diff options
Diffstat (limited to 'linux/drivers')
164 files changed, 7876 insertions, 3444 deletions
diff --git a/linux/drivers/media/Kconfig b/linux/drivers/media/Kconfig index 223c36ede..ba69beeb0 100644 --- a/linux/drivers/media/Kconfig +++ b/linux/drivers/media/Kconfig @@ -2,8 +2,14 @@ # Multimedia device configuration # -menu "Multimedia devices" +menuconfig MEDIA_SUPPORT + tristate "Multimedia support" depends on HAS_IOMEM + help + If you want to use Video for Linux, DVB for Linux, or DAB adapters, + enable this option and other options below. + +if MEDIA_SUPPORT comment "Multimedia core support" @@ -136,4 +142,4 @@ config USB_DABUSB module will be called dabusb. endif # DAB -endmenu +endif # MEDIA_SUPPORT diff --git a/linux/drivers/media/common/ir-keymaps.c b/linux/drivers/media/common/ir-keymaps.c index d5fd71968..56fa64b4c 100644 --- a/linux/drivers/media/common/ir-keymaps.c +++ b/linux/drivers/media/common/ir-keymaps.c @@ -2800,3 +2800,26 @@ IR_KEYTAB_TYPE ir_codes_dm1105_nec[IR_KEYTAB_SIZE] = { [0x1b] = KEY_B, /*recall*/ }; EXPORT_SYMBOL_GPL(ir_codes_dm1105_nec); + +/* EVGA inDtube + Devin Heitmueller <devin.heitmueller@gmail.com> + */ +IR_KEYTAB_TYPE ir_codes_evga_indtube[IR_KEYTAB_SIZE] = { + [0x12] = KEY_POWER, + [0x02] = KEY_MODE, /* TV */ + [0x14] = KEY_MUTE, + [0x1a] = KEY_CHANNELUP, + [0x16] = KEY_TV2, /* PIP */ + [0x1d] = KEY_VOLUMEUP, + [0x05] = KEY_CHANNELDOWN, + [0x0f] = KEY_PLAYPAUSE, + [0x19] = KEY_VOLUMEDOWN, + [0x1c] = KEY_REWIND, + [0x0d] = KEY_RECORD, + [0x18] = KEY_FORWARD, + [0x1e] = KEY_PREVIOUS, + [0x1b] = KEY_STOP, + [0x1f] = KEY_NEXT, + [0x13] = KEY_CAMERA, +}; +EXPORT_SYMBOL_GPL(ir_codes_evga_indtube); diff --git a/linux/drivers/media/common/tuners/tuner-simple.c b/linux/drivers/media/common/tuners/tuner-simple.c index 233476df9..2ac1c8edb 100644 --- a/linux/drivers/media/common/tuners/tuner-simple.c +++ b/linux/drivers/media/common/tuners/tuner-simple.c @@ -423,6 +423,24 @@ static int simple_std_setup(struct dvb_frontend *fe, return 0; } +static int simple_set_aux_byte(struct dvb_frontend *fe, u8 config, u8 aux) +{ + struct tuner_simple_priv *priv = fe->tuner_priv; + int rc; + u8 buffer[2]; + + buffer[0] = (config & ~0x38) | 0x18; + buffer[1] = aux; + + tuner_dbg("setting aux byte: 0x%02x 0x%02x\n", buffer[0], buffer[1]); + + rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 2); + if (2 != rc) + tuner_warn("i2c i/o error: rc == %d (should be 2)\n", rc); + + return rc == 2 ? 0 : rc; +} + static int simple_post_tune(struct dvb_frontend *fe, u8 *buffer, u16 div, u8 config, u8 cb) { @@ -431,30 +449,10 @@ static int simple_post_tune(struct dvb_frontend *fe, u8 *buffer, switch (priv->type) { case TUNER_LG_TDVS_H06XF: - /* Set the Auxiliary Byte. */ -#if 0 - buffer[2] &= ~0x20; - buffer[2] |= 0x18; - buffer[3] = 0x20; - tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n", - buffer[0], buffer[1], buffer[2], buffer[3]); - - rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4); - if (4 != rc) - tuner_warn("i2c i/o error: rc == %d " - "(should be 4)\n", rc); -#else - buffer[0] = buffer[2]; - buffer[0] &= ~0x20; - buffer[0] |= 0x18; - buffer[1] = 0x20; - tuner_dbg("tv 0x%02x 0x%02x\n", buffer[0], buffer[1]); - - rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 2); - if (2 != rc) - tuner_warn("i2c i/o error: rc == %d " - "(should be 2)\n", rc); -#endif + simple_set_aux_byte(fe, config, 0x20); + break; + case TUNER_PHILIPS_FQ1216LME_MK3: + simple_set_aux_byte(fe, config, 0x60); /* External AGC */ break; case TUNER_MICROTUNE_4042FI5: { @@ -526,6 +524,11 @@ static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer) case TUNER_THOMSON_DTT761X: buffer[3] = 0x39; break; + case TUNER_PHILIPS_FQ1216LME_MK3: + tuner_err("This tuner doesn't have FM\n"); + /* Set the low band for sanity, since it covers 88-108 MHz */ + buffer[3] = 0x01; + break; case TUNER_MICROTUNE_4049FM5: default: buffer[3] = 0xa4; @@ -698,12 +701,12 @@ static int simple_set_radio_freq(struct dvb_frontend *fe, return 0; } - /* Bandswitch byte */ - simple_radio_bandswitch(fe, &buffer[0]); - buffer[2] = (t_params->ranges[0].config & ~TUNER_RATIO_MASK) | TUNER_RATIO_SELECT_50; /* 50 kHz step */ + /* Bandswitch byte */ + simple_radio_bandswitch(fe, &buffer[0]); + /* Convert from 1/16 kHz V4L steps to 1/20 MHz (=50 kHz) PLL steps freq * (1 Mhz / 16000 V4L steps) * (20 PLL steps / 1 MHz) = freq * (1/800) */ diff --git a/linux/drivers/media/common/tuners/tuner-types.c b/linux/drivers/media/common/tuners/tuner-types.c index 43afd30b0..e57d7cb2f 100644 --- a/linux/drivers/media/common/tuners/tuner-types.c +++ b/linux/drivers/media/common/tuners/tuner-types.c @@ -1280,6 +1280,28 @@ static struct tuner_params tuner_tcl_mf02gip_5n_params[] = { }, }; +/* 80-89 */ +/* --------- TUNER_PHILIPS_FQ1216LME_MK3 -- active loopthrough, no FM ------- */ + +static struct tuner_params tuner_fq1216lme_mk3_params[] = { + { + .type = TUNER_PARAM_TYPE_PAL, + .ranges = tuner_fm1216me_mk3_pal_ranges, + .count = ARRAY_SIZE(tuner_fm1216me_mk3_pal_ranges), + .cb_first_if_lower_freq = 1, /* not specified, but safe to do */ + .has_tda9887 = 1, /* TDA9886 */ + .port1_active = 1, + .port2_active = 1, + .port2_invert_for_secam_lc = 1, + .default_top_low = 4, + .default_top_mid = 4, + .default_top_high = 4, + .default_top_secam_low = 4, + .default_top_secam_mid = 4, + .default_top_secam_high = 4, + }, +}; + /* --------------------------------------------------------------------- */ struct tunertype tuners[] = { @@ -1725,6 +1747,13 @@ struct tunertype tuners[] = { .params = tuner_fm1216mk5_params, .count = ARRAY_SIZE(tuner_fm1216mk5_params), }, + + /* 80-89 */ + [TUNER_PHILIPS_FQ1216LME_MK3] = { /* PAL/SECAM, Loop-thru, no FM */ + .name = "Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough", + .params = tuner_fq1216lme_mk3_params, + .count = ARRAY_SIZE(tuner_fq1216lme_mk3_params), + }, }; EXPORT_SYMBOL(tuners); diff --git a/linux/drivers/media/common/tuners/tuner-xc2028.c b/linux/drivers/media/common/tuners/tuner-xc2028.c index 3f03dfa2c..a7466867c 100644 --- a/linux/drivers/media/common/tuners/tuner-xc2028.c +++ b/linux/drivers/media/common/tuners/tuner-xc2028.c @@ -34,7 +34,7 @@ MODULE_PARM_DESC(debug, "enable verbose debug messages"); static int no_poweroff; module_param(no_poweroff, int, 0644); -MODULE_PARM_DESC(debug, "0 (default) powers device off when not used.\n" +MODULE_PARM_DESC(no_poweroff, "0 (default) powers device off when not used.\n" "1 keep device energized and with tuner ready all the times.\n" " Faster, but consumes more power and keeps the device hotter\n"); @@ -921,22 +921,29 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */, * that xc2028 will be in a safe state. * Maybe this might also be needed for DTV. */ - if (new_mode == T_ANALOG_TV) { + if (new_mode == T_ANALOG_TV) rc = send_seq(priv, {0x00, 0x00}); - } else if (priv->cur_fw.type & ATSC) { - offset = 1750000; - } else { - offset = 2750000; + + /* + * Digital modes require an offset to adjust to the + * proper frequency. + * Analog modes require offset = 0 + */ + if (new_mode == T_DIGITAL_TV) { + /* Sets the offset according with firmware */ + if (priv->cur_fw.type & DTV6) + offset = 1750000; + else if (priv->cur_fw.type & DTV7) + offset = 2250000; + else /* DTV8 or DTV78 */ + offset = 2750000; + /* - * We must adjust the offset by 500kHz in two cases in order - * to correctly center the IF output: - * 1) When the ZARLINK456 or DIBCOM52 tables were explicitly - * selected and a 7MHz channel is tuned; - * 2) When tuning a VHF channel with DTV78 firmware. + * We must adjust the offset by 500kHz when + * tuning a 7MHz VHF channel with DTV78 firmware + * (used in Australia, Italy and Germany) */ - if (((priv->cur_fw.type & DTV7) && - (priv->cur_fw.scode_table & (ZARLINK456 | DIBCOM52))) || - ((priv->cur_fw.type & DTV78) && freq < 470000000)) + if ((priv->cur_fw.type & DTV78) && freq < 470000000) offset -= 500000; } @@ -995,7 +1002,7 @@ static int xc2028_set_analog_freq(struct dvb_frontend *fe, if (priv->ctrl.input1) type |= INPUT1; return generic_set_freq(fe, (625l * p->frequency) / 10, - T_ANALOG_TV, type, 0, 0); + T_RADIO, type, 0, 0); } /* if std is not defined, choose one */ @@ -1026,21 +1033,20 @@ static int xc2028_set_params(struct dvb_frontend *fe, switch(fe->ops.info.type) { case FE_OFDM: bw = p->u.ofdm.bandwidth; - break; - case FE_QAM: - tuner_info("WARN: There are some reports that " - "QAM 6 MHz doesn't work.\n" - "If this works for you, please report by " - "e-mail to: v4l-dvb-maintainer@linuxtv.org\n"); - bw = BANDWIDTH_6_MHZ; - type |= QAM; + /* + * The only countries with 6MHz seem to be Taiwan/Uruguay. + * Both seem to require QAM firmware for OFDM decoding + * Tested in Taiwan by Terry Wu <terrywu2009@gmail.com> + */ + if (bw == BANDWIDTH_6_MHZ) + type |= QAM; break; case FE_ATSC: bw = BANDWIDTH_6_MHZ; /* The only ATSC firmware (at least on v2.7) is D2633 */ type |= ATSC | D2633; break; - /* DVB-S is not supported */ + /* DVB-S and pure QAM (FE_QAM) are not supported */ default: return -EINVAL; } diff --git a/linux/drivers/media/common/tuners/xc5000.c b/linux/drivers/media/common/tuners/xc5000.c index e38433ec6..6626d19b3 100644 --- a/linux/drivers/media/common/tuners/xc5000.c +++ b/linux/drivers/media/common/tuners/xc5000.c @@ -3,6 +3,7 @@ * * Copyright (c) 2007 Xceive Corporation * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org> + * Copyright (c) 2009 Devin Heitmueller <dheitmueller@kernellabs.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -36,14 +37,20 @@ static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); +static int no_poweroff; +module_param(no_poweroff, int, 0644); +MODULE_PARM_DESC(no_poweroff, "0 (default) powers device off when not used.\n" + "\t\t1 keep device energized and with tuner ready all the times.\n" + "\t\tFaster, but consumes more power and keeps the device hotter"); + static DEFINE_MUTEX(xc5000_list_mutex); static LIST_HEAD(hybrid_tuner_instance_list); #define dprintk(level, fmt, arg...) if (debug >= level) \ printk(KERN_INFO "%s: " fmt, "xc5000", ## arg) -#define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.1.fw" -#define XC5000_DEFAULT_FIRMWARE_SIZE 12332 +#define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.6.114.fw" +#define XC5000_DEFAULT_FIRMWARE_SIZE 12401 struct xc5000_priv { struct tuner_i2c_props i2c_props; @@ -83,11 +90,11 @@ struct xc5000_priv { #define XREG_D_CODE 0x04 #define XREG_IF_OUT 0x05 #define XREG_SEEK_MODE 0x07 -#define XREG_POWER_DOWN 0x0A +#define XREG_POWER_DOWN 0x0A /* Obsolete */ #define XREG_SIGNALSOURCE 0x0D /* 0=Air, 1=Cable */ #define XREG_SMOOTHEDCVBS 0x0E #define XREG_XTALFREQ 0x0F -#define XREG_FINERFFREQ 0x10 +#define XREG_FINERFREQ 0x10 #define XREG_DDIMODE 0x11 #define XREG_ADC_ENV 0x00 @@ -100,6 +107,7 @@ struct xc5000_priv { #define XREG_VERSION 0x07 #define XREG_PRODUCT_ID 0x08 #define XREG_BUSY 0x09 +#define XREG_BUILD 0x0D /* Basic firmware description. This will remain with @@ -191,27 +199,36 @@ static struct XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { {"FM Radio-INPUT1", 0x0208, 0x9002} }; -static int xc5000_is_firmware_loaded(struct dvb_frontend *fe); -static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len); -static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len); -static void xc5000_TunerReset(struct dvb_frontend *fe); +static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe); +static int xc5000_is_firmware_loaded(struct dvb_frontend *fe); +static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val); +static int xc5000_TunerReset(struct dvb_frontend *fe); static int xc_send_i2c_data(struct xc5000_priv *priv, u8 *buf, int len) { - return xc5000_writeregs(priv, buf, len) - ? XC_RESULT_I2C_WRITE_FAILURE : XC_RESULT_SUCCESS; + struct i2c_msg msg = { .addr = priv->i2c_props.addr, + .flags = 0, .buf = buf, .len = len }; + + if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) { + printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n", len); + return XC_RESULT_I2C_WRITE_FAILURE; + } + return XC_RESULT_SUCCESS; } +/* This routine is never used because the only time we read data from the + i2c bus is when we read registers, and we want that to be an atomic i2c + transaction in case we are on a multi-master bus */ static int xc_read_i2c_data(struct xc5000_priv *priv, u8 *buf, int len) { - return xc5000_readregs(priv, buf, len) - ? XC_RESULT_I2C_READ_FAILURE : XC_RESULT_SUCCESS; -} + struct i2c_msg msg = { .addr = priv->i2c_props.addr, + .flags = I2C_M_RD, .buf = buf, .len = len }; -static int xc_reset(struct dvb_frontend *fe) -{ - xc5000_TunerReset(fe); - return XC_RESULT_SUCCESS; + if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) { + printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n", len); + return -EREMOTEIO; + } + return 0; } static void xc_wait(int wait_ms) @@ -219,7 +236,7 @@ static void xc_wait(int wait_ms) msleep(wait_ms); } -static void xc5000_TunerReset(struct dvb_frontend *fe) +static int xc5000_TunerReset(struct dvb_frontend *fe) { struct xc5000_priv *priv = fe->tuner_priv; int ret; @@ -232,16 +249,21 @@ static void xc5000_TunerReset(struct dvb_frontend *fe) priv->i2c_props.adap->algo_data, DVB_FRONTEND_COMPONENT_TUNER, XC5000_TUNER_RESET, 0); - if (ret) + if (ret) { printk(KERN_ERR "xc5000: reset failed\n"); - } else + return XC_RESULT_RESET_FAILURE; + } + } else { printk(KERN_ERR "xc5000: no tuner reset callback function, fatal\n"); + return XC_RESULT_RESET_FAILURE; + } + return XC_RESULT_SUCCESS; } static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData) { u8 buf[4]; - int WatchDogTimer = 5; + int WatchDogTimer = 100; int result; buf[0] = (regAddr >> 8) & 0xFF; @@ -263,7 +285,7 @@ static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData) /* busy flag cleared */ break; } else { - xc_wait(100); /* wait 5 ms */ + xc_wait(5); /* wait 5 ms */ WatchDogTimer--; } } @@ -276,25 +298,6 @@ static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData) return result; } -static int xc_read_reg(struct xc5000_priv *priv, u16 regAddr, u16 *i2cData) -{ - u8 buf[2]; - int result; - - buf[0] = (regAddr >> 8) & 0xFF; - buf[1] = regAddr & 0xFF; - result = xc_send_i2c_data(priv, buf, 2); - if (result != XC_RESULT_SUCCESS) - return result; - - result = xc_read_i2c_data(priv, buf, 2); - if (result != XC_RESULT_SUCCESS) - return result; - - *i2cData = buf[0] * 256 + buf[1]; - return result; -} - static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence) { struct xc5000_priv *priv = fe->tuner_priv; @@ -309,7 +312,7 @@ static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence) len = i2c_sequence[index] * 256 + i2c_sequence[index+1]; if (len == 0x0000) { /* RESET command */ - result = xc_reset(fe); + result = xc5000_TunerReset(fe); index += 2; if (result != XC_RESULT_SUCCESS) return result; @@ -371,15 +374,6 @@ static int xc_SetTVStandard(struct xc5000_priv *priv, return ret; } -static int xc_shutdown(struct xc5000_priv *priv) -{ - return XC_RESULT_SUCCESS; - /* Fixme: cannot bring tuner back alive once shutdown - * without reloading the driver modules. - * return xc_write_reg(priv, XREG_POWER_DOWN, 0); - */ -} - static int xc_SetSignalSource(struct xc5000_priv *priv, u16 rf_mode) { dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode, @@ -408,22 +402,14 @@ static int xc_set_RF_frequency(struct xc5000_priv *priv, u32 freq_hz) freq_code = (u16)(freq_hz / 15625); - return xc_write_reg(priv, XREG_RF_FREQ, freq_code); + /* Starting in firmware version 1.1.44, Xceive recommends using the + FINERFREQ for all normal tuning (the doc indicates reg 0x03 should + only be used for fast scanning for channel lock) */ + return xc_write_reg(priv, XREG_FINERFREQ, freq_code); } #if 0 /* We'll probably need these for analog support */ -static int xc_FineTune_RF_frequency(struct xc5000_priv *priv, u32 freq_hz) -{ - u16 freq_code = (u16)(freq_hz / 15625); - - if ((freq_hz > xc5000_tuner_ops.info.frequency_max) || - (freq_hz < xc5000_tuner_ops.info.frequency_min)) - return XC_RESULT_OUT_OF_RANGE; - - return xc_write_reg(priv, XREG_FINERFFREQ, freq_code); -} - static int xc_set_Xtal_frequency(struct xc5000_priv *priv, u32 xtalFreqInKHz) { u16 xtalRatio = (32000 * 0x8000)/xtalFreqInKHz; @@ -443,7 +429,7 @@ static int xc_set_IF_frequency(struct xc5000_priv *priv, u32 freq_khz) static int xc_get_ADC_Envelope(struct xc5000_priv *priv, u16 *adc_envelope) { - return xc_read_reg(priv, XREG_ADC_ENV, adc_envelope); + return xc5000_readreg(priv, XREG_ADC_ENV, adc_envelope); } static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz) @@ -452,8 +438,8 @@ static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz) u16 regData; u32 tmp; - result = xc_read_reg(priv, XREG_FREQ_ERROR, ®Data); - if (result) + result = xc5000_readreg(priv, XREG_FREQ_ERROR, ®Data); + if (result != XC_RESULT_SUCCESS) return result; tmp = (u32)regData; @@ -463,7 +449,7 @@ static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz) static int xc_get_lock_status(struct xc5000_priv *priv, u16 *lock_status) { - return xc_read_reg(priv, XREG_LOCK, lock_status); + return xc5000_readreg(priv, XREG_LOCK, lock_status); } static int xc_get_version(struct xc5000_priv *priv, @@ -473,8 +459,8 @@ static int xc_get_version(struct xc5000_priv *priv, u16 data; int result; - result = xc_read_reg(priv, XREG_VERSION, &data); - if (result) + result = xc5000_readreg(priv, XREG_VERSION, &data); + if (result != XC_RESULT_SUCCESS) return result; (*hw_majorversion) = (data >> 12) & 0x0F; @@ -485,13 +471,18 @@ static int xc_get_version(struct xc5000_priv *priv, return 0; } +static int xc_get_buildversion(struct xc5000_priv *priv, u16 *buildrev) +{ + return xc5000_readreg(priv, XREG_BUILD, buildrev); +} + static int xc_get_hsync_freq(struct xc5000_priv *priv, u32 *hsync_freq_hz) { u16 regData; int result; - result = xc_read_reg(priv, XREG_HSYNC_FREQ, ®Data); - if (result) + result = xc5000_readreg(priv, XREG_HSYNC_FREQ, ®Data); + if (result != XC_RESULT_SUCCESS) return result; (*hsync_freq_hz) = ((regData & 0x0fff) * 763)/100; @@ -500,12 +491,12 @@ static int xc_get_hsync_freq(struct xc5000_priv *priv, u32 *hsync_freq_hz) static int xc_get_frame_lines(struct xc5000_priv *priv, u16 *frame_lines) { - return xc_read_reg(priv, XREG_FRAME_LINES, frame_lines); + return xc5000_readreg(priv, XREG_FRAME_LINES, frame_lines); } static int xc_get_quality(struct xc5000_priv *priv, u16 *quality) { - return xc_read_reg(priv, XREG_QUALITY, quality); + return xc5000_readreg(priv, XREG_QUALITY, quality); } static u16 WaitForLock(struct xc5000_priv *priv) @@ -523,7 +514,9 @@ static u16 WaitForLock(struct xc5000_priv *priv) return lockState; } -static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz) +#define XC_TUNE_ANALOG 0 +#define XC_TUNE_DIGITAL 1 +static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz, int mode) { int found = 0; @@ -532,8 +525,10 @@ static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz) if (xc_set_RF_frequency(priv, freq_hz) != XC_RESULT_SUCCESS) return 0; - if (WaitForLock(priv) == 1) - found = 1; + if (mode == XC_TUNE_ANALOG) { + if (WaitForLock(priv) == 1) + found = 1; + } return found; } @@ -555,32 +550,7 @@ static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val) } *val = (bval[0] << 8) | bval[1]; - return 0; -} - -static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len) -{ - struct i2c_msg msg = { .addr = priv->i2c_props.addr, - .flags = 0, .buf = buf, .len = len }; - - if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) { - printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n", - (int)len); - return -EREMOTEIO; - } - return 0; -} - -static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len) -{ - struct i2c_msg msg = { .addr = priv->i2c_props.addr, - .flags = I2C_M_RD, .buf = buf, .len = len }; - - if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) { - printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n", (int)len); - return -EREMOTEIO; - } - return 0; + return XC_RESULT_SUCCESS; } static int xc5000_fwupload(struct dvb_frontend *fe) @@ -600,7 +570,7 @@ static int xc5000_fwupload(struct dvb_frontend *fe) ret = XC_RESULT_RESET_FAILURE; goto out; } else { - printk(KERN_INFO "xc5000: firmware read %Zu bytes.\n", + printk(KERN_DEBUG "xc5000: firmware read %Zu bytes.\n", fw->size); ret = XC_RESULT_SUCCESS; } @@ -609,8 +579,9 @@ static int xc5000_fwupload(struct dvb_frontend *fe) printk(KERN_ERR "xc5000: firmware incorrect size\n"); ret = XC_RESULT_RESET_FAILURE; } else { - printk(KERN_INFO "xc5000: firmware upload\n"); + printk(KERN_INFO "xc5000: firmware uploading...\n"); ret = xc_load_i2c_sequence(fe, fw->data); + printk(KERN_INFO "xc5000: firmware upload complete...\n"); } out: @@ -628,6 +599,7 @@ static void xc_debug_dump(struct xc5000_priv *priv) u16 quality; u8 hw_majorversion = 0, hw_minorversion = 0; u8 fw_majorversion = 0, fw_minorversion = 0; + u16 fw_buildversion = 0; /* Wait for stats to stabilize. * Frame Lines needs two frame times after initial lock @@ -647,9 +619,10 @@ static void xc_debug_dump(struct xc5000_priv *priv) xc_get_version(priv, &hw_majorversion, &hw_minorversion, &fw_majorversion, &fw_minorversion); - dprintk(1, "*** HW: V%02x.%02x, FW: V%02x.%02x\n", + xc_get_buildversion(priv, &fw_buildversion); + dprintk(1, "*** HW: V%02x.%02x, FW: V%02x.%02x.%04x\n", hw_majorversion, hw_minorversion, - fw_majorversion, fw_minorversion); + fw_majorversion, fw_minorversion, fw_buildversion); xc_get_hsync_freq(priv, &hsync_freq_hz); dprintk(1, "*** Horizontal sync frequency = %d Hz\n", hsync_freq_hz); @@ -667,27 +640,57 @@ static int xc5000_set_params(struct dvb_frontend *fe, struct xc5000_priv *priv = fe->tuner_priv; int ret; + if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) + xc_load_fw_and_init_tuner(fe); + dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency); - switch (params->u.vsb.modulation) { - case VSB_8: - case VSB_16: - dprintk(1, "%s() VSB modulation\n", __func__); + if (fe->ops.info.type == FE_ATSC) { + dprintk(1, "%s() ATSC\n", __func__); + switch (params->u.vsb.modulation) { + case VSB_8: + case VSB_16: + dprintk(1, "%s() VSB modulation\n", __func__); + priv->rf_mode = XC_RF_MODE_AIR; + priv->freq_hz = params->frequency - 1750000; + priv->bandwidth = BANDWIDTH_6_MHZ; + priv->video_standard = DTV6; + break; + case QAM_64: + case QAM_256: + case QAM_AUTO: + dprintk(1, "%s() QAM modulation\n", __func__); + priv->rf_mode = XC_RF_MODE_CABLE; + priv->freq_hz = params->frequency - 1750000; + priv->bandwidth = BANDWIDTH_6_MHZ; + priv->video_standard = DTV6; + break; + default: + return -EINVAL; + } + } else if (fe->ops.info.type == FE_OFDM) { + dprintk(1, "%s() OFDM\n", __func__); + switch (params->u.ofdm.bandwidth) { + case BANDWIDTH_6_MHZ: + priv->bandwidth = BANDWIDTH_6_MHZ; + priv->video_standard = DTV6; + priv->freq_hz = params->frequency - 1750000; + break; + case BANDWIDTH_7_MHZ: + printk(KERN_ERR "xc5000 bandwidth 7MHz not supported\n"); + return -EINVAL; + case BANDWIDTH_8_MHZ: + priv->bandwidth = BANDWIDTH_8_MHZ; + priv->video_standard = DTV8; + priv->freq_hz = params->frequency - 2750000; + break; + default: + printk(KERN_ERR "xc5000 bandwidth not set!\n"); + return -EINVAL; + } priv->rf_mode = XC_RF_MODE_AIR; - priv->freq_hz = params->frequency - 1750000; - priv->bandwidth = BANDWIDTH_6_MHZ; - priv->video_standard = DTV6; - break; - case QAM_64: - case QAM_256: - case QAM_AUTO: - dprintk(1, "%s() QAM modulation\n", __func__); - priv->rf_mode = XC_RF_MODE_CABLE; - priv->freq_hz = params->frequency - 1750000; - priv->bandwidth = BANDWIDTH_6_MHZ; - priv->video_standard = DTV6; - break; - default: + } else { + printk(KERN_ERR "xc5000 modulation type not supported!\n"); return -EINVAL; } @@ -717,7 +720,7 @@ static int xc5000_set_params(struct dvb_frontend *fe, return -EIO; } - xc_tune_channel(priv, priv->freq_hz); + xc_tune_channel(priv, priv->freq_hz, XC_TUNE_DIGITAL); if (debug) xc_debug_dump(priv); @@ -744,8 +747,6 @@ static int xc5000_is_firmware_loaded(struct dvb_frontend *fe) return ret; } -static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe); - static int xc5000_set_analog_params(struct dvb_frontend *fe, struct analog_parameters *params) { @@ -826,7 +827,7 @@ tune_channel: return -EREMOTEIO; } - xc_tune_channel(priv, priv->freq_hz); + xc_tune_channel(priv, priv->freq_hz, XC_TUNE_ANALOG); if (debug) xc_debug_dump(priv); @@ -894,18 +895,18 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) static int xc5000_sleep(struct dvb_frontend *fe) { - struct xc5000_priv *priv = fe->tuner_priv; int ret; dprintk(1, "%s()\n", __func__); - /* On Pinnacle PCTV HD 800i, the tuner cannot be reinitialized - * once shutdown without reloading the driver. Maybe I am not - * doing something right. - * - */ + /* Avoid firmware reload on slow devices */ + if (no_poweroff) + return 0; - ret = xc_shutdown(priv); + /* According to Xceive technical support, the "powerdown" register + was removed in newer versions of the firmware. The "supported" + way to sleep the tuner is to pull the reset pin low for 10ms */ + ret = xc5000_TunerReset(fe); if (ret != XC_RESULT_SUCCESS) { printk(KERN_ERR "xc5000: %s() unable to shutdown tuner\n", @@ -1010,7 +1011,7 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, /* Check if firmware has been loaded. It is possible that another instance of the driver has loaded the firmware. */ - if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0) + if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != XC_RESULT_SUCCESS) goto fail; switch (id) { diff --git a/linux/drivers/media/dvb/b2c2/flexcop-common.h b/linux/drivers/media/dvb/b2c2/flexcop-common.h index cee2956cb..9d66105d3 100644 --- a/linux/drivers/media/dvb/b2c2/flexcop-common.h +++ b/linux/drivers/media/dvb/b2c2/flexcop-common.h @@ -1,9 +1,7 @@ /* - * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III - * - * flexcop-common.h - common header file for device-specific source files also. - * - * see flexcop.c for copyright information. + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-common.h - common header file for device-specific source files + * see flexcop.c for copyright information */ #ifndef __FLEXCOP_COMMON_H__ #define __FLEXCOP_COMMON_H__ diff --git a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index f7afab594..efb4a6c2b 100644 --- a/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/linux/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -1,34 +1,27 @@ /* - * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III - * - * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC. - * - * see flexcop.c for copyright information. + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-fe-tuner.c - methods for frontend attachment and DiSEqC controlling + * see flexcop.c for copyright information */ #include <media/tuner.h> - #include "flexcop.h" - -#include "stv0299.h" -#include "mt352.h" -#include "nxt200x.h" -#include "bcm3510.h" -#include "stv0297.h" #include "mt312.h" -#include "lgdt330x.h" -#include "dvb-pll.h" -#include "tuner-simple.h" - +#include "stv0299.h" #include "s5h1420.h" #include "itd1000.h" - -#include "cx24123.h" #include "cx24113.h" - +#include "cx24123.h" #include "isl6421.h" +#include "mt352.h" +#include "bcm3510.h" +#include "nxt200x.h" +#include "dvb-pll.h" +#include "lgdt330x.h" +#include "tuner-simple.h" +#include "stv0297.h" /* lnb control */ - +#if defined(CONFIG_DVB_MT312_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { struct flexcop_device *fc = fe->dvb->priv; @@ -37,65 +30,62 @@ static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage v = fc->read_ibi_reg(fc, misc_204); switch (voltage) { - case SEC_VOLTAGE_OFF: - v.misc_204.ACPI1_sig = 1; - break; - case SEC_VOLTAGE_13: - v.misc_204.ACPI1_sig = 0; - v.misc_204.LNB_L_H_sig = 0; - break; - case SEC_VOLTAGE_18: - v.misc_204.ACPI1_sig = 0; - v.misc_204.LNB_L_H_sig = 1; - break; - default: - err("unknown SEC_VOLTAGE value"); - return -EINVAL; + case SEC_VOLTAGE_OFF: + v.misc_204.ACPI1_sig = 1; + break; + case SEC_VOLTAGE_13: + v.misc_204.ACPI1_sig = 0; + v.misc_204.LNB_L_H_sig = 0; + break; + case SEC_VOLTAGE_18: + v.misc_204.ACPI1_sig = 0; + v.misc_204.LNB_L_H_sig = 1; + break; + default: + err("unknown SEC_VOLTAGE value"); + return -EINVAL; } return fc->write_ibi_reg(fc, misc_204, v); } +#endif +#if defined(CONFIG_DVB_S5H1420_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) \ + || defined(CONFIG_DVB_MT312_MODULE) static int flexcop_sleep(struct dvb_frontend* fe) { struct flexcop_device *fc = fe->dvb->priv; -/* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */ - if (fc->fe_sleep) return fc->fe_sleep(fe); - -/* v.misc_204.ACPI3_sig = 1; - fc->write_ibi_reg(fc,misc_204,v);*/ - return 0; } +#endif +/* SkyStar2 DVB-S rev 2.3 */ +#if defined(CONFIG_DVB_MT312_MODULE) static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) { - /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ +/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ struct flexcop_device *fc = fe->dvb->priv; flexcop_ibi_value v; u16 ax; v.raw = 0; - deb_tuner("tone = %u\n",tone); switch (tone) { - case SEC_TONE_ON: - ax = 0x01ff; - break; - case SEC_TONE_OFF: - ax = 0; - break; - default: - err("unknown SEC_TONE value"); - return -EINVAL; + case SEC_TONE_ON: + ax = 0x01ff; + break; + case SEC_TONE_OFF: + ax = 0; + break; + default: + err("unknown SEC_TONE value"); + return -EINVAL; } v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */ - v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax; v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax; - return fc->write_ibi_reg(fc,lnb_switch_freq_200,v); } @@ -110,17 +100,16 @@ static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data) static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data) { int i, par = 1, d; - for (i = 7; i >= 0; i--) { d = (data >> i) & 1; par ^= d; flexcop_diseqc_send_bit(fe, d); } - flexcop_diseqc_send_bit(fe, par); } -static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst) +static int flexcop_send_diseqc_msg(struct dvb_frontend *fe, + int len, u8 *msg, unsigned long burst) { int i; @@ -129,7 +118,6 @@ static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, un for (i = 0; i < len; i++) flexcop_diseqc_send_byte(fe,msg[i]); - mdelay(16); if (burst != -1) { @@ -146,50 +134,110 @@ static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, un return 0; } -static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) +static int flexcop_diseqc_send_master_cmd(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *cmd) { return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0); } -static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) +static int flexcop_diseqc_send_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t minicmd) { return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd); } -/* dvb-s stv0299 */ -static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio) +static struct mt312_config skystar23_samsung_tbdu18132_config = { + .demod_address = 0x0e, +}; + +static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + u8 buf[4]; + u32 div; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, + .len = sizeof(buf) }; + struct flexcop_device *fc = fe->dvb->priv; + div = (params->frequency + (125/2)) / 125; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = (div >> 0) & 0xff; + buf[2] = 0x84 | ((div >> 10) & 0x60); + buf[3] = 0x80; + + if (params->frequency < 1550000) + buf[3] |= 0x02; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static int skystar2_rev23_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + fc->fe = dvb_attach(mt312_attach, &skystar23_samsung_tbdu18132_config, i2c); + if (fc->fe != NULL) { + struct dvb_frontend_ops *ops = &fc->fe->ops; + ops->tuner_ops.set_params = + skystar23_samsung_tbdu18132_tuner_set_params; + ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; + ops->diseqc_send_burst = flexcop_diseqc_send_burst; + ops->set_tone = flexcop_set_tone; + ops->set_voltage = flexcop_set_voltage; + fc->fe_sleep = ops->sleep; + ops->sleep = flexcop_sleep; + return 1; + } + return 0; +} +#endif + +/* SkyStar2 DVB-S rev 2.6 */ +#if defined(CONFIG_DVB_STV0299_MODULE) +static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe, + u32 srate, u32 ratio) { u8 aclk = 0; u8 bclk = 0; - if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; } - else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; } - else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; } - else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; } - else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; } - else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; } - - stv0299_writereg (fe, 0x13, aclk); - stv0299_writereg (fe, 0x14, bclk); - stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff); - stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff); - stv0299_writereg (fe, 0x21, (ratio ) & 0xf0); + if (srate < 1500000) { + aclk = 0xb7; bclk = 0x47; + } else if (srate < 3000000) { + aclk = 0xb7; bclk = 0x4b; + } else if (srate < 7000000) { + aclk = 0xb7; bclk = 0x4f; + } else if (srate < 14000000) { + aclk = 0xb7; bclk = 0x53; + } else if (srate < 30000000) { + aclk = 0xb6; bclk = 0x53; + } else if (srate < 45000000) { + aclk = 0xb4; bclk = 0x51; + } + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, ratio & 0xf0); return 0; } -static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params) +static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) { u8 buf[4]; u32 div; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; + struct i2c_msg msg = { + .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; struct flexcop_device *fc = fe->dvb->priv; - div = params->frequency / 125; buf[0] = (div >> 8) & 0x7f; buf[1] = div & 0xff; - buf[2] = 0x84; /* 0xC4 */ + buf[2] = 0x84; /* 0xC4 */ buf[3] = 0x08; if (params->frequency < 1500000) @@ -203,48 +251,48 @@ static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend* fe, struct dv } static u8 samsung_tbmu24112_inittab[] = { - 0x01, 0x15, - 0x02, 0x30, - 0x03, 0x00, - 0x04, 0x7D, - 0x05, 0x35, - 0x06, 0x02, - 0x07, 0x00, - 0x08, 0xC3, - 0x0C, 0x00, - 0x0D, 0x81, - 0x0E, 0x23, - 0x0F, 0x12, - 0x10, 0x7E, - 0x11, 0x84, - 0x12, 0xB9, - 0x13, 0x88, - 0x14, 0x89, - 0x15, 0xC9, - 0x16, 0x00, - 0x17, 0x5C, - 0x18, 0x00, - 0x19, 0x00, - 0x1A, 0x00, - 0x1C, 0x00, - 0x1D, 0x00, - 0x1E, 0x00, - 0x1F, 0x3A, - 0x20, 0x2E, - 0x21, 0x80, - 0x22, 0xFF, - 0x23, 0xC1, - 0x28, 0x00, - 0x29, 0x1E, - 0x2A, 0x14, - 0x2B, 0x0F, - 0x2C, 0x09, - 0x2D, 0x05, - 0x31, 0x1F, - 0x32, 0x19, - 0x33, 0xFE, - 0x34, 0x93, - 0xff, 0xff, + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7D, + 0x05, 0x35, + 0x06, 0x02, + 0x07, 0x00, + 0x08, 0xC3, + 0x0C, 0x00, + 0x0D, 0x81, + 0x0E, 0x23, + 0x0F, 0x12, + 0x10, 0x7E, + 0x11, 0x84, + 0x12, 0xB9, + 0x13, 0x88, + 0x14, 0x89, + 0x15, 0xC9, + 0x16, 0x00, + 0x17, 0x5C, + 0x18, 0x00, + 0x19, 0x00, + 0x1A, 0x00, + 0x1C, 0x00, + 0x1D, 0x00, + 0x1E, 0x00, + 0x1F, 0x3A, + 0x20, 0x2E, + 0x21, 0x80, + 0x22, 0xFF, + 0x23, 0xC1, + 0x28, 0x00, + 0x29, 0x1E, + 0x2A, 0x14, + 0x2B, 0x0F, + 0x2C, 0x09, + 0x2D, 0x05, + 0x31, 0x1F, + 0x32, 0x19, + 0x33, 0xFE, + 0x34, 0x93, + 0xff, 0xff, }; static struct stv0299_config samsung_tbmu24112_config = { @@ -259,27 +307,155 @@ static struct stv0299_config samsung_tbmu24112_config = { .set_symbol_rate = samsung_tbmu24112_set_symbol_rate, }; -/* dvb-t mt352 */ -static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe) +static int skystar2_rev26_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c); + if (fc->fe != NULL) { + struct dvb_frontend_ops *ops = &fc->fe->ops; + ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params; + ops->set_voltage = flexcop_set_voltage; + fc->fe_sleep = ops->sleep; + ops->sleep = flexcop_sleep; + return 1; + } + return 0; +} +#endif + +/* SkyStar2 DVB-S rev 2.7 */ +#if defined(CONFIG_DVB_S5H1420_MODULE) +static struct s5h1420_config skystar2_rev2_7_s5h1420_config = { + .demod_address = 0x53, + .invert = 1, + .repeated_start_workaround = 1, + .serial_mpeg = 1, +}; + +static struct itd1000_config skystar2_rev2_7_itd1000_config = { + .i2c_address = 0x61, +}; + +static int skystar2_rev27_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + flexcop_ibi_value r108; + struct i2c_adapter *i2c_tuner; + + /* enable no_base_addr - no repeated start when reading */ + fc->fc_i2c_adap[0].no_base_addr = 1; + fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config, + i2c); + if (!fc->fe) + goto fail; + + i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe); + if (!i2c_tuner) + goto fail; + + fc->fe_sleep = fc->fe->ops.sleep; + fc->fe->ops.sleep = flexcop_sleep; + + /* enable no_base_addr - no repeated start when reading */ + fc->fc_i2c_adap[2].no_base_addr = 1; + if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, + 0x08, 1, 1)) { + err("ISL6421 could NOT be attached"); + goto fail_isl; + } + info("ISL6421 successfully attached"); + + /* the ITD1000 requires a lower i2c clock - is it a problem ? */ + r108.raw = 0x00000506; + fc->write_ibi_reg(fc, tw_sm_c_108, r108); + if (!dvb_attach(itd1000_attach, fc->fe, i2c_tuner, + &skystar2_rev2_7_itd1000_config)) { + err("ITD1000 could NOT be attached"); + /* Should i2c clock be restored? */ + goto fail_isl; + } + info("ITD1000 successfully attached"); + + return 1; + +fail_isl: + fc->fc_i2c_adap[2].no_base_addr = 0; +fail: + /* for the next devices we need it again */ + fc->fc_i2c_adap[0].no_base_addr = 0; + return 0; +} +#endif + +/* SkyStar2 rev 2.8 */ +#if defined(CONFIG_DVB_CX24123_MODULE) +static struct cx24123_config skystar2_rev2_8_cx24123_config = { + .demod_address = 0x55, + .dont_use_pll = 1, + .agc_callback = cx24113_agc_callback, +}; + +static const struct cx24113_config skystar2_rev2_8_cx24113_config = { + .i2c_addr = 0x54, + .xtal_khz = 10111, +}; + +static int skystar2_rev28_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + struct i2c_adapter *i2c_tuner; + + fc->fe = dvb_attach(cx24123_attach, &skystar2_rev2_8_cx24123_config, + i2c); + if (!fc->fe) + return 0; + + i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe);; + if (!i2c_tuner) + return 0; + + if (!dvb_attach(cx24113_attach, fc->fe, &skystar2_rev2_8_cx24113_config, + i2c_tuner)) { + err("CX24113 could NOT be attached"); + return 0; + } + info("CX24113 successfully attached"); + + fc->fc_i2c_adap[2].no_base_addr = 1; + if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, + 0x08, 0, 0)) { + err("ISL6421 could NOT be attached"); + fc->fc_i2c_adap[2].no_base_addr = 0; + return 0; + } + info("ISL6421 successfully attached"); + /* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an + * IR-receiver (PIC16F818) - but the card has no input for that ??? */ + return 1; +} +#endif + +/* AirStar DVB-T */ +#if defined(CONFIG_DVB_MT352_MODULE) +static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe) { - static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d }; - static u8 mt352_reset [] = { 0x50, 0x80 }; - static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 }; - static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 }; + static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d }; + static u8 mt352_reset[] = { 0x50, 0x80 }; + static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 }; + static u8 mt352_agc_cfg[] = { 0x67, 0x28, 0xa1 }; static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); udelay(2000); mt352_write(fe, mt352_reset, sizeof(mt352_reset)); mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); - mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); - return 0; } -static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend* fe, struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len) +static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len) { u32 div; unsigned char bs = 0; @@ -287,19 +463,20 @@ static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend* fe, struct dvb_fro if (buf_len < 5) return -EINVAL; - #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ +#define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6; - - if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09; - if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a; - if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08; + if (params->frequency >= 48000000 && params->frequency <= 154000000) \ + bs = 0x09; + if (params->frequency >= 161000000 && params->frequency <= 439000000) \ + bs = 0x0a; + if (params->frequency >= 447000000 && params->frequency <= 863000000) \ + bs = 0x08; pllbuf[0] = 0x61; pllbuf[1] = div >> 8; pllbuf[2] = div & 0xff; pllbuf[3] = 0xcc; pllbuf[4] = bs; - return 5; } @@ -308,70 +485,95 @@ static struct mt352_config samsung_tdtc9251dh0_config = { .demod_init = samsung_tdtc9251dh0_demod_init, }; -static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) +static int airstar_dvbt_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c); + if (fc->fe != NULL) { + fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs; + return 1; + } + return 0; +} +#endif + +/* AirStar ATSC 1st generation */ +#if defined(CONFIG_DVB_BCM3510_MODULE) +static int flexcop_fe_request_firmware(struct dvb_frontend *fe, + const struct firmware **fw, char* name) { struct flexcop_device *fc = fe->dvb->priv; return request_firmware(fw, name, fc->dev); } -static struct lgdt330x_config air2pc_atsc_hd5000_config = { - .demod_address = 0x59, - .demod_chip = LGDT3303, - .serial_mpeg = 0x04, - .clock_polarity_flip = 1, -}; - -static struct nxt200x_config samsung_tbmv_config = { - .demod_address = 0x0a, -}; - static struct bcm3510_config air2pc_atsc_first_gen_config = { .demod_address = 0x0f, .request_firmware = flexcop_fe_request_firmware, }; -static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params) +static int airstar_atsc1_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) { - u8 buf[4]; - u32 div; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; - struct flexcop_device *fc = fe->dvb->priv; - - div = (params->frequency + (125/2)) / 125; + fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c); + return fc->fe != NULL; +} +#endif - buf[0] = (div >> 8) & 0x7f; - buf[1] = (div >> 0) & 0xff; - buf[2] = 0x84 | ((div >> 10) & 0x60); - buf[3] = 0x80; +/* AirStar ATSC 2nd generation */ +#if defined(CONFIG_DVB_NXT200X_MODULE) +static struct nxt200x_config samsung_tbmv_config = { + .demod_address = 0x0a, +}; - if (params->frequency < 1550000) - buf[3] |= 0x02; +static int airstar_atsc2_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c); + if (!fc->fe) + return 0; - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1) - return -EIO; - return 0; + return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, + DVB_PLL_SAMSUNG_TBMV); } +#endif -static struct mt312_config skystar23_samsung_tbdu18132_config = { - - .demod_address = 0x0e, +/* AirStar ATSC 3rd generation */ +#if defined(CONFIG_DVB_LGDT330X_MODULE) +static struct lgdt330x_config air2pc_atsc_hd5000_config = { + .demod_address = 0x59, + .demod_chip = LGDT3303, + .serial_mpeg = 0x04, + .clock_polarity_flip = 1, }; +static int airstar_atsc3_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c); + if (!fc->fe) + return 0; + + return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61, + TUNER_LG_TDVS_H06XF); +} +#endif + +/* CableStar2 DVB-C */ +#if defined(CONFIG_DVB_STV0297_MODULE) static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe, - struct dvb_frontend_parameters *fep) + struct dvb_frontend_parameters *fep) { struct flexcop_device *fc = fe->dvb->priv; u8 buf[4]; u16 div; int ret; -/* 62.5 kHz * 10 */ +/* 62.5 kHz * 10 */ #define REF_FREQ 625 #define FREQ_OFFSET 36125 - div = ((fep->frequency/1000 + FREQ_OFFSET ) * 10) / REF_FREQ; // 4 MHz = 4000 KHz + div = ((fep->frequency/1000 + FREQ_OFFSET) * 10) / REF_FREQ; +/* 4 MHz = 4000 KHz */ buf[0] = (u8)( div >> 8) & 0x7f; buf[1] = (u8) div & 0xff; @@ -384,11 +586,11 @@ static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe, * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95 */ buf[2] = 0x95; -// Range(MHz) C1 * RE RTS BS4 BS3 BS2 BS1 Byte 5 -// 47 - 153 0 * 0 0 0 0 0 1 0x01 -// 153 - 430 0 * 0 0 0 0 1 0 0x02 -// 430 - 822 0 * 0 0 1 0 0 0 0x08 -// 822 - 862 1 * 0 0 1 0 0 0 0x88 +/* Range(MHz) C1 * RE RTS BS4 BS3 BS2 BS1 Byte 5 + * 47 - 153 0 * 0 0 0 0 0 1 0x01 + * 153 - 430 0 * 0 0 0 0 1 0 0x02 + * 430 - 822 0 * 0 0 1 0 0 0 0x08 + * 822 - 862 1 * 0 0 1 0 0 0 0x88 */ if (fep->frequency <= 153000000) buf[3] = 0x01; else if (fep->frequency <= 430000000) buf[3] = 0x02; @@ -397,11 +599,11 @@ static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe, if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); - deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n",fep->frequency, buf[0],buf[1],buf[2],buf[3]); + deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n", fep->frequency, + buf[0], buf[1], buf[2], buf[3]); ret = fc->i2c_request(&fc->fc_i2c_adap[2], - FC_WRITE, 0x61, buf[0], &buf[1], 3); + FC_WRITE, 0x61, buf[0], &buf[1], 3); deb_tuner("tuner write returned: %d\n",ret); - return ret; } @@ -481,182 +683,73 @@ static u8 alps_tdee4_stv0297_inittab[] = { static struct stv0297_config alps_tdee4_stv0297_config = { .demod_address = 0x1c, .inittab = alps_tdee4_stv0297_inittab, -// .invert = 1, -// .pll_set = alps_tdee4_stv0297_pll_set, -}; - - -/* SkyStar2 rev2.7 (a/u) */ -static struct s5h1420_config skystar2_rev2_7_s5h1420_config = { - .demod_address = 0x53, - .invert = 1, - .repeated_start_workaround = 1, - .serial_mpeg = 1, -}; - -static struct itd1000_config skystar2_rev2_7_itd1000_config = { - .i2c_address = 0x61, }; -/* SkyStar2 rev2.8 */ -static struct cx24123_config skystar2_rev2_8_cx24123_config = { - .demod_address = 0x55, - .dont_use_pll = 1, - .agc_callback = cx24113_agc_callback, -}; - -static const struct cx24113_config skystar2_rev2_8_cx24113_config = { - .i2c_addr = 0x54, - .xtal_khz = 10111, -}; - -/* try to figure out the frontend, each card/box can have on of the following list */ -int flexcop_frontend_init(struct flexcop_device *fc) +static int cablestar2_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) { - struct dvb_frontend_ops *ops; - struct i2c_adapter *i2c = &fc->fc_i2c_adap[0].i2c_adap; - struct i2c_adapter *i2c_tuner; - - /* enable no_base_addr - no repeated start when reading */ - fc->fc_i2c_adap[0].no_base_addr = 1; - fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config, i2c); - if (fc->fe != NULL) { - flexcop_ibi_value r108; - i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe); - ops = &fc->fe->ops; - - fc->fe_sleep = ops->sleep; - ops->sleep = flexcop_sleep; - - fc->dev_type = FC_SKY_REV27; - - /* enable no_base_addr - no repeated start when reading */ - fc->fc_i2c_adap[2].no_base_addr = 1; - if (dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, 0x08, 1, 1) == NULL) - err("ISL6421 could NOT be attached"); - else - info("ISL6421 successfully attached"); - - /* the ITD1000 requires a lower i2c clock - it slows down the stuff for everyone - but is it a problem ? */ - r108.raw = 0x00000506; - fc->write_ibi_reg(fc, tw_sm_c_108, r108); - if (i2c_tuner) { - if (dvb_attach(itd1000_attach, fc->fe, i2c_tuner, &skystar2_rev2_7_itd1000_config) == NULL) - err("ITD1000 could NOT be attached"); - else - info("ITD1000 successfully attached"); - } - goto fe_found; - } - fc->fc_i2c_adap[0].no_base_addr = 0; /* for the next devices we need it again */ - - /* try the sky v2.8 (cx24123, isl6421) */ - fc->fe = dvb_attach(cx24123_attach, - &skystar2_rev2_8_cx24123_config, i2c); - if (fc->fe != NULL) { - i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe); - if (i2c_tuner != NULL) { - if (dvb_attach(cx24113_attach, fc->fe, - &skystar2_rev2_8_cx24113_config, - i2c_tuner) == NULL) - err("CX24113 could NOT be attached"); - else - info("CX24113 successfully attached"); - } - - fc->dev_type = FC_SKY_REV28; - - fc->fc_i2c_adap[2].no_base_addr = 1; - if (dvb_attach(isl6421_attach, fc->fe, - &fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0) == NULL) - err("ISL6421 could NOT be attached"); - else - info("ISL6421 successfully attached"); - - /* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an - * IR-receiver (PIC16F818) - but the card has no input for - * that ??? */ - - goto fe_found; - } - - /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */ - fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c); - if (fc->fe != NULL) { - ops = &fc->fe->ops; - - ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params; - - ops->set_voltage = flexcop_set_voltage; - - fc->fe_sleep = ops->sleep; - ops->sleep = flexcop_sleep; - - fc->dev_type = FC_SKY_REV26; - goto fe_found; - } - - /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */ - fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c); - if (fc->fe != NULL) { - fc->dev_type = FC_AIR_DVBT; - fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs; - goto fe_found; - } - - /* try the air atsc 2nd generation (nxt2002) */ - fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c); - if (fc->fe != NULL) { - fc->dev_type = FC_AIR_ATSC2; - dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, DVB_PLL_SAMSUNG_TBMV); - goto fe_found; - } - - fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c); - if (fc->fe != NULL) { - fc->dev_type = FC_AIR_ATSC3; - dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61, - TUNER_LG_TDVS_H06XF); - goto fe_found; - } - - /* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */ - fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c); - if (fc->fe != NULL) { - fc->dev_type = FC_AIR_ATSC1; - goto fe_found; - } - - /* try the cable dvb (stv0297) */ fc->fc_i2c_adap[0].no_base_addr = 1; fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c); - if (fc->fe != NULL) { - fc->dev_type = FC_CABLE; - fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params; - goto fe_found; + if (!fc->fe) { + /* Reset for next frontend to try */ + fc->fc_i2c_adap[0].no_base_addr = 0; + return 0; } - fc->fc_i2c_adap[0].no_base_addr = 0; - - /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */ - fc->fe = dvb_attach(mt312_attach, - &skystar23_samsung_tbdu18132_config, i2c); - if (fc->fe != NULL) { - ops = &fc->fe->ops; - - ops->tuner_ops.set_params = skystar23_samsung_tbdu18132_tuner_set_params; - - ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; - ops->diseqc_send_burst = flexcop_diseqc_send_burst; - ops->set_tone = flexcop_set_tone; - ops->set_voltage = flexcop_set_voltage; - - fc->fe_sleep = ops->sleep; - ops->sleep = flexcop_sleep; + fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params; + return 1; +} +#endif + +static struct { + flexcop_device_type_t type; + int (*attach)(struct flexcop_device *, struct i2c_adapter *); +} flexcop_frontends[] = { +#if defined(CONFIG_DVB_S5H1420_MODULE) + { FC_SKY_REV27, skystar2_rev27_attach }, +#endif +#if defined(CONFIG_DVB_CX24123_MODULE) + { FC_SKY_REV28, skystar2_rev28_attach }, +#endif +#if defined(CONFIG_DVB_STV0299_MODULE) + { FC_SKY_REV26, skystar2_rev26_attach }, +#endif +#if defined(CONFIG_DVB_MT352_MODULE) + { FC_AIR_DVBT, airstar_dvbt_attach }, +#endif +#if defined(CONFIG_DVB_NXT200X_MODULE) + { FC_AIR_ATSC2, airstar_atsc2_attach }, +#endif +#if defined(CONFIG_DVB_LGDT330X_MODULE) + { FC_AIR_ATSC3, airstar_atsc3_attach }, +#endif +#if defined(CONFIG_DVB_BCM3510_MODULE) + { FC_AIR_ATSC1, airstar_atsc1_attach }, +#endif +#if defined(CONFIG_DVB_STV0297_MODULE) + { FC_CABLE, cablestar2_attach }, +#endif +#if defined(CONFIG_DVB_MT312_MODULE) + { FC_SKY_REV23, skystar2_rev23_attach }, +#endif +}; - fc->dev_type = FC_SKY_REV23; - goto fe_found; +/* try to figure out the frontend */ +int flexcop_frontend_init(struct flexcop_device *fc) +{ + int i; + for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) { + /* type needs to be set before, because of some workarounds + * done based on the probed card type */ + fc->dev_type = flexcop_frontends[i].type; + if (flexcop_frontends[i].attach(fc, &fc->fc_i2c_adap[0].i2c_adap)) + goto fe_found; + /* Clean up partially attached frontend */ + if (fc->fe) { + dvb_frontend_detach(fc->fe); + fc->fe = NULL; + } } - + fc->dev_type = FC_UNK; err("no frontend driver found for this B2C2/FlexCop adapter"); return -ENODEV; @@ -664,9 +757,7 @@ fe_found: info("found '%s' .", fc->fe->ops.info.name); if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) { err("frontend registration failed!"); - ops = &fc->fe->ops; - if (ops->release != NULL) - ops->release(fc->fe); + dvb_frontend_detach(fc->fe); fc->fe = NULL; return -EINVAL; } @@ -680,6 +771,5 @@ void flexcop_frontend_exit(struct flexcop_device *fc) dvb_unregister_frontend(fc->fe); dvb_frontend_detach(fc->fe); } - fc->init_state &= ~FC_STATE_FE_INIT; } diff --git a/linux/drivers/media/dvb/b2c2/flexcop-i2c.c b/linux/drivers/media/dvb/b2c2/flexcop-i2c.c index 06a90f67e..df4d6e8d9 100644 --- a/linux/drivers/media/dvb/b2c2/flexcop-i2c.c +++ b/linux/drivers/media/dvb/b2c2/flexcop-i2c.c @@ -200,7 +200,7 @@ static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, msgs[i].buf[0], &msgs[i].buf[1], msgs[i].len - 1); if (ret < 0) { - err("i2c master_xfer failed"); + deb_i2c("i2c master_xfer failed"); break; } } diff --git a/linux/drivers/media/dvb/b2c2/flexcop-misc.c b/linux/drivers/media/dvb/b2c2/flexcop-misc.c index e56627d2f..f06f3a907 100644 --- a/linux/drivers/media/dvb/b2c2/flexcop-misc.c +++ b/linux/drivers/media/dvb/b2c2/flexcop-misc.c @@ -46,16 +46,16 @@ static const char *flexcop_revision_names[] = { }; static const char *flexcop_device_names[] = { - "Unknown device", - "Air2PC/AirStar 2 DVB-T", - "Air2PC/AirStar 2 ATSC 1st generation", - "Air2PC/AirStar 2 ATSC 2nd generation", - "Sky2PC/SkyStar 2 DVB-S", - "Sky2PC/SkyStar 2 DVB-S (old version)", - "Cable2PC/CableStar 2 DVB-C", - "Air2PC/AirStar 2 ATSC 3rd generation (HD5000)", - "Sky2PC/SkyStar 2 DVB-S rev 2.7a/u", - "Sky2PC/SkyStar 2 DVB-S rev 2.8", + [FC_UNK] = "Unknown device", + [FC_CABLE] = "Cable2PC/CableStar 2 DVB-C", + [FC_AIR_DVBT] = "Air2PC/AirStar 2 DVB-T", + [FC_AIR_ATSC1] = "Air2PC/AirStar 2 ATSC 1st generation", + [FC_AIR_ATSC2] = "Air2PC/AirStar 2 ATSC 2nd generation", + [FC_AIR_ATSC3] = "Air2PC/AirStar 2 ATSC 3rd generation (HD5000)", + [FC_SKY_REV23] = "Sky2PC/SkyStar 2 DVB-S rev 2.3 (old version)", + [FC_SKY_REV26] = "Sky2PC/SkyStar 2 DVB-S rev 2.6", + [FC_SKY_REV27] = "Sky2PC/SkyStar 2 DVB-S rev 2.7a/u", + [FC_SKY_REV28] = "Sky2PC/SkyStar 2 DVB-S rev 2.8", }; static const char *flexcop_bus_names[] = { diff --git a/linux/drivers/media/dvb/bt8xx/bt878.c b/linux/drivers/media/dvb/bt8xx/bt878.c index 57f0f84b6..456cd8756 100644 --- a/linux/drivers/media/dvb/bt8xx/bt878.c +++ b/linux/drivers/media/dvb/bt8xx/bt878.c @@ -512,12 +512,6 @@ static int __devinit bt878_probe(struct pci_dev *dev, pci_set_master(dev); pci_set_drvdata(dev, bt); -/* if(init_bt878(btv) < 0) { - bt878_remove(dev); - return -EIO; - } -*/ - if ((result = bt878_mem_alloc(bt))) { printk(KERN_ERR "bt878: failed to allocate memory!\n"); goto fail2; @@ -583,7 +577,7 @@ static struct pci_driver bt878_pci_driver = { .name = "bt878", .id_table = bt878_pci_tbl, .probe = bt878_probe, - .remove = bt878_remove, + .remove = __devexit_p(bt878_remove), }; static int bt878_pci_driver_registered; diff --git a/linux/drivers/media/dvb/dm1105/dm1105.c b/linux/drivers/media/dvb/dm1105/dm1105.c index ca1048fd4..17edeb66b 100644 --- a/linux/drivers/media/dvb/dm1105/dm1105.c +++ b/linux/drivers/media/dvb/dm1105/dm1105.c @@ -51,6 +51,9 @@ #ifndef PCI_VENDOR_ID_TRIGEM #define PCI_VENDOR_ID_TRIGEM 0x109f #endif +#ifndef PCI_VENDOR_ID_AXESS +#define PCI_VENDOR_ID_AXESS 0x195d +#endif #ifndef PCI_DEVICE_ID_DM1105 #define PCI_DEVICE_ID_DM1105 0x036f #endif @@ -60,6 +63,9 @@ #ifndef PCI_DEVICE_ID_DW2004 #define PCI_DEVICE_ID_DW2004 0x2004 #endif +#ifndef PCI_DEVICE_ID_DM05 +#define PCI_DEVICE_ID_DM05 0x1105 +#endif /* ----------------------------------------------- */ /* sdmc dm1105 registers */ @@ -150,6 +156,11 @@ #define DM1105_LNB_13V 0x00010100 #define DM1105_LNB_18V 0x00000100 +/* GPIO's for LNB power control for Axess DM05 */ +#define DM05_LNB_MASK 0x00000000 +#define DM05_LNB_13V 0x00020000 +#define DM05_LNB_18V 0x00030000 + static int ir_debug; module_param(ir_debug, int, 0644); MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding"); @@ -188,6 +199,8 @@ struct dm1105dvb { /* irq */ struct work_struct work; + struct workqueue_struct *wq; + char wqn[16]; /* dma */ dma_addr_t dma_addr; @@ -316,15 +329,25 @@ static inline struct dm1105dvb *frontend_to_dm1105dvb(struct dvb_frontend *fe) static int dm1105dvb_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { struct dm1105dvb *dm1105dvb = frontend_to_dm1105dvb(fe); + u32 lnb_mask, lnb_13v, lnb_18v; - if (voltage == SEC_VOLTAGE_18) { - outl(DM1105_LNB_MASK, dm_io_mem(DM1105_GPIOCTR)); - outl(DM1105_LNB_18V, dm_io_mem(DM1105_GPIOVAL)); - } else { - /*LNB ON-13V by default!*/ - outl(DM1105_LNB_MASK, dm_io_mem(DM1105_GPIOCTR)); - outl(DM1105_LNB_13V, dm_io_mem(DM1105_GPIOVAL)); - } + switch (dm1105dvb->pdev->subsystem_device) { + case PCI_DEVICE_ID_DM05: + lnb_mask = DM05_LNB_MASK; + lnb_13v = DM05_LNB_13V; + lnb_18v = DM05_LNB_18V; + break; + default: + lnb_mask = DM1105_LNB_MASK; + lnb_13v = DM1105_LNB_13V; + lnb_18v = DM1105_LNB_18V; + } + + outl(lnb_mask, dm_io_mem(DM1105_GPIOCTR)); + if (voltage == SEC_VOLTAGE_18) + outl(lnb_18v , dm_io_mem(DM1105_GPIOVAL)); + else + outl(lnb_13v, dm_io_mem(DM1105_GPIOVAL)); return 0; } @@ -463,7 +486,7 @@ static irqreturn_t dm1105dvb_irq(int irq, void *dev_id) case (INTSTS_TSIRQ | INTSTS_IR): dm1105dvb->nextwrp = inl(dm_io_mem(DM1105_WRP)) - inl(dm_io_mem(DM1105_STADR)); - schedule_work(&dm1105dvb->work); + queue_work(dm1105dvb->wq, &dm1105dvb->work); break; case INTSTS_IR: dm1105dvb->ir.ir_command = inl(dm_io_mem(DM1105_IRCODE)); @@ -599,46 +622,44 @@ static int __devinit frontend_init(struct dm1105dvb *dm1105dvb) int ret; switch (dm1105dvb->pdev->subsystem_device) { - case PCI_DEVICE_ID_DW2002: + case PCI_DEVICE_ID_DW2004: dm1105dvb->fe = dvb_attach( - stv0299_attach, &sharp_z0194a_config, + cx24116_attach, &serit_sp2633_config, &dm1105dvb->i2c_adap); + if (dm1105dvb->fe) + dm1105dvb->fe->ops.set_voltage = dm1105dvb_set_voltage; + break; + default: + dm1105dvb->fe = dvb_attach( + stv0299_attach, &sharp_z0194a_config, + &dm1105dvb->i2c_adap); if (dm1105dvb->fe) { dm1105dvb->fe->ops.set_voltage = dm1105dvb_set_voltage; dvb_attach(dvb_pll_attach, dm1105dvb->fe, 0x60, &dm1105dvb->i2c_adap, DVB_PLL_OPERA1); + break; } - if (!dm1105dvb->fe) { - dm1105dvb->fe = dvb_attach( - stv0288_attach, &earda_config, - &dm1105dvb->i2c_adap); - if (dm1105dvb->fe) { - dm1105dvb->fe->ops.set_voltage = - dm1105dvb_set_voltage; - dvb_attach(stb6000_attach, dm1105dvb->fe, 0x61, - &dm1105dvb->i2c_adap); - } + dm1105dvb->fe = dvb_attach( + stv0288_attach, &earda_config, + &dm1105dvb->i2c_adap); + if (dm1105dvb->fe) { + dm1105dvb->fe->ops.set_voltage = + dm1105dvb_set_voltage; + dvb_attach(stb6000_attach, dm1105dvb->fe, 0x61, + &dm1105dvb->i2c_adap); + break; } - if (!dm1105dvb->fe) { - dm1105dvb->fe = dvb_attach( - si21xx_attach, &serit_config, - &dm1105dvb->i2c_adap); - if (dm1105dvb->fe) - dm1105dvb->fe->ops.set_voltage = - dm1105dvb_set_voltage; - } - break; - case PCI_DEVICE_ID_DW2004: dm1105dvb->fe = dvb_attach( - cx24116_attach, &serit_sp2633_config, + si21xx_attach, &serit_config, &dm1105dvb->i2c_adap); if (dm1105dvb->fe) - dm1105dvb->fe->ops.set_voltage = dm1105dvb_set_voltage; - break; + dm1105dvb->fe->ops.set_voltage = + dm1105dvb_set_voltage; + } if (!dm1105dvb->fe) { @@ -662,10 +683,17 @@ static void __devinit dm1105dvb_read_mac(struct dm1105dvb *dm1105dvb, u8 *mac) static u8 command[1] = { 0x28 }; struct i2c_msg msg[] = { - { .addr = IIC_24C01_addr >> 1, .flags = 0, - .buf = command, .len = 1 }, - { .addr = IIC_24C01_addr >> 1, .flags = I2C_M_RD, - .buf = mac, .len = 6 }, + { + .addr = IIC_24C01_addr >> 1, + .flags = 0, + .buf = command, + .len = 1 + }, { + .addr = IIC_24C01_addr >> 1, + .flags = I2C_M_RD, + .buf = mac, + .len = 6 + }, }; dm1105_i2c_xfer(&dm1105dvb->i2c_adap, msg , 2); @@ -788,14 +816,22 @@ static int __devinit dm1105_probe(struct pci_dev *pdev, #else INIT_WORK(&dm1105dvb->work, dm1105_dmx_buffer); #endif + sprintf(dm1105dvb->wqn, "%s/%d", dvb_adapter->name, dvb_adapter->num); + dm1105dvb->wq = create_singlethread_workqueue(dm1105dvb->wqn); + if (!dm1105dvb->wq) + goto err_dvb_net; ret = request_irq(pdev->irq, dm1105dvb_irq, IRQF_SHARED, DRIVER_NAME, dm1105dvb); if (ret < 0) - goto err_free_irq; + goto err_workqueue; return 0; +err_workqueue: + destroy_workqueue(dm1105dvb->wq); +err_dvb_net: + dvb_net_release(&dm1105dvb->dvbnet); err_disconnect_frontend: dmx->disconnect_frontend(dmx); err_remove_mem_frontend: @@ -812,8 +848,6 @@ err_i2c_del_adapter: i2c_del_adapter(&dm1105dvb->i2c_adap); err_dm1105dvb_hw_exit: dm1105dvb_hw_exit(dm1105dvb); -err_free_irq: - free_irq(pdev->irq, dm1105dvb); err_pci_iounmap: pci_iounmap(pdev, dm1105dvb->io_mem); err_pci_release_regions: @@ -870,6 +904,11 @@ static struct pci_device_id dm1105_id_table[] __devinitdata = { .subvendor = PCI_ANY_ID, .subdevice = PCI_DEVICE_ID_DW2004, }, { + .vendor = PCI_VENDOR_ID_AXESS, + .device = PCI_DEVICE_ID_DM05, + .subvendor = PCI_VENDOR_ID_AXESS, + .subdevice = PCI_DEVICE_ID_DM05, + }, { /* empty */ }, }; diff --git a/linux/drivers/media/dvb/dvb-core/dmxdev.c b/linux/drivers/media/dvb/dvb-core/dmxdev.c index c35fbb8d8..6d6121eb5 100644 --- a/linux/drivers/media/dvb/dvb-core/dmxdev.c +++ b/linux/drivers/media/dvb/dvb-core/dmxdev.c @@ -244,19 +244,13 @@ static ssize_t dvb_dvr_read(struct file *file, char __user *buf, size_t count, { struct dvb_device *dvbdev = file->private_data; struct dmxdev *dmxdev = dvbdev->priv; - int ret; - if (dmxdev->exit) { - mutex_unlock(&dmxdev->mutex); + if (dmxdev->exit) return -ENODEV; - } - //mutex_lock(&dmxdev->mutex); - ret = dvb_dmxdev_buffer_read(&dmxdev->dvr_buffer, - file->f_flags & O_NONBLOCK, - buf, count, ppos); - //mutex_unlock(&dmxdev->mutex); - return ret; + return dvb_dmxdev_buffer_read(&dmxdev->dvr_buffer, + file->f_flags & O_NONBLOCK, + buf, count, ppos); } static int dvb_dvr_set_buffer_size(struct dmxdev *dmxdev, diff --git a/linux/drivers/media/dvb/dvb-core/dvb_demux.c b/linux/drivers/media/dvb/dvb-core/dvb_demux.c index e2eca0b1f..cfe2768d2 100644 --- a/linux/drivers/media/dvb/dvb-core/dvb_demux.c +++ b/linux/drivers/media/dvb/dvb-core/dvb_demux.c @@ -38,6 +38,16 @@ */ // #define DVB_DEMUX_SECTION_LOSS_LOG +static int dvb_demux_tscheck; +module_param(dvb_demux_tscheck, int, 0644); +MODULE_PARM_DESC(dvb_demux_tscheck, + "enable transport stream continuity and TEI check"); + +#define dprintk_tscheck(x...) do { \ + if (dvb_demux_tscheck && printk_ratelimit()) \ + printk(x); \ + } while (0) + /****************************************************************************** * static inlined helper functions ******************************************************************************/ @@ -376,6 +386,36 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf) u16 pid = ts_pid(buf); int dvr_done = 0; + if (dvb_demux_tscheck) { + if (!demux->cnt_storage) + demux->cnt_storage = vmalloc(MAX_PID + 1); + + if (!demux->cnt_storage) { + printk(KERN_WARNING "Couldn't allocate memory for TS/TEI check. Disabling it\n"); + dvb_demux_tscheck = 0; + goto no_dvb_demux_tscheck; + } + + /* check pkt counter */ + if (pid < MAX_PID) { + if (buf[1] & 0x80) + dprintk_tscheck("TEI detected. " + "PID=0x%x data1=0x%x\n", + pid, buf[1]); + + if ((buf[3] & 0xf) != demux->cnt_storage[pid]) + dprintk_tscheck("TS packet counter mismatch. " + "PID=0x%x expected 0x%x " + "got 0x%x\n", + pid, demux->cnt_storage[pid], + buf[3] & 0xf); + + demux->cnt_storage[pid] = ((buf[3] & 0xf) + 1)&0xf; + }; + /* end check */ + }; +no_dvb_demux_tscheck: + list_for_each_entry(feed, &demux->feed_list, list_head) { if ((feed->pid != pid) && (feed->pid != 0x2000)) continue; @@ -1160,6 +1200,7 @@ int dvb_dmx_init(struct dvb_demux *dvbdemux) int i; struct dmx_demux *dmx = &dvbdemux->dmx; + dvbdemux->cnt_storage = NULL; dvbdemux->users = 0; dvbdemux->filter = vmalloc(dvbdemux->filternum * sizeof(struct dvb_demux_filter)); @@ -1226,6 +1267,7 @@ EXPORT_SYMBOL(dvb_dmx_init); void dvb_dmx_release(struct dvb_demux *dvbdemux) { + vfree(dvbdemux->cnt_storage); vfree(dvbdemux->filter); vfree(dvbdemux->feed); } diff --git a/linux/drivers/media/dvb/dvb-core/dvb_demux.h b/linux/drivers/media/dvb/dvb-core/dvb_demux.h index 933397c24..1e0ade4ec 100644 --- a/linux/drivers/media/dvb/dvb-core/dvb_demux.h +++ b/linux/drivers/media/dvb/dvb-core/dvb_demux.h @@ -43,6 +43,8 @@ #define DVB_DEMUX_MASK_MAX 18 +#define MAX_PID 0x1fff + struct dvb_demux_filter { struct dmx_section_filter filter; u8 maskandmode[DMX_MAX_FILTER_SIZE]; @@ -128,6 +130,8 @@ struct dvb_demux { struct mutex mutex; spinlock_t lock; + + uint8_t *cnt_storage; /* for TS continuity check */ }; int dvb_dmx_init(struct dvb_demux *dvbdemux); diff --git a/linux/drivers/media/dvb/dvb-core/dvb_frontend.c b/linux/drivers/media/dvb/dvb-core/dvb_frontend.c index da2890b22..41166d407 100644 --- a/linux/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/linux/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -554,6 +554,7 @@ restart: if (kthread_should_stop() || dvb_frontend_is_exiting(fe)) { /* got signal or quitting */ + fepriv->exit = 1; break; } @@ -667,6 +668,7 @@ restart: } fepriv->thread = NULL; + fepriv->exit = 0; mb(); dvb_frontend_wakeup(fe); diff --git a/linux/drivers/media/dvb/dvb-core/dvb_net.c b/linux/drivers/media/dvb/dvb-core/dvb_net.c index 5f4856c6d..1eede48a9 100644 --- a/linux/drivers/media/dvb/dvb-core/dvb_net.c +++ b/linux/drivers/media/dvb/dvb-core/dvb_net.c @@ -126,7 +126,9 @@ static void hexdump( const unsigned char *buf, unsigned short len ) struct dvb_net_priv { int in_use; +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29) struct net_device_stats stats; +#endif u16 pid; #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) struct net_device *net; @@ -391,8 +393,13 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) if (priv->ule_skb) { dev_kfree_skb( priv->ule_skb ); /* Prepare for next SNDU. */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29) priv->stats.rx_errors++; priv->stats.rx_frame_errors++; +#else + dev->stats.rx_errors++; + dev->stats.rx_frame_errors++; +#endif } reset_ule(priv); priv->need_pusi = 1; @@ -445,8 +452,13 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) dev_kfree_skb( priv->ule_skb ); /* Prepare for next SNDU. */ // reset_ule(priv); moved to below. +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29) priv->stats.rx_errors++; priv->stats.rx_frame_errors++; +#else + dev->stats.rx_errors++; + dev->stats.rx_frame_errors++; +#endif } reset_ule(priv); /* skip to next PUSI. */ @@ -467,8 +479,13 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) /* Drop partly decoded SNDU, reset state, resync on PUSI. */ if (priv->ule_skb) { dev_kfree_skb( priv->ule_skb ); +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29) priv->stats.rx_errors++; priv->stats.rx_frame_errors++; +#else + dev->stats.rx_errors++; + dev->stats.rx_frame_errors++; +#endif } reset_ule(priv); priv->need_pusi = 1; @@ -484,8 +501,13 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) if (priv->ule_sndu_remain > 183) { /* Current SNDU lacks more data than there could be available in the * current TS cell. */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29) priv->stats.rx_errors++; priv->stats.rx_length_errors++; +#else + dev->stats.rx_errors++; + dev->stats.rx_length_errors++; +#endif printk(KERN_WARNING "%lu: Expected %d more SNDU bytes, but " "got PUSI (pf %d, ts_remain %d). Flushing incomplete payload.\n", priv->ts_count, priv->ule_sndu_remain, ts[4], ts_remain); @@ -527,8 +549,13 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) if (priv->ule_sndu_len < 5) { printk(KERN_WARNING "%lu: Invalid ULE SNDU length %u. " "Resyncing.\n", priv->ts_count, priv->ule_sndu_len); +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29) priv->stats.rx_errors++; priv->stats.rx_length_errors++; +#else + dev->stats.rx_errors++; + dev->stats.rx_length_errors++; +#endif priv->ule_sndu_len = 0; priv->need_pusi = 1; new_ts = 1; @@ -580,7 +607,11 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) if (priv->ule_skb == NULL) { printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name); +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29) priv->stats.rx_dropped++; +#else + dev->stats.rx_dropped++; +#endif return; } @@ -653,8 +684,13 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) ule_dump = 1; #endif +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29) priv->stats.rx_errors++; priv->stats.rx_crc_errors++; +#else + dev->stats.rx_errors++; + dev->stats.rx_crc_errors++; +#endif dev_kfree_skb(priv->ule_skb); } else { /* CRC32 verified OK. */ @@ -764,8 +800,13 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) * receive the packet anyhow. */ /* if (priv->ule_dbit && skb->pkt_type == PACKET_OTHERHOST) priv->ule_skb->pkt_type = PACKET_HOST; */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29) priv->stats.rx_packets++; priv->stats.rx_bytes += priv->ule_skb->len; +#else + dev->stats.rx_packets++; + dev->stats.rx_bytes += priv->ule_skb->len; +#endif netif_rx(priv->ule_skb); } sndu_done: @@ -820,8 +861,12 @@ static void dvb_net_sec(struct net_device *dev, { u8 *eth; struct sk_buff *skb; +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29) struct net_device_stats *stats = &((struct dvb_net_priv *) netdev_priv(dev))->stats; +#else + struct net_device_stats *stats = &dev->stats; +#endif int snap = 0; /* note: pkt_len includes a 32bit checksum */ @@ -1269,11 +1314,12 @@ static int dvb_net_stop(struct net_device *dev) return dvb_net_feed_stop(dev); } +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29) static struct net_device_stats * dvb_net_get_stats(struct net_device *dev) { return &((struct dvb_net_priv *) netdev_priv(dev))->stats; } - +#endif #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) static const struct header_ops dvb_header_ops = { .create = eth_header, @@ -1282,6 +1328,19 @@ static const struct header_ops dvb_header_ops = { }; #endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 29) +static const struct net_device_ops dvb_netdev_ops = { + .ndo_open = dvb_net_open, + .ndo_stop = dvb_net_stop, + .ndo_start_xmit = dvb_net_tx, + .ndo_set_multicast_list = dvb_net_set_multicast_list, + .ndo_set_mac_address = dvb_net_set_mac, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, +}; +#endif + static void dvb_net_setup(struct net_device *dev) { ether_setup(dev); @@ -1291,12 +1350,16 @@ static void dvb_net_setup(struct net_device *dev) #else dev->hard_header_cache = NULL; #endif +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29) dev->open = dvb_net_open; dev->stop = dvb_net_stop; dev->hard_start_xmit = dvb_net_tx; dev->get_stats = dvb_net_get_stats; dev->set_multicast_list = dvb_net_set_multicast_list; dev->set_mac_address = dvb_net_set_mac; +#else + dev->netdev_ops = &dvb_netdev_ops; +#endif dev->mtu = 4096; dev->mc_count = 0; diff --git a/linux/drivers/media/dvb/dvb-usb/Kconfig b/linux/drivers/media/dvb/dvb-usb/Kconfig index 60955a70d..496c1a370 100644 --- a/linux/drivers/media/dvb/dvb-usb/Kconfig +++ b/linux/drivers/media/dvb/dvb-usb/Kconfig @@ -216,7 +216,7 @@ config DVB_USB_TTUSB2 help Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The firmware protocol used by this module is similar to the one used by the - old ttusb-driver - that's why the module is called dvb-usb-ttusb2.ko. + old ttusb-driver - that's why the module is called dvb-usb-ttusb2. config DVB_USB_DTT200U tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)" @@ -261,6 +261,7 @@ config DVB_USB_DW2102 select DVB_STB6000 if !DVB_FE_CUSTOMISE select DVB_CX24116 if !DVB_FE_CUSTOMISE select DVB_SI21XX if !DVB_FE_CUSTOMISE + select DVB_TDA10021 if !DVB_FE_CUSTOMISE help Say Y here to support the DvbWorld DVB-S/S2 USB2.0 receivers and the TeVii S650. diff --git a/linux/drivers/media/dvb/dvb-usb/af9015.c b/linux/drivers/media/dvb/dvb-usb/af9015.c index 5d9aacd0a..b6fc8ddf3 100644 --- a/linux/drivers/media/dvb/dvb-usb/af9015.c +++ b/linux/drivers/media/dvb/dvb-usb/af9015.c @@ -541,7 +541,7 @@ exit: /* dump eeprom */ static int af9015_eeprom_dump(struct dvb_usb_device *d) { - char buf[52], buf2[4]; + char buf[4+3*16+1], buf2[4]; u8 reg, val; for (reg = 0; ; reg++) { @@ -1268,6 +1268,7 @@ static struct usb_device_id af9015_usb_table[] = { {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A805)}, {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CONCEPTRONIC_CTVDIGRCU)}, {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_MC810)}, + {USB_DEVICE(USB_VID_KYE, USB_PID_GENIUS_TVGO_DVB_T03)}, {0}, }; MODULE_DEVICE_TABLE(usb, af9015_usb_table); @@ -1538,7 +1539,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .i2c_algo = &af9015_i2c_algo, - .num_device_descs = 3, /* max 9 */ + .num_device_descs = 4, /* max 9 */ .devices = { { .name = "AverMedia AVerTV Volar GPS 805 (A805)", @@ -1556,6 +1557,11 @@ static struct dvb_usb_device_properties af9015_properties[] = { .cold_ids = {&af9015_usb_table[23], NULL}, .warm_ids = {NULL}, }, + { + .name = "Genius TVGo DVB-T03", + .cold_ids = {&af9015_usb_table[24], NULL}, + .warm_ids = {NULL}, + }, } }, }; diff --git a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c index e39993df0..eda025714 100644 --- a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1346,9 +1346,9 @@ static int dib0700_xc5000_tuner_callback(void *priv, int component, if (command == XC5000_TUNER_RESET) { /* Reset the tuner */ dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0); - msleep(330); /* from Windows USB trace */ + msleep(10); dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1); - msleep(330); /* from Windows USB trace */ + msleep(10); } else { err("xc5000: unknown tuner callback command: %d\n", command); return -EINVAL; @@ -1498,6 +1498,9 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_MC770) }, { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT) }, /* 50 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_Dlx) }, + { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_H) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T3) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T5) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1731,8 +1734,9 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[30], NULL }, { NULL }, }, - { "Terratec Cinergy T USB XXS", - { &dib0700_usb_id_table[33], NULL }, + { "Terratec Cinergy T USB XXS/ T3", + { &dib0700_usb_id_table[33], + &dib0700_usb_id_table[52], NULL }, { NULL }, }, { "Elgato EyeTV DTT", @@ -1793,8 +1797,9 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[36], NULL }, { NULL }, }, - { "Terratec Cinergy DT USB XS Diversity", - { &dib0700_usb_id_table[43], NULL }, + { "Terratec Cinergy DT USB XS Diversity/ T5", + { &dib0700_usb_id_table[43], + &dib0700_usb_id_table[53], NULL}, { NULL }, }, { "Sony PlayTV", @@ -1821,7 +1826,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 7, + .num_device_descs = 8, .devices = { { "Terratec Cinergy HT USB XE", { &dib0700_usb_id_table[27], NULL }, @@ -1851,6 +1856,11 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[48], NULL }, { NULL }, }, + { "Leadtek WinFast DTV Dongle H", + { &dib0700_usb_id_table[51], NULL }, + { NULL }, + }, + }, .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dib0700_rc_keys, diff --git a/linux/drivers/media/dvb/dvb-usb/dibusb-common.c b/linux/drivers/media/dvb/dvb-usb/dibusb-common.c index d774879df..99b3b9a43 100644 --- a/linux/drivers/media/dvb/dvb-usb/dibusb-common.c +++ b/linux/drivers/media/dvb/dvb-usb/dibusb-common.c @@ -133,14 +133,17 @@ static int dibusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num for (i = 0; i < num; i++) { /* write/read request */ - if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { + if (i+1 < num && (msg[i].flags & I2C_M_RD) == 0 + && (msg[i+1].flags & I2C_M_RD)) { if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len, msg[i+1].buf,msg[i+1].len) < 0) break; i++; - } else + } else if ((msg[i].flags & I2C_M_RD) == 0) { if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len,NULL,0) < 0) break; + } else + break; } mutex_unlock(&d->i2c_mutex); diff --git a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 1b5e65f1d..9593b7289 100644 --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -98,6 +98,7 @@ #define USB_PID_DPOSH_M9206_COLD 0x9206 #define USB_PID_DPOSH_M9206_WARM 0xa090 #define USB_PID_UNIWILL_STK7700P 0x6003 +#define USB_PID_GENIUS_TVGO_DVB_T03 0x4012 #define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0 #define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1 #define USB_PID_INTEL_CE9500 0x9500 @@ -181,6 +182,8 @@ #define USB_PID_TERRATEC_CINERGY_HT_EXPRESS 0x0060 #define USB_PID_TERRATEC_CINERGY_T_EXPRESS 0x0062 #define USB_PID_TERRATEC_CINERGY_T_XXS 0x0078 +#define USB_PID_TERRATEC_T3 0x10a0 +#define USB_PID_TERRATEC_T5 0x10a1 #define USB_PID_PINNACLE_EXPRESSCARD_320CX 0x022e #define USB_PID_PINNACLE_PCTV2000E 0x022c #define USB_PID_PINNACLE_PCTV_DVB_T_FLASH 0x0228 @@ -225,6 +228,7 @@ #define USB_PID_WINFAST_DTV_DONGLE_COLD 0x6025 #define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026 #define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00 +#define USB_PID_WINFAST_DTV_DONGLE_H 0x60f6 #define USB_PID_WINFAST_DTV_DONGLE_STK7700P_2 0x6f01 #define USB_PID_WINFAST_DTV_DONGLE_GOLD 0x6029 #define USB_PID_GENPIX_8PSK_REV_1_COLD 0x0200 diff --git a/linux/drivers/media/dvb/dvb-usb/dw2102.c b/linux/drivers/media/dvb/dvb-usb/dw2102.c index 2b8ee587b..0fc9be43a 100644 --- a/linux/drivers/media/dvb/dvb-usb/dw2102.c +++ b/linux/drivers/media/dvb/dvb-usb/dw2102.c @@ -1,7 +1,7 @@ /* DVB USB framework compliant Linux driver for the -* DVBWorld DVB-S 2101, 2102, DVB-S2 2104 Card -* -* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by) +* DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C 3101, +* TeVii S600, S650 Cards +* Copyright (C) 2008,2009 Igor M. Liplianin (liplianin@me.by) * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -17,6 +17,7 @@ #include "stb6000.h" #include "eds1547.h" #include "cx24116.h" +#include "tda1002x.h" #ifndef USB_PID_DW2102 #define USB_PID_DW2102 0x2102 @@ -26,10 +27,18 @@ #define USB_PID_DW2104 0x2104 #endif +#ifndef USB_PID_DW3101 +#define USB_PID_DW3101 0x3101 +#endif + #ifndef USB_PID_CINERGY_S #define USB_PID_CINERGY_S 0x0064 #endif +#ifndef USB_PID_TEVII_S650 +#define USB_PID_TEVII_S650 0xd650 +#endif + #define DW210X_READ_MSG 0 #define DW210X_WRITE_MSG 1 @@ -40,18 +49,21 @@ #define DW2102_VOLTAGE_CTRL (0x1800) #define DW2102_RC_QUERY (0x1a00) -struct dw210x_state { - u32 last_key_pressed; -}; -struct dw210x_rc_keys { - u32 keycode; - u32 event; +struct dvb_usb_rc_keys_table { + struct dvb_usb_rc_key *rc_keys; + int rc_keys_size; }; /* debug */ static int dvb_usb_dw2102_debug; module_param_named(debug, dvb_usb_dw2102_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer (or-able))." DVB_USB_DEBUG_STATUS); +MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer 4=rc(or-able))." + DVB_USB_DEBUG_STATUS); + +/* keymaps */ +static int ir_keymap; +module_param_named(keymap, ir_keymap, int, 0644); +MODULE_PARM_DESC(keymap, "set keymap 0=default 1=dvbworld 2=tevii 3=tbs ..."); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -79,7 +91,7 @@ static int dw210x_op_rw(struct usb_device *dev, u8 request, u16 value, static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) { -struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct dvb_usb_device *d = i2c_get_adapdata(adap); int i = 0, ret = 0; u8 buf6[] = {0x2c, 0x05, 0xc0, 0, 0, 0, 0}; u16 value; @@ -205,6 +217,7 @@ static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap, mutex_unlock(&d->i2c_mutex); return num; } + static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) { struct dvb_usb_device *d = i2c_get_adapdata(adap); @@ -219,7 +232,7 @@ static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg ms case 2: { /* read */ /* first write first register number */ - u8 ibuf [msg[1].len + 2], obuf[3]; + u8 ibuf[msg[1].len + 2], obuf[3]; obuf[0] = 0xd0; obuf[1] = msg[0].len; obuf[2] = msg[0].buf[0]; @@ -293,7 +306,7 @@ static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i case 2: { /* read */ /* first write first register number */ - u8 ibuf [msg[1].len + 2], obuf[3]; + u8 ibuf[msg[1].len + 2], obuf[3]; obuf[0] = 0xaa; obuf[1] = msg[0].len; obuf[2] = msg[0].buf[0]; @@ -360,6 +373,69 @@ static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i return num; } +static int dw3101_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int ret = 0, i; + + if (!d) + return -ENODEV; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + switch (num) { + case 2: { + /* read */ + /* first write first register number */ + u8 ibuf[msg[1].len + 2], obuf[3]; + obuf[0] = msg[0].addr << 1; + obuf[1] = msg[0].len; + obuf[2] = msg[0].buf[0]; + ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW210X_WRITE_MSG); + /* second read registers */ + ret = dw210x_op_rw(d->udev, 0xc3, 0x19 , 0, + ibuf, msg[1].len + 2, DW210X_READ_MSG); + memcpy(msg[1].buf, ibuf + 2, msg[1].len); + + break; + } + case 1: + switch (msg[0].addr) { + case 0x60: + case 0x0c: { + /* write to register */ + u8 obuf[msg[0].len + 2]; + obuf[0] = msg[0].addr << 1; + obuf[1] = msg[0].len; + memcpy(obuf + 2, msg[0].buf, msg[0].len); + ret = dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW210X_WRITE_MSG); + break; + } + case(DW2102_RC_QUERY): { + u8 ibuf[2]; + ret = dw210x_op_rw(d->udev, 0xb8, 0, 0, + ibuf, 2, DW210X_READ_MSG); + memcpy(msg[0].buf, ibuf , 2); + break; + } + } + + break; + } + + for (i = 0; i < num; i++) { + deb_xfer("%02x:%02x: %s ", i, msg[i].addr, + msg[i].flags == 0 ? ">>>" : "<<<"); + debug_dump(msg[i].buf, msg[i].len, deb_xfer); + } + + mutex_unlock(&d->i2c_mutex); + return num; +} + static u32 dw210x_i2c_func(struct i2c_adapter *adapter) { return I2C_FUNC_I2C; @@ -397,6 +473,14 @@ static struct i2c_algorithm dw2104_i2c_algo = { #endif }; +static struct i2c_algorithm dw3101_i2c_algo = { + .master_xfer = dw3101_i2c_transfer, + .functionality = dw210x_i2c_func, +#ifdef NEED_ALGO_CONTROL + .algo_control = dummy_algo_control, +#endif +}; + static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) { int i; @@ -416,6 +500,7 @@ static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) debug_dump(eepromline, 16, deb_xfer); } } + memcpy(mac, eeprom + 8, 6); return 0; }; @@ -460,6 +545,11 @@ static struct si21xx_config serit_sp1511lhb_config = { }; +static struct tda10023_config dw3101_tda10023_config = { + .demod_address = 0x0c, + .invert = 1, +}; + static int dw2104_frontend_attach(struct dvb_usb_adapter *d) { if ((d->fe = dvb_attach(cx24116_attach, &dw2104_config, @@ -472,6 +562,7 @@ static int dw2104_frontend_attach(struct dvb_usb_adapter *d) } static struct dvb_usb_device_properties dw2102_properties; +static struct dvb_usb_device_properties dw2104_properties; static int dw2102_frontend_attach(struct dvb_usb_adapter *d) { @@ -509,6 +600,17 @@ static int dw2102_frontend_attach(struct dvb_usb_adapter *d) return -EIO; } +static int dw3101_frontend_attach(struct dvb_usb_adapter *d) +{ + d->fe = dvb_attach(tda10023_attach, &dw3101_tda10023_config, + &d->dev->i2c_adap, 0x48); + if (d->fe != NULL) { + info("Attached tda10023!\n"); + return 0; + } + return -EIO; +} + static int dw2102_tuner_attach(struct dvb_usb_adapter *adap) { dvb_attach(dvb_pll_attach, adap->fe, 0x60, @@ -524,6 +626,14 @@ static int dw2102_earda_tuner_attach(struct dvb_usb_adapter *adap) return 0; } +static int dw3101_tuner_attach(struct dvb_usb_adapter *adap) +{ + dvb_attach(dvb_pll_attach, adap->fe, 0x60, + &adap->dev->i2c_adap, DVB_PLL_TUA6034); + + return 0; +} + static struct dvb_usb_rc_key dw210x_rc_keys[] = { { 0xf8, 0x0a, KEY_Q }, /*power*/ { 0xf8, 0x0c, KEY_M }, /*mute*/ @@ -556,44 +666,147 @@ static struct dvb_usb_rc_key dw210x_rc_keys[] = { { 0xf8, 0x40, KEY_F }, /*full*/ { 0xf8, 0x1e, KEY_W }, /*tvmode*/ { 0xf8, 0x1b, KEY_B }, /*recall*/ +}; +static struct dvb_usb_rc_key tevii_rc_keys[] = { + { 0xf8, 0x0a, KEY_POWER }, + { 0xf8, 0x0c, KEY_MUTE }, + { 0xf8, 0x11, KEY_1 }, + { 0xf8, 0x12, KEY_2 }, + { 0xf8, 0x13, KEY_3 }, + { 0xf8, 0x14, KEY_4 }, + { 0xf8, 0x15, KEY_5 }, + { 0xf8, 0x16, KEY_6 }, + { 0xf8, 0x17, KEY_7 }, + { 0xf8, 0x18, KEY_8 }, + { 0xf8, 0x19, KEY_9 }, + { 0xf8, 0x10, KEY_0 }, + { 0xf8, 0x1c, KEY_MENU }, + { 0xf8, 0x0f, KEY_VOLUMEDOWN }, + { 0xf8, 0x1a, KEY_LAST }, + { 0xf8, 0x0e, KEY_OPEN }, + { 0xf8, 0x04, KEY_RECORD }, + { 0xf8, 0x09, KEY_VOLUMEUP }, + { 0xf8, 0x08, KEY_CHANNELUP }, + { 0xf8, 0x07, KEY_PVR }, + { 0xf8, 0x0b, KEY_TIME }, + { 0xf8, 0x02, KEY_RIGHT }, + { 0xf8, 0x03, KEY_LEFT }, + { 0xf8, 0x00, KEY_UP }, + { 0xf8, 0x1f, KEY_OK }, + { 0xf8, 0x01, KEY_DOWN }, + { 0xf8, 0x05, KEY_TUNER }, + { 0xf8, 0x06, KEY_CHANNELDOWN }, + { 0xf8, 0x40, KEY_PLAYPAUSE }, + { 0xf8, 0x1e, KEY_REWIND }, + { 0xf8, 0x1b, KEY_FAVORITES }, + { 0xf8, 0x1d, KEY_BACK }, + { 0xf8, 0x4d, KEY_FASTFORWARD }, + { 0xf8, 0x44, KEY_EPG }, + { 0xf8, 0x4c, KEY_INFO }, + { 0xf8, 0x41, KEY_AB }, + { 0xf8, 0x43, KEY_AUDIO }, + { 0xf8, 0x45, KEY_SUBTITLE }, + { 0xf8, 0x4a, KEY_LIST }, + { 0xf8, 0x46, KEY_F1 }, + { 0xf8, 0x47, KEY_F2 }, + { 0xf8, 0x5e, KEY_F3 }, + { 0xf8, 0x5c, KEY_F4 }, + { 0xf8, 0x52, KEY_F5 }, + { 0xf8, 0x5a, KEY_F6 }, + { 0xf8, 0x56, KEY_MODE }, + { 0xf8, 0x58, KEY_SWITCHVIDEOMODE }, }; +static struct dvb_usb_rc_key tbs_rc_keys[] = { + { 0xf8, 0x84, KEY_POWER }, + { 0xf8, 0x94, KEY_MUTE }, + { 0xf8, 0x87, KEY_1 }, + { 0xf8, 0x86, KEY_2 }, + { 0xf8, 0x85, KEY_3 }, + { 0xf8, 0x8b, KEY_4 }, + { 0xf8, 0x8a, KEY_5 }, + { 0xf8, 0x89, KEY_6 }, + { 0xf8, 0x8f, KEY_7 }, + { 0xf8, 0x8e, KEY_8 }, + { 0xf8, 0x8d, KEY_9 }, + { 0xf8, 0x92, KEY_0 }, + { 0xf8, 0x96, KEY_CHANNELUP }, + { 0xf8, 0x91, KEY_CHANNELDOWN }, + { 0xf8, 0x93, KEY_VOLUMEUP }, + { 0xf8, 0x8c, KEY_VOLUMEDOWN }, + { 0xf8, 0x83, KEY_RECORD }, + { 0xf8, 0x98, KEY_PAUSE }, + { 0xf8, 0x99, KEY_OK }, + { 0xf8, 0x9a, KEY_SHUFFLE }, + { 0xf8, 0x81, KEY_UP }, + { 0xf8, 0x90, KEY_LEFT }, + { 0xf8, 0x82, KEY_RIGHT }, + { 0xf8, 0x88, KEY_DOWN }, + { 0xf8, 0x95, KEY_FAVORITES }, + { 0xf8, 0x97, KEY_SUBTITLE }, + { 0xf8, 0x9d, KEY_ZOOM }, + { 0xf8, 0x9f, KEY_EXIT }, + { 0xf8, 0x9e, KEY_MENU }, + { 0xf8, 0x9c, KEY_EPG }, + { 0xf8, 0x80, KEY_PREVIOUS }, + { 0xf8, 0x9b, KEY_MODE } +}; +static struct dvb_usb_rc_keys_table keys_tables[] = { + { dw210x_rc_keys, ARRAY_SIZE(dw210x_rc_keys) }, + { tevii_rc_keys, ARRAY_SIZE(tevii_rc_keys) }, + { tbs_rc_keys, ARRAY_SIZE(tbs_rc_keys) }, +}; static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { - struct dw210x_state *st = d->priv; + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + int keymap_size = d->props.rc_key_map_size; u8 key[2]; - struct i2c_msg msg[] = { - {.addr = DW2102_RC_QUERY, .flags = I2C_M_RD, .buf = key, - .len = 2}, + struct i2c_msg msg = { + .addr = DW2102_RC_QUERY, + .flags = I2C_M_RD, + .buf = key, + .len = 2 }; int i; + /* override keymap */ + if ((ir_keymap > 0) && (ir_keymap <= ARRAY_SIZE(keys_tables))) { + keymap = keys_tables[ir_keymap - 1].rc_keys ; + keymap_size = keys_tables[ir_keymap - 1].rc_keys_size; + } *state = REMOTE_NO_KEY_PRESSED; - if (dw2102_i2c_transfer(&d->i2c_adap, msg, 1) == 1) { - for (i = 0; i < ARRAY_SIZE(dw210x_rc_keys); i++) { - if (dw210x_rc_keys[i].data == msg[0].buf[0]) { + if (dw2102_i2c_transfer(&d->i2c_adap, &msg, 1) == 1) { + for (i = 0; i < keymap_size ; i++) { + if (keymap[i].data == msg.buf[0]) { *state = REMOTE_KEY_PRESSED; - *event = dw210x_rc_keys[i].event; - st->last_key_pressed = - dw210x_rc_keys[i].event; + *event = keymap[i].event; break; } - st->last_key_pressed = 0; + } + + if ((*state) == REMOTE_KEY_PRESSED) + deb_rc("%s: found rc key: %x, %x, event: %x\n", + __func__, key[0], key[1], (*event)); + else if (key[0] != 0xff) + deb_rc("%s: unknown rc key: %x, %x\n", + __func__, key[0], key[1]); + } - /* info("key: %x %x\n",key[0],key[1]); */ + return 0; } static struct usb_device_id dw2102_table[] = { {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2102)}, {USB_DEVICE(USB_VID_CYPRESS, 0x2101)}, - {USB_DEVICE(USB_VID_CYPRESS, 0x2104)}, - {USB_DEVICE(0x9022, 0xd650)}, + {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2104)}, + {USB_DEVICE(0x9022, USB_PID_TEVII_S650)}, {USB_DEVICE(USB_VID_TERRATEC, USB_PID_CINERGY_S)}, + {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW3101)}, { } }; @@ -654,11 +867,16 @@ static int dw2102_load_firmware(struct usb_device *dev, } /* init registers */ switch (dev->descriptor.idProduct) { + case USB_PID_TEVII_S650: + dw2104_properties.rc_key_map = tevii_rc_keys; + dw2104_properties.rc_key_map_size = + ARRAY_SIZE(tevii_rc_keys); case USB_PID_DW2104: - case 0xd650: reset = 1; dw210x_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1, DW210X_WRITE_MSG); + /* break omitted intentionally */ + case USB_PID_DW3101: reset = 0; dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, DW210X_WRITE_MSG); @@ -702,6 +920,7 @@ static int dw2102_load_firmware(struct usb_device *dev, DW210X_READ_MSG); break; } + msleep(100); kfree(p); } @@ -712,7 +931,6 @@ static struct dvb_usb_device_properties dw2102_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, .usb_ctrl = DEVICE_SPECIFIC, .firmware = "dvb-usb-dw2102.fw", - .size_of_priv = sizeof(struct dw210x_state), .no_reconnect = 1, .i2c_algo = &dw2102_serit_i2c_algo, @@ -726,7 +944,7 @@ static struct dvb_usb_device_properties dw2102_properties = { .num_adapters = 1, .download_firmware = dw2102_load_firmware, .read_mac_address = dw210x_read_mac_address, - .adapter = { + .adapter = { { .frontend_attach = dw2102_frontend_attach, .streaming_ctrl = NULL, @@ -764,7 +982,6 @@ static struct dvb_usb_device_properties dw2104_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, .usb_ctrl = DEVICE_SPECIFIC, .firmware = "dvb-usb-dw2104.fw", - .size_of_priv = sizeof(struct dw210x_state), .no_reconnect = 1, .i2c_algo = &dw2104_i2c_algo, @@ -808,12 +1025,57 @@ static struct dvb_usb_device_properties dw2104_properties = { } }; +static struct dvb_usb_device_properties dw3101_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, + .firmware = "dvb-usb-dw3101.fw", + .no_reconnect = 1, + + .i2c_algo = &dw3101_i2c_algo, + .rc_key_map = dw210x_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dw210x_rc_keys), + .rc_interval = 150, + .rc_query = dw2102_rc_query, + + .generic_bulk_ctrl_endpoint = 0x81, + /* parameter for the MPEG2-data transfer */ + .num_adapters = 1, + .download_firmware = dw2102_load_firmware, + .read_mac_address = dw210x_read_mac_address, + .adapter = { + { + .frontend_attach = dw3101_frontend_attach, + .streaming_ctrl = NULL, + .tuner_attach = dw3101_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + } + }, + .num_device_descs = 1, + .devices = { + { "DVBWorld DVB-C 3101 USB2.0", + {&dw2102_table[5], NULL}, + {NULL}, + }, + } +}; + static int dw2102_probe(struct usb_interface *intf, const struct usb_device_id *id) { if (0 == dvb_usb_device_init(intf, &dw2102_properties, THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &dw2104_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &dw3101_properties, THIS_MODULE, NULL, adapter_nr)) { return 0; } @@ -845,6 +1107,8 @@ module_init(dw2102_module_init); module_exit(dw2102_module_exit); MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by"); -MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104 USB2.0 device"); +MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104," + " DVB-C 3101 USB2.0," + " TeVii S600, S650 USB2.0 devices"); MODULE_VERSION("0.1"); MODULE_LICENSE("GPL"); diff --git a/linux/drivers/media/dvb/dvb-usb/dw2102.h b/linux/drivers/media/dvb/dvb-usb/dw2102.h index e3370734e..5cd0b0eb6 100644 --- a/linux/drivers/media/dvb/dvb-usb/dw2102.h +++ b/linux/drivers/media/dvb/dvb-usb/dw2102.h @@ -5,4 +5,5 @@ #include "dvb-usb.h" #define deb_xfer(args...) dprintk(dvb_usb_dw2102_debug, 0x02, args) +#define deb_rc(args...) dprintk(dvb_usb_dw2102_debug, 0x04, args) #endif diff --git a/linux/drivers/media/dvb/dvb-usb/gp8psk.c b/linux/drivers/media/dvb/dvb-usb/gp8psk.c index 3dd684386..003d97f8c 100644 --- a/linux/drivers/media/dvb/dvb-usb/gp8psk.c +++ b/linux/drivers/media/dvb/dvb-usb/gp8psk.c @@ -223,7 +223,7 @@ static struct usb_device_id gp8psk_usb_table [] = { { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_WARM) }, { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_2) }, { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_1) }, - { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) }, +/* { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) }, */ { 0 }, }; MODULE_DEVICE_TABLE(usb, gp8psk_usb_table); @@ -254,7 +254,7 @@ static struct dvb_usb_device_properties gp8psk_properties = { .generic_bulk_ctrl_endpoint = 0x01, - .num_device_descs = 4, + .num_device_descs = 3, .devices = { { .name = "Genpix 8PSK-to-USB2 Rev.1 DVB-S receiver", .cold_ids = { &gp8psk_usb_table[0], NULL }, @@ -268,10 +268,12 @@ static struct dvb_usb_device_properties gp8psk_properties = { .cold_ids = { NULL }, .warm_ids = { &gp8psk_usb_table[3], NULL }, }, +#if 0 { .name = "Genpix SkyWalker-CW3K DVB-S receiver", .cold_ids = { NULL }, .warm_ids = { &gp8psk_usb_table[4], NULL }, }, +#endif { NULL }, } }; diff --git a/linux/drivers/media/dvb/frontends/au8522_dig.c b/linux/drivers/media/dvb/frontends/au8522_dig.c index 41aedcc99..9375905ee 100644 --- a/linux/drivers/media/dvb/frontends/au8522_dig.c +++ b/linux/drivers/media/dvb/frontends/au8522_dig.c @@ -367,11 +367,90 @@ static struct { { 0x8231, 0x13 }, }; -/* QAM Modulation table */ +/* QAM64 Modulation table */ static struct { u16 reg; u16 data; -} QAM_mod_tab[] = { +} QAM64_mod_tab[] = { + { 0x00a3, 0x09 }, + { 0x00a4, 0x00 }, + { 0x0081, 0xc4 }, + { 0x00a5, 0x40 }, + { 0x00aa, 0x77 }, + { 0x00ad, 0x77 }, + { 0x00a6, 0x67 }, + { 0x0262, 0x20 }, + { 0x021c, 0x30 }, + { 0x00b8, 0x3e }, + { 0x00b9, 0xf0 }, + { 0x00ba, 0x01 }, + { 0x00bb, 0x18 }, + { 0x00bc, 0x50 }, + { 0x00bd, 0x00 }, + { 0x00be, 0xea }, + { 0x00bf, 0xef }, + { 0x00c0, 0xfc }, + { 0x00c1, 0xbd }, + { 0x00c2, 0x1f }, + { 0x00c3, 0xfc }, + { 0x00c4, 0xdd }, + { 0x00c5, 0xaf }, + { 0x00c6, 0x00 }, + { 0x00c7, 0x38 }, + { 0x00c8, 0x30 }, + { 0x00c9, 0x05 }, + { 0x00ca, 0x4a }, + { 0x00cb, 0xd0 }, + { 0x00cc, 0x01 }, + { 0x00cd, 0xd9 }, + { 0x00ce, 0x6f }, + { 0x00cf, 0xf9 }, + { 0x00d0, 0x70 }, + { 0x00d1, 0xdf }, + { 0x00d2, 0xf7 }, + { 0x00d3, 0xc2 }, + { 0x00d4, 0xdf }, + { 0x00d5, 0x02 }, + { 0x00d6, 0x9a }, + { 0x00d7, 0xd0 }, + { 0x0250, 0x0d }, + { 0x0251, 0xcd }, + { 0x0252, 0xe0 }, + { 0x0253, 0x05 }, + { 0x0254, 0xa7 }, + { 0x0255, 0xff }, + { 0x0256, 0xed }, + { 0x0257, 0x5b }, + { 0x0258, 0xae }, + { 0x0259, 0xe6 }, + { 0x025a, 0x3d }, + { 0x025b, 0x0f }, + { 0x025c, 0x0d }, + { 0x025d, 0xea }, + { 0x025e, 0xf2 }, + { 0x025f, 0x51 }, + { 0x0260, 0xf5 }, + { 0x0261, 0x06 }, + { 0x021a, 0x00 }, + { 0x0546, 0x40 }, + { 0x0210, 0xc7 }, + { 0x0211, 0xaa }, + { 0x0212, 0xab }, + { 0x0213, 0x02 }, + { 0x0502, 0x00 }, + { 0x0121, 0x04 }, + { 0x0122, 0x04 }, + { 0x052e, 0x10 }, + { 0x00a4, 0xca }, + { 0x00a7, 0x40 }, + { 0x0526, 0x01 }, +}; + +/* QAM256 Modulation table */ +static struct { + u16 reg; + u16 data; +} QAM256_mod_tab[] = { { 0x80a3, 0x09 }, { 0x80a4, 0x00 }, { 0x8081, 0xc4 }, @@ -464,12 +543,19 @@ static int au8522_enable_modulation(struct dvb_frontend *fe, au8522_set_if(fe, state->config->vsb_if); break; case QAM_64: + dprintk("%s() QAM 64\n", __func__); + for (i = 0; i < ARRAY_SIZE(QAM64_mod_tab); i++) + au8522_writereg(state, + QAM64_mod_tab[i].reg, + QAM64_mod_tab[i].data); + au8522_set_if(fe, state->config->qam_if); + break; case QAM_256: - dprintk("%s() QAM 64/256\n", __func__); - for (i = 0; i < ARRAY_SIZE(QAM_mod_tab); i++) + dprintk("%s() QAM 256\n", __func__); + for (i = 0; i < ARRAY_SIZE(QAM256_mod_tab); i++) au8522_writereg(state, - QAM_mod_tab[i].reg, - QAM_mod_tab[i].data); + QAM256_mod_tab[i].reg, + QAM256_mod_tab[i].data); au8522_set_if(fe, state->config->qam_if); break; default: diff --git a/linux/drivers/media/dvb/frontends/lgdt3305.c b/linux/drivers/media/dvb/frontends/lgdt3305.c index f0c0c8199..b16410c64 100644 --- a/linux/drivers/media/dvb/frontends/lgdt3305.c +++ b/linux/drivers/media/dvb/frontends/lgdt3305.c @@ -19,6 +19,7 @@ * */ +#include <asm/div64.h> #include "compat.h" #include <linux/dvb/frontend.h> #include "dvb_math.h" @@ -497,27 +498,15 @@ static int lgdt3305_set_if(struct lgdt3305_state *state, nco = if_freq_khz / 10; -#define LGDT3305_64BIT_DIVISION_ENABLED 0 - /* FIXME: 64bit division disabled to avoid linking error: - * WARNING: "__udivdi3" [lgdt3305.ko] undefined! - */ switch (param->u.vsb.modulation) { case VSB_8: -#if LGDT3305_64BIT_DIVISION_ENABLED nco <<= 24; - nco /= 625; -#else - nco *= ((1 << 24) / 625); -#endif + do_div(nco, 625); break; case QAM_64: case QAM_256: -#if LGDT3305_64BIT_DIVISION_ENABLED nco <<= 28; - nco /= 625; -#else - nco *= ((1 << 28) / 625); -#endif + do_div(nco, 625); break; default: return -EINVAL; diff --git a/linux/drivers/media/dvb/frontends/lgs8gxx.c b/linux/drivers/media/dvb/frontends/lgs8gxx.c index 1395f3b5b..1ce30aa53 100644 --- a/linux/drivers/media/dvb/frontends/lgs8gxx.c +++ b/linux/drivers/media/dvb/frontends/lgs8gxx.c @@ -37,14 +37,14 @@ } while (0) static int debug; -static int fake_signal_str; +static int fake_signal_str = 1; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); module_param(fake_signal_str, int, 0644); MODULE_PARM_DESC(fake_signal_str, "fake signal strength for LGS8913." -"Signal strength calculation is slow.(default:off)."); +"Signal strength calculation is slow.(default:on)."); /* LGS8GXX internal helper functions */ @@ -650,7 +650,7 @@ static int lgs8gxx_read_signal_agc(struct lgs8gxx_state *priv, u16 *signal) else cat = 0; - *signal = cat; + *signal = cat * 65535 / 5; return 0; } @@ -670,8 +670,8 @@ static int lgs8913_read_signal_strength(struct lgs8gxx_state *priv, u16 *signal) if (fake_signal_str) { if ((t & 0xC0) == 0xC0) { - dprintk("Fake signal strength as 50\n"); - *signal = 0x32; + dprintk("Fake signal strength\n"); + *signal = 0x7FFF; } else *signal = 0; return 0; diff --git a/linux/drivers/media/dvb/frontends/lnbp21.c b/linux/drivers/media/dvb/frontends/lnbp21.c index 1dcc56f32..71f607fe8 100644 --- a/linux/drivers/media/dvb/frontends/lnbp21.c +++ b/linux/drivers/media/dvb/frontends/lnbp21.c @@ -133,7 +133,7 @@ static struct dvb_frontend *lnbx2x_attach(struct dvb_frontend *fe, /* override frontend ops */ fe->ops.set_voltage = lnbp21_set_voltage; fe->ops.enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage; - printk(KERN_INFO "LNBx2x attached on addr=%x", lnbp21->i2c_addr); + printk(KERN_INFO "LNBx2x attached on addr=%x\n", lnbp21->i2c_addr); return fe; } diff --git a/linux/drivers/media/dvb/frontends/mt312.c b/linux/drivers/media/dvb/frontends/mt312.c index 5ac9b1592..a621f7279 100644 --- a/linux/drivers/media/dvb/frontends/mt312.c +++ b/linux/drivers/media/dvb/frontends/mt312.c @@ -77,7 +77,7 @@ static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg, ret = i2c_transfer(state->i2c, msg, 2); if (ret != 2) { - printk(KERN_ERR "%s: ret == %d\n", __func__, ret); + printk(KERN_DEBUG "%s: ret == %d\n", __func__, ret); return -EREMOTEIO; } diff --git a/linux/drivers/media/dvb/frontends/stv0900.h b/linux/drivers/media/dvb/frontends/stv0900.h index 8a1332c20..bf4e9b633 100644 --- a/linux/drivers/media/dvb/frontends/stv0900.h +++ b/linux/drivers/media/dvb/frontends/stv0900.h @@ -29,6 +29,11 @@ #include <linux/dvb/frontend.h> #include "dvb_frontend.h" +struct stv0900_reg { + u16 addr; + u8 val; +}; + struct stv0900_config { u8 demod_address; u32 xtal; @@ -38,7 +43,7 @@ struct stv0900_config { u8 path1_mode; u8 path2_mode; - + struct stv0900_reg *ts_config_regs; u8 tun1_maddress;/* 0, 1, 2, 3 for 0xc0, 0xc2, 0xc4, 0xc6 */ u8 tun2_maddress; u8 tun1_adc;/* 1 for stv6110, 2 for stb6100 */ diff --git a/linux/drivers/media/dvb/frontends/stv0900_core.c b/linux/drivers/media/dvb/frontends/stv0900_core.c index 899b1e7ed..84bf35edb 100644 --- a/linux/drivers/media/dvb/frontends/stv0900_core.c +++ b/linux/drivers/media/dvb/frontends/stv0900_core.c @@ -149,31 +149,31 @@ void stv0900_write_reg(struct stv0900_internal *i_params, u16 reg_addr, dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret); } -u8 stv0900_read_reg(struct stv0900_internal *i_params, u16 reg_addr) +u8 stv0900_read_reg(struct stv0900_internal *i_params, u16 reg) { - u8 data[2]; int ret; - struct i2c_msg i2cmsg = { - .addr = i_params->i2c_addr, - .flags = 0, - .len = 2, - .buf = data, + u8 b0[] = { MSB(reg), LSB(reg) }; + u8 buf = 0; + struct i2c_msg msg[] = { + { + .addr = i_params->i2c_addr, + .flags = 0, + .buf = b0, + .len = 2, + }, { + .addr = i_params->i2c_addr, + .flags = I2C_M_RD, + .buf = &buf, + .len = 1, + }, }; - data[0] = MSB(reg_addr); - data[1] = LSB(reg_addr); - - ret = i2c_transfer(i_params->i2c_adap, &i2cmsg, 1); - if (ret != 1) - dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret); - - i2cmsg.flags = I2C_M_RD; - i2cmsg.len = 1; - ret = i2c_transfer(i_params->i2c_adap, &i2cmsg, 1); - if (ret != 1) - dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret); + ret = i2c_transfer(i_params->i2c_adap, msg, 2); + if (ret != 2) + dprintk(KERN_ERR "%s: i2c error %d, reg[0x%02x]\n", + __func__, ret, reg); - return data[0]; + return buf; } void extract_mask_pos(u32 label, u8 *mask, u8 *pos) @@ -716,6 +716,44 @@ static s32 stv0900_carr_get_quality(struct dvb_frontend *fe, return c_n; } +static int stv0900_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *i_params = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + u8 err_val1, err_val0; + s32 err_field1, err_field0; + u32 header_err_val = 0; + + *ucblocks = 0x0; + if (stv0900_get_standard(fe, demod) == STV0900_DVBS2_STANDARD) { + /* DVB-S2 delineator errors count */ + + /* retreiving number for errnous headers */ + dmd_reg(err_field0, R0900_P1_BBFCRCKO0, + R0900_P2_BBFCRCKO0); + dmd_reg(err_field1, R0900_P1_BBFCRCKO1, + R0900_P2_BBFCRCKO1); + + err_val1 = stv0900_read_reg(i_params, err_field1); + err_val0 = stv0900_read_reg(i_params, err_field0); + header_err_val = (err_val1<<8) | err_val0; + + /* retreiving number for errnous packets */ + dmd_reg(err_field0, R0900_P1_UPCRCKO0, + R0900_P2_UPCRCKO0); + dmd_reg(err_field1, R0900_P1_UPCRCKO1, + R0900_P2_UPCRCKO1); + + err_val1 = stv0900_read_reg(i_params, err_field1); + err_val0 = stv0900_read_reg(i_params, err_field0); + *ucblocks = (err_val1<<8) | err_val0; + *ucblocks += header_err_val; + } + + return 0; +} + static int stv0900_read_snr(struct dvb_frontend *fe, u16 *snr) { *snr = stv0900_carr_get_quality(fe, @@ -1359,7 +1397,7 @@ static enum fe_stv0900_error stv0900_init_internal(struct dvb_frontend *fe, struct stv0900_state *state = fe->demodulator_priv; enum fe_stv0900_error error = STV0900_NO_ERROR; enum fe_stv0900_error demodError = STV0900_NO_ERROR; - int selosci; + int selosci, i; struct stv0900_inode *temp_int = find_inode(state->i2c_adap, state->config->demod_address); @@ -1406,7 +1444,23 @@ static enum fe_stv0900_error stv0900_init_internal(struct dvb_frontend *fe, stv0900_write_bits(state->internal, F0900_P1_ROLLOFF_CONTROL, p_init->rolloff); stv0900_write_bits(state->internal, F0900_P2_ROLLOFF_CONTROL, p_init->rolloff); - stv0900_set_ts_parallel_serial(state->internal, p_init->path1_ts_clock, p_init->path2_ts_clock); + state->internal->ts_config = p_init->ts_config; + if (state->internal->ts_config == NULL) + stv0900_set_ts_parallel_serial(state->internal, + p_init->path1_ts_clock, + p_init->path2_ts_clock); + else { + for (i = 0; state->internal->ts_config[i].addr != 0xffff; i++) + stv0900_write_reg(state->internal, + state->internal->ts_config[i].addr, + state->internal->ts_config[i].val); + + stv0900_write_bits(state->internal, F0900_P2_RST_HWARE, 1); + stv0900_write_bits(state->internal, F0900_P2_RST_HWARE, 0); + stv0900_write_bits(state->internal, F0900_P1_RST_HWARE, 1); + stv0900_write_bits(state->internal, F0900_P1_RST_HWARE, 0); + } + stv0900_write_bits(state->internal, F0900_P1_TUN_MADDRESS, p_init->tun1_maddress); switch (p_init->tuner1_adc) { case 1: @@ -1897,6 +1951,7 @@ static struct dvb_frontend_ops stv0900_ops = { .read_ber = stv0900_read_ber, .read_signal_strength = stv0900_read_signal_strength, .read_snr = stv0900_read_snr, + .read_ucblocks = stv0900_read_ucblocks, }; struct dvb_frontend *stv0900_attach(const struct stv0900_config *config, @@ -1930,6 +1985,7 @@ struct dvb_frontend *stv0900_attach(const struct stv0900_config *config, init_params.tun1_iq_inversion = STV0900_IQ_NORMAL; init_params.tuner1_adc = config->tun1_adc; init_params.path2_ts_clock = config->path2_mode; + init_params.ts_config = config->ts_config_regs; init_params.tun2_maddress = config->tun2_maddress; init_params.tuner2_adc = config->tun2_adc; init_params.tun2_iq_inversion = STV0900_IQ_SWAPPED; diff --git a/linux/drivers/media/dvb/frontends/stv0900_priv.h b/linux/drivers/media/dvb/frontends/stv0900_priv.h index 67dc8ec63..5ed7a145c 100644 --- a/linux/drivers/media/dvb/frontends/stv0900_priv.h +++ b/linux/drivers/media/dvb/frontends/stv0900_priv.h @@ -271,6 +271,7 @@ struct stv0900_init_params{ /* IQ from the tuner2 to the demod */ enum stv0900_iq_inversion tun2_iq_inversion; + struct stv0900_reg *ts_config; }; struct stv0900_search_params { @@ -363,6 +364,7 @@ struct stv0900_internal{ u8 i2c_addr; u8 clkmode;/* 0 for CLKI, 2 for XTALI */ u8 chip_id; + struct stv0900_reg *ts_config; enum fe_stv0900_error errs; int dmds_used; }; diff --git a/linux/drivers/media/dvb/siano/Makefile b/linux/drivers/media/dvb/siano/Makefile index 6354a4718..c6644d909 100644 --- a/linux/drivers/media/dvb/siano/Makefile +++ b/linux/drivers/media/dvb/siano/Makefile @@ -1,4 +1,4 @@ -sms1xxx-objs := smscoreapi.o sms-cards.o smsendian.o +sms1xxx-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o obj-$(CONFIG_DVB_SIANO_SMS1XXX) += sms1xxx.o obj-$(CONFIG_DVB_SIANO_SMS1XXX) += smsusb.o diff --git a/linux/drivers/media/dvb/siano/sms-cards.c b/linux/drivers/media/dvb/siano/sms-cards.c index 63e4d0ec6..d8b15d583 100644 --- a/linux/drivers/media/dvb/siano/sms-cards.c +++ b/linux/drivers/media/dvb/siano/sms-cards.c @@ -18,6 +18,7 @@ */ #include "sms-cards.h" +#include "smsir.h" static int sms_dbg; module_param_named(cards_dbg, sms_dbg, int, 0644); @@ -30,17 +31,14 @@ static struct sms_board sms_boards[] = { [SMS1XXX_BOARD_SIANO_STELLAR] = { .name = "Siano Stellar Digital Receiver", .type = SMS_STELLAR, - .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-stellar-dvbt-01.fw", }, [SMS1XXX_BOARD_SIANO_NOVA_A] = { .name = "Siano Nova A Digital Receiver", .type = SMS_NOVA_A0, - .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-a-dvbt-01.fw", }, [SMS1XXX_BOARD_SIANO_NOVA_B] = { .name = "Siano Nova B Digital Receiver", .type = SMS_NOVA_B0, - .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-nova-b-dvbt-01.fw", }, [SMS1XXX_BOARD_SIANO_VEGA] = { .name = "Siano Vega Digital Receiver", @@ -65,6 +63,9 @@ static struct sms_board sms_boards[] = { .name = "Hauppauge WinTV MiniStick", .type = SMS_NOVA_B0, .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw", + .board_cfg.leds_power = 26, + .board_cfg.led0 = 27, + .board_cfg.led1 = 28, .led_power = 26, .led_lo = 27, .led_hi = 28, @@ -74,7 +75,9 @@ static struct sms_board sms_boards[] = { .type = SMS_NOVA_B0, .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw", .lna_ctrl = 29, + .board_cfg.foreign_lna0_ctrl = 29, .rf_switch = 17, + .board_cfg.rf_switch_uhf = 17, }, [SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2] = { .name = "Hauppauge WinTV MiniCard", @@ -82,6 +85,16 @@ static struct sms_board sms_boards[] = { .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw", .lna_ctrl = -1, }, + [SMS1XXX_BOARD_SIANO_NICE] = { + /* 11 */ + .name = "Siano Nice Digital Receiver", + .type = SMS_NOVA_B0, + }, + [SMS1XXX_BOARD_SIANO_VENICE] = { + /* 12 */ + .name = "Siano Venice Digital Receiver", + .type = SMS_VEGA, + }, }; struct sms_board *sms_get_board(int id) @@ -91,12 +104,179 @@ struct sms_board *sms_get_board(int id) return &sms_boards[id]; } EXPORT_SYMBOL_GPL(sms_get_board); +static inline void sms_gpio_assign_11xx_default_led_config( + struct smscore_gpio_config *pGpioConfig) { + pGpioConfig->Direction = SMS_GPIO_DIRECTION_OUTPUT; + pGpioConfig->InputCharacteristics = + SMS_GPIO_INPUT_CHARACTERISTICS_NORMAL; + pGpioConfig->OutputDriving = SMS_GPIO_OUTPUT_DRIVING_4mA; + pGpioConfig->OutputSlewRate = SMS_GPIO_OUTPUT_SLEW_RATE_0_45_V_NS; + pGpioConfig->PullUpDown = SMS_GPIO_PULL_UP_DOWN_NONE; +} + +int sms_board_event(struct smscore_device_t *coredev, + enum SMS_BOARD_EVENTS gevent) { + int board_id = smscore_get_board_id(coredev); + struct sms_board *board = sms_get_board(board_id); + struct smscore_gpio_config MyGpioConfig; + + sms_gpio_assign_11xx_default_led_config(&MyGpioConfig); + + switch (gevent) { + case BOARD_EVENT_POWER_INIT: /* including hotplug */ + switch (board_id) { + case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: + /* set I/O and turn off all LEDs */ + smscore_gpio_configure(coredev, + board->board_cfg.leds_power, + &MyGpioConfig); + smscore_gpio_set_level(coredev, + board->board_cfg.leds_power, 0); + smscore_gpio_configure(coredev, board->board_cfg.led0, + &MyGpioConfig); + smscore_gpio_set_level(coredev, + board->board_cfg.led0, 0); + smscore_gpio_configure(coredev, board->board_cfg.led1, + &MyGpioConfig); + smscore_gpio_set_level(coredev, + board->board_cfg.led1, 0); + break; + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2: + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD: + /* set I/O and turn off LNA */ + smscore_gpio_configure(coredev, + board->board_cfg.foreign_lna0_ctrl, + &MyGpioConfig); + smscore_gpio_set_level(coredev, + board->board_cfg.foreign_lna0_ctrl, + 0); + break; + } + break; /* BOARD_EVENT_BIND */ + + case BOARD_EVENT_POWER_SUSPEND: + switch (board_id) { + case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: + smscore_gpio_set_level(coredev, + board->board_cfg.leds_power, 0); + smscore_gpio_set_level(coredev, + board->board_cfg.led0, 0); + smscore_gpio_set_level(coredev, + board->board_cfg.led1, 0); + break; + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2: + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD: + smscore_gpio_set_level(coredev, + board->board_cfg.foreign_lna0_ctrl, + 0); + break; + } + break; /* BOARD_EVENT_POWER_SUSPEND */ + + case BOARD_EVENT_POWER_RESUME: + switch (board_id) { + case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: + smscore_gpio_set_level(coredev, + board->board_cfg.leds_power, 1); + smscore_gpio_set_level(coredev, + board->board_cfg.led0, 1); + smscore_gpio_set_level(coredev, + board->board_cfg.led1, 0); + break; + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2: + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD: + smscore_gpio_set_level(coredev, + board->board_cfg.foreign_lna0_ctrl, + 1); + break; + } + break; /* BOARD_EVENT_POWER_RESUME */ + + case BOARD_EVENT_BIND: + switch (board_id) { + case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: + smscore_gpio_set_level(coredev, + board->board_cfg.leds_power, 1); + smscore_gpio_set_level(coredev, + board->board_cfg.led0, 1); + smscore_gpio_set_level(coredev, + board->board_cfg.led1, 0); + break; + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2: + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD: + smscore_gpio_set_level(coredev, + board->board_cfg.foreign_lna0_ctrl, + 1); + break; + } + break; /* BOARD_EVENT_BIND */ + + case BOARD_EVENT_SCAN_PROG: + break; /* BOARD_EVENT_SCAN_PROG */ + case BOARD_EVENT_SCAN_COMP: + break; /* BOARD_EVENT_SCAN_COMP */ + case BOARD_EVENT_EMERGENCY_WARNING_SIGNAL: + break; /* BOARD_EVENT_EMERGENCY_WARNING_SIGNAL */ + case BOARD_EVENT_FE_LOCK: + switch (board_id) { + case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: + smscore_gpio_set_level(coredev, + board->board_cfg.led1, 1); + break; + } + break; /* BOARD_EVENT_FE_LOCK */ + case BOARD_EVENT_FE_UNLOCK: + switch (board_id) { + case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: + smscore_gpio_set_level(coredev, + board->board_cfg.led1, 0); + break; + } + break; /* BOARD_EVENT_FE_UNLOCK */ + case BOARD_EVENT_DEMOD_LOCK: + break; /* BOARD_EVENT_DEMOD_LOCK */ + case BOARD_EVENT_DEMOD_UNLOCK: + break; /* BOARD_EVENT_DEMOD_UNLOCK */ + case BOARD_EVENT_RECEPTION_MAX_4: + break; /* BOARD_EVENT_RECEPTION_MAX_4 */ + case BOARD_EVENT_RECEPTION_3: + break; /* BOARD_EVENT_RECEPTION_3 */ + case BOARD_EVENT_RECEPTION_2: + break; /* BOARD_EVENT_RECEPTION_2 */ + case BOARD_EVENT_RECEPTION_1: + break; /* BOARD_EVENT_RECEPTION_1 */ + case BOARD_EVENT_RECEPTION_LOST_0: + break; /* BOARD_EVENT_RECEPTION_LOST_0 */ + case BOARD_EVENT_MULTIPLEX_OK: + switch (board_id) { + case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: + smscore_gpio_set_level(coredev, + board->board_cfg.led1, 1); + break; + } + break; /* BOARD_EVENT_MULTIPLEX_OK */ + case BOARD_EVENT_MULTIPLEX_ERRORS: + switch (board_id) { + case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: + smscore_gpio_set_level(coredev, + board->board_cfg.led1, 0); + break; + } + break; /* BOARD_EVENT_MULTIPLEX_ERRORS */ + + default: + sms_err("Unknown SMS board event"); + break; + } + return 0; +} +EXPORT_SYMBOL_GPL(sms_board_event); static int sms_set_gpio(struct smscore_device_t *coredev, int pin, int enable) { int lvl, ret; u32 gpio; - struct smscore_gpio_config gpioconfig = { + struct smscore_config_gpio gpioconfig = { .direction = SMS_GPIO_DIRECTION_OUTPUT, .pullupdown = SMS_GPIO_PULLUPDOWN_NONE, .inputcharacteristics = SMS_GPIO_INPUTCHARACTERISTICS_NORMAL, diff --git a/linux/drivers/media/dvb/siano/sms-cards.h b/linux/drivers/media/dvb/siano/sms-cards.h index 64d74c59c..38f062f6a 100644 --- a/linux/drivers/media/dvb/siano/sms-cards.h +++ b/linux/drivers/media/dvb/siano/sms-cards.h @@ -22,6 +22,7 @@ #include <linux/usb.h> #include "smscoreapi.h" +#include "smsir.h" #define SMS_BOARD_UNKNOWN 0 #define SMS1XXX_BOARD_SIANO_STELLAR 1 @@ -34,10 +35,47 @@ #define SMS1XXX_BOARD_HAUPPAUGE_WINDHAM 8 #define SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD 9 #define SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2 10 +#define SMS1XXX_BOARD_SIANO_NICE 11 +#define SMS1XXX_BOARD_SIANO_VENICE 12 + +struct sms_board_gpio_cfg { + int lna_vhf_exist; + int lna_vhf_ctrl; + int lna_uhf_exist; + int lna_uhf_ctrl; + int lna_uhf_d_ctrl; + int lna_sband_exist; + int lna_sband_ctrl; + int lna_sband_d_ctrl; + int foreign_lna0_ctrl; + int foreign_lna1_ctrl; + int foreign_lna2_ctrl; + int rf_switch_vhf; + int rf_switch_uhf; + int rf_switch_sband; + int leds_power; + int led0; + int led1; + int led2; + int led3; + int led4; + int ir; + int eeprom_wp; + int mrc_sense; + int mrc_pdn_resetn; + int mrc_gp0; /* mrcs spi int */ + int mrc_gp1; + int mrc_gp2; + int mrc_gp3; + int mrc_gp4; + int host_spi_gsp_ts_int; +}; struct sms_board { enum sms_device_type_st type; char *name, *fw[DEVICE_MODE_MAX]; + struct sms_board_gpio_cfg board_cfg; + enum ir_kb_type ir_kb_type; /* gpios */ int led_power, led_hi, led_lo, lna_ctrl, rf_switch; @@ -45,6 +83,32 @@ struct sms_board { struct sms_board *sms_get_board(int id); +extern struct smscore_device_t *coredev; + +enum SMS_BOARD_EVENTS { + BOARD_EVENT_POWER_INIT, + BOARD_EVENT_POWER_SUSPEND, + BOARD_EVENT_POWER_RESUME, + BOARD_EVENT_BIND, + BOARD_EVENT_SCAN_PROG, + BOARD_EVENT_SCAN_COMP, + BOARD_EVENT_EMERGENCY_WARNING_SIGNAL, + BOARD_EVENT_FE_LOCK, + BOARD_EVENT_FE_UNLOCK, + BOARD_EVENT_DEMOD_LOCK, + BOARD_EVENT_DEMOD_UNLOCK, + BOARD_EVENT_RECEPTION_MAX_4, + BOARD_EVENT_RECEPTION_3, + BOARD_EVENT_RECEPTION_2, + BOARD_EVENT_RECEPTION_1, + BOARD_EVENT_RECEPTION_LOST_0, + BOARD_EVENT_MULTIPLEX_OK, + BOARD_EVENT_MULTIPLEX_ERRORS +}; + +int sms_board_event(struct smscore_device_t *coredev, + enum SMS_BOARD_EVENTS gevent); + int sms_board_setup(struct smscore_device_t *coredev); #define SMS_LED_OFF 0 diff --git a/linux/drivers/media/dvb/siano/smscoreapi.c b/linux/drivers/media/dvb/siano/smscoreapi.c index 15272dbb5..54f59f24e 100644 --- a/linux/drivers/media/dvb/siano/smscoreapi.c +++ b/linux/drivers/media/dvb/siano/smscoreapi.c @@ -30,9 +30,13 @@ #include <linux/io.h> #include <linux/firmware.h> +#include <linux/wait.h> +#include <asm/byteorder.h> #include "smscoreapi.h" #include "sms-cards.h" +#include "smsir.h" +#include "smsendian.h" static int sms_dbg; module_param_named(debug, sms_dbg, int, 0644); @@ -348,6 +352,13 @@ int smscore_register_device(struct smsdevice_params_t *params, init_completion(&dev->init_device_done); init_completion(&dev->reload_start_done); init_completion(&dev->resume_done); + init_completion(&dev->gpio_configuration_done); + init_completion(&dev->gpio_set_level_done); + init_completion(&dev->gpio_get_level_done); + init_completion(&dev->ir_init_done); + + /* Buffer management */ + init_waitqueue_head(&dev->buffer_mng_waitq); /* alloc common buffer */ dev->common_buffer_size = params->buffer_size * params->num_buffers; @@ -403,6 +414,71 @@ int smscore_register_device(struct smsdevice_params_t *params, } EXPORT_SYMBOL_GPL(smscore_register_device); + +static int smscore_sendrequest_and_wait(struct smscore_device_t *coredev, + void *buffer, size_t size, struct completion *completion) { + int rc = coredev->sendrequest_handler(coredev->context, buffer, size); + if (rc < 0) { + sms_info("sendrequest returned error %d", rc); + return rc; + } + + return wait_for_completion_timeout(completion, + msecs_to_jiffies(SMS_PROTOCOL_MAX_RAOUNDTRIP_MS)) ? + 0 : -ETIME; +} + +/** + * Starts & enables IR operations + * + * @return 0 on success, < 0 on error. + */ +static int smscore_init_ir(struct smscore_device_t *coredev) +{ + int ir_io; + int rc; + void *buffer; + + coredev->ir.input_dev = NULL; + ir_io = sms_get_board(smscore_get_board_id(coredev))->board_cfg.ir; + if (ir_io) {/* only if IR port exist we use IR sub-module */ + sms_info("IR loading"); + rc = sms_ir_init(coredev); + + if (rc != 0) + sms_err("Error initialization DTV IR sub-module"); + else { + buffer = kmalloc(sizeof(struct SmsMsgData_ST2) + + SMS_DMA_ALIGNMENT, + GFP_KERNEL | GFP_DMA); + if (buffer) { + struct SmsMsgData_ST2 *msg = + (struct SmsMsgData_ST2 *) + SMS_ALIGN_ADDRESS(buffer); + + SMS_INIT_MSG(&msg->xMsgHeader, + MSG_SMS_START_IR_REQ, + sizeof(struct SmsMsgData_ST2)); + msg->msgData[0] = coredev->ir.controller; + msg->msgData[1] = coredev->ir.timeout; + + smsendian_handle_tx_message( + (struct SmsMsgHdr_ST2 *)msg); + rc = smscore_sendrequest_and_wait(coredev, msg, + msg->xMsgHeader. msgLength, + &coredev->ir_init_done); + + kfree(buffer); + } else + sms_err + ("Sending IR initialization message failed"); + } + } else + sms_info("IR port has not been detected"); + + return 0; +} + /** * sets initial device mode and notifies client hotplugs that device is ready * @@ -423,6 +499,7 @@ int smscore_start_device(struct smscore_device_t *coredev) kmutex_lock(&g_smscore_deviceslock); rc = smscore_notify_callbacks(coredev, coredev->device, 1); + smscore_init_ir(coredev); sms_info("device %p started, rc %d", coredev, rc); @@ -432,29 +509,19 @@ int smscore_start_device(struct smscore_device_t *coredev) } EXPORT_SYMBOL_GPL(smscore_start_device); -static int smscore_sendrequest_and_wait(struct smscore_device_t *coredev, - void *buffer, size_t size, - struct completion *completion) -{ - int rc = coredev->sendrequest_handler(coredev->context, buffer, size); - if (rc < 0) { - sms_info("sendrequest returned error %d", rc); - return rc; - } - - return wait_for_completion_timeout(completion, - msecs_to_jiffies(10000)) ? - 0 : -ETIME; -} static int smscore_load_firmware_family2(struct smscore_device_t *coredev, void *buffer, size_t size) { struct SmsFirmware_ST *firmware = (struct SmsFirmware_ST *) buffer; struct SmsMsgHdr_ST *msg; - u32 mem_address = firmware->StartAddress; + u32 mem_address; u8 *payload = firmware->Payload; int rc = 0; + firmware->StartAddress = le32_to_cpu(firmware->StartAddress); + firmware->Length = le32_to_cpu(firmware->Length); + + mem_address = firmware->StartAddress; sms_info("loading FW to addr 0x%x size %d", mem_address, firmware->Length); @@ -621,6 +688,9 @@ void smscore_unregister_device(struct smscore_device_t *coredev) kmutex_lock(&g_smscore_deviceslock); + /* Release input device (IR) resources */ + sms_ir_exit(coredev); + smscore_notify_clients(coredev); smscore_notify_callbacks(coredev, NULL, 0); @@ -628,7 +698,9 @@ void smscore_unregister_device(struct smscore_device_t *coredev) * onresponse must no longer be called */ while (1) { - while ((cb = smscore_getbuffer(coredev))) { + while (!list_empty(&coredev->buffers)) { + cb = (struct smscore_buffer_t *) coredev->buffers.next; + list_del(&cb->entry); kfree(cb); num_buffers++; } @@ -649,8 +721,10 @@ void smscore_unregister_device(struct smscore_device_t *coredev) if (coredev->common_buffer) dma_free_coherent(NULL, coredev->common_buffer_size, - coredev->common_buffer, - coredev->common_buffer_phys); + coredev->common_buffer, coredev->common_buffer_phys); + + if (coredev->fw_buf != NULL) + kfree(coredev->fw_buf); list_del(&coredev->entry); kfree(coredev); @@ -710,7 +784,7 @@ static char *smscore_fw_lkup[][SMS_NUM_OF_DEVICE_TYPES] = { /*BDA*/ {"none", "dvb_nova_12mhz.inp", "dvb_nova_12mhz_b0.inp", "none"}, /*ISDBT*/ - {"none", "isdbt_nova_12mhz.inp", "dvb_nova_12mhz.inp", "none"}, + {"none", "isdbt_nova_12mhz.inp", "isdbt_nova_12mhz_b0.inp", "none"}, /*ISDBTBDA*/ {"none", "isdbt_nova_12mhz.inp", "isdbt_nova_12mhz_b0.inp", "none"}, /*CMMB*/ @@ -834,7 +908,7 @@ int smscore_set_device_mode(struct smscore_device_t *coredev, int mode) coredev->device_flags &= ~SMS_DEVICE_NOT_READY; } - if (rc != 0) + if (rc < 0) sms_err("return error code %d.", rc); return rc; } @@ -980,6 +1054,35 @@ void smscore_onresponse(struct smscore_device_t *coredev, case MSG_SMS_SLEEP_RESUME_COMP_IND: complete(&coredev->resume_done); break; + case MSG_SMS_GPIO_CONFIG_EX_RES: + sms_debug("MSG_SMS_GPIO_CONFIG_EX_RES"); + complete(&coredev->gpio_configuration_done); + break; + case MSG_SMS_GPIO_SET_LEVEL_RES: + sms_debug("MSG_SMS_GPIO_SET_LEVEL_RES"); + complete(&coredev->gpio_set_level_done); + break; + case MSG_SMS_GPIO_GET_LEVEL_RES: + { + u32 *msgdata = (u32 *) phdr; + coredev->gpio_get_res = msgdata[1]; + sms_debug("MSG_SMS_GPIO_GET_LEVEL_RES gpio level %d", + coredev->gpio_get_res); + complete(&coredev->gpio_get_level_done); + break; + } + case MSG_SMS_START_IR_RES: + complete(&coredev->ir_init_done); + break; + case MSG_SMS_IR_SAMPLES_IND: + sms_ir_event(coredev, + (const char *) + ((char *)phdr + + sizeof(struct SmsMsgHdr_ST)), + (int)phdr->msgLength + - sizeof(struct SmsMsgHdr_ST)); + break; + default: #if 0 sms_info("no client (%p) or error (%d), " @@ -1006,12 +1109,24 @@ struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev) struct smscore_buffer_t *cb = NULL; unsigned long flags; + DEFINE_WAIT(wait); + spin_lock_irqsave(&coredev->bufferslock, flags); - if (!list_empty(&coredev->buffers)) { - cb = (struct smscore_buffer_t *) coredev->buffers.next; - list_del(&cb->entry); - } + /* This function must return a valid buffer, since the buffer list is + * finite, we check that there is an available buffer, if not, we wait + * until such buffer become available. + */ + + prepare_to_wait(&coredev->buffer_mng_waitq, &wait, TASK_INTERRUPTIBLE); + + if (list_empty(&coredev->buffers)) + schedule(); + + finish_wait(&coredev->buffer_mng_waitq, &wait); + + cb = (struct smscore_buffer_t *) coredev->buffers.next; + list_del(&cb->entry); spin_unlock_irqrestore(&coredev->bufferslock, flags); @@ -1028,8 +1143,8 @@ EXPORT_SYMBOL_GPL(smscore_getbuffer); * */ void smscore_putbuffer(struct smscore_device_t *coredev, - struct smscore_buffer_t *cb) -{ + struct smscore_buffer_t *cb) { + wake_up_interruptible(&coredev->buffer_mng_waitq); list_add_locked(&cb->entry, &coredev->buffers, &coredev->bufferslock); } EXPORT_SYMBOL_GPL(smscore_putbuffer); @@ -1236,8 +1351,9 @@ static int smscore_map_common_buffer(struct smscore_device_t *coredev, } #endif +/* old GPIO managments implementation */ int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin, - struct smscore_gpio_config *pinconfig) + struct smscore_config_gpio *pinconfig) { struct { struct SmsMsgHdr_ST hdr; @@ -1306,110 +1422,254 @@ int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level) &msg, sizeof(msg)); } -static int __init smscore_module_init(void) -{ - int rc = 0; +/* new GPIO managment implementation */ +static int GetGpioPinParams(u32 PinNum, u32 *pTranslatedPinNum, + u32 *pGroupNum, u32 *pGroupCfg) { + + *pGroupCfg = 1; + + if (PinNum >= 0 && PinNum <= 1) { + *pTranslatedPinNum = 0; + *pGroupNum = 9; + *pGroupCfg = 2; + } else if (PinNum >= 2 && PinNum <= 6) { + *pTranslatedPinNum = 2; + *pGroupNum = 0; + *pGroupCfg = 2; + } else if (PinNum >= 7 && PinNum <= 11) { + *pTranslatedPinNum = 7; + *pGroupNum = 1; + } else if (PinNum >= 12 && PinNum <= 15) { + *pTranslatedPinNum = 12; + *pGroupNum = 2; + *pGroupCfg = 3; + } else if (PinNum == 16) { + *pTranslatedPinNum = 16; + *pGroupNum = 23; + } else if (PinNum >= 17 && PinNum <= 24) { + *pTranslatedPinNum = 17; + *pGroupNum = 3; + } else if (PinNum == 25) { + *pTranslatedPinNum = 25; + *pGroupNum = 6; + } else if (PinNum >= 26 && PinNum <= 28) { + *pTranslatedPinNum = 26; + *pGroupNum = 4; + } else if (PinNum == 29) { + *pTranslatedPinNum = 29; + *pGroupNum = 5; + *pGroupCfg = 2; + } else if (PinNum == 30) { + *pTranslatedPinNum = 30; + *pGroupNum = 8; + } else if (PinNum == 31) { + *pTranslatedPinNum = 31; + *pGroupNum = 17; + } else + return -1; - INIT_LIST_HEAD(&g_smscore_notifyees); - INIT_LIST_HEAD(&g_smscore_devices); - kmutex_init(&g_smscore_deviceslock); + *pGroupCfg <<= 24; - INIT_LIST_HEAD(&g_smscore_registry); - kmutex_init(&g_smscore_registrylock); + return 0; +} -#if 0 /* def SMS_CHAR_CLIENT */ - /* Char interface Register */ - rc = smschar_register(); - if (rc) { - sms_err("Error registering char device client.\n"); - goto smschar_error; - } -#endif +int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum, + struct smscore_gpio_config *pGpioConfig) { -#if 0 /* def SMS_DVB_CLIENT */ - /* DVB Register */ - rc = smsdvb_register(); - if (rc) { - sms_err("Error registering DVB client.\n"); - goto smsdvb_error; - } -#endif + u32 totalLen; + u32 TranslatedPinNum = 0; + u32 GroupNum = 0; + u32 ElectricChar; + u32 groupCfg; + void *buffer; + int rc; + + struct SetGpioMsg { + struct SmsMsgHdr_ST xMsgHeader; + u32 msgData[6]; + } *pMsg; + + + if (PinNum > MAX_GPIO_PIN_NUMBER) + return -EINVAL; -#if 0 /* def SMS_NET_CLIENT */ - /* DVB Register */ - rc = smsnet_register(); - if (rc) { - sms_err("Error registering Network client.\n"); - goto smsnet_error; + if (pGpioConfig == NULL) + return -EINVAL; + + totalLen = sizeof(struct SmsMsgHdr_ST) + (sizeof(u32) * 6); + + buffer = kmalloc(totalLen + SMS_DMA_ALIGNMENT, + GFP_KERNEL | GFP_DMA); + if (!buffer) + return -ENOMEM; + + pMsg = (struct SetGpioMsg *) SMS_ALIGN_ADDRESS(buffer); + + pMsg->xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID; + pMsg->xMsgHeader.msgDstId = HIF_TASK; + pMsg->xMsgHeader.msgFlags = 0; + pMsg->xMsgHeader.msgLength = (u16) totalLen; + pMsg->msgData[0] = PinNum; + + if (!(coredev->device_flags & SMS_DEVICE_FAMILY2)) { + pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_CONFIG_REQ; + if (GetGpioPinParams(PinNum, &TranslatedPinNum, &GroupNum, + &groupCfg) != 0) + return -EINVAL; + + pMsg->msgData[1] = TranslatedPinNum; + pMsg->msgData[2] = GroupNum; + ElectricChar = (pGpioConfig->PullUpDown) + | (pGpioConfig->InputCharacteristics << 2) + | (pGpioConfig->OutputSlewRate << 3) + | (pGpioConfig->OutputDriving << 4); + pMsg->msgData[3] = ElectricChar; + pMsg->msgData[4] = pGpioConfig->Direction; + pMsg->msgData[5] = groupCfg; + } else { + pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_CONFIG_EX_REQ; + pMsg->msgData[1] = pGpioConfig->PullUpDown; + pMsg->msgData[2] = pGpioConfig->OutputSlewRate; + pMsg->msgData[3] = pGpioConfig->OutputDriving; + pMsg->msgData[4] = pGpioConfig->Direction; + pMsg->msgData[5] = 0; } -#endif -#if 0 /* def SMS_USB_BUS_DRV */ - /* USB Register */ - rc = smsusb_register(); - if (rc) { - sms_err("Error registering USB bus driver.\n"); - goto sms_bus_drv_error; + smsendian_handle_tx_message((struct SmsMsgHdr_ST *)pMsg); + rc = smscore_sendrequest_and_wait(coredev, pMsg, totalLen, + &coredev->gpio_configuration_done); + + if (rc != 0) { + if (rc == -ETIME) + sms_err("smscore_gpio_configure timeout"); + else + sms_err("smscore_gpio_configure error"); } -#endif + kfree(buffer); + + return rc; +} + +int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 PinNum, + u8 NewLevel) { -#if 0 /* def SMS_SPI_BUS_DRV */ - /* USB Register */ - rc = smsspi_register(); - if (rc) { - sms_err("Error registering spi bus driver.\n"); - goto sms_bus_drv_error; + u32 totalLen; + int rc; + void *buffer; + + struct SetGpioMsg { + struct SmsMsgHdr_ST xMsgHeader; + u32 msgData[3]; /* keep it 3 ! */ + } *pMsg; + + if ((NewLevel > 1) || (PinNum > MAX_GPIO_PIN_NUMBER) || + (PinNum > MAX_GPIO_PIN_NUMBER)) + return -EINVAL; + + totalLen = sizeof(struct SmsMsgHdr_ST) + + (3 * sizeof(u32)); /* keep it 3 ! */ + + buffer = kmalloc(totalLen + SMS_DMA_ALIGNMENT, + GFP_KERNEL | GFP_DMA); + if (!buffer) + return -ENOMEM; + + pMsg = (struct SetGpioMsg *) SMS_ALIGN_ADDRESS(buffer); + + pMsg->xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID; + pMsg->xMsgHeader.msgDstId = HIF_TASK; + pMsg->xMsgHeader.msgFlags = 0; + pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_SET_LEVEL_REQ; + pMsg->xMsgHeader.msgLength = (u16) totalLen; + pMsg->msgData[0] = PinNum; + pMsg->msgData[1] = NewLevel; + + /* Send message to SMS */ + smsendian_handle_tx_message((struct SmsMsgHdr_ST *)pMsg); + rc = smscore_sendrequest_and_wait(coredev, pMsg, totalLen, + &coredev->gpio_set_level_done); + + if (rc != 0) { + if (rc == -ETIME) + sms_err("smscore_gpio_set_level timeout"); + else + sms_err("smscore_gpio_set_level error"); } -#endif + kfree(buffer); return rc; -#if 0 -sms_bus_drv_error: -#endif /* 0 */ -#if 0 /* def SMS_NET_CLIENT */ - smsnet_unregister(); -smsnet_error: -#endif -#if 0 /* def SMS_DVB_CLIENT */ - smsdvb_unregister(); -smsdvb_error: -#endif -#if 0 /* def SMS_CHAR_CLIENT */ - smschar_unregister(); -smschar_error: -#endif - sms_debug("rc %d", rc); +} + +int smscore_gpio_get_level(struct smscore_device_t *coredev, u8 PinNum, + u8 *level) { + + u32 totalLen; + int rc; + void *buffer; + + struct SetGpioMsg { + struct SmsMsgHdr_ST xMsgHeader; + u32 msgData[2]; + } *pMsg; + + + if (PinNum > MAX_GPIO_PIN_NUMBER) + return -EINVAL; + + totalLen = sizeof(struct SmsMsgHdr_ST) + (2 * sizeof(u32)); + + buffer = kmalloc(totalLen + SMS_DMA_ALIGNMENT, + GFP_KERNEL | GFP_DMA); + if (!buffer) + return -ENOMEM; + + pMsg = (struct SetGpioMsg *) SMS_ALIGN_ADDRESS(buffer); + + pMsg->xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID; + pMsg->xMsgHeader.msgDstId = HIF_TASK; + pMsg->xMsgHeader.msgFlags = 0; + pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_GET_LEVEL_REQ; + pMsg->xMsgHeader.msgLength = (u16) totalLen; + pMsg->msgData[0] = PinNum; + pMsg->msgData[1] = 0; + + /* Send message to SMS */ + smsendian_handle_tx_message((struct SmsMsgHdr_ST *)pMsg); + rc = smscore_sendrequest_and_wait(coredev, pMsg, totalLen, + &coredev->gpio_get_level_done); + + if (rc != 0) { + if (rc == -ETIME) + sms_err("smscore_gpio_get_level timeout"); + else + sms_err("smscore_gpio_get_level error"); + } + kfree(buffer); + + /* Its a race between other gpio_get_level() and the copy of the single + * global 'coredev->gpio_get_res' to the function's variable 'level' + */ + *level = coredev->gpio_get_res; return rc; } -static void __exit smscore_module_exit(void) +static int __init smscore_module_init(void) { -#if 0 /* def SMS_CHAR_CLIENT */ - /* Char interface UnRegister */ - smschar_unregister(); -#endif - -#if 0 /* def SMS_DVB_CLIENT */ - /* DVB UnRegister */ - smsdvb_unregister(); -#endif + int rc = 0; -#if 0 /* def SMS_NET_CLIENT */ - /* NET UnRegister */ - smsnet_unregister(); -#endif + INIT_LIST_HEAD(&g_smscore_notifyees); + INIT_LIST_HEAD(&g_smscore_devices); + kmutex_init(&g_smscore_deviceslock); -#if 0 /* def SMS_USB_BUS_DRV */ - /* Unregister USB */ - smsusb_unregister(); -#endif + INIT_LIST_HEAD(&g_smscore_registry); + kmutex_init(&g_smscore_registrylock); -#if 0 /* def SMS_SPI_BUS_DRV */ - /* Unregister SPI */ - smsspi_unregister(); -#endif + return rc; +} +static void __exit smscore_module_exit(void) +{ kmutex_lock(&g_smscore_deviceslock); while (!list_empty(&g_smscore_notifyees)) { struct smscore_device_notifyee_t *notifyee = diff --git a/linux/drivers/media/dvb/siano/smscoreapi.h b/linux/drivers/media/dvb/siano/smscoreapi.h index d98b4a749..bc4572de6 100644 --- a/linux/drivers/media/dvb/siano/smscoreapi.h +++ b/linux/drivers/media/dvb/siano/smscoreapi.h @@ -35,13 +35,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include <asm/page.h> #include "compat.h" -#define SMS_DVB3_SUBSYS -#ifdef SMS_DVB3_SUBSYS -#include "dmxdev.h" -#include "dvbdev.h" -#include "dvb_demux.h" -#include "dvb_frontend.h" -#endif +#include "smsir.h" #define kmutex_init(_p_) mutex_init(_p_) #define kmutex_lock(_p_) mutex_lock(_p_) @@ -175,7 +169,7 @@ struct smscore_device_t { u32 fw_buf_size; /* Infrared (IR) */ - /* struct ir_t ir; */ + struct ir_t ir; int led_state; }; @@ -556,7 +550,7 @@ struct SMSHOSTLIB_I2C_RES_ST { }; -struct smscore_gpio_config { +struct smscore_config_gpio { #define SMS_GPIO_DIRECTION_INPUT 0 #define SMS_GPIO_DIRECTION_OUTPUT 1 u8 direction; @@ -582,6 +576,47 @@ struct smscore_gpio_config { u8 outputdriving; }; +struct smscore_gpio_config { +#define SMS_GPIO_DIRECTION_INPUT 0 +#define SMS_GPIO_DIRECTION_OUTPUT 1 + u8 Direction; + +#define SMS_GPIO_PULL_UP_DOWN_NONE 0 +#define SMS_GPIO_PULL_UP_DOWN_PULLDOWN 1 +#define SMS_GPIO_PULL_UP_DOWN_PULLUP 2 +#define SMS_GPIO_PULL_UP_DOWN_KEEPER 3 + u8 PullUpDown; + +#define SMS_GPIO_INPUT_CHARACTERISTICS_NORMAL 0 +#define SMS_GPIO_INPUT_CHARACTERISTICS_SCHMITT 1 + u8 InputCharacteristics; + +#define SMS_GPIO_OUTPUT_SLEW_RATE_SLOW 1 /* 10xx */ +#define SMS_GPIO_OUTPUT_SLEW_RATE_FAST 0 /* 10xx */ + + +#define SMS_GPIO_OUTPUT_SLEW_RATE_0_45_V_NS 0 /* 11xx */ +#define SMS_GPIO_OUTPUT_SLEW_RATE_0_9_V_NS 1 /* 11xx */ +#define SMS_GPIO_OUTPUT_SLEW_RATE_1_7_V_NS 2 /* 11xx */ +#define SMS_GPIO_OUTPUT_SLEW_RATE_3_3_V_NS 3 /* 11xx */ + u8 OutputSlewRate; + +#define SMS_GPIO_OUTPUT_DRIVING_S_4mA 0 /* 10xx */ +#define SMS_GPIO_OUTPUT_DRIVING_S_8mA 1 /* 10xx */ +#define SMS_GPIO_OUTPUT_DRIVING_S_12mA 2 /* 10xx */ +#define SMS_GPIO_OUTPUT_DRIVING_S_16mA 3 /* 10xx */ + +#define SMS_GPIO_OUTPUT_DRIVING_1_5mA 0 /* 11xx */ +#define SMS_GPIO_OUTPUT_DRIVING_2_8mA 1 /* 11xx */ +#define SMS_GPIO_OUTPUT_DRIVING_4mA 2 /* 11xx */ +#define SMS_GPIO_OUTPUT_DRIVING_7mA 3 /* 11xx */ +#define SMS_GPIO_OUTPUT_DRIVING_10mA 4 /* 11xx */ +#define SMS_GPIO_OUTPUT_DRIVING_11mA 5 /* 11xx */ +#define SMS_GPIO_OUTPUT_DRIVING_14mA 6 /* 11xx */ +#define SMS_GPIO_OUTPUT_DRIVING_16mA 7 /* 11xx */ + u8 OutputDriving; +}; + extern void smscore_registry_setmode(char *devpath, int mode); extern int smscore_registry_getmode(char *devpath); @@ -610,7 +645,6 @@ extern int smsclient_sendrequest(struct smscore_client_t *client, extern void smscore_onresponse(struct smscore_device_t *coredev, struct smscore_buffer_t *cb); -#if 1 extern int smscore_get_common_buffer_size(struct smscore_device_t *coredev); extern int smscore_map_common_buffer(struct smscore_device_t *coredev, struct vm_area_struct *vma); @@ -618,17 +652,25 @@ extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char *filename); extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8 *ufwbuf, int size); -#endif extern struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev); extern void smscore_putbuffer(struct smscore_device_t *coredev, struct smscore_buffer_t *cb); +/* old GPIO managment */ int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin, - struct smscore_gpio_config *pinconfig); + struct smscore_config_gpio *pinconfig); int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level); +/* new GPIO managment */ +extern int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum, + struct smscore_gpio_config *pGpioConfig); +extern int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 PinNum, + u8 NewLevel); +extern int smscore_gpio_get_level(struct smscore_device_t *coredev, u8 PinNum, + u8 *level); + void smscore_set_board_id(struct smscore_device_t *core, int id); int smscore_get_board_id(struct smscore_device_t *core); diff --git a/linux/drivers/media/dvb/siano/smsdvb.c b/linux/drivers/media/dvb/siano/smsdvb.c index f43c7f543..f8856d9c8 100644 --- a/linux/drivers/media/dvb/siano/smsdvb.c +++ b/linux/drivers/media/dvb/siano/smsdvb.c @@ -22,6 +22,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include <linux/module.h> #include <linux/init.h> +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" + #include "smscoreapi.h" #include "smsendian.h" #include "sms-cards.h" @@ -61,6 +66,54 @@ MODULE_PARM_DESC(debug, "set debug level (info=1, adv=2 (or-able))"); /* Events that may come from DVB v3 adapter */ static void sms_board_dvb3_event(struct smsdvb_client_t *client, enum SMS_DVB3_EVENTS event) { + + struct smscore_device_t *coredev = client->coredev; + switch (event) { + case DVB3_EVENT_INIT: + sms_debug("DVB3_EVENT_INIT"); + sms_board_event(coredev, BOARD_EVENT_BIND); + break; + case DVB3_EVENT_SLEEP: + sms_debug("DVB3_EVENT_SLEEP"); + sms_board_event(coredev, BOARD_EVENT_POWER_SUSPEND); + break; + case DVB3_EVENT_HOTPLUG: + sms_debug("DVB3_EVENT_HOTPLUG"); + sms_board_event(coredev, BOARD_EVENT_POWER_INIT); + break; + case DVB3_EVENT_FE_LOCK: + if (client->event_fe_state != DVB3_EVENT_FE_LOCK) { + client->event_fe_state = DVB3_EVENT_FE_LOCK; + sms_debug("DVB3_EVENT_FE_LOCK"); + sms_board_event(coredev, BOARD_EVENT_FE_LOCK); + } + break; + case DVB3_EVENT_FE_UNLOCK: + if (client->event_fe_state != DVB3_EVENT_FE_UNLOCK) { + client->event_fe_state = DVB3_EVENT_FE_UNLOCK; + sms_debug("DVB3_EVENT_FE_UNLOCK"); + sms_board_event(coredev, BOARD_EVENT_FE_UNLOCK); + } + break; + case DVB3_EVENT_UNC_OK: + if (client->event_unc_state != DVB3_EVENT_UNC_OK) { + client->event_unc_state = DVB3_EVENT_UNC_OK; + sms_debug("DVB3_EVENT_UNC_OK"); + sms_board_event(coredev, BOARD_EVENT_MULTIPLEX_OK); + } + break; + case DVB3_EVENT_UNC_ERR: + if (client->event_unc_state != DVB3_EVENT_UNC_ERR) { + client->event_unc_state = DVB3_EVENT_UNC_ERR; + sms_debug("DVB3_EVENT_UNC_ERR"); + sms_board_event(coredev, BOARD_EVENT_MULTIPLEX_ERRORS); + } + break; + + default: + sms_err("Unknown dvb3 api event"); + break; + } } static int smsdvb_onresponse(void *context, struct smscore_buffer_t *cb) diff --git a/linux/drivers/media/dvb/siano/smsendian.h b/linux/drivers/media/dvb/siano/smsendian.h index 7fbedc6a6..1624d6fd3 100644 --- a/linux/drivers/media/dvb/siano/smsendian.h +++ b/linux/drivers/media/dvb/siano/smsendian.h @@ -24,9 +24,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include <asm/byteorder.h> -void smsendian_handle_tx_message(void *buffer); -void smsendian_handle_rx_message(void *buffer); -void smsendian_handle_message_header(void *msg); +extern void smsendian_handle_tx_message(void *buffer); +extern void smsendian_handle_rx_message(void *buffer); +extern void smsendian_handle_message_header(void *msg); #endif /* __SMS_ENDIAN_H__ */ diff --git a/linux/drivers/media/dvb/siano/smsir.c b/linux/drivers/media/dvb/siano/smsir.c index a5f302c58..ac876859c 100644 --- a/linux/drivers/media/dvb/siano/smsir.c +++ b/linux/drivers/media/dvb/siano/smsir.c @@ -99,7 +99,7 @@ static void sms_ir_rc5_event(struct smscore_device_t *coredev, bool toggle_changed; u16 keycode; - sms_info("IR RC5 word: address %d, command %d, toggle %d", + sms_log("IR RC5 word: address %d, command %d, toggle %d", addr, cmd, toggle); toggle_changed = ir_toggle != toggle; @@ -118,7 +118,7 @@ static void sms_ir_rc5_event(struct smscore_device_t *coredev, (keycode != KEY_VOLUMEUP && keycode != KEY_VOLUMEDOWN)) return; /* accept only repeated volume, reject other keys */ - sms_info("kernel input keycode (from ir) %d", keycode); + sms_log("kernel input keycode (from ir) %d", keycode); input_report_key(coredev->ir.input_dev, keycode, 1); input_sync(coredev->ir.input_dev); @@ -147,7 +147,7 @@ static u32 ir_rc5_decode(unsigned int code) break; case 3: /* dprintk(1, "ir-common: ir_rc5_decode(%x) bad code\n", org_code);*/ - sms_info("bad code"); + sms_log("bad code"); return 0; } } @@ -175,7 +175,7 @@ static void sms_rc5_parse_word(struct smscore_device_t *coredev) RC5_PUSH_BIT(rc5_word, (ir_word>>i)&1, j) rc5_word = ir_rc5_decode(rc5_word); - /* sms_info("temp = 0x%x, rc5_code = 0x%x", ir_word, rc5_word); */ + /* sms_log("temp = 0x%x, rc5_code = 0x%x", ir_word, rc5_word); */ sms_ir_rc5_event(coredev, RC5_TOGGLE(rc5_word), @@ -210,11 +210,11 @@ static void sms_rc5_accumulate_bits(struct smscore_device_t *coredev, if (ir_pos == RC5_WORD_LEN) sms_rc5_parse_word(coredev); else if (ir_pos) /* timeout within a word */ - sms_info("IR error parsing a word"); + sms_log("IR error parsing a word"); ir_pos = 0; ir_word = 0; - /* sms_info("timeout %d", time); */ + /* sms_log("timeout %d", time); */ break; } /* The time is within the range of this number of bits */ @@ -236,7 +236,7 @@ void sms_ir_event(struct smscore_device_t *coredev, const char *buf, int len) int count = len>>2; samples = (s32 *)buf; -/* sms_info("IR buffer received, length = %d", count);*/ +/* sms_log("IR buffer received, length = %d", count);*/ for (i = 0; i < count; i++) if (ir_protocol == IR_RC5) @@ -248,7 +248,7 @@ int sms_ir_init(struct smscore_device_t *coredev) { struct input_dev *input_dev; - sms_info("Allocating input device"); + sms_log("Allocating input device"); input_dev = input_allocate_device(); if (!input_dev) { sms_err("Not enough memory"); @@ -261,11 +261,11 @@ int sms_ir_init(struct smscore_device_t *coredev) coredev->ir.keyboard_layout_map = keyboard_layout_maps[coredev->ir.ir_kb_type]. keyboard_layout_map; - sms_info("IR remote keyboard type is %d", coredev->ir.ir_kb_type); + sms_log("IR remote keyboard type is %d", coredev->ir.ir_kb_type); coredev->ir.controller = 0; /* Todo: vega/nova SPI number */ coredev->ir.timeout = IR_DEFAULT_TIMEOUT; - sms_info("IR port %d, timeout %d ms", + sms_log("IR port %d, timeout %d ms", coredev->ir.controller, coredev->ir.timeout); snprintf(coredev->ir.name, @@ -274,13 +274,15 @@ int sms_ir_init(struct smscore_device_t *coredev) coredev->ir.ir_kb_type); input_dev->name = coredev->ir.name; input_dev->phys = coredev->ir.name; +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) input_dev->dev.parent = coredev->device; +#endif /* Key press events only */ input_dev->evbit[0] = BIT_MASK(EV_KEY); input_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0); - sms_info("Input device (IR) %s is set for key events", input_dev->name); + sms_log("Input device (IR) %s is set for key events", input_dev->name); if (input_register_device(input_dev)) { sms_err("Failed to register device"); @@ -296,6 +298,6 @@ void sms_ir_exit(struct smscore_device_t *coredev) if (coredev->ir.input_dev) input_unregister_device(coredev->ir.input_dev); - sms_info(""); + sms_log(""); } diff --git a/linux/drivers/media/dvb/siano/smssdio.c b/linux/drivers/media/dvb/siano/smssdio.c index 4f8fa59a9..dfaa49a53 100644 --- a/linux/drivers/media/dvb/siano/smssdio.c +++ b/linux/drivers/media/dvb/siano/smssdio.c @@ -332,7 +332,7 @@ static struct sdio_driver smssdio_driver = { /* Module functions */ /*******************************************************************/ -int smssdio_register(void) +int smssdio_module_init(void) { int ret = 0; @@ -344,11 +344,14 @@ int smssdio_register(void) return ret; } -void smssdio_unregister(void) +void smssdio_module_exit(void) { sdio_unregister_driver(&smssdio_driver); } +module_init(smssdio_module_init); +module_exit(smssdio_module_exit); + MODULE_DESCRIPTION("Siano SMS1xxx SDIO driver"); MODULE_AUTHOR("Pierre Ossman"); MODULE_LICENSE("GPL"); diff --git a/linux/drivers/media/dvb/siano/smsusb.c b/linux/drivers/media/dvb/siano/smsusb.c index 7f0246fdb..c31a52d3a 100644 --- a/linux/drivers/media/dvb/siano/smsusb.c +++ b/linux/drivers/media/dvb/siano/smsusb.c @@ -78,6 +78,7 @@ static void smsusb_onresponse(struct urb *urb, struct pt_regs *regs) if ((urb->actual_length > 0) && (urb->status == 0)) { struct SmsMsgHdr_ST *phdr = (struct SmsMsgHdr_ST *)surb->cb->p; + smsendian_handle_message_header(phdr); if (urb->actual_length >= phdr->msgLength) { surb->cb->size = phdr->msgLength; @@ -488,7 +489,6 @@ static int smsusb_resume(struct usb_interface *intf) } struct usb_device_id smsusb_id_table[] = { -#ifdef CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS { USB_DEVICE(0x187f, 0x0010), .driver_info = SMS1XXX_BOARD_SIANO_STELLAR }, { USB_DEVICE(0x187f, 0x0100), @@ -499,7 +499,6 @@ struct usb_device_id smsusb_id_table[] = { .driver_info = SMS1XXX_BOARD_SIANO_NOVA_B }, { USB_DEVICE(0x187f, 0x0300), .driver_info = SMS1XXX_BOARD_SIANO_VEGA }, -#endif { USB_DEVICE(0x2040, 0x1700), .driver_info = SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT }, { USB_DEVICE(0x2040, 0x1800), @@ -530,8 +529,13 @@ struct usb_device_id smsusb_id_table[] = { .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, { USB_DEVICE(0x2040, 0x5590), .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, - { } /* Terminating entry */ -}; + { USB_DEVICE(0x187f, 0x0202), + .driver_info = SMS1XXX_BOARD_SIANO_NICE }, + { USB_DEVICE(0x187f, 0x0301), + .driver_info = SMS1XXX_BOARD_SIANO_VENICE }, + { } /* Terminating entry */ + }; + MODULE_DEVICE_TABLE(usb, smsusb_id_table); static struct usb_driver smsusb_driver = { @@ -557,14 +561,14 @@ int smsusb_module_init(void) void smsusb_module_exit(void) { - sms_debug(""); /* Regular USB Cleanup */ usb_deregister(&smsusb_driver); + sms_info("end"); } module_init(smsusb_module_init); module_exit(smsusb_module_exit); -MODULE_DESCRIPTION("Driver for the Siano SMS1XXX USB dongle"); +MODULE_DESCRIPTION("Driver for the Siano SMS1xxx USB dongle"); MODULE_AUTHOR("Siano Mobile Silicon, INC. (uris@siano-ms.com)"); MODULE_LICENSE("GPL"); diff --git a/linux/drivers/media/radio/dsbr100.c b/linux/drivers/media/radio/dsbr100.c index bd13bef85..2bb867720 100644 --- a/linux/drivers/media/radio/dsbr100.c +++ b/linux/drivers/media/radio/dsbr100.c @@ -33,6 +33,10 @@ History: + Version 0.46: + Removed usb_dsbr100_open/close calls and radio->users counter. Also, + radio->muted changed to radio->status and suspend/resume calls updated. + Version 0.45: Converted to v4l2_device. @@ -101,8 +105,8 @@ */ #include <linux/version.h> /* for KERNEL_VERSION MACRO */ -#define DRIVER_VERSION "v0.45" -#define RADIO_VERSION KERNEL_VERSION(0, 4, 5) +#define DRIVER_VERSION "v0.46" +#define RADIO_VERSION KERNEL_VERSION(0, 4, 6) #define DRIVER_AUTHOR "Markus Demleitner <msdemlei@tucana.harvard.edu>" #define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver" @@ -122,13 +126,15 @@ devices, that would be 76 and 91. */ #define FREQ_MAX 108.0 #define FREQ_MUL 16000 +/* defines for radio->status */ +#define STARTED 0 +#define STOPPED 1 + #define videodev_to_radio(d) container_of(d, struct dsbr100_device, videodev) static int usb_dsbr100_probe(struct usb_interface *intf, const struct usb_device_id *id); static void usb_dsbr100_disconnect(struct usb_interface *intf); -static int usb_dsbr100_open(struct file *file); -static int usb_dsbr100_close(struct file *file); static int usb_dsbr100_suspend(struct usb_interface *intf, pm_message_t message); static int usb_dsbr100_resume(struct usb_interface *intf); @@ -146,9 +152,8 @@ struct dsbr100_device { struct mutex lock; /* buffer locking */ int curfreq; int stereo; - int users; int removed; - int muted; + int status; }; static struct usb_device_id usb_dsbr100_device_table [] = { @@ -204,7 +209,7 @@ static int dsbr100_start(struct dsbr100_device *radio) goto usb_control_msg_failed; } - radio->muted = 0; + radio->status = STARTED; mutex_unlock(&radio->lock); return (radio->transfer_buffer)[0]; @@ -247,7 +252,7 @@ static int dsbr100_stop(struct dsbr100_device *radio) goto usb_control_msg_failed; } - radio->muted = 1; + radio->status = STOPPED; mutex_unlock(&radio->lock); return (radio->transfer_buffer)[0]; @@ -261,12 +266,12 @@ usb_control_msg_failed: } /* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */ -static int dsbr100_setfreq(struct dsbr100_device *radio, int freq) +static int dsbr100_setfreq(struct dsbr100_device *radio) { int retval; int request; + int freq = (radio->curfreq / 16 * 80) / 1000 + 856; - freq = (freq / 16 * 80) / 1000 + 856; mutex_lock(&radio->lock); retval = usb_control_msg(radio->usbdev, @@ -434,7 +439,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, radio->curfreq = f->frequency; mutex_unlock(&radio->lock); - retval = dsbr100_setfreq(radio, radio->curfreq); + retval = dsbr100_setfreq(radio); if (retval < 0) dev_warn(&radio->usbdev->dev, "Set frequency failed\n"); return 0; @@ -476,7 +481,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: - ctrl->value = radio->muted; + ctrl->value = radio->status; return 0; } return -EINVAL; @@ -546,65 +551,27 @@ static int vidioc_s_audio(struct file *file, void *priv, return 0; } -static int usb_dsbr100_open(struct file *file) -{ - struct dsbr100_device *radio = video_drvdata(file); - int retval; - - lock_kernel(); - radio->users = 1; - radio->muted = 1; - - retval = dsbr100_start(radio); - if (retval < 0) { - dev_warn(&radio->usbdev->dev, - "Radio did not start up properly\n"); - radio->users = 0; - unlock_kernel(); - return -EIO; - } - - retval = dsbr100_setfreq(radio, radio->curfreq); - if (retval < 0) - dev_warn(&radio->usbdev->dev, - "set frequency failed\n"); - - unlock_kernel(); - return 0; -} - -static int usb_dsbr100_close(struct file *file) -{ - struct dsbr100_device *radio = video_drvdata(file); - int retval; - - if (!radio) - return -ENODEV; - - mutex_lock(&radio->lock); - radio->users = 0; - mutex_unlock(&radio->lock); - - if (!radio->removed) { - retval = dsbr100_stop(radio); - if (retval < 0) { - dev_warn(&radio->usbdev->dev, - "dsbr100_stop failed\n"); - } - - } - return 0; -} - /* Suspend device - stop device. */ static int usb_dsbr100_suspend(struct usb_interface *intf, pm_message_t message) { struct dsbr100_device *radio = usb_get_intfdata(intf); int retval; - retval = dsbr100_stop(radio); - if (retval < 0) - dev_warn(&intf->dev, "dsbr100_stop failed\n"); + if (radio->status == STARTED) { + retval = dsbr100_stop(radio); + if (retval < 0) + dev_warn(&intf->dev, "dsbr100_stop failed\n"); + + /* After dsbr100_stop() status set to STOPPED. + * If we want driver to start radio on resume + * we set status equal to STARTED. + * On resume we will check status and run radio if needed. + */ + + mutex_lock(&radio->lock); + radio->status = STARTED; + mutex_unlock(&radio->lock); + } dev_info(&intf->dev, "going into suspend..\n"); @@ -617,9 +584,11 @@ static int usb_dsbr100_resume(struct usb_interface *intf) struct dsbr100_device *radio = usb_get_intfdata(intf); int retval; - retval = dsbr100_start(radio); - if (retval < 0) - dev_warn(&intf->dev, "dsbr100_start failed\n"); + if (radio->status == STARTED) { + retval = dsbr100_start(radio); + if (retval < 0) + dev_warn(&intf->dev, "dsbr100_start failed\n"); + } dev_info(&intf->dev, "coming out of suspend..\n"); @@ -639,8 +608,6 @@ static void usb_dsbr100_video_device_release(struct video_device *videodev) /* File system interface */ static const struct v4l2_file_operations usb_dsbr100_fops = { .owner = THIS_MODULE, - .open = usb_dsbr100_open, - .release = usb_dsbr100_close, .ioctl = video_ioctl2, }; @@ -698,9 +665,9 @@ static int usb_dsbr100_probe(struct usb_interface *intf, mutex_init(&radio->lock); radio->removed = 0; - radio->users = 0; radio->usbdev = interface_to_usbdev(intf); radio->curfreq = FREQ_MIN * FREQ_MUL; + radio->status = STOPPED; video_set_drvdata(&radio->videodev, radio); diff --git a/linux/drivers/media/radio/radio-mr800.c b/linux/drivers/media/radio/radio-mr800.c index 93d5a7aa6..5ff444cee 100644 --- a/linux/drivers/media/radio/radio-mr800.c +++ b/linux/drivers/media/radio/radio-mr800.c @@ -64,6 +64,7 @@ #include <media/v4l2-ioctl.h> #include <linux/usb.h> #include <linux/version.h> /* for KERNEL_VERSION MACRO */ +#include <linux/mutex.h> #include "compat.h" /* driver and module definitions */ diff --git a/linux/drivers/media/radio/radio-tea5764.c b/linux/drivers/media/radio/radio-tea5764.c index 9194a70aa..83a5aff7b 100644 --- a/linux/drivers/media/radio/radio-tea5764.c +++ b/linux/drivers/media/radio/radio-tea5764.c @@ -326,7 +326,9 @@ static int vidioc_g_tuner(struct file *file, void *priv, v->rangehigh = FREQ_MAX * FREQ_MUL; v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; if (r->tunchk & TEA5764_TUNCHK_STEREO) - v->rxsubchans = V4L2_TUNER_SUB_STEREO; + v->rxsubchans = V4L2_TUNER_SUB_STEREO; + else + v->rxsubchans = V4L2_TUNER_SUB_MONO; v->audmode = tea5764_get_audout_mode(radio); v->signal = TEA5764_TUNCHK_LEVEL(r->tunchk) * 0xffff / 0xf; v->afc = TEA5764_TUNCHK_IFCNT(r->tunchk); diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig index 8de867d30..061e147f6 100644 --- a/linux/drivers/media/video/Kconfig +++ b/linux/drivers/media/video/Kconfig @@ -776,10 +776,14 @@ config VIDEO_MX1 ---help--- This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface +config MX3_VIDEO + bool + config VIDEO_MX3 tristate "i.MX3x Camera Sensor Interface driver" depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA select VIDEOBUF_DMA_CONTIG + select MX3_VIDEO ---help--- This is a v4l2 driver for the i.MX3x Camera Sensor Interface @@ -862,9 +866,13 @@ config USB_W9968CF module will be called w9968cf. config USB_OV511 - tristate "USB OV511 Camera support" + tristate "USB OV511 Camera support (DEPRECATED)" depends on VIDEO_V4L1 ---help--- + This driver is DEPRECATED please use the gspca ov519 module + instead. Note that for the ov511 / ov518 support of the gspca module + you need atleast version 0.6.0 of libv4l. + Say Y here if you want to connect this type of camera to your computer's USB port. See <file:Documentation/video4linux/ov511.txt> for more information and for a list of supported cameras. diff --git a/linux/drivers/media/video/Makefile b/linux/drivers/media/video/Makefile index f7d9a4c6f..7fb3add1b 100644 --- a/linux/drivers/media/video/Makefile +++ b/linux/drivers/media/video/Makefile @@ -12,6 +12,8 @@ omap2cam-objs := omap24xxcam.o omap24xxcam-dma.o videodev-objs := v4l2-dev.o v4l2-ioctl.o v4l2-device.o +# V4L2 core modules + obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-int-device.o ifeq ($(CONFIG_COMPAT),y) obj-$(CONFIG_VIDEO_DEV) += v4l2-compat-ioctl32.o @@ -23,21 +25,15 @@ ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y) obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o endif -obj-$(CONFIG_VIDEO_TUNER) += tuner.o +# All i2c modules must come first: -obj-$(CONFIG_VIDEO_BT848) += bt8xx/ -obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o +obj-$(CONFIG_VIDEO_TUNER) += tuner.o obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o obj-$(CONFIG_VIDEO_TDA9875) += tda9875.o - obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o obj-$(CONFIG_VIDEO_SAA5246A) += saa5246a.o obj-$(CONFIG_VIDEO_SAA5249) += saa5249.o -obj-$(CONFIG_VIDEO_CQCAM) += c-qcam.o -obj-$(CONFIG_VIDEO_BWQCAM) += bw-qcam.o -obj-$(CONFIG_VIDEO_W9966) += w9966.o - obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o obj-$(CONFIG_VIDEO_TEA6420) += tea6420.o @@ -56,11 +52,40 @@ obj-$(CONFIG_VIDEO_BT856) += bt856.o obj-$(CONFIG_VIDEO_BT866) += bt866.o obj-$(CONFIG_VIDEO_KS0127) += ks0127.o obj-$(CONFIG_VIDEO_THS7303) += ths7303.o +obj-$(CONFIG_VIDEO_VINO) += indycam.o +obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o +obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o +obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o +obj-$(CONFIG_VIDEO_CS5345) += cs5345.o +obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o +obj-$(CONFIG_VIDEO_M52790) += m52790.o +obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o +obj-$(CONFIG_VIDEO_WM8775) += wm8775.o +obj-$(CONFIG_VIDEO_WM8739) += wm8739.o +obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o +obj-$(CONFIG_VIDEO_CX25840) += cx25840/ +obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o +obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o +obj-$(CONFIG_VIDEO_OV7670) += ov7670.o +obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o +obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o -obj-$(CONFIG_VIDEO_ZORAN) += zoran/ +obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o +obj-$(CONFIG_SOC_CAMERA_MT9M111) += mt9m111.o +obj-$(CONFIG_SOC_CAMERA_MT9T031) += mt9t031.o +obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o +obj-$(CONFIG_SOC_CAMERA_OV772X) += ov772x.o +obj-$(CONFIG_SOC_CAMERA_TW9910) += tw9910.o + +# And now the v4l2 drivers: +obj-$(CONFIG_VIDEO_BT848) += bt8xx/ +obj-$(CONFIG_VIDEO_ZORAN) += zoran/ +obj-$(CONFIG_VIDEO_CQCAM) += c-qcam.o +obj-$(CONFIG_VIDEO_BWQCAM) += bw-qcam.o +obj-$(CONFIG_VIDEO_W9966) += w9966.o obj-$(CONFIG_VIDEO_PMS) += pms.o -obj-$(CONFIG_VIDEO_VINO) += vino.o indycam.o +obj-$(CONFIG_VIDEO_VINO) += vino.o obj-$(CONFIG_VIDEO_STRADIS) += stradis.o obj-$(CONFIG_VIDEO_CPIA) += cpia.o obj-$(CONFIG_VIDEO_CPIA_PP) += cpia_pp.o @@ -71,17 +96,7 @@ obj-$(CONFIG_VIDEO_CX88) += cx88/ obj-$(CONFIG_VIDEO_EM28XX) += em28xx/ obj-$(CONFIG_VIDEO_CX231XX) += cx231xx/ obj-$(CONFIG_VIDEO_USBVISION) += usbvision/ -obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o -obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/ -obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o -obj-$(CONFIG_VIDEO_CS5345) += cs5345.o -obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o -obj-$(CONFIG_VIDEO_M52790) += m52790.o -obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o -obj-$(CONFIG_VIDEO_WM8775) += wm8775.o -obj-$(CONFIG_VIDEO_WM8739) += wm8739.o -obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip/ obj-$(CONFIG_VIDEO_CPIA2) += cpia2/ obj-$(CONFIG_VIDEO_MXB) += mxb.o @@ -94,19 +109,12 @@ obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o obj-$(CONFIG_VIDEOBUF_VMALLOC) += videobuf-vmalloc.o obj-$(CONFIG_VIDEOBUF_DVB) += videobuf-dvb.o obj-$(CONFIG_VIDEO_BTCX) += btcx-risc.o -obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o -obj-$(CONFIG_VIDEO_CX25840) += cx25840/ -obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o -obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o -obj-$(CONFIG_VIDEO_OV7670) += ov7670.o - -obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o obj-$(CONFIG_USB_DABUSB) += dabusb.o obj-$(CONFIG_USB_OV511) += ov511.o @@ -138,13 +146,7 @@ obj-$(CONFIG_VIDEO_CX23885) += cx23885/ obj-$(CONFIG_VIDEO_OMAP2) += omap2cam.o obj-$(CONFIG_SOC_CAMERA) += soc_camera.o -obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o -obj-$(CONFIG_SOC_CAMERA_MT9M111) += mt9m111.o -obj-$(CONFIG_SOC_CAMERA_MT9T031) += mt9t031.o -obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o -obj-$(CONFIG_SOC_CAMERA_OV772X) += ov772x.o obj-$(CONFIG_SOC_CAMERA_PLATFORM) += soc_camera_platform.o -obj-$(CONFIG_SOC_CAMERA_TW9910) += tw9910.o # soc-camera host drivers have to be linked after camera drivers obj-$(CONFIG_VIDEO_MX1) += mx1_camera.o obj-$(CONFIG_VIDEO_MX3) += mx3_camera.o @@ -155,6 +157,8 @@ obj-$(CONFIG_VIDEO_AU0828) += au0828/ obj-$(CONFIG_USB_VIDEO_CLASS) += uvc/ +obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core EXTRA_CFLAGS += -Idrivers/media/dvb/frontends EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/linux/drivers/media/video/au0828/au0828-cards.c b/linux/drivers/media/video/au0828/au0828-cards.c index 053bbe8c8..830c4a933 100644 --- a/linux/drivers/media/video/au0828/au0828-cards.c +++ b/linux/drivers/media/video/au0828/au0828-cards.c @@ -136,9 +136,9 @@ int au0828_tuner_callback(void *priv, int component, int command, int arg) /* Tuner Reset Command from xc5000 */ /* Drive the tuner into reset and out */ au0828_clear(dev, REG_001, 2); - mdelay(200); + mdelay(10); au0828_set(dev, REG_001, 2); - mdelay(50); + mdelay(10); return 0; } else { printk(KERN_ERR diff --git a/linux/drivers/media/video/au0828/au0828-core.c b/linux/drivers/media/video/au0828/au0828-core.c index 4da5b7909..0e2f0eb1a 100644 --- a/linux/drivers/media/video/au0828/au0828-core.c +++ b/linux/drivers/media/video/au0828/au0828-core.c @@ -37,6 +37,11 @@ int au0828_debug; module_param_named(debug, au0828_debug, int, 0644); MODULE_PARM_DESC(debug, "enable debug messages"); +static unsigned int disable_usb_speed_check; +module_param(disable_usb_speed_check, int, 0444); +MODULE_PARM_DESC(disable_usb_speed_check, + "override min bandwidth requirement of 480M bps"); + #define _AU0828_BULKPIPE 0x03 #define _BULKPIPESIZE 0xffff @@ -182,6 +187,18 @@ static int au0828_usb_probe(struct usb_interface *interface, le16_to_cpu(usbdev->descriptor.idProduct), ifnum); + /* + * Make sure we have 480 Mbps of bandwidth, otherwise things like + * video stream wouldn't likely work, since 12 Mbps is generally + * not enough even for most Digital TV streams. + */ + if (usbdev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { + printk(KERN_ERR "au0828: Device initialization failed.\n"); + printk(KERN_ERR "au0828: Device must be connected to a " + "high-speed USB 2.0 port.\n"); + return -ENODEV; + } + dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev == NULL) { printk(KERN_ERR "%s() Unable to allocate memory\n", __func__); diff --git a/linux/drivers/media/video/au0828/au0828-video.c b/linux/drivers/media/video/au0828/au0828-video.c index 8bc0f0481..ef44aa831 100644 --- a/linux/drivers/media/video/au0828/au0828-video.c +++ b/linux/drivers/media/video/au0828/au0828-video.c @@ -834,6 +834,9 @@ static int au0828_v4l2_close(struct file *filp) au0828_uninit_isoc(dev); + /* Save some power by putting tuner to sleep */ + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby); + /* When close the device, set the usb intf0 into alt0 to free USB bandwidth */ ret = usb_set_interface(dev->usbdev, 0, 0); @@ -915,11 +918,6 @@ static int au0828_v4l2_mmap(struct file *filp, struct vm_area_struct *vma) rc = videobuf_mmap_mapper(&fh->vb_vidq, vma); - dprintk(2, "vma start=0x%08lx, size=%ld, ret=%d\n", - (unsigned long)vma->vm_start, - (unsigned long)vma->vm_end-(unsigned long)vma->vm_start, - rc); - return rc; } diff --git a/linux/drivers/media/video/bt8xx/bttv-driver.c b/linux/drivers/media/video/bt8xx/bttv-driver.c index 622807b54..27be1694b 100644 --- a/linux/drivers/media/video/bt8xx/bttv-driver.c +++ b/linux/drivers/media/video/bt8xx/bttv-driver.c @@ -3180,6 +3180,7 @@ static unsigned int bttv_poll(struct file *file, poll_table *wait) struct bttv_fh *fh = file->private_data; struct bttv_buffer *buf; enum v4l2_field field; + unsigned int rc = POLLERR; if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) { if (!check_alloc_btres(fh->btv,fh,RESOURCE_VBI)) @@ -3188,9 +3189,10 @@ static unsigned int bttv_poll(struct file *file, poll_table *wait) } if (check_btres(fh,RESOURCE_VIDEO_STREAM)) { + mutex_lock(&fh->cap.vb_lock); /* streaming capture */ if (list_empty(&fh->cap.stream)) - return POLLERR; + goto err; buf = list_entry(fh->cap.stream.next,struct bttv_buffer,vb.stream); } else { /* read() capture */ @@ -3219,11 +3221,12 @@ static unsigned int bttv_poll(struct file *file, poll_table *wait) poll_wait(file, &buf->vb.done, wait); if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR) - return POLLIN|POLLRDNORM; - return 0; + rc = POLLIN|POLLRDNORM; + else + rc = 0; err: mutex_unlock(&fh->cap.vb_lock); - return POLLERR; + return rc; } static int bttv_open(struct file *file) @@ -4198,7 +4201,6 @@ static struct video_device *vdev_init(struct bttv *btv, if (NULL == vfd) return NULL; *vfd = *template; - vfd->minor = -1; vfd->v4l2_dev = &btv->c.v4l2_dev; vfd->release = video_device_release; vfd->debug = bttv_debug; @@ -4666,7 +4668,7 @@ static int __init bttv_init_module(void) #endif if (gbuffers < 2 || gbuffers > VIDEO_MAX_FRAME) gbuffers = 2; - if (gbufsize < 0 || gbufsize > BTTV_MAX_FBUF) + if (gbufsize > BTTV_MAX_FBUF) gbufsize = BTTV_MAX_FBUF; gbufsize = (gbufsize + PAGE_SIZE - 1) & PAGE_MASK; if (bttv_verbose) diff --git a/linux/drivers/media/video/bt8xx/bttv-i2c.c b/linux/drivers/media/video/bt8xx/bttv-i2c.c index bf94551c3..4febaf881 100644 --- a/linux/drivers/media/video/bt8xx/bttv-i2c.c +++ b/linux/drivers/media/video/bt8xx/bttv-i2c.c @@ -405,6 +405,29 @@ int __devinit init_bttv_i2c(struct bttv *btv) } if (0 == btv->i2c_rc && i2c_scan) do_i2c_scan(btv->c.v4l2_dev.name, &btv->i2c_client); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) + + /* Instantiate the IR receiver device, if present */ + if (0 == btv->i2c_rc) { + struct i2c_board_info info; + /* The external IR receiver is at i2c address 0x34 (0x35 for + reads). Future Hauppauge cards will have an internal + receiver at 0x30 (0x31 for reads). In theory, both can be + fitted, and Hauppauge suggest an external overrides an + internal. + + That's why we probe 0x1a (~0x34) first. CB + */ + const unsigned short addr_list[] = { + 0x1a, 0x18, 0x4b, 0x64, 0x30, + I2C_CLIENT_END + }; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list); + } +#endif return btv->i2c_rc; } diff --git a/linux/drivers/media/video/cx18/cx18-av-core.c b/linux/drivers/media/video/cx18/cx18-av-core.c index 2b07b1563..536dedb23 100644 --- a/linux/drivers/media/video/cx18/cx18-av-core.c +++ b/linux/drivers/media/video/cx18/cx18-av-core.c @@ -277,8 +277,15 @@ void cx18_av_std_setup(struct cx18 *cx) struct cx18_av_state *state = &cx->av_state; struct v4l2_subdev *sd = &state->sd; v4l2_std_id std = state->std; + + /* + * Video ADC crystal clock to pixel clock SRC decimation ratio + * 28.636360 MHz/13.5 Mpps * 256 = 0x21f.07b + */ + const int src_decimation = 0x21f; + int hblank, hactive, burst, vblank, vactive, sc; - int vblank656, src_decimation; + int vblank656; int luma_lpf, uv_lpf, comb; u32 pll_int, pll_frac, pll_post; @@ -288,40 +295,96 @@ void cx18_av_std_setup(struct cx18 *cx) else cx18_av_write(cx, 0x49f, 0x14); + /* + * Note: At the end of a field, there are 3 sets of half line duration + * (double horizontal rate) pulses: + * + * 5 (625) or 6 (525) half-lines to blank for the vertical retrace + * 5 (625) or 6 (525) vertical sync pulses of half line duration + * 5 (625) or 6 (525) half-lines of equalization pulses + */ if (std & V4L2_STD_625_50) { - /* FIXME - revisit these for Sliced VBI */ + /* + * The following relationships of half line counts should hold: + * 625 = vblank656 + vactive + * 10 = vblank656 - vblank = vsync pulses + equalization pulses + * + * vblank656: half lines after line 625/mid-313 of blanked video + * vblank: half lines, after line 5/317, of blanked video + * vactive: half lines of active video + + * 5 half lines after the end of active video + * + * As far as I can tell: + * vblank656 starts counting from the falling edge of the first + * vsync pulse (start of line 1 or mid-313) + * vblank starts counting from the after the 5 vsync pulses and + * 5 or 4 equalization pulses (start of line 6 or 318) + * + * For 625 line systems the driver will extract VBI information + * from lines 6-23 and lines 318-335 (but the slicer can only + * handle 17 lines, not the 18 in the vblank region). + * In addition, we need vblank656 and vblank to be one whole + * line longer, to cover line 24 and 336, so the SAV/EAV RP + * codes get generated such that the encoder can actually + * extract line 23 & 335 (WSS). We'll lose 1 line in each field + * at the top of the screen. + * + * It appears the 5 half lines that happen after active + * video must be included in vactive (579 instead of 574), + * otherwise the colors get badly displayed in various regions + * of the screen. I guess the chroma comb filter gets confused + * without them (at least when a PVR-350 is the PAL source). + */ + vblank656 = 48; /* lines 1 - 24 & 313 - 336 */ + vblank = 38; /* lines 6 - 24 & 318 - 336 */ + vactive = 579; /* lines 24 - 313 & 337 - 626 */ + + /* + * For a 13.5 Mpps clock and 15,625 Hz line rate, a line is + * is 864 pixels = 720 active + 144 blanking. ITU-R BT.601 + * specifies 12 luma clock periods or ~ 0.9 * 13.5 Mpps after + * the end of active video to start a horizontal line, so that + * leaves 132 pixels of hblank to ignore. + */ hblank = 132; hactive = 720; - burst = 93; - vblank = 36; - vactive = 580; - vblank656 = 40; - src_decimation = 0x21f; + /* + * Burst gate delay (for 625 line systems) + * Hsync leading edge to color burst rise = 5.6 us + * Color burst width = 2.25 us + * Gate width = 4 pixel clocks + * (5.6 us + 2.25/2 us) * 13.5 Mpps + 4/2 clocks = 92.79 clocks + */ + burst = 93; luma_lpf = 2; if (std & V4L2_STD_PAL) { uv_lpf = 1; comb = 0x20; - sc = 688739; + /* sc = 4433618.75 * src_decimation/28636360 * 2^13 */ + sc = 688700; } else if (std == V4L2_STD_PAL_Nc) { uv_lpf = 1; comb = 0x20; - sc = 556453; + /* sc = 3582056.25 * src_decimation/28636360 * 2^13 */ + sc = 556422; } else { /* SECAM */ uv_lpf = 0; comb = 0; - sc = 672351; + /* (fr + fb)/2 = (4406260 + 4250000)/2 = 4328130 */ + /* sc = 4328130 * src_decimation/28636360 * 2^13 */ + sc = 672314; } } else { /* * The following relationships of half line counts should hold: - * 525 = vsync + vactive + vblank656 - * 12 = vblank656 - vblank + * 525 = prevsync + vblank656 + vactive + * 12 = vblank656 - vblank = vsync pulses + equalization pulses * - * vsync: always 6 half-lines of vsync pulses - * vactive: half lines of active video + * prevsync: 6 half-lines before the vsync pulses * vblank656: half lines, after line 3/mid-266, of blanked video * vblank: half lines, after line 9/272, of blanked video + * vactive: half lines of active video * * As far as I can tell: * vblank656 starts counting from the falling edge of the first @@ -348,20 +411,30 @@ void cx18_av_std_setup(struct cx18 *cx) luma_lpf = 1; uv_lpf = 1; - src_decimation = 0x21f; + /* + * Burst gate delay (for 525 line systems) + * Hsync leading edge to color burst rise = 5.3 us + * Color burst width = 2.5 us + * Gate width = 4 pixel clocks + * (5.3 us + 2.5/2 us) * 13.5 Mpps + 4/2 clocks = 90.425 clocks + */ if (std == V4L2_STD_PAL_60) { - burst = 0x5b; + burst = 90; luma_lpf = 2; comb = 0x20; - sc = 688739; + /* sc = 4433618.75 * src_decimation/28636360 * 2^13 */ + sc = 688700; } else if (std == V4L2_STD_PAL_M) { - burst = 0x61; + /* The 97 needs to be verified against PAL-M timings */ + burst = 97; comb = 0x20; - sc = 555452; + /* sc = 3575611.49 * src_decimation/28636360 * 2^13 */ + sc = 555421; } else { - burst = 0x5b; + burst = 90; comb = 0x66; - sc = 556063; + /* sc = 3579545.45.. * src_decimation/28636360 * 2^13 */ + sc = 556032; } } @@ -373,23 +446,26 @@ void cx18_av_std_setup(struct cx18 *cx) pll_int, pll_frac, pll_post); if (pll_post) { - int fin, fsc, pll; + int fsc, pll; + u64 tmp; pll = (28636360L * ((((u64)pll_int) << 25) + pll_frac)) >> 25; pll /= pll_post; - CX18_DEBUG_INFO_DEV(sd, "PLL = %d.%06d MHz\n", + CX18_DEBUG_INFO_DEV(sd, "Video PLL = %d.%06d MHz\n", pll / 1000000, pll % 1000000); - CX18_DEBUG_INFO_DEV(sd, "PLL/8 = %d.%06d MHz\n", + CX18_DEBUG_INFO_DEV(sd, "Pixel rate = %d.%06d Mpixel/sec\n", pll / 8000000, (pll / 8) % 1000000); - fin = ((u64)src_decimation * pll) >> 12; - CX18_DEBUG_INFO_DEV(sd, "ADC Sampling freq = %d.%06d MHz\n", - fin / 1000000, fin % 1000000); + CX18_DEBUG_INFO_DEV(sd, "ADC XTAL/pixel clock decimation ratio " + "= %d.%03d\n", src_decimation / 256, + ((src_decimation % 256) * 1000) / 256); - fsc = (((u64)sc) * pll) >> 24L; + tmp = 28636360 * (u64) sc; + do_div(tmp, src_decimation); + fsc = tmp >> 13; CX18_DEBUG_INFO_DEV(sd, - "Chroma sub-carrier freq = %d.%06d MHz\n", - fsc / 1000000, fsc % 1000000); + "Chroma sub-carrier initial freq = %d.%06d " + "MHz\n", fsc / 1000000, fsc % 1000000); CX18_DEBUG_INFO_DEV(sd, "hblank %i, hactive %i, vblank %i, " "vactive %i, vblank656 %i, src_dec %i, " @@ -954,9 +1030,9 @@ static int cx18_av_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) * cx18_av_std_setup(), above standard values: * * 480 + 1 for 60 Hz systems - * 576 + 4 for 50 Hz systems + * 576 + 3 for 50 Hz systems */ - Vlines = pix->height + (is_50Hz ? 4 : 1); + Vlines = pix->height + (is_50Hz ? 3 : 1); /* * Invalid height and width scaling requests are: diff --git a/linux/drivers/media/video/cx18/cx18-av-vbi.c b/linux/drivers/media/video/cx18/cx18-av-vbi.c index 23b31670b..a51732bcc 100644 --- a/linux/drivers/media/video/cx18/cx18-av-vbi.c +++ b/linux/drivers/media/video/cx18/cx18-av-vbi.c @@ -255,8 +255,8 @@ int cx18_av_vbi_s_fmt(struct cx18 *cx, struct v4l2_format *fmt) } cx18_av_write(cx, 0x43c, 0x16); - /* FIXME - should match vblank set in cx18_av_std_setup() */ - cx18_av_write(cx, 0x474, is_pal ? 0x2a : 26); + /* Should match vblank set in cx18_av_std_setup() */ + cx18_av_write(cx, 0x474, is_pal ? 38 : 26); return 0; } diff --git a/linux/drivers/media/video/cx18/cx18-cards.c b/linux/drivers/media/video/cx18/cx18-cards.c index 8c25ca8e3..fa755a982 100644 --- a/linux/drivers/media/video/cx18/cx18-cards.c +++ b/linux/drivers/media/video/cx18/cx18-cards.c @@ -351,13 +351,12 @@ static const struct cx18_card cx18_card_toshiba_qosmio_dvbt = { static const struct cx18_card_pci_info cx18_pci_leadtek_pvr2100[] = { { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6f27 }, /* PVR2100 */ - { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6690 }, /* DVR3100 H */ { 0, 0, 0 } }; static const struct cx18_card cx18_card_leadtek_pvr2100 = { .type = CX18_CARD_LEADTEK_PVR2100, - .name = "Leadtek WinFast PVR2100/DVR3100 H", + .name = "Leadtek WinFast PVR2100", .comment = "Experimenters and photos needed for device to work well.\n" "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", .v4l2_capabilities = CX18_CAP_ENCODER, @@ -376,15 +375,12 @@ static const struct cx18_card cx18_card_leadtek_pvr2100 = { { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 }, }, .tuners = { - /* XC3028 tuner */ + /* XC2028 tuner */ { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 }, .ddr = { - /* - * Pointer to proper DDR config values provided by - * Terry Wu <terrywu at leadtek.com.tw> - */ + /* Pointer to proper DDR config values provided by Terry Wu */ .chip_config = 0x303, .refresh = 0x3bb, .timing1 = 0x24220e83, @@ -403,6 +399,58 @@ static const struct cx18_card cx18_card_leadtek_pvr2100 = { /* ------------------------------------------------------------------------- */ +/* Leadtek WinFast DVR3100 H */ + +static const struct cx18_card_pci_info cx18_pci_leadtek_dvr3100h[] = { + { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_LEADTEK, 0x6690 }, /* DVR3100 H */ + { 0, 0, 0 } +}; + +static const struct cx18_card cx18_card_leadtek_dvr3100h = { + .type = CX18_CARD_LEADTEK_DVR3100H, + .name = "Leadtek WinFast DVR3100 H", + .comment = "Simultaneous DVB-T and Analog capture supported,\n" + "\texcept when capturing Analog from the antenna input.\n", + .v4l2_capabilities = CX18_CAP_ENCODER, + .hw_audio_ctrl = CX18_HW_418_AV, + .hw_muxer = CX18_HW_GPIO_MUX, + .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_MUX | + CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL, + .video_inputs = { + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, + { CX18_CARD_INPUT_SVIDEO1, 1, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE7 }, + }, + .audio_inputs = { + { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL1, 1 }, + }, + .tuners = { + /* XC3028 tuner */ + { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, + }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 }, + .ddr = { + /* Pointer to proper DDR config values provided by Terry Wu */ + .chip_config = 0x303, + .refresh = 0x3bb, + .timing1 = 0x24220e83, + .timing2 = 0x1f, + .tune_lane = 0, + .initial_emrs = 0x2, + }, + .gpio_init.initial_value = 0x6, + .gpio_init.direction = 0x7, + .gpio_audio_input = { .mask = 0x7, + .tuner = 0x6, .linein = 0x2, .radio = 0x2 }, + .xceive_pin = 1, + .pci_list = cx18_pci_leadtek_dvr3100h, + .i2c = &cx18_i2c_std, +}; + +/* ------------------------------------------------------------------------- */ + static const struct cx18_card *cx18_card_list[] = { &cx18_card_hvr1600_esmt, &cx18_card_hvr1600_samsung, @@ -411,6 +459,7 @@ static const struct cx18_card *cx18_card_list[] = { &cx18_card_cnxt_raptor_pal, &cx18_card_toshiba_qosmio_dvbt, &cx18_card_leadtek_pvr2100, + &cx18_card_leadtek_dvr3100h, }; const struct cx18_card *cx18_get_card(u16 index) diff --git a/linux/drivers/media/video/cx18/cx18-controls.c b/linux/drivers/media/video/cx18/cx18-controls.c index 8e35c3aed..5136df198 100644 --- a/linux/drivers/media/video/cx18/cx18-controls.c +++ b/linux/drivers/media/video/cx18/cx18-controls.c @@ -61,6 +61,8 @@ int cx18_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl) switch (qctrl->id) { /* Standard V4L2 controls */ + case V4L2_CID_USER_CLASS: + return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0); case V4L2_CID_BRIGHTNESS: case V4L2_CID_HUE: case V4L2_CID_SATURATION: diff --git a/linux/drivers/media/video/cx18/cx18-driver.c b/linux/drivers/media/video/cx18/cx18-driver.c index f42a97314..7ffdda49c 100644 --- a/linux/drivers/media/video/cx18/cx18-driver.c +++ b/linux/drivers/media/video/cx18/cx18-driver.c @@ -152,7 +152,8 @@ MODULE_PARM_DESC(cardtype, "\t\t\t 4 = Yuan MPC718\n" "\t\t\t 5 = Conexant Raptor PAL/SECAM\n" "\t\t\t 6 = Toshiba Qosmio DVB-T/Analog\n" - "\t\t\t 7 = Leadtek WinFast PVR2100/DVR3100 H\n" + "\t\t\t 7 = Leadtek WinFast PVR2100\n" + "\t\t\t 8 = Leadtek WinFast DVR3100 H\n" "\t\t\t 0 = Autodetect (default)\n" "\t\t\t-1 = Ignore this card\n\t\t"); MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60"); diff --git a/linux/drivers/media/video/cx18/cx18-driver.h b/linux/drivers/media/video/cx18/cx18-driver.h index f89b82367..c6a1e907f 100644 --- a/linux/drivers/media/video/cx18/cx18-driver.h +++ b/linux/drivers/media/video/cx18/cx18-driver.h @@ -80,8 +80,9 @@ #define CX18_CARD_YUAN_MPC718 3 /* Yuan MPC718 */ #define CX18_CARD_CNXT_RAPTOR_PAL 4 /* Conexant Raptor PAL */ #define CX18_CARD_TOSHIBA_QOSMIO_DVBT 5 /* Toshiba Qosmio Interal DVB-T/Analog*/ -#define CX18_CARD_LEADTEK_PVR2100 6 /* Leadtek WinFast PVR2100/DVR3100 H */ -#define CX18_CARD_LAST 6 +#define CX18_CARD_LEADTEK_PVR2100 6 /* Leadtek WinFast PVR2100 */ +#define CX18_CARD_LEADTEK_DVR3100H 7 /* Leadtek WinFast DVR3100 H */ +#define CX18_CARD_LAST 7 #define CX18_ENC_STREAM_TYPE_MPG 0 #define CX18_ENC_STREAM_TYPE_TS 1 diff --git a/linux/drivers/media/video/cx18/cx18-dvb.c b/linux/drivers/media/video/cx18/cx18-dvb.c index e7285a109..6ea3fe623 100644 --- a/linux/drivers/media/video/cx18/cx18-dvb.c +++ b/linux/drivers/media/video/cx18/cx18-dvb.c @@ -26,12 +26,17 @@ #include "cx18-queue.h" #include "cx18-streams.h" #include "cx18-cards.h" +#include "cx18-gpio.h" #include "s5h1409.h" #include "mxl5005s.h" +#include "zl10353.h" +#include "tuner-xc2028.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); #define CX18_REG_DMUX_NUM_PORT_0_CONTROL 0xd5a000 +#define CX18_CLOCK_ENABLE2 0xc71024 +#define CX18_DMUX_CLK_MASK 0x0080 static struct mxl5005s_config hauppauge_hvr1600_tuner = { .i2c_address = 0xC6 >> 1, @@ -58,7 +63,15 @@ static struct s5h1409_config hauppauge_hvr1600_config = { .inversion = S5H1409_INVERSION_OFF, .status_mode = S5H1409_DEMODLOCKING, .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK +}; +/* Information/confirmation of proper config values provided by Terry Wu */ +static struct zl10353_config leadtek_dvr3100h_demod = { + .demod_address = 0x1e >> 1, /* Datasheet suggested straps */ + .if2 = 45600, /* 4.560 MHz IF from the XC3028 */ + .parallel_ts = 1, /* Not a serial TS */ + .no_tuner = 1, /* XC3028 is not behind the gate */ + .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */ }; static int dvb_register(struct cx18_stream *stream); @@ -99,6 +112,7 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed) cx18_write_reg(cx, v, CX18_REG_DMUX_NUM_PORT_0_CONTROL); break; + case CX18_CARD_LEADTEK_DVR3100H: default: /* Assumption - Parallel transport - Signalling * undefined or default. @@ -268,8 +282,7 @@ void cx18_dvb_unregister(struct cx18_stream *stream) } /* All the DVB attach calls go here, this function get's modified - * for each new card. No other function in this file needs - * to change. + * for each new card. cx18_dvb_start_feed() will also need changes. */ static int dvb_register(struct cx18_stream *stream) { @@ -290,6 +303,29 @@ static int dvb_register(struct cx18_stream *stream) ret = 0; } break; + case CX18_CARD_LEADTEK_DVR3100H: + dvb->fe = dvb_attach(zl10353_attach, + &leadtek_dvr3100h_demod, + &cx->i2c_adap[1]); + if (dvb->fe != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &cx->i2c_adap[1], + .i2c_addr = 0xc2 >> 1, + .ctrl = NULL, + }; + static struct xc2028_ctrl ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + .type = XC2028_AUTO, + }; + + fe = dvb_attach(xc2028_attach, dvb->fe, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctrl); + } + break; default: /* No Digital Tv Support */ break; @@ -300,6 +336,8 @@ static int dvb_register(struct cx18_stream *stream) return -1; } + dvb->fe->callback = cx18_reset_tuner_gpio; + ret = dvb_register_frontend(&dvb->dvb_adapter, dvb->fe); if (ret < 0) { if (dvb->fe->ops.release) @@ -307,5 +345,16 @@ static int dvb_register(struct cx18_stream *stream) return ret; } + /* + * The firmware seems to enable the TS DMUX clock + * under various circumstances. However, since we know we + * might use it, let's just turn it on ourselves here. + */ + cx18_write_reg_expect(cx, + (CX18_DMUX_CLK_MASK << 16) | CX18_DMUX_CLK_MASK, + CX18_CLOCK_ENABLE2, + CX18_DMUX_CLK_MASK, + (CX18_DMUX_CLK_MASK << 16) | CX18_DMUX_CLK_MASK); + return ret; } diff --git a/linux/drivers/media/video/cx18/cx18-streams.c b/linux/drivers/media/video/cx18/cx18-streams.c index 142302ba5..c134927b3 100644 --- a/linux/drivers/media/video/cx18/cx18-streams.c +++ b/linux/drivers/media/video/cx18/cx18-streams.c @@ -376,9 +376,14 @@ static void cx18_vbi_setup(struct cx18_stream *s) * Tell the encoder to capture 21-4+1=18 lines per field, * since we want lines 10 through 21. * - * FIXME - revisit for 625/50 systems + * For 625/50 systems, according to the VIP 2 & BT.656 std: + * The EAV RP code's Field bit toggles on line 1, a few lines + * after the Vertcal Blank bit has already toggled. + * (We've actually set the digitizer so that the Field bit + * toggles on line 2.) Tell the encoder to capture 23-2+1=22 + * lines per field, since we want lines 6 through 23. */ - lines = cx->is_60hz ? (21 - 4 + 1) * 2 : 38; + lines = cx->is_60hz ? (21 - 4 + 1) * 2 : (23 - 2 + 1) * 2; } data[0] = s->handle; diff --git a/linux/drivers/media/video/cx231xx/cx231xx-avcore.c b/linux/drivers/media/video/cx231xx/cx231xx-avcore.c index 6a9464079..28f48f41f 100644 --- a/linux/drivers/media/video/cx231xx/cx231xx-avcore.c +++ b/linux/drivers/media/video/cx231xx/cx231xx-avcore.c @@ -1052,22 +1052,13 @@ int cx231xx_set_audio_decoder_input(struct cx231xx *dev, /* Set resolution of the video */ int cx231xx_resolution_set(struct cx231xx *dev) { - int width, height; - u32 hscale, vscale; - int status = 0; - - width = dev->width; - height = dev->height; - - get_scale(dev, width, height, &hscale, &vscale); - /* set horzontal scale */ - status = vid_blk_write_word(dev, HSCALE_CTRL, hscale); + int status = vid_blk_write_word(dev, HSCALE_CTRL, dev->hscale); + if (status) + return status; /* set vertical scale */ - status = vid_blk_write_word(dev, VSCALE_CTRL, vscale); - - return status; + return vid_blk_write_word(dev, VSCALE_CTRL, dev->vscale); } /****************************************************************************** @@ -2055,7 +2046,7 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type) int cx231xx_capture_start(struct cx231xx *dev, int start, u8 media_type) { - int rc; + int rc = -1; u32 ep_mask = -1; struct pcb_config *pcb_config; diff --git a/linux/drivers/media/video/cx231xx/cx231xx-cards.c b/linux/drivers/media/video/cx231xx/cx231xx-cards.c index af6169516..f388262bd 100644 --- a/linux/drivers/media/video/cx231xx/cx231xx-cards.c +++ b/linux/drivers/media/video/cx231xx/cx231xx-cards.c @@ -282,12 +282,25 @@ static void cx231xx_config_tuner(struct cx231xx *dev) } /* ----------------------------------------------------------------------- */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) void cx231xx_set_ir(struct cx231xx *dev, struct IR_i2c *ir) +#else +void cx231xx_register_i2c_ir(struct cx231xx *dev) +#endif { +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) if (disable_ir) { ir->get_key = NULL; +#else + if (disable_ir) +#endif return; +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) } +#else + + /* REVISIT: instantiate IR device */ +#endif /* detect & configure */ switch (dev->model) { diff --git a/linux/drivers/media/video/cx231xx/cx231xx-i2c.c b/linux/drivers/media/video/cx231xx/cx231xx-i2c.c index d196fe666..4525fab35 100644 --- a/linux/drivers/media/video/cx231xx/cx231xx-i2c.c +++ b/linux/drivers/media/video/cx231xx/cx231xx-i2c.c @@ -424,34 +424,6 @@ static u32 functionality(struct i2c_adapter *adap) return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C; } -/* - * attach_inform() - * gets called when a device attaches to the i2c bus - * does some basic configuration - */ -static int attach_inform(struct i2c_client *client) -{ - struct cx231xx_i2c *bus = i2c_get_adapdata(client->adapter); - struct cx231xx *dev = bus->dev; - - switch (client->addr << 1) { - case 0x8e: - { - struct IR_i2c *ir = i2c_get_clientdata(client); - dprintk1(1, "attach_inform: IR detected (%s).\n", - ir->phys); - cx231xx_set_ir(dev, ir); - break; - } - break; - - default: - break; - } - - return 0; -} - static struct i2c_algorithm cx231xx_algo = { .master_xfer = cx231xx_i2c_xfer, .functionality = functionality, @@ -465,7 +437,6 @@ static struct i2c_adapter cx231xx_adap_template = { .name = "cx231xx", .id = I2C_HW_B_CX231XX, .algo = &cx231xx_algo, - .client_register = attach_inform, }; static struct i2c_client cx231xx_client_template = { @@ -540,6 +511,11 @@ int cx231xx_i2c_register(struct cx231xx_i2c *bus) if (0 == bus->i2c_rc) { if (i2c_scan) cx231xx_do_i2c_scan(dev, &bus->i2c_client); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) + + /* Instantiate the IR receiver device, if present */ + cx231xx_register_i2c_ir(dev); +#endif } else cx231xx_warn("%s: i2c bus %d register FAILED\n", dev->name, bus->nr); diff --git a/linux/drivers/media/video/cx231xx/cx231xx-input.c b/linux/drivers/media/video/cx231xx/cx231xx-input.c index 04d954cca..3171b0177 100644 --- a/linux/drivers/media/video/cx231xx/cx231xx-input.c +++ b/linux/drivers/media/video/cx231xx/cx231xx-input.c @@ -37,7 +37,7 @@ MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]"); #define i2cdprintk(fmt, arg...) \ if (ir_debug) { \ - printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg); \ + printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \ } #define dprintk(fmt, arg...) \ diff --git a/linux/drivers/media/video/cx231xx/cx231xx-video.c b/linux/drivers/media/video/cx231xx/cx231xx-video.c index 638a8d3e4..e00edd0aa 100644 --- a/linux/drivers/media/video/cx231xx/cx231xx-video.c +++ b/linux/drivers/media/video/cx231xx/cx231xx-video.c @@ -893,9 +893,9 @@ static int check_dev(struct cx231xx *dev) return 0; } -void get_scale(struct cx231xx *dev, - unsigned int width, unsigned int height, - unsigned int *hscale, unsigned int *vscale) +static void get_scale(struct cx231xx *dev, + unsigned int width, unsigned int height, + unsigned int *hscale, unsigned int *vscale) { unsigned int maxw = norm_maxw(dev); unsigned int maxh = norm_maxh(dev); @@ -907,10 +907,6 @@ void get_scale(struct cx231xx *dev, *vscale = (((unsigned long)maxh) << 12) / height - 4096L; if (*vscale >= 0x4000) *vscale = 0x3fff; - - dev->hscale = *hscale; - dev->vscale = *vscale; - } /* ------------------------------------------------------------------ @@ -955,8 +951,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, { struct cx231xx_fh *fh = priv; struct cx231xx *dev = fh->dev; - int width = f->fmt.pix.width; - int height = f->fmt.pix.height; + unsigned int width = f->fmt.pix.width; + unsigned int height = f->fmt.pix.height; unsigned int maxw = norm_maxw(dev); unsigned int maxh = norm_maxh(dev); unsigned int hscale, vscale; @@ -971,17 +967,7 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, /* width must even because of the YUYV format height must be even because of interlacing */ - height &= 0xfffe; - width &= 0xfffe; - - if (unlikely(height < 32)) - height = 32; - if (unlikely(height > maxh)) - height = maxh; - if (unlikely(width < 48)) - width = 48; - if (unlikely(width > maxw)) - width = maxw; + v4l_bound_align_image(&width, 48, maxw, 1, &height, 32, maxh, 1, 0); get_scale(dev, width, height, &hscale, &vscale); diff --git a/linux/drivers/media/video/cx231xx/cx231xx.h b/linux/drivers/media/video/cx231xx/cx231xx.h index 21b4023dd..051ca21c1 100644 --- a/linux/drivers/media/video/cx231xx/cx231xx.h +++ b/linux/drivers/media/video/cx231xx/cx231xx.h @@ -731,9 +731,6 @@ int cx231xx_set_video_input_mux(struct cx231xx *dev, u8 input); int cx231xx_set_decoder_video_input(struct cx231xx *dev, u8 pin_type, u8 input); int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev); int cx231xx_set_audio_input(struct cx231xx *dev, u8 input); -void get_scale(struct cx231xx *dev, - unsigned int width, unsigned int height, - unsigned int *hscale, unsigned int *vscale); /* Provided by cx231xx-video.c */ int cx231xx_register_extension(struct cx231xx_ops *dev); @@ -747,7 +744,11 @@ extern void cx231xx_card_setup(struct cx231xx *dev); extern struct cx231xx_board cx231xx_boards[]; extern struct usb_device_id cx231xx_id_table[]; extern const unsigned int cx231xx_bcount; +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) void cx231xx_set_ir(struct cx231xx *dev, struct IR_i2c *ir); +#else +void cx231xx_register_i2c_ir(struct cx231xx *dev); +#endif int cx231xx_tuner_callback(void *ptr, int component, int command, int arg); /* Provided by cx231xx-input.c */ diff --git a/linux/drivers/media/video/cx2341x.c b/linux/drivers/media/video/cx2341x.c index 2cf0c5fee..8c468fc86 100644 --- a/linux/drivers/media/video/cx2341x.c +++ b/linux/drivers/media/video/cx2341x.c @@ -501,6 +501,8 @@ int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params, int err; switch (qctrl->id) { + case V4L2_CID_MPEG_CLASS: + return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0); case V4L2_CID_MPEG_STREAM_TYPE: return v4l2_ctrl_query_fill(qctrl, V4L2_MPEG_STREAM_TYPE_MPEG2_PS, diff --git a/linux/drivers/media/video/cx23885/cx23885-417.c b/linux/drivers/media/video/cx23885/cx23885-417.c index 574cdb385..9974d9a78 100644 --- a/linux/drivers/media/video/cx23885/cx23885-417.c +++ b/linux/drivers/media/video/cx23885/cx23885-417.c @@ -1749,7 +1749,6 @@ static struct video_device *cx23885_video_dev_alloc( if (NULL == vfd) return NULL; *vfd = *template; - vfd->minor = -1; snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)", dev->name, type, cx23885_boards[tsport->dev->board].name); vfd->parent = &pci->dev; diff --git a/linux/drivers/media/video/cx23885/cx23885-cards.c b/linux/drivers/media/video/cx23885/cx23885-cards.c index 93176fe4b..35b2abd6a 100644 --- a/linux/drivers/media/video/cx23885/cx23885-cards.c +++ b/linux/drivers/media/video/cx23885/cx23885-cards.c @@ -198,6 +198,10 @@ struct cx23885_board cx23885_boards[] = { .name = "Hauppauge WinTV-HVR1210", .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_MYGICA_X8506] = { + .name = "Mygica X8506 DMB-TH", + .portb = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -317,6 +321,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x0070, .subdevice = 0x2295, .card = CX23885_BOARD_HAUPPAUGE_HVR1210, + }, { + .subvendor = 0x14f1, + .subdevice = 0x8651, + .card = CX23885_BOARD_MYGICA_X8506, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -707,6 +715,15 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) mdelay(20); cx23885_gpio_set(dev, GPIO_9); break; + case CX23885_BOARD_MYGICA_X8506: + /* GPIO-1 reset XC5000 */ + /* GPIO-2 reset LGS8GL5 */ + cx_set(GP0_IO, 0x00060000); + cx_clear(GP0_IO, 0x00000006); + mdelay(100); + cx_set(GP0_IO, 0x00060006); + mdelay(100); + break; } } @@ -810,6 +827,11 @@ void cx23885_card_setup(struct cx23885_dev *dev) ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; + case CX23885_BOARD_MYGICA_X8506: + ts1->gen_ctrl_val = 0x5; /* Parallel */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; case CX23885_BOARD_HAUPPAUGE_HVR1250: case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c index 499beaf3d..71f196ec5 100644 --- a/linux/drivers/media/video/cx23885/cx23885-dvb.c +++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c @@ -46,10 +46,12 @@ #include "dibx000_common.h" #include "zl10353.h" #include "stv0900.h" +#include "stv0900_reg.h" #include "stv6110.h" #include "lnbh24.h" #include "cx24116.h" #include "cimax2.h" +#include "lgs8gxx.h" #include "netup-eeprom.h" #include "netup-init.h" #include "lgdt3305.h" @@ -380,13 +382,25 @@ static struct zl10353_config dvico_fusionhdtv_xc3028 = { .disable_i2c_gate_ctrl = 1, }; +static struct stv0900_reg stv0900_ts_regs[] = { + { R0900_TSGENERAL, 0x00 }, + { R0900_P1_TSSPEED, 0x40 }, + { R0900_P2_TSSPEED, 0x40 }, + { R0900_P1_TSCFGM, 0xc0 }, + { R0900_P2_TSCFGM, 0xc0 }, + { R0900_P1_TSCFGH, 0xe0 }, + { R0900_P2_TSCFGH, 0xe0 }, + { R0900_P1_TSCFGL, 0x20 }, + { R0900_P2_TSCFGL, 0x20 }, + { 0xffff, 0xff }, /* terminate */ +}; + static struct stv0900_config netup_stv0900_config = { .demod_address = 0x68, .xtal = 27000000, .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ .diseqc_mode = 2,/* 2/3 PWM */ - .path1_mode = 2,/*Serial continues clock */ - .path2_mode = 2,/*Serial continues clock */ + .ts_config_regs = stv0900_ts_regs, .tun1_maddress = 0,/* 0x60 */ .tun2_maddress = 3,/* 0x63 */ .tun1_adc = 1,/* 1 Vpp */ @@ -431,10 +445,29 @@ static struct cx24116_config dvbworld_cx24116_config = { .demod_address = 0x05, }; +static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = { + .prod = LGS8GXX_PROD_LGS8GL5, + .demod_address = 0x19, + .serial_ts = 0, + .ts_clk_pol = 1, + .ts_clk_gated = 1, + .if_clk_freq = 30400, /* 30.4 MHz */ + .if_freq = 5380, /* 5.38 MHz */ + .if_neg_center = 1, + .ext_adc = 0, + .adc_signed = 0, + .if_neg_edge = 0, +}; + +static struct xc5000_config mygica_x8506_xc5000_config = { + .i2c_address = 0x61, + .if_khz = 5380, +}; + static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; - struct cx23885_i2c *i2c_bus = NULL; + struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL; struct videobuf_dvb_frontend *fe0; int ret; @@ -727,7 +760,8 @@ static int dvb_register(struct cx23885_tsport *port) if (!dvb_attach(lnbh24_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, - LNBH24_PCL, 0, 0x09)) + LNBH24_PCL, + LNBH24_TTX, 0x09)) printk(KERN_ERR "No LNBH24 found!\n"); @@ -747,7 +781,8 @@ static int dvb_register(struct cx23885_tsport *port) if (!dvb_attach(lnbh24_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, - LNBH24_PCL, 0, 0x0a)) + LNBH24_PCL, + LNBH24_TTX, 0x0a)) printk(KERN_ERR "No LNBH24 found!\n"); @@ -756,6 +791,19 @@ static int dvb_register(struct cx23885_tsport *port) break; } break; + case CX23885_BOARD_MYGICA_X8506: + i2c_bus = &dev->i2c_bus[0]; + i2c_bus2 = &dev->i2c_bus[1]; + fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, + &mygica_x8506_lgs8gl5_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(xc5000_attach, + fe0->dvb.frontend, + &i2c_bus2->i2c_adap, + &mygica_x8506_xc5000_config); + } + break; default: printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " " isn't supported yet\n", diff --git a/linux/drivers/media/video/cx23885/cx23885-i2c.c b/linux/drivers/media/video/cx23885/cx23885-i2c.c index a5d9f7530..2e3f3d37c 100644 --- a/linux/drivers/media/video/cx23885/cx23885-i2c.c +++ b/linux/drivers/media/video/cx23885/cx23885-i2c.c @@ -364,6 +364,20 @@ int cx23885_i2c_register(struct cx23885_i2c *bus) printk(KERN_WARNING "%s: i2c bus %d register FAILED\n", dev->name, bus->nr); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) + /* Instantiate the IR receiver device, if present */ + if (0 == bus->i2c_rc) { + struct i2c_board_info info; + const unsigned short addr_list[] = { + 0x6b, I2C_CLIENT_END + }; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + i2c_new_probed_device(&bus->i2c_adap, &info, addr_list); + } + +#endif return bus->i2c_rc; } diff --git a/linux/drivers/media/video/cx23885/cx23885-video.c b/linux/drivers/media/video/cx23885/cx23885-video.c index 2855a49b5..2248e0216 100644 --- a/linux/drivers/media/video/cx23885/cx23885-video.c +++ b/linux/drivers/media/video/cx23885/cx23885-video.c @@ -865,6 +865,7 @@ static unsigned int video_poll(struct file *file, { struct cx23885_fh *fh = file->private_data; struct cx23885_buffer *buf; + unsigned int rc = POLLERR; if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) { if (!res_get(fh->dev, fh, RESOURCE_VBI)) @@ -872,23 +873,28 @@ static unsigned int video_poll(struct file *file, return videobuf_poll_stream(file, &fh->vbiq, wait); } + mutex_lock(&fh->vidq.vb_lock); if (res_check(fh, RESOURCE_VIDEO)) { /* streaming capture */ if (list_empty(&fh->vidq.stream)) - return POLLERR; + goto done; buf = list_entry(fh->vidq.stream.next, struct cx23885_buffer, vb.stream); } else { /* read() capture */ buf = (struct cx23885_buffer *)fh->vidq.read_buf; if (NULL == buf) - return POLLERR; + goto done; } poll_wait(file, &buf->vb.done, wait); if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR) - return POLLIN|POLLRDNORM; - return 0; + rc = POLLIN|POLLRDNORM; + else + rc = 0; +done: + mutex_unlock(&fh->vidq.vb_lock); + return rc; } static int video_release(struct file *file) @@ -1035,15 +1041,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, } f->fmt.pix.field = field; - if (f->fmt.pix.height < 32) - f->fmt.pix.height = 32; - if (f->fmt.pix.height > maxh) - f->fmt.pix.height = maxh; - if (f->fmt.pix.width < 48) - f->fmt.pix.width = 48; - if (f->fmt.pix.width > maxw) - f->fmt.pix.width = maxw; - f->fmt.pix.width &= ~0x03; + v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2, + &f->fmt.pix.height, 32, maxh, 0, 0); f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3; f->fmt.pix.sizeimage = diff --git a/linux/drivers/media/video/cx23885/cx23885.h b/linux/drivers/media/video/cx23885/cx23885.h index 8dba2fdd6..2022ed7de 100644 --- a/linux/drivers/media/video/cx23885/cx23885.h +++ b/linux/drivers/media/video/cx23885/cx23885.h @@ -76,6 +76,7 @@ #define CX23885_BOARD_HAUPPAUGE_HVR1275 19 #define CX23885_BOARD_HAUPPAUGE_HVR1255 20 #define CX23885_BOARD_HAUPPAUGE_HVR1210 21 +#define CX23885_BOARD_MYGICA_X8506 22 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 diff --git a/linux/drivers/media/video/cx88/cx88-alsa.c b/linux/drivers/media/video/cx88/cx88-alsa.c index 077c9f0d7..4b9f1bb22 100644 --- a/linux/drivers/media/video/cx88/cx88-alsa.c +++ b/linux/drivers/media/video/cx88/cx88-alsa.c @@ -939,7 +939,7 @@ static struct pci_driver cx88_audio_pci_driver = { .name = "cx88_audio", .id_table = cx88_audio_pci_tbl, .probe = cx88_audio_initdev, - .remove = cx88_audio_finidev, + .remove = __devexit_p(cx88_audio_finidev), }; /**************************************************************************** @@ -949,7 +949,7 @@ static struct pci_driver cx88_audio_pci_driver = { /* * module init */ -static int cx88_audio_init(void) +static int __init cx88_audio_init(void) { printk(KERN_INFO "cx2388x alsa driver version %d.%d.%d loaded\n", (CX88_VERSION_CODE >> 16) & 0xff, @@ -965,9 +965,8 @@ static int cx88_audio_init(void) /* * module remove */ -static void cx88_audio_fini(void) +static void __exit cx88_audio_fini(void) { - pci_unregister_driver(&cx88_audio_pci_driver); } diff --git a/linux/drivers/media/video/cx88/cx88-cards.c b/linux/drivers/media/video/cx88/cx88-cards.c index c9bfa835e..bf0f26c03 100644 --- a/linux/drivers/media/video/cx88/cx88-cards.c +++ b/linux/drivers/media/video/cx88/cx88-cards.c @@ -1557,33 +1557,45 @@ static const struct cx88_board cx88_boards[] = { }, .mpeg = CX88_MPEG_DVB, }, + /* Terry Wu <terrywu2009@gmail.com> */ + /* TV Audio : set GPIO 2, 18, 19 value to 0, 1, 0 */ + /* FM Audio : set GPIO 2, 18, 19 value to 0, 0, 0 */ + /* Line-in Audio : set GPIO 2, 18, 19 value to 0, 1, 1 */ + /* Mute Audio : set GPIO 2 value to 1 */ [CX88_BOARD_WINFAST_TV2000_XP_GLOBAL] = { - .name = "Winfast TV2000 XP Global", + .name = "Leadtek TV2000 XP Global", .tuner_type = TUNER_XC2028, .tuner_addr = 0x61, + .radio_type = TUNER_XC2028, + .radio_addr = 0x61, .input = { { .type = CX88_VMUX_TELEVISION, .vmux = 0, - .gpio0 = 0x0400, /* pin 2:mute = 0 (off?) */ + .gpio0 = 0x0400, /* pin 2 = 0 */ .gpio1 = 0x0000, - .gpio2 = 0x0800, /* pin 19:audio = 0 (tv) */ - + .gpio2 = 0x0C04, /* pin 18 = 1, pin 19 = 0 */ + .gpio3 = 0x0000, }, { .type = CX88_VMUX_COMPOSITE1, .vmux = 1, - .gpio0 = 0x0400, /* probably? or 0x0404 to turn mute on */ + .gpio0 = 0x0400, /* pin 2 = 0 */ .gpio1 = 0x0000, - .gpio2 = 0x0808, /* pin 19:audio = 1 (line) */ - + .gpio2 = 0x0C0C, /* pin 18 = 1, pin 19 = 1 */ + .gpio3 = 0x0000, }, { .type = CX88_VMUX_SVIDEO, .vmux = 2, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x0000, + .gpio2 = 0x0C0C, /* pin 18 = 1, pin 19 = 1 */ + .gpio3 = 0x0000, } }, .radio = { .type = CX88_RADIO, - .gpio0 = 0x004ff, - .gpio1 = 0x010ff, - .gpio2 = 0x0ff, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x0000, + .gpio2 = 0x0C00, /* pin 18 = 0, pin 19 = 0 */ + .gpio3 = 0x0000, }, }, [CX88_BOARD_POWERCOLOR_REAL_ANGEL] = { @@ -2009,6 +2021,47 @@ static const struct cx88_board cx88_boards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, + [CX88_BOARD_WINFAST_DTV1800H] = { + .name = "Leadtek WinFast DTV1800 Hybrid", + .tuner_type = TUNER_XC2028, + .radio_type = TUNER_XC2028, + .tuner_addr = 0x61, + .radio_addr = 0x61, + /* + * GPIO setting + * + * 2: mute (0=off,1=on) + * 12: tuner reset pin + * 13: audio source (0=tuner audio,1=line in) + * 14: FM (0=on,1=off ???) + */ + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6040, /* pin 13 = 0, pin 14 = 1 */ + .gpio2 = 0x0000, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6060, /* pin 13 = 1, pin 14 = 1 */ + .gpio2 = 0x0000, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6060, /* pin 13 = 1, pin 14 = 1 */ + .gpio2 = 0x0000, + } }, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6000, /* pin 13 = 0, pin 14 = 0 */ + .gpio2 = 0x0000, + }, + .mpeg = CX88_MPEG_DVB, + }, }; /* ------------------------------------------------------------------ */ @@ -2426,6 +2479,45 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = 0x0070, .subdevice = 0x9290, .card = CX88_BOARD_HAUPPAUGE_IRONLY, + }, { + .subvendor = 0x107d, + .subdevice = 0x6654, + .card = CX88_BOARD_WINFAST_DTV1800H, + }, { + /* PVR2000 PAL Model [107d:6630] */ + .subvendor = 0x107d, + .subdevice = 0x6630, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* PVR2000 PAL Model [107d:6638] */ + .subvendor = 0x107d, + .subdevice = 0x6638, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* PVR2000 NTSC Model [107d:6631] */ + .subvendor = 0x107d, + .subdevice = 0x6631, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* PVR2000 NTSC Model [107d:6637] */ + .subvendor = 0x107d, + .subdevice = 0x6637, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* PVR2000 NTSC Model [107d:663d] */ + .subvendor = 0x107d, + .subdevice = 0x663d, + .card = CX88_BOARD_LEADTEK_PVR2000, + }, { + /* DV2000 NTSC Model [107d:6621] */ + .subvendor = 0x107d, + .subdevice = 0x6621, + .card = CX88_BOARD_WINFAST_DV2000, + }, { + /* TV2000 XP Global [107d:6618] */ + .subvendor = 0x107d, + .subdevice = 0x6618, + .card = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL, }, }; @@ -2434,12 +2526,6 @@ static const struct cx88_subid cx88_subids[] = { static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data) { - /* This is just for the "Winfast 2000XP Expert" board ATM; I don't have data on - * any others. - * - * Byte 0 is 1 on the NTSC board. - */ - if (eeprom_data[4] != 0x7d || eeprom_data[5] != 0x10 || eeprom_data[7] != 0x66) { @@ -2447,8 +2533,19 @@ static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data) return; } - core->board.tuner_type = (eeprom_data[6] == 0x13) ? - TUNER_PHILIPS_FM1236_MK3 : TUNER_PHILIPS_FM1216ME_MK3; + /* Terry Wu <terrywu2009@gmail.com> */ + switch (eeprom_data[6]) { + case 0x13: /* SSID 6613 for TV2000 XP Expert NTSC Model */ + case 0x21: /* SSID 6621 for DV2000 NTSC Model */ + case 0x31: /* SSID 6631 for PVR2000 NTSC Model */ + case 0x37: /* SSID 6637 for PVR2000 NTSC Model */ + case 0x3d: /* SSID 6637 for PVR2000 NTSC Model */ + core->board.tuner_type = TUNER_PHILIPS_FM1236_MK3; + break; + default: + core->board.tuner_type = TUNER_PHILIPS_FM1216ME_MK3; + break; + } info_printk(core, "Leadtek Winfast 2000XP Expert config: " "tuner=%d, eeprom[0]=0x%02x\n", @@ -2624,6 +2721,23 @@ static int cx88_xc3028_geniatech_tuner_callback(struct cx88_core *core, return -EINVAL; } +static int cx88_xc3028_winfast1800h_callback(struct cx88_core *core, + int command, int arg) +{ + switch (command) { + case XC2028_TUNER_RESET: + /* GPIO 12 (xc3028 tuner reset) */ + cx_set(MO_GP1_IO, 0x1010); + mdelay(50); + cx_clear(MO_GP1_IO, 0x10); + mdelay(50); + cx_set(MO_GP1_IO, 0x10); + mdelay(50); + return 0; + } + return -EINVAL; +} + /* ------------------------------------------------------------------- */ /* some Divco specific stuff */ static int cx88_pv_8000gt_callback(struct cx88_core *core, @@ -2684,7 +2798,6 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core, { /* Board-specific callbacks */ switch (core->boardnr) { - case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: case CX88_BOARD_POWERCOLOR_REAL_ANGEL: case CX88_BOARD_GENIATECH_X8000_MT: case CX88_BOARD_KWORLD_ATSC_120: @@ -2696,6 +2809,9 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core, case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: return cx88_dvico_xc2028_callback(core, command, arg); + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: + case CX88_BOARD_WINFAST_DTV1800H: + return cx88_xc3028_winfast1800h_callback(core, command, arg); } switch (command) { @@ -2735,10 +2851,22 @@ static int cx88_xc5000_tuner_callback(struct cx88_core *core, switch (core->boardnr) { case CX88_BOARD_PINNACLE_PCTV_HD_800i: if (command == 0) { /* This is the reset command from xc5000 */ - /* Reset XC5000 tuner via SYS_RSTO_pin */ - cx_write(MO_SRST_IO, 0); - msleep(10); - cx_write(MO_SRST_IO, 1); + + /* djh - According to the engineer at PCTV Systems, + the xc5000 reset pin is supposed to be on GPIO12. + However, despite three nights of effort, pulling + that GPIO low didn't reset the xc5000. While + pulling MO_SRST_IO low does reset the xc5000, this + also resets in the s5h1409 being reset as well. + This causes tuning to always fail since the internal + state of the s5h1409 does not match the driver's + state. Given that the only two conditions in which + the driver performs a reset is during firmware load + and powering down the chip, I am taking out the + reset. We know that the chip is being reset + when the cx88 comes online, and not being able to + do power management for this board is worse than + not having any tuning at all. */ return 0; } else { err_printk(core, "xc5000: unknown tuner " @@ -2870,6 +2998,17 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core) cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */ udelay(1000); break; + + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: + case CX88_BOARD_WINFAST_DTV1800H: + /* GPIO 12 (xc3028 tuner reset) */ + cx_set(MO_GP1_IO, 0x1010); + mdelay(50); + cx_clear(MO_GP1_IO, 0x10); + mdelay(50); + cx_set(MO_GP1_IO, 0x10); + mdelay(50); + break; } } @@ -2890,12 +3029,14 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl) core->i2c_algo.udelay = 16; break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: + case CX88_BOARD_WINFAST_DTV1800H: ctl->demod = XC3028_FE_ZARLINK456; break; case CX88_BOARD_KWORLD_ATSC_120: case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: ctl->demod = XC3028_FE_OREN538; break; + case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: case CX88_BOARD_PROLINK_PV_8000GT: /* @@ -2939,6 +3080,8 @@ static void cx88_card_setup(struct cx88_core *core) if (0 == core->i2c_rc) gdi_eeprom(core, eeprom); break; + case CX88_BOARD_LEADTEK_PVR2000: + case CX88_BOARD_WINFAST_DV2000: case CX88_BOARD_WINFAST2000XP_EXPERT: if (0 == core->i2c_rc) leadtek_eeprom(core, eeprom); diff --git a/linux/drivers/media/video/cx88/cx88-core.c b/linux/drivers/media/video/cx88/cx88-core.c index 39cbd152a..fddba2d51 100644 --- a/linux/drivers/media/video/cx88/cx88-core.c +++ b/linux/drivers/media/video/cx88/cx88-core.c @@ -1057,7 +1057,6 @@ struct video_device *cx88_vdev_init(struct cx88_core *core, if (NULL == vfd) return NULL; *vfd = *template; - vfd->minor = -1; vfd->v4l2_dev = &core->v4l2_dev; vfd->parent = &pci->dev; vfd->release = video_device_release; diff --git a/linux/drivers/media/video/cx88/cx88-dvb.c b/linux/drivers/media/video/cx88/cx88-dvb.c index f32cece95..36f35f0b5 100644 --- a/linux/drivers/media/video/cx88/cx88-dvb.c +++ b/linux/drivers/media/video/cx88/cx88-dvb.c @@ -1021,6 +1021,7 @@ static int dvb_register(struct cx8802_dev *dev) } break; case CX88_BOARD_PINNACLE_HYBRID_PCTV: + case CX88_BOARD_WINFAST_DTV1800H: fe0->dvb.frontend = dvb_attach(zl10353_attach, &cx88_pinnacle_hybrid_pctv, &core->i2c_adap); diff --git a/linux/drivers/media/video/cx88/cx88-i2c.c b/linux/drivers/media/video/cx88/cx88-i2c.c index 680a8c889..b5833aa29 100644 --- a/linux/drivers/media/video/cx88/cx88-i2c.c +++ b/linux/drivers/media/video/cx88/cx88-i2c.c @@ -186,6 +186,21 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci) do_i2c_scan(core->name,&core->i2c_client); } else printk("%s: i2c register FAILED\n", core->name); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) + + /* Instantiate the IR receiver device, if present */ + if (0 == core->i2c_rc) { + struct i2c_board_info info; + const unsigned short addr_list[] = { + 0x18, 0x6b, 0x71, + I2C_CLIENT_END + }; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + i2c_new_probed_device(&core->i2c_adap, &info, addr_list); + } +#endif return core->i2c_rc; } diff --git a/linux/drivers/media/video/cx88/cx88-input.c b/linux/drivers/media/video/cx88/cx88-input.c index dad809335..7c5e94916 100644 --- a/linux/drivers/media/video/cx88/cx88-input.c +++ b/linux/drivers/media/video/cx88/cx88-input.c @@ -92,6 +92,7 @@ static void cx88_ir_handle_key(struct cx88_IR *ir) gpio=(gpio & 0x7fd) + (auxgpio & 0xef); break; case CX88_BOARD_WINFAST_DTV1000: + case CX88_BOARD_WINFAST_DTV1800H: case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: gpio = (gpio & 0x6ff) | ((cx_read(MO_GP1_IO) << 8) & 0x900); auxgpio = gpio; @@ -237,6 +238,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) ir->sampling = 1; break; case CX88_BOARD_WINFAST_DTV2000H: + case CX88_BOARD_WINFAST_DTV1800H: ir_codes = ir_codes_winfast; ir->gpio_addr = MO_GP0_IO; ir->mask_keycode = 0x8f8; diff --git a/linux/drivers/media/video/cx88/cx88-video.c b/linux/drivers/media/video/cx88/cx88-video.c index 88a326f61..a55053767 100644 --- a/linux/drivers/media/video/cx88/cx88-video.c +++ b/linux/drivers/media/video/cx88/cx88-video.c @@ -1095,6 +1095,7 @@ video_poll(struct file *file, struct poll_table_struct *wait) { struct cx8800_fh *fh = file->private_data; struct cx88_buffer *buf; + unsigned int rc = POLLERR; if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) { if (!res_get(fh->dev,fh,RESOURCE_VBI)) @@ -1102,22 +1103,27 @@ video_poll(struct file *file, struct poll_table_struct *wait) return videobuf_poll_stream(file, &fh->vbiq, wait); } + mutex_lock(&fh->vidq.vb_lock); if (res_check(fh,RESOURCE_VIDEO)) { /* streaming capture */ if (list_empty(&fh->vidq.stream)) - return POLLERR; + goto done; buf = list_entry(fh->vidq.stream.next,struct cx88_buffer,vb.stream); } else { /* read() capture */ buf = (struct cx88_buffer*)fh->vidq.read_buf; if (NULL == buf) - return POLLERR; + goto done; } poll_wait(file, &buf->vb.done, wait); if (buf->vb.state == VIDEOBUF_DONE || buf->vb.state == VIDEOBUF_ERROR) - return POLLIN|POLLRDNORM; - return 0; + rc = POLLIN|POLLRDNORM; + else + rc = 0; +done: + mutex_unlock(&fh->vidq.vb_lock); + return rc; } static int video_release(struct file *file) @@ -1152,8 +1158,10 @@ static int video_release(struct file *file) file->private_data = NULL; kfree(fh); + mutex_lock(&dev->core->lock); if(atomic_dec_and_test(&dev->core->users)) call_all(dev->core, tuner, s_standby); + mutex_unlock(&dev->core->lock); return 0; } @@ -1337,15 +1345,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, } f->fmt.pix.field = field; - if (f->fmt.pix.height < 32) - f->fmt.pix.height = 32; - if (f->fmt.pix.height > maxh) - f->fmt.pix.height = maxh; - if (f->fmt.pix.width < 48) - f->fmt.pix.width = 48; - if (f->fmt.pix.width > maxw) - f->fmt.pix.width = maxw; - f->fmt.pix.width &= ~0x03; + v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2, + &f->fmt.pix.height, 32, maxh, 0, 0); f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3; f->fmt.pix.sizeimage = diff --git a/linux/drivers/media/video/cx88/cx88.h b/linux/drivers/media/video/cx88/cx88.h index 0c00c34bc..59fc01a53 100644 --- a/linux/drivers/media/video/cx88/cx88.h +++ b/linux/drivers/media/video/cx88/cx88.h @@ -237,6 +237,7 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_PROF_6200 78 #define CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII 79 #define CX88_BOARD_HAUPPAUGE_IRONLY 80 +#define CX88_BOARD_WINFAST_DTV1800H 81 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, diff --git a/linux/drivers/media/video/em28xx/em28xx-audio.c b/linux/drivers/media/video/em28xx/em28xx-audio.c index 089764d42..66aace7cf 100644 --- a/linux/drivers/media/video/em28xx/em28xx-audio.c +++ b/linux/drivers/media/video/em28xx/em28xx-audio.c @@ -385,6 +385,11 @@ static int snd_em28xx_pcm_close(struct snd_pcm_substream *substream) mutex_lock(&dev->lock); dev->adev.users--; em28xx_audio_analog_set(dev); + if (substream->runtime->dma_area) { + dprintk("freeing\n"); + vfree(substream->runtime->dma_area); + substream->runtime->dma_area = NULL; + } mutex_unlock(&dev->lock); return 0; diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c index fb83e4f6e..b824eed46 100644 --- a/linux/drivers/media/video/em28xx/em28xx-cards.c +++ b/linux/drivers/media/video/em28xx/em28xx-cards.c @@ -50,6 +50,11 @@ static unsigned int disable_ir; module_param(disable_ir, int, 0444); MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); +static unsigned int disable_usb_speed_check; +module_param(disable_usb_speed_check, int, 0444); +MODULE_PARM_DESC(disable_usb_speed_check, + "override min bandwidth requirement of 480M bps"); + static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; module_param_array(card, int, NULL, 0444); MODULE_PARM_DESC(card, "card type"); @@ -117,6 +122,24 @@ static struct em28xx_reg_seq em2870_kworld_355u_digital[] = { }; #endif +/* Board - EM2882 Kworld 315U digital */ +static struct em28xx_reg_seq em2882_kworld_315u_digital[] = { + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM28XX_R08_GPIO, 0xfe, 0xff, 10}, + {EM2880_R04_GPO, 0x04, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 10}, + {EM28XX_R08_GPIO, 0x7e, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { + {EM2880_R04_GPO, 0x08, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 10}, + {EM2880_R04_GPO, 0x08, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 10}, + { -1, -1, -1, -1}, +}; + static struct em28xx_reg_seq kworld_330u_analog[] = { {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10}, {EM2880_R04_GPO, 0x00, 0xff, 10}, @@ -129,6 +152,24 @@ static struct em28xx_reg_seq kworld_330u_digital[] = { { -1, -1, -1, -1}, }; +/* Evga inDtube + GPIO0 - Enable digital power (s5h1409) - low to enable + GPIO1 - Enable analog power (tvp5150/emp202) - low to enable + GPIO4 - xc3028 reset + GOP3 - s5h1409 reset + */ +static struct em28xx_reg_seq evga_indtube_analog[] = { + {EM28XX_R08_GPIO, 0x79, 0xff, 60}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq evga_indtube_digital[] = { + {EM28XX_R08_GPIO, 0x7a, 0xff, 1}, + {EM2880_R04_GPO, 0x04, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 1}, + { -1, -1, -1, -1}, +}; + /* Callback for the most boards */ static struct em28xx_reg_seq default_tuner_gpio[] = { {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, @@ -153,6 +194,16 @@ static struct em28xx_reg_seq compro_mute_gpio[] = { { -1, -1, -1, -1}, }; +/* Terratec AV350 */ +static struct em28xx_reg_seq terratec_av350_mute_gpio[] = { + {EM28XX_R08_GPIO, 0xff, 0x7f, 10}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + { -1, -1, -1, -1}, +}; /* * Board definitions */ @@ -1033,16 +1084,17 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_LINE_IN, } }, }, - [EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA] = { - .name = "PointNix Intra-Oral Camera", + [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { + .name = "EM2860/SAA711X Reference Design", .has_snapshot_button = 1, - .tda9887_conf = TDA9887_PRESENT, .tuner_type = TUNER_ABSENT, .decoder = EM28XX_SAA711X, .input = { { .type = EM28XX_VMUX_SVIDEO, .vmux = SAA7115_SVIDEO3, - .amux = EM28XX_AMUX_VIDEO, + }, { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = SAA7115_COMPOSITE0, } }, }, [EM2880_BOARD_MSI_DIGIVOX_AD] = { @@ -1144,6 +1196,38 @@ struct em28xx_board em28xx_boards[] = { .gpio = default_analog, } }, }, + [EM2882_BOARD_KWORLD_ATSC_315U] = { + .name = "KWorld ATSC 315U HDTV TV Box", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .tuner_type = TUNER_THOMSON_DTT761X, + .tuner_gpio = em2882_kworld_315u_tuner_gpio, + .tda9887_conf = TDA9887_PRESENT, + .decoder = EM28XX_SAA711X, + .has_dvb = 1, + .dvb_gpio = em2882_kworld_315u_digital, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, + /* Analog mode - still not ready */ + /*.input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE2, + .amux = EM28XX_AMUX_VIDEO, + .gpio = em2882_kworld_315u_analog, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, + }, { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = em2882_kworld_315u_analog1, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = em2882_kworld_315u_analog1, + .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, + } }, */ + }, [EM2880_BOARD_EMPIRE_DUAL_TV] = { .name = "Empire dual TV", .tuner_type = TUNER_XC2028, @@ -1412,6 +1496,69 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_VIDEO, } }, }, + [EM2860_BOARD_TERRATEC_GRABBY] = { + .name = "Terratec Grabby", + .vchannels = 2, + .tuner_type = TUNER_ABSENT, + .decoder = EM28XX_SAA711X, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO2, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_VIDEO2, + } }, + }, + [EM2860_BOARD_TERRATEC_AV350] = { + .name = "Terratec AV350", + .vchannels = 2, + .tuner_type = TUNER_ABSENT, + .decoder = EM28XX_TVP5150, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, + .mute_gpio = terratec_av350_mute_gpio, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AUDIO_SRC_LINE, + .gpio = terratec_av350_unmute_gpio, + + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AUDIO_SRC_LINE, + .gpio = terratec_av350_unmute_gpio, + } }, + }, + [EM2882_BOARD_EVGA_INDTUBE] = { + .name = "Evga inDtube", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = evga_indtube_digital, + .ir_codes = ir_codes_evga_indtube, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = evga_indtube_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = evga_indtube_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = evga_indtube_analog, + } }, + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -1449,6 +1596,8 @@ struct usb_device_id em28xx_id_table[] = { { USB_DEVICE(0xeb1a, 0xe310), .driver_info = EM2880_BOARD_KWORLD_DVB_310U }, #endif + { USB_DEVICE(0xeb1a, 0xa313), + .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, { USB_DEVICE(0xeb1a, 0xa316), .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, { USB_DEVICE(0xeb1a, 0xe320), @@ -1479,6 +1628,10 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2870_BOARD_TERRATEC_XS }, { USB_DEVICE(0x0ccd, 0x0047), .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS }, + { USB_DEVICE(0x0ccd, 0x0084), + .driver_info = EM2860_BOARD_TERRATEC_AV350 }, + { USB_DEVICE(0x0ccd, 0x0096), + .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, { USB_DEVICE(0x185b, 0x2870), .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, { USB_DEVICE(0x185b, 0x2041), @@ -1532,13 +1685,14 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = { {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, {0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, + {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, }; /* I2C devicelist hash table for devices with generic USB IDs */ static struct em28xx_hash_table em28xx_i2c_hash[] = { {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, - {0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT}, + {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, }; @@ -1714,6 +1868,17 @@ void em28xx_pre_card_setup(struct em28xx *dev) em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); break; + case EM2882_BOARD_KWORLD_ATSC_315U: + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff); + msleep(10); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); + msleep(10); + em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); + msleep(10); + em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); + msleep(10); + break; + case EM2860_BOARD_KAIOMY_TVNPC_U2: em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); @@ -1784,6 +1949,10 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) ctl->demod = XC3028_FE_CHINA; ctl->fname = XC2028_DEFAULT_FIRMWARE; break; + case EM2882_BOARD_EVGA_INDTUBE: + ctl->demod = XC3028_FE_CHINA; + ctl->fname = XC3028L_DEFAULT_FIRMWARE; + break; default: ctl->demod = XC3028_FE_OREN538; } @@ -1931,12 +2100,31 @@ static int em28xx_hint_board(struct em28xx *dev) } /* ----------------------------------------------------------------------- */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir) +#else +void em28xx_register_i2c_ir(struct em28xx *dev) +#endif { +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) if (disable_ir) { ir->get_key = NULL; return ; } +#else + struct i2c_board_info info; + struct IR_i2c_init_data init_data; + const unsigned short addr_list[] = { + 0x30, 0x47, I2C_CLIENT_END + }; + + if (disable_ir) + return; + + memset(&info, 0, sizeof(struct i2c_board_info)); + memset(&init_data, 0, sizeof(struct IR_i2c_init_data)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); +#endif /* detect & configure */ switch (dev->model) { @@ -1946,22 +2134,40 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir) break; case (EM2800_BOARD_TERRATEC_CINERGY_200): case (EM2820_BOARD_TERRATEC_CINERGY_250): +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) ir->ir_codes = ir_codes_em_terratec; ir->get_key = em28xx_get_key_terratec; - snprintf(ir->c.name, sizeof(ir->c.name), + snprintf(ir->name, sizeof(ir->name), "i2c IR (EM28XX Terratec)"); +#else + init_data.ir_codes = ir_codes_em_terratec; + init_data.get_key = em28xx_get_key_terratec; + init_data.name = "i2c IR (EM28XX Terratec)"; +#endif break; case (EM2820_BOARD_PINNACLE_USB_2): +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) ir->ir_codes = ir_codes_pinnacle_grey; ir->get_key = em28xx_get_key_pinnacle_usb_grey; - snprintf(ir->c.name, sizeof(ir->c.name), + snprintf(ir->name, sizeof(ir->name), "i2c IR (EM28XX Pinnacle PCTV)"); +#else + init_data.ir_codes = ir_codes_pinnacle_grey; + init_data.get_key = em28xx_get_key_pinnacle_usb_grey; + init_data.name = "i2c IR (EM28XX Pinnacle PCTV)"; +#endif break; case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2): +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) ir->ir_codes = ir_codes_hauppauge_new; ir->get_key = em28xx_get_key_em_haup; - snprintf(ir->c.name, sizeof(ir->c.name), + snprintf(ir->name, sizeof(ir->name), "i2c IR (EM2840 Hauppauge)"); +#else + init_data.ir_codes = ir_codes_hauppauge_new; + init_data.get_key = em28xx_get_key_em_haup; + init_data.name = "i2c IR (EM2840 Hauppauge)"; +#endif break; case (EM2820_BOARD_MSI_VOX_USB_2): break; @@ -1972,6 +2178,12 @@ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir) case (EM2800_BOARD_GRABBEEX_USB2800): break; } +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) + + if (init_data.name) + info.platform_data = &init_data; + i2c_new_probed_device(&dev->i2c_adap, &info, addr_list); +#endif } void em28xx_card_setup(struct em28xx *dev) @@ -1982,6 +2194,9 @@ void em28xx_card_setup(struct em28xx *dev) if (em28xx_boards[dev->model].tuner_addr) dev->tuner_addr = em28xx_boards[dev->model].tuner_addr; + if (em28xx_boards[dev->model].tda9887_conf) + dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf; + /* request some modules */ switch (dev->model) { case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: @@ -2011,6 +2226,12 @@ void em28xx_card_setup(struct em28xx *dev) #endif break; } + case EM2882_BOARD_KWORLD_ATSC_315U: + em28xx_write_reg(dev, 0x0d, 0x42); + msleep(10); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); + msleep(10); + break; case EM2820_BOARD_KWORLD_PVRTV2800RF: /* GPIO enables sound on KWORLD PVR TV 2800RF */ em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9); @@ -2033,6 +2254,12 @@ void em28xx_card_setup(struct em28xx *dev) case EM2880_BOARD_MSI_DIGIVOX_AD: if (!em28xx_hint_board(dev)) em28xx_set_model(dev); + + /* In cases where we had to use a board hint, the call to + em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, + so make the call now so the analog GPIOs are set properly + before probing the i2c bus. */ + em28xx_set_mode(dev, EM28XX_ANALOG_MODE); break; } @@ -2389,6 +2616,20 @@ static int em28xx_usb_probe(struct usb_interface *interface, ifnum, interface->altsetting->desc.bInterfaceNumber); + /* + * Make sure we have 480 Mbps of bandwidth, otherwise things like + * video stream wouldn't likely work, since 12 Mbps is generally + * not enough even for most Digital TV streams. + */ + if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { + printk(DRIVER_NAME ": Device initialization failed.\n"); + printk(DRIVER_NAME ": Device must be connected to a high-speed" + " USB 2.0 port.\n"); + em28xx_devused &= ~(1<<nr); + retval = -ENODEV; + goto err; + } + if (nr >= EM28XX_MAXBOARDS) { printk(DRIVER_NAME ": Supports only %i em28xx boards.\n", EM28XX_MAXBOARDS); diff --git a/linux/drivers/media/video/em28xx/em28xx-core.c b/linux/drivers/media/video/em28xx/em28xx-core.c index 401dc4e39..2bce72e4f 100644 --- a/linux/drivers/media/video/em28xx/em28xx-core.c +++ b/linux/drivers/media/video/em28xx/em28xx-core.c @@ -500,18 +500,21 @@ int em28xx_audio_setup(struct em28xx *dev) /* See how this device is configured */ cfg = em28xx_read_reg(dev, EM28XX_R00_CHIPCFG); - if (cfg < 0) + em28xx_info("Config register raw data: 0x%02x\n", cfg); + if (cfg < 0) { + /* Register read error? */ cfg = EM28XX_CHIPCFG_AC97; /* Be conservative */ - else - em28xx_info("Config register raw data: 0x%02x\n", cfg); - - if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == - EM28XX_CHIPCFG_I2S_3_SAMPRATES) { + } else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == 0x00) { + /* The device doesn't have vendor audio at all */ + dev->has_alsa_audio = 0; + dev->audio_mode.has_audio = 0; + return 0; + } else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == + EM28XX_CHIPCFG_I2S_3_SAMPRATES) { em28xx_info("I2S Audio (3 sample rates)\n"); dev->audio_mode.i2s_3rates = 1; - } - if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == - EM28XX_CHIPCFG_I2S_5_SAMPRATES) { + } else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == + EM28XX_CHIPCFG_I2S_5_SAMPRATES) { em28xx_info("I2S Audio (5 sample rates)\n"); dev->audio_mode.i2s_5rates = 1; } @@ -1021,6 +1024,41 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets, } EXPORT_SYMBOL_GPL(em28xx_init_isoc); +/* Determine the packet size for the DVB stream for the given device + (underlying value programmed into the eeprom) */ +int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev) +{ + unsigned int chip_cfg2; + unsigned int packet_size = 564; + + if (dev->chip_id == CHIP_ID_EM2874) { + /* FIXME - for now assume 564 like it was before, but the + em2874 code should be added to return the proper value... */ + packet_size = 564; + } else { + /* TS max packet size stored in bits 1-0 of R01 */ + chip_cfg2 = em28xx_read_reg(dev, EM28XX_R01_CHIPCFG2); + switch (chip_cfg2 & EM28XX_CHIPCFG2_TS_PACKETSIZE_MASK) { + case EM28XX_CHIPCFG2_TS_PACKETSIZE_188: + packet_size = 188; + break; + case EM28XX_CHIPCFG2_TS_PACKETSIZE_376: + packet_size = 376; + break; + case EM28XX_CHIPCFG2_TS_PACKETSIZE_564: + packet_size = 564; + break; + case EM28XX_CHIPCFG2_TS_PACKETSIZE_752: + packet_size = 752; + break; + } + } + + em28xx_coredbg("dvb max packet size=%d\n", packet_size); + return packet_size; +} +EXPORT_SYMBOL_GPL(em28xx_isoc_dvb_max_packetsize); + /* * em28xx_wake_i2c() * configure i2c attached devices diff --git a/linux/drivers/media/video/em28xx/em28xx-dvb.c b/linux/drivers/media/video/em28xx/em28xx-dvb.c index dd749442d..85afa0be0 100644 --- a/linux/drivers/media/video/em28xx/em28xx-dvb.c +++ b/linux/drivers/media/video/em28xx/em28xx-dvb.c @@ -26,6 +26,8 @@ #include "em28xx.h" #include <media/v4l2-common.h> #include <media/videobuf-vmalloc.h> +#include <media/tuner.h> +#include "tuner-simple.h" #include "lgdt330x.h" #include "zl10353.h" @@ -47,7 +49,6 @@ if (debug >= level) \ } while (0) #define EM28XX_DVB_NUM_BUFS 5 -#define EM28XX_DVB_MAX_PACKETSIZE 564 #define EM28XX_DVB_MAX_PACKETS 64 struct em28xx_dvb { @@ -143,14 +144,17 @@ static int start_streaming(struct em28xx_dvb *dvb) { int rc; struct em28xx *dev = dvb->adapter.priv; + int max_dvb_packet_size; usb_set_interface(dev->udev, 0, 1); rc = em28xx_set_mode(dev, EM28XX_DIGITAL_MODE); if (rc < 0) return rc; + max_dvb_packet_size = em28xx_isoc_dvb_max_packetsize(dev); + return em28xx_init_isoc(dev, EM28XX_DVB_MAX_PACKETS, - EM28XX_DVB_NUM_BUFS, EM28XX_DVB_MAX_PACKETSIZE, + EM28XX_DVB_NUM_BUFS, max_dvb_packet_size, dvb_isoc_copy); } @@ -442,6 +446,7 @@ static int dvb_init(struct em28xx *dev) } break; case EM2883_BOARD_KWORLD_HYBRID_330U: + case EM2882_BOARD_EVGA_INDTUBE: dvb->frontend = dvb_attach(s5h1409_attach, &em28xx_s5h1409_with_xc3028, &dev->i2c_adap); @@ -450,6 +455,18 @@ static int dvb_init(struct em28xx *dev) goto out_free; } break; + case EM2882_BOARD_KWORLD_ATSC_315U: + dvb->frontend = dvb_attach(lgdt330x_attach, + &em2880_lgdt3303_dev, + &dev->i2c_adap); + if (dvb->frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, dvb->frontend, + &dev->i2c_adap, 0x61, TUNER_THOMSON_DTT761X)) { + result = -EINVAL; + goto out_free; + } + } + break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: #ifdef EM28XX_DRX397XD_SUPPORT /* We don't have the config structure properly populated, so diff --git a/linux/drivers/media/video/em28xx/em28xx-i2c.c b/linux/drivers/media/video/em28xx/em28xx-i2c.c index 24456cebd..1cdd88361 100644 --- a/linux/drivers/media/video/em28xx/em28xx-i2c.c +++ b/linux/drivers/media/video/em28xx/em28xx-i2c.c @@ -451,27 +451,6 @@ static u32 functionality(struct i2c_adapter *adap) return I2C_FUNC_SMBUS_EMUL; } -/* - * attach_inform() - * gets called when a device attaches to the i2c bus - * does some basic configuration - */ -static int attach_inform(struct i2c_client *client) -{ - struct em28xx *dev = client->adapter->algo_data; - struct IR_i2c *ir = i2c_get_clientdata(client); - - switch (client->addr << 1) { - case 0x60: - case 0x8e: - dprintk1(1, "attach_inform: IR detected (%s).\n", ir->phys); - em28xx_set_ir(dev, ir); - break; - } - - return 0; -} - static struct i2c_algorithm em28xx_algo = { .master_xfer = em28xx_i2c_xfer, .functionality = functionality, @@ -488,7 +467,6 @@ static struct i2c_adapter em28xx_adap_template = { .name = "em28xx", .id = I2C_HW_B_EM28XX, .algo = &em28xx_algo, - .client_register = attach_inform, }; static struct i2c_client em28xx_client_template = { @@ -581,6 +559,11 @@ int em28xx_i2c_register(struct em28xx *dev) if (i2c_scan) em28xx_do_i2c_scan(dev); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) + /* Instantiate the IR receiver device, if present */ + em28xx_register_i2c_ir(dev); + +#endif return 0; } diff --git a/linux/drivers/media/video/em28xx/em28xx-input.c b/linux/drivers/media/video/em28xx/em28xx-input.c index 5382a6064..df58b4c5b 100644 --- a/linux/drivers/media/video/em28xx/em28xx-input.c +++ b/linux/drivers/media/video/em28xx/em28xx-input.c @@ -41,7 +41,7 @@ MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]"); #define i2cdprintk(fmt, arg...) \ if (ir_debug) { \ - printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg); \ + printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \ } #define dprintk(fmt, arg...) \ @@ -86,7 +86,11 @@ int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char b; /* poll IR chip */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) if (1 != i2c_master_recv(&ir->c, &b, 1)) { +#else + if (1 != i2c_master_recv(ir->c, &b, 1)) { +#endif i2cdprintk("read error\n"); return -EIO; } @@ -115,7 +119,11 @@ int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char code; /* poll IR chip */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) if (2 != i2c_master_recv(&ir->c, buf, 2)) +#else + if (2 != i2c_master_recv(ir->c, buf, 2)) +#endif return -EIO; /* Does eliminate repeated parity code */ @@ -153,7 +161,11 @@ int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key, /* poll IR chip */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) if (3 != i2c_master_recv(&ir->c, buf, 3)) { +#else + if (3 != i2c_master_recv(ir->c, buf, 3)) { +#endif i2cdprintk("read error\n"); return -EIO; } diff --git a/linux/drivers/media/video/em28xx/em28xx-reg.h b/linux/drivers/media/video/em28xx/em28xx-reg.h index 24e39c568..a2676d63c 100644 --- a/linux/drivers/media/video/em28xx/em28xx-reg.h +++ b/linux/drivers/media/video/em28xx/em28xx-reg.h @@ -27,6 +27,22 @@ #define EM28XX_CHIPCFG_AC97 0x10 #define EM28XX_CHIPCFG_AUDIOMASK 0x30 +#define EM28XX_R01_CHIPCFG2 0x01 + +/* em28xx Chip Configuration 2 0x01 */ +#define EM28XX_CHIPCFG2_TS_PRESENT 0x10 +#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_MASK 0x0c /* bits 3-2 */ +#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_1MF 0x00 +#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_2MF 0x04 +#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_4MF 0x08 +#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_8MF 0x0c +#define EM28XX_CHIPCFG2_TS_PACKETSIZE_MASK 0x03 /* bits 0-1 */ +#define EM28XX_CHIPCFG2_TS_PACKETSIZE_188 0x00 +#define EM28XX_CHIPCFG2_TS_PACKETSIZE_376 0x01 +#define EM28XX_CHIPCFG2_TS_PACKETSIZE_564 0x02 +#define EM28XX_CHIPCFG2_TS_PACKETSIZE_752 0x03 + + /* GPIO/GPO registers */ #define EM2880_R04_GPO 0x04 /* em2880-em2883 only */ #define EM28XX_R08_GPIO 0x08 /* em2820 or upper */ diff --git a/linux/drivers/media/video/em28xx/em28xx-video.c b/linux/drivers/media/video/em28xx/em28xx-video.c index 1614e5fc4..63d21698c 100644 --- a/linux/drivers/media/video/em28xx/em28xx-video.c +++ b/linux/drivers/media/video/em28xx/em28xx-video.c @@ -691,8 +691,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, { struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; - int width = f->fmt.pix.width; - int height = f->fmt.pix.height; + unsigned int width = f->fmt.pix.width; + unsigned int height = f->fmt.pix.height; unsigned int maxw = norm_maxw(dev); unsigned int maxh = norm_maxh(dev); unsigned int hscale, vscale; @@ -705,34 +705,20 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return -EINVAL; } - /* width must even because of the YUYV format - height must be even because of interlacing */ - height &= 0xfffe; - width &= 0xfffe; - - if (unlikely(height < 32)) - height = 32; - if (unlikely(height > maxh)) - height = maxh; - if (unlikely(width < 48)) - width = 48; - if (unlikely(width > maxw)) - width = maxw; - if (dev->board.is_em2800) { /* the em2800 can only scale down to 50% */ - if (height % (maxh / 2)) - height = maxh; - if (width % (maxw / 2)) - width = maxw; - /* according to empiatech support */ - /* the MaxPacketSize is to small to support */ - /* framesizes larger than 640x480 @ 30 fps */ - /* or 640x576 @ 25 fps. As this would cut */ - /* of a part of the image we prefer */ - /* 360x576 or 360x480 for now */ + height = height > (3 * maxh / 4) ? maxh : maxh / 2; + width = width > (3 * maxw / 4) ? maxw : maxw / 2; + /* According to empiatech support the MaxPacketSize is too small + * to support framesizes larger than 640x480 @ 30 fps or 640x576 + * @ 25 fps. As this would cut of a part of the image we prefer + * 360x576 or 360x480 for now */ if (width == maxw && height == maxh) width /= 2; + } else { + /* width must even because of the YUYV format + height must be even because of interlacing */ + v4l_bound_align_image(&width, 48, maxw, 1, &height, 32, maxh, 1, 0); } get_scale(dev, width, height, &hscale, &vscale); diff --git a/linux/drivers/media/video/em28xx/em28xx.h b/linux/drivers/media/video/em28xx/em28xx.h index 966a3b924..6fb890efa 100644 --- a/linux/drivers/media/video/em28xx/em28xx.h +++ b/linux/drivers/media/video/em28xx/em28xx.h @@ -59,7 +59,7 @@ #define EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 16 #define EM2880_BOARD_PINNACLE_PCTV_HD_PRO 17 #define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 18 -#define EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA 19 +#define EM2860_BOARD_SAA711X_REFERENCE_DESIGN 19 #define EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 20 #define EM2800_BOARD_GRABBEEX_USB2800 21 #define EM2750_BOARD_UNKNOWN 22 @@ -104,6 +104,10 @@ #define EM2860_BOARD_EASYCAP 64 #define EM2820_BOARD_IODATA_GVMVP_SZ 65 #define EM2880_BOARD_EMPIRE_DUAL_TV 66 +#define EM2860_BOARD_TERRATEC_GRABBY 67 +#define EM2860_BOARD_TERRATEC_AV350 68 +#define EM2882_BOARD_KWORLD_ATSC_315U 69 +#define EM2882_BOARD_EVGA_INDTUBE 70 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 @@ -625,6 +629,7 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets, int num_bufs, int max_pkt_size, int (*isoc_copy) (struct em28xx *dev, struct urb *urb)); void em28xx_uninit_isoc(struct em28xx *dev); +int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev); int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode); int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio); void em28xx_wake_i2c(struct em28xx *dev); @@ -649,7 +654,7 @@ extern void em28xx_card_setup(struct em28xx *dev); extern struct em28xx_board em28xx_boards[]; extern struct usb_device_id em28xx_id_table[]; extern const unsigned int em28xx_bcount; -void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir); +void em28xx_register_i2c_ir(struct em28xx *dev); int em28xx_tuner_callback(void *ptr, int component, int command, int arg); void em28xx_release_resources(struct em28xx *dev); diff --git a/linux/drivers/media/video/gspca/gspca.c b/linux/drivers/media/video/gspca/gspca.c index c3c17faa3..f06aac676 100644 --- a/linux/drivers/media/video/gspca/gspca.c +++ b/linux/drivers/media/video/gspca/gspca.c @@ -875,6 +875,32 @@ out: return ret; } +static int vidioc_enum_framesizes(struct file *file, void *priv, + struct v4l2_frmsizeenum *fsize) +{ + struct gspca_dev *gspca_dev = priv; + int i; + __u32 index = 0; + + for (i = 0; i < gspca_dev->cam.nmodes; i++) { + if (fsize->pixel_format != + gspca_dev->cam.cam_mode[i].pixelformat) + continue; + + if (fsize->index == index) { + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; + fsize->discrete.width = + gspca_dev->cam.cam_mode[i].width; + fsize->discrete.height = + gspca_dev->cam.cam_mode[i].height; + return 0; + } + index++; + } + + return -EINVAL; +} + static void gspca_release(struct video_device *vfd) { struct gspca_dev *gspca_dev = container_of(vfd, struct gspca_dev, vdev); @@ -995,43 +1021,52 @@ out: return ret; } +static const struct ctrl *get_ctrl(struct gspca_dev *gspca_dev, + int id) +{ + const struct ctrl *ctrls; + int i; + + for (i = 0, ctrls = gspca_dev->sd_desc->ctrls; + i < gspca_dev->sd_desc->nctrls; + i++, ctrls++) { + if (gspca_dev->ctrl_dis & (1 << i)) + continue; + if (id == ctrls->qctrl.id) + return ctrls; + } + return NULL; +} + static int vidioc_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *q_ctrl) { struct gspca_dev *gspca_dev = priv; - int i, ix; + const struct ctrl *ctrls; + int i; u32 id; - ix = -1; + ctrls = NULL; id = q_ctrl->id; if (id & V4L2_CTRL_FLAG_NEXT_CTRL) { id &= V4L2_CTRL_ID_MASK; id++; for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) { - if (gspca_dev->sd_desc->ctrls[i].qctrl.id < id) + if (gspca_dev->ctrl_dis & (1 << i)) continue; - if (ix < 0) { - ix = i; + if (gspca_dev->sd_desc->ctrls[i].qctrl.id < id) continue; - } - if (gspca_dev->sd_desc->ctrls[i].qctrl.id - > gspca_dev->sd_desc->ctrls[ix].qctrl.id) + if (ctrls && gspca_dev->sd_desc->ctrls[i].qctrl.id + > ctrls->qctrl.id) continue; - ix = i; - } - } - for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) { - if (id == gspca_dev->sd_desc->ctrls[i].qctrl.id) { - ix = i; - break; + ctrls = &gspca_dev->sd_desc->ctrls[i]; } + } else { + ctrls = get_ctrl(gspca_dev, id); } - if (ix < 0) + if (ctrls == NULL) return -EINVAL; - memcpy(q_ctrl, &gspca_dev->sd_desc->ctrls[ix].qctrl, - sizeof *q_ctrl); - if (gspca_dev->ctrl_dis & (1 << ix)) - q_ctrl->flags |= V4L2_CTRL_FLAG_DISABLED; + memcpy(q_ctrl, ctrls, sizeof *q_ctrl); return 0; } @@ -1040,56 +1075,45 @@ static int vidioc_s_ctrl(struct file *file, void *priv, { struct gspca_dev *gspca_dev = priv; const struct ctrl *ctrls; - int i, ret; + int ret; - for (i = 0, ctrls = gspca_dev->sd_desc->ctrls; - i < gspca_dev->sd_desc->nctrls; - i++, ctrls++) { - if (ctrl->id != ctrls->qctrl.id) - continue; - if (gspca_dev->ctrl_dis & (1 << i)) - return -EINVAL; - if (ctrl->value < ctrls->qctrl.minimum - || ctrl->value > ctrls->qctrl.maximum) - return -ERANGE; - PDEBUG(D_CONF, "set ctrl [%08x] = %d", ctrl->id, ctrl->value); - if (mutex_lock_interruptible(&gspca_dev->usb_lock)) - return -ERESTARTSYS; - if (gspca_dev->present) - ret = ctrls->set(gspca_dev, ctrl->value); - else - ret = -ENODEV; - mutex_unlock(&gspca_dev->usb_lock); - return ret; - } - return -EINVAL; + ctrls = get_ctrl(gspca_dev, ctrl->id); + if (ctrls == NULL) + return -EINVAL; + + if (ctrl->value < ctrls->qctrl.minimum + || ctrl->value > ctrls->qctrl.maximum) + return -ERANGE; + PDEBUG(D_CONF, "set ctrl [%08x] = %d", ctrl->id, ctrl->value); + if (mutex_lock_interruptible(&gspca_dev->usb_lock)) + return -ERESTARTSYS; + if (gspca_dev->present) + ret = ctrls->set(gspca_dev, ctrl->value); + else + ret = -ENODEV; + mutex_unlock(&gspca_dev->usb_lock); + return ret; } static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct gspca_dev *gspca_dev = priv; - const struct ctrl *ctrls; - int i, ret; + int ret; - for (i = 0, ctrls = gspca_dev->sd_desc->ctrls; - i < gspca_dev->sd_desc->nctrls; - i++, ctrls++) { - if (ctrl->id != ctrls->qctrl.id) - continue; - if (gspca_dev->ctrl_dis & (1 << i)) - return -EINVAL; - if (mutex_lock_interruptible(&gspca_dev->usb_lock)) - return -ERESTARTSYS; - if (gspca_dev->present) - ret = ctrls->get(gspca_dev, &ctrl->value); - else - ret = -ENODEV; - mutex_unlock(&gspca_dev->usb_lock); - return ret; - } - return -EINVAL; + ctrls = get_ctrl(gspca_dev, ctrl->id); + if (ctrls == NULL) + return -EINVAL; + + if (mutex_lock_interruptible(&gspca_dev->usb_lock)) + return -ERESTARTSYS; + if (gspca_dev->present) + ret = ctrls->get(gspca_dev, &ctrl->value); + else + ret = -ENODEV; + mutex_unlock(&gspca_dev->usb_lock); + return ret; } /*fixme: have an audio flag in gspca_dev?*/ @@ -1870,6 +1894,7 @@ static const struct v4l2_ioctl_ops dev_ioctl_ops = { .vidioc_g_parm = vidioc_g_parm, .vidioc_s_parm = vidioc_s_parm, .vidioc_s_std = vidioc_s_std, + .vidioc_enum_framesizes = vidioc_enum_framesizes, #ifdef CONFIG_VIDEO_V4L1_COMPAT .vidiocgmbuf = vidiocgmbuf, #endif diff --git a/linux/drivers/media/video/gspca/m5602/m5602_ov9650.c b/linux/drivers/media/video/gspca/m5602/m5602_ov9650.c index bbf9935df..a1245cca1 100644 --- a/linux/drivers/media/video/gspca/m5602/m5602_ov9650.c +++ b/linux/drivers/media/video/gspca/m5602/m5602_ov9650.c @@ -47,53 +47,60 @@ static #endif struct dmi_system_id ov9650_flip_dmi_table[] = { { - .ident = "ASUS A6VA", + .ident = "ASUS A6Ja", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "A6VA") + DMI_MATCH(DMI_PRODUCT_NAME, "A6J") } }, { - - .ident = "ASUS A6VC", + .ident = "ASUS A6JC", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "A6VC") + DMI_MATCH(DMI_PRODUCT_NAME, "A6JC") } }, { - .ident = "ASUS A6VM", + .ident = "ASUS A6K", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "A6VM") + DMI_MATCH(DMI_PRODUCT_NAME, "A6K") } }, { - .ident = "ASUS A6JC", + .ident = "ASUS A6Kt", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "A6JC") + DMI_MATCH(DMI_PRODUCT_NAME, "A6Kt") } }, { - .ident = "ASUS A6Ja", + .ident = "ASUS A6VA", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "A6J") + DMI_MATCH(DMI_PRODUCT_NAME, "A6VA") } }, { - .ident = "ASUS A6Kt", + + .ident = "ASUS A6VC", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "A6Kt") + DMI_MATCH(DMI_PRODUCT_NAME, "A6VC") } }, { - .ident = "ASUS A6K", + .ident = "ASUS A6VM", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "A6K") + DMI_MATCH(DMI_PRODUCT_NAME, "A6VM") + } + }, + { + .ident = "ASUS A7V", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "A7V") } }, { diff --git a/linux/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/linux/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index 81f24d413..4a105cb38 100644 --- a/linux/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/linux/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -67,6 +67,12 @@ static DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"), DMI_MATCH(DMI_PRODUCT_NAME, "MS-1717X") } + }, { + .ident = "Lenovo Y300", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "L3000 Y300"), + DMI_MATCH(DMI_PRODUCT_NAME, "Y300") + } }, { } }; diff --git a/linux/drivers/media/video/gspca/ov519.c b/linux/drivers/media/video/gspca/ov519.c index bd70e9adb..cde3a0177 100644 --- a/linux/drivers/media/video/gspca/ov519.c +++ b/linux/drivers/media/video/gspca/ov519.c @@ -50,6 +50,19 @@ static int i2c_detect_tries = 10; struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ + __u8 packet_nr; + + char bridge; +#define BRIDGE_OV511 0 +#define BRIDGE_OV511PLUS 1 +#define BRIDGE_OV518 2 +#define BRIDGE_OV518PLUS 3 +#define BRIDGE_OV519 4 +#define BRIDGE_MASK 7 + + char invert_led; +#define BRIDGE_INVERT_LED 8 + /* Determined by sensor type */ __u8 sif; @@ -58,22 +71,25 @@ struct sd { __u8 colors; __u8 hflip; __u8 vflip; + __u8 autobrightness; + __u8 freq; __u8 stopped; /* Streaming is temporarily paused */ - __u8 frame_rate; /* current Framerate (OV519 only) */ - __u8 clockdiv; /* clockdiv override for OV519 only */ + __u8 frame_rate; /* current Framerate */ + __u8 clockdiv; /* clockdiv override */ char sensor; /* Type of image sensor chip (SEN_*) */ #define SEN_UNKNOWN 0 #define SEN_OV6620 1 #define SEN_OV6630 2 -#define SEN_OV7610 3 -#define SEN_OV7620 4 -#define SEN_OV7640 5 -#define SEN_OV7670 6 -#define SEN_OV76BE 7 -#define SEN_OV8610 8 +#define SEN_OV66308AF 3 +#define SEN_OV7610 4 +#define SEN_OV7620 5 +#define SEN_OV7640 6 +#define SEN_OV7670 7 +#define SEN_OV76BE 8 +#define SEN_OV8610 9 }; /* V4L2 controls supported by the driver */ @@ -87,8 +103,17 @@ static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val); static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); - -static struct ctrl sd_ctrls[] = { +static int sd_setautobrightness(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getautobrightness(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val); +static void setbrightness(struct gspca_dev *gspca_dev); +static void setcontrast(struct gspca_dev *gspca_dev); +static void setcolors(struct gspca_dev *gspca_dev); +static void setautobrightness(struct sd *sd); +static void setfreq(struct sd *sd); + +static const struct ctrl sd_ctrls[] = { { { .id = V4L2_CID_BRIGHTNESS, @@ -131,7 +156,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setcolors, .get = sd_getcolors, }, -/* next controls work with ov7670 only */ +/* The flip controls work with ov7670 only */ #define HFLIP_IDX 3 { { @@ -162,9 +187,54 @@ static struct ctrl sd_ctrls[] = { .set = sd_setvflip, .get = sd_getvflip, }, +#define AUTOBRIGHT_IDX 5 + { + { + .id = V4L2_CID_AUTOBRIGHTNESS, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto Brightness", + .minimum = 0, + .maximum = 1, + .step = 1, +#define AUTOBRIGHT_DEF 1 + .default_value = AUTOBRIGHT_DEF, + }, + .set = sd_setautobrightness, + .get = sd_getautobrightness, + }, +#define FREQ_IDX 6 + { + { + .id = V4L2_CID_POWER_LINE_FREQUENCY, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Light frequency filter", + .minimum = 0, + .maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */ + .step = 1, +#define FREQ_DEF 0 + .default_value = FREQ_DEF, + }, + .set = sd_setfreq, + .get = sd_getfreq, + }, +#define OV7670_FREQ_IDX 7 + { + { + .id = V4L2_CID_POWER_LINE_FREQUENCY, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Light frequency filter", + .minimum = 0, + .maximum = 3, /* 0: 0, 1: 50Hz, 2:60Hz 3: Auto Hz */ + .step = 1, +#define OV7670_FREQ_DEF 3 + .default_value = OV7670_FREQ_DEF, + }, + .set = sd_setfreq, + .get = sd_getfreq, + }, }; -static const struct v4l2_pix_format vga_mode[] = { +static const struct v4l2_pix_format ov519_vga_mode[] = { {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 320, .sizeimage = 320 * 240 * 3 / 8 + 590, @@ -176,12 +246,22 @@ static const struct v4l2_pix_format vga_mode[] = { .colorspace = V4L2_COLORSPACE_JPEG, .priv = 0}, }; -static const struct v4l2_pix_format sif_mode[] = { +static const struct v4l2_pix_format ov519_sif_mode[] = { + {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 160 * 120 * 3 / 8 + 590, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 3}, {176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 176, .sizeimage = 176 * 144 * 3 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 1}, + {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3 / 8 + 590, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 2}, {352, 288, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 352, .sizeimage = 352 * 288 * 3 / 8 + 590, @@ -189,6 +269,123 @@ static const struct v4l2_pix_format sif_mode[] = { .priv = 0}, }; +/* Note some of the sizeimage values for the ov511 / ov518 may seem + larger then necessary, however they need to be this big as the ov511 / + ov518 always fills the entire isoc frame, using 0 padding bytes when + it doesn't have any data. So with low framerates the amount of data + transfered can become quite large (libv4l will remove all the 0 padding + in userspace). */ +static const struct v4l2_pix_format ov518_vga_mode[] = { + {320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1}, + {640, 480, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480 * 2, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0}, +}; +static const struct v4l2_pix_format ov518_sif_mode[] = { + {160, 120, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 70000, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 3}, + {176, 144, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, + .bytesperline = 176, + .sizeimage = 70000, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1}, + {320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 2}, + {352, 288, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, + .bytesperline = 352, + .sizeimage = 352 * 288 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0}, +}; + +static const struct v4l2_pix_format ov511_vga_mode[] = { + {320, 240, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1}, + {640, 480, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480 * 2, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0}, +}; +static const struct v4l2_pix_format ov511_sif_mode[] = { + {160, 120, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 70000, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 3}, + {176, 144, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 176, + .sizeimage = 70000, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1}, + {320, 240, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 2}, + {352, 288, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 352, + .sizeimage = 352 * 288 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0}, +}; + +/* Registers common to OV511 / OV518 */ +#define R51x_FIFO_PSIZE 0x30 /* 2 bytes wide w/ OV518(+) */ +#define R51x_SYS_RESET 0x50 + /* Reset type flags */ + #define OV511_RESET_OMNICE 0x08 +#define R51x_SYS_INIT 0x53 +#define R51x_SYS_SNAP 0x52 +#define R51x_SYS_CUST_ID 0x5F +#define R51x_COMP_LUT_BEGIN 0x80 + +/* OV511 Camera interface register numbers */ +#define R511_CAM_DELAY 0x10 +#define R511_CAM_EDGE 0x11 +#define R511_CAM_PXCNT 0x12 +#define R511_CAM_LNCNT 0x13 +#define R511_CAM_PXDIV 0x14 +#define R511_CAM_LNDIV 0x15 +#define R511_CAM_UV_EN 0x16 +#define R511_CAM_LINE_MODE 0x17 +#define R511_CAM_OPTS 0x18 + +#define R511_SNAP_FRAME 0x19 +#define R511_SNAP_PXCNT 0x1A +#define R511_SNAP_LNCNT 0x1B +#define R511_SNAP_PXDIV 0x1C +#define R511_SNAP_LNDIV 0x1D +#define R511_SNAP_UV_EN 0x1E +#define R511_SNAP_UV_EN 0x1E +#define R511_SNAP_OPTS 0x1F + +#define R511_DRAM_FLOW_CTL 0x20 +#define R511_FIFO_OPTS 0x31 +#define R511_I2C_CTL 0x40 +#define R511_SYS_LED_CTL 0x55 /* OV511+ only */ +#define R511_COMP_EN 0x78 +#define R511_COMP_LUT_EN 0x79 + +/* OV518 Camera interface register numbers */ +#define R518_GPIO_OUT 0x56 /* OV518(+) only */ +#define R518_GPIO_CTL 0x57 /* OV518(+) only */ + /* OV519 Camera interface register numbers */ #define OV519_R10_H_SIZE 0x10 #define OV519_R11_V_SIZE 0x11 @@ -224,6 +421,8 @@ static const struct v4l2_pix_format sif_mode[] = { /* OV7610 registers */ #define OV7610_REG_GAIN 0x00 /* gain setting (5:0) */ +#define OV7610_REG_BLUE 0x01 /* blue channel balance */ +#define OV7610_REG_RED 0x02 /* red channel balance */ #define OV7610_REG_SAT 0x03 /* saturation */ #define OV8610_REG_HUE 0x04 /* 04 reserved */ #define OV7610_REG_CNT 0x05 /* Y contrast */ @@ -330,7 +529,7 @@ static const struct ov_i2c_regvals norm_6x20[] = { { 0x28, 0x05 }, { 0x2a, 0x04 }, /* Disable framerate adjust */ /* { 0x2b, 0xac }, * Framerate; Set 2a[7] first */ - { 0x2d, 0x99 }, + { 0x2d, 0x85 }, { 0x33, 0xa0 }, /* Color Processing Parameter */ { 0x34, 0xd2 }, /* Max A/D range */ { 0x38, 0x8b }, @@ -363,7 +562,7 @@ static const struct ov_i2c_regvals norm_6x30[] = { { 0x07, 0x2d }, /* Sharpness */ { 0x0c, 0x20 }, { 0x0d, 0x20 }, - { 0x0e, 0x20 }, + { 0x0e, 0xa0 }, /* Was 0x20, bit7 enables a 2x gain which we need */ { 0x0f, 0x05 }, { 0x10, 0x9a }, { 0x11, 0x00 }, /* Pixel clock = fastest */ @@ -505,7 +704,7 @@ static const struct ov_i2c_regvals norm_7620[] = { { 0x23, 0x00 }, { 0x26, 0xa2 }, { 0x27, 0xea }, - { 0x28, 0x20 }, + { 0x28, 0x22 }, /* Was 0x20, bit1 enables a 2x gain which we need */ { 0x29, 0x00 }, { 0x2a, 0x10 }, { 0x2b, 0x00 }, @@ -846,11 +1045,12 @@ static unsigned char ov7670_abs_to_sm(unsigned char v) static int reg_w(struct sd *sd, __u16 index, __u8 value) { int ret; + int req = (sd->bridge <= BRIDGE_OV511PLUS) ? 2 : 1; sd->gspca_dev.usb_buf[0] = value; ret = usb_control_msg(sd->gspca_dev.dev, usb_sndctrlpipe(sd->gspca_dev.dev, 0), - 1, /* REQ_IO (ov518/519) */ + req, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, index, sd->gspca_dev.usb_buf, 1, 500); @@ -864,10 +1064,11 @@ static int reg_w(struct sd *sd, __u16 index, __u8 value) static int reg_r(struct sd *sd, __u16 index) { int ret; + int req = (sd->bridge <= BRIDGE_OV511PLUS) ? 3 : 1; ret = usb_control_msg(sd->gspca_dev.dev, usb_rcvctrlpipe(sd->gspca_dev.dev, 0), - 1, /* REQ_IO */ + req, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, index, sd->gspca_dev.usb_buf, 1, 500); @@ -924,11 +1125,152 @@ static int reg_w_mask(struct sd *sd, } /* + * Writes multiple (n) byte value to a single register. Only valid with certain + * registers (0x30 and 0xc4 - 0xce). + */ +static int ov518_reg_w32(struct sd *sd, __u16 index, u32 value, int n) +{ + int ret; + + *((u32 *)sd->gspca_dev.usb_buf) = __cpu_to_le32(value); + + ret = usb_control_msg(sd->gspca_dev.dev, + usb_sndctrlpipe(sd->gspca_dev.dev, 0), + 1 /* REG_IO */, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, index, + sd->gspca_dev.usb_buf, n, 500); + if (ret < 0) + PDEBUG(D_ERR, "Write reg32 [%02x] %08x failed", index, value); + return ret; +} + +static int ov511_i2c_w(struct sd *sd, __u8 reg, __u8 value) +{ + int rc, retries; + + PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg); + + /* Three byte write cycle */ + for (retries = 6; ; ) { + /* Select camera register */ + rc = reg_w(sd, R51x_I2C_SADDR_3, reg); + if (rc < 0) + return rc; + + /* Write "value" to I2C data port of OV511 */ + rc = reg_w(sd, R51x_I2C_DATA, value); + if (rc < 0) + return rc; + + /* Initiate 3-byte write cycle */ + rc = reg_w(sd, R511_I2C_CTL, 0x01); + if (rc < 0) + return rc; + + do + rc = reg_r(sd, R511_I2C_CTL); + while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */ + + if (rc < 0) + return rc; + + if ((rc & 2) == 0) /* Ack? */ + break; +#if 0 + /* I2C abort */ + reg_w(sd, R511_I2C_CTL, 0x10); +#endif + if (--retries < 0) { + PDEBUG(D_USBO, "i2c write retries exhausted"); + return -1; + } + } + + return 0; +} + +static int ov511_i2c_r(struct sd *sd, __u8 reg) +{ + int rc, value, retries; + + /* Two byte write cycle */ + for (retries = 6; ; ) { + /* Select camera register */ + rc = reg_w(sd, R51x_I2C_SADDR_2, reg); + if (rc < 0) + return rc; + + /* Initiate 2-byte write cycle */ + rc = reg_w(sd, R511_I2C_CTL, 0x03); + if (rc < 0) + return rc; + + do + rc = reg_r(sd, R511_I2C_CTL); + while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */ + + if (rc < 0) + return rc; + + if ((rc & 2) == 0) /* Ack? */ + break; + + /* I2C abort */ + reg_w(sd, R511_I2C_CTL, 0x10); + + if (--retries < 0) { + PDEBUG(D_USBI, "i2c write retries exhausted"); + return -1; + } + } + + /* Two byte read cycle */ + for (retries = 6; ; ) { + /* Initiate 2-byte read cycle */ + rc = reg_w(sd, R511_I2C_CTL, 0x05); + if (rc < 0) + return rc; + + do + rc = reg_r(sd, R511_I2C_CTL); + while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */ + + if (rc < 0) + return rc; + + if ((rc & 2) == 0) /* Ack? */ + break; + + /* I2C abort */ + rc = reg_w(sd, R511_I2C_CTL, 0x10); + if (rc < 0) + return rc; + + if (--retries < 0) { + PDEBUG(D_USBI, "i2c read retries exhausted"); + return -1; + } + } + + value = reg_r(sd, R51x_I2C_DATA); + + PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value); + + /* This is needed to make i2c_w() work */ + rc = reg_w(sd, R511_I2C_CTL, 0x05); + if (rc < 0) + return rc; + + return value; +} + +/* * The OV518 I2C I/O procedure is different, hence, this function. * This is normally only called from i2c_w(). Note that this function * always succeeds regardless of whether the sensor is present and working. */ -static int i2c_w(struct sd *sd, +static int ov518_i2c_w(struct sd *sd, __u8 reg, __u8 value) { @@ -963,7 +1305,7 @@ static int i2c_w(struct sd *sd, * This is normally only called from i2c_r(). Note that this function * always succeeds regardless of whether the sensor is present and working. */ -static int i2c_r(struct sd *sd, __u8 reg) +static int ov518_i2c_r(struct sd *sd, __u8 reg) { int rc, value; @@ -986,6 +1328,34 @@ static int i2c_r(struct sd *sd, __u8 reg) return value; } +static int i2c_w(struct sd *sd, __u8 reg, __u8 value) +{ + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + return ov511_i2c_w(sd, reg, value); + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + case BRIDGE_OV519: + return ov518_i2c_w(sd, reg, value); + } + return -1; /* Should never happen */ +} + +static int i2c_r(struct sd *sd, __u8 reg) +{ + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + return ov511_i2c_r(sd, reg); + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + case BRIDGE_OV519: + return ov518_i2c_r(sd, reg); + } + return -1; /* Should never happen */ +} + /* Writes bits at positions specified by mask to an I2C reg. Bits that are in * the same position as 1's in "mask" are cleared and set to "value". Bits * that are in the same position as 0's in "mask" are preserved, regardless @@ -1014,20 +1384,47 @@ static inline int ov51x_stop(struct sd *sd) { PDEBUG(D_STREAM, "stopping"); sd->stopped = 1; - return reg_w(sd, OV519_SYS_RESET1, 0x0f); + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + return reg_w(sd, R51x_SYS_RESET, 0x3d); + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + return reg_w_mask(sd, R51x_SYS_RESET, 0x3a, 0x3a); + case BRIDGE_OV519: + return reg_w(sd, OV519_SYS_RESET1, 0x0f); + } + + return 0; } /* Restarts OV511 after ov511_stop() is called. Has no effect if it is not * actually stopped (for performance). */ static inline int ov51x_restart(struct sd *sd) { + int rc; + PDEBUG(D_STREAM, "restarting"); if (!sd->stopped) return 0; sd->stopped = 0; /* Reinitialize the stream */ - return reg_w(sd, OV519_SYS_RESET1, 0x00); + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + return reg_w(sd, R51x_SYS_RESET, 0x00); + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + rc = reg_w(sd, 0x2f, 0x80); + if (rc < 0) + return rc; + return reg_w(sd, R51x_SYS_RESET, 0x00); + case BRIDGE_OV519: + return reg_w(sd, OV519_SYS_RESET1, 0x00); + } + + return 0; } /* This does an initial reset of an OmniVision sensor and ensures that I2C @@ -1138,7 +1535,6 @@ static int ov8xx0_configure(struct sd *sd) } /* Set sensor-specific vars */ -/* sd->sif = 0; already done */ return 0; } @@ -1175,15 +1571,13 @@ static int ov7xx0_configure(struct sd *sd) } } else if ((rc & 3) == 1) { /* I don't know what's different about the 76BE yet. */ - if (i2c_r(sd, 0x15) & 1) + if (i2c_r(sd, 0x15) & 1) { PDEBUG(D_PROBE, "Sensor is an OV7620AE"); - else + sd->sensor = SEN_OV7620; + } else { PDEBUG(D_PROBE, "Sensor is an OV76BE"); - - /* OV511+ will return all zero isoc data unless we - * configure the sensor as a 7620. Someone needs to - * find the exact reg. setting that causes this. */ - sd->sensor = SEN_OV76BE; + sd->sensor = SEN_OV76BE; + } } else if ((rc & 3) == 0) { /* try to read product id registers */ high = i2c_r(sd, 0x0a); @@ -1229,7 +1623,6 @@ static int ov7xx0_configure(struct sd *sd) } /* Set sensor-specific vars */ -/* sd->sif = 0; already done */ return 0; } @@ -1258,13 +1651,14 @@ static int ov6xx0_configure(struct sd *sd) break; case 0x01: sd->sensor = SEN_OV6620; + PDEBUG(D_PROBE, "Sensor is an OV6620"); break; case 0x02: sd->sensor = SEN_OV6630; PDEBUG(D_PROBE, "Sensor is an OV66308AE"); break; case 0x03: - sd->sensor = SEN_OV6630; + sd->sensor = SEN_OV66308AF; PDEBUG(D_PROBE, "Sensor is an OV66308AF"); break; case 0x90: @@ -1287,16 +1681,276 @@ static int ov6xx0_configure(struct sd *sd) /* Turns on or off the LED. Only has an effect with OV511+/OV518(+)/OV519 */ static void ov51x_led_control(struct sd *sd, int on) { - reg_w_mask(sd, OV519_GPIO_DATA_OUT0, !on, 1); /* 0 / 1 */ + if (sd->invert_led) + on = !on; + + switch (sd->bridge) { + /* OV511 has no LED control */ + case BRIDGE_OV511PLUS: + reg_w(sd, R511_SYS_LED_CTL, on ? 1 : 0); + break; + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + reg_w_mask(sd, R518_GPIO_OUT, on ? 0x02 : 0x00, 0x02); + break; + case BRIDGE_OV519: + reg_w_mask(sd, OV519_GPIO_DATA_OUT0, !on, 1); /* 0 / 1 */ + break; + } } -/* this function is called at probe time */ -static int sd_config(struct gspca_dev *gspca_dev, - const struct usb_device_id *id) +static int ov51x_upload_quan_tables(struct sd *sd) +{ + const unsigned char yQuanTable511[] = { + 0, 1, 1, 2, 2, 3, 3, 4, + 1, 1, 1, 2, 2, 3, 4, 4, + 1, 1, 2, 2, 3, 4, 4, 4, + 2, 2, 2, 3, 4, 4, 4, 4, + 2, 2, 3, 4, 4, 5, 5, 5, + 3, 3, 4, 4, 5, 5, 5, 5, + 3, 4, 4, 4, 5, 5, 5, 5, + 4, 4, 4, 4, 5, 5, 5, 5 + }; + + const unsigned char uvQuanTable511[] = { + 0, 2, 2, 3, 4, 4, 4, 4, + 2, 2, 2, 4, 4, 4, 4, 4, + 2, 2, 3, 4, 4, 4, 4, 4, + 3, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4 + }; + + /* OV518 quantization tables are 8x4 (instead of 8x8) */ + const unsigned char yQuanTable518[] = { + 5, 4, 5, 6, 6, 7, 7, 7, + 5, 5, 5, 5, 6, 7, 7, 7, + 6, 6, 6, 6, 7, 7, 7, 8, + 7, 7, 6, 7, 7, 7, 8, 8 + }; + + const unsigned char uvQuanTable518[] = { + 6, 6, 6, 7, 7, 7, 7, 7, + 6, 6, 6, 7, 7, 7, 7, 7, + 6, 6, 6, 7, 7, 7, 7, 8, + 7, 7, 7, 7, 7, 7, 8, 8 + }; + + const unsigned char *pYTable, *pUVTable; + unsigned char val0, val1; + int i, size, rc, reg = R51x_COMP_LUT_BEGIN; + + PDEBUG(D_PROBE, "Uploading quantization tables"); + + if (sd->bridge == BRIDGE_OV511 || sd->bridge == BRIDGE_OV511PLUS) { + pYTable = yQuanTable511; + pUVTable = uvQuanTable511; + size = 32; + } else { + pYTable = yQuanTable518; + pUVTable = uvQuanTable518; + size = 16; + } + + for (i = 0; i < size; i++) { + val0 = *pYTable++; + val1 = *pYTable++; + val0 &= 0x0f; + val1 &= 0x0f; + val0 |= val1 << 4; + rc = reg_w(sd, reg, val0); + if (rc < 0) + return rc; + + val0 = *pUVTable++; + val1 = *pUVTable++; + val0 &= 0x0f; + val1 &= 0x0f; + val0 |= val1 << 4; + rc = reg_w(sd, reg + size, val0); + if (rc < 0) + return rc; + + reg++; + } + + return 0; +} + +/* This initializes the OV511/OV511+ and the sensor */ +static int ov511_configure(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - struct cam *cam; + int rc; + + /* For 511 and 511+ */ + const struct ov_regvals init_511[] = { + { R51x_SYS_RESET, 0x7f }, + { R51x_SYS_INIT, 0x01 }, + { R51x_SYS_RESET, 0x7f }, + { R51x_SYS_INIT, 0x01 }, + { R51x_SYS_RESET, 0x3f }, + { R51x_SYS_INIT, 0x01 }, + { R51x_SYS_RESET, 0x3d }, + }; + + const struct ov_regvals norm_511[] = { + { R511_DRAM_FLOW_CTL, 0x01 }, + { R51x_SYS_SNAP, 0x00 }, + { R51x_SYS_SNAP, 0x02 }, + { R51x_SYS_SNAP, 0x00 }, + { R511_FIFO_OPTS, 0x1f }, + { R511_COMP_EN, 0x00 }, + { R511_COMP_LUT_EN, 0x03 }, + }; + + const struct ov_regvals norm_511_p[] = { + { R511_DRAM_FLOW_CTL, 0xff }, + { R51x_SYS_SNAP, 0x00 }, + { R51x_SYS_SNAP, 0x02 }, + { R51x_SYS_SNAP, 0x00 }, + { R511_FIFO_OPTS, 0xff }, + { R511_COMP_EN, 0x00 }, + { R511_COMP_LUT_EN, 0x03 }, + }; + + const struct ov_regvals compress_511[] = { + { 0x70, 0x1f }, + { 0x71, 0x05 }, + { 0x72, 0x06 }, + { 0x73, 0x06 }, + { 0x74, 0x14 }, + { 0x75, 0x03 }, + { 0x76, 0x04 }, + { 0x77, 0x04 }, + }; + + PDEBUG(D_PROBE, "Device custom id %x", reg_r(sd, R51x_SYS_CUST_ID)); + + rc = write_regvals(sd, init_511, ARRAY_SIZE(init_511)); + if (rc < 0) + return rc; + + switch (sd->bridge) { + case BRIDGE_OV511: + rc = write_regvals(sd, norm_511, ARRAY_SIZE(norm_511)); + if (rc < 0) + return rc; + break; + case BRIDGE_OV511PLUS: + rc = write_regvals(sd, norm_511_p, ARRAY_SIZE(norm_511_p)); + if (rc < 0) + return rc; + break; + } + + /* Init compression */ + rc = write_regvals(sd, compress_511, ARRAY_SIZE(compress_511)); + if (rc < 0) + return rc; + + rc = ov51x_upload_quan_tables(sd); + if (rc < 0) { + PDEBUG(D_ERR, "Error uploading quantization tables"); + return rc; + } + + return 0; +} + +/* This initializes the OV518/OV518+ and the sensor */ +static int ov518_configure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int rc; + + /* For 518 and 518+ */ + const struct ov_regvals init_518[] = { + { R51x_SYS_RESET, 0x40 }, + { R51x_SYS_INIT, 0xe1 }, + { R51x_SYS_RESET, 0x3e }, + { R51x_SYS_INIT, 0xe1 }, + { R51x_SYS_RESET, 0x00 }, + { R51x_SYS_INIT, 0xe1 }, + { 0x46, 0x00 }, + { 0x5d, 0x03 }, + }; + + const struct ov_regvals norm_518[] = { + { R51x_SYS_SNAP, 0x02 }, /* Reset */ + { R51x_SYS_SNAP, 0x01 }, /* Enable */ + { 0x31, 0x0f }, + { 0x5d, 0x03 }, + { 0x24, 0x9f }, + { 0x25, 0x90 }, + { 0x20, 0x00 }, + { 0x51, 0x04 }, + { 0x71, 0x19 }, + { 0x2f, 0x80 }, + }; + + const struct ov_regvals norm_518_p[] = { + { R51x_SYS_SNAP, 0x02 }, /* Reset */ + { R51x_SYS_SNAP, 0x01 }, /* Enable */ + { 0x31, 0x0f }, + { 0x5d, 0x03 }, + { 0x24, 0x9f }, + { 0x25, 0x90 }, + { 0x20, 0x60 }, + { 0x51, 0x02 }, + { 0x71, 0x19 }, + { 0x40, 0xff }, + { 0x41, 0x42 }, + { 0x46, 0x00 }, + { 0x33, 0x04 }, + { 0x21, 0x19 }, + { 0x3f, 0x10 }, + { 0x2f, 0x80 }, + }; + + /* First 5 bits of custom ID reg are a revision ID on OV518 */ + PDEBUG(D_PROBE, "Device revision %d", + 0x1F & reg_r(sd, R51x_SYS_CUST_ID)); + + rc = write_regvals(sd, init_518, ARRAY_SIZE(init_518)); + if (rc < 0) + return rc; + + /* Set LED GPIO pin to output mode */ + rc = reg_w_mask(sd, R518_GPIO_CTL, 0x00, 0x02); + if (rc < 0) + return rc; + + switch (sd->bridge) { + case BRIDGE_OV518: + rc = write_regvals(sd, norm_518, ARRAY_SIZE(norm_518)); + if (rc < 0) + return rc; + break; + case BRIDGE_OV518PLUS: + rc = write_regvals(sd, norm_518_p, ARRAY_SIZE(norm_518_p)); + if (rc < 0) + return rc; + break; + } + rc = ov51x_upload_quan_tables(sd); + if (rc < 0) { + PDEBUG(D_ERR, "Error uploading quantization tables"); + return rc; + } + + rc = reg_w(sd, 0x2f, 0x80); + if (rc < 0) + return rc; + + return 0; +} + +static int ov519_configure(struct sd *sd) +{ static const struct ov_regvals init_519[] = { { 0x5a, 0x6d }, /* EnableSystem */ { 0x53, 0x9b }, @@ -1313,8 +1967,37 @@ static int sd_config(struct gspca_dev *gspca_dev, /* windows reads 0x55 at this point*/ }; - if (write_regvals(sd, init_519, ARRAY_SIZE(init_519))) + return write_regvals(sd, init_519, ARRAY_SIZE(init_519)); +} + +/* this function is called at probe time */ +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct sd *sd = (struct sd *) gspca_dev; + struct cam *cam; + int ret = 0; + + sd->bridge = id->driver_info & BRIDGE_MASK; + sd->invert_led = id->driver_info & BRIDGE_INVERT_LED; + + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + ret = ov511_configure(gspca_dev); + break; + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + ret = ov518_configure(gspca_dev); + break; + case BRIDGE_OV519: + ret = ov519_configure(sd); + break; + } + + if (ret) goto error; + ov51x_led_control(sd, 0); /* turn LED off */ /* Test for 76xx */ @@ -1360,21 +2043,60 @@ static int sd_config(struct gspca_dev *gspca_dev, } cam = &gspca_dev->cam; - if (!sd->sif) { - cam->cam_mode = vga_mode; - cam->nmodes = ARRAY_SIZE(vga_mode); - } else { - cam->cam_mode = sif_mode; - cam->nmodes = ARRAY_SIZE(sif_mode); + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + if (!sd->sif) { + cam->cam_mode = ov511_vga_mode; + cam->nmodes = ARRAY_SIZE(ov511_vga_mode); + } else { + cam->cam_mode = ov511_sif_mode; + cam->nmodes = ARRAY_SIZE(ov511_sif_mode); + } + break; + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + if (!sd->sif) { + cam->cam_mode = ov518_vga_mode; + cam->nmodes = ARRAY_SIZE(ov518_vga_mode); + } else { + cam->cam_mode = ov518_sif_mode; + cam->nmodes = ARRAY_SIZE(ov518_sif_mode); + } + break; + case BRIDGE_OV519: + if (!sd->sif) { + cam->cam_mode = ov519_vga_mode; + cam->nmodes = ARRAY_SIZE(ov519_vga_mode); + } else { + cam->cam_mode = ov519_sif_mode; + cam->nmodes = ARRAY_SIZE(ov519_sif_mode); + } + break; } sd->brightness = BRIGHTNESS_DEF; - sd->contrast = CONTRAST_DEF; + if (sd->sensor == SEN_OV6630 || sd->sensor == SEN_OV66308AF) + sd->contrast = 200; /* The default is too low for the ov6630 */ + else + sd->contrast = CONTRAST_DEF; sd->colors = COLOR_DEF; sd->hflip = HFLIP_DEF; sd->vflip = VFLIP_DEF; - if (sd->sensor != SEN_OV7670) - gspca_dev->ctrl_dis = (1 << HFLIP_IDX) - | (1 << VFLIP_IDX); + sd->autobrightness = AUTOBRIGHT_DEF; + if (sd->sensor == SEN_OV7670) { + sd->freq = OV7670_FREQ_DEF; + gspca_dev->ctrl_dis = 1 << FREQ_IDX; + } else { + sd->freq = FREQ_DEF; + gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | + (1 << OV7670_FREQ_IDX); + } + if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670) + gspca_dev->ctrl_dis |= 1 << AUTOBRIGHT_IDX; + /* OV8610 Frequency filter control should work but needs testing */ + if (sd->sensor == SEN_OV8610) + gspca_dev->ctrl_dis |= 1 << FREQ_IDX; + return 0; error: PDEBUG(D_ERR, "OV519 Config failed"); @@ -1393,6 +2115,7 @@ static int sd_init(struct gspca_dev *gspca_dev) return -EIO; break; case SEN_OV6630: + case SEN_OV66308AF: if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30))) return -EIO; break; @@ -1401,6 +2124,8 @@ static int sd_init(struct gspca_dev *gspca_dev) /* case SEN_OV76BE: */ if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610))) return -EIO; + if (i2c_w_mask(sd, 0x0e, 0x00, 0x40)) + return -EIO; break; case SEN_OV7620: if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620))) @@ -1422,6 +2147,248 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } +/* Set up the OV511/OV511+ with the given image parameters. + * + * Do not put any sensor-specific code in here (including I2C I/O functions) + */ +static int ov511_mode_init_regs(struct sd *sd) +{ + int hsegs, vsegs, packet_size, fps, needed; + int interlaced = 0; + struct usb_host_interface *alt; + struct usb_interface *intf; + + intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); + alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); + if (!alt) { + PDEBUG(D_ERR, "Couldn't get altsetting"); + return -EIO; + } + + packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); + reg_w(sd, R51x_FIFO_PSIZE, packet_size >> 5); + + reg_w(sd, R511_CAM_UV_EN, 0x01); + reg_w(sd, R511_SNAP_UV_EN, 0x01); + reg_w(sd, R511_SNAP_OPTS, 0x03); + + /* Here I'm assuming that snapshot size == image size. + * I hope that's always true. --claudio + */ + hsegs = (sd->gspca_dev.width >> 3) - 1; + vsegs = (sd->gspca_dev.height >> 3) - 1; + + reg_w(sd, R511_CAM_PXCNT, hsegs); + reg_w(sd, R511_CAM_LNCNT, vsegs); + reg_w(sd, R511_CAM_PXDIV, 0x00); + reg_w(sd, R511_CAM_LNDIV, 0x00); + + /* YUV420, low pass filter on */ + reg_w(sd, R511_CAM_OPTS, 0x03); + + /* Snapshot additions */ + reg_w(sd, R511_SNAP_PXCNT, hsegs); + reg_w(sd, R511_SNAP_LNCNT, vsegs); + reg_w(sd, R511_SNAP_PXDIV, 0x00); + reg_w(sd, R511_SNAP_LNDIV, 0x00); + + /******** Set the framerate ********/ + if (frame_rate > 0) + sd->frame_rate = frame_rate; + + switch (sd->sensor) { + case SEN_OV6620: + /* No framerate control, doesn't like higher rates yet */ + sd->clockdiv = 3; + break; + + /* Note once the FIXME's in mode_init_ov_sensor_regs() are fixed + for more sensors we need to do this for them too */ + case SEN_OV7620: + case SEN_OV7640: + case SEN_OV76BE: + if (sd->gspca_dev.width == 320) + interlaced = 1; + /* Fall through */ + case SEN_OV6630: + case SEN_OV7610: + case SEN_OV7670: + switch (sd->frame_rate) { + case 30: + case 25: + /* Not enough bandwidth to do 640x480 @ 30 fps */ + if (sd->gspca_dev.width != 640) { + sd->clockdiv = 0; + break; + } + /* Fall through for 640x480 case */ + default: +/* case 20: */ +/* case 15: */ + sd->clockdiv = 1; + break; + case 10: + sd->clockdiv = 2; + break; + case 5: + sd->clockdiv = 5; + break; + } + if (interlaced) { + sd->clockdiv = (sd->clockdiv + 1) * 2 - 1; + /* Higher then 10 does not work */ + if (sd->clockdiv > 10) + sd->clockdiv = 10; + } + break; + + case SEN_OV8610: + /* No framerate control ?? */ + sd->clockdiv = 0; + break; + } + + /* Check if we have enough bandwidth to disable compression */ + fps = (interlaced ? 60 : 30) / (sd->clockdiv + 1) + 1; + needed = fps * sd->gspca_dev.width * sd->gspca_dev.height * 3 / 2; + /* 1400 is a conservative estimate of the max nr of isoc packets/sec */ + if (needed > 1400 * packet_size) { + /* Enable Y and UV quantization and compression */ + reg_w(sd, R511_COMP_EN, 0x07); + reg_w(sd, R511_COMP_LUT_EN, 0x03); + } else { + reg_w(sd, R511_COMP_EN, 0x06); + reg_w(sd, R511_COMP_LUT_EN, 0x00); + } + + reg_w(sd, R51x_SYS_RESET, OV511_RESET_OMNICE); + reg_w(sd, R51x_SYS_RESET, 0); + + return 0; +} + +/* Sets up the OV518/OV518+ with the given image parameters + * + * OV518 needs a completely different approach, until we can figure out what + * the individual registers do. Also, only 15 FPS is supported now. + * + * Do not put any sensor-specific code in here (including I2C I/O functions) + */ +static int ov518_mode_init_regs(struct sd *sd) +{ + int hsegs, vsegs, packet_size; + struct usb_host_interface *alt; + struct usb_interface *intf; + + intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); + alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); + if (!alt) { + PDEBUG(D_ERR, "Couldn't get altsetting"); + return -EIO; + } + + packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); + ov518_reg_w32(sd, R51x_FIFO_PSIZE, packet_size & ~7, 2); + + /******** Set the mode ********/ + + reg_w(sd, 0x2b, 0); + reg_w(sd, 0x2c, 0); + reg_w(sd, 0x2d, 0); + reg_w(sd, 0x2e, 0); + reg_w(sd, 0x3b, 0); + reg_w(sd, 0x3c, 0); + reg_w(sd, 0x3d, 0); + reg_w(sd, 0x3e, 0); + + if (sd->bridge == BRIDGE_OV518) { + /* Set 8-bit (YVYU) input format */ + reg_w_mask(sd, 0x20, 0x08, 0x08); + + /* Set 12-bit (4:2:0) output format */ + reg_w_mask(sd, 0x28, 0x80, 0xf0); + reg_w_mask(sd, 0x38, 0x80, 0xf0); + } else { + reg_w(sd, 0x28, 0x80); + reg_w(sd, 0x38, 0x80); + } + + hsegs = sd->gspca_dev.width / 16; + vsegs = sd->gspca_dev.height / 4; + + reg_w(sd, 0x29, hsegs); + reg_w(sd, 0x2a, vsegs); + + reg_w(sd, 0x39, hsegs); + reg_w(sd, 0x3a, vsegs); + + /* Windows driver does this here; who knows why */ + reg_w(sd, 0x2f, 0x80); + + /******** Set the framerate ********/ + sd->clockdiv = 1; + + /* Mode independent, but framerate dependent, regs */ + /* 0x51: Clock divider; Only works on some cams which use 2 crystals */ + reg_w(sd, 0x51, 0x04); + reg_w(sd, 0x22, 0x18); + reg_w(sd, 0x23, 0xff); + + if (sd->bridge == BRIDGE_OV518PLUS) { + switch (sd->sensor) { + case SEN_OV7620: + if (sd->gspca_dev.width == 320) { + reg_w(sd, 0x20, 0x00); + reg_w(sd, 0x21, 0x19); + } else { + reg_w(sd, 0x20, 0x60); + reg_w(sd, 0x21, 0x1f); + } + break; + default: + reg_w(sd, 0x21, 0x19); + } + } else + reg_w(sd, 0x71, 0x17); /* Compression-related? */ + + /* FIXME: Sensor-specific */ + /* Bit 5 is what matters here. Of course, it is "reserved" */ + i2c_w(sd, 0x54, 0x23); + + reg_w(sd, 0x2f, 0x80); + + if (sd->bridge == BRIDGE_OV518PLUS) { + reg_w(sd, 0x24, 0x94); + reg_w(sd, 0x25, 0x90); + ov518_reg_w32(sd, 0xc4, 400, 2); /* 190h */ + ov518_reg_w32(sd, 0xc6, 540, 2); /* 21ch */ + ov518_reg_w32(sd, 0xc7, 540, 2); /* 21ch */ + ov518_reg_w32(sd, 0xc8, 108, 2); /* 6ch */ + ov518_reg_w32(sd, 0xca, 131098, 3); /* 2001ah */ + ov518_reg_w32(sd, 0xcb, 532, 2); /* 214h */ + ov518_reg_w32(sd, 0xcc, 2400, 2); /* 960h */ + ov518_reg_w32(sd, 0xcd, 32, 2); /* 20h */ + ov518_reg_w32(sd, 0xce, 608, 2); /* 260h */ + } else { + reg_w(sd, 0x24, 0x9f); + reg_w(sd, 0x25, 0x90); + ov518_reg_w32(sd, 0xc4, 400, 2); /* 190h */ + ov518_reg_w32(sd, 0xc6, 381, 2); /* 17dh */ + ov518_reg_w32(sd, 0xc7, 381, 2); /* 17dh */ + ov518_reg_w32(sd, 0xc8, 128, 2); /* 80h */ + ov518_reg_w32(sd, 0xca, 183331, 3); /* 2cc23h */ + ov518_reg_w32(sd, 0xcb, 746, 2); /* 2eah */ + ov518_reg_w32(sd, 0xcc, 1750, 2); /* 6d6h */ + ov518_reg_w32(sd, 0xcd, 45, 2); /* 2dh */ + ov518_reg_w32(sd, 0xce, 851, 2); /* 353h */ + } + + reg_w(sd, 0x2f, 0x80); + + return 0; +} + + /* Sets up the OV519 with the given image parameters * * OV519 needs a completely different approach, until we can figure out what @@ -1492,7 +2459,11 @@ static int ov519_mode_init_regs(struct sd *sd) reg_w(sd, OV519_R10_H_SIZE, sd->gspca_dev.width >> 4); reg_w(sd, OV519_R11_V_SIZE, sd->gspca_dev.height >> 3); - reg_w(sd, OV519_R12_X_OFFSETL, 0x00); + if (sd->sensor == SEN_OV7670 && + sd->gspca_dev.cam.cam_mode[sd->gspca_dev.curr_mode].priv) + reg_w(sd, OV519_R12_X_OFFSETL, 0x04); + else + reg_w(sd, OV519_R12_X_OFFSETL, 0x00); reg_w(sd, OV519_R13_X_OFFSETH, 0x00); reg_w(sd, OV519_R14_Y_OFFSETL, 0x00); reg_w(sd, OV519_R15_Y_OFFSETH, 0x00); @@ -1584,7 +2555,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd) int qvga; gspca_dev = &sd->gspca_dev; - qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; + qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1; /******** Mode (VGA/QVGA) and sensor specific regs ********/ switch (sd->sensor) { @@ -1612,30 +2583,16 @@ static int mode_init_ov_sensor_regs(struct sd *sd) #endif break; case SEN_OV7620: -/* i2c_w(sd, 0x2b, 0x00); */ - i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); - i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20); - i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a); - i2c_w(sd, 0x25, qvga ? 0x30 : 0x60); - i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40); - i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0); - i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20); - break; case SEN_OV76BE: -/* i2c_w(sd, 0x2b, 0x00); */ i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); -#if 0 - /* FIXME: Enable this once 7620AE uses 7620 initial settings */ i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20); i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a); i2c_w(sd, 0x25, qvga ? 0x30 : 0x60); i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40); i2c_w_mask(sd, 0x67, qvga ? 0xb0 : 0x90, 0xf0); i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20); -#endif break; case SEN_OV7640: -/* i2c_w(sd, 0x2b, 0x00); */ i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20); /* i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a); */ @@ -1654,6 +2611,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd) break; case SEN_OV6620: case SEN_OV6630: + case SEN_OV66308AF: i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); break; default: @@ -1661,10 +2619,6 @@ static int mode_init_ov_sensor_regs(struct sd *sd) } /******** Palette-specific regs ********/ - if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) { - /* not valid on the OV6620/OV7620/6630? */ - i2c_w_mask(sd, 0x0e, 0x00, 0x40); - } /* The OV518 needs special treatment. Although both the OV518 * and the OV6630 support a 16-bit video bus, only the 8 bit Y @@ -1674,25 +2628,12 @@ static int mode_init_ov_sensor_regs(struct sd *sd) /* OV7640 is 8-bit only */ - if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV7640) + if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV66308AF && + sd->sensor != SEN_OV7640) i2c_w_mask(sd, 0x13, 0x00, 0x20); /******** Clock programming ********/ - /* The OV6620 needs special handling. This prevents the - * severe banding that normally occurs */ - if (sd->sensor == SEN_OV6620) { - - /* Clock down */ - i2c_w(sd, 0x2a, 0x04); - i2c_w(sd, 0x11, sd->clockdiv); - i2c_w(sd, 0x2a, 0x84); - /* This next setting is critical. It seems to improve - * the gain or the contrast. The "reserved" bits seem - * to have some effect in this case. */ - i2c_w(sd, 0x2d, 0x85); - } else { - i2c_w(sd, 0x11, sd->clockdiv); - } + i2c_w(sd, 0x11, sd->clockdiv); /******** Special Features ********/ /* no evidence this is possible with OV7670, either */ @@ -1736,13 +2677,14 @@ static void sethvflip(struct sd *sd) static int set_ov_sensor_window(struct sd *sd) { struct gspca_dev *gspca_dev; - int qvga; + int qvga, crop; int hwsbase, hwebase, vwsbase, vwebase, hwscale, vwscale; int ret, hstart, hstop, vstop, vstart; __u8 v; gspca_dev = &sd->gspca_dev; - qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; + qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1; + crop = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 2; /* The different sensor ICs handle setting up of window differently. * IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!! */ @@ -1761,10 +2703,20 @@ static int set_ov_sensor_window(struct sd *sd) break; case SEN_OV6620: case SEN_OV6630: + case SEN_OV66308AF: hwsbase = 0x38; hwebase = 0x3a; vwsbase = 0x05; vwebase = 0x06; + if (sd->sensor == SEN_OV66308AF && qvga) + /* HDG: this fixes U and V getting swapped */ + hwsbase++; + if (crop) { + hwsbase += 8; + hwebase += 8; + vwsbase += 11; + vwebase += 11; + } break; case SEN_OV7620: hwsbase = 0x2f; /* From 7620.SET (spec is wrong) */ @@ -1788,6 +2740,7 @@ static int set_ov_sensor_window(struct sd *sd) switch (sd->sensor) { case SEN_OV6620: case SEN_OV6630: + case SEN_OV66308AF: if (qvga) { /* QCIF */ hwscale = 0; vwscale = 0; @@ -1840,7 +2793,7 @@ static int set_ov_sensor_window(struct sd *sd) if (qvga) { /* QVGA from ov7670.c by * Jonathan Corbet */ hstart = 164; - hstop = 20; + hstop = 28; vstart = 14; vstop = 494; } else { /* VGA */ @@ -1866,7 +2819,6 @@ static int set_ov_sensor_window(struct sd *sd) msleep(10); /* need to sleep between read and write to * same reg! */ i2c_w(sd, OV7670_REG_VREF, v); - sethvflip(sd); } else { i2c_w(sd, 0x17, hwsbase); i2c_w(sd, 0x18, hwebase + (sd->gspca_dev.width >> hwscale)); @@ -1880,15 +2832,35 @@ static int set_ov_sensor_window(struct sd *sd) static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - int ret; + int ret = 0; - ret = ov519_mode_init_regs(sd); + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + ret = ov511_mode_init_regs(sd); + break; + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + ret = ov518_mode_init_regs(sd); + break; + case BRIDGE_OV519: + ret = ov519_mode_init_regs(sd); + break; + } if (ret < 0) goto out; + ret = set_ov_sensor_window(sd); if (ret < 0) goto out; + setcontrast(gspca_dev); + setbrightness(gspca_dev); + setcolors(gspca_dev); + sethvflip(sd); + setautobrightness(sd); + setfreq(sd); + ret = ov51x_restart(sd); if (ret < 0) goto out; @@ -1907,7 +2879,95 @@ static void sd_stopN(struct gspca_dev *gspca_dev) ov51x_led_control(sd, 0); } -static void sd_pkt_scan(struct gspca_dev *gspca_dev, +static void ov511_pkt_scan(struct gspca_dev *gspca_dev, + struct gspca_frame *frame, /* target */ + __u8 *in, /* isoc packet */ + int len) /* iso packet length */ +{ + struct sd *sd = (struct sd *) gspca_dev; + + /* SOF/EOF packets have 1st to 8th bytes zeroed and the 9th + * byte non-zero. The EOF packet has image width/height in the + * 10th and 11th bytes. The 9th byte is given as follows: + * + * bit 7: EOF + * 6: compression enabled + * 5: 422/420/400 modes + * 4: 422/420/400 modes + * 3: 1 + * 2: snapshot button on + * 1: snapshot frame + * 0: even/odd field + */ + if (!(in[0] | in[1] | in[2] | in[3] | in[4] | in[5] | in[6] | in[7]) && + (in[8] & 0x08)) { + if (in[8] & 0x80) { + /* Frame end */ + if ((in[9] + 1) * 8 != gspca_dev->width || + (in[10] + 1) * 8 != gspca_dev->height) { + PDEBUG(D_ERR, "Invalid frame size, got: %dx%d," + " requested: %dx%d\n", + (in[9] + 1) * 8, (in[10] + 1) * 8, + gspca_dev->width, gspca_dev->height); + gspca_dev->last_packet_type = DISCARD_PACKET; + return; + } + /* Add 11 byte footer to frame, might be usefull */ + gspca_frame_add(gspca_dev, LAST_PACKET, frame, in, 11); + return; + } else { + /* Frame start */ + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, in, 0); + sd->packet_nr = 0; + } + } + + /* Ignore the packet number */ + len--; + + /* intermediate packet */ + gspca_frame_add(gspca_dev, INTER_PACKET, frame, in, len); +} + +static void ov518_pkt_scan(struct gspca_dev *gspca_dev, + struct gspca_frame *frame, /* target */ + __u8 *data, /* isoc packet */ + int len) /* iso packet length */ +{ + struct sd *sd = (struct sd *) gspca_dev; + + /* A false positive here is likely, until OVT gives me + * the definitive SOF/EOF format */ + if ((!(data[0] | data[1] | data[2] | data[3] | data[5])) && data[6]) { + gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0); + sd->packet_nr = 0; + } + + if (gspca_dev->last_packet_type == DISCARD_PACKET) + return; + + /* Does this device use packet numbers ? */ + if (len & 7) { + len--; + if (sd->packet_nr == data[len]) + sd->packet_nr++; + /* The last few packets of the frame (which are all 0's + except that they may contain part of the footer), are + numbered 0 */ + else if (sd->packet_nr == 0 || data[len]) { + PDEBUG(D_ERR, "Invalid packet nr: %d (expect: %d)", + (int)data[len], (int)sd->packet_nr); + gspca_dev->last_packet_type = DISCARD_PACKET; + return; + } + } + + /* intermediate packet */ + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); +} + +static void ov519_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ __u8 *data, /* isoc packet */ int len) /* iso packet length */ @@ -1951,6 +3011,28 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, data, len); } +static void sd_pkt_scan(struct gspca_dev *gspca_dev, + struct gspca_frame *frame, /* target */ + __u8 *data, /* isoc packet */ + int len) /* iso packet length */ +{ + struct sd *sd = (struct sd *) gspca_dev; + + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + ov511_pkt_scan(gspca_dev, frame, data, len); + break; + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + ov518_pkt_scan(gspca_dev, frame, data, len); + break; + case BRIDGE_OV519: + ov519_pkt_scan(gspca_dev, frame, data, len); + break; + } +} + /* -- management routines -- */ static void setbrightness(struct gspca_dev *gspca_dev) @@ -1965,13 +3047,13 @@ static void setbrightness(struct gspca_dev *gspca_dev) case SEN_OV76BE: case SEN_OV6620: case SEN_OV6630: + case SEN_OV66308AF: case SEN_OV7640: i2c_w(sd, OV7610_REG_BRT, val); break; case SEN_OV7620: /* 7620 doesn't like manual changes when in auto mode */ -/*fixme - * if (!sd->auto_brt) */ + if (!sd->autobrightness) i2c_w(sd, OV7610_REG_BRT, val); break; case SEN_OV7670: @@ -1994,7 +3076,9 @@ static void setcontrast(struct gspca_dev *gspca_dev) i2c_w(sd, OV7610_REG_CNT, val); break; case SEN_OV6630: + case SEN_OV66308AF: i2c_w_mask(sd, OV7610_REG_CNT, val >> 4, 0x0f); + break; case SEN_OV8610: { static const __u8 ctab[] = { 0x03, 0x09, 0x0b, 0x0f, 0x53, 0x6f, 0x35, 0x7f @@ -2037,6 +3121,7 @@ static void setcolors(struct gspca_dev *gspca_dev) case SEN_OV76BE: case SEN_OV6620: case SEN_OV6630: + case SEN_OV66308AF: i2c_w(sd, OV7610_REG_SAT, val); break; case SEN_OV7620: @@ -2057,6 +3142,72 @@ static void setcolors(struct gspca_dev *gspca_dev) } } +static void setautobrightness(struct sd *sd) +{ + if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670) + return; + + i2c_w_mask(sd, 0x2d, sd->autobrightness ? 0x10 : 0x00, 0x10); +} + +static void setfreq(struct sd *sd) +{ + if (sd->sensor == SEN_OV7670) { + switch (sd->freq) { + case 0: /* Banding filter disabled */ + i2c_w_mask(sd, OV7670_REG_COM8, 0, OV7670_COM8_BFILT); + break; + case 1: /* 50 hz */ + i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT, + OV7670_COM8_BFILT); + i2c_w_mask(sd, OV7670_REG_COM11, 0x08, 0x18); + break; + case 2: /* 60 hz */ + i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT, + OV7670_COM8_BFILT); + i2c_w_mask(sd, OV7670_REG_COM11, 0x00, 0x18); + break; + case 3: /* Auto hz */ + i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT, + OV7670_COM8_BFILT); + i2c_w_mask(sd, OV7670_REG_COM11, OV7670_COM11_HZAUTO, + 0x18); + break; + } + } else { + switch (sd->freq) { + case 0: /* Banding filter disabled */ + i2c_w_mask(sd, 0x2d, 0x00, 0x04); + i2c_w_mask(sd, 0x2a, 0x00, 0x80); + break; + case 1: /* 50 hz (filter on and framerate adj) */ + i2c_w_mask(sd, 0x2d, 0x04, 0x04); + i2c_w_mask(sd, 0x2a, 0x80, 0x80); + /* 20 fps -> 16.667 fps */ + if (sd->sensor == SEN_OV6620 || + sd->sensor == SEN_OV6630 || + sd->sensor == SEN_OV66308AF) + i2c_w(sd, 0x2b, 0x5e); + else + i2c_w(sd, 0x2b, 0xac); + break; + case 2: /* 60 hz (filter on, ...) */ + i2c_w_mask(sd, 0x2d, 0x04, 0x04); + if (sd->sensor == SEN_OV6620 || + sd->sensor == SEN_OV6630 || + sd->sensor == SEN_OV66308AF) { + /* 20 fps -> 15 fps */ + i2c_w_mask(sd, 0x2a, 0x80, 0x80); + i2c_w(sd, 0x2b, 0xa8); + } else { + /* no framerate adj. */ + i2c_w_mask(sd, 0x2a, 0x00, 0x80); + } + break; + } + } +} + static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; @@ -2147,6 +3298,71 @@ static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val) return 0; } +static int sd_setautobrightness(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->autobrightness = val; + if (gspca_dev->streaming) + setautobrightness(sd); + return 0; +} + +static int sd_getautobrightness(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->autobrightness; + return 0; +} + +static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->freq = val; + if (gspca_dev->streaming) + setfreq(sd); + return 0; +} + +static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->freq; + return 0; +} + +static int sd_querymenu(struct gspca_dev *gspca_dev, + struct v4l2_querymenu *menu) +{ + struct sd *sd = (struct sd *) gspca_dev; + + switch (menu->id) { + case V4L2_CID_POWER_LINE_FREQUENCY: + switch (menu->index) { + case 0: /* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */ + strcpy((char *) menu->name, "NoFliker"); + return 0; + case 1: /* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */ + strcpy((char *) menu->name, "50 Hz"); + return 0; + case 2: /* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */ + strcpy((char *) menu->name, "60 Hz"); + return 0; + case 3: + if (sd->sensor != SEN_OV7670) + return -EINVAL; + + strcpy((char *) menu->name, "Automatic"); + return 0; + } + break; + } + return -EINVAL; +} + /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, @@ -2157,23 +3373,31 @@ static const struct sd_desc sd_desc = { .start = sd_start, .stopN = sd_stopN, .pkt_scan = sd_pkt_scan, + .querymenu = sd_querymenu, }; /* -- module initialisation -- */ static const __devinitdata struct usb_device_id device_table[] = { - {USB_DEVICE(0x041e, 0x4052)}, - {USB_DEVICE(0x041e, 0x405f)}, - {USB_DEVICE(0x041e, 0x4060)}, - {USB_DEVICE(0x041e, 0x4061)}, - {USB_DEVICE(0x041e, 0x4064)}, - {USB_DEVICE(0x041e, 0x4068)}, - {USB_DEVICE(0x045e, 0x028c)}, - {USB_DEVICE(0x054c, 0x0154)}, - {USB_DEVICE(0x054c, 0x0155)}, - {USB_DEVICE(0x05a9, 0x0519)}, - {USB_DEVICE(0x05a9, 0x0530)}, - {USB_DEVICE(0x05a9, 0x4519)}, - {USB_DEVICE(0x05a9, 0x8519)}, + {USB_DEVICE(0x041e, 0x4052), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x041e, 0x4064), + .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, + {USB_DEVICE(0x041e, 0x4068), + .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, + {USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x054c, 0x0154), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x054c, 0x0155), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0x0511), .driver_info = BRIDGE_OV511 }, + {USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 }, + {USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0x0530), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0x4519), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0x8519), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0xa511), .driver_info = BRIDGE_OV511PLUS }, + {USB_DEVICE(0x05a9, 0xa518), .driver_info = BRIDGE_OV518PLUS }, + {USB_DEVICE(0x0813, 0x0002), .driver_info = BRIDGE_OV511PLUS }, {} }; diff --git a/linux/drivers/media/video/gspca/ov534.c b/linux/drivers/media/video/gspca/ov534.c index 1e00e46b1..21a9366c7 100644 --- a/linux/drivers/media/video/gspca/ov534.c +++ b/linux/drivers/media/video/gspca/ov534.c @@ -60,10 +60,23 @@ struct sd { static struct ctrl sd_ctrls[] = { }; -static const struct v4l2_pix_format vga_mode[] = { +static const struct v4l2_pix_format vga_yuyv_mode[] = { {640, 480, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE, .bytesperline = 640 * 2, .sizeimage = 640 * 480 * 2, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0}, +}; + +static const struct v4l2_pix_format vga_jpeg_mode[] = { + {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3 / 8 + 590, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1}, + {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480 * 3 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 0}, }; @@ -244,7 +257,7 @@ static const u8 bridge_init_ov965x[][2] = { }; static const u8 sensor_init_ov965x[][2] = { - {0x12, 0x80}, /* com7 - reset */ + {0x12, 0x80}, /* com7 - SSCB reset */ {0x00, 0x00}, /* gain */ {0x01, 0x80}, /* blue */ {0x02, 0x80}, /* red */ @@ -254,10 +267,10 @@ static const u8 sensor_init_ov965x[][2] = { {0x0e, 0x61}, /* com5 */ {0x0f, 0x42}, /* com6 */ {0x11, 0x00}, /* clkrc */ - {0x12, 0x02}, /* com7 */ + {0x12, 0x02}, /* com7 - 15fps VGA YUYV */ {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */ {0x14, 0x28}, /* com9 */ - {0x16, 0x24}, /* rsvd16 */ + {0x16, 0x24}, /* reg16 */ {0x17, 0x1d}, /* hstart*/ {0x18, 0xbd}, /* hstop */ {0x19, 0x01}, /* vstrt */ @@ -269,24 +282,24 @@ static const u8 sensor_init_ov965x[][2] = { {0x27, 0x08}, /* bbias */ {0x28, 0x08}, /* gbbias */ {0x29, 0x15}, /* gr com */ - {0x2a, 0x00}, - {0x2b, 0x00}, + {0x2a, 0x00}, /* exhch */ + {0x2b, 0x00}, /* exhcl */ {0x2c, 0x08}, /* rbias */ {0x32, 0xff}, /* href */ {0x33, 0x00}, /* chlf */ - {0x34, 0x3f}, /* arblm */ - {0x35, 0x00}, /* rsvd35 */ - {0x36, 0xf8}, /* rsvd36 */ - {0x38, 0x72}, /* acom38 */ - {0x39, 0x57}, /* ofon */ - {0x3a, 0x80}, /* tslb */ - {0x3b, 0xc4}, + {0x34, 0x3f}, /* aref1 */ + {0x35, 0x00}, /* aref2 */ + {0x36, 0xf8}, /* aref3 */ + {0x38, 0x72}, /* adc2 */ + {0x39, 0x57}, /* aref4 */ + {0x3a, 0x80}, /* tslb - yuyv */ + {0x3b, 0xc4}, /* com11 - night mode 1/4 frame rate */ {0x3d, 0x99}, /* com13 */ - {0x3f, 0xc1}, + {0x3f, 0xc1}, /* edge */ {0x40, 0xc0}, /* com15 */ {0x41, 0x40}, /* com16 */ - {0x42, 0xc0}, - {0x43, 0x0a}, + {0x42, 0xc0}, /* com17 */ + {0x43, 0x0a}, /* rsvd */ {0x44, 0xf0}, {0x45, 0x46}, {0x46, 0x62}, @@ -297,22 +310,22 @@ static const u8 sensor_init_ov965x[][2] = { {0x4c, 0x7f}, {0x4d, 0x7f}, {0x4e, 0x7f}, - {0x4f, 0x98}, + {0x4f, 0x98}, /* matrix */ {0x50, 0x98}, {0x51, 0x00}, {0x52, 0x28}, {0x53, 0x70}, {0x54, 0x98}, - {0x58, 0x1a}, - {0x59, 0x85}, + {0x58, 0x1a}, /* matrix coef sign */ + {0x59, 0x85}, /* AWB control */ {0x5a, 0xa9}, {0x5b, 0x64}, {0x5c, 0x84}, {0x5d, 0x53}, {0x5e, 0x0e}, - {0x5f, 0xf0}, - {0x60, 0xf0}, - {0x61, 0xf0}, + {0x5f, 0xf0}, /* AWB blue limit */ + {0x60, 0xf0}, /* AWB red limit */ + {0x61, 0xf0}, /* AWB green limit */ {0x62, 0x00}, /* lcc1 */ {0x63, 0x00}, /* lcc2 */ {0x64, 0x02}, /* lcc3 */ @@ -324,15 +337,15 @@ static const u8 sensor_init_ov965x[][2] = { {0x6d, 0x55}, {0x6e, 0x00}, {0x6f, 0x9d}, - {0x70, 0x21}, + {0x70, 0x21}, /* dnsth */ {0x71, 0x78}, - {0x72, 0x00}, - {0x73, 0x01}, - {0x74, 0x3a}, - {0x75, 0x35}, + {0x72, 0x00}, /* poidx */ + {0x73, 0x01}, /* pckdv */ + {0x74, 0x3a}, /* xindx */ + {0x75, 0x35}, /* yindx */ {0x76, 0x01}, {0x77, 0x02}, - {0x7a, 0x12}, + {0x7a, 0x12}, /* gamma curve */ {0x7b, 0x08}, {0x7c, 0x16}, {0x7d, 0x30}, @@ -349,33 +362,33 @@ static const u8 sensor_init_ov965x[][2] = { {0x88, 0xe6}, {0x89, 0xf2}, {0x8a, 0x03}, - {0x8c, 0x89}, + {0x8c, 0x89}, /* com19 */ {0x14, 0x28}, /* com9 */ {0x90, 0x7d}, {0x91, 0x7b}, - {0x9d, 0x03}, - {0x9e, 0x04}, + {0x9d, 0x03}, /* lcc6 */ + {0x9e, 0x04}, /* lcc7 */ {0x9f, 0x7a}, {0xa0, 0x79}, {0xa1, 0x40}, /* aechm */ - {0xa4, 0x50}, + {0xa4, 0x50}, /* com21 */ {0xa5, 0x68}, /* com26 */ - {0xa6, 0x4a}, - {0xa8, 0xc1}, /* acoma8 */ - {0xa9, 0xef}, /* acoma9 */ + {0xa6, 0x4a}, /* AWB green */ + {0xa8, 0xc1}, /* refa8 */ + {0xa9, 0xef}, /* refa9 */ {0xaa, 0x92}, {0xab, 0x04}, - {0xac, 0x80}, + {0xac, 0x80}, /* black level control */ {0xad, 0x80}, {0xae, 0x80}, {0xaf, 0x80}, {0xb2, 0xf2}, {0xb3, 0x20}, - {0xb4, 0x20}, + {0xb4, 0x20}, /* ctrlb4 */ {0xb5, 0x00}, {0xb6, 0xaf}, {0xbb, 0xae}, - {0xbc, 0x7f}, + {0xbc, 0x7f}, /* ADC channel offsets */ {0xdb, 0x7f}, {0xbe, 0x7f}, {0xbf, 0x7f}, @@ -384,7 +397,7 @@ static const u8 sensor_init_ov965x[][2] = { {0xc2, 0x01}, {0xc3, 0x4e}, {0xc6, 0x85}, - {0xc7, 0x80}, + {0xc7, 0x80}, /* com24 */ {0xc9, 0xe0}, {0xca, 0xe8}, {0xcb, 0xf0}, @@ -399,11 +412,11 @@ static const u8 sensor_init_ov965x[][2] = { {0x58, 0x1a}, {0xff, 0x41}, /* read 41, write ff 00 */ {0x41, 0x40}, /* com16 */ - {0xc5, 0x03}, - {0x6a, 0x02}, + {0xc5, 0x03}, /* 60 Hz banding filter */ + {0x6a, 0x02}, /* 50 Hz banding filter */ - {0x12, 0x62}, /* com7 - VGA + CIF */ - {0x36, 0xfa}, /* rsvd36 */ + {0x12, 0x62}, /* com7 - 30fps VGA YUV */ + {0x36, 0xfa}, /* aref3 */ {0x69, 0x0a}, /* hv */ {0x8c, 0x89}, /* com22 */ {0x14, 0x28}, /* com9 */ @@ -442,8 +455,8 @@ static const u8 bridge_init_ov965x_2[][2] = { {0x52, 0x3c}, {0x53, 0x00}, {0x54, 0x00}, - {0x55, 0x00}, - {0x57, 0x00}, + {0x55, 0x00}, /* brightness */ + {0x57, 0x00}, /* contrast 2 */ {0x5c, 0x00}, {0x5a, 0xa0}, {0x5b, 0x78}, @@ -489,8 +502,31 @@ static const u8 sensor_init_ov965x_2[][2] = { {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */ }; +static const u8 sensor_start_ov965x[][2] = { + {0x12, 0x62}, /* com7 - 30fps VGA YUV */ + {0x36, 0xfa}, /* aref3 */ + {0x69, 0x0a}, /* hv */ + {0x8c, 0x89}, /* com22 */ + {0x14, 0x28}, /* com9 */ + {0x3e, 0x0c}, /* com14 */ + {0x41, 0x40}, /* com16 */ + {0x72, 0x00}, + {0x73, 0x00}, + {0x74, 0x3a}, + {0x75, 0x35}, + {0x76, 0x01}, + {0xc7, 0x80}, /* com24 */ + {0x03, 0x12}, /* vref */ + {0x17, 0x16}, /* hstart */ + {0x18, 0x02}, /* hstop */ + {0x19, 0x01}, /* vstrt */ + {0x1a, 0x3d}, /* vstop */ + {0x32, 0xff}, /* href */ + {0xc0, 0xaa}, + {} +}; + static const u8 bridge_start_ov965x[][2] = { -#if 0 {0x94, 0xaa}, {0xf1, 0x60}, {0xe5, 0x04}, @@ -499,9 +535,33 @@ static const u8 bridge_start_ov965x[][2] = { {0x8c, 0x00}, {0x8d, 0x1c}, {0x34, 0x05}, -#endif + {} +}; + +static const u8 bridge_start_ov965x_vga[][2] = { + {0xc2, 0x0c}, + {0xc3, 0xf9}, + {0xda, 0x01}, + {0x50, 0x00}, + {0x51, 0xa0}, + {0x52, 0x3c}, + {0x53, 0x00}, + {0x54, 0x00}, + {0x55, 0x00}, + {0x57, 0x00}, + {0x5c, 0x00}, + {0x5a, 0xa0}, + {0x5b, 0x78}, + {0x35, 0x02}, + {0xd9, 0x10}, + {0x94, 0x11}, + {} +}; + +static const u8 bridge_start_ov965x_cif[][2] = { {0xc2, 0x4c}, {0xc3, 0xf9}, + {0xda, 0x00}, {0x50, 0x00}, {0x51, 0xa0}, {0x52, 0x78}, @@ -510,39 +570,64 @@ static const u8 bridge_start_ov965x[][2] = { {0x55, 0x00}, {0x57, 0x00}, {0x5c, 0x00}, - {0x5a, 0x28}, - {0x5b, 0x1e}, - {0x35, 0x00}, - {0xd9, 0x21}, + {0x5a, 0x50}, + {0x5b, 0x3c}, + {0x35, 0x02}, + {0xd9, 0x10}, {0x94, 0x11}, + {} }; -static const u8 sensor_start_ov965x[][2] = { - {0x3b, 0xe4}, +static const u8 sensor_start_ov965x_vga[][2] = { + {0x3b, 0xc4}, /* com11 - night mode 1/4 frame rate */ + {0x1e, 0x04}, /* mvfp */ + {0x13, 0xe0}, /* com8 */ + {0x00, 0x00}, + {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */ + {0x11, 0x03}, /* clkrc */ + {0x6b, 0x5a}, /* dblv */ + {0x6a, 0x05}, /* 50 Hz banding filter */ + {0xc5, 0x07}, /* 60 Hz banding filter */ + {0xa2, 0x4b}, /* bd50 */ + {0xa3, 0x3e}, /* bd60 */ + + {0x2d, 0x00}, /* advfl */ + {} +}; + +static const u8 sensor_start_ov965x_cif[][2] = { + {0x3b, 0xe4}, /* com11 - night mode 1/4 frame rate */ {0x1e, 0x04}, /* mvfp */ {0x13, 0xe0}, /* com8 */ {0x00, 0x00}, {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */ {0x11, 0x01}, /* clkrc */ {0x6b, 0x5a}, /* dblv */ - {0x6a, 0x02}, - {0xc5, 0x03}, - {0xa2, 0x96}, - {0xa3, 0x7d}, + {0x6a, 0x02}, /* 50 Hz banding filter */ + {0xc5, 0x03}, /* 60 Hz banding filter */ + {0xa2, 0x96}, /* bd50 */ + {0xa3, 0x7d}, /* bd60 */ + {0xff, 0x13}, /* read 13, write ff 00 */ {0x13, 0xe7}, - {0x3a, 0x80}, + {0x3a, 0x80}, /* tslb - yuyv */ + {} +}; + +static const u8 sensor_start_ov965x_2[][2] = { {0xff, 0x42}, /* read 42, write ff 00 */ - {0x42, 0xc1}, + {0x42, 0xc1}, /* com17 - 50 Hz filter */ + {} }; #if 0 -static const u8 sensor_start_ov965x_2[][2] = { +static const u8 sensor_start_ov965x_3[][2] = { {0xff, 0x13}, /* read 13, write ff 00 */ {0x13, 0xe7}, {0x3a, 0x80}, {0xff, 0x42}, /* read 42, write ff 00 */ {0x42, 0xc1}, + {} }; #endif @@ -724,13 +809,16 @@ static int sd_config(struct gspca_dev *gspca_dev, cam = &gspca_dev->cam; - cam->cam_mode = vga_mode; - cam->nmodes = ARRAY_SIZE(vga_mode); - if (sd->sensor == SENSOR_OV772X) { + cam->cam_mode = vga_yuyv_mode; + cam->nmodes = ARRAY_SIZE(vga_yuyv_mode); + cam->bulk = 1; cam->bulk_size = 16384; cam->bulk_nurbs = 2; + } else { /* ov965x */ + cam->cam_mode = vga_jpeg_mode; + cam->nmodes = ARRAY_SIZE(vga_jpeg_mode); } return 0; @@ -800,6 +888,7 @@ static int sd_init(struct gspca_dev *gspca_dev) static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + int mode; switch (sd->sensor) { case SENSOR_OV772X: @@ -808,17 +897,28 @@ static int sd_start(struct gspca_dev *gspca_dev) break; default: /* case SENSOR_OV965X: */ -#if 0 - sccb_w_array(gspca_dev, sensor_init_ov965x, - ARRAY_SIZE(sensor_init_ov965x)); -#endif - reg_w_array(gspca_dev, bridge_start_ov965x, - ARRAY_SIZE(bridge_start_ov965x)); + sccb_w_array(gspca_dev, sensor_start_ov965x, ARRAY_SIZE(sensor_start_ov965x)); + reg_w_array(gspca_dev, bridge_start_ov965x, + ARRAY_SIZE(bridge_start_ov965x)); + mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; + if (mode != 0) { /* 320x240 */ + reg_w_array(gspca_dev, bridge_start_ov965x_cif, + ARRAY_SIZE(bridge_start_ov965x_cif)); + sccb_w_array(gspca_dev, sensor_start_ov965x_cif, + ARRAY_SIZE(sensor_start_ov965x_cif)); + } else { /* 640x480 */ + reg_w_array(gspca_dev, bridge_start_ov965x_vga, + ARRAY_SIZE(bridge_start_ov965x_vga)); + sccb_w_array(gspca_dev, sensor_start_ov965x_vga, + ARRAY_SIZE(sensor_start_ov965x_vga)); + } + sccb_w_array(gspca_dev, sensor_start_ov965x_2, + ARRAY_SIZE(sensor_start_ov965x_2)); + ov534_reg_write(gspca_dev, 0xe0, 0x00); ov534_reg_write(gspca_dev, 0xe0, 0x00); ov534_set_led(gspca_dev, 1); -/*fixme: other sensor start omitted*/ } return 0; } @@ -858,9 +958,11 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, __u32 this_pts; u16 this_fid; int remaining_len = len; + int payload_len; + payload_len = gspca_dev->cam.bulk ? 2048 : 2040; do { - len = min(remaining_len, 2040); /*fixme: was 2048*/ + len = min(remaining_len, payload_len); /* Payloads are prefixed with a UVC-style header. We consider a frame to start when the FID toggles, or the PTS @@ -901,12 +1003,14 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* If this packet is marked as EOF, end the frame */ } else if (data[1] & UVC_STREAM_EOF) { sd->last_pts = 0; - +#if 0 +/*fixme: check if not jpeg*/ if (frame->data_end - frame->data != gspca_dev->width * gspca_dev->height * 2) { PDEBUG(D_PACK, "short frame"); goto discard; } +#endif frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, data + 12, len - 12); } else { diff --git a/linux/drivers/media/video/gspca/sonixj.c b/linux/drivers/media/video/gspca/sonixj.c index a4c935d69..a2fb94eb7 100644 --- a/linux/drivers/media/video/gspca/sonixj.c +++ b/linux/drivers/media/video/gspca/sonixj.c @@ -46,6 +46,7 @@ struct sd { u8 gamma; u8 vflip; /* ov7630/ov7648 only */ u8 infrared; /* mt9v111 only */ + u8 freq; /* ov76xx only */ u8 quality; /* image quality */ #define QUALITY_MIN 60 #define QUALITY_MAX 95 @@ -96,8 +97,11 @@ static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setinfrared(struct gspca_dev *gspca_dev, __s32 val); static int sd_getinfrared(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val); static struct ctrl sd_ctrls[] = { +#define BRIGHTNESS_IDX 0 { { .id = V4L2_CID_BRIGHTNESS, @@ -113,6 +117,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setbrightness, .get = sd_getbrightness, }, +#define CONTRAST_IDX 1 { { .id = V4L2_CID_CONTRAST, @@ -128,20 +133,22 @@ static struct ctrl sd_ctrls[] = { .set = sd_setcontrast, .get = sd_getcontrast, }, +#define COLOR_IDX 2 { { .id = V4L2_CID_SATURATION, .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Color", + .name = "Saturation", .minimum = 0, .maximum = 40, .step = 1, -#define COLOR_DEF 32 +#define COLOR_DEF 25 .default_value = COLOR_DEF, }, .set = sd_setcolors, .get = sd_getcolors, }, +#define BLUE_BALANCE_IDX 3 { { .id = V4L2_CID_BLUE_BALANCE, @@ -156,6 +163,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setblue_balance, .get = sd_getblue_balance, }, +#define RED_BALANCE_IDX 4 { { .id = V4L2_CID_RED_BALANCE, @@ -170,6 +178,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setred_balance, .get = sd_getred_balance, }, +#define GAMMA_IDX 5 { { .id = V4L2_CID_GAMMA, @@ -184,7 +193,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setgamma, .get = sd_getgamma, }, -#define AUTOGAIN_IDX 5 +#define AUTOGAIN_IDX 6 { { .id = V4L2_CID_AUTOGAIN, @@ -200,7 +209,7 @@ static struct ctrl sd_ctrls[] = { .get = sd_getautogain, }, /* ov7630/ov7648 only */ -#define VFLIP_IDX 6 +#define VFLIP_IDX 7 { { .id = V4L2_CID_VFLIP, @@ -209,14 +218,14 @@ static struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define VFLIP_DEF 0 /* vflip def = 1 for ov7630 */ +#define VFLIP_DEF 0 .default_value = VFLIP_DEF, }, .set = sd_setvflip, .get = sd_getvflip, }, /* mt9v111 only */ -#define INFRARED_IDX 7 +#define INFRARED_IDX 8 { { .id = V4L2_CID_INFRARED, @@ -231,32 +240,48 @@ static struct ctrl sd_ctrls[] = { .set = sd_setinfrared, .get = sd_getinfrared, }, +/* ov7630/ov7648/ov7660 only */ +#define FREQ_IDX 9 + { + { + .id = V4L2_CID_POWER_LINE_FREQUENCY, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Light frequency filter", + .minimum = 0, + .maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */ + .step = 1, +#define FREQ_DEF 2 + .default_value = FREQ_DEF, + }, + .set = sd_setfreq, + .get = sd_getfreq, + }, }; /* table of the disabled controls */ static __u32 ctrl_dis[] = { - (1 << INFRARED_IDX) | (1 << VFLIP_IDX), + (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX), /* SENSOR_HV7131R 0 */ - (1 << INFRARED_IDX) | (1 << VFLIP_IDX), + (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX), /* SENSOR_MI0360 1 */ - (1 << INFRARED_IDX) | (1 << VFLIP_IDX), + (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX), /* SENSOR_MO4000 2 */ #if 1 - (1 << VFLIP_IDX), + (1 << VFLIP_IDX) | (1 << FREQ_IDX), #else - (1 << AUTOGAIN_IDX) | (1 << VFLIP_IDX), + (1 << AUTOGAIN_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX), #endif /* SENSOR_MT9V111 3 */ - (1 << INFRARED_IDX) | (1 << VFLIP_IDX), + (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | (1 << FREQ_IDX), /* SENSOR_OM6802 4 */ - (1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX), + (1 << INFRARED_IDX), /* SENSOR_OV7630 5 */ (1 << INFRARED_IDX), /* SENSOR_OV7648 6 */ (1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX), /* SENSOR_OV7660 7 */ - (1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX), - /* SENSOR_SP80708 8 */ + (1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX) | + (1 << FREQ_IDX), /* SENSOR_SP80708 8 */ }; static const struct v4l2_pix_format vga_mode[] = { @@ -272,7 +297,8 @@ static const struct v4l2_pix_format vga_mode[] = { .priv = 1}, {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 640, - .sizeimage = 640 * 480 * 3 / 8 + 590, + /* Note 3 / 8 is not large enough, not even 5 / 8 is ?! */ + .sizeimage = 640 * 480 * 3 / 4 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 0}, }; @@ -612,7 +638,9 @@ static const u8 ov7630_sensor_init[][8] = { /* win: i2c_r from 00 to 80 */ {0xd1, 0x21, 0x03, 0x80, 0x10, 0x20, 0x80, 0x10}, {0xb1, 0x21, 0x0c, 0x20, 0x20, 0x00, 0x00, 0x10}, - {0xd1, 0x21, 0x11, 0x00, 0x48, 0xc0, 0x00, 0x10}, +/* HDG: 0x11 was 0x00 change to 0x01 for better exposure (15 fps instead of 30) + 0x13 was 0xc0 change to 0xc3 for auto gain and exposure */ + {0xd1, 0x21, 0x11, 0x01, 0x48, 0xc3, 0x00, 0x10}, {0xb1, 0x21, 0x15, 0x80, 0x03, 0x00, 0x00, 0x10}, {0xd1, 0x21, 0x17, 0x1b, 0xbd, 0x05, 0xf6, 0x10}, {0xa1, 0x21, 0x1b, 0x04, 0x00, 0x00, 0x00, 0x10}, @@ -646,9 +674,8 @@ static const u8 ov7630_sensor_init[][8] = { {0xa1, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10}, {0xb1, 0x21, 0x01, 0x80, 0x80, 0x00, 0x00, 0x10}, /* */ - {0xa1, 0x21, 0x11, 0x00, 0x00, 0x00, 0x00, 0x10}, - {0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10}, - {0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10}, +/* {0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10}, * set by setfreq */ +/* {0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10}, * set by setfreq */ /* */ {0xa1, 0x21, 0x10, 0x83, 0x00, 0x00, 0x00, 0x10}, /* {0xb1, 0x21, 0x01, 0x88, 0x70, 0x00, 0x00, 0x10}, */ @@ -681,7 +708,7 @@ static const u8 ov7648_sensor_init[][8] = { {0xd1, 0x21, 0x21, 0x86, 0x00, 0xde, 0xa0, 0x10}, /* {0xd1, 0x21, 0x25, 0x80, 0x32, 0xfe, 0xa0, 0x10}, jfm done */ /* {0xd1, 0x21, 0x29, 0x00, 0x91, 0x00, 0x88, 0x10}, jfm done */ - {0xb1, 0x21, 0x2d, 0x85, 0x00, 0x00, 0x00, 0x10}, +/* {0xb1, 0x21, 0x2d, 0x85, 0x00, 0x00, 0x00, 0x10}, set by setfreq */ /*...*/ /* {0xa1, 0x21, 0x12, 0x08, 0x00, 0x00, 0x00, 0x10}, jfm done */ /* {0xa1, 0x21, 0x75, 0x06, 0x00, 0x00, 0x00, 0x10}, * COMN @@ -1310,11 +1337,9 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->gamma = GAMMA_DEF; sd->autogain = AUTOGAIN_DEF; sd->ag_cnt = -1; - if (sd->sensor != SENSOR_OV7630) - sd->vflip = 0; - else - sd->vflip = 1; + sd->vflip = VFLIP_DEF; sd->infrared = INFRARED_DEF; + sd->freq = FREQ_DEF; sd->quality = QUALITY_DEF; sd->jpegqual = 80; @@ -1595,7 +1620,7 @@ static void setautogain(struct gspca_dev *gspca_dev) else comb = 0xa0; if (sd->autogain) - comb |= 0x02; + comb |= 0x03; i2c_w1(&sd->gspca_dev, 0x13, comb); return; } @@ -1611,12 +1636,15 @@ static void setvflip(struct sd *sd) { u8 comn; - if (sd->sensor == SENSOR_OV7630) + if (sd->sensor == SENSOR_OV7630) { comn = 0x02; - else + if (!sd->vflip) + comn |= 0x80; + } else { comn = 0x06; - if (sd->vflip) - comn |= 0x80; + if (sd->vflip) + comn |= 0x80; + } i2c_w1(&sd->gspca_dev, 0x75, comn); } @@ -1634,6 +1662,58 @@ static void setinfrared(struct sd *sd) #endif } +static void setfreq(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->sensor == SENSOR_OV7660) { + switch (sd->freq) { + case 0: /* Banding filter disabled */ + i2c_w1(gspca_dev, 0x13, 0xdf); + break; + case 1: /* 50 hz */ + i2c_w1(gspca_dev, 0x13, 0xff); + i2c_w1(gspca_dev, 0x3b, 0x0a); + break; + case 2: /* 60 hz */ + i2c_w1(gspca_dev, 0x13, 0xff); + i2c_w1(gspca_dev, 0x3b, 0x02); + break; + } + } else { + u8 reg2a = 0, reg2b = 0, reg2d = 0; + + /* Get reg2a / reg2d base values */ + switch (sd->sensor) { + case SENSOR_OV7630: + reg2a = 0x08; + reg2d = 0x01; + break; + case SENSOR_OV7648: + reg2a = 0x11; + reg2d = 0x81; + break; + } + + switch (sd->freq) { + case 0: /* Banding filter disabled */ + break; + case 1: /* 50 hz (filter on and framerate adj) */ + reg2a |= 0x80; + reg2b = 0xac; + reg2d |= 0x04; + break; + case 2: /* 60 hz (filter on, no framerate adj) */ + reg2a |= 0x80; + reg2d |= 0x04; + break; + } + i2c_w1(gspca_dev, 0x2a, reg2a); + i2c_w1(gspca_dev, 0x2b, reg2b); + i2c_w1(gspca_dev, 0x2d, reg2d); + } +} + static void setjpegqual(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -1865,6 +1945,7 @@ static int sd_start(struct gspca_dev *gspca_dev) setbrightness(gspca_dev); setcontrast(gspca_dev); setautogain(gspca_dev); + setfreq(gspca_dev); return 0; } @@ -2168,6 +2249,24 @@ static int sd_getinfrared(struct gspca_dev *gspca_dev, __s32 *val) return 0; } +static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->freq = val; + if (gspca_dev->streaming) + setfreq(gspca_dev); + return 0; +} + +static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->freq; + return 0; +} + static int sd_set_jcomp(struct gspca_dev *gspca_dev, struct v4l2_jpegcompression *jcomp) { @@ -2196,6 +2295,27 @@ static int sd_get_jcomp(struct gspca_dev *gspca_dev, return 0; } +static int sd_querymenu(struct gspca_dev *gspca_dev, + struct v4l2_querymenu *menu) +{ + switch (menu->id) { + case V4L2_CID_POWER_LINE_FREQUENCY: + switch (menu->index) { + case 0: /* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */ + strcpy((char *) menu->name, "NoFliker"); + return 0; + case 1: /* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */ + strcpy((char *) menu->name, "50 Hz"); + return 0; + case 2: /* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */ + strcpy((char *) menu->name, "60 Hz"); + return 0; + } + break; + } + return -EINVAL; +} + /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, @@ -2210,6 +2330,7 @@ static const struct sd_desc sd_desc = { .dq_callback = do_autogain, .get_jcomp = sd_get_jcomp, .set_jcomp = sd_set_jcomp, + .querymenu = sd_querymenu, }; /* -- module initialisation -- */ @@ -2270,7 +2391,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x613b), BSI(SN9C120, OV7660, 0x21)}, #endif {USB_DEVICE(0x0c45, 0x613c), BSI(SN9C120, HV7131R, 0x11)}, -/* {USB_DEVICE(0x0c45, 0x613e), BSI(SN9C120, OV7630, 0x??)}, */ + {USB_DEVICE(0x0c45, 0x613e), BSI(SN9C120, OV7630, 0x21)}, {USB_DEVICE(0x0c45, 0x6143), BSI(SN9C120, SP80708, 0x18)}, {} }; diff --git a/linux/drivers/media/video/gspca/spca505.c b/linux/drivers/media/video/gspca/spca505.c index 2acec58b1..ea8c9fe2e 100644 --- a/linux/drivers/media/video/gspca/spca505.c +++ b/linux/drivers/media/video/gspca/spca505.c @@ -637,19 +637,19 @@ static int sd_config(struct gspca_dev *gspca_dev, cam->nmodes = ARRAY_SIZE(vga_mode) - 1; sd->brightness = BRIGHTNESS_DEF; - if (sd->subtype == Nxultra) { - if (write_vector(gspca_dev, spca505b_init_data)) - return -EIO; - } else { - if (write_vector(gspca_dev, spca505_init_data)) - return -EIO; - } return 0; } /* this function is called at probe and resume time */ static int sd_init(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; + + if (write_vector(gspca_dev, + sd->subtype == Nxultra + ? spca505b_init_data + : spca505_init_data)) + return -EIO; return 0; } diff --git a/linux/drivers/media/video/gspca/spca508.c b/linux/drivers/media/video/gspca/spca508.c index e3afc9e7f..7fd8079c2 100644 --- a/linux/drivers/media/video/gspca/spca508.c +++ b/linux/drivers/media/video/gspca/spca508.c @@ -1,7 +1,7 @@ /* * SPCA508 chip based cameras subdriver * - * V4L2 by Jean-Francois Moine <http://moinejf.free.fr> + * Copyright (C) 2009 Jean-Francois Moine <http://moinejf.free.fr> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -30,9 +30,9 @@ MODULE_LICENSE("GPL"); struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ - unsigned char brightness; + u8 brightness; - char subtype; + u8 subtype; #define CreativeVista 0 #define HamaUSBSightcam 1 #define HamaUSBSightcam2 2 @@ -86,58 +86,54 @@ static const struct v4l2_pix_format sif_mode[] = { }; /* Frame packet header offsets for the spca508 */ +#if 0 +#define SPCA508_OFFSET_ #define SPCA508_OFFSET_TYPE 1 +#define SPCA508_IMAGE_TYPE_MASK 0x1f +#define SPCA508_SNAPBIT 0x20 +#define SPCA508_SNAPCTRL 0x40 #define SPCA508_OFFSET_COMPRESS 2 #define SPCA508_OFFSET_FRAMSEQ 8 +#define SPCA508_OFFSET_GPIO 9 +#define SPCA508_OFFSET_GLBINF 10 #define SPCA508_OFFSET_WIN1LUM 11 +#define SPCA508_OFFSET_WIN2LUM 12 +#define SPCA508_OFFSET_WIN1RG 13 +#define SPCA508_OFFSET_WIN1BG 14 +#define SPCA508_OFFSET_WIN2RG 15 +#define SPCA508_OFFSET_WIN2BG 16 +#define SPCA508_OFFSET_21 21 +#define SPCA508_GAMMAEN 0x01 +#define SPCA508_EDGEMODE 0x02 +#endif #define SPCA508_OFFSET_DATA 37 -#define SPCA508_SNAPBIT 0x20 -#define SPCA508_SNAPCTRL 0x40 -/*************** I2c ****************/ -#define SPCA508_INDEX_I2C_BASE 0x8800 - /* * Initialization data: this is the first set-up data written to the * device (before the open data). */ static const u16 spca508_init_data[][2] = { - /* line URB value, index */ - /* 44274 1804 */ {0x0000, 0x870b}, - - /* 44299 1805 */ {0x0020, 0x8112}, - /* Video drop enable, ISO streaming disable */ - /* 44324 1806 */ {0x0003, 0x8111}, - /* Reset compression & memory */ - /* 44349 1807 */ {0x0000, 0x8110}, - /* Disable all outputs */ - /* 44372 1808 */ /* READ {0x0000, 0x8114} -> 0000: 00 */ - /* 44398 1809 */ {0x0000, 0x8114}, - /* SW GPIO data */ - /* 44423 1810 */ {0x0008, 0x8110}, - /* Enable charge pump output */ - /* 44527 1811 */ {0x0002, 0x8116}, - /* 200 kHz pump clock */ - /* 44555 1812 */ - /* UNKNOWN DIRECTION (URB_FUNCTION_SELECT_INTERFACE:) */ - /* 44590 1813 */ {0x0003, 0x8111}, - /* Reset compression & memory */ - /* 44615 1814 */ {0x0000, 0x8111}, - /* Normal mode (not reset) */ - /* 44640 1815 */ {0x0098, 0x8110}, - /* Enable charge pump output, sync.serial,external 2x clock */ - /* 44665 1816 */ {0x000d, 0x8114}, - /* SW GPIO data */ - /* 44690 1817 */ {0x0002, 0x8116}, - /* 200 kHz pump clock */ - /* 44715 1818 */ {0x0020, 0x8112}, - /* Video drop enable, ISO streaming disable */ + {0x0000, 0x870b}, + + {0x0020, 0x8112}, /* Video drop enable, ISO streaming disable */ + {0x0003, 0x8111}, /* Reset compression & memory */ + {0x0000, 0x8110}, /* Disable all outputs */ + /* READ {0x0000, 0x8114} -> 0000: 00 */ + {0x0000, 0x8114}, /* SW GPIO data */ + {0x0008, 0x8110}, /* Enable charge pump output */ + {0x0002, 0x8116}, /* 200 kHz pump clock */ + /* UNKNOWN DIRECTION (URB_FUNCTION_SELECT_INTERFACE:) */ + {0x0003, 0x8111}, /* Reset compression & memory */ + {0x0000, 0x8111}, /* Normal mode (not reset) */ + {0x0098, 0x8110}, + /* Enable charge pump output, sync.serial,external 2x clock */ + {0x000d, 0x8114}, /* SW GPIO data */ + {0x0002, 0x8116}, /* 200 kHz pump clock */ + {0x0020, 0x8112}, /* Video drop enable, ISO streaming disable */ /* --------------------------------------- */ - /* 44740 1819 */ {0x000f, 0x8402}, - /* memory bank */ - /* 44765 1820 */ {0x0000, 0x8403}, - /* ... address */ + {0x000f, 0x8402}, /* memory bank */ + {0x0000, 0x8403}, /* ... address */ /* --------------------------------------- */ /* 0x88__ is Synchronous Serial Interface. */ /* TBD: This table could be expressed more compactly */ @@ -145,342 +141,307 @@ static const u16 spca508_init_data[][2] = /* TBD: Should see if the values in spca50x_i2c_data */ /* would work with the VQ110 instead of the values */ /* below. */ - /* 44790 1821 */ {0x00c0, 0x8804}, - /* SSI slave addr */ - /* 44815 1822 */ {0x0008, 0x8802}, - /* 375 Khz SSI clock */ - /* 44838 1823 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 44862 1824 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 44888 1825 */ {0x0008, 0x8802}, - /* 375 Khz SSI clock */ - /* 44913 1826 */ {0x0012, 0x8801}, - /* SSI reg addr */ - /* 44938 1827 */ {0x0080, 0x8800}, - /* SSI data to write */ - /* 44961 1828 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 44985 1829 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 45009 1830 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 45035 1831 */ {0x0008, 0x8802}, - /* 375 Khz SSI clock */ - /* 45060 1832 */ {0x0012, 0x8801}, - /* SSI reg addr */ - /* 45085 1833 */ {0x0000, 0x8800}, - /* SSI data to write */ - /* 45108 1834 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 45132 1835 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 45156 1836 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 45182 1837 */ {0x0008, 0x8802}, - /* 375 Khz SSI clock */ - /* 45207 1838 */ {0x0011, 0x8801}, - /* SSI reg addr */ - /* 45232 1839 */ {0x0040, 0x8800}, - /* SSI data to write */ - /* 45255 1840 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 45279 1841 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 45303 1842 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 45329 1843 */ {0x0008, 0x8802}, - /* 45354 1844 */ {0x0013, 0x8801}, - /* 45379 1845 */ {0x0000, 0x8800}, - /* 45402 1846 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 45426 1847 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 45450 1848 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 45476 1849 */ {0x0008, 0x8802}, - /* 45501 1850 */ {0x0014, 0x8801}, - /* 45526 1851 */ {0x0000, 0x8800}, - /* 45549 1852 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 45573 1853 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 45597 1854 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 45623 1855 */ {0x0008, 0x8802}, - /* 45648 1856 */ {0x0015, 0x8801}, - /* 45673 1857 */ {0x0001, 0x8800}, - /* 45696 1858 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 45720 1859 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 45744 1860 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 45770 1861 */ {0x0008, 0x8802}, - /* 45795 1862 */ {0x0016, 0x8801}, - /* 45820 1863 */ {0x0003, 0x8800}, - /* 45843 1864 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 45867 1865 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 45891 1866 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 45917 1867 */ {0x0008, 0x8802}, - /* 45942 1868 */ {0x0017, 0x8801}, - /* 45967 1869 */ {0x0036, 0x8800}, - /* 45990 1870 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 46014 1871 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 46038 1872 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 46064 1873 */ {0x0008, 0x8802}, - /* 46089 1874 */ {0x0018, 0x8801}, - /* 46114 1875 */ {0x00ec, 0x8800}, - /* 46137 1876 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 46161 1877 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 46185 1878 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 46211 1879 */ {0x0008, 0x8802}, - /* 46236 1880 */ {0x001a, 0x8801}, - /* 46261 1881 */ {0x0094, 0x8800}, - /* 46284 1882 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 46308 1883 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 46332 1884 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 46358 1885 */ {0x0008, 0x8802}, - /* 46383 1886 */ {0x001b, 0x8801}, - /* 46408 1887 */ {0x0000, 0x8800}, - /* 46431 1888 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 46455 1889 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 46479 1890 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 46505 1891 */ {0x0008, 0x8802}, - /* 46530 1892 */ {0x0027, 0x8801}, - /* 46555 1893 */ {0x00a2, 0x8800}, - /* 46578 1894 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 46602 1895 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 46626 1896 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 46652 1897 */ {0x0008, 0x8802}, - /* 46677 1898 */ {0x0028, 0x8801}, - /* 46702 1899 */ {0x0040, 0x8800}, - /* 46725 1900 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 46749 1901 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 46773 1902 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 46799 1903 */ {0x0008, 0x8802}, - /* 46824 1904 */ {0x002a, 0x8801}, - /* 46849 1905 */ {0x0084, 0x8800}, - /* 46872 1906 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 46896 1907 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 46920 1908 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 46946 1909 */ {0x0008, 0x8802}, - /* 46971 1910 */ {0x002b, 0x8801}, - /* 46996 1911 */ {0x00a8, 0x8800}, - /* 47019 1912 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 47043 1913 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 47067 1914 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 47093 1915 */ {0x0008, 0x8802}, - /* 47118 1916 */ {0x002c, 0x8801}, - /* 47143 1917 */ {0x00fe, 0x8800}, - /* 47166 1918 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 47190 1919 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 47214 1920 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 47240 1921 */ {0x0008, 0x8802}, - /* 47265 1922 */ {0x002d, 0x8801}, - /* 47290 1923 */ {0x0003, 0x8800}, - /* 47313 1924 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 47337 1925 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 47361 1926 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 47387 1927 */ {0x0008, 0x8802}, - /* 47412 1928 */ {0x0038, 0x8801}, - /* 47437 1929 */ {0x0083, 0x8800}, - /* 47460 1930 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 47484 1931 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 47508 1932 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 47534 1933 */ {0x0008, 0x8802}, - /* 47559 1934 */ {0x0033, 0x8801}, - /* 47584 1935 */ {0x0081, 0x8800}, - /* 47607 1936 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 47631 1937 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 47655 1938 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 47681 1939 */ {0x0008, 0x8802}, - /* 47706 1940 */ {0x0034, 0x8801}, - /* 47731 1941 */ {0x004a, 0x8800}, - /* 47754 1942 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 47778 1943 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 47802 1944 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 47828 1945 */ {0x0008, 0x8802}, - /* 47853 1946 */ {0x0039, 0x8801}, - /* 47878 1947 */ {0x0000, 0x8800}, - /* 47901 1948 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 47925 1949 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 47949 1950 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 47975 1951 */ {0x0008, 0x8802}, - /* 48000 1952 */ {0x0010, 0x8801}, - /* 48025 1953 */ {0x00a8, 0x8800}, - /* 48048 1954 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 48072 1955 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 48096 1956 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 48122 1957 */ {0x0008, 0x8802}, - /* 48147 1958 */ {0x0006, 0x8801}, - /* 48172 1959 */ {0x0058, 0x8800}, - /* 48195 1960 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 48219 1961 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 48243 1962 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 48269 1963 */ {0x0008, 0x8802}, - /* 48294 1964 */ {0x0000, 0x8801}, - /* 48319 1965 */ {0x0004, 0x8800}, - /* 48342 1966 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 48366 1967 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 48390 1968 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 48416 1969 */ {0x0008, 0x8802}, - /* 48441 1970 */ {0x0040, 0x8801}, - /* 48466 1971 */ {0x0080, 0x8800}, - /* 48489 1972 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 48513 1973 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 48537 1974 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 48563 1975 */ {0x0008, 0x8802}, - /* 48588 1976 */ {0x0041, 0x8801}, - /* 48613 1977 */ {0x000c, 0x8800}, - /* 48636 1978 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 48660 1979 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 48684 1980 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 48710 1981 */ {0x0008, 0x8802}, - /* 48735 1982 */ {0x0042, 0x8801}, - /* 48760 1983 */ {0x000c, 0x8800}, - /* 48783 1984 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 48807 1985 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 48831 1986 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 48857 1987 */ {0x0008, 0x8802}, - /* 48882 1988 */ {0x0043, 0x8801}, - /* 48907 1989 */ {0x0028, 0x8800}, - /* 48930 1990 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 48954 1991 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 48978 1992 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 49004 1993 */ {0x0008, 0x8802}, - /* 49029 1994 */ {0x0044, 0x8801}, - /* 49054 1995 */ {0x0080, 0x8800}, - /* 49077 1996 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 49101 1997 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 49125 1998 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 49151 1999 */ {0x0008, 0x8802}, - /* 49176 2000 */ {0x0045, 0x8801}, - /* 49201 2001 */ {0x0020, 0x8800}, - /* 49224 2002 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 49248 2003 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 49272 2004 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 49298 2005 */ {0x0008, 0x8802}, - /* 49323 2006 */ {0x0046, 0x8801}, - /* 49348 2007 */ {0x0020, 0x8800}, - /* 49371 2008 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 49395 2009 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 49419 2010 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 49445 2011 */ {0x0008, 0x8802}, - /* 49470 2012 */ {0x0047, 0x8801}, - /* 49495 2013 */ {0x0080, 0x8800}, - /* 49518 2014 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 49542 2015 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 49566 2016 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 49592 2017 */ {0x0008, 0x8802}, - /* 49617 2018 */ {0x0048, 0x8801}, - /* 49642 2019 */ {0x004c, 0x8800}, - /* 49665 2020 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 49689 2021 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 49713 2022 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 49739 2023 */ {0x0008, 0x8802}, - /* 49764 2024 */ {0x0049, 0x8801}, - /* 49789 2025 */ {0x0084, 0x8800}, - /* 49812 2026 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 49836 2027 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 49860 2028 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 49886 2029 */ {0x0008, 0x8802}, - /* 49911 2030 */ {0x004a, 0x8801}, - /* 49936 2031 */ {0x0084, 0x8800}, - /* 49959 2032 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 49983 2033 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 50007 2034 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 50033 2035 */ {0x0008, 0x8802}, - /* 50058 2036 */ {0x004b, 0x8801}, - /* 50083 2037 */ {0x0084, 0x8800}, - /* 50106 2038 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ + {0x00c0, 0x8804}, /* SSI slave addr */ + {0x0008, 0x8802}, /* 375 Khz SSI clock */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, /* 375 Khz SSI clock */ + {0x0012, 0x8801}, /* SSI reg addr */ + {0x0080, 0x8800}, /* SSI data to write */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, /* 375 Khz SSI clock */ + {0x0012, 0x8801}, /* SSI reg addr */ + {0x0000, 0x8800}, /* SSI data to write */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, /* 375 Khz SSI clock */ + {0x0011, 0x8801}, /* SSI reg addr */ + {0x0040, 0x8800}, /* SSI data to write */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0013, 0x8801}, + {0x0000, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0014, 0x8801}, + {0x0000, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0015, 0x8801}, + {0x0001, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0016, 0x8801}, + {0x0003, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0017, 0x8801}, + {0x0036, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0018, 0x8801}, + {0x00ec, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x001a, 0x8801}, + {0x0094, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x001b, 0x8801}, + {0x0000, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0027, 0x8801}, + {0x00a2, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0028, 0x8801}, + {0x0040, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x002a, 0x8801}, + {0x0084, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x002b, 0x8801}, + {0x00a8, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x002c, 0x8801}, + {0x00fe, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x002d, 0x8801}, + {0x0003, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0038, 0x8801}, + {0x0083, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0033, 0x8801}, + {0x0081, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0034, 0x8801}, + {0x004a, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0039, 0x8801}, + {0x0000, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0010, 0x8801}, + {0x00a8, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0006, 0x8801}, + {0x0058, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0000, 0x8801}, + {0x0004, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0040, 0x8801}, + {0x0080, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0041, 0x8801}, + {0x000c, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0042, 0x8801}, + {0x000c, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0043, 0x8801}, + {0x0028, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0044, 0x8801}, + {0x0080, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0045, 0x8801}, + {0x0020, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0046, 0x8801}, + {0x0020, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0047, 0x8801}, + {0x0080, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0048, 0x8801}, + {0x004c, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x0049, 0x8801}, + {0x0084, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x004a, 0x8801}, + {0x0084, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x0008, 0x8802}, + {0x004b, 0x8801}, + {0x0084, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ /* --------------------------------------- */ - /* 50132 2039 */ {0x0012, 0x8700}, - /* Clock speed 48Mhz/(2+2)/2= 6 Mhz */ - /* 50157 2040 */ {0x0000, 0x8701}, - /* CKx1 clock delay adj */ - /* 50182 2041 */ {0x0000, 0x8701}, - /* CKx1 clock delay adj */ - /* 50207 2042 */ {0x0001, 0x870c}, - /* CKOx2 output */ + {0x0012, 0x8700}, /* Clock speed 48Mhz/(2+2)/2= 6 Mhz */ + {0x0000, 0x8701}, /* CKx1 clock delay adj */ + {0x0000, 0x8701}, /* CKx1 clock delay adj */ + {0x0001, 0x870c}, /* CKOx2 output */ /* --------------------------------------- */ - /* 50232 2043 */ {0x0080, 0x8600}, - /* Line memory read counter (L) */ - /* 50257 2044 */ {0x0001, 0x8606}, - /* reserved */ - /* 50282 2045 */ {0x0064, 0x8607}, - /* Line memory read counter (H) 0x6480=25,728 */ - /* 50307 2046 */ {0x002a, 0x8601}, - /* CDSP sharp interpolation mode, + {0x0080, 0x8600}, /* Line memory read counter (L) */ + {0x0001, 0x8606}, /* reserved */ + {0x0064, 0x8607}, /* Line memory read counter (H) 0x6480=25,728 */ + {0x002a, 0x8601}, /* CDSP sharp interpolation mode, * line sel for color sep, edge enhance enab */ - /* 50332 2047 */ {0x0000, 0x8602}, - /* optical black level for user settng = 0 */ - /* 50357 2048 */ {0x0080, 0x8600}, - /* Line memory read counter (L) */ - /* 50382 2049 */ {0x000a, 0x8603}, - /* optical black level calc mode: auto; optical black offset = 10 */ - /* 50407 2050 */ {0x00df, 0x865b}, - /* Horiz offset for valid pixels (L)=0xdf */ - /* 50432 2051 */ {0x0012, 0x865c}, - /* Vert offset for valid lines (L)=0x12 */ + {0x0000, 0x8602}, /* optical black level for user settng = 0 */ + {0x0080, 0x8600}, /* Line memory read counter (L) */ + {0x000a, 0x8603}, /* optical black level calc mode: + * auto; optical black offset = 10 */ + {0x00df, 0x865b}, /* Horiz offset for valid pixels (L)=0xdf */ + {0x0012, 0x865c}, /* Vert offset for valid lines (L)=0x12 */ /* The following two lines seem to be the "wrong" resolution. */ /* But perhaps these indicate the actual size of the sensor */ /* rather than the size of the current video mode. */ - /* 50457 2052 */ {0x0058, 0x865d}, - /* Horiz valid pixels (*4) (L) = 352 */ - /* 50482 2053 */ {0x0048, 0x865e}, - /* Vert valid lines (*4) (L) = 288 */ - - /* 50507 2054 */ {0x0015, 0x8608}, - /* A11 Coef ... */ - /* 50532 2055 */ {0x0030, 0x8609}, - /* 50557 2056 */ {0x00fb, 0x860a}, - /* 50582 2057 */ {0x003e, 0x860b}, - /* 50607 2058 */ {0x00ce, 0x860c}, - /* 50632 2059 */ {0x00f4, 0x860d}, - /* 50657 2060 */ {0x00eb, 0x860e}, - /* 50682 2061 */ {0x00dc, 0x860f}, - /* 50707 2062 */ {0x0039, 0x8610}, - /* 50732 2063 */ {0x0001, 0x8611}, - /* R offset for white balance ... */ - /* 50757 2064 */ {0x0000, 0x8612}, - /* 50782 2065 */ {0x0001, 0x8613}, - /* 50807 2066 */ {0x0000, 0x8614}, - /* 50832 2067 */ {0x005b, 0x8651}, - /* R gain for white balance ... */ - /* 50857 2068 */ {0x0040, 0x8652}, - /* 50882 2069 */ {0x0060, 0x8653}, - /* 50907 2070 */ {0x0040, 0x8654}, - /* 50932 2071 */ {0x0000, 0x8655}, - /* 50957 2072 */ {0x0001, 0x863f}, - /* Fixed gamma correction enable, USB control, - * lum filter disable, lum noise clip disable */ - /* 50982 2073 */ {0x00a1, 0x8656}, - /* Window1 size 256x256, Windows2 size 64x64, - * gamma look-up disable, new edge enhancement enable */ - /* 51007 2074 */ {0x0018, 0x8657}, - /* Edge gain high thresh */ - /* 51032 2075 */ {0x0020, 0x8658}, - /* Edge gain low thresh */ - /* 51057 2076 */ {0x000a, 0x8659}, - /* Edge bandwidth high threshold */ - /* 51082 2077 */ {0x0005, 0x865a}, - /* Edge bandwidth low threshold */ + {0x0058, 0x865d}, /* Horiz valid pixels (*4) (L) = 352 */ + {0x0048, 0x865e}, /* Vert valid lines (*4) (L) = 288 */ + + {0x0015, 0x8608}, /* A11 Coef ... */ + {0x0030, 0x8609}, + {0x00fb, 0x860a}, + {0x003e, 0x860b}, + {0x00ce, 0x860c}, + {0x00f4, 0x860d}, + {0x00eb, 0x860e}, + {0x00dc, 0x860f}, + {0x0039, 0x8610}, + {0x0001, 0x8611}, /* R offset for white balance ... */ + {0x0000, 0x8612}, + {0x0001, 0x8613}, + {0x0000, 0x8614}, + {0x005b, 0x8651}, /* R gain for white balance ... */ + {0x0040, 0x8652}, + {0x0060, 0x8653}, + {0x0040, 0x8654}, + {0x0000, 0x8655}, + {0x0001, 0x863f}, /* Fixed gamma correction enable, USB control, + * lum filter disable, lum noise clip disable */ + {0x00a1, 0x8656}, /* Window1 size 256x256, Windows2 size 64x64, + * gamma look-up disable, + * new edge enhancement enable */ + {0x0018, 0x8657}, /* Edge gain high thresh */ + {0x0020, 0x8658}, /* Edge gain low thresh */ + {0x000a, 0x8659}, /* Edge bandwidth high threshold */ + {0x0005, 0x865a}, /* Edge bandwidth low threshold */ /* -------------------------------- */ - /* 51107 2078 */ {0x0030, 0x8112}, - /* Video drop enable, ISO streaming enable */ - /* 51130 2079 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 51154 2080 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 51180 2081 */ {0xa908, 0x8802}, - /* 51205 2082 */ {0x0034, 0x8801}, - /* SSI reg addr */ - /* 51230 2083 */ {0x00ca, 0x8800}, + {0x0030, 0x8112}, /* Video drop enable, ISO streaming enable */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0xa908, 0x8802}, + {0x0034, 0x8801}, /* SSI reg addr */ + {0x00ca, 0x8800}, /* SSI data to write */ - /* 51253 2084 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 51277 2085 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 51301 2086 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 51327 2087 */ {0x1f08, 0x8802}, - /* 51352 2088 */ {0x0006, 0x8801}, - /* 51377 2089 */ {0x0080, 0x8800}, - /* 51400 2090 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0x1f08, 0x8802}, + {0x0006, 0x8801}, + {0x0080, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ /* ----- Read back coefs we wrote earlier. */ - /* 51424 2091 */ /* READ { 0, 0x0000, 0x8608 } -> 0000: 15 */ - /* 51448 2092 */ /* READ { 0, 0x0000, 0x8609 } -> 0000: 30 */ - /* 51472 2093 */ /* READ { 0, 0x0000, 0x860a } -> 0000: fb */ - /* 51496 2094 */ /* READ { 0, 0x0000, 0x860b } -> 0000: 3e */ - /* 51520 2095 */ /* READ { 0, 0x0000, 0x860c } -> 0000: ce */ - /* 51544 2096 */ /* READ { 0, 0x0000, 0x860d } -> 0000: f4 */ - /* 51568 2097 */ /* READ { 0, 0x0000, 0x860e } -> 0000: eb */ - /* 51592 2098 */ /* READ { 0, 0x0000, 0x860f } -> 0000: dc */ - /* 51616 2099 */ /* READ { 0, 0x0000, 0x8610 } -> 0000: 39 */ - /* 51640 2100 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 51664 2101 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 08 */ - /* 51690 2102 */ {0xb008, 0x8802}, - /* 51715 2103 */ {0x0006, 0x8801}, - /* 51740 2104 */ {0x007d, 0x8800}, - /* 51763 2105 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0000, 0x8608 } -> 0000: 15 */ + /* READ { 0x0000, 0x8609 } -> 0000: 30 */ + /* READ { 0x0000, 0x860a } -> 0000: fb */ + /* READ { 0x0000, 0x860b } -> 0000: 3e */ + /* READ { 0x0000, 0x860c } -> 0000: ce */ + /* READ { 0x0000, 0x860d } -> 0000: f4 */ + /* READ { 0x0000, 0x860e } -> 0000: eb */ + /* READ { 0x0000, 0x860f } -> 0000: dc */ + /* READ { 0x0000, 0x8610 } -> 0000: 39 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 08 */ + {0xb008, 0x8802}, + {0x0006, 0x8801}, + {0x007d, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ #if 0 /* experimental. dark version. */ @@ -504,114 +465,86 @@ static const u16 spca508_init_data[][2] = /* earlier commands (A11 Coef...), but if I disable it, */ /* the image appears too dark. Maybe there was some kind of */ /* reset since the earlier commands, so this is necessary again. */ - /* 51789 2106 */ {0x0015, 0x8608}, - /* 51814 2107 */ {0x0030, 0x8609}, - /* 51839 2108 */ {0xfffb, 0x860a}, - /* 51864 2109 */ {0x003e, 0x860b}, - /* 51889 2110 */ {0xffce, 0x860c}, - /* 51914 2111 */ {0xfff4, 0x860d}, - /* 51939 2112 */ {0xffeb, 0x860e}, - /* 51964 2113 */ {0xffdc, 0x860f}, - /* 51989 2114 */ {0x0039, 0x8610}, - /* 52014 2115 */ {0x0018, 0x8657}, + {0x0015, 0x8608}, + {0x0030, 0x8609}, + {0xfffb, 0x860a}, + {0x003e, 0x860b}, + {0xffce, 0x860c}, + {0xfff4, 0x860d}, + {0xffeb, 0x860e}, + {0xffdc, 0x860f}, + {0x0039, 0x8610}, + {0x0018, 0x8657}, #endif - /* 52039 2116 */ {0x0000, 0x8508}, - /* Disable compression. */ + {0x0000, 0x8508}, /* Disable compression. */ /* Previous line was: - * 52039 2116 * { 0, 0x0021, 0x8508 }, * Enable compression. */ - /* 52064 2117 */ {0x0032, 0x850b}, - /* compression stuff */ - /* 52089 2118 */ {0x0003, 0x8509}, - /* compression stuff */ - /* 52114 2119 */ {0x0011, 0x850a}, - /* compression stuff */ - /* 52139 2120 */ {0x0021, 0x850d}, - /* compression stuff */ - /* 52164 2121 */ {0x0010, 0x850c}, - /* compression stuff */ - /* 52189 2122 */ {0x0003, 0x8500}, - /* *** Video mode: 160x120 */ - /* 52214 2123 */ {0x0001, 0x8501}, - /* Hardware-dominated snap control */ - /* 52239 2124 */ {0x0061, 0x8656}, - /* Window1 size 128x128, Windows2 size 128x128, - * gamma look-up disable, new edge enhancement enable */ - /* 52264 2125 */ {0x0018, 0x8617}, - /* Window1 start X (*2) */ - /* 52289 2126 */ {0x0008, 0x8618}, - /* Window1 start Y (*2) */ - /* 52314 2127 */ {0x0061, 0x8656}, - /* Window1 size 128x128, Windows2 size 128x128, - * gamma look-up disable, new edge enhancement enable */ - /* 52339 2128 */ {0x0058, 0x8619}, - /* Window2 start X (*2) */ - /* 52364 2129 */ {0x0008, 0x861a}, - /* Window2 start Y (*2) */ - /* 52389 2130 */ {0x00ff, 0x8615}, - /* High lum thresh for white balance */ - /* 52414 2131 */ {0x0000, 0x8616}, - /* Low lum thresh for white balance */ - /* 52439 2132 */ {0x0012, 0x8700}, - /* Clock speed 48Mhz/(2+2)/2= 6 Mhz */ - /* 52464 2133 */ {0x0012, 0x8700}, - /* Clock speed 48Mhz/(2+2)/2= 6 Mhz */ - /* 52487 2134 */ /* READ { 0, 0x0000, 0x8656 } -> 0000: 61 */ - /* 52513 2135 */ {0x0028, 0x8802}, - /* 375 Khz SSI clock, SSI r/w sync with VSYNC */ - /* 52536 2136 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 52560 2137 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 28 */ - /* 52586 2138 */ {0x1f28, 0x8802}, - /* 375 Khz SSI clock, SSI r/w sync with VSYNC */ - /* 52611 2139 */ {0x0010, 0x8801}, - /* SSI reg addr */ - /* 52636 2140 */ {0x003e, 0x8800}, - /* SSI data to write */ - /* 52659 2141 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 52685 2142 */ {0x0028, 0x8802}, - /* 52708 2143 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 52732 2144 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 28 */ - /* 52758 2145 */ {0x1f28, 0x8802}, - /* 52783 2146 */ {0x0000, 0x8801}, - /* 52808 2147 */ {0x001f, 0x8800}, - /* 52831 2148 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 52857 2149 */ {0x0001, 0x8602}, - /* optical black level for user settning = 1 */ + {0x0021, 0x8508}, * Enable compression. */ + {0x0032, 0x850b}, /* compression stuff */ + {0x0003, 0x8509}, /* compression stuff */ + {0x0011, 0x850a}, /* compression stuff */ + {0x0021, 0x850d}, /* compression stuff */ + {0x0010, 0x850c}, /* compression stuff */ + {0x0003, 0x8500}, /* *** Video mode: 160x120 */ + {0x0001, 0x8501}, /* Hardware-dominated snap control */ + {0x0061, 0x8656}, /* Window1 size 128x128, Windows2 size 128x128, + * gamma look-up disable, + * new edge enhancement enable */ + {0x0018, 0x8617}, /* Window1 start X (*2) */ + {0x0008, 0x8618}, /* Window1 start Y (*2) */ + {0x0061, 0x8656}, /* Window1 size 128x128, Windows2 size 128x128, + * gamma look-up disable, + * new edge enhancement enable */ + {0x0058, 0x8619}, /* Window2 start X (*2) */ + {0x0008, 0x861a}, /* Window2 start Y (*2) */ + {0x00ff, 0x8615}, /* High lum thresh for white balance */ + {0x0000, 0x8616}, /* Low lum thresh for white balance */ + {0x0012, 0x8700}, /* Clock speed 48Mhz/(2+2)/2= 6 Mhz */ + {0x0012, 0x8700}, /* Clock speed 48Mhz/(2+2)/2= 6 Mhz */ + /* READ { 0x0000, 0x8656 } -> 0000: 61 */ + {0x0028, 0x8802}, /* 375 Khz SSI clock, SSI r/w sync with VSYNC */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 28 */ + {0x1f28, 0x8802}, /* 375 Khz SSI clock, SSI r/w sync with VSYNC */ + {0x0010, 0x8801}, /* SSI reg addr */ + {0x003e, 0x8800}, /* SSI data to write */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + {0x0028, 0x8802}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 28 */ + {0x1f28, 0x8802}, + {0x0000, 0x8801}, + {0x001f, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + {0x0001, 0x8602}, /* optical black level for user settning = 1 */ #if 0 /* NOTE: Code like this case lets this driver (often) work */ /* in 352x288 resolution, apparently by slowing down the */ /* clock. */ - /* 52464 2133 */ {0x002F, 0x8700}, - /* Clock speed */ + {0x002f, 0x8700}, /* Clock speed */ #else /* Original: */ - /* 52882 2150 */ {0x0023, 0x8700}, - /* Clock speed 48Mhz/(3+2)/4= 2.4 Mhz */ + {0x0023, 0x8700}, /* Clock speed 48Mhz/(3+2)/4= 2.4 Mhz */ #endif - /* 52907 2151 */ {0x000f, 0x8602}, - /* optical black level for user settning = 15 */ - - /* 52932 2152 */ {0x0028, 0x8802}, - /* 52955 2153 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 52979 2154 */ /* READ { 0, 0x0001, 0x8802 } -> 0000: 28 */ - /* 53005 2155 */ {0x1f28, 0x8802}, - /* 53030 2156 */ {0x0010, 0x8801}, - /* 53055 2157 */ {0x007b, 0x8800}, - /* 53078 2158 */ /* READ { 0, 0x0001, 0x8803 } -> 0000: 00 */ - /* 53104 2159 */ {0x002f, 0x8651}, - /* R gain for white balance ... */ - /* 53129 2160 */ {0x0080, 0x8653}, - /* 53152 2161 */ /* READ { 0, 0x0000, 0x8655 } -> 0000: 00 */ - /* 53178 2162 */ {0x0000, 0x8655}, - - /* 53203 2163 */ {0x0030, 0x8112}, - /* Video drop enable, ISO streaming enable */ - /* 53228 2164 */ {0x0020, 0x8112}, - /* Video drop enable, ISO streaming disable */ - /* 53252 2165 */ - /* UNKNOWN DIRECTION (URB_FUNCTION_SELECT_INTERFACE: (ALT=0) ) */ + {0x000f, 0x8602}, /* optical black level for user settning = 15 */ + + {0x0028, 0x8802}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 28 */ + {0x1f28, 0x8802}, + {0x0010, 0x8801}, + {0x007b, 0x8800}, + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + {0x002f, 0x8651}, /* R gain for white balance ... */ + {0x0080, 0x8653}, + /* READ { 0x0000, 0x8655 } -> 0000: 00 */ + {0x0000, 0x8655}, + + {0x0030, 0x8112}, /* Video drop enable, ISO streaming enable */ + {0x0020, 0x8112}, /* Video drop enable, ISO streaming disable */ + /* UNKNOWN DIRECTION (URB_FUNCTION_SELECT_INTERFACE: (ALT=0) ) */ {} }; @@ -619,27 +552,27 @@ static const u16 spca508_init_data[][2] = * Initialization data for Intel EasyPC Camera CS110 */ static const u16 spca508cs110_init_data[][2] = { - {0x0000, 0x870b}, /* Reset CTL3 */ - {0x0003, 0x8111}, /* Soft Reset compression, memory, TG & CDSP */ - {0x0000, 0x8111}, /* Normal operation on reset */ + {0x0000, 0x870b}, /* Reset CTL3 */ + {0x0003, 0x8111}, /* Soft Reset compression, memory, TG & CDSP */ + {0x0000, 0x8111}, /* Normal operation on reset */ {0x0090, 0x8110}, /* External Clock 2x & Synchronous Serial Interface Output */ - {0x0020, 0x8112}, /* Video Drop packet enable */ - {0x0000, 0x8114}, /* Software GPIO output data */ + {0x0020, 0x8112}, /* Video Drop packet enable */ + {0x0000, 0x8114}, /* Software GPIO output data */ {0x0001, 0x8114}, {0x0001, 0x8114}, {0x0001, 0x8114}, {0x0003, 0x8114}, /* Initial sequence Synchronous Serial Interface */ - {0x000f, 0x8402}, /* Memory bank Address */ - {0x0000, 0x8403}, /* Memory bank Address */ - {0x00ba, 0x8804}, /* SSI Slave address */ - {0x0010, 0x8802}, /* 93.75kHz SSI Clock Two DataByte */ - {0x0010, 0x8802}, /* 93.75kHz SSI Clock two DataByte */ + {0x000f, 0x8402}, /* Memory bank Address */ + {0x0000, 0x8403}, /* Memory bank Address */ + {0x00ba, 0x8804}, /* SSI Slave address */ + {0x0010, 0x8802}, /* 93.75kHz SSI Clock Two DataByte */ + {0x0010, 0x8802}, /* 93.75kHz SSI Clock two DataByte */ {0x0001, 0x8801}, - {0x000a, 0x8805},/* a - NWG: Dunno what this is about */ + {0x000a, 0x8805}, /* a - NWG: Dunno what this is about */ {0x0000, 0x8800}, {0x0010, 0x8802}, @@ -673,459 +606,459 @@ static const u16 spca508cs110_init_data[][2] = { {0x0000, 0x8800}, {0x0010, 0x8802}, - {0x0002, 0x8704}, /* External input CKIx1 */ - {0x0001, 0x8606}, /* 1 Line memory Read Counter (H) Result: (d)410 */ - {0x009a, 0x8600}, /* Line memory Read Counter (L) */ - {0x0001, 0x865b}, /* 1 Horizontal Offset for Valid Pixel(L) */ - {0x0003, 0x865c}, /* 3 Vertical Offset for Valid Lines(L) */ - {0x0058, 0x865d}, /* 58 Horizontal Valid Pixel Window(L) */ + {0x0002, 0x8704}, /* External input CKIx1 */ + {0x0001, 0x8606}, /* 1 Line memory Read Counter (H) Result: (d)410 */ + {0x009a, 0x8600}, /* Line memory Read Counter (L) */ + {0x0001, 0x865b}, /* 1 Horizontal Offset for Valid Pixel(L) */ + {0x0003, 0x865c}, /* 3 Vertical Offset for Valid Lines(L) */ + {0x0058, 0x865d}, /* 58 Horizontal Valid Pixel Window(L) */ - {0x0006, 0x8660}, /* Nibble data + input order */ + {0x0006, 0x8660}, /* Nibble data + input order */ - {0x000a, 0x8602}, /* Optical black level set to 0x0a */ -/* 1945 */ {0x0000, 0x8603}, /* Optical black level Offset */ + {0x000a, 0x8602}, /* Optical black level set to 0x0a */ + {0x0000, 0x8603}, /* Optical black level Offset */ -/* 1962 * {0, 0x0000, 0x8611}, * 0 R Offset for white Balance */ -/* 1963 * {0, 0x0000, 0x8612}, * 1 Gr Offset for white Balance */ -/* 1964 * {0, 0x0000, 0x8613}, * 1f B Offset for white Balance */ -/* 1965 * {0, 0x0000, 0x8614}, * f0 Gb Offset for white Balance */ +/* {0x0000, 0x8611}, * 0 R Offset for white Balance */ +/* {0x0000, 0x8612}, * 1 Gr Offset for white Balance */ +/* {0x0000, 0x8613}, * 1f B Offset for white Balance */ +/* {0x0000, 0x8614}, * f0 Gb Offset for white Balance */ - {0x0040, 0x8651}, /* 2b BLUE gain for white balance good at all 60 */ - {0x0030, 0x8652}, /* 41 Gr Gain for white Balance (L) */ - {0x0035, 0x8653}, /* 26 RED gain for white balance */ - {0x0035, 0x8654}, /* 40Gb Gain for white Balance (L) */ + {0x0040, 0x8651}, /* 2b BLUE gain for white balance good at all 60 */ + {0x0030, 0x8652}, /* 41 Gr Gain for white Balance (L) */ + {0x0035, 0x8653}, /* 26 RED gain for white balance */ + {0x0035, 0x8654}, /* 40Gb Gain for white Balance (L) */ {0x0041, 0x863f}, /* Fixed Gamma correction enabled (makes colours look better) */ -/* 2422 */ {0x0000, 0x8655}, - /* High bits for white balance*****brightness control*** */ + {0x0000, 0x8655}, + /* High bits for white balance*****brightness control*** */ {} }; static const u16 spca508_sightcam_init_data[][2] = { /* This line seems to setup the frame/canvas */ - /*368 */ {0x000f, 0x8402}, + {0x000f, 0x8402}, /* Theese 6 lines are needed to startup the webcam */ - /*398 */ {0x0090, 0x8110}, - /*399 */ {0x0001, 0x8114}, - /*400 */ {0x0001, 0x8114}, - /*401 */ {0x0001, 0x8114}, - /*402 */ {0x0003, 0x8114}, - /*403 */ {0x0080, 0x8804}, + {0x0090, 0x8110}, + {0x0001, 0x8114}, + {0x0001, 0x8114}, + {0x0001, 0x8114}, + {0x0003, 0x8114}, + {0x0080, 0x8804}, /* This part seems to make the pictures darker? (autobrightness?) */ - /*436 */ {0x0001, 0x8801}, - /*437 */ {0x0004, 0x8800}, - /*439 */ {0x0003, 0x8801}, - /*440 */ {0x00e0, 0x8800}, - /*442 */ {0x0004, 0x8801}, - /*443 */ {0x00b4, 0x8800}, - /*445 */ {0x0005, 0x8801}, - /*446 */ {0x0000, 0x8800}, - - /*448 */ {0x0006, 0x8801}, - /*449 */ {0x00e0, 0x8800}, - /*451 */ {0x0007, 0x8801}, - /*452 */ {0x000c, 0x8800}, + {0x0001, 0x8801}, + {0x0004, 0x8800}, + {0x0003, 0x8801}, + {0x00e0, 0x8800}, + {0x0004, 0x8801}, + {0x00b4, 0x8800}, + {0x0005, 0x8801}, + {0x0000, 0x8800}, + + {0x0006, 0x8801}, + {0x00e0, 0x8800}, + {0x0007, 0x8801}, + {0x000c, 0x8800}, /* This section is just needed, it probably * does something like the previous section, * but the cam won't start if it's not included. */ - /*484 */ {0x0014, 0x8801}, - /*485 */ {0x0008, 0x8800}, - /*487 */ {0x0015, 0x8801}, - /*488 */ {0x0067, 0x8800}, - /*490 */ {0x0016, 0x8801}, - /*491 */ {0x0000, 0x8800}, - /*493 */ {0x0017, 0x8801}, - /*494 */ {0x0020, 0x8800}, - /*496 */ {0x0018, 0x8801}, - /*497 */ {0x0044, 0x8800}, + {0x0014, 0x8801}, + {0x0008, 0x8800}, + {0x0015, 0x8801}, + {0x0067, 0x8800}, + {0x0016, 0x8801}, + {0x0000, 0x8800}, + {0x0017, 0x8801}, + {0x0020, 0x8800}, + {0x0018, 0x8801}, + {0x0044, 0x8800}, /* Makes the picture darker - and the * cam won't start if not included */ - /*505 */ {0x001e, 0x8801}, - /*506 */ {0x00ea, 0x8800}, - /*508 */ {0x001f, 0x8801}, - /*509 */ {0x0001, 0x8800}, - /*511 */ {0x0003, 0x8801}, - /*512 */ {0x00e0, 0x8800}, + {0x001e, 0x8801}, + {0x00ea, 0x8800}, + {0x001f, 0x8801}, + {0x0001, 0x8800}, + {0x0003, 0x8801}, + {0x00e0, 0x8800}, /* seems to place the colors ontop of each other #1 */ - /*517 */ {0x0006, 0x8704}, - /*518 */ {0x0001, 0x870c}, - /*519 */ {0x0016, 0x8600}, - /*520 */ {0x0002, 0x8606}, + {0x0006, 0x8704}, + {0x0001, 0x870c}, + {0x0016, 0x8600}, + {0x0002, 0x8606}, /* if not included the pictures becomes _very_ dark */ - /*521 */ {0x0064, 0x8607}, - /*522 */ {0x003a, 0x8601}, - /*523 */ {0x0000, 0x8602}, + {0x0064, 0x8607}, + {0x003a, 0x8601}, + {0x0000, 0x8602}, /* seems to place the colors ontop of each other #2 */ - /*524 */ {0x0016, 0x8600}, - /*525 */ {0x0018, 0x8617}, - /*526 */ {0x0008, 0x8618}, - /*527 */ {0x00a1, 0x8656}, + {0x0016, 0x8600}, + {0x0018, 0x8617}, + {0x0008, 0x8618}, + {0x00a1, 0x8656}, /* webcam won't start if not included */ - /*528 */ {0x0007, 0x865b}, - /*529 */ {0x0001, 0x865c}, - /*530 */ {0x0058, 0x865d}, - /*531 */ {0x0048, 0x865e}, + {0x0007, 0x865b}, + {0x0001, 0x865c}, + {0x0058, 0x865d}, + {0x0048, 0x865e}, /* adjusts the colors */ - /*541 */ {0x0049, 0x8651}, - /*542 */ {0x0040, 0x8652}, - /*543 */ {0x004c, 0x8653}, - /*544 */ {0x0040, 0x8654}, + {0x0049, 0x8651}, + {0x0040, 0x8652}, + {0x004c, 0x8653}, + {0x0040, 0x8654}, {} }; static const u16 spca508_sightcam2_init_data[][2] = { -/* 35 */ {0x0020, 0x8112}, - -/* 36 */ {0x000f, 0x8402}, -/* 37 */ {0x0000, 0x8403}, - -/* 38 */ {0x0008, 0x8201}, -/* 39 */ {0x0008, 0x8200}, -/* 40 */ {0x0001, 0x8200}, -/* 43 */ {0x0009, 0x8201}, -/* 44 */ {0x0008, 0x8200}, -/* 45 */ {0x0001, 0x8200}, -/* 48 */ {0x000a, 0x8201}, -/* 49 */ {0x0008, 0x8200}, -/* 50 */ {0x0001, 0x8200}, -/* 53 */ {0x000b, 0x8201}, -/* 54 */ {0x0008, 0x8200}, -/* 55 */ {0x0001, 0x8200}, -/* 58 */ {0x000c, 0x8201}, -/* 59 */ {0x0008, 0x8200}, -/* 60 */ {0x0001, 0x8200}, -/* 63 */ {0x000d, 0x8201}, -/* 64 */ {0x0008, 0x8200}, -/* 65 */ {0x0001, 0x8200}, -/* 68 */ {0x000e, 0x8201}, -/* 69 */ {0x0008, 0x8200}, -/* 70 */ {0x0001, 0x8200}, -/* 73 */ {0x0007, 0x8201}, -/* 74 */ {0x0008, 0x8200}, -/* 75 */ {0x0001, 0x8200}, -/* 78 */ {0x000f, 0x8201}, -/* 79 */ {0x0008, 0x8200}, -/* 80 */ {0x0001, 0x8200}, - -/* 84 */ {0x0018, 0x8660}, -/* 85 */ {0x0010, 0x8201}, - -/* 86 */ {0x0008, 0x8200}, -/* 87 */ {0x0001, 0x8200}, -/* 90 */ {0x0011, 0x8201}, -/* 91 */ {0x0008, 0x8200}, -/* 92 */ {0x0001, 0x8200}, - -/* 95 */ {0x0000, 0x86b0}, -/* 96 */ {0x0034, 0x86b1}, -/* 97 */ {0x0000, 0x86b2}, -/* 98 */ {0x0049, 0x86b3}, -/* 99 */ {0x0000, 0x86b4}, -/* 100 */ {0x0000, 0x86b4}, - -/* 101 */ {0x0012, 0x8201}, -/* 102 */ {0x0008, 0x8200}, -/* 103 */ {0x0001, 0x8200}, -/* 106 */ {0x0013, 0x8201}, -/* 107 */ {0x0008, 0x8200}, -/* 108 */ {0x0001, 0x8200}, - -/* 111 */ {0x0001, 0x86b0}, -/* 112 */ {0x00aa, 0x86b1}, -/* 113 */ {0x0000, 0x86b2}, -/* 114 */ {0x00e4, 0x86b3}, -/* 115 */ {0x0000, 0x86b4}, -/* 116 */ {0x0000, 0x86b4}, - -/* 118 */ {0x0018, 0x8660}, - -/* 119 */ {0x0090, 0x8110}, -/* 120 */ {0x0001, 0x8114}, -/* 121 */ {0x0001, 0x8114}, -/* 122 */ {0x0001, 0x8114}, -/* 123 */ {0x0003, 0x8114}, - -/* 124 */ {0x0080, 0x8804}, -/* 157 */ {0x0003, 0x8801}, -/* 158 */ {0x0012, 0x8800}, -/* 160 */ {0x0004, 0x8801}, -/* 161 */ {0x0005, 0x8800}, -/* 163 */ {0x0005, 0x8801}, -/* 164 */ {0x0000, 0x8800}, -/* 166 */ {0x0006, 0x8801}, -/* 167 */ {0x0000, 0x8800}, -/* 169 */ {0x0007, 0x8801}, -/* 170 */ {0x0000, 0x8800}, -/* 172 */ {0x0008, 0x8801}, -/* 173 */ {0x0005, 0x8800}, -/* 175 */ {0x000a, 0x8700}, -/* 176 */ {0x000e, 0x8801}, -/* 177 */ {0x0004, 0x8800}, -/* 179 */ {0x0005, 0x8801}, -/* 180 */ {0x0047, 0x8800}, -/* 182 */ {0x0006, 0x8801}, -/* 183 */ {0x0000, 0x8800}, -/* 185 */ {0x0007, 0x8801}, -/* 186 */ {0x00c0, 0x8800}, -/* 188 */ {0x0008, 0x8801}, -/* 189 */ {0x0003, 0x8800}, -/* 191 */ {0x0013, 0x8801}, -/* 192 */ {0x0001, 0x8800}, -/* 194 */ {0x0009, 0x8801}, -/* 195 */ {0x0000, 0x8800}, -/* 197 */ {0x000a, 0x8801}, -/* 198 */ {0x0000, 0x8800}, -/* 200 */ {0x000b, 0x8801}, -/* 201 */ {0x0000, 0x8800}, -/* 203 */ {0x000c, 0x8801}, -/* 204 */ {0x0000, 0x8800}, -/* 206 */ {0x000e, 0x8801}, -/* 207 */ {0x0004, 0x8800}, -/* 209 */ {0x000f, 0x8801}, -/* 210 */ {0x0000, 0x8800}, -/* 212 */ {0x0010, 0x8801}, -/* 213 */ {0x0006, 0x8800}, -/* 215 */ {0x0011, 0x8801}, -/* 216 */ {0x0006, 0x8800}, -/* 218 */ {0x0012, 0x8801}, -/* 219 */ {0x0000, 0x8800}, -/* 221 */ {0x0013, 0x8801}, -/* 222 */ {0x0001, 0x8800}, - -/* 224 */ {0x000a, 0x8700}, -/* 225 */ {0x0000, 0x8702}, -/* 226 */ {0x0000, 0x8703}, -/* 227 */ {0x00c2, 0x8704}, -/* 228 */ {0x0001, 0x870c}, - -/* 229 */ {0x0044, 0x8600}, -/* 230 */ {0x0002, 0x8606}, -/* 231 */ {0x0064, 0x8607}, -/* 232 */ {0x003a, 0x8601}, -/* 233 */ {0x0008, 0x8602}, -/* 234 */ {0x0044, 0x8600}, -/* 235 */ {0x0018, 0x8617}, -/* 236 */ {0x0008, 0x8618}, -/* 237 */ {0x00a1, 0x8656}, -/* 238 */ {0x0004, 0x865b}, -/* 239 */ {0x0002, 0x865c}, -/* 240 */ {0x0058, 0x865d}, -/* 241 */ {0x0048, 0x865e}, -/* 242 */ {0x0012, 0x8608}, -/* 243 */ {0x002c, 0x8609}, -/* 244 */ {0x0002, 0x860a}, -/* 245 */ {0x002c, 0x860b}, -/* 246 */ {0x00db, 0x860c}, -/* 247 */ {0x00f9, 0x860d}, -/* 248 */ {0x00f1, 0x860e}, -/* 249 */ {0x00e3, 0x860f}, -/* 250 */ {0x002c, 0x8610}, -/* 251 */ {0x006c, 0x8651}, -/* 252 */ {0x0041, 0x8652}, -/* 253 */ {0x0059, 0x8653}, -/* 254 */ {0x0040, 0x8654}, -/* 255 */ {0x00fa, 0x8611}, -/* 256 */ {0x00ff, 0x8612}, -/* 257 */ {0x00f8, 0x8613}, -/* 258 */ {0x0000, 0x8614}, -/* 259 */ {0x0001, 0x863f}, -/* 260 */ {0x0000, 0x8640}, -/* 261 */ {0x0026, 0x8641}, -/* 262 */ {0x0045, 0x8642}, -/* 263 */ {0x0060, 0x8643}, -/* 264 */ {0x0075, 0x8644}, -/* 265 */ {0x0088, 0x8645}, -/* 266 */ {0x009b, 0x8646}, -/* 267 */ {0x00b0, 0x8647}, -/* 268 */ {0x00c5, 0x8648}, -/* 269 */ {0x00d2, 0x8649}, -/* 270 */ {0x00dc, 0x864a}, -/* 271 */ {0x00e5, 0x864b}, -/* 272 */ {0x00eb, 0x864c}, -/* 273 */ {0x00f0, 0x864d}, -/* 274 */ {0x00f6, 0x864e}, -/* 275 */ {0x00fa, 0x864f}, -/* 276 */ {0x00ff, 0x8650}, -/* 277 */ {0x0060, 0x8657}, -/* 278 */ {0x0010, 0x8658}, -/* 279 */ {0x0018, 0x8659}, -/* 280 */ {0x0005, 0x865a}, -/* 281 */ {0x0018, 0x8660}, -/* 282 */ {0x0003, 0x8509}, -/* 283 */ {0x0011, 0x850a}, -/* 284 */ {0x0032, 0x850b}, -/* 285 */ {0x0010, 0x850c}, -/* 286 */ {0x0021, 0x850d}, -/* 287 */ {0x0001, 0x8500}, -/* 288 */ {0x0000, 0x8508}, -/* 289 */ {0x0012, 0x8608}, -/* 290 */ {0x002c, 0x8609}, -/* 291 */ {0x0002, 0x860a}, -/* 292 */ {0x0039, 0x860b}, -/* 293 */ {0x00d0, 0x860c}, -/* 294 */ {0x00f7, 0x860d}, -/* 295 */ {0x00ed, 0x860e}, -/* 296 */ {0x00db, 0x860f}, -/* 297 */ {0x0039, 0x8610}, -/* 298 */ {0x0012, 0x8657}, -/* 299 */ {0x000c, 0x8619}, -/* 300 */ {0x0004, 0x861a}, -/* 301 */ {0x00a1, 0x8656}, -/* 302 */ {0x00c8, 0x8615}, -/* 303 */ {0x0032, 0x8616}, - -/* 306 */ {0x0030, 0x8112}, -/* 313 */ {0x0020, 0x8112}, -/* 314 */ {0x0020, 0x8112}, -/* 315 */ {0x000f, 0x8402}, -/* 316 */ {0x0000, 0x8403}, - -/* 317 */ {0x0090, 0x8110}, -/* 318 */ {0x0001, 0x8114}, -/* 319 */ {0x0001, 0x8114}, -/* 320 */ {0x0001, 0x8114}, -/* 321 */ {0x0003, 0x8114}, -/* 322 */ {0x0080, 0x8804}, - -/* 355 */ {0x0003, 0x8801}, -/* 356 */ {0x0012, 0x8800}, -/* 358 */ {0x0004, 0x8801}, -/* 359 */ {0x0005, 0x8800}, -/* 361 */ {0x0005, 0x8801}, -/* 362 */ {0x0047, 0x8800}, -/* 364 */ {0x0006, 0x8801}, -/* 365 */ {0x0000, 0x8800}, -/* 367 */ {0x0007, 0x8801}, -/* 368 */ {0x00c0, 0x8800}, -/* 370 */ {0x0008, 0x8801}, -/* 371 */ {0x0003, 0x8800}, -/* 373 */ {0x000a, 0x8700}, -/* 374 */ {0x000e, 0x8801}, -/* 375 */ {0x0004, 0x8800}, -/* 377 */ {0x0005, 0x8801}, -/* 378 */ {0x0047, 0x8800}, -/* 380 */ {0x0006, 0x8801}, -/* 381 */ {0x0000, 0x8800}, -/* 383 */ {0x0007, 0x8801}, -/* 384 */ {0x00c0, 0x8800}, -/* 386 */ {0x0008, 0x8801}, -/* 387 */ {0x0003, 0x8800}, -/* 389 */ {0x0013, 0x8801}, -/* 390 */ {0x0001, 0x8800}, -/* 392 */ {0x0009, 0x8801}, -/* 393 */ {0x0000, 0x8800}, -/* 395 */ {0x000a, 0x8801}, -/* 396 */ {0x0000, 0x8800}, -/* 398 */ {0x000b, 0x8801}, -/* 399 */ {0x0000, 0x8800}, -/* 401 */ {0x000c, 0x8801}, -/* 402 */ {0x0000, 0x8800}, -/* 404 */ {0x000e, 0x8801}, -/* 405 */ {0x0004, 0x8800}, -/* 407 */ {0x000f, 0x8801}, -/* 408 */ {0x0000, 0x8800}, -/* 410 */ {0x0010, 0x8801}, -/* 411 */ {0x0006, 0x8800}, -/* 413 */ {0x0011, 0x8801}, -/* 414 */ {0x0006, 0x8800}, -/* 416 */ {0x0012, 0x8801}, -/* 417 */ {0x0000, 0x8800}, -/* 419 */ {0x0013, 0x8801}, -/* 420 */ {0x0001, 0x8800}, -/* 422 */ {0x000a, 0x8700}, -/* 423 */ {0x0000, 0x8702}, -/* 424 */ {0x0000, 0x8703}, -/* 425 */ {0x00c2, 0x8704}, -/* 426 */ {0x0001, 0x870c}, -/* 427 */ {0x0044, 0x8600}, -/* 428 */ {0x0002, 0x8606}, -/* 429 */ {0x0064, 0x8607}, -/* 430 */ {0x003a, 0x8601}, -/* 431 */ {0x0008, 0x8602}, -/* 432 */ {0x0044, 0x8600}, -/* 433 */ {0x0018, 0x8617}, -/* 434 */ {0x0008, 0x8618}, -/* 435 */ {0x00a1, 0x8656}, -/* 436 */ {0x0004, 0x865b}, -/* 437 */ {0x0002, 0x865c}, -/* 438 */ {0x0058, 0x865d}, -/* 439 */ {0x0048, 0x865e}, -/* 440 */ {0x0012, 0x8608}, -/* 441 */ {0x002c, 0x8609}, -/* 442 */ {0x0002, 0x860a}, -/* 443 */ {0x002c, 0x860b}, -/* 444 */ {0x00db, 0x860c}, -/* 445 */ {0x00f9, 0x860d}, -/* 446 */ {0x00f1, 0x860e}, -/* 447 */ {0x00e3, 0x860f}, -/* 448 */ {0x002c, 0x8610}, -/* 449 */ {0x006c, 0x8651}, -/* 450 */ {0x0041, 0x8652}, -/* 451 */ {0x0059, 0x8653}, -/* 452 */ {0x0040, 0x8654}, -/* 453 */ {0x00fa, 0x8611}, -/* 454 */ {0x00ff, 0x8612}, -/* 455 */ {0x00f8, 0x8613}, -/* 456 */ {0x0000, 0x8614}, -/* 457 */ {0x0001, 0x863f}, -/* 458 */ {0x0000, 0x8640}, -/* 459 */ {0x0026, 0x8641}, -/* 460 */ {0x0045, 0x8642}, -/* 461 */ {0x0060, 0x8643}, -/* 462 */ {0x0075, 0x8644}, -/* 463 */ {0x0088, 0x8645}, -/* 464 */ {0x009b, 0x8646}, -/* 465 */ {0x00b0, 0x8647}, -/* 466 */ {0x00c5, 0x8648}, -/* 467 */ {0x00d2, 0x8649}, -/* 468 */ {0x00dc, 0x864a}, -/* 469 */ {0x00e5, 0x864b}, -/* 470 */ {0x00eb, 0x864c}, -/* 471 */ {0x00f0, 0x864d}, -/* 472 */ {0x00f6, 0x864e}, -/* 473 */ {0x00fa, 0x864f}, -/* 474 */ {0x00ff, 0x8650}, -/* 475 */ {0x0060, 0x8657}, -/* 476 */ {0x0010, 0x8658}, -/* 477 */ {0x0018, 0x8659}, -/* 478 */ {0x0005, 0x865a}, -/* 479 */ {0x0018, 0x8660}, -/* 480 */ {0x0003, 0x8509}, -/* 481 */ {0x0011, 0x850a}, -/* 482 */ {0x0032, 0x850b}, -/* 483 */ {0x0010, 0x850c}, -/* 484 */ {0x0021, 0x850d}, -/* 485 */ {0x0001, 0x8500}, -/* 486 */ {0x0000, 0x8508}, - -/* 487 */ {0x0012, 0x8608}, -/* 488 */ {0x002c, 0x8609}, -/* 489 */ {0x0002, 0x860a}, -/* 490 */ {0x0039, 0x860b}, -/* 491 */ {0x00d0, 0x860c}, -/* 492 */ {0x00f7, 0x860d}, -/* 493 */ {0x00ed, 0x860e}, -/* 494 */ {0x00db, 0x860f}, -/* 495 */ {0x0039, 0x8610}, -/* 496 */ {0x0012, 0x8657}, -/* 497 */ {0x0064, 0x8619}, + {0x0020, 0x8112}, + + {0x000f, 0x8402}, + {0x0000, 0x8403}, + + {0x0008, 0x8201}, + {0x0008, 0x8200}, + {0x0001, 0x8200}, + {0x0009, 0x8201}, + {0x0008, 0x8200}, + {0x0001, 0x8200}, + {0x000a, 0x8201}, + {0x0008, 0x8200}, + {0x0001, 0x8200}, + {0x000b, 0x8201}, + {0x0008, 0x8200}, + {0x0001, 0x8200}, + {0x000c, 0x8201}, + {0x0008, 0x8200}, + {0x0001, 0x8200}, + {0x000d, 0x8201}, + {0x0008, 0x8200}, + {0x0001, 0x8200}, + {0x000e, 0x8201}, + {0x0008, 0x8200}, + {0x0001, 0x8200}, + {0x0007, 0x8201}, + {0x0008, 0x8200}, + {0x0001, 0x8200}, + {0x000f, 0x8201}, + {0x0008, 0x8200}, + {0x0001, 0x8200}, + + {0x0018, 0x8660}, + {0x0010, 0x8201}, + + {0x0008, 0x8200}, + {0x0001, 0x8200}, + {0x0011, 0x8201}, + {0x0008, 0x8200}, + {0x0001, 0x8200}, + + {0x0000, 0x86b0}, + {0x0034, 0x86b1}, + {0x0000, 0x86b2}, + {0x0049, 0x86b3}, + {0x0000, 0x86b4}, + {0x0000, 0x86b4}, + + {0x0012, 0x8201}, + {0x0008, 0x8200}, + {0x0001, 0x8200}, + {0x0013, 0x8201}, + {0x0008, 0x8200}, + {0x0001, 0x8200}, + + {0x0001, 0x86b0}, + {0x00aa, 0x86b1}, + {0x0000, 0x86b2}, + {0x00e4, 0x86b3}, + {0x0000, 0x86b4}, + {0x0000, 0x86b4}, + + {0x0018, 0x8660}, + + {0x0090, 0x8110}, + {0x0001, 0x8114}, + {0x0001, 0x8114}, + {0x0001, 0x8114}, + {0x0003, 0x8114}, + + {0x0080, 0x8804}, + {0x0003, 0x8801}, + {0x0012, 0x8800}, + {0x0004, 0x8801}, + {0x0005, 0x8800}, + {0x0005, 0x8801}, + {0x0000, 0x8800}, + {0x0006, 0x8801}, + {0x0000, 0x8800}, + {0x0007, 0x8801}, + {0x0000, 0x8800}, + {0x0008, 0x8801}, + {0x0005, 0x8800}, + {0x000a, 0x8700}, + {0x000e, 0x8801}, + {0x0004, 0x8800}, + {0x0005, 0x8801}, + {0x0047, 0x8800}, + {0x0006, 0x8801}, + {0x0000, 0x8800}, + {0x0007, 0x8801}, + {0x00c0, 0x8800}, + {0x0008, 0x8801}, + {0x0003, 0x8800}, + {0x0013, 0x8801}, + {0x0001, 0x8800}, + {0x0009, 0x8801}, + {0x0000, 0x8800}, + {0x000a, 0x8801}, + {0x0000, 0x8800}, + {0x000b, 0x8801}, + {0x0000, 0x8800}, + {0x000c, 0x8801}, + {0x0000, 0x8800}, + {0x000e, 0x8801}, + {0x0004, 0x8800}, + {0x000f, 0x8801}, + {0x0000, 0x8800}, + {0x0010, 0x8801}, + {0x0006, 0x8800}, + {0x0011, 0x8801}, + {0x0006, 0x8800}, + {0x0012, 0x8801}, + {0x0000, 0x8800}, + {0x0013, 0x8801}, + {0x0001, 0x8800}, + + {0x000a, 0x8700}, + {0x0000, 0x8702}, + {0x0000, 0x8703}, + {0x00c2, 0x8704}, + {0x0001, 0x870c}, + + {0x0044, 0x8600}, + {0x0002, 0x8606}, + {0x0064, 0x8607}, + {0x003a, 0x8601}, + {0x0008, 0x8602}, + {0x0044, 0x8600}, + {0x0018, 0x8617}, + {0x0008, 0x8618}, + {0x00a1, 0x8656}, + {0x0004, 0x865b}, + {0x0002, 0x865c}, + {0x0058, 0x865d}, + {0x0048, 0x865e}, + {0x0012, 0x8608}, + {0x002c, 0x8609}, + {0x0002, 0x860a}, + {0x002c, 0x860b}, + {0x00db, 0x860c}, + {0x00f9, 0x860d}, + {0x00f1, 0x860e}, + {0x00e3, 0x860f}, + {0x002c, 0x8610}, + {0x006c, 0x8651}, + {0x0041, 0x8652}, + {0x0059, 0x8653}, + {0x0040, 0x8654}, + {0x00fa, 0x8611}, + {0x00ff, 0x8612}, + {0x00f8, 0x8613}, + {0x0000, 0x8614}, + {0x0001, 0x863f}, + {0x0000, 0x8640}, + {0x0026, 0x8641}, + {0x0045, 0x8642}, + {0x0060, 0x8643}, + {0x0075, 0x8644}, + {0x0088, 0x8645}, + {0x009b, 0x8646}, + {0x00b0, 0x8647}, + {0x00c5, 0x8648}, + {0x00d2, 0x8649}, + {0x00dc, 0x864a}, + {0x00e5, 0x864b}, + {0x00eb, 0x864c}, + {0x00f0, 0x864d}, + {0x00f6, 0x864e}, + {0x00fa, 0x864f}, + {0x00ff, 0x8650}, + {0x0060, 0x8657}, + {0x0010, 0x8658}, + {0x0018, 0x8659}, + {0x0005, 0x865a}, + {0x0018, 0x8660}, + {0x0003, 0x8509}, + {0x0011, 0x850a}, + {0x0032, 0x850b}, + {0x0010, 0x850c}, + {0x0021, 0x850d}, + {0x0001, 0x8500}, + {0x0000, 0x8508}, + {0x0012, 0x8608}, + {0x002c, 0x8609}, + {0x0002, 0x860a}, + {0x0039, 0x860b}, + {0x00d0, 0x860c}, + {0x00f7, 0x860d}, + {0x00ed, 0x860e}, + {0x00db, 0x860f}, + {0x0039, 0x8610}, + {0x0012, 0x8657}, + {0x000c, 0x8619}, + {0x0004, 0x861a}, + {0x00a1, 0x8656}, + {0x00c8, 0x8615}, + {0x0032, 0x8616}, + + {0x0030, 0x8112}, + {0x0020, 0x8112}, + {0x0020, 0x8112}, + {0x000f, 0x8402}, + {0x0000, 0x8403}, + + {0x0090, 0x8110}, + {0x0001, 0x8114}, + {0x0001, 0x8114}, + {0x0001, 0x8114}, + {0x0003, 0x8114}, + {0x0080, 0x8804}, + + {0x0003, 0x8801}, + {0x0012, 0x8800}, + {0x0004, 0x8801}, + {0x0005, 0x8800}, + {0x0005, 0x8801}, + {0x0047, 0x8800}, + {0x0006, 0x8801}, + {0x0000, 0x8800}, + {0x0007, 0x8801}, + {0x00c0, 0x8800}, + {0x0008, 0x8801}, + {0x0003, 0x8800}, + {0x000a, 0x8700}, + {0x000e, 0x8801}, + {0x0004, 0x8800}, + {0x0005, 0x8801}, + {0x0047, 0x8800}, + {0x0006, 0x8801}, + {0x0000, 0x8800}, + {0x0007, 0x8801}, + {0x00c0, 0x8800}, + {0x0008, 0x8801}, + {0x0003, 0x8800}, + {0x0013, 0x8801}, + {0x0001, 0x8800}, + {0x0009, 0x8801}, + {0x0000, 0x8800}, + {0x000a, 0x8801}, + {0x0000, 0x8800}, + {0x000b, 0x8801}, + {0x0000, 0x8800}, + {0x000c, 0x8801}, + {0x0000, 0x8800}, + {0x000e, 0x8801}, + {0x0004, 0x8800}, + {0x000f, 0x8801}, + {0x0000, 0x8800}, + {0x0010, 0x8801}, + {0x0006, 0x8800}, + {0x0011, 0x8801}, + {0x0006, 0x8800}, + {0x0012, 0x8801}, + {0x0000, 0x8800}, + {0x0013, 0x8801}, + {0x0001, 0x8800}, + {0x000a, 0x8700}, + {0x0000, 0x8702}, + {0x0000, 0x8703}, + {0x00c2, 0x8704}, + {0x0001, 0x870c}, + {0x0044, 0x8600}, + {0x0002, 0x8606}, + {0x0064, 0x8607}, + {0x003a, 0x8601}, + {0x0008, 0x8602}, + {0x0044, 0x8600}, + {0x0018, 0x8617}, + {0x0008, 0x8618}, + {0x00a1, 0x8656}, + {0x0004, 0x865b}, + {0x0002, 0x865c}, + {0x0058, 0x865d}, + {0x0048, 0x865e}, + {0x0012, 0x8608}, + {0x002c, 0x8609}, + {0x0002, 0x860a}, + {0x002c, 0x860b}, + {0x00db, 0x860c}, + {0x00f9, 0x860d}, + {0x00f1, 0x860e}, + {0x00e3, 0x860f}, + {0x002c, 0x8610}, + {0x006c, 0x8651}, + {0x0041, 0x8652}, + {0x0059, 0x8653}, + {0x0040, 0x8654}, + {0x00fa, 0x8611}, + {0x00ff, 0x8612}, + {0x00f8, 0x8613}, + {0x0000, 0x8614}, + {0x0001, 0x863f}, + {0x0000, 0x8640}, + {0x0026, 0x8641}, + {0x0045, 0x8642}, + {0x0060, 0x8643}, + {0x0075, 0x8644}, + {0x0088, 0x8645}, + {0x009b, 0x8646}, + {0x00b0, 0x8647}, + {0x00c5, 0x8648}, + {0x00d2, 0x8649}, + {0x00dc, 0x864a}, + {0x00e5, 0x864b}, + {0x00eb, 0x864c}, + {0x00f0, 0x864d}, + {0x00f6, 0x864e}, + {0x00fa, 0x864f}, + {0x00ff, 0x8650}, + {0x0060, 0x8657}, + {0x0010, 0x8658}, + {0x0018, 0x8659}, + {0x0005, 0x865a}, + {0x0018, 0x8660}, + {0x0003, 0x8509}, + {0x0011, 0x850a}, + {0x0032, 0x850b}, + {0x0010, 0x850c}, + {0x0021, 0x850d}, + {0x0001, 0x8500}, + {0x0000, 0x8508}, + + {0x0012, 0x8608}, + {0x002c, 0x8609}, + {0x0002, 0x860a}, + {0x0039, 0x860b}, + {0x00d0, 0x860c}, + {0x00f7, 0x860d}, + {0x00ed, 0x860e}, + {0x00db, 0x860f}, + {0x0039, 0x8610}, + {0x0012, 0x8657}, + {0x0064, 0x8619}, /* This line starts it all, it is not needed here */ /* since it has been build into the driver */ /* jfm: don't start now */ -/* 590 * {0x0030, 0x8112}, */ +/* {0x0030, 0x8112}, */ {} }; @@ -1136,14 +1069,14 @@ static const u16 spca508_vista_init_data[][2] = { {0x0008, 0x8200}, /* Clear register */ {0x0000, 0x870b}, /* Reset CTL3 */ {0x0020, 0x8112}, /* Video Drop packet enable */ - {0x0003, 0x8111}, /* Soft Reset compression, memory, TG & CDSP */ + {0x0003, 0x8111}, /* Soft Reset compression, memory, TG & CDSP */ {0x0000, 0x8110}, /* Disable everything */ {0x0000, 0x8114}, /* Software GPIO output data */ {0x0000, 0x8114}, {0x0003, 0x8111}, {0x0000, 0x8111}, - {0x0090, 0x8110}, /* Enable: SSI output, External 2X clock output */ + {0x0090, 0x8110}, /* Enable: SSI output, External 2X clock output */ {0x0020, 0x8112}, {0x0000, 0x8114}, {0x0001, 0x8114}, @@ -1156,191 +1089,143 @@ static const u16 spca508_vista_init_data[][2] = { {0x00ba, 0x8804}, /* SSI Slave address */ {0x0010, 0x8802}, /* 93.75kHz SSI Clock Two DataByte */ - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ - /* READ { 0, 0x0001, 0x8802 } -> - 0000: 10 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 10 */ {0x0010, 0x8802}, /* Will write 2 bytes (DATA1+DATA2) */ {0x0020, 0x8801}, /* Register address for SSI read/write */ {0x0044, 0x8805}, /* DATA2 */ {0x0004, 0x8800}, /* DATA1 -> write triggered */ - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ - /* READ { 0, 0x0001, 0x8802 } -> - 0000: 10 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 10 */ {0x0010, 0x8802}, {0x0009, 0x8801}, {0x0042, 0x8805}, {0x0001, 0x8800}, - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ - /* READ { 0, 0x0001, 0x8802 } -> - 0000: 10 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 10 */ {0x0010, 0x8802}, {0x003c, 0x8801}, {0x0001, 0x8805}, {0x0000, 0x8800}, - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ - /* READ { 0, 0x0001, 0x8802 } -> - 0000: 10 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 10 */ {0x0010, 0x8802}, {0x0001, 0x8801}, {0x000a, 0x8805}, {0x0000, 0x8800}, - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ - /* READ { 0, 0x0001, 0x8802 } -> - 0000: 10 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 10 */ {0x0010, 0x8802}, {0x0002, 0x8801}, {0x0000, 0x8805}, {0x0000, 0x8800}, - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ - /* READ { 0, 0x0001, 0x8802 } -> - 0000: 10 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 10 */ {0x0010, 0x8802}, {0x0003, 0x8801}, {0x0027, 0x8805}, {0x0001, 0x8800}, - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ - /* READ { 0, 0x0001, 0x8802 } -> - 0000: 10 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 10 */ {0x0010, 0x8802}, {0x0004, 0x8801}, {0x0065, 0x8805}, {0x0001, 0x8800}, - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ - /* READ { 0, 0x0001, 0x8802 } -> - 0000: 10 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 10 */ {0x0010, 0x8802}, {0x0005, 0x8801}, {0x0003, 0x8805}, {0x0000, 0x8800}, - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ - /* READ { 0, 0x0001, 0x8802 } -> - 0000: 10 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 10 */ {0x0010, 0x8802}, {0x0006, 0x8801}, {0x001c, 0x8805}, {0x0000, 0x8800}, - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ - /* READ { 0, 0x0001, 0x8802 } -> - 0000: 10 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 10 */ {0x0010, 0x8802}, {0x0007, 0x8801}, {0x002a, 0x8805}, {0x0000, 0x8800}, - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ - /* READ { 0, 0x0001, 0x8802 } -> - 0000: 10 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 10 */ {0x0010, 0x8802}, {0x000e, 0x8801}, {0x0000, 0x8805}, {0x0000, 0x8800}, - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ - /* READ { 0, 0x0001, 0x8802 } -> - 0000: 10 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 10 */ {0x0010, 0x8802}, {0x0028, 0x8801}, {0x002e, 0x8805}, {0x0000, 0x8800}, - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ - /* READ { 0, 0x0001, 0x8802 } -> - 0000: 10 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 10 */ {0x0010, 0x8802}, {0x0039, 0x8801}, {0x0013, 0x8805}, {0x0000, 0x8800}, - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ - /* READ { 0, 0x0001, 0x8802 } -> - 0000: 10 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 10 */ {0x0010, 0x8802}, {0x003b, 0x8801}, {0x000c, 0x8805}, {0x0000, 0x8800}, - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ - /* READ { 0, 0x0001, 0x8802 } -> - 0000: 10 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 10 */ {0x0010, 0x8802}, {0x0035, 0x8801}, {0x0028, 0x8805}, {0x0000, 0x8800}, - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ - /* READ { 0, 0x0001, 0x8802 } -> - 0000: 10 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ + /* READ { 0x0001, 0x8802 } -> 0000: 10 */ {0x0010, 0x8802}, {0x0009, 0x8801}, {0x0042, 0x8805}, {0x0001, 0x8800}, - /* READ { 0, 0x0001, 0x8803 } -> - 0000: 00 */ + /* READ { 0x0001, 0x8803 } -> 0000: 00 */ {0x0050, 0x8703}, {0x0002, 0x8704}, /* External input CKIx1 */ {0x0001, 0x870c}, /* Select CKOx2 output */ {0x009a, 0x8600}, /* Line memory Read Counter (L) */ - {0x0001, 0x8606}, /* 1 Line memory Read Counter (H) Result: (d)410 */ + {0x0001, 0x8606}, /* 1 Line memory Read Counter (H) Result: (d)410 */ {0x0023, 0x8601}, {0x0010, 0x8602}, {0x000a, 0x8603}, - {0x009A, 0x8600}, + {0x009a, 0x8600}, {0x0001, 0x865b}, /* 1 Horizontal Offset for Valid Pixel(L) */ {0x0003, 0x865c}, /* Vertical offset for valid lines (L) */ {0x0058, 0x865d}, /* Horizontal valid pixels window (L) */ @@ -1356,7 +1241,7 @@ static const u16 spca508_vista_init_data[][2] = { {0x0005, 0x860a}, /* ... */ {0x0025, 0x860b}, {0x00e1, 0x860c}, - {0x00fa, 0x860D}, + {0x00fa, 0x860d}, {0x00f4, 0x860e}, {0x00e8, 0x860f}, {0x0025, 0x8610}, /* A33 Coef. */ @@ -1371,11 +1256,12 @@ static const u16 spca508_vista_init_data[][2] = { {0x0040, 0x8654}, /* Gb gain for white balance (L) */ {0x0001, 0x863f}, /* Enable fixed gamma correction */ - {0x00a1, 0x8656}, /* Size - Window1: 256x256, Window2: 128x128 */ - /* UV division: UV no change, Enable New edge enhancement */ + {0x00a1, 0x8656}, /* Size - Window1: 256x256, Window2: 128x128, + * UV division: UV no change, + * Enable New edge enhancement */ {0x0018, 0x8657}, /* Edge gain high threshold */ {0x0020, 0x8658}, /* Edge gain low threshold */ - {0x000A, 0x8659}, /* Edge bandwidth high threshold */ + {0x000a, 0x8659}, /* Edge bandwidth high threshold */ {0x0005, 0x865a}, /* Edge bandwidth low threshold */ {0x0064, 0x8607}, /* UV filter enable */ @@ -1411,29 +1297,20 @@ static const u16 spca508_vista_init_data[][2] = { {0x0000, 0x86b4}, {0x001e, 0x8660}, - /* READ { 0, 0x0000, 0x8608 } -> - 0000: 13 */ - /* READ { 0, 0x0000, 0x8609 } -> - 0000: 28 */ - /* READ { 0, 0x0000, 0x8610 } -> - 0000: 05 */ - /* READ { 0, 0x0000, 0x8611 } -> - 0000: 25 */ - /* READ { 0, 0x0000, 0x8612 } -> - 0000: e1 */ - /* READ { 0, 0x0000, 0x8613 } -> - 0000: fa */ - /* READ { 0, 0x0000, 0x8614 } -> - 0000: f4 */ - /* READ { 0, 0x0000, 0x8615 } -> - 0000: e8 */ - /* READ { 0, 0x0000, 0x8616 } -> - 0000: 25 */ + /* READ { 0x0000, 0x8608 } -> 0000: 13 */ + /* READ { 0x0000, 0x8609 } -> 0000: 28 */ + /* READ { 0x0000, 0x8610 } -> 0000: 05 */ + /* READ { 0x0000, 0x8611 } -> 0000: 25 */ + /* READ { 0x0000, 0x8612 } -> 0000: e1 */ + /* READ { 0x0000, 0x8613 } -> 0000: fa */ + /* READ { 0x0000, 0x8614 } -> 0000: f4 */ + /* READ { 0x0000, 0x8615 } -> 0000: e8 */ + /* READ { 0x0000, 0x8616 } -> 0000: 25 */ {} }; static int reg_write(struct usb_device *dev, - __u16 index, __u16 value) + u16 index, u16 value) { int ret; @@ -1452,7 +1329,7 @@ static int reg_write(struct usb_device *dev, /* read 1 byte */ /* returns: negative is error, pos or zero is data */ static int reg_read(struct gspca_dev *gspca_dev, - __u16 index) /* wIndex */ + u16 index) /* wIndex */ { int ret; @@ -1474,16 +1351,16 @@ static int reg_read(struct gspca_dev *gspca_dev, } static int write_vector(struct gspca_dev *gspca_dev, - const u16 data[][2]) + const u16 (*data)[2]) { struct usb_device *dev = gspca_dev->dev; - int ret, i = 0; + int ret; - while (data[i][1] != 0) { - ret = reg_write(dev, data[i][1], data[i][0]); + while ((*data)[1] != 0) { + ret = reg_write(dev, (*data)[1], (*data)[0]); if (ret < 0) return ret; - i++; + data++; } return 0; } @@ -1495,6 +1372,15 @@ static int sd_config(struct gspca_dev *gspca_dev, struct sd *sd = (struct sd *) gspca_dev; struct cam *cam; int data1, data2; + const u16 (*init_data)[2]; + static const u16 (*(init_data_tb[]))[2] = { + spca508_vista_init_data, /* CreativeVista 0 */ + spca508_sightcam_init_data, /* HamaUSBSightcam 1 */ + spca508_sightcam2_init_data, /* HamaUSBSightcam2 2 */ + spca508cs110_init_data, /* IntelEasyPCCamera 3 */ + spca508cs110_init_data, /* MicroInnovationIC200 4 */ + spca508_init_data, /* ViewQuestVQ110 5 */ + }; /* Read from global register the USB product and vendor IDs, just to * prove that we can communicate with the device. This works, which @@ -1518,37 +1404,13 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->subtype = id->driver_info; sd->brightness = BRIGHTNESS_DEF; - switch (sd->subtype) { - case ViewQuestVQ110: - if (write_vector(gspca_dev, spca508_init_data)) - return -1; - break; - default: -/* case MicroInnovationIC200: */ -/* case IntelEasyPCCamera: */ - if (write_vector(gspca_dev, spca508cs110_init_data)) - return -1; - break; - case HamaUSBSightcam: - if (write_vector(gspca_dev, spca508_sightcam_init_data)) - return -1; - break; - case HamaUSBSightcam2: - if (write_vector(gspca_dev, spca508_sightcam2_init_data)) - return -1; - break; - case CreativeVista: - if (write_vector(gspca_dev, spca508_vista_init_data)) - return -1; - break; - } - return 0; /* success */ + init_data = init_data_tb[sd->subtype]; + return write_vector(gspca_dev, init_data); } /* this function is called at probe and resume time */ static int sd_init(struct gspca_dev *gspca_dev) { -/* write_vector(gspca_dev, spca508_open_data); */ return 0; } @@ -1556,7 +1418,7 @@ static int sd_start(struct gspca_dev *gspca_dev) { int mode; - mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; + mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; reg_write(gspca_dev->dev, 0x8500, mode); switch (mode) { case 0: @@ -1581,7 +1443,7 @@ static void sd_stopN(struct gspca_dev *gspca_dev) static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ - __u8 *data, /* isoc packet */ + u8 *data, /* isoc packet */ int len) /* iso packet length */ { switch (data[0]) { @@ -1594,7 +1456,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, data, len); break; case 0xff: /* drop */ -/* gspca_dev->last_packet_type = DISCARD_PACKET; */ break; default: data += 1; @@ -1608,7 +1469,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, static void setbrightness(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - __u8 brightness = sd->brightness; + u8 brightness = sd->brightness; /* MX seem contrast */ reg_write(gspca_dev->dev, 0x8651, brightness); diff --git a/linux/drivers/media/video/gspca/spca561.c b/linux/drivers/media/video/gspca/spca561.c index c8dd036a6..cb3313e19 100644 --- a/linux/drivers/media/video/gspca/spca561.c +++ b/linux/drivers/media/video/gspca/spca561.c @@ -34,8 +34,8 @@ struct sd { __u16 exposure; /* rev12a only */ #define EXPOSURE_MIN 1 -#define EXPOSURE_DEF 200 -#define EXPOSURE_MAX (4095 - 900) /* see set_exposure */ +#define EXPOSURE_DEF 700 /* == 10 fps */ +#define EXPOSURE_MAX (2047 + 325) /* see setexposure */ __u8 contrast; /* rev72a only */ #define CONTRAST_MIN 0x00 @@ -48,9 +48,9 @@ struct sd { #define BRIGHTNESS_MAX 0x3f __u8 white; -#define WHITE_MIN 1 -#define WHITE_DEF 0x40 -#define WHITE_MAX 0x7f +#define HUE_MIN 1 +#define HUE_DEF 0x40 +#define HUE_MAX 0x7f __u8 autogain; #define AUTOGAIN_MIN 0 @@ -58,9 +58,9 @@ struct sd { #define AUTOGAIN_MAX 1 __u8 gain; /* rev12a only */ -#define GAIN_MIN 0x0 -#define GAIN_DEF 0x24 -#define GAIN_MAX 0x24 +#define GAIN_MIN 0 +#define GAIN_DEF 63 +#define GAIN_MAX 255 #define EXPO12A_DEF 3 __u8 expo12a; /* expo/gain? for rev 12a */ @@ -492,7 +492,7 @@ static int sd_config(struct gspca_dev *gspca_dev, } sd->brightness = BRIGHTNESS_DEF; sd->contrast = CONTRAST_DEF; - sd->white = WHITE_DEF; + sd->white = HUE_DEF; sd->exposure = EXPOSURE_DEF; sd->autogain = AUTOGAIN_DEF; sd->gain = GAIN_DEF; @@ -580,8 +580,7 @@ static void setcontrast(struct gspca_dev *gspca_dev) static void setexposure(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - int expo; - int clock_divider; + int i, expo = 0; /* Register 0x8309 controls exposure for the spca561, the basic exposure setting goes from 1-2047, where 1 is completely @@ -595,16 +594,22 @@ static void setexposure(struct gspca_dev *gspca_dev) configure a divider for the base framerate which us used at the exposure setting of 1-300. These bits configure the base framerate according to the following formula: fps = 60 / (value + 2) */ - if (sd->exposure < 2048) { - expo = sd->exposure; - clock_divider = 0; - } else { - /* Add 900 to make the 0 setting of the second part of the - exposure equal to the 2047 setting of the first part. */ - expo = (sd->exposure - 2048) + 900; - clock_divider = 3; + + /* We choose to use the high bits setting the fixed framerate divisor + asap, as setting high basic exposure setting without the fixed + divider in combination with high gains makes the cam stop */ + int table[] = { 0, 450, 550, 625, EXPOSURE_MAX }; + + for (i = 0; i < ARRAY_SIZE(table) - 1; i++) { + if (sd->exposure <= table[i + 1]) { + expo = sd->exposure - table[i]; + if (i) + expo += 300; + expo |= i << 11; + break; + } } - expo |= clock_divider << 11; + gspca_dev->usb_buf[0] = expo; gspca_dev->usb_buf[1] = expo >> 8; reg_w_buf(gspca_dev, 0x8309, 2); @@ -615,7 +620,16 @@ static void setgain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - gspca_dev->usb_buf[0] = sd->gain; + /* gain reg low 6 bits 0-63 gain, bit 6 and 7, both double the + sensitivity when set, so 31 + one of them set == 63, and 15 + with both of them set == 63 */ + if (sd->gain < 64) + gspca_dev->usb_buf[0] = sd->gain; + else if (sd->gain < 128) + gspca_dev->usb_buf[0] = (sd->gain / 2) | 0x40; + else + gspca_dev->usb_buf[0] = (sd->gain / 4) | 0xC0; + gspca_dev->usb_buf[1] = 0; reg_w_buf(gspca_dev, 0x8335, 2); } @@ -660,8 +674,7 @@ static int sd_start_12a(struct gspca_dev *gspca_dev) reg_w_buf(gspca_dev, 0x8391, 8); reg_w_buf(gspca_dev, 0x8390, 8); setwhite(gspca_dev); - setautogain(gspca_dev); -/* setgain(gspca_dev); */ + setgain(gspca_dev); setexposure(gspca_dev); return 0; } @@ -793,18 +806,6 @@ static void do_autogain(struct gspca_dev *gspca_dev) i2c_write(gspca_dev, expotimes | pixelclk, 0x09); } break; - case Rev012A: - reg_r(gspca_dev, 0x8330, 2); - if (gspca_dev->usb_buf[1] > 0x08) { - gspca_dev->usb_buf[0] = ++sd->expo12a; - gspca_dev->usb_buf[1] = 0; - reg_w_buf(gspca_dev, 0x8339, 2); - } else if (gspca_dev->usb_buf[1] < 0x02) { - gspca_dev->usb_buf[0] = --sd->expo12a; - gspca_dev->usb_buf[1] = 0; - reg_w_buf(gspca_dev, 0x8339, 2); - } - break; } } @@ -959,13 +960,13 @@ static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val) static struct ctrl sd_ctrls_12a[] = { { { - .id = V4L2_CID_DO_WHITE_BALANCE, + .id = V4L2_CID_HUE, .type = V4L2_CTRL_TYPE_INTEGER, - .name = "White Balance", - .minimum = WHITE_MIN, - .maximum = WHITE_MAX, + .name = "Hue", + .minimum = HUE_MIN, + .maximum = HUE_MAX, .step = 1, - .default_value = WHITE_DEF, + .default_value = HUE_DEF, }, .set = sd_setwhite, .get = sd_getwhite, @@ -985,19 +986,6 @@ static struct ctrl sd_ctrls_12a[] = { }, { { - .id = V4L2_CID_AUTOGAIN, - .type = V4L2_CTRL_TYPE_BOOLEAN, - .name = "Auto Gain", - .minimum = AUTOGAIN_MIN, - .maximum = AUTOGAIN_MAX, - .step = 1, - .default_value = AUTOGAIN_DEF, - }, - .set = sd_setautogain, - .get = sd_getautogain, - }, - { - { .id = V4L2_CID_GAIN, .type = V4L2_CTRL_TYPE_INTEGER, .name = "Gain", @@ -1014,13 +1002,13 @@ static struct ctrl sd_ctrls_12a[] = { static struct ctrl sd_ctrls_72a[] = { { { - .id = V4L2_CID_DO_WHITE_BALANCE, + .id = V4L2_CID_HUE, .type = V4L2_CTRL_TYPE_INTEGER, - .name = "White Balance", - .minimum = WHITE_MIN, - .maximum = WHITE_MAX, + .name = "Hue", + .minimum = HUE_MIN, + .maximum = HUE_MAX, .step = 1, - .default_value = WHITE_DEF, + .default_value = HUE_DEF, }, .set = sd_setwhite, .get = sd_getwhite, @@ -1077,7 +1065,6 @@ static const struct sd_desc sd_desc_12a = { .stopN = sd_stopN, .stop0 = sd_stop0, .pkt_scan = sd_pkt_scan, -/* .dq_callback = do_autogain, * fixme */ }; static const struct sd_desc sd_desc_72a = { .name = MODULE_NAME, diff --git a/linux/drivers/media/video/gspca/stv06xx/Makefile b/linux/drivers/media/video/gspca/stv06xx/Makefile index feeaa94ab..2f3c3a606 100644 --- a/linux/drivers/media/video/gspca/stv06xx/Makefile +++ b/linux/drivers/media/video/gspca/stv06xx/Makefile @@ -3,7 +3,8 @@ obj-$(CONFIG_USB_STV06XX) += gspca_stv06xx.o gspca_stv06xx-objs := stv06xx.o \ stv06xx_vv6410.o \ stv06xx_hdcs.o \ - stv06xx_pb0100.o + stv06xx_pb0100.o \ + stv06xx_st6422.o EXTRA_CFLAGS += -Idrivers/media/video/gspca diff --git a/linux/drivers/media/video/gspca/stv06xx/stv06xx.c b/linux/drivers/media/video/gspca/stv06xx/stv06xx.c index 9dff2e65b..0da8e0de0 100644 --- a/linux/drivers/media/video/gspca/stv06xx/stv06xx.c +++ b/linux/drivers/media/video/gspca/stv06xx/stv06xx.c @@ -92,11 +92,10 @@ static int stv06xx_write_sensor_finish(struct sd *sd) { int err = 0; - if (IS_850(sd)) { + if (sd->bridge == BRIDGE_STV610) { struct usb_device *udev = sd->gspca_dev.dev; __u8 *buf = sd->gspca_dev.usb_buf; - /* Quickam Web needs an extra packet */ buf[0] = 0; err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x04, 0x40, 0x1704, 0, buf, 1, @@ -253,7 +252,7 @@ static int stv06xx_init(struct gspca_dev *gspca_dev) err = sd->sensor->init(sd); - if (dump_sensor) + if (dump_sensor && sd->sensor->dump) sd->sensor->dump(sd); return (err < 0) ? err : 0; @@ -293,8 +292,6 @@ static void stv06xx_stopN(struct gspca_dev *gspca_dev) goto out; err = sd->sensor->stop(sd); - if (err < 0) - goto out; out: if (err < 0) @@ -320,6 +317,8 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev, __u8 *data, /* isoc packet */ int len) /* iso packet length */ { + struct sd *sd = (struct sd *) gspca_dev; + PDEBUG(D_PACK, "Packet of length %d arrived", len); /* A packet may contain several frames @@ -345,14 +344,29 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev, if (len < chunk_len) { PDEBUG(D_ERR, "URB packet length is smaller" " than the specified chunk length"); + gspca_dev->last_packet_type = DISCARD_PACKET; return; } + /* First byte seem to be 02=data 2nd byte is unknown??? */ + if (sd->bridge == BRIDGE_ST6422 && (id & 0xFF00) == 0x0200) + goto frame_data; + switch (id) { case 0x0200: case 0x4200: +frame_data: PDEBUG(D_PACK, "Frame data packet detected"); + if (sd->to_skip) { + int skip = (sd->to_skip < chunk_len) ? + sd->to_skip : chunk_len; + data += skip; + len -= skip; + chunk_len -= skip; + sd->to_skip -= skip; + } + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, chunk_len); break; @@ -367,6 +381,9 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev, gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0); + if (sd->bridge == BRIDGE_ST6422) + sd->to_skip = gspca_dev->width * 4; + if (chunk_len) PDEBUG(D_ERR, "Chunk length is " "non-zero on a SOF"); @@ -397,8 +414,12 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev, /* Unknown chunk with 2 bytes of data, occurs 2-3 times per USB interrupt */ break; + case 0x42ff: + PDEBUG(D_PACK, "Chunk 0x42ff detected"); + /* Special chunk seen sometimes on the ST6422 */ + break; default: - PDEBUG(D_PACK, "Unknown chunk %d detected", id); + PDEBUG(D_PACK, "Unknown chunk 0x%04x detected", id); /* Unknown chunk */ } data += chunk_len; @@ -430,11 +451,16 @@ static int stv06xx_config(struct gspca_dev *gspca_dev, cam = &gspca_dev->cam; sd->desc = sd_desc; + sd->bridge = id->driver_info; gspca_dev->sd_desc = &sd->desc; if (dump_bridge) stv06xx_dump_bridge(sd); + sd->sensor = &stv06xx_sensor_st6422; + if (!sd->sensor->probe(sd)) + return 0; + sd->sensor = &stv06xx_sensor_vv6410; if (!sd->sensor->probe(sd)) return 0; @@ -459,9 +485,20 @@ static int stv06xx_config(struct gspca_dev *gspca_dev, /* -- module initialisation -- */ static const __devinitdata struct usb_device_id device_table[] = { - {USB_DEVICE(0x046d, 0x0840)}, /* QuickCam Express */ - {USB_DEVICE(0x046d, 0x0850)}, /* LEGO cam / QuickCam Web */ - {USB_DEVICE(0x046d, 0x0870)}, /* Dexxa WebCam USB */ + /* QuickCam Express */ + {USB_DEVICE(0x046d, 0x0840), .driver_info = BRIDGE_STV600 }, + /* LEGO cam / QuickCam Web */ + {USB_DEVICE(0x046d, 0x0850), .driver_info = BRIDGE_STV610 }, + /* Dexxa WebCam USB */ + {USB_DEVICE(0x046d, 0x0870), .driver_info = BRIDGE_STV602 }, + /* QuickCam Messenger */ + {USB_DEVICE(0x046D, 0x08F0), .driver_info = BRIDGE_ST6422 }, + /* QuickCam Communicate */ + {USB_DEVICE(0x046D, 0x08F5), .driver_info = BRIDGE_ST6422 }, + /* QuickCam Messenger (new) */ + {USB_DEVICE(0x046D, 0x08F6), .driver_info = BRIDGE_ST6422 }, + /* QuickCam Messenger (new) */ + {USB_DEVICE(0x046D, 0x08DA), .driver_info = BRIDGE_ST6422 }, {} }; MODULE_DEVICE_TABLE(usb, device_table); diff --git a/linux/drivers/media/video/gspca/stv06xx/stv06xx.h b/linux/drivers/media/video/gspca/stv06xx/stv06xx.h index 1207e7d17..bb73c3288 100644 --- a/linux/drivers/media/video/gspca/stv06xx/stv06xx.h +++ b/linux/drivers/media/video/gspca/stv06xx/stv06xx.h @@ -31,6 +31,7 @@ #define STV06XX_H_ #include "gspca.h" +#include "compat.h" #define MODULE_NAME "STV06xx" @@ -93,6 +94,17 @@ struct sd { /* Sensor private data */ void *sensor_priv; + + /* The first 4 lines produced by the stv6422 are no good, this keeps + track of how many bytes we still need to skip during a frame */ + int to_skip; + + /* Bridge / Camera type */ + u8 bridge; + #define BRIDGE_STV600 0 + #define BRIDGE_STV602 1 + #define BRIDGE_STV610 2 + #define BRIDGE_ST6422 3 /* With integrated sensor */ }; int stv06xx_write_bridge(struct sd *sd, u16 address, u16 i2c_data); diff --git a/linux/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/linux/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c index b16903814..3039ec208 100644 --- a/linux/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c +++ b/linux/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c @@ -434,7 +434,7 @@ static int hdcs_probe_1x00(struct sd *sd) hdcs->exp.er = 100; /* - * Frame rate on HDCS-1000 0x46D:0x840 depends on PSMP: + * Frame rate on HDCS-1000 with STV600 depends on PSMP: * 4 = doesn't work at all * 5 = 7.8 fps, * 6 = 6.9 fps, @@ -443,7 +443,7 @@ static int hdcs_probe_1x00(struct sd *sd) * 15 = 4.4 fps, * 31 = 2.8 fps * - * Frame rate on HDCS-1000 0x46D:0x870 depends on PSMP: + * Frame rate on HDCS-1000 with STV602 depends on PSMP: * 15 = doesn't work at all * 18 = doesn't work at all * 19 = 7.3 fps @@ -453,7 +453,7 @@ static int hdcs_probe_1x00(struct sd *sd) * 24 = 6.3 fps * 30 = 5.4 fps */ - hdcs->psmp = IS_870(sd) ? 20 : 5; + hdcs->psmp = (sd->bridge == BRIDGE_STV602) ? 20 : 5; sd->sensor_priv = hdcs; @@ -530,7 +530,7 @@ static int hdcs_init(struct sd *sd) int i, err = 0; /* Set the STV0602AA in STV0600 emulation mode */ - if (IS_870(sd)) + if (sd->bridge == BRIDGE_STV602) stv06xx_write_bridge(sd, STV_STV0600_EMULATION, 1); /* Execute the bridge init */ @@ -558,7 +558,7 @@ static int hdcs_init(struct sd *sd) return err; /* Set PGA sample duration - (was 0x7E for IS_870, but caused slow framerate with HDCS-1020) */ + (was 0x7E for the STV602, but caused slow framerate with HDCS-1020) */ if (IS_1020(sd)) err = stv06xx_write_sensor(sd, HDCS_TCTRL, (HDCS_ADC_START_SIG_DUR << 6) | hdcs->psmp); diff --git a/linux/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h b/linux/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h index e88c42f7d..934b9cebc 100644 --- a/linux/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h +++ b/linux/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h @@ -32,14 +32,13 @@ #include "stv06xx.h" -#define IS_850(sd) ((sd)->gspca_dev.dev->descriptor.idProduct == 0x850) -#define IS_870(sd) ((sd)->gspca_dev.dev->descriptor.idProduct == 0x870) #define IS_1020(sd) ((sd)->sensor == &stv06xx_sensor_hdcs1020) extern const struct stv06xx_sensor stv06xx_sensor_vv6410; extern const struct stv06xx_sensor stv06xx_sensor_hdcs1x00; extern const struct stv06xx_sensor stv06xx_sensor_hdcs1020; extern const struct stv06xx_sensor stv06xx_sensor_pb0100; +extern const struct stv06xx_sensor stv06xx_sensor_st6422; struct stv06xx_sensor { /* Defines the name of a sensor */ diff --git a/linux/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c b/linux/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c new file mode 100644 index 000000000..87cb5b9dd --- /dev/null +++ b/linux/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c @@ -0,0 +1,453 @@ +/* + * Support for the sensor part which is integrated (I think) into the + * st6422 stv06xx alike bridge, as its integrated there are no i2c writes + * but instead direct bridge writes. + * + * Copyright (c) 2009 Hans de Goede <hdegoede@redhat.com> + * + * Strongly based on qc-usb-messenger, which is: + * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher + * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland + * Copyright (c) 2002, 2003 Tuukka Toivonen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include "stv06xx_st6422.h" + +static struct v4l2_pix_format st6422_mode[] = { + /* Note we actually get 124 lines of data, of which we skip the 4st + 4 as they are garbage */ + { + 162, + 120, + V4L2_PIX_FMT_SGRBG8, + V4L2_FIELD_NONE, + .sizeimage = 162 * 120, + .bytesperline = 162, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 + }, + /* Note we actually get 248 lines of data, of which we skip the 4st + 4 as they are garbage, and we tell the app it only gets the + first 240 of the 244 lines it actually gets, so that it ignores + the last 4. */ + { + 324, + 240, + V4L2_PIX_FMT_SGRBG8, + V4L2_FIELD_NONE, + .sizeimage = 324 * 244, + .bytesperline = 324, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0 + }, +}; + +static const struct ctrl st6422_ctrl[] = { +#define BRIGHTNESS_IDX 0 + { + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = 0, + .maximum = 31, + .step = 1, + .default_value = 3 + }, + .set = st6422_set_brightness, + .get = st6422_get_brightness + }, +#define CONTRAST_IDX 1 + { + { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Contrast", + .minimum = 0, + .maximum = 15, + .step = 1, + .default_value = 11 + }, + .set = st6422_set_contrast, + .get = st6422_get_contrast + }, +#define GAIN_IDX 2 + { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 64 + }, + .set = st6422_set_gain, + .get = st6422_get_gain + }, +#define EXPOSURE_IDX 3 + { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 0, + .maximum = 1023, + .step = 1, + .default_value = 256 + }, + .set = st6422_set_exposure, + .get = st6422_get_exposure + }, +}; + +static int st6422_probe(struct sd *sd) +{ + int i; + s32 *sensor_settings; + + if (sd->bridge != BRIDGE_ST6422) + return -ENODEV; + + info("st6422 sensor detected"); + + sensor_settings = kmalloc(ARRAY_SIZE(st6422_ctrl) * sizeof(s32), + GFP_KERNEL); + if (!sensor_settings) + return -ENOMEM; + + sd->gspca_dev.cam.cam_mode = st6422_mode; + sd->gspca_dev.cam.nmodes = ARRAY_SIZE(st6422_mode); + sd->desc.ctrls = st6422_ctrl; + sd->desc.nctrls = ARRAY_SIZE(st6422_ctrl); + sd->sensor_priv = sensor_settings; + + for (i = 0; i < sd->desc.nctrls; i++) + sensor_settings[i] = st6422_ctrl[i].qctrl.default_value; + + return 0; +} + +static int st6422_init(struct sd *sd) +{ + int err = 0, i; + + const u16 st6422_bridge_init[][2] = { + { STV_ISO_ENABLE, 0x00 }, /* disable capture */ + { 0x1436, 0x00 }, + { 0x1432, 0x03 }, /* 0x00-0x1F brightness */ + { 0x143a, 0xF9 }, /* 0x00-0x0F contrast */ + { 0x0509, 0x38 }, /* R */ + { 0x050a, 0x38 }, /* G */ + { 0x050b, 0x38 }, /* B */ + { 0x050c, 0x2A }, + { 0x050d, 0x01 }, + + + { 0x1431, 0x00 }, /* 0x00-0x07 ??? */ + { 0x1433, 0x34 }, /* 160x120, 0x00-0x01 night filter */ + { 0x1438, 0x18 }, /* 640x480 */ +/* 18 bayes */ +/* 10 compressed? */ + + { 0x1439, 0x00 }, +/* antiflimmer?? 0xa2 ger perfekt bild mot monitor */ + + { 0x143b, 0x05 }, + { 0x143c, 0x00 }, /* 0x00-0x01 - ??? */ + + +/* shutter time 0x0000-0x03FF */ +/* low value give good picures on moving objects (but requires much light) */ +/* high value gives good picures in darkness (but tends to be overexposed) */ + { 0x143e, 0x01 }, + { 0x143d, 0x00 }, + + { 0x1442, 0xe2 }, +/* write: 1x1x xxxx */ +/* read: 1x1x xxxx */ +/* bit 5 == button pressed and hold if 0 */ +/* write 0xe2,0xea */ + +/* 0x144a */ +/* 0x00 init */ +/* bit 7 == button has been pressed, but not handled */ + +/* interrupt */ +/* if(urb->iso_frame_desc[i].status == 0x80) { */ +/* if(urb->iso_frame_desc[i].status == 0x88) { */ + + { 0x1500, 0xd0 }, + { 0x1500, 0xd0 }, + { 0x1500, 0x50 }, /* 0x00 - 0xFF 0x80 == compr ? */ + + { 0x1501, 0xaf }, +/* high val-> ljus area blir morkare. */ +/* low val -> ljus area blir ljusare. */ + { 0x1502, 0xc2 }, +/* high val-> ljus area blir morkare. */ +/* low val -> ljus area blir ljusare. */ + { 0x1503, 0x45 }, +/* high val-> ljus area blir morkare. */ +/* low val -> ljus area blir ljusare. */ + + { 0x1505, 0x02 }, +/* 2 : 324x248 80352 bytes */ +/* 7 : 248x162 40176 bytes */ +/* c+f: 162*124 20088 bytes */ + + { 0x150e, 0x8e }, + { 0x150f, 0x37 }, + { 0x15c0, 0x00 }, + { 0x15c1, 1023 }, /* 160x120, ISOC_PACKET_SIZE */ + { 0x15c3, 0x08 }, /* 0x04/0x14 ... test pictures ??? */ + + + { 0x143f, 0x01 }, /* commit settings */ + + }; + + for (i = 0; i < ARRAY_SIZE(st6422_bridge_init) && !err; i++) { + err = stv06xx_write_bridge(sd, st6422_bridge_init[i][0], + st6422_bridge_init[i][1]); + } + + return err; +} + +static void st6422_disconnect(struct sd *sd) +{ + sd->sensor = NULL; + kfree(sd->sensor_priv); +} + +static int st6422_start(struct sd *sd) +{ + int err, packet_size; + struct cam *cam = &sd->gspca_dev.cam; + s32 *sensor_settings = sd->sensor_priv; + struct usb_host_interface *alt; + struct usb_interface *intf; + + intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); + alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); + if (!alt) { + PDEBUG(D_ERR, "Couldn't get altsetting"); + return -EIO; + } + + packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); + err = stv06xx_write_bridge(sd, 0x15c1, packet_size); + if (err < 0) + return err; + + if (cam->cam_mode[sd->gspca_dev.curr_mode].priv) + err = stv06xx_write_bridge(sd, 0x1505, 0x0f); + else + err = stv06xx_write_bridge(sd, 0x1505, 0x02); + if (err < 0) + return err; + + err = st6422_set_brightness(&sd->gspca_dev, + sensor_settings[BRIGHTNESS_IDX]); + if (err < 0) + return err; + + err = st6422_set_contrast(&sd->gspca_dev, + sensor_settings[CONTRAST_IDX]); + if (err < 0) + return err; + + err = st6422_set_exposure(&sd->gspca_dev, + sensor_settings[EXPOSURE_IDX]); + if (err < 0) + return err; + + err = st6422_set_gain(&sd->gspca_dev, + sensor_settings[GAIN_IDX]); + if (err < 0) + return err; + + PDEBUG(D_STREAM, "Starting stream"); + + return 0; +} + +static int st6422_stop(struct sd *sd) +{ + PDEBUG(D_STREAM, "Halting stream"); + + return 0; +} + +static int st6422_get_brightness(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[BRIGHTNESS_IDX]; + + PDEBUG(D_V4L2, "Read brightness %d", *val); + + return 0; +} + +static int st6422_set_brightness(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + sensor_settings[BRIGHTNESS_IDX] = val; + + if (!gspca_dev->streaming) + return 0; + + /* val goes from 0 -> 31 */ + PDEBUG(D_V4L2, "Set brightness to %d", val); + err = stv06xx_write_bridge(sd, 0x1432, val); + if (err < 0) + return err; + + /* commit settings */ + err = stv06xx_write_bridge(sd, 0x143f, 0x01); + return (err < 0) ? err : 0; +} + +static int st6422_get_contrast(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[CONTRAST_IDX]; + + PDEBUG(D_V4L2, "Read contrast %d", *val); + + return 0; +} + +static int st6422_set_contrast(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + sensor_settings[CONTRAST_IDX] = val; + + if (!gspca_dev->streaming) + return 0; + + /* Val goes from 0 -> 15 */ + PDEBUG(D_V4L2, "Set contrast to %d\n", val); + err = stv06xx_write_bridge(sd, 0x143a, 0xf0 | val); + if (err < 0) + return err; + + /* commit settings */ + err = stv06xx_write_bridge(sd, 0x143f, 0x01); + return (err < 0) ? err : 0; +} + +static int st6422_get_gain(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[GAIN_IDX]; + + PDEBUG(D_V4L2, "Read gain %d", *val); + + return 0; +} + +static int st6422_set_gain(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + sensor_settings[GAIN_IDX] = val; + + if (!gspca_dev->streaming) + return 0; + + PDEBUG(D_V4L2, "Set gain to %d", val); + + /* Set red, green, blue, gain */ + err = stv06xx_write_bridge(sd, 0x0509, val); + if (err < 0) + return err; + + err = stv06xx_write_bridge(sd, 0x050a, val); + if (err < 0) + return err; + + err = stv06xx_write_bridge(sd, 0x050b, val); + if (err < 0) + return err; + + /* 2 mystery writes */ + err = stv06xx_write_bridge(sd, 0x050c, 0x2a); + if (err < 0) + return err; + + err = stv06xx_write_bridge(sd, 0x050d, 0x01); + if (err < 0) + return err; + + /* commit settings */ + err = stv06xx_write_bridge(sd, 0x143f, 0x01); + return (err < 0) ? err : 0; +} + +static int st6422_get_exposure(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + *val = sensor_settings[EXPOSURE_IDX]; + + PDEBUG(D_V4L2, "Read exposure %d", *val); + + return 0; +} + +static int st6422_set_exposure(struct gspca_dev *gspca_dev, __s32 val) +{ + int err; + struct sd *sd = (struct sd *) gspca_dev; + s32 *sensor_settings = sd->sensor_priv; + + sensor_settings[EXPOSURE_IDX] = val; + + if (!gspca_dev->streaming) + return 0; + + PDEBUG(D_V4L2, "Set exposure to %d\n", val); + err = stv06xx_write_bridge(sd, 0x143d, val & 0xff); + if (err < 0) + return err; + + err = stv06xx_write_bridge(sd, 0x143e, val >> 8); + if (err < 0) + return err; + + /* commit settings */ + err = stv06xx_write_bridge(sd, 0x143f, 0x01); + return (err < 0) ? err : 0; +} diff --git a/linux/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h b/linux/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h new file mode 100644 index 000000000..b2d45fe50 --- /dev/null +++ b/linux/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h @@ -0,0 +1,59 @@ +/* + * Support for the sensor part which is integrated (I think) into the + * st6422 stv06xx alike bridge, as its integrated there are no i2c writes + * but instead direct bridge writes. + * + * Copyright (c) 2009 Hans de Goede <hdegoede@redhat.com> + * + * Strongly based on qc-usb-messenger, which is: + * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher + * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland + * Copyright (c) 2002, 2003 Tuukka Toivonen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef STV06XX_ST6422_H_ +#define STV06XX_ST6422_H_ + +#include "stv06xx_sensor.h" + +static int st6422_probe(struct sd *sd); +static int st6422_start(struct sd *sd); +static int st6422_init(struct sd *sd); +static int st6422_stop(struct sd *sd); +static void st6422_disconnect(struct sd *sd); + +/* V4L2 controls supported by the driver */ +static int st6422_get_brightness(struct gspca_dev *gspca_dev, __s32 *val); +static int st6422_set_brightness(struct gspca_dev *gspca_dev, __s32 val); +static int st6422_get_contrast(struct gspca_dev *gspca_dev, __s32 *val); +static int st6422_set_contrast(struct gspca_dev *gspca_dev, __s32 val); +static int st6422_get_gain(struct gspca_dev *gspca_dev, __s32 *val); +static int st6422_set_gain(struct gspca_dev *gspca_dev, __s32 val); +static int st6422_get_exposure(struct gspca_dev *gspca_dev, __s32 *val); +static int st6422_set_exposure(struct gspca_dev *gspca_dev, __s32 val); + +const struct stv06xx_sensor stv06xx_sensor_st6422 = { + .name = "ST6422", + .init = st6422_init, + .probe = st6422_probe, + .start = st6422_start, + .stop = st6422_stop, + .disconnect = st6422_disconnect, +}; + +#endif diff --git a/linux/drivers/media/video/hdpvr/hdpvr-video.c b/linux/drivers/media/video/hdpvr/hdpvr-video.c index 3e6ffee8d..ccd47f57f 100644 --- a/linux/drivers/media/video/hdpvr/hdpvr-video.c +++ b/linux/drivers/media/video/hdpvr/hdpvr-video.c @@ -181,7 +181,7 @@ static int hdpvr_submit_buffers(struct hdpvr_device *dev) buff_list); if (buf->status != BUFSTAT_AVAILABLE) { v4l2_err(&dev->v4l2_dev, - "buffer not marked as availbale\n"); + "buffer not marked as available\n"); ret = -EFAULT; goto err; } diff --git a/linux/drivers/media/video/ir-kbd-i2c.c b/linux/drivers/media/video/ir-kbd-i2c.c index 7bae57ad3..cdf369129 100644 --- a/linux/drivers/media/video/ir-kbd-i2c.c +++ b/linux/drivers/media/video/ir-kbd-i2c.c @@ -75,7 +75,11 @@ static int get_key_haup_common(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw, int start, range, toggle, dev, code, ircode; /* poll IR chip */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) if (size != i2c_master_recv(&ir->c,buf,size)) +#else + if (size != i2c_master_recv(ir->c, buf, size)) +#endif return -EIO; /* split rc5 data block ... */ @@ -138,7 +142,11 @@ static int get_key_pixelview(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char b; /* poll IR chip */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) if (1 != i2c_master_recv(&ir->c,&b,1)) { +#else + if (1 != i2c_master_recv(ir->c, &b, 1)) { +#endif dprintk(1,"read error\n"); return -EIO; } @@ -152,7 +160,11 @@ static int get_key_pv951(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char b; /* poll IR chip */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) if (1 != i2c_master_recv(&ir->c,&b,1)) { +#else + if (1 != i2c_master_recv(ir->c, &b, 1)) { +#endif dprintk(1,"read error\n"); return -EIO; } @@ -172,7 +184,11 @@ static int get_key_fusionhdtv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char buf[4]; /* poll IR chip */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) if (4 != i2c_master_recv(&ir->c,buf,4)) { +#else + if (4 != i2c_master_recv(ir->c, buf, 4)) { +#endif dprintk(1,"read error\n"); return -EIO; } @@ -196,7 +212,11 @@ static int get_key_knc1(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char b; /* poll IR chip */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) if (1 != i2c_master_recv(&ir->c,&b,1)) { +#else + if (1 != i2c_master_recv(ir->c, &b, 1)) { +#endif dprintk(1,"read error\n"); return -EIO; } @@ -223,12 +243,24 @@ static int get_key_avermedia_cardbus(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) { unsigned char subaddr, key, keygroup; +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) struct i2c_msg msg[] = { { .addr = ir->c.addr, .flags = 0, +#else + struct i2c_msg msg[] = { { .addr = ir->c->addr, .flags = 0, +#endif .buf = &subaddr, .len = 1}, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) { .addr = ir->c.addr, .flags = I2C_M_RD, +#else + { .addr = ir->c->addr, .flags = I2C_M_RD, +#endif .buf = &key, .len = 1} }; subaddr = 0x0d; +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) if (2 != i2c_transfer(ir->c.adapter, msg, 2)) { +#else + if (2 != i2c_transfer(ir->c->adapter, msg, 2)) { +#endif dprintk(1, "read error\n"); return -EIO; } @@ -238,7 +270,11 @@ static int get_key_avermedia_cardbus(struct IR_i2c *ir, subaddr = 0x0b; msg[1].buf = &keygroup; +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) if (2 != i2c_transfer(ir->c.adapter, msg, 2)) { +#else + if (2 != i2c_transfer(ir->c->adapter, msg, 2)) { +#endif dprintk(1, "read error\n"); return -EIO; } @@ -295,7 +331,11 @@ static void ir_work(struct work_struct *work) /* MSI TV@nywhere Plus requires more frequent polling otherwise it will miss some keypresses */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) if (ir->c.adapter->id == I2C_HW_SAA7134 && ir->c.addr == 0x30) +#else + if (ir->c->adapter->id == I2C_HW_SAA7134 && ir->c->addr == 0x30) +#endif polling_interval = 50; ir_key_poll(ir); @@ -304,8 +344,9 @@ static void ir_work(struct work_struct *work) /* ----------------------------------------------------------------------- */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) static int ir_attach(struct i2c_adapter *adap, int addr, - unsigned short flags, int kind); + unsigned short flags, int kind); static int ir_detach(struct i2c_client *client); static int ir_probe(struct i2c_adapter *adap); @@ -313,25 +354,32 @@ static struct i2c_driver driver = { .driver = { .name = "ir-kbd-i2c", }, - .id = I2C_DRIVERID_INFRARED, - .attach_adapter = ir_probe, - .detach_client = ir_detach, + .id = I2C_DRIVERID_INFRARED, + .attach_adapter = ir_probe, + .detach_client = ir_detach, }; - -static struct i2c_client client_template = + +static struct i2c_client client = { - .name = "unset", - .driver = &driver -}; + .name = "unset", + .driver = &driver + }; static int ir_attach(struct i2c_adapter *adap, int addr, - unsigned short flags, int kind) + unsigned short flags, int kind) +#else +static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) +#endif { IR_KEYTAB_TYPE *ir_codes = NULL; - char *name; + const char *name = NULL; int ir_type; struct IR_i2c *ir; struct input_dev *input_dev; +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) + struct i2c_adapter *adap = client->adapter; + unsigned short addr = client->addr; +#endif int err; ir = kzalloc(sizeof(struct IR_i2c),GFP_KERNEL); @@ -341,13 +389,18 @@ static int ir_attach(struct i2c_adapter *adap, int addr, goto err_out_free; } - ir->c = client_template; + ir->c = client; ir->input = input_dev; +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) ir->c.adapter = adap; ir->c.addr = addr; + snprintf(ir->c.name, sizeof(ir->c.name), "ir-kbd"); i2c_set_clientdata(&ir->c, ir); +#else + i2c_set_clientdata(client, ir); +#endif switch(addr) { case 0x64: @@ -412,16 +465,40 @@ static int ir_attach(struct i2c_adapter *adap, int addr, ir_codes = ir_codes_avermedia_cardbus; break; default: - /* shouldn't happen */ - printk(DEVNAME ": Huh? unknown i2c address (0x%02x)?\n", addr); + dprintk(1, DEVNAME ": Unsupported i2c address 0x%02x\n", addr); + err = -ENODEV; + goto err_out_free; + } + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) + /* Let the caller override settings */ + if (client->dev.platform_data) { + const struct IR_i2c_init_data *init_data = + client->dev.platform_data; + + ir_codes = init_data->ir_codes; + name = init_data->name; + ir->get_key = init_data->get_key; + } + + /* Make sure we are all setup before going on */ + if (!name || !ir->get_key || !ir_codes) { + dprintk(1, DEVNAME ": Unsupported device at address 0x%02x\n", + addr); err = -ENODEV; goto err_out_free; } +#endif /* Sets name */ - snprintf(ir->c.name, sizeof(ir->c.name), "i2c IR (%s)", name); +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) + snprintf(ir->c.name, sizeof(ir->c.name), "i2c IR (%s)", name); +#else + snprintf(ir->name, sizeof(ir->name), "i2c IR (%s)", name); +#endif ir->ir_codes = ir_codes; +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) /* register i2c device * At device register, IR codes may be changed to be * board dependent. @@ -437,19 +514,29 @@ static int ir_attach(struct i2c_adapter *adap, int addr, } /* Phys addr can only be set after attaching (for ir->c.dev) */ +#endif snprintf(ir->phys, sizeof(ir->phys), "%s/%s/ir0", +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) dev_name(&ir->c.adapter->dev), dev_name(&ir->c.dev)); +#else + dev_name(&adap->dev), + dev_name(&client->dev)); +#endif /* init + register input device */ ir_input_init(input_dev, &ir->ir, ir_type, ir->ir_codes); input_dev->id.bustype = BUS_I2C; - input_dev->name = ir->c.name; + input_dev->name = ir->name; input_dev->phys = ir->phys; err = input_register_device(ir->input); if (err) +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) goto err_out_detach; +#else + goto err_out_free; +#endif printk(DEVNAME ": %s detected at %s [%s]\n", ir->input->name, ir->input->phys, adap->name); @@ -464,30 +551,43 @@ static int ir_attach(struct i2c_adapter *adap, int addr, return 0; +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) err_out_detach: i2c_detach_client(&ir->c); +#endif err_out_free: input_free_device(input_dev); kfree(ir); return err; } +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) static int ir_detach(struct i2c_client *client) +#else +static int ir_remove(struct i2c_client *client) +#endif { struct IR_i2c *ir = i2c_get_clientdata(client); /* kill outstanding polls */ cancel_delayed_work_sync(&ir->work); +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) /* unregister devices */ +#else + /* unregister device */ +#endif input_unregister_device(ir->input); +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) i2c_detach_client(&ir->c); +#endif /* free memory */ kfree(ir); return 0; } +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) static int ir_probe(struct i2c_adapter *adap) { @@ -593,6 +693,23 @@ static int ir_probe(struct i2c_adapter *adap) return 0; } +#else +static const struct i2c_device_id ir_kbd_id[] = { + /* Generic entry for any IR receiver */ + { "ir_video", 0 }, + /* IR device specific entries could be added here */ + { } +}; + +static struct i2c_driver driver = { + .driver = { + .name = "ir-kbd-i2c", + }, + .probe = ir_probe, + .remove = ir_remove, + .id_table = ir_kbd_id, +}; +#endif /* ----------------------------------------------------------------------- */ diff --git a/linux/drivers/media/video/ivtv/ivtv-controls.c b/linux/drivers/media/video/ivtv/ivtv-controls.c index 84995bcf4..a3b77ed3f 100644 --- a/linux/drivers/media/video/ivtv/ivtv-controls.c +++ b/linux/drivers/media/video/ivtv/ivtv-controls.c @@ -60,6 +60,8 @@ int ivtv_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl) switch (qctrl->id) { /* Standard V4L2 controls */ + case V4L2_CID_USER_CLASS: + return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0); case V4L2_CID_BRIGHTNESS: case V4L2_CID_HUE: case V4L2_CID_SATURATION: diff --git a/linux/drivers/media/video/ivtv/ivtv-driver.c b/linux/drivers/media/video/ivtv/ivtv-driver.c index edb81a948..9f91838d7 100644 --- a/linux/drivers/media/video/ivtv/ivtv-driver.c +++ b/linux/drivers/media/video/ivtv/ivtv-driver.c @@ -455,7 +455,7 @@ static void ivtv_process_eeprom(struct ivtv *itv) break; } if (tv.tuner_type == TUNER_ABSENT) - IVTV_ERR("tveeprom cannot autodetect tuner!"); + IVTV_ERR("tveeprom cannot autodetect tuner!\n"); if (itv->options.tuner == -1) itv->options.tuner = tv.tuner_type; diff --git a/linux/drivers/media/video/ivtv/ivtv-i2c.c b/linux/drivers/media/video/ivtv/ivtv-i2c.c index 984c73b5e..484a323f1 100644 --- a/linux/drivers/media/video/ivtv/ivtv-i2c.c +++ b/linux/drivers/media/video/ivtv/ivtv-i2c.c @@ -592,9 +592,11 @@ static struct i2c_client ivtv_i2c_client_template = { .name = "ivtv internal", }; -/* init + register i2c algo-bit adapter */ +/* init + register i2c adapter + instantiate IR receiver */ int init_ivtv_i2c(struct ivtv *itv) { + int retval; + IVTV_DEBUG_I2C("i2c init\n"); /* Sanity checks for the I2C hardware arrays. They must be the @@ -634,9 +636,39 @@ int init_ivtv_i2c(struct ivtv *itv) ivtv_setsda(itv, 1); if (itv->options.newi2c > 0) - return i2c_add_adapter(&itv->i2c_adap); + retval = i2c_add_adapter(&itv->i2c_adap); else - return i2c_bit_add_bus(&itv->i2c_adap); + retval = i2c_bit_add_bus(&itv->i2c_adap); + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) + /* Instantiate the IR receiver device, if present */ + if (retval == 0) { + struct i2c_board_info info; + /* The external IR receiver is at i2c address 0x34 (0x35 for + reads). Future Hauppauge cards will have an internal + receiver at 0x30 (0x31 for reads). In theory, both can be + fitted, and Hauppauge suggest an external overrides an + internal. + + That's why we probe 0x1a (~0x34) first. CB + */ + const unsigned short addr_list[] = { + 0x1a, /* Hauppauge IR external */ + 0x18, /* Hauppauge IR internal */ + 0x71, /* Hauppauge IR (PVR150) */ + 0x64, /* Pixelview IR */ + 0x30, /* KNC ONE IR */ + 0x6b, /* Adaptec IR */ + I2C_CLIENT_END + }; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + i2c_new_probed_device(&itv->i2c_adap, &info, addr_list); + } +#endif + + return retval; } void exit_ivtv_i2c(struct ivtv *itv) diff --git a/linux/drivers/media/video/ivtv/ivtv-queue.c b/linux/drivers/media/video/ivtv/ivtv-queue.c index ff7b7dede..7fde36e6d 100644 --- a/linux/drivers/media/video/ivtv/ivtv-queue.c +++ b/linux/drivers/media/video/ivtv/ivtv-queue.c @@ -230,7 +230,8 @@ int ivtv_stream_alloc(struct ivtv_stream *s) return -ENOMEM; } if (ivtv_might_use_dma(s)) { - s->sg_handle = pci_map_single(itv->pdev, s->sg_dma, sizeof(struct ivtv_sg_element), s->dma); + s->sg_handle = pci_map_single(itv->pdev, s->sg_dma, + sizeof(struct ivtv_sg_element), PCI_DMA_TODEVICE); ivtv_stream_sync_for_cpu(s); } diff --git a/linux/drivers/media/video/mt9m001.c b/linux/drivers/media/video/mt9m001.c index 8d61ad30a..e609d68c4 100644 --- a/linux/drivers/media/video/mt9m001.c +++ b/linux/drivers/media/video/mt9m001.c @@ -280,15 +280,9 @@ static int mt9m001_try_fmt(struct soc_camera_device *icd, { struct v4l2_pix_format *pix = &f->fmt.pix; - if (pix->height < 32 + icd->y_skip_top) - pix->height = 32 + icd->y_skip_top; - if (pix->height > 1024 + icd->y_skip_top) - pix->height = 1024 + icd->y_skip_top; - if (pix->width < 48) - pix->width = 48; - if (pix->width > 1280) - pix->width = 1280; - pix->width &= ~0x01; /* has to be even, unsure why was ~3 */ + v4l_bound_align_image(&pix->width, 48, 1280, 1, + &pix->height, 32 + icd->y_skip_top, + 1024 + icd->y_skip_top, 0, 0); return 0; } diff --git a/linux/drivers/media/video/mt9t031.c b/linux/drivers/media/video/mt9t031.c index 381dd0fbe..a57051522 100644 --- a/linux/drivers/media/video/mt9t031.c +++ b/linux/drivers/media/video/mt9t031.c @@ -385,17 +385,9 @@ static int mt9t031_try_fmt(struct soc_camera_device *icd, { struct v4l2_pix_format *pix = &f->fmt.pix; - if (pix->height < MT9T031_MIN_HEIGHT) - pix->height = MT9T031_MIN_HEIGHT; - if (pix->height > MT9T031_MAX_HEIGHT) - pix->height = MT9T031_MAX_HEIGHT; - if (pix->width < MT9T031_MIN_WIDTH) - pix->width = MT9T031_MIN_WIDTH; - if (pix->width > MT9T031_MAX_WIDTH) - pix->width = MT9T031_MAX_WIDTH; - - pix->width &= ~0x01; /* has to be even */ - pix->height &= ~0x01; /* has to be even */ + v4l_bound_align_image( + &pix->width, MT9T031_MIN_WIDTH, MT9T031_MAX_WIDTH, 1, + &pix->height, MT9T031_MIN_HEIGHT, MT9T031_MAX_HEIGHT, 1, 0); return 0; } diff --git a/linux/drivers/media/video/mt9v022.c b/linux/drivers/media/video/mt9v022.c index 016bcdfcf..4841e6eea 100644 --- a/linux/drivers/media/video/mt9v022.c +++ b/linux/drivers/media/video/mt9v022.c @@ -364,15 +364,9 @@ static int mt9v022_try_fmt(struct soc_camera_device *icd, { struct v4l2_pix_format *pix = &f->fmt.pix; - if (pix->height < 32 + icd->y_skip_top) - pix->height = 32 + icd->y_skip_top; - if (pix->height > 480 + icd->y_skip_top) - pix->height = 480 + icd->y_skip_top; - if (pix->width < 48) - pix->width = 48; - if (pix->width > 752) - pix->width = 752; - pix->width &= ~0x03; /* ? */ + v4l_bound_align_image(&pix->width, 48, 752, 2 /* ? */, + &pix->height, 32 + icd->y_skip_top, + 480 + icd->y_skip_top, 0, 0); return 0; } diff --git a/linux/drivers/media/video/mx3_camera.c b/linux/drivers/media/video/mx3_camera.c index 4d47eeb14..e605c076e 100644 --- a/linux/drivers/media/video/mx3_camera.c +++ b/linux/drivers/media/video/mx3_camera.c @@ -1074,7 +1074,7 @@ static struct soc_camera_host_ops mx3_soc_camera_host_ops = { .set_bus_param = mx3_camera_set_bus_param, }; -static int mx3_camera_probe(struct platform_device *pdev) +static int __devinit mx3_camera_probe(struct platform_device *pdev) { struct mx3_camera_dev *mx3_cam; struct resource *res; @@ -1194,11 +1194,11 @@ static struct platform_driver mx3_camera_driver = { .name = MX3_CAM_DRV_NAME, }, .probe = mx3_camera_probe, - .remove = __exit_p(mx3_camera_remove), + .remove = __devexit_p(mx3_camera_remove), }; -static int __devinit mx3_camera_init(void) +static int __init mx3_camera_init(void) { return platform_driver_register(&mx3_camera_driver); } diff --git a/linux/drivers/media/video/ov511.c b/linux/drivers/media/video/ov511.c index 12d109eaa..346eed722 100644 --- a/linux/drivers/media/video/ov511.c +++ b/linux/drivers/media/video/ov511.c @@ -112,6 +112,8 @@ static int framedrop = -1; static int fastset; static int force_palette; static int backlight; +/* Bitmask marking allocated devices from 0 to OV511_MAX_UNIT_VIDEO */ +static unsigned long ov511_devused; static int unit_video[OV511_MAX_UNIT_VIDEO]; static int remove_zeros; static int mirror; @@ -209,8 +211,6 @@ static const int i2c_detect_tries = 5; static struct usb_device_id device_table [] = { { USB_DEVICE(VEND_OMNIVISION, PROD_OV511) }, { USB_DEVICE(VEND_OMNIVISION, PROD_OV511PLUS) }, - { USB_DEVICE(VEND_OMNIVISION, PROD_OV518) }, - { USB_DEVICE(VEND_OMNIVISION, PROD_OV518PLUS) }, { USB_DEVICE(VEND_MATTEL, PROD_ME2CAM) }, { } /* Terminating entry */ }; @@ -5724,7 +5724,7 @@ ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id) struct usb_device *dev = interface_to_usbdev(intf); struct usb_interface_descriptor *idesc; struct usb_ov511 *ov; - int i; + int i, rc, nr; PDEBUG(1, "probing for device..."); @@ -5849,33 +5849,41 @@ ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id) ov->vdev->parent = &intf->dev; video_set_drvdata(ov->vdev, ov); - for (i = 0; i < OV511_MAX_UNIT_VIDEO; i++) { - /* Minor 0 cannot be specified; assume user wants autodetect */ - if (unit_video[i] == 0) - break; + mutex_lock(&ov->lock); - if (video_register_device(ov->vdev, VFL_TYPE_GRABBER, - unit_video[i]) >= 0) { - break; - } - } + /* Check to see next free device and mark as used */ + nr = find_first_zero_bit(&ov511_devused, OV511_MAX_UNIT_VIDEO); + + /* Registers device */ + if (unit_video[nr] != 0) + rc = video_register_device(ov->vdev, VFL_TYPE_GRABBER, + unit_video[nr]); + else + rc = video_register_device(ov->vdev, VFL_TYPE_GRABBER, -1); - /* Use the next available one */ - if ((ov->vdev->minor == -1) && - video_register_device(ov->vdev, VFL_TYPE_GRABBER, -1) < 0) { + if (rc < 0) { err("video_register_device failed"); + mutex_unlock(&ov->lock); goto error; } + /* Mark device as used */ + ov511_devused |= 1 << nr; + ov->nr = nr; + dev_info(&intf->dev, "Device at %s registered to minor %d\n", ov->usb_path, ov->vdev->minor); usb_set_intfdata(intf, ov); if (ov_create_sysfs(ov->vdev)) { err("ov_create_sysfs failed"); + ov511_devused &= ~(1 << nr); + mutex_unlock(&ov->lock); goto error; } + mutex_lock(&ov->lock); + return 0; error: @@ -5910,10 +5918,16 @@ ov51x_disconnect(struct usb_interface *intf) PDEBUG(3, ""); + mutex_lock(&ov->lock); usb_set_intfdata (intf, NULL); - if (!ov) + if (!ov) { + mutex_unlock(&ov->lock); return; + } + + /* Free device number */ + ov511_devused &= ~(1 << ov->nr); if (ov->vdev) video_unregister_device(ov->vdev); @@ -5931,6 +5945,7 @@ ov51x_disconnect(struct usb_interface *intf) ov->streaming = 0; ov51x_unlink_isoc(ov); + mutex_unlock(&ov->lock); ov->dev = NULL; diff --git a/linux/drivers/media/video/ov511.h b/linux/drivers/media/video/ov511.h index c303ac5a8..c213d944e 100644 --- a/linux/drivers/media/video/ov511.h +++ b/linux/drivers/media/video/ov511.h @@ -495,6 +495,9 @@ struct usb_ov511 { int has_decoder; /* Device has a video decoder */ int pal; /* Device is designed for PAL resolution */ + /* ov511 device number ID */ + int nr; /* Stores a device number */ + /* I2C interface */ struct mutex i2c_lock; /* Protect I2C controller regs */ unsigned char primary_i2c_slave; /* I2C write id of sensor */ diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index 28463489a..24644fc96 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -43,7 +43,7 @@ static int ir_mode[PVR_NUM] = { [0 ... PVR_NUM-1] = 1 }; module_param_array(ir_mode, int, NULL, 0444); MODULE_PARM_DESC(ir_mode,"specify: 0=disable IR reception, 1=normal IR"); -static int pvr2_disable_ir_video = 1; +static int pvr2_disable_ir_video; module_param_named(disable_autoload_ir_video, pvr2_disable_ir_video, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(disable_autoload_ir_video, @@ -651,6 +651,7 @@ static void do_i2c_scan(struct pvr2_hdw *hdw) static void pvr2_i2c_register_ir(struct pvr2_hdw *hdw) { +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) struct i2c_board_info info; unsigned char addr = 0; if (pvr2_disable_ir_video) { @@ -672,6 +673,7 @@ static void pvr2_i2c_register_ir(struct pvr2_hdw *hdw) strlcpy(info.type, "ir_video", I2C_NAME_SIZE); info.addr = addr; i2c_new_device(&hdw->i2c_adap, &info); +#endif } void pvr2_i2c_core_init(struct pvr2_hdw *hdw) diff --git a/linux/drivers/media/video/pwc/pwc-if.c b/linux/drivers/media/video/pwc/pwc-if.c index b3765e280..4087612ee 100644 --- a/linux/drivers/media/video/pwc/pwc-if.c +++ b/linux/drivers/media/video/pwc/pwc-if.c @@ -605,7 +605,7 @@ static void pwc_snapshot_button(struct pwc_device *pdev, int down) #ifdef CONFIG_USB_PWC_INPUT_EVDEV if (pdev->button_dev) { - input_report_key(pdev->button_dev, BTN_0, down); + input_report_key(pdev->button_dev, KEY_CAMERA, down); input_sync(pdev->button_dev); } #endif @@ -1791,7 +1791,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id return -ENOMEM; } memcpy(pdev->vdev, &pwc_template, sizeof(pwc_template)); - pdev->vdev->parent = &(udev->dev); + pdev->vdev->parent = &intf->dev; strcpy(pdev->vdev->name, name); video_set_drvdata(pdev->vdev, pdev); @@ -1859,7 +1859,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id pdev->button_dev->cdev.dev = &pdev->udev->dev; #endif pdev->button_dev->evbit[0] = BIT_MASK(EV_KEY); - pdev->button_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0); + pdev->button_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA); rc = input_register_device(pdev->button_dev); if (rc) { diff --git a/linux/drivers/media/video/pxa_camera.c b/linux/drivers/media/video/pxa_camera.c index 35642c430..8964d60cd 100644 --- a/linux/drivers/media/video/pxa_camera.c +++ b/linux/drivers/media/video/pxa_camera.c @@ -175,13 +175,6 @@ CICR0_EOFM | CICR0_FOM) /* - * YUV422P picture size should be a multiple of 16, so the heuristic aligns - * height, width on 4 byte boundaries to reach the 16 multiple for the size. - */ -#define YUV422P_X_Y_ALIGN 4 -#define YUV422P_SIZE_ALIGN YUV422P_X_Y_ALIGN * YUV422P_X_Y_ALIGN - -/* * Structures */ enum pxa_camera_active_dma { @@ -1410,28 +1403,15 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd, return -EINVAL; } - /* limit to pxa hardware capabilities */ - if (pix->height < 32) - pix->height = 32; - if (pix->height > 2048) - pix->height = 2048; - if (pix->width < 48) - pix->width = 48; - if (pix->width > 2048) - pix->width = 2048; - pix->width &= ~0x01; - /* - * YUV422P planar format requires images size to be a 16 bytes - * multiple. If not, zeros will be inserted between Y and U planes, and - * U and V planes, and YUV422P standard would be violated. + * Limit to pxa hardware capabilities. YUV422P planar format requires + * images size to be a multiple of 16 bytes. If not, zeros will be + * inserted between Y and U planes, and U and V planes, which violates + * the YUV422P standard. */ - if (xlate->host_fmt->fourcc == V4L2_PIX_FMT_YUV422P) { - if (!IS_ALIGNED(pix->width * pix->height, YUV422P_SIZE_ALIGN)) - pix->height = ALIGN(pix->height, YUV422P_X_Y_ALIGN); - if (!IS_ALIGNED(pix->width * pix->height, YUV422P_SIZE_ALIGN)) - pix->width = ALIGN(pix->width, YUV422P_X_Y_ALIGN); - } + v4l_bound_align_image(&pix->width, 48, 2048, 1, + &pix->height, 32, 2048, 0, + xlate->host_fmt->fourcc == V4L2_PIX_FMT_YUV422P ? 4 : 0); pix->bytesperline = pix->width * DIV_ROUND_UP(xlate->host_fmt->depth, 8); @@ -1563,7 +1543,7 @@ static struct soc_camera_host_ops pxa_soc_camera_host_ops = { .set_bus_param = pxa_camera_set_bus_param, }; -static int pxa_camera_probe(struct platform_device *pdev) +static int __devinit pxa_camera_probe(struct platform_device *pdev) { struct pxa_camera_dev *pcdev; struct resource *res; @@ -1738,11 +1718,11 @@ static struct platform_driver pxa_camera_driver = { .name = PXA_CAM_DRV_NAME, }, .probe = pxa_camera_probe, - .remove = __exit_p(pxa_camera_remove), + .remove = __devexit_p(pxa_camera_remove), }; -static int __devinit pxa_camera_init(void) +static int __init pxa_camera_init(void) { return platform_driver_register(&pxa_camera_driver); } diff --git a/linux/drivers/media/video/s2255drv.c b/linux/drivers/media/video/s2255drv.c index 8a939387a..203f6e3ff 100644 --- a/linux/drivers/media/video/s2255drv.c +++ b/linux/drivers/media/video/s2255drv.c @@ -110,6 +110,8 @@ #define SCALE_4CIFS 1 /* 640x480(NTSC) or 704x576(PAL) */ #define SCALE_2CIFS 2 /* 640x240(NTSC) or 704x288(PAL) */ #define SCALE_1CIFS 3 /* 320x240(NTSC) or 352x288(PAL) */ +/* SCALE_4CIFSI is the 2 fields interpolated into one */ +#define SCALE_4CIFSI 4 /* 640x480(NTSC) or 704x576(PAL) high quality */ #define COLOR_YUVPL 1 /* YUV planar */ #define COLOR_YUVPK 2 /* YUV packed */ @@ -239,6 +241,8 @@ struct s2255_dev { struct s2255_mode mode[MAX_CHANNELS]; /* jpeg compression */ struct v4l2_jpegcompression jc[MAX_CHANNELS]; + /* capture parameters (for high quality mode full size) */ + struct v4l2_captureparm cap_parm[MAX_CHANNELS]; const struct s2255_fmt *cur_fmt[MAX_CHANNELS]; int cur_frame[MAX_CHANNELS]; int last_frame[MAX_CHANNELS]; @@ -1021,9 +1025,16 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, fh->type = f->type; norm = norm_minw(fh->dev->vdev[fh->channel]); if (fh->width > norm_minw(fh->dev->vdev[fh->channel])) { - if (fh->height > norm_minh(fh->dev->vdev[fh->channel])) - fh->mode.scale = SCALE_4CIFS; - else + if (fh->height > norm_minh(fh->dev->vdev[fh->channel])) { + if (fh->dev->cap_parm[fh->channel].capturemode & + V4L2_MODE_HIGHQUALITY) { + fh->mode.scale = SCALE_4CIFSI; + dprintk(2, "scale 4CIFSI\n"); + } else { + fh->mode.scale = SCALE_4CIFS; + dprintk(2, "scale 4CIFS\n"); + } + } else fh->mode.scale = SCALE_2CIFS; } else { @@ -1124,6 +1135,7 @@ static u32 get_transfer_size(struct s2255_mode *mode) if (mode->format == FORMAT_NTSC) { switch (mode->scale) { case SCALE_4CIFS: + case SCALE_4CIFSI: linesPerFrame = NUM_LINES_4CIFS_NTSC * 2; pixelsPerLine = LINE_SZ_4CIFS_NTSC; break; @@ -1141,6 +1153,7 @@ static u32 get_transfer_size(struct s2255_mode *mode) } else if (mode->format == FORMAT_PAL) { switch (mode->scale) { case SCALE_4CIFS: + case SCALE_4CIFSI: linesPerFrame = NUM_LINES_4CIFS_PAL * 2; pixelsPerLine = LINE_SZ_4CIFS_PAL; break; @@ -1496,6 +1509,33 @@ static int vidioc_s_jpegcomp(struct file *file, void *priv, dprintk(2, "setting jpeg quality %d\n", jc->quality); return 0; } + +static int vidioc_g_parm(struct file *file, void *priv, + struct v4l2_streamparm *sp) +{ + struct s2255_fh *fh = priv; + struct s2255_dev *dev = fh->dev; + if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + sp->parm.capture.capturemode = dev->cap_parm[fh->channel].capturemode; + dprintk(2, "getting parm %d\n", sp->parm.capture.capturemode); + return 0; +} + +static int vidioc_s_parm(struct file *file, void *priv, + struct v4l2_streamparm *sp) +{ + struct s2255_fh *fh = priv; + struct s2255_dev *dev = fh->dev; + + if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + dev->cap_parm[fh->channel].capturemode = sp->parm.capture.capturemode; + dprintk(2, "setting param capture mode %d\n", + sp->parm.capture.capturemode); + return 0; +} static int s2255_open(struct file *file) { int minor = video_devdata(file)->minor; @@ -1787,6 +1827,8 @@ static const struct v4l2_ioctl_ops s2255_ioctl_ops = { #endif .vidioc_s_jpegcomp = vidioc_s_jpegcomp, .vidioc_g_jpegcomp = vidioc_g_jpegcomp, + .vidioc_s_parm = vidioc_s_parm, + .vidioc_g_parm = vidioc_g_parm, }; static struct video_device template = { diff --git a/linux/drivers/media/video/saa7134/Kconfig b/linux/drivers/media/video/saa7134/Kconfig index 0ba68987b..5bcce092e 100644 --- a/linux/drivers/media/video/saa7134/Kconfig +++ b/linux/drivers/media/video/saa7134/Kconfig @@ -44,6 +44,7 @@ config VIDEO_SAA7134_DVB select DVB_LNBP21 if !DVB_FE_CUSTOMISE select DVB_ZL10353 if !DVB_FE_CUSTOMISE select DVB_LGDT3305 if !DVB_FE_CUSTOMISE + select DVB_TDA10048 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE ---help--- diff --git a/linux/drivers/media/video/saa7134/Makefile b/linux/drivers/media/video/saa7134/Makefile index 3dbaa19a6..604158a8c 100644 --- a/linux/drivers/media/video/saa7134/Makefile +++ b/linux/drivers/media/video/saa7134/Makefile @@ -3,8 +3,7 @@ saa7134-objs := saa7134-cards.o saa7134-core.o saa7134-i2c.o \ saa7134-ts.o saa7134-tvaudio.o saa7134-vbi.o \ saa7134-video.o saa7134-input.o -obj-$(CONFIG_VIDEO_SAA7134) += saa7134.o saa7134-empress.o \ - saa6752hs.o +obj-$(CONFIG_VIDEO_SAA7134) += saa6752hs.o saa7134.o saa7134-empress.o obj-$(CONFIG_VIDEO_SAA7134_ALSA) += saa7134-alsa.o diff --git a/linux/drivers/media/video/saa7134/saa7134-cards.c b/linux/drivers/media/video/saa7134/saa7134-cards.c index a4e3deac2..e2d98ff5c 100644 --- a/linux/drivers/media/video/saa7134/saa7134-cards.c +++ b/linux/drivers/media/video/saa7134/saa7134-cards.c @@ -3403,13 +3403,15 @@ struct saa7134_board saa7134_boards[] = { }, }, [SAA7134_BOARD_HAUPPAUGE_HVR1110R3] = { - .name = "Hauppauge WinTV-HVR1110r3", + .name = "Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_TDA8290, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .tuner_config = 3, + .mpeg = SAA7134_MPEG_DVB, + .ts_type = SAA7134_MPEG_TS_SERIAL, .gpiomask = 0x0800100, /* GPIO 21 is an INPUT */ .inputs = {{ .name = name_tv, @@ -4495,6 +4497,7 @@ struct saa7134_board saa7134_boards[] = { /* Igor Kuznetsov <igk@igk.ru> */ /* Andrey Melnikoff <temnota@kmv.ru> */ /* Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> */ + /* Alexey Osipov <lion-simba@pridelands.ru> */ .name = "Beholder BeholdTV M6", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, @@ -4569,6 +4572,7 @@ struct saa7134_board saa7134_boards[] = { /* Igor Kuznetsov <igk@igk.ru> */ /* Andrey Melnikoff <temnota@kmv.ru> */ /* Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> */ + /* Alexey Osipov <lion-simba@pridelands.ru> */ .name = "Beholder BeholdTV M6 Extra", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* FIXME to MK5 */ @@ -6237,6 +6241,12 @@ struct pci_device_id saa7134_pci_tbl[] = { }, { .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, /* Avermedia Technologies Inc */ + .subdevice = 0xf736, + .driver_data = SAA7134_BOARD_AVERMEDIA_M103, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x1043, .subdevice = 0x4878, /* REV:1.02G */ .driver_data = SAA7134_BOARD_ASUSTeK_TIGER_3IN1, diff --git a/linux/drivers/media/video/saa7134/saa7134-core.c b/linux/drivers/media/video/saa7134/saa7134-core.c index 69a214417..da73430ad 100644 --- a/linux/drivers/media/video/saa7134/saa7134-core.c +++ b/linux/drivers/media/video/saa7134/saa7134-core.c @@ -380,6 +380,10 @@ void saa7134_buffer_next(struct saa7134_dev *dev, dprintk("buffer_next %p\n",NULL); saa7134_set_dmabits(dev); del_timer(&q->timeout); + + if (card_has_mpeg(dev)) + if (dev->ts_started) + saa7134_ts_stop(dev); } } @@ -465,6 +469,19 @@ int saa7134_set_dmabits(struct saa7134_dev *dev) ctrl |= SAA7134_MAIN_CTRL_TE5; irq |= SAA7134_IRQ1_INTE_RA2_1 | SAA7134_IRQ1_INTE_RA2_0; + + /* dma: setup channel 5 (= TS) */ + + saa_writeb(SAA7134_TS_DMA0, (dev->ts.nr_packets - 1) & 0xff); + saa_writeb(SAA7134_TS_DMA1, + ((dev->ts.nr_packets - 1) >> 8) & 0xff); + /* TSNOPIT=0, TSCOLAP=0 */ + saa_writeb(SAA7134_TS_DMA2, + (((dev->ts.nr_packets - 1) >> 16) & 0x3f) | 0x00); + saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE); + saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_16 | + SAA7134_RS_CONTROL_ME | + (dev->ts.pt_ts.dma >> 12)); } /* set task conditions + field handling */ @@ -836,7 +853,6 @@ static struct video_device *vdev_init(struct saa7134_dev *dev, if (NULL == vfd) return NULL; *vfd = *template; - vfd->minor = -1; vfd->v4l2_dev = &dev->v4l2_dev; vfd->release = video_device_release; vfd->debug = video_debug; diff --git a/linux/drivers/media/video/saa7134/saa7134-dvb.c b/linux/drivers/media/video/saa7134/saa7134-dvb.c index 2e1344ecf..360fbdf19 100644 --- a/linux/drivers/media/video/saa7134/saa7134-dvb.c +++ b/linux/drivers/media/video/saa7134/saa7134-dvb.c @@ -48,6 +48,7 @@ #include "isl6405.h" #include "lnbp21.h" #include "tuner-simple.h" +#include "tda10048.h" #include "tda18271.h" #include "lgdt3305.h" #include "tda8290.h" @@ -978,6 +979,18 @@ static struct lgdt3305_config hcw_lgdt3305_config = { .vsb_if_khz = 3250, }; +static struct tda10048_config hcw_tda10048_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_SERIAL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3500, + .dtv8_if_freq_khz = TDA10048_IF_4000, + .clk_freq_khz = TDA10048_CLK_16000, + .disable_gate_access = 1, +}; + static struct tda18271_std_map hauppauge_tda18271_std_map = { .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4, .if_lvl = 1, .rfagc_top = 0x58, }, @@ -1106,6 +1119,19 @@ static int dvb_init(struct saa7134_dev *dev) &tda827x_cfg_2) < 0) goto dettach_frontend; break; + case SAA7134_BOARD_HAUPPAUGE_HVR1110R3: + fe0->dvb.frontend = dvb_attach(tda10048_attach, + &hcw_tda10048_config, + &dev->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x4b, + &tda829x_no_probe); + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_adap, + &hcw_tda18271_config); + } + break; case SAA7134_BOARD_PHILIPS_TIGER: if (configure_tda827x_fe(dev, &philips_tiger_config, &tda827x_cfg_0) < 0) diff --git a/linux/drivers/media/video/saa7134/saa7134-empress.c b/linux/drivers/media/video/saa7134/saa7134-empress.c index dd22a5215..96334a20b 100644 --- a/linux/drivers/media/video/saa7134/saa7134-empress.c +++ b/linux/drivers/media/video/saa7134/saa7134-empress.c @@ -255,6 +255,16 @@ static int empress_s_fmt_vid_cap(struct file *file, void *priv, return 0; } +static int empress_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7134_dev *dev = file->private_data; + + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.sizeimage = TS_PACKET_SIZE * dev->ts.nr_packets; + + return 0; +} static int empress_reqbufs(struct file *file, void *priv, struct v4l2_requestbuffers *p) @@ -450,6 +460,7 @@ static const struct v4l2_file_operations ts_fops = static const struct v4l2_ioctl_ops ts_ioctl_ops = { .vidioc_querycap = empress_querycap, .vidioc_enum_fmt_vid_cap = empress_enum_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = empress_try_fmt_vid_cap, .vidioc_s_fmt_vid_cap = empress_s_fmt_vid_cap, .vidioc_g_fmt_vid_cap = empress_g_fmt_vid_cap, .vidioc_reqbufs = empress_reqbufs, diff --git a/linux/drivers/media/video/saa7134/saa7134-i2c.c b/linux/drivers/media/video/saa7134/saa7134-i2c.c index 3eb60aabe..f6cf7c1be 100644 --- a/linux/drivers/media/video/saa7134/saa7134-i2c.c +++ b/linux/drivers/media/video/saa7134/saa7134-i2c.c @@ -264,7 +264,7 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap, /* workaround for a saa7134 i2c bug * needed to talk to the mt352 demux * thanks to pinnacle for the hint */ - int quirk = 0xfd; + int quirk = 0xfe; d1printk(" [%02x quirk]",quirk); i2c_send_byte(dev,START,quirk); i2c_recv_byte(dev); @@ -326,33 +326,6 @@ static u32 functionality(struct i2c_adapter *adap) return I2C_FUNC_SMBUS_EMUL; } -static int attach_inform(struct i2c_client *client) -{ - struct saa7134_dev *dev = client->adapter->algo_data; - - d1printk( "%s i2c attach [addr=0x%x,client=%s]\n", - client->driver->driver.name, client->addr, client->name); - - /* Am I an i2c remote control? */ - - switch (client->addr) { - case 0x7a: - case 0x47: - case 0x71: - case 0x2d: - case 0x30: - { - struct IR_i2c *ir = i2c_get_clientdata(client); - d1printk("%s i2c IR detected (%s).\n", - client->driver->driver.name, ir->phys); - saa7134_set_i2c_ir(dev,ir); - break; - } - } - - return 0; -} - static struct i2c_algorithm saa7134_algo = { .master_xfer = saa7134_i2c_xfer, .functionality = functionality, @@ -369,7 +342,6 @@ static struct i2c_adapter saa7134_adap_template = { .name = "saa7134", .id = I2C_HW_SAA7134, .algo = &saa7134_algo, - .client_register = attach_inform, }; static struct i2c_client saa7134_client_template = { @@ -444,6 +416,11 @@ int saa7134_i2c_register(struct saa7134_dev *dev) saa7134_i2c_eeprom(dev,dev->eedata,sizeof(dev->eedata)); if (i2c_scan) do_i2c_scan(dev->name,&dev->i2c_client); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) + + /* Instantiate the IR receiver device, if present */ + saa7134_probe_i2c_ir(dev); +#endif return 0; } diff --git a/linux/drivers/media/video/saa7134/saa7134-input.c b/linux/drivers/media/video/saa7134/saa7134-input.c index 80a4cc23d..b54bfd645 100644 --- a/linux/drivers/media/video/saa7134/saa7134-input.c +++ b/linux/drivers/media/video/saa7134/saa7134-input.c @@ -59,8 +59,13 @@ MODULE_PARM_DESC(disable_other_ir, "disable full codes of " #define dprintk(fmt, arg...) if (ir_debug) \ printk(KERN_DEBUG "%s/ir: " fmt, dev->name , ## arg) +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) #define i2cdprintk(fmt, arg...) if (ir_debug) \ printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg) +#else +#define i2cdprintk(fmt, arg...) if (ir_debug) \ + printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg) +#endif /* Helper functions for RC5 and NEC decoding at GPIO16 or GPIO18 */ static int saa7134_rc5_irq(struct saa7134_dev *dev); @@ -134,10 +139,18 @@ static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key, int gpio; /* <dev> is needed to access GPIO. Used by the saa_readl macro. */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) struct saa7134_dev *dev = ir->c.adapter->algo_data; +#else + struct saa7134_dev *dev = ir->c->adapter->algo_data; +#endif if (dev == NULL) { dprintk("get_key_msi_tvanywhere_plus: " +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) "gir->c.adapter->algo_data is NULL!\n"); +#else + "gir->c->adapter->algo_data is NULL!\n"); +#endif return -EIO; } @@ -156,7 +169,11 @@ static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key, /* GPIO says there is a button press. Get it. */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) if (1 != i2c_master_recv(&ir->c, &b, 1)) { +#else + if (1 != i2c_master_recv(ir->c, &b, 1)) { +#endif i2cdprintk("read error\n"); return -EIO; } @@ -179,7 +196,11 @@ static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char b; /* poll IR chip */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) if (1 != i2c_master_recv(&ir->c,&b,1)) { +#else + if (1 != i2c_master_recv(ir->c, &b, 1)) { +#endif i2cdprintk("read error\n"); return -EIO; } @@ -202,7 +223,11 @@ static int get_key_hvr1110(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char buf[5], cod4, code3, code4; /* poll IR chip */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) if (5 != i2c_master_recv(&ir->c,buf,5)) +#else + if (5 != i2c_master_recv(ir->c, buf, 5)) +#endif return -EIO; cod4 = buf[4]; @@ -224,7 +249,11 @@ static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) unsigned char data[12]; u32 gpio; +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) struct saa7134_dev *dev = ir->c.adapter->algo_data; +#else + struct saa7134_dev *dev = ir->c->adapter->algo_data; +#endif /* rising SAA7134_GPIO_GPRESCAN reads the status */ saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); @@ -235,9 +264,17 @@ static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) if (0x400000 & ~gpio) return 0; /* No button press */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) ir->c.addr = 0x5a >> 1; +#else + ir->c->addr = 0x5a >> 1; +#endif +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) if (12 != i2c_master_recv(&ir->c, data, 12)) { +#else + if (12 != i2c_master_recv(ir->c, data, 12)) { +#endif i2cdprintk("read error\n"); return -EIO; } @@ -267,7 +304,11 @@ static int get_key_pinnacle(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw, unsigned int start = 0,parity = 0,code = 0; /* poll IR chip */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) if (4 != i2c_master_recv(&ir->c, b, 4)) { +#else + if (4 != i2c_master_recv(ir->c, b, 4)) { +#endif i2cdprintk("read error\n"); return -EIO; } @@ -686,40 +727,113 @@ void saa7134_input_fini(struct saa7134_dev *dev) dev->remote = NULL; } +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir) +#else +void saa7134_probe_i2c_ir(struct saa7134_dev *dev) +#endif { +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) + struct i2c_board_info info; + struct IR_i2c_init_data init_data; + const unsigned short addr_list[] = { + 0x7a, 0x47, 0x71, 0x2d, + I2C_CLIENT_END + }; + + struct i2c_msg msg_msi = { + .addr = 0x50, + .flags = I2C_M_RD, + .len = 0, + .buf = NULL, + }; + + int rc; + +#endif if (disable_ir) { +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) dprintk("Found supported i2c remote, but IR has been disabled\n"); ir->get_key=NULL; +#else + dprintk("IR has been disabled, not probing for i2c remote\n"); +#endif return; } +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) + memset(&info, 0, sizeof(struct i2c_board_info)); + memset(&init_data, 0, sizeof(struct IR_i2c_init_data)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + +#endif switch (dev->board) { case SAA7134_BOARD_PINNACLE_PCTV_110i: case SAA7134_BOARD_PINNACLE_PCTV_310i: +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) snprintf(ir->c.name, sizeof(ir->c.name), "Pinnacle PCTV"); +#else + init_data.name = "Pinnacle PCTV"; +#endif if (pinnacle_remote == 0) { +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) ir->get_key = get_key_pinnacle_color; ir->ir_codes = ir_codes_pinnacle_color; +#else + init_data.get_key = get_key_pinnacle_color; + init_data.ir_codes = ir_codes_pinnacle_color; +#endif } else { +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) ir->get_key = get_key_pinnacle_grey; ir->ir_codes = ir_codes_pinnacle_grey; +#else + init_data.get_key = get_key_pinnacle_grey; + init_data.ir_codes = ir_codes_pinnacle_grey; +#endif } break; case SAA7134_BOARD_UPMOST_PURPLE_TV: +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) snprintf(ir->c.name, sizeof(ir->c.name), "Purple TV"); ir->get_key = get_key_purpletv; ir->ir_codes = ir_codes_purpletv; +#else + init_data.name = "Purple TV"; + init_data.get_key = get_key_purpletv; + init_data.ir_codes = ir_codes_purpletv; +#endif break; case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS: +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) snprintf(ir->c.name, sizeof(ir->c.name), "MSI TV@nywhere Plus"); ir->get_key = get_key_msi_tvanywhere_plus; ir->ir_codes = ir_codes_msi_tvanywhere_plus; +#else + init_data.name = "MSI TV@nywhere Plus"; + init_data.get_key = get_key_msi_tvanywhere_plus; + init_data.ir_codes = ir_codes_msi_tvanywhere_plus; + info.addr = 0x30; + /* MSI TV@nywhere Plus controller doesn't seem to + respond to probes unless we read something from + an existing device. Weird... + REVISIT: might no longer be needed */ + rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1); + dprintk(KERN_DEBUG "probe 0x%02x @ %s: %s\n", + msg_msi.addr, dev->i2c_adap.name, + (1 == rc) ? "yes" : "no"); +#endif break; case SAA7134_BOARD_HAUPPAUGE_HVR1110: +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) snprintf(ir->c.name, sizeof(ir->c.name), "HVR 1110"); ir->get_key = get_key_hvr1110; ir->ir_codes = ir_codes_hauppauge_new; +#else + init_data.name = "HVR 1110"; + init_data.get_key = get_key_hvr1110; + init_data.ir_codes = ir_codes_hauppauge_new; +#endif break; case SAA7134_BOARD_BEHOLD_607FM_MK3: case SAA7134_BOARD_BEHOLD_607FM_MK5: @@ -733,15 +847,39 @@ void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir) case SAA7134_BOARD_BEHOLD_M63: case SAA7134_BOARD_BEHOLD_M6_EXTRA: case SAA7134_BOARD_BEHOLD_H6: +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) snprintf(ir->c.name, sizeof(ir->c.name), "BeholdTV"); ir->get_key = get_key_beholdm6xx; ir->ir_codes = ir_codes_behold; +#else + init_data.name = "BeholdTV"; + init_data.get_key = get_key_beholdm6xx; + init_data.ir_codes = ir_codes_behold; +#endif break; +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) default: dprintk("Shouldn't get here: Unknown board %x for I2C IR?\n",dev->board); +#else + case SAA7134_BOARD_AVERMEDIA_CARDBUS_501: + case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: + info.addr = 0x40; +#endif break; } +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 30) + if (init_data.name) + info.platform_data = &init_data; + /* No need to probe if address is known */ + if (info.addr) { + i2c_new_device(&dev->i2c_adap, &info); + return; + } + + /* Address not known, fallback to probing */ + i2c_new_probed_device(&dev->i2c_adap, &info, addr_list); +#endif } static int saa7134_rc5_irq(struct saa7134_dev *dev) diff --git a/linux/drivers/media/video/saa7134/saa7134-ts.c b/linux/drivers/media/video/saa7134/saa7134-ts.c index b8ff459d0..3fa652279 100644 --- a/linux/drivers/media/video/saa7134/saa7134-ts.c +++ b/linux/drivers/media/video/saa7134/saa7134-ts.c @@ -67,33 +67,8 @@ static int buffer_activate(struct saa7134_dev *dev, mod_timer(&dev->ts_q.timeout, jiffies+TS_BUFFER_TIMEOUT); - if (dev->ts_state == SAA7134_TS_BUFF_DONE) { - /* Clear TS cache */ - dev->buff_cnt = 0; - saa_writeb(SAA7134_TS_SERIAL1, 0x00); - saa_writeb(SAA7134_TS_SERIAL1, 0x03); - saa_writeb(SAA7134_TS_SERIAL1, 0x00); - saa_writeb(SAA7134_TS_SERIAL1, 0x01); - - /* TS clock non-inverted */ - saa_writeb(SAA7134_TS_SERIAL1, 0x00); - - /* Start TS stream */ - switch (saa7134_boards[dev->board].ts_type) { - case SAA7134_MPEG_TS_PARALLEL: - saa_writeb(SAA7134_TS_SERIAL0, 0x40); - saa_writeb(SAA7134_TS_PARALLEL, 0xec); - break; - case SAA7134_MPEG_TS_SERIAL: - saa_writeb(SAA7134_TS_SERIAL0, 0xd8); - saa_writeb(SAA7134_TS_PARALLEL, 0x6c); - saa_writeb(SAA7134_TS_PARALLEL_SERIAL, 0xbc); - saa_writeb(SAA7134_TS_SERIAL1, 0x02); - break; - } - - dev->ts_state = SAA7134_TS_STARTED; - } + if (!dev->ts_started) + saa7134_ts_start(dev); return 0; } @@ -104,7 +79,6 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, struct saa7134_dev *dev = q->priv_data; struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); unsigned int lines, llength, size; - u32 control; int err; dprintk("buffer_prepare [%p,%s]\n",buf,v4l2_field_names[field]); @@ -121,8 +95,11 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, } if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb); + dprintk("buffer_prepare: needs_init\n"); + buf->vb.width = llength; buf->vb.height = lines; buf->vb.size = size; @@ -139,23 +116,6 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, goto oops; } - dev->buff_cnt++; - - if (dev->buff_cnt == dev->ts.nr_bufs) { - dev->ts_state = SAA7134_TS_BUFF_DONE; - /* dma: setup channel 5 (= TS) */ - control = SAA7134_RS_CONTROL_BURST_16 | - SAA7134_RS_CONTROL_ME | - (buf->pt->dma >> 12); - - saa_writeb(SAA7134_TS_DMA0, (lines - 1) & 0xff); - saa_writeb(SAA7134_TS_DMA1, ((lines - 1) >> 8) & 0xff); - /* TSNOPIT=0, TSCOLAP=0 */ - saa_writeb(SAA7134_TS_DMA2, (((lines - 1) >> 16) & 0x3f) | 0x00); - saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE); - saa_writel(SAA7134_RS_CONTROL(5), control); - } - buf->vb.state = VIDEOBUF_PREPARED; buf->activate = buffer_activate; buf->vb.field = field; @@ -175,8 +135,7 @@ buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) if (0 == *count) *count = dev->ts.nr_bufs; *count = saa7134_buffer_count(*size,*count); - dev->buff_cnt = 0; - dev->ts_state = SAA7134_TS_STOPPED; + return 0; } @@ -193,11 +152,9 @@ static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); struct saa7134_dev *dev = q->priv_data; - if (dev->ts_state == SAA7134_TS_STARTED) { - /* Stop TS transport */ - saa_writeb(SAA7134_TS_PARALLEL, 0x6c); - dev->ts_state = SAA7134_TS_STOPPED; - } + if (dev->ts_started) + saa7134_ts_stop(dev); + saa7134_dma_free(q,buf); } @@ -214,7 +171,7 @@ EXPORT_SYMBOL_GPL(saa7134_ts_qops); static unsigned int tsbufs = 8; module_param(tsbufs, int, 0444); -MODULE_PARM_DESC(tsbufs,"number of ts buffers, range 2-32"); +MODULE_PARM_DESC(tsbufs, "number of ts buffers for read/write IO, range 2-32"); static unsigned int ts_nr_packets = 64; module_param(ts_nr_packets, int, 0444); @@ -256,6 +213,7 @@ int saa7134_ts_init1(struct saa7134_dev *dev) dev->ts_q.timeout.data = (unsigned long)(&dev->ts_q); dev->ts_q.dev = dev; dev->ts_q.need_two = 1; + dev->ts_started = 0; saa7134_pgtable_alloc(dev->pci,&dev->ts.pt_ts); /* init TS hw */ @@ -264,13 +222,67 @@ int saa7134_ts_init1(struct saa7134_dev *dev) return 0; } +/* Function for stop TS */ +int saa7134_ts_stop(struct saa7134_dev *dev) +{ + dprintk("TS stop\n"); + + BUG_ON(!dev->ts_started); + + /* Stop TS stream */ + switch (saa7134_boards[dev->board].ts_type) { + case SAA7134_MPEG_TS_PARALLEL: + saa_writeb(SAA7134_TS_PARALLEL, 0x6c); + dev->ts_started = 0; + break; + case SAA7134_MPEG_TS_SERIAL: + saa_writeb(SAA7134_TS_SERIAL0, 0x40); + dev->ts_started = 0; + break; + } + return 0; +} + +/* Function for start TS */ +int saa7134_ts_start(struct saa7134_dev *dev) +{ + dprintk("TS start\n"); + + BUG_ON(dev->ts_started); + + saa_writeb(SAA7134_TS_SERIAL1, 0x00); + saa_writeb(SAA7134_TS_SERIAL1, 0x03); + saa_writeb(SAA7134_TS_SERIAL1, 0x00); + saa_writeb(SAA7134_TS_SERIAL1, 0x01); + + /* TS clock non-inverted */ + saa_writeb(SAA7134_TS_SERIAL1, 0x00); + + /* Start TS stream */ + switch (saa7134_boards[dev->board].ts_type) { + case SAA7134_MPEG_TS_PARALLEL: + saa_writeb(SAA7134_TS_SERIAL0, 0x40); + saa_writeb(SAA7134_TS_PARALLEL, 0xec); + break; + case SAA7134_MPEG_TS_SERIAL: + saa_writeb(SAA7134_TS_SERIAL0, 0xd8); + saa_writeb(SAA7134_TS_PARALLEL, 0x6c); + saa_writeb(SAA7134_TS_PARALLEL_SERIAL, 0xbc); + saa_writeb(SAA7134_TS_SERIAL1, 0x02); + break; + } + + dev->ts_started = 1; + + return 0; +} + int saa7134_ts_fini(struct saa7134_dev *dev) { saa7134_pgtable_free(dev->pci,&dev->ts.pt_ts); return 0; } - void saa7134_irq_ts_done(struct saa7134_dev *dev, unsigned long status) { enum v4l2_field field; diff --git a/linux/drivers/media/video/saa7134/saa7134-video.c b/linux/drivers/media/video/saa7134/saa7134-video.c index 5f68bed54..4212c4ec8 100644 --- a/linux/drivers/media/video/saa7134/saa7134-video.c +++ b/linux/drivers/media/video/saa7134/saa7134-video.c @@ -1057,6 +1057,7 @@ static int buffer_prepare(struct videobuf_queue *q, buf->vb.field = field; buf->fmt = fh->fmt; buf->pt = &fh->pt_cap; + dev->video_q.curr = NULL; err = videobuf_iolock(q,&buf->vb,&dev->ovbuf); if (err) @@ -1423,11 +1424,13 @@ video_poll(struct file *file, struct poll_table_struct *wait) { struct saa7134_fh *fh = file->private_data; struct videobuf_buffer *buf = NULL; + unsigned int rc = 0; if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) return videobuf_poll_stream(file, &fh->vbi, wait); if (res_check(fh,RESOURCE_VIDEO)) { + mutex_lock(&fh->cap.vb_lock); if (!list_empty(&fh->cap.stream)) buf = list_entry(fh->cap.stream.next, struct videobuf_buffer, stream); } else { @@ -1446,13 +1449,14 @@ video_poll(struct file *file, struct poll_table_struct *wait) } if (!buf) - return POLLERR; + goto err; poll_wait(file, &buf->done, wait); if (buf->state == VIDEOBUF_DONE || buf->state == VIDEOBUF_ERROR) - return POLLIN|POLLRDNORM; - return 0; + rc = POLLIN|POLLRDNORM; + mutex_unlock(&fh->cap.vb_lock); + return rc; err: mutex_unlock(&fh->cap.vb_lock); @@ -1643,15 +1647,8 @@ static int saa7134_try_fmt_vid_cap(struct file *file, void *priv, } f->fmt.pix.field = field; - if (f->fmt.pix.width < 48) - f->fmt.pix.width = 48; - if (f->fmt.pix.height < 32) - f->fmt.pix.height = 32; - if (f->fmt.pix.width > maxw) - f->fmt.pix.width = maxw; - if (f->fmt.pix.height > maxh) - f->fmt.pix.height = maxh; - f->fmt.pix.width &= ~0x03; + v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2, + &f->fmt.pix.height, 32, maxh, 0, 0); f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3; f->fmt.pix.sizeimage = diff --git a/linux/drivers/media/video/saa7134/saa7134.h b/linux/drivers/media/video/saa7134/saa7134.h index ae7ba8923..454802e73 100644 --- a/linux/drivers/media/video/saa7134/saa7134.h +++ b/linux/drivers/media/video/saa7134/saa7134.h @@ -498,12 +498,6 @@ struct saa7134_mpeg_ops { void (*signal_change)(struct saa7134_dev *dev); }; -enum saa7134_ts_status { - SAA7134_TS_STOPPED, - SAA7134_TS_BUFF_DONE, - SAA7134_TS_STARTED, -}; - /* global device status */ struct saa7134_dev { struct list_head devlist; @@ -598,8 +592,7 @@ struct saa7134_dev { /* SAA7134_MPEG_* */ struct saa7134_ts ts; struct saa7134_dmaqueue ts_q; - enum saa7134_ts_status ts_state; - unsigned int buff_cnt; + int ts_started; struct saa7134_mpeg_ops *mops; /* SAA7134_MPEG_EMPRESS only */ @@ -757,6 +750,9 @@ void saa7134_ts_unregister(struct saa7134_mpeg_ops *ops); int saa7134_ts_init_hw(struct saa7134_dev *dev); +int saa7134_ts_start(struct saa7134_dev *dev); +int saa7134_ts_stop(struct saa7134_dev *dev); + /* ----------------------------------------------------------- */ /* saa7134-vbi.c */ @@ -804,7 +800,11 @@ void saa7134_irq_oss_done(struct saa7134_dev *dev, unsigned long status); int saa7134_input_init1(struct saa7134_dev *dev); void saa7134_input_fini(struct saa7134_dev *dev); void saa7134_input_irq(struct saa7134_dev *dev); +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30) void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir); +#else +void saa7134_probe_i2c_ir(struct saa7134_dev *dev); +#endif void saa7134_ir_start(struct saa7134_dev *dev, struct card_ir *ir); void saa7134_ir_stop(struct saa7134_dev *dev); diff --git a/linux/drivers/media/video/se401.c b/linux/drivers/media/video/se401.c index cca1cb0c4..1274a5966 100644 --- a/linux/drivers/media/video/se401.c +++ b/linux/drivers/media/video/se401.c @@ -38,7 +38,7 @@ static const char version[] = "0.24"; static int flickerless; static int video_nr = -1; -static struct usb_device_id device_table [] = { +static struct usb_device_id device_table[] = { { USB_DEVICE(0x03e8, 0x0004) },/* Endpoints/Aox SE401 */ { USB_DEVICE(0x0471, 0x030b) },/* Philips PCVC665K */ { USB_DEVICE(0x047d, 0x5001) },/* Kensington 67014 */ @@ -53,7 +53,8 @@ MODULE_AUTHOR("Jeroen Vreeken <pe1rxq@amsat.org>"); MODULE_DESCRIPTION("SE401 USB Camera Driver"); MODULE_LICENSE("GPL"); module_param(flickerless, int, 0); -MODULE_PARM_DESC(flickerless, "Net frequency to adjust exposure time to (0/50/60)"); +MODULE_PARM_DESC(flickerless, + "Net frequency to adjust exposure time to (0/50/60)"); module_param(video_nr, int, 0); static struct usb_driver se401_driver; @@ -78,8 +79,8 @@ static void *rvmalloc(unsigned long size) adr = (unsigned long) mem; while (size > 0) { SetPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; + adr += PAGE_SIZE; + size -= PAGE_SIZE; } return mem; @@ -95,8 +96,8 @@ static void rvfree(void *mem, unsigned long size) adr = (unsigned long) mem; while ((long) size > 0) { ClearPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; + adr += PAGE_SIZE; + size -= PAGE_SIZE; } vfree(mem); } @@ -112,7 +113,7 @@ static void rvfree(void *mem, unsigned long size) static int se401_sndctrl(int set, struct usb_se401 *se401, unsigned short req, unsigned short value, unsigned char *cp, int size) { - return usb_control_msg ( + return usb_control_msg( se401->dev, set ? usb_sndctrlpipe(se401->dev, 0) : usb_rcvctrlpipe(se401->dev, 0), req, @@ -132,7 +133,7 @@ static int se401_set_feature(struct usb_se401 *se401, unsigned short selector, and the param in index, but in the logs of the windows driver they do this the other way around... */ - return usb_control_msg ( + return usb_control_msg( se401->dev, usb_sndctrlpipe(se401->dev, 0), SE401_REQ_SET_EXT_FEATURE, @@ -152,7 +153,7 @@ static unsigned short se401_get_feature(struct usb_se401 *se401, wrong here to.... */ unsigned char cp[2]; - usb_control_msg ( + usb_control_msg( se401->dev, usb_rcvctrlpipe(se401->dev, 0), SE401_REQ_GET_EXT_FEATURE, @@ -175,46 +176,51 @@ static unsigned short se401_get_feature(struct usb_se401 *se401, static int se401_send_pict(struct usb_se401 *se401) { - se401_set_feature(se401, HV7131_REG_TITL, se401->expose_l);/* integration time low */ - se401_set_feature(se401, HV7131_REG_TITM, se401->expose_m);/* integration time mid */ - se401_set_feature(se401, HV7131_REG_TITU, se401->expose_h);/* integration time mid */ - se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel);/* reset level value */ - se401_set_feature(se401, HV7131_REG_ARCG, se401->rgain);/* red color gain */ - se401_set_feature(se401, HV7131_REG_AGCG, se401->ggain);/* green color gain */ - se401_set_feature(se401, HV7131_REG_ABCG, se401->bgain);/* blue color gain */ + /* integration time low */ + se401_set_feature(se401, HV7131_REG_TITL, se401->expose_l); + /* integration time mid */ + se401_set_feature(se401, HV7131_REG_TITM, se401->expose_m); + /* integration time mid */ + se401_set_feature(se401, HV7131_REG_TITU, se401->expose_h); + /* reset level value */ + se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel); + /* red color gain */ + se401_set_feature(se401, HV7131_REG_ARCG, se401->rgain); + /* green color gain */ + se401_set_feature(se401, HV7131_REG_AGCG, se401->ggain); + /* blue color gain */ + se401_set_feature(se401, HV7131_REG_ABCG, se401->bgain); return 0; } static void se401_set_exposure(struct usb_se401 *se401, int brightness) { - int integration=brightness<<5; - - if (flickerless==50) { - integration=integration-integration%106667; - } - if (flickerless==60) { - integration=integration-integration%88889; - } - se401->brightness=integration>>5; - se401->expose_h=(integration>>16)&0xff; - se401->expose_m=(integration>>8)&0xff; - se401->expose_l=integration&0xff; + int integration = brightness << 5; + + if (flickerless == 50) + integration = integration-integration % 106667; + if (flickerless == 60) + integration = integration-integration % 88889; + se401->brightness = integration >> 5; + se401->expose_h = (integration >> 16) & 0xff; + se401->expose_m = (integration >> 8) & 0xff; + se401->expose_l = integration & 0xff; } static int se401_get_pict(struct usb_se401 *se401, struct video_picture *p) { - p->brightness=se401->brightness; - if (se401->enhance) { - p->whiteness=32768; - } else { - p->whiteness=0; - } - p->colour=65535; - p->contrast=65535; - p->hue=se401->rgain<<10; - p->palette=se401->palette; - p->depth=3; /* rgb24 */ + p->brightness = se401->brightness; + if (se401->enhance) + p->whiteness = 32768; + else + p->whiteness = 0; + + p->colour = 65535; + p->contrast = 65535; + p->hue = se401->rgain << 10; + p->palette = se401->palette; + p->depth = 3; /* rgb24 */ return 0; } @@ -223,20 +229,19 @@ static int se401_set_pict(struct usb_se401 *se401, struct video_picture *p) { if (p->palette != VIDEO_PALETTE_RGB24) return 1; - se401->palette=p->palette; - if (p->hue!=se401->hue) { - se401->rgain= p->hue>>10; - se401->bgain= 0x40-(p->hue>>10); - se401->hue=p->hue; + se401->palette = p->palette; + if (p->hue != se401->hue) { + se401->rgain = p->hue >> 10; + se401->bgain = 0x40-(p->hue >> 10); + se401->hue = p->hue; } - if (p->brightness!=se401->brightness) { + if (p->brightness != se401->brightness) se401_set_exposure(se401, p->brightness); - } - if (p->whiteness>=32768) { - se401->enhance=1; - } else { - se401->enhance=0; - } + + if (p->whiteness >= 32768) + se401->enhance = 1; + else + se401->enhance = 0; se401_send_pict(se401); se401_send_pict(se401); return 0; @@ -249,7 +254,7 @@ static int se401_set_pict(struct usb_se401 *se401, struct video_picture *p) static void se401_auto_resetlevel(struct usb_se401 *se401) { unsigned int ahrc, alrc; - int oldreset=se401->resetlevel; + int oldreset = se401->resetlevel; /* For some reason this normally read-only register doesn't get reset to zero after reading them just once... @@ -258,24 +263,24 @@ static void se401_auto_resetlevel(struct usb_se401 *se401) se401_get_feature(se401, HV7131_REG_HIREFNOL); se401_get_feature(se401, HV7131_REG_LOREFNOH); se401_get_feature(se401, HV7131_REG_LOREFNOL); - ahrc=256*se401_get_feature(se401, HV7131_REG_HIREFNOH) + + ahrc = 256*se401_get_feature(se401, HV7131_REG_HIREFNOH) + se401_get_feature(se401, HV7131_REG_HIREFNOL); - alrc=256*se401_get_feature(se401, HV7131_REG_LOREFNOH) + + alrc = 256*se401_get_feature(se401, HV7131_REG_LOREFNOH) + se401_get_feature(se401, HV7131_REG_LOREFNOL); /* Not an exact science, but it seems to work pretty well... */ if (alrc > 10) { - while (alrc>=10 && se401->resetlevel < 63) { + while (alrc >= 10 && se401->resetlevel < 63) { se401->resetlevel++; - alrc /=2; + alrc /= 2; } } else if (ahrc > 20) { - while (ahrc>=20 && se401->resetlevel > 0) { + while (ahrc >= 20 && se401->resetlevel > 0) { se401->resetlevel--; - ahrc /=2; + ahrc /= 2; } } - if (se401->resetlevel!=oldreset) + if (se401->resetlevel != oldreset) se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel); return; @@ -304,21 +309,22 @@ static void se401_button_irq(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, urb->status); + dbg("%s - urb shutting down with status: %d", + __func__, urb->status); return; default: - dbg("%s - nonzero urb status received: %d", __func__, urb->status); + dbg("%s - nonzero urb status received: %d", + __func__, urb->status); goto exit; } - if (urb->actual_length >=2) { + if (urb->actual_length >= 2) if (se401->button) - se401->buttonpressed=1; - } + se401->buttonpressed = 1; exit: - status = usb_submit_urb (urb, GFP_ATOMIC); + status = usb_submit_urb(urb, GFP_ATOMIC); if (status) - err ("%s - usb_submit_urb failed with result %d", + err("%s - usb_submit_urb failed with result %d", __func__, status); } @@ -344,55 +350,52 @@ static void se401_video_irq(struct urb *urb) keeps sending them forever... */ if (length && !urb->status) { - se401->nullpackets=0; - switch(se401->scratch[se401->scratch_next].state) { - case BUFFER_READY: - case BUFFER_BUSY: { - se401->dropped++; - break; - } - case BUFFER_UNUSED: { - memcpy(se401->scratch[se401->scratch_next].data, (unsigned char *)urb->transfer_buffer, length); - se401->scratch[se401->scratch_next].state=BUFFER_READY; - se401->scratch[se401->scratch_next].offset=se401->bayeroffset; - se401->scratch[se401->scratch_next].length=length; - if (waitqueue_active(&se401->wq)) { - wake_up_interruptible(&se401->wq); - } - se401->scratch_overflow=0; - se401->scratch_next++; - if (se401->scratch_next>=SE401_NUMSCRATCH) - se401->scratch_next=0; - break; - } - } - se401->bayeroffset+=length; - if (se401->bayeroffset>=se401->cheight*se401->cwidth) { - se401->bayeroffset=0; + se401->nullpackets = 0; + switch (se401->scratch[se401->scratch_next].state) { + case BUFFER_READY: + case BUFFER_BUSY: + se401->dropped++; + break; + case BUFFER_UNUSED: + memcpy(se401->scratch[se401->scratch_next].data, + (unsigned char *)urb->transfer_buffer, length); + se401->scratch[se401->scratch_next].state + = BUFFER_READY; + se401->scratch[se401->scratch_next].offset + = se401->bayeroffset; + se401->scratch[se401->scratch_next].length = length; + if (waitqueue_active(&se401->wq)) + wake_up_interruptible(&se401->wq); + se401->scratch_overflow = 0; + se401->scratch_next++; + if (se401->scratch_next >= SE401_NUMSCRATCH) + se401->scratch_next = 0; + break; } + se401->bayeroffset += length; + if (se401->bayeroffset >= se401->cheight * se401->cwidth) + se401->bayeroffset = 0; } else { se401->nullpackets++; - if (se401->nullpackets > SE401_MAX_NULLPACKETS) { - if (waitqueue_active(&se401->wq)) { + if (se401->nullpackets > SE401_MAX_NULLPACKETS) + if (waitqueue_active(&se401->wq)) wake_up_interruptible(&se401->wq); - } - } } /* Resubmit urb for new data */ - urb->status=0; - urb->dev=se401->dev; - if(usb_submit_urb(urb, GFP_KERNEL)) + urb->status = 0; + urb->dev = se401->dev; + if (usb_submit_urb(urb, GFP_KERNEL)) dev_info(&urb->dev->dev, "urb burned down\n"); return; } static void se401_send_size(struct usb_se401 *se401, int width, int height) { - int i=0; - int mode=0x03; /* No compression */ - int sendheight=height; - int sendwidth=width; + int i = 0; + int mode = 0x03; /* No compression */ + int sendheight = height; + int sendwidth = width; /* JangGu compression can only be used with the camera supported sizes, but bayer seems to work with any size that fits on the sensor. @@ -400,18 +403,21 @@ static void se401_send_size(struct usb_se401 *se401, int width, int height) 4 or 16 times subcapturing, if not we use uncompressed bayer data but this will result in cutouts of the maximum size.... */ - while (i<se401->sizes && !(se401->width[i]==width && se401->height[i]==height)) + while (i < se401->sizes && !(se401->width[i] == width && + se401->height[i] == height)) i++; - while (i<se401->sizes) { - if (se401->width[i]==width*2 && se401->height[i]==height*2) { - sendheight=se401->height[i]; - sendwidth=se401->width[i]; - mode=0x40; + while (i < se401->sizes) { + if (se401->width[i] == width * 2 && + se401->height[i] == height * 2) { + sendheight = se401->height[i]; + sendwidth = se401->width[i]; + mode = 0x40; } - if (se401->width[i]==width*4 && se401->height[i]==height*4) { - sendheight=se401->height[i]; - sendwidth=se401->width[i]; - mode=0x42; + if (se401->width[i] == width * 4 && + se401->height[i] == height * 4) { + sendheight = se401->height[i]; + sendwidth = se401->width[i]; + mode = 0x42; } i++; } @@ -420,13 +426,10 @@ static void se401_send_size(struct usb_se401 *se401, int width, int height) se401_sndctrl(1, se401, SE401_REQ_SET_HEIGHT, sendheight, NULL, 0); se401_set_feature(se401, SE401_OPERATINGMODE, mode); - if (mode==0x03) { - se401->format=FMT_BAYER; - } else { - se401->format=FMT_JANGGU; - } - - return; + if (mode == 0x03) + se401->format = FMT_BAYER; + else + se401->format = FMT_JANGGU; } /* @@ -437,29 +440,31 @@ static void se401_send_size(struct usb_se401 *se401, int width, int height) static int se401_start_stream(struct usb_se401 *se401) { struct urb *urb; - int err=0, i; - se401->streaming=1; + int err = 0, i; + se401->streaming = 1; se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0); se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0); /* Set picture settings */ - se401_set_feature(se401, HV7131_REG_MODE_B, 0x05);/*windowed + pix intg */ + /* windowed + pix intg */ + se401_set_feature(se401, HV7131_REG_MODE_B, 0x05); se401_send_pict(se401); se401_send_size(se401, se401->cwidth, se401->cheight); - se401_sndctrl(1, se401, SE401_REQ_START_CONTINUOUS_CAPTURE, 0, NULL, 0); + se401_sndctrl(1, se401, SE401_REQ_START_CONTINUOUS_CAPTURE, + 0, NULL, 0); /* Do some memory allocation */ - for (i=0; i<SE401_NUMFRAMES; i++) { - se401->frame[i].data=se401->fbuf + i * se401->maxframesize; - se401->frame[i].curpix=0; + for (i = 0; i < SE401_NUMFRAMES; i++) { + se401->frame[i].data = se401->fbuf + i * se401->maxframesize; + se401->frame[i].curpix = 0; } - for (i=0; i<SE401_NUMSBUF; i++) { - se401->sbuf[i].data=kmalloc(SE401_PACKETSIZE, GFP_KERNEL); + for (i = 0; i < SE401_NUMSBUF; i++) { + se401->sbuf[i].data = kmalloc(SE401_PACKETSIZE, GFP_KERNEL); if (!se401->sbuf[i].data) { - for(i = i - 1; i >= 0; i--) { + for (i = i - 1; i >= 0; i--) { kfree(se401->sbuf[i].data); se401->sbuf[i].data = NULL; } @@ -467,26 +472,26 @@ static int se401_start_stream(struct usb_se401 *se401) } } - se401->bayeroffset=0; - se401->scratch_next=0; - se401->scratch_use=0; - se401->scratch_overflow=0; - for (i=0; i<SE401_NUMSCRATCH; i++) { - se401->scratch[i].data=kmalloc(SE401_PACKETSIZE, GFP_KERNEL); + se401->bayeroffset = 0; + se401->scratch_next = 0; + se401->scratch_use = 0; + se401->scratch_overflow = 0; + for (i = 0; i < SE401_NUMSCRATCH; i++) { + se401->scratch[i].data = kmalloc(SE401_PACKETSIZE, GFP_KERNEL); if (!se401->scratch[i].data) { - for(i = i - 1; i >= 0; i--) { + for (i = i - 1; i >= 0; i--) { kfree(se401->scratch[i].data); se401->scratch[i].data = NULL; } goto nomem_sbuf; } - se401->scratch[i].state=BUFFER_UNUSED; + se401->scratch[i].state = BUFFER_UNUSED; } - for (i=0; i<SE401_NUMSBUF; i++) { - urb=usb_alloc_urb(0, GFP_KERNEL); - if(!urb) { - for(i = i - 1; i >= 0; i--) { + for (i = 0; i < SE401_NUMSBUF; i++) { + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + for (i = i - 1; i >= 0; i--) { usb_kill_urb(se401->urb[i]); usb_free_urb(se401->urb[i]); se401->urb[i] = NULL; @@ -500,24 +505,24 @@ static int se401_start_stream(struct usb_se401 *se401) se401_video_irq, se401); - se401->urb[i]=urb; + se401->urb[i] = urb; - err=usb_submit_urb(se401->urb[i], GFP_KERNEL); - if(err) + err = usb_submit_urb(se401->urb[i], GFP_KERNEL); + if (err) err("urb burned down"); } - se401->framecount=0; + se401->framecount = 0; return 0; nomem_scratch: - for (i=0; i<SE401_NUMSCRATCH; i++) { + for (i = 0; i < SE401_NUMSCRATCH; i++) { kfree(se401->scratch[i].data); se401->scratch[i].data = NULL; } nomem_sbuf: - for (i=0; i<SE401_NUMSBUF; i++) { + for (i = 0; i < SE401_NUMSBUF; i++) { kfree(se401->sbuf[i].data); se401->sbuf[i].data = NULL; } @@ -531,22 +536,23 @@ static int se401_stop_stream(struct usb_se401 *se401) if (!se401->streaming || !se401->dev) return 1; - se401->streaming=0; + se401->streaming = 0; se401_sndctrl(1, se401, SE401_REQ_STOP_CONTINUOUS_CAPTURE, 0, NULL, 0); se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 0, NULL, 0); se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 0, NULL, 0); - for (i=0; i<SE401_NUMSBUF; i++) if (se401->urb[i]) { - usb_kill_urb(se401->urb[i]); - usb_free_urb(se401->urb[i]); - se401->urb[i]=NULL; - kfree(se401->sbuf[i].data); - } - for (i=0; i<SE401_NUMSCRATCH; i++) { + for (i = 0; i < SE401_NUMSBUF; i++) + if (se401->urb[i]) { + usb_kill_urb(se401->urb[i]); + usb_free_urb(se401->urb[i]); + se401->urb[i] = NULL; + kfree(se401->sbuf[i].data); + } + for (i = 0; i < SE401_NUMSCRATCH; i++) { kfree(se401->scratch[i].data); - se401->scratch[i].data=NULL; + se401->scratch[i].data = NULL; } return 0; @@ -554,9 +560,9 @@ static int se401_stop_stream(struct usb_se401 *se401) static int se401_set_size(struct usb_se401 *se401, int width, int height) { - int wasstreaming=se401->streaming; + int wasstreaming = se401->streaming; /* Check to see if we need to change */ - if (se401->cwidth==width && se401->cheight==height) + if (se401->cwidth == width && se401->cheight == height) return 0; /* Check for a valid mode */ @@ -564,16 +570,16 @@ static int se401_set_size(struct usb_se401 *se401, int width, int height) return 1; if ((width & 1) || (height & 1)) return 1; - if (width>se401->width[se401->sizes-1]) + if (width > se401->width[se401->sizes-1]) return 1; - if (height>se401->height[se401->sizes-1]) + if (height > se401->height[se401->sizes-1]) return 1; /* Stop a current stream and start it again at the new size */ if (wasstreaming) se401_stop_stream(se401); - se401->cwidth=width; - se401->cheight=height; + se401->cwidth = width; + se401->cheight = height; if (wasstreaming) se401_start_stream(se401); return 0; @@ -594,68 +600,68 @@ static int se401_set_size(struct usb_se401 *se401, int width, int height) static inline void enhance_picture(unsigned char *frame, int len) { while (len--) { - *frame=(((*frame^255)*(*frame^255))/255)^255; + *frame = (((*frame^255)*(*frame^255))/255)^255; frame++; } } static inline void decode_JangGu_integrate(struct usb_se401 *se401, int data) { - struct se401_frame *frame=&se401->frame[se401->curframe]; - int linelength=se401->cwidth*3; + struct se401_frame *frame = &se401->frame[se401->curframe]; + int linelength = se401->cwidth * 3; if (frame->curlinepix >= linelength) { - frame->curlinepix=0; - frame->curline+=linelength; + frame->curlinepix = 0; + frame->curline += linelength; } /* First three are absolute, all others relative. * Format is rgb from right to left (mirrorred image), * we flip it to get bgr from left to right. */ - if (frame->curlinepix < 3) { - *(frame->curline-frame->curlinepix)=1+data*4; - } else { - *(frame->curline-frame->curlinepix)= - *(frame->curline-frame->curlinepix+3)+data*4; - } + if (frame->curlinepix < 3) + *(frame->curline-frame->curlinepix) = 1 + data * 4; + else + *(frame->curline-frame->curlinepix) = + *(frame->curline-frame->curlinepix + 3) + data * 4; frame->curlinepix++; } -static inline void decode_JangGu_vlc (struct usb_se401 *se401, unsigned char *data, int bit_exp, int packetlength) +static inline void decode_JangGu_vlc(struct usb_se401 *se401, + unsigned char *data, int bit_exp, int packetlength) { - int pos=0; - int vlc_cod=0; - int vlc_size=0; - int vlc_data=0; + int pos = 0; + int vlc_cod = 0; + int vlc_size = 0; + int vlc_data = 0; int bit_cur; int bit; - data+=4; + data += 4; while (pos < packetlength) { - bit_cur=8; + bit_cur = 8; while (bit_cur && bit_exp) { - bit=((*data)>>(bit_cur-1))&1; + bit = ((*data) >> (bit_cur-1))&1; if (!vlc_cod) { if (bit) { vlc_size++; } else { - if (!vlc_size) { + if (!vlc_size) decode_JangGu_integrate(se401, 0); - } else { - vlc_cod=2; - vlc_data=0; + else { + vlc_cod = 2; + vlc_data = 0; } } } else { - if (vlc_cod==2) { + if (vlc_cod == 2) { if (!bit) - vlc_data = -(1<<vlc_size) + 1; + vlc_data = -(1 << vlc_size) + 1; vlc_cod--; } vlc_size--; - vlc_data+=bit<<vlc_size; + vlc_data += bit << vlc_size; if (!vlc_size) { decode_JangGu_integrate(se401, vlc_data); - vlc_cod=0; + vlc_cod = 0; } } bit_cur--; @@ -666,186 +672,188 @@ static inline void decode_JangGu_vlc (struct usb_se401 *se401, unsigned char *da } } -static inline void decode_JangGu (struct usb_se401 *se401, struct se401_scratch *buffer) +static inline void decode_JangGu(struct usb_se401 *se401, + struct se401_scratch *buffer) { - unsigned char *data=buffer->data; - int len=buffer->length; - int bit_exp=0, pix_exp=0, frameinfo=0, packetlength=0, size; - int datapos=0; + unsigned char *data = buffer->data; + int len = buffer->length; + int bit_exp = 0, pix_exp = 0, frameinfo = 0, packetlength = 0, size; + int datapos = 0; /* New image? */ if (!se401->frame[se401->curframe].curpix) { - se401->frame[se401->curframe].curlinepix=0; - se401->frame[se401->curframe].curline= + se401->frame[se401->curframe].curlinepix = 0; + se401->frame[se401->curframe].curline = se401->frame[se401->curframe].data+ - se401->cwidth*3-1; - if (se401->frame[se401->curframe].grabstate==FRAME_READY) - se401->frame[se401->curframe].grabstate=FRAME_GRABBING; - se401->vlcdatapos=0; + se401->cwidth * 3 - 1; + if (se401->frame[se401->curframe].grabstate == FRAME_READY) + se401->frame[se401->curframe].grabstate = FRAME_GRABBING; + se401->vlcdatapos = 0; } while (datapos < len) { - size=1024-se401->vlcdatapos; + size = 1024 - se401->vlcdatapos; if (size+datapos > len) - size=len-datapos; + size = len-datapos; memcpy(se401->vlcdata+se401->vlcdatapos, data+datapos, size); - se401->vlcdatapos+=size; - packetlength=0; + se401->vlcdatapos += size; + packetlength = 0; if (se401->vlcdatapos >= 4) { - bit_exp=se401->vlcdata[3]+(se401->vlcdata[2]<<8); - pix_exp=se401->vlcdata[1]+((se401->vlcdata[0]&0x3f)<<8); - frameinfo=se401->vlcdata[0]&0xc0; - packetlength=((bit_exp+47)>>4)<<1; + bit_exp = se401->vlcdata[3] + (se401->vlcdata[2] << 8); + pix_exp = se401->vlcdata[1] + + ((se401->vlcdata[0] & 0x3f) << 8); + frameinfo = se401->vlcdata[0] & 0xc0; + packetlength = ((bit_exp + 47) >> 4) << 1; if (packetlength > 1024) { - se401->vlcdatapos=0; - datapos=len; - packetlength=0; + se401->vlcdatapos = 0; + datapos = len; + packetlength = 0; se401->error++; - se401->frame[se401->curframe].curpix=0; + se401->frame[se401->curframe].curpix = 0; } } if (packetlength && se401->vlcdatapos >= packetlength) { - decode_JangGu_vlc(se401, se401->vlcdata, bit_exp, packetlength); - se401->frame[se401->curframe].curpix+=pix_exp*3; - datapos+=size-(se401->vlcdatapos-packetlength); - se401->vlcdatapos=0; - if (se401->frame[se401->curframe].curpix>=se401->cwidth*se401->cheight*3) { - if (se401->frame[se401->curframe].curpix==se401->cwidth*se401->cheight*3) { - if (se401->frame[se401->curframe].grabstate==FRAME_GRABBING) { - se401->frame[se401->curframe].grabstate=FRAME_DONE; + decode_JangGu_vlc(se401, se401->vlcdata, bit_exp, + packetlength); + se401->frame[se401->curframe].curpix += pix_exp * 3; + datapos += size-(se401->vlcdatapos-packetlength); + se401->vlcdatapos = 0; + if (se401->frame[se401->curframe].curpix >= se401->cwidth * se401->cheight * 3) { + if (se401->frame[se401->curframe].curpix == se401->cwidth * se401->cheight * 3) { + if (se401->frame[se401->curframe].grabstate == FRAME_GRABBING) { + se401->frame[se401->curframe].grabstate = FRAME_DONE; se401->framecount++; se401->readcount++; } - if (se401->frame[(se401->curframe+1)&(SE401_NUMFRAMES-1)].grabstate==FRAME_READY) { - se401->curframe=(se401->curframe+1) & (SE401_NUMFRAMES-1); - } - } else { + if (se401->frame[(se401->curframe + 1) & (SE401_NUMFRAMES - 1)].grabstate == FRAME_READY) + se401->curframe = (se401->curframe + 1) & (SE401_NUMFRAMES - 1); + } else se401->error++; - } - se401->frame[se401->curframe].curpix=0; - datapos=len; + se401->frame[se401->curframe].curpix = 0; + datapos = len; } - } else { - datapos+=size; - } + } else + datapos += size; } } -static inline void decode_bayer (struct usb_se401 *se401, struct se401_scratch *buffer) +static inline void decode_bayer(struct usb_se401 *se401, + struct se401_scratch *buffer) { - unsigned char *data=buffer->data; - int len=buffer->length; - int offset=buffer->offset; - int datasize=se401->cwidth*se401->cheight; - struct se401_frame *frame=&se401->frame[se401->curframe]; + unsigned char *data = buffer->data; + int len = buffer->length; + int offset = buffer->offset; + int datasize = se401->cwidth * se401->cheight; + struct se401_frame *frame = &se401->frame[se401->curframe]; + unsigned char *framedata = frame->data, *curline, *nextline; + int width = se401->cwidth; + int blineoffset = 0, bline; + int linelength = width * 3, i; - unsigned char *framedata=frame->data, *curline, *nextline; - int width=se401->cwidth; - int blineoffset=0, bline; - int linelength=width*3, i; + if (frame->curpix == 0) { + if (frame->grabstate == FRAME_READY) + frame->grabstate = FRAME_GRABBING; - if (frame->curpix==0) { - if (frame->grabstate==FRAME_READY) { - frame->grabstate=FRAME_GRABBING; - } - frame->curline=framedata+linelength; - frame->curlinepix=0; + frame->curline = framedata + linelength; + frame->curlinepix = 0; } - if (offset!=frame->curpix) { + if (offset != frame->curpix) { /* Regard frame as lost :( */ - frame->curpix=0; + frame->curpix = 0; se401->error++; return; } /* Check if we have to much data */ - if (frame->curpix+len > datasize) { - len=datasize-frame->curpix; - } - if (se401->cheight%4) - blineoffset=1; - bline=frame->curpix/se401->cwidth+blineoffset; - - curline=frame->curline; - nextline=curline+linelength; - if (nextline >= framedata+datasize*3) - nextline=curline; + if (frame->curpix + len > datasize) + len = datasize-frame->curpix; + + if (se401->cheight % 4) + blineoffset = 1; + bline = frame->curpix / se401->cwidth+blineoffset; + + curline = frame->curline; + nextline = curline + linelength; + if (nextline >= framedata+datasize * 3) + nextline = curline; while (len) { - if (frame->curlinepix>=width) { - frame->curlinepix-=width; - bline=frame->curpix/width+blineoffset; - curline+=linelength*2; - nextline+=linelength*2; - if (curline >= framedata+datasize*3) { + if (frame->curlinepix >= width) { + frame->curlinepix -= width; + bline = frame->curpix / width + blineoffset; + curline += linelength*2; + nextline += linelength*2; + if (curline >= framedata+datasize * 3) { frame->curlinepix++; - curline-=3; - nextline-=3; + curline -= 3; + nextline -= 3; len--; data++; frame->curpix++; } if (nextline >= framedata+datasize*3) - nextline=curline; + nextline = curline; } - if ((bline&1)) { - if ((frame->curlinepix&1)) { - *(curline+2)=*data; - *(curline-1)=*data; - *(nextline+2)=*data; - *(nextline-1)=*data; + if (bline & 1) { + if (frame->curlinepix & 1) { + *(curline + 2) = *data; + *(curline - 1) = *data; + *(nextline + 2) = *data; + *(nextline - 1) = *data; } else { - *(curline+1)= - (*(curline+1)+*data)/2; - *(curline-2)= - (*(curline-2)+*data)/2; - *(nextline+1)=*data; - *(nextline-2)=*data; + *(curline + 1) = + (*(curline + 1) + *data) / 2; + *(curline-2) = + (*(curline - 2) + *data) / 2; + *(nextline + 1) = *data; + *(nextline - 2) = *data; } } else { - if ((frame->curlinepix&1)) { - *(curline+1)= - (*(curline+1)+*data)/2; - *(curline-2)= - (*(curline-2)+*data)/2; - *(nextline+1)=*data; - *(nextline-2)=*data; + if (frame->curlinepix & 1) { + *(curline + 1) = + (*(curline + 1) + *data) / 2; + *(curline - 2) = + (*(curline - 2) + *data) / 2; + *(nextline + 1) = *data; + *(nextline - 2) = *data; } else { - *curline=*data; - *(curline-3)=*data; - *nextline=*data; - *(nextline-3)=*data; + *curline = *data; + *(curline - 3) = *data; + *nextline = *data; + *(nextline - 3) = *data; } } frame->curlinepix++; - curline-=3; - nextline-=3; + curline -= 3; + nextline -= 3; len--; data++; frame->curpix++; } - frame->curline=curline; + frame->curline = curline; - if (frame->curpix>=datasize) { + if (frame->curpix >= datasize) { /* Fix the top line */ - framedata+=linelength; - for (i=0; i<linelength; i++) { + framedata += linelength; + for (i = 0; i < linelength; i++) { framedata--; - *framedata=*(framedata+linelength); + *framedata = *(framedata + linelength); } /* Fix the left side (green is already present) */ - for (i=0; i<se401->cheight; i++) { - *framedata=*(framedata+3); - *(framedata+1)=*(framedata+4); - *(framedata+2)=*(framedata+5); - framedata+=linelength; + for (i = 0; i < se401->cheight; i++) { + *framedata = *(framedata + 3); + *(framedata + 1) = *(framedata + 4); + *(framedata + 2) = *(framedata + 5); + framedata += linelength; } - frame->curpix=0; - frame->grabstate=FRAME_DONE; + frame->curpix = 0; + frame->grabstate = FRAME_DONE; se401->framecount++; se401->readcount++; - if (se401->frame[(se401->curframe+1)&(SE401_NUMFRAMES-1)].grabstate==FRAME_READY) { - se401->curframe=(se401->curframe+1) & (SE401_NUMFRAMES-1); + if (se401->frame[(se401->curframe + 1) & + (SE401_NUMFRAMES - 1)].grabstate == FRAME_READY) { + se401->curframe = (se401->curframe+1) & + (SE401_NUMFRAMES-1); } } } @@ -853,72 +861,76 @@ static inline void decode_bayer (struct usb_se401 *se401, struct se401_scratch * static int se401_newframe(struct usb_se401 *se401, int framenr) { DECLARE_WAITQUEUE(wait, current); - int errors=0; + int errors = 0; while (se401->streaming && - (se401->frame[framenr].grabstate==FRAME_READY || - se401->frame[framenr].grabstate==FRAME_GRABBING) ) { - if(!se401->frame[framenr].curpix) { + (se401->frame[framenr].grabstate == FRAME_READY || + se401->frame[framenr].grabstate == FRAME_GRABBING)) { + if (!se401->frame[framenr].curpix) errors++; - } + wait_interruptible( - se401->scratch[se401->scratch_use].state!=BUFFER_READY, - &se401->wq, - &wait - ); + se401->scratch[se401->scratch_use].state != BUFFER_READY, + &se401->wq, &wait); if (se401->nullpackets > SE401_MAX_NULLPACKETS) { - se401->nullpackets=0; + se401->nullpackets = 0; dev_info(&se401->dev->dev, - "too many null length packets, restarting capture\n"); + "too many null length packets, restarting capture\n"); se401_stop_stream(se401); se401_start_stream(se401); } else { - if (se401->scratch[se401->scratch_use].state!=BUFFER_READY) { - se401->frame[framenr].grabstate=FRAME_ERROR; + if (se401->scratch[se401->scratch_use].state != + BUFFER_READY) { + se401->frame[framenr].grabstate = FRAME_ERROR; return -EIO; } - se401->scratch[se401->scratch_use].state=BUFFER_BUSY; - if (se401->format==FMT_JANGGU) { - decode_JangGu(se401, &se401->scratch[se401->scratch_use]); - } else { - decode_bayer(se401, &se401->scratch[se401->scratch_use]); - } - se401->scratch[se401->scratch_use].state=BUFFER_UNUSED; + se401->scratch[se401->scratch_use].state = BUFFER_BUSY; + if (se401->format == FMT_JANGGU) + decode_JangGu(se401, + &se401->scratch[se401->scratch_use]); + else + decode_bayer(se401, + &se401->scratch[se401->scratch_use]); + + se401->scratch[se401->scratch_use].state = + BUFFER_UNUSED; se401->scratch_use++; - if (se401->scratch_use>=SE401_NUMSCRATCH) - se401->scratch_use=0; + if (se401->scratch_use >= SE401_NUMSCRATCH) + se401->scratch_use = 0; if (errors > SE401_MAX_ERRORS) { - errors=0; + errors = 0; dev_info(&se401->dev->dev, - "too many errors, restarting capture\n"); + "too many errors, restarting capture\n"); se401_stop_stream(se401); se401_start_stream(se401); } } } - if (se401->frame[framenr].grabstate==FRAME_DONE) + if (se401->frame[framenr].grabstate == FRAME_DONE) if (se401->enhance) - enhance_picture(se401->frame[framenr].data, se401->cheight*se401->cwidth*3); + enhance_picture(se401->frame[framenr].data, + se401->cheight * se401->cwidth * 3); return 0; } -static void usb_se401_remove_disconnected (struct usb_se401 *se401) +static void usb_se401_remove_disconnected(struct usb_se401 *se401) { int i; se401->dev = NULL; - for (i=0; i<SE401_NUMSBUF; i++) + for (i = 0; i < SE401_NUMSBUF; i++) if (se401->urb[i]) { usb_kill_urb(se401->urb[i]); usb_free_urb(se401->urb[i]); se401->urb[i] = NULL; kfree(se401->sbuf[i].data); } - for (i=0; i<SE401_NUMSCRATCH; i++) { + + for (i = 0; i < SE401_NUMSCRATCH; i++) kfree(se401->scratch[i].data); - } + if (se401->inturb) { usb_kill_urb(se401->inturb); usb_free_urb(se401->inturb); @@ -973,11 +985,11 @@ static int se401_close(struct file *file) dev_info(&se401->dev->dev, "device unregistered\n"); usb_se401_remove_disconnected(se401); } else { - for (i=0; i<SE401_NUMFRAMES; i++) - se401->frame[i].grabstate=FRAME_UNUSED; + for (i = 0; i < SE401_NUMFRAMES; i++) + se401->frame[i].grabstate = FRAME_UNUSED; if (se401->streaming) se401_stop_stream(se401); - se401->user=0; + se401->user = 0; } file->private_data = NULL; return 0; @@ -1073,7 +1085,7 @@ static long se401_do_ioctl(struct file *file, unsigned int cmd, void *arg) memset(vm, 0, sizeof(*vm)); vm->size = SE401_NUMFRAMES * se401->maxframesize; vm->frames = SE401_NUMFRAMES; - for (i=0; i<SE401_NUMFRAMES; i++) + for (i = 0; i < SE401_NUMFRAMES; i++) vm->offsets[i] = se401->maxframesize * i; return 0; } @@ -1091,16 +1103,16 @@ static long se401_do_ioctl(struct file *file, unsigned int cmd, void *arg) /* Is this according to the v4l spec??? */ if (se401_set_size(se401, vm->width, vm->height)) return -EINVAL; - se401->frame[vm->frame].grabstate=FRAME_READY; + se401->frame[vm->frame].grabstate = FRAME_READY; if (!se401->streaming) se401_start_stream(se401); /* Set the picture properties */ - if (se401->framecount==0) + if (se401->framecount == 0) se401_send_pict(se401); /* Calibrate the reset level after a few frames. */ - if (se401->framecount%20==1) + if (se401->framecount % 20 == 1) se401_auto_resetlevel(se401); return 0; @@ -1108,13 +1120,13 @@ static long se401_do_ioctl(struct file *file, unsigned int cmd, void *arg) case VIDIOCSYNC: { int *frame = arg; - int ret=0; + int ret = 0; - if(*frame <0 || *frame >= SE401_NUMFRAMES) + if (*frame < 0 || *frame >= SE401_NUMFRAMES) return -EINVAL; - ret=se401_newframe(se401, *frame); - se401->frame[*frame].grabstate=FRAME_UNUSED; + ret = se401_newframe(se401, *frame); + se401->frame[*frame].grabstate = FRAME_UNUSED; return ret; } case VIDIOCGFBUF: @@ -1155,36 +1167,36 @@ static long se401_ioctl(struct file *file, static ssize_t se401_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { - int realcount=count, ret=0; + int realcount = count, ret = 0; struct video_device *dev = file->private_data; struct usb_se401 *se401 = (struct usb_se401 *)dev; - if (se401->dev == NULL) + if (se401->dev == NULL) return -EIO; if (realcount > se401->cwidth*se401->cheight*3) - realcount=se401->cwidth*se401->cheight*3; + realcount = se401->cwidth*se401->cheight*3; /* Shouldn't happen: */ - if (se401->frame[0].grabstate==FRAME_GRABBING) + if (se401->frame[0].grabstate == FRAME_GRABBING) return -EBUSY; - se401->frame[0].grabstate=FRAME_READY; - se401->frame[1].grabstate=FRAME_UNUSED; - se401->curframe=0; + se401->frame[0].grabstate = FRAME_READY; + se401->frame[1].grabstate = FRAME_UNUSED; + se401->curframe = 0; if (!se401->streaming) se401_start_stream(se401); /* Set the picture properties */ - if (se401->framecount==0) + if (se401->framecount == 0) se401_send_pict(se401); /* Calibrate the reset level after a few frames. */ - if (se401->framecount%20==1) + if (se401->framecount%20 == 1) se401_auto_resetlevel(se401); - ret=se401_newframe(se401, 0); + ret = se401_newframe(se401, 0); - se401->frame[0].grabstate=FRAME_UNUSED; + se401->frame[0].grabstate = FRAME_UNUSED; if (ret) return ret; if (copy_to_user(buf, se401->frame[0].data, realcount)) @@ -1203,11 +1215,12 @@ static int se401_mmap(struct file *file, struct vm_area_struct *vma) mutex_lock(&se401->lock); - if (se401->dev == NULL) { + if (se401->dev == NULL) { mutex_unlock(&se401->lock); return -EIO; } - if (size > (((SE401_NUMFRAMES * se401->maxframesize) + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))) { + if (size > (((SE401_NUMFRAMES * se401->maxframesize) + PAGE_SIZE - 1) + & ~(PAGE_SIZE - 1))) { mutex_unlock(&se401->lock); return -EINVAL; } @@ -1218,10 +1231,10 @@ static int se401_mmap(struct file *file, struct vm_area_struct *vma) mutex_unlock(&se401->lock); return -EAGAIN; } - start += PAGE_SIZE; - pos += PAGE_SIZE; + start += PAGE_SIZE; + pos += PAGE_SIZE; if (size > PAGE_SIZE) - size -= PAGE_SIZE; + size -= PAGE_SIZE; else size = 0; } @@ -1231,7 +1244,7 @@ static int se401_mmap(struct file *file, struct vm_area_struct *vma) } static const struct v4l2_file_operations se401_fops = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, .open = se401_open, .release = se401_close, .read = se401_read, @@ -1249,71 +1262,76 @@ static struct video_device se401_template = { /***************************/ static int se401_init(struct usb_se401 *se401, int button) { - int i=0, rc; + int i = 0, rc; unsigned char cp[0x40]; char temp[200]; + int slen; /* led on */ se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0); /* get camera descriptor */ - rc=se401_sndctrl(0, se401, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0, cp, sizeof(cp)); - if (cp[1]!=0x41) { + rc = se401_sndctrl(0, se401, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0, + cp, sizeof(cp)); + if (cp[1] != 0x41) { err("Wrong descriptor type"); return 1; } - sprintf (temp, "ExtraFeatures: %d", cp[3]); + slen = snprintf(temp, 200, "ExtraFeatures: %d", cp[3]); - se401->sizes=cp[4]+cp[5]*256; - se401->width=kmalloc(se401->sizes*sizeof(int), GFP_KERNEL); + se401->sizes = cp[4] + cp[5] * 256; + se401->width = kmalloc(se401->sizes*sizeof(int), GFP_KERNEL); if (!se401->width) return 1; - se401->height=kmalloc(se401->sizes*sizeof(int), GFP_KERNEL); + se401->height = kmalloc(se401->sizes*sizeof(int), GFP_KERNEL); if (!se401->height) { kfree(se401->width); return 1; } - for (i=0; i<se401->sizes; i++) { - se401->width[i]=cp[6+i*4+0]+cp[6+i*4+1]*256; - se401->height[i]=cp[6+i*4+2]+cp[6+i*4+3]*256; + for (i = 0; i < se401->sizes; i++) { + se401->width[i] = cp[6 + i * 4 + 0] + cp[6 + i*4 + 1] * 256; + se401->height[i] = cp[6 + i * 4 + 2] + cp[6 + i * 4 + 3] * 256; } - sprintf (temp, "%s Sizes:", temp); - for (i=0; i<se401->sizes; i++) { - sprintf(temp, "%s %dx%d", temp, se401->width[i], se401->height[i]); + slen += snprintf(temp + slen, 200 - slen, " Sizes:"); + for (i = 0; i < se401->sizes; i++) { + slen += snprintf(temp + slen, 200 - slen, + " %dx%d", se401->width[i], se401->height[i]); } dev_info(&se401->dev->dev, "%s\n", temp); - se401->maxframesize=se401->width[se401->sizes-1]*se401->height[se401->sizes-1]*3; + se401->maxframesize = se401->width[se401->sizes-1] * + se401->height[se401->sizes - 1] * 3; - rc=se401_sndctrl(0, se401, SE401_REQ_GET_WIDTH, 0, cp, sizeof(cp)); - se401->cwidth=cp[0]+cp[1]*256; - rc=se401_sndctrl(0, se401, SE401_REQ_GET_HEIGHT, 0, cp, sizeof(cp)); - se401->cheight=cp[0]+cp[1]*256; + rc = se401_sndctrl(0, se401, SE401_REQ_GET_WIDTH, 0, cp, sizeof(cp)); + se401->cwidth = cp[0]+cp[1]*256; + rc = se401_sndctrl(0, se401, SE401_REQ_GET_HEIGHT, 0, cp, sizeof(cp)); + se401->cheight = cp[0]+cp[1]*256; if (!(cp[2] & SE401_FORMAT_BAYER)) { err("Bayer format not supported!"); return 1; } /* set output mode (BAYER) */ - se401_sndctrl(1, se401, SE401_REQ_SET_OUTPUT_MODE, SE401_FORMAT_BAYER, NULL, 0); + se401_sndctrl(1, se401, SE401_REQ_SET_OUTPUT_MODE, + SE401_FORMAT_BAYER, NULL, 0); - rc=se401_sndctrl(0, se401, SE401_REQ_GET_BRT, 0, cp, sizeof(cp)); - se401->brightness=cp[0]+cp[1]*256; + rc = se401_sndctrl(0, se401, SE401_REQ_GET_BRT, 0, cp, sizeof(cp)); + se401->brightness = cp[0]+cp[1]*256; /* some default values */ - se401->resetlevel=0x2d; - se401->rgain=0x20; - se401->ggain=0x20; - se401->bgain=0x20; + se401->resetlevel = 0x2d; + se401->rgain = 0x20; + se401->ggain = 0x20; + se401->bgain = 0x20; se401_set_exposure(se401, 20000); - se401->palette=VIDEO_PALETTE_RGB24; - se401->enhance=1; - se401->dropped=0; - se401->error=0; - se401->framecount=0; - se401->readcount=0; + se401->palette = VIDEO_PALETTE_RGB24; + se401->enhance = 1; + se401->dropped = 0; + se401->error = 0; + se401->framecount = 0; + se401->readcount = 0; /* Start interrupt transfers for snapshot button */ if (button) { - se401->inturb=usb_alloc_urb(0, GFP_KERNEL); + se401->inturb = usb_alloc_urb(0, GFP_KERNEL); if (!se401->inturb) { dev_info(&se401->dev->dev, "Allocation of inturb failed\n"); @@ -1331,7 +1349,7 @@ static int se401_init(struct usb_se401 *se401, int button) return 1; } } else - se401->inturb=NULL; + se401->inturb = NULL; /* Flash the led */ se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0); @@ -1348,8 +1366,8 @@ static int se401_probe(struct usb_interface *intf, struct usb_device *dev = interface_to_usbdev(intf); struct usb_interface_descriptor *interface; struct usb_se401 *se401; - char *camera_name=NULL; - int button=1; + char *camera_name = NULL; + int button = 1; /* We don't handle multi-config cameras */ if (dev->descriptor.bNumConfigurations != 1) @@ -1358,22 +1376,22 @@ static int se401_probe(struct usb_interface *intf, interface = &intf->cur_altsetting->desc; /* Is it an se401? */ - if (le16_to_cpu(dev->descriptor.idVendor) == 0x03e8 && - le16_to_cpu(dev->descriptor.idProduct) == 0x0004) { - camera_name="Endpoints/Aox SE401"; - } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x0471 && - le16_to_cpu(dev->descriptor.idProduct) == 0x030b) { - camera_name="Philips PCVC665K"; - } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d && - le16_to_cpu(dev->descriptor.idProduct) == 0x5001) { - camera_name="Kensington VideoCAM 67014"; - } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d && - le16_to_cpu(dev->descriptor.idProduct) == 0x5002) { - camera_name="Kensington VideoCAM 6701(5/7)"; - } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d && - le16_to_cpu(dev->descriptor.idProduct) == 0x5003) { - camera_name="Kensington VideoCAM 67016"; - button=0; + if (le16_to_cpu(dev->descriptor.idVendor) == 0x03e8 && + le16_to_cpu(dev->descriptor.idProduct) == 0x0004) { + camera_name = "Endpoints/Aox SE401"; + } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x0471 && + le16_to_cpu(dev->descriptor.idProduct) == 0x030b) { + camera_name = "Philips PCVC665K"; + } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d && + le16_to_cpu(dev->descriptor.idProduct) == 0x5001) { + camera_name = "Kensington VideoCAM 67014"; + } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d && + le16_to_cpu(dev->descriptor.idProduct) == 0x5002) { + camera_name = "Kensington VideoCAM 6701(5/7)"; + } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d && + le16_to_cpu(dev->descriptor.idProduct) == 0x5003) { + camera_name = "Kensington VideoCAM 67016"; + button = 0; } else return -ENODEV; @@ -1386,7 +1404,8 @@ static int se401_probe(struct usb_interface *intf, /* We found one */ dev_info(&intf->dev, "SE401 camera found: %s\n", camera_name); - if ((se401 = kzalloc(sizeof(*se401), GFP_KERNEL)) == NULL) { + se401 = kzalloc(sizeof(*se401), GFP_KERNEL); + if (se401 == NULL) { err("couldn't kmalloc se401 struct"); return -ENOMEM; } @@ -1404,12 +1423,14 @@ static int se401_probe(struct usb_interface *intf, } memcpy(&se401->vdev, &se401_template, sizeof(se401_template)); - memcpy(se401->vdev.name, se401->camera_name, strlen(se401->camera_name)); + memcpy(se401->vdev.name, se401->camera_name, + strlen(se401->camera_name)); init_waitqueue_head(&se401->wq); mutex_init(&se401->lock); wmb(); - if (video_register_device(&se401->vdev, VFL_TYPE_GRABBER, video_nr) < 0) { + if (video_register_device(&se401->vdev, + VFL_TYPE_GRABBER, video_nr) < 0) { kfree(se401); err("video_register_device failed"); return -EIO; @@ -1417,20 +1438,20 @@ static int se401_probe(struct usb_interface *intf, dev_info(&intf->dev, "registered new video device: video%d\n", se401->vdev.num); - usb_set_intfdata (intf, se401); + usb_set_intfdata(intf, se401); return 0; } static void se401_disconnect(struct usb_interface *intf) { - struct usb_se401 *se401 = usb_get_intfdata (intf); + struct usb_se401 *se401 = usb_get_intfdata(intf); - usb_set_intfdata (intf, NULL); + usb_set_intfdata(intf, NULL); if (se401) { video_unregister_device(&se401->vdev); - if (!se401->user){ + if (!se401->user) usb_se401_remove_disconnected(se401); - } else { + else { se401->frame[0].grabstate = FRAME_ERROR; se401->frame[0].grabstate = FRAME_ERROR; @@ -1443,10 +1464,10 @@ static void se401_disconnect(struct usb_interface *intf) } static struct usb_driver se401_driver = { - .name = "se401", - .id_table = device_table, - .probe = se401_probe, - .disconnect = se401_disconnect, + .name = "se401", + .id_table = device_table, + .probe = se401_probe, + .disconnect = se401_disconnect, }; @@ -1459,9 +1480,10 @@ static struct usb_driver se401_driver = { static int __init usb_se401_init(void) { - printk(KERN_INFO "SE401 usb camera driver version %s registering\n", version); + printk(KERN_INFO "SE401 usb camera driver version %s registering\n", + version); if (flickerless) - if (flickerless!=50 && flickerless!=60) { + if (flickerless != 50 && flickerless != 60) { printk(KERN_ERR "Invallid flickerless value, use 0, 50 or 60.\n"); return -1; } diff --git a/linux/drivers/media/video/se401.h b/linux/drivers/media/video/se401.h index 0be02c48b..00f0ddbf4 100644 --- a/linux/drivers/media/video/se401.h +++ b/linux/drivers/media/video/se401.h @@ -2,7 +2,7 @@ #ifndef __LINUX_se401_H #define __LINUX_se401_H -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include "compat.h" #include <linux/videodev.h> #include <media/v4l2-common.h> @@ -13,9 +13,10 @@ #ifdef se401_DEBUG # define PDEBUG(level, fmt, args...) \ -if (debug >= level) info("[" __PRETTY_FUNCTION__ ":%d] " fmt, __LINE__ , ## args) +if (debug >= level) \ + info("[" __PRETTY_FUNCTION__ ":%d] " fmt, __LINE__ , ## args) #else -# define PDEBUG(level, fmt, args...) do {} while(0) +# define PDEBUG(level, fmt, args...) do {} while (0) #endif /* An almost drop-in replacement for sleep_on_interruptible */ diff --git a/linux/drivers/media/video/sh_mobile_ceu_camera.c b/linux/drivers/media/video/sh_mobile_ceu_camera.c index bf0b176f9..7ea2a0edf 100644 --- a/linux/drivers/media/video/sh_mobile_ceu_camera.c +++ b/linux/drivers/media/video/sh_mobile_ceu_camera.c @@ -690,16 +690,8 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, /* FIXME: calculate using depth and bus width */ - if (f->fmt.pix.height < 4) - f->fmt.pix.height = 4; - if (f->fmt.pix.height > 1920) - f->fmt.pix.height = 1920; - if (f->fmt.pix.width < 2) - f->fmt.pix.width = 2; - if (f->fmt.pix.width > 2560) - f->fmt.pix.width = 2560; - f->fmt.pix.width &= ~0x01; - f->fmt.pix.height &= ~0x03; + v4l_bound_align_image(&f->fmt.pix.width, 2, 2560, 1, + &f->fmt.pix.height, 4, 1920, 2, 0); f->fmt.pix.bytesperline = f->fmt.pix.width * DIV_ROUND_UP(xlate->host_fmt->depth, 8); diff --git a/linux/drivers/media/video/soc_camera.c b/linux/drivers/media/video/soc_camera.c index 822052b25..e4056a9c2 100644 --- a/linux/drivers/media/video/soc_camera.c +++ b/linux/drivers/media/video/soc_camera.c @@ -1206,7 +1206,7 @@ static int __devexit soc_camera_pdrv_remove(struct platform_device *pdev) static struct platform_driver __refdata soc_camera_pdrv = { .probe = soc_camera_pdrv_probe, - .remove = __exit_p(soc_camera_pdrv_remove), + .remove = __devexit_p(soc_camera_pdrv_remove), .driver = { .name = "soc-camera-pdrv", .owner = THIS_MODULE, diff --git a/linux/drivers/media/video/tcm825x.c b/linux/drivers/media/video/tcm825x.c index 559ade821..d778c41ef 100644 --- a/linux/drivers/media/video/tcm825x.c +++ b/linux/drivers/media/video/tcm825x.c @@ -882,7 +882,7 @@ static int tcm825x_probe(struct i2c_client *client, return rval; } -static int __exit tcm825x_remove(struct i2c_client *client) +static int tcm825x_remove(struct i2c_client *client) { struct tcm825x_sensor *sensor = i2c_get_clientdata(client); @@ -908,7 +908,7 @@ static struct i2c_driver tcm825x_i2c_driver = { .name = TCM825X_NAME, }, .probe = tcm825x_probe, - .remove = __exit_p(tcm825x_remove), + .remove = tcm825x_remove, #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26) .id_table = tcm825x_id, #endif diff --git a/linux/drivers/media/video/tuner-core.c b/linux/drivers/media/video/tuner-core.c index bb60c910e..85b133df4 100644 --- a/linux/drivers/media/video/tuner-core.c +++ b/linux/drivers/media/video/tuner-core.c @@ -426,18 +426,12 @@ static void set_type(struct i2c_client *c, unsigned int type, break; case TUNER_XC5000: { - struct dvb_tuner_ops *xc_tuner_ops; - xc5000_cfg.i2c_address = t->i2c->addr; /* if_khz will be set when the digital dvb_attach() occurs */ xc5000_cfg.if_khz = 0; if (!dvb_attach(xc5000_attach, &t->fe, t->i2c->adapter, &xc5000_cfg)) goto attach_failed; - - xc_tuner_ops = &t->fe.ops.tuner_ops; - if (xc_tuner_ops->init) - xc_tuner_ops->init(&t->fe); break; } default: diff --git a/linux/drivers/media/video/tveeprom.c b/linux/drivers/media/video/tveeprom.c index 7d6459dd2..5e3c9f4e2 100644 --- a/linux/drivers/media/video/tveeprom.c +++ b/linux/drivers/media/video/tveeprom.c @@ -185,7 +185,7 @@ hauppauge_tuner[] = { TUNER_ABSENT, "Silicon TDA8275C1 8290 FM"}, { TUNER_ABSENT, "Thompson DTT757"}, /* 80-89 */ - { TUNER_PHILIPS_FM1216ME_MK3, "Philips FQ1216LME MK3"}, + { TUNER_PHILIPS_FQ1216LME_MK3, "Philips FQ1216LME MK3"}, { TUNER_LG_PAL_NEW_TAPC, "LG TAPC G701D"}, { TUNER_LG_NTSC_NEW_TAPC, "LG TAPC H791F"}, { TUNER_LG_PAL_NEW_TAPC, "TCL 2002MB 3"}, @@ -230,7 +230,7 @@ hauppauge_tuner[] = { TUNER_ABSENT, "Samsung THPD5222FG30A"}, /* 120-129 */ { TUNER_XC2028, "Xceive XC3028"}, - { TUNER_ABSENT, "Philips FQ1216LME MK5"}, + { TUNER_PHILIPS_FQ1216LME_MK3, "Philips FQ1216LME MK5"}, { TUNER_ABSENT, "Philips FQD1216LME"}, { TUNER_ABSENT, "Conexant CX24118A"}, { TUNER_ABSENT, "TCL DMF11WIP"}, diff --git a/linux/drivers/media/video/tvp514x.c b/linux/drivers/media/video/tvp514x.c index 4262e60b8..3750f7fad 100644 --- a/linux/drivers/media/video/tvp514x.c +++ b/linux/drivers/media/video/tvp514x.c @@ -692,7 +692,7 @@ static int ioctl_s_routing(struct v4l2_int_device *s, break; /* Input detected */ } - if ((current_std == STD_INVALID) || (try_count <= 0)) + if ((current_std == STD_INVALID) || (try_count < 0)) return -EINVAL; decoder->current_std = current_std; diff --git a/linux/drivers/media/video/usbvideo/Kconfig b/linux/drivers/media/video/usbvideo/Kconfig index e4cb99c1f..adb1c044a 100644 --- a/linux/drivers/media/video/usbvideo/Kconfig +++ b/linux/drivers/media/video/usbvideo/Kconfig @@ -38,10 +38,13 @@ config USB_KONICAWC module will be called konicawc. config USB_QUICKCAM_MESSENGER - tristate "USB Logitech Quickcam Messenger" + tristate "USB Logitech Quickcam Messenger (DEPRECATED)" depends on VIDEO_V4L1 select VIDEO_USBVIDEO ---help--- + This driver is DEPRECATED please use the gspca stv06xx module + instead. + Say Y or M here to enable support for the USB Logitech Quickcam Messenger webcam. diff --git a/linux/drivers/media/video/usbvideo/konicawc.c b/linux/drivers/media/video/usbvideo/konicawc.c index 75485168e..07bc85761 100644 --- a/linux/drivers/media/video/usbvideo/konicawc.c +++ b/linux/drivers/media/video/usbvideo/konicawc.c @@ -249,7 +249,7 @@ static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev #endif input_dev->evbit[0] = BIT_MASK(EV_KEY); - input_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0); + input_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA); error = input_register_device(cam->input); if (error) { @@ -272,7 +272,7 @@ static void konicawc_unregister_input(struct konicawc *cam) static void konicawc_report_buttonstat(struct konicawc *cam) { if (cam->input) { - input_report_key(cam->input, BTN_0, cam->buttonsts); + input_report_key(cam->input, KEY_CAMERA, cam->buttonsts); input_sync(cam->input); } } diff --git a/linux/drivers/media/video/usbvideo/quickcam_messenger.c b/linux/drivers/media/video/usbvideo/quickcam_messenger.c index f129bea11..ab30ef54a 100644 --- a/linux/drivers/media/video/usbvideo/quickcam_messenger.c +++ b/linux/drivers/media/video/usbvideo/quickcam_messenger.c @@ -112,7 +112,7 @@ static void qcm_register_input(struct qcm *cam, struct usb_device *dev) #endif input_dev->evbit[0] = BIT_MASK(EV_KEY); - input_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0); + input_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA); error = input_register_device(cam->input); if (error) { @@ -135,7 +135,7 @@ static void qcm_unregister_input(struct qcm *cam) static void qcm_report_buttonstat(struct qcm *cam) { if (cam->input) { - input_report_key(cam->input, BTN_0, cam->button_sts); + input_report_key(cam->input, KEY_CAMERA, cam->button_sts); input_sync(cam->input); } } diff --git a/linux/drivers/media/video/usbvision/usbvision-core.c b/linux/drivers/media/video/usbvision/usbvision-core.c index 9253ec6dd..baf2e5621 100644 --- a/linux/drivers/media/video/usbvision/usbvision-core.c +++ b/linux/drivers/media/video/usbvision/usbvision-core.c @@ -390,10 +390,9 @@ int usbvision_scratch_alloc(struct usb_usbvision *usbvision) void usbvision_scratch_free(struct usb_usbvision *usbvision) { - if (usbvision->scratch != NULL) { - vfree(usbvision->scratch); - usbvision->scratch = NULL; - } + vfree(usbvision->scratch); + usbvision->scratch = NULL; + } /* @@ -506,10 +505,9 @@ int usbvision_decompress_alloc(struct usb_usbvision *usbvision) */ void usbvision_decompress_free(struct usb_usbvision *usbvision) { - if (usbvision->IntraFrameBuffer != NULL) { - vfree(usbvision->IntraFrameBuffer); - usbvision->IntraFrameBuffer = NULL; - } + vfree(usbvision->IntraFrameBuffer); + usbvision->IntraFrameBuffer = NULL; + } /************************************************************ diff --git a/linux/drivers/media/video/usbvision/usbvision-video.c b/linux/drivers/media/video/usbvision/usbvision-video.c index d03e5922d..90b58914f 100644 --- a/linux/drivers/media/video/usbvision/usbvision-video.c +++ b/linux/drivers/media/video/usbvision/usbvision-video.c @@ -1794,7 +1794,7 @@ static struct usb_driver usbvision_driver = { .name = "usbvision", .id_table = usbvision_table, .probe = usbvision_probe, - .disconnect = usbvision_disconnect + .disconnect = __devexit_p(usbvision_disconnect), }; /* diff --git a/linux/drivers/media/video/uvc/uvc_ctrl.c b/linux/drivers/media/video/uvc/uvc_ctrl.c index 7774ce6b5..ef55bc35a 100644 --- a/linux/drivers/media/video/uvc/uvc_ctrl.c +++ b/linux/drivers/media/video/uvc/uvc_ctrl.c @@ -1374,21 +1374,19 @@ end: } /* - * Prune an entity of its bogus controls. This currently includes processing - * unit auto controls for which no corresponding manual control is available. - * Such auto controls make little sense if any, and are known to crash at - * least the SiGma Micro webcam. + * Prune an entity of its bogus controls using a blacklist. Bogus controls + * are currently the ones that crash the camera or unconditionally return an + * error when queried. */ static void -uvc_ctrl_prune_entity(struct uvc_entity *entity) +uvc_ctrl_prune_entity(struct uvc_device *dev, struct uvc_entity *entity) { static const struct { - u8 idx_manual; - u8 idx_auto; + struct usb_device_id id; + u8 index; } blacklist[] = { - { 2, 11 }, /* Hue */ - { 6, 12 }, /* White Balance Temperature */ - { 7, 13 }, /* White Balance Component */ + { { USB_DEVICE(0x1c4f, 0x3000) }, 6 }, /* WB Temperature */ + { { USB_DEVICE(0x5986, 0x0241) }, 2 }, /* Hue */ }; u8 *controls; @@ -1402,19 +1400,17 @@ uvc_ctrl_prune_entity(struct uvc_entity *entity) size = entity->processing.bControlSize; for (i = 0; i < ARRAY_SIZE(blacklist); ++i) { - if (blacklist[i].idx_auto >= 8 * size || - blacklist[i].idx_manual >= 8 * size) + if (!usb_match_id(dev->intf, &blacklist[i].id)) continue; - if (!uvc_test_bit(controls, blacklist[i].idx_auto) || - uvc_test_bit(controls, blacklist[i].idx_manual)) + if (blacklist[i].index >= 8 * size || + !uvc_test_bit(controls, blacklist[i].index)) continue; - uvc_trace(UVC_TRACE_CONTROL, "Auto control %u/%u has no " - "matching manual control, removing it.\n", entity->id, - blacklist[i].idx_auto); + uvc_trace(UVC_TRACE_CONTROL, "%u/%u control is black listed, " + "removing it.\n", entity->id, blacklist[i].index); - uvc_clear_bit(controls, blacklist[i].idx_auto); + uvc_clear_bit(controls, blacklist[i].index); } } @@ -1444,8 +1440,7 @@ int uvc_ctrl_init_device(struct uvc_device *dev) bControlSize = entity->camera.bControlSize; } - if (dev->quirks & UVC_QUIRK_PRUNE_CONTROLS) - uvc_ctrl_prune_entity(entity); + uvc_ctrl_prune_entity(dev, entity); for (i = 0; i < bControlSize; ++i) ncontrols += hweight8(bmControls[i]); diff --git a/linux/drivers/media/video/uvc/uvc_driver.c b/linux/drivers/media/video/uvc/uvc_driver.c index 4a69a3af6..40df6828f 100644 --- a/linux/drivers/media/video/uvc/uvc_driver.c +++ b/linux/drivers/media/video/uvc/uvc_driver.c @@ -289,10 +289,8 @@ static int uvc_parse_format(struct uvc_device *dev, struct uvc_format_desc *fmtdesc; struct uvc_frame *frame; const unsigned char *start = buffer; - unsigned char *_buffer; unsigned int interval; unsigned int i, n; - int _buflen; __u8 ftype; format->type = buffer[2]; @@ -303,7 +301,7 @@ static int uvc_parse_format(struct uvc_device *dev, case VS_FORMAT_FRAME_BASED: n = buffer[2] == VS_FORMAT_UNCOMPRESSED ? 27 : 28; if (buflen < n) { - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d FORMAT error\n", dev->udev->devnum, alts->desc.bInterfaceNumber); @@ -338,7 +336,7 @@ static int uvc_parse_format(struct uvc_device *dev, case VS_FORMAT_MJPEG: if (buflen < 11) { - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d FORMAT error\n", dev->udev->devnum, alts->desc.bInterfaceNumber); @@ -354,7 +352,7 @@ static int uvc_parse_format(struct uvc_device *dev, case VS_FORMAT_DV: if (buflen < 9) { - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d FORMAT error\n", dev->udev->devnum, alts->desc.bInterfaceNumber); @@ -372,7 +370,7 @@ static int uvc_parse_format(struct uvc_device *dev, strlcpy(format->name, "HD-DV", sizeof format->name); break; default: - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d: unknown DV format %u\n", dev->udev->devnum, alts->desc.bInterfaceNumber, buffer[8]); @@ -401,7 +399,7 @@ static int uvc_parse_format(struct uvc_device *dev, case VS_FORMAT_STREAM_BASED: /* Not supported yet. */ default: - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d unsupported format %u\n", dev->udev->devnum, alts->desc.bInterfaceNumber, buffer[2]); @@ -413,20 +411,11 @@ static int uvc_parse_format(struct uvc_device *dev, buflen -= buffer[0]; buffer += buffer[0]; - /* Count the number of frame descriptors to test the bFrameIndex - * field when parsing the descriptors. We can't rely on the - * bNumFrameDescriptors field as some cameras don't initialize it - * properly. - */ - for (_buflen = buflen, _buffer = buffer; - _buflen > 2 && _buffer[2] == ftype; - _buflen -= _buffer[0], _buffer += _buffer[0]) - format->nframes++; - /* Parse the frame descriptors. Only uncompressed, MJPEG and frame * based formats have frame descriptors. */ while (buflen > 2 && buffer[2] == ftype) { + frame = &format->frame[format->nframes]; if (ftype != VS_FRAME_FRAME_BASED) n = buflen > 25 ? buffer[25] : 0; else @@ -435,22 +424,12 @@ static int uvc_parse_format(struct uvc_device *dev, n = n ? n : 3; if (buflen < 26 + 4*n) { - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d FRAME error\n", dev->udev->devnum, alts->desc.bInterfaceNumber); return -EINVAL; } - if (buffer[3] - 1 >= format->nframes) { - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" - "interface %d frame index %u out of range\n", - dev->udev->devnum, alts->desc.bInterfaceNumber, - buffer[3]); - return -EINVAL; - } - - frame = &format->frame[buffer[3] - 1]; - frame->bFrameIndex = buffer[3]; frame->bmCapabilities = buffer[4]; frame->wWidth = get_unaligned_le16(&buffer[5]); @@ -507,6 +486,7 @@ static int uvc_parse_format(struct uvc_device *dev, 10000000/frame->dwDefaultFrameInterval, (100000000/frame->dwDefaultFrameInterval)%10); + format->nframes++; buflen -= buffer[0]; buffer += buffer[0]; } @@ -518,7 +498,7 @@ static int uvc_parse_format(struct uvc_device *dev, if (buflen > 2 && buffer[2] == VS_COLORFORMAT) { if (buflen < 6) { - uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " "interface %d COLORFORMAT error\n", dev->udev->devnum, alts->desc.bInterfaceNumber); @@ -664,7 +644,7 @@ static int uvc_parse_streaming(struct uvc_device *dev, _buflen = buflen; /* Count the format and frame descriptors. */ - while (_buflen > 2) { + while (_buflen > 2 && _buffer[1] == CS_INTERFACE) { switch (_buffer[2]) { case VS_FORMAT_UNCOMPRESSED: case VS_FORMAT_MJPEG: @@ -729,7 +709,7 @@ static int uvc_parse_streaming(struct uvc_device *dev, streaming->nformats = nformats; /* Parse the format descriptors. */ - while (buflen > 2) { + while (buflen > 2 && buffer[1] == CS_INTERFACE) { switch (buffer[2]) { case VS_FORMAT_UNCOMPRESSED: case VS_FORMAT_MJPEG: @@ -1316,7 +1296,7 @@ static int uvc_scan_chain_forward(struct uvc_video_device *video, continue; if (forward->extension.bNrInPins != 1) { - uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has" + uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has " "more than 1 input pin.\n", entity->id); return -1; } @@ -1614,6 +1594,7 @@ static int uvc_probe(struct usb_interface *intf, INIT_LIST_HEAD(&dev->entities); INIT_LIST_HEAD(&dev->streaming); kref_init(&dev->kref); + atomic_set(&dev->users, 0); dev->udev = usb_get_dev(udev); dev->intf = usb_get_intf(intf); @@ -1929,7 +1910,7 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_STREAM_NO_FID }, - /* Lenovo Thinkpad SL500 */ + /* Lenovo Thinkpad SL400/SL500 */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = 0x17ef, @@ -1938,6 +1919,15 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_STREAM_NO_FID }, + /* Aveo Technology USB 2.0 Camera */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x1871, + .idProduct = 0x0306, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_EXTRAFIELDS }, /* Ecamm Pico iMage */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, @@ -1947,6 +1937,15 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_EXTRAFIELDS }, + /* FSC WebCam V30S */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x18ec, + .idProduct = 0x3288, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, /* Bodelin ProScopeHR */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_HI @@ -1967,8 +1966,7 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX - | UVC_QUIRK_IGNORE_SELECTOR_UNIT - | UVC_QUIRK_PRUNE_CONTROLS }, + | UVC_QUIRK_IGNORE_SELECTOR_UNIT }, /* Generic USB Video Class */ { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) }, {} diff --git a/linux/drivers/media/video/uvc/uvc_queue.c b/linux/drivers/media/video/uvc/uvc_queue.c index 0155752e4..f854698c4 100644 --- a/linux/drivers/media/video/uvc/uvc_queue.c +++ b/linux/drivers/media/video/uvc/uvc_queue.c @@ -172,6 +172,20 @@ int uvc_free_buffers(struct uvc_video_queue *queue) return 0; } +/* + * Check if buffers have been allocated. + */ +int uvc_queue_allocated(struct uvc_video_queue *queue) +{ + int allocated; + + mutex_lock(&queue->mutex); + allocated = queue->count != 0; + mutex_unlock(&queue->mutex); + + return allocated; +} + static void __uvc_query_buffer(struct uvc_buffer *buf, struct v4l2_buffer *v4l2_buf) { diff --git a/linux/drivers/media/video/uvc/uvc_status.c b/linux/drivers/media/video/uvc/uvc_status.c index 1e1bda413..b05df63b4 100644 --- a/linux/drivers/media/video/uvc/uvc_status.c +++ b/linux/drivers/media/video/uvc/uvc_status.c @@ -206,7 +206,7 @@ int uvc_status_init(struct uvc_device *dev) dev->status, UVC_MAX_STATUS_SIZE, uvc_status_complete, dev, interval); - return usb_submit_urb(dev->int_urb, GFP_KERNEL); + return 0; } void uvc_status_cleanup(struct uvc_device *dev) @@ -217,15 +217,30 @@ void uvc_status_cleanup(struct uvc_device *dev) uvc_input_cleanup(dev); } -int uvc_status_suspend(struct uvc_device *dev) +int uvc_status_start(struct uvc_device *dev) +{ + if (dev->int_urb == NULL) + return 0; + + return usb_submit_urb(dev->int_urb, GFP_KERNEL); +} + +void uvc_status_stop(struct uvc_device *dev) { usb_kill_urb(dev->int_urb); +} + +int uvc_status_suspend(struct uvc_device *dev) +{ + if (atomic_read(&dev->users)) + usb_kill_urb(dev->int_urb); + return 0; } int uvc_status_resume(struct uvc_device *dev) { - if (dev->int_urb == NULL) + if (dev->int_urb == NULL || atomic_read(&dev->users) == 0) return 0; return usb_submit_urb(dev->int_urb, GFP_NOIO); diff --git a/linux/drivers/media/video/uvc/uvc_v4l2.c b/linux/drivers/media/video/uvc/uvc_v4l2.c index bc13dbf05..0be85adf3 100644 --- a/linux/drivers/media/video/uvc/uvc_v4l2.c +++ b/linux/drivers/media/video/uvc/uvc_v4l2.c @@ -251,7 +251,7 @@ static int uvc_v4l2_set_format(struct uvc_video_device *video, if (fmt->type != video->streaming->type) return -EINVAL; - if (uvc_queue_streaming(&video->queue)) + if (uvc_queue_allocated(&video->queue)) return -EBUSY; ret = uvc_v4l2_try_format(video, fmt, &probe, &format, &frame); @@ -443,6 +443,17 @@ static int uvc_v4l2_open(struct file *file) goto done; } + if (atomic_inc_return(&video->dev->users) == 1) { + if ((ret = uvc_status_start(video->dev)) < 0) { +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) + usb_autopm_put_interface(video->dev->intf); +#endif + atomic_dec(&video->dev->users); + kfree(handle); + goto done; + } + } + handle->device = video; handle->state = UVC_HANDLE_PASSIVE; file->private_data = handle; @@ -477,6 +488,9 @@ static int uvc_v4l2_release(struct file *file) kfree(handle); file->private_data = NULL; + if (atomic_dec_return(&video->dev->users) == 0) + uvc_status_stop(video->dev); + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19) usb_autopm_put_interface(video->dev->intf); #endif @@ -524,7 +538,10 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) memset(&xctrl, 0, sizeof xctrl); xctrl.id = ctrl->id; - uvc_ctrl_begin(video); + ret = uvc_ctrl_begin(video); + if (ret < 0) + return ret; + ret = uvc_ctrl_get(video, &xctrl); uvc_ctrl_rollback(video); if (ret >= 0) @@ -541,7 +558,10 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) xctrl.id = ctrl->id; xctrl.value = ctrl->value; - uvc_ctrl_begin(video); + ret = uvc_ctrl_begin(video); + if (ret < 0) + return ret; + ret = uvc_ctrl_set(video, &xctrl); if (ret < 0) { uvc_ctrl_rollback(video); @@ -560,7 +580,10 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) struct v4l2_ext_control *ctrl = ctrls->controls; unsigned int i; - uvc_ctrl_begin(video); + ret = uvc_ctrl_begin(video); + if (ret < 0) + return ret; + for (i = 0; i < ctrls->count; ++ctrl, ++i) { ret = uvc_ctrl_get(video, ctrl); if (ret < 0) { diff --git a/linux/drivers/media/video/uvc/uvc_video.c b/linux/drivers/media/video/uvc/uvc_video.c index c5df33de9..07e755ba7 100644 --- a/linux/drivers/media/video/uvc/uvc_video.c +++ b/linux/drivers/media/video/uvc/uvc_video.c @@ -65,7 +65,8 @@ static void uvc_fixup_video_ctrl(struct uvc_video_device *video, struct uvc_streaming_control *ctrl) { struct uvc_format *format; - struct uvc_frame *frame; + struct uvc_frame *frame = NULL; + unsigned int i; if (ctrl->bFormatIndex <= 0 || ctrl->bFormatIndex > video->streaming->nformats) @@ -73,11 +74,15 @@ static void uvc_fixup_video_ctrl(struct uvc_video_device *video, format = &video->streaming->format[ctrl->bFormatIndex - 1]; - if (ctrl->bFrameIndex <= 0 || - ctrl->bFrameIndex > format->nframes) - return; + for (i = 0; i < format->nframes; ++i) { + if (format->frame[i].bFrameIndex == ctrl->bFrameIndex) { + frame = &format->frame[i]; + break; + } + } - frame = &format->frame[ctrl->bFrameIndex - 1]; + if (frame == NULL) + return; if (!(format->flags & UVC_FMT_FLAG_COMPRESSED) || (ctrl->dwMaxVideoFrameSize == 0 && @@ -1093,7 +1098,7 @@ int uvc_video_init(struct uvc_video_device *video) /* Zero bFrameIndex might be correct. Stream-based formats (including * MPEG-2 TS and DV) do not support frames but have a dummy frame * descriptor with bFrameIndex set to zero. If the default frame - * descriptor is not found, use the first avalable frame. + * descriptor is not found, use the first available frame. */ for (i = format->nframes; i > 0; --i) { frame = &format->frame[i-1]; diff --git a/linux/drivers/media/video/uvc/uvcvideo.h b/linux/drivers/media/video/uvc/uvcvideo.h index 53d5c9e0c..de13c86f2 100644 --- a/linux/drivers/media/video/uvc/uvcvideo.h +++ b/linux/drivers/media/video/uvc/uvcvideo.h @@ -314,7 +314,6 @@ struct uvc_xu_control { #define UVC_QUIRK_BUILTIN_ISIGHT 0x00000008 #define UVC_QUIRK_STREAM_NO_FID 0x00000010 #define UVC_QUIRK_IGNORE_SELECTOR_UNIT 0x00000020 -#define UVC_QUIRK_PRUNE_CONTROLS 0x00000040 #define UVC_QUIRK_FIX_BANDWIDTH 0x00000080 /* Format flags */ @@ -635,6 +634,7 @@ struct uvc_device { enum uvc_device_state state; struct kref kref; struct list_head list; + atomic_t users; /* Video control interface */ __u16 uvc_version; @@ -748,6 +748,7 @@ extern struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf); extern unsigned int uvc_queue_poll(struct uvc_video_queue *queue, struct file *file, poll_table *wait); +extern int uvc_queue_allocated(struct uvc_video_queue *queue); static inline int uvc_queue_streaming(struct uvc_video_queue *queue) { return queue->flags & UVC_QUEUE_STREAMING; @@ -771,6 +772,8 @@ extern int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit, /* Status */ extern int uvc_status_init(struct uvc_device *dev); extern void uvc_status_cleanup(struct uvc_device *dev); +extern int uvc_status_start(struct uvc_device *dev); +extern void uvc_status_stop(struct uvc_device *dev); extern int uvc_status_suspend(struct uvc_device *dev); extern int uvc_status_resume(struct uvc_device *dev); diff --git a/linux/drivers/media/video/v4l2-common.c b/linux/drivers/media/video/v4l2-common.c index 8f2db1250..f94b5d92a 100644 --- a/linux/drivers/media/video/v4l2-common.c +++ b/linux/drivers/media/video/v4l2-common.c @@ -997,4 +997,78 @@ const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type) } EXPORT_SYMBOL_GPL(v4l2_i2c_tuner_addrs); -#endif +#endif /* defined(CONFIG_I2C) */ + +/* Clamp x to be between min and max, aligned to a multiple of 2^align. min + * and max don't have to be aligned, but there must be at least one valid + * value. E.g., min=17,max=31,align=4 is not allowed as there are no multiples + * of 16 between 17 and 31. */ +static unsigned int clamp_align(unsigned int x, unsigned int min, + unsigned int max, unsigned int align) +{ + /* Bits that must be zero to be aligned */ + unsigned int mask = ~((1 << align) - 1); + + /* Round to nearest aligned value */ + if (align) + x = (x + (1 << (align - 1))) & mask; + + /* Clamp to aligned value of min and max */ + if (x < min) + x = (min + ~mask) & mask; + else if (x > max) + x = max & mask; + + return x; +} + +/* Bound an image to have a width between wmin and wmax, and height between + * hmin and hmax, inclusive. Additionally, the width will be a multiple of + * 2^walign, the height will be a multiple of 2^halign, and the overall size + * (width*height) will be a multiple of 2^salign. The image may be shrunk + * or enlarged to fit the alignment constraints. + * + * The width or height maximum must not be smaller than the corresponding + * minimum. The alignments must not be so high there are no possible image + * sizes within the allowed bounds. wmin and hmin must be at least 1 + * (don't use 0). If you don't care about a certain alignment, specify 0, + * as 2^0 is 1 and one byte alignment is equivalent to no alignment. If + * you only want to adjust downward, specify a maximum that's the same as + * the initial value. + */ +void v4l_bound_align_image(u32 *w, unsigned int wmin, unsigned int wmax, + unsigned int walign, + u32 *h, unsigned int hmin, unsigned int hmax, + unsigned int halign, unsigned int salign) +{ + *w = clamp_align(*w, wmin, wmax, walign); + *h = clamp_align(*h, hmin, hmax, halign); + + /* Usually we don't need to align the size and are done now. */ + if (!salign) + return; + + /* How much alignment do we have? */ + walign = __ffs(*w); + halign = __ffs(*h); + /* Enough to satisfy the image alignment? */ + if (walign + halign < salign) { + /* Max walign where there is still a valid width */ + unsigned int wmaxa = __fls(wmax ^ (wmin - 1)); + /* Max halign where there is still a valid height */ + unsigned int hmaxa = __fls(hmax ^ (hmin - 1)); + + /* up the smaller alignment until we have enough */ + do { + if (halign >= hmaxa || + (walign <= halign && walign < wmaxa)) { + *w = clamp_align(*w, wmin, wmax, walign + 1); + walign = __ffs(*w); + } else { + *h = clamp_align(*h, hmin, hmax, halign + 1); + halign = __ffs(*h); + } + } while (halign + walign < salign); + } +} +EXPORT_SYMBOL_GPL(v4l_bound_align_image); diff --git a/linux/drivers/media/video/v4l2-device.c b/linux/drivers/media/video/v4l2-device.c index b962862fe..4fa93189d 100644 --- a/linux/drivers/media/video/v4l2-device.c +++ b/linux/drivers/media/video/v4l2-device.c @@ -86,7 +86,8 @@ void v4l2_device_unregister(struct v4l2_device *v4l2_dev) /* Unregister subdevs */ list_for_each_entry_safe(sd, next, &v4l2_dev->subdevs, list) { v4l2_device_unregister_subdev(sd); -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE)) +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 29) if (sd->flags & V4L2_SUBDEV_FL_IS_I2C) { struct i2c_client *client = v4l2_get_subdevdata(sd); @@ -98,6 +99,7 @@ void v4l2_device_unregister(struct v4l2_device *v4l2_dev) i2c_unregister_device(client); } #endif +#endif } } EXPORT_SYMBOL_GPL(v4l2_device_unregister); diff --git a/linux/drivers/media/video/videobuf-core.c b/linux/drivers/media/video/videobuf-core.c index e9696385d..faf912403 100644 --- a/linux/drivers/media/video/videobuf-core.c +++ b/linux/drivers/media/video/videobuf-core.c @@ -119,6 +119,7 @@ void videobuf_queue_core_init(struct videobuf_queue *q, void *priv, struct videobuf_qtype_ops *int_ops) { + BUG_ON(!q); memset(q, 0, sizeof(*q)); q->irqlock = irqlock; q->dev = dev; diff --git a/linux/drivers/media/video/videobuf-dma-sg.c b/linux/drivers/media/video/videobuf-dma-sg.c index ed38145e1..da83ac706 100644 --- a/linux/drivers/media/video/videobuf-dma-sg.c +++ b/linux/drivers/media/video/videobuf-dma-sg.c @@ -59,9 +59,10 @@ videobuf_vmalloc_to_sg(unsigned char *virt, int nr_pages) struct page *pg; int i; - sglist = kcalloc(nr_pages, sizeof(struct scatterlist), GFP_KERNEL); + sglist = vmalloc(nr_pages * sizeof(*sglist)); if (NULL == sglist) return NULL; + memset(sglist, 0, nr_pages * sizeof(*sglist)); sg_init_table(sglist, nr_pages); for (i = 0; i < nr_pages; i++, virt += PAGE_SIZE) { pg = vmalloc_to_page(virt); @@ -73,7 +74,7 @@ videobuf_vmalloc_to_sg(unsigned char *virt, int nr_pages) return sglist; err: - kfree(sglist); + vfree(sglist); return NULL; } @@ -85,7 +86,7 @@ videobuf_pages_to_sg(struct page **pages, int nr_pages, int offset) if (NULL == pages[0]) return NULL; - sglist = kmalloc(nr_pages * sizeof(*sglist), GFP_KERNEL); + sglist = vmalloc(nr_pages * sizeof(*sglist)); if (NULL == sglist) return NULL; sg_init_table(sglist, nr_pages); @@ -105,12 +106,12 @@ videobuf_pages_to_sg(struct page **pages, int nr_pages, int offset) nopage: dprintk(2,"sgl: oops - no page\n"); - kfree(sglist); + vfree(sglist); return NULL; highmem: dprintk(2,"sgl: oops - highmem page\n"); - kfree(sglist); + vfree(sglist); return NULL; } @@ -231,7 +232,7 @@ int videobuf_dma_map(struct videobuf_queue* q, struct videobuf_dmabuf *dma) (dma->vmalloc,dma->nr_pages); } if (dma->bus_addr) { - dma->sglist = kmalloc(sizeof(struct scatterlist), GFP_KERNEL); + dma->sglist = vmalloc(sizeof(*dma->sglist)); if (NULL != dma->sglist) { dma->sglen = 1; sg_dma_address(&dma->sglist[0]) = dma->bus_addr & PAGE_MASK; @@ -249,10 +250,10 @@ int videobuf_dma_map(struct videobuf_queue* q, struct videobuf_dmabuf *dma) if (0 == dma->sglen) { printk(KERN_WARNING "%s: videobuf_map_sg failed\n",__func__); - kfree(dma->sglist); + vfree(dma->sglist); dma->sglist = NULL; dma->sglen = 0; - return -EIO; + return -ENOMEM; } } return 0; @@ -275,7 +276,7 @@ int videobuf_dma_unmap(struct videobuf_queue* q,struct videobuf_dmabuf *dma) dma_unmap_sg(q->dev, dma->sglist, dma->nr_pages, dma->direction); - kfree(dma->sglist); + vfree(dma->sglist); dma->sglist = NULL; dma->sglen = 0; return 0; diff --git a/linux/drivers/media/video/vino.c b/linux/drivers/media/video/vino.c index 808d9434d..7c39b43ee 100644 --- a/linux/drivers/media/video/vino.c +++ b/linux/drivers/media/video/vino.c @@ -868,9 +868,9 @@ static void vino_sync_buffer(struct vino_framebuffer *fb) dprintk("vino_sync_buffer():\n"); for (i = 0; i < fb->desc_table.page_count; i++) - dma_sync_single(NULL, - fb->desc_table.dma_cpu[VINO_PAGE_RATIO * i], - PAGE_SIZE, DMA_FROM_DEVICE); + dma_sync_single_for_cpu(NULL, + fb->desc_table.dma_cpu[VINO_PAGE_RATIO * i], + PAGE_SIZE, DMA_FROM_DEVICE); } /* Framebuffer fifo functions (need to be locked externally) */ diff --git a/linux/drivers/media/video/vivi.c b/linux/drivers/media/video/vivi.c index e3bc2b0a3..fe39b7326 100644 --- a/linux/drivers/media/video/vivi.c +++ b/linux/drivers/media/video/vivi.c @@ -886,15 +886,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, maxh = norm_maxh(); f->fmt.pix.field = field; - if (f->fmt.pix.height < 32) - f->fmt.pix.height = 32; - if (f->fmt.pix.height > maxh) - f->fmt.pix.height = maxh; - if (f->fmt.pix.width < 48) - f->fmt.pix.width = 48; - if (f->fmt.pix.width > maxw) - f->fmt.pix.width = maxw; - f->fmt.pix.width &= ~0x03; + v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2, + &f->fmt.pix.height, 32, maxh, 0, 0); f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3; f->fmt.pix.sizeimage = diff --git a/linux/drivers/media/video/w9968cf.c b/linux/drivers/media/video/w9968cf.c index d51566ddc..86738d186 100644 --- a/linux/drivers/media/video/w9968cf.c +++ b/linux/drivers/media/video/w9968cf.c @@ -464,7 +464,7 @@ static int w9968cf_set_picture(struct w9968cf_device*, struct video_picture); static int w9968cf_set_window(struct w9968cf_device*, struct video_window); static int w9968cf_postprocess_frame(struct w9968cf_device*, struct w9968cf_frame_t*); -static int w9968cf_adjust_window_size(struct w9968cf_device*, u16* w, u16* h); +static int w9968cf_adjust_window_size(struct w9968cf_device*, u32 *w, u32 *h); static void w9968cf_init_framelist(struct w9968cf_device*); static void w9968cf_push_frame(struct w9968cf_device*, u8 f_num); static void w9968cf_pop_frame(struct w9968cf_device*,struct w9968cf_frame_t**); @@ -1777,8 +1777,7 @@ w9968cf_set_window(struct w9968cf_device* cam, struct video_window win) #define UNSC(x) ((x) >> 10) /* Make sure we are using a supported resolution */ - if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width, - (u16*)&win.height))) + if ((err = w9968cf_adjust_window_size(cam, &win.width, &win.height))) goto error; /* Scaling factors */ @@ -1928,12 +1927,9 @@ error: Return 0 on success, -1 otherwise. --------------------------------------------------------------------------*/ static int -w9968cf_adjust_window_size(struct w9968cf_device* cam, u16* width, u16* height) +w9968cf_adjust_window_size(struct w9968cf_device *cam, u32 *width, u32 *height) { - u16 maxw, maxh; - - if ((*width < cam->minwidth) || (*height < cam->minheight)) - return -ERANGE; + unsigned int maxw, maxh, align; maxw = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) && w9968cf_vpp ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth) @@ -1941,16 +1937,10 @@ w9968cf_adjust_window_size(struct w9968cf_device* cam, u16* width, u16* height) maxh = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) && w9968cf_vpp ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight) : cam->maxheight; + align = (cam->vpp_flag & VPP_DECOMPRESSION) ? 4 : 0; - if (*width > maxw) - *width = maxw; - if (*height > maxh) - *height = maxh; - - if (cam->vpp_flag & VPP_DECOMPRESSION) { - *width &= ~15L; /* multiple of 16 */ - *height &= ~15L; - } + v4l_bound_align_image(width, cam->minwidth, maxw, align, + height, cam->minheight, maxh, align, 0); PDBGG("Window size adjusted w=%u, h=%u ", *width, *height) @@ -3057,8 +3047,8 @@ static long w9968cf_v4l_ioctl(struct file *filp, if (win.clipcount != 0 || win.flags != 0) return -EINVAL; - if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width, - (u16*)&win.height))) { + if ((err = w9968cf_adjust_window_size(cam, &win.width, + &win.height))) { DBG(4, "Resolution not supported (%ux%u). " "VIDIOCSWIN failed", win.width, win.height) return err; @@ -3130,6 +3120,7 @@ static long w9968cf_v4l_ioctl(struct file *filp, { struct video_mmap mmap; struct w9968cf_frame_t* fr; + u32 w, h; int err = 0; if (copy_from_user(&mmap, arg, sizeof(mmap))) @@ -3178,8 +3169,10 @@ static long w9968cf_v4l_ioctl(struct file *filp, } } - if ((err = w9968cf_adjust_window_size(cam, (u16*)&mmap.width, - (u16*)&mmap.height))) { + w = mmap.width; h = mmap.height; + err = w9968cf_adjust_window_size(cam, &w, &h); + mmap.width = w; mmap.height = h; + if (err) { DBG(4, "Resolution not supported (%dx%d). " "VIDIOCMCAPTURE failed", mmap.width, mmap.height) diff --git a/linux/drivers/media/video/zoran/zoran_card.c b/linux/drivers/media/video/zoran/zoran_card.c index 67ab10878..85f63116d 100644 --- a/linux/drivers/media/video/zoran/zoran_card.c +++ b/linux/drivers/media/video/zoran/zoran_card.c @@ -1478,7 +1478,7 @@ static struct pci_driver zoran_driver = { .name = "zr36067", .id_table = zr36067_pci_tbl, .probe = zoran_probe, - .remove = zoran_remove, + .remove = __devexit_p(zoran_remove), }; static int __init zoran_init(void) diff --git a/linux/drivers/media/video/zoran/zoran_driver.c b/linux/drivers/media/video/zoran/zoran_driver.c index 793395074..8c17d47b3 100644 --- a/linux/drivers/media/video/zoran/zoran_driver.c +++ b/linux/drivers/media/video/zoran/zoran_driver.c @@ -2096,16 +2096,10 @@ static int zoran_try_fmt_vid_cap(struct file *file, void *__fh, return -EINVAL; } - bpp = (zoran_formats[i].depth + 7) / 8; - fmt->fmt.pix.width &= ~((bpp == 2) ? 1 : 3); - if (fmt->fmt.pix.width > BUZ_MAX_WIDTH) - fmt->fmt.pix.width = BUZ_MAX_WIDTH; - if (fmt->fmt.pix.width < BUZ_MIN_WIDTH) - fmt->fmt.pix.width = BUZ_MIN_WIDTH; - if (fmt->fmt.pix.height > BUZ_MAX_HEIGHT) - fmt->fmt.pix.height = BUZ_MAX_HEIGHT; - if (fmt->fmt.pix.height < BUZ_MIN_HEIGHT) - fmt->fmt.pix.height = BUZ_MIN_HEIGHT; + bpp = DIV_ROUND_UP(zoran_formats[i].depth, 8); + v4l_bound_align_image( + &fmt->fmt.pix.width, BUZ_MIN_WIDTH, BUZ_MAX_WIDTH, bpp == 2 ? 1 : 2, + &fmt->fmt.pix.height, BUZ_MIN_HEIGHT, BUZ_MAX_HEIGHT, 0, 0); mutex_unlock(&zr->resource_lock); return 0; diff --git a/linux/drivers/media/video/zr364xx.c b/linux/drivers/media/video/zr364xx.c index b8f47acab..8746f067d 100644 --- a/linux/drivers/media/video/zr364xx.c +++ b/linux/drivers/media/video/zr364xx.c @@ -883,9 +883,11 @@ static void zr364xx_disconnect(struct usb_interface *intf) video_unregister_device(cam->vdev); cam->vdev = NULL; kfree(cam->buffer); - if (cam->framebuf) - vfree(cam->framebuf); + cam->buffer = NULL; + vfree(cam->framebuf); + cam->framebuf = NULL; kfree(cam); + cam = NULL; } |