summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-03-15tuner: rename TUNER_PHILIPS_ATSC to TUNER_PHILIPS_FCV1236DMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> TUNER_PHILIPS_ATSC is an ambiguous name for a tuner. Rename it to TUNER_PHILIPS_FCV1236D to be more descriptive. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-15tuner-simple: warn if tuner can't be probed during attachMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-15tuner: prevent instance sharing if i2c adapter is NULLMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> We currently do not have a method to enable instance staring if i2c adapter is NULL, in the cases of dvb demods that write to the tuner directly using calc_regs. Prevent possible wrong instance sharing for these cases until a better solution can be found. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-10merge: http://linuxtv.org/hg/~mkrufky/tunerMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-10merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-09tuner-simple: fix return value of simple_dvb_configureMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> simple_dvb_configure returns the actual tuned frequency to its caller, so it must be declared as a u32 rather than an int. As a result, we will return 0 to indicate a failure. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-09cx25840: better PAL-M and NTSC-KR handlingHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-03-09msp3400: fix SECAM D/K handlingHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The 6.5 MHz carrier was interpreted as SECAM-L even if SECAM-D/K was selected. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-03-09saa7115: fix PAL-Nc handlingHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Fsc 3.58 refers to Combination PAL-N (aka PAL-Nc), not to plain PAL-N (that uses Fsc 4.43). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-03-09ivtv: rename tunerhz to tunertypeHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> There are two tuner types: those for M/N standards and those for all others. However, M/N standards are not always 60 Hz (PAL-N/Nc are 50 Hz), so rename the module option accordingly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-03-09ivtv: fix tunerhz bug: PAL-N(c) is 50 Hz, not 60.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-03-08ivtv: add support for Japanese variant of the Adaptec AVC-2410.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-03-08ivtv: improve pal/secam module options, add tunerhz module optionHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Allow options like pal=bgh, improve description of those options. Add tunerhz option: 50=card has 50Hz tuner, 60=card has 60Hz tuner. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-03-07 soc-camera: streamline hardware parameter negotiationMauro Carvalho Chehab
From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Improve hardware parameter negotiation between the camera host driver and camera drivers. Parameters like horizontal and vertical synchronisation, pixel clock polarity shall be set depending on capabilities of the parties. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-10usb-video: checkpatch fixesMauro Carvalho Chehab
From: Andrew Morton <akpm@linux-foundation.org> Please run checkpatch prior to sending patches Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-07 usb video: add a device link to usbvideo devices, else hal will ignore themMauro Carvalho Chehab
From: Pascal Terjan <pterjan@mandriva.com> Signed-off-by: Pascal Terjan <pterjan@mandriva.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-10Better proccess -mm patchesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-10ir-kbd-i2c: Minor optimization in ir_probeMauro Carvalho Chehab
From: Jean Delvare <khali@linux-fr.org> This saves an initialization and a comparison. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-08Fix em2800 altsetting selection.Mauro Carvalho Chehab
From: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-06ivtv: fix polling bugHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The q_io queue was never taken into account by the poll function. Thanks to Andy Walls for finding this bug. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-03-05 V4L1 - fix v4l_compat_translate_ioctl possible NULL derefMauro Carvalho Chehab
From: Cyrill Gorcunov <gorcunov@gmail.com> There are possible NULL pointer derefs in case of kzalloc fails so fix them. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-05 add flag to allow software demux to recognize the output typeMauro Carvalho Chehab
From: Andreas Oberritter <obi@linuxtv.org> Previously, the macro DVR_FEED, which is used to recognize and filter out duplicate packets going to the DVR device, used the TS_PAYLOAD_ONLY flag to identify a packet's destination. This kind of filtering was introduced by the following two changesets: Now, that it is possible to record TS PIDs using the demux device by setting the output type to DMX_OUT_TSDEMUX_TAP, checking TS_PAYLOAD_ONLY is not sufficient anymore. Therefore another flag, TS_DEMUX, is added to specify the output type of a feed. This allows multiple clients to filter the same TS PID on a demux device simultaneously. Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-27 usb/opera1.c: fix a memory leakMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch fixes a memory leak in the "testval == 0x67" case spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-07cx88: Fix memset for tuner-xc3028 controlMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Fix a cut-and-paste error Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-06Fix bad whitespacesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-06cx88-dvb: fix an OOPS for xc3028 devices, when dvb_attach failsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> If dvb_attach fails, dev->dvb.frontend is NULL. This will produce an OOPS, as reported. Thanks to Vanessa Ezekowitz <vanessaezekowitz@gmail.com> CC: Vanessa Ezekowitz <vanessaezekowitz@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-04merge: http://linuxtv.org/hg/~mcisely/pvrusb2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-01: tuner and radio addresses are missing for the PixelView PlayTV cardMauro Carvalho Chehab
From: Wojciech Migda <wojtek.golf@interia.pl> The PixelView PlayTV card definition structure was missing initialization of the tuner_addr and radio_addr fields. As a result it was impossible to have the tuner initialized using parameters specified while loading the bttv.ko module. This regression became visible after the v4l rearrangements introduced somewhere around 2.6.15 kernel version. The root cause for the tuner initialization failure is located in the attach_inform function in the bttv-i2c.c file. There at the very beginning the addr variable holding the tuner device address is initialized with the value taken from the bttv_tvcards array. For the PixelView PlayTV card the tuner address field (and the radio address as well) was uninitialized, and thus equal 0. Later in that function execution of the TUNER_SET_TYPE_ADDR tuner command is guarded with check for the tuner address either equal ADDR_UNSET, or client->addr. Since both are non-zero (the latter in case of the card owned by me at the runtime is equal 0x61) the TUNER_SET_TYPE_ADDR command is not executed, and consequently in the tuner_attach function in the tuner-core.c file call to i2c_attach_client does not result in assigning the tuner type variable with the requested value. Providing initialization of the tuner_addr and radio_addr with ADDR_UNSET values as it is already done for other tv cards defined in bttv-cards.c ensures that the tuner initialization is done correctly, just as it used to be in the 2.6.14 kernel. Signed-off-by: Wojciech Migda <wojtek.golf@interia.pl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-28 DMX_OUT_TSDEMUX_TAP: record two streams from same mux, resendMauro Carvalho Chehab
From: Peter Hartley <pdh@utter.chaos.org.uk> Currently (in linux-2.6.24, but linux-dvb hg looks similar), the dmx_output_t in the dmx_pes_filter_params decides two things: whether output is sent to demux0 or dvr0 (in dmxdev.c:dvb_dmxdev_ts_callback), *and* whether to depacketise TS (in dmxdev.c:dvb_dmxdev_filter_start). As it stands, those two things can't be set independently: output destined for demux0 is depacketised, output for dvr0 isn't. This is what you want for capturing multiple audio streams from the same multiplex simultaneously: open demux0 several times and send depacketised output there. And capturing a single video stream is fine not what you want: you want multi-open (so demux0, not dvr0), but you want the TS nature preserved (because that's what you want on output, as you're going to re-multiplex it with the audio). At least one existing solution -- GStreamer -- sends all its streams simultaneously via dvr0 and demuxes again in userland, but it seems a bit of a shame to pick out all the PIDs in kernel, stick them back together in kernel, and send them to userland only to get unpicked again, when the alternative is such a small API addition. The attached patch adds a new value for dmx_output_t: DMX_OUT_TSDEMUX_TAP, which sends TS to the demux0 device. With this patch and a dvb-usb-dib0700 (and UK Freeview from Sandy Heath), I can successfully capture an audio/video PID pair into a TS file that mplayer can play back. Signed-off-by: Peter Hartley <pdh@utter.chaos.org.uk> Acked-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-04Subject: Add a missing include at v4l2_driver.hMauro Carvalho Chehab
From: Carl Karsten <carl@personnelware.com> Date: Thu, 28 Feb 2008 15:21:51 -0600 Adding #include <stddef.h> solves a build problem I had on Ubnutu. v4l-dvb/v4l2-apps/test$ make CC driver-test.o In file included from driver-test.c:17: ../lib/v4l2_driver.h:26: error: expected specifier-qualifier-list before 'size_t' make: *** [driver-test.o] Error 1 Thanks to Carl Karsten <carl@personnelware.com> for pointing this issue. CC: Carl Karsten <carl@personnelware.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-04em28xx: correct use of and fixMauro Carvalho Chehab
From: Andrew Morton <akpm@linux-foundation.org> be less silly while we're there. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-04merge: http://linuxtv.org/hg/~mkrufky/fusionhdtv7Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-26ivtv: Add missing sg_init_table()Hans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> If a dma transfer is attempted for either yuv or framebuffer output, a missing sg_init_table() call causes a kernel BUG in scatterlist.h if CONFIG_DEBUG_SG is set. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-02-25cx88: enable IR receiver and real time clock on FusionHDTV7 GoldMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-02-25cx88: fix GPIO for FusionHDTV 7 Gold input selectionMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Fix GPIO for FusionHDTV 7 Gold tv / s-video / composite input selection. Fix card textual name to match other FusionHDTV device names. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-02-25cx88: add analog support for DVICO FusionHDTV7 GoldMichael Krufky
From: Steven Toth <stoth@hauppauge.com> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-02-25limit stack usage of ir-kbd-i2c.cMauro Carvalho Chehab
From: Marcin Slusarz <marcin.slusarz@gmail.com> ir_probe allocated struct i2c_client on stack; it's pretty big structure, so allocate it with kzalloc make checkstack output without this patch: x059d ir_probe [ir-kbd-i2c]: 1000 Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-26 em28xx: Correct use of ! and &Mauro Carvalho Chehab
From: Julia Lawall <julia@diku.dk> In commit e6bafba5b4765a5a252f1b8d31cbf6d2459da337, a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. This is not tested and clearly changes the semantics, so it is only something to consider. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E1,E2; @@ ( !E1 & !E2 | - !E1 & E2 + !(E1 & E2) ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-27merge: http://linuxtv.org/hg/~dougsland/v4l-dma/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-27merge: http://ifup.org/hg/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-27merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-26v4l: Deadlock in videobuf-core for DQBUF waiting on QBUFBrandon Philips
Avoid a deadlock where DQBUF is holding the vb_lock while waiting on a QBUF which also needs the vb_lock. Reported by Hans Verkuil <hverkuil@xs4all.nl>. From: Brandon Philips <brandon@ifup.org> Signed-off-by: Brandon Philips <bphilips@suse.de>
2008-02-27videobuf-dma-sg: Remove unused variableDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@gmail.com> Removed warning message: - videobuf-dma-sg.c: In function 'videobuf_dma_unmap': - videobuf-dma-sg.c:281: warning: unused variable 'dev' Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
2008-02-27 bttv: Re-enable radio tuner support for VIDIOCGFREQ/VIDIOCSFREQ ioctls.Mauro Carvalho Chehab
From: Robert Fitzsimons <robfitz@273k.net> Signed-off-by: Robert Fitzsimons <robfitz@273k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-27 bttv: Re-enabling radio support requires the use of struct bttv_fh.Mauro Carvalho Chehab
From: Robert Fitzsimons <robfitz@273k.net> A number of the radio tuner ioctl functions are shared with the TV tuner, these functions require a struct bttv_fh data structure to be allocated and initialized. Signed-off-by: Robert Fitzsimons <robfitz@273k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-25 soc-camera: deactivate cameras when not usedMauro Carvalho Chehab
From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Only attach cameras to the host interface for probing, then detach until open. This allows platforms with several cameras on an interface, physically supporting only one camera, to handle multiple cameras and activate them selectively after initial probing. The first attach during probe is needed to activate the host interface to be able to physically communicate with cameras. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-25 fix integer as NULL pointer warning in mt20xx.cMauro Carvalho Chehab
From: Harvey Harrison <harvey.harrison@gmail.com> drivers/media/video/mt20xx.c:650:10: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-25 dabusb: fix shadowed variable warning in dabusb.cMauro Carvalho Chehab
From: Harvey Harrison <harvey.harrison@gmail.com> drivers/media/video/dabusb.c:208:6: warning: symbol 'buffers' shadows an earlier one drivers/media/video/dabusb.c:63:12: originally declared here Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-25cx88-cards: Fix powerangel gpio1Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> With this gpio, audio works properly. Thanks to Daniel Fraga <fragabr@gmail.com> for helping on fixing the code for Powerangel Real board. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-25cx88-dvb: Renames pci_nano callbackMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This callback is specific to pci_nano, since supports only dvb. Renames it to avoid future mistakes. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-09 14:33:40 +0000