diff options
Diffstat (limited to 'linux')
34 files changed, 5932 insertions, 44 deletions
diff --git a/linux/Documentation/Docbook/Makefile b/linux/Documentation/Docbook/Makefile new file mode 100644 index 000000000..ad07875fe --- /dev/null +++ b/linux/Documentation/Docbook/Makefile @@ -0,0 +1,248 @@ +### +# This makefile is used to generate the kernel documentation, +# primarily based on in-line comments in various source files. +# See Documentation/kernel-doc-nano-HOWTO.txt for instruction in how +# to document the SRC - and how to read it. +# To add a new book the only step required is to add the book to the +# list of DOCBOOKS. + +DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \ + kernel-hacking.xml kernel-locking.xml deviceiobook.xml \ + procfs-guide.xml writing_usb_driver.xml networking.xml \ + kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \ + gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ + genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ + mac80211.xml debugobjects.xml sh.xml regulator.xml \ + alsa-driver-api.xml writing-an-alsa-driver.xml \ + tracepoint.xml media.xml + +### +# The build process is as follows (targets): +# (xmldocs) [by docproc] +# file.tmpl --> file.xml +--> file.ps (psdocs) [by db2ps or xmlto] +# +--> file.pdf (pdfdocs) [by db2pdf or xmlto] +# +--> DIR=file (htmldocs) [by xmlto] +# +--> man/ (mandocs) [by xmlto] + + +# for PDF and PS output you can choose between xmlto and docbook-utils tools +PDF_METHOD = $(prefer-db2x) +PS_METHOD = $(prefer-db2x) + + +### +# The targets that may be used. +PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs + +BOOKS := $(addprefix $(obj)/,$(DOCBOOKS)) +xmldocs: $(BOOKS) +sgmldocs: xmldocs + +PS := $(patsubst %.xml, %.ps, $(BOOKS)) +psdocs: $(PS) + +PDF := $(patsubst %.xml, %.pdf, $(BOOKS)) +pdfdocs: $(PDF) + +HTML := $(sort $(patsubst %.xml, %.html, $(BOOKS))) +htmldocs: $(HTML) + $(call build_main_index) + +MAN := $(patsubst %.xml, %.9, $(BOOKS)) +mandocs: $(MAN) + +installmandocs: mandocs + mkdir -p /usr/local/man/man9/ + install Documentation/DocBook/man/*.9.gz /usr/local/man/man9/ + +### +#External programs used +KERNELDOC = $(srctree)/scripts/kernel-doc +DOCPROC = $(objtree)/scripts/basic/docproc + +XMLTOFLAGS = -m $(srctree)/Documentation/DocBook/stylesheet.xsl +#XMLTOFLAGS += --skip-validation + +### +# DOCPROC is used for two purposes: +# 1) To generate a dependency list for a .tmpl file +# 2) To preprocess a .tmpl file and call kernel-doc with +# appropriate parameters. +# The following rules are used to generate the .xml documentation +# required to generate the final targets. (ps, pdf, html). +quiet_cmd_docproc = DOCPROC $@ + cmd_docproc = SRCTREE=$(srctree)/ $(DOCPROC) doc $< >$@ +define rule_docproc + set -e; \ + $(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))';) \ + $(cmd_$(1)); \ + ( \ + echo 'cmd_$@ := $(cmd_$(1))'; \ + echo $@: `SRCTREE=$(srctree) $(DOCPROC) depend $<`; \ + ) > $(dir $@).$(notdir $@).cmd +endef + +%.xml: %.tmpl FORCE + $(call if_changed_rule,docproc) + +### +#Read in all saved dependency files +cmd_files := $(wildcard $(foreach f,$(BOOKS),$(dir $(f)).$(notdir $(f)).cmd)) + +ifneq ($(cmd_files),) + include $(cmd_files) +endif + +### +# Changes in kernel-doc force a rebuild of all documentation +$(BOOKS): $(KERNELDOC) + +### +# procfs guide uses a .c file as example code. +# This requires an explicit dependency +C-procfs-example = procfs_example.xml +C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example)) +$(obj)/procfs-guide.xml: $(C-procfs-example2) + +# List of programs to build +##oops, this is a kernel module::hostprogs-y := procfs_example +obj-m += procfs_example.o + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +notfoundtemplate = echo "*** You have to install docbook-utils or xmlto ***"; \ + exit 1 +db2xtemplate = db2TYPE -o $(dir $@) $< +xmltotemplate = xmlto TYPE $(XMLTOFLAGS) -o $(dir $@) $< + +# determine which methods are available +ifeq ($(shell which db2ps >/dev/null 2>&1 && echo found),found) + use-db2x = db2x + prefer-db2x = db2x +else + use-db2x = notfound + prefer-db2x = $(use-xmlto) +endif +ifeq ($(shell which xmlto >/dev/null 2>&1 && echo found),found) + use-xmlto = xmlto + prefer-xmlto = xmlto +else + use-xmlto = notfound + prefer-xmlto = $(use-db2x) +endif + +# the commands, generated from the chosen template +quiet_cmd_db2ps = PS $@ + cmd_db2ps = $(subst TYPE,ps, $($(PS_METHOD)template)) +%.ps : %.xml + $(call cmd,db2ps) + +quiet_cmd_db2pdf = PDF $@ + cmd_db2pdf = $(subst TYPE,pdf, $($(PDF_METHOD)template)) +%.pdf : %.xml + $(call cmd,db2pdf) + + +index = index.html +main_idx = Documentation/DocBook/$(index) +build_main_index = rm -rf $(main_idx) && \ + echo '<h1>Linux Kernel HTML Documentation</h1>' >> $(main_idx) && \ + echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \ + cat $(HTML) >> $(main_idx) + +quiet_cmd_db2html = HTML $@ + cmd_db2html = xmlto xhtml $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \ + echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/index.html"> \ + $(patsubst %.html,%,$(notdir $@))</a><p>' > $@ + +%.html: %.xml + @(which xmlto > /dev/null 2>&1) || \ + (echo "*** You need to install xmlto ***"; \ + exit 1) + @rm -rf $@ $(patsubst %.html,%,$@) + $(call cmd,db2html) + @if [ ! -z "$(PNG-$(basename $(notdir $@)))" ]; then \ + cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi + +quiet_cmd_db2man = MAN $@ + cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; gzip -f $(obj)/man/*.9; fi +%.9 : %.xml + @(which xmlto > /dev/null 2>&1) || \ + (echo "*** You need to install xmlto ***"; \ + exit 1) + $(Q)mkdir -p $(obj)/man + $(call cmd,db2man) + @touch $@ + +### +# Rules to generate postscripts and PNG images from .fig format files +quiet_cmd_fig2eps = FIG2EPS $@ + cmd_fig2eps = fig2dev -Leps $< $@ + +%.eps: %.fig + @(which fig2dev > /dev/null 2>&1) || \ + (echo "*** You need to install transfig ***"; \ + exit 1) + $(call cmd,fig2eps) + +quiet_cmd_fig2png = FIG2PNG $@ + cmd_fig2png = fig2dev -Lpng $< $@ + +%.png: %.fig + @(which fig2dev > /dev/null 2>&1) || \ + (echo "*** You need to install transfig ***"; \ + exit 1) + $(call cmd,fig2png) + +### +# Rule to convert a .c file to inline XML documentation + gen_xml = : + quiet_gen_xml = echo ' GEN $@' +silent_gen_xml = : +%.xml: %.c + @$($(quiet)gen_xml) + @( \ + echo "<programlisting>"; \ + expand --tabs=8 < $< | \ + sed -e "s/&/\\&/g" \ + -e "s/</\\</g" \ + -e "s/>/\\>/g"; \ + echo "</programlisting>") > $@ + +### +# Help targets as used by the top-level makefile +dochelp: + @echo ' Linux kernel internal documentation in different formats:' + @echo ' htmldocs - HTML' + @echo ' pdfdocs - PDF' + @echo ' psdocs - Postscript' + @echo ' xmldocs - XML DocBook' + @echo ' mandocs - man pages' + @echo ' installmandocs - install man pages generated by mandocs' + @echo ' cleandocs - clean all generated DocBook files' + +### +# Temporary files left by various tools +clean-files := $(DOCBOOKS) \ + $(patsubst %.xml, %.dvi, $(DOCBOOKS)) \ + $(patsubst %.xml, %.aux, $(DOCBOOKS)) \ + $(patsubst %.xml, %.tex, $(DOCBOOKS)) \ + $(patsubst %.xml, %.log, $(DOCBOOKS)) \ + $(patsubst %.xml, %.out, $(DOCBOOKS)) \ + $(patsubst %.xml, %.ps, $(DOCBOOKS)) \ + $(patsubst %.xml, %.pdf, $(DOCBOOKS)) \ + $(patsubst %.xml, %.html, $(DOCBOOKS)) \ + $(patsubst %.xml, %.9, $(DOCBOOKS)) \ + $(C-procfs-example) $(index) + +clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man + +cleandocs: + $(Q)rm -f $(call objectify, $(clean-files)) + $(Q)rm -rf $(call objectify, $(clean-dirs)) + +# Declare the contents of the .PHONY variable as phony. We keep that +# information in a variable se we can use it in if_changed and friends. + +.PHONY: $(PHONY) diff --git a/linux/drivers/media/common/tuners/tda18271-common.c b/linux/drivers/media/common/tuners/tda18271-common.c index a49facb7b..4092bcf01 100644 --- a/linux/drivers/media/common/tuners/tda18271-common.c +++ b/linux/drivers/media/common/tuners/tda18271-common.c @@ -210,7 +210,8 @@ int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) tda18271_i2c_gate_ctrl(fe, 0); if (ret != 1) - tda_err("ERROR: i2c_transfer returned: %d\n", ret); + tda_err("ERROR: idx = 0x%x, len = %d, " + "i2c_transfer returned: %d\n", idx, len, ret); return (ret == 1 ? 0 : ret); } diff --git a/linux/drivers/media/common/tuners/tda18271-fe.c b/linux/drivers/media/common/tuners/tda18271-fe.c index 6c71b0a16..a3e122c89 100644 --- a/linux/drivers/media/common/tuners/tda18271-fe.c +++ b/linux/drivers/media/common/tuners/tda18271-fe.c @@ -37,6 +37,27 @@ static LIST_HEAD(hybrid_tuner_instance_list); /*---------------------------------------------------------------------*/ +static int tda18271_toggle_output(struct dvb_frontend *fe, int standby) +{ + struct tda18271_priv *priv = fe->tuner_priv; + + int ret = tda18271_set_standby_mode(fe, standby ? 1 : 0, + priv->output_opt & TDA18271_OUTPUT_LT_OFF ? 1 : 0, + priv->output_opt & TDA18271_OUTPUT_XT_OFF ? 1 : 0); + + if (tda_fail(ret)) + goto fail; + + tda_dbg("%s mode: xtal oscillator %s, slave tuner loop thru %s\n", + standby ? "standby" : "active", + priv->output_opt & TDA18271_OUTPUT_XT_OFF ? "off" : "on", + priv->output_opt & TDA18271_OUTPUT_LT_OFF ? "off" : "on"); +fail: + return ret; +} + +/*---------------------------------------------------------------------*/ + static inline int charge_pump_source(struct dvb_frontend *fe, int force) { struct tda18271_priv *priv = fe->tuner_priv; @@ -272,7 +293,7 @@ static int tda18271c2_rf_tracking_filters_correction(struct dvb_frontend *fe, tda18271_lookup_map(fe, RF_CAL_DC_OVER_DT, &freq, &dc_over_dt); /* calculate temperature compensation */ - rfcal_comp = dc_over_dt * (tm_current - priv->tm_rfcal); + rfcal_comp = dc_over_dt * (tm_current - priv->tm_rfcal) / 1000; regs[R_EB14] = approx + rfcal_comp; ret = tda18271_write_regs(fe, R_EB14, 1); @@ -801,7 +822,7 @@ static int tda18271_init(struct dvb_frontend *fe) mutex_lock(&priv->lock); - /* power up */ + /* full power up */ ret = tda18271_set_standby_mode(fe, 0, 0, 0); if (tda_fail(ret)) goto fail; @@ -819,6 +840,21 @@ fail: return ret; } +static int tda18271_sleep(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + int ret; + + mutex_lock(&priv->lock); + + /* enter standby mode, with required output features enabled */ + ret = tda18271_toggle_output(fe, 1); + + mutex_unlock(&priv->lock); + + return ret; +} + /* ------------------------------------------------------------------ */ static int tda18271_agc(struct dvb_frontend *fe) @@ -828,8 +864,9 @@ static int tda18271_agc(struct dvb_frontend *fe) switch (priv->config) { case 0: - /* no LNA */ - tda_dbg("no agc configuration provided\n"); + /* no external agc configuration required */ + if (tda18271_debug & DBG_ADV) + tda_dbg("no agc configuration provided\n"); break; case 3: /* switch with GPIO of saa713x */ @@ -1011,22 +1048,6 @@ fail: return ret; } -static int tda18271_sleep(struct dvb_frontend *fe) -{ - struct tda18271_priv *priv = fe->tuner_priv; - int ret; - - mutex_lock(&priv->lock); - - /* standby mode w/ slave tuner output - * & loop thru & xtal oscillator on */ - ret = tda18271_set_standby_mode(fe, 1, 0, 0); - - mutex_unlock(&priv->lock); - - return ret; -} - static int tda18271_release(struct dvb_frontend *fe) { struct tda18271_priv *priv = fe->tuner_priv; @@ -1200,6 +1221,9 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, priv->gate = (cfg) ? cfg->gate : TDA18271_GATE_AUTO; priv->role = (cfg) ? cfg->role : TDA18271_MASTER; priv->config = (cfg) ? cfg->config : 0; + priv->small_i2c = (cfg) ? cfg->small_i2c : 0; + priv->output_opt = (cfg) ? + cfg->output_opt : TDA18271_OUTPUT_LT_XT_ON; /* tda18271_cal_on_startup == -1 when cal * module option is unset */ @@ -1217,9 +1241,6 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, fe->tuner_priv = priv; - if (cfg) - priv->small_i2c = cfg->small_i2c; - if (tda_fail(tda18271_get_id(fe))) goto fail; @@ -1239,9 +1260,19 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, /* existing tuner instance */ fe->tuner_priv = priv; - /* allow dvb driver to override i2c gate setting */ - if ((cfg) && (cfg->gate != TDA18271_GATE_ANALOG)) - priv->gate = cfg->gate; + /* allow dvb driver to override configuration settings */ + if (cfg) { + if (cfg->gate != TDA18271_GATE_ANALOG) + priv->gate = cfg->gate; + if (cfg->role) + priv->role = cfg->role; + if (cfg->config) + priv->config = cfg->config; + if (cfg->small_i2c) + priv->small_i2c = cfg->small_i2c; + if (cfg->output_opt) + priv->output_opt = cfg->output_opt; + } break; } diff --git a/linux/drivers/media/common/tuners/tda18271-maps.c b/linux/drivers/media/common/tuners/tda18271-maps.c index ab14ceb9e..e21fdeff3 100644 --- a/linux/drivers/media/common/tuners/tda18271-maps.c +++ b/linux/drivers/media/common/tuners/tda18271-maps.c @@ -962,10 +962,9 @@ struct tda18271_cid_target_map { static struct tda18271_cid_target_map tda18271_cid_target[] = { { .rfmax = 46000, .target = 0x04, .limit = 1800 }, { .rfmax = 52200, .target = 0x0a, .limit = 1500 }, - { .rfmax = 79100, .target = 0x01, .limit = 4000 }, + { .rfmax = 70100, .target = 0x01, .limit = 4000 }, { .rfmax = 136800, .target = 0x18, .limit = 4000 }, { .rfmax = 156700, .target = 0x18, .limit = 4000 }, - { .rfmax = 156700, .target = 0x18, .limit = 4000 }, { .rfmax = 186250, .target = 0x0a, .limit = 4000 }, { .rfmax = 230000, .target = 0x0a, .limit = 4000 }, { .rfmax = 345000, .target = 0x18, .limit = 4000 }, diff --git a/linux/drivers/media/common/tuners/tda18271-priv.h b/linux/drivers/media/common/tuners/tda18271-priv.h index e6aa1f47f..11dbc0b33 100644 --- a/linux/drivers/media/common/tuners/tda18271-priv.h +++ b/linux/drivers/media/common/tuners/tda18271-priv.h @@ -109,6 +109,7 @@ struct tda18271_priv { enum tda18271_role role; enum tda18271_i2c_gate gate; enum tda18271_ver id; + enum tda18271_output_options output_opt; unsigned int config; /* interface to saa713x / tda829x */ unsigned int tm_rfcal; diff --git a/linux/drivers/media/common/tuners/tda18271.h b/linux/drivers/media/common/tuners/tda18271.h index 71bac9593..323f29121 100644 --- a/linux/drivers/media/common/tuners/tda18271.h +++ b/linux/drivers/media/common/tuners/tda18271.h @@ -67,6 +67,17 @@ enum tda18271_i2c_gate { TDA18271_GATE_DIGITAL, }; +enum tda18271_output_options { + /* slave tuner output & loop thru & xtal oscillator always on */ + TDA18271_OUTPUT_LT_XT_ON = 0, + + /* slave tuner output loop thru off */ + TDA18271_OUTPUT_LT_OFF = 1, + + /* xtal oscillator off */ + TDA18271_OUTPUT_XT_OFF = 2, +}; + struct tda18271_config { /* override default if freq / std settings (optional) */ struct tda18271_std_map *std_map; @@ -77,6 +88,9 @@ struct tda18271_config { /* use i2c gate provided by analog or digital demod */ enum tda18271_i2c_gate gate; + /* output options that can be disabled */ + enum tda18271_output_options output_opt; + /* force rf tracking filter calibration on startup */ unsigned int rf_cal_on_startup:1; diff --git a/linux/drivers/media/common/tuners/tuner-xc2028.c b/linux/drivers/media/common/tuners/tuner-xc2028.c index 3cf380e6b..4d31767a6 100644 --- a/linux/drivers/media/common/tuners/tuner-xc2028.c +++ b/linux/drivers/media/common/tuners/tuner-xc2028.c @@ -103,6 +103,7 @@ struct xc2028_data { if (size != _rc) \ tuner_info("i2c output error: rc = %d (should be %d)\n",\ _rc, (int)size); \ + msleep(priv->ctrl.msleep); \ _rc; \ }) @@ -122,6 +123,7 @@ struct xc2028_data { if (isize != _rc) \ tuner_err("i2c input error: rc = %d (should be %d)\n", \ _rc, (int)isize); \ + msleep(priv->ctrl.msleep); \ _rc; \ }) @@ -133,7 +135,7 @@ struct xc2028_data { _val, sizeof(_val)))) { \ tuner_err("Error on line %d: %d\n", __LINE__, _rc); \ } else \ - msleep(10); \ + msleep(priv->ctrl.msleep); \ _rc; \ }) @@ -812,10 +814,20 @@ check_device: hwmodel, (version & 0xf000) >> 12, (version & 0xf00) >> 8, (version & 0xf0) >> 4, version & 0xf); + + if (priv->ctrl.read_not_reliable) + goto read_not_reliable; + /* Check firmware version against what we downloaded. */ if (priv->firm_version != ((version & 0xf0) << 4 | (version & 0x0f))) { - tuner_err("Incorrect readback of firmware version.\n"); - goto fail; + if (!priv->ctrl.read_not_reliable) { + tuner_err("Incorrect readback of firmware version.\n"); + goto fail; + } else { + tuner_err("Returned an incorrect version. However, " + "read is not reliable enough. Ignoring it.\n"); + hwmodel = 3028; + } } /* Check that the tuner hardware model remains consistent over time. */ @@ -829,6 +841,7 @@ check_device: goto fail; } +read_not_reliable: memcpy(&priv->cur_fw, &new_fw, sizeof(priv->cur_fw)); /* @@ -961,6 +974,7 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */, The reset CLK is needed only with tm6000. Driver should work fine even if this fails. */ + msleep(priv->ctrl.msleep); do_tuner_callback(fe, XC2028_RESET_CLK, 1); msleep(10); diff --git a/linux/drivers/media/common/tuners/tuner-xc2028.h b/linux/drivers/media/common/tuners/tuner-xc2028.h index a90c35d50..9778c96a5 100644 --- a/linux/drivers/media/common/tuners/tuner-xc2028.h +++ b/linux/drivers/media/common/tuners/tuner-xc2028.h @@ -33,12 +33,14 @@ enum firmware_type { struct xc2028_ctrl { char *fname; int max_len; + int msleep; unsigned int scode_table; unsigned int mts :1; unsigned int input1:1; unsigned int vhfbw7:1; unsigned int uhfbw8:1; unsigned int disable_power_mgmt:1; + unsigned int read_not_reliable:1; unsigned int demod; enum firmware_type type:2; }; diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c index 9c690a9bd..6333d7d18 100644 --- a/linux/drivers/media/video/cx23885/cx23885-dvb.c +++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c @@ -256,15 +256,18 @@ static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = { static struct tda18271_config hauppauge_tda18271_config = { .std_map = &hauppauge_tda18271_std_map, .gate = TDA18271_GATE_ANALOG, + .output_opt = TDA18271_OUTPUT_LT_OFF, }; static struct tda18271_config hauppauge_hvr1200_tuner_config = { .std_map = &hauppauge_hvr1200_tda18271_std_map, .gate = TDA18271_GATE_ANALOG, + .output_opt = TDA18271_OUTPUT_LT_OFF, }; static struct tda18271_config hauppauge_hvr1210_tuner_config = { .gate = TDA18271_GATE_DIGITAL, + .output_opt = TDA18271_OUTPUT_LT_OFF, }; static struct tda18271_std_map hauppauge_hvr127x_std_map = { @@ -276,6 +279,7 @@ static struct tda18271_std_map hauppauge_hvr127x_std_map = { static struct tda18271_config hauppauge_hvr127x_config = { .std_map = &hauppauge_hvr127x_std_map, + .output_opt = TDA18271_OUTPUT_LT_OFF, }; static struct lgdt3305_config hauppauge_lgdt3305_config = { diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.c index 336a20ede..e4d7c13ca 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -298,6 +298,7 @@ static struct tda829x_config tda829x_no_probe = { static struct tda18271_config hauppauge_tda18271_dvb_config = { .gate = TDA18271_GATE_ANALOG, + .output_opt = TDA18271_OUTPUT_LT_OFF, }; static int pvr2_tda10048_attach(struct pvr2_dvb_adapter *adap) @@ -393,6 +394,7 @@ static struct tda18271_std_map hauppauge_tda18271_std_map = { static struct tda18271_config hauppauge_tda18271_config = { .std_map = &hauppauge_tda18271_std_map, .gate = TDA18271_GATE_ANALOG, + .output_opt = TDA18271_OUTPUT_LT_OFF, }; static int pvr2_s5h1409_attach(struct pvr2_dvb_adapter *adap) diff --git a/linux/drivers/media/video/saa7134/saa7134-dvb.c b/linux/drivers/media/video/saa7134/saa7134-dvb.c index 18223dafe..dc2428f12 100644 --- a/linux/drivers/media/video/saa7134/saa7134-dvb.c +++ b/linux/drivers/media/video/saa7134/saa7134-dvb.c @@ -1007,6 +1007,7 @@ static struct tda18271_config hcw_tda18271_config = { .std_map = &hauppauge_tda18271_std_map, .gate = TDA18271_GATE_ANALOG, .config = 3, + .output_opt = TDA18271_OUTPUT_LT_OFF, }; static struct tda829x_config tda829x_no_probe = { diff --git a/linux/drivers/staging/cx25821/Makefile b/linux/drivers/staging/cx25821/Makefile index 020d84404..2029cd046 100644 --- a/linux/drivers/staging/cx25821/Makefile +++ b/linux/drivers/staging/cx25821/Makefile @@ -11,5 +11,3 @@ obj-$(CONFIG_VIDEO_CX25821_ALSA) += cx25821-alsa.o EXTRA_CFLAGS += -Idrivers/media/video EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core EXTRA_CFLAGS += -Idrivers/media/dvb/frontends - -EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m) diff --git a/linux/drivers/staging/cx25821/README b/linux/drivers/staging/cx25821/README new file mode 100644 index 000000000..a9ba50b98 --- /dev/null +++ b/linux/drivers/staging/cx25821/README @@ -0,0 +1,6 @@ +Todo: + - checkpatch.pl cleanups + - sparse cleanups + +Please send patches to linux-media@vger.kernel.org + diff --git a/linux/drivers/staging/go7007/go7007-fw.c b/linux/drivers/staging/go7007/go7007-fw.c index 871ed43e4..73d867024 100644 --- a/linux/drivers/staging/go7007/go7007-fw.c +++ b/linux/drivers/staging/go7007/go7007-fw.c @@ -1034,7 +1034,8 @@ static int brctrl_to_package(struct go7007 *go, 0xBF1B, framelen[7], 0, 0, -#if 0 /* Remove once we don't care about matching */ +#if 0 /* keep */ + /* Remove once we don't care about matching */ 0x200e, 0x0000, 0xBF56, 4, 0xBF57, 0, diff --git a/linux/drivers/staging/go7007/go7007-v4l2.c b/linux/drivers/staging/go7007/go7007-v4l2.c index 1098cffb6..c929204db 100644 --- a/linux/drivers/staging/go7007/go7007-v4l2.c +++ b/linux/drivers/staging/go7007/go7007-v4l2.c @@ -327,7 +327,7 @@ static int set_capture_size(struct go7007 *go, struct v4l2_format *fmt, int try) return 0; } -#if 0 +#if 0 /* keep */ static int clip_to_modet_map(struct go7007 *go, int region, struct v4l2_clip *clip_list) { @@ -610,7 +610,7 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(cap->driver, "go7007", sizeof(cap->driver)); strlcpy(cap->card, go->name, sizeof(cap->card)); -#if 0 +#if 0 /* keep */ strlcpy(cap->bus_info, dev_name(&dev->udev->dev), sizeof(cap->bus_info)); #endif @@ -1178,7 +1178,7 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *std) return 0; } -#if 0 +#if 0 /* keep */ case VIDIOC_QUERYSTD: { v4l2_std_id *std = arg; @@ -1457,7 +1457,7 @@ static int vidioc_s_jpegcomp(struct file *file, void *priv, and vidioc_s_ext_ctrls() */ -#if 0 +#if 0 /* keep */ /* Temporary ioctls for controlling compression characteristics */ case GO7007IOC_S_BITRATE: { diff --git a/linux/drivers/staging/go7007/wis-sony-tuner.c b/linux/drivers/staging/go7007/wis-sony-tuner.c index 086896cec..cfc1ec64e 100644 --- a/linux/drivers/staging/go7007/wis-sony-tuner.c +++ b/linux/drivers/staging/go7007/wis-sony-tuner.c @@ -386,7 +386,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) struct wis_sony_tuner *t = i2c_get_clientdata(client); switch (cmd) { -#if 0 +#if 0 /* keep */ #ifdef TUNER_SET_TYPE_ADDR case TUNER_SET_TYPE_ADDR: { diff --git a/linux/drivers/staging/go7007/wis-tw9903.c b/linux/drivers/staging/go7007/wis-tw9903.c index 6c3427bb6..1360dd1bd 100644 --- a/linux/drivers/staging/go7007/wis-tw9903.c +++ b/linux/drivers/staging/go7007/wis-tw9903.c @@ -111,7 +111,8 @@ static int wis_tw9903_command(struct i2c_client *client, i2c_smbus_write_byte_data(client, 0x02, 0x40 | (*input << 1)); break; } -#if 0 /* The scaler on this thing seems to be horribly broken */ +#if 0 /* keep */ + /* The scaler on this thing seems to be horribly broken */ case DECODER_SET_RESOLUTION: { struct video_decoder_resolution *res = arg; @@ -169,7 +170,7 @@ static int wis_tw9903_command(struct i2c_client *client, ctrl->default_value = 0x60; ctrl->flags = 0; break; -#if 0 +#if 0 /* keep */ /* I don't understand how the Chroma Gain registers work... */ case V4L2_CID_SATURATION: ctrl->type = V4L2_CTRL_TYPE_INTEGER; @@ -216,7 +217,7 @@ static int wis_tw9903_command(struct i2c_client *client, dec->contrast = ctrl->value; write_reg(client, 0x11, dec->contrast); break; -#if 0 +#if 0 /* keep */ case V4L2_CID_SATURATION: if (ctrl->value > 127) dec->saturation = 127; @@ -250,7 +251,7 @@ static int wis_tw9903_command(struct i2c_client *client, case V4L2_CID_CONTRAST: ctrl->value = dec->contrast; break; -#if 0 +#if 0 /* keep */ case V4L2_CID_SATURATION: ctrl->value = dec->saturation; break; diff --git a/linux/drivers/staging/tm6000/Kconfig b/linux/drivers/staging/tm6000/Kconfig new file mode 100644 index 000000000..cb2011536 --- /dev/null +++ b/linux/drivers/staging/tm6000/Kconfig @@ -0,0 +1,32 @@ +config VIDEO_TM6000 + tristate "TV Master TM5600/6000/6010 driver" + depends on VIDEO_DEV && I2C && INPUT && EXPERIMENTAL + select VIDEO_TUNER + select TUNER_XC2028 + select VIDEOBUF_VMALLOC + help + Support for TM5600/TM6000/TM6010 USB Device + + Since these cards have no MPEG decoder onboard, they transmit + only compressed MPEG data over the usb bus, so you need + an external software decoder to watch TV on your computer. + + Say Y if you own such a device and want to use it. + +config VIDEO_TM6000_ALSA + tristate "TV Master TM5600/6000/6010 audio support" + depends on VIDEO_TM6000 && SND && EXPERIMENTAL + select SND_PCM + ---help--- + This is a video4linux driver for direct (DMA) audio for + TM5600/TM6000/TM6010 USB Devices. + + To compile this driver as a module, choose M here: the + module will be called tm6000-alsa. + +config VIDEO_TM6000_DVB + bool "DVB Support for tm6000 based TV cards" + depends on VIDEO_TM6000 && DVB_CORE && EXPERIMENTAL + select DVB_ZL10353 + ---help--- + This adds support for DVB cards based on the tm5600/tm6000 chip. diff --git a/linux/drivers/staging/tm6000/Makefile b/linux/drivers/staging/tm6000/Makefile new file mode 100644 index 000000000..25aefe74d --- /dev/null +++ b/linux/drivers/staging/tm6000/Makefile @@ -0,0 +1,15 @@ +tm6000-objs := tm6000-cards.o \ + tm6000-core.o \ + tm6000-i2c.o \ + tm6000-video.o \ + tm6000-stds.o + +ifeq ($(CONFIG_VIDEO_TM6000_DVB),y) +tm6000-objs += tm6000-dvb.o \ + hack.o +endif + +obj-$(CONFIG_VIDEO_TM6000) += tm6000.o +obj-$(CONFIG_VIDEO_TM6000_ALSA) += tm6000-alsa.o + +EXTRA_CFLAGS = -Idrivers/media/video diff --git a/linux/drivers/staging/tm6000/README b/linux/drivers/staging/tm6000/README new file mode 100644 index 000000000..cff09b7b4 --- /dev/null +++ b/linux/drivers/staging/tm6000/README @@ -0,0 +1,11 @@ +Todo: + - checkpatch.pl cleanups + - sparse cleanups + - convert to new i2c approach + - better support DVB + - fix reading from i2c, if possible + - fix loosing frames + - fix oops? + +Please send patches to linux-media@vger.kernel.org + diff --git a/linux/drivers/staging/tm6000/hack.c b/linux/drivers/staging/tm6000/hack.c new file mode 100644 index 000000000..f181fce67 --- /dev/null +++ b/linux/drivers/staging/tm6000/hack.c @@ -0,0 +1,252 @@ + + + + + + +/* + hack.h - hackish code that needs to be improved (or removed) at a + later point + + Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation version 2 + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "hack.h" + +#include "tm6000.h" + +#include <linux/usb.h> + +static inline int tm6000_snd_control_msg(struct tm6000_core *dev, __u8 request, __u16 value, __u16 index, void *data, __u16 size) +{ + return tm6000_read_write_usb (dev, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, request, value, index, data, size); +} + +static int pseudo_zl10353_pll(struct tm6000_core *tm6000_dev, struct dvb_frontend_parameters *p) +{ + int ret; + u8 *data = kzalloc(50*sizeof(u8), GFP_KERNEL); + +printk(KERN_ALERT "should set frequency %u\n", p->frequency); +printk(KERN_ALERT "and bandwith %u\n", p->u.ofdm.bandwidth); + + if(tm6000_dev->dvb->frontend->ops.tuner_ops.set_params) { + tm6000_dev->dvb->frontend->ops.tuner_ops.set_params(tm6000_dev->dvb->frontend, p); + } + else { + printk(KERN_ALERT "pseudo zl10353: couldn't set tuner parameters\n"); + } + + // init ZL10353 + data[0] = 0x0b; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x501e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x80; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x551e, 0x00, data, 0x1); + msleep(100); + data[0] = 0x01; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0xea1e, 0x00, data, 0x1); + msleep(100); + data[0] = 0x00; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0xea1e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x1c; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x561e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x40; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x5e1e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x36; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x641e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x67; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x651e, 0x00, data, 0x1); + msleep(15); + data[0] = 0xe5; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x661e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x19; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x6c1e, 0x00, data, 0x1); + msleep(15); + data[0] = 0xe9; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x6d1e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x44; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x511e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x46; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x521e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x15; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x531e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x0f; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x541e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x75; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x5c1e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x01; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x701e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x00; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x701e, 0x00, data, 0x1); + msleep(15); + + msleep(50); + + switch(p->u.ofdm.bandwidth) { + case BANDWIDTH_8_MHZ: + data[0] = 0x00; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x701e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x36; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x641e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x67; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x651e, 0x00, data, 0x1); + msleep(15); + data[0] = 0xe5; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x661e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x19; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x6c1e, 0x00, data, 0x1); + msleep(15); + data[0] = 0xe9; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x6d1e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x44; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x511e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x46; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x521e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x15; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x531e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x0f; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x541e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x75; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x5c1e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x01; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x701e, 0x00, data, 0x1); + msleep(15); + break; + + default: + printk(KERN_ALERT "tm6000: bandwidth not supported\n"); + case BANDWIDTH_7_MHZ: + data[0] = 0x00; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x701e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x35; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x641e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x5a; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x651e, 0x00, data, 0x1); + msleep(15); + data[0] = 0xe9; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x661e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x19; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x6c1e, 0x00, data, 0x1); + msleep(15); + data[0] = 0xe9; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x6d1e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x44; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x511e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x46; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x521e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x15; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x531e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x0f; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x541e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x86; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x5c1e, 0x00, data, 0x1); + msleep(15); + data[0] = 0x01; + ret = tm6000_snd_control_msg(tm6000_dev, 0x10, 0x701e, 0x00, data, 0x1); + msleep(15); + break; + } + + kfree(data); + + return 0; +}; + + + +int pseudo_zl10353_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct tm6000_core *tm6000_dev = fe->dvb->priv; + u32 status; + + if(p != NULL) { +// mutex_lock(&tm6000_dev->mutex); + pseudo_zl10353_pll(tm6000_dev, p); +// mutex_unlock(&tm6000_dev->mutex); + } + + if(tm6000_dev->dvb->frontend->ops.read_status) { + tm6000_dev->dvb->frontend->ops.read_status(tm6000_dev->dvb->frontend, &status); + printk(KERN_ALERT "demodulator status: FE_HAS_CARRIER %i \n", (status & FE_HAS_CARRIER)); + printk(KERN_ALERT "demodulator status: FE_HAS_VITERBI %i \n", (status & FE_HAS_VITERBI)); + printk(KERN_ALERT "demodulator status: FE_HAS_LOCK %i \n", (status & FE_HAS_LOCK)); + printk(KERN_ALERT "demodulator status: FE_HAS_SYNC %i \n", (status & FE_HAS_SYNC)); + printk(KERN_ALERT "demodulator status: FE_HAS_SIGNAL %i \n", (status & FE_HAS_SIGNAL)); + } + else { + printk(KERN_ALERT "pseudo zl10353: couldn't read demodulator status\n"); + } + return 0; +} + +int pseudo_zl10353_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + + *status = FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK | FE_HAS_SIGNAL; + + return 0; +} + +struct dvb_frontend* pseudo_zl10353_attach(struct tm6000_core *dev, + const struct zl10353_config *config, + struct i2c_adapter *i2c) +{ + struct tm6000_dvb *dvb = dev->dvb; + + dvb->frontend = dvb_attach(zl10353_attach, config, i2c); + if(!dvb->frontend) { + printk(KERN_ERR "Error during zl10353_attach!\n"); + return NULL; + } + + /* override some functions with our implementations */ + dvb->frontend->ops.set_frontend = pseudo_zl10353_set_frontend; + dvb->frontend->ops.read_status = pseudo_zl10353_read_status; + dvb->frontend->frontend_priv = dev; + + return dvb->frontend; +} diff --git a/linux/drivers/staging/tm6000/hack.h b/linux/drivers/staging/tm6000/hack.h new file mode 100644 index 000000000..96f1b61df --- /dev/null +++ b/linux/drivers/staging/tm6000/hack.h @@ -0,0 +1,45 @@ +/* + hack.h - hackish code that needs to be improved (or removed) at a + later point + + Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation version 2 + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef HACK_H +#define HACK_H + +#include <linux/i2c.h> + +#include "zl10353.h" +#include "dvb_frontend.h" + +struct tm6000_core; + +int pseudo_zl103530_init(struct dvb_frontend *fe); + +int pseudo_zl10353_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p); + +int pseudo_zl10353_read_status(struct dvb_frontend *fe, fe_status_t *status); + +int pseudo_zl10353_read_signal_strength(struct dvb_frontend* fe, u16* strength); + +int pseudo_zl10353_read_snr(struct dvb_frontend *fe, u16 *snr); + +struct dvb_frontend* pseudo_zl10353_attach(struct tm6000_core *dev, + const struct zl10353_config *config, + struct i2c_adapter *i2c); + +#endif diff --git a/linux/drivers/staging/tm6000/tm6000-alsa.c b/linux/drivers/staging/tm6000/tm6000-alsa.c new file mode 100644 index 000000000..a5654e1c5 --- /dev/null +++ b/linux/drivers/staging/tm6000/tm6000-alsa.c @@ -0,0 +1,441 @@ +/* + * + * Support for audio capture for tm5600/6000 + * (c) 2007-2008 Mauro Carvalho Chehab <mchehab@redhat.com> + * + * Based on cx88-alsa.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/usb.h> + +#include <asm/delay.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/control.h> +#include <sound/initval.h> + +#include "compat.h" + +#include "tm6000.h" +#include "tm6000-regs.h" + +#undef dprintk + +#define dprintk(level, fmt, arg...) do { \ + if (debug >= level) \ + printk(KERN_INFO "%s/1: " fmt, chip->core->name , ## arg); \ + } while (0) + +/**************************************************************************** + Data type declarations - Can be moded to a header file later + ****************************************************************************/ + +struct snd_tm6000_card { + struct snd_card *card; + + spinlock_t reg_lock; + + atomic_t count; + + unsigned int period_size; + unsigned int num_periods; + + struct tm6000_core *core; + struct tm6000_buffer *buf; + + int bufsize; + + struct snd_pcm_substream *substream; +}; + +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 8) +#define chip_t snd_tm6000_card_t +#endif + +/**************************************************************************** + Module global static vars + ****************************************************************************/ + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ +static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1}; + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 10) +static unsigned int dummy; +module_param_array(enable, bool, dummy, 0444); +#else +module_param_array(enable, bool, NULL, 0444); +#endif +MODULE_PARM_DESC(enable, "Enable tm6000x soundcard. default enabled."); + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 10) +module_param_array(index, int, dummy, 0444); +#else +module_param_array(index, int, NULL, 0444); +#endif +MODULE_PARM_DESC(index, "Index value for tm6000x capture interface(s)."); + + +/**************************************************************************** + Module macros + ****************************************************************************/ + +MODULE_DESCRIPTION("ALSA driver module for tm5600/tm6000 based TV cards"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("{{Trident,tm5600}," + "{{Trident,tm6000}"); +static unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug messages"); + +/**************************************************************************** + Module specific funtions + ****************************************************************************/ + +/* + * BOARD Specific: Sets audio DMA + */ + +static int _tm6000_start_audio_dma(struct snd_tm6000_card *chip) +{ + struct tm6000_core *core = chip->core; + int val; + + /* Enables audio */ + val = tm6000_get_reg(core, REQ_07_SET_GET_AVREG, 0xcc, 0x0); + val |= 0x20; + tm6000_set_reg(core, REQ_07_SET_GET_AVREG, 0xcc, val); + + tm6000_set_reg(core, REQ_08_SET_GET_AVREG_BIT, 0x01, 0x80); + + return 0; +} + +/* + * BOARD Specific: Resets audio DMA + */ +static int _tm6000_stop_audio_dma(struct snd_tm6000_card *chip) +{ + struct tm6000_core *core = chip->core; + int val; + dprintk(1, "Stopping audio DMA\n"); + + /* Enables audio */ + val = tm6000_get_reg(core, REQ_07_SET_GET_AVREG, 0xcc, 0x0); + val &= ~0x20; + tm6000_set_reg(core, REQ_07_SET_GET_AVREG, 0xcc, val); + + tm6000_set_reg(core, REQ_08_SET_GET_AVREG_BIT, 0x01, 0); + + return 0; +} + +static int dsp_buffer_free(struct snd_tm6000_card *chip) +{ + BUG_ON(!chip->bufsize); + + dprintk(2, "Freeing buffer\n"); + + /* FIXME: Frees buffer */ + + chip->bufsize = 0; + + return 0; +} + +/**************************************************************************** + ALSA PCM Interface + ****************************************************************************/ + +/* + * Digital hardware definition + */ +#define DEFAULT_FIFO_SIZE 4096 + +static struct snd_pcm_hardware snd_tm6000_digital_hw = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP_VALID, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + + .rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000, + .rate_min = 44100, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + .period_bytes_min = DEFAULT_FIFO_SIZE/4, + .period_bytes_max = DEFAULT_FIFO_SIZE/4, + .periods_min = 1, + .periods_max = 1024, + .buffer_bytes_max = (1024*1024), +}; + +/* + * audio pcm capture open callback + */ +static int snd_tm6000_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + int err; + + err = snd_pcm_hw_constraint_pow2(runtime, 0, + SNDRV_PCM_HW_PARAM_PERIODS); + if (err < 0) + goto _error; + + chip->substream = substream; + + runtime->hw = snd_tm6000_digital_hw; + + return 0; +_error: + dprintk(1, "Error opening PCM!\n"); + return err; +} + +/* + * audio close callback + */ +static int snd_tm6000_close(struct snd_pcm_substream *substream) +{ + return 0; +} + +/* + * hw_params callback + */ +static int snd_tm6000_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream); + + if (substream->runtime->dma_area) { + dsp_buffer_free(chip); + substream->runtime->dma_area = NULL; + } + + chip->period_size = params_period_bytes(hw_params); + chip->num_periods = params_periods(hw_params); + chip->bufsize = chip->period_size * params_periods(hw_params); + + BUG_ON(!chip->bufsize); + + dprintk(1, "Setting buffer\n"); + + /* FIXME: Allocate buffer for audio */ + +#if 0 + substream->runtime->dma_area = chip->dma_risc->vmalloc; +#endif + + return 0; +} + +/* + * hw free callback + */ +static int snd_tm6000_hw_free(struct snd_pcm_substream *substream) +{ + + struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream); + + if (substream->runtime->dma_area) { + dsp_buffer_free(chip); + substream->runtime->dma_area = NULL; + } + + return 0; +} + +/* + * prepare callback + */ +static int snd_tm6000_prepare(struct snd_pcm_substream *substream) +{ + return 0; +} + + +/* + * trigger callback + */ +static int snd_tm6000_card_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream); + int err; + + spin_lock(&chip->reg_lock); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + err = _tm6000_start_audio_dma(chip); + break; + case SNDRV_PCM_TRIGGER_STOP: + err = _tm6000_stop_audio_dma(chip); + break; + default: + err = -EINVAL; + break; + } + + spin_unlock(&chip->reg_lock); + + return err; +} + +/* + * pointer callback + */ +static snd_pcm_uframes_t snd_tm6000_pointer(struct snd_pcm_substream *substream) +{ + struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + u16 count; + + count = atomic_read(&chip->count); + + return runtime->period_size * (count & (runtime->periods-1)); +} + +/* + * operators + */ +static struct snd_pcm_ops snd_tm6000_pcm_ops = { + .open = snd_tm6000_pcm_open, + .close = snd_tm6000_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_tm6000_hw_params, + .hw_free = snd_tm6000_hw_free, + .prepare = snd_tm6000_prepare, + .trigger = snd_tm6000_card_trigger, + .pointer = snd_tm6000_pointer, +}; + +/* + * create a PCM device + */ +static int __devinit snd_tm6000_pcm(struct snd_tm6000_card *chip, + int device, char *name) +{ + int err; + struct snd_pcm *pcm; + + err = snd_pcm_new(chip->card, name, device, 0, 1, &pcm); + if (err < 0) + return err; + pcm->private_data = chip; + strcpy(pcm->name, name); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_tm6000_pcm_ops); + + return 0; +} + +/* FIXME: Control interface - How to control volume/mute? */ + +/**************************************************************************** + Basic Flow for Sound Devices + ****************************************************************************/ + +/* + * Alsa Constructor - Component probe + */ + +int tm6000_audio_init(struct tm6000_core *dev, int idx) +{ + struct snd_card *card; + struct snd_tm6000_card *chip; + int rc, len; + char component[14]; + + if (idx >= SNDRV_CARDS) + return -ENODEV; + + if (!enable[idx]) + return -ENOENT; + + rc = snd_card_create(index[idx], id[idx], THIS_MODULE, 0, &card); + if (rc < 0) { + snd_printk(KERN_ERR "cannot create card instance %d\n", idx); + return rc; + } + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) { + rc = -ENOMEM; + goto error; + } + + chip->core = dev; + chip->card = card; + + strcpy(card->driver, "tm6000-alsa"); + sprintf(component, "USB%04x:%04x", + le16_to_cpu(dev->udev->descriptor.idVendor), + le16_to_cpu(dev->udev->descriptor.idProduct)); + snd_component_add(card, component); + + if (dev->udev->descriptor.iManufacturer) + len = usb_string(dev->udev, + dev->udev->descriptor.iManufacturer, + card->longname, sizeof(card->longname)); + else + len = 0; + + if (len > 0) + strlcat(card->longname, " ", sizeof(card->longname)); + + strlcat(card->longname, card->shortname, sizeof(card->longname)); + + len = strlcat(card->longname, " at ", sizeof(card->longname)); + + if (len < sizeof(card->longname)) + usb_make_path(dev->udev, card->longname + len, + sizeof(card->longname) - len); + + strlcat(card->longname, + dev->udev->speed == USB_SPEED_LOW ? ", low speed" : + dev->udev->speed == USB_SPEED_FULL ? ", full speed" : + ", high speed", + sizeof(card->longname)); + + rc = snd_tm6000_pcm(chip, 0, "tm6000 Digital"); + if (rc < 0) + goto error; + + rc = snd_card_register(card); + if (rc < 0) + goto error; + + + return 0; + +error: + snd_card_free(card); + return rc; +} +EXPORT_SYMBOL_GPL(tm6000_audio_init); + +#if 0 +/* + * module remove + */ +static void tm6000_audio_fini(void) +{ +} + +module_init(tm6000_audio_init); +module_exit(tm6000_audio_fini); + +#endif diff --git a/linux/drivers/staging/tm6000/tm6000-cards.c b/linux/drivers/staging/tm6000/tm6000-cards.c new file mode 100644 index 000000000..7b52b403a --- /dev/null +++ b/linux/drivers/staging/tm6000/tm6000-cards.c @@ -0,0 +1,676 @@ +/* + tm6000-cards.c - driver for TM5600/TM6000 USB video capture devices + + Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation version 2 + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/usb.h> +#include <linux/version.h> +#include "compat.h" +#include <media/v4l2-common.h> +#include <media/tuner.h> +#include <media/tvaudio.h> +#include <media/i2c-addr.h> + +#include "tm6000.h" +#include "tm6000-regs.h" +#include "tuner-xc2028.h" + +#define TM6000_BOARD_UNKNOWN 0 +#define TM5600_BOARD_GENERIC 1 +#define TM6000_BOARD_GENERIC 2 +#define TM6010_BOARD_GENERIC 3 +#define TM5600_BOARD_10MOONS_UT821 4 +#define TM5600_BOARD_10MOONS_UT330 5 +#define TM6000_BOARD_ADSTECH_DUAL_TV 6 +#define TM6000_BOARD_FREECOM_AND_SIMILAR 7 +#define TM6000_BOARD_ADSTECH_MINI_DUAL_TV 8 +#define TM6010_BOARD_HAUPPAUGE_900H 9 + +#define TM6000_MAXBOARDS 16 +static unsigned int card[] = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET }; + +module_param_array(card, int, NULL, 0444); + +static unsigned long tm6000_devused; + +#if 0 +/* This will be needed sooner or later, to allow selecting video mux entries */ +#define MAX_TM6000_INPUT 3 + +struct tm6000_input { + enum tm6000_itype type; + u32 gpio_addr; + unsigned int gpio_val; + int vmux; /* Used to control registers 0xe3, 0xe8, 0xeb */ +}; +#endif + +struct tm6000_board { + char *name; + + struct tm6000_capabilities caps; + + enum tm6000_devtype type; /* variant of the chipset */ + int tuner_type; /* type of the tuner */ + int tuner_addr; /* tuner address */ + int demod_addr; /* demodulator address */ + int gpio_addr_tun_reset; /* GPIO used for tuner reset */ +#if 0 + struct tm6000_input input[MAX_TM6000_INPUT]; +#endif +}; + +struct tm6000_board tm6000_boards[] = { + [TM6000_BOARD_UNKNOWN] = { + .name = "Unknown tm6000 video grabber", + .caps = { + .has_tuner = 1, + }, + .gpio_addr_tun_reset = TM6000_GPIO_1, + }, + [TM5600_BOARD_GENERIC] = { + .name = "Generic tm5600 board", + .type = TM5600, + .tuner_type = TUNER_XC2028, + .tuner_addr = 0xc2 >> 1, + .caps = { + .has_tuner = 1, + }, + .gpio_addr_tun_reset = TM6000_GPIO_1, + }, + [TM6000_BOARD_GENERIC] = { + .name = "Generic tm6000 board", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0xc2 >> 1, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + }, + .gpio_addr_tun_reset = TM6000_GPIO_1, + }, + [TM6010_BOARD_GENERIC] = { + .name = "Generic tm6010 board", + .type = TM6010, + .tuner_type = TUNER_XC2028, + .tuner_addr = 0xc2 >> 1, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + }, + .gpio_addr_tun_reset = TM6010_GPIO_4, + }, + [TM5600_BOARD_10MOONS_UT821] = { + .name = "10Moons UT 821", + .tuner_type = TUNER_XC2028, + .type = TM5600, + .tuner_addr = 0xc2 >> 1, + .caps = { + .has_tuner = 1, + .has_eeprom = 1, + }, + .gpio_addr_tun_reset = TM6000_GPIO_1, + }, + [TM5600_BOARD_10MOONS_UT330] = { + .name = "10Moons UT 330", + .tuner_type = TUNER_PHILIPS_FQ1216AME_MK4, + .tuner_addr = 0xc8 >> 1, + .caps = { + .has_tuner = 1, + .has_dvb = 0, + .has_zl10353 = 0, + .has_eeprom = 1, + }, + }, + [TM6000_BOARD_ADSTECH_DUAL_TV] = { + .name = "ADSTECH Dual TV USB", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0xc8 >> 1, + .caps = { + .has_tuner = 1, + .has_tda9874 = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 1, + }, + }, + [TM6000_BOARD_FREECOM_AND_SIMILAR] = { + .name = "Freecom Hybrid Stick / Moka DVB-T Receiver Dual", + .tuner_type = TUNER_XC2028, /* has a XC3028 */ + .tuner_addr = 0xc2 >> 1, + .demod_addr = 0x1e >> 1, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 0, + .has_remote = 1, + }, + .gpio_addr_tun_reset = TM6000_GPIO_4, + }, + [TM6000_BOARD_ADSTECH_MINI_DUAL_TV] = { + .name = "ADSTECH Mini Dual TV USB", + .tuner_type = TUNER_XC2028, /* has a XC3028 */ + .tuner_addr = 0xc8 >> 1, + .demod_addr = 0x1e >> 1, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 0, + }, + .gpio_addr_tun_reset = TM6000_GPIO_4, + }, + [TM6010_BOARD_HAUPPAUGE_900H] = { + .name = "Hauppauge HVR-900H", + .tuner_type = TUNER_XC2028, /* has a XC3028 */ + .tuner_addr = 0xc2 >> 1, + .demod_addr = 0x1e >> 1, + .type = TM6010, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 1, + }, + .gpio_addr_tun_reset = TM6000_GPIO_2, + }, +}; + +/* table of devices that work with this driver */ +struct usb_device_id tm6000_id_table [] = { + { USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_10MOONS_UT821 }, + { USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC }, + { USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV }, + { USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR }, + { USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV }, + { USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, + { }, +}; + +/* Tuner callback to provide the proper gpio changes needed for xc2028 */ + +static int tm6000_tuner_callback(void *ptr, int component, int command, int arg) +{ + int rc=0; + struct tm6000_core *dev = ptr; + + if (dev->tuner_type!=TUNER_XC2028) + return 0; + + switch (command) { + case XC2028_RESET_CLK: + tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT, + 0x02, arg); + msleep(10); + rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, + TM6000_GPIO_CLK, 0); + if (rc<0) + return rc; + msleep(10); + rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, + TM6000_GPIO_CLK, 1); + break; + case XC2028_TUNER_RESET: + /* Reset codes during load firmware */ + switch (arg) { + case 0: + tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, + dev->tuner_reset_gpio, 0x00); + msleep(130); + tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, + dev->tuner_reset_gpio, 0x01); + msleep(130); + break; + case 1: + tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT, + 0x02, 0x01); + msleep(10); + break; + + case 2: + rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, + TM6000_GPIO_CLK, 0); + if (rc<0) + return rc; + msleep(100); + rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, + TM6000_GPIO_CLK, 1); + msleep(100); + break; + } + } + return (rc); +} + +static void tm6000_config_tuner (struct tm6000_core *dev) +{ + struct tuner_setup tun_setup; + + /* Load tuner module */ + v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "tuner", "tuner",dev->tuner_addr, NULL); + + memset(&tun_setup, 0, sizeof(tun_setup)); + tun_setup.type = dev->tuner_type; + tun_setup.addr = dev->tuner_addr; + tun_setup.mode_mask = T_ANALOG_TV | T_RADIO; + tun_setup.tuner_callback = tm6000_tuner_callback; + + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup); + + if (dev->tuner_type == TUNER_XC2028) { + struct v4l2_priv_tun_config xc2028_cfg; + struct xc2028_ctrl ctl; + + memset(&xc2028_cfg, 0, sizeof(xc2028_cfg)); + memset (&ctl,0,sizeof(ctl)); + + ctl.mts = 1; + ctl.read_not_reliable = 1; + ctl.msleep = 10; + + xc2028_cfg.tuner = TUNER_XC2028; + xc2028_cfg.priv = &ctl; + + switch(dev->model) { + case TM6010_BOARD_HAUPPAUGE_900H: + ctl.fname = "xc3028L-v36.fw"; + break; + default: + if (dev->dev_type == TM6010) + ctl.fname = "xc3028-v27.fw"; + else + ctl.fname = "tm6000-xc3028.fw"; + } + + printk(KERN_INFO "Setting firmware parameters for xc2028\n"); + + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, + &xc2028_cfg); + } +} + +static int tm6000_init_dev(struct tm6000_core *dev) +{ + struct v4l2_frequency f; + int rc = 0; + + mutex_init(&dev->lock); + + mutex_lock(&dev->lock); + + /* Initializa board-specific data */ + dev->dev_type = tm6000_boards[dev->model].type; + dev->tuner_type = tm6000_boards[dev->model].tuner_type; + dev->tuner_addr = tm6000_boards[dev->model].tuner_addr; + dev->tuner_reset_gpio = tm6000_boards[dev->model].gpio_addr_tun_reset; + + dev->demod_addr = tm6000_boards[dev->model].demod_addr; + + dev->caps = tm6000_boards[dev->model].caps; + + /* initialize hardware */ + rc=tm6000_init (dev); + if (rc<0) + goto err; + + rc = v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev); + if (rc < 0) + goto err; + + /* register i2c bus */ + rc=tm6000_i2c_register(dev); + if (rc<0) + goto err; + + /* register and initialize V4L2 */ + rc=tm6000_v4l2_register(dev); + if (rc<0) + goto err; + + /* Default values for STD and resolutions */ + dev->width = 720; + dev->height = 480; + dev->norm = V4L2_STD_PAL_M; + + /* Configure tuner */ + tm6000_config_tuner (dev); + + /* Set video standard */ + v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm); + + /* Set tuner frequency - also loads firmware on xc2028/xc3028 */ + f.tuner = 0; + f.type = V4L2_TUNER_ANALOG_TV; + f.frequency = 3092; /* 193.25 MHz */ + dev->freq = f.frequency; + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f); + + if (dev->caps.has_tda9874) + v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "tvaudio", "tvaudio", I2C_ADDR_TDA9874, NULL); + + if(dev->caps.has_dvb) { + dev->dvb = kzalloc(sizeof(*(dev->dvb)), GFP_KERNEL); + if(!dev->dvb) { + rc = -ENOMEM; + goto err2; + } +#ifdef CONFIG_VIDEO_TM6000_DVB + rc = tm6000_dvb_register(dev); + if(rc < 0) { + kfree(dev->dvb); + dev->dvb = NULL; + goto err2; + } +#endif + } + +err2: + v4l2_device_unregister(&dev->v4l2_dev); + +err: + mutex_unlock(&dev->lock); + return rc; +} + +/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ +#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) + +static void get_max_endpoint ( struct usb_device *usbdev, + char *msgtype, + struct usb_host_endpoint *curr_e, + unsigned int *maxsize, + struct usb_host_endpoint **ep ) +{ + u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize); + unsigned int size = tmp & 0x7ff; + + if (usbdev->speed == USB_SPEED_HIGH) + size = size * hb_mult (tmp); + + if (size>*maxsize) { + *ep = curr_e; + *maxsize = size; + printk("tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n", + msgtype, curr_e->desc.bEndpointAddress, + size); + } +} + +/* + * tm6000_usb_probe() + * checks for supported devices + */ +static int tm6000_usb_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *usbdev; + struct tm6000_core *dev = NULL; + int i,rc=0; + int nr=0; + char *speed; + +#if 0 + if(interface->minor != 0) + return -1; +#endif + + usbdev=usb_get_dev(interface_to_usbdev(interface)); + + /* Selects the proper interface */ + rc=usb_set_interface(usbdev,0,1); + if (rc<0) + goto err; + + /* Check to see next free device and mark as used */ + nr=find_first_zero_bit(&tm6000_devused,TM6000_MAXBOARDS); + if (nr >= TM6000_MAXBOARDS) { + printk ("tm6000: Supports only %i em28xx boards.\n",TM6000_MAXBOARDS); + usb_put_dev(usbdev); + return -ENOMEM; + } + + /* Create and initialize dev struct */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) { + printk ("tm6000" ": out of memory!\n"); + usb_put_dev(usbdev); + return -ENOMEM; + } + spin_lock_init(&dev->slock); + + /* Increment usage count */ + tm6000_devused|=1<<nr; + snprintf(dev->name, 29, "tm6000 #%d", nr); + + dev->model=id->driver_info; + if ((card[nr]>=0) && (card[nr]<ARRAY_SIZE(tm6000_boards))) { + dev->model=card[nr]; + } + + INIT_LIST_HEAD(&dev->tm6000_corelist); + dev->udev= usbdev; + dev->devno=nr; + + switch (usbdev->speed) { + case USB_SPEED_LOW: + speed = "1.5"; + break; + case USB_SPEED_UNKNOWN: + case USB_SPEED_FULL: + speed = "12"; + break; + case USB_SPEED_HIGH: + speed = "480"; + break; + default: + speed = "unknown"; + } + + +#if 0 + if (usb_reset_configuration (dev->udev) < 0) { + err("reset_configuration failed"); + goto err; + } +#endif + + /* Get endpoints */ + for (i = 0; i < interface->num_altsetting; i++) { + int ep; + + for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { + struct usb_host_endpoint *e; + int dir_out; + + e = &interface->altsetting[i].endpoint[ep]; + + dir_out = ((e->desc.bEndpointAddress & + USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); + + printk("tm6000: alt %d, interface %i, class %i\n", + i, + interface->altsetting[i].desc.bInterfaceNumber, + interface->altsetting[i].desc.bInterfaceClass); + + switch (e->desc.bmAttributes) { + case USB_ENDPOINT_XFER_BULK: + if (!dir_out) { + get_max_endpoint (usbdev, "Bulk IN", e, + &dev->max_bulk_in, + &dev->bulk_in); + } else { + get_max_endpoint (usbdev, "Bulk OUT", e, + &dev->max_bulk_out, + &dev->bulk_out); + } + break; + case USB_ENDPOINT_XFER_ISOC: + if (!dir_out) { + get_max_endpoint (usbdev, "ISOC IN", e, + &dev->max_isoc_in, + &dev->isoc_in); + } else { + get_max_endpoint (usbdev, "ISOC OUT", e, + &dev->max_isoc_out, + &dev->isoc_out); + } + break; + } + } + } + +#if 0 + if (interface->altsetting->desc.bAlternateSetting) { + printk("selecting alt setting %d\n", + interface->altsetting->desc.bAlternateSetting); + rc = usb_set_interface (usbdev, + interface->altsetting->desc.bInterfaceNumber, + interface->altsetting->desc.bAlternateSetting); + if (rc<0) + goto err; + } +#endif + + printk("tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n", + speed, + le16_to_cpu(dev->udev->descriptor.idVendor), + le16_to_cpu(dev->udev->descriptor.idProduct), + interface->altsetting->desc.bInterfaceNumber); + +/* check if the the device has the iso in endpoint at the correct place */ + if (!dev->isoc_in) { + printk("tm6000: probing error: no IN ISOC endpoint!\n"); + rc= -ENODEV; + + goto err; + } + + /* save our data pointer in this interface device */ + usb_set_intfdata(interface, dev); + + printk("tm6000: Found %s\n", tm6000_boards[dev->model].name); + +#if 0 + retval = usb_register_dev(intf, &dabusb_class); + if (retval) { + usb_set_intfdata (intf, NULL); + return -ENOMEM; + } +#endif + rc=tm6000_init_dev(dev); + + if (rc<0) + goto err; + + return 0; + +err: + printk("tm6000: Error %d while registering\n", rc); + + tm6000_devused&=~(1<<nr); + usb_put_dev(usbdev); + + kfree(dev); + return rc; +} + +/* + * tm6000_usb_disconnect() + * called when the device gets diconencted + * video device will be unregistered on v4l2_close in case it is still open + */ +static void tm6000_usb_disconnect(struct usb_interface *interface) +{ + struct tm6000_core *dev = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + if (!dev) + return; + + printk("tm6000: disconnecting %s\n", dev->name); + + mutex_lock(&dev->lock); + +#ifdef CONFIG_VIDEO_TM6000_DVB + if(dev->dvb) { + tm6000_dvb_unregister(dev); + kfree(dev->dvb); + } +#endif + + tm6000_v4l2_unregister(dev); + + tm6000_i2c_unregister(dev); + + v4l2_device_unregister(&dev->v4l2_dev); + +// wake_up_interruptible_all(&dev->open); + + dev->state |= DEV_DISCONNECTED; + + usb_put_dev(dev->udev); + + mutex_unlock(&dev->lock); + kfree(dev); +} + +static struct usb_driver tm6000_usb_driver = { +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15) + .owner = THIS_MODULE, +#endif + .name = "tm6000", + .probe = tm6000_usb_probe, + .disconnect = tm6000_usb_disconnect, + .id_table = tm6000_id_table, +}; + +static int __init tm6000_module_init(void) +{ + int result; + + printk(KERN_INFO "tm6000" " v4l2 driver version %d.%d.%d loaded\n", + (TM6000_VERSION >> 16) & 0xff, + (TM6000_VERSION >> 8) & 0xff, TM6000_VERSION & 0xff); + + /* register this driver with the USB subsystem */ + result = usb_register(&tm6000_usb_driver); + if (result) + printk("tm6000" + " usb_register failed. Error number %d.\n", result); + + return result; +} + +static void __exit tm6000_module_exit(void) +{ + /* deregister at USB subsystem */ + usb_deregister(&tm6000_usb_driver); +} + +module_init(tm6000_module_init); +module_exit(tm6000_module_exit); + +MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000 USB2 adapter"); +MODULE_AUTHOR("Mauro Carvalho Chehab"); +MODULE_LICENSE("GPL"); diff --git a/linux/drivers/staging/tm6000/tm6000-core.c b/linux/drivers/staging/tm6000/tm6000-core.c new file mode 100644 index 000000000..5b17a851e --- /dev/null +++ b/linux/drivers/staging/tm6000/tm6000-core.c @@ -0,0 +1,523 @@ +/* + tm6000-core.c - driver for TM5600/TM6000 USB video capture devices + + Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org> + + Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com> + - DVB-T support + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation version 2 + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/usb.h> +#include <linux/i2c.h> +#include <linux/video_decoder.h> +#include "compat.h" +#include "tm6000.h" +#include "tm6000-regs.h" +#include <media/v4l2-common.h> +#include <media/tuner.h> + +#define USB_TIMEOUT 5*HZ /* ms */ + +int tm6000_read_write_usb (struct tm6000_core *dev, u8 req_type, u8 req, + u16 value, u16 index, u8 *buf, u16 len) +{ + int ret, i; + unsigned int pipe; + static int ini=0, last=0, n=0; + u8 *data=NULL; + + if (len) + data = kzalloc(len, GFP_KERNEL); + +#if 0 + if (dev->state & DEV_DISCONNECTED) + return(-ENODEV); +#endif + + if (req_type & USB_DIR_IN) + pipe=usb_rcvctrlpipe(dev->udev, 0); + else { + pipe=usb_sndctrlpipe(dev->udev, 0); + memcpy(data, buf, len); + } + + if (tm6000_debug & V4L2_DEBUG_I2C) { + if (!ini) + last=ini=jiffies; + + printk("%06i (dev %p, pipe %08x): ", n, dev->udev, pipe); + + printk( "%s: %06u ms %06u ms %02x %02x %02x %02x %02x %02x %02x %02x ", + (req_type & USB_DIR_IN)?" IN":"OUT", + jiffies_to_msecs(jiffies-last), + jiffies_to_msecs(jiffies-ini), + req_type, req,value&0xff,value>>8, index&0xff, index>>8, + len&0xff, len>>8); + last=jiffies; + n++; + + if ( !(req_type & USB_DIR_IN) ) { + printk(">>> "); + for (i=0;i<len;i++) { + printk(" %02x",buf[i]); + } + printk("\n"); + } + } + + ret = usb_control_msg(dev->udev, pipe, req, req_type, value, index, data, + len, USB_TIMEOUT); + + if (req_type & USB_DIR_IN) + memcpy(buf, data, len); + + if (tm6000_debug & V4L2_DEBUG_I2C) { + if (ret<0) { + if (req_type & USB_DIR_IN) + printk("<<< (len=%d)\n",len); + + printk("%s: Error #%d\n", __FUNCTION__, ret); + } else if (req_type & USB_DIR_IN) { + printk("<<< "); + for (i=0;i<len;i++) { + printk(" %02x",buf[i]); + } + printk("\n"); + } + } + + kfree(data); + + msleep(5); + + return ret; +} + +int tm6000_set_reg (struct tm6000_core *dev, u8 req, u16 value, u16 index) +{ + return + tm6000_read_write_usb (dev, USB_DIR_OUT | USB_TYPE_VENDOR, + req, value, index, NULL, 0); +} + +int tm6000_get_reg (struct tm6000_core *dev, u8 req, u16 value, u16 index) +{ + int rc; + u8 buf[1]; + + rc=tm6000_read_write_usb (dev, USB_DIR_IN | USB_TYPE_VENDOR, req, + value, index, buf, 1); + + if (rc<0) + return rc; + + return *buf; +} + +int tm6000_get_reg16 (struct tm6000_core *dev, u8 req, u16 value, u16 index) +{ + int rc; + u8 buf[2]; + + rc=tm6000_read_write_usb (dev, USB_DIR_IN | USB_TYPE_VENDOR, req, + value, index, buf, 2); + + if (rc<0) + return rc; + + return buf[1]|buf[0]<<8; +} + +void tm6000_set_fourcc_format(struct tm6000_core *dev) +{ + if (dev->dev_type == TM6010) { + if (dev->fourcc == V4L2_PIX_FMT_UYVY) + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xc1, 0xfc); + else + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xc1, 0xfd); + } else { + if (dev->fourcc == V4L2_PIX_FMT_UYVY) + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xc1, 0xd0); + else + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xc1, 0x90); + } +} + +int tm6000_init_analog_mode (struct tm6000_core *dev) +{ + if (dev->dev_type == TM6010) { + int val; + + /* Enable video */ + val = tm6000_get_reg(dev, REQ_07_SET_GET_AVREG, 0xcc, 0); + val |= 0x60; + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xcc, val); + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xfe, 0xcf); + +#if 0 + /* Turn xceive 3028 on */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_3, 0x01); + msleep(11); +#endif + } else { + /* Enables soft reset */ + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0x3f, 0x01); + + if (dev->scaler) { + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xc0, 0x20); + } else { + /* Enable Hfilter and disable TS Drop err */ + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xc0, 0x80); + } + + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xc3, 0x88); + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xda, 0x23); + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xd1, 0xc0); + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xd2, 0xd8); + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xd6, 0x06); + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xdf, 0x1f); + + /* AP Software reset */ + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xff, 0x08); + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xff, 0x00); + + tm6000_set_fourcc_format(dev); + + /* Disables soft reset */ + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0x3f, 0x00); + + /* E3: Select input 0 - TV tuner */ + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xe3, 0x00); + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xeb, 0x60); + + /* This controls input */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_2, 0x0); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_3, 0x01); + } + msleep(20); + + /* Tuner firmware can now be loaded */ + +#if 1 + /*FIXME: Hack!!! */ + struct v4l2_frequency f; + mutex_lock(&dev->lock); + f.frequency=dev->freq; + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f); + mutex_unlock(&dev->lock); + + msleep(100); + tm6000_set_standard (dev, &dev->norm); + tm6000_set_audio_bitrate (dev,48000); +#endif + + return 0; +} + +int tm6000_init_digital_mode (struct tm6000_core *dev) +{ + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00ff, 0x08); + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00ff, 0x00); + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x003f, 0x01); + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00df, 0x08); + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00e2, 0x0c); + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00e8, 0xff); + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00eb, 0xd8); + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00c0, 0x40); + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00c1, 0xd0); + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00c3, 0x09); + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00da, 0x37); + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00d1, 0xd8); + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00d2, 0xc0); + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00d6, 0x60); + + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00e2, 0x0c); + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00e8, 0xff); + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x00eb, 0x08); + msleep(50); + + tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00); + msleep(50); + tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x01); + msleep(50); + tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00); + msleep(100); + + return 0; +} + +struct reg_init { + u8 req; + u8 reg; + u8 val; +}; + +/* The meaning of those initializations are unknown */ +struct reg_init tm6000_init_tab[] = { + /* REG VALUE */ + { REQ_07_SET_GET_AVREG, 0xdf, 0x1f }, + { REQ_07_SET_GET_AVREG, 0xff, 0x08 }, + { REQ_07_SET_GET_AVREG, 0xff, 0x00 }, + { REQ_07_SET_GET_AVREG, 0xd5, 0x4f }, + { REQ_07_SET_GET_AVREG, 0xda, 0x23 }, + { REQ_07_SET_GET_AVREG, 0xdb, 0x08 }, + { REQ_07_SET_GET_AVREG, 0xe2, 0x00 }, + { REQ_07_SET_GET_AVREG, 0xe3, 0x10 }, + { REQ_07_SET_GET_AVREG, 0xe5, 0x00 }, + { REQ_07_SET_GET_AVREG, 0xe8, 0x00 }, + { REQ_07_SET_GET_AVREG, 0xeb, 0x64 }, /* 48000 bits/sample, external input */ + { REQ_07_SET_GET_AVREG, 0xee, 0xc2 }, + { REQ_07_SET_GET_AVREG, 0x3f, 0x01 }, /* Start of soft reset */ + { REQ_07_SET_GET_AVREG, 0x00, 0x00 }, + { REQ_07_SET_GET_AVREG, 0x01, 0x07 }, + { REQ_07_SET_GET_AVREG, 0x02, 0x5f }, + { REQ_07_SET_GET_AVREG, 0x03, 0x00 }, + { REQ_07_SET_GET_AVREG, 0x05, 0x64 }, + { REQ_07_SET_GET_AVREG, 0x07, 0x01 }, + { REQ_07_SET_GET_AVREG, 0x08, 0x82 }, + { REQ_07_SET_GET_AVREG, 0x09, 0x36 }, + { REQ_07_SET_GET_AVREG, 0x0a, 0x50 }, + { REQ_07_SET_GET_AVREG, 0x0c, 0x6a }, + { REQ_07_SET_GET_AVREG, 0x11, 0xc9 }, + { REQ_07_SET_GET_AVREG, 0x12, 0x07 }, + { REQ_07_SET_GET_AVREG, 0x13, 0x3b }, + { REQ_07_SET_GET_AVREG, 0x14, 0x47 }, + { REQ_07_SET_GET_AVREG, 0x15, 0x6f }, + { REQ_07_SET_GET_AVREG, 0x17, 0xcd }, + { REQ_07_SET_GET_AVREG, 0x18, 0x1e }, + { REQ_07_SET_GET_AVREG, 0x19, 0x8b }, + { REQ_07_SET_GET_AVREG, 0x1a, 0xa2 }, + { REQ_07_SET_GET_AVREG, 0x1b, 0xe9 }, + { REQ_07_SET_GET_AVREG, 0x1c, 0x1c }, + { REQ_07_SET_GET_AVREG, 0x1d, 0xcc }, + { REQ_07_SET_GET_AVREG, 0x1e, 0xcc }, + { REQ_07_SET_GET_AVREG, 0x1f, 0xcd }, + { REQ_07_SET_GET_AVREG, 0x20, 0x3c }, + { REQ_07_SET_GET_AVREG, 0x21, 0x3c }, + { REQ_07_SET_GET_AVREG, 0x2d, 0x48 }, + { REQ_07_SET_GET_AVREG, 0x2e, 0x88 }, + { REQ_07_SET_GET_AVREG, 0x30, 0x22 }, + { REQ_07_SET_GET_AVREG, 0x31, 0x61 }, + { REQ_07_SET_GET_AVREG, 0x32, 0x74 }, + { REQ_07_SET_GET_AVREG, 0x33, 0x1c }, + { REQ_07_SET_GET_AVREG, 0x34, 0x74 }, + { REQ_07_SET_GET_AVREG, 0x35, 0x1c }, + { REQ_07_SET_GET_AVREG, 0x36, 0x7a }, + { REQ_07_SET_GET_AVREG, 0x37, 0x26 }, + { REQ_07_SET_GET_AVREG, 0x38, 0x40 }, + { REQ_07_SET_GET_AVREG, 0x39, 0x0a }, + { REQ_07_SET_GET_AVREG, 0x42, 0x55 }, + { REQ_07_SET_GET_AVREG, 0x51, 0x11 }, + { REQ_07_SET_GET_AVREG, 0x55, 0x01 }, + { REQ_07_SET_GET_AVREG, 0x57, 0x02 }, + { REQ_07_SET_GET_AVREG, 0x58, 0x35 }, + { REQ_07_SET_GET_AVREG, 0x59, 0xa0 }, + { REQ_07_SET_GET_AVREG, 0x80, 0x15 }, + { REQ_07_SET_GET_AVREG, 0x82, 0x42 }, + { REQ_07_SET_GET_AVREG, 0xc1, 0xd0 }, + { REQ_07_SET_GET_AVREG, 0xc3, 0x88 }, + { REQ_07_SET_GET_AVREG, 0x3f, 0x00 }, /* End of the soft reset */ + { REQ_05_SET_GET_USBREG, 0x18, 0x00 }, +}; + +struct reg_init tm6010_init_tab[] = { + { REQ_07_SET_GET_AVREG, 0xc0, 0x00 }, + { REQ_07_SET_GET_AVREG, 0xc4, 0xa0 }, + { REQ_07_SET_GET_AVREG, 0xc6, 0x40 }, + { REQ_07_SET_GET_AVREG, 0xca, 0x31 }, + { REQ_07_SET_GET_AVREG, 0xcc, 0xe1 }, + { REQ_07_SET_GET_AVREG, 0xe0, 0x03 }, + { REQ_07_SET_GET_AVREG, 0xfe, 0x7f }, + + { REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf0 }, + { REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xf4 }, + { REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf8 }, + { REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x00 }, + { REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf2 }, + { REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xf0 }, + { REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2 }, + { REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x60 }, + { REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfc }, + + { REQ_07_SET_GET_AVREG, 0x3f, 0x01 }, + { REQ_07_SET_GET_AVREG, 0x00, 0x00 }, + { REQ_07_SET_GET_AVREG, 0x01, 0x07 }, + { REQ_07_SET_GET_AVREG, 0x02, 0x5f }, + { REQ_07_SET_GET_AVREG, 0x03, 0x00 }, + { REQ_07_SET_GET_AVREG, 0x05, 0x64 }, + { REQ_07_SET_GET_AVREG, 0x07, 0x01 }, + { REQ_07_SET_GET_AVREG, 0x08, 0x82 }, + { REQ_07_SET_GET_AVREG, 0x09, 0x36 }, + { REQ_07_SET_GET_AVREG, 0x0a, 0x50 }, + { REQ_07_SET_GET_AVREG, 0x0c, 0x6a }, + { REQ_07_SET_GET_AVREG, 0x11, 0xc9 }, + { REQ_07_SET_GET_AVREG, 0x12, 0x07 }, + { REQ_07_SET_GET_AVREG, 0x13, 0x3b }, + { REQ_07_SET_GET_AVREG, 0x14, 0x47 }, + { REQ_07_SET_GET_AVREG, 0x15, 0x6f }, + { REQ_07_SET_GET_AVREG, 0x17, 0xcd }, + { REQ_07_SET_GET_AVREG, 0x18, 0x1e }, + { REQ_07_SET_GET_AVREG, 0x19, 0x8b }, + { REQ_07_SET_GET_AVREG, 0x1a, 0xa2 }, + { REQ_07_SET_GET_AVREG, 0x1b, 0xe9 }, + { REQ_07_SET_GET_AVREG, 0x1c, 0x1c }, + { REQ_07_SET_GET_AVREG, 0x1d, 0xcc }, + { REQ_07_SET_GET_AVREG, 0x1e, 0xcc }, + { REQ_07_SET_GET_AVREG, 0x1f, 0xcd }, + { REQ_07_SET_GET_AVREG, 0x20, 0x3c }, + { REQ_07_SET_GET_AVREG, 0x21, 0x3c }, + { REQ_07_SET_GET_AVREG, 0x2d, 0x48 }, + { REQ_07_SET_GET_AVREG, 0x2e, 0x88 }, + { REQ_07_SET_GET_AVREG, 0x30, 0x22 }, + { REQ_07_SET_GET_AVREG, 0x31, 0x61 }, + { REQ_07_SET_GET_AVREG, 0x32, 0x74 }, + { REQ_07_SET_GET_AVREG, 0x33, 0x1c }, + { REQ_07_SET_GET_AVREG, 0x34, 0x74 }, + { REQ_07_SET_GET_AVREG, 0x35, 0x1c }, + { REQ_07_SET_GET_AVREG, 0x36, 0x7a }, + { REQ_07_SET_GET_AVREG, 0x37, 0x26 }, + { REQ_07_SET_GET_AVREG, 0x38, 0x40 }, + { REQ_07_SET_GET_AVREG, 0x39, 0x0a }, + { REQ_07_SET_GET_AVREG, 0x42, 0x55 }, + { REQ_07_SET_GET_AVREG, 0x51, 0x11 }, + { REQ_07_SET_GET_AVREG, 0x55, 0x01 }, + { REQ_07_SET_GET_AVREG, 0x57, 0x02 }, + { REQ_07_SET_GET_AVREG, 0x58, 0x35 }, + { REQ_07_SET_GET_AVREG, 0x59, 0xa0 }, + { REQ_07_SET_GET_AVREG, 0x80, 0x15 }, + { REQ_07_SET_GET_AVREG, 0x82, 0x42 }, + { REQ_07_SET_GET_AVREG, 0xc1, 0xd0 }, + { REQ_07_SET_GET_AVREG, 0xc3, 0x88 }, + { REQ_07_SET_GET_AVREG, 0x3f, 0x00 }, + + { REQ_05_SET_GET_USBREG, 0x18, 0x00 }, + + /* set remote wakeup key:any key wakeup */ + { REQ_07_SET_GET_AVREG, 0xe5, 0xfe }, + { REQ_07_SET_GET_AVREG, 0xda, 0xff }, +}; + +int tm6000_init (struct tm6000_core *dev) +{ + int board, rc=0, i, size; + struct reg_init *tab; + + if (dev->dev_type == TM6010) { + tab = tm6010_init_tab; + size = ARRAY_SIZE(tm6010_init_tab); + } else { + tab = tm6000_init_tab; + size = ARRAY_SIZE(tm6000_init_tab); + } + + /* Load board's initialization table */ + for (i=0; i< size; i++) { + rc= tm6000_set_reg (dev, tab[i].req, tab[i].reg, tab[i].val); + if (rc<0) { + printk (KERN_ERR "Error %i while setting req %d, " + "reg %d to value %d\n", rc, + tab[i].req,tab[i].reg, tab[i].val); + return rc; + } + } + + msleep(5); /* Just to be conservative */ + + /* Check board version - maybe 10Moons specific */ + board=tm6000_get_reg16 (dev, 0x40, 0, 0); + if (board >=0) { + printk (KERN_INFO "Board version = 0x%04x\n",board); + } else { + printk (KERN_ERR "Error %i while retrieving board version\n",board); + } + + if (dev->dev_type == TM6010) { + /* Turn xceive 3028 on */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_3, 0x01); + msleep(11); + } + + /* Reset GPIO1 and GPIO4. */ + for (i=0; i< 2; i++) { + rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->tuner_reset_gpio, 0x00); + if (rc<0) { + printk (KERN_ERR "Error %i doing GPIO1 reset\n",rc); + return rc; + } + + msleep(10); /* Just to be conservative */ + rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->tuner_reset_gpio, 0x01); + if (rc<0) { + printk (KERN_ERR "Error %i doing GPIO1 reset\n",rc); + return rc; + } + + msleep(10); + rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_4, 0); + if (rc<0) { + printk (KERN_ERR "Error %i doing GPIO4 reset\n",rc); + return rc; + } + + msleep(10); + rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_4, 1); + if (rc<0) { + printk (KERN_ERR "Error %i doing GPIO4 reset\n",rc); + return rc; + } + + if (!i) { + rc=tm6000_get_reg16(dev, 0x40,0,0); + if (rc>=0) { + printk ("board=%d\n", rc); + } + } + } + + msleep(50); + + return 0; +} + +int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate) +{ + int val; + + val=tm6000_get_reg (dev, REQ_07_SET_GET_AVREG, 0xeb, 0x0); +printk("Original value=%d\n",val); + if (val<0) + return val; + + val &= 0x0f; /* Preserve the audio input control bits */ + switch (bitrate) { + case 44100: + val|=0xd0; + dev->audio_bitrate=bitrate; + break; + case 48000: + val|=0x60; + dev->audio_bitrate=bitrate; + break; + } + val=tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0xeb, val); + + return val; +} +EXPORT_SYMBOL_GPL(tm6000_set_audio_bitrate); diff --git a/linux/drivers/staging/tm6000/tm6000-dvb.c b/linux/drivers/staging/tm6000/tm6000-dvb.c new file mode 100644 index 000000000..8b117b3f5 --- /dev/null +++ b/linux/drivers/staging/tm6000/tm6000-dvb.c @@ -0,0 +1,326 @@ +/* + tm6000-dvb.c - dvb-t support for TM5600/TM6000 USB video capture devices + + Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation version 2 + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/usb.h> + +#include "tm6000.h" +#include "tm6000-regs.h" + +#include "hack.h" + +#include "zl10353.h" + +#include <media/tuner.h> + +#include "tuner-xc2028.h" + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) +static void tm6000_urb_received(struct urb *urb, struct pt_regs *ptregs) +#else +static void tm6000_urb_received(struct urb *urb) +#endif +{ + int ret; + struct tm6000_core* dev = urb->context; + + if(urb->status != 0){ + printk(KERN_ERR "tm6000: status != 0\n"); + } + else if(urb->actual_length>0){ + dvb_dmx_swfilter(&dev->dvb->demux, urb->transfer_buffer, + urb->actual_length); + } + + if(dev->dvb->streams > 0) { + ret = usb_submit_urb(urb, GFP_ATOMIC); + if(ret < 0) { + printk(KERN_ERR "tm6000: error %s\n", __FUNCTION__); + kfree(urb->transfer_buffer); + usb_free_urb(urb); + } + } +} + +int tm6000_start_stream(struct tm6000_core *dev) +{ + int ret; + unsigned int pipe, maxPaketSize; + struct tm6000_dvb *dvb = dev->dvb; + + printk(KERN_INFO "tm6000: got start stream request %s\n",__FUNCTION__); + + tm6000_init_digital_mode(dev); + +/* + ret = tm6000_set_led_status(tm6000_dev, 0x1); + if(ret < 0) { + return -1; + } +*/ + + dvb->bulk_urb = usb_alloc_urb(0, GFP_KERNEL); + if(dvb->bulk_urb == NULL) { + printk(KERN_ERR "tm6000: couldn't allocate urb\n"); + return -ENOMEM; + } + + maxPaketSize = dev->bulk_in->desc.wMaxPacketSize; + + dvb->bulk_urb->transfer_buffer = kzalloc(maxPaketSize, GFP_KERNEL); + if(dvb->bulk_urb->transfer_buffer == NULL) { + usb_free_urb(dvb->bulk_urb); + printk(KERN_ERR "tm6000: couldn't allocate transfer buffer!\n"); + return -ENOMEM; + } + + pipe = usb_rcvbulkpipe(dev->udev, dev->bulk_in->desc.bEndpointAddress + & USB_ENDPOINT_NUMBER_MASK); + + usb_fill_bulk_urb(dvb->bulk_urb, dev->udev, pipe, + dvb->bulk_urb->transfer_buffer, + maxPaketSize, + tm6000_urb_received, dev); + + ret = usb_set_interface(dev->udev, 0, 1); + if(ret < 0) { + printk(KERN_ERR "tm6000: error %i in %s during set interface\n", ret, __FUNCTION__); + return ret; + } + + ret = usb_clear_halt(dev->udev, pipe); + if(ret < 0) { + printk(KERN_ERR "tm6000: error %i in %s during pipe reset\n",ret,__FUNCTION__); + return ret; + } + else { + printk(KERN_ERR "tm6000: pipe resetted\n"); + } + +// mutex_lock(&tm6000_driver.open_close_mutex); + ret = usb_submit_urb(dvb->bulk_urb, GFP_KERNEL); + + +// mutex_unlock(&tm6000_driver.open_close_mutex); + if (ret) { + printk(KERN_ERR "tm6000: submit of urb failed (error=%i)\n",ret); + + kfree(dvb->bulk_urb->transfer_buffer); + usb_free_urb(dvb->bulk_urb); + return ret; + } + + return 0; +} + +void tm6000_stop_stream(struct tm6000_core *dev) +{ + int ret; + struct tm6000_dvb *dvb = dev->dvb; + +// tm6000_set_led_status(tm6000_dev, 0x0); + + ret = usb_set_interface(dev->udev, 0, 0); + if(ret < 0) { + printk(KERN_ERR "tm6000: error %i in %s during set interface\n",ret,__FUNCTION__); + } + + if(dvb->bulk_urb) { + usb_kill_urb(dvb->bulk_urb); + kfree(dvb->bulk_urb->transfer_buffer); + usb_free_urb(dvb->bulk_urb); + dvb->bulk_urb = NULL; + } +} + +int tm6000_start_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct tm6000_core *dev = demux->priv; + struct tm6000_dvb *dvb = dev->dvb; + printk(KERN_INFO "tm6000: got start feed request %s\n",__FUNCTION__); + + mutex_lock(&dvb->mutex); + if(dvb->streams == 0) { + dvb->streams = 1; +// mutex_init(&tm6000_dev->streaming_mutex); + tm6000_start_stream(dev); + } + else { + ++(dvb->streams); + } + mutex_unlock(&dvb->mutex); + + return 0; +} + +int tm6000_stop_feed(struct dvb_demux_feed *feed) { + struct dvb_demux *demux = feed->demux; + struct tm6000_core *dev = demux->priv; + struct tm6000_dvb *dvb = dev->dvb; + + printk(KERN_INFO "tm6000: got stop feed request %s\n",__FUNCTION__); + + mutex_lock(&dvb->mutex); + --dvb->streams; + + if(0 == dvb->streams) { + tm6000_stop_stream(dev); +// mutex_destroy(&tm6000_dev->streaming_mutex); + } + mutex_unlock(&dvb->mutex); +// mutex_destroy(&tm6000_dev->streaming_mutex); + + return 0; +} + +int tm6000_dvb_attach_frontend(struct tm6000_core *dev) +{ + struct tm6000_dvb *dvb = dev->dvb; + + if(dev->caps.has_zl10353) { + struct zl10353_config config = + {.demod_address = dev->demod_addr >> 1, + .no_tuner = 1, +// .input_frequency = 0x19e9, +// .r56_agc_targets = 0x1c, + }; + + dvb->frontend = pseudo_zl10353_attach(dev, &config, + &dev->i2c_adap); + } + else { + printk(KERN_ERR "tm6000: no frontend defined for the device!\n"); + return -1; + } + + return (!dvb->frontend) ? -1 : 0; +} + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +int tm6000_dvb_register(struct tm6000_core *dev) +{ + int ret = -1; + struct tm6000_dvb *dvb = dev->dvb; + + mutex_init(&dvb->mutex); + + dvb->streams = 0; + + /* attach the frontend */ + ret = tm6000_dvb_attach_frontend(dev); + if(ret < 0) { + printk(KERN_ERR "tm6000: couldn't attach the frontend!\n"); + goto err; + } + + ret = dvb_register_adapter(&dvb->adapter, "Trident TVMaster 6000 DVB-T", + THIS_MODULE, &dev->udev->dev, adapter_nr); + dvb->adapter.priv = dev; + + if (dvb->frontend) { + struct xc2028_config cfg = { + .i2c_adap = &dev->i2c_adap, + .i2c_addr = dev->tuner_addr, + }; + + ret = dvb_register_frontend(&dvb->adapter, dvb->frontend); + if (ret < 0) { + printk(KERN_ERR + "tm6000: couldn't register frontend\n"); + goto adapter_err; + } + + if (!dvb_attach(xc2028_attach, dvb->frontend, &cfg)) { + printk(KERN_ERR "tm6000: couldn't register " + "frontend (xc3028)\n"); + ret = -EINVAL; + goto frontend_err; + } + printk(KERN_INFO "tm6000: XC2028/3028 asked to be " + "attached to frontend!\n"); + } else { + printk(KERN_ERR "tm6000: no frontend found\n"); + } + + dvb->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING + | DMX_MEMORY_BASED_FILTERING; + dvb->demux.priv = dev; + dvb->demux.filternum = 256; + dvb->demux.feednum = 256; + dvb->demux.start_feed = tm6000_start_feed; + dvb->demux.stop_feed = tm6000_stop_feed; + dvb->demux.write_to_decoder = NULL; + ret = dvb_dmx_init(&dvb->demux); + if(ret < 0) { + printk("tm6000: dvb_dmx_init failed (errno = %d)\n", ret); + goto frontend_err; + } + + dvb->dmxdev.filternum = dev->dvb->demux.filternum; + dvb->dmxdev.demux = &dev->dvb->demux.dmx; + dvb->dmxdev.capabilities = 0; + + ret = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter); + if(ret < 0) { + printk("tm6000: dvb_dmxdev_init failed (errno = %d)\n", ret); + goto dvb_dmx_err; + } + + return 0; + +dvb_dmx_err: + dvb_dmx_release(&dvb->demux); +frontend_err: + if(dvb->frontend) { + dvb_frontend_detach(dvb->frontend); + dvb_unregister_frontend(dvb->frontend); + } +adapter_err: + dvb_unregister_adapter(&dvb->adapter); +err: + return ret; +} + +void tm6000_dvb_unregister(struct tm6000_core *dev) +{ + struct tm6000_dvb *dvb = dev->dvb; + + if(dvb->bulk_urb != NULL) { + struct urb *bulk_urb = dvb->bulk_urb; + + kfree(bulk_urb->transfer_buffer); + bulk_urb->transfer_buffer = NULL; + usb_unlink_urb(bulk_urb); + usb_free_urb(bulk_urb); + } + +// mutex_lock(&tm6000_driver.open_close_mutex); + if(dvb->frontend) { + dvb_frontend_detach(dvb->frontend); + dvb_unregister_frontend(dvb->frontend); + } + + dvb_dmxdev_release(&dvb->dmxdev); + dvb_dmx_release(&dvb->demux); + dvb_unregister_adapter(&dvb->adapter); + mutex_destroy(&dvb->mutex); +// mutex_unlock(&tm6000_driver.open_close_mutex); + +} diff --git a/linux/drivers/staging/tm6000/tm6000-i2c.c b/linux/drivers/staging/tm6000/tm6000-i2c.c new file mode 100644 index 000000000..818c553b6 --- /dev/null +++ b/linux/drivers/staging/tm6000/tm6000-i2c.c @@ -0,0 +1,255 @@ +/* + tm6000-i2c.c - driver for TM5600/TM6000 USB video capture devices + + Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org> + + Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com> + - Fix SMBus Read Byte command + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation version 2 + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/usb.h> +#include <linux/i2c.h> + +#include "compat.h" +#include "tm6000.h" +#include "tm6000-regs.h" +#include <media/v4l2-common.h> +#include <media/tuner.h> +#include "tuner-xc2028.h" + + +/*FIXME: Hack to avoid needing to patch i2c-id.h */ +#define I2C_HW_B_TM6000 I2C_HW_B_EM28XX +/* ----------------------------------------------------------- */ + +static unsigned int i2c_debug = 0; +module_param(i2c_debug, int, 0644); +MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); + +#define i2c_dprintk(lvl,fmt, args...) if (i2c_debug>=lvl) do{ \ + printk(KERN_DEBUG "%s at %s: " fmt, \ + dev->name, __FUNCTION__ , ##args); } while (0) + +static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msgs[], int num) +{ + struct tm6000_core *dev = i2c_adap->algo_data; + int addr, rc, i, byte; + + if (num <= 0) + return 0; + for (i = 0; i < num; i++) { + addr = (msgs[i].addr << 1) & 0xff; + i2c_dprintk(2,"%s %s addr=0x%x len=%d:", + (msgs[i].flags & I2C_M_RD) ? "read" : "write", + i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len); + if (msgs[i].flags & I2C_M_RD) { + /* read request without preceding register selection */ + /* + * The TM6000 only supports a read transaction + * immediately after a 1 or 2 byte write to select + * a register. We cannot fulfil this request. + */ + i2c_dprintk(2, " read without preceding write not" + " supported"); + rc = -EOPNOTSUPP; + goto err; + } else if (i + 1 < num && msgs[i].len <= 2 && + (msgs[i + 1].flags & I2C_M_RD) && + msgs[i].addr == msgs[i + 1].addr) { + /* 1 or 2 byte write followed by a read */ + if (i2c_debug >= 2) + for (byte = 0; byte < msgs[i].len; byte++) + printk(" %02x", msgs[i].buf[byte]); + i2c_dprintk(2, "; joined to read %s len=%d:", + i == num - 2 ? "stop" : "nonstop", + msgs[i + 1].len); + rc = tm6000_read_write_usb (dev, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + msgs[i].len == 1 ? REQ_16_SET_GET_I2C_WR1_RDN + : REQ_14_SET_GET_I2C_WR2_RDN, + addr | msgs[i].buf[0] << 8, + msgs[i].len == 1 ? 0 : msgs[i].buf[1], + msgs[i + 1].buf, msgs[i + 1].len); + i++; + if (i2c_debug >= 2) + for (byte = 0; byte < msgs[i].len; byte++) + printk(" %02x", msgs[i].buf[byte]); + } else { + /* write bytes */ + if (i2c_debug >= 2) + for (byte = 0; byte < msgs[i].len; byte++) + printk(" %02x", msgs[i].buf[byte]); + rc = tm6000_read_write_usb(dev, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + REQ_16_SET_GET_I2C_WR1_RDN, + addr | msgs[i].buf[0] << 8, 0, + msgs[i].buf + 1, msgs[i].len - 1); + } + if (i2c_debug >= 2) + printk("\n"); + if (rc < 0) + goto err; + } + + return num; +err: + i2c_dprintk(2," ERROR: %i\n", rc); + return rc; +} + +static int tm6000_i2c_eeprom(struct tm6000_core *dev, + unsigned char *eedata, int len) +{ + int i, rc; + unsigned char *p = eedata; + unsigned char bytes[17]; + + dev->i2c_client.addr = 0xa0 >> 1; + + bytes[16] = '\0'; + for (i = 0; i < len; ) { +#if 0 + rc = i2c_master_recv(&dev->i2c_client, p, 1); +#else + *p = i; + rc = tm6000_read_write_usb (dev, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + REQ_16_SET_GET_I2C_WR1_RDN, 0xa0 | i<<8, 0, p, 1); +#endif + if (rc < 1) { + if (p == eedata) + goto noeeprom; + else { + printk(KERN_WARNING + "%s: i2c eeprom read error (err=%d)\n", + dev->name, rc); + } + return -1; + } + p++; + if (0 == (i % 16)) + printk(KERN_INFO "%s: i2c eeprom %02x:", dev->name, i); + printk(" %02x", eedata[i]); + if ((eedata[i] >= ' ') && (eedata[i] <= 'z')) { + bytes[i%16] = eedata[i]; + } else { + bytes[i%16]='.'; + } + + i++; + + if (0 == (i % 16)) { + bytes[16] = '\0'; + printk(" %s\n", bytes); + } + } + if (0 != (i%16)) { + bytes[i%16] = '\0'; + for (i %= 16; i < 16; i++) + printk(" "); + } + printk(" %s\n", bytes); + + return 0; + +noeeprom: + printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n", + dev->name, rc); + return rc; +} + +/* ----------------------------------------------------------- */ + +/* + * functionality() + */ +static u32 functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_SMBUS_EMUL; +} + +#define mass_write(addr, reg, data...) \ + { const static u8 _val[] = data; \ + rc=tm6000_read_write_usb(dev,USB_DIR_OUT | USB_TYPE_VENDOR, \ + REQ_16_SET_GET_I2C_WR1_RDN,(reg<<8)+addr, 0x00, (u8 *) _val, \ + ARRAY_SIZE(_val)); \ + if (rc<0) { \ + printk(KERN_ERR "Error on line %d: %d\n",__LINE__,rc); \ + return rc; \ + } \ + msleep (10); \ + } + +static struct i2c_algorithm tm6000_algo = { + .master_xfer = tm6000_i2c_xfer, + .functionality = functionality, +}; + +static struct i2c_adapter tm6000_adap_template = { + .owner = THIS_MODULE, +#ifdef I2C_CLASS_TV_ANALOG + .class = I2C_CLASS_TV_ANALOG, +#endif + .name = "tm6000", + .id = I2C_HW_B_TM6000, + .algo = &tm6000_algo, +}; + +static struct i2c_client tm6000_client_template = { + .name = "tm6000 internal", +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15) + .flags = I2C_CLIENT_ALLOW_USE, +#endif +}; + +/* ----------------------------------------------------------- */ + +/* + * tm6000_i2c_register() + * register i2c bus + */ +int tm6000_i2c_register(struct tm6000_core *dev) +{ + unsigned char eedata[256]; + + dev->i2c_adap = tm6000_adap_template; + dev->i2c_adap.dev.parent = &dev->udev->dev; + strcpy(dev->i2c_adap.name, dev->name); + dev->i2c_adap.algo_data = dev; + i2c_add_adapter(&dev->i2c_adap); + + dev->i2c_client = tm6000_client_template; + dev->i2c_client.adapter = &dev->i2c_adap; + + i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev); + + tm6000_i2c_eeprom(dev, eedata, sizeof(eedata)); + + return 0; +} + +/* + * tm6000_i2c_unregister() + * unregister i2c_bus + */ +int tm6000_i2c_unregister(struct tm6000_core *dev) +{ + i2c_del_adapter(&dev->i2c_adap); + return 0; +} diff --git a/linux/drivers/staging/tm6000/tm6000-regs.h b/linux/drivers/staging/tm6000/tm6000-regs.h new file mode 100644 index 000000000..85acc07f6 --- /dev/null +++ b/linux/drivers/staging/tm6000/tm6000-regs.h @@ -0,0 +1,86 @@ +/* + tm6000-regs.h - driver for TM5600/TM6000 USB video capture devices + + Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation version 2 + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * Define TV Master TM5600/TM6000 Request codes + */ +#define REQ_00_SET_IR_VALUE 0 +#define REQ_01_SET_WAKEUP_IRCODE 1 +#define REQ_02_GET_IR_CODE 2 +#define REQ_03_SET_GET_MCU_PIN 3 +#define REQ_04_EN_DISABLE_MCU_INT 4 +#define REQ_05_SET_GET_USBREG 5 + /* Write: RegNum, Value, 0 */ + /* Read : RegNum, Value, 1, RegStatus */ +#define REQ_06_SET_GET_USBREG_BIT 6 +#define REQ_07_SET_GET_AVREG 7 + /* Write: RegNum, Value, 0 */ + /* Read : RegNum, Value, 1, RegStatus */ +#define REQ_08_SET_GET_AVREG_BIT 8 +#define REQ_09_SET_GET_TUNER_FQ 9 +#define REQ_10_SET_TUNER_SYSTEM 10 +#define REQ_11_SET_EEPROM_ADDR 11 +#define REQ_12_SET_GET_EEPROMBYTE 12 +#define REQ_13_GET_EEPROM_SEQREAD 13 +#define REQ_14_SET_GET_I2C_WR2_RDN 14 +#define REQ_15_SET_GET_I2CBYTE 15 + /* Write: Subaddr, Slave Addr, value, 0 */ + /* Read : Subaddr, Slave Addr, value, 1 */ +#define REQ_16_SET_GET_I2C_WR1_RDN 16 + /* Subaddr, Slave Addr, 0, length */ +#define REQ_17_SET_GET_I2CFP 17 + /* Write: Slave Addr, register, value */ + /* Read : Slave Addr, register, 2, data */ + +/* + * Define TV Master TM5600/TM6000 GPIO lines + */ + +#define TM6000_GPIO_CLK 0x101 +#define TM6000_GPIO_DATA 0x100 + +#define TM6000_GPIO_1 0x102 +#define TM6000_GPIO_2 0x103 +#define TM6000_GPIO_3 0x104 +#define TM6000_GPIO_4 0x300 +#define TM6000_GPIO_5 0x301 +#define TM6000_GPIO_6 0x304 +#define TM6000_GPIO_7 0x305 + +/* tm6010 defines GPIO with different values */ +#define TM6010_GPIO_0 0x0102 +#define TM6010_GPIO_1 0x0103 +#define TM6010_GPIO_2 0x0104 +#define TM6010_GPIO_3 0x0105 +#define TM6010_GPIO_4 0x0106 +#define TM6010_GPIO_5 0x0107 +#define TM6010_GPIO_6 0x0300 +#define TM6010_GPIO_7 0x0301 +#define TM6010_GPIO_9 0x0305 +/* + * Define TV Master TM5600/TM6000 URB message codes and length + */ + +enum { + TM6000_URB_MSG_VIDEO=1, + TM6000_URB_MSG_AUDIO, + TM6000_URB_MSG_VBI, + TM6000_URB_MSG_PTS, + TM6000_URB_MSG_ERR, +}; diff --git a/linux/drivers/staging/tm6000/tm6000-stds.c b/linux/drivers/staging/tm6000/tm6000-stds.c new file mode 100644 index 000000000..c56444fb8 --- /dev/null +++ b/linux/drivers/staging/tm6000/tm6000-stds.c @@ -0,0 +1,898 @@ +/* + tm6000-stds.c - driver for TM5600/TM6000 USB video capture devices + + Copyright (C) 2007 Mauro Carvalho Chehab <mchehab@redhat.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation version 2 + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include "compat.h" +#include "tm6000.h" +#include "tm6000-regs.h" + +struct tm6000_reg_settings { + unsigned char req; + unsigned char reg; + unsigned char value; +}; + +struct tm6000_std_tv_settings { + v4l2_std_id id; + struct tm6000_reg_settings sif[12]; + struct tm6000_reg_settings nosif[12]; + struct tm6000_reg_settings common[25]; +}; + +struct tm6000_std_settings { + v4l2_std_id id; + struct tm6000_reg_settings common[37]; +}; + +static struct tm6000_std_tv_settings tv_stds[] = { + { + .id = V4L2_STD_PAL_M, + .sif = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf2}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xf8}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf3}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x08}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf1}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe8}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x62}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfe}, + {REQ_07_SET_GET_AVREG, 0xfe, 0xcb}, + {0, 0, 0}, + }, + .nosif = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xf8}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf3}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x0f}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf1}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe8}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x60}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfc}, + {REQ_07_SET_GET_AVREG, 0xfe, 0x8b}, + {0, 0, 0}, + }, + .common = { + {REQ_07_SET_GET_AVREG, 0x3f, 0x01}, + {REQ_07_SET_GET_AVREG, 0x00, 0x04}, + {REQ_07_SET_GET_AVREG, 0x01, 0x0e}, + {REQ_07_SET_GET_AVREG, 0x02, 0x5f}, + {REQ_07_SET_GET_AVREG, 0x03, 0x00}, + {REQ_07_SET_GET_AVREG, 0x07, 0x01}, + {REQ_07_SET_GET_AVREG, 0x18, 0x1e}, + {REQ_07_SET_GET_AVREG, 0x19, 0x83}, + {REQ_07_SET_GET_AVREG, 0x1a, 0x0a}, + {REQ_07_SET_GET_AVREG, 0x1b, 0xe0}, + {REQ_07_SET_GET_AVREG, 0x1c, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x1d, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1e, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1f, 0xcd}, + {REQ_07_SET_GET_AVREG, 0x2e, 0x88}, + {REQ_07_SET_GET_AVREG, 0x30, 0x20}, + {REQ_07_SET_GET_AVREG, 0x31, 0x61}, + {REQ_07_SET_GET_AVREG, 0x33, 0x0c}, + {REQ_07_SET_GET_AVREG, 0x35, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x82, 0x52}, + {REQ_07_SET_GET_AVREG, 0x83, 0x6F}, + + {REQ_07_SET_GET_AVREG, 0x04, 0xdc}, + {REQ_07_SET_GET_AVREG, 0x0d, 0x07}, + {REQ_07_SET_GET_AVREG, 0x3f, 0x00}, + {0, 0, 0}, + }, + }, { + .id = V4L2_STD_PAL_Nc, + .sif = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf2}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xf8}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf3}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x08}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf1}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe8}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x62}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfe}, + {REQ_07_SET_GET_AVREG, 0xfe, 0xcb}, + {0, 0, 0}, + }, + .nosif = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xf8}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf3}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x0f}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf1}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe8}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x60}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfc}, + {REQ_07_SET_GET_AVREG, 0xfe, 0x8b}, + {0, 0, 0}, + }, + .common = { + {REQ_07_SET_GET_AVREG, 0x3f, 0x01}, + {REQ_07_SET_GET_AVREG, 0x00, 0x36}, + {REQ_07_SET_GET_AVREG, 0x01, 0x0e}, + {REQ_07_SET_GET_AVREG, 0x02, 0x5f}, + {REQ_07_SET_GET_AVREG, 0x03, 0x02}, + {REQ_07_SET_GET_AVREG, 0x07, 0x01}, + {REQ_07_SET_GET_AVREG, 0x18, 0x1e}, + {REQ_07_SET_GET_AVREG, 0x19, 0x91}, + {REQ_07_SET_GET_AVREG, 0x1a, 0x1f}, + {REQ_07_SET_GET_AVREG, 0x1b, 0x0c}, + {REQ_07_SET_GET_AVREG, 0x1c, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x1d, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1e, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1f, 0xcd}, + {REQ_07_SET_GET_AVREG, 0x2e, 0x8c}, + {REQ_07_SET_GET_AVREG, 0x30, 0x2c}, + {REQ_07_SET_GET_AVREG, 0x31, 0xc1}, + {REQ_07_SET_GET_AVREG, 0x33, 0x0c}, + {REQ_07_SET_GET_AVREG, 0x35, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x82, 0x52}, + {REQ_07_SET_GET_AVREG, 0x83, 0x6F}, + + {REQ_07_SET_GET_AVREG, 0x04, 0xdc}, + {REQ_07_SET_GET_AVREG, 0x0d, 0x07}, + {REQ_07_SET_GET_AVREG, 0x3f, 0x00}, + {0, 0, 0}, + }, + }, { + .id = V4L2_STD_PAL, + .sif = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf2}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xf8}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf3}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x08}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf1}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe8}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x62}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfe}, + {REQ_07_SET_GET_AVREG, 0xfe, 0xcb}, + {0, 0, 0} + }, + .nosif = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xf8}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf3}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x0f}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf1}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe8}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x60}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfc}, + {REQ_07_SET_GET_AVREG, 0xfe, 0x8b}, + {0, 0, 0}, + }, + .common = { + {REQ_07_SET_GET_AVREG, 0x3f, 0x01}, + {REQ_07_SET_GET_AVREG, 0x00, 0x32}, + {REQ_07_SET_GET_AVREG, 0x01, 0x0e}, + {REQ_07_SET_GET_AVREG, 0x02, 0x5f}, + {REQ_07_SET_GET_AVREG, 0x03, 0x02}, + {REQ_07_SET_GET_AVREG, 0x07, 0x01}, + {REQ_07_SET_GET_AVREG, 0x18, 0x25}, + {REQ_07_SET_GET_AVREG, 0x19, 0xd5}, + {REQ_07_SET_GET_AVREG, 0x1a, 0x63}, + {REQ_07_SET_GET_AVREG, 0x1b, 0x50}, + {REQ_07_SET_GET_AVREG, 0x1c, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x1d, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1e, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1f, 0xcd}, + {REQ_07_SET_GET_AVREG, 0x2e, 0x8c}, + {REQ_07_SET_GET_AVREG, 0x30, 0x2c}, + {REQ_07_SET_GET_AVREG, 0x31, 0xc1}, + {REQ_07_SET_GET_AVREG, 0x33, 0x0c}, + {REQ_07_SET_GET_AVREG, 0x35, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x82, 0x52}, + {REQ_07_SET_GET_AVREG, 0x83, 0x6F}, + + {REQ_07_SET_GET_AVREG, 0x04, 0xdc}, + {REQ_07_SET_GET_AVREG, 0x0d, 0x07}, + {REQ_07_SET_GET_AVREG, 0x3f, 0x00}, + {0, 0, 0}, + }, + }, { + .id = V4L2_STD_SECAM, + .sif = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf2}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xf8}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf3}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x08}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf1}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe8}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x62}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfe}, + {REQ_07_SET_GET_AVREG, 0xfe, 0xcb}, + {0, 0, 0}, + }, + .nosif = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xf8}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf3}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x0f}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf1}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe8}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x60}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfc}, + {REQ_07_SET_GET_AVREG, 0xfe, 0x8b}, + {0, 0, 0}, + }, + .common = { + {REQ_07_SET_GET_AVREG, 0x3f, 0x01}, + {REQ_07_SET_GET_AVREG, 0x00, 0x38}, + {REQ_07_SET_GET_AVREG, 0x01, 0x0e}, + {REQ_07_SET_GET_AVREG, 0x02, 0x5f}, + {REQ_07_SET_GET_AVREG, 0x03, 0x02}, + {REQ_07_SET_GET_AVREG, 0x07, 0x01}, + {REQ_07_SET_GET_AVREG, 0x18, 0x24}, + {REQ_07_SET_GET_AVREG, 0x19, 0x92}, + {REQ_07_SET_GET_AVREG, 0x1a, 0xe8}, + {REQ_07_SET_GET_AVREG, 0x1b, 0xed}, + {REQ_07_SET_GET_AVREG, 0x1c, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x1d, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1e, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1f, 0xcd}, + {REQ_07_SET_GET_AVREG, 0x2e, 0x8c}, + {REQ_07_SET_GET_AVREG, 0x30, 0x2c}, + {REQ_07_SET_GET_AVREG, 0x31, 0xc1}, + {REQ_07_SET_GET_AVREG, 0x33, 0x2c}, + {REQ_07_SET_GET_AVREG, 0x35, 0x18}, + {REQ_07_SET_GET_AVREG, 0x82, 0x42}, + {REQ_07_SET_GET_AVREG, 0x83, 0xFF}, + + {REQ_07_SET_GET_AVREG, 0x0d, 0x07}, + {REQ_07_SET_GET_AVREG, 0x3f, 0x00}, + {0, 0, 0}, + }, + }, { + .id = V4L2_STD_NTSC, + .sif = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf2}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xf8}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf3}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x08}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf1}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe8}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x62}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfe}, + {REQ_07_SET_GET_AVREG, 0xfe, 0xcb}, + {0, 0, 0}, + }, + .nosif = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xf8}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf3}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x0f}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf1}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe8}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x60}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfc}, + {REQ_07_SET_GET_AVREG, 0xfe, 0x8b}, + {0, 0, 0}, + }, + .common = { + {REQ_07_SET_GET_AVREG, 0x3f, 0x01}, + {REQ_07_SET_GET_AVREG, 0x00, 0x00}, + {REQ_07_SET_GET_AVREG, 0x01, 0x0f}, + {REQ_07_SET_GET_AVREG, 0x02, 0x5f}, + {REQ_07_SET_GET_AVREG, 0x03, 0x00}, + {REQ_07_SET_GET_AVREG, 0x07, 0x01}, + {REQ_07_SET_GET_AVREG, 0x18, 0x1e}, + {REQ_07_SET_GET_AVREG, 0x19, 0x8b}, + {REQ_07_SET_GET_AVREG, 0x1a, 0xa2}, + {REQ_07_SET_GET_AVREG, 0x1b, 0xe9}, + {REQ_07_SET_GET_AVREG, 0x1c, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x1d, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1e, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1f, 0xcd}, + {REQ_07_SET_GET_AVREG, 0x2e, 0x88}, + {REQ_07_SET_GET_AVREG, 0x30, 0x22}, + {REQ_07_SET_GET_AVREG, 0x31, 0x61}, + {REQ_07_SET_GET_AVREG, 0x33, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x35, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x82, 0x42}, + {REQ_07_SET_GET_AVREG, 0x83, 0x6F}, + + {REQ_07_SET_GET_AVREG, 0x04, 0xdd}, + {REQ_07_SET_GET_AVREG, 0x0d, 0x07}, + {REQ_07_SET_GET_AVREG, 0x3f, 0x00}, + {0, 0, 0}, + }, + }, +}; + +static struct tm6000_std_settings composite_stds[] = { + { + .id = V4L2_STD_PAL_M, + .common = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xf4}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf3}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x0f}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf1}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe8}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x68}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfc}, + {REQ_07_SET_GET_AVREG, 0xfe, 0x8b}, + + {REQ_07_SET_GET_AVREG, 0x3f, 0x01}, + {REQ_07_SET_GET_AVREG, 0x00, 0x04}, + {REQ_07_SET_GET_AVREG, 0x01, 0x0e}, + {REQ_07_SET_GET_AVREG, 0x02, 0x5f}, + {REQ_07_SET_GET_AVREG, 0x03, 0x00}, + {REQ_07_SET_GET_AVREG, 0x07, 0x01}, + {REQ_07_SET_GET_AVREG, 0x18, 0x1e}, + {REQ_07_SET_GET_AVREG, 0x19, 0x83}, + {REQ_07_SET_GET_AVREG, 0x1a, 0x0a}, + {REQ_07_SET_GET_AVREG, 0x1b, 0xe0}, + {REQ_07_SET_GET_AVREG, 0x1c, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x1d, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1e, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1f, 0xcd}, + {REQ_07_SET_GET_AVREG, 0x2e, 0x88}, + {REQ_07_SET_GET_AVREG, 0x30, 0x20}, + {REQ_07_SET_GET_AVREG, 0x31, 0x61}, + {REQ_07_SET_GET_AVREG, 0x33, 0x0c}, + {REQ_07_SET_GET_AVREG, 0x35, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x82, 0x52}, + {REQ_07_SET_GET_AVREG, 0x83, 0x6F}, + + {REQ_07_SET_GET_AVREG, 0x04, 0xdc}, + {REQ_07_SET_GET_AVREG, 0x0d, 0x07}, + {REQ_07_SET_GET_AVREG, 0x3f, 0x00}, + {0, 0, 0}, + }, + }, { + .id = V4L2_STD_PAL_Nc, + .common = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xf4}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf3}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x0f}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf1}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe8}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x68}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfc}, + {REQ_07_SET_GET_AVREG, 0xfe, 0x8b}, + + {REQ_07_SET_GET_AVREG, 0x3f, 0x01}, + {REQ_07_SET_GET_AVREG, 0x00, 0x36}, + {REQ_07_SET_GET_AVREG, 0x01, 0x0e}, + {REQ_07_SET_GET_AVREG, 0x02, 0x5f}, + {REQ_07_SET_GET_AVREG, 0x03, 0x02}, + {REQ_07_SET_GET_AVREG, 0x07, 0x01}, + {REQ_07_SET_GET_AVREG, 0x18, 0x1e}, + {REQ_07_SET_GET_AVREG, 0x19, 0x91}, + {REQ_07_SET_GET_AVREG, 0x1a, 0x1f}, + {REQ_07_SET_GET_AVREG, 0x1b, 0x0c}, + {REQ_07_SET_GET_AVREG, 0x1c, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x1d, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1e, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1f, 0xcd}, + {REQ_07_SET_GET_AVREG, 0x2e, 0x8c}, + {REQ_07_SET_GET_AVREG, 0x30, 0x2c}, + {REQ_07_SET_GET_AVREG, 0x31, 0xc1}, + {REQ_07_SET_GET_AVREG, 0x33, 0x0c}, + {REQ_07_SET_GET_AVREG, 0x35, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x82, 0x52}, + {REQ_07_SET_GET_AVREG, 0x83, 0x6F}, + + {REQ_07_SET_GET_AVREG, 0x04, 0xdc}, + {REQ_07_SET_GET_AVREG, 0x0d, 0x07}, + {REQ_07_SET_GET_AVREG, 0x3f, 0x00}, + {0, 0, 0}, + }, + }, { + .id = V4L2_STD_PAL, + .common = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xf4}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf3}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x0f}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf1}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe8}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x68}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfc}, + {REQ_07_SET_GET_AVREG, 0xfe, 0x8b}, + + {REQ_07_SET_GET_AVREG, 0x3f, 0x01}, + {REQ_07_SET_GET_AVREG, 0x00, 0x32}, + {REQ_07_SET_GET_AVREG, 0x01, 0x0e}, + {REQ_07_SET_GET_AVREG, 0x02, 0x5f}, + {REQ_07_SET_GET_AVREG, 0x03, 0x02}, + {REQ_07_SET_GET_AVREG, 0x07, 0x01}, + {REQ_07_SET_GET_AVREG, 0x18, 0x25}, + {REQ_07_SET_GET_AVREG, 0x19, 0xd5}, + {REQ_07_SET_GET_AVREG, 0x1a, 0x63}, + {REQ_07_SET_GET_AVREG, 0x1b, 0x50}, + {REQ_07_SET_GET_AVREG, 0x1c, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x1d, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1e, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1f, 0xcd}, + {REQ_07_SET_GET_AVREG, 0x2e, 0x8c}, + {REQ_07_SET_GET_AVREG, 0x30, 0x2c}, + {REQ_07_SET_GET_AVREG, 0x31, 0xc1}, + {REQ_07_SET_GET_AVREG, 0x33, 0x0c}, + {REQ_07_SET_GET_AVREG, 0x35, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x82, 0x52}, + {REQ_07_SET_GET_AVREG, 0x83, 0x6F}, + + {REQ_07_SET_GET_AVREG, 0x04, 0xdc}, + {REQ_07_SET_GET_AVREG, 0x0d, 0x07}, + {REQ_07_SET_GET_AVREG, 0x3f, 0x00}, + {0, 0, 0}, + }, + }, { + .id = V4L2_STD_SECAM, + .common = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xf4}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf3}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x0f}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf1}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe8}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x68}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfc}, + {REQ_07_SET_GET_AVREG, 0xfe, 0x8b}, + + {REQ_07_SET_GET_AVREG, 0x3f, 0x01}, + {REQ_07_SET_GET_AVREG, 0x00, 0x38}, + {REQ_07_SET_GET_AVREG, 0x01, 0x0e}, + {REQ_07_SET_GET_AVREG, 0x02, 0x5f}, + {REQ_07_SET_GET_AVREG, 0x03, 0x02}, + {REQ_07_SET_GET_AVREG, 0x07, 0x01}, + {REQ_07_SET_GET_AVREG, 0x18, 0x24}, + {REQ_07_SET_GET_AVREG, 0x19, 0x92}, + {REQ_07_SET_GET_AVREG, 0x1a, 0xe8}, + {REQ_07_SET_GET_AVREG, 0x1b, 0xed}, + {REQ_07_SET_GET_AVREG, 0x1c, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x1d, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1e, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1f, 0xcd}, + {REQ_07_SET_GET_AVREG, 0x2e, 0x8c}, + {REQ_07_SET_GET_AVREG, 0x30, 0x2c}, + {REQ_07_SET_GET_AVREG, 0x31, 0xc1}, + {REQ_07_SET_GET_AVREG, 0x33, 0x2c}, + {REQ_07_SET_GET_AVREG, 0x35, 0x18}, + {REQ_07_SET_GET_AVREG, 0x82, 0x42}, + {REQ_07_SET_GET_AVREG, 0x83, 0xFF}, + + {REQ_07_SET_GET_AVREG, 0x0d, 0x07}, + {REQ_07_SET_GET_AVREG, 0x3f, 0x00}, + {0, 0, 0}, + }, + }, { + .id = V4L2_STD_NTSC, + .common = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xf4}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf3}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x0f}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf1}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe8}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x68}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfc}, + {REQ_07_SET_GET_AVREG, 0xfe, 0x8b}, + + {REQ_07_SET_GET_AVREG, 0x3f, 0x01}, + {REQ_07_SET_GET_AVREG, 0x00, 0x00}, + {REQ_07_SET_GET_AVREG, 0x01, 0x0f}, + {REQ_07_SET_GET_AVREG, 0x02, 0x5f}, + {REQ_07_SET_GET_AVREG, 0x03, 0x00}, + {REQ_07_SET_GET_AVREG, 0x07, 0x01}, + {REQ_07_SET_GET_AVREG, 0x18, 0x1e}, + {REQ_07_SET_GET_AVREG, 0x19, 0x8b}, + {REQ_07_SET_GET_AVREG, 0x1a, 0xa2}, + {REQ_07_SET_GET_AVREG, 0x1b, 0xe9}, + {REQ_07_SET_GET_AVREG, 0x1c, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x1d, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1e, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1f, 0xcd}, + {REQ_07_SET_GET_AVREG, 0x2e, 0x88}, + {REQ_07_SET_GET_AVREG, 0x30, 0x22}, + {REQ_07_SET_GET_AVREG, 0x31, 0x61}, + {REQ_07_SET_GET_AVREG, 0x33, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x35, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x82, 0x42}, + {REQ_07_SET_GET_AVREG, 0x83, 0x6F}, + + {REQ_07_SET_GET_AVREG, 0x04, 0xdd}, + {REQ_07_SET_GET_AVREG, 0x0d, 0x07}, + {REQ_07_SET_GET_AVREG, 0x3f, 0x00}, + {0, 0, 0}, + }, + }, +}; + +static struct tm6000_std_settings svideo_stds[] = { + { + .id = V4L2_STD_PAL_M, + .common = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xfc}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf8}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x00}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf2}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x68}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfc}, + {REQ_07_SET_GET_AVREG, 0xfe, 0x8a}, + + {REQ_07_SET_GET_AVREG, 0x3f, 0x01}, + {REQ_07_SET_GET_AVREG, 0x00, 0x05}, + {REQ_07_SET_GET_AVREG, 0x01, 0x0e}, + {REQ_07_SET_GET_AVREG, 0x02, 0x5f}, + {REQ_07_SET_GET_AVREG, 0x03, 0x04}, + {REQ_07_SET_GET_AVREG, 0x07, 0x01}, + {REQ_07_SET_GET_AVREG, 0x18, 0x1e}, + {REQ_07_SET_GET_AVREG, 0x19, 0x83}, + {REQ_07_SET_GET_AVREG, 0x1a, 0x0a}, + {REQ_07_SET_GET_AVREG, 0x1b, 0xe0}, + {REQ_07_SET_GET_AVREG, 0x1c, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x1d, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1e, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1f, 0xcd}, + {REQ_07_SET_GET_AVREG, 0x2e, 0x88}, + {REQ_07_SET_GET_AVREG, 0x30, 0x22}, + {REQ_07_SET_GET_AVREG, 0x31, 0x61}, + {REQ_07_SET_GET_AVREG, 0x33, 0x0c}, + {REQ_07_SET_GET_AVREG, 0x35, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x82, 0x52}, + {REQ_07_SET_GET_AVREG, 0x83, 0x6F}, + + {REQ_07_SET_GET_AVREG, 0x04, 0xdc}, + {REQ_07_SET_GET_AVREG, 0x0d, 0x07}, + {REQ_07_SET_GET_AVREG, 0x3f, 0x00}, + {0, 0, 0}, + }, + }, { + .id = V4L2_STD_PAL_Nc, + .common = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xfc}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf8}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x00}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf2}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x68}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfc}, + {REQ_07_SET_GET_AVREG, 0xfe, 0x8a}, + + {REQ_07_SET_GET_AVREG, 0x3f, 0x01}, + {REQ_07_SET_GET_AVREG, 0x00, 0x37}, + {REQ_07_SET_GET_AVREG, 0x01, 0x0e}, + {REQ_07_SET_GET_AVREG, 0x02, 0x5f}, + {REQ_07_SET_GET_AVREG, 0x03, 0x04}, + {REQ_07_SET_GET_AVREG, 0x07, 0x01}, + {REQ_07_SET_GET_AVREG, 0x18, 0x1e}, + {REQ_07_SET_GET_AVREG, 0x19, 0x91}, + {REQ_07_SET_GET_AVREG, 0x1a, 0x1f}, + {REQ_07_SET_GET_AVREG, 0x1b, 0x0c}, + {REQ_07_SET_GET_AVREG, 0x1c, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x1d, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1e, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1f, 0xcd}, + {REQ_07_SET_GET_AVREG, 0x2e, 0x88}, + {REQ_07_SET_GET_AVREG, 0x30, 0x22}, + {REQ_07_SET_GET_AVREG, 0x31, 0xc1}, + {REQ_07_SET_GET_AVREG, 0x33, 0x0c}, + {REQ_07_SET_GET_AVREG, 0x35, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x82, 0x52}, + {REQ_07_SET_GET_AVREG, 0x83, 0x6F}, + + {REQ_07_SET_GET_AVREG, 0x04, 0xdc}, + {REQ_07_SET_GET_AVREG, 0x0d, 0x07}, + {REQ_07_SET_GET_AVREG, 0x3f, 0x00}, + {0, 0, 0}, + }, + }, { + .id = V4L2_STD_PAL, + .common = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xfc}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf8}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x00}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf2}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x68}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfc}, + {REQ_07_SET_GET_AVREG, 0xfe, 0x8a}, + + {REQ_07_SET_GET_AVREG, 0x3f, 0x01}, + {REQ_07_SET_GET_AVREG, 0x00, 0x33}, + {REQ_07_SET_GET_AVREG, 0x01, 0x0e}, + {REQ_07_SET_GET_AVREG, 0x02, 0x5f}, + {REQ_07_SET_GET_AVREG, 0x03, 0x04}, + {REQ_07_SET_GET_AVREG, 0x07, 0x00}, + {REQ_07_SET_GET_AVREG, 0x18, 0x25}, + {REQ_07_SET_GET_AVREG, 0x19, 0xd5}, + {REQ_07_SET_GET_AVREG, 0x1a, 0x63}, + {REQ_07_SET_GET_AVREG, 0x1b, 0x50}, + {REQ_07_SET_GET_AVREG, 0x1c, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x1d, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1e, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1f, 0xcd}, + {REQ_07_SET_GET_AVREG, 0x2e, 0x8c}, + {REQ_07_SET_GET_AVREG, 0x30, 0x2a}, + {REQ_07_SET_GET_AVREG, 0x31, 0xc1}, + {REQ_07_SET_GET_AVREG, 0x33, 0x0c}, + {REQ_07_SET_GET_AVREG, 0x35, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x82, 0x52}, + {REQ_07_SET_GET_AVREG, 0x83, 0x6F}, + + {REQ_07_SET_GET_AVREG, 0x04, 0xdc}, + {REQ_07_SET_GET_AVREG, 0x0d, 0x07}, + {REQ_07_SET_GET_AVREG, 0x3f, 0x00}, + {0, 0, 0}, + }, + }, { + .id = V4L2_STD_SECAM, + .common = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xfc}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf8}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x00}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf2}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x68}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfc}, + {REQ_07_SET_GET_AVREG, 0xfe, 0x8a}, + + {REQ_07_SET_GET_AVREG, 0x3f, 0x01}, + {REQ_07_SET_GET_AVREG, 0x00, 0x39}, + {REQ_07_SET_GET_AVREG, 0x01, 0x0e}, + {REQ_07_SET_GET_AVREG, 0x02, 0x5f}, + {REQ_07_SET_GET_AVREG, 0x03, 0x03}, + {REQ_07_SET_GET_AVREG, 0x07, 0x01}, + {REQ_07_SET_GET_AVREG, 0x18, 0x24}, + {REQ_07_SET_GET_AVREG, 0x19, 0x92}, + {REQ_07_SET_GET_AVREG, 0x1a, 0xe8}, + {REQ_07_SET_GET_AVREG, 0x1b, 0xed}, + {REQ_07_SET_GET_AVREG, 0x1c, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x1d, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1e, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1f, 0xcd}, + {REQ_07_SET_GET_AVREG, 0x2e, 0x8c}, + {REQ_07_SET_GET_AVREG, 0x30, 0x2a}, + {REQ_07_SET_GET_AVREG, 0x31, 0xc1}, + {REQ_07_SET_GET_AVREG, 0x33, 0x2c}, + {REQ_07_SET_GET_AVREG, 0x35, 0x18}, + {REQ_07_SET_GET_AVREG, 0x82, 0x42}, + {REQ_07_SET_GET_AVREG, 0x83, 0xFF}, + + {REQ_07_SET_GET_AVREG, 0x0d, 0x07}, + {REQ_07_SET_GET_AVREG, 0x3f, 0x00}, + {0, 0, 0}, + }, + }, { + .id = V4L2_STD_NTSC, + .common = { + {REQ_08_SET_GET_AVREG_BIT, 0xe2, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xe3, 0xfc}, + {REQ_08_SET_GET_AVREG_BIT, 0xe4, 0xf8}, + {REQ_08_SET_GET_AVREG_BIT, 0xe6, 0x00}, + {REQ_08_SET_GET_AVREG_BIT, 0xea, 0xf2}, + {REQ_08_SET_GET_AVREG_BIT, 0xeb, 0xf0}, + {REQ_08_SET_GET_AVREG_BIT, 0xec, 0xc2}, + {REQ_08_SET_GET_AVREG_BIT, 0xed, 0xe0}, + {REQ_08_SET_GET_AVREG_BIT, 0xf0, 0x68}, + {REQ_08_SET_GET_AVREG_BIT, 0xf1, 0xfc}, + {REQ_07_SET_GET_AVREG, 0xfe, 0x8a}, + + {REQ_07_SET_GET_AVREG, 0x3f, 0x01}, + {REQ_07_SET_GET_AVREG, 0x00, 0x01}, + {REQ_07_SET_GET_AVREG, 0x01, 0x0f}, + {REQ_07_SET_GET_AVREG, 0x02, 0x5f}, + {REQ_07_SET_GET_AVREG, 0x03, 0x03}, + {REQ_07_SET_GET_AVREG, 0x07, 0x00}, + {REQ_07_SET_GET_AVREG, 0x17, 0x8b}, + {REQ_07_SET_GET_AVREG, 0x18, 0x1e}, + {REQ_07_SET_GET_AVREG, 0x19, 0x8b}, + {REQ_07_SET_GET_AVREG, 0x1a, 0xa2}, + {REQ_07_SET_GET_AVREG, 0x1b, 0xe9}, + {REQ_07_SET_GET_AVREG, 0x1c, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x1d, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1e, 0xcc}, + {REQ_07_SET_GET_AVREG, 0x1f, 0xcd}, + {REQ_07_SET_GET_AVREG, 0x2e, 0x88}, + {REQ_07_SET_GET_AVREG, 0x30, 0x22}, + {REQ_07_SET_GET_AVREG, 0x31, 0x61}, + {REQ_07_SET_GET_AVREG, 0x33, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x35, 0x1c}, + {REQ_07_SET_GET_AVREG, 0x82, 0x42}, + {REQ_07_SET_GET_AVREG, 0x83, 0x6F}, + + {REQ_07_SET_GET_AVREG, 0x04, 0xdd}, + {REQ_07_SET_GET_AVREG, 0x0d, 0x07}, + {REQ_07_SET_GET_AVREG, 0x3f, 0x00}, + {0, 0, 0}, + }, + }, +}; + +void tm6000_get_std_res(struct tm6000_core *dev) +{ + /* Currently, those are the only supported resoltions */ + if (dev->norm & V4L2_STD_525_60) { + dev->height = 480; + } else { + dev->height = 576; + } + dev->width = 720; +} + +static int tm6000_load_std(struct tm6000_core *dev, + struct tm6000_reg_settings *set, int max_size) +{ + int i, rc; + + /* Load board's initialization table */ + for (i = 0; max_size; i++) { + if (!set[i].req) + return 0; + + if ((dev->dev_type != TM6010) && + (set[i].req == REQ_08_SET_GET_AVREG_BIT)) + continue; + + rc = tm6000_set_reg(dev, set[i].req, set[i].reg, set[i].value); + if (rc < 0) { + printk(KERN_ERR "Error %i while setting " + "req %d, reg %d to value %d\n", + rc, set[i].req, set[i].reg, set[i].value); + return rc; + } + } + + return 0; +} + +static int tm6000_set_tv(struct tm6000_core *dev, int pos) +{ + int rc; + +#if 1 + /* FIXME: This code is for tm6010 - not tested yet - doesn't work with + tm5600 + */ + + /* FIXME: This is tuner-dependent */ + int nosif = 0; + + if (nosif) { + rc = tm6000_load_std(dev, tv_stds[pos].nosif, + sizeof(tv_stds[pos].nosif)); + } else { + rc = tm6000_load_std(dev, tv_stds[pos].sif, + sizeof(tv_stds[pos].sif)); + } + if (rc < 0) + return rc; +#endif + rc = tm6000_load_std(dev, tv_stds[pos].common, + sizeof(tv_stds[pos].common)); + + return rc; +} + +int tm6000_set_standard(struct tm6000_core *dev, v4l2_std_id * norm) +{ + int i, rc = 0; + + dev->norm = *norm; + tm6000_get_std_res(dev); + + switch (dev->input) { + case TM6000_INPUT_TV: + for (i = 0; i < ARRAY_SIZE(tv_stds); i++) { + if (*norm & tv_stds[i].id) { + rc = tm6000_set_tv(dev, i); + goto ret; + } + } + return -EINVAL; + case TM6000_INPUT_SVIDEO: + for (i = 0; i < ARRAY_SIZE(svideo_stds); i++) { + if (*norm & svideo_stds[i].id) { + rc = tm6000_load_std(dev, svideo_stds[i].common, + sizeof(svideo_stds[i]. + common)); + goto ret; + } + } + return -EINVAL; + case TM6000_INPUT_COMPOSITE: + for (i = 0; i < ARRAY_SIZE(composite_stds); i++) { + if (*norm & composite_stds[i].id) { + rc = tm6000_load_std(dev, + composite_stds[i].common, + sizeof(composite_stds[i]. + common)); + goto ret; + } + } + return -EINVAL; + } + +ret: + if (rc < 0) + return rc; + + msleep(40); + +#if 0 + /* Sets scaling */ + if (dev->dev_type != TM6010) { + /* Enables soft reset */ + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0x3f, 0x01); + + /* Enable Hfilter and disable TS Drop err */ + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xc0, 0x80); + + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xc3, 0x88); + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xda, 0x23); + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xd1, 0xc0); + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xd2, 0xd8); + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xd6, 0x06); + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0xdf, 0x1f); + + tm6000_set_fourcc_format(dev); + + /* Disables soft reset */ + tm6000_set_reg(dev, REQ_07_SET_GET_AVREG, 0x3f, 0x00); + } +#endif + + return 0; +} diff --git a/linux/drivers/staging/tm6000/tm6000-usb-isoc.h b/linux/drivers/staging/tm6000/tm6000-usb-isoc.h new file mode 100644 index 000000000..9d435531e --- /dev/null +++ b/linux/drivers/staging/tm6000/tm6000-usb-isoc.h @@ -0,0 +1,54 @@ +/* + tm6000-buf.c - driver for TM5600/TM6000 USB video capture devices + + Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation version 2 + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "compat.h" +#include <linux/videodev2.h> + +#define TM6000_URB_MSG_LEN 180 + +struct usb_isoc_ctl { + /* max packet size of isoc transaction */ + int max_pkt_size; + + /* number of allocated urbs */ + int num_bufs; + + /* urb for isoc transfers */ + struct urb **urb; + + /* transfer buffers for isoc transfer */ + char **transfer_buffer; + + /* Last buffer command and region */ + u8 cmd; + int pos, size, pktsize; + + /* Last field: ODD or EVEN? */ + int field; + + /* Stores incomplete commands */ + u32 tmp_buf; + int tmp_buf_len; + + /* Stores already requested buffers */ + struct tm6000_buffer *buf; + + /* Stores the number of received fields */ + int nfields; +}; diff --git a/linux/drivers/staging/tm6000/tm6000-video.c b/linux/drivers/staging/tm6000/tm6000-video.c new file mode 100644 index 000000000..7ce2e43a4 --- /dev/null +++ b/linux/drivers/staging/tm6000/tm6000-video.c @@ -0,0 +1,1656 @@ +/* + tm6000-video.c - driver for TM5600/TM6000 USB video capture devices + + Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org> + + Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com> + - Fixed module load/unload + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation version 2 + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/random.h> +#include <linux/version.h> +#include <linux/usb.h> +#include "compat.h" +#include <linux/videodev2.h> +#include <media/v4l2-ioctl.h> +#include <linux/interrupt.h> +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0) +#include <linux/kthread.h> +#endif +#include <linux/highmem.h> +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20) +#include <linux/freezer.h> +#endif + +#include "tm6000-regs.h" +#include "tm6000.h" + +#define BUFFER_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */ + +/* Limits minimum and default number of buffers */ +#define TM6000_MIN_BUF 4 +#define TM6000_DEF_BUF 8 + +#define TM6000_MAX_ISO_PACKETS 40 /* Max number of ISO packets */ + +/* Declare static vars that will be used as parameters */ +static unsigned int vid_limit = 16; /* Video memory limit, in Mb */ +static int video_nr = -1; /* /dev/videoN, -1 for autodetect */ + +/* Debug level */ +int tm6000_debug; + +/* supported controls */ +static struct v4l2_queryctrl tm6000_qctrl[] = { + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 54, + .flags = 0, + }, { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Contrast", + .minimum = 0, + .maximum = 255, + .step = 0x1, + .default_value = 119, + .flags = 0, + }, { + .id = V4L2_CID_SATURATION, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Saturation", + .minimum = 0, + .maximum = 255, + .step = 0x1, + .default_value = 112, + .flags = 0, + }, { + .id = V4L2_CID_HUE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Hue", + .minimum = -128, + .maximum = 127, + .step = 0x1, + .default_value = 0, + .flags = 0, + } +}; + +static int qctl_regs[ARRAY_SIZE(tm6000_qctrl)]; + +static struct tm6000_fmt format[] = { + { + .name = "4:2:2, packed, YVY2", + .fourcc = V4L2_PIX_FMT_YUYV, + .depth = 16, + }, { + .name = "4:2:2, packed, UYVY", + .fourcc = V4L2_PIX_FMT_UYVY, + .depth = 16, + }, { + .name = "A/V + VBI mux packet", + .fourcc = V4L2_PIX_FMT_TM6000, + .depth = 16, + } +}; + +static LIST_HEAD(tm6000_corelist); + +/* ------------------------------------------------------------------ + DMA and thread functions + ------------------------------------------------------------------*/ + +#define norm_maxw(a) 720 +#define norm_maxh(a) 576 + +#define norm_minw(a) norm_maxw(a) +#define norm_minh(a) norm_maxh(a) + +/* + * video-buf generic routine to get the next available buffer + */ +static inline void get_next_buf(struct tm6000_dmaqueue *dma_q, + struct tm6000_buffer **buf) +{ + struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq); +#if 1 + char *outp; +#endif + + if (list_empty(&dma_q->active)) { + dprintk(dev, V4L2_DEBUG_QUEUE, "No active queue to serve\n"); + *buf = NULL; + return; + } + + *buf = list_entry(dma_q->active.next, + struct tm6000_buffer, vb.queue); + +#if 1 + if (!buf) + return; + + /* Cleans up buffer - Usefull for testing for frame/URB loss */ + outp = videobuf_to_vmalloc(&(*buf)->vb); + memset(outp, 0, (*buf)->vb.size); +#endif + + return; +} + +/* + * Announces that a buffer were filled and request the next + */ +static inline void buffer_filled(struct tm6000_core *dev, + struct tm6000_dmaqueue *dma_q, + struct tm6000_buffer *buf) +{ + /* Advice that buffer was filled */ + dprintk(dev, V4L2_DEBUG_ISOC, "[%p/%d] wakeup\n", buf, buf->vb.i); + buf->vb.state = VIDEOBUF_DONE; + buf->vb.field_count++; + do_gettimeofday(&buf->vb.ts); + + list_del(&buf->vb.queue); + wake_up(&buf->vb.done); +} + +const char *tm6000_msg_type[] = { + "unknown(0)", /* 0 */ + "video", /* 1 */ + "audio", /* 2 */ + "vbi", /* 3 */ + "pts", /* 4 */ + "err", /* 5 */ + "unknown(6)", /* 6 */ + "unknown(7)", /* 7 */ +}; + +/* + * Identify the tm5600/6000 buffer header type and properly handles + */ +static int copy_packet(struct urb *urb, u32 header, u8 **ptr, u8 *endp, + u8 *out_p, struct tm6000_buffer **buf) +{ + struct tm6000_dmaqueue *dma_q = urb->context; + struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq); + u8 c; + unsigned int cmd, cpysize, pktsize, size, field, block, line, pos = 0; + int rc = 0; + /* FIXME: move to tm6000-isoc */ + static int last_line = -2, start_line = -2, last_field = -2; + + /* FIXME: this is the hardcoded window size + */ + unsigned int linewidth = (*buf)->vb.width << 1; + + if (!dev->isoc_ctl.cmd) { + c = (header >> 24) & 0xff; + + /* split the header fields */ + size = (((header & 0x7e) << 1) -1) *4; + block = (header >> 7) & 0xf; + field = (header >> 11) & 0x1; + line = (header >> 12) & 0x1ff; + cmd = (header >> 21) & 0x7; + + /* Validates header fields */ + if(size > TM6000_URB_MSG_LEN) + size = TM6000_URB_MSG_LEN; + + if (cmd == TM6000_URB_MSG_VIDEO) { + if ((block+1)*TM6000_URB_MSG_LEN>linewidth) + cmd = TM6000_URB_MSG_ERR; + + /* FIXME: Mounts the image as field0+field1 + * It should, instead, check if the user selected + * entrelaced or non-entrelaced mode + */ + pos= ((line<<1)+field)*linewidth + + block*TM6000_URB_MSG_LEN; + + /* Don't allow to write out of the buffer */ + if (pos+TM6000_URB_MSG_LEN > (*buf)->vb.size) { + dprintk(dev, V4L2_DEBUG_ISOC, + "ERR: size=%d, num=%d, line=%d, " + "field=%d\n", + size, block, line, field); + + cmd = TM6000_URB_MSG_ERR; + } + } else { + pos=0; + } + + /* Prints debug info */ + dprintk(dev, V4L2_DEBUG_ISOC, "size=%d, num=%d, " + " line=%d, field=%d\n", + size, block, line, field); + + if ((last_line!=line)&&(last_line+1!=line) && + (cmd != TM6000_URB_MSG_ERR) ) { + if (cmd != TM6000_URB_MSG_VIDEO) { + dprintk(dev, V4L2_DEBUG_ISOC, "cmd=%d, " + "size=%d, num=%d, line=%d, field=%d\n", + cmd, size, block, line, field); + } + if (start_line<0) + start_line=last_line; + /* Prints debug info */ + dprintk(dev, V4L2_DEBUG_ISOC, "lines= %d-%d, " + "field=%d\n", + start_line, last_line, field); + + if ((start_line<6 && last_line>200) && + (last_field != field) ) { + + dev->isoc_ctl.nfields++; + if (dev->isoc_ctl.nfields>=2) { + dev->isoc_ctl.nfields=0; + + /* Announces that a new buffer were filled */ + buffer_filled (dev, dma_q, *buf); + dprintk(dev, V4L2_DEBUG_ISOC, + "new buffer filled\n"); + get_next_buf (dma_q, buf); + if (!*buf) + return rc; + out_p = videobuf_to_vmalloc(&((*buf)->vb)); + if (!out_p) + return rc; + + pos = dev->isoc_ctl.pos = 0; + } + } + + start_line=line; + last_field=field; + } + last_line=line; + + pktsize = TM6000_URB_MSG_LEN; + } else { + /* Continue the last copy */ + cmd = dev->isoc_ctl.cmd; + size= dev->isoc_ctl.size; + pos = dev->isoc_ctl.pos; + pktsize = dev->isoc_ctl.pktsize; + } + +#if 0 /* This never happens at this point */ + if (!buf) + cmd=TM6000_URB_MSG_ERR; +#endif + cpysize = (endp-(*ptr) > size) ? size : endp - *ptr; + + if (cpysize) { + /* handles each different URB message */ + switch(cmd) { + case TM6000_URB_MSG_VIDEO: + /* Fills video buffer */ + memcpy(&out_p[pos], *ptr, cpysize); + break; + case TM6000_URB_MSG_PTS: + break; + case TM6000_URB_MSG_AUDIO: +/* Need some code to process audio */ +printk ("%ld: cmd=%s, size=%d\n", jiffies, + tm6000_msg_type[cmd],size); + break; + default: + dprintk (dev, V4L2_DEBUG_ISOC, "cmd=%s, size=%d\n", + tm6000_msg_type[cmd],size); + } + } + if (cpysize<size) { + /* End of URB packet, but cmd processing is not + * complete. Preserve the state for a next packet + */ + dev->isoc_ctl.pos = pos+cpysize; + dev->isoc_ctl.size= size-cpysize; + dev->isoc_ctl.cmd = cmd; + dev->isoc_ctl.pktsize = pktsize-cpysize; + (*ptr)+=cpysize; + } else { + dev->isoc_ctl.cmd = 0; + (*ptr)+=pktsize; + } + + return rc; +} + +static int copy_streams(u8 *data, u8 *out_p, unsigned long len, + struct urb *urb, struct tm6000_buffer **buf) +{ + struct tm6000_dmaqueue *dma_q = urb->context; + struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq); + u8 *ptr=data, *endp=data+len; + unsigned long header=0; + int rc=0; + + for (ptr=data; ptr<endp;) { + if (!dev->isoc_ctl.cmd) { + u8 *p=(u8 *)&dev->isoc_ctl.tmp_buf; + /* FIXME: This seems very complex + * It just recovers up to 3 bytes of the header that + * might be at the previous packet + */ + if (dev->isoc_ctl.tmp_buf_len) { + while (dev->isoc_ctl.tmp_buf_len) { + if ( *(ptr+3-dev->isoc_ctl.tmp_buf_len) == 0x47) { + break; + } + p++; + dev->isoc_ctl.tmp_buf_len--; + } + if (dev->isoc_ctl.tmp_buf_len) { + memcpy (&header,p, + dev->isoc_ctl.tmp_buf_len); + memcpy (((u8 *)header)+ + dev->isoc_ctl.tmp_buf, + ptr, + 4-dev->isoc_ctl.tmp_buf_len); + ptr+=4-dev->isoc_ctl.tmp_buf_len; + goto HEADER; + } + } + /* Seek for sync */ + for (;ptr<endp-3;ptr++) { + if (*(ptr+3)==0x47) + break; + } + + if (ptr+3>=endp) { + dev->isoc_ctl.tmp_buf_len=endp-ptr; + memcpy (&dev->isoc_ctl.tmp_buf,ptr, + dev->isoc_ctl.tmp_buf_len); + dev->isoc_ctl.cmd=0; + return rc; + } + + /* Get message header */ + header=*(unsigned long *)ptr; + ptr+=4; + } +HEADER: + /* Copy or continue last copy */ + rc=copy_packet(urb,header,&ptr,endp,out_p,buf); + if (rc<0) { + buf=NULL; + printk(KERN_ERR "tm6000: buffer underrun at %ld\n", + jiffies); + return rc; + } + } + + return 0; +} +/* + * Identify the tm5600/6000 buffer header type and properly handles + */ +static int copy_multiplexed(u8 *ptr, u8 *out_p, unsigned long len, + struct urb *urb, struct tm6000_buffer **buf) +{ + struct tm6000_dmaqueue *dma_q = urb->context; + struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq); + unsigned int pos=dev->isoc_ctl.pos,cpysize; + int rc=1; + + while (len>0) { + cpysize=min(len,(*buf)->vb.size-pos); +//printk("Copying %d bytes (max=%lu) from %p to %p[%u]\n",cpysize,(*buf)->vb.size,ptr,out_p,pos); + memcpy(&out_p[pos], ptr, cpysize); + pos+=cpysize; + ptr+=cpysize; + len-=cpysize; + if (pos >= (*buf)->vb.size) { + pos=0; + /* Announces that a new buffer were filled */ + buffer_filled (dev, dma_q, *buf); + dprintk(dev, V4L2_DEBUG_ISOC, "new buffer filled\n"); + get_next_buf (dma_q, buf); + if (!*buf) + break; + out_p = videobuf_to_vmalloc(&((*buf)->vb)); + if (!out_p) + return rc; + pos = 0; + } + } + + dev->isoc_ctl.pos=pos; + return rc; +} + +static void inline print_err_status (struct tm6000_core *dev, + int packet, int status) +{ + char *errmsg = "Unknown"; + + switch(status) { + case -ENOENT: + errmsg = "unlinked synchronuously"; + break; + case -ECONNRESET: + errmsg = "unlinked asynchronuously"; + break; + case -ENOSR: + errmsg = "Buffer error (overrun)"; + break; + case -EPIPE: + errmsg = "Stalled (device not responding)"; + break; + case -EOVERFLOW: + errmsg = "Babble (bad cable?)"; + break; + case -EPROTO: + errmsg = "Bit-stuff error (bad cable?)"; + break; + case -EILSEQ: + errmsg = "CRC/Timeout (could be anything)"; + break; + case -ETIME: + errmsg = "Device does not respond"; + break; + } + if (packet<0) { + dprintk(dev, V4L2_DEBUG_QUEUE, "URB status %d [%s].\n", + status, errmsg); + } else { + dprintk(dev, V4L2_DEBUG_QUEUE, "URB packet %d, status %d [%s].\n", + packet, status, errmsg); + } +} + + +/* + * Controls the isoc copy of each urb packet + */ +static inline int tm6000_isoc_copy(struct urb *urb) +{ + struct tm6000_dmaqueue *dma_q = urb->context; + struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq); + struct tm6000_buffer *buf; + int i, len=0, rc=1; + int size; + char *outp = NULL, *p; + unsigned long copied; + + get_next_buf(dma_q, &buf); + if (!buf) + outp = videobuf_to_vmalloc(&buf->vb); + + if (!outp) + return 0; + + size = buf->vb.size; + + copied=0; + + if (urb->status<0) { + print_err_status (dev,-1,urb->status); + return 0; + } + + for (i = 0; i < urb->number_of_packets; i++) { + int status = urb->iso_frame_desc[i].status; + + if (status<0) { + print_err_status (dev,i,status); + continue; + } + + len=urb->iso_frame_desc[i].actual_length; + +// if (len>=TM6000_URB_MSG_LEN) { + p=urb->transfer_buffer + urb->iso_frame_desc[i].offset; + if (!urb->iso_frame_desc[i].status) { + if ((buf->fmt->fourcc)==V4L2_PIX_FMT_TM6000) { + rc=copy_multiplexed(p, outp, len, urb, &buf); + if (rc<=0) + return rc; + } else { + copy_streams(p, outp, len, urb, &buf); + } + } + copied += len; + if (copied>=size) + break; +// } + } + return rc; +} + +/* ------------------------------------------------------------------ + URB control + ------------------------------------------------------------------*/ + +/* + * IRQ callback, called by URB callback + */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19) +static void tm6000_irq_callback(struct urb *urb, struct pt_regs *regs) +#else +static void tm6000_irq_callback(struct urb *urb) +#endif +{ + struct tm6000_dmaqueue *dma_q = urb->context; + struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq); + int i; + + if (!dev) + return; + + spin_lock(&dev->slock); + tm6000_isoc_copy(urb); + spin_unlock(&dev->slock); + + /* Reset urb buffers */ + for (i = 0; i < urb->number_of_packets; i++) { + urb->iso_frame_desc[i].status = 0; + urb->iso_frame_desc[i].actual_length = 0; + } + + urb->status = usb_submit_urb(urb, GFP_ATOMIC); + if (urb->status) + tm6000_err("urb resubmit failed (error=%i)\n", + urb->status); +} + +/* + * Stop and Deallocate URBs + */ +static void tm6000_uninit_isoc(struct tm6000_core *dev) +{ + struct urb *urb; + int i; + + dev->isoc_ctl.nfields = -1; + dev->isoc_ctl.buf = NULL; + for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { + urb=dev->isoc_ctl.urb[i]; + if (urb) { + usb_kill_urb(urb); + usb_unlink_urb(urb); + if (dev->isoc_ctl.transfer_buffer[i]) { + usb_buffer_free(dev->udev, + urb->transfer_buffer_length, + dev->isoc_ctl.transfer_buffer[i], + urb->transfer_dma); + } + usb_free_urb(urb); + dev->isoc_ctl.urb[i] = NULL; + } + dev->isoc_ctl.transfer_buffer[i] = NULL; + } + + kfree (dev->isoc_ctl.urb); + kfree (dev->isoc_ctl.transfer_buffer); + + dev->isoc_ctl.urb=NULL; + dev->isoc_ctl.transfer_buffer=NULL; + dev->isoc_ctl.num_bufs = 0; + + dev->isoc_ctl.num_bufs=0; +} + +/* + * Allocate URBs and start IRQ + */ +static int tm6000_prepare_isoc(struct tm6000_core *dev, unsigned int framesize) +{ + struct tm6000_dmaqueue *dma_q = &dev->vidq; + int i, j, sb_size, pipe, size, max_packets, num_bufs = 5; + struct urb *urb; + + /* De-allocates all pending stuff */ + tm6000_uninit_isoc(dev); + + pipe = usb_rcvisocpipe(dev->udev, + dev->isoc_in->desc.bEndpointAddress & + USB_ENDPOINT_NUMBER_MASK); + + size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe)); + + if (size > dev->max_isoc_in) + size = dev->max_isoc_in; + + dev->isoc_ctl.max_pkt_size = size; + + max_packets = ( framesize + size - 1) / size; + + if (max_packets > TM6000_MAX_ISO_PACKETS) + max_packets = TM6000_MAX_ISO_PACKETS; + + sb_size = max_packets * size; + + dev->isoc_ctl.num_bufs = num_bufs; + + dev->isoc_ctl.urb = kmalloc(sizeof(void *)*num_bufs, GFP_KERNEL); + if (!dev->isoc_ctl.urb) { + tm6000_err("cannot alloc memory for usb buffers\n"); + return -ENOMEM; + } + + dev->isoc_ctl.transfer_buffer = kmalloc(sizeof(void *)*num_bufs, + GFP_KERNEL); + if (!dev->isoc_ctl.urb) { + tm6000_err("cannot allocate memory for usbtransfer\n"); + kfree(dev->isoc_ctl.urb); + return -ENOMEM; + } + + dprintk(dev, V4L2_DEBUG_QUEUE, "Allocating %d x %d packets" + " (%d bytes) of %d bytes each to handle %u size\n", + max_packets, num_bufs, sb_size, + dev->max_isoc_in, size); + +#if 0 + /* reset streaming vars */ + dev->isoc_ctl.frame_current = NULL; + dev->isoc_ctl.frame_count = 0; +#endif + + /* allocate urbs and transfer buffers */ + for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { + urb = usb_alloc_urb(max_packets, GFP_KERNEL); + if (!urb) { + tm6000_err("cannot alloc isoc_ctl.urb %i\n", i); + tm6000_uninit_isoc(dev); + usb_free_urb(urb); + return -ENOMEM; + } + dev->isoc_ctl.urb[i] = urb; + + dev->isoc_ctl.transfer_buffer[i] = usb_buffer_alloc(dev->udev, + sb_size, GFP_KERNEL, &urb->transfer_dma); + if (!dev->isoc_ctl.transfer_buffer[i]) { + tm6000_err ("unable to allocate %i bytes for transfer" + " buffer %i%s\n", + sb_size, i, + in_interrupt()?" while in int":""); + tm6000_uninit_isoc(dev); + return -ENOMEM; + } + memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size); + + usb_fill_bulk_urb(urb, dev->udev, pipe, + dev->isoc_ctl.transfer_buffer[i], sb_size, + tm6000_irq_callback, dma_q); + urb->interval = dev->isoc_in->desc.bInterval; + urb->number_of_packets = max_packets; + urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; + + for (j = 0; j < max_packets; j++) { + urb->iso_frame_desc[j].offset = size * j; + urb->iso_frame_desc[j].length = size; + } + } + + return 0; +} + +static int tm6000_start_thread( struct tm6000_core *dev) +{ + struct tm6000_dmaqueue *dma_q = &dev->vidq; + int i; + + dma_q->frame=0; + dma_q->ini_jiffies=jiffies; + + init_waitqueue_head(&dma_q->wq); + + /* submit urbs and enables IRQ */ + for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { + int rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC); + if (rc) { + tm6000_err("submit of urb %i failed (error=%i)\n", i, + rc); + tm6000_uninit_isoc(dev); + return rc; + } + } + + return 0; +} + +/* ------------------------------------------------------------------ + Videobuf operations + ------------------------------------------------------------------*/ + +static int +buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size) +{ + struct tm6000_fh *fh = vq->priv_data; + + *size = fh->fmt->depth * fh->width * fh->height >> 3; + if (0 == *count) + *count = TM6000_DEF_BUF; + + if (*count < TM6000_MIN_BUF) { + *count=TM6000_MIN_BUF; + } + + while (*size * *count > vid_limit * 1024 * 1024) + (*count)--; + + return 0; +} + +static void free_buffer(struct videobuf_queue *vq, struct tm6000_buffer *buf) +{ + struct tm6000_fh *fh = vq->priv_data; + struct tm6000_core *dev = fh->dev; + unsigned long flags; + + if (in_interrupt()) + BUG(); + + /* We used to wait for the buffer to finish here, but this didn't work + because, as we were keeping the state as VIDEOBUF_QUEUED, + videobuf_queue_cancel marked it as finished for us. + (Also, it could wedge forever if the hardware was misconfigured.) + + This should be safe; by the time we get here, the buffer isn't + queued anymore. If we ever start marking the buffers as + VIDEOBUF_ACTIVE, it won't be, though. + */ + spin_lock_irqsave(&dev->slock, flags); + if (dev->isoc_ctl.buf == buf) + dev->isoc_ctl.buf = NULL; + spin_unlock_irqrestore(&dev->slock, flags); + + videobuf_vmalloc_free(&buf->vb); + buf->vb.state = VIDEOBUF_NEEDS_INIT; +} + +static int +buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct tm6000_fh *fh = vq->priv_data; + struct tm6000_buffer *buf = container_of(vb,struct tm6000_buffer,vb); + struct tm6000_core *dev = fh->dev; + int rc = 0, urb_init = 0; + + BUG_ON(NULL == fh->fmt); + +#if 0 + if (fh->width < norm_minw(core) || fh->width > norm_maxw(core) || + fh->height < norm_minh(core) || fh->height > norm_maxh(core)) { + dprintk(dev, V4L2_DEBUG_QUEUE, "Window size (%dx%d) is out of " + "supported range\n", fh->width, fh->height); + dprintk(dev, V4L2_DEBUG_QUEUE, "Valid range is from (%dx%d) to " + "(%dx%d)\n", norm_minw(core), norm_minh(core), + norm_maxw(core),norm_maxh(core)); + return -EINVAL; + } +#endif + + /* FIXME: It assumes depth=2 */ + /* The only currently supported format is 16 bits/pixel */ + buf->vb.size = fh->fmt->depth*fh->width*fh->height >> 3; + if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) + return -EINVAL; + + if (buf->fmt != fh->fmt || + buf->vb.width != fh->width || + buf->vb.height != fh->height || + buf->vb.field != field) { + buf->fmt = fh->fmt; + buf->vb.width = fh->width; + buf->vb.height = fh->height; + buf->vb.field = field; + buf->vb.state = VIDEOBUF_NEEDS_INIT; + } + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + if (0 != (rc = videobuf_iolock(vq, &buf->vb, NULL))) + goto fail; + urb_init = 1; + } + + if (!dev->isoc_ctl.num_bufs) + urb_init = 1; + + if (urb_init) { + rc = tm6000_prepare_isoc(dev, buf->vb.size); + if (rc < 0) + goto fail; + + rc = tm6000_start_thread(dev); + if (rc < 0) + goto fail; + + } + + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + +fail: + free_buffer(vq, buf); + return rc; +} + +static void +buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct tm6000_buffer *buf = container_of(vb,struct tm6000_buffer,vb); + struct tm6000_fh *fh = vq->priv_data; + struct tm6000_core *dev = fh->dev; + struct tm6000_dmaqueue *vidq = &dev->vidq; + + buf->vb.state = VIDEOBUF_QUEUED; + list_add_tail(&buf->vb.queue, &vidq->active); +} + +static void buffer_release(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct tm6000_buffer *buf = container_of(vb,struct tm6000_buffer,vb); + + free_buffer(vq,buf); +} + +static struct videobuf_queue_ops tm6000_video_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; + +/* ------------------------------------------------------------------ + IOCTL handling + ------------------------------------------------------------------*/ + +static int res_get(struct tm6000_core *dev, struct tm6000_fh *fh) +{ + /* is it free? */ + mutex_lock(&dev->lock); + if (dev->resources) { + /* no, someone else uses it */ + mutex_unlock(&dev->lock); + return 0; + } + /* it's free, grab it */ + dev->resources =1; + dprintk(dev, V4L2_DEBUG_RES_LOCK, "res: get\n"); + mutex_unlock(&dev->lock); + return 1; +} + +static int res_locked(struct tm6000_core *dev) +{ + return (dev->resources); +} + +static void res_free(struct tm6000_core *dev, struct tm6000_fh *fh) +{ + mutex_lock(&dev->lock); + dev->resources = 0; + dprintk(dev, V4L2_DEBUG_RES_LOCK, "res: put\n"); + mutex_unlock(&dev->lock); +} + +/* ------------------------------------------------------------------ + IOCTL vidioc handling + ------------------------------------------------------------------*/ +static int vidioc_querycap (struct file *file, void *priv, + struct v4l2_capability *cap) +{ + // struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev; + + strlcpy(cap->driver, "tm6000", sizeof(cap->driver)); + strlcpy(cap->card,"Trident TVMaster TM5600/6000", sizeof(cap->card)); + // strlcpy(cap->bus_info, dev->udev->dev.bus_id, sizeof(cap->bus_info)); + cap->version = TM6000_VERSION; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_STREAMING | + V4L2_CAP_TUNER | + V4L2_CAP_READWRITE; + return 0; +} + +static int vidioc_enum_fmt_vid_cap (struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (unlikely(f->index >= ARRAY_SIZE(format))) + return -EINVAL; + + strlcpy(f->description,format[f->index].name,sizeof(f->description)); + f->pixelformat = format[f->index].fourcc; + return 0; +} + +static int vidioc_g_fmt_vid_cap (struct file *file, void *priv, + struct v4l2_format *f) +{ + struct tm6000_fh *fh=priv; + + f->fmt.pix.width = fh->width; + f->fmt.pix.height = fh->height; + f->fmt.pix.field = fh->vb_vidq.field; + f->fmt.pix.pixelformat = fh->fmt->fourcc; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fh->fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + + return (0); +} + +static struct tm6000_fmt* format_by_fourcc(unsigned int fourcc) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(format); i++) + if (format[i].fourcc == fourcc) + return format+i; + return NULL; +} + +static int vidioc_try_fmt_vid_cap (struct file *file, void *priv, + struct v4l2_format *f) +{ + struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev; + struct tm6000_fmt *fmt; + enum v4l2_field field; + + fmt = format_by_fourcc(f->fmt.pix.pixelformat); + if (NULL == fmt) { + dprintk(dev, V4L2_DEBUG_IOCTL_ARG, "Fourcc format (0x%08x)" + " invalid.\n", f->fmt.pix.pixelformat); + return -EINVAL; + } + + field = f->fmt.pix.field; + + if (field == V4L2_FIELD_ANY) { +// field=V4L2_FIELD_INTERLACED; + field=V4L2_FIELD_SEQ_TB; + } else if (V4L2_FIELD_INTERLACED != field) { + dprintk(dev, V4L2_DEBUG_IOCTL_ARG, "Field type invalid.\n"); + return -EINVAL; + } + +#if 1 + tm6000_get_std_res (dev); + + f->fmt.pix.width = dev->width; + f->fmt.pix.height = dev->height; +#else + /* Scaling is not yet supported */ + if (f->fmt.pix.width < norm_minw(core)) + f->fmt.pix.width = norm_minw(core); + + if (f->fmt.pix.width > norm_maxw(core)) + f->fmt.pix.width = norm_maxw(core); + + if (f->fmt.pix.height < norm_minh(core)) + f->fmt.pix.height = norm_minh(core); + + if (f->fmt.pix.height > norm_maxh(core)) + f->fmt.pix.height = norm_maxh(core); +#endif + + f->fmt.pix.width &= ~0x01; + + f->fmt.pix.field = field; + + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + + return 0; +} + +/*FIXME: This seems to be generic enough to be at videodev2 */ +static int vidioc_s_fmt_vid_cap (struct file *file, void *priv, + struct v4l2_format *f) +{ + struct tm6000_fh *fh=priv; + struct tm6000_core *dev = fh->dev; + int ret = vidioc_try_fmt_vid_cap(file,fh,f); + if (ret < 0) + return (ret); + + fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat); + fh->width = f->fmt.pix.width; + fh->height = f->fmt.pix.height; + fh->vb_vidq.field = f->fmt.pix.field; + fh->type = f->type; + + dev->fourcc = f->fmt.pix.pixelformat; + + tm6000_set_fourcc_format(dev); + + return (0); +} + +static int vidioc_reqbufs (struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct tm6000_fh *fh=priv; + + return (videobuf_reqbufs(&fh->vb_vidq, p)); +} + +static int vidioc_querybuf (struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct tm6000_fh *fh=priv; + + return (videobuf_querybuf(&fh->vb_vidq, p)); +} + +static int vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct tm6000_fh *fh=priv; + + return (videobuf_qbuf(&fh->vb_vidq, p)); +} + +static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct tm6000_fh *fh=priv; + + return (videobuf_dqbuf(&fh->vb_vidq, p, + file->f_flags & O_NONBLOCK)); +} + +#ifdef CONFIG_VIDEO_V4L1_COMPAT +static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf) +{ + struct tm6000_fh *fh=priv; + + return videobuf_cgmbuf (&fh->vb_vidq, mbuf, 8); +} +#endif + +static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct tm6000_fh *fh=priv; + struct tm6000_core *dev = fh->dev; + + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (i != fh->type) + return -EINVAL; + + if (!res_get(dev,fh)) + return -EBUSY; + return (videobuf_streamon(&fh->vb_vidq)); +} + +static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct tm6000_fh *fh=priv; + struct tm6000_core *dev = fh->dev; + + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (i != fh->type) + return -EINVAL; + + videobuf_streamoff(&fh->vb_vidq); + res_free(dev,fh); + + return (0); +} + +static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *norm) +{ + int rc=0; + struct tm6000_fh *fh=priv; + struct tm6000_core *dev = fh->dev; + + rc=tm6000_set_standard (dev, norm); + +#if 1 + fh->width = dev->width; + fh->height = dev->height; +#endif + + if (rc<0) + return rc; + + v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm); + + return 0; +} + +static int vidioc_enum_input (struct file *file, void *priv, + struct v4l2_input *inp) +{ + switch (inp->index) { + case TM6000_INPUT_TV: + inp->type = V4L2_INPUT_TYPE_TUNER; + strcpy(inp->name,"Television"); + break; + case TM6000_INPUT_COMPOSITE: + inp->type = V4L2_INPUT_TYPE_CAMERA; + strcpy(inp->name,"Composite"); + break; + case TM6000_INPUT_SVIDEO: + inp->type = V4L2_INPUT_TYPE_CAMERA; + strcpy(inp->name,"S-Video"); + break; + default: + return -EINVAL; + } + inp->std = TM6000_STD; + + return 0; +} + +static int vidioc_g_input (struct file *file, void *priv, unsigned int *i) +{ + struct tm6000_fh *fh=priv; + struct tm6000_core *dev = fh->dev; + + *i=dev->input; + + return 0; +} +static int vidioc_s_input (struct file *file, void *priv, unsigned int i) +{ + struct tm6000_fh *fh=priv; + struct tm6000_core *dev = fh->dev; + int rc=0; + char buf[1]; + + switch (i) { + case TM6000_INPUT_TV: + dev->input=i; + *buf=0; + break; + case TM6000_INPUT_COMPOSITE: + case TM6000_INPUT_SVIDEO: + dev->input=i; + *buf=1; + break; + default: + return -EINVAL; + } + rc=tm6000_read_write_usb (dev, USB_DIR_OUT | USB_TYPE_VENDOR, + REQ_03_SET_GET_MCU_PIN, 0x03, 1, buf, 1); + + if (!rc) { + dev->input=i; + rc=vidioc_s_std (file, priv, &dev->vfd->current_norm); + } + + return (rc); +} + + /* --- controls ---------------------------------------------- */ +static int vidioc_queryctrl (struct file *file, void *priv, + struct v4l2_queryctrl *qc) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(tm6000_qctrl); i++) + if (qc->id && qc->id == tm6000_qctrl[i].id) { + memcpy(qc, &(tm6000_qctrl[i]), + sizeof(*qc)); + return (0); + } + + return -EINVAL; +} + +static int vidioc_g_ctrl (struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + struct tm6000_fh *fh=priv; + struct tm6000_core *dev = fh->dev; + int val; + + /* FIXME: Probably, those won't work! Maybe we need shadow regs */ + switch (ctrl->id) { + case V4L2_CID_CONTRAST: + val=tm6000_get_reg (dev, REQ_07_SET_GET_AVREG, 0x08, 0); + break; + case V4L2_CID_BRIGHTNESS: + val=tm6000_get_reg (dev, REQ_07_SET_GET_AVREG, 0x09, 0); + return 0; + case V4L2_CID_SATURATION: + val=tm6000_get_reg (dev, REQ_07_SET_GET_AVREG, 0x0a, 0); + return 0; + case V4L2_CID_HUE: + val=tm6000_get_reg (dev, REQ_07_SET_GET_AVREG, 0x0b, 0); + return 0; + default: + return -EINVAL; + } + + if (val<0) + return val; + + ctrl->value=val; + + return 0; +} +static int vidioc_s_ctrl (struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + struct tm6000_fh *fh =priv; + struct tm6000_core *dev = fh->dev; + u8 val=ctrl->value; + + switch (ctrl->id) { + case V4L2_CID_CONTRAST: + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x08, val); + return 0; + case V4L2_CID_BRIGHTNESS: + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x09, val); + return 0; + case V4L2_CID_SATURATION: + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x0a, val); + return 0; + case V4L2_CID_HUE: + tm6000_set_reg (dev, REQ_07_SET_GET_AVREG, 0x0b, val); + return 0; + } + return -EINVAL; +} + +static int vidioc_g_tuner (struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct tm6000_fh *fh =priv; + struct tm6000_core *dev = fh->dev; + + if (unlikely(UNSET == dev->tuner_type)) + return -EINVAL; + if (0 != t->index) + return -EINVAL; + + strcpy(t->name, "Television"); + t->type = V4L2_TUNER_ANALOG_TV; + t->capability = V4L2_TUNER_CAP_NORM; + t->rangehigh = 0xffffffffUL; + t->rxsubchans = V4L2_TUNER_SUB_MONO; + + return 0; +} + +static int vidioc_s_tuner (struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct tm6000_fh *fh =priv; + struct tm6000_core *dev = fh->dev; + + if (UNSET == dev->tuner_type) + return -EINVAL; + if (0 != t->index) + return -EINVAL; + + return 0; +} + +static int vidioc_g_frequency (struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct tm6000_fh *fh =priv; + struct tm6000_core *dev = fh->dev; + + if (unlikely(UNSET == dev->tuner_type)) + return -EINVAL; + + f->type = V4L2_TUNER_ANALOG_TV; + f->frequency = dev->freq; + + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_frequency, f); + + return 0; +} + +static int vidioc_s_frequency (struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct tm6000_fh *fh =priv; + struct tm6000_core *dev = fh->dev; + + if (unlikely(f->type != V4L2_TUNER_ANALOG_TV)) + return -EINVAL; + + if (unlikely(UNSET == dev->tuner_type)) + return -EINVAL; + if (unlikely(f->tuner != 0)) + return -EINVAL; + +// mutex_lock(&dev->lock); + dev->freq = f->frequency; + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, f); +// mutex_unlock(&dev->lock); + + return 0; +} + +/* ------------------------------------------------------------------ + File operations for the device + ------------------------------------------------------------------*/ + +static int tm6000_open(struct file *file) +{ + int minor = video_devdata(file)->minor; + struct tm6000_core *h,*dev = NULL; + struct tm6000_fh *fh; + struct list_head *list; + enum v4l2_buf_type type = 0; + int i,rc; + + printk(KERN_INFO "tm6000: open called (minor=%d)\n",minor); + + + dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: open called " + "(minor=%d)\n",minor); + + list_for_each(list,&tm6000_corelist) { + h = list_entry(list, struct tm6000_core, tm6000_corelist); + if (h->vfd->minor == minor) { + dev = h; + type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + } + } + if (NULL == dev) + return -ENODEV; + +#if 0 /* Avoids an oops at read() - seems to be semaphore related */ + if (dev->users) { + printk(KERN_INFO "this driver can be opened only once (users=%d)\n",dev->users); + return -EBUSY; + } +#endif + + /* If more than one user, mutex should be added */ + dev->users++; + + dprintk(dev, V4L2_DEBUG_OPEN, "open minor=%d type=%s users=%d\n", + minor,v4l2_type_names[type],dev->users); + + /* allocate + initialize per filehandle data */ + fh = kzalloc(sizeof(*fh),GFP_KERNEL); + if (NULL == fh) { + dev->users--; + return -ENOMEM; + } + + file->private_data = fh; + fh->dev = dev; + + fh->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + dev->fourcc = format[0].fourcc; + + fh->fmt = format_by_fourcc(dev->fourcc); + + tm6000_get_std_res (dev); + + fh->width = dev->width; + fh->height = dev->height; + + dprintk(dev, V4L2_DEBUG_OPEN, "Open: fh=0x%08lx, dev=0x%08lx, " + "dev->vidq=0x%08lx\n", + (unsigned long)fh,(unsigned long)dev,(unsigned long)&dev->vidq); + dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty " + "queued=%d\n",list_empty(&dev->vidq.queued)); + dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty " + "active=%d\n",list_empty(&dev->vidq.active)); + +#if 0 + /* Resets frame counters */ + sprintf(dev->timestr,"%02d:%02d:%02d:%03d", + dev->h,dev->m,dev->s,(dev->us+500)/1000); +#endif + /* initialize hardware on analog mode */ + if (dev->mode!=TM6000_MODE_ANALOG) { + rc=tm6000_init_analog_mode (dev); + if (rc<0) + return rc; + + /* Put all controls at a sane state */ + for (i = 0; i < ARRAY_SIZE(tm6000_qctrl); i++) + qctl_regs[i] =tm6000_qctrl[i].default_value; + + dev->mode=TM6000_MODE_ANALOG; + } + + videobuf_queue_vmalloc_init(&fh->vb_vidq, &tm6000_video_qops, + NULL, &dev->slock, + fh->type, + V4L2_FIELD_INTERLACED, + sizeof(struct tm6000_buffer),fh); + + return 0; +} + +static ssize_t +tm6000_read(struct file *file, char __user *data, size_t count, loff_t *pos) +{ + struct tm6000_fh *fh = file->private_data; + + if (fh->type==V4L2_BUF_TYPE_VIDEO_CAPTURE) { + if (res_locked(fh->dev)) + return -EBUSY; + + return videobuf_read_stream(&fh->vb_vidq, data, count, pos, 0, + file->f_flags & O_NONBLOCK); +#if 0 + return videobuf_read_one(&fh->vb_vidq, data, count, pos, + file->f_flags & O_NONBLOCK); +#endif + } + return 0; +} + +static unsigned int +tm6000_poll(struct file *file, struct poll_table_struct *wait) +{ + struct tm6000_fh *fh = file->private_data; + struct tm6000_buffer *buf; + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) + return POLLERR; + + if (res_get(fh->dev,fh)) { + /* streaming capture */ + if (list_empty(&fh->vb_vidq.stream)) + return POLLERR; + buf = list_entry(fh->vb_vidq.stream.next,struct tm6000_buffer,vb.stream); + } else { + /* read() capture */ +#if 0 + buf = (struct tm6000_buffer*)fh->vb_vidq.read_buf; + if (NULL == buf) + return POLLERR; +#else + return videobuf_poll_stream(file, &fh->vb_vidq, + wait); +#endif + } + poll_wait(file, &buf->vb.done, wait); + if (buf->vb.state == VIDEOBUF_DONE || + buf->vb.state == VIDEOBUF_ERROR) + return POLLIN|POLLRDNORM; + return 0; +} + +static int tm6000_release(struct file *file) +{ + struct tm6000_fh *fh = file->private_data; + struct tm6000_core *dev = fh->dev; + int minor = video_devdata(file)->minor; + + dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: close called (minor=%d, users=%d)\n",minor,dev->users); + + dev->users--; + + if (!dev->users) { + tm6000_uninit_isoc(dev); + videobuf_mmap_free(&fh->vb_vidq); + } + + kfree (fh); + + return 0; +} + +static int tm6000_mmap(struct file *file, struct vm_area_struct * vma) +{ + struct tm6000_fh *fh = file->private_data; + int ret; + + ret=videobuf_mmap_mapper(&fh->vb_vidq, vma); + + return ret; +} + +static struct v4l2_file_operations tm6000_fops = { + .owner = THIS_MODULE, + .open = tm6000_open, + .release = tm6000_release, + .ioctl = video_ioctl2, /* V4L2 ioctl handler */ + .read = tm6000_read, + .poll = tm6000_poll, + .mmap = tm6000_mmap, +}; + +static const struct v4l2_ioctl_ops video_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_s_std = vidioc_s_std, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, +#ifdef CONFIG_VIDEO_V4L1_COMPAT + .vidiocgmbuf = vidiocgmbuf, +#endif +}; + +static struct video_device tm6000_template = { + .name = "tm6000", + .fops = &tm6000_fops, + .ioctl_ops = &video_ioctl_ops, + .minor = -1, + .release = video_device_release, + .tvnorms = TM6000_STD, + .current_norm = V4L2_STD_NTSC_M, +}; + +/* ----------------------------------------------------------------- + Initialization and module stuff + ------------------------------------------------------------------*/ + +int tm6000_v4l2_register(struct tm6000_core *dev) +{ + int ret = -1; + struct video_device *vfd; + + vfd = video_device_alloc(); + if(!vfd) { + return -ENOMEM; + } + dev->vfd = vfd; + + list_add_tail(&dev->tm6000_corelist,&tm6000_corelist); + + /* init video dma queues */ + INIT_LIST_HEAD(&dev->vidq.active); + INIT_LIST_HEAD(&dev->vidq.queued); + + memcpy (dev->vfd, &tm6000_template, sizeof(*(dev->vfd))); + dev->vfd->debug=tm6000_debug; + vfd->v4l2_dev = &dev->v4l2_dev; + + ret = video_register_device(dev->vfd, VFL_TYPE_GRABBER, video_nr); + printk(KERN_INFO "Trident TVMaster TM5600/TM6000 USB2 board (Load status: %d)\n", ret); + return ret; +} + +int tm6000_v4l2_unregister(struct tm6000_core *dev) +{ + struct tm6000_core *h; + struct list_head *pos, *tmp; + + video_unregister_device(dev->vfd); + + list_for_each_safe(pos, tmp, &tm6000_corelist) { + h = list_entry(pos, struct tm6000_core, tm6000_corelist); + if (h == dev) { + list_del(pos); + } + } + + return 0; +} + +int tm6000_v4l2_exit(void) +{ +#if 0 + struct tm6000_core *h; + struct list_head *list; + + while (!list_empty(&tm6000_corelist)) { + list = tm6000_corelist.next; + list_del(list); + h = list_entry(list, struct tm6000_core, tm6000_corelist); + video_unregister_device(&h->vfd); + kfree (h); + } +#endif + return 0; +} + +module_param(video_nr, int, 0); +MODULE_PARM_DESC(video_nr,"Allow changing video device number"); + +module_param_named (debug, tm6000_debug, int, 0444); +MODULE_PARM_DESC(debug,"activates debug info"); + +module_param(vid_limit,int,0644); +MODULE_PARM_DESC(vid_limit,"capture memory limit in megabytes"); + diff --git a/linux/drivers/staging/tm6000/tm6000.h b/linux/drivers/staging/tm6000/tm6000.h new file mode 100644 index 000000000..ba0acd2a6 --- /dev/null +++ b/linux/drivers/staging/tm6000/tm6000.h @@ -0,0 +1,294 @@ +/* + tm6000.h - driver for TM5600/TM6000 USB video capture devices + + Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org> + + Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com> + - DVB-T support + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation version 2 + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +// Use the tm6000-hack, instead of the proper initialization code +//#define HACK 1 + +#include "compat.h" +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <media/videobuf-vmalloc.h> +#include "tm6000-usb-isoc.h" +#include <linux/i2c.h> +#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,15) +#include <linux/mutex.h> +#endif +#include <media/v4l2-device.h> + + +#include <linux/dvb/frontend.h> +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dmxdev.h" + +#define TM6000_VERSION KERNEL_VERSION(0, 0, 1) + +/* Inputs */ + +enum tm6000_itype { + TM6000_INPUT_TV = 0, + TM6000_INPUT_COMPOSITE, + TM6000_INPUT_SVIDEO, +}; + +enum tm6000_devtype { + TM6000 = 0, + TM5600, + TM6010, +}; + +/* ------------------------------------------------------------------ + Basic structures + ------------------------------------------------------------------*/ + +struct tm6000_fmt { + char *name; + u32 fourcc; /* v4l2 format id */ + int depth; +}; + +/* buffer for one video frame */ +struct tm6000_buffer { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + + struct tm6000_fmt *fmt; +}; + +struct tm6000_dmaqueue { + struct list_head active; + struct list_head queued; + + /* thread for generating video stream*/ + struct task_struct *kthread; + wait_queue_head_t wq; +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) + struct semaphore *notify; + int rmmod:1; +#endif + /* Counters to control fps rate */ + int frame; + int ini_jiffies; +}; + +/* device states */ +enum tm6000_core_state { + DEV_INITIALIZED = 0x01, + DEV_DISCONNECTED = 0x02, + DEV_MISCONFIGURED = 0x04, +}; + +#if 1 +/* io methods */ +enum tm6000_io_method { + IO_NONE, + IO_READ, + IO_MMAP, +}; +#endif + +enum tm6000_mode { + TM6000_MODE_UNKNOWN=0, + TM6000_MODE_ANALOG, + TM6000_MODE_DIGITAL, +}; + +struct tm6000_capabilities { + unsigned int has_tuner:1; + unsigned int has_tda9874:1; + unsigned int has_dvb:1; + unsigned int has_zl10353:1; + unsigned int has_eeprom:1; + unsigned int has_remote:1; +}; + +struct tm6000_dvb { + struct dvb_adapter adapter; + struct dvb_demux demux; + struct dvb_frontend *frontend; + struct dmxdev dmxdev; + unsigned int streams; + struct urb *bulk_urb; + struct mutex mutex; +}; + +struct tm6000_core { + /* generic device properties */ + char name[30]; /* name (including minor) of the device */ + int model; /* index in the device_data struct */ + int devno; /* marks the number of this device */ + enum tm6000_devtype dev_type; /* type of device */ + + v4l2_std_id norm; /* Current norm */ + int width,height; /* Selected resolution */ + + enum tm6000_core_state state; + + /* Device Capabilities*/ + struct tm6000_capabilities caps; + + /* Tuner configuration */ + int tuner_type; /* type of the tuner */ + int tuner_addr; /* tuner address */ + int tuner_reset_gpio; /* GPIO used for tuner reset */ + + /* Demodulator configuration */ + int demod_addr; /* demodulator address */ + + int audio_bitrate; + /* i2c i/o */ + struct i2c_adapter i2c_adap; + struct i2c_client i2c_client; + + /* video for linux */ + struct list_head tm6000_corelist; + int users; + + /* various device info */ + unsigned int resources; + struct video_device *vfd; + struct tm6000_dmaqueue vidq; + struct v4l2_device v4l2_dev; + + int input; + int freq; + unsigned int fourcc; + + enum tm6000_mode mode; + + /* DVB-T support */ + struct tm6000_dvb *dvb; + + /* locks */ + struct mutex lock; + + /* usb transfer */ + struct usb_device *udev; /* the usb device */ + + struct usb_host_endpoint *bulk_in, *bulk_out, *isoc_in, *isoc_out; + unsigned int max_bulk_in, max_bulk_out; + unsigned int max_isoc_in, max_isoc_out; + + /* scaler!=0 if scaler is active*/ + int scaler; + + /* Isoc control struct */ + struct usb_isoc_ctl isoc_ctl; + + spinlock_t slock; +}; + +struct tm6000_fh { + struct tm6000_core *dev; + + /* video capture */ + struct tm6000_fmt *fmt; + unsigned int width,height; + struct videobuf_queue vb_vidq; + + enum v4l2_buf_type type; +}; + +#define TM6000_STD V4L2_STD_PAL|V4L2_STD_PAL_N|V4L2_STD_PAL_Nc| \ + V4L2_STD_PAL_M|V4L2_STD_PAL_60|V4L2_STD_NTSC_M| \ + V4L2_STD_NTSC_M_JP|V4L2_STD_SECAM + +/* In tm6000-core.c */ + +int tm6000_read_write_usb (struct tm6000_core *dev, u8 reqtype, u8 req, + u16 value, u16 index, u8 *buf, u16 len); +int tm6000_get_reg (struct tm6000_core *dev, u8 req, u16 value, u16 index); +int tm6000_set_reg (struct tm6000_core *dev, u8 req, u16 value, u16 index); +int tm6000_init (struct tm6000_core *dev); +int tm6000_init_after_firmware (struct tm6000_core *dev); + +int tm6000_init_analog_mode (struct tm6000_core *dev); +int tm6000_init_digital_mode (struct tm6000_core *dev); +int tm6000_set_audio_bitrate (struct tm6000_core *dev, int bitrate); + +int tm6000_dvb_register(struct tm6000_core *dev); +void tm6000_dvb_unregister(struct tm6000_core *dev); + +int tm6000_v4l2_register(struct tm6000_core *dev); +int tm6000_v4l2_unregister(struct tm6000_core *dev); +int tm6000_v4l2_exit(void); +void tm6000_set_fourcc_format(struct tm6000_core *dev); + +/* In tm6000-stds.c */ +void tm6000_get_std_res(struct tm6000_core *dev); +int tm6000_set_standard (struct tm6000_core *dev, v4l2_std_id *norm); + +/* In tm6000-i2c.c */ +int tm6000_i2c_register(struct tm6000_core *dev); +int tm6000_i2c_unregister(struct tm6000_core *dev); + +#if 1 +/* In tm6000-queue.c */ +#if 0 +int tm6000_init_isoc(struct tm6000_core *dev, int max_packets); +void tm6000_uninit_isoc(struct tm6000_core *dev); +#endif + +int tm6000_v4l2_mmap(struct file *filp, struct vm_area_struct *vma); + +int tm6000_vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type i); +int tm6000_vidioc_streamoff(struct file *file, void *priv, + enum v4l2_buf_type i); +int tm6000_vidioc_reqbufs (struct file *file, void *priv, + struct v4l2_requestbuffers *rb); +int tm6000_vidioc_querybuf (struct file *file, void *priv, + struct v4l2_buffer *b); +int tm6000_vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *b); +int tm6000_vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *b); +ssize_t tm6000_v4l2_read(struct file *filp, char __user * buf, size_t count, + loff_t * f_pos); +unsigned int tm6000_v4l2_poll(struct file *file, + struct poll_table_struct *wait); +int tm6000_queue_init(struct tm6000_core *dev); + +/* In tm6000-alsa.c */ +int tm6000_audio_init(struct tm6000_core *dev, int idx); + + +/* Debug stuff */ + +extern int tm6000_debug; + +#define dprintk(dev, level, fmt, arg...) do {\ + if (tm6000_debug & level) \ + printk(KERN_INFO "(%lu) %s %s :"fmt, jiffies, \ + dev->name, __FUNCTION__ , ##arg); } while (0) + +#define V4L2_DEBUG_REG 0x0004 +#define V4L2_DEBUG_I2C 0x0008 +#define V4L2_DEBUG_QUEUE 0x0010 +#define V4L2_DEBUG_ISOC 0x0020 +#define V4L2_DEBUG_RES_LOCK 0x0040 /* Resource locking */ +#define V4L2_DEBUG_OPEN 0x0080 /* video open/close debug */ + +#define tm6000_err(fmt, arg...) do {\ + printk(KERN_ERR "tm6000 %s :"fmt, \ + __FUNCTION__ , ##arg); } while (0) + + +#endif diff --git a/linux/include/linux/videodev2.h b/linux/include/linux/videodev2.h index 9d61bae27..b8fb6c206 100644 --- a/linux/include/linux/videodev2.h +++ b/linux/include/linux/videodev2.h @@ -361,6 +361,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */ #define V4L2_PIX_FMT_OV511 v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */ #define V4L2_PIX_FMT_OV518 v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */ +#define V4L2_PIX_FMT_TM6000 v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */ /* * F O R M A T E N U M E R A T I O N diff --git a/linux/linux/drivers/staging/tm6000/tm6000-alsa.c b/linux/linux/drivers/staging/tm6000/tm6000-alsa.c new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/linux/linux/drivers/staging/tm6000/tm6000-alsa.c |