b/linux/drivers/media/video/se401.h index 0be02c48b..00f0ddbf4 100644 --- a/linux/drivers/media/video/se401.h +++ b/linux/drivers/media/video/se401.h @@ -2,7 +2,7 @@ #ifndef __LINUX_se401_H #define __LINUX_se401_H -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include "compat.h" #include <linux/videodev.h> #include <media/v4l2-common.h> @@ -13,9 +13,10 @@ #ifdef se401_DEBUG # define PDEBUG(level, fmt, args...) \ -if (debug >= level) info("[" __PRETTY_FUNCTION__ ":%d] " fmt, __LINE__ , ## args) +if (debug >= level) \ + info("[" __PRETTY_FUNCTION__ ":%d] " fmt, __LINE__ , ## args) #else -# define PDEBUG(level, fmt, args...) do {} while(0) +# define PDEBUG(level, fmt, args...) do {} while (0) #endif /* An almost drop-in replacement for sleep_on_interruptible */ diff --git a/linux/drivers/media/video/soc_camera.c b/linux/drivers/media/video/soc_camera.c index 822052b25..4f315c1b7 100644 --- a/linux/drivers/media/video/soc_camera.c +++ b/linux/drivers/media/video/soc_camera.c @@ -238,11 +238,11 @@ static int soc_camera_init_user_formats(struct soc_camera_device *icd) return -ENOMEM; icd->num_user_formats = fmts; - fmts = 0; dev_dbg(&icd->dev, "Found %d supported formats.\n", fmts); /* Second pass - actually fill data formats */ + fmts = 0; for (i = 0; i < icd->num_formats; i++) if (!ici->ops->get_formats) { icd->user_formats[i].host_fmt = icd->formats + i; @@ -878,8 +878,11 @@ static int soc_camera_probe(struct device *dev) (unsigned short)~0; ret = soc_camera_init_user_formats(icd); - if (ret < 0) + if (ret < 0) { + if (icd->ops->remove) + icd->ops->remove(icd); goto eiufmt; + } icd->height = DEFAULT_HEIGHT; icd->width = DEFAULT_WIDTH; @@ -903,8 +906,10 @@ static int soc_camera_remove(struct device *dev) { struct soc_camera_device *icd = to_soc_camera_dev(dev); + mutex_lock(&icd->video_lock); if (icd->ops->remove) icd->ops->remove(icd); + mutex_unlock(&icd->video_lock); soc_camera_free_user_formats(icd); @@ -1146,6 +1151,7 @@ evidallocd: } EXPORT_SYMBOL(soc_camera_video_start); +/* Called from client .remove() methods with .video_lock held */ void soc_camera_video_stop(struct soc_camera_device *icd) { struct video_device *vdev = icd->vdev; @@ -1155,10 +1161,8 @@ void soc_camera_video_stop(struct soc_camera_device *icd) if (!icd->dev.parent || !vdev) return; - mutex_lock(&icd->video_lock); video_unregister_device(vdev); icd->vdev = NULL; - mutex_unlock(&icd->video_lock); } EXPORT_SYMBOL(soc_camera_video_stop); @@ -1206,7 +1210,7 @@ static int __devexit soc_camera_pdrv_remove(struct platform_device *pdev) static struct platform_driver __refdata soc_camera_pdrv = { .probe = soc_camera_pdrv_probe, - .remove = __exit_p(soc_camera_pdrv_remove), + .remove = __devexit_p(soc_camera_pdrv_remove), .driver = { .name = "soc-camera-pdrv", .owner = THIS_MODULE, diff --git a/linux/drivers/media/video/tcm825x.c b/linux/drivers/media/video/tcm825x.c index 559ade821..d778c41ef 100644 --- a/linux/drivers/media/video/tcm825x.c +++ b/linux/drivers/media/video/tcm825x.c @@ -882,7 +882,7 @@ static int tcm825x_probe(struct i2c_client *client, return rval; } -static int __exit tcm825x_remove(struct i2c_client *client) +static int tcm825x_remove(struct i2c_client *client) { struct tcm825x_sensor *sensor = i2c_get_clientdata(client); @@ -908,7 +908,7 @@ static struct i2c_driver tcm825x_i2c_driver = { .name = TCM825X_NAME, }, .probe = tcm825x_probe, - .remove = __exit_p(tcm825x_remove), + .remove = tcm825x_remove, #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26) .id_table = tcm825x_id, #endif diff --git a/linux/drivers/media/video/tvp514x.c b/linux/drivers/media/video/tvp514x.c index 3750f7fad..244372627 100644 --- a/linux/drivers/media/video/tvp514x.c +++ b/linux/drivers/media/video/tvp514x.c @@ -31,7 +31,10 @@ #include <linux/i2c.h> #include <linux/delay.h> #include <linux/videodev2.h> -#include <media/v4l2-int-device.h> + +#include <media/v4l2-device.h> +#include <media/v4l2-common.h> +#include <media/v4l2-chip-ident.h> #include <media/tvp514x.h> #include "tvp514x_regs.h" @@ -49,15 +52,11 @@ static int debug; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dump_reg(client, reg, val) \ - do { \ - val = tvp514x_read_reg(client, reg); \ - v4l_info(client, "Reg(0x%.2X): 0x%.2X\n", reg, val); \ - } while (0) +MODULE_AUTHOR("Texas Instruments"); +MODULE_DESCRIPTION("TVP514X linux decoder driver"); +MODULE_LICENSE("GPL"); -/** - * enum tvp514x_std - enum for supported standards - */ +/* enum tvp514x_std - enum for supported standards */ enum tvp514x_std { STD_NTSC_MJ = 0, STD_PAL_BDGHIN, @@ -65,14 +64,6 @@ enum tvp514x_std { }; /** - * enum tvp514x_state - enum for different decoder states - */ -enum tvp514x_state { - STATE_NOT_DETECTED, - STATE_DETECTED -}; - -/** * struct tvp514x_std_info - Structure to store standard informations * @width: Line width in pixels * @height:Number of active lines @@ -89,33 +80,27 @@ struct tvp514x_std_info { static struct tvp514x_reg tvp514x_reg_list_default[0x40]; /** * struct tvp514x_decoder - TVP5146/47 decoder object - * @v4l2_int_device: Slave handle - * @tvp514x_slave: Slave pointer which is used by @v4l2_int_device + * @sd: Subdevice Slave handle * @tvp514x_regs: copy of hw's regs with preset values. * @pdata: Board specific - * @client: I2C client data - * @id: Entry from I2C table * @ver: Chip version - * @state: TVP5146/47 decoder state - detected or not-detected + * @streaming: TVP5146/47 decoder streaming - enabled or disabled. * @pix: Current pixel format * @num_fmts: Number of formats * @fmt_list: Format list * @current_std: Current standard * @num_stds: Number of standards * @std_list: Standards list - * @route: input and output routing at chip level + * @input: Input routing at chip level + * @output: Output routing at chip level */ struct tvp514x_decoder { - struct v4l2_int_device v4l2_int_device; - struct v4l2_int_slave tvp514x_slave; + struct v4l2_subdev sd; struct tvp514x_reg tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)]; const struct tvp514x_platform_data *pdata; - struct i2c_client *client; - - struct i2c_device_id *id; int ver; - enum tvp514x_state state; + int streaming; struct v4l2_pix_format pix; int num_fmts; @@ -124,15 +109,18 @@ struct tvp514x_decoder { enum tvp514x_std current_std; int num_stds; struct tvp514x_std_info *std_list; - - struct v4l2_routing route; + /* Input and Output Routing parameters */ + u32 input; + u32 output; }; /* TVP514x default register values */ static struct tvp514x_reg tvp514x_reg_list_default[] = { - {TOK_WRITE, REG_INPUT_SEL, 0x05}, /* Composite selected */ + /* Composite selected */ + {TOK_WRITE, REG_INPUT_SEL, 0x05}, {TOK_WRITE, REG_AFE_GAIN_CTRL, 0x0F}, - {TOK_WRITE, REG_VIDEO_STD, 0x00}, /* Auto mode */ + /* Auto mode */ + {TOK_WRITE, REG_VIDEO_STD, 0x00}, {TOK_WRITE, REG_OPERATION_MODE, 0x00}, {TOK_SKIP, REG_AUTOSWITCH_MASK, 0x3F}, {TOK_WRITE, REG_COLOR_KILLER, 0x10}, @@ -145,53 +133,74 @@ static struct tvp514x_reg tvp514x_reg_list_default[] = { {TOK_WRITE, REG_HUE, 0x00}, {TOK_WRITE, REG_CHROMA_CONTROL1, 0x00}, {TOK_WRITE, REG_CHROMA_CONTROL2, 0x0E}, - {TOK_SKIP, 0x0F, 0x00}, /* Reserved */ + /* Reserved */ + {TOK_SKIP, 0x0F, 0x00}, {TOK_WRITE, REG_COMP_PR_SATURATION, 0x80}, {TOK_WRITE, REG_COMP_Y_CONTRAST, 0x80}, {TOK_WRITE, REG_COMP_PB_SATURATION, 0x80}, - {TOK_SKIP, 0x13, 0x00}, /* Reserved */ + /* Reserved */ + {TOK_SKIP, 0x13, 0x00}, {TOK_WRITE, REG_COMP_Y_BRIGHTNESS, 0x80}, - {TOK_SKIP, 0x15, 0x00}, /* Reserved */ - {TOK_SKIP, REG_AVID_START_PIXEL_LSB, 0x55}, /* NTSC timing */ + /* Reserved */ + {TOK_SKIP, 0x15, 0x00}, + /* NTSC timing */ + {TOK_SKIP, REG_AVID_START_PIXEL_LSB, 0x55}, {TOK_SKIP, REG_AVID_START_PIXEL_MSB, 0x00}, {TOK_SKIP, REG_AVID_STOP_PIXEL_LSB, 0x25}, {TOK_SKIP, REG_AVID_STOP_PIXEL_MSB, 0x03}, - {TOK_SKIP, REG_HSYNC_START_PIXEL_LSB, 0x00}, /* NTSC timing */ + /* NTSC timing */ + {TOK_SKIP, REG_HSYNC_START_PIXEL_LSB, 0x00}, {TOK_SKIP, REG_HSYNC_START_PIXEL_MSB, 0x00}, {TOK_SKIP, REG_HSYNC_STOP_PIXEL_LSB, 0x40}, {TOK_SKIP, REG_HSYNC_STOP_PIXEL_MSB, 0x00}, - {TOK_SKIP, REG_VSYNC_START_LINE_LSB, 0x04}, /* NTSC timing */ + /* NTSC timing */ + {TOK_SKIP, REG_VSYNC_START_LINE_LSB, 0x04}, {TOK_SKIP, REG_VSYNC_START_LINE_MSB, 0x00}, {TOK_SKIP, REG_VSYNC_STOP_LINE_LSB, 0x07}, {TOK_SKIP, REG_VSYNC_STOP_LINE_MSB, 0x00}, - {TOK_SKIP, REG_VBLK_START_LINE_LSB, 0x01}, /* NTSC timing */ + /* NTSC timing */ + {TOK_SKIP, REG_VBLK_START_LINE_LSB, 0x01}, {TOK_SKIP, REG_VBLK_START_LINE_MSB, 0x00}, {TOK_SKIP, REG_VBLK_STOP_LINE_LSB, 0x15}, {TOK_SKIP, REG_VBLK_STOP_LINE_MSB, 0x00}, - {TOK_SKIP, 0x26, 0x00}, /* Reserved */ - {TOK_SKIP, 0x27, 0x00}, /* Reserved */ + /* Reserved */ + {TOK_SKIP, 0x26, 0x00}, + /* Reserved */ + {TOK_SKIP, 0x27, 0x00}, {TOK_SKIP, REG_FAST_SWTICH_CONTROL, 0xCC}, - {TOK_SKIP, 0x29, 0x00}, /* Reserved */ + /* Reserved */ + {TOK_SKIP, 0x29, 0x00}, {TOK_SKIP, REG_FAST_SWTICH_SCART_DELAY, 0x00}, - {TOK_SKIP, 0x2B, 0x00}, /* Reserved */ + /* Reserved */ + {TOK_SKIP, 0x2B, 0x00}, {TOK_SKIP, REG_SCART_DELAY, 0x00}, {TOK_SKIP, REG_CTI_DELAY, 0x00}, {TOK_SKIP, REG_CTI_CONTROL, 0x00}, - {TOK_SKIP, 0x2F, 0x00}, /* Reserved */ - {TOK_SKIP, 0x30, 0x00}, /* Reserved */ - {TOK_SKIP, 0x31, 0x00}, /* Reserved */ - {TOK_WRITE, REG_SYNC_CONTROL, 0x00}, /* HS, VS active high */ - {TOK_WRITE, REG_OUTPUT_FORMATTER1, 0x00}, /* 10-bit BT.656 */ - {TOK_WRITE, REG_OUTPUT_FORMATTER2, 0x11}, /* Enable clk & data */ - {TOK_WRITE, REG_OUTPUT_FORMATTER3, 0xEE}, /* Enable AVID & FLD */ - {TOK_WRITE, REG_OUTPUT_FORMATTER4, 0xAF}, /* Enable VS & HS */ + /* Reserved */ + {TOK_SKIP, 0x2F, 0x00}, + /* Reserved */ + {TOK_SKIP, 0x30, 0x00}, + /* Reserved */ + {TOK_SKIP, 0x31, 0x00}, + /* HS, VS active high */ + {TOK_WRITE, REG_SYNC_CONTROL, 0x00}, + /* 10-bit BT.656 */ + {TOK_WRITE, REG_OUTPUT_FORMATTER1, 0x00}, + /* Enable clk & data */ + {TOK_WRITE, REG_OUTPUT_FORMATTER2, 0x11}, + /* Enable AVID & FLD */ + {TOK_WRITE, REG_OUTPUT_FORMATTER3, 0xEE}, + /* Enable VS & HS */ + {TOK_WRITE, REG_OUTPUT_FORMATTER4, 0xAF}, {TOK_WRITE, REG_OUTPUT_FORMATTER5, 0xFF}, {TOK_WRITE, REG_OUTPUT_FORMATTER6, 0xFF}, - {TOK_WRITE, REG_CLEAR_LOST_LOCK, 0x01}, /* Clear status */ + /* Clear status */ + {TOK_WRITE, REG_CLEAR_LOST_LOCK, 0x01}, {TOK_TERM, 0, 0}, }; -/* List of image formats supported by TVP5146/47 decoder +/** + * List of image formats supported by TVP5146/47 decoder * Currently we are using 8 bit mode only, but can be * extended to 10/20 bit mode. */ @@ -205,7 +214,7 @@ static const struct v4l2_fmtdesc tvp514x_fmt_list[] = { }, }; -/* +/** * Supported standards - * * Currently supports two standards only, need to add support for rest of the @@ -240,35 +249,32 @@ static struct tvp514x_std_info tvp514x_std_list[] = { }, /* Standard: need to add for additional standard */ }; -/* - * Control structure for Auto Gain - * This is temporary data, will get replaced once - * v4l2_ctrl_query_fill supports it. - */ -static const struct v4l2_queryctrl tvp514x_autogain_ctrl = { - .id = V4L2_CID_AUTOGAIN, - .name = "Gain, Automatic", - .type = V4L2_CTRL_TYPE_BOOLEAN, - .minimum = 0, - .maximum = 1, - .step = 1, - .default_value = 1, -}; -/* - * Read a value from a register in an TVP5146/47 decoder device. + +static inline struct tvp514x_decoder *to_decoder(struct v4l2_subdev *sd) +{ + return container_of(sd, struct tvp514x_decoder, sd); +} + + +/** + * tvp514x_read_reg() - Read a value from a register in an TVP5146/47. + * @sd: ptr to v4l2_subdev struct + * @reg: TVP5146/47 register address + * * Returns value read if successful, or non-zero (-1) otherwise. */ -static int tvp514x_read_reg(struct i2c_client *client, u8 reg) +static int tvp514x_read_reg(struct v4l2_subdev *sd, u8 reg) { - int err; - int retry = 0; + int err, retry = 0; + struct i2c_client *client = v4l2_get_subdevdata(sd); + read_again: err = i2c_smbus_read_byte_data(client, reg); if (err == -1) { if (retry <= I2C_RETRY_COUNT) { - v4l_warn(client, "Read: retry ... %d\n", retry); + v4l2_warn(sd, "Read: retry ... %d\n", retry); retry++; msleep_interruptible(10); goto read_again; @@ -278,20 +284,39 @@ read_again: return err; } -/* +/** + * dump_reg() - dump the register content of TVP5146/47. + * @sd: ptr to v4l2_subdev struct + * @reg: TVP5146/47 register address + */ +static void dump_reg(struct v4l2_subdev *sd, u8 reg) +{ + u32 val; + + val = tvp514x_read_reg(sd, reg); + v4l2_info(sd, "Reg(0x%.2X): 0x%.2X\n", reg, val); +} + +/** + * tvp514x_write_reg() - Write a value to a register in TVP5146/47 + * @sd: ptr to v4l2_subdev struct + * @reg: TVP5146/47 register address + * @val: value to be written to the register + * * Write a value to a register in an TVP5146/47 decoder device. * Returns zero if successful, or non-zero otherwise. */ -static int tvp514x_write_reg(struct i2c_client *client, u8 reg, u8 val) +static int tvp514x_write_reg(struct v4l2_subdev *sd, u8 reg, u8 val) { - int err; - int retry = 0; + int err, retry = 0; + struct i2c_client *client = v4l2_get_subdevdata(sd); + write_again: err = i2c_smbus_write_byte_data(client, reg, val); if (err) { if (retry <= I2C_RETRY_COUNT) { - v4l_warn(client, "Write: retry ... %d\n", retry); + v4l2_warn(sd, "Write: retry ... %d\n", retry); retry++; msleep_interruptible(10); goto write_again; @@ -301,17 +326,19 @@ write_again: return err; } -/* - * tvp514x_write_regs : Initializes a list of TVP5146/47 registers +/** + * tvp514x_write_regs() : Initializes a list of TVP5146/47 registers + * @sd: ptr to v4l2_subdev struct + * @reglist: list of TVP5146/47 registers and values + * + * Initializes a list of TVP5146/47 registers:- * if token is TOK_TERM, then entire write operation terminates * if token is TOK_DELAY, then a delay of 'val' msec is introduced * if token is TOK_SKIP, then the register write is skipped * if token is TOK_WRITE, then the register write is performed - * - * reglist - list of registers to be written * Returns zero if successful, or non-zero otherwise. */ -static int tvp514x_write_regs(struct i2c_client *client, +static int tvp514x_write_regs(struct v4l2_subdev *sd, const struct tvp514x_reg reglist[]) { int err; @@ -326,31 +353,33 @@ static int tvp514x_write_regs(struct i2c_client *client, if (next->token == TOK_SKIP) continue; - err = tvp514x_write_reg(client, next->reg, (u8) next->val); + err = tvp514x_write_reg(sd, next->reg, (u8) next->val); if (err) { - v4l_err(client, "Write failed. Err[%d]\n", err); + v4l2_err(sd, "Write failed. Err[%d]\n", err); return err; } } return 0; } -/* - * tvp514x_get_current_std: - * Returns the current standard detected by TVP5146/47 +/** + * tvp514x_get_current_std() : Get the current standard detected by TVP5146/47 + * @sd: ptr to v4l2_subdev struct + * + * Get current standard detected by TVP5146/47, STD_INVALID if there is no + * standard detected. */ -static enum tvp514x_std tvp514x_get_current_std(struct tvp514x_decoder - *decoder) +static enum tvp514x_std tvp514x_get_current_std(struct v4l2_subdev *sd) { u8 std, std_status; - std = tvp514x_read_reg(decoder->client, REG_VIDEO_STD); - if ((std & VIDEO_STD_MASK) == VIDEO_STD_AUTO_SWITCH_BIT) { + std = tvp514x_read_reg(sd, REG_VIDEO_STD); + if ((std & VIDEO_STD_MASK) == VIDEO_STD_AUTO_SWITCH_BIT) /* use the standard status register */ - std_status = tvp514x_read_reg(decoder->client, - REG_VIDEO_STD_STATUS); - } else - std_status = std; /* use the standard register itself */ + std_status = tvp514x_read_reg(sd, REG_VIDEO_STD_STATUS); + else + /* use the standard register itself */ + std_status = std; switch (std_status & VIDEO_STD_MASK) { case VIDEO_STD_NTSC_MJ_BIT: @@ -366,94 +395,99 @@ static enum tvp514x_std tvp514x_get_current_std(struct tvp514x_decoder return STD_INVALID; } -/* - * TVP5146/47 register dump function - */ -static void tvp514x_reg_dump(struct tvp514x_decoder *decoder) +/* TVP5146/47 register dump function */ +static void tvp514x_reg_dump(struct v4l2_subdev *sd) { - u8 value; - - dump_reg(decoder->client, REG_INPUT_SEL, value); - dump_reg(decoder->client, REG_AFE_GAIN_CTRL, value); - dump_reg(decoder->client, REG_VIDEO_STD, value); - dump_reg(decoder->client, REG_OPERATION_MODE, value); - dump_reg(decoder->client, REG_COLOR_KILLER, value); - dump_reg(decoder->client, REG_LUMA_CONTROL1, value); - dump_reg(decoder->client, REG_LUMA_CONTROL2, value); - dump_reg(decoder->client, REG_LUMA_CONTROL3, value); - dump_reg(decoder->client, REG_BRIGHTNESS, value); - dump_reg(decoder->client, REG_CONTRAST, value); - dump_reg(decoder->client, REG_SATURATION, value); - dump_reg(decoder->client, REG_HUE, value); - dump_reg(decoder->client, REG_CHROMA_CONTROL1, value); - dump_reg(decoder->client, REG_CHROMA_CONTROL2, value); - dump_reg(decoder->client, REG_COMP_PR_SATURATION, value); - dump_reg(decoder->client, REG_COMP_Y_CONTRAST, value); - dump_reg(decoder->client, REG_COMP_PB_SATURATION, value); - dump_reg(decoder->client, REG_COMP_Y_BRIGHTNESS, value); - dump_reg(decoder->client, REG_AVID_START_PIXEL_LSB, value); - dump_reg(decoder->client, REG_AVID_START_PIXEL_MSB, value); - dump_reg(decoder->client, REG_AVID_STOP_PIXEL_LSB, value); - dump_reg(decoder->client, REG_AVID_STOP_PIXEL_MSB, value); - dump_reg(decoder->client, REG_HSYNC_START_PIXEL_LSB, value); - dump_reg(decoder->client, REG_HSYNC_START_PIXEL_MSB, value); - dump_reg(decoder->client, REG_HSYNC_STOP_PIXEL_LSB, value); - dump_reg(decoder->client, REG_HSYNC_STOP_PIXEL_MSB, value); - dump_reg(decoder->client, REG_VSYNC_START_LINE_LSB, value); - dump_reg(decoder->client, REG_VSYNC_START_LINE_MSB, value); - dump_reg(decoder->client, REG_VSYNC_STOP_LINE_LSB, value); - dump_reg(decoder->client, REG_VSYNC_STOP_LINE_MSB, value); - dump_reg(decoder->client, REG_VBLK_START_LINE_LSB, value); - dump_reg(decoder->client, REG_VBLK_START_LINE_MSB, value); - dump_reg(decoder->client, REG_VBLK_STOP_LINE_LSB, value); - dump_reg(decoder->client, REG_VBLK_STOP_LINE_MSB, value); - dump_reg(decoder->client, REG_SYNC_CONTROL, value); - dump_reg(decoder->client, REG_OUTPUT_FORMATTER1, value); - dump_reg(decoder->client, REG_OUTPUT_FORMATTER2, value); - dump_reg(decoder->client, REG_OUTPUT_FORMATTER3, value); - dump_reg(decoder->client, REG_OUTPUT_FORMATTER4, value); - dump_reg(decoder->client, REG_OUTPUT_FORMATTER5, value); - dump_reg(decoder->client, REG_OUTPUT_FORMATTER6, value); - dump_reg(decoder->client, REG_CLEAR_LOST_LOCK, value); + dump_reg(sd, REG_INPUT_SEL); + dump_reg(sd, REG_AFE_GAIN_CTRL); + dump_reg(sd, REG_VIDEO_STD); + dump_reg(sd, REG_OPERATION_MODE); + dump_reg(sd, REG_COLOR_KILLER); + dump_reg(sd, REG_LUMA_CONTROL1); + dump_reg(sd, REG_LUMA_CONTROL2); + dump_reg(sd, REG_LUMA_CONTROL3); + dump_reg(sd, REG_BRIGHTNESS); + dump_reg(sd, REG_CONTRAST); + dump_reg(sd, REG_SATURATION); + dump_reg(sd, REG_HUE); + dump_reg(sd, REG_CHROMA_CONTROL1); + dump_reg(sd, REG_CHROMA_CONTROL2); + dump_reg(sd, REG_COMP_PR_SATURATION); + dump_reg(sd, REG_COMP_Y_CONTRAST); + dump_reg(sd, REG_COMP_PB_SATURATION); + dump_reg(sd, REG_COMP_Y_BRIGHTNESS); + dump_reg(sd, REG_AVID_START_PIXEL_LSB); + dump_reg(sd, REG_AVID_START_PIXEL_MSB); + dump_reg(sd, REG_AVID_STOP_PIXEL_LSB); + dump_reg(sd, REG_AVID_STOP_PIXEL_MSB); + dump_reg(sd, REG_HSYNC_START_PIXEL_LSB); + dump_reg(sd, REG_HSYNC_START_PIXEL_MSB); + dump_reg(sd, REG_HSYNC_STOP_PIXEL_LSB); + dump_reg(sd, REG_HSYNC_STOP_PIXEL_MSB); + dump_reg(sd, REG_VSYNC_START_LINE_LSB); + dump_reg(sd, REG_VSYNC_START_LINE_MSB); + dump_reg(sd, REG_VSYNC_STOP_LINE_LSB); + dump_reg(sd, REG_VSYNC_STOP_LINE_MSB); + dump_reg(sd, REG_VBLK_START_LINE_LSB); + dump_reg(sd, REG_VBLK_START_LINE_MSB); + dump_reg(sd, REG_VBLK_STOP_LINE_LSB); + dump_reg(sd, REG_VBLK_STOP_LINE_MSB); + dump_reg(sd, REG_SYNC_CONTROL); + dump_reg(sd, REG_OUTPUT_FORMATTER1); + dump_reg(sd, REG_OUTPUT_FORMATTER2); + dump_reg(sd, REG_OUTPUT_FORMATTER3); + dump_reg(sd, REG_OUTPUT_FORMATTER4); + dump_reg(sd, REG_OUTPUT_FORMATTER5); + dump_reg(sd, REG_OUTPUT_FORMATTER6); + dump_reg(sd, REG_CLEAR_LOST_LOCK); } -/* - * Configure the TVP5146/47 with the current register settings +/** + * tvp514x_configure() - Configure the TVP5146/47 registers + * @sd: ptr to v4l2_subdev struct + * @decoder: ptr to tvp514x_decoder structure + * * Returns zero if successful, or non-zero otherwise. */ -static int tvp514x_configure(struct tvp514x_decoder *decoder) +static int tvp514x_configure(struct v4l2_subdev *sd, + struct tvp514x_decoder *decoder) { int err; /* common register initialization */ err = - tvp514x_write_regs(decoder->client, decoder->tvp514x_regs); + tvp514x_write_regs(sd, decoder->tvp514x_regs); if (err) return err; if (debug) - tvp514x_reg_dump(decoder); + tvp514x_reg_dump(sd); return 0; } -/* - * Detect if an tvp514x is present, and if so which revision. +/** + * tvp514x_detect() - Detect if an tvp514x is present, and if so which revision. + * @sd: pointer to standard V4L2 sub-device structure + * @decoder: pointer to tvp514x_decoder structure + * * A device is considered to be detected if the chip ID (LSB and MSB) * registers match the expected values. * Any value of the rom version register is accepted. * Returns ENODEV error number if no device is detected, or zero * if a device is detected. */ -static int tvp514x_detect(struct tvp514x_decoder *decoder) +static int tvp514x_detect(struct v4l2_subdev *sd, + struct tvp514x_decoder *decoder) { u8 chip_id_msb, chip_id_lsb, rom_ver; + struct i2c_client *client = v4l2_get_subdevdata(sd); - chip_id_msb = tvp514x_read_reg(decoder->client, REG_CHIP_ID_MSB); - chip_id_lsb = tvp514x_read_reg(decoder->client, REG_CHIP_ID_LSB); - rom_ver = tvp514x_read_reg(decoder->client, REG_ROM_VERSION); + chip_id_msb = tvp514x_read_reg(sd, REG_CHIP_ID_MSB); + chip_id_lsb = tvp514x_read_reg(sd, REG_CHIP_ID_LSB); + rom_ver = tvp514x_read_reg(sd, REG_ROM_VERSION); - v4l_dbg(1, debug, decoder->client, + v4l2_dbg(1, debug, sd, "chip id detected msb:0x%x lsb:0x%x rom version:0x%x\n", chip_id_msb, chip_id_lsb, rom_ver); if ((chip_id_msb != TVP514X_CHIP_ID_MSB) @@ -462,38 +496,30 @@ static int tvp514x_detect(struct tvp514x_decoder *decoder) /* We didn't read the values we expected, so this must not be * an TVP5146/47. */ - v4l_err(decoder->client, - "chip id mismatch msb:0x%x lsb:0x%x\n", - chip_id_msb, chip_id_lsb); + v4l2_err(sd, "chip id mismatch msb:0x%x lsb:0x%x\n", + chip_id_msb, chip_id_lsb); return -ENODEV; } decoder->ver = rom_ver; - decoder->state = STATE_DETECTED; - v4l_info(decoder->client, - "%s found at 0x%x (%s)\n", decoder->client->name, - decoder->client->addr << 1, - decoder->client->adapter->name); + v4l2_info(sd, "%s (Version - 0x%.2x) found at 0x%x (%s)\n", + client->name, decoder->ver, + client->addr << 1, client->adapter->name); return 0; } -/* - * Following are decoder interface functions implemented by - * TVP5146/47 decoder driver. - */ - /** - * ioctl_querystd - V4L2 decoder interface handler for VIDIOC_QUERYSTD ioctl - * @s: pointer to standard V4L2 device structure + * tvp514x_querystd() - V4L2 decoder interface handler for querystd + * @sd: pointer to standard V4L2 sub-device structure * @std_id: standard V4L2 std_id ioctl enum * * Returns the current standard detected by TVP5146/47. If no active input is * detected, returns -EINVAL */ -static int ioctl_querystd(struct v4l2_int_device *s, v4l2_std_id *std_id) +static int tvp514x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id) { - struct tvp514x_decoder *decoder = s->priv; + struct tvp514x_decoder *decoder = to_decoder(sd); enum tvp514x_std current_std; enum tvp514x_input input_sel; u8 sync_lock_status, lock_mask; @@ -502,11 +528,11 @@ static int ioctl_querystd(struct v4l2_int_device *s, v4l2_std_id *std_id) return -EINVAL; /* get the current standard */ - current_std = tvp514x_get_current_std(decoder); + current_std = tvp514x_get_current_std(sd); if (current_std == STD_INVALID) return -EINVAL; - input_sel = decoder->route.input; + input_sel = decoder->input; switch (input_sel) { case INPUT_CVBS_VI1A: @@ -544,42 +570,39 @@ static int ioctl_querystd(struct v4l2_int_device *s, v4l2_std_id *std_id) return -EINVAL; } /* check whether signal is locked */ - sync_lock_status = tvp514x_read_reg(decoder->client, REG_STATUS1); + sync_lock_status = tvp514x_read_reg(sd, REG_STATUS1); if (lock_mask != (sync_lock_status & lock_mask)) return -EINVAL; /* No input detected */ decoder->current_std = current_std; *std_id = decoder->std_list[current_std].standard.id; - v4l_dbg(1, debug, decoder->client, "Current STD: %s", + v4l2_dbg(1, debug, sd, "Current STD: %s", decoder->std_list[current_std].standard.name); return 0; } /** - * ioctl_s_std - V4L2 decoder interface handler for VIDIOC_S_STD ioctl - * @s: pointer to standard V4L2 device structure + * tvp514x_s_std() - V4L2 decoder interface handler for s_std + * @sd: pointer to standard V4L2 sub-device structure * @std_id: standard V4L2 v4l2_std_id ioctl enum * * If std_id is supported, sets the requested standard. Otherwise, returns * -EINVAL */ -static int ioctl_s_std(struct v4l2_int_device *s, v4l2_std_id *std_id) +static int tvp514x_s_std(struct v4l2_subdev *sd, v4l2_std_id std_id) { - struct tvp514x_decoder *decoder = s->priv; + struct tvp514x_decoder *decoder = to_decoder(sd); int err, i; - if (std_id == NULL) - return -EINVAL; - for (i = 0; i < decoder->num_stds; i++) - if (*std_id & decoder->std_list[i].standard.id) + if (std_id & decoder->std_list[i].standard.id) break; if ((i == decoder->num_stds) || (i == STD_INVALID)) return -EINVAL; - err = tvp514x_write_reg(decoder->client, REG_VIDEO_STD, + err = tvp514x_write_reg(sd, REG_VIDEO_STD, decoder->std_list[i].video_std); if (err) return err; @@ -588,24 +611,26 @@ static int ioctl_s_std(struct v4l2_int_device *s, v4l2_std_id *std_id) decoder->tvp514x_regs[REG_VIDEO_STD].val = decoder->std_list[i].video_std; - v4l_dbg(1, debug, decoder->client, "Standard set to: %s", + v4l2_dbg(1, debug, sd, "Standard set to: %s", decoder->std_list[i].standard.name); return 0; } /** - * ioctl_s_routing - V4L2 decoder interface handler for VIDIOC_S_INPUT ioctl - * @s: pointer to standard V4L2 device structure - * @index: number of the input + * tvp514x_s_routing() - V4L2 decoder interface handler for s_routing + * @sd: pointer to standard V4L2 sub-device structure + * @input: input selector for routing the signal + * @output: output selector for routing the signal + * @config: config value. Not used * * If index is valid, selects the requested input. Otherwise, returns -EINVAL if * the input is not supported or there is no active signal present in the * selected input. */ -static int ioctl_s_routing(struct v4l2_int_device *s, - struct v4l2_routing *route) +static int tvp514x_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) { - struct tvp514x_decoder *decoder = s->priv; + struct tvp514x_decoder *decoder = to_decoder(sd); int err; enum tvp514x_input input_sel; enum tvp514x_output output_sel; @@ -613,20 +638,21 @@ static int ioctl_s_routing(struct v4l2_int_device *s, u8 sync_lock_status, lock_mask; int try_count = LOCK_RETRY_COUNT; - if ((!route) || (route->input >= INPUT_INVALID) || - (route->output >= OUTPUT_INVALID)) - return -EINVAL; /* Index out of bound */ + if ((input >= INPUT_INVALID) || + (output >= OUTPUT_INVALID)) + /* Index out of bound */ + return -EINVAL; - input_sel = route->input; - output_sel = route->output; + input_sel = input; + output_sel = output; - err = tvp514x_write_reg(decoder->client, REG_INPUT_SEL, input_sel); + err = tvp514x_write_reg(sd, REG_INPUT_SEL, input_sel); if (err) return err; - output_sel |= tvp514x_read_reg(decoder->client, + output_sel |= tvp514x_read_reg(sd, REG_OUTPUT_FORMATTER1) & 0x7; - err = tvp514x_write_reg(decoder->client, REG_OUTPUT_FORMATTER1, + err = tvp514x_write_reg(sd, REG_OUTPUT_FORMATTER1, output_sel); if (err) return err; @@ -637,7 +663,7 @@ static int ioctl_s_routing(struct v4l2_int_device *s, /* Clear status */ msleep(LOCK_RETRY_DELAY); err = - tvp514x_write_reg(decoder->client, REG_CLEAR_LOST_LOCK, 0x01); + tvp514x_write_reg(sd, REG_CLEAR_LOST_LOCK, 0x01); if (err) return err; @@ -672,7 +698,7 @@ static int ioctl_s_routing(struct v4l2_int_device *s, lock_mask = STATUS_HORZ_SYNC_LOCK_BIT | STATUS_VIRT_SYNC_LOCK_BIT; break; - /*Need to add other interfaces*/ + /* Need to add other interfaces*/ default: return -EINVAL; } @@ -682,42 +708,41 @@ static int ioctl_s_routing(struct v4l2_int_device *s, msleep(LOCK_RETRY_DELAY); /* get the current standard for future reference */ - current_std = tvp514x_get_current_std(decoder); + current_std = tvp514x_get_current_std(sd); if (current_std == STD_INVALID) continue; - sync_lock_status = tvp514x_read_reg(decoder->client, + sync_lock_status = tvp514x_read_reg(sd, REG_STATUS1); if (lock_mask == (sync_lock_status & lock_mask)) - break; /* Input detected */ + /* Input detected */ + break; } if ((current_std == STD_INVALID) || (try_count < 0)) return -EINVAL; decoder->current_std = current_std; - decoder->route.input = route->input; - decoder->route.output = route->output; + decoder->input = input; + decoder->output = output; - v4l_dbg(1, debug, decoder->client, - "Input set to: %d, std : %d", + v4l2_dbg(1, debug, sd, "Input set to: %d, std : %d", input_sel, current_std); return 0; } /** - * ioctl_queryctrl - V4L2 decoder interface handler for VIDIOC_QUERYCTRL ioctl - * @s: pointer to standard V4L2 device structure + * tvp514x_queryctrl() - V4L2 decoder interface handler for queryctrl + * @sd: pointer to standard V4L2 sub-device structure * @qctrl: standard V4L2 v4l2_queryctrl structure * * If the requested control is supported, returns the control information. * Otherwise, returns -EINVAL if the control is not supported. */ static int -ioctl_queryctrl(struct v4l2_int_device *s, struct v4l2_queryctrl *qctrl) +tvp514x_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qctrl) { - struct tvp514x_decoder *decoder = s->priv; int err = -EINVAL; if (qctrl == NULL) @@ -725,13 +750,13 @@ ioctl_queryctrl(struct v4l2_int_device *s, struct v4l2_queryctrl *qctrl) switch (qctrl->id) { case V4L2_CID_BRIGHTNESS: - /* Brightness supported is (0-255), - */ + /* Brightness supported is (0-255), */ err = v4l2_ctrl_query_fill(qctrl, 0, 255, 1, 128); break; case V4L2_CID_CONTRAST: case V4L2_CID_SATURATION: - /* Saturation and Contrast supported is - + /** + * Saturation and Contrast supported is - * Contrast: 0 - 255 (Default - 128) * Saturation: 0 - 255 (Default - 128) */ @@ -744,30 +769,27 @@ ioctl_queryctrl(struct v4l2_int_device *s, struct v4l2_queryctrl *qctrl) err = v4l2_ctrl_query_fill(qctrl, -180, 180, 180, 0); break; case V4L2_CID_AUTOGAIN: - /* Autogain is either 0 or 1*/ - memcpy(qctrl, &tvp514x_autogain_ctrl, - sizeof(struct v4l2_queryctrl)); - err = 0; + /** + * Auto Gain supported is - + * 0 - 1 (Default - 1) + */ + err = v4l2_ctrl_query_fill(qctrl, 0, 1, 1, 1); break; default: - v4l_err(decoder->client, - "invalid control id %d\n", qctrl->id); + v4l2_err(sd, "invalid control id %d\n", qctrl->id); return err; } - v4l_dbg(1, debug, decoder->client, - "Query Control: %s : Min - %d, Max - %d, Def - %d", - qctrl->name, - qctrl->minimum, - qctrl->maximum, + v4l2_dbg(1, debug, sd, "Query Control:%s: Min - %d, Max - %d, Def - %d", + qctrl->name, qctrl->minimum, qctrl->maximum, qctrl->default_value); return err; } /** - * ioctl_g_ctrl - V4L2 decoder interface handler for VIDIOC_G_CTRL ioctl - * @s: pointer to standard V4L2 device structure + * tvp514x_g_ctrl() - V4L2 decoder interface handler for g_ctrl + * @sd: pointer to standard V4L2 sub-device structure * @ctrl: pointer to v4l2_control structure * * If the requested control is supported, returns the control's current @@ -775,9 +797,9 @@ ioctl_queryctrl(struct v4l2_int_device *s, struct v4l2_queryctrl *qctrl) * supported. */ static int -ioctl_g_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) +tvp514x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) { - struct tvp514x_decoder *decoder = s->priv; + struct tvp514x_decoder *decoder = to_decoder(sd); if (ctrl == NULL) return -EINVAL; @@ -811,74 +833,70 @@ ioctl_g_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) break; default: - v4l_err(decoder->client, - "invalid control id %d\n", ctrl->id); + v4l2_err(sd, "invalid control id %d\n", ctrl->id); return -EINVAL; } - v4l_dbg(1, debug, decoder->client, - "Get Control: ID - %d - %d", + v4l2_dbg(1, debug, sd, "Get Control: ID - %d - %d", ctrl->id, ctrl->value); return 0; } /** - * ioctl_s_ctrl - V4L2 decoder interface handler for VIDIOC_S_CTRL ioctl - * @s: pointer to standard V4L2 device structure + * tvp514x_s_ctrl() - V4L2 decoder interface handler for s_ctrl + * @sd: pointer to standard V4L2 sub-device structure * @ctrl: pointer to v4l2_control structure * * If the requested control is supported, sets the control's current * value in HW. Otherwise, returns -EINVAL if the control is not supported. */ static int -ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) +tvp514x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) { - struct tvp514x_decoder *decoder = s->priv; + struct tvp514x_decoder *decoder = to_decoder(sd); int err = -EINVAL, value; if (ctrl == NULL) return err; - value = (__s32) ctrl->value; + value = ctrl->value; switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: if (ctrl->value < 0 || ctrl->value > 255) { - v4l_err(decoder->client, - "invalid brightness setting %d\n", + v4l2_err(sd, "invalid brightness setting %d\n", ctrl->value); return -ERANGE; } - err = tvp514x_write_reg(decoder->client, REG_BRIGHTNESS, + err = tvp514x_write_reg(sd, REG_BRIGHTNESS, value); if (err) return err; + decoder->tvp514x_regs[REG_BRIGHTNESS].val = value; break; case V4L2_CID_CONTRAST: if (ctrl->value < 0 || ctrl->value > 255) { - v4l_err(decoder->client, - "invalid contrast setting %d\n", + v4l2_err(sd, "invalid contrast setting %d\n", ctrl->value); return -ERANGE; } - err = tvp514x_write_reg(decoder->client, REG_CONTRAST, - value); + err = tvp514x_write_reg(sd, REG_CONTRAST, value); if (err) return err; + decoder->tvp514x_regs[REG_CONTRAST].val = value; break; case V4L2_CID_SATURATION: if (ctrl->value < 0 || ctrl->value > 255) { - v4l_err(decoder->client, - "invalid saturation setting %d\n", + v4l2_err(sd, "invalid saturation setting %d\n", ctrl->value); return -ERANGE; } - err = tvp514x_write_reg(decoder->client, REG_SATURATION, - value); + err = tvp514x_write_reg(sd, REG_SATURATION, value); if (err) return err; + decoder->tvp514x_regs[REG_SATURATION].val = value; break; case V4L2_CID_HUE: @@ -889,15 +907,13 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) else if (value == 0) value = 0; else { - v4l_err(decoder->client, - "invalid hue setting %d\n", - ctrl->value); + v4l2_err(sd, "invalid hue setting %d\n", ctrl->value); return -ERANGE; } - err = tvp514x_write_reg(decoder->client, REG_HUE, - value); + err = tvp514x_write_reg(sd, REG_HUE, value); if (err) return err; + decoder->tvp514x_regs[REG_HUE].val = value; break; case V4L2_CID_AUTOGAIN: @@ -906,41 +922,38 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) else if (value == 0) value = 0x0C; else { - v4l_err(decoder->client, - "invalid auto gain setting %d\n", + v4l2_err(sd, "invalid auto gain setting %d\n", ctrl->value); return -ERANGE; } - err = tvp514x_write_reg(decoder->client, REG_AFE_GAIN_CTRL, - value); + err = tvp514x_write_reg(sd, REG_AFE_GAIN_CTRL, value); if (err) return err; + decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val = value; break; default: - v4l_err(decoder->client, - "invalid control id %d\n", ctrl->id); + v4l2_err(sd, "invalid control id %d\n", ctrl->id); return err; } - v4l_dbg(1, debug, decoder->client, - "Set Control: ID - %d - %d", + v4l2_dbg(1, debug, sd, "Set Control: ID - %d - %d", ctrl->id, ctrl->value); return err; } /** - * ioctl_enum_fmt_cap - Implement the CAPTURE buffer VIDIOC_ENUM_FMT ioctl - * @s: pointer to standard V4L2 device structure + * tvp514x_enum_fmt_cap() - V4L2 decoder interface handler for enum_fmt + * @sd: pointer to standard V4L2 sub-device structure * @fmt: standard V4L2 VIDIOC_ENUM_FMT ioctl structure * * Implement the VIDIOC_ENUM_FMT ioctl to enumerate supported formats */ static int -ioctl_enum_fmt_cap(struct v4l2_int_device *s, struct v4l2_fmtdesc *fmt) +tvp514x_enum_fmt_cap(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmt) { - struct tvp514x_decoder *decoder = s->priv; + struct tvp514x_decoder *decoder = to_decoder(sd); int index; if (fmt == NULL) @@ -948,24 +961,25 @@ ioctl_enum_fmt_cap(struct v4l2_int_device *s, struct v4l2_fmtdesc *fmt) index = fmt->index; if ((index >= decoder->num_fmts) || (index < 0)) - return -EINVAL; /* Index out of bound */ + /* Index out of bound */ + return -EINVAL; if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; /* only capture is supported */ + /* only capture is supported */ + return -EINVAL; memcpy(fmt, &decoder->fmt_list[index], sizeof(struct v4l2_fmtdesc)); - v4l_dbg(1, debug, decoder->client, - "Current FMT: index - %d (%s)", + v4l2_dbg(1, debug, sd, "Current FMT: index - %d (%s)", decoder->fmt_list[index].index, decoder->fmt_list[index].description); return 0; } /** - * ioctl_try_fmt_cap - Implement the CAPTURE buffer VIDIOC_TRY_FMT ioctl - * @s: pointer to standard V4L2 device structure + * tvp514x_try_fmt_cap() - V4L2 decoder interface handler for try_fmt + * @sd: pointer to standard V4L2 sub-device structure * @f: pointer to standard V4L2 VIDIOC_TRY_FMT ioctl structure * * Implement the VIDIOC_TRY_FMT ioctl for the CAPTURE buffer type. This @@ -973,9 +987,9 @@ ioctl_enum_fmt_cap(struct v4l2_int_device *s, struct v4l2_fmtdesc *fmt) * without actually making it take effect. */ static int -ioctl_try_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f) +tvp514x_try_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f) { - struct tvp514x_decoder *decoder = s->priv; + struct tvp514x_decoder *decoder = to_decoder(sd); int ifmt; struct v4l2_pix_format *pix; enum tvp514x_std current_std; @@ -984,12 +998,13 @@ ioctl_try_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f) return -EINVAL; if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + /* only capture is supported */ f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; pix = &f->fmt.pix; /* Calculate height and width based on current standard */ - current_std = tvp514x_get_current_std(decoder); + current_std = tvp514x_get_current_std(sd); if (current_std == STD_INVALID) return -EINVAL; @@ -1003,7 +1018,8 @@ ioctl_try_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f) break; } if (ifmt == decoder->num_fmts) - ifmt = 0; /* None of the format matched, select default */ + /* None of the format matched, select default */ + ifmt = 0; pix->pixelformat = decoder->fmt_list[ifmt].pixelformat; pix->field = V4L2_FIELD_INTERLACED; @@ -1012,8 +1028,7 @@ ioctl_try_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f) pix->colorspace = V4L2_COLORSPACE_SMPTE170M; pix->priv = 0; - v4l_dbg(1, debug, decoder->client, - "Try FMT: pixelformat - %s, bytesperline - %d" + v4l2_dbg(1, debug, sd, "Try FMT: pixelformat - %s, bytesperline - %d" "Width - %d, Height - %d", decoder->fmt_list[ifmt].description, pix->bytesperline, pix->width, pix->height); @@ -1021,8 +1036,8 @@ ioctl_try_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f) } /** - * ioctl_s_fmt_cap - V4L2 decoder interface handler for VIDIOC_S_FMT ioctl - * @s: pointer to standard V4L2 device structure + * tvp514x_s_fmt_cap() - V4L2 decoder interface handler for s_fmt + * @sd: pointer to standard V4L2 sub-device structure * @f: pointer to standard V4L2 VIDIOC_S_FMT ioctl structure * * If the requested format is supported, configures the HW to use that @@ -1030,9 +1045,9 @@ ioctl_try_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f) * correctly configured. */ static int -ioctl_s_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f) +tvp514x_s_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f) { - struct tvp514x_decoder *decoder = s->priv; + struct tvp514x_decoder *decoder = to_decoder(sd); struct v4l2_pix_format *pix; int rval; @@ -1040,10 +1055,11 @@ ioctl_s_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f) return -EINVAL; if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; /* only capture is supported */ + /* only capture is supported */ + return -EINVAL; pix = &f->fmt.pix; - rval = ioctl_try_fmt_cap(s, f); + rval = tvp514x_try_fmt_cap(sd, f); if (rval) return rval; @@ -1053,28 +1069,28 @@ ioctl_s_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f) } /** - * ioctl_g_fmt_cap - V4L2 decoder interface handler for ioctl_g_fmt_cap - * @s: pointer to standard V4L2 device structure + * tvp514x_g_fmt_cap() - V4L2 decoder interface handler for tvp514x_g_fmt_cap + * @sd: pointer to standard V4L2 sub-device structure * @f: pointer to standard V4L2 v4l2_format structure * * Returns the decoder's current pixel format in the v4l2_format * parameter. */ static int -ioctl_g_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f) +tvp514x_g_fmt_cap(struct v4l2_subdev *sd, struct v4l2_format *f) { - struct tvp514x_decoder *decoder = s->priv; + struct tvp514x_decoder *decoder = to_decoder(sd); if (f == NULL) return -EINVAL; if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; /* only capture is supported */ + /* only capture is supported */ + return -EINVAL; f->fmt.pix = decoder->pix; - v4l_dbg(1, debug, decoder->client, - "Current FMT: bytesperline - %d" + v4l2_dbg(1, debug, sd, "Current FMT: bytesperline - %d" "Width - %d, Height - %d", decoder->pix.bytesperline, decoder->pix.width, decoder->pix.height); @@ -1082,16 +1098,16 @@ ioctl_g_fmt_cap(struct v4l2_int_device *s, struct v4l2_format *f) } /** - * ioctl_g_parm - V4L2 decoder interface handler for VIDIOC_G_PARM ioctl - * @s: pointer to standard V4L2 device structure + * tvp514x_g_parm() - V4L2 decoder interface handler for g_parm + * @sd: pointer to standard V4L2 sub-device structure * @a: pointer to standard V4L2 VIDIOC_G_PARM ioctl structure * * Returns the decoder's video CAPTURE parameters. */ static int -ioctl_g_parm(struct v4l2_int_device *s, struct v4l2_streamparm *a) +tvp514x_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a) { - struct tvp514x_decoder *decoder = s->priv; + struct tvp514x_decoder *decoder = to_decoder(sd); struct v4l2_captureparm *cparm; enum tvp514x_std current_std; @@ -1099,13 +1115,14 @@ ioctl_g_parm(struct v4l2_int_device *s, struct v4l2_streamparm *a) return -EINVAL; if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; /* only capture is supported */ + /* only capture is supported */ + return -EINVAL; memset(a, 0, sizeof(*a)); a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; /* get the current standard */ - current_std = tvp514x_get_current_std(decoder); + current_std = tvp514x_get_current_std(sd); if (current_std == STD_INVALID) return -EINVAL; @@ -1120,17 +1137,17 @@ ioctl_g_parm(struct v4l2_int_device *s, struct v4l2_streamparm *a) } /** - * ioctl_s_parm - V4L2 decoder interface handler for VIDIOC_S_PARM ioctl - * @s: pointer to standard V4L2 device structure + * tvp514x_s_parm() - V4L2 decoder interface handler for s_parm + * @sd: pointer to standard V4L2 sub-device structure * @a: pointer to standard V4L2 VIDIOC_S_PARM ioctl structure * * Configures the decoder to use the input parameters, if possible. If * not possible, returns the appropriate error code. */ static int -ioctl_s_parm(struct v4l2_int_device *s, struct v4l2_streamparm *a) +tvp514x_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a) { - struct tvp514x_decoder *decoder = s->priv; + struct tvp514x_decoder *decoder = to_decoder(sd); struct v4l2_fract *timeperframe; enum tvp514x_std current_std; @@ -1138,12 +1155,13 @@ ioctl_s_parm(struct v4l2_int_device *s, struct v4l2_streamparm *a) return -EINVAL; if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; /* only capture is supported */ + /* only capture is supported */ + return -EINVAL; timeperframe = &a->parm.capture.timeperframe; /* get the current standard */ - current_std = tvp514x_get_current_std(decoder); + current_std = tvp514x_get_current_std(sd); if (current_std == STD_INVALID) return -EINVAL; @@ -1156,111 +1174,58 @@ ioctl_s_parm(struct v4l2_int_device *s, struct v4l2_streamparm *a) } /** - * ioctl_g_ifparm - V4L2 decoder interface handler for vidioc_int_g_ifparm_num - * @s: pointer to standard V4L2 device structure - * @p: pointer to standard V4L2 vidioc_int_g_ifparm_num ioctl structure - * - * Gets slave interface parameters. - * Calculates the required xclk value to support the requested - * clock parameters in p. This value is returned in the p - * parameter. - */ -static int ioctl_g_ifparm(struct v4l2_int_device *s, struct v4l2_ifparm *p) -{ - struct tvp514x_decoder *decoder = s->priv; - int rval; - - if (p == NULL) - return -EINVAL; - - if (NULL == decoder->pdata->ifparm) - return -EINVAL; - - rval = decoder->pdata->ifparm(p); - if (rval) { - v4l_err(decoder->client, "g_ifparm.Err[%d]\n", rval); - return rval; - } - - p->u.bt656.clock_curr = TVP514X_XCLK_BT656; - - return 0; -} - -/** - * ioctl_g_priv - V4L2 decoder interface handler for vidioc_int_g_priv_num - * @s: pointer to standard V4L2 device structure - * @p: void pointer to hold decoder's private data address - * - * Returns device's (decoder's) private data area address in p parameter - */ -static int ioctl_g_priv(struct v4l2_int_device *s, void *p) -{ - struct tvp514x_decoder *decoder = s->priv; - - if (NULL == decoder->pdata->priv_data_set) - return -EINVAL; - - return decoder->pdata->priv_data_set(p); -} - -/** - * ioctl_s_power - V4L2 decoder interface handler for vidioc_int_s_power_num - * @s: pointer to standard V4L2 device structure - * @on: power state to which device is to be set + * tvp514x_s_stream() - V4L2 decoder i/f handler for s_stream + * @sd: pointer to standard V4L2 sub-device structure + * @enable: streaming enable or disable * - * Sets devices power state to requrested state, if possible. + * Sets streaming to enable or disable, if possible. */ -static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on) +static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable) { - struct tvp514x_decoder *decoder = s->priv; int err = 0; + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct tvp514x_decoder *decoder = to_decoder(sd); - switch (on) { - case V4L2_POWER_OFF: - /* Power Down Sequence */ - err = - tvp514x_write_reg(decoder->client, REG_OPERATION_MODE, - 0x01); - /* Disable mux for TVP5146/47 decoder data path */ - if (decoder->pdata->power_set) - err |= decoder->pdata->power_set(on); - decoder->state = STATE_NOT_DETECTED; - break; + if (decoder->streaming == enable) + return 0; - case V4L2_POWER_STANDBY: - if (decoder->pdata->power_set) - err = decoder->pdata->power_set(on); + switch (enable) { + case 0: + { + /* Power Down Sequence */ + err = tvp514x_write_reg(sd, REG_OPERATION_MODE, 0x01); + if (err) { + v4l2_err(sd, "Unable to turn off decoder\n"); + return err; + } + decoder->streaming = enable; break; + } + case 1: + { + struct tvp514x_reg *int_seq = (struct tvp514x_reg *) + client->driver->id_table->driver_data; - case V4L2_POWER_ON: - /* Enable mux for TVP5146/47 decoder data path */ - if ((decoder->pdata->power_set) && - (decoder->state == STATE_NOT_DETECTED)) { - int i; - struct tvp514x_init_seq *int_seq = - (struct tvp514x_init_seq *) - decoder->id->driver_data; - - err = decoder->pdata->power_set(on); - - /* Power Up Sequence */ - for (i = 0; i < int_seq->no_regs; i++) { - err |= tvp514x_write_reg(decoder->client, - int_seq->init_reg_seq[i].reg, - int_seq->init_reg_seq[i].val); - } - /* Detect the sensor is not already detected */ - err |= tvp514x_detect(decoder); - if (err) { - v4l_err(decoder->client, - "Unable to detect decoder\n"); - return err; - } + /* Power Up Sequence */ + err = tvp514x_write_regs(sd, int_seq); + if (err) { + v4l2_err(sd, "Unable to turn on decoder\n"); + return err; } - err |= tvp514x_configure(decoder); + /* Detect if not already detected */ + err = tvp514x_detect(sd, decoder); + if (err) { + v4l2_err(sd, "Unable to detect decoder\n"); + return err; + } + err = tvp514x_configure(sd, decoder); + if (err) { + v4l2_err(sd, "Unable to configure decoder\n"); + return err; + } + decoder->streaming = enable; break; - + } default: err = -ENODEV; break; @@ -1269,93 +1234,38 @@ static int ioctl_s_power(struct v4l2_int_device *s, enum v4l2_power on) return err; } -/** - * ioctl_init - V4L2 decoder interface handler for VIDIOC_INT_INIT - * @s: pointer to standard V4L2 device structure - * - * Initialize the decoder device (calls tvp514x_configure()) - */ -static int ioctl_init(struct v4l2_int_device *s) -{ - struct tvp514x_decoder *decoder = s->priv; - - /* Set default standard to auto */ - decoder->tvp514x_regs[REG_VIDEO_STD].val = - VIDEO_STD_AUTO_SWITCH_BIT; - - return tvp514x_configure(decoder); -} - -/** - * ioctl_dev_exit - V4L2 decoder interface handler for vidioc_int_dev_exit_num - * @s: pointer to standard V4L2 device structure - * - * Delinitialise the dev. at slave detach. The complement of ioctl_dev_init. - */ -static int ioctl_dev_exit(struct v4l2_int_device *s) -{ - return 0; -} - -/** - * ioctl_dev_init - V4L2 decoder interface handler for vidioc_int_dev_init_num - * @s: pointer to standard V4L2 device structure - * - * Initialise the device when slave attaches to the master. Returns 0 if - * TVP5146/47 device could be found, otherwise returns appropriate error. - */ -static int ioctl_dev_init(struct v4l2_int_device *s) -{ - struct tvp514x_decoder *decoder = s->priv; - int err; - - err = tvp514x_detect(decoder); - if (err < 0) { - v4l_err(decoder->client, - "Unable to detect decoder\n"); - return err; - } - - v4l_info(decoder->client, - "chip version 0x%.2x detected\n", decoder->ver); +static const struct v4l2_subdev_core_ops tvp514x_core_ops = { + .queryctrl = tvp514x_queryctrl, + .g_ctrl = tvp514x_g_ctrl, + .s_ctrl = tvp514x_s_ctrl, + .s_std = tvp514x_s_std, +}; - return 0; -} +static const struct v4l2_subdev_video_ops tvp514x_video_ops = { + .s_routing = tvp514x_s_routing, + .querystd = tvp514x_querystd, + .enum_fmt = tvp514x_enum_fmt_cap, + .g_fmt = tvp514x_g_fmt_cap, + .try_fmt = tvp514x_try_fmt_cap, + .s_fmt = tvp514x_s_fmt_cap, + .g_parm = tvp514x_g_parm, + .s_parm = tvp514x_s_parm, + .s_stream = tvp514x_s_stream, +}; -static struct v4l2_int_ioctl_desc tvp514x_ioctl_desc[] = { - {vidioc_int_dev_init_num, (v4l2_int_ioctl_func*) ioctl_dev_init}, - {vidioc_int_dev_exit_num, (v4l2_int_ioctl_func*) ioctl_dev_exit}, - {vidioc_int_s_power_num, (v4l2_int_ioctl_func*) ioctl_s_power}, - {vidioc_int_g_priv_num, (v4l2_int_ioctl_func*) ioctl_g_priv}, - {vidioc_int_g_ifparm_num, (v4l2_int_ioctl_func*) ioctl_g_ifparm}, - {vidioc_int_init_num, (v4l2_int_ioctl_func*) ioctl_init}, - {vidioc_int_enum_fmt_cap_num, - (v4l2_int_ioctl_func *) ioctl_enum_fmt_cap}, - {vidioc_int_try_fmt_cap_num, - (v4l2_int_ioctl_func *) ioctl_try_fmt_cap}, - {vidioc_int_g_fmt_cap_num, - (v4l2_int_ioctl_func *) ioctl_g_fmt_cap}, - {vidioc_int_s_fmt_cap_num, - (v4l2_int_ioctl_func *) ioctl_s_fmt_cap}, - {vidioc_int_g_parm_num, (v4l2_int_ioctl_func *) ioctl_g_parm}, - {vidioc_int_s_parm_num, (v4l2_int_ioctl_func *) ioctl_s_parm}, - {vidioc_int_queryctrl_num, - (v4l2_int_ioctl_func *) ioctl_queryctrl}, - {vidioc_int_g_ctrl_num, (v4l2_int_ioctl_func *) ioctl_g_ctrl}, - {vidioc_int_s_ctrl_num, (v4l2_int_ioctl_func *) ioctl_s_ctrl}, - {vidioc_int_querystd_num, (v4l2_int_ioctl_func *) ioctl_querystd}, - {vidioc_int_s_std_num, (v4l2_int_ioctl_func *) ioctl_s_std}, - {vidioc_int_s_video_routing_num, - (v4l2_int_ioctl_func *) ioctl_s_routing}, +static const struct v4l2_subdev_ops tvp514x_ops = { + .core = &tvp514x_core_ops, + .video = &tvp514x_video_ops, }; static struct tvp514x_decoder tvp514x_dev = { - .state = STATE_NOT_DETECTED, + .streaming = 0, .fmt_list = tvp514x_fmt_list, .num_fmts = ARRAY_SIZE(tvp514x_fmt_list), - .pix = { /* Default to NTSC 8-bit YUV 422 */ + .pix = { + /* Default to NTSC 8-bit YUV 422 */ .width = NTSC_NUM_ACTIVE_PIXELS, .height = NTSC_NUM_ACTIVE_LINES, .pixelformat = V4L2_PIX_FMT_UYVY, @@ -1369,20 +1279,13 @@ static struct tvp514x_decoder tvp514x_dev = { .current_std = STD_NTSC_MJ, .std_list = tvp514x_std_list, .num_stds = ARRAY_SIZE(tvp514x_std_list), - .v4l2_int_device = { - .module = THIS_MODULE, - .name = TVP514X_MODULE_NAME, - .type = v4l2_int_type_slave, - }, - .tvp514x_slave = { - .ioctls = tvp514x_ioctl_desc, - .num_ioctls = ARRAY_SIZE(tvp514x_ioctl_desc), - }, + }; /** - * tvp514x_probe - decoder driver i2c probe handler + * tvp514x_probe() - decoder driver i2c probe handler * @client: i2c driver client device structure + * @id: i2c driver id table * * Register decoder as an i2c client device and V4L2 * device. @@ -1391,88 +1294,71 @@ static int tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct tvp514x_decoder *decoder; - int err; + struct v4l2_subdev *sd; /* Check if the adapter supports the needed features */ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; + if (!client->dev.platform_data) { + v4l2_err(client, "No platform data!!\n"); + return -ENODEV; + } + decoder = kzalloc(sizeof(*decoder), GFP_KERNEL); if (!decoder) return -ENOMEM; - if (!client->dev.platform_data) { - v4l_err(client, "No platform data!!\n"); - err = -ENODEV; - goto out_free; - } - + /* Initialize the tvp514x_decoder with default configuration */ *decoder = tvp514x_dev; - decoder->v4l2_int_device.priv = decoder; - decoder->pdata = client->dev.platform_data; - decoder->v4l2_int_device.u.slave = &decoder->tvp514x_slave; + /* Copy default register configuration */ memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default, sizeof(tvp514x_reg_list_default)); - /* + + /* Copy board specific information here */ + decoder->pdata = client->dev.platform_data; + + /** * Fetch platform specific data, and configure the * tvp514x_reg_list[] accordingly. Since this is one * time configuration, no need to preserve. */ decoder->tvp514x_regs[REG_OUTPUT_FORMATTER2].val |= - (decoder->pdata->clk_polarity << 1); + (decoder->pdata->clk_polarity << 1); decoder->tvp514x_regs[REG_SYNC_CONTROL].val |= - ((decoder->pdata->hs_polarity << 2) | - (decoder->pdata->vs_polarity << 3)); - /* - * Save the id data, required for power up sequence - */ - decoder->id = (struct i2c_device_id *)id; - /* Attach to Master */ - strcpy(decoder->v4l2_int_device.u.slave->attach_to, - decoder->pdata->master); - decoder->client = client; - i2c_set_clientdata(client, decoder); + ((decoder->pdata->hs_polarity << 2) | + (decoder->pdata->vs_polarity << 3)); + /* Set default standard to auto */ + decoder->tvp514x_regs[REG_VIDEO_STD].val = + VIDEO_STD_AUTO_SWITCH_BIT; /* Register with V4L2 layer as slave device */ - err = v4l2_int_device_register(&decoder->v4l2_int_device); - if (err) { - i2c_set_clientdata(client, NULL); - v4l_err(client, - "Unable to register to v4l2. Err[%d]\n", err); - goto out_free; - - } else - v4l_info(client, "Registered to v4l2 master %s!!\n", - decoder->pdata->master); + sd = &decoder->sd; + v4l2_i2c_subdev_init(sd, client, &tvp514x_ops); + + v4l2_info(sd, "%s decoder driver registered !!\n", sd->name); + return 0; -out_free: - kfree(decoder); - return err; } /** - * tvp514x_remove - decoder driver i2c remove handler + * tvp514x_remove() - decoder driver i2c remove handler * @client: i2c driver client device structure * * Unregister decoder as an i2c client device and V4L2 * device. Complement of tvp514x_probe(). */ -static int __exit tvp514x_remove(struct i2c_client *client) +static int tvp514x_remove(struct i2c_client *client) { - struct tvp514x_decoder *decoder = i2c_get_clientdata(client); - - if (!client->adapter) - return -ENODEV; /* our client isn't attached */ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct tvp514x_decoder *decoder = to_decoder(sd); - v4l2_int_device_unregister(&decoder->v4l2_int_device); - i2c_set_clientdata(client, NULL); + v4l2_device_unregister_subdev(sd); kfree(decoder); return 0; } -/* - * TVP5146 Init/Power on Sequence - */ +/* TVP5146 Init/Power on Sequence */ static const struct tvp514x_reg tvp5146_init_reg_seq[] = { {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x02}, {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, @@ -1485,14 +1371,10 @@ static const struct tvp514x_reg tvp5146_init_reg_seq[] = { {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x00}, {TOK_WRITE, REG_OPERATION_MODE, 0x01}, {TOK_WRITE, REG_OPERATION_MODE, 0x00}, + {TOK_TERM, 0, 0}, }; -static const struct tvp514x_init_seq tvp5146_init = { - .no_regs = ARRAY_SIZE(tvp5146_init_reg_seq), - .init_reg_seq = tvp5146_init_reg_seq, -}; -/* - * TVP5147 Init/Power on Sequence - */ + +/* TVP5147 Init/Power on Sequence */ static const struct tvp514x_reg tvp5147_init_reg_seq[] = { {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x02}, {TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00}, @@ -1512,71 +1394,51 @@ static const struct tvp514x_reg tvp5147_init_reg_seq[] = { {TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x00}, {TOK_WRITE, REG_OPERATION_MODE, 0x01}, {TOK_WRITE, REG_OPERATION_MODE, 0x00}, + {TOK_TERM, 0, 0}, }; -static const struct tvp514x_init_seq tvp5147_init = { - .no_regs = ARRAY_SIZE(tvp5147_init_reg_seq), - .init_reg_seq = tvp5147_init_reg_seq, -}; -/* - * TVP5146M2/TVP5147M1 Init/Power on Sequence - */ + +/* TVP5146M2/TVP5147M1 Init/Power on Sequence */ static const struct tvp514x_reg tvp514xm_init_reg_seq[] = { {TOK_WRITE, REG_OPERATION_MODE, 0x01}, {TOK_WRITE, REG_OPERATION_MODE, 0x00}, + {TOK_TERM, 0, 0}, }; -static const struct tvp514x_init_seq tvp514xm_init = { - .no_regs = ARRAY_SIZE(tvp514xm_init_reg_seq), - .init_reg_seq = tvp514xm_init_reg_seq, -}; -/* + +/** * I2C Device Table - * * name - Name of the actual device/chip. * driver_data - Driver data */ static const struct i2c_device_id tvp514x_id[] = { - {"tvp5146", (unsigned long)&tvp5146_init}, - {"tvp5146m2", (unsigned long)&tvp514xm_init}, - {"tvp5147", (unsigned long)&tvp5147_init}, - {"tvp5147m1", (unsigned long)&tvp514xm_init}, + {"tvp5146", (unsigned long)tvp5146_init_reg_seq}, + {"tvp5146m2", (unsigned long)tvp514xm_init_reg_seq}, + {"tvp5147", (unsigned long)tvp5147_init_reg_seq}, + {"tvp5147m1", (unsigned long)tvp514xm_init_reg_seq}, {}, }; MODULE_DEVICE_TABLE(i2c, tvp514x_id); -static struct i2c_driver tvp514x_i2c_driver = { +static struct i2c_driver tvp514x_driver = { .driver = { - .name = TVP514X_MODULE_NAME, - .owner = THIS_MODULE, - }, + .owner = THIS_MODULE, + .name = TVP514X_MODULE_NAME, + }, .probe = tvp514x_probe, - .remove = __exit_p(tvp514x_remove), + .remove = tvp514x_remove, .id_table = tvp514x_id, }; -/** - * tvp514x_init - * - * Module init function - */ static int __init tvp514x_init(void) { - return i2c_add_driver(&tvp514x_i2c_driver); + return i2c_add_driver(&tvp514x_driver); } -/** - * tvp514x_cleanup - * - * Module exit function - */ -static void __exit tvp514x_cleanup(void) +static void __exit tvp514x_exit(void) { - i2c_del_driver(&tvp514x_i2c_driver); + i2c_del_driver(&tvp514x_driver); } module_init(tvp514x_init); -module_exit(tvp514x_cleanup); - -MODULE_AUTHOR("Texas Instruments"); -MODULE_DESCRIPTION("TVP514X linux decoder driver"); -MODULE_LICENSE("GPL"); +module_exit(tvp514x_exit); diff --git a/linux/drivers/media/video/tvp514x_regs.h b/linux/drivers/media/video/tvp514x_regs.h index 351620aee..18f29ad0d 100644 --- a/linux/drivers/media/video/tvp514x_regs.h +++ b/linux/drivers/media/video/tvp514x_regs.h @@ -284,14 +284,4 @@ struct tvp514x_reg { u32 val; }; -/** - * struct tvp514x_init_seq - Structure for TVP5146/47/46M2/47M1 power up - * Sequence. - * @ no_regs - Number of registers to write for power up sequence. - * @ init_reg_seq - Array of registers and respective value to write. - */ -struct tvp514x_init_seq { - unsigned int no_regs; - const struct tvp514x_reg *init_reg_seq; -}; #endif /* ifndef _TVP514X_REGS_H */ diff --git a/linux/drivers/media/video/tw9910.c b/linux/drivers/media/video/tw9910.c index 5c145085a..f75787594 100644 --- a/linux/drivers/media/video/tw9910.c +++ b/linux/drivers/media/video/tw9910.c @@ -879,10 +879,12 @@ static int tw9910_probe(struct i2c_client *client, const struct tw9910_scale_ctrl *scale; int i, ret; - info = client->dev.platform_data; - if (!info) + if (!client->dev.platform_data) return -EINVAL; + info = container_of(client->dev.platform_data, + struct tw9910_video_info, link); + if (!i2c_check_functionality(to_i2c_adapter(client->dev.parent), I2C_FUNC_SMBUS_BYTE_DATA)) { dev_err(&client->dev, diff --git a/linux/drivers/media/video/usbvideo/Kconfig b/linux/drivers/media/video/usbvideo/Kconfig index e4cb99c1f..adb1c044a 100644 --- a/linux/drivers/media/video/usbvideo/Kconfig +++ b/linux/drivers/media/video/usbvideo/Kconfig @@ -38,10 +38,13 @@ config USB_KONICAWC module will be called konicawc. config USB_QUICKCAM_MESSENGER - tristate "USB Logitech Quickcam Messenger" + tristate "USB Logitech Quickcam Messenger (DEPRECATED)" depends on VIDEO_V4L1 select VIDEO_USBVIDEO ---help--- + This driver is DEPRECATED please use the gspca stv06xx module + instead. + Say Y or M here to enable support for the USB Logitech Quickcam Messenger webcam. diff --git a/linux/drivers/media/video/usbvision/usbvision-video.c b/linux/drivers/media/video/usbvision/usbvision-video.c index d03e5922d..90b58914f 100644 --- a/linux/drivers/media/video/usbvision/usbvision-video.c +++ b/linux/drivers/media/video/usbvision/usbvision-video.c @@ -1794,7 +1794,7 @@ static struct usb_driver usbvision_driver = { .name = "usbvision", .id_table = usbvision_table, .probe = usbvision_probe, - .disconnect = usbvision_disconnect + .disconnect = __devexit_p(usbvision_disconnect), }; /* diff --git a/linux/drivers/media/video/uvc/uvc_ctrl.c b/linux/drivers/media/video/uvc/uvc_ctrl.c index ef55bc35a..81928f838 100644 --- a/linux/drivers/media/video/uvc/uvc_ctrl.c +++ b/linux/drivers/media/video/uvc/uvc_ctrl.c @@ -36,7 +36,7 @@ static struct uvc_control_info uvc_ctrls[] = { { .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_BRIGHTNESS_CONTROL, + .selector = UVC_PU_BRIGHTNESS_CONTROL, .index = 0, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -44,7 +44,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_CONTRAST_CONTROL, + .selector = UVC_PU_CONTRAST_CONTROL, .index = 1, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -52,7 +52,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_HUE_CONTROL, + .selector = UVC_PU_HUE_CONTROL, .index = 2, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -60,7 +60,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_SATURATION_CONTROL, + .selector = UVC_PU_SATURATION_CONTROL, .index = 3, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -68,7 +68,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_SHARPNESS_CONTROL, + .selector = UVC_PU_SHARPNESS_CONTROL, .index = 4, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -76,7 +76,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_GAMMA_CONTROL, + .selector = UVC_PU_GAMMA_CONTROL, .index = 5, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -84,7 +84,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_WHITE_BALANCE_TEMPERATURE_CONTROL, + .selector = UVC_PU_WHITE_BALANCE_TEMPERATURE_CONTROL, .index = 6, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -92,7 +92,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, + .selector = UVC_PU_WHITE_BALANCE_COMPONENT_CONTROL, .index = 7, .size = 4, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -100,7 +100,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_BACKLIGHT_COMPENSATION_CONTROL, + .selector = UVC_PU_BACKLIGHT_COMPENSATION_CONTROL, .index = 8, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -108,7 +108,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_GAIN_CONTROL, + .selector = UVC_PU_GAIN_CONTROL, .index = 9, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -116,7 +116,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_POWER_LINE_FREQUENCY_CONTROL, + .selector = UVC_PU_POWER_LINE_FREQUENCY_CONTROL, .index = 10, .size = 1, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -124,7 +124,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_HUE_AUTO_CONTROL, + .selector = UVC_PU_HUE_AUTO_CONTROL, .index = 11, .size = 1, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR @@ -132,7 +132,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL, + .selector = UVC_PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL, .index = 12, .size = 1, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR @@ -140,7 +140,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL, + .selector = UVC_PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL, .index = 13, .size = 1, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR @@ -148,7 +148,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_DIGITAL_MULTIPLIER_CONTROL, + .selector = UVC_PU_DIGITAL_MULTIPLIER_CONTROL, .index = 14, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -156,7 +156,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL, + .selector = UVC_PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL, .index = 15, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -164,21 +164,21 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_ANALOG_VIDEO_STANDARD_CONTROL, + .selector = UVC_PU_ANALOG_VIDEO_STANDARD_CONTROL, .index = 16, .size = 1, .flags = UVC_CONTROL_GET_CUR, }, { .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_ANALOG_LOCK_STATUS_CONTROL, + .selector = UVC_PU_ANALOG_LOCK_STATUS_CONTROL, .index = 17, .size = 1, .flags = UVC_CONTROL_GET_CUR, }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_SCANNING_MODE_CONTROL, + .selector = UVC_CT_SCANNING_MODE_CONTROL, .index = 0, .size = 1, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR @@ -186,7 +186,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_AE_MODE_CONTROL, + .selector = UVC_CT_AE_MODE_CONTROL, .index = 1, .size = 1, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR @@ -195,7 +195,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_AE_PRIORITY_CONTROL, + .selector = UVC_CT_AE_PRIORITY_CONTROL, .index = 2, .size = 1, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR @@ -203,7 +203,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_EXPOSURE_TIME_ABSOLUTE_CONTROL, + .selector = UVC_CT_EXPOSURE_TIME_ABSOLUTE_CONTROL, .index = 3, .size = 4, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -211,7 +211,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_EXPOSURE_TIME_RELATIVE_CONTROL, + .selector = UVC_CT_EXPOSURE_TIME_RELATIVE_CONTROL, .index = 4, .size = 1, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR @@ -219,7 +219,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_FOCUS_ABSOLUTE_CONTROL, + .selector = UVC_CT_FOCUS_ABSOLUTE_CONTROL, .index = 5, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -227,7 +227,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_FOCUS_RELATIVE_CONTROL, + .selector = UVC_CT_FOCUS_RELATIVE_CONTROL, .index = 6, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -235,7 +235,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_IRIS_ABSOLUTE_CONTROL, + .selector = UVC_CT_IRIS_ABSOLUTE_CONTROL, .index = 7, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -243,7 +243,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_IRIS_RELATIVE_CONTROL, + .selector = UVC_CT_IRIS_RELATIVE_CONTROL, .index = 8, .size = 1, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR @@ -251,7 +251,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_ZOOM_ABSOLUTE_CONTROL, + .selector = UVC_CT_ZOOM_ABSOLUTE_CONTROL, .index = 9, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -259,7 +259,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_ZOOM_RELATIVE_CONTROL, + .selector = UVC_CT_ZOOM_RELATIVE_CONTROL, .index = 10, .size = 3, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -267,7 +267,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_PANTILT_ABSOLUTE_CONTROL, + .selector = UVC_CT_PANTILT_ABSOLUTE_CONTROL, .index = 11, .size = 8, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -275,7 +275,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_PANTILT_RELATIVE_CONTROL, + .selector = UVC_CT_PANTILT_RELATIVE_CONTROL, .index = 12, .size = 4, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -283,7 +283,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_ROLL_ABSOLUTE_CONTROL, + .selector = UVC_CT_ROLL_ABSOLUTE_CONTROL, .index = 13, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -291,7 +291,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_ROLL_RELATIVE_CONTROL, + .selector = UVC_CT_ROLL_RELATIVE_CONTROL, .index = 14, .size = 2, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE @@ -299,7 +299,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_FOCUS_AUTO_CONTROL, + .selector = UVC_CT_FOCUS_AUTO_CONTROL, .index = 17, .size = 1, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR @@ -307,7 +307,7 @@ static struct uvc_control_info uvc_ctrls[] = { }, { .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_PRIVACY_CONTROL, + .selector = UVC_CT_PRIVACY_CONTROL, .index = 18, .size = 1, .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR @@ -334,13 +334,13 @@ static __s32 uvc_ctrl_get_zoom(struct uvc_control_mapping *mapping, __s8 zoom = (__s8)data[0]; switch (query) { - case GET_CUR: + case UVC_GET_CUR: return (zoom == 0) ? 0 : (zoom > 0 ? data[2] : -data[2]); - case GET_MIN: - case GET_MAX: - case GET_RES: - case GET_DEF: + case UVC_GET_MIN: + case UVC_GET_MAX: + case UVC_GET_RES: + case UVC_GET_DEF: default: return data[2]; } @@ -358,7 +358,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_BRIGHTNESS, .name = "Brightness", .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_BRIGHTNESS_CONTROL, + .selector = UVC_PU_BRIGHTNESS_CONTROL, .size = 16, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_INTEGER, @@ -368,7 +368,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_CONTRAST, .name = "Contrast", .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_CONTRAST_CONTROL, + .selector = UVC_PU_CONTRAST_CONTROL, .size = 16, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_INTEGER, @@ -378,7 +378,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_HUE, .name = "Hue", .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_HUE_CONTROL, + .selector = UVC_PU_HUE_CONTROL, .size = 16, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_INTEGER, @@ -388,7 +388,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_SATURATION, .name = "Saturation", .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_SATURATION_CONTROL, + .selector = UVC_PU_SATURATION_CONTROL, .size = 16, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_INTEGER, @@ -398,7 +398,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_SHARPNESS, .name = "Sharpness", .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_SHARPNESS_CONTROL, + .selector = UVC_PU_SHARPNESS_CONTROL, .size = 16, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_INTEGER, @@ -408,7 +408,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_GAMMA, .name = "Gamma", .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_GAMMA_CONTROL, + .selector = UVC_PU_GAMMA_CONTROL, .size = 16, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_INTEGER, @@ -418,7 +418,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_BACKLIGHT_COMPENSATION, .name = "Backlight Compensation", .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_BACKLIGHT_COMPENSATION_CONTROL, + .selector = UVC_PU_BACKLIGHT_COMPENSATION_CONTROL, .size = 16, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_INTEGER, @@ -428,7 +428,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_GAIN, .name = "Gain", .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_GAIN_CONTROL, + .selector = UVC_PU_GAIN_CONTROL, .size = 16, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_INTEGER, @@ -438,7 +438,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_POWER_LINE_FREQUENCY, .name = "Power Line Frequency", .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_POWER_LINE_FREQUENCY_CONTROL, + .selector = UVC_PU_POWER_LINE_FREQUENCY_CONTROL, .size = 2, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_MENU, @@ -450,7 +450,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_HUE_AUTO, .name = "Hue, Auto", .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_HUE_AUTO_CONTROL, + .selector = UVC_PU_HUE_AUTO_CONTROL, .size = 1, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, @@ -460,7 +460,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_EXPOSURE_AUTO, .name = "Exposure, Auto", .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_AE_MODE_CONTROL, + .selector = UVC_CT_AE_MODE_CONTROL, .size = 4, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_MENU, @@ -472,7 +472,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_EXPOSURE_AUTO_PRIORITY, .name = "Exposure, Auto Priority", .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_AE_PRIORITY_CONTROL, + .selector = UVC_CT_AE_PRIORITY_CONTROL, .size = 1, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, @@ -482,7 +482,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_EXPOSURE_ABSOLUTE, .name = "Exposure (Absolute)", .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_EXPOSURE_TIME_ABSOLUTE_CONTROL, + .selector = UVC_CT_EXPOSURE_TIME_ABSOLUTE_CONTROL, .size = 32, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_INTEGER, @@ -492,7 +492,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_AUTO_WHITE_BALANCE, .name = "White Balance Temperature, Auto", .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL, + .selector = UVC_PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL, .size = 1, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, @@ -502,7 +502,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_WHITE_BALANCE_TEMPERATURE, .name = "White Balance Temperature", .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_WHITE_BALANCE_TEMPERATURE_CONTROL, + .selector = UVC_PU_WHITE_BALANCE_TEMPERATURE_CONTROL, .size = 16, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_INTEGER, @@ -512,7 +512,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_AUTO_WHITE_BALANCE, .name = "White Balance Component, Auto", .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL, + .selector = UVC_PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL, .size = 1, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, @@ -522,7 +522,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_BLUE_BALANCE, .name = "White Balance Blue Component", .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, + .selector = UVC_PU_WHITE_BALANCE_COMPONENT_CONTROL, .size = 16, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_INTEGER, @@ -532,7 +532,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_RED_BALANCE, .name = "White Balance Red Component", .entity = UVC_GUID_UVC_PROCESSING, - .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, + .selector = UVC_PU_WHITE_BALANCE_COMPONENT_CONTROL, .size = 16, .offset = 16, .v4l2_type = V4L2_CTRL_TYPE_INTEGER, @@ -542,7 +542,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_FOCUS_ABSOLUTE, .name = "Focus (absolute)", .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_FOCUS_ABSOLUTE_CONTROL, + .selector = UVC_CT_FOCUS_ABSOLUTE_CONTROL, .size = 16, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_INTEGER, @@ -552,7 +552,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_FOCUS_AUTO, .name = "Focus, Auto", .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_FOCUS_AUTO_CONTROL, + .selector = UVC_CT_FOCUS_AUTO_CONTROL, .size = 1, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, @@ -562,7 +562,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_ZOOM_ABSOLUTE, .name = "Zoom, Absolute", .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_ZOOM_ABSOLUTE_CONTROL, + .selector = UVC_CT_ZOOM_ABSOLUTE_CONTROL, .size = 16, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_INTEGER, @@ -572,7 +572,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_ZOOM_CONTINUOUS, .name = "Zoom, Continuous", .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_ZOOM_RELATIVE_CONTROL, + .selector = UVC_CT_ZOOM_RELATIVE_CONTROL, .size = 0, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_INTEGER, @@ -584,7 +584,7 @@ static struct uvc_control_mapping uvc_ctrl_mappings[] = { .id = V4L2_CID_PRIVACY, .name = "Privacy", .entity = UVC_GUID_UVC_CAMERA, - .selector = CT_PRIVACY_CONTROL, + .selector = UVC_CT_PRIVACY_CONTROL, .size = 1, .offset = 0, .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, @@ -677,16 +677,16 @@ static const __u8 uvc_media_transport_input_guid[16] = static int uvc_entity_match_guid(struct uvc_entity *entity, __u8 guid[16]) { switch (UVC_ENTITY_TYPE(entity)) { - case ITT_CAMERA: + case UVC_ITT_CAMERA: return memcmp(uvc_camera_guid, guid, 16) == 0; - case ITT_MEDIA_TRANSPORT_INPUT: + case UVC_ITT_MEDIA_TRANSPORT_INPUT: return memcmp(uvc_media_transport_input_guid, guid, 16) == 0; - case VC_PROCESSING_UNIT: + case UVC_VC_PROCESSING_UNIT: return memcmp(uvc_processing_guid, guid, 16) == 0; - case VC_EXTENSION_UNIT: + case UVC_VC_EXTENSION_UNIT: return memcmp(entity->extension.guidExtensionCode, guid, 16) == 0; @@ -795,11 +795,13 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video, v4l2_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; if (ctrl->info->flags & UVC_CONTROL_GET_DEF) { - if ((ret = uvc_query_ctrl(video->dev, GET_DEF, ctrl->entity->id, - video->dev->intfnum, ctrl->info->selector, - data, ctrl->info->size)) < 0) + ret = uvc_query_ctrl(video->dev, UVC_GET_DEF, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, data, + ctrl->info->size); + if (ret < 0) goto out; - v4l2_ctrl->default_value = mapping->get(mapping, GET_DEF, data); + v4l2_ctrl->default_value = + mapping->get(mapping, UVC_GET_DEF, data); } switch (mapping->v4l2_type) { @@ -831,25 +833,28 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video, } if (ctrl->info->flags & UVC_CONTROL_GET_MIN) { - if ((ret = uvc_query_ctrl(video->dev, GET_MIN, ctrl->entity->id, - video->dev->intfnum, ctrl->info->selector, - data, ctrl->info->size)) < 0) + ret = uvc_query_ctrl(video->dev, UVC_GET_MIN, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, data, + ctrl->info->size); + if (ret < 0) goto out; - v4l2_ctrl->minimum = mapping->get(mapping, GET_MIN, data); + v4l2_ctrl->minimum = mapping->get(mapping, UVC_GET_MIN, data); } if (ctrl->info->flags & UVC_CONTROL_GET_MAX) { - if ((ret = uvc_query_ctrl(video->dev, GET_MAX, ctrl->entity->id, - video->dev->intfnum, ctrl->info->selector, - data, ctrl->info->size)) < 0) + ret = uvc_query_ctrl(video->dev, UVC_GET_MAX, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, data, + ctrl->info->size); + if (ret < 0) goto out; - v4l2_ctrl->maximum = mapping->get(mapping, GET_MAX, data); + v4l2_ctrl->maximum = mapping->get(mapping, UVC_GET_MAX, data); } if (ctrl->info->flags & UVC_CONTROL_GET_RES) { - if ((ret = uvc_query_ctrl(video->dev, GET_RES, ctrl->entity->id, - video->dev->intfnum, ctrl->info->selector, - data, ctrl->info->size)) < 0) + ret = uvc_query_ctrl(video->dev, UVC_GET_RES, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, data, + ctrl->info->size); + if (ret < 0) goto out; - v4l2_ctrl->step = mapping->get(mapping, GET_RES, data); + v4l2_ctrl->step = mapping->get(mapping, UVC_GET_RES, data); } ret = 0; @@ -914,7 +919,7 @@ static int uvc_ctrl_commit_entity(struct uvc_device *dev, continue; if (!rollback) - ret = uvc_query_ctrl(dev, SET_CUR, ctrl->entity->id, + ret = uvc_query_ctrl(dev, UVC_SET_CUR, ctrl->entity->id, dev->intfnum, ctrl->info->selector, uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), ctrl->info->size); @@ -976,7 +981,7 @@ int uvc_ctrl_get(struct uvc_video_device *video, return -EINVAL; if (!ctrl->loaded) { - ret = uvc_query_ctrl(video->dev, GET_CUR, ctrl->entity->id, + ret = uvc_query_ctrl(video->dev, UVC_GET_CUR, ctrl->entity->id, video->dev->intfnum, ctrl->info->selector, uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), ctrl->info->size); @@ -986,7 +991,7 @@ int uvc_ctrl_get(struct uvc_video_device *video, ctrl->loaded = 1; } - xctrl->value = mapping->get(mapping, GET_CUR, + xctrl->value = mapping->get(mapping, UVC_GET_CUR, uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT)); if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) { @@ -1025,7 +1030,7 @@ int uvc_ctrl_set(struct uvc_video_device *video, memset(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), 0, ctrl->info->size); } else { - ret = uvc_query_ctrl(video->dev, GET_CUR, + ret = uvc_query_ctrl(video->dev, UVC_GET_CUR, ctrl->entity->id, video->dev->intfnum, ctrl->info->selector, uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), @@ -1117,9 +1122,9 @@ int uvc_xu_ctrl_query(struct uvc_video_device *video, goto out; } - ret = uvc_query_ctrl(video->dev, set ? SET_CUR : GET_CUR, xctrl->unit, - video->dev->intfnum, xctrl->selector, data, - xctrl->size); + ret = uvc_query_ctrl(video->dev, set ? UVC_SET_CUR : UVC_GET_CUR, + xctrl->unit, video->dev->intfnum, xctrl->selector, + data, xctrl->size); if (ret < 0) goto out; @@ -1213,7 +1218,7 @@ static void uvc_ctrl_add_ctrl(struct uvc_device *dev, if (!found) return; - if (UVC_ENTITY_TYPE(entity) == VC_EXTENSION_UNIT) { + if (UVC_ENTITY_TYPE(entity) == UVC_VC_EXTENSION_UNIT) { /* Check if the device control information and length match * the user supplied information. */ @@ -1221,8 +1226,9 @@ static void uvc_ctrl_add_ctrl(struct uvc_device *dev, __le16 size; __u8 inf; - if ((ret = uvc_query_ctrl(dev, GET_LEN, ctrl->entity->id, - dev->intfnum, info->selector, (__u8 *)&size, 2)) < 0) { + ret = uvc_query_ctrl(dev, UVC_GET_LEN, ctrl->entity->id, + dev->intfnum, info->selector, (__u8 *)&size, 2); + if (ret < 0) { uvc_trace(UVC_TRACE_CONTROL, "GET_LEN failed on " "control " UVC_GUID_FORMAT "/%u (%d).\n", UVC_GUID_ARGS(info->entity), info->selector, @@ -1238,8 +1244,9 @@ static void uvc_ctrl_add_ctrl(struct uvc_device *dev, return; } - if ((ret = uvc_query_ctrl(dev, GET_INFO, ctrl->entity->id, - dev->intfnum, info->selector, &inf, 1)) < 0) { + ret = uvc_query_ctrl(dev, UVC_GET_INFO, ctrl->entity->id, + dev->intfnum, info->selector, &inf, 1); + if (ret < 0) { uvc_trace(UVC_TRACE_CONTROL, "GET_INFO failed on " "control " UVC_GUID_FORMAT "/%u (%d).\n", UVC_GUID_ARGS(info->entity), info->selector, @@ -1393,7 +1400,7 @@ uvc_ctrl_prune_entity(struct uvc_device *dev, struct uvc_entity *entity) unsigned int size; unsigned int i; - if (UVC_ENTITY_TYPE(entity) != VC_PROCESSING_UNIT) + if (UVC_ENTITY_TYPE(entity) != UVC_VC_PROCESSING_UNIT) return; controls = entity->processing.bmControls; @@ -1429,13 +1436,13 @@ int uvc_ctrl_init_device(struct uvc_device *dev) unsigned int bControlSize = 0, ncontrols = 0; __u8 *bmControls = NULL; - if (UVC_ENTITY_TYPE(entity) == VC_EXTENSION_UNIT) { + if (UVC_ENTITY_TYPE(entity) == UVC_VC_EXTENSION_UNIT) { bmControls = entity->extension.bmControls; bControlSize = entity->extension.bControlSize; - } else if (UVC_ENTITY_TYPE(entity) == VC_PROCESSING_UNIT) { + } else if (UVC_ENTITY_TYPE(entity) == UVC_VC_PROCESSING_UNIT) { bmControls = entity->processing.bmControls; bControlSize = entity->processing.bControlSize; - } else if (UVC_ENTITY_TYPE(entity) == ITT_CAMERA) { + } else if (UVC_ENTITY_TYPE(entity) == UVC_ITT_CAMERA) { bmControls = entity->camera.bmControls; bControlSize = entity->camera.bControlSize; } diff --git a/linux/drivers/media/video/uvc/uvc_driver.c b/linux/drivers/media/video/uvc/uvc_driver.c index 40df6828f..f7b76884d 100644 --- a/linux/drivers/media/video/uvc/uvc_driver.c +++ b/linux/drivers/media/video/uvc/uvc_driver.c @@ -249,23 +249,23 @@ static struct uvc_entity *uvc_entity_by_reference(struct uvc_device *dev, list_for_each_entry_continue(entity, &dev->entities, list) { switch (UVC_ENTITY_TYPE(entity)) { - case TT_STREAMING: + case UVC_TT_STREAMING: if (entity->output.bSourceID == id) return entity; break; - case VC_PROCESSING_UNIT: + case UVC_VC_PROCESSING_UNIT: if (entity->processing.bSourceID == id) return entity; break; - case VC_SELECTOR_UNIT: + case UVC_VC_SELECTOR_UNIT: for (i = 0; i < entity->selector.bNrInPins; ++i) if (entity->selector.baSourceID[i] == id) return entity; break; - case VC_EXTENSION_UNIT: + case UVC_VC_EXTENSION_UNIT: for (i = 0; i < entity->extension.bNrInPins; ++i) if (entity->extension.baSourceID[i] == id) return entity; @@ -297,9 +297,9 @@ static int uvc_parse_format(struct uvc_device *dev, format->index = buffer[3]; switch (buffer[2]) { - case VS_FORMAT_UNCOMPRESSED: - case VS_FORMAT_FRAME_BASED: - n = buffer[2] == VS_FORMAT_UNCOMPRESSED ? 27 : 28; + case UVC_VS_FORMAT_UNCOMPRESSED: + case UVC_VS_FORMAT_FRAME_BASED: + n = buffer[2] == UVC_VS_FORMAT_UNCOMPRESSED ? 27 : 28; if (buflen < n) { uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d FORMAT error\n", @@ -325,16 +325,16 @@ static int uvc_parse_format(struct uvc_device *dev, } format->bpp = buffer[21]; - if (buffer[2] == VS_FORMAT_UNCOMPRESSED) { - ftype = VS_FRAME_UNCOMPRESSED; + if (buffer[2] == UVC_VS_FORMAT_UNCOMPRESSED) { + ftype = UVC_VS_FRAME_UNCOMPRESSED; } else { - ftype = VS_FRAME_FRAME_BASED; + ftype = UVC_VS_FRAME_FRAME_BASED; if (buffer[27]) format->flags = UVC_FMT_FLAG_COMPRESSED; } break; - case VS_FORMAT_MJPEG: + case UVC_VS_FORMAT_MJPEG: if (buflen < 11) { uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d FORMAT error\n", @@ -347,10 +347,10 @@ static int uvc_parse_format(struct uvc_device *dev, format->fcc = V4L2_PIX_FMT_MJPEG; format->flags = UVC_FMT_FLAG_COMPRESSED; format->bpp = 0; - ftype = VS_FRAME_MJPEG; + ftype = UVC_VS_FRAME_MJPEG; break; - case VS_FORMAT_DV: + case UVC_VS_FORMAT_DV: if (buflen < 9) { uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d FORMAT error\n", @@ -395,8 +395,8 @@ static int uvc_parse_format(struct uvc_device *dev, format->nframes = 1; break; - case VS_FORMAT_MPEG2TS: - case VS_FORMAT_STREAM_BASED: + case UVC_VS_FORMAT_MPEG2TS: + case UVC_VS_FORMAT_STREAM_BASED: /* Not supported yet. */ default: uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " @@ -416,7 +416,7 @@ static int uvc_parse_format(struct uvc_device *dev, */ while (buflen > 2 && buffer[2] == ftype) { frame = &format->frame[format->nframes]; - if (ftype != VS_FRAME_FRAME_BASED) + if (ftype != UVC_VS_FRAME_FRAME_BASED) n = buflen > 25 ? buffer[25] : 0; else n = buflen > 21 ? buffer[21] : 0; @@ -436,7 +436,7 @@ static int uvc_parse_format(struct uvc_device *dev, frame->wHeight = get_unaligned_le16(&buffer[7]); frame->dwMinBitRate = get_unaligned_le32(&buffer[9]); frame->dwMaxBitRate = get_unaligned_le32(&buffer[13]); - if (ftype != VS_FRAME_FRAME_BASED) { + if (ftype != UVC_VS_FRAME_FRAME_BASED) { frame->dwMaxVideoFrameBufferSize = get_unaligned_le32(&buffer[17]); frame->dwDefaultFrameInterval = @@ -491,12 +491,12 @@ static int uvc_parse_format(struct uvc_device *dev, buffer += buffer[0]; } - if (buflen > 2 && buffer[2] == VS_STILL_IMAGE_FRAME) { + if (buflen > 2 && buffer[2] == UVC_VS_STILL_IMAGE_FRAME) { buflen -= buffer[0]; buffer += buffer[0]; } - if (buflen > 2 && buffer[2] == VS_COLORFORMAT) { + if (buflen > 2 && buffer[2] == UVC_VS_COLORFORMAT) { if (buflen < 6) { uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d COLORFORMAT error\n", @@ -530,7 +530,7 @@ static int uvc_parse_streaming(struct uvc_device *dev, int ret = -EINVAL; if (intf->cur_altsetting->desc.bInterfaceSubClass - != SC_VIDEOSTREAMING) { + != UVC_SC_VIDEOSTREAMING) { uvc_trace(UVC_TRACE_DESCR, "device %d interface %d isn't a " "video streaming interface\n", dev->udev->devnum, intf->altsetting[0].desc.bInterfaceNumber); @@ -589,12 +589,12 @@ static int uvc_parse_streaming(struct uvc_device *dev, /* Parse the header descriptor. */ switch (buffer[2]) { - case VS_OUTPUT_HEADER: + case UVC_VS_OUTPUT_HEADER: streaming->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; size = 9; break; - case VS_INPUT_HEADER: + case UVC_VS_INPUT_HEADER: streaming->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; size = 13; break; @@ -618,7 +618,7 @@ static int uvc_parse_streaming(struct uvc_device *dev, streaming->header.bNumFormats = p; streaming->header.bEndpointAddress = buffer[6]; - if (buffer[2] == VS_INPUT_HEADER) { + if (buffer[2] == UVC_VS_INPUT_HEADER) { streaming->header.bmInfo = buffer[7]; streaming->header.bTerminalLink = buffer[8]; streaming->header.bStillCaptureMethod = buffer[9]; @@ -644,15 +644,15 @@ static int uvc_parse_streaming(struct uvc_device *dev, _buflen = buflen; /* Count the format and frame descriptors. */ - while (_buflen > 2 && _buffer[1] == CS_INTERFACE) { + while (_buflen > 2 && _buffer[1] == USB_DT_CS_INTERFACE) { switch (_buffer[2]) { - case VS_FORMAT_UNCOMPRESSED: - case VS_FORMAT_MJPEG: - case VS_FORMAT_FRAME_BASED: + case UVC_VS_FORMAT_UNCOMPRESSED: + case UVC_VS_FORMAT_MJPEG: + case UVC_VS_FORMAT_FRAME_BASED: nformats++; break; - case VS_FORMAT_DV: + case UVC_VS_FORMAT_DV: /* DV format has no frame descriptor. We will create a * dummy frame descriptor with a dummy frame interval. */ @@ -661,22 +661,22 @@ static int uvc_parse_streaming(struct uvc_device *dev, nintervals++; break; - case VS_FORMAT_MPEG2TS: - case VS_FORMAT_STREAM_BASED: + case UVC_VS_FORMAT_MPEG2TS: + case UVC_VS_FORMAT_STREAM_BASED: uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d FORMAT %u is not supported.\n", dev->udev->devnum, alts->desc.bInterfaceNumber, _buffer[2]); break; - case VS_FRAME_UNCOMPRESSED: - case VS_FRAME_MJPEG: + case UVC_VS_FRAME_UNCOMPRESSED: + case UVC_VS_FRAME_MJPEG: nframes++; if (_buflen > 25) nintervals += _buffer[25] ? _buffer[25] : 3; break; - case VS_FRAME_FRAME_BASED: + case UVC_VS_FRAME_FRAME_BASED: nframes++; if (_buflen > 21) nintervals += _buffer[21] ? _buffer[21] : 3; @@ -709,12 +709,12 @@ static int uvc_parse_streaming(struct uvc_device *dev, streaming->nformats = nformats; /* Parse the format descriptors. */ - while (buflen > 2 && buffer[1] == CS_INTERFACE) { + while (buflen > 2 && buffer[1] == USB_DT_CS_INTERFACE) { switch (buffer[2]) { - case VS_FORMAT_UNCOMPRESSED: - case VS_FORMAT_MJPEG: - case VS_FORMAT_DV: - case VS_FORMAT_FRAME_BASED: + case UVC_VS_FORMAT_UNCOMPRESSED: + case UVC_VS_FORMAT_MJPEG: + case UVC_VS_FORMAT_DV: + case UVC_VS_FORMAT_FRAME_BASED: format->frame = frame; ret = uvc_parse_format(dev, streaming, format, &interval, buffer, buflen); @@ -819,7 +819,7 @@ static int uvc_parse_vendor_control(struct uvc_device *dev, return -ENOMEM; unit->id = buffer[3]; - unit->type = VC_EXTENSION_UNIT; + unit->type = UVC_VC_EXTENSION_UNIT; memcpy(unit->extension.guidExtensionCode, &buffer[4], 16); unit->extension.bNumControls = buffer[20]; unit->extension.bNrInPins = get_unaligned_le16(&buffer[21]); @@ -856,7 +856,7 @@ static int uvc_parse_standard_control(struct uvc_device *dev, __u16 type; switch (buffer[2]) { - case VC_HEADER: + case UVC_VC_HEADER: n = buflen >= 12 ? buffer[11] : 0; if (buflen < 12 || buflen < 12 + n) { @@ -883,7 +883,7 @@ static int uvc_parse_standard_control(struct uvc_device *dev, } break; - case VC_INPUT_TERMINAL: + case UVC_VC_INPUT_TERMINAL: if (buflen < 8) { uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " "interface %d INPUT_TERMINAL error\n", @@ -908,11 +908,11 @@ static int uvc_parse_standard_control(struct uvc_device *dev, p = 0; len = 8; - if (type == ITT_CAMERA) { + if (type == UVC_ITT_CAMERA) { n = buflen >= 15 ? buffer[14] : 0; len = 15; - } else if (type == ITT_MEDIA_TRANSPORT_INPUT) { + } else if (type == UVC_ITT_MEDIA_TRANSPORT_INPUT) { n = buflen >= 9 ? buffer[8] : 0; p = buflen >= 10 + n ? buffer[9+n] : 0; len = 10; @@ -932,7 +932,7 @@ static int uvc_parse_standard_control(struct uvc_device *dev, term->id = buffer[3]; term->type = type | UVC_TERM_INPUT; - if (UVC_ENTITY_TYPE(term) == ITT_CAMERA) { + if (UVC_ENTITY_TYPE(term) == UVC_ITT_CAMERA) { term->camera.bControlSize = n; term->camera.bmControls = (__u8 *)term + sizeof *term; term->camera.wObjectiveFocalLengthMin = @@ -942,7 +942,8 @@ static int uvc_parse_standard_control(struct uvc_device *dev, term->camera.wOcularFocalLength = get_unaligned_le16(&buffer[12]); memcpy(term->camera.bmControls, &buffer[15], n); - } else if (UVC_ENTITY_TYPE(term) == ITT_MEDIA_TRANSPORT_INPUT) { + } else if (UVC_ENTITY_TYPE(term) == + UVC_ITT_MEDIA_TRANSPORT_INPUT) { term->media.bControlSize = n; term->media.bmControls = (__u8 *)term + sizeof *term; term->media.bTransportModeSize = p; @@ -955,9 +956,9 @@ static int uvc_parse_standard_control(struct uvc_device *dev, if (buffer[7] != 0) usb_string(udev, buffer[7], term->name, sizeof term->name); - else if (UVC_ENTITY_TYPE(term) == ITT_CAMERA) + else if (UVC_ENTITY_TYPE(term) == UVC_ITT_CAMERA) sprintf(term->name, "Camera %u", buffer[3]); - else if (UVC_ENTITY_TYPE(term) == ITT_MEDIA_TRANSPORT_INPUT) + else if (UVC_ENTITY_TYPE(term) == UVC_ITT_MEDIA_TRANSPORT_INPUT) sprintf(term->name, "Media %u", buffer[3]); else sprintf(term->name, "Input %u", buffer[3]); @@ -965,7 +966,7 @@ static int uvc_parse_standard_control(struct uvc_device *dev, list_add_tail(&term->list, &dev->entities); break; - case VC_OUTPUT_TERMINAL: + case UVC_VC_OUTPUT_TERMINAL: if (buflen < 9) { uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " "interface %d OUTPUT_TERMINAL error\n", @@ -1002,7 +1003,7 @@ static int uvc_parse_standard_control(struct uvc_device *dev, list_add_tail(&term->list, &dev->entities); break; - case VC_SELECTOR_UNIT: + case UVC_VC_SELECTOR_UNIT: p = buflen >= 5 ? buffer[4] : 0; if (buflen < 5 || buflen < 6 + p) { @@ -1031,7 +1032,7 @@ static int uvc_parse_standard_control(struct uvc_device *dev, list_add_tail(&unit->list, &dev->entities); break; - case VC_PROCESSING_UNIT: + case UVC_VC_PROCESSING_UNIT: n = buflen >= 8 ? buffer[7] : 0; p = dev->uvc_version >= 0x0110 ? 10 : 9; @@ -1066,7 +1067,7 @@ static int uvc_parse_standard_control(struct uvc_device *dev, list_add_tail(&unit->list, &dev->entities); break; - case VC_EXTENSION_UNIT: + case UVC_VC_EXTENSION_UNIT: p = buflen >= 22 ? buffer[21] : 0; n = buflen >= 24 + p ? buffer[22+p] : 0; @@ -1194,7 +1195,7 @@ static int uvc_scan_chain_entity(struct uvc_video_device *video, struct uvc_entity *entity) { switch (UVC_ENTITY_TYPE(entity)) { - case VC_EXTENSION_UNIT: + case UVC_VC_EXTENSION_UNIT: if (uvc_trace_param & UVC_TRACE_PROBE) printk(" <- XU %d", entity->id); @@ -1207,7 +1208,7 @@ static int uvc_scan_chain_entity(struct uvc_video_device *video, list_add_tail(&entity->chain, &video->extensions); break; - case VC_PROCESSING_UNIT: + case UVC_VC_PROCESSING_UNIT: if (uvc_trace_param & UVC_TRACE_PROBE) printk(" <- PU %d", entity->id); @@ -1220,7 +1221,7 @@ static int uvc_scan_chain_entity(struct uvc_video_device *video, video->processing = entity; break; - case VC_SELECTOR_UNIT: + case UVC_VC_SELECTOR_UNIT: if (uvc_trace_param & UVC_TRACE_PROBE) printk(" <- SU %d", entity->id); @@ -1237,16 +1238,16 @@ static int uvc_scan_chain_entity(struct uvc_video_device *video, video->selector = entity; break; - case ITT_VENDOR_SPECIFIC: - case ITT_CAMERA: - case ITT_MEDIA_TRANSPORT_INPUT: + case UVC_ITT_VENDOR_SPECIFIC: + case UVC_ITT_CAMERA: + case UVC_ITT_MEDIA_TRANSPORT_INPUT: if (uvc_trace_param & UVC_TRACE_PROBE) printk(" <- IT %d\n", entity->id); list_add_tail(&entity->chain, &video->iterms); break; - case TT_STREAMING: + case UVC_TT_STREAMING: if (uvc_trace_param & UVC_TRACE_PROBE) printk(" <- IT %d\n", entity->id); @@ -1291,7 +1292,7 @@ static int uvc_scan_chain_forward(struct uvc_video_device *video, if (forward == NULL) break; - if (UVC_ENTITY_TYPE(forward) != VC_EXTENSION_UNIT || + if (UVC_ENTITY_TYPE(forward) != UVC_VC_EXTENSION_UNIT || forward == prev) continue; @@ -1323,15 +1324,15 @@ static int uvc_scan_chain_backward(struct uvc_video_device *video, int id = -1, i; switch (UVC_ENTITY_TYPE(entity)) { - case VC_EXTENSION_UNIT: + case UVC_VC_EXTENSION_UNIT: id = entity->extension.baSourceID[0]; break; - case VC_PROCESSING_UNIT: + case UVC_VC_PROCESSING_UNIT: id = entity->processing.bSourceID; break; - case VC_SELECTOR_UNIT: + case UVC_VC_SELECTOR_UNIT: /* Single-input selector units are ignored. */ if (entity->selector.bNrInPins == 1) { id = entity->selector.baSourceID[0]; @@ -1377,7 +1378,7 @@ static int uvc_scan_chain(struct uvc_video_device *video) entity = video->oterm; uvc_trace(UVC_TRACE_PROBE, "Scanning UVC chain: OT %d", entity->id); - if (UVC_ENTITY_TYPE(entity) == TT_STREAMING) + if (UVC_ENTITY_TYPE(entity) == UVC_TT_STREAMING) video->sterm = entity; id = entity->output.bSourceID; @@ -1664,7 +1665,8 @@ static void uvc_disconnect(struct usb_interface *intf) */ usb_set_intfdata(intf, NULL); - if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOSTREAMING) + if (intf->cur_altsetting->desc.bInterfaceSubClass == + UVC_SC_VIDEOSTREAMING) return; /* uvc_v4l2_open() might race uvc_disconnect(). A static driver-wide @@ -1692,7 +1694,8 @@ static int uvc_suspend(struct usb_interface *intf, pm_message_t message) intf->cur_altsetting->desc.bInterfaceNumber); /* Controls are cached on the fly so they don't need to be saved. */ - if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) + if (intf->cur_altsetting->desc.bInterfaceSubClass == + UVC_SC_VIDEOCONTROL) return uvc_status_suspend(dev); if (dev->video.streaming->intf != intf) { @@ -1711,7 +1714,8 @@ static int __uvc_resume(struct usb_interface *intf, int reset) uvc_trace(UVC_TRACE_SUSPEND, "Resuming interface %u\n", intf->cur_altsetting->desc.bInterfaceNumber); - if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) { + if (intf->cur_altsetting->desc.bInterfaceSubClass == + UVC_SC_VIDEOCONTROL) { if (reset) { int ret = uvc_ctrl_resume_device(dev); @@ -1927,7 +1931,8 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceClass = USB_CLASS_VIDEO, .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, - .driver_info = UVC_QUIRK_PROBE_EXTRAFIELDS }, + .driver_info = UVC_QUIRK_PROBE_MINMAX + | UVC_QUIRK_PROBE_EXTRAFIELDS }, /* Ecamm Pico iMage */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, diff --git a/linux/drivers/media/video/uvc/uvc_v4l2.c b/linux/drivers/media/video/uvc/uvc_v4l2.c index 736d8ae23..31a9ed4ff 100644 --- a/linux/drivers/media/video/uvc/uvc_v4l2.c +++ b/linux/drivers/media/video/uvc/uvc_v4l2.c @@ -538,7 +538,10 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) memset(&xctrl, 0, sizeof xctrl); xctrl.id = ctrl->id; - uvc_ctrl_begin(video); + ret = uvc_ctrl_begin(video); + if (ret < 0) + return ret; + ret = uvc_ctrl_get(video, &xctrl); uvc_ctrl_rollback(video); if (ret >= 0) @@ -555,7 +558,10 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) xctrl.id = ctrl->id; xctrl.value = ctrl->value; - uvc_ctrl_begin(video); + ret = uvc_ctrl_begin(video); + if (ret < 0) + return ret; + ret = uvc_ctrl_set(video, &xctrl); if (ret < 0) { uvc_ctrl_rollback(video); @@ -574,7 +580,10 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) struct v4l2_ext_control *ctrl = ctrls->controls; unsigned int i; - uvc_ctrl_begin(video); + ret = uvc_ctrl_begin(video); + if (ret < 0) + return ret; + for (i = 0; i < ctrls->count; ++ctrl, ++i) { ret = uvc_ctrl_get(video, ctrl); if (ret < 0) { @@ -647,7 +656,7 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) memset(input, 0, sizeof *input); input->index = index; strlcpy(input->name, iterm->name, sizeof input->name); - if (UVC_ENTITY_TYPE(iterm) == ITT_CAMERA) + if (UVC_ENTITY_TYPE(iterm) == UVC_ITT_CAMERA) input->type = V4L2_INPUT_TYPE_CAMERA; break; } @@ -662,9 +671,9 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) break; } - ret = uvc_query_ctrl(video->dev, GET_CUR, video->selector->id, - video->dev->intfnum, SU_INPUT_SELECT_CONTROL, - &input, 1); + ret = uvc_query_ctrl(video->dev, UVC_GET_CUR, + video->selector->id, video->dev->intfnum, + UVC_SU_INPUT_SELECT_CONTROL, &input, 1); if (ret < 0) return ret; @@ -689,9 +698,9 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) if (input == 0 || input > video->selector->selector.bNrInPins) return -EINVAL; - return uvc_query_ctrl(video->dev, SET_CUR, video->selector->id, - video->dev->intfnum, SU_INPUT_SELECT_CONTROL, - &input, 1); + return uvc_query_ctrl(video->dev, UVC_SET_CUR, + video->selector->id, video->dev->intfnum, + UVC_SU_INPUT_SELECT_CONTROL, &input, 1); } /* Try, Get, Set & Enum format */ diff --git a/linux/drivers/media/video/uvc/uvc_video.c b/linux/drivers/media/video/uvc/uvc_video.c index 07e755ba7..c833e984e 100644 --- a/linux/drivers/media/video/uvc/uvc_video.c +++ b/linux/drivers/media/video/uvc/uvc_video.c @@ -129,10 +129,10 @@ static int uvc_get_video_ctrl(struct uvc_video_device *video, return -ENOMEM; ret = __uvc_query_ctrl(video->dev, query, 0, video->streaming->intfnum, - probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, data, size, - UVC_CTRL_STREAMING_TIMEOUT); + probe ? UVC_VS_PROBE_CONTROL : UVC_VS_COMMIT_CONTROL, data, + size, UVC_CTRL_STREAMING_TIMEOUT); - if ((query == GET_MIN || query == GET_MAX) && ret == 2) { + if ((query == UVC_GET_MIN || query == UVC_GET_MAX) && ret == 2) { /* Some cameras, mostly based on Bison Electronics chipsets, * answer a GET_MIN or GET_MAX request with the wCompQuality * field only. @@ -144,7 +144,7 @@ static int uvc_get_video_ctrl(struct uvc_video_device *video, ctrl->wCompQuality = le16_to_cpup((__le16 *)data); ret = 0; goto out; - } else if (query == GET_DEF && probe == 1 && ret != size) { + } else if (query == UVC_GET_DEF && probe == 1 && ret != size) { /* Many cameras don't support the GET_DEF request on their * video probe control. Warn once and return, the caller will * fall back to GET_CUR. @@ -232,10 +232,10 @@ static int uvc_set_video_ctrl(struct uvc_video_device *video, data[33] = ctrl->bMaxVersion; } - ret = __uvc_query_ctrl(video->dev, SET_CUR, 0, + ret = __uvc_query_ctrl(video->dev, UVC_SET_CUR, 0, video->streaming->intfnum, - probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, data, size, - UVC_CTRL_STREAMING_TIMEOUT); + probe ? UVC_VS_PROBE_CONTROL : UVC_VS_COMMIT_CONTROL, data, + size, UVC_CTRL_STREAMING_TIMEOUT); if (ret != size) { uvc_printk(KERN_ERR, "Failed to set UVC %s control : " "%d (exp. %u).\n", probe ? "probe" : "commit", @@ -269,10 +269,10 @@ int uvc_probe_video(struct uvc_video_device *video, /* Get the minimum and maximum values for compression settings. */ if (!(video->dev->quirks & UVC_QUIRK_PROBE_MINMAX)) { - ret = uvc_get_video_ctrl(video, &probe_min, 1, GET_MIN); + ret = uvc_get_video_ctrl(video, &probe_min, 1, UVC_GET_MIN); if (ret < 0) goto done; - ret = uvc_get_video_ctrl(video, &probe_max, 1, GET_MAX); + ret = uvc_get_video_ctrl(video, &probe_max, 1, UVC_GET_MAX); if (ret < 0) goto done; @@ -280,8 +280,11 @@ int uvc_probe_video(struct uvc_video_device *video, } for (i = 0; i < 2; ++i) { - if ((ret = uvc_set_video_ctrl(video, probe, 1)) < 0 || - (ret = uvc_get_video_ctrl(video, probe, 1, GET_CUR)) < 0) + ret = uvc_set_video_ctrl(video, probe, 1); + if (ret < 0) + goto done; + ret = uvc_get_video_ctrl(video, probe, 1, UVC_GET_CUR); + if (ret < 0) goto done; if (video->streaming->intf->num_altsetting == 1) @@ -1069,7 +1072,7 @@ int uvc_video_init(struct uvc_video_device *video) * requests on the probe control will just keep their current streaming * parameters. */ - if (uvc_get_video_ctrl(video, probe, 1, GET_DEF) == 0) + if (uvc_get_video_ctrl(video, probe, 1, UVC_GET_DEF) == 0) uvc_set_video_ctrl(video, probe, 1); /* Initialize the streaming parameters with the probe control current @@ -1077,7 +1080,8 @@ int uvc_video_init(struct uvc_video_device *video) * control will always use values retrieved from a successful GET_CUR * request on the probe control, as required by the UVC specification. */ - if ((ret = uvc_get_video_ctrl(video, probe, 1, GET_CUR)) < 0) + ret = uvc_get_video_ctrl(video, probe, 1, UVC_GET_CUR); + if (ret < 0) return ret; /* Check if the default format descriptor exists. Use the first diff --git a/linux/drivers/media/video/uvc/uvcvideo.h b/linux/drivers/media/video/uvc/uvcvideo.h index de13c86f2..4887650c9 100644 --- a/linux/drivers/media/video/uvc/uvcvideo.h +++ b/linux/drivers/media/video/uvc/uvcvideo.h @@ -67,156 +67,13 @@ struct uvc_xu_control { #ifdef __KERNEL__ #include <linux/poll.h> +#include <linux/usb/video.h> #include "compat.h" /* -------------------------------------------------------------------------- * UVC constants */ -#define SC_UNDEFINED 0x00 -#define SC_VIDEOCONTROL 0x01 -#define SC_VIDEOSTREAMING 0x02 -#define SC_VIDEO_INTERFACE_COLLECTION 0x03 - -#define PC_PROTOCOL_UNDEFINED 0x00 - -#define CS_UNDEFINED 0x20 -#define CS_DEVICE 0x21 -#define CS_CONFIGURATION 0x22 -#define CS_STRING 0x23 -#define CS_INTERFACE 0x24 -#define CS_ENDPOINT 0x25 - -/* VideoControl class specific interface descriptor */ -#define VC_DESCRIPTOR_UNDEFINED 0x00 -#define VC_HEADER 0x01 -#define VC_INPUT_TERMINAL 0x02 -#define VC_OUTPUT_TERMINAL 0x03 -#define VC_SELECTOR_UNIT 0x04 -#define VC_PROCESSING_UNIT 0x05 -#define VC_EXTENSION_UNIT 0x06 - -/* VideoStreaming class specific interface descriptor */ -#define VS_UNDEFINED 0x00 -#define VS_INPUT_HEADER 0x01 -#define VS_OUTPUT_HEADER 0x02 -#define VS_STILL_IMAGE_FRAME 0x03 -#define VS_FORMAT_UNCOMPRESSED 0x04 -#define VS_FRAME_UNCOMPRESSED 0x05 -#define VS_FORMAT_MJPEG 0x06 -#define VS_FRAME_MJPEG 0x07 -#define VS_FORMAT_MPEG2TS 0x0a -#define VS_FORMAT_DV 0x0c -#define VS_COLORFORMAT 0x0d -#define VS_FORMAT_FRAME_BASED 0x10 -#define VS_FRAME_FRAME_BASED 0x11 -#define VS_FORMAT_STREAM_BASED 0x12 - -/* Endpoint type */ -#define EP_UNDEFINED 0x00 -#define EP_GENERAL 0x01 -#define EP_ENDPOINT 0x02 -#define EP_INTERRUPT 0x03 - -/* Request codes */ -#define RC_UNDEFINED 0x00 -#define SET_CUR 0x01 -#define GET_CUR 0x81 -#define GET_MIN 0x82 -#define GET_MAX 0x83 -#define GET_RES 0x84 -#define GET_LEN 0x85 -#define GET_INFO 0x86 -#define GET_DEF 0x87 - -/* VideoControl interface controls */ -#define VC_CONTROL_UNDEFINED 0x00 -#define VC_VIDEO_POWER_MODE_CONTROL 0x01 -#define VC_REQUEST_ERROR_CODE_CONTROL 0x02 - -/* Terminal controls */ -#define TE_CONTROL_UNDEFINED 0x00 - -/* Selector Unit controls */ -#define SU_CONTROL_UNDEFINED 0x00 -#define SU_INPUT_SELECT_CONTROL 0x01 - -/* Camera Terminal controls */ -#define CT_CONTROL_UNDEFINED 0x00 -#define CT_SCANNING_MODE_CONTROL 0x01 -#define CT_AE_MODE_CONTROL 0x02 -#define CT_AE_PRIORITY_CONTROL 0x03 -#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 -#define CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 -#define CT_FOCUS_ABSOLUTE_CONTROL 0x06 -#define CT_FOCUS_RELATIVE_CONTROL 0x07 -#define CT_FOCUS_AUTO_CONTROL 0x08 -#define CT_IRIS_ABSOLUTE_CONTROL 0x09 -#define CT_IRIS_RELATIVE_CONTROL 0x0a -#define CT_ZOOM_ABSOLUTE_CONTROL 0x0b -#define CT_ZOOM_RELATIVE_CONTROL 0x0c -#define CT_PANTILT_ABSOLUTE_CONTROL 0x0d -#define CT_PANTILT_RELATIVE_CONTROL 0x0e -#define CT_ROLL_ABSOLUTE_CONTROL 0x0f -#define CT_ROLL_RELATIVE_CONTROL 0x10 -#define CT_PRIVACY_CONTROL 0x11 - -/* Processing Unit controls */ -#define PU_CONTROL_UNDEFINED 0x00 -#define PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 -#define PU_BRIGHTNESS_CONTROL 0x02 -#define PU_CONTRAST_CONTROL 0x03 -#define PU_GAIN_CONTROL 0x04 -#define PU_POWER_LINE_FREQUENCY_CONTROL 0x05 -#define PU_HUE_CONTROL 0x06 -#define PU_SATURATION_CONTROL 0x07 -#define PU_SHARPNESS_CONTROL 0x08 -#define PU_GAMMA_CONTROL 0x09 -#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a -#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b -#define PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c -#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d -#define PU_DIGITAL_MULTIPLIER_CONTROL 0x0e -#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f -#define PU_HUE_AUTO_CONTROL 0x10 -#define PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 -#define PU_ANALOG_LOCK_STATUS_CONTROL 0x12 - -#define LXU_MOTOR_PANTILT_RELATIVE_CONTROL 0x01 -#define LXU_MOTOR_PANTILT_RESET_CONTROL 0x02 -#define LXU_MOTOR_FOCUS_MOTOR_CONTROL 0x03 - -/* VideoStreaming interface controls */ -#define VS_CONTROL_UNDEFINED 0x00 -#define VS_PROBE_CONTROL 0x01 -#define VS_COMMIT_CONTROL 0x02 -#define VS_STILL_PROBE_CONTROL 0x03 -#define VS_STILL_COMMIT_CONTROL 0x04 -#define VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 -#define VS_STREAM_ERROR_CODE_CONTROL 0x06 -#define VS_GENERATE_KEY_FRAME_CONTROL 0x07 -#define VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 -#define VS_SYNC_DELAY_CONTROL 0x09 - -#define TT_VENDOR_SPECIFIC 0x0100 -#define TT_STREAMING 0x0101 - -/* Input Terminal types */ -#define ITT_VENDOR_SPECIFIC 0x0200 -#define ITT_CAMERA 0x0201 -#define ITT_MEDIA_TRANSPORT_INPUT 0x0202 - -/* Output Terminal types */ -#define OTT_VENDOR_SPECIFIC 0x0300 -#define OTT_DISPLAY 0x0301 -#define OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 - -/* External Terminal types */ -#define EXTERNAL_VENDOR_SPECIFIC 0x0400 -#define COMPOSITE_CONNECTOR 0x0401 -#define SVIDEO_CONNECTOR 0x0402 -#define COMPONENT_CONNECTOR 0x0403 - #define UVC_TERM_INPUT 0x0000 #define UVC_TERM_OUTPUT 0x8000 @@ -228,8 +85,6 @@ struct uvc_xu_control { #define UVC_ENTITY_IS_OTERM(entity) \ (((entity)->type & 0x8000) == UVC_TERM_OUTPUT) -#define UVC_STATUS_TYPE_CONTROL 1 -#define UVC_STATUS_TYPE_STREAMING 2 /* ------------------------------------------------------------------------ * GUIDs @@ -250,19 +105,6 @@ struct uvc_xu_control { {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02} -#define UVC_GUID_LOGITECH_DEV_INFO \ - {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ - 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x1e} -#define UVC_GUID_LOGITECH_USER_HW \ - {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ - 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x1f} -#define UVC_GUID_LOGITECH_VIDEO \ - {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ - 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x50} -#define UVC_GUID_LOGITECH_MOTOR \ - {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ - 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x56} - #define UVC_GUID_FORMAT_MJPEG \ { 'M', 'J', 'P', 'G', 0x00, 0x00, 0x10, 0x00, \ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} diff --git a/linux/drivers/media/video/v4l2-common.c b/linux/drivers/media/video/v4l2-common.c index d81bae197..864ee0772 100644 --- a/linux/drivers/media/video/v4l2-common.c +++ b/linux/drivers/media/video/v4l2-common.c @@ -868,6 +868,17 @@ struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev, /* Decrease the module use count to match the first try_module_get. */ module_put(client->driver->driver.owner); + if (sd) { + /* We return errors from v4l2_subdev_call only if we have the + callback as the .s_config is not mandatory */ + int err = v4l2_subdev_call(sd, core, s_config, 0, NULL); + + if (err && err != -ENOIOCTLCMD) { + v4l2_device_unregister_subdev(sd); + sd = NULL; + } + } + error: #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26) /* If we have a client but no subdev, then something went wrong and @@ -931,6 +942,17 @@ struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct v4l2_device *v4l2_dev, /* Decrease the module use count to match the first try_module_get. */ module_put(client->driver->driver.owner); + if (sd) { + /* We return errors from v4l2_subdev_call only if we have the + callback as the .s_config is not mandatory */ + int err = v4l2_subdev_call(sd, core, s_config, 0, NULL); + + if (err && err != -ENOIOCTLCMD) { + v4l2_device_unregister_subdev(sd); + sd = NULL; + } + } + error: #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26) /* If we have a client but no subdev, then something went wrong and @@ -953,6 +975,150 @@ struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev } EXPORT_SYMBOL_GPL(v4l2_i2c_new_probed_subdev_addr); +/* Load an i2c sub-device. */ +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26) +struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, const char *module_name, + struct i2c_board_info *info, const unsigned short *probe_addrs) +{ + struct v4l2_subdev *sd = NULL; + struct i2c_client *client; + + BUG_ON(!v4l2_dev); + + if (module_name) + request_module(module_name); + + /* Create the i2c client */ + if (info->addr == 0 && probe_addrs) + client = i2c_new_probed_device(adapter, info, probe_addrs); + else + client = i2c_new_device(adapter, info); + + /* Note: by loading the module first we are certain that c->driver + will be set if the driver was found. If the module was not loaded + first, then the i2c core tries to delay-load the module for us, + and then c->driver is still NULL until the module is finally + loaded. This delay-load mechanism doesn't work if other drivers + want to use the i2c device, so explicitly loading the module + is the best alternative. */ + if (client == NULL || client->driver == NULL) + goto error; + + /* Lock the module so we can safely get the v4l2_subdev pointer */ + if (!try_module_get(client->driver->driver.owner)) + goto error; + sd = i2c_get_clientdata(client); + + /* Register with the v4l2_device which increases the module's + use count as well. */ + if (v4l2_device_register_subdev(v4l2_dev, sd)) + sd = NULL; + /* Decrease the module use count to match the first try_module_get. */ + module_put(client->driver->driver.owner); + + if (sd) { + /* We return errors from v4l2_subdev_call only if we have the + callback as the .s_config is not mandatory */ + int err = v4l2_subdev_call(sd, core, s_config, + info->irq, info->platform_data); + + if (err && err != -ENOIOCTLCMD) { + v4l2_device_unregister_subdev(sd); + sd = NULL; + } + } + +error: + /* If we have a client but no subdev, then something went wrong and + we must unregister the client. */ + if (client && sd == NULL) + i2c_unregister_device(client); + return sd; +} +EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_board); + +struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, + const char *module_name, const char *client_type, + int irq, void *platform_data, + u8 addr, const unsigned short *probe_addrs) +{ + struct i2c_board_info info; + + /* Setup the i2c board info with the device type and + the device address. */ + memset(&info, 0, sizeof(info)); + strlcpy(info.type, client_type, sizeof(info.type)); + info.addr = addr; + info.irq = irq; + info.platform_data = platform_data; + + return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, module_name, + &info, probe_addrs); +} +EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_cfg); +#else +struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, + const char *module_name, const char *client_type, + int irq, void *platform_data, + u8 addr, const unsigned short *probe_addrs) +{ + struct v4l2_subdev *sd = NULL; + struct i2c_client *client = NULL; + + BUG_ON(!v4l2_dev); + + if (module_name) + request_module(module_name); + + if (addr == 0 && probe_addrs) { + /* Legacy code: loading the module should automatically + probe and create the i2c_client on the adapter. + Try to find the client by walking the adapter's client list + for each of the possible addresses. */ + while (!client && *probe_addrs != I2C_CLIENT_END) + client = v4l2_i2c_legacy_find_client(adapter, *probe_addrs++); + } else { + /* Legacy code: loading the module automatically probes and + creates the i2c_client on the adapter. Try to find the + client by walking the adapter's client list. */ + client = v4l2_i2c_legacy_find_client(adapter, addr); + } + if (client == NULL || client->driver == NULL) + goto error; + + /* Lock the module so we can safely get the v4l2_subdev pointer */ + if (!try_module_get(client->driver->driver.owner)) + goto error; + sd = i2c_get_clientdata(client); + + /* Register with the v4l2_device which increases the module's + use count as well. */ + if (v4l2_device_register_subdev(v4l2_dev, sd)) + sd = NULL; + /* Decrease the module use count to match the first try_module_get. */ + module_put(client->driver->driver.owner); + + if (sd) { + /* We return errors from v4l2_subdev_call only if we have the + callback as the .s_config is not mandatory */ + int err = v4l2_subdev_call(sd, core, s_config, + irq, platform_data); + + if (err && err != -ENOIOCTLCMD) { + v4l2_device_unregister_subdev(sd); + sd = NULL; + } + } + +error: + return sd; +} +EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_cfg); +#endif + /* Return i2c client address of v4l2_subdev. */ unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd) { @@ -997,6 +1163,8 @@ const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type) } EXPORT_SYMBOL_GPL(v4l2_i2c_tuner_addrs); +#endif /* defined(CONFIG_I2C) */ + /* Clamp x to be between min and max, aligned to a multiple of 2^align. min * and max don't have to be aligned, but there must be at least one valid * value. E.g., min=17,max=31,align=4 is not allowed as there are no multiples @@ -1053,10 +1221,13 @@ void v4l_bound_align_image(u32 *w, unsigned int wmin, unsigned int wmax, if (walign + halign < salign) { /* Max walign where there is still a valid width */ unsigned int wmaxa = __fls(wmax ^ (wmin - 1)); + /* Max halign where there is still a valid height */ + unsigned int hmaxa = __fls(hmax ^ (hmin - 1)); /* up the smaller alignment until we have enough */ do { - if (walign <= halign && walign < wmaxa) { + if (halign >= hmaxa || + (walign <= halign && walign < wmaxa)) { *w = clamp_align(*w, wmin, wmax, walign + 1); walign = __ffs(*w); } else { @@ -1067,5 +1238,3 @@ void v4l_bound_align_image(u32 *w, unsigned int wmin, unsigned int wmax, } } EXPORT_SYMBOL_GPL(v4l_bound_align_image); - -#endif diff --git a/linux/drivers/media/video/v4l2-device.c b/linux/drivers/media/video/v4l2-device.c index 4fa93189d..655d19cd6 100644 --- a/linux/drivers/media/video/v4l2-device.c +++ b/linux/drivers/media/video/v4l2-device.c @@ -86,8 +86,8 @@ void v4l2_device_unregister(struct v4l2_device *v4l2_dev) /* Unregister subdevs */ list_for_each_entry_safe(sd, next, &v4l2_dev->subdevs, list) { v4l2_device_unregister_subdev(sd); -#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE)) -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 29) +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26) if (sd->flags & V4L2_SUBDEV_FL_IS_I2C) { struct i2c_client *client = v4l2_get_subdevdata(sd); diff --git a/linux/drivers/media/video/v4l2-ioctl.c b/linux/drivers/media/video/v4l2-ioctl.c index 22b380dfd..80c94dc5a 100644 --- a/linux/drivers/media/video/v4l2-ioctl.c +++ b/linux/drivers/media/video/v4l2-ioctl.c @@ -43,6 +43,12 @@ printk(KERN_DEBUG "%s: " fmt, vfd->name, ## arg);\ } while (0) +#define dbgarg3(fmt, arg...) \ + do { \ + if (vfd->debug & V4L2_DEBUG_IOCTL_ARG) \ + printk(KERN_CONT "%s: " fmt, vfd->name, ## arg);\ + } while (0) + /* Zero out the end of the struct pointed to by p. Everthing after, but * not including, the specified field is cleared. */ #define CLEAR_AFTER_FIELD(p, field) \ @@ -1718,24 +1724,29 @@ static long __video_do_ioctl(struct file *file, ret = ops->vidioc_enum_framesizes(file, fh, p); dbgarg(cmd, - "index=%d, pixelformat=%d, type=%d ", - p->index, p->pixel_format, p->type); + "index=%d, pixelformat=%c%c%c%c, type=%d ", + p->index, + (p->pixel_format & 0xff), + (p->pixel_format >> 8) & 0xff, + (p->pixel_format >> 16) & 0xff, + (p->pixel_format >> 24) & 0xff, + p->type); switch (p->type) { case V4L2_FRMSIZE_TYPE_DISCRETE: - dbgarg2("width = %d, height=%d\n", + dbgarg3("width = %d, height=%d\n", p->discrete.width, p->discrete.height); break; case V4L2_FRMSIZE_TYPE_STEPWISE: - dbgarg2("min %dx%d, max %dx%d, step %dx%d\n", + dbgarg3("min %dx%d, max %dx%d, step %dx%d\n", p->stepwise.min_width, p->stepwise.min_height, p->stepwise.step_width, p->stepwise.step_height, p->stepwise.max_width, p->stepwise.max_height); break; case V4L2_FRMSIZE_TYPE_CONTINUOUS: - dbgarg2("continuous\n"); + dbgarg3("continuous\n"); break; default: - dbgarg2("- Unknown type!\n"); + dbgarg3("- Unknown type!\n"); } break; diff --git a/linux/drivers/media/video/videobuf-core.c b/linux/drivers/media/video/videobuf-core.c index e9696385d..faf912403 100644 --- a/linux/drivers/media/video/videobuf-core.c +++ b/linux/drivers/media/video/videobuf-core.c @@ -119,6 +119,7 @@ void videobuf_queue_core_init(struct videobuf_queue *q, void *priv, struct videobuf_qtype_ops *int_ops) { + BUG_ON(!q); memset(q, 0, sizeof(*q)); q->irqlock = irqlock; q->dev = dev; diff --git a/linux/drivers/media/video/vivi.c b/linux/drivers/media/video/vivi.c index fe39b7326..afd8e2a5a 100644 --- a/linux/drivers/media/video/vivi.c +++ b/linux/drivers/media/video/vivi.c @@ -346,6 +346,53 @@ static struct bar_std bars[] = { #define TO_U(r, g, b) \ (((-9714 * r - 19070 * g + 28784 * b + 32768) >> 16) + 128) +/* precalculate color bar values to speed up rendering */ +static void precalculate_bars(struct vivi_fh *fh) +{ + struct vivi_dev *dev = fh->dev; + unsigned char r, g, b; + int k, is_yuv; + + fh->input = dev->input; + + for (k = 0; k < 8; k++) { + r = bars[fh->input].bar[k][0]; + g = bars[fh->input].bar[k][1]; + b = bars[fh->input].bar[k][2]; + is_yuv = 0; + + switch (fh->fmt->fourcc) { + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + is_yuv = 1; + break; + case V4L2_PIX_FMT_RGB565: + case V4L2_PIX_FMT_RGB565X: + r >>= 3; + g >>= 2; + b >>= 3; + break; + case V4L2_PIX_FMT_RGB555: + case V4L2_PIX_FMT_RGB555X: + r >>= 3; + g >>= 3; + b >>= 3; + break; + } + + if (is_yuv) { + fh->bars[k][0] = TO_Y(r, g, b); /* Luma */ + fh->bars[k][1] = TO_U(r, g, b); /* Cb */ + fh->bars[k][2] = TO_V(r, g, b); /* Cr */ + } else { + fh->bars[k][0] = r; + fh->bars[k][1] = g; + fh->bars[k][2] = b; + } + } + +} + #define TSTAMP_MIN_Y 24 #define TSTAMP_MAX_Y (TSTAMP_MIN_Y + 15) #define TSTAMP_INPUT_X 10 @@ -758,6 +805,8 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, buf->vb.height = fh->height; buf->vb.field = field; + precalculate_bars(fh); + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { rc = videobuf_iolock(vq, &buf->vb, NULL); if (rc < 0) @@ -896,53 +945,6 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return 0; } -/* precalculate color bar values to speed up rendering */ -static void precalculate_bars(struct vivi_fh *fh) -{ - struct vivi_dev *dev = fh->dev; - unsigned char r, g, b; - int k, is_yuv; - - fh->input = dev->input; - - for (k = 0; k < 8; k++) { - r = bars[fh->input].bar[k][0]; - g = bars[fh->input].bar[k][1]; - b = bars[fh->input].bar[k][2]; - is_yuv = 0; - - switch (fh->fmt->fourcc) { - case V4L2_PIX_FMT_YUYV: - case V4L2_PIX_FMT_UYVY: - is_yuv = 1; - break; - case V4L2_PIX_FMT_RGB565: - case V4L2_PIX_FMT_RGB565X: - r >>= 3; - g >>= 2; - b >>= 3; - break; - case V4L2_PIX_FMT_RGB555: - case V4L2_PIX_FMT_RGB555X: - r >>= 3; - g >>= 3; - b >>= 3; - break; - } - - if (is_yuv) { - fh->bars[k][0] = TO_Y(r, g, b); /* Luma */ - fh->bars[k][1] = TO_U(r, g, b); /* Cb */ - fh->bars[k][2] = TO_V(r, g, b); /* Cr */ - } else { - fh->bars[k][0] = r; - fh->bars[k][1] = g; - fh->bars[k][2] = b; - } - } - -} - /*FIXME: This seems to be generic enough to be at videodev2 */ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) @@ -968,8 +970,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, fh->vb_vidq.field = f->fmt.pix.field; fh->type = f->type; - precalculate_bars(fh); - ret = 0; out: mutex_unlock(&q->vb_lock); @@ -1360,6 +1360,7 @@ static int __init vivi_create_instance(int inst) goto unreg_dev; *vfd = vivi_template; + vfd->debug = debug; ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); if (ret < 0) diff --git a/linux/drivers/media/video/zoran/zoran_card.c b/linux/drivers/media/video/zoran/zoran_card.c index 67ab10878..85f63116d 100644 --- a/linux/drivers/media/video/zoran/zoran_card.c +++ b/linux/drivers/media/video/zoran/zoran_card.c @@ -1478,7 +1478,7 @@ static struct pci_driver zoran_driver = { .name = "zr36067", .id_table = zr36067_pci_tbl, .probe = zoran_probe, - .remove = zoran_remove, + .remove = __devexit_p(zoran_remove), }; static int __init zoran_init(void) diff --git a/linux/drivers/media/video/zr364xx.c b/linux/drivers/media/video/zr364xx.c index b8f47acab..7dff47834 100644 --- a/linux/drivers/media/video/zr364xx.c +++ b/linux/drivers/media/video/zr364xx.c @@ -1,5 +1,5 @@ /* - * Zoran 364xx based USB webcam module version 0.72 + * Zoran 364xx based USB webcam module version 0.73 * * Allows you to use your USB webcam with V4L2 applications * This is still in heavy developpement ! @@ -10,6 +10,8 @@ * Heavily inspired by usb-skeleton.c, vicam.c, cpia.c and spca50x.c drivers * V4L2 version inspired by meye.c driver * + * Some video buffer code by Lamarque based on s2255drv.c and vivi.c drivers. + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -35,25 +37,34 @@ #include <linux/highmem.h> #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> +#include <media/videobuf-vmalloc.h> #include "compat.h" /* Version Information */ -#define DRIVER_VERSION "v0.72" +#define DRIVER_VERSION "v0.73" +#define ZR364_VERSION_CODE KERNEL_VERSION(0, 7, 3) #define DRIVER_AUTHOR "Antoine Jacquet, http://royale.zerezo.com/" #define DRIVER_DESC "Zoran 364xx" /* Camera */ -#define FRAMES 2 +#define FRAMES 1 #define MAX_FRAME_SIZE 100000 #define BUFFER_SIZE 0x1000 #define CTRL_TIMEOUT 500 +#define ZR364XX_DEF_BUFS 4 +#define ZR364XX_READ_IDLE 0 +#define ZR364XX_READ_FRAME 1 /* Debug macro */ -#define DBG(x...) if (debug) printk(KERN_INFO KBUILD_MODNAME x) - +#define DBG(fmt, args...) \ + do { \ + if (debug) { \ + printk(KERN_INFO KBUILD_MODNAME " " fmt, ##args); \ + } \ + } while (0) /* Init methods, need to find nicer names for these * the exact names of the chipsets would be the best if someone finds it */ @@ -102,24 +113,93 @@ static struct usb_device_id device_table[] = { MODULE_DEVICE_TABLE(usb, device_table); +struct zr364xx_mode { + u32 color; /* output video color format */ + u32 brightness; /* brightness */ +}; + +/* frame structure */ +struct zr364xx_framei { + unsigned long ulState; /* ulState:ZR364XX_READ_IDLE, + ZR364XX_READ_FRAME */ + void *lpvbits; /* image data */ + unsigned long cur_size; /* current data copied to it */ +}; + +/* image buffer structure */ +struct zr364xx_bufferi { + unsigned long dwFrames; /* number of frames in buffer */ + struct zr364xx_framei frame[FRAMES]; /* array of FRAME structures */ +}; + +struct zr364xx_dmaqueue { + struct list_head active; + struct zr364xx_camera *cam; +}; + +struct zr364xx_pipeinfo { + u32 transfer_size; + u8 *transfer_buffer; + u32 state; + void *stream_urb; + void *cam; /* back pointer to zr364xx_camera struct */ + u32 err_count; + u32 idx; +}; + +struct zr364xx_fmt { + char *name; + u32 fourcc; + int depth; +}; + +/* image formats. */ +static const struct zr364xx_fmt formats[] = { + { + .name = "JPG", + .fourcc = V4L2_PIX_FMT_JPEG, + .depth = 24 + } +}; /* Camera stuff */ struct zr364xx_camera { struct usb_device *udev; /* save off the usb device pointer */ struct usb_interface *interface;/* the interface for this device */ struct video_device *vdev; /* v4l video device */ - u8 *framebuf; int nb; - unsigned char *buffer; + struct zr364xx_bufferi buffer; int skip; - int brightness; int width; int height; int method; struct mutex lock; + struct mutex open_lock; int users; + + spinlock_t slock; + struct zr364xx_dmaqueue vidq; + int resources; + int last_frame; + int cur_frame; + unsigned long frame_count; + int b_acquire; + struct zr364xx_pipeinfo pipe[1]; + + u8 read_endpoint; + + const struct zr364xx_fmt *fmt; + struct videobuf_queue vb_vidq; + enum v4l2_buf_type type; + struct zr364xx_mode mode; }; +/* buffer for one video frame */ +struct zr364xx_buffer { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + const struct zr364xx_fmt *fmt; +}; /* function used to send initialisation commands to the camera */ static int send_control_msg(struct usb_device *udev, u8 request, u16 value, @@ -273,139 +353,116 @@ static unsigned char header2[] = { }; static unsigned char header3; +/* ------------------------------------------------------------------ + Videobuf operations + ------------------------------------------------------------------*/ +static int buffer_setup(struct videobuf_queue *vq, unsigned int *count, + unsigned int *size) +{ + struct zr364xx_camera *cam = vq->priv_data; -/********************/ -/* V4L2 integration */ -/********************/ + *size = cam->width * cam->height * (cam->fmt->depth >> 3); -/* this function reads a full JPEG picture synchronously - * TODO: do it asynchronously... */ -static int read_frame(struct zr364xx_camera *cam, int framenum) -{ - int i, n, temp, head, size, actual_length; - unsigned char *ptr = NULL, *jpeg; - - redo: - /* hardware brightness */ - n = send_control_msg(cam->udev, 1, 0x2001, 0, NULL, 0); - temp = (0x60 << 8) + 127 - cam->brightness; - n = send_control_msg(cam->udev, 1, temp, 0, NULL, 0); - - /* during the first loop we are going to insert JPEG header */ - head = 0; - /* this is the place in memory where we are going to build - * the JPEG image */ - jpeg = cam->framebuf + framenum * MAX_FRAME_SIZE; - /* read data... */ - do { - n = usb_bulk_msg(cam->udev, - usb_rcvbulkpipe(cam->udev, 0x81), - cam->buffer, BUFFER_SIZE, &actual_length, - CTRL_TIMEOUT); - DBG("buffer : %d %d", cam->buffer[0], cam->buffer[1]); - DBG("bulk : n=%d size=%d", n, actual_length); - if (n < 0) { - dev_err(&cam->udev->dev, "error reading bulk msg\n"); - return 0; - } - if (actual_length < 0 || actual_length > BUFFER_SIZE) { - dev_err(&cam->udev->dev, "wrong number of bytes\n"); - return 0; - } + if (*count == 0) + *count = ZR364XX_DEF_BUFS; - /* swap bytes if camera needs it */ - if (cam->method == METHOD0) { - u16 *buf = (u16*)cam->buffer; - for (i = 0; i < BUFFER_SIZE/2; i++) - swab16s(buf + i); - } + while (*size * (*count) > ZR364XX_DEF_BUFS * 1024 * 1024) + (*count)--; - /* write the JPEG header */ - if (!head) { - DBG("jpeg header"); - ptr = jpeg; - memcpy(ptr, header1, sizeof(header1)); - ptr += sizeof(header1); - header3 = 0; - memcpy(ptr, &header3, 1); - ptr++; - memcpy(ptr, cam->buffer, 64); - ptr += 64; - header3 = 1; - memcpy(ptr, &header3, 1); - ptr++; - memcpy(ptr, cam->buffer + 64, 64); - ptr += 64; - memcpy(ptr, header2, sizeof(header2)); - ptr += sizeof(header2); - memcpy(ptr, cam->buffer + 128, - actual_length - 128); - ptr += actual_length - 128; - head = 1; - DBG("header : %d %d %d %d %d %d %d %d %d", - cam->buffer[0], cam->buffer[1], cam->buffer[2], - cam->buffer[3], cam->buffer[4], cam->buffer[5], - cam->buffer[6], cam->buffer[7], cam->buffer[8]); - } else { - memcpy(ptr, cam->buffer, actual_length); - ptr += actual_length; - } - } - /* ... until there is no more */ - while (actual_length == BUFFER_SIZE); + return 0; +} - /* we skip the 2 first frames which are usually buggy */ - if (cam->skip) { - cam->skip--; - goto redo; - } +static void free_buffer(struct videobuf_queue *vq, struct zr364xx_buffer *buf) +{ + DBG("%s\n", __func__); - /* go back to find the JPEG EOI marker */ - size = ptr - jpeg; - ptr -= 2; - while (ptr > jpeg) { - if (*ptr == 0xFF && *(ptr + 1) == 0xD9 - && *(ptr + 2) == 0xFF) - break; - ptr--; - } - if (ptr == jpeg) - DBG("No EOI marker"); + if (in_interrupt()) + BUG(); - /* Sometimes there is junk data in the middle of the picture, - * we want to skip this bogus frames */ - while (ptr > jpeg) { - if (*ptr == 0xFF && *(ptr + 1) == 0xFF - && *(ptr + 2) == 0xFF) - break; - ptr--; + videobuf_vmalloc_free(&buf->vb); + buf->vb.state = VIDEOBUF_NEEDS_INIT; +} + +static int buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct zr364xx_camera *cam = vq->priv_data; + struct zr364xx_buffer *buf = container_of(vb, struct zr364xx_buffer, + vb); + int rc; + + DBG("%s, field=%d, fmt name = %s\n", __func__, field, cam->fmt != NULL ? + cam->fmt->name : ""); + if (cam->fmt == NULL) + return -EINVAL; + + buf->vb.size = cam->width * cam->height * (cam->fmt->depth >> 3); + + if (buf->vb.baddr != 0 && buf->vb.bsize < buf->vb.size) { + DBG("invalid buffer prepare\n"); + return -EINVAL; } - if (ptr != jpeg) { - DBG("Bogus frame ? %d", cam->nb); - goto redo; + + buf->fmt = cam->fmt; + buf->vb.width = cam->width; + buf->vb.height = cam->height; + buf->vb.field = field; + + if (buf->vb.state == VIDEOBUF_NEEDS_INIT) { + rc = videobuf_iolock(vq, &buf->vb, NULL); + if (rc < 0) + goto fail; } - DBG("jpeg : %d %d %d %d %d %d %d %d", - jpeg[0], jpeg[1], jpeg[2], jpeg[3], - jpeg[4], jpeg[5], jpeg[6], jpeg[7]); + buf->vb.state = VIDEOBUF_PREPARED; + return 0; +fail: + free_buffer(vq, buf); + return rc; +} + +static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct zr364xx_buffer *buf = container_of(vb, struct zr364xx_buffer, + vb); + struct zr364xx_camera *cam = vq->priv_data; + + DBG("%s\n", __func__); - return size; + buf->vb.state = VIDEOBUF_QUEUED; + list_add_tail(&buf->vb.queue, &cam->vidq.active); } +static void buffer_release(struct videobuf_queue *vq, + struct videobuf_buffer *vb) +{ + struct zr364xx_buffer *buf = container_of(vb, struct zr364xx_buffer, + vb); + + DBG("%s\n", __func__); + free_buffer(vq, buf); +} + +static struct videobuf_queue_ops zr364xx_video_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; + +/********************/ +/* V4L2 integration */ +/********************/ +static int zr364xx_vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type type); -static ssize_t zr364xx_read(struct file *file, char __user *buf, size_t cnt, +static ssize_t zr364xx_read(struct file *file, char __user *buf, size_t count, loff_t * ppos) { - unsigned long count = cnt; - struct video_device *vdev = video_devdata(file); - struct zr364xx_camera *cam; + struct zr364xx_camera *cam = video_drvdata(file); - DBG("zr364xx_read: read %d bytes.", (int) count); - - if (vdev == NULL) - return -ENODEV; - cam = video_get_drvdata(vdev); + DBG("%s\n", __func__); if (!buf) return -EINVAL; @@ -413,21 +470,275 @@ static ssize_t zr364xx_read(struct file *file, char __user *buf, size_t cnt, if (!count) return -EINVAL; - /* NoMan Sux ! */ - count = read_frame(cam, 0); + if (cam->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && + zr364xx_vidioc_streamon(file, cam, cam->type) == 0) { + DBG("%s: reading %d bytes at pos %d.\n", __func__, (int) count, + (int) *ppos); - if (copy_to_user(buf, cam->framebuf, count)) - return -EFAULT; + /* NoMan Sux ! */ + return videobuf_read_one(&cam->vb_vidq, buf, count, ppos, + file->f_flags & O_NONBLOCK); + } - return count; + return 0; } +/* video buffer vmalloc implementation based partly on VIVI driver which is + * Copyright (c) 2006 by + * Mauro Carvalho Chehab <mchehab--a.t--infradead.org> + * Ted Walther <ted--a.t--enumera.com> + * John Sokol <sokol--a.t--videotechnology.com> + * http://v4l.videotechnology.com/ + * + */ +static void zr364xx_fillbuff(struct zr364xx_camera *cam, + struct zr364xx_buffer *buf, + int jpgsize) +{ + int pos = 0; + struct timeval ts; + const char *tmpbuf; + char *vbuf = videobuf_to_vmalloc(&buf->vb); + unsigned long last_frame; + struct zr364xx_framei *frm; + + if (!vbuf) + return; + + last_frame = cam->last_frame; + if (last_frame != -1) { + frm = &cam->buffer.frame[last_frame]; + tmpbuf = (const char *)cam->buffer.frame[last_frame].lpvbits; + switch (buf->fmt->fourcc) { + case V4L2_PIX_FMT_JPEG: + buf->vb.size = jpgsize; + memcpy(vbuf, tmpbuf, buf->vb.size); + break; + default: + printk(KERN_DEBUG KBUILD_MODNAME ": unknown format?\n"); + } + cam->last_frame = -1; + } else { + printk(KERN_ERR KBUILD_MODNAME ": =======no frame\n"); + return; + } + DBG("%s: Buffer 0x%08lx size= %d\n", __func__, + (unsigned long)vbuf, pos); + /* tell v4l buffer was filled */ + + buf->vb.field_count = cam->frame_count * 2; + do_gettimeofday(&ts); + buf->vb.ts = ts; + buf->vb.state = VIDEOBUF_DONE; +} + +static int zr364xx_got_frame(struct zr364xx_camera *cam, int jpgsize) +{ + struct zr364xx_dmaqueue *dma_q = &cam->vidq; + struct zr364xx_buffer *buf; + unsigned long flags = 0; + int rc = 0; + + DBG("wakeup: %p\n", &dma_q); + spin_lock_irqsave(&cam->slock, flags); + + if (list_empty(&dma_q->active)) { + DBG("No active queue to serve\n"); + rc = -1; + goto unlock; + } + buf = list_entry(dma_q->active.next, + struct zr364xx_buffer, vb.queue); + + if (!waitqueue_active(&buf->vb.done)) { + /* no one active */ + rc = -1; + goto unlock; + } + list_del(&buf->vb.queue); + do_gettimeofday(&buf->vb.ts); + DBG("[%p/%d] wakeup\n", buf, buf->vb.i); + zr364xx_fillbuff(cam, buf, jpgsize); + wake_up(&buf->vb.done); + DBG("wakeup [buf/i] [%p/%d]\n", buf, buf->vb.i); +unlock: + spin_unlock_irqrestore(&cam->slock, flags); + return 0; +} + +/* this function moves the usb stream read pipe data + * into the system buffers. + * returns 0 on success, EAGAIN if more data to process (call this + * function again). + */ +static int zr364xx_read_video_callback(struct zr364xx_camera *cam, + struct zr364xx_pipeinfo *pipe_info, + struct urb *purb) +{ + unsigned char *pdest; + unsigned char *psrc; + s32 idx = -1; + struct zr364xx_framei *frm; + int i = 0; + unsigned char *ptr = NULL; + + /*DBG("buffer to user\n");*/ + idx = cam->cur_frame; + frm = &cam->buffer.frame[idx]; + + /* swap bytes if camera needs it */ + if (cam->method == METHOD0) { + u16 *buf = (u16 *)pipe_info->transfer_buffer; + for (i = 0; i < purb->actual_length/2; i++) + swab16s(buf + i); + } + + /* search done. now find out if should be acquiring */ + if (!cam->b_acquire) { + /* we found a frame, but this channel is turned off */ + frm->ulState = ZR364XX_READ_IDLE; + return -EINVAL; + } + + if (frm->lpvbits == NULL) { + DBG("%s: frame buffer == NULL.%p %p %d\n", __func__, + frm, cam, idx); + return -ENOMEM; + } + + psrc = (u8 *)pipe_info->transfer_buffer; + ptr = pdest = frm->lpvbits; + + if (frm->ulState == ZR364XX_READ_IDLE) { + frm->ulState = ZR364XX_READ_FRAME; + frm->cur_size = 0; + + DBG("jpeg header, "); + memcpy(ptr, header1, sizeof(header1)); + ptr += sizeof(header1); + header3 = 0; + memcpy(ptr, &header3, 1); + ptr++; + memcpy(ptr, psrc, 64); + ptr += 64; + header3 = 1; + memcpy(ptr, &header3, 1); + ptr++; + memcpy(ptr, psrc + 64, 64); + ptr += 64; + memcpy(ptr, header2, sizeof(header2)); + ptr += sizeof(header2); + memcpy(ptr, psrc + 128, + purb->actual_length - 128); + ptr += purb->actual_length - 128; + DBG("header : %d %d %d %d %d %d %d %d %d\n", + psrc[0], psrc[1], psrc[2], + psrc[3], psrc[4], psrc[5], + psrc[6], psrc[7], psrc[8]); + frm->cur_size = ptr - pdest; + } else { + pdest += frm->cur_size; + memcpy(pdest, psrc, purb->actual_length); + frm->cur_size += purb->actual_length; + } + /*DBG("cur_size %lu urb size %d\n", frm->cur_size, + purb->actual_length);*/ + + if (purb->actual_length < pipe_info->transfer_size) { + DBG("****************Buffer[%d]full*************\n", idx); + cam->last_frame = cam->cur_frame; + cam->cur_frame++; + /* end of system frame ring buffer, start at zero */ + if (cam->cur_frame == cam->buffer.dwFrames) + cam->cur_frame = 0; + + /* frame ready */ + /* go back to find the JPEG EOI marker */ + ptr = pdest = frm->lpvbits; + ptr += frm->cur_size - 2; + while (ptr > pdest) { + if (*ptr == 0xFF && *(ptr + 1) == 0xD9 + && *(ptr + 2) == 0xFF) + break; + ptr--; + } + if (ptr == pdest) + DBG("No EOI marker\n"); + + /* Sometimes there is junk data in the middle of the picture, + * we want to skip this bogus frames */ + while (ptr > pdest) { + if (*ptr == 0xFF && *(ptr + 1) == 0xFF + && *(ptr + 2) == 0xFF) + break; + ptr--; + } + if (ptr != pdest) { + DBG("Bogus frame ? %d\n", ++(cam->nb)); + } else if (cam->b_acquire) { + /* we skip the 2 first frames which are usually buggy */ + if (cam->skip) + cam->skip--; + else { + DBG("jpeg(%lu): %d %d %d %d %d %d %d %d\n", + frm->cur_size, + pdest[0], pdest[1], pdest[2], pdest[3], + pdest[4], pdest[5], pdest[6], pdest[7]); + + zr364xx_got_frame(cam, frm->cur_size); + } + } + cam->frame_count++; + frm->ulState = ZR364XX_READ_IDLE; + frm->cur_size = 0; + } + /* done successfully */ + return 0; +} + +static int res_get(struct zr364xx_camera *cam) +{ + /* is it free? */ + mutex_lock(&cam->lock); + if (cam->resources) { + /* no, someone else uses it */ + mutex_unlock(&cam->lock); + return 0; + } + /* it's free, grab it */ + cam->resources = 1; + DBG("res: get\n"); + mutex_unlock(&cam->lock); + return 1; +} + +static inline int res_check(struct zr364xx_camera *cam) +{ + return cam->resources; +} + +static void res_free(struct zr364xx_camera *cam) +{ + mutex_lock(&cam->lock); + cam->resources = 0; + mutex_unlock(&cam->lock); + DBG("res: put\n"); +} static int zr364xx_vidioc_querycap(struct file *file, void *priv, struct v4l2_capability *cap) { - strcpy(cap->driver, DRIVER_DESC); - cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; + struct zr364xx_camera *cam = video_drvdata(file); + + strlcpy(cap->driver, DRIVER_DESC, sizeof(cap->driver)); + strlcpy(cap->card, cam->udev->product, sizeof(cap->card)); + strlcpy(cap->bus_info, dev_name(&cam->udev->dev), + sizeof(cap->bus_info)); + cap->version = ZR364_VERSION_CODE; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING; + return 0; } @@ -459,12 +770,11 @@ static int zr364xx_vidioc_s_input(struct file *file, void *priv, static int zr364xx_vidioc_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *c) { - struct video_device *vdev = video_devdata(file); struct zr364xx_camera *cam; - if (vdev == NULL) + if (file == NULL) return -ENODEV; - cam = video_get_drvdata(vdev); + cam = video_drvdata(file); switch (c->id) { case V4L2_CID_BRIGHTNESS: @@ -473,7 +783,7 @@ static int zr364xx_vidioc_queryctrl(struct file *file, void *priv, c->minimum = 0; c->maximum = 127; c->step = 1; - c->default_value = cam->brightness; + c->default_value = cam->mode.brightness; c->flags = 0; break; default: @@ -485,36 +795,42 @@ static int zr364xx_vidioc_queryctrl(struct file *file, void *priv, static int zr364xx_vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *c) { - struct video_device *vdev = video_devdata(file); struct zr364xx_camera *cam; + int temp; - if (vdev == NULL) + if (file == NULL) return -ENODEV; - cam = video_get_drvdata(vdev); + cam = video_drvdata(file); switch (c->id) { case V4L2_CID_BRIGHTNESS: - cam->brightness = c->value; + cam->mode.brightness = c->value; + /* hardware brightness */ + mutex_lock(&cam->lock); + send_control_msg(cam->udev, 1, 0x2001, 0, NULL, 0); + temp = (0x60 << 8) + 127 - cam->mode.brightness; + send_control_msg(cam->udev, 1, temp, 0, NULL, 0); + mutex_unlock(&cam->lock); break; default: return -EINVAL; } + return 0; } static int zr364xx_vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *c) { - struct video_device *vdev = video_devdata(file); struct zr364xx_camera *cam; - if (vdev == NULL) + if (file == NULL) return -ENODEV; - cam = video_get_drvdata(vdev); + cam = video_drvdata(file); switch (c->id) { case V4L2_CID_BRIGHTNESS: - c->value = cam->brightness; + c->value = cam->mode.brightness; break; default: return -EINVAL; @@ -528,26 +844,36 @@ static int zr364xx_vidioc_enum_fmt_vid_cap(struct file *file, if (f->index > 0) return -EINVAL; f->flags = V4L2_FMT_FLAG_COMPRESSED; - strcpy(f->description, "JPEG"); - f->pixelformat = V4L2_PIX_FMT_JPEG; + strcpy(f->description, formats[0].name); + f->pixelformat = formats[0].fourcc; return 0; } +static char *decode_fourcc(__u32 pixelformat, char *buf) +{ + buf[0] = pixelformat & 0xff; + buf[1] = (pixelformat >> 8) & 0xff; + buf[2] = (pixelformat >> 16) & 0xff; + buf[3] = (pixelformat >> 24) & 0xff; + buf[4] = '\0'; + return buf; +} + static int zr364xx_vidioc_try_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { - struct video_device *vdev = video_devdata(file); - struct zr364xx_camera *cam; + struct zr364xx_camera *cam = video_drvdata(file); + char pixelformat_name[5]; - if (vdev == NULL) + if (cam == NULL) return -ENODEV; - cam = video_get_drvdata(vdev); - if (f->fmt.pix.pixelformat != V4L2_PIX_FMT_JPEG) - return -EINVAL; - if (f->fmt.pix.field != V4L2_FIELD_ANY && - f->fmt.pix.field != V4L2_FIELD_NONE) + if (f->fmt.pix.pixelformat != V4L2_PIX_FMT_JPEG) { + DBG("%s: unsupported pixelformat V4L2_PIX_FMT_%s\n", __func__, + decode_fourcc(f->fmt.pix.pixelformat, pixelformat_name)); return -EINVAL; + } + f->fmt.pix.field = V4L2_FIELD_NONE; f->fmt.pix.width = cam->width; f->fmt.pix.height = cam->height; @@ -555,20 +881,22 @@ static int zr364xx_vidioc_try_fmt_vid_cap(struct file *file, void *priv, f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; f->fmt.pix.colorspace = 0; f->fmt.pix.priv = 0; + DBG("%s: V4L2_PIX_FMT_%s (%d) ok!\n", __func__, + decode_fourcc(f->fmt.pix.pixelformat, pixelformat_name), + f->fmt.pix.field); return 0; } static int zr364xx_vidioc_g_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { - struct video_device *vdev = video_devdata(file); struct zr364xx_camera *cam; - if (vdev == NULL) + if (file == NULL) return -ENODEV; - cam = video_get_drvdata(vdev); + cam = video_drvdata(file); - f->fmt.pix.pixelformat = V4L2_PIX_FMT_JPEG; + f->fmt.pix.pixelformat = formats[0].fourcc; f->fmt.pix.field = V4L2_FIELD_NONE; f->fmt.pix.width = cam->width; f->fmt.pix.height = cam->height; @@ -579,21 +907,26 @@ static int zr364xx_vidioc_g_fmt_vid_cap(struct file *file, void *priv, return 0; } +/* Lamarque TODO: implement changing resolution on the fly */ static int zr364xx_vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { - struct video_device *vdev = video_devdata(file); - struct zr364xx_camera *cam; + struct zr364xx_camera *cam = video_drvdata(file); + struct videobuf_queue *q = &cam->vb_vidq; + char pixelformat_name[5]; + int ret = zr364xx_vidioc_try_fmt_vid_cap(file, cam, f); - if (vdev == NULL) - return -ENODEV; - cam = video_get_drvdata(vdev); + if (ret < 0) + return ret; + + mutex_lock(&q->vb_lock); + + if (videobuf_queue_is_busy(&cam->vb_vidq)) { + DBG("%s queue busy\n", __func__); + ret = -EBUSY; + goto out; + } - if (f->fmt.pix.pixelformat != V4L2_PIX_FMT_JPEG) - return -EINVAL; - if (f->fmt.pix.field != V4L2_FIELD_ANY && - f->fmt.pix.field != V4L2_FIELD_NONE) - return -EINVAL; f->fmt.pix.field = V4L2_FIELD_NONE; f->fmt.pix.width = cam->width; f->fmt.pix.height = cam->height; @@ -601,19 +934,265 @@ static int zr364xx_vidioc_s_fmt_vid_cap(struct file *file, void *priv, f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; f->fmt.pix.colorspace = 0; f->fmt.pix.priv = 0; - DBG("ok!"); + cam->vb_vidq.field = f->fmt.pix.field; + cam->mode.color = V4L2_PIX_FMT_JPEG; + ret = 0; + +out: + mutex_unlock(&q->vb_lock); + + DBG("%s: V4L2_PIX_FMT_%s (%d) ok!\n", __func__, + decode_fourcc(f->fmt.pix.pixelformat, pixelformat_name), + f->fmt.pix.field); + return ret; +} + +static int zr364xx_vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + int rc; + struct zr364xx_camera *cam = video_drvdata(file); + rc = videobuf_reqbufs(&cam->vb_vidq, p); + return rc; +} + +static int zr364xx_vidioc_querybuf(struct file *file, + void *priv, + struct v4l2_buffer *p) +{ + int rc; + struct zr364xx_camera *cam = video_drvdata(file); + rc = videobuf_querybuf(&cam->vb_vidq, p); + return rc; +} + +static int zr364xx_vidioc_qbuf(struct file *file, + void *priv, + struct v4l2_buffer *p) +{ + int rc; + struct zr364xx_camera *cam = video_drvdata(file); + DBG("%s\n", __func__); + rc = videobuf_qbuf(&cam->vb_vidq, p); + return rc; +} + +static int zr364xx_vidioc_dqbuf(struct file *file, + void *priv, + struct v4l2_buffer *p) +{ + int rc; + struct zr364xx_camera *cam = video_drvdata(file); + DBG("%s\n", __func__); + rc = videobuf_dqbuf(&cam->vb_vidq, p, file->f_flags & O_NONBLOCK); + return rc; +} + +static void read_pipe_completion(struct urb *purb) +{ + struct zr364xx_pipeinfo *pipe_info; + struct zr364xx_camera *cam; + int pipe; + + pipe_info = purb->context; + /*DBG("%s %p, status %d\n", __func__, purb, purb->status);*/ + if (pipe_info == NULL) { + printk(KERN_ERR KBUILD_MODNAME ": no context!\n"); + return; + } + + cam = pipe_info->cam; + if (cam == NULL) { + printk(KERN_ERR KBUILD_MODNAME ": no context!\n"); + return; + } + + /* if shutting down, do not resubmit, exit immediately */ + if (purb->status == -ESHUTDOWN) { + DBG("%s, err shutdown\n", __func__); + pipe_info->err_count++; + return; + } + + if (pipe_info->state == 0) { + DBG("exiting USB pipe\n"); + return; + } + + if (purb->actual_length < 0 || + purb->actual_length > pipe_info->transfer_size) { + dev_err(&cam->udev->dev, "wrong number of bytes\n"); + return; + } + + if (purb->status == 0) + zr364xx_read_video_callback(cam, pipe_info, purb); + else { + pipe_info->err_count++; + DBG("%s: failed URB %d\n", __func__, purb->status); + } + + pipe = usb_rcvbulkpipe(cam->udev, cam->read_endpoint); + + /* reuse urb */ + usb_fill_bulk_urb(pipe_info->stream_urb, cam->udev, + pipe, + pipe_info->transfer_buffer, + pipe_info->transfer_size, + read_pipe_completion, pipe_info); + + if (pipe_info->state != 0) { + purb->status = usb_submit_urb(pipe_info->stream_urb, + GFP_ATOMIC); + + if (purb->status) + dev_err(&cam->udev->dev, + "error submitting urb (error=%i)\n", + purb->status); + } else + DBG("read pipe complete state 0\n"); +} + +static int zr364xx_start_readpipe(struct zr364xx_camera *cam) +{ + int pipe; + int retval; + struct zr364xx_pipeinfo *pipe_info = cam->pipe; + pipe = usb_rcvbulkpipe(cam->udev, cam->read_endpoint); + DBG("%s: start pipe IN x%x\n", __func__, cam->read_endpoint); + + pipe_info->state = 1; + pipe_info->err_count = 0; + pipe_info->stream_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!pipe_info->stream_urb) { + dev_err(&cam->udev->dev, "ReadStream: Unable to alloc URB\n"); + return -ENOMEM; + } + /* transfer buffer allocated in board_init */ + usb_fill_bulk_urb(pipe_info->stream_urb, cam->udev, + pipe, + pipe_info->transfer_buffer, + pipe_info->transfer_size, + read_pipe_completion, pipe_info); + + DBG("submitting URB %p\n", pipe_info->stream_urb); + retval = usb_submit_urb(pipe_info->stream_urb, GFP_KERNEL); + if (retval) { + printk(KERN_ERR KBUILD_MODNAME ": start read pipe failed\n"); + return retval; + } + + return 0; +} + +static void zr364xx_stop_readpipe(struct zr364xx_camera *cam) +{ + struct zr364xx_pipeinfo *pipe_info; + + if (cam == NULL) { + printk(KERN_ERR KBUILD_MODNAME ": invalid device\n"); + return; + } + DBG("stop read pipe\n"); + pipe_info = cam->pipe; + if (pipe_info) { + if (pipe_info->state != 0) + pipe_info->state = 0; + + if (pipe_info->stream_urb) { + /* cancel urb */ + usb_kill_urb(pipe_info->stream_urb); + usb_free_urb(pipe_info->stream_urb); + pipe_info->stream_urb = NULL; + } + } + DBG("stop read pipe\n"); + return; +} + +/* starts acquisition process */ +static int zr364xx_start_acquire(struct zr364xx_camera *cam) +{ + int j; + + DBG("start acquire\n"); + + cam->last_frame = -1; + cam->cur_frame = 0; + for (j = 0; j < FRAMES; j++) { + cam->buffer.frame[j].ulState = ZR364XX_READ_IDLE; + cam->buffer.frame[j].cur_size = 0; + } + return 0; +} + +static inline int zr364xx_stop_acquire(struct zr364xx_camera *cam) +{ + cam->b_acquire = 0; return 0; } static int zr364xx_vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type type) { - return 0; + struct zr364xx_camera *cam = video_drvdata(file); + int j; + int res; + + DBG("%s\n", __func__); + + if (cam->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + dev_err(&cam->udev->dev, "invalid fh type0\n"); + return -EINVAL; + } + if (cam->type != type) { + dev_err(&cam->udev->dev, "invalid fh type1\n"); + return -EINVAL; + } + + if (!res_get(cam)) { + dev_err(&cam->udev->dev, "stream busy\n"); + return -EBUSY; + } + + cam->last_frame = -1; + cam->cur_frame = 0; + cam->frame_count = 0; + for (j = 0; j < FRAMES; j++) { + cam->buffer.frame[j].ulState = ZR364XX_READ_IDLE; + cam->buffer.frame[j].cur_size = 0; + } + res = videobuf_streamon(&cam->vb_vidq); + if (res == 0) { + zr364xx_start_acquire(cam); + cam->b_acquire = 1; + } else { + res_free(cam); + } + DBG("%s: %d\n", __func__, res); + return res; } static int zr364xx_vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type type) { + int res; + struct zr364xx_camera *cam = video_drvdata(file); + + DBG("%s\n", __func__); + if (cam->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + dev_err(&cam->udev->dev, "invalid fh type0\n"); + return -EINVAL; + } + if (cam->type != type) { + dev_err(&cam->udev->dev, "invalid fh type1\n"); + return -EINVAL; + } + zr364xx_stop_acquire(cam); + res = videobuf_streamoff(&cam->vb_vidq); + if (res < 0) + return res; + res_free(cam); return 0; } @@ -622,28 +1201,19 @@ static int zr364xx_vidioc_streamoff(struct file *file, void *priv, static int zr364xx_open(struct file *file) { struct video_device *vdev = video_devdata(file); - struct zr364xx_camera *cam = video_get_drvdata(vdev); + struct zr364xx_camera *cam = video_drvdata(file); struct usb_device *udev = cam->udev; int i, err; - DBG("zr364xx_open"); + DBG("%s\n", __func__); - mutex_lock(&cam->lock); + mutex_lock(&cam->open_lock); if (cam->users) { err = -EBUSY; goto out; } - if (!cam->framebuf) { - cam->framebuf = vmalloc_32(MAX_FRAME_SIZE * FRAMES); - if (!cam->framebuf) { - dev_err(&cam->udev->dev, "vmalloc_32 failed!\n"); - err = -ENOMEM; - goto out; - } - } - for (i = 0; init[cam->method][i].size != -1; i++) { err = send_control_msg(udev, 1, init[cam->method][i].value, @@ -659,6 +1229,14 @@ static int zr364xx_open(struct file *file) cam->skip = 2; cam->users++; file->private_data = vdev; + cam->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + cam->fmt = formats; + + videobuf_queue_vmalloc_init(&cam->vb_vidq, &zr364xx_video_qops, + NULL, &cam->slock, + cam->type, + V4L2_FIELD_NONE, + sizeof(struct zr364xx_buffer), cam); /* Added some delay here, since opening/closing the camera quickly, * like Ekiga does during its startup, can crash the webcam @@ -667,28 +1245,72 @@ static int zr364xx_open(struct file *file) err = 0; out: - mutex_unlock(&cam->lock); + mutex_unlock(&cam->open_lock); + DBG("%s: %d\n", __func__, err); return err; } +static void zr364xx_destroy(struct zr364xx_camera *cam) +{ + unsigned long i; + + if (!cam) { + printk(KERN_ERR KBUILD_MODNAME ", %s: no device\n", __func__); + return; + } + mutex_lock(&cam->open_lock); + if (cam->vdev) + video_unregister_device(cam->vdev); + cam->vdev = NULL; + + /* stops the read pipe if it is running */ + if (cam->b_acquire) + zr364xx_stop_acquire(cam); + + zr364xx_stop_readpipe(cam); + + /* release sys buffers */ + for (i = 0; i < FRAMES; i++) { + if (cam->buffer.frame[i].lpvbits) { + DBG("vfree %p\n", cam->buffer.frame[i].lpvbits); + vfree(cam->buffer.frame[i].lpvbits); + } + cam->buffer.frame[i].lpvbits = NULL; + } + + /* release transfer buffer */ + kfree(cam->pipe->transfer_buffer); + cam->pipe->transfer_buffer = NULL; + + DBG("%s\n", __func__); + mutex_unlock(&cam->open_lock); + kfree(cam); + cam = NULL; +} /* release the camera */ static int zr364xx_release(struct file *file) { - struct video_device *vdev = video_devdata(file); struct zr364xx_camera *cam; struct usb_device *udev; int i, err; - DBG("zr364xx_release"); + DBG("%s\n", __func__); + cam = video_drvdata(file); - if (vdev == NULL) + if (!cam) return -ENODEV; - cam = video_get_drvdata(vdev); + mutex_lock(&cam->open_lock); udev = cam->udev; - mutex_lock(&cam->lock); + /* turn off stream */ + if (res_check(cam)) { + if (cam->b_acquire) + zr364xx_stop_acquire(cam); + videobuf_streamoff(&cam->vb_vidq); + res_free(cam); + } cam->users--; file->private_data = NULL; @@ -711,40 +1333,43 @@ static int zr364xx_release(struct file *file) err = 0; out: - mutex_unlock(&cam->lock); + mutex_unlock(&cam->open_lock); + return err; } static int zr364xx_mmap(struct file *file, struct vm_area_struct *vma) { - void *pos; - unsigned long start = vma->vm_start; - unsigned long size = vma->vm_end - vma->vm_start; - struct video_device *vdev = video_devdata(file); - struct zr364xx_camera *cam; + struct zr364xx_camera *cam = video_drvdata(file); + int ret; - DBG("zr364xx_mmap: %ld\n", size); - - if (vdev == NULL) + if (cam == NULL) { + DBG("%s: cam == NULL\n", __func__); return -ENODEV; - cam = video_get_drvdata(vdev); - - pos = cam->framebuf; - while (size > 0) { - if (vm_insert_page(vma, start, vmalloc_to_page(pos))) - return -EAGAIN; - start += PAGE_SIZE; - pos += PAGE_SIZE; - if (size > PAGE_SIZE) - size -= PAGE_SIZE; - else - size = 0; } + DBG("mmap called, vma=0x%08lx\n", (unsigned long)vma); - return 0; + ret = videobuf_mmap_mapper(&cam->vb_vidq, vma); + + DBG("vma start=0x%08lx, size=%ld, ret=%d\n", + (unsigned long)vma->vm_start, + (unsigned long)vma->vm_end - (unsigned long)vma->vm_start, ret); + return ret; } +static unsigned int zr364xx_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct zr364xx_camera *cam = video_drvdata(file); + struct videobuf_queue *q = &cam->vb_vidq; + DBG("%s\n", __func__); + + if (cam->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return POLLERR; + + return videobuf_poll_stream(file, q, wait); +} static const struct v4l2_file_operations zr364xx_fops = { .owner = THIS_MODULE, @@ -753,6 +1378,7 @@ static const struct v4l2_file_operations zr364xx_fops = { .read = zr364xx_read, .mmap = zr364xx_mmap, .ioctl = video_ioctl2, + .poll = zr364xx_poll, }; static const struct v4l2_ioctl_ops zr364xx_ioctl_ops = { @@ -769,6 +1395,10 @@ static const struct v4l2_ioctl_ops zr364xx_ioctl_ops = { .vidioc_queryctrl = zr364xx_vidioc_queryctrl, .vidioc_g_ctrl = zr364xx_vidioc_g_ctrl, .vidioc_s_ctrl = zr364xx_vidioc_s_ctrl, + .vidioc_reqbufs = zr364xx_vidioc_reqbufs, + .vidioc_querybuf = zr364xx_vidioc_querybuf, + .vidioc_qbuf = zr364xx_vidioc_qbuf, + .vidioc_dqbuf = zr364xx_vidioc_dqbuf, }; static struct video_device zr364xx_template = { @@ -784,15 +1414,76 @@ static struct video_device zr364xx_template = { /*******************/ /* USB integration */ /*******************/ +static int zr364xx_board_init(struct zr364xx_camera *cam) +{ + struct zr364xx_pipeinfo *pipe = cam->pipe; + unsigned long i; + + DBG("board init: %p\n", cam); + memset(pipe, 0, sizeof(*pipe)); + pipe->cam = cam; + pipe->transfer_size = BUFFER_SIZE; + + pipe->transfer_buffer = kzalloc(pipe->transfer_size, + GFP_KERNEL); + if (pipe->transfer_buffer == NULL) { + DBG("out of memory!\n"); + return -ENOMEM; + } + + cam->b_acquire = 0; + cam->frame_count = 0; + + /*** start create system buffers ***/ + for (i = 0; i < FRAMES; i++) { + /* always allocate maximum size for system buffers */ + cam->buffer.frame[i].lpvbits = vmalloc(MAX_FRAME_SIZE); + + DBG("valloc %p, idx %lu, pdata %p\n", + &cam->buffer.frame[i], i, + cam->buffer.frame[i].lpvbits); + if (cam->buffer.frame[i].lpvbits == NULL) { + printk(KERN_INFO KBUILD_MODNAME ": out of memory. " + "Using less frames\n"); + break; + } + } + + if (i == 0) { + printk(KERN_INFO KBUILD_MODNAME ": out of memory. Aborting\n"); + kfree(cam->pipe->transfer_buffer); + cam->pipe->transfer_buffer = NULL; + return -ENOMEM; + } else + cam->buffer.dwFrames = i; + + /* make sure internal states are set */ + for (i = 0; i < FRAMES; i++) { + cam->buffer.frame[i].ulState = ZR364XX_READ_IDLE; + cam->buffer.frame[i].cur_size = 0; + } + + cam->cur_frame = 0; + cam->last_frame = -1; + /*** end create system buffers ***/ + + /* start read pipe */ + zr364xx_start_readpipe(cam); + DBG(": board initialized\n"); + return 0; +} static int zr364xx_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(intf); struct zr364xx_camera *cam = NULL; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; int err; + int i; - DBG("probing..."); + DBG("probing...\n"); dev_info(&intf->dev, DRIVER_DESC " compatible webcam plugged\n"); dev_info(&intf->dev, "model %04x:%04x detected\n", @@ -811,22 +1502,17 @@ static int zr364xx_probe(struct usb_interface *intf, if (cam->vdev == NULL) { dev_err(&udev->dev, "cam->vdev: out of memory !\n"); kfree(cam); + cam = NULL; return -ENOMEM; } memcpy(cam->vdev, &zr364xx_template, sizeof(zr364xx_template)); + cam->vdev->parent = &intf->dev; video_set_drvdata(cam->vdev, cam); if (debug) cam->vdev->debug = V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG; cam->udev = udev; - if ((cam->buffer = kmalloc(BUFFER_SIZE, GFP_KERNEL)) == NULL) { - dev_info(&udev->dev, "cam->buffer: out of memory !\n"); - video_device_release(cam->vdev); - kfree(cam); - return -ENODEV; - } - switch (mode) { case 1: dev_info(&udev->dev, "160x120 mode selected\n"); @@ -853,21 +1539,53 @@ static int zr364xx_probe(struct usb_interface *intf, header2[439] = cam->width / 256; header2[440] = cam->width % 256; + cam->users = 0; cam->nb = 0; - cam->brightness = 64; + cam->mode.brightness = 64; mutex_init(&cam->lock); + mutex_init(&cam->open_lock); + + DBG("dev: %p, udev %p interface %p\n", cam, cam->udev, intf); + + /* set up the endpoint information */ + iface_desc = intf->cur_altsetting; + DBG("num endpoints %d\n", iface_desc->desc.bNumEndpoints); + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + if (!cam->read_endpoint && usb_endpoint_is_bulk_in(endpoint)) { + /* we found the bulk in endpoint */ + cam->read_endpoint = endpoint->bEndpointAddress; + } + } + + if (!cam->read_endpoint) { + dev_err(&intf->dev, "Could not find bulk-in endpoint\n"); + return -ENOMEM; + } + /* v4l */ + INIT_LIST_HEAD(&cam->vidq.active); + cam->vidq.cam = cam; err = video_register_device(cam->vdev, VFL_TYPE_GRABBER, -1); if (err) { dev_err(&udev->dev, "video_register_device failed\n"); video_device_release(cam->vdev); - kfree(cam->buffer); kfree(cam); + cam = NULL; return err; } usb_set_intfdata(intf, cam); + /* load zr364xx board specific */ + err = zr364xx_board_init(cam); + if (err) { + spin_lock_init(&cam->slock); + return err; + } + + spin_lock_init(&cam->slock); + dev_info(&udev->dev, DRIVER_DESC " controlling video device %d\n", cam->vdev->num); return 0; @@ -877,15 +1595,10 @@ static int zr364xx_probe(struct usb_interface *intf, static void zr364xx_disconnect(struct usb_interface *intf) { struct zr364xx_camera *cam = usb_get_intfdata(intf); + videobuf_mmap_free(&cam->vb_vidq); usb_set_intfdata(intf, NULL); dev_info(&intf->dev, DRIVER_DESC " webcam unplugged\n"); - if (cam->vdev) - video_unregister_device(cam->vdev); - cam->vdev = NULL; - kfree(cam->buffer); - if (cam->framebuf) - vfree(cam->framebuf); - kfree(cam); + zr364xx_destroy(cam); } |