summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-01-06tda18271: report when the RF tracking filter calibration has completedMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-09tda18271: clean up chip id logic in tda829x_releaseMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This test is easier to read. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-08tda18271: give calibration debug a separate debug maskMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> We don't usually want to see the calibration debug messages, but sometimes it is useful. Assign it to a separate debug mask. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-08tda18271: add support for fm radioMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-06tda18271: share state between analog and digital tuner instancesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-06tda18271: use a mutex to protect state in critical sectionsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-05tda18271: store frequency and bandwidth after successful tuneMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Store last tuned frequency & bandwidth after successful tune. Clean up tune functions -- remove pointer to tune function in state structure, instead call tune function based on priv->id. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-05tda18271: clean up calibration initialization proceduresMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Always initialize registers during attach. Perform IR Calibration during init if needed. Perform RF Calibration during init if needed for C2, only. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-05merge: http://linuxtv.org/hg/~mkrufky/pendingMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05merge: http://linuxtv.org/hg/~mkrufky/tda18271c2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05Add Radio support for em28xxMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05Properly implement 12MHz I2S supportMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05There isn't a MTS radio firmwareMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Try to load non-MTS firmware instead. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05Fix radio set frequency logicMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05tda18271: fix analog tuning regression caused by earlier changesetMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> An earlier patch, "tda18271: fail table lookups if frequency is out of range" broke analog support on certain hardware. This patch fixes that problem, by allowing the RF_CAL byte to be set to the maximum value, in cases of the frequency being out of range. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-05Add code for autoloading em28xx-alsa, if neededMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Older em28xx devices does implement standard Audio Class. However, on newer devices, this were replaced by a Vendor Class. This patch autodetects that an em28xx lacks Audio Class and auto-loads em28xx-alsa, for the devices that implements only a Vendor Class. For devices with Audio Class, snd-usb-audio module will provide an ALSA interface. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05Integrates em28xx-audio.c into em28xx kernel moduleMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Also fixes the remaining CodingStyle issues that Lindent didn't fix. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05Lindent em28xx-audio.cMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05Adds em28xx-audio moduleMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> em28xx-audio module exports em28xx Vendor Class audio as an -alsa driver. This module were written based on usbaudio driver by Markus Rechberger. Recently, he acked to allow us to merge it on kernel: http://lists-archives.org/video4linux/20408-supporting-prolink-pixelview-405-dvd-maker.html Thanks to Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05HVR950 requires additional settings for audio to properly workMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Thanks to Markus Rechberger <mrechberger@gmail.com> for retriving those commands. Also, MTS firmware is required for audio to work on HVR950. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05Improve audio setup handlingMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> It is possible to select audio inputs via em28xx or via ac97 functions. This patch allows configuring a board to use either one way. It also do some cleanups at audio setup configurations. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-02tda18271: document debug level and configuration parametersMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Document debug level module options and tda18271_config attach-time parameters. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-02tda18271: store IF frequency in a u16 instead of u32Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Store IF Frequency in a u16 instead of a u32. Multiply by 1000 before use. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-02Adds device file name to General tabMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-02Show board id at general tab on qv4l2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> When you have several boards inside a machine, you need to know what board qv4l2 is using. This patch presents driver, board name and bus id, to help identifying the board. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-02tda18271: allow device-specific configuration of IF frequency and std bitsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Allow drivers to pass device-specific configuration parameters during attach. If these parameters are omitted, default values will be used. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-01tda18271: move common code to tda18271-common.cMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Move some common code to a new file to make this easier to look at. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-01tda18271: add support for NXP TDA18271HD/C2Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Tested successfully with QAM256 digital cable. Analog television is limping, needs more work. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-01tda18271: add MODULE_VERSIONMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> version 0.1 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-01tda18271: clean up function tda18271_set_analog_paramsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> make set_analog_params function look consistent with set_params function Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-01Fix in-kernel ivtv compilationMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Due to tuner-xc2028.h, some extra directories should be added at .h search. CC: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-01Fix script to work on 32 bit intMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> The previous version used to require that perl to run on 64 bit machines. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-01Avoid needing to run perl script on machines with 64-bit intMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-31Optimize scriptMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> The previous script were generated using a non-optimized way. This patch replaces the script with an optimized one, where each firmware is direcly copied from HVR12x0 driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-31Improve method 1Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Xceive firmwares seem to use Big Endian for encoding size, delay and reset. Kernel drivers uses Little Endian. Before this patch, method 1 were fixing endian only for size. This patch changes the behavior to change endian also for delay and reset. With this change, with HVR12x0 file, method (1) works for all firmwares. This produces a very optimized script. The seek method is known to work with firmwares version 2.7 and 2.5. However, drivers with firmware version 1.x have a different internal format. So, another seek method will be required to allow the script to work on those firmwares. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-31Add a tool to generate firmware extracting scripts for xc3028Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This is the tool used to generate extract_xc3028.pl. Once you have a firmware file, generated from other methods, like usb dumps, this tool allows to seek the firmware inside a windows driver, creating an extrating script. There are two methods to seek for a firmware: 1) a complete firmware seek; 2) seek for firmware hunks. For each firmware segment, it writes the segment size, and seeks for the segment inside the firmware. The result of method 2) is not optimized. In the case of hvr12x0 driver, the base firmwares didn't hit method (1), so, the extracting tool broke it into several small segments. This is not optimized, but works. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-31Add a tool for extracting xc3028 version 2.7 firmwareMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This tool allows the extraction of xc3028 v2.7 firmware from HVR 12x0 file. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-29tda18271: fail table lookups if frequency is out of rangeMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-28merge: http://linuxtv.org/hg/~mkrufky/cx23885Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-28merge: http://www.linuxtv.org/hg/~stoth/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-28merge: http://linuxtv.org/hg/~mkrufky/tda18271Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27merge: http://linuxtv.org/hg/~mkrufky/fixesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27Fix a few issues at the bttv conversionMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> bttv driver is working as previously. An additional gain of about 1,5Kb were obtained with the driver conversion to vidioc_ioctl2: text data bss dec hex filename 89208 40244 57556 187008 2da80 old/bttv.ko 88960 38740 57556 185256 2d3a8 new/bttv.ko (measured on a x86_64) Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27Preserve the previous order to make easier to check the conversionMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27Replace vidioc_ to bttv_Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Since there are a few vidioc_ functions that were exported, rename those functions to bttv_ in order to avoid poluting namespace. The other functions were also renamed, to standardize inside the driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27cx23885: update model matrix for Hauppauge HVR1500Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-27Converted bttv to use video_ioctl2Mauro Carvalho Chehab
From: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27cx23885: add missing subsystem IDs for Hauppauge HVR1500 RetailMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-27cx23885: update model matrix for Hauppauge HVR1250Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-09 17:26:28 +0000