summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-02-13Merging rmcc tree.Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-13Pinnacle PCTV 40i: add filtered Composite2 input for Composite signals on ↵Michael Krufky
S-Video From: Karsten Suehring <ksuehring@gmx.net> This patch adds another composite input to the Pinnacle PCTV 100i definition which filters the chrominace signal from the luma input. This improves video quality for Composite signals on the S-Video connector of the card. In addition the name string of the card is changed to include PCTV 40i and 50i since these cards are identical. Signed-off-by: Karsten Suehring <ksuehring@gmx.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-13Add saa713x card: ELSA EX-VISION 700TV (saa7130)Michael Krufky
From: Tamuki Shoichi <tamuki@linet.gr.jp> Add support for ELSA EX-VISION 700TV, which is the ELSA Japan's flagship model of the software encoding TV capture card. All inputs (Television, Composite1 and S-Video) have been tested. Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-12The hg push repo can be defined in the envRicardo Cerqueira
From: Ricardo Cerqueira <v4l@cerqueira.org> If I want to push a changeset to my own repo with "make push", I just have to define the $REPO_PUSH env var. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
2006-02-12remote control codes for BTTV_BOARD_CONTVFMIRicardo Cerqueira
From: BoyZonder <boyzonder@spymac.com> The remote control interface for this board is the same as the one for BTTV_BOARD_CONCEPTRONIC_CTVFMI2 Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
2006-02-12move CONFIG_DVB_FIRESAT to the right placeMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - move CONFIG_DVB_FIRESAT to the right place in Make.config - this is still in v4l_experimental Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-12Fixed saa7134 ALSA initialization with multiple cardsRicardo Cerqueira
From: Ricardo Cerqueira <v4l@cerqueira.org> When multiple cards were installed, only the first card would have audio initialized, because only the first position in the array parameter defaulted to "1" To make things worse, the "enable" parameter wasn't enabled, so there was no workaround. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
2006-02-11KWorld HardwareMpegTV XPert must set gpio2Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - KWorld HardwareMpegTV XPert must set gpio2 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-11KWorld HardwareMpegTV XPert: Add radio supportMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - add radio support for KWorld HardwareMpegTV XPert - fix GPIO settings for tv and radio Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-11Merging manu treeMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-11Merging mkrufky treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-11From: Mauro Carvalho Chehab <mchehab@infradead.org>Mauro Carvalho Chehab
Solving conflicts at the tree Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-10upstream sync - make 2 structs staticManu Abraham
From: Adrian Bunk <bunk@stusta.de> Signed-off-by: Adrian Bunk <bunk@stusta.de> Ack'd-by: Manu Abraham <manu@linuxtv.org>
2006-02-09at76c651: don't do generic __ilog2 on mipsMichael Krufky
From: Alexey Dobriyan <adobriyan@gmail.com> dvb/frontends/at76c651.c: redefinition of __ilog2 blah blah (akpm: I nuked __ilog2 and used the standard long_log2() instead) We've already removed this module from the kernel, but it is still in the v4l-dvb tree, best to keep it up-to-date. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-09drivers/media/dvb/frontends/mt312.c: cleanupsMichael Krufky
From: Adrian Bunk <bunk@stusta.de> This patch contains the following possible cleanups: - update the Kconfig help to mention the VP310 - merge vp310_attach and mt312_attach into a new vp310_mt312_attach to remove some code duplication Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-09bt8xx documentation authors fixMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - use one Author per line, which allows us to add more authors later without creating a mess. - Add Michael Krufky, responsible for the following changes: http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2cbeddc976645262dbe036d6ec0825f96af70da3 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-09fix in-kernel buildMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - remove tuner.ko build dependency on xc3028.o , which will be added again later. - fix the following build error when using the "make kernel-links" build method to symlink the latest code from the v4l-dvb repository into the kernel source: drivers/media/video/xc3028.c:31:20: em28xx.h: No such file or directory drivers/media/video/xc3028.c: In function `xc3028_init': drivers/media/video/xc3028.c:120: error: dereferencing pointer to incomplete type drivers/media/video/xc3028.c:121: error: dereferencing pointer to incomplete type drivers/media/video/xc3028.c:139: error: dereferencing pointer to incomplete type drivers/media/video/xc3028.c:140: error: dereferencing pointer to incomplete type make[3]: *** [drivers/media/video/xc3028.o] Error 1 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-08Fixed a bug at makefileMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-08XC3028 code marked with an special define optionMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> - Current xc3028 support is still experimental, requiring more work to be sent to mainstream. So, it was marked inside some defines, in order to be removed by gentree.pl stript. Script also updated to remove it. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-09make a struct staticManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org
2006-02-08Merged patch 3310 at tipMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-08merged patch 3289 at tip.Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> ------------
2006-02-08merged patch at master tree.Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> ------------
2006-02-08added support for new terratec firmware to fw extractorMarkus Rechberger
From: Markus Rechberger <mrechberger@gmail.com> added support for new terratec firmware to fw extractor Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
2006-02-07Kernel Sync stuffMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Added a new format at videodev2.h Added support for a new board at snd-bt87x module kernel-sync Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-07Adding support for Terratec Prodigy XSMarkus Rechberger
From: Markus Rechberger <mrechberger@gmail.com> Adding support for Terratec Prodigy XS Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
2006-02-07disabled debug on by default in tvp5150Markus Rechberger
From: Markus Rechberger <mrechberger@gmail.com> disabled debug on by default in tvp5150 Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
2006-02-06Fix Samsung tuner frequency rangesHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Forgot to take the NTSC frequency offset into account. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-02-06sem2mutex: fix local build and backwards-compatabilityMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Patch 3320 breaks our repository. This should fix it. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-06From: Adrian Bunk <bunk@stusta.de>Mauro Carvalho Chehab
DVB: remove the at76c651/tda80xx frontends The at76c651 and tda80xx frontends are currently completely unused, IOW their only effect is making the kernel larger for people accitentially enabling them. The current in-kernel drivers differ from the drivers at cvs.tuxbox.org, and re-adding them when parts of the dbox2 project get merged should be trivial. Note: on hg, removed only entries at Kconfig and Makefile. Files will stay at hg repository, if later needed. kernel-sync: kernel patch 3318e Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-06implemented compat.h for mutex_trylock()Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Fixed also a small mistake at including mutex.h kernel-sync Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-06sem2mutex: drivers/media/, #2Mauro Carvalho Chehab
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Kernel-sync from patch 3318b Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-06Included hg ignore fileMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> All .c files at v4l dir, object files, and temporary ones will be ignored by hg. Now, hg status will work properly. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-06Make usage of module_param() macroMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync MODULE_PARM is an obsoleted macro. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-06Sync patches to kernelMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> dvb_bt8xx_remove return code changed to zero to avoid warning tvp5150_read doesn't need to be inline Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-05Add initial support for KWorld HardwareMpegTV XPertMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - Add initial support for KWorld HardwareMpegTV XPert. - uses silicon tuner: tda8290 + tda8275 - standard video using cx88 broadcast decoder is working. - blackbird mpeg encoder support (cx23416) not yet working. - FM radio untested. - audio is only working correctly in television mode, all other modes disabled. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-06Added support for the Tevion DVB-T 220RF cardHartmut Hackmann
From: Peter Hartshorn <p3r@users.sourceforge.net> This is a analog / digital hybrid card Signed-off-by: Peter Hartshorn <p3r@users.sourceforge.net> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-02-05Fixed em28xx based system lockup Markus Rechberger
From: Markus Rechberger <mrechberger@gmail.com> fixed em28xx based system lockup, device needs to be initialized before starting the isoc transfer otherwise the system will completly lock up. Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
2006-02-05FIX: Check if FW was downloaded or not + new firmware filePatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> When a firmware was downloaded dvb_usb_device_init returns NULL for the dvb_usb_device, then nothing should be done with that pointer and device, because it will re-enumerate. A new firmware should be used with digitv devices. It should make "slave"-devices work and others, too. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-02-05FIX: Multiple usage of VP7045-based devicesPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Reassigning function pointers in a static led to infinite loops when using multiple VP7045-based device at the same time on one system. Using kmalloc'd copies for reassignments is better. bug-fix Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-02-05Use MT352 parallel transport for Bluebird FusionHDTV DVB-T boxes (TH7579 & ↵Michael Krufky
LGZ201) From: Michael Krufky <mkrufky@linuxtv.org> Use the parallel transport function of the MT352 demodulator in TH7579 and LGZ201 -based FusionHDTV Bluebird usb boxes. bug-fix Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-05Use MT352 parallel transport function for all Bluebird FusionHDTV DVB-T boxes.Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Use the parallel transport function of the MT352 demodulator in TH7579 and LGZ201 -based FusionHDTV Bluebird usb boxes. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-04fixed compiling the firmware into the av7110 driverOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Fixed compiling av7110 firmware into the driver. It did not work unless you specified the firmware path in the kernel configuration (make menuconfig etc). Now it is sufficient to uncomment two lines in Make.config... Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2006-02-04Use parallel transport function of MT352 for FusionHDTV Dual Digital USBMichael Krufky
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> Use the parallel transport function of the MT352 in USB demodulator of the Dual Digital board. bug-fix Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-03support for Galaxis DVB-S rev1.3Oliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> support for Galaxis DVB-S rev1.3 (subsystem 13c2:0004) Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2006-02-03fixed i2c return value, conversion mdelay to msleepMarkus Rechberger
From: Markus Rechberger <mrechberger@gmail.com> fixed i2c return value, conversion mdelay to msleep Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
2006-02-03Added support for the ADS Instant TV DUO Cardbus PTV331Hartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> Analog and DVB-T are working, Remote not yet. This card is based on the new LifeView design, there should be many variants. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-02-03TDA10046 Driver updateHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> - Set outputs to tristate in sleep mode - Reduce dangerously high firmware download speed with 16MHz xtal - added tda827x configuration with GPIOs low - added comments to stupid looking IIC reads that work around bugs in the tda10046. - some minor updates Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-02-03TDA8290 updateHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> This patch - works around a bug in the I2C bridge that makes the initialization of the TDA10046 fail on recent LifeView cards - puts the AGC output to tristate in sleep mode. This is necessary for recent hybrid cards that switch the AGC via tristateing. Signed-off-by: Hartmut Hackmann<hartmut.hackmann@t-online.de>
2006-02-03Added support for the LifeView FlyDVB-T LR301 cardHartmut Hackmann
From: Giampiero Giancipoli <gianci@libero.it> Additionally to the card support, this changeset adds the option tda10046lifeview to get_dvb_firmware to download tda10046 firmware from LifeView's site. Signed-off-by: Giampiero Giancipoli <gianci@libero.it> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-09 09:42:21 +0000