summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-03-31pxa_camera: Enforce YUV422P frame sizes to be 16 multiplesGuennadi Liakhovetski
From: Robert Jarzmik <robert.jarzmik@free.fr> Due to DMA constraints, the DMA chain always transfers bytes from the QCI fifos to memory in 8 bytes units. In planar formats, that could mean 0 padding between Y and U plane (and between U and V plane), which is against YUV422P standard. Therefore, a frame size is required to be a multiple of 16 (so U plane size is a multiple of 8). It is enforced in try_fmt() and set_fmt() primitives, be aligning height then width on 4 multiples as need be, to reach a 16 multiple. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/pxa_camera.c | 32 +++++++++++++++++++++----------- 1 files changed, 21 insertions(+), 11 deletions(-)
2009-03-30fix misspelling of kconfig optionMauro Carvalho Chehab
From: Kyle McMartin <kyle@mcmartin.ca> CUSTOMISE appears to be the one actually defined... Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30af9015: remove wrong definitionsAntti Palosaari
From: Antti Palosaari <crope@iki.fi> Remove wrong GPIO definitions. GPIOs used by AF9015 are property of the AF9013 demodulator and are coming from there. Priority: normal Signed-off-by: Antti Palosaari <crope@iki.fi>
2009-03-30patch: s2255drv driver removal problem fixedMauro Carvalho Chehab
From: Dean Anderson <dean@sensoray.com> This patch fixes kfree problem on driver removal, fixes streamoff problem and removes unnecessary videobuf_waiton from free_buffer function. Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30msp3400: use the V4L2 header since no V4L1 code is thereMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30cx88: Fix compilation breakage for kernels older than 2.6.22Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30saa7191: tuner ops wasn't set.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The tuner ops pointer wasn't set, so s_std never worked here. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-30cx25840: fix 'unused variable' warning.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-30au8522: remove unused I2C_DRIVERIDHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> I2C_DRIVERIDs are no longer needed with v4l2_subdev and will be removed from the kernel soon. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> CC: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-29merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-cx88Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-29merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-cx23885Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-29merge: http://linuxtv.org/hg/~pinchartl/uvcvideo/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-29merge: http://linuxtv.org/hg/~pb/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-29pci-isa radios: remove open and release functionsMauro Carvalho Chehab
From: Alexey Klimov <klimov.linux@gmail.com> Patch removes empty open and release functions in pci and isa radio drivers, setting them to NULL. V4L module doesn't call for them due to previous patch. Priority: normal Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-292-dev.c: return 0 for NULL open and release callbacksMauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Patch allows v4l2_open and v4l2_release functions return 0 if open and release driver callbacks set to NULL. This will be used in radio drivers. -- Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-29Document the orientation flags in ENUMINPUTMauro Carvalho Chehab
From: Adam Baker <linux@baker-net.org.uk> Add documentation for the flags that have been added to VIDIOC_ENUMINPUT to specify the sensor orientation. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30v4l2-subdev: add enum_framesizes and enum_frameintervals.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> These callbacks are needed for omap. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-30tuner: remove V4L1 code from this driver.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> No i2c modules are called with the V4L1 API anymore, so this can be removed. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-30v4l: replace 'ioctl' references in v4l i2c driversHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Replace 'VIDIOC_' references in v4l i2c drivers by their new v4l2_subdev callback names. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-30cx18: remove intermediate 'ioctl' stepHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The audio and vbi parts still used an 'ioctl'-like interface. Replace this with normal functions. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> CC: Andy Walls <awalls@radix.net>
2009-03-30cx25840: cleanup: remove intermediate 'ioctl' stepHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The audio and vbi functions where still called through an ioctl-like interface, even though this is no longer needed with v4l2-subdev. Just change each 'case' into a proper function and call that directly. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-29Specify SHELL in documentation MakefileMauro Carvalho Chehab
From: Adam Baker <linux@baker-net.org.uk> The Makefile for the V4L2 spec uses bash extensions but was using the default system shell, change it to explicitly request bash. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-29Sensor orientation reportingMauro Carvalho Chehab
From: Adam Baker <linux@baker-net.org.uk> Add support to the SQ-905 driver to pass back to user space the sensor orientation information obtained from the camera during init. Modifies gspca and the videodev2.h header to create the necessary API. Signed-off-by: Adam Baker <linux@baker-net.org.uk> [mchehab@redhat.com: Changed "Output is" to "Frames are" at the comments, as suggested at LMML] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-29cx88: prevent probing rtc and ir devicesHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> tuner-core.c contains a hack for cx88 board to prevent probing of certain addresses: /* HACK: Ignore 0x6b and 0x6f on cx88 boards. * FusionHDTV5 RT Gold has an ir receiver at 0x6b * and an RTC at 0x6f which can get corrupted if probed. */ With the new i2c API this hack no longer works. So instead change the list of tuner probe addresses in the cx88 driver itself, which is much more clean. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-29saa7134: Add analog RF tuner support for Avermedia A700 DVB-S Hybrid+FM cardMauro Carvalho Chehab
From: Matthias Schwarzott <zzam@gentoo.org> Thanks to panagonov <panagonov@mail.bg> for requesting support and testing patches. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-05merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-05em28xx: use usb_interface.dev for v4l2_device_registerMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-05merge: http://hg.jannau.net/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-03Add camera (CSI) driver for MX1Guennadi Liakhovetski
From: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Add support for CMOS Sensor Interface on i.MX1 and i.MXL SoCs. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- arch/arm/mach-mx1/Makefile | 5 +- arch/arm/mach-mx1/devices.c | 2 +- arch/arm/mach-mx1/ksym_mx1.c | 18 + arch/arm/mach-mx1/mx1_camera_fiq.S | 35 ++ arch/arm/plat-mxc/include/mach/memory.h | 8 + arch/arm/plat-mxc/include/mach/mx1_camera.h | 35 ++ drivers/media/video/Kconfig | 13 +- drivers/media/video/Makefile | 1 + drivers/media/video/mx1_camera.c | 827 +++++++++++++++++++++++++++ 9 files changed, 941 insertions(+), 3 deletions(-) create mode 100644 arch/arm/mach-mx1/ksym_mx1.c create mode 100644 arch/arm/mach-mx1/mx1_camera_fiq.S create mode 100644 arch/arm/plat-mxc/include/mach/mx1_camera.h create mode 100644 drivers/media/video/mx1_camera.c
2009-04-03mx3-camera: adapt the clock definition and the driver to the new clock namingGuennadi Liakhovetski
From: Guennadi Liakhovetski <lg@denx.de> With the i.MX31 transition to clkdev clock names have changed, but mistakenly the "mx3-camera.0" has been registered with a non-NULL connection ID, which is not necessary, since this is the only clock, used by the capture interface driver. Fix the clock definition and the driver to use NULL as a connection ID. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/mach-mx3/clock.c | 2 +- drivers/media/video/mx3_camera.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
2009-04-03sync: add files needed for the following two commitsGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> kernel-sync:
2009-04-03mt9t031: use platform power hookGuennadi Liakhovetski
From: Guennadi Liakhovetski <lg@denx.de> Use platform power hook to turn the camera on and off. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> --- drivers/media/video/mt9t031.c | 21 +++++++++++++++++++++ 1 files changed, 21 insertions(+), 0 deletions(-)
2009-04-03v4l2-spec: add missing doc for V4L2_PIX_FMT_SQ905CHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-04-02v4l2-i2c-drv.h: fix compilation on kernel 2.6.25.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-04-02saa7146: fix incorrect comment.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-04-02ivtv/cx18: remove VIDIOC_INT_S_AUDIO_ROUTING debug support.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Remove support for the debug call VIDIOC_INT_S_AUDIO_ROUTING from cx18 and ivtv. These internal ioctls shouldn't be exposed. These were only used through the cx18-ctl and ivtv-ctl utilities, and only when testing a new card variant. This cleanup allows the removal of this ioctl from v4l2-common.h. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> CC: Andy Walls <awalls@radix.net>
2009-04-02v4l2-subdev: change s_routing prototypeHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> It is no longer needed to use a struct pointer as argument, since v4l2_subdev doesn't require that ioctl-like approach anymore. Instead just pass the input, output and config (new!) arguments directly. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-04-02mxb: fix copy-and-paste bug in mute.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The line-in was muted twice instead of the line-in and the cd-in. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-04-01w9968cf: use usb_interface.dev for v4l2_device_registerJanne Grunau
From: Janne Grunau <j@jannau.net> Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-04-01au0828: remove explicitly set v4l2_device.name and unused au0828_instanceJanne Grunau
From: Janne Grunau <j@jannau.net> Priority: normal Signed-off-by: Janne Grunau <j@jannau.net> Acked-by: Devin Heitmueller <devin.heitmueller@gmail.com>
2009-04-01au0828: use usb_interface.dev for v4l2_device_registerJanne Grunau
From: Janne Grunau <j@jannau.net> Priority: normal Signed-off-by: Janne Grunau <j@jannau.net> Acked-by: Devin Heitmueller <devin.heitmueller@gmail.com>
2009-04-01pvrusb2: use usb_interface.dev for v4l2_device_registerJanne Grunau
From: Janne Grunau <j@jannau.net> Priority: normal Signed-off-by: Janne Grunau <j@jannau.net> Acked-by: Mike Isely <isely@pobox.com>
2009-04-01usbvision: use usb_interface.dev for v4l2_device_registerJanne Grunau
From: Janne Grunau <j@jannau.net> Priority: normal Signed-off-by: Janne Grunau <j@jannau.net> Acked-by: Thierry Merle <thierry.merle@free.fr>
2009-04-01cx231xx: remove explicitly set v4l2_device.nameJanne Grunau
From: Janne Grunau <j@jannau.net> Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-04-01cx231xx: use usb_interface.dev for v4l2_device_registerJanne Grunau
From: Janne Grunau <j@jannau.net> Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-04-01v4l: use usb_interface for v4l2_device_registerJanne Grunau
From: Janne Grunau <j@jannau.net> If usb_interface.dev is used as dev parameter for v4l2_device_register v4l2_dev.name contains the v4l driver/module name and usb device and interface instead of a simple "usb x-y". It also matches the recommendation to set the parent devices for usb drivers. Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-04-01v4l2-subdev: change prototype of s_crystal_freq.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Remove intermediate v4l2_crystal_freq struct. This is no longer needed with the v4l2_subdev API. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-04-01v4l: increase version numbers of drivers converted to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> With all the v4l2_subdev changes that were made to these drivers it is a good idea to increase the version number of each driver. It's just the patch level that is increased, except for the zoran and saa7146 drivers where the minor number was increased due to the more substantial changes that were made to those two drivers. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-04-01tvaudio.h: add static inline to retrieve the list of possible i2c addrs.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Rather than duplicating this list everywhere, just put it in tvaudio.h. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-11 13:15:07 +0000