diff options
Diffstat (limited to 'linux')
41 files changed, 1153 insertions, 179 deletions
diff --git a/linux/Documentation/video4linux/CARDLIST.em28xx b/linux/Documentation/video4linux/CARDLIST.em28xx index a98a688c1..014d25523 100644 --- a/linux/Documentation/video4linux/CARDLIST.em28xx +++ b/linux/Documentation/video4linux/CARDLIST.em28xx @@ -65,3 +65,5 @@ 67 -> Terratec Grabby (em2860) [0ccd:0096] 68 -> Terratec AV350 (em2860) [0ccd:0084] 69 -> KWorld ATSC 315U HDTV TV Box (em2882) [eb1a:a313] + 70 -> Evga inDtube (em2882) + 71 -> Silvercrest Webcam 1.3mpix (em2820/em2840) diff --git a/linux/Documentation/video4linux/v4l2-framework.txt b/linux/Documentation/video4linux/v4l2-framework.txt index d54c1e4c6..ba4706afc 100644 --- a/linux/Documentation/video4linux/v4l2-framework.txt +++ b/linux/Documentation/video4linux/v4l2-framework.txt @@ -390,6 +390,30 @@ later date. It differs between i2c drivers and as such can be confusing. To see which chip variants are supported you can look in the i2c driver code for the i2c_device_id table. This lists all the possibilities. +There are two more helper functions: + +v4l2_i2c_new_subdev_cfg: this function adds new irq and platform_data +arguments and has both 'addr' and 'probed_addrs' arguments: if addr is not +0 then that will be used (non-probing variant), otherwise the probed_addrs +are probed. + +For example: this will probe for address 0x10: + +struct v4l2_subdev *sd = v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter, + "module_foo", "chipid", 0, NULL, 0, I2C_ADDRS(0x10)); + +v4l2_i2c_new_subdev_board uses an i2c_board_info struct which is passed +to the i2c driver and replaces the irq, platform_data and addr arguments. + +If the subdev supports the s_config core ops, then that op is called with +the irq and platform_data arguments after the subdev was setup. The older +v4l2_i2c_new_(probed_)subdev functions will call s_config as well, but with +irq set to 0 and platform_data set to NULL. + +Note that in the next kernel release the functions v4l2_i2c_new_subdev, +v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr will all be +replaced by a single v4l2_i2c_new_subdev that is identical to +v4l2_i2c_new_subdev_cfg but without the irq and platform_data arguments. struct video_device ------------------- diff --git a/linux/drivers/media/common/ir-keymaps.c b/linux/drivers/media/common/ir-keymaps.c index d5fd71968..56fa64b4c 100644 --- a/linux/drivers/media/common/ir-keymaps.c +++ b/linux/drivers/media/common/ir-keymaps.c @@ -2800,3 +2800,26 @@ IR_KEYTAB_TYPE ir_codes_dm1105_nec[IR_KEYTAB_SIZE] = { [0x1b] = KEY_B, /*recall*/ }; EXPORT_SYMBOL_GPL(ir_codes_dm1105_nec); + +/* EVGA inDtube + Devin Heitmueller <devin.heitmueller@gmail.com> + */ +IR_KEYTAB_TYPE ir_codes_evga_indtube[IR_KEYTAB_SIZE] = { + [0x12] = KEY_POWER, + [0x02] = KEY_MODE, /* TV */ + [0x14] = KEY_MUTE, + [0x1a] = KEY_CHANNELUP, + [0x16] = KEY_TV2, /* PIP */ + [0x1d] = KEY_VOLUMEUP, + [0x05] = KEY_CHANNELDOWN, + [0x0f] = KEY_PLAYPAUSE, + [0x19] = KEY_VOLUMEDOWN, + [0x1c] = KEY_REWIND, + [0x0d] = KEY_RECORD, + [0x18] = KEY_FORWARD, + [0x1e] = KEY_PREVIOUS, + [0x1b] = KEY_STOP, + [0x1f] = KEY_NEXT, + [0x13] = KEY_CAMERA, +}; +EXPORT_SYMBOL_GPL(ir_codes_evga_indtube); diff --git a/linux/drivers/media/dvb/frontends/stv0900.h b/linux/drivers/media/dvb/frontends/stv0900.h index 8a1332c20..bf4e9b633 100644 --- a/linux/drivers/media/dvb/frontends/stv0900.h +++ b/linux/drivers/media/dvb/frontends/stv0900.h @@ -29,6 +29,11 @@ #include <linux/dvb/frontend.h> #include "dvb_frontend.h" +struct stv0900_reg { + u16 addr; + u8 val; +}; + struct stv0900_config { u8 demod_address; u32 xtal; @@ -38,7 +43,7 @@ struct stv0900_config { u8 path1_mode; u8 path2_mode; - + struct stv0900_reg *ts_config_regs; u8 tun1_maddress;/* 0, 1, 2, 3 for 0xc0, 0xc2, 0xc4, 0xc6 */ u8 tun2_maddress; u8 tun1_adc;/* 1 for stv6110, 2 for stb6100 */ diff --git a/linux/drivers/media/dvb/frontends/stv0900_core.c b/linux/drivers/media/dvb/frontends/stv0900_core.c index 899b1e7ed..84bf35edb 100644 --- a/linux/drivers/media/dvb/frontends/stv0900_core.c +++ b/linux/drivers/media/dvb/frontends/stv0900_core.c @@ -149,31 +149,31 @@ void stv0900_write_reg(struct stv0900_internal *i_params, u16 reg_addr, dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret); } -u8 stv0900_read_reg(struct stv0900_internal *i_params, u16 reg_addr) +u8 stv0900_read_reg(struct stv0900_internal *i_params, u16 reg) { - u8 data[2]; int ret; - struct i2c_msg i2cmsg = { - .addr = i_params->i2c_addr, - .flags = 0, - .len = 2, - .buf = data, + u8 b0[] = { MSB(reg), LSB(reg) }; + u8 buf = 0; + struct i2c_msg msg[] = { + { + .addr = i_params->i2c_addr, + .flags = 0, + .buf = b0, + .len = 2, + }, { + .addr = i_params->i2c_addr, + .flags = I2C_M_RD, + .buf = &buf, + .len = 1, + }, }; - data[0] = MSB(reg_addr); - data[1] = LSB(reg_addr); - - ret = i2c_transfer(i_params->i2c_adap, &i2cmsg, 1); - if (ret != 1) - dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret); - - i2cmsg.flags = I2C_M_RD; - i2cmsg.len = 1; - ret = i2c_transfer(i_params->i2c_adap, &i2cmsg, 1); - if (ret != 1) - dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret); + ret = i2c_transfer(i_params->i2c_adap, msg, 2); + if (ret != 2) + dprintk(KERN_ERR "%s: i2c error %d, reg[0x%02x]\n", + __func__, ret, reg); - return data[0]; + return buf; } void extract_mask_pos(u32 label, u8 *mask, u8 *pos) @@ -716,6 +716,44 @@ static s32 stv0900_carr_get_quality(struct dvb_frontend *fe, return c_n; } +static int stv0900_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks) +{ + struct stv0900_state *state = fe->demodulator_priv; + struct stv0900_internal *i_params = state->internal; + enum fe_stv0900_demod_num demod = state->demod; + u8 err_val1, err_val0; + s32 err_field1, err_field0; + u32 header_err_val = 0; + + *ucblocks = 0x0; + if (stv0900_get_standard(fe, demod) == STV0900_DVBS2_STANDARD) { + /* DVB-S2 delineator errors count */ + + /* retreiving number for errnous headers */ + dmd_reg(err_field0, R0900_P1_BBFCRCKO0, + R0900_P2_BBFCRCKO0); + dmd_reg(err_field1, R0900_P1_BBFCRCKO1, + R0900_P2_BBFCRCKO1); + + err_val1 = stv0900_read_reg(i_params, err_field1); + err_val0 = stv0900_read_reg(i_params, err_field0); + header_err_val = (err_val1<<8) | err_val0; + + /* retreiving number for errnous packets */ + dmd_reg(err_field0, R0900_P1_UPCRCKO0, + R0900_P2_UPCRCKO0); + dmd_reg(err_field1, R0900_P1_UPCRCKO1, + R0900_P2_UPCRCKO1); + + err_val1 = stv0900_read_reg(i_params, err_field1); + err_val0 = stv0900_read_reg(i_params, err_field0); + *ucblocks = (err_val1<<8) | err_val0; + *ucblocks += header_err_val; + } + + return 0; +} + static int stv0900_read_snr(struct dvb_frontend *fe, u16 *snr) { *snr = stv0900_carr_get_quality(fe, @@ -1359,7 +1397,7 @@ static enum fe_stv0900_error stv0900_init_internal(struct dvb_frontend *fe, struct stv0900_state *state = fe->demodulator_priv; enum fe_stv0900_error error = STV0900_NO_ERROR; enum fe_stv0900_error demodError = STV0900_NO_ERROR; - int selosci; + int selosci, i; struct stv0900_inode *temp_int = find_inode(state->i2c_adap, state->config->demod_address); @@ -1406,7 +1444,23 @@ static enum fe_stv0900_error stv0900_init_internal(struct dvb_frontend *fe, stv0900_write_bits(state->internal, F0900_P1_ROLLOFF_CONTROL, p_init->rolloff); stv0900_write_bits(state->internal, F0900_P2_ROLLOFF_CONTROL, p_init->rolloff); - stv0900_set_ts_parallel_serial(state->internal, p_init->path1_ts_clock, p_init->path2_ts_clock); + state->internal->ts_config = p_init->ts_config; + if (state->internal->ts_config == NULL) + stv0900_set_ts_parallel_serial(state->internal, + p_init->path1_ts_clock, + p_init->path2_ts_clock); + else { + for (i = 0; state->internal->ts_config[i].addr != 0xffff; i++) + stv0900_write_reg(state->internal, + state->internal->ts_config[i].addr, + state->internal->ts_config[i].val); + + stv0900_write_bits(state->internal, F0900_P2_RST_HWARE, 1); + stv0900_write_bits(state->internal, F0900_P2_RST_HWARE, 0); + stv0900_write_bits(state->internal, F0900_P1_RST_HWARE, 1); + stv0900_write_bits(state->internal, F0900_P1_RST_HWARE, 0); + } + stv0900_write_bits(state->internal, F0900_P1_TUN_MADDRESS, p_init->tun1_maddress); switch (p_init->tuner1_adc) { case 1: @@ -1897,6 +1951,7 @@ static struct dvb_frontend_ops stv0900_ops = { .read_ber = stv0900_read_ber, .read_signal_strength = stv0900_read_signal_strength, .read_snr = stv0900_read_snr, + .read_ucblocks = stv0900_read_ucblocks, }; struct dvb_frontend *stv0900_attach(const struct stv0900_config *config, @@ -1930,6 +1985,7 @@ struct dvb_frontend *stv0900_attach(const struct stv0900_config *config, init_params.tun1_iq_inversion = STV0900_IQ_NORMAL; init_params.tuner1_adc = config->tun1_adc; init_params.path2_ts_clock = config->path2_mode; + init_params.ts_config = config->ts_config_regs; init_params.tun2_maddress = config->tun2_maddress; init_params.tuner2_adc = config->tun2_adc; init_params.tun2_iq_inversion = STV0900_IQ_SWAPPED; diff --git a/linux/drivers/media/dvb/frontends/stv0900_priv.h b/linux/drivers/media/dvb/frontends/stv0900_priv.h index 67dc8ec63..5ed7a145c 100644 --- a/linux/drivers/media/dvb/frontends/stv0900_priv.h +++ b/linux/drivers/media/dvb/frontends/stv0900_priv.h @@ -271,6 +271,7 @@ struct stv0900_init_params{ /* IQ from the tuner2 to the demod */ enum stv0900_iq_inversion tun2_iq_inversion; + struct stv0900_reg *ts_config; }; struct stv0900_search_params { @@ -363,6 +364,7 @@ struct stv0900_internal{ u8 i2c_addr; u8 clkmode;/* 0 for CLKI, 2 for XTALI */ u8 chip_id; + struct stv0900_reg *ts_config; enum fe_stv0900_error errs; int dmds_used; }; diff --git a/linux/drivers/media/dvb/frontends/stv090x.c b/linux/drivers/media/dvb/frontends/stv090x.c index 62078400f..8b152bea3 100644 --- a/linux/drivers/media/dvb/frontends/stv090x.c +++ b/linux/drivers/media/dvb/frontends/stv090x.c @@ -3405,7 +3405,7 @@ static u8 stv090x_optimize_carloop(struct stv090x_state *state, enum stv090x_mod static u8 stv090x_optimize_carloop_short(struct stv090x_state *state) { - struct stv090x_short_frame_crloop *short_crl; + struct stv090x_short_frame_crloop *short_crl = NULL; s32 index = 0; u8 aclc = 0x0b; @@ -3425,10 +3425,13 @@ static u8 stv090x_optimize_carloop_short(struct stv090x_state *state) break; } - if (state->dev_ver >= 0x30) - short_crl = stv090x_s2_short_crl_cut20; - else if (state->dev_ver >= 0x20) + if (state->dev_ver >= 0x30) { + /* Cut 3.0 and up */ short_crl = stv090x_s2_short_crl_cut30; + } else { + /* Cut 2.0 and up: we don't support cuts older than 2.0 */ + short_crl = stv090x_s2_short_crl_cut20; + } if (state->srate <= 3000000) aclc = short_crl[index].crl_2; diff --git a/linux/drivers/media/dvb/frontends/tda10048.c b/linux/drivers/media/dvb/frontends/tda10048.c index 04596baa9..edf5a19a3 100644 --- a/linux/drivers/media/dvb/frontends/tda10048.c +++ b/linux/drivers/media/dvb/frontends/tda10048.c @@ -210,6 +210,7 @@ static struct pll_tab { { TDA10048_CLK_4000, TDA10048_IF_36130, 10, 0, 0 }, { TDA10048_CLK_16000, TDA10048_IF_3300, 10, 3, 0 }, { TDA10048_CLK_16000, TDA10048_IF_3500, 10, 3, 0 }, + { TDA10048_CLK_16000, TDA10048_IF_3800, 10, 3, 0 }, { TDA10048_CLK_16000, TDA10048_IF_4000, 10, 3, 0 }, { TDA10048_CLK_16000, TDA10048_IF_4300, 10, 3, 0 }, { TDA10048_CLK_16000, TDA10048_IF_36130, 10, 3, 0 }, diff --git a/linux/drivers/media/dvb/siano/smscoreapi.c b/linux/drivers/media/dvb/siano/smscoreapi.c index e513408fc..54f59f24e 100644 --- a/linux/drivers/media/dvb/siano/smscoreapi.c +++ b/linux/drivers/media/dvb/siano/smscoreapi.c @@ -1477,8 +1477,8 @@ int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum, struct smscore_gpio_config *pGpioConfig) { u32 totalLen; - u32 TranslatedPinNum; - u32 GroupNum; + u32 TranslatedPinNum = 0; + u32 GroupNum = 0; u32 ElectricChar; u32 groupCfg; void *buffer; diff --git a/linux/drivers/media/radio/radio-tea5764.c b/linux/drivers/media/radio/radio-tea5764.c index 9194a70aa..83a5aff7b 100644 --- a/linux/drivers/media/radio/radio-tea5764.c +++ b/linux/drivers/media/radio/radio-tea5764.c @@ -326,7 +326,9 @@ static int vidioc_g_tuner(struct file *file, void *priv, v->rangehigh = FREQ_MAX * FREQ_MUL; v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; if (r->tunchk & TEA5764_TUNCHK_STEREO) - v->rxsubchans = V4L2_TUNER_SUB_STEREO; + v->rxsubchans = V4L2_TUNER_SUB_STEREO; + else + v->rxsubchans = V4L2_TUNER_SUB_MONO; v->audmode = tea5764_get_audout_mode(radio); v->signal = TEA5764_TUNCHK_LEVEL(r->tunchk) * 0xffff / 0xf; v->afc = TEA5764_TUNCHK_IFCNT(r->tunchk); diff --git a/linux/drivers/media/video/Kconfig b/linux/drivers/media/video/Kconfig index 061e147f6..84b6fc155 100644 --- a/linux/drivers/media/video/Kconfig +++ b/linux/drivers/media/video/Kconfig @@ -312,6 +312,14 @@ config VIDEO_OV7670 OV7670 VGA camera. It currently only works with the M88ALP01 controller. +config VIDEO_MT9V011 + tristate "Micron mt9v011 sensor support" + depends on I2C && VIDEO_V4L2 + ---help--- + This is a Video4Linux2 sensor-level driver for the Micron + mt0v011 1.3 Mpixel camera. It currently only works with the + em28xx driver. + config VIDEO_TCM825X tristate "TCM825x camera sensor support" depends on I2C && VIDEO_V4L2 diff --git a/linux/drivers/media/video/Makefile b/linux/drivers/media/video/Makefile index 7fb3add1b..9f2e3214a 100644 --- a/linux/drivers/media/video/Makefile +++ b/linux/drivers/media/video/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o obj-$(CONFIG_VIDEO_OV7670) += ov7670.o obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o +obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o obj-$(CONFIG_SOC_CAMERA_MT9M111) += mt9m111.o diff --git a/linux/drivers/media/video/cx18/cx18-controls.c b/linux/drivers/media/video/cx18/cx18-controls.c index 8e35c3aed..5136df198 100644 --- a/linux/drivers/media/video/cx18/cx18-controls.c +++ b/linux/drivers/media/video/cx18/cx18-controls.c @@ -61,6 +61,8 @@ int cx18_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl) switch (qctrl->id) { /* Standard V4L2 controls */ + case V4L2_CID_USER_CLASS: + return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0); case V4L2_CID_BRIGHTNESS: case V4L2_CID_HUE: case V4L2_CID_SATURATION: diff --git a/linux/drivers/media/video/cx231xx/cx231xx-avcore.c b/linux/drivers/media/video/cx231xx/cx231xx-avcore.c index bbbb3f50e..28f48f41f 100644 --- a/linux/drivers/media/video/cx231xx/cx231xx-avcore.c +++ b/linux/drivers/media/video/cx231xx/cx231xx-avcore.c @@ -2046,7 +2046,7 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type) int cx231xx_capture_start(struct cx231xx *dev, int start, u8 media_type) { - int rc; + int rc = -1; u32 ep_mask = -1; struct pcb_config *pcb_config; diff --git a/linux/drivers/media/video/cx2341x.c b/linux/drivers/media/video/cx2341x.c index 2cf0c5fee..8c468fc86 100644 --- a/linux/drivers/media/video/cx2341x.c +++ b/linux/drivers/media/video/cx2341x.c @@ -501,6 +501,8 @@ int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params, int err; switch (qctrl->id) { + case V4L2_CID_MPEG_CLASS: + return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0); case V4L2_CID_MPEG_STREAM_TYPE: return v4l2_ctrl_query_fill(qctrl, V4L2_MPEG_STREAM_TYPE_MPEG2_PS, diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c index 9c3259b22..71f196ec5 100644 --- a/linux/drivers/media/video/cx23885/cx23885-dvb.c +++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c @@ -46,6 +46,7 @@ #include "dibx000_common.h" #include "zl10353.h" #include "stv0900.h" +#include "stv0900_reg.h" #include "stv6110.h" #include "lnbh24.h" #include "cx24116.h" @@ -243,12 +244,22 @@ static struct tda18271_std_map hauppauge_tda18271_std_map = { .if_lvl = 6, .rfagc_top = 0x37 }, }; +static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = { + .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, + .if_lvl = 1, .rfagc_top = 0x37, }, +}; + static struct tda18271_config hauppauge_tda18271_config = { .std_map = &hauppauge_tda18271_std_map, .gate = TDA18271_GATE_ANALOG, }; static struct tda18271_config hauppauge_hvr1200_tuner_config = { + .std_map = &hauppauge_hvr1200_tda18271_std_map, .gate = TDA18271_GATE_ANALOG, }; @@ -371,13 +382,25 @@ static struct zl10353_config dvico_fusionhdtv_xc3028 = { .disable_i2c_gate_ctrl = 1, }; +static struct stv0900_reg stv0900_ts_regs[] = { + { R0900_TSGENERAL, 0x00 }, + { R0900_P1_TSSPEED, 0x40 }, + { R0900_P2_TSSPEED, 0x40 }, + { R0900_P1_TSCFGM, 0xc0 }, + { R0900_P2_TSCFGM, 0xc0 }, + { R0900_P1_TSCFGH, 0xe0 }, + { R0900_P2_TSCFGH, 0xe0 }, + { R0900_P1_TSCFGL, 0x20 }, + { R0900_P2_TSCFGL, 0x20 }, + { 0xffff, 0xff }, /* terminate */ +}; + static struct stv0900_config netup_stv0900_config = { .demod_address = 0x68, .xtal = 27000000, .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ .diseqc_mode = 2,/* 2/3 PWM */ - .path1_mode = 2,/*Serial continues clock */ - .path2_mode = 2,/*Serial continues clock */ + .ts_config_regs = stv0900_ts_regs, .tun1_maddress = 0,/* 0x60 */ .tun2_maddress = 3,/* 0x63 */ .tun1_adc = 1,/* 1 Vpp */ @@ -737,7 +760,8 @@ static int dvb_register(struct cx23885_tsport *port) if (!dvb_attach(lnbh24_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, - LNBH24_PCL, 0, 0x09)) + LNBH24_PCL, + LNBH24_TTX, 0x09)) printk(KERN_ERR "No LNBH24 found!\n"); @@ -757,7 +781,8 @@ static int dvb_register(struct cx23885_tsport *port) if (!dvb_attach(lnbh24_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, - LNBH24_PCL, 0, 0x0a)) + LNBH24_PCL, + LNBH24_TTX, 0x0a)) printk(KERN_ERR "No LNBH24 found!\n"); diff --git a/linux/drivers/media/video/em28xx/Kconfig b/linux/drivers/media/video/em28xx/Kconfig index 16a5af30e..6524b493e 100644 --- a/linux/drivers/media/video/em28xx/Kconfig +++ b/linux/drivers/media/video/em28xx/Kconfig @@ -8,6 +8,8 @@ config VIDEO_EM28XX select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_MT9V011 if VIDEO_HELPER_CHIPS_AUTO + ---help--- This is a video4linux driver for Empia 28xx based TV cards. diff --git a/linux/drivers/media/video/em28xx/em28xx-cards.c b/linux/drivers/media/video/em28xx/em28xx-cards.c index 16093680b..e78424f3a 100644 --- a/linux/drivers/media/video/em28xx/em28xx-cards.c +++ b/linux/drivers/media/video/em28xx/em28xx-cards.c @@ -152,6 +152,24 @@ static struct em28xx_reg_seq kworld_330u_digital[] = { { -1, -1, -1, -1}, }; +/* Evga inDtube + GPIO0 - Enable digital power (s5h1409) - low to enable + GPIO1 - Enable analog power (tvp5150/emp202) - low to enable + GPIO4 - xc3028 reset + GOP3 - s5h1409 reset + */ +static struct em28xx_reg_seq evga_indtube_analog[] = { + {EM28XX_R08_GPIO, 0x79, 0xff, 60}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq evga_indtube_digital[] = { + {EM28XX_R08_GPIO, 0x7a, 0xff, 1}, + {EM2880_R04_GPO, 0x04, 0xff, 10}, + {EM2880_R04_GPO, 0x0c, 0xff, 1}, + { -1, -1, -1, -1}, +}; + /* Callback for the most boards */ static struct em28xx_reg_seq default_tuner_gpio[] = { {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, @@ -186,6 +204,13 @@ static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { {EM28XX_R08_GPIO, 0xff, 0xff, 10}, { -1, -1, -1, -1}, }; + +static struct em28xx_reg_seq silvercrest_reg_seq[] = { + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM28XX_R08_GPIO, 0x01, 0xf7, 10}, + { -1, -1, -1, -1}, +}; + /* * Board definitions */ @@ -433,6 +458,18 @@ struct em28xx_board em28xx_boards[] = { .amux = EM28XX_AMUX_VIDEO, } }, }, + [EM2820_BOARD_SILVERCREST_WEBCAM] = { + .name = "Silvercrest Webcam 1.3mpix", + .tuner_type = TUNER_ABSENT, + .is_27xx = 1, + .decoder = EM28XX_MT9V011, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = silvercrest_reg_seq, + } }, + }, [EM2821_BOARD_SUPERCOMP_USB_2] = { .name = "Supercomp USB 2.0 TV", .valid = EM28XX_BOARD_NOT_VALIDATED, @@ -1514,6 +1551,33 @@ struct em28xx_board em28xx_boards[] = { .gpio = terratec_av350_unmute_gpio, } }, }, + [EM2882_BOARD_EVGA_INDTUBE] = { + .name = "Evga inDtube", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = evga_indtube_digital, + .ir_codes = ir_codes_evga_indtube, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = evga_indtube_analog, + }, { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = TVP5150_COMPOSITE1, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = evga_indtube_analog, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = EM28XX_AMUX_LINE_IN, + .gpio = evga_indtube_analog, + } }, + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -1640,6 +1704,7 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = { {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, {0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, + {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, }; /* I2C devicelist hash table for devices with generic USB IDs */ @@ -1662,6 +1727,11 @@ static unsigned short tvp5150_addrs[] = { I2C_CLIENT_END }; +static unsigned short mt9v011_addrs[] = { + 0xba >> 1, + I2C_CLIENT_END +}; + static unsigned short msp3400_addrs[] = { 0x80 >> 1, 0x88 >> 1, @@ -1729,7 +1799,10 @@ void em28xx_pre_card_setup(struct em28xx *dev) em28xx_info("chip ID is em2750\n"); break; case CHIP_ID_EM2820: - em28xx_info("chip ID is em2820\n"); + if (dev->board.is_27xx) + em28xx_info("chip is em2710\n"); + else + em28xx_info("chip ID is em2820\n"); break; case CHIP_ID_EM2840: em28xx_info("chip ID is em2840\n"); @@ -1903,6 +1976,10 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) ctl->demod = XC3028_FE_CHINA; ctl->fname = XC2028_DEFAULT_FIRMWARE; break; + case EM2882_BOARD_EVGA_INDTUBE: + ctl->demod = XC3028_FE_CHINA; + ctl->fname = XC3028L_DEFAULT_FIRMWARE; + break; default: ctl->demod = XC3028_FE_OREN538; } @@ -2204,7 +2281,17 @@ void em28xx_card_setup(struct em28xx *dev) case EM2880_BOARD_MSI_DIGIVOX_AD: if (!em28xx_hint_board(dev)) em28xx_set_model(dev); + + /* In cases where we had to use a board hint, the call to + em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, + so make the call now so the analog GPIOs are set properly + before probing the i2c bus. */ + em28xx_set_mode(dev, EM28XX_ANALOG_MODE); break; + case EM2820_BOARD_SILVERCREST_WEBCAM: + /* FIXME: need to document the registers bellow */ + em28xx_write_reg(dev, 0x0d, 0x42); + em28xx_write_reg(dev, 0x13, 0x08); } if (dev->board.has_snapshot_button) @@ -2236,6 +2323,10 @@ void em28xx_card_setup(struct em28xx *dev) v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvp5150", "tvp5150", tvp5150_addrs); + if (dev->board.decoder == EM28XX_MT9V011) + v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "mt9v011", "mt9v011", mt9v011_addrs); + if (dev->board.adecoder == EM28XX_TVAUDIO) v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, "tvaudio", "tvaudio", dev->board.tvaudio_addr); diff --git a/linux/drivers/media/video/em28xx/em28xx-core.c b/linux/drivers/media/video/em28xx/em28xx-core.c index 2bce72e4f..7ad8edff2 100644 --- a/linux/drivers/media/video/em28xx/em28xx-core.c +++ b/linux/drivers/media/video/em28xx/em28xx-core.c @@ -648,17 +648,29 @@ int em28xx_capture_start(struct em28xx *dev, int start) int em28xx_set_outfmt(struct em28xx *dev) { int ret; + int vinmode, vinctl, outfmt; + + outfmt = dev->format->reg; + + if (dev->board.is_27xx) { + vinmode = 0x0d; + vinctl = 0x00; + outfmt = 0x24; + } else { + vinmode = 0x10; + vinctl = 0x11; + } ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT, - dev->format->reg | 0x20, 0x3f); + outfmt | 0x20, 0xff); if (ret < 0) - return ret; + return ret; - ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, 0x10); + ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, vinmode); if (ret < 0) return ret; - return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x11); + return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctl); } static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax, @@ -695,13 +707,19 @@ static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v) { u8 mode; /* the em2800 scaler only supports scaling down to 50% */ - if (dev->board.is_em2800) + + if (dev->board.is_27xx) { + /* FIXME: Don't use the scaler yet */ + mode = 0; + } else if (dev->board.is_em2800) { mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00); - else { + } else { u8 buf[2]; + buf[0] = h; buf[1] = h >> 8; em28xx_write_regs(dev, EM28XX_R30_HSCALELOW, (char *)buf, 2); + buf[0] = v; buf[1] = v >> 8; em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2); @@ -720,8 +738,11 @@ int em28xx_resolution_set(struct em28xx *dev) height = norm_maxh(dev) >> 1; em28xx_set_outfmt(dev); + + em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2); em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2); + return em28xx_scaler_set(dev, dev->hscale, dev->vscale); } diff --git a/linux/drivers/media/video/em28xx/em28xx-dvb.c b/linux/drivers/media/video/em28xx/em28xx-dvb.c index 722cc709f..85afa0be0 100644 --- a/linux/drivers/media/video/em28xx/em28xx-dvb.c +++ b/linux/drivers/media/video/em28xx/em28xx-dvb.c @@ -446,6 +446,7 @@ static int dvb_init(struct em28xx *dev) } break; case EM2883_BOARD_KWORLD_HYBRID_330U: + case EM2882_BOARD_EVGA_INDTUBE: dvb->frontend = dvb_attach(s5h1409_attach, &em28xx_s5h1409_with_xc3028, &dev->i2c_adap); diff --git a/linux/drivers/media/video/em28xx/em28xx-video.c b/linux/drivers/media/video/em28xx/em28xx-video.c index 63d21698c..b4dde89e9 100644 --- a/linux/drivers/media/video/em28xx/em28xx-video.c +++ b/linux/drivers/media/video/em28xx/em28xx-video.c @@ -94,6 +94,49 @@ static struct em28xx_fmt format[] = { .fourcc = V4L2_PIX_FMT_YUYV, .depth = 16, .reg = EM28XX_OUTFMT_YUV422_Y0UY1V, + }, { + .name = "16 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_RGB565, + .depth = 16, + .reg = EM28XX_OUTFMT_YUV211, +#if 0 + /* TODO: need tests and newer definitions */ + }, { + .name = "Y1-U-Y0-V, 16 bpp", + .fourcc = 0, + .depth = 16, + .reg = EM28XX_OUTFMT_YUV422_Y1UY0V + }, { + .name = "YUV211, 8 bpp", + .fourcc = 0, + .depth = 8, + .reg = EM28XX_OUTFMT_YUV211, + }, { + .name = "YUV411, 12 bpp", + .fourcc = 0, + .depth = 12, + .reg = EM28XX_OUTFMT_YUV411, + }, { + .name = "RGB, 8bit RGRG", + .fourcc = 0, + .depth = 8, + .reg = EM28XX_OUTFMT_YUV211, + }, { + .name = "RGB, 8bit GRGR", + .fourcc = 0, + .depth = 8, + .reg = EM28XX_OUTFMT_YUV211, + }, { + .name = "RGB, 8bit GBGB", + .fourcc = 0, + .depth = 8, + .reg = EM28XX_OUTFMT_YUV211, + }, { + .name = "RGB, 8bit BGBG", + .fourcc = 0, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_BGBG, +#endif }, }; @@ -698,6 +741,10 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, unsigned int hscale, vscale; struct em28xx_fmt *fmt; + /* FIXME: This is the only supported fmt */ + if (dev->board.is_27xx) + f->fmt.pix.pixelformat = V4L2_PIX_FMT_RGB565; + fmt = format_by_fourcc(f->fmt.pix.pixelformat); if (!fmt) { em28xx_videodbg("Fourcc format (%08x) invalid.\n", @@ -705,7 +752,12 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return -EINVAL; } - if (dev->board.is_em2800) { + if (dev->board.is_27xx) { + /* FIXME: This is the only supported fmt */ + width = 640; + height = 480; + V4L2_PIX_FMT_RGB565; + } else if (dev->board.is_em2800) { /* the em2800 can only scale down to 50% */ height = height > (3 * maxh / 4) ? maxh : maxh / 2; width = width > (3 * maxw / 4) ? maxw : maxw / 2; @@ -751,6 +803,10 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, mutex_lock(&dev->lock); + /* FIXME: This is the only supported fmt */ + if (dev->board.is_27xx) + f->fmt.pix.pixelformat = V4L2_PIX_FMT_RGB565; + vidioc_try_fmt_vid_cap(file, priv, f); fmt = format_by_fourcc(f->fmt.pix.pixelformat); diff --git a/linux/drivers/media/video/em28xx/em28xx.h b/linux/drivers/media/video/em28xx/em28xx.h index aafc4a2d0..2eedfef53 100644 --- a/linux/drivers/media/video/em28xx/em28xx.h +++ b/linux/drivers/media/video/em28xx/em28xx.h @@ -107,6 +107,8 @@ #define EM2860_BOARD_TERRATEC_GRABBY 67 #define EM2860_BOARD_TERRATEC_AV350 68 #define EM2882_BOARD_KWORLD_ATSC_315U 69 +#define EM2882_BOARD_EVGA_INDTUBE 70 +#define EM2820_BOARD_SILVERCREST_WEBCAM 71 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 @@ -360,6 +362,7 @@ enum em28xx_decoder { EM28XX_NODECODER, EM28XX_TVP5150, EM28XX_SAA711X, + EM28XX_MT9V011, }; enum em28xx_adecoder { @@ -388,6 +391,7 @@ struct em28xx_board { unsigned int max_range_640_480:1; unsigned int has_dvb:1; unsigned int has_snapshot_button:1; + unsigned int is_27xx:1; unsigned int valid:1; unsigned char xclk, i2c_speed; diff --git a/linux/drivers/media/video/gspca/stv06xx/stv06xx.h b/linux/drivers/media/video/gspca/stv06xx/stv06xx.h index 9df7137fe..bb73c3288 100644 --- a/linux/drivers/media/video/gspca/stv06xx/stv06xx.h +++ b/linux/drivers/media/video/gspca/stv06xx/stv06xx.h @@ -31,6 +31,7 @@ #define STV06XX_H_ #include "gspca.h" +#include "compat.h" #define MODULE_NAME "STV06xx" diff --git a/linux/drivers/media/video/ivtv/ivtv-controls.c b/linux/drivers/media/video/ivtv/ivtv-controls.c index 84995bcf4..a3b77ed3f 100644 --- a/linux/drivers/media/video/ivtv/ivtv-controls.c +++ b/linux/drivers/media/video/ivtv/ivtv-controls.c @@ -60,6 +60,8 @@ int ivtv_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl) switch (qctrl->id) { /* Standard V4L2 controls */ + case V4L2_CID_USER_CLASS: + return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0); case V4L2_CID_BRIGHTNESS: case V4L2_CID_HUE: case V4L2_CID_SATURATION: diff --git a/linux/drivers/media/video/mt9v011.c b/linux/drivers/media/video/mt9v011.c new file mode 100644 index 000000000..d3f2b4dc5 --- /dev/null +++ b/linux/drivers/media/video/mt9v011.c @@ -0,0 +1,382 @@ +/* + * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor + * + * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#include <linux/i2c.h> +#include "compat.h" +#include <linux/videodev2.h> +#include <linux/delay.h> +#include <media/v4l2-device.h> +#include "mt9v011.h" +#include <media/v4l2-i2c-drv.h> +#include <media/v4l2-chip-ident.h> + +MODULE_DESCRIPTION("Micron mt9v011 sensor driver"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); +MODULE_LICENSE("GPL"); + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26) +/* standard i2c insmod options */ +static unsigned short normal_i2c[] = { + 0xba >> 1, + I2C_CLIENT_END +}; + +I2C_CLIENT_INSMOD; +#endif + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-2)"); + +/* supported controls */ +static struct v4l2_queryctrl mt9v011_qctrl[] = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = (1 << 10) - 1, + .step = 1, + .default_value = 0x0020, + .flags = 0, + }, { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Red Balance", + .minimum = -1 << 9, + .maximum = (1 << 9) - 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Blue Balance", + .minimum = -1 << 9, + .maximum = (1 << 9) - 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, +}; + +struct mt9v011 { + struct v4l2_subdev sd; + + u16 global_gain, red_bal, blue_bal; +}; + +static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd) +{ + return container_of(sd, struct mt9v011, sd); +} + +static int mt9v011_read(struct v4l2_subdev *sd, unsigned char addr) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + __be16 buffer; + int rc, val; + + rc = i2c_master_send(c, &addr, 1); + if (rc != 1) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 1)\n", rc); + + msleep(10); + + rc = i2c_master_recv(c, (char *)&buffer, 2); + if (rc != 2) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 2)\n", rc); + + val = be16_to_cpu(buffer); + + v4l2_dbg(2, debug, sd, "mt9v011: read 0x%02x = 0x%04x\n", addr, val); + + return val; +} + +static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr, + u16 value) +{ + struct i2c_client *c = v4l2_get_subdevdata(sd); + unsigned char buffer[3]; + int rc; + + buffer[0] = addr; + buffer[1] = value >> 8; + buffer[2] = value & 0xff; + + v4l2_dbg(2, debug, sd, + "mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value); + rc = i2c_master_send(c, &buffer, 3); + if (rc != 3) + v4l2_dbg(0, debug, sd, + "i2c i/o error: rc == %d (should be 3)\n", rc); +} + + +struct i2c_reg_value { + unsigned char reg; + u16 value; +}; + +/* + * Values used at the original driver + * Some values are marked as Reserved at the datasheet + */ +static const struct i2c_reg_value mt9v011_init_default[] = { + { R0D_MT9V011_RESET, 0x0001 }, + { R0D_MT9V011_RESET, 0x0000 }, + + { R01_MT9V011_ROWSTART, 0x0008 }, + { R02_MT9V011_COLSTART, 0x0014 }, + { R03_MT9V011_HEIGHT, 0x01e0 }, + { R04_MT9V011_WIDTH, 0x0280 }, + { R05_MT9V011_HBLANK, 0x007b }, + { R06_MT9V011_VBLANK, 0x001c }, + { R09_MT9V011_SHUTTER_WIDTH, 0x0418 }, + { R0A_MT9V011_CLK_SPEED, 0x0000 }, + { R0C_MT9V011_SHUTTER_DELAY, 0x0000 }, + { R1E_MT9V011_DIGITAL_ZOOM, 0x0000 }, + { R20_MT9V011_READ_MODE, 0x1100 }, + + /* + * Those registers are not docummented at the datasheet. + * However, the original driver initializes them + */ + { 0x30, 0x0005 }, + { 0x34, 0x0100 }, + { 0x3d, 0x068f }, + { 0x40, 0x01e0 }, + { 0x52, 0x0100 }, + { 0x58, 0x0038 }, /* Datasheet default 0x0078 */ + { 0x59, 0x0723 }, /* Datasheet default 0x0703 */ + { 0x62, 0x041a }, /* Datasheet default 0x0418 */ + + { R07_MT9V011_OUT_CTRL, 0x000a }, /* chip enable */ +}; + +static void set_balance(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + u16 green1_gain, green2_gain, blue_gain, red_gain; + + green1_gain = core->global_gain; + green2_gain = core->global_gain; + + blue_gain = core->global_gain + + core->global_gain * core->blue_bal / (1 << 9); + + red_gain = core->global_gain + + core->global_gain * core->blue_bal / (1 << 9); + + mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green1_gain); + mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green1_gain); + mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain); + mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain); +} + +static int mt9v011_reset(struct v4l2_subdev *sd, u32 val) +{ + u16 version; + int i; + + version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION); + + if (version != MT9V011_VERSION) { + v4l2_info(sd, "*** unknown micron chip detected (0x%04x.\n", + version); + return -EINVAL; + + } + + for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++) + mt9v011_write(sd, mt9v011_init_default[i].reg, + mt9v011_init_default[i].value); + + set_balance(sd); + + return 0; +}; + +static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct mt9v011 *core = to_mt9v011(sd); + + v4l2_dbg(1, debug, sd, "g_ctrl called\n"); + + switch (ctrl->id) { + case V4L2_CID_GAIN: + ctrl->value = core->global_gain; + return 0; + case V4L2_CID_RED_BALANCE: + ctrl->value = core->red_bal; + return 0; + case V4L2_CID_BLUE_BALANCE: + ctrl->value = core->blue_bal; + return 0; + } + return -EINVAL; +} + +static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct mt9v011 *core = to_mt9v011(sd); + u8 i, n; + n = ARRAY_SIZE(mt9v011_qctrl); + + for (i = 0; i < n; i++) { + if (ctrl->id != mt9v011_qctrl[i].id) + continue; + if (ctrl->value < mt9v011_qctrl[i].minimum || + ctrl->value > mt9v011_qctrl[i].maximum) + return -ERANGE; + v4l2_dbg(1, debug, sd, "s_ctrl: id=%d, value=%d\n", + ctrl->id, ctrl->value); + break; + } + + switch (ctrl->id) { + case V4L2_CID_GAIN: + core->global_gain = ctrl->value; + break; + case V4L2_CID_RED_BALANCE: + core->red_bal = ctrl->value; + break; + case V4L2_CID_BLUE_BALANCE: + core->blue_bal = ctrl->value; + break; + default: + return -EINVAL; + } + + set_balance(sd); + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mt9v011_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + reg->val = mt9v011_read(sd, reg->reg & 0xff); + reg->size = 2; + + return 0; +} + +static int mt9v011_s_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (!v4l2_chip_match_i2c_client(client, ®->match)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + mt9v011_write(sd, reg->reg & 0xff, reg->val & 0xffff); + + return 0; +} +#endif + +static int mt9v011_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011, + MT9V011_VERSION); +} + +static const struct v4l2_subdev_core_ops mt9v011_core_ops = { + .g_ctrl = mt9v011_g_ctrl, + .s_ctrl = mt9v011_s_ctrl, + .reset = mt9v011_reset, + .g_chip_ident = mt9v011_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = mt9v011_g_register, + .s_register = mt9v011_s_register, +#endif +}; + +static const struct v4l2_subdev_ops mt9v011_ops = { + .core = &mt9v011_core_ops, +}; + + +/**************************************************************************** + I2C Client & Driver + ****************************************************************************/ + +static int mt9v011_probe(struct i2c_client *c, + const struct i2c_device_id *id) +{ + struct mt9v011 *core; + struct v4l2_subdev *sd; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(c->adapter, + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + core = kzalloc(sizeof(struct mt9v011), GFP_KERNEL); + if (!core) + return -ENOMEM; + + core->global_gain = 0x0024; + + sd = &core->sd; + v4l2_i2c_subdev_init(sd, c, &mt9v011_ops); + v4l_info(c, "chip found @ 0x%02x (%s)\n", + c->addr << 1, c->adapter->name); + + return 0; +} + +static int mt9v011_remove(struct i2c_client *c) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(c); + + v4l2_dbg(1, debug, sd, + "mt9v011.c: removing mt9v011 adapter on address 0x%x\n", + c->addr << 1); + + v4l2_device_unregister_subdev(sd); + kfree(to_mt9v011(sd)); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26) +static const struct i2c_device_id mt9v011_id[] = { + { "mt9v011", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9v011_id); + +#endif +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "mt9v011", + .probe = mt9v011_probe, + .remove = mt9v011_remove, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26) + .legacy_class = I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL, +#else + .id_table = mt9v011_id, +#endif +}; diff --git a/linux/drivers/media/video/mt9v011.h b/linux/drivers/media/video/mt9v011.h new file mode 100644 index 000000000..9e443ee30 --- /dev/null +++ b/linux/drivers/media/video/mt9v011.h @@ -0,0 +1,35 @@ +/* + * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor + * + * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) + * This code is placed under the terms of the GNU General Public License v2 + */ + +#ifndef MT9V011_H_ +#define MT9V011_H_ + +#define R00_MT9V011_CHIP_VERSION 0x00 +#define R01_MT9V011_ROWSTART 0x01 +#define R02_MT9V011_COLSTART 0x02 +#define R03_MT9V011_HEIGHT 0x03 +#define R04_MT9V011_WIDTH 0x04 +#define R05_MT9V011_HBLANK 0x05 +#define R06_MT9V011_VBLANK 0x06 +#define R07_MT9V011_OUT_CTRL 0x07 +#define R09_MT9V011_SHUTTER_WIDTH 0x09 +#define R0A_MT9V011_CLK_SPEED 0x0a +#define R0B_MT9V011_RESTART 0x0b +#define R0C_MT9V011_SHUTTER_DELAY 0x0c +#define R0D_MT9V011_RESET 0x0d +#define R1E_MT9V011_DIGITAL_ZOOM 0x1e +#define R20_MT9V011_READ_MODE 0x20 +#define R2B_MT9V011_GREEN_1_GAIN 0x2b +#define R2C_MT9V011_BLUE_GAIN 0x2c +#define R2D_MT9V011_RED_GAIN 0x2d +#define R2E_MT9V011_GREEN_2_GAIN 0x2e +#define R35_MT9V011_GLOBAL_GAIN 0x35 +#define RF1_MT9V011_CHIP_ENABLE 0xf1 + +#define MT9V011_VERSION 0x8243 + +#endif diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-audio.c b/linux/drivers/media/video/pvrusb2/pvrusb2-audio.c index 86049f412..42875ec21 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-audio.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-audio.c @@ -49,11 +49,13 @@ static const int routing_scheme0[] = { MSP_DSP_IN_SCART), }; -static const struct routing_scheme routing_schemes[] = { - [PVR2_ROUTING_SCHEME_HAUPPAUGE] = { - .def = routing_scheme0, - .cnt = ARRAY_SIZE(routing_scheme0), - }, +static const struct routing_scheme routing_def0 = { + .def = routing_scheme0, + .cnt = ARRAY_SIZE(routing_scheme0), +}; + +static const struct routing_scheme *routing_schemes[] = { + [PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0, }; void pvr2_msp3400_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) @@ -66,7 +68,7 @@ void pvr2_msp3400_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) pvr2_trace(PVR2_TRACE_CHIPS, "subdev msp3400 v4l2 set_stereo"); if ((sid < ARRAY_SIZE(routing_schemes)) && - ((sp = routing_schemes + sid) != NULL) && + ((sp = routing_schemes[sid]) != NULL) && (hdw->input_val >= 0) && (hdw->input_val < sp->cnt)) { input = sp->def[hdw->input_val]; diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c b/linux/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c index f99b77c92..7bcaa0cd4 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-cs53l32a.c @@ -50,11 +50,13 @@ static const int routing_scheme1[] = { [PVR2_CVAL_INPUT_SVIDEO] = 0, }; -static const struct routing_scheme routing_schemes[] = { - [PVR2_ROUTING_SCHEME_ONAIR] = { - .def = routing_scheme1, - .cnt = ARRAY_SIZE(routing_scheme1), - }, +static const struct routing_scheme routing_def1 = { + .def = routing_scheme1, + .cnt = ARRAY_SIZE(routing_scheme1), +}; + +static const struct routing_scheme *routing_schemes[] = { + [PVR2_ROUTING_SCHEME_ONAIR] = &routing_def1, }; @@ -66,12 +68,11 @@ void pvr2_cs53l32a_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) u32 input; pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_input(%d)", hdw->input_val); - if ((sid < ARRAY_SIZE(routing_schemes)) && - ((sp = routing_schemes + sid) != NULL) && - (hdw->input_val >= 0) && - (hdw->input_val < sp->cnt)) { - input = sp->def[hdw->input_val]; - } else { + sp = (sid < ARRAY_SIZE(routing_schemes)) ? + routing_schemes[sid] : NULL; + if ((sp == NULL) || + (hdw->input_val < 0) || + (hdw->input_val >= sp->cnt)) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, "*** WARNING *** subdev v4l2 set_input:" " Invalid routing scheme (%u)" @@ -79,6 +80,7 @@ void pvr2_cs53l32a_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) sid, hdw->input_val); return; } + input = sp->def[hdw->input_val]; sd->ops->audio->s_routing(sd, input, 0, 0); } } diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c b/linux/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c index ef47c3874..e15d7fb6c 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c @@ -69,6 +69,11 @@ static const struct routing_scheme_item routing_scheme0[] = { }, }; +static const struct routing_scheme routing_def0 = { + .def = routing_scheme0, + .cnt = ARRAY_SIZE(routing_scheme0), +}; + /* Specific to gotview device */ static const struct routing_scheme_item routing_schemegv[] = { [PVR2_CVAL_INPUT_TV] = { @@ -91,15 +96,14 @@ static const struct routing_scheme_item routing_schemegv[] = { }, }; -static const struct routing_scheme routing_schemes[] = { - [PVR2_ROUTING_SCHEME_HAUPPAUGE] = { - .def = routing_scheme0, - .cnt = ARRAY_SIZE(routing_scheme0), - }, - [PVR2_ROUTING_SCHEME_GOTVIEW] = { - .def = routing_schemegv, - .cnt = ARRAY_SIZE(routing_schemegv), - }, +static const struct routing_scheme routing_defgv = { + .def = routing_schemegv, + .cnt = ARRAY_SIZE(routing_schemegv), +}; + +static const struct routing_scheme *routing_schemes[] = { + [PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0, + [PVR2_ROUTING_SCHEME_GOTVIEW] = &routing_defgv, }; void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) @@ -111,13 +115,11 @@ void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) const struct routing_scheme *sp; unsigned int sid = hdw->hdw_desc->signal_routing_scheme; - if ((sid < ARRAY_SIZE(routing_schemes)) && - ((sp = routing_schemes + sid) != NULL) && - (hdw->input_val >= 0) && - (hdw->input_val < sp->cnt)) { - vid_input = sp->def[hdw->input_val].vid; - aud_input = sp->def[hdw->input_val].aud; - } else { + sp = (sid < ARRAY_SIZE(routing_schemes)) ? + routing_schemes[sid] : NULL; + if ((sp == NULL) || + (hdw->input_val < 0) || + (hdw->input_val >= sp->cnt)) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, "*** WARNING *** subdev cx2584x set_input:" " Invalid routing scheme (%u)" @@ -125,7 +127,8 @@ void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) sid, hdw->input_val); return; } - + vid_input = sp->def[hdw->input_val].vid; + aud_input = sp->def[hdw->input_val].aud; pvr2_trace(PVR2_TRACE_CHIPS, "subdev cx2584x set_input vid=0x%x aud=0x%x", vid_input, aud_input); diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 3411cb36a..0bbd20f13 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -86,8 +86,8 @@ MODULE_PARM_DESC(video_std,"specify initial video standard"); module_param_array(tolerance, int, NULL, 0444); MODULE_PARM_DESC(tolerance,"specify stream error tolerance"); -/* US Broadcast channel 7 (175.25 MHz) */ -static int default_tv_freq = 175250000L; +/* US Broadcast channel 3 (61.25 MHz), to help with testing */ +static int default_tv_freq = 61250000L; /* 104.3 MHz, a usable FM station for my area */ static int default_radio_freq = 104300000L; @@ -2004,6 +2004,34 @@ static unsigned int pvr2_copy_i2c_addr_list( } +static void pvr2_hdw_cx25840_vbi_hack(struct pvr2_hdw *hdw) +{ + /* + Mike Isely <isely@pobox.com> 19-Nov-2006 - This bit of nuttiness + for cx25840 causes that module to correctly set up its video + scaling. This is really a problem in the cx25840 module itself, + but we work around it here. The problem has not been seen in + ivtv because there VBI is supported and set up. We don't do VBI + here (at least not yet) and thus we never attempted to even set + it up. + */ + struct v4l2_format fmt; + if (hdw->decoder_client_id != PVR2_CLIENT_ID_CX25840) { + /* We're not using a cx25840 so don't enable the hack */ + return; + } + + pvr2_trace(PVR2_TRACE_INIT, + "Module ID %u:" + " Executing cx25840 VBI hack", + hdw->decoder_client_id); + memset(&fmt, 0, sizeof(fmt)); + fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; + v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id, + video, s_fmt, &fmt); +} + + static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw, const struct pvr2_device_client_desc *cd) { @@ -2095,30 +2123,6 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw, /* client-specific setup... */ switch (mid) { case PVR2_CLIENT_ID_CX25840: - hdw->decoder_client_id = mid; - { - /* - Mike Isely <isely@pobox.com> 19-Nov-2006 - This - bit of nuttiness for cx25840 causes that module - to correctly set up its video scaling. This is - really a problem in the cx25840 module itself, - but we work around it here. The problem has not - been seen in ivtv because there VBI is supported - and set up. We don't do VBI here (at least not - yet) and thus we never attempted to even set it - up. - */ - struct v4l2_format fmt; - pvr2_trace(PVR2_TRACE_INIT, - "Module ID %u:" - " Executing cx25840 VBI hack", - mid); - memset(&fmt, 0, sizeof(fmt)); - fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; - v4l2_device_call_all(&hdw->v4l2_dev, mid, - video, s_fmt, &fmt); - } - break; case PVR2_CLIENT_ID_SAA7115: hdw->decoder_client_id = mid; break; @@ -2219,6 +2223,8 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) cptr->info->set_value(cptr,~0,cptr->info->default_value); } + pvr2_hdw_cx25840_vbi_hack(hdw); + /* Set up special default values for the television and radio frequencies here. It's not really important what these defaults are, but I set them to something usable in the Chicago area just @@ -2976,6 +2982,7 @@ static void pvr2_subdev_update(struct pvr2_hdw *hdw) vs = hdw->std_mask_cur; v4l2_device_call_all(&hdw->v4l2_dev, 0, core, s_std, vs); + pvr2_hdw_cx25840_vbi_hack(hdw); } hdw->tuner_signal_stale = !0; hdw->cropcap_stale = !0; @@ -4170,6 +4177,7 @@ int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw) if (hdw->decoder_client_id) { v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id, core, reset, 0); + pvr2_hdw_cx25840_vbi_hack(hdw); return 0; } pvr2_trace(PVR2_TRACE_INIT, diff --git a/linux/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c b/linux/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c index d240331a6..4be489c45 100644 --- a/linux/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c +++ b/linux/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c @@ -55,6 +55,11 @@ static const int routing_scheme0[] = { [PVR2_CVAL_INPUT_SVIDEO] = SAA7115_SVIDEO2, }; +static const struct routing_scheme routing_def0 = { + .def = routing_scheme0, + .cnt = ARRAY_SIZE(routing_scheme0), +}; + static const int routing_scheme1[] = { [PVR2_CVAL_INPUT_TV] = SAA7115_COMPOSITE4, [PVR2_CVAL_INPUT_RADIO] = SAA7115_COMPOSITE5, @@ -62,15 +67,14 @@ static const int routing_scheme1[] = { [PVR2_CVAL_INPUT_SVIDEO] = SAA7115_SVIDEO2, /* or SVIDEO0, it seems */ }; -static const struct routing_scheme routing_schemes[] = { - [PVR2_ROUTING_SCHEME_HAUPPAUGE] = { - .def = routing_scheme0, - .cnt = ARRAY_SIZE(routing_scheme0), - }, - [PVR2_ROUTING_SCHEME_ONAIR] = { - .def = routing_scheme1, - .cnt = ARRAY_SIZE(routing_scheme1), - }, +static const struct routing_scheme routing_def1 = { + .def = routing_scheme1, + .cnt = ARRAY_SIZE(routing_scheme1), +}; + +static const struct routing_scheme *routing_schemes[] = { + [PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0, + [PVR2_ROUTING_SCHEME_ONAIR] = &routing_def1, }; void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) @@ -82,12 +86,12 @@ void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_input(%d)", hdw->input_val); - if ((sid < ARRAY_SIZE(routing_schemes)) && - ((sp = routing_schemes + sid) != NULL) && - (hdw->input_val >= 0) && - (hdw->input_val < sp->cnt)) { - input = sp->def[hdw->input_val]; - } else { + + sp = (sid < ARRAY_SIZE(routing_schemes)) ? + routing_schemes[sid] : NULL; + if ((sp == NULL) || + (hdw->input_val < 0) || + (hdw->input_val >= sp->cnt)) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, "*** WARNING *** subdev v4l2 set_input:" " Invalid routing scheme (%u)" @@ -95,6 +99,7 @@ void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) sid, hdw->input_val); return; } + input = sp->def[hdw->input_val]; sd->ops->video->s_routing(sd, input, 0, 0); } } diff --git a/linux/drivers/media/video/tcm825x.c b/linux/drivers/media/video/tcm825x.c index 559ade821..d778c41ef 100644 --- a/linux/drivers/media/video/tcm825x.c +++ b/linux/drivers/media/video/tcm825x.c @@ -882,7 +882,7 @@ static int tcm825x_probe(struct i2c_client *client, return rval; } -static int __exit tcm825x_remove(struct i2c_client *client) +static int tcm825x_remove(struct i2c_client *client) { struct tcm825x_sensor *sensor = i2c_get_clientdata(client); @@ -908,7 +908,7 @@ static struct i2c_driver tcm825x_i2c_driver = { .name = TCM825X_NAME, }, .probe = tcm825x_probe, - .remove = __exit_p(tcm825x_remove), + .remove = tcm825x_remove, #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26) .id_table = tcm825x_id, #endif diff --git a/linux/drivers/media/video/v4l2-common.c b/linux/drivers/media/video/v4l2-common.c index f94b5d92a..ab91734b1 100644 --- a/linux/drivers/media/video/v4l2-common.c +++ b/linux/drivers/media/video/v4l2-common.c @@ -868,6 +868,17 @@ struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev, /* Decrease the module use count to match the first try_module_get. */ module_put(client->driver->driver.owner); + if (sd) { + /* We return errors from v4l2_subdev_call only if we have the + callback as the .s_config is not mandatory */ + int err = v4l2_subdev_call(sd, core, s_config, 0, NULL); + + if (err && err != -ENOIOCTLCMD) { + v4l2_device_unregister_subdev(sd); + sd = NULL; + } + } + error: #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26) /* If we have a client but no subdev, then something went wrong and @@ -931,6 +942,17 @@ struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct v4l2_device *v4l2_dev, /* Decrease the module use count to match the first try_module_get. */ module_put(client->driver->driver.owner); + if (sd) { + /* We return errors from v4l2_subdev_call only if we have the + callback as the .s_config is not mandatory */ + int err = v4l2_subdev_call(sd, core, s_config, 0, NULL); + + if (err && err != -ENOIOCTLCMD) { + v4l2_device_unregister_subdev(sd); + sd = NULL; + } + } + error: #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26) /* If we have a client but no subdev, then something went wrong and @@ -953,6 +975,150 @@ struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev } EXPORT_SYMBOL_GPL(v4l2_i2c_new_probed_subdev_addr); +/* Load an i2c sub-device. */ +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26) +struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, const char *module_name, + struct i2c_board_info *info, const unsigned short *probe_addrs) +{ + struct v4l2_subdev *sd = NULL; + struct i2c_client *client; + + BUG_ON(!v4l2_dev); + + if (module_name) + request_module(module_name); + + /* Create the i2c client */ + if (info->addr == 0 && probe_addrs) + client = i2c_new_probed_device(adapter, info, probe_addrs); + else + client = i2c_new_device(adapter, info); + + /* Note: by loading the module first we are certain that c->driver + will be set if the driver was found. If the module was not loaded + first, then the i2c core tries to delay-load the module for us, + and then c->driver is still NULL until the module is finally + loaded. This delay-load mechanism doesn't work if other drivers + want to use the i2c device, so explicitly loading the module + is the best alternative. */ + if (client == NULL || client->driver == NULL) + goto error; + + /* Lock the module so we can safely get the v4l2_subdev pointer */ + if (!try_module_get(client->driver->driver.owner)) + goto error; + sd = i2c_get_clientdata(client); + + /* Register with the v4l2_device which increases the module's + use count as well. */ + if (v4l2_device_register_subdev(v4l2_dev, sd)) + sd = NULL; + /* Decrease the module use count to match the first try_module_get. */ + module_put(client->driver->driver.owner); + + if (sd) { + /* We return errors from v4l2_subdev_call only if we have the + callback as the .s_config is not mandatory */ + int err = v4l2_subdev_call(sd, core, s_config, + info->irq, info->platform_data); + + if (err && err != -ENOIOCTLCMD) { + v4l2_device_unregister_subdev(sd); + sd = NULL; + } + } + +error: + /* If we have a client but no subdev, then something went wrong and + we must unregister the client. */ + if (client && sd == NULL) + i2c_unregister_device(client); + return sd; +} +EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_board); + +struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, + const char *module_name, const char *client_type, + int irq, void *platform_data, + u8 addr, const unsigned short *probe_addrs) +{ + struct i2c_board_info info; + + /* Setup the i2c board info with the device type and + the device address. */ + memset(&info, 0, sizeof(info)); + strlcpy(info.type, client_type, sizeof(info.type)); + info.addr = addr; + info.irq = irq; + info.platform_data = platform_data; + + return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, module_name, + &info, probe_addrs); +} +EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_cfg); +#else +struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, + const char *module_name, const char *client_type, + int irq, void *platform_data, + u8 addr, const unsigned short *probe_addrs) +{ + struct v4l2_subdev *sd = NULL; + struct i2c_client *client; + + BUG_ON(!v4l2_dev); + + if (module_name) + request_module(module_name); + + if (addr == 0 && probe_addrs) { + /* Legacy code: loading the module should automatically + probe and create the i2c_client on the adapter. + Try to find the client by walking the adapter's client list + for each of the possible addresses. */ + while (!client && *probe_addrs != I2C_CLIENT_END) + client = v4l2_i2c_legacy_find_client(adapter, *probe_addrs++); + } else { + /* Legacy code: loading the module automatically probes and + creates the i2c_client on the adapter. Try to find the + client by walking the adapter's client list. */ + client = v4l2_i2c_legacy_find_client(adapter, addr); + } + if (client == NULL || client->driver == NULL) + goto error; + + /* Lock the module so we can safely get the v4l2_subdev pointer */ + if (!try_module_get(client->driver->driver.owner)) + goto error; + sd = i2c_get_clientdata(client); + + /* Register with the v4l2_device which increases the module's + use count as well. */ + if (v4l2_device_register_subdev(v4l2_dev, sd)) + sd = NULL; + /* Decrease the module use count to match the first try_module_get. */ + module_put(client->driver->driver.owner); + + if (sd) { + /* We return errors from v4l2_subdev_call only if we have the + callback as the .s_config is not mandatory */ + int err = v4l2_subdev_call(sd, core, s_config, + irq, platform_data); + + if (err && err != -ENOIOCTLCMD) { + v4l2_device_unregister_subdev(sd); + sd = NULL; + } + } + +error: + return sd; +} +EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_cfg); +#endif + /* Return i2c client address of v4l2_subdev. */ unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd) { diff --git a/linux/drivers/media/video/v4l2-device.c b/linux/drivers/media/video/v4l2-device.c index 4fa93189d..655d19cd6 100644 --- a/linux/drivers/media/video/v4l2-device.c +++ b/linux/drivers/media/video/v4l2-device.c @@ -86,8 +86,8 @@ void v4l2_device_unregister(struct v4l2_device *v4l2_dev) /* Unregister subdevs */ list_for_each_entry_safe(sd, next, &v4l2_dev->subdevs, list) { v4l2_device_unregister_subdev(sd); -#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE)) -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 29) +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26) if (sd->flags & V4L2_SUBDEV_FL_IS_I2C) { struct i2c_client *client = v4l2_get_subdevdata(sd); diff --git a/linux/drivers/media/video/v4l2-ioctl.c b/linux/drivers/media/video/v4l2-ioctl.c index 22b380dfd..625fe7698 100644 --- a/linux/drivers/media/video/v4l2-ioctl.c +++ b/linux/drivers/media/video/v4l2-ioctl.c @@ -1718,24 +1718,29 @@ static long __video_do_ioctl(struct file *file, ret = ops->vidioc_enum_framesizes(file, fh, p); dbgarg(cmd, - "index=%d, pixelformat=%d, type=%d ", - p->index, p->pixel_format, p->type); + "index=%d, pixelformat=%c%c%c%c, type=%d ", + p->index, + (p->pixel_format & 0xff), + (p->pixel_format >> 8) & 0xff, + (p->pixel_format >> 16) & 0xff, + (p->pixel_format >> 24) & 0xff, + p->type); switch (p->type) { case V4L2_FRMSIZE_TYPE_DISCRETE: - dbgarg2("width = %d, height=%d\n", + printk("width = %d, height=%d\n", p->discrete.width, p->discrete.height); break; case V4L2_FRMSIZE_TYPE_STEPWISE: - dbgarg2("min %dx%d, max %dx%d, step %dx%d\n", + printk("min %dx%d, max %dx%d, step %dx%d\n", p->stepwise.min_width, p->stepwise.min_height, p->stepwise.step_width, p->stepwise.step_height, p->stepwise.max_width, p->stepwise.max_height); break; case V4L2_FRMSIZE_TYPE_CONTINUOUS: - dbgarg2("continuous\n"); + printk("continuous\n"); break; default: - dbgarg2("- Unknown type!\n"); + printk("- Unknown type!\n"); } break; diff --git a/linux/drivers/media/video/vivi.c b/linux/drivers/media/video/vivi.c index fe39b7326..afd8e2a5a 100644 --- a/linux/drivers/media/video/vivi.c +++ b/linux/drivers/media/video/vivi.c @@ -346,6 +346,53 @@ static struct bar_std bars[] = { #define TO_U(r, g, b) \ (((-9714 * r - 19070 * g + 28784 * b + 32768) >> 16) + 128) +/* precalculate color bar values to speed up rendering */ +static void precalculate_bars(struct vivi_fh *fh) +{ + struct vivi_dev *dev = fh->dev; + unsigned char r, g, b; + int k, is_yuv; + + fh->input = dev->input; + + for (k = 0; k < 8; k++) { + r = bars[fh->input].bar[k][0]; + g = bars[fh->input].bar[k][1]; + b = bars[fh->input].bar[k][2]; + is_yuv = 0; + + switch (fh->fmt->fourcc) { + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + is_yuv = 1; + break; + case V4L2_PIX_FMT_RGB565: + case V4L2_PIX_FMT_RGB565X: + r >>= 3; + g >>= 2; + b >>= 3; + break; + case V4L2_PIX_FMT_RGB555: + case V4L2_PIX_FMT_RGB555X: + r >>= 3; + g >>= 3; + b >>= 3; + break; + } + + if (is_yuv) { + fh->bars[k][0] = TO_Y(r, g, b); /* Luma */ + fh->bars[k][1] = TO_U(r, g, b); /* Cb */ + fh->bars[k][2] = TO_V(r, g, b); /* Cr */ + } else { + fh->bars[k][0] = r; + fh->bars[k][1] = g; + fh->bars[k][2] = b; + } + } + +} + #define TSTAMP_MIN_Y 24 #define TSTAMP_MAX_Y (TSTAMP_MIN_Y + 15) #define TSTAMP_INPUT_X 10 @@ -758,6 +805,8 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, buf->vb.height = fh->height; buf->vb.field = field; + precalculate_bars(fh); + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { rc = videobuf_iolock(vq, &buf->vb, NULL); if (rc < 0) @@ -896,53 +945,6 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, return 0; } -/* precalculate color bar values to speed up rendering */ -static void precalculate_bars(struct vivi_fh *fh) -{ - struct vivi_dev *dev = fh->dev; - unsigned char r, g, b; - int k, is_yuv; - - fh->input = dev->input; - - for (k = 0; k < 8; k++) { - r = bars[fh->input].bar[k][0]; - g = bars[fh->input].bar[k][1]; - b = bars[fh->input].bar[k][2]; - is_yuv = 0; - - switch (fh->fmt->fourcc) { - case V4L2_PIX_FMT_YUYV: - case V4L2_PIX_FMT_UYVY: - is_yuv = 1; - break; - case V4L2_PIX_FMT_RGB565: - case V4L2_PIX_FMT_RGB565X: - r >>= 3; - g >>= 2; - b >>= 3; - break; - case V4L2_PIX_FMT_RGB555: - case V4L2_PIX_FMT_RGB555X: - r >>= 3; - g >>= 3; - b >>= 3; - break; - } - - if (is_yuv) { - fh->bars[k][0] = TO_Y(r, g, b); /* Luma */ - fh->bars[k][1] = TO_U(r, g, b); /* Cb */ - fh->bars[k][2] = TO_V(r, g, b); /* Cr */ - } else { - fh->bars[k][0] = r; - fh->bars[k][1] = g; - fh->bars[k][2] = b; - } - } - -} - /*FIXME: This seems to be generic enough to be at videodev2 */ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) @@ -968,8 +970,6 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, fh->vb_vidq.field = f->fmt.pix.field; fh->type = f->type; - precalculate_bars(fh); - ret = 0; out: mutex_unlock(&q->vb_lock); @@ -1360,6 +1360,7 @@ static int __init vivi_create_instance(int inst) goto unreg_dev; *vfd = vivi_template; + vfd->debug = debug; ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); if (ret < 0) diff --git a/linux/include/media/ir-common.h b/linux/include/media/ir-common.h index 7b5b91f60..9dcb632f6 100644 --- a/linux/include/media/ir-common.h +++ b/linux/include/media/ir-common.h @@ -162,6 +162,8 @@ extern IR_KEYTAB_TYPE ir_codes_ati_tv_wonder_hd_600[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_kworld_plus_tv_analog[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_kaiomy[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_dm1105_nec[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_evga_indtube[IR_KEYTAB_SIZE]; + #endif /* diff --git a/linux/include/media/v4l2-chip-ident.h b/linux/include/media/v4l2-chip-ident.h index 4d7e2272c..11a4a2d3e 100644 --- a/linux/include/media/v4l2-chip-ident.h +++ b/linux/include/media/v4l2-chip-ident.h @@ -155,6 +155,9 @@ enum { /* module cafe_ccic, just ident 8801 */ V4L2_IDENT_CAFE = 8801, + /* module mt9v011, just ident 8243 */ + V4L2_IDENT_MT9V011 = 8243, + /* module tw9910: just ident 9910 */ V4L2_IDENT_TW9910 = 9910, diff --git a/linux/include/media/v4l2-common.h b/linux/include/media/v4l2-common.h index 54728d4c0..831c4c038 100644 --- a/linux/include/media/v4l2-common.h +++ b/linux/include/media/v4l2-common.h @@ -158,6 +158,24 @@ struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct v4l2_device *v4l2_dev, struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev, struct i2c_adapter *adapter, const char *module_name, const char *client_type, u8 addr); + +/* Load an i2c module and return an initialized v4l2_subdev struct. + Only call request_module if module_name != NULL. + The client_type argument is the name of the chip that's on the adapter. */ +struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, + const char *module_name, const char *client_type, + int irq, void *platform_data, + u8 addr, const unsigned short *probe_addrs); + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26) +struct i2c_board_info; + +struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, const char *module_name, + struct i2c_board_info *info, const unsigned short *probe_addrs); +#endif + /* Initialize an v4l2_subdev with data from an i2c_client struct */ void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client, const struct v4l2_subdev_ops *ops); diff --git a/linux/include/media/v4l2-i2c-drv.h b/linux/include/media/v4l2-i2c-drv.h index 121f0ada0..f5e4ffe27 100644 --- a/linux/include/media/v4l2-i2c-drv.h +++ b/linux/include/media/v4l2-i2c-drv.h @@ -22,7 +22,7 @@ */ /* NOTE: the full version of this header is in the v4l-dvb repository - * and allows v4l i2c drivers to be compiled on older kernels as well. + * and allows v4l i2c drivers to be compiled on pre-2.6.26 kernels. * The version of this header as it appears in the kernel is a stripped * version (without all the backwards compatibility stuff) and so it * looks a bit odd. @@ -30,6 +30,9 @@ * If you look at the full version then you will understand the reason * for introducing this header since you really don't want to have all * the tricky backwards compatibility code in each and every i2c driver. + * + * If the i2c driver will never be compiled for pre-2.6.26 kernels, then + * DO NOT USE this header! Just write it as a regular i2c driver. */ #ifndef __V4L2_I2C_DRV_H__ diff --git a/linux/include/media/v4l2-subdev.h b/linux/include/media/v4l2-subdev.h index a503e1cee..5dcb36785 100644 --- a/linux/include/media/v4l2-subdev.h +++ b/linux/include/media/v4l2-subdev.h @@ -79,7 +79,11 @@ struct v4l2_decode_vbi_line { not yet implemented) since ops provide proper type-checking. */ -/* init: initialize the sensor registors to some sort of reasonable default +/* s_config: if set, then it is always called by the v4l2_i2c_new_subdev* + functions after the v4l2_subdev was registered. It is used to pass + platform data to the subdev which can be used during initialization. + + init: initialize the sensor registors to some sort of reasonable default values. Do not use for new drivers and should be removed in existing drivers. @@ -96,6 +100,7 @@ struct v4l2_decode_vbi_line { struct v4l2_subdev_core_ops { int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip); int (*log_status)(struct v4l2_subdev *sd); + int (*s_config)(struct v4l2_subdev *sd, int irq, void *platform_data); int (*init)(struct v4l2_subdev *sd, u32 val); int (*load_fw)(struct v4l2_subdev *sd); int (*reset)(struct v4l2_subdev *sd, u32 val); |