summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-08-03ivtv: report ivtv version in status log.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-01Add a quick howto explaining how to add a newer driver at the treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-01Frontend_ioctl(): fix check-after-useMauro Carvalho Chehab
From: Adrian Bunk <bunk@stusta.de> The Coverity checker spotted that we have already oops'ed if "fe" was NULL. Since "fe" being NULL seems impossible at this point this patch removes the NULL check. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-31cx8800: Add register debug functions to radio device tooTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Add the advanced debug functions to the radio videodev template. One could already use them from the video and vbi devices. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-08-01Fixed remote control for dib0700 with new firmwarePatrick Boettcher
From: Janne Grunau <janne-dvb@grunau.be> The new firmware returns the data of the REQUEST_POLL_RC request in reversed order. The default is RC5, but it can be adjusted using a module parameter. Signed-off-by: Janne Grunau <janne-dvb@grunau.be> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2007-07-31mt2131 s5h1409: correct frontend selection logicTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> If a card driver is compiled into the kernel and mt2131 or s5h1409 are compiled as modules, the kernel won't link. A compiled in driver can't use a module, so in this case the mt2131 or s5h1409 are effectively disabled w.r.t the compiled in driver and the stub attach function should be used. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Michael Krufky <mkrufky@linuxtv.org>
2007-07-31cx88: Wrong values used for HD-3000 radio modeTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> After some tedious work with a logic probe and a magnifying glass, I've determined that GPIO 7 is used to switch between the DTT7612's Sound 4.5 MHz IF output on pin 12 and the FM 10.7MHz If output on pin 11. GPIO 2 is used to switch the card's analog sound output from from the analog input connector to the CX23883's audio DACs. So, in radio mode GPIO2 = 1 and GPIO7 = 0. Add some comments about how the HD-3000's GPIOs are connected. Delete the vmux setting for the radio, as vmux doesn't apply to radio mode. Also delete the lines setting unused gpio words to zero; it's not necessary as 0 is the default value for uninitialized fields. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-07-31msp3400-driver.c: kmalloc + memset conversion to kzallocMauro Carvalho Chehab
From: Mariusz Kozlowski <m.kozlowski@tuxland.pl> drivers/media/video/msp3400-driver.c | 28945 -> 28898 (-47 bytes) drivers/media/video/msp3400-driver.o | 125620 -> 125320 (-300 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> CC: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-31videodev2.h: remove superfluous FBUF GLOBAL_INV_ALPHA supportHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> There is no need for a global inverted alpha capability since all the application has to do is to pass '255-alpha' as the global alpha value. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-31Module parameter description for SFN workaroundPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Thanks to Matt Doran I found that there the module parameter description was not OK. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2007-07-31Fix line-break in err outputPatrick Boettcher
From: Janne Grunau <janne-dvb@grunau.be> line-breaks in dib0700-remote-query function fixed. Signed-off-by: Janne Grunau <janne-dvb@grunau.be> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2007-07-31Fix support for DiB7000M-devicesPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Forgot to initialize the timf_default field. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2007-07-31ivtv: fix VIDIOC_S_FBUF support: new OSD values where never actually set.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The values set with VIDIOC_S_FBUF were not actually used until the next VIDIOC_S_FMT. Fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-31Add module parameter to enable SFN workaroundPatrick Boettcher
From: Matt Doran <matt.doran@papercut.biz> In some areas in the world the broadcasters are not using the same cellid for each transmitter in a SFN. The DiBcom has problems with that setup. The module parameter buggy_sfn_workaround makes it re-usable. Signed-off-by: Matt Doran <matt.doran@papercut.biz> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2007-07-30merge: http://www.linuxtv.org/hg/~stoth/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30Fix for size of remote keys in DiB0700Patrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Fix for size of remote control keys in DiB0700. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2007-07-30Use mutex instead of semaphore in the DVB frontend tuning interfaceMauro Carvalho Chehab
From: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> The DVB frontend tuning interface uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Satyam Sharma <satyam@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30Add support Compro VideoMate 500 with DiB7000PCPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Add support Compro VideoMate 500 with DiB7000PC. Another design of Compro uses the DiB7000PC and it has new USB ids. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2007-07-30Add remote keymap for the Hauppauge Nova-TD StickPatrick Boettcher
From: Janne Grunau <janne-dvb@grunau.be> Copied from drivers/media/dvb/dvb-usb/nova-t-usb2.c Signed-off-by: Janne Grunau <janne-dvb@grunau.be> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2007-07-30Add remote control support for the Hauppauge Nova-T 500Patrick Boettcher
From: Janne Grunau <janne-dvb@grunau.be> This patch adds remote control support for the Hauppauge Nova-T 500 using the same keys as for STK7700PD. Signed-off-by: Janne Grunau <janne-dvb@grunau.be> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2007-07-30include "compat.h" in v4l2-int-device.cMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> fix build with older kernels Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-07-30ivtv: fix semaphore / mutex compat for kernels 2.6.15 and earlierMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-07-30Add support for DiB7070-based devicesPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> This changeset adds support for DiB7070P-based devices by adding the dib0070-driver and putting the appropriate layouts into dib0700_devices.c It also includes a new firmware for the dib0700 which is necessary to make the DiB7070-boards work and it also should fix the i2c-problems on some boards. Signed-off-by: Jean-Philippe Sibers <jpsibers@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
2007-07-30Updates submission best practicesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> It is wise to send a patch to the low-level driver maintainer or to the subsystem maintainer, c/c the mailing list. This is a common practice at Linux community. Otherwise, it risks that the patch may stay forever at the mailing lists. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30Usb/vp7045.c: ARRAY_SIZE()Mauro Carvalho Chehab
From: Andi Drebes <lists-receive@programmierforen.de> This patch replaces an array size calculation done using sizeof with an invocation of the ARRAY_SIZE macro. Tested by compilation on an i386 box using "allyesconfig". Diffed against Linus' git-tree. Signed-off-by: Andi Drebes <lists-receive@programmierforen.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30Ttpci/budget-av.c: ARRAY_SIZE()Mauro Carvalho Chehab
From: Andi Drebes <lists-receive@programmierforen.de> This patch replaces an array size calculation done using sizeof with an invocation of the ARRAY_SIZE macro. Tested by compilation on an i386 box using "allyesconfig". Diffed against Linus' git-tree. Signed-off-by: Andi Drebes <lists-receive@programmierforen.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30Export v4l2_int_device_{, un}registerMauro Carvalho Chehab
From: Adrian Bunk <bunk@stusta.de> This patch fixes the following build error: <-- snip --> ... MODPOST 2135 modules make[2]: *** [__modpost] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-29videobuf_read_stream is more efficient than videobuf_read_oneMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-29dvb-pll: make struct dvb_pll_fcv1236d staticMichael Krufky
From: Adrian Bunk <bunk@stusta.de> The fcv1236d support patch was created before the "dvb: remove static dependencies on dvb-pll" patch was applied, but the fcv1236d patch didn't get merged until after the fact. struct dvb_pll_fcv1236d can become static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-07-28versions.txt: add DVB_TUNER_MT2131 and DVB_S5H1409Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-07-28whitespace cleanup for mt2131 and s5h1409Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - trivial whitespace cleanups - add "c-basic-offset: 8" to enforce tabbing style in emacs Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-07-28Stradis and zoran depend on virt_to_busMauro Carvalho Chehab
From: Stephen Rothwell <sfr@canb.auug.org.au> I assume that is why they were marked as !PPC64. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-27merge: http://linuxtv.org/hg/~endriss/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-27Dvb-usb/af9005-fe.c: error check fixesMauro Carvalho Chehab
From: Adrian Bunk <bunk@stusta.de> This patch: - adds a missing error check and - removes an error check that could never be true Both spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luca Olivetti <luca@ventoso.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-27Af9005 fix tuner module unloadMauro Carvalho Chehab
From: Luca Olivetti <luca@ventoso.org> This patch removes the useless tuner field and avoids a double free of the tuner (either mt2060 or qt1010). Signed-off-by: Luca Olivetti <luca@ventoso.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-27Sync with DiBcom Driver Release 2.1.3 + some improvementsPatrick Boettcher
From: Patrick Boettcher <pboettcher@dibcom.fr> This changesets syncs the OpenSource driver for DiBcom demodulators with version 2.1.3 of DiBcom reference driver. There were some improvements since the last release for linux-dvb, e.g.: - stepped AGC startup - less space for initialization - diversity synchronization Furthermore this changeset contains the following things: - latest AGC settings for MT2266-based devices (namely Nova-TD and other) will improve the sensitivity - support for STK7700D reference design in dib0700-devices - remove some line-breaks when debugging is enabled - getting rid of layer between frontend_parameters and ofdm_channel used in dib*-drivers Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
2007-07-27Update README.patches to reflect the newly-added hgimport scriptMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-27Add a script to allow cherry picking patches from another hg treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This script allows cherry picking patches from other mercurial trees. It identifies the newer patches yet not applied at the current tree and download they to a temporary dir. The script works with other local trees, as well as with remote URLs. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-27Add vp27smpx driverHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> This device is internal to the Panasonic VP27S tuner and is used to set the mono/stereo/bilingual setting of the tuner. It is used by two Japanese cx23416-based cards. Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-24tda10023: Remove range check of symbol rateOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Remove incorrect range check of symbol rate, spotted by the coverity checker and reported by Adrian Bunk. These range checks are performed by dvb_core now. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-07-24dvb_frontend: Range check of frequency and symbol rateOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Add range check of frequency and symbol rate to the FE_SET_FRONTEND ioctl. This will also avoid a divide-by zero exception in the stv0297 driver, if symbol rate is set to 0. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-07-23dvb-ttpci/saa7146: Replace saa7146_i2c_transfer by generic i2c_transferOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Convert av7110_v4l.c to use i2c_transfer() instead of saa7146_i2c_transfer(). Make saa7146_i2c_transfer() static. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-07-23Clean up duplicate includes in include/media/Mauro Carvalho Chehab
From: Jesper Juhl <jesper.juhl@gmail.com> This patch cleans up duplicate includes in include/media/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-23Clean up duplicate includes in drivers/media/Mauro Carvalho Chehab
From: Jesper Juhl <jesper.juhl@gmail.com> This patch cleans up duplicate includes in drivers/media/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-23merge: http://www.linuxtv.org/hg/~hverkuil/ivtv-fbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-23merge: http://linuxtv.org/hg/~tap/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-23http://linuxtv.org/hg/~mkrufky/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-23usbvision: fix bugs [sg]_register functionsTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> s_register was assigning the return code to (unsigned)reg->val, rather than errCode, which it what it would return. Except reg->val can't be < 0, so it would never actually return an error. g_register never actually put the value it read into reg->val. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-07-22ivtv-fb: improve debug message.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: update version to 1.1 to mark ivtv-fb support.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-01 10:33:20 +0000