summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-03-11saa7134: small whitespace cleanupMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - matched indents on quotes within a printk Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-03-11Thomson FE6600: add missing "count" array elementMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - added missing "count" element in Thomson FE6600 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-03-11pvrusb2: remove "ifdef notdef"Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - Changed all occurances of "#ifdef notdef" to "#if 0" - This code will remain visible in the v4l-dvb repositories, but will be held back from git. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-03-11add pvrusb2 to MakefileMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - added pvrusb2 to the kernel Makefile Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-03-11Kconfig: Hauppauge WinTV-PVR USB2 supportMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - add pvrusb2 to the kernel build Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-03-11pvrusb2: video device register/unregister message conformityMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - device registration messages altered to conform with the other v4l drivers. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-03-11add colon to messages generated by pvr2_trace macroMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - Add a ':' after 'pvrusb2' for kernel message output. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-03-10Fix const inconsistency in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Clean up a missing const declaration in the initialization pathway of the pvrusb2 driver. Signed-off-by: Mike Isely <isely@pobox.com>
2006-03-10Raise legal maximum frequency to 850MHzMike Isely
From: Mike Isely <isely@pobox.com> The V4L2 control limit for frequency is too low. This change raises the limit to a more reasonable maximum. Signed-off-by: Mike Isely <isely@pobox.com>
2006-03-10Make pvrusb2 aware of alternative hardware typesMike Isely
From: Mike Isely <isely@pobox.com> Notice and track actual hardware type of device. This information is also used now to select the correct FX2 firmware file to load (because they can be different, unfortunately). Signed-off-by: Mike Isely <isely@pobox.com>
2006-03-10[PATCH] __user annotations of video_spu_paletteMauro Carvalho Chehab
From: Al Viro <viro@zeniv.linux.org.uk> This patch were applied at kernel on Wed Feb 1 07:33:44 2006 -0500 kernel-sync Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-10[PATCH] dvb NULL noise removalMauro Carvalho Chehab
From: Al Viro <viro@zeniv.linux.org.uk> This patch were applied at kernel on Wed Feb 1 06:02:50 2006 -0500 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-10V4L/DVB (3399a): cpia2/cpia2_v4l.c cleanupsMauro Carvalho Chehab
From: Adrian Bunk <bunk@stusta.de> - make 2 needlessly global functions static - remove cpia2_setup(): the driver already allows setting parameters through module_param(), and there's no reason for having two different ways for setting the same parameters kernel-sync Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-10Added no_overlay option and quirks to saa7134Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Some chipsets have several problems when pci to pci transfers are activated on overlay mode. the option no_overlay allows disabling such feature of the driver, in favor of keeping the system stable. The default is to use pcipci_fail flag defined on drivers/pci/quirks.c. It also allows the user to override it by forcing disable overlay or forcing enable. Forcing enable may generate PCI transfer corruption, including disk mass corruption, so should be used with care. Added a text description to this option and make messages looks the same at both bttv and saa7134 drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-10Optical cleanup for dmxdev.cMauro Carvalho Chehab
From: Andreas Oberritter <obi@linuxtv.org> Used Lindent, manually changed some line breaks. Removed invalid email addresses, useless casts and useless initialization of return values. Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-10Fix typo in enum name and use enum in struct dmxdev_filterMauro Carvalho Chehab
From: Andreas Oberritter <obi@linuxtv.org> Rename 'enum dmxdevype' to 'enum dmxdev_type' and use this enum instead of int for the member 'type' of struct dmxdev_filter. Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-10Remove 'dvbdev' from struct dmxdev_filterMauro Carvalho Chehab
From: Andreas Oberritter <obi@linuxtv.org> The member dvbdev gets initialized once but is never used after that. Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-10Remove 'pid' from struct dmxdev_filterMauro Carvalho Chehab
From: Andreas Oberritter <obi@linuxtv.org> The PID value is already stored in struct dmx_sct_filter_params which is a member of struct dmxdev_filter. Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Acked-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-10Some fixes and improvements at mailimportMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> hg mq were offering some troubles, because it seems to be also updated at master site. So, now, default is not to use it. Several validations added. Also improved output log by separating subject from from: line. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-10Allows go ahead when a patch is not applingMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-10Added better handling for errors at mailscriptMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Now, it checks if author have signed its own patch. Also, prints better error messages. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-10Merge from linuxtv repositoryMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> merge: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-10Now, Mailimport tests also v4l/dvb patch structureMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-10Corrected cardlist and whitespace cleanupMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Tenna tuner patch didn't updated Cardlist Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-10Corrects MODULE_AUTHORMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-10Creates a virtual video device driverMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> The Virtual Video Device Driver (aka vivi) is a device that can be used to: 1) test core v4l functionalities; 2) be a prototype for newer development. Vivi were developed using the best practices for v4l driver. When loaded, it provides a video device that generates a standard color bar, with a timestamp placed at top left corner. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-10Fixed some errors generated by previous commitMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-10Make video_buf more genericMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Video_buf were concerned to allow PCI devices to be used as video capture devices. This patch extends video_buf features by virtualizing pci-dependent functions and allowing other type of devices to use it. It is still DMA centric, although it may be used also by devices that emulates scatter/gather behavior or a DMA device Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-09Rename FX2 firmware for pvrusb2 (again)Mike Isely
From: Mike Isely <isely@pobox.com> It has been discovered that newer PVR USB2 needs incompatibly different FX2 firmware. The driver therefore needs to make the file name a function of which firmware flavor is required. This rename is part of that work. Signed-off-by: Mike Isely <isely@pobox.com>
2006-03-09Clears whitespaces before refreshing the patchMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This avoids introducing whitespaces by patches. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-09PATCH cx88-mpeg: cx8802_restart_queue() for blackbirdMauro Carvalho Chehab
Fixes "cx8802_restart_queue: queue is empty" storm in syslog =============================================================================== Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-09Correct gpio values for Aver 303 Studio in v4l-dvb treeMauro Carvalho Chehab
From: Marcin Rudowski <mar_rud@poczta.onet.pl> Old values generally works in A2 mono, but new ones allows: - detect and use Nicam stereo - mute in tv - use radio FM Signed-off-by: Marcin Rudowski <mar_rud@poczta.onet.pl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-09Updated CARDLIST.tuner with newer tenna stringMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Also Removed whitespaces introduced by previous tena patch Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-09Cx88 balance change errore messages - fixMauro Carvalho Chehab
There is an error in the cx88 code that causes this message in the syslog when balance is changed at full volume: Mar 4 18:35:08 ian2 kernel: cx88[0]: irq pci [0x1] vid* Mar 4 18:35:39 ian2 last message repeated 348 times Mar 4 18:36:01 ian2 last message repeated 564 times ... and so on The attached patch cures this problem. Signed-off-by: Ian Pickworth <ian@pickworth.me.uk> Signed-off-by: Marcin Rudowski <mar_rud@poczta.onet.pl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-09mailimport now accepts both kernel and v4l/dvb tree patchesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-09User annotations and fixesMauro Carvalho Chehab
* compat_alloc_user_space() returns __user pointer * copying between two userland areas is copy_in_user(), not copy_from_user() * dereferencing userland pointers is bad * so's get_user() from local variables ... plus usual __user annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-09Nskips maybe used uninitialized in bttv_risc_overlayMauro Carvalho Chehab
The Coverity checker (previously Stanford checker) noticed that the value of nskips could be read even if it was never written. Signed-off-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-09This patch fixes Tuner TNF5335 familyMauro Carvalho Chehab
Radio now works. Tuner now supports both PAL/D and STD/MN models Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-09imported patch tenna_xxx5.patchMauro Carvalho Chehab
2006-03-08Add mxb, dpc7146, hexium_orion and hexium_gemini to the MakefileMichael Hunold
From: Michael Hunold <hunold@linuxtv.org> Signed-off-by: Michael Hunold <hunold@linuxtv.org>
2006-03-08Add mxb, dpc7146, hexium_gemini and hexium_orion from 2.6.15Michael Hunold
From: Michael Hunold <hunold@linuxtv.org> Signed-off-by: Michael Hunold <hunold@linuxtv.org>
2006-03-08Fixed a small bug at hghead.plMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Commiter name were not preserved by mailimport at the way it was. Now, commiter name will be the HGUSER, and from: line will be included at commit message, preserving both commiter and patch authors. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-08Several updates at developer documentationMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Due to multiple trees, readme file becamed outdated. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-08Added a script to make easier to import patches sent by emailMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This script is capable to mass import patches on a mbox file, test for it, allow comment editing and applying it. This script requires: 1) git, since it uses gitimport to break a mbox into patches; 2) hg mailqueue. It is easier to manage patches using mq, allowing to work with the patches before applying to the tree. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-08Msp3400-kthreads.c: make 3 functions staticAdrian Bunk
This patch makes three needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-08Saa7134: document that there's also a 220RF from KWorldAdrian Bunk
I have the same card with the same PCI id, but from KWorld. The patch documents that this is the same card. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-08Typos grab bag of the monthOliver Endriss
From: Alexey Dobriyan <adobriyan@gmail.com> Typos grab bag of the month. Eyeballed by jmc@ in OpenBSD. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2006-03-04Implement new method in pvrusb2 to detect the FX2 firmwareMike Isely
From: Mike Isely <isely@pobox.com> The pvrusb2 driver as part of its initialization might have to load the FX2's firmware image. We must only do this when it is actually needed. The previous method just detected this requirement by noticing something unusual about the USB configuration of the device. Unfortunately with newer PVR USB2 devices this method no longer works. What we do now is also attempt a simple non-destructive endpoint 1 transaction; failure of that transfer will indicate a need to load the firmware. Signed-off-by: Mike Isely <isely@pobox.com>
2006-03-03Merge from pascoeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> merge: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-02Merging endriss treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> merge: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>