| Age | Commit message (Collapse) | Author |
|---|
|
From: Trent Piepho <xyzzy@speakeasy.org>
Skip the parsing code that only make sense inside a Kconfig menu block
when not in a menu block. Mostly to get rid of Perl warnings.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
v4l/Makefile not only calls the kernel Makefile to do the module
building, but it is in turn included by the kernel Makefile. This means
_all_ the rules in v4l/Makefile get used by the kernel Makefile when it
tries to build the modules. Some of these rules, for files like .config,
Kconfig, .version, confuse the kernel building process. The kernel make
thinks, "I need to remake _my_ Kconfig file because my .version file is
out of date." But that rule was never supposed to be used by the kernel,
it is just for v4l!
This is fixed by putting $(obj) in front of all these files' rules. That
way the kernel will never think the rules refer to its files and try to
use them.
Really, this whole business of having the kernel Makefile include
v4l/Makefile is rather complex. It might be a good idea to create
v4l/Kbuild, which the kernel will use in preference to v4l/Makefile, so
that we don't have to worry about v4l/Makefile getting used in two
different contexts.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Bas Bloemsaat <bas.bloemsaat@gmail.com>
Trivial patch to make Compro PS39U WebCam work with linux by using the
vicam driver.
The camera is just a vicam with another USB ID, so I added that ID to the
driver, and it works now.
Signed-off-by: Bas Bloemsaat <bas.bloemsaat@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mike Isely <isely@pobox.com>
The pvrusb2 driver resolution limits are now programmed the following
way, based on empirical measurements of the hardware:
Vertical max: 480 for NTSC, 576 otherwise
Vertical min: 75 for 24xxx, 17 otherwise
Horizontal max: 720
Horizontal min: 720 for 24xxx, 19 otherwise
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
This repairs a problem introduced by a commit earlier today from
Mauro. Hans Verkuil gets the credit for solving this. I'm committing
it now because (a) nobody else has and (b) I'm stuck without it.
Thanks-to: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: "Bradley Kite" <bradley.kite@gmail.com>
The cx22702 returns an 8 bit unshifted value for signal strength; this is
inconsistent with most other frontends
Signed-off-by: Bradley Derek Kite <bradley.kite@gmail.com>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
|
|
From: Mike Isely <isely@pobox.com>
Support for 24xxx devices was previously explicitly bracketed with
CONFIG_VIDEO_PVRUSB2_24XXX inside the code because we didn't trust the
stability of these changes. We trust it now; so there's no reason to
leave this out of the driver anymore.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Last patch did included two experimental stuff there, on cx88
and on pvrusb2. Reverting...
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Scaling were not working fine;
Some reserved registers were wrong;
On some situations, saa7115 were not properly being initializated.
Removed some duplicated code.
Thanks-to: Hans Verkuil <hverkuil@xs4all.nl> for co-working on this
patch.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
Since Kconfig.sound is processed by make_kconfig.pl like all the other
Kconfig files, it was getting put into v4l/Kconfig twice. Once from a
source directive v4l/Kconfig and again when it was processed by the
script.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
Create a symlink, v4l/oss, that points back to the v4l directory. This
way code that includes "oss/something.h" will find the header files it
wants (which has been linked to from v4l). The link will be created only
if it doesn't exist and deleted by distclean.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
A subtle bug in the code that changed Kconfig depends expressions into
Perl expressions would keep changes to Kconfig variables from
propagating. The subroutine was supposed to change a _copy_ of the
expression from Kconfig to Perl syntax, but was changing the expression
itself.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
aci.c was missing compat.h, and both needed the mutex compat code for
kernels < 2.6.16.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
The VIDIOC_G_SLICED_VBI_CAP needs to receive the v4l2_buf_type field before
it can return a result. Hence this ioctl must be IOWR, not IOR. Since this
ioctl is still marked experimental we can make this change.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
VIDIOC_S/G_CROP is now handled by v4l2-ctl. The v4l2_buf_type is now filled in
in VIDIOC_G_SLICED_VBI_CAP. Several test tools now compile when v4l1 API is
disabled.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Without the breaks, saa7115 were not initializing PLL2.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Also fixed a scaling trouble
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
Both .config and Kconfig are created at the same time by the same
program, make_kconfig.pl. make does not understand the concept of
a program which creates two targets and cannot handle this properly.
Everything works with this patch, but in some cases make -j will run
make_kconfig.pl twice at the same time. This works, one script will just
overwrite the output of the other, but it looks bad. Without make -j,
everything works as it should and make_kconfig.pl isn't run more than it
needs to be.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
Restructure make_kconfig.pl and clean the code up some more.
The dependency tracking code is rewritten. This version converts the
"depends on" and "select X if" lines into Perl expressions, which are
then evaluated. This way all complex expressions are handled correctly.
Dependencies are tracked recursively until all are found. "select" lines
with an "if" clause are handled correctly; the selected variable is only
required when the "if" clause is true.
Another improvement is that hex/string/int variables that don't have
their dependencies met will not appear in the .config file. They aren't
supposed to.
make_kconfig will fail with an error message if MODULES is turned off in
the Kernel's config, as building out of tree makes no sense in that
situation.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
The script which combines the individual Makefils into Makefile.media
would include a Makefile each time it was referenced. This caused some
Makefiles to get included multiple times.
Also print comments in Makefile.media with the names of the Makefiles that
are being included.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
links is a phony target, so it is always remade. The config targets
don't need the source links, so there is no need for them to have links
as a depenedency.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
The make_makefile.pl script is re-written. The old one was nasty. This
one will correctly handle Makefile lines that are continued with a
backslash. It will also generate a dependency list of the Makefile used
to create Makefile.media. This way if any change, Makefile.media will be
automatically re-made by make.
The whole business where make_makefile.pl would call make_kconfig.pl is
removed.
The underlying logic of the main Makefile is completely changed. Make
has a feature where it will make sure any included files are up-to-date,
and then restart itself if any were updated. We now take advantage of
this feature.
Detect when make is building only targets which do not need include files
like .myconfig or Makefile.media, and don't include them in those cases.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
Add the ability to the make_kconfig.pl script to create a file
named ".kconfig.dep" which can be included in a Makefile and defines the
dependencies of the v4l/Kconfig file. That is, all the individual
Kconfig files that were used to make it.
Added a rule to v4l/Makefile to remake Kconfig when needed, and include
.kconfig.deps to get Kconfig's dependencies. Adjust the config targets
so that they depend on Kconfig, rather than including the commands to
create Kconfig in the config targets' scripts. The config targets no
longer depend on .version, as they don't need it themselves. Rather,
it's Kconfig that needs .version, so it's made one of Kconfig's
dependencies.
Add Kconfig as a dependency to .myconfig, it should be there since the
make_myconfig.pl script uses Kconfig.
Now if you change any of the Kconfig files, the v4l/Kconfig file will
automatically get remade. This will in turn cause .myconfig to be
re-made, and any new options will appear in .myconfig (turned off).
Ideally this should trigger some kind of oldconfig system to update
.config.
Fix the .version rule so that instead of re-creating .version every time,
it is only created when it didn't already exist. Since Kconfig depends
on .version, it was getting re-created every time too. If .version
existed, it would just get re-created to the same thing anyway.
Stop echoing the echo srcdir command itself and don't echo anything if
SRCDIR is blank.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
New code to read the Kernel's (or v4l-dvb's) '.config' file. This
replaces the code that used to read the config.h/autoconf.h file. In
2.6.18 the autoconf.h file no longer mentions options set to 'n' at all,
while .config has a comment line for each disabled option. Reading
.config is easier and gives us a list of the disabled options.
Restructure the code for reading '.version' too.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Still keeping the warning message for kernel-readers only.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Now, make will compile also the audio drivers at the tree.
By default, they will not be installed. A new option were
added to install those files:
make sound-install
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Although mentioned on several files at the tree, the GNU License file,
as used by default at the drivers, were missing at the tree.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Those files are not part of V4L stuff. However, they are or dependent of V4L
apis or used on some video boards.
After this patch, it will be possible to compile and test they against changes
at V4L API or drivers.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
"select" were overriding "depends on". A workaround were previously
been applied.
This patch removes the workaround and fixes the issue.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Thanks-to: Hans Verkuil <hverkuil@xs4all.nl> for testing it on ivtv.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
This script will read a Linux Kernel style Makefile tree and produce an
overview of the build process.
It produces three lists which show to associations of:
1. Kconfig variables to kernel module(s) built
2. Kernel modules to source file(s) that make them
3. Kconfig variables to source file(s) built
It can also check the Makefiles for various errors and warnings.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
Recently the name for the module symbol version file for external modules
changed from Modules.symvers to Module.symvers. Add the new name to
.hgignore.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Encoder API is still V4L1.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
saa7115 module is capable of calculating the proper FIR tables.
However, there were 4 hardcoded tables for the standard resolution.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
On SAA711x datasheets, registers are referenced by its numbers.
So, it is better to keep the number at register name. This way, it is
easier to seek that register at datasheet. Also, the alias helps to identify
what the meaning for each register.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
