summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-03-01Added make qconfig option to allow testing v4l/dvb menusMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> - make qconfig option were added. - This will generate a menu with v4l/dvb Kconfig menus at the beginning of the menus and the kernel menus at the end. Kernel menus shoudn't be touched. - .config is then generated after quiting. - Curently, .config is not used by Makefile proccess but it is a good candidate to be a replacement of Make.config file. With a good .config file, compilation should be faster. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-28FE6600 is a Thomson tunerMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - The tuner used in DViCO FusionHDTV DVB-T hybrid is made by Thomson - renamed tuner and dvb_pll structs accordingly Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-03-01Move DViCO hybrid initialisation data from stack.Chris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> The init_data array is never changed and need not be on the stack. Turn it into a static variable. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2006-02-28Kconfig: fix in-kernel build for cx88-dvb: zl10353 frontendMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - VIDEO_CX88_DVB_ALL_FRONTENDS should select DVB_ZL10353 - created VIDEO_CX88_DVB_ZL10353, for selective zl10353 support in cx88-dvb. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-28Use refactored LNBP21 and BSBE1 codeOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Use refactored LNBP21/BSBE1 code for Technotrend/Hauppauge DVB-S rev 2.3. As a side effect, FE_ENABLE_HIGH_LNB_VOLTAGE ioctl is supported now. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2006-02-28TechnoTrend S-1500 card handling moved from budget.c to budget-ci.cOliver Endriss
From: Perceval Anichini <perceval.anichini@streamvision.fr> TechnoTrend S-1500 card handling moved from budget.c to budget-ci.c. Signed-off-by: Perceval Anichini <perceval.anichini@streamvision.fr> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2006-02-28Refactored LNBP21 and BSBE1 supportOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Moved duplicated code to separate files. LNBP21 stuff rewritten from scratch, BSBE1 copied from av7110.c. Modified budget driver to use the new routines. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2006-02-28DViCO FusionHDTV DVB-T Hybrid and ZL10353-based FusionHDTV DVB-T Plus supportChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> Add support for the FE6600 tuner used on the DVB-T Hybrid board. Add support for the Zarlink ZL10353 DVB-T demodulator, which supersedes the MT352, used on the DViCO FusionHDTV DVB-T Hybrid and later model Plus boards. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2006-02-28Coding style fixes in saa7134-dvb.cHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> deleted 2 semicolons at end of functions Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-02-28Fixes for Lifeview Trio non fatal bugsHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> - Init message was sent to wrong slave address - Deleted outdated comment Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-02-27ELSA EX-VISION 500TV: fix incorrect PCI subsystem IDMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - ELSA EX-VISION 500TV was incorrectly programmed to have the same subsystem ID as ELSA EX-VISION 300TV, (1048:226b) - This changeset replaces the incorrect subsystem ID (1048:226b) with the correct one (1048:226a) for the ELSA EX-VISION 500TV. Thanks-to: TAMUKI Shoichi <tamuki@linet.gr.jp> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-27ELSA EX-VISION 700TV: fix incorrect PCI subsystem IDMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - Corrected autodetection for saa7130 card: subsystem: 1048:226c, board: ELSA EX-VISION 700TV Thanks-to: Gunther Mayer <gunther.mayer@gmx.net> Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-26Merge from v4l-dvb masterMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-02-26Merge hhackmann treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Also fixed a missing ; at the end of a function Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-26bttv: correct bttv_risc_packed buffer sizeMauro Carvalho Chehab
From: Duncan Sands <duncan.sands@math.u-psud.fr> This patch fixes the strange crashes I was seeing after using bttv card, caused by a buffer overflow in bttv_risc_packed. The instruction buffer size calculation contains two errors: (a) a non-zero padding value can push the start of the next bpl section to just before a page border, leading to more scanline splits and thus additional instructions. (b) the first DMA region can be smaller than one page, so there can be a scanline split even if bpl*lines is smaller than PAGE_SIZE. For example, consider the case where offset is 0, bpl is 2, padding is 4094, lines is smaller than 2048, the first DMA region has size 1 and all others have size PAGE_SIZE, assumed to equal 4096. Then all bpl regions cross page borders and the number of instructions written is 2*lines+2, rather than lines+2 (the current estimate). With this patch the number of instructions for this example is estimated to be 2*lines+3. Also, the BUG_ON that was supposed to catch buffer overflows contained a thinko causing it fire only if the buffer was overrun by a factor of 16 or more, so it fixes the the BUG_ON's (using sizeof rather than "4"). Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-26Log a message if a pvrusb2 I2C write is too largeMike Isely
From: Mike Isely <isely@pobox.com> The wire protocol to the PVR USB2 hardware limits the total size of an I2C write transfer (among other things). The driver detects this case and fails the transfer; this change also logs the message. We need this in order to catch V4L modules which might be attempting such transfers and deal with them on a case-by-case basis. Signed-off-by: Mike Isely <isely@pobox.com>
2006-02-26cx88: reduce excessive loggingMichael Krufky
From: Ian Pickworth <ian@pickworth.me.uk> - fix temporary debug code by changing printk to dprintk at level 1. - move CORE_IOCTL messages from level 1 to level 2. - this should help with selective debugging, while not filling people's logs up during normal use. Signed-off-by: Ian Pickworth <ian@pickworth.me.uk> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-26do a RESYNC for all cardsManu Abraham
From: Manu Abraham <manu@linuxtv.org> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2006-02-26Documentation updateManu Abraham
From: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2006-02-26fix module parametersManu Abraham
Thanks to Edgar Toerning Signed-off-by: Manu Abraham <manu@linuxtv.org>
2006-02-26fix broken IF-OUT Relay handlingManu Abraham
Thanks to Edgar Toernig Signed-off-by: Manu Abraham <manu@linuxtv.org>
2006-02-26Ignore DiSEqC messages > 6 and < 3Manu Abraham
Thanks to Edgar Toernig Signed-off-by: Manu Abraham <manu@linuxtv.org>
2006-02-26add pvrusb2 to local v4l-dvb buildMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - removed 'make pvrusb2' merge command - created in-kernel Makefile, Kconfig not yet done. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-26moved pvrusb2 driver into the kernel treeMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-26removed old cvs filesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-26add linux/Documentation/video4linux/README.pvrusb2Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - moved out of v4l_experimental Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-25Implement configurable initialization pause in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> This implements a module option which may be used to pause initialization of the driver right after the point where the hardware is reset. The idea here is to provide a means for the driver to stay out of the way until the hardware has finished initializating itself. The default delay is zero, which disables it (at the moment I don't think the delay is needed but it's worth leaving the logic in place to do it). Signed-off-by: Mike Isely <isely@pobox.com>
2006-02-25Change firmware file names in pvrusb2 to conform to v4l standardsMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-02-25fix build for older kernelsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - killed I2C_ALGO_BIT Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-25Merge from v4l-dvb masterMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-02-24Workaround to fix initialization for Nexus CAOliver Endriss
From: Marco Schluessler <marco@lordzodiac.de> Workaround for Nexus CA: Debi test fails unless first debi write is repeated. Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2006-02-24Merge from js treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> merge: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-24Merging hhackmann tree.Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> merge: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-24Merge mkrufky treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> merge: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-24Merge endriss treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> merge: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-24fix stv0297 for qam128 on tt c1500 (saa7146)Michael Krufky
From: Mattias Nordstrom <nordstrom@realnode.com> I have a TT C1500 card (saa7146, STV0297) which had problems tuning channels at QAM128 (like the ones in the Finnish HTV / Welho network). A fix which seems to work perfectly so far is to change the delay for QAM128 to the same values as for QAM256 in stv0297_set_frontend(), Signed-off-by: Mattias Nordstrom <nordstrom@realnode.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-24Add cpia2 camera supportMauro Carvalho Chehab
From: Alan Cox <alan@redhat.com> There has been a CPIA2 driver out of kernel for a long time and it has been pretty clean for some time too. This is an import of the sourceforge driver which has been stripped of - 2.4 back compatibility - 2.4 old style MJPEG ioctls A couple of functions have been made static and the docs have been repackaged into Documentation/video4linux. The rvmalloc/free functions now match the cpia driver again. Other than that this is the code as is. Tested on x86-64 with a QX5 microscope. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-23Support for Satelco EasyWatch DVB-S lightOliver Endriss
From: Thilo Berger <thilo_berger@gmx.net> Support for Satelco EasyWatch DVB-S light. Signed-off-by: Thilo Berger <thilo_berger@gmx.net> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2006-02-22Tweak pvrusb2's I2C adapter to work with cx25840Mike Isely
From: Mike Isely <isely@pobox.com> Modify the I2C adapter implementation in pvrusb2 such that I2C_FUNC_I2C is advertised to clients; this allows cx25840 to attach. Signed-off-by: Mike Isely <isely@pobox.com>
2006-02-22Implement LOG_STATUS in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Implement VIDIOC_LOG_STATUS ioctl() to the application. Implement generation of VIDIOC_LOG_STATUS to the modules. Implement trigger of VIDIOC_LOG_STATUS from sysfs when user cats a few key files, to help with debugging. Signed-off-by: Mike Isely <isely@pobox.com>
2006-02-22Handle eeproms in pvrusb2 with 16 bit addressesMike Isely
From: Mike Isely <isely@pobox.com> Newer PVR USB2 hardware uses a larger eeprom. These changes allow the driver to detect and handle the different eeprom. Signed-off-by: Mike Isely <isely@pobox.com>
2006-02-22Implement pvrusb2 driver function to discover eeprom addressMike Isely
From: Mike Isely <isely@pobox.com> The FX2 firmware in the PVR USB2 device can report the I2C address of the resident eeprom device. Implement code to retrieve this information. Signed-off-by: Mike Isely <isely@pobox.com>
2006-02-22Unexpand all the $Id$ keywords in pvrusb2.Mike Isely
From: Mike Isely <isely@pobox.com> The $Id$ keywords present in the pvrusb2 driver reflect information from the old SCM, useless here. For now, undo all the expansions. Signed-off-by: Mike Isely <isely@pobox.com>
2006-02-23Add DVB-T support for the LifeView DVB Trio PCI cardHartmut Hackmann
From: Nico Sabbi <nsabbi@tiscali.it> This patch adds DVB-T support, no DVB-S yet Signed-off-by: Nico Sabbi <nsabbi@tiscali.it> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-02-23Fixed Pinnacle 300i DVB-T support Hartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> - fixed tda9886 port 2 setting - turned remote control receiver off via saa7134 GPIO to avoid i2c hangs - modified tda9886 client calls to direct i2c access to allow proper return to analog mode - allow mode change to V4L2_TUNER_DIGITAL_TV in tuner VIDIOC_S_FREQUENCY client call Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-02-22Restore power on defaults of tda9887 after tda8290 probeHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> The probing code for tda8290 changes the state of the tda9887 GP ports. The patch assumes that if probing for tda8290 failed, this must be a tda9887 and restores its power on defaults. This should solve the module load order issue with some pinnacle cards. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-02-20set 'make ivtv-update' to depend on 'make ivtv' instead of 'make ivtv-checkout'Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This ensures that ivtv-svnversion.h and the ivtv symlinks are present, in case 'make clean' was run prior to 'make ivtv-update' Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-19TUV1236d: declare buffer as static constMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> On 2/17/06, Darren Salt <linux@youmustbejoking.demon.co.uk> wrote: > + u8 buffer [] = { 0x10,0x12,0x13,0x04,0x16,0x00,0x14,0x04,0x017,0x00 }; > Shouldn't buffer be declared static const? Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-19dvb-core: remove dead codeJohannes Stezenbach
From: Peter Beutner <p.beutner@gmx.net> The field "dvr" in struct dmxdev is competely unused. Remove it and code which allocates, initializes and frees it. Signed-off-by: Peter Beutner <p.beutner@gmx.net> Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
2006-02-19add AUDIO_GET_PTS and VIDEO_GET_PTS ioctlsMauro Carvalho Chehab
From: Andreas Oberritter <obi@linuxtv.org> Add two new ioctls to read the 33 bit presentation time stamp from audio and video devices as defined in ITU T-REC-H.222.0 and ISO/IEC 13818-1. Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Acked-by: Johannes Stezenbach <js@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 20:14:05 +0000