| Age | Commit message (Collapse) | Author |
|---|
|
From: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Building were not broken, since the building system were using the kernel's
video-buf-dvb.h.
This changeset will be merged with cs 6257 at -git.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Maxim Levitsky <maximlevitsky@gmail.com>
/lib/modules/$(uname -r)/source isn't available if only kernel-headers
were installed. use /lib/modules/$(uname -r)/build in that case
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Jiri Slaby <jirislaby@gmail.com>
zc0301, remove bad usage of ERESTARTSYS
down_read_trylock can't be interrupted and so ERESTARTSYS would reach
userspace, which is not permitted. Change it to EAGAIN
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Jiri Slaby <jirislaby@gmail.com>
w9968cf, remove bad usage of ERESTARTSYS
down_read_trylock can't be interrupted and so ERESTARTSYS would reach
userspace, which is not permitted. Change it to EAGAIN
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Maxim Levitsky <maximlevitsky@gmail.com>
*Disable DMA explictly on suspend
*Enable DMA on resume, after all buffers were configured
*Disable overlay on resume - apps should enable it when X is resumed
`
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Brandon Philips <bphilips@suse.de>
The return value of videobuf_alloc() is unchecked but this function will
return NULL on an error. Check for NULL and make videobuf_reqbufs()
return the number of successfully allocated buffers.
Also, fix saa7146_video.c and bttv-driver.c to use this returned
buffer count.
Tested against the vivi driver. Not tested against saa7146 or bt8xx
devices.
Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
checkpatch.pl is the official tool for checking CodingStyle violations on kernel
patches. This changeset makes it run every time a "make commit" is called. This
allows detecting CodingStyle violations during development phase.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
The prototypes for the show and store methods of a device_attribute changed in
kernel 2.6.13, but the code in pvrusb2 was never updated. I guess the
DEBUGIFC stuff isn't used much....
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
Both true and false branch of the #if had the exact same code, just line
wrapped differently.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
It needs to select VIDEOBUF_GEN and VIDEOBUF_DMA_SG, since it uses those
modules.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
fix bad Kconfig dependency of cx23885 module.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Joachim Steiger <roh@hyte.de>
add Avermedia dvb-t express card 34 (usb2) id
Signed-off-by: Joachim Steiger <roh@hyte.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Kay Sievers <kay.sievers@vrfy.org>
The currently used "struct class_device" will be removed from the
kernel. Here is a patch that converts all users in drivers/media/video/
to struct device.
Reviewed-by: Thierry Merle <thierry.merle@free.fr>
Reviewed-by: Mike Isely <isely@pobox.com>
Reviewed-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
|
|
From: Eric Sandeen <sandeen@sandeen.net>
Recognize the KWorld ATSC115 PCI ID as a hardware clone of the ATSC110.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
In the past, videobuf_queue_init were used to initialize PCI DMA videobuffers.
This patch renames it, to avoid confusion with the previous kernel API, doing:
s/videobuf_queue_init/void videobuf_queue_core_init/
Also, the operations is now part of the function parameter. The function will
also add a test if this is defined, otherwise producing BUG.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
This workaround fix a bug that happens on some SMP machines. On those machines,
videobuf_iolock is called too soon, before file .mmap handler. This patch calls
the scheduler before iolocking, allowing it to properly call the pending mmap.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Before the videobuf redesign, a procedure for re-using videobuf without PCI
scatter/gather where provided by changing the pci-dependent operations by
other operations.
With the newer approach, those methods are obsolete and can safelly be removed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: "Robert P. J. Day" <rpjday@mindspring.com>
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
This is already defined on compat.h
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
cx23885 driver were converted to use the newer videobuf support. Unfortunately,
the constructor weren't changed. This causes an oops, since the abstract methods
(implemented as callbacks) aren't defined.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
This is a Lifeview hybrid OEM board.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
When a cx8802 sub-driver was unregistered, the struct cx8802_driver, which was
kmalloc()ed by cx8802_register_driver(), was deleted from the list of drivers,
but never freed.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
Less code and more efficient.
Got ride of a variable that counted the number of devices in
cx8802_unregister_driver() but was never used. Looked leftover from a
cut&paste.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
It was a struct cx8802_driver for no apparent reason. Nothing uses a
cx8802_driver in the cx8802_dev struct. The only field that was used was
devlist, a list_head.
The code in cx8802_remove() that removed any loaded sub-drivers was broken.
It would delete the current list entry, but didn't use list_for_each_safe. It
also called list_del() on the list _head_ inside the list_for_each loop? It
would crash if it was run, which I don't think can ever happen.
Since the cx8802 sub-drivers use the cx8802 driver, they have to be unloaded
first. So there isn't any way for a sub-driver to still be loaded when
cx8802_remove() is called... Except maybe with PCI hot-plug, if one removes
the PCI card while the drivers are loaded?
So I left some code in to handle that if it's actually possible. It will
remove the sub-drivers from the device cx8802_remove() was called on, and only
that device. If one has two DVB cards and unplugs one, there is no reason to
unload the DVB drivers for both cards. I have no way to test this, but it
can't be worse than what was there before.
cx8802_get_driver() is passed a cx8802_dev pointer and looks for the requested
driver on that device. It first loops over the cx8802 device list looking for
the device it was passed, which is pointless. It doesn't need to find the
device pointer in the list, as it already has the pointer.
The list_head in the cx8802_driver struct, which joins all the _drivers_
attached to a device, was named devlist. Changed that to drvlist, since the
devlist is used for a list of _devices_ in other cx8802 structs.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
card_priv was only used to store a pointer to the vp3054 state struct.
There's no need to use a void * since it doesn't have multiple types.
Make the field conditional on VP3045 support. It was already conditional on
DVB support, but it's only used if VP3045 support is on, so that makes for a
better option to check.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
Add some ifdefs around fields only used for blackbird support, similar to the
way the dvb fields are only included with dvb support.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
Recent patches to try to handle kernel object file directories haven't been
doing it correctly. This patch reworks the way the kernel location(s) are
handled.
KDIR et al are removed and replaced with two variables, SRCDIR and OUTDIR.
SRCDIR is the location of:
The main kernel Makefile
The kernel headers
The kernel source (if present)
OUTDIR is the location of:
The kernel .config file
The kernel [qxm]conf binaries (if present)
The following kernel situations should be handled correctly:
1. A kernel installed from source. One can specify the version via "make
release VER=version". If VER is not specified, uname -r is used. This the
default if make is run on a clean tree. OUTDIR is /lib/modules/$(VER)/build
and SRCDIR is /lib/modules/$(VER)/source, which are both symlinks pointing to
the same location.
2. A kernel installed from source which was was built with the
"O=/output/directory" option to the kernel Makefile. The version is specified
the same was as above. OUTDIR and SRCDIR are the same as above, except in
this case they are symlinks to different directories. OUTDIR will be a link
the the directory used in the "O=" option and SRCDIR will be the source
location.
3. An installed binary kernel with only a kernel-headers package. The
version can be specified the same way as above. OUTDIR will be
/lib/modules/$(VER)/build and SRCDIR will be the same as OUTDIR, as no
'source' directory exists. The kernel source and Kconfig program are most
likely not present.
4. An un-installed kernel source tree, for a kernel that was built without
using the "O=/outdir/directory" option. The kernel does not need to be fully
built, only the "modules_prepare" target needs to be built. The location of
the tree is specified with "make release DIR=directory". Both SRCDIR and
OUTDIR will be $(DIR).
5. An un-installed kernel source tree, for a kernel that was built using the
"O=/output/directory" option. The location of the tree is specified using
"make release DIR=/output/directory". Note that DIR is not the directory with
the kernel source! It is set to the directory that was used with the O option
when the kernel was built. The Makefile in this directory has a link back to
the kernel source directory and the v4l-dvb build system will find this.
OUTDIR will be the '/output/directory' and SRCDIR will be the location of the
source that built it.
All all these situation the v4l-dvb tree should build correctly and all the
various scripts will work. In addition, if the binaries for the [qxm]conf
programs are present, "make menuconfig", etc. will work as well. If the
binaries are not present, but the source is, the Makefile will automatically
build the binaries when "make menuconfig", etc. is used. The source should
be present in all situation except (3), a kernel-headers only install.
Note that if the kernel output directory (usually the same as the kernel
source directory, except for (2) and (5)) is not writable, then building the
Kconfig programs automatically will not be possible.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Steven Toth <stoth@hauppauge.com>
Fix i2c reads and writes of 16bit register address / values
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Steven Toth <stoth@hauppauge.com>
Semicolon fix.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Steven Toth <stoth@hauppauge.com>
This patch enables QAM Annex-B support (US digital cable)
for the s5h1409 VSB/QAM demodulator.
Tested successfully with the mt2131 tuner,
present on the following supported boards:
Hauppauge WinTV-HVR-1250
Hauppauge WinTV-HVR-1800
Hauppauge WinTV-HVR-1800lp
This patch is also known to work with an upcoming XC5000 tuner driver.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
The bus-based I2C subsystem allocates the i2c_client struct. So if in order to
be able to convert the tuner to the bus-based I2C API the embedded i2c_client
struct must be removed from the tuner struct and replaced with a pointer.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
linux/drivers/media/video/tda8290.c | 22 ++++++-------
linux/drivers/media/video/tda9887.c | 22 ++++++-------
linux/drivers/media/video/tuner-core.c | 51 ++++++++++++++++++-------------
linux/drivers/media/video/tuner-driver.h | 26 +++++++--------
4 files changed, 65 insertions(+), 56 deletions(-)
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
The next patchset series will change i2c structs inside tuner. This patch
avoids breaking bissect, by commenting the still unused tuner xc2028.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
linux/drivers/media/video/tuner-core.c | 2 ++
1 file changed, 2 insertions(+)
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
TUNER_PHILIPS_TDA8290 will autodetect a TDA8290 or a TDA8295,
so we don't need this separate entry anymore.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
linux/Documentation/video4linux/CARDLIST.tuner | 3 +--
linux/drivers/media/video/tuner-core.c | 1 -
linux/drivers/media/video/tuner-types.c | 5 +----
linux/drivers/media/video/tveeprom.c | 2 +-
linux/include/media/tuner.h | 2 --
5 files changed, 3 insertions(+), 10 deletions(-)
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Consolidate tda8290_attach() and tda8295_attach() into a single function,
tda829x_attach(), which will detect chip combinations tda8290 or tda8295 with
tda8275, tda8275a or tda18271.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
linux/drivers/media/video/tda8290.c | 263 +++++++++++++++------------------
linux/drivers/media/video/tda8290.h | 12 -
linux/drivers/media/video/tuner-core.c | 6
3 files changed, 130 insertions(+), 151 deletions(-)
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
linux/drivers/media/video/v4l2-common.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
The remove driver function expects that the client is still attached
to the driver, so do the detach after calling remove().
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
linux/include/media/v4l2-i2c-drv-legacy.h | 8 +++++---
linux/include/media/v4l2-i2c-drv.h | 8 +++++---
2 files changed, 10 insertions(+), 6 deletions(-)
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
If the chip isn't recognized, then the correct errors should be returned.
The v4l2_i2c_attach() utility function will return 0 for all errors
except -ENOMEM to provide proper compatibility support for the old I2C
probing function.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
linux/drivers/media/video/cs53l32a.c | 2 +-
linux/drivers/media/video/cx25840/cx25840-core.c | 6 +++++-
linux/drivers/media/video/msp3400-driver.c | 4 ++--
linux/drivers/media/video/saa7115.c | 4 ++--
linux/drivers/media/video/saa7127.c | 6 +++---
linux/drivers/media/video/tlv320aic23b.c | 2 +-
linux/drivers/media/video/upd64031a.c | 2 +-
linux/drivers/media/video/upd64083.c | 2 +-
linux/drivers/media/video/v4l2-common.c | 2 +-
linux/drivers/media/video/vp27smpx.c | 2 +-
linux/drivers/media/video/wm8739.c | 4 ++++
11 files changed, 22 insertions(+), 14 deletions(-)
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
linux/drivers/media/video/tlv320aic23b.c | 93 ++++---------------------------
1 file changed, 13 insertions(+), 80 deletions(-)
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
linux/drivers/media/video/upd64031a.c | 97 ++++------------------------------
1 file changed, 13 insertions(+), 84 deletions(-)
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
linux/drivers/media/video/upd64083.c | 96 ++++-------------------------------
1 file changed, 13 insertions(+), 83 deletions(-)
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
linux/drivers/media/video/tvaudio.c | 238 ++++++++++++++----------------------
1 file changed, 93 insertions(+), 145 deletions(-)
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Some devices do complicated tests whether the device can be probed or not.
Add a legacy_probe function pointer to support that.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
linux/include/media/v4l2-i2c-drv-legacy.h | 6 ++++++
linux/include/media/v4l2-i2c-drv.h | 6 ++++++
2 files changed, 12 insertions(+)
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
linux/drivers/media/video/cx25840/cx25840-core.c | 495 +++++++++--------------
1 file changed, 202 insertions(+), 293 deletions(-)
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
linux/drivers/media/video/cs53l32a.c | 94 ++---------------------------------
1 file changed, 8 insertions(+), 86 deletions(-)
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
linux/drivers/media/video/msp3400-driver.c | 135 +++--------------------------
1 file changed, 14 insertions(+), 121 deletions(-)
|
