| Age | Commit message (Collapse) | Author |
|---|
|
From: Dmitri Belimov <d.belimov@gmail.com>
Fix error for AC-3 control of the 6752HS MPEG-2 coder.
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Igor M. Liplianin <liplianin@me.by>
It does matter to set explicitly gpio0 value in
cx88_board structure for TBS 8920 card.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com>
Makes zl10353 a bit more DVB API compliant:
FE_READ_UNCORRECTED_BLOCKS - keep a counter of UNC blocks
FE_GET_FRONTEND - return last set frequency instead of zero
Signed-off-by: Aleksandr V. Piskunov <alexandr.v.piskunov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Julia Lawall <julia@diku.dk>
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@haskernel@
@@
@depends on haskernel@
expression x,__divisor;
@@
- (((x) + ((__divisor) / 2)) / (__divisor))
+ DIV_ROUND_CLOSEST(x,__divisor)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Henrik Kurelid <henke@kurelid.se>
The AVC protocol uses the same command for tuning and PID filtering and
since dvb-core uses a software zigzagging to do automatic retuning this
could cause all PID filters to be cleared. PID filter information is
now included in all DSD commands to the card.
Background:
There is a problem in the firedtv driver that causes recordings to stop
if the SW zigzag algorithm in dvb-core kicks in with a retune after the
application has set up the PID filters. Since tuning and setting PID
filters uses the same AVC command (DSD) and only the replace subfunction
is supported by the card, it is not possible to do a retune without
setting the PID filters. This means that the PID filtering has to be
sent in each tune.
This problem applies to C and T cards since S and S2 cards tune using a
vendor specific command. The patch corrects the problem by sending the
PID list in each tune. I have tested it on my T card with a good
result.
How to trigger problem: Zap to a channel and output AV to a file, e.g.
"tzap -c channels.conf SVT1 -r -o SVT1.ts". After a short while, pull
the antenna cable from the card. The lock on the channel will disappear
and the TS file will stop increasing in size. Wait a couple of seconds.
Replug the cable again. You will get a lock on the channel again, but
the TS file will never increase in size agains sinze no PIDS are
filtered.
Tested with kaffeine with DVB-T and DVB-C: Fixes retuning after antenna
was plugged out and back in with DVB-T. Does not fix this with DVB-C,
but also doesn't regress on DVB-C.
Signed-off-by: Henrik Kurelid <henrik@kurelid.se>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Julian Scheel <julian@jusst.de>
Attached is a patch which fixes tuning to low frequency channels with
stb0899+tda8261 cards like the KNC TV-Station DVB-S2.
The cause of the issue was a broken if construct, which should have been
an if/else if, so that the setting for the lowest matching frequency is
applied.
Without this patch for example tuning to "arte" on Astra 19.2, 10744MHz
SR22000 failed most times and when it failed the communication between
driver and tda8261 was completely broken.
This problem disappears with the attached patch.
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Hans de Goede <hdegoede@redhat.com>
Now that we've figured out the higher compression settings (supported in
libv4l-0.6.0 and later, so after this patch the driver should be used with
libv4l-0.6.0 or higher only!), we can enable higher framerates. Which
means lower exposure times, which is important for the use of the pac207
in full daylight.
This patch also tweakes the brightness default and the per color gain
balances to use the values which are adviced by Pixart in the pac207
application note.
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Hans de Goede <hdegoede@redhat.com>
gspca_pac207: remove a number of unneeded (repeated) register writes
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Even devices without ac97 needs to call analog audio setup function, to
properly set xclk and mute/unmute.
Thanks to Angelo Cano <acano@fastmail.fm> for reporting and testing it.
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
This device uses msp34xx and uses 2.048 MHz frequency for I2S
communication.
Thanks to Angelo Cano <acano@fastmail.fm> for pointing the issues with
this device and proposing an approach for fixing the issue.
Priority: normal
Tested-by: Angelo Cano <acano@fastmail.fm>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Hans de Goede <hdegoede@redhat.com>
libv4l: update upside down devices table
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Hans de Goede <hdegoede@redhat.com>
libv4l: allow use of System / Product DMI strings in upside down cam list
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Hans de Goede <hdegoede@redhat.com>
libv4l: update upside down devices table
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Add new USB ID (1b80:e400) for KWorld PlusTV Dual DVB-T Stick (DVB-T 399U).
The model number on the devices sticker label is "KW-DVB-T 399UR".
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
As asked by Jarod Wilson, this patch doesn't work properly. Reverting it.
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
These changes were a direct result of using a semantic patch
More information can be found at http://www.emn.fr/x-info/coccinelle/
Priority: normal
[mchehab@redhat.com: fix a merge conflict]
Signed-off-by: Stoyan Gaydarov <sgayda2@uiuc.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Julia Lawall <julia@diku.dk>
It seems from other code that it is the dst_type field rather than the
type_flags field that contains values of the form DST_TYPE_IS...
The type_flags field contains values of the form DST_TYPE_HAS...
The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@ struct dst_state E; @@
(
*E.type_flags ==
\( DST_TYPE_IS_SAT\|DST_TYPE_IS_TERR\|DST_TYPE_IS_CABLE\|DST_TYPE_IS_ATSC \)
|
*E.type_flags !=
\( DST_TYPE_IS_SAT\|DST_TYPE_IS_TERR\|DST_TYPE_IS_CABLE\|DST_TYPE_IS_ATSC \)
)
// </smpl>
CC: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Jarod Wilson <jarod@redhat.com>
The dvb side of the pcHDTV HD-3000 doesn't work since at least 2.6.29.
The crux of the problem is this: the HD-3000's device ID matches the
modalias for the cx8800 driver, but not the cx8802 driver, which is
required to set up the digital side of the card. You can load up
cx8802 just fine, but cx88-dvb falls on its face, because the call
to cx8802_register_driver() attempts to traverse the cx8802_devlist,
which is completely empty. The list is only populated by the
cx8802_probe() function, which never gets called for the HD-3000, as
its device ID isn't matched by the cx8802 driver, so you wind up
getting an -ENODEV return from cx8802_register_driver() back to
cx88-dvb, and as a result, no digital side of the card for you.
Long story short, by simply adding a vendor/device/subvendor/subdevice
block to cx88-mpeg.c, cx8802_probe() will run, the cx88-2_devlist
will get populated, cx8802_register_driver() won't fail, and cx88-dvb
can actually load up all the way on this card. Channel scanning is
of course currently failing for me still (works fine on several other
cards I have handy), but that's another problem for another day...
There might be a Better Way to do this, and I'm open to suggestions
and willing to try them out, but this Works For Me.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Gregor Jasny <gjasny@googlemail.com>
While studying the Debian library package name, I noticed that private
So /usr/lib/libv4l should become /usr/lib/libv4l0. As this would break
existing scripts, I suggest to start versioning with the next soname bump.
The line in the makefiles will then read:
ifeq ($(LIBSUBDIR),)
LIBSUBDIR = libv4l$(LIB_RELEASE)
endif
Unfortunately, the private subdirs in Debian must be named after the library
package, which would be libv4l-0. Therefore I need to configure the
LIBSUBDIR at compile time.
Priority: normal
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Hans de Goede <hdegoede@redhat.com>
libv4l: update upside down devices table
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Nam Phạm Thành <phamthanhnam.ptn@gmail.com>
This patch adds support for Humax/Coex DVB-T USB Stick 2.0 High Speed
which is a very popular tuner sold in Vietnam.
Tested with at least 3 tuners.
CC: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Pham Thanh Nam <phamthanhnam.ptn@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Hans de Goede <hdegoede@redhat.com>
libv4l: update upside down devices table
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Hans de Goede <hdegoede@redhat.com>
libv4l: update upside down devices table
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Hans de Goede <hdegoede@redhat.com>
libv4l: update upside down devices table
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Hans de Goede <hdegoede@redhat.com>
Improved pac207 decompression code to also support higher compression
modes of the pac207, which enables us to use higher framerates.
Many many thanks to Bertrik Sikken for figuring the decompression out!
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Hans de Goede <hdegoede@redhat.com>
libv4l: update upside down devices table
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Hans de Goede <hdegoede@redhat.com>
libv4l: update upside down devices table
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Hans de Goede <hdegoede@redhat.com>
libv4l: update upside down devices table
Priority: normal
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Jean Delvare <khali@linux-fr.org>
Kernels 2.6.22 to 2.6.24 (inclusive) need some compatibility quirks
for the hrtimer API. For older kernels, some required functions were
not exported so there's nothing we can do. This means that drivers
using the hrtimer infrastructure will no longer work for kernels older
than 2.6.22.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Patch solves problem of missed keystrokes on some remote controls,
as reported on http://bugzilla.kernel.org/show_bug.cgi?id=9637 .
Changes of version 2:
* Driver no longer builds on kernels < 2.6.22, so add an entry to
v4l/versions.txt
* Add a missing static.
Build-tested on 2.6.22.
Priority: normal
Signed-off-by: Andrzej Hajda <andrzej.hajda@wp.pl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
[mchehab@redhat.com: this patch will be merged with version 1 for upstream submission]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
It were using 7 spaces instead of tab for indent.
CC: Janne Grunau <j@jannau.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
It were using 7 spaces instead of tab for indent.
CC: Erik Andren <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
It were using 7 spaces instead of tab for indent.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
It were using 7 spaces instead of tab for indent.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
The patch that aded ASUSTeK P7131 Analog were using 7 spaces instead of tab,
probably due to some bad cut-and-paste.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
On VIDEO_M52790 and USB_GSPCA_SN9C20X, instead of tab, it were
using 7 whitespaces at the beginning, probably due to some
cut-and-paste trouble.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Currently, em28xx driver outputs webcams only at RGB565 format. However,
several webcam applications don't support this format.
In order to properly work with those applications, a RGB565 handler should be
added at libv4l.
Tested with Silvercrest 1.3 mpix with v4l2grab (V4L2, with native libv4l
support) and two LD_PRELOAD applications: camorama (V4L1 API) and skype (using compat32).
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
From: Andrzej Hajda <andrzej.hajda@wp.pl>
Patch solves problem of missed keystrokes on some remote controls,
as reported on http://bugzilla.kernel.org/show_bug.cgi?id=9637 .
Signed-off-by: Andrzej Hajda <andrzej.hajda@wp.pl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Since applications aren't prepared to handle all V4L2 available formats,
an effort is done to have a library capable of understanding especially
the proprietary formats.
This patch documents this library, and adds v4l2grab.c as an example on
how to use it.
Parts of the text are based at the libv4l README file (c) by Hans de
Goede.
Thanks to Hans de Goede <hdegoede@redhat.com> for his good work with
libv4l.
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Igor M. Liplianin <liplianin@me.by>
Add Compro VideoMate S350 DVB-S driver.
The card uses zl10313, zl10039, saa7130 integrated circuits.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
|
|
From: Udi Atar <udia@siano-ms.com>
Update KConfig file to enbale selection of SDIO and USB
interfaces, and add dependancy on relevant modules.
Priority: normal
Signed-off-by: Udi Atar <udia@siano-ms.com>
[mchehab@redhat.com: fix merge conflicts and remove default: m]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Thanks to Robert P.J. Day for finding this.
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Thanks-to: Robert P.J. Day <rpjday@crashcourse.ca>
|
