summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-10-30tuner: improve tuner_foo printk macros consistencyMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Alter the tuner_foo printk macros to indicate which module is generating the message. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-10-30tuner: prevent repeated "type set" message unless debug is enabledMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The tuner sub-module will usually log its type during its _attach() function, then tuner-core reports which type was attached when control is returned. In most cases, we expect to see the same message reported from both locations. We only need to see this second message if debug is enabled. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-10-30Remove EXPERIMENTAL from several i2c driversHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-10-30ivtv: add support for AVerMedia PVR-150 PlusHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-10-30ivtv: add ASUS Falcon2 supportHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-10-30i2c-id: add M52790 driver IDHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-10-30m52790: add new Mitsubishi A/V switch i2c driverHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> This driver is used by the ASUS Falcon2 cx23416-based cards. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-10-30ivtv: fix compile warningHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-10-30merge: http://linuxtv.org/hg/~dougsland/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-29 bttv: uses input functions, should depend on INPUTMauro Carvalho Chehab
From: Randy Dunlap <randy.dunlap@oracle.com> Several media drivers use input_(*) functions so they need to depend on the INPUT config symbol. drivers/built-in.o: In function `bttv_input_fini': linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:346: undefined reference to `input_unregister_device' drivers/built-in.o: In function `bttv_input_init': linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:204: undefined reference to `input_allocate_device' linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:335: undefined reference to `input_free_device' linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:321: undefined reference to `input_register_device' linux-2.6.24-rc1-git4/drivers/media/video/bt8xx/bttv-input.c:335: undefined reference to `input_free_device' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-29 use input functions, should depend on INPUTMauro Carvalho Chehab
From: Randy Dunlap <randy.dunlap@oracle.com> All of these drivers select VIDEO_IR, which uses the input subsystem, so they should also depend on INPUT. Problem examples: drivers/built-in.o: In function `ir_input_key_event': ir-functions.c:(.text+0x10849a): undefined reference to `input_event' ir-functions.c:(.text+0x1084ac): undefined reference to `input_event' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc0a): undefined reference to `get_key_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc4f): undefined reference to `get_key_pinnacle_grey' drivers/built-in.o: In function `saa7134_input_fini': (.text+0x11cd8b): undefined reference to `input_unregister_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d1fa): undefined reference to `input_allocate_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d317): undefined reference to `input_register_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d6ca): undefined reference to `input_free_device' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c3f3): undefined reference to `ir_codes_hauppauge_new' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c450): undefined reference to `ir_codes_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c480): undefined reference to `ir_codes_purpletv' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c495): undefined reference to `ir_codes_pinnacle_grey' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c622): undefined reference to `ir_rc5_timer_end' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c637): undefined reference to `ir_rc5_timer_keyup' drivers/built-in.o: In function `build_key': saa7134-input.c:(.text+0x11c769): undefined reference to `ir_extract_bits' saa7134-input.c:(.text+0x11c7ad): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f0): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f9): undefined reference to `ir_input_nokey' saa7134-input.c:(.text+0x11c806): undefined reference to `ir_input_nokey' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ca07): undefined reference to `ir_codes_encore_enltv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11caf6): undefined reference to `ir_input_init' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cbf2): undefined reference to `ir_codes_avermedia' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc24): undefined reference to `ir_codes_pctv_sedna' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc53): undefined reference to `ir_codes_flydvb' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc85): undefined reference to `ir_codes_videomate_tv_pvr' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ccb7): undefined reference to `ir_codes_pixelview' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cce9): undefined reference to `ir_codes_eztv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cd1b): undefined reference to `ir_codes_manli' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cda8): undefined reference to `ir_codes_cinergy' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cdd7): undefined reference to `ir_codes_flyvideo' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce06): undefined reference to `ir_codes_asus_pc39' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce7d): undefined reference to `ir_codes_gotview7135' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cee1): undefined reference to `ir_codes_proteus_2309' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-29 ir-functions use input functions, should depend on INPUTMauro Carvalho Chehab
From: Randy Dunlap <randy.dunlap@oracle.com> Media ir-functions uses input_(*) functions so it should depend on the INPUT config symbol. drivers/built-in.o: In function `ir_input_key_event': ir-functions.c:(.text+0x10849a): undefined reference to `input_event' ir-functions.c:(.text+0x1084ac): undefined reference to `input_event' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-30Properly fill MODULE_AUTHORMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Most of the driver were written by Mauro Carvalho Chehab. DTV parts were added by Michel Ludwig. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-30Add support for analog tv on HVR-950Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This patch adds USB ID for HVR-950. It also adds the callback for handling firmware loading. Thanks to Markus Reichberger for the reset commands. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-29Fix some troubles at list handlingMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> - priv->count were wrong. Should be incremented since the first usage; - forgot to use list_del() to remove the driver; - Release memory if an error occurs during _attach Thanks to Aidan Thornton <makosoft@googlemail.com> for pointing this. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-29Add support for tuner-xc2028Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/video/em28xx/em28xx-cards.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
2007-10-29Prevents double tuner registeringMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/video/tuner-core.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
2007-10-29Re-inserts xc2028 attach code, fixing its parametersMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> I2C bus redesign changed i2c parameters. This patch re-adds tuner xc2028 attach function, replacing the parameters to the newer syntax. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/video/tuner-core.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
2007-10-29ivtv-streams: make file_operations constDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@gmail.com> ivtv-streams: make file_operations const Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
2007-10-29zr364: make file_operations constDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@gmail.com> zr364: make file_operations const Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
2007-10-28radio-gemtek: make file_operations constDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@gmail.com> make file_operations const Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
2007-10-28pvrusb2: Remove dead sysfs codeMike Isely
From: Mike Isely <isely@pobox.com> The pvrusb2 driver's sysfs implementation had long since implemented a dummy hotplug function because at the time the kernel would oops without at least the empty function being present. Today - after numerous class interface changes in the kernel - this pvrusb2 change had been dutifully carried forward but an inspection of the kernel sources shows that it is no longer needed. So remove the dummy function and its reference. This also solves a recurring backwards compatibility issue in the pvrusb2 driver as the class interface has been getting thrashed in the kernel. Signed-off-by: Mike Isely <isely@pobox.com>
2007-10-28pvrusb2: Fix associativity logic errorMike Isely
From: Roel Kluin <12o3l@tiscali.nl> if(!x & y) should either be if(!(x & y)) or if(!x && y) I made changes as seemed appropriate, but please review this is against current git. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Mike Isely <isely@pobox.com>
2007-10-26 saa7134: fix analog audio in on medion md8800 quadroMauro Carvalho Chehab
From: hermann pitton <hermann-pitton@arcor.de> saa7134: fix analog audio in on medion md8800 quadro, aka CTX944 Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-26merge: http://linuxtv.org/hg/~mkrufky/dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-26merge: http://linuxtv.org/hg/~tmerle/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-24usbvision: Convert the usbvision->lock semaphore to the mutex APIThierry MERLE
From: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Convert the usbvision->lock semaphore to the mutex API Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Reviewed-by: Thierry MERLE <thierry.merle@free.fr>
2007-10-24 saa7134/: make 2 functions staticMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> saa7134_buffer_requeue() and set_tvnorm() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-26merge: http://linuxtv.org/hg/~hverkuil/v4l-dvb-fixesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-23 cafe_ccic: Add a pointer to the data sheetMauro Carvalho Chehab
From: Jonathan Corbet <corbet@lwn.net> Add a pointer to the (recently posted) Cafe data sheet. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-23 Fix a cafe_ccic resume bugMauro Carvalho Chehab
From: Jonathan Corbet <corbet@lwn.net> If the system is suspended while the camera is streaming, it will not continue streaming on resume. Save the state properly so that resume works. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-26merge: http://linuxtv.org/hg/~tap/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-26Updates missing entries at CARDLIST.em28xxMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-26Make em28xx.pl script more generic to identify other em28xx chipsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-23Fix radio entry for MSI @nyware masterMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Thanks to Serge Kolotylo for his help Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22bttv: Update initial image size when set via V4L1 VIDIOCMCAPTURETrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The V4L1 spec says that the image size should be with with VIDIOCSWIN before requesting buffers with VIDIOCGMBUF and capturing into them with VIDIOCMCAPTURE. But it seems that many apps don't do this. They set the size using the fields in the VIDIOCMCAPTURE ioctl. The driver doesn't know what size to capture until it actually starts to capture. In particular, it doesn't know what size to capture until it has already mmap the captured buffers. Which is quite stupid. Why V4L1 has size and format fields for VIDIOCMCAPTURE I have no idea. Many drivers don't support this, including those using v4l1-compat. The bttv does, which is probably the only reason such broken software is so prevalent. But, the driver doesn't adjust its idea of what size is being captured when it is set this way. If you try to query the driver's current setting with v4l2-ctl, it won't be correct. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-10-22bttv: SPICT ioctl doesn't work with vlcTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The bttv driver instists that the depth specified in the call to VIDIOCSPICT match the pixel format specified in the same call. vlc doesn't set the depth field, which makes the SPICT ioctl always fail. The V4L1 standard is not clear on how most operation are supposed to work, and this is no exception. The depth field would appear to be entirely redundant, as the pixel format specifies a specific depth. It could be that this field was only meant for output from the *G*PICT ioctl and should be ignored in *S*PICT. This is in fact what the v4l1-compat wrapper does. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-10-20v4l2-ctl: fix minor inconsistency regarding INTEGER64 handling.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-10-19v4l2-ctl: fix --get-sliced-vbi(-out)-cap.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Wrong buffer type was set, causing EINVAL to be returned. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-10-19Add support for changing TEA5767_PLLREF_ENABLE via configMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-19From: Mauro Carvalho Chehab <mchehab@infradead.org>Mauro Carvalho Chehab
Add preliminary support for radio on CX88_BOARD_MSI_TVANYWHERE_MASTER Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-18Adds the capability of configuring tea5767 supportMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> tea5767 has several possible configurations. Before the patch, the driver were assuming the more common configuration. However, some newer cards, like MSI @nyware Master requires other configurations, like de-activating a gpio port and changing chip Xtal. This patch adds the capability of altering device configuration at runtime. This may also be used later to activate some features like auto-mute when signal is weak. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-18Replace TDA9887_SET_CONFIG by TUNER_SET_CONFIGMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Currently, the only tuner-specific device that allows special configurations is tda9887. However, tea5767 also may require some special configurations (for example, to specify a different Xtal freq). This patch replaces TDA9887_SET_CONFIG by a more generic internal ioctl (TUNER_SET_CONFIG). The newer one allows specifying what tuner is appliable to a configuration set, and allows an arbitrary configuration struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-18Fix compilation for distro kernels with newer -ALSA treesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-18saa7134: fix NULL dereference at suspend time for cards without IR receiverMauro Carvalho Chehab
Calling saa7134_ir_stop at suspend is no good idea for saa7134 cards without remote control. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-18merge: http://www.linuxtv.org/hg/~hverkuil/ivtv-compatMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-18 patch which improves GotView Saa7135 remote controlMauro Carvalho Chehab
From: Pedro <roginovicci@nm.ru> improve GoTView PCI7135 remote control working under linux. Acked-by: Hermann Pitton <hermann-pitton@arcor.de> Acked-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Eugene M. Roginskii <roginovicci@nm.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-17ivtvfb: Removal of the 'osd_compat' module option.Hans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> Due to changes in the core ivtv driver as of release 1.0, the osd_compat module option has been rendered obsolete. This patch removes the option and all code associated with it. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-10-11DiB0700-device: Using 1.10 firmwarePatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> As for most of the users the 1.10 firmware is an improvement we should use this firmware always now. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2007-10-17Avoid multiple line comments to be messedMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-09 18:29:47 +0000