summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-03-28saa7134: fix RTD Embedded Technologies VFG7350 support.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> This card has the saa6752hs on 7-bit address 0x21 instead of 0x20. Add support in the card definition struct to select which address to use and update the definitions accordingly. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-28bttv: tda9875 is no longer used by bttv, so remove from bt8xx/Kconfig.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Since tda9875 support was merged into tvaudio the bttv driver no longer needs tda9875 as helper driver. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-28bttv: convert to v4l2_subdev since i2c autoprobing will disappear.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Since i2c autoprobing will disappear bttv needs to be converted to use v4l2_subdev instead. Without autoprobing the autoload module option has become obsolete. A warning is generated if it is set, but it is otherwise ignored. Since the bttv card definitions are of questionable value a new option was introduced to allow the user to control which audio module is selected: msp3400, tda7432 or tvaudio (or none at all). By default bttv will use the card definitions and fallback on tvaudio as the last resort. If no audio device was found a warning is printed. The saa6588 RDS device is now also explicitly probed since it is no longer possible to autoprobe it. A new saa6588 module option was added to override the card definition since I suspect more cards have this device than one would guess from the card definitions. Note that the probe addresses of the i2c modules are hardcoded in this driver. Once all v4l drivers are converted to v4l2_subdev this will be cleaned up. Such data belongs in an i2c driver header. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-28cx231xx: Fix Kconfig help itemsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-28Fix compilation with kernels older than 2.6.20Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-27uvcvideo: Add zero fill for VIDIOC_ENUM_FMTLaurent Pinchart
From: Márton Németh <nm127@freemail.hu> When enumerating formats with VIDIOC_ENUM_FMT the uvcvideo driver does not fill the reserved fields of the struct v4l2_fmtdesc with zeros as required by V4L2 API revision 0.24 [1]. Add the missing initializations. The patch was tested with v4l-test 0.10 [2] with CNF7129 webcam found on EeePC 901. References: [1] V4L2 API specification, revision 0.24 http://v4l2spec.bytesex.org/spec/r8367.htm [2] v4l-test: Test environment for Video For Linux Two API http://v4l-test.sourceforge.net/ Priority: normal Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2009-03-27uvcvideo: Add support for Syntek cameras found in JAOtech Smart TerminalsLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2009-03-26Remove debug output from stb6100_cfg.hMauro Carvalho Chehab
From: Artem Makhutov <artem@makhutov.org> This patch removes the debug output from stb6100_cfg.h as it is flooding the syslog with tuning data during normal operation. Signed-off-by: Artem Makhutov <artem@makhutov.org> Acked-by: Manu Abraham <abraham.manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-28hdpvr: empty internal device buffer after stopping streamingJanne Grunau
From: Janne Grunau <j@jannau.net> Makes the next capturing starting faster and more reliable. Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-28hdpvr: convert printing macros to v4l2_* with struct v4l2_deviceJanne Grunau
From: Janne Grunau <j@jannau.net> it gives us a nice and unique prefix per device Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-28hdpvr: add struct v4l2_deviceJanne Grunau
From: Janne Grunau <j@jannau.net> Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-26[PATCH] pluto2: silence spew of card hung up messagesMauro Carvalho Chehab
From: Alan Cox <alan@lxorguk.ukuu.org.uk> If the card is ejected on some systems you get a spew of messages as other shared IRQ devices interrupt between the card eject and the card IRQ disable. We don't need to spew them all out Closes #7472 Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26[PATCH] cx88: Missing failure checksMauro Carvalho Chehab
From: Alan Cox <alan@lxorguk.ukuu.org.uk> The ioremap one was reported in October 2007 (Bug 9146), the kmalloc one was blindingly obvious while looking at the ioremap one The bug suggests some other configuration for lots of I/O memory (32MB per device is ioremapped) but I'll leave that to the real maintainers Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26allow v4l2 drivers to provide a get_unmapped_area handlerMauro Carvalho Chehab
From: Daniel Glöckner <dg@emlix.com> Shared memory mappings on nommu machines require a get_unmapped_area file operation that suggests an address for the mapping. This patch adds a way for v4l2 drivers to provide this callback. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-23merge: http://hg.jannau.net/hdpvr-merge/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-23merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-23merge: http://linuxtv.org/hg/~jfrancois/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-23hdpvr: Fix build with Config_I2C not setJanne Grunau
From: Janne Grunau <j@jannau.net> Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-23hdpvr: only build from 2.6.20.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-23ov7670: add missing delay.h include.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-23merge: v4l-dvbJean-Francois Moine
2009-03-22au0828: fix oops on ARM platform when allocating transfer buffersDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Add missing URB_NO_TRANSFER_DMA_MAP flag, since the use of consistent memory is not permitted for DMA on the ARM platform. Thanks to Paul Thomas <pthomas8589@gmail.com> for providing sample ARM hardware that was experiencing the oops (tested on the at91rm9200 based LinuxStamp). Thanks to David Brownell <david-b@pacbell.net> for providing insight into the ARM memory architecture. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-22em28xx: fix oops on ARM platform when allocating transfer buffersDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Add missing URB_NO_TRANSFER_DMA_MAP flag, since the use of consistent memory is not permitted for DMA on the ARM platform. Thanks to Paul Thomas <pthomas8589@gmail.com> for providing sample ARM hardware that was experiencing the oops (tested on the at91rm9200 based LinuxStamp). Thanks to David Brownell <david-b@pacbell.net> for providing insight into the ARM memory architecture. Priority: high Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-22usbvision: fix oops on ARM platform when allocating transfer buffersDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Add missing URB_NO_TRANSFER_DMA_MAP flag, since the use of consistent memory is not permitted for DMA on the ARM platform. Thanks to Paul Thomas <pthomas8589@gmail.com> for providing sample ARM hardware that was experiencing the oops (tested on the at91rm9200 based LinuxStamp). Thanks to David Brownell <david-b@pacbell.net> for providing insight into the ARM memory architecture. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-22em28xx: add remote control definition for HVR-900 (both versions)Devin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> The HVR-900 did not have a remote control defined, so it would not work. Add the line for both versions of the product. Thanks to Jens-Michael Hoffmann (#linuxtv user "jmho") for pointing out the issue and testing the patch. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-23get_dvb_firmware: add support for downloading the cx2584x firmware for pvrusb2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-23get_dvb_firmware: add cx23885 firmwaresMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-23get_dvb_firmware: Add download code for cx18 firmwaresMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-22gspca - vc032x: Change the probe sequence.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-22gspca - t613: Greater delay after om6802 reset.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-22gspca - t613: Don't re-read the ID registers at probe time.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-22gspca - t613: Bad sensor detection.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-22cx231xx: use usb_make_path() for bus_infoMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> VIDIOC_QUERYCAP should return the proper bus info. In the case of USB, this should be generated by usb_make_path(), being something like: usb-0000:00:1d.7-2 Priority: normal CC: Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-22cx231xx: dmesg cleanupMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Remove some printk's that were needed only during development phase. Also, cleans the printed messages to produce a nicer result. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-22cx231xx: don't print pcb config debug messages by defaultMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal CC: Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-22cx231xx: usb probe cleanupsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Simplifies the usb probe logic, cleaning the printed messages during the probing phase. Priority: normal CC: Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-22cx231xx: avoid trying to access unfilled dev structMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> cx231xxinfo needs dev->name. However, this is not declared on the time the check for the max number of supported devices is done. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-21cx231xx: fix an inverted logic at vidioc_streamoffMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal CC: Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-21cx231xx: Use generic names for each device blockMauro Carvalho Chehab
From: Sri Deevi <Srinivasa.Deevi@conexant.com> Priority: normal Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-20cx231xx: convert the calls to subdev formatMauro Carvalho Chehab
From: Sri Deevi <Srinivasa.Deevi@conexant.com> This patch converts cx231xx to the new v4l2 dev/subdev, doing: - Conversion of i2c calls to subdev calls; - all subdev calls to call_all(); - Corrected the header file order in cx231xx.h; - Added tuner frequency setting. Priority: normal Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-20Kconfig: replace all occurrences of CUSTOMIZE to CUSTOMISEMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> There are several Kconfig items using CUSTOMIZE. Yet, most use the English writing CUSTOMISE. This generates lots of trouble, because people sometimes type the Kbuild item different. Let's standardise every occurrence using the same syntax. The changes were generated by this small shell script: for i in `find linux -type f`; do sed s,CUSTOMIZE,CUSTOMISE,g $i >/tmp/a && mv /tmp/a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-20merge: http://hg.jannau.net/hdpvr-merge/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-19fix mispelled Hauppauge in HD PVR and PVR USB2 driver commentsJanne Grunau
Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-19tvaudio: always call init_timer to prevent rmmod crash.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> In the tvaudio_remove function del_timer_sync(&chip->wt) is called. However, chip->wt isn't always initialized depending on the type of audio chip. Since del_timer_sync hangs when given an uninitialized timer we should always initialize it. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-19get_dvb_firmware: Add option to download firmware for cx231xxMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-19merge: http://linuxtv.org/hg/~jfrancois/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-19merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-19gspca - ov534: New sensor ov965x and re-enable the webcam 06f8:3003.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-19gspca - ov534: Adjust the packet scan function.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> - change max payload size to 2040 bytes (was 2048) - optimize Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-19gspca - ov534: Bad frame pointer after adding the last packet.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 21:26:35 +0000