summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-02-06merge: http://linuxtv.org/hg/~mkrufky/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06merge: http://linuxtv.org/hg/~endriss/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06Merge: http://linuxtv.org/hg/~hverkuil/v4l-dvb2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-06Avoid race when deregistering the IR control for dvb-usbMauro Carvalho Chehab
From: Chris Rankin <rankincj@yahoo.com> The work item function is dvb_usb_read_remote_control(): INIT_WORK(&d->rc_query_work, dvb_usb_read_remote_control, d); and the last piece of work it does is: schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc_interval)); Hence you need to call "cancel_rearming_delayed_work()" and not "cancel_delayed_work()", correct? I certainly haven't seen this oops reoccur since I applied this patch. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-05cx25840 request_firmware failed due to wrong device.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Due to changes in the /sys directory structure a bug in the cx25840 firmware load surfaced in 2.6.20: the device passed to request_firmware was wrong: instead of the i2c device the i2c adapter was passed. Because of this an attemp was made to create a kobject with the adapter name inside the adapter directory, but a kobject with that name already exists. Now pass the i2c device itself so that the correct /sys directory is used. This way the firmware can be loaded again. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-05Backed out changeset a829a6ca77529b26451610ec6368ceeaa8103ebdMichael Krufky
From: Chris Rankin <rankincj@yahoo.com> Due to usb_to_input_id(), this change was completely unnecessary. These three lines are trying to do exactly what usb_to_input_id() does already. Remove them. Signed-off-by: Chris Rankin <rankincj@yahoo.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-02-04Forgot to test against V4L2_CTRL_FLAG_DISABLEDHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-03budget-av: Call saa7146_vv_release on exitOliver Endriss
From: Marco Schluessler <marco@lordzodiac.de> Call saa7146_vv_release on exit. Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-02-03Add cx23415 decoder register documentationHans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> Many thanks to Ian Armstrong for figuring out what all these registers do. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-03Fix CC handling in VIDIOC_INT_G_VBI_DATAHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> When capturing a 60 Hz input the internal field ID is inverted. The VIDIOC_INT_G_VBI_DATA didn't take that into account and so returned XDS instead of CC and vice versa. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-03Remove #if 0 section from videodev2.hHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Remove a section containing basically ideas for future sliced VBI standards. This can be resurrected should any of this be actually implemented. For now it only pollutes this header file. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-03Sliced VBI API no longer marked experimental.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The Sliced VBI API is no longer marked experimental. Introduced in 2.6.14 and with only a single modification in 2.6.19 I think we can consider this API to be solid. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-03Fix cx2584x revision reporting.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Revisions >= 23 were always reported as revision 23. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-03cx2341x encoder documentation update.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-02budget-ci: Add separate configuration data for subsystem 0x13c2:0x1012Oliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Fixed problem reported by Teemu Suikki: After a device with subsystem 0x13c2:0x1012 has been installed, devices with subsystem id 0x13c2:0x1011 did not work anymore. Reason: The driver for 0x13c2:0x1012 modified shared configuration data. Fix: Use separate configuration data for those devices. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-01-27qt1010: use i2c_gate_ctrl where appropriateMichael Krufky
From: Antti Palosaari <crope@iki.fi> This patch adds calls to i2c_gate_ctrl in the qt1010 dvb tuner module, while removing the temporary hack in au6610 and gl861. Tested successfully against fi-Oulu frequencies with MSI Megasky 580 GL861 and Sigmatek DVB-110 AU6610. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-21whitespace / 80-column cleanupsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-21kconfig: qt1010 should be selected by gl861 and au6610Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-21dvb: add new qt1010 tuner moduleMichael Krufky
From: Antti Palosaari <crope@iki.fi> gl861: (MSI Megasky) - hack for enable ZL10353 / QT1010 I2C gate - use new QT1010 module instead of old code au6610: (Sigmatek DVB-110) - hack for enable ZL10353 / QT1010 I2C gate - use new QT1010 module instead of old code Tested successfully with au6610 and gl861 devices against fi-Yllas frequencies. Now it locks perfectly with both devices. There is a "hack" to enable probable i2c gate in zl10535 demodulator. QT1010 doesn't respond to any i2c messages before we write 0x1a to demodulator register 0x62. In my understanding this should be fixed to demodulator code. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-11-05Initial support for Sigmatek DVB-110 DVB-TMichael Krufky
From: Antti Palosaari <crope@iki.fi> This patch adds driver for Sigmatek DVB-110 USB DVB-T stick. Stick has based on hardware of Qtuantek QT1010 tuner, Zarlink ZL10353 (Intel CE 6353) demodulator and Alcor Micro AU6610 DVB-T USB controller. HW is rather similar as used in MSI Megasky GL861. Currently, the driver works only in USB 2.0. In my understanding USB 1.1 is also supported by hw but I cannot test it due to lack of USB 1.1 port. Device supports only isochronous mode transfers. There is also eeprom in usb controller(at least in address range 0x80 - 0xbf) for storing data, eg. firmware. Anyway, firmware loading is not used / required by the device. There seems to be at least one unknown I2C device in address 0xa0, probably remote control or GPIO. Windows drivers reads registers from 0x00 to 0x07 from this unknown address. Driver is based on gl861 module. Tuner has a lot of problems to lock with megasky qt1010 module with this hardware with some broadcasting standards. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-09gl861: use parallel_tsMichael Krufky
From: Carl Lundqvist <comabug@gmail.com> - use parallel_ts - Now this driver works. - correct typo in MODULE_VERSION Signed-off-by: Carl Lundqvist <comabug@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-09gl861: remove unneeded declaration of .generic_bulk_ctrl_endpointMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> generic_bulk_ctrl_endpoint isn't being used in this device, so this is not needed here. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-07gl861: correct address of the bulk endpointMichael Krufky
From: Jan Nijs <jan.nijs@scarlet.be> The megasky 580 based on gl861 has three endpoints: - 0x81 BULK/ISOC IN MPEG2 TS - 0x83 INT IN remote control receiver - 0x02 BULK OUT bulk control endpoint It doesn't look like the bulk endpoint is used, but better to have the correct one in the config. Signed-off-by: Jan Nijs <jan.nijs@scarlet.be> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-07gl861: correct oops when loading moduleMichael Krufky
From: Jan Nijs <jan.nijs@scarlet.be> This patch moves the DVB_USB_IS_AN_I2C_ADAPTER flag from the adapter properties to the device properties. Without this patch I get an OOPS when the gl861 driver tries to access any registers. Signed-off-by: Jan Nijs <jan.nijs@scarlet.be> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03gl861: whitespace cleanupsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03gl861: remove NULL entry from gl861_propertiesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03gl861: use qt1010_tuner_attach function from qt1010.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The gl861_tuner_attach function is not specific to this device. This patch removes gl861_tuner_attach, and replaces it with qt1010_tuner_attach from the qt1010 header file. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03gl861: remove unneeded "extern int" declarationMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03gl861: hide disabled code from upstream patch systemMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> enclose disabled code inside an #if 0 block, instead of /* comments */ Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03gl861: fix driver_nameMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> rename driver_name from "gl861" to "dvb_usb_gl861" Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03gl861: fix MODULE_AUTHORMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The author's email address is already in the MODULE_AUTHOR field. This patch adds his name as well. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03gl861: select DVB_ZL10353 if !DVB_FE_CUSTOMISEMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03dvb-usb: rename USB_PID_MSI_MEGASKY55801 to USB_PID_MSI_MEGASKY580_55801Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03gl861: update versions.txt for v4l-dvb.hg local buildMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03dvb-usb: initial support for MSI Mega Sky 580 DVB-T based on GL861Michael Krufky
From: Carl Lundqvist <comabug@gmail.com> This patch adds support for MSI Mega Sky 580 / GL861 DVB-T USB2.0 Notes: Except for the 2 lines added to zl10353.c, zl10353_reset_attach needs to be changed. If I read the code correctly setting parallel_ts will take care of the 3rd byte, but the 2nd byte needs to be 0x0b instead of 0x03 too. I guess these changes needs to be done only for this device, not sure how to do that. The zl10353 changes have been split apart from this patch, into the next patch, soon to follow. Signed-off-by: Carl Lundqvist <comabug@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-23m920x: move filter caps from device caps to adapter capsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Move filter caps from device caps to adapter caps for the megasky driver. This fixes usb1.1 operation. Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-23m920x: group tuner / demod callback functions togetherMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-21whitespace / 80-column cleanupsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-21m920x: Fix tuner identification bug with qt1010 moduleMichael Krufky
From: Aapo Tahkola <aet@rasterburn.org> Fixes qt1010 identification bug with megasky caused by the Quantek QT1010 tuner module patch. Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-21kconfig: qt1010 should be selected by m920xMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-21dvb: add new qt1010 tuner moduleMichael Krufky
From: Antti Palosaari <crope@iki.fi> QT1010: - old qt1010-code totally rewritten and put in own kernel module - same enhancements as my earlier QT1010 125kHz patch - tuner initialization - register 1f calculation - register 20 calculation - register 25 calculation m920x: (MSI Megasky) - use new QT1010 module instead of old code Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-07m920x: correct oops when loading moduleMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> move .caps from the adapter properties to the device properties. Thanks to Martin Schwier for confirming this fix. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-07qt1010: correct hardlockup when an app access the DVB dongleMichael Krufky
From: Jan Nijs <jan.nijs@scarlet.be> This patch changes qt1010.h to use dvb_usb_device struct instead of a dvb_usb_adapter for accessing the private area of the driver. Without this patch my PC hard locks when an application tries to access the DVB tuner. Signed-off-by: Jan Nijs <jan.nijs@scarlet.be> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03m920x: fix build in hg tree / other trivial fixesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - removed extra newline - removed NULL entry - fixed versions.txt Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-09-28m920x: move qt1010_tuner_attach function into qt1010.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The megasky_tuner_attach function is not specific to this device. This patch renames it to qt1010_tuner_attach and moves it into the qt1010 header file. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-09-28m920x: more trivial cleanupsMichael Krufky
From: Patrick Boettcher <patrick.boettcher@desy.de> - Removed some needless brances - Removed an unneeded check for adapter[0] - Removed unneeded declaration of .generic_bulk_ctrl_endpoint = 0x01 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-09-28m920x: more cleanupsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Some cleanups and suggestions from Patrick Boettcher. Dropped the mutex in m9206_rc_query using #if 0, because M9206_CORE, M9206_I2C, M9206_FILTER and M9206_FW can be accessed concurrently. Thanks to both Aapo Tahkola and Patrick Boettcher. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-09-27m920x: misc updates and fixesMichael Krufky
From: Aapo Tahkola <aet@rasterburn.org> - hardware pid filtering no longer enabled unless in usb 1.x mode - more responsive rc handling - some minor bug fixes and code refolding - m9206_write delay dropped (doesn't seem to be needed) Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-09-23m920x: break out qt1010 tuner code into a separate fileMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> qt1010 is a tuner used in some other devices, so this code should be put into a separate file so that it could be reused by other drivers. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-09-23m920x: trivial cleanupsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 21:23:36 +0000