summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-06-28Fix hghead to avoid adding bogus SOB'sMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> As reported by Michael Krufky: > sms1xxx: fix Siano board names > > From: Michael Krufky <mkrufky@linuxtv.org> > > Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> > Signed-off-by: <> > > > I have to "hg export tip > file && nano file {remove last line} && hg rollback && hg revert --all && hg import file" to fix it. > > What went wrong? :-/ Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-28sms1xxx: update MODULE_DESCRIPTIONMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> set MODULE_DESCRIPTION to "Driver for the Siano SMS1XXX USB dongle" Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-06-28sms1xxx: fix Siano board namesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-06-28Fix compat with older kernelsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-28cx18: Upgrade to newer firmware & update cx18 documentation.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Conexant graciously gave us permission to redistribute the firmware. Update the documentation where the firmware can be downloaded. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-28cx18: set correct audio inputs for tuner and line-in 2.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-28v4l2-dbg: if only the 'min' value is specified, then set max to min+0xffHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-28cx18: fix v4l-cx23418-dig.fw firmware load.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-28cxusb: add initial support for AVerTVHD VolarMichael Krufky
From: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Add initial support for this device. The AGC and tracking filter settings for the mxl5003 are known to be wrong, but it generally works. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-06-27lgdt330x: add additional FEC control configuration optionMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Allow the following configuration, by passing clock_polarity_flip = 2: Enable FEC automatic reset. Disable spectrum inversion. Enable viterbi resynchronization. Set polarity indicator high. Enable error flag insertion. Thanks to Daniel Gimpelevich, for discovering that this configuration is used on the AVerMedia AVerTVHD Volar. Cc: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-06-28cx18/ivtv: choose a better initial TV standard for cards without eeprom.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-27saa7134-empress: fix MPEG control supportHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The MPEG controls could not be enumerated and so could not be read or set through the v4l2-ctl utility or shown in control panels. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-30From: Laurent Pinchart <laurent.pinchart@skynet.be>Mauro Carvalho Chehab
USB Video Class driver This driver supports video input devices compliant with the USB Video Class specification. This means lots of currently manufactured webcams, and probably most of the future ones. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Notice: Due to MAINTAINERS file that isn't at mercurial tree, I've committed it on my -git and backported to -hg. kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-27Added the SBGGR16 format and fixed two memory leaks on pixfmt-test.Mauro Carvalho Chehab
From: Michael Schimek <mschimek@gmx.at> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-27v4l2-ctl: fix bug in --set-standardHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> --set-standard allows you to set a standard index corresponding to what ENUMSTD returns. But this clashes when you specify a standard whose ID is very small, like PAL-BG. Then the utility thinks you specified a standard index and will select the wrong standard. Fixed by using a flag to mark that the standard actually is a standard and not a standard index. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-27cx18: fix PAL/SECAM supportHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Reverted the 'Fix unintended auto configurations in cx18-av-core' patch, instead disable the auto config completely. Fix a bug in cx18_av_vbi_setup() where the standard tests were done in the wrong order. Tested with NTSC-M, PAL-BG, PAL-I, PAL-DK, PAL-M, PAL-Nc, SECAM-DK, SECAM-L and SECAM-BG. The last one does not work at the moment due to a tda9887.c bug. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-27merge: http://linuxtv.org/hg/~dougsland/cx23885-417Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-27Improves commit message scriptsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This patch improves message description sanity rules: - mailimport now prefers to edit using editdiff. This helps to fix trivial CodingStyle errors at receive patches; - hghead.pl will now remove blank whitespaces if no body exists; - "make commit" will now run hghead.pl. This will do some sanity checks at commit messages: *) Will warrant that "from:" metatag exists, avoiding to have patches without proper authorship id at someone's else tree; *) Will order the tags at the expected way (subject, from, body, signatures); *) Will warrant that one and just one blank line exists between each of the four parts of the commit message. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-27Fix a few bugs at the scriptMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-27saa7134: Avermedia A16D composite inputMauro Carvalho Chehab
From: Dan Taylor <dtaylor@startrac.com> Signed-off-by: Star Trac by Unisen, Inc. Dan Taylor <dtaylor@startrac.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-27cx23885-417: Replace cx23885_do_ioctl to use video_ioctl2Douglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@gmail.com> Convert cx23885-417 to use video_ioctl2 Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-06-26sms1xxx: add capability to define device-specific firmware filenamesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Add the capability to define device-specific firmware filenames for the SMS1150, with a mechanism to fall back to the generic firmware if the device-specific firmware is not present. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-06-25videodev: allow PRIVATE_BASE controls when called through VIDIOC_G/S_CTRL.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> V4L2_CID_PRIVATE_BASE controls are not allowed when called from VIDIOC_S/G_EXT_CTRL as extended controls use a better mechanism for private controls. But still allow it when called from the VIDIOC_G/S_CTRL to extended control conversion in video_ioctl2() for backwards compatibility. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-25Merge: from http://linuxtv.org/hg/~awalls/v4l-dvbHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-25ivtv/cx18: remove s/g_ctrl, now all controls are handled through s/g_ext_ctrlHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> videodev converts old-style controls to an extended control so the ivtv and cx18 drivers no longer have to handle both. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-25videodev: improve extended control support in video_ioctl2()Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> - add sanity checks for the extended controls argument. - if the driver only supports extended controls, then convert old-style controls to an extended control callback. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-25ivtv/cx18: fix compile error when CONFIG_VIDEO_ADV_DEBUG is not defined.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Thanks to Randy Dunlap for reporting this. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-24cx18: Improve Raptor card audio input routing defintionsAndy Walls
From: Andy Walls <awalls@radix.net> cx18: Improved Raptor card audio input routing defintions, so that muxer values matched cx18_gpio() values for tuner, line in 1, and radio and added LED indication of selected audio input. Audio line in 2 doesn't work as it uses the not yet supported 2nd I2S port. Tuner/FM Radio AF is mono until SIF support is fixed. Signed-off-by: Andy Walls <awalls@radix.net>
2008-06-24videodev: simplify get_index()Brandon Philips
Use Hans Verkuil's suggested method of implementing get_index which doesn't depend on class_for_each_device and instead uses the video_device array. This simplifies the code and reduces its memory footprint. Signed-off-by: Brandon Philips <bphilips@suse.de>
2008-07-17btaudio/tvmixer/miropcm20-rds: fix 2.6.16 compilationHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Missed a few warnings, this patch fixes them. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17videodev: add support for kernels < 2.6.19Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add the necessary compatibility code to handle the struct device/struct class_device differences. It was too much work (with uncertain benefits) to convert several drivers to handle kernels <2.6.19, so they are not built on these older kernels. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17videodev/dabusb/dvbdev: fix 2.6.16 compilationHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> struct file_operations was made const in 2.6.17. Cast const away when compiling under 2.6.16. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17gspca/tea575x-tuner: fix compilation for kernels <= 2.6.17Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17cx18/smsusb: fix compile errors when building for kernels < 2.6.19Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17v4l-dvb: fix compilation issues for kernel 2.6.21Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> - fix unused function warnings in v4l2-i2c-drv.h and v4l2-i2c-drv-legacy.h - fix ivtvfb.c compile warning that would in fact lead to an oops - disable DVB_DRX397XD for kernels <= 2.6.21: it needs div64_64 Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17mt9m001/saa7127: fix 2.6.25 kernel build warning/error.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Allow these to build for kernels < 2.6.26. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17ov7670: fix compile warningsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17saa7115: use saa7115_auto instead of saa711x as the autodetect driver name.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Having an _auto suffix is less ambiguous than a 'saa711x' identifier. It's also used like this in the saa7127 driver. Thanks to Jean Delvare for suggesting this. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17saa7127: Make device detection optionalHans Verkuil
From: Jean Delvare <khali@linux-fr.org> The saa7127 driver supports all of SAA7126, SAA7127, SAA7128 and SAA1729 devices. Declare all these devices, so that board drivers can tell which device is present, instead of always relying on auto-detection (which needs to write to the chip, eek!). We still need the detection for ivtv, so a special device name "saa7127_auto" can be used when the caller doesn't know exactly which device is present. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17cx18: move cx18_av_vbi_setup to av-core.c and rename to cx18_av_std_setupHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Same issue as for cx25840: this function sets up the standard timings and has nothing to do with VBI setup. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17ivtv/cx18: ensure the default control values are correctHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> For several MPEG controls and the volume control the default as returned by VIDIOC_QUERYCTRL was incorrect and did not match the actual initial value. This is now fixed for cx18 and ivtv. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17cx25840: move cx25840_vbi_setup to core.c and rename to cx25840_std_setupHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> cx25840_vbi_setup has nothing to do with setting up VBI, but everything with setting up the standard. Move to cx25840-core.c and rename. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17merge: http://linuxtv.org/hg/~jfrancois/gspca/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-17Don't increment if a patch were renamedMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-17Avoid running checkpatch.pl for merge patchesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-17soc_camera_platform: Add SoC Camera Platform driverMagnus Damm
This patch adds a simple platform camera device. Useful for testing cameras with SoC camera host drivers. Only one single pixel format and resolution combination is supported. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> --- drivers/media/video/Kconfig | 6 drivers/media/video/Makefile | 1 drivers/media/video/soc_camera_platform.c | 198 +++++++++++++++++++++++++++++ include/media/soc_camera_platform.h | 15 ++ 4 files changed, 220 insertions(+)
2008-07-17sh_mobile_ceu_camera: Add SuperH Mobile CEU driver V3Magnus Damm
This is V3 of the SuperH Mobile CEU soc_camera driver. The CEU hardware block is configured in a transparent data fetch mode, frames are captured from the attached camera and written to physically contiguous memory buffers provided by the newly added videobuf-dma-contig queue. Tested on sh7722 and sh7723 processors. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> --- Changes since V2: - remove SUPERH Kconfig dependency - move sh_mobile_ceu.h to include/media - add board callback support with enable_camera()/disable_camera() - add support for declare_coherent_memory - rework video memory limit - more verbose error messages Changes since V1: - fixed the CEU driver to work with the newly updated patches drivers/media/video/Kconfig | 8 drivers/media/video/Makefile | 1 drivers/media/video/sh_mobile_ceu_camera.c | 657 ++++++++++++++++++++++++++++ include/media/sh_mobile_ceu.h | 12 4 files changed, 678 insertions(+)
2008-07-16videobuf: Add physically contiguous queue code V3Magnus Damm
This is V3 of the physically contiguous videobuf queues patch. Useful for hardware such as the SuperH Mobile CEU which doesn't support scatter gatter bus mastering. Since it may be difficult to allocate large chunks of physically contiguous memory after some uptime due to fragmentation, this code allocates memory using dma_alloc_coherent(). Architectures supporting dma_declare_coherent_memory() can easily avoid fragmentation issues by using dma_declare_coherent_memory() to force dma_alloc_coherent() to allocate from a certain pre-allocated memory area. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> --- Changes since V2 - use dma_handle for physical address - use "scatter gather" instead of "scatter gatter" Changes since V1: - use dev_err() instead of pr_err() - remember size in struct videobuf_dma_contig_memory - keep struct videobuf_dma_contig_memory in .c file - let videobuf_to_dma_contig() return dma_addr_t - implement __videobuf_sync() - return statements, white space and other minor fixes drivers/media/video/Kconfig | 5 drivers/media/video/Makefile | 1 drivers/media/video/videobuf-dma-contig.c | 417 +++++++++++++++++++++++++++++ include/media/videobuf-dma-contig.h | 32 ++ 4 files changed, 455 insertions(+)
2008-07-16videobuf: Fix gather spellingMagnus Damm
Use "scatter gather" instead of "scatter gatter". Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> --- drivers/media/video/videobuf-dma-sg.c | 2 +- drivers/media/video/videobuf-vmalloc.c | 2 +- include/media/videobuf-dma-sg.h | 2 +- include/media/videobuf-vmalloc.h | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)
2008-07-11soc_camera: Add 16-bit bus width supportMagnus Damm
The SuperH Mobile CEU hardware supports 16-bit width bus, so extend the soc_camera code with SOCAM_DATAWIDTH_16. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> --- include/media/soc_camera.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-03 20:21:11 +0000