summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-03-27add linux/include/linux/mmc/sdio_ids.h to the out-of-kernel treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-27Fix printk format warning:Mauro Carvalho Chehab
From: Randy Dunlap <randy.dunlap@oracle.com> drivers/media/video/zoran/zoran_driver.c:345: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'phys_addr_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-25tda827x: fix locking issues with DVB-CMauro Carvalho Chehab
From: klaas de waal <klaas.de.waal@gmail.com> Separate tuning table for DVB-C solves tuning problem at 388MHz TechnoTrend C-1501 DVB-C card does not lock on 388MHz. I assume that existing frequency table is valid for DVB-T. This is suggested by the name of the table: tda827xa_dvbt. Added a table for DVB-C with the name tda827xa_dvbc. Added runtime selection of the DVB-C table when the tuner is type FE_QAM. This should leave the behaviour of this driver with with DVB_T tuners unchanged. This modification is in file tda827x.c The tda827x.c gives the following warning message when debug=1: tda827x: tda827x_config not defined, cannot set LNA gain! Solved this by adding a tda827x_config struct in budget-ci.c. Priority: normal Signed-off-by: Klaas de Waal <klaas.de.waal@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-24changed ioctls to unlockedMauro Carvalho Chehab
From: Stoyan Gaydarov <stoyboyker@gmail.com> Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26merge: http://linuxtv.org/hg/~awalls/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26merge: http://hg.jannau.net/hdpvr-merge/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-27hdpvr: locking fixesJanne Grunau
From: Janne Grunau <j@jannau.net> unlock io_mutex in hdpvr_stop_streaming hdpvr_disconnect to allow the streaming worker to stop before we flush the workqueue. do not return to user space with mutex held in vidioc_encoder_cmd with an unknown encoder command. Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-26hdpvr: return immediately from hdpvr_poll if data is availableJanne Grunau
From: Janne Grunau <j@jannau.net> simplifies check for available data with hdpvr_get_next_buffer Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-26hdpvr: set usb interface dev as parent in struct video_deviceJanne Grunau
From: Janne Grunau <j@jannau.net> Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-27hdpvr: use debugging macro for buffer statusJanne Grunau
From: Janne Grunau <j@jannau.net> Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-26ce6230: avoid using unitialized varMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> drivers/media/dvb/dvb-usb/ce6230.c: In function ‘ce6230_i2c_xfer’: drivers/media/dvb/dvb-usb/ce6230.c:107: warning: ‘ret’ may be used uninitialized in this function Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26avoid warnings for request_ihex_firmware on dabusb and vicamMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> drivers/media/video/usbvideo/vicam.c: In function ‘vicam_open’: drivers/media/video/usbvideo/vicam.c:194: warning: ‘fw’ may be used uninitialized in this function drivers/media/video/dabusb.c: In function ‘dabusb_probe’: drivers/media/video/dabusb.c:337: warning: ‘fw’ may be used uninitialized in this function Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26v4lgrab: fix compilation warningsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Documentation/video4linux/v4lgrab.c: In function ‘main’: Documentation/video4linux/v4lgrab.c:193: warning: ‘src_depth’ is used uninitialized in this function Documentation/video4linux/v4lgrab.c:108: warning: ‘b’ may be used uninitialized in this function Documentation/video4linux/v4lgrab.c:108: warning: ‘g’ may be used uninitialized in this function Documentation/video4linux/v4lgrab.c:108: warning: ‘r’ may be used uninitialized in this function Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26pvrusb2: add a missing source at MakefileMauro Carvalho Chehab
From: Kyle McMartin <kyle@redhat.com> As pointed by Steve Dickson, pvrusb2 Makefile was not compiling pvrusb2-cx53l32a driver. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-26gspca - doc: Add the 15b8:6001 webcam to the Documentation.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-26gspca - zc3xx: The webcam DLink DSB - C320 has the sensor pas106.Jean-Francois Moine
From: Douglas Schilling Landgraf <dougsland@redhat.com> Reported-by: Bruna Griebeler <bruna@griebeler.com> Priority: normal Tested-by: Bruna Griebeler <bruna@griebeler.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-26gspca - sonixj: Prefer sonixj instead of sn9c102 for 0471:0327.Jean-Francois Moine
From: Hans de Goede <hdegoede@redhat.com> Prefer the gspca sonixj driver for the Philips SPC600NC webcam instead of the sn9c102 driver. As we've got userreports that it works with the gspca driver, whereas it fails with the sn9c102 driver, see: https://bugzilla.redhat.com/show_bug.cgi?id=477111 Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-26gspca - finepix: Use a workqueue for streaming.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Tested-by: Frank Zago <frank@zago.net> Acked-by: Frank Zago <frank@zago.net> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-26gspca - sq905: Optimize the resolution setting.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-26gspca - sq905: Update the frame pointer after adding the last packet.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-25merge: http://linuxtv.org/hg/~anttip/ce6230/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-25hg merge: http://linuxtv.org/hg/~jfrancois/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-25Add driver for Intel CE6230 DVB-T USB2.0Antti Palosaari
From: Antti Palosaari <crope@iki.fi> Add driver for Intel CE6230 DVB-T USB 2.0 COFDM demodulator Priority: normal Signed-off-by: Antti Palosaari <crope@iki.fi>
2009-03-25zl10353: add support for Intel CE6230 and Intel CE6231Antti Palosaari
From: Antti Palosaari <crope@iki.fi> Add chip IDs and configuration registers needed for Intel CE6230 and Intel CE6231. Priority: normal Signed-off-by: Antti Palosaari <crope@iki.fi>
2009-03-25gspca - sq905c: New subdriver.Jean-Francois Moine
From: Theodore Kilgore <kilgota@auburn.edu> The code in the new sq905c.c is based upon the structure of the code in gspca/sq905.c, and upon the code in libgphoto2/camlibs/digigr8, which supports the same set of cameras in stillcam mode. I am a co-author of gspca/sq905.c and I am the sole author of libgphoto2/camlibs/digigr8, which is licensed under the LGPL. I hereby give myself permission to use my own code from libgphoto2 in gspca/sq905c.c. Priority: normal Signed-off-by: Theodore Kilgore <kilgota@auburn.edu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-25gspca - vc032x: Use YVYU format for sensor mi1320_soc.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-25gspca - vc032x: Simplify the i2c write function.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-24pvrusb2: Use v4l2_device_disconnect()Mike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-24merge: v4l-dvbJean-Francois Moine
2009-03-23mxl5005s: Switch in mxl5005s_set_params should operate on correct valuesAndy Walls
From: Andy Walls <awalls@radix.net> Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-03-23merge: http://hg.jannau.net/hdpvr-merge/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-23merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-23merge: http://linuxtv.org/hg/~jfrancois/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-23hdpvr: Fix build with Config_I2C not setJanne Grunau
From: Janne Grunau <j@jannau.net> Priority: normal Signed-off-by: Janne Grunau <j@jannau.net>
2009-03-23hdpvr: only build from 2.6.20.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-23ov7670: add missing delay.h include.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-23gspca - vc032x: New sensor mi1320_soc and webcam 15b8:6001 added.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-23merge: v4l-dvbJean-Francois Moine
2009-03-22au0828: fix oops on ARM platform when allocating transfer buffersDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Add missing URB_NO_TRANSFER_DMA_MAP flag, since the use of consistent memory is not permitted for DMA on the ARM platform. Thanks to Paul Thomas <pthomas8589@gmail.com> for providing sample ARM hardware that was experiencing the oops (tested on the at91rm9200 based LinuxStamp). Thanks to David Brownell <david-b@pacbell.net> for providing insight into the ARM memory architecture. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-22em28xx: fix oops on ARM platform when allocating transfer buffersDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Add missing URB_NO_TRANSFER_DMA_MAP flag, since the use of consistent memory is not permitted for DMA on the ARM platform. Thanks to Paul Thomas <pthomas8589@gmail.com> for providing sample ARM hardware that was experiencing the oops (tested on the at91rm9200 based LinuxStamp). Thanks to David Brownell <david-b@pacbell.net> for providing insight into the ARM memory architecture. Priority: high Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-22usbvision: fix oops on ARM platform when allocating transfer buffersDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Add missing URB_NO_TRANSFER_DMA_MAP flag, since the use of consistent memory is not permitted for DMA on the ARM platform. Thanks to Paul Thomas <pthomas8589@gmail.com> for providing sample ARM hardware that was experiencing the oops (tested on the at91rm9200 based LinuxStamp). Thanks to David Brownell <david-b@pacbell.net> for providing insight into the ARM memory architecture. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-22em28xx: add remote control definition for HVR-900 (both versions)Devin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> The HVR-900 did not have a remote control defined, so it would not work. Add the line for both versions of the product. Thanks to Jens-Michael Hoffmann (#linuxtv user "jmho") for pointing out the issue and testing the patch. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-23get_dvb_firmware: add support for downloading the cx2584x firmware for pvrusb2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-23get_dvb_firmware: add cx23885 firmwaresMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-23get_dvb_firmware: Add download code for cx18 firmwaresMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-22gspca - vc032x: Change the probe sequence.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-22gspca - t613: Greater delay after om6802 reset.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-22gspca - t613: Don't re-read the ID registers at probe time.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-22gspca - t613: Bad sensor detection.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-03-22cx231xx: use usb_make_path() for bus_infoMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> VIDIOC_QUERYCAP should return the proper bus info. In the case of USB, this should be generated by usb_make_path(), being something like: usb-0000:00:1d.7-2 Priority: normal CC: Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-06 12:27:10 +0000