Age | Commit message (Collapse) | Author |
|
Add support for the USB portion of the DViCO Dual Digital board.
Patch correct "warm" USB IDs into bluebird firmware before download.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
|
|
From: Peter Missel <peter.missel@onlinehome.de>
saa7134-core.c saa7134_irq(): Separate GPIO16 and GPIO18 handling. Call
IR-remote-GPIO handler only if the GPIO IRQ is "owned" by it. Added
infrastructure to branch out to a future I2C-IR IRQ handler.
saa7134-core.c saa7134_hwinit2(): Enable only the one GPIO pin and edge to
trigger an IRQ that is wired as keyup/keydown mask. IRQ will only be
generated for an actual key-down event.
saa7134-input.c flyvideo_codes[]: Replace numpad keys with normal ones. Put
meaning to mystery keys. Change some key definitions to have their functions
match their labels better. Fix typos.
saa7134-input.c flydvb_codes[]: Added new table for the larger remote that
comes with the LifeView FlyDVB series.
saa7134-input.c build_key(): In IRQ mode, signal key-down and then key-up
straight in one go.
Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
|
|
- some fixes from the previous patches
- printk replaced by v4l_ print macros on saa6752 and bt832
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- Latest patch reverted, since __stringfy seems to be needed for
kernel < 2.6.15
- Applied kernel I2C cleanups from Jean Delaware.
- driver names simplified to allow usage of newer printk macros
at v4l2-common.h
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- removed unneeded __stringify
- updated i2c-id.h
- kernel-sync
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
kernel-sync.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
From: Greg Kroah-Hartman <gregkh@suse.de>
It is no longer needed, so let's remove it, saving a bit of memory.
kernel-sync
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
From: George Gazurkoff <gazurkoff@gmail.com>
- Both AverTV Studio 303 cards, #6 and #36,
use the same remote control programming.
Signed-off-by: George Gazurkoff <gazurkoff@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
Add cx88-alsa to the load/unload list
Signed-off-by:
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
installation for some modules was being trashed in the Makefile
Signed-off-by:
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
VIDEO_ALSA now actually means "enable ALSA modules". Both cx88 and saa7134
are covered by it (bt87x is disabled as it may conflict with snd_bt87x in
ALSA's tree), and it now defaults to "y".
Signed-off-by:
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
Existing audio DMA uses conflict with cx88-alsa. This workaround disables
that code if cx88-alsa is being compiled
Signed-off-by:
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
Fixed double-spinlock bug
Signed-off-by:
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
Cleaned up some code and excessive debug left behind during development
Signed-off-by:
|
|
- There is a bug in the ioctl translations from 32bit userspace
to 64bit kernelspace in do_set_window().
- The video window (vw) should be passed to native_ioctl()
instead of the video clip.
Signed-off-by: Guy Martin <gmsoft@tuxicoman.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
From: Peter Missel <peter.missel@onlinehome.de>
- Add support for LifeView FlyDVB Trio.
- all analog inputs are supported and working, including FM radio
- TO DO: dvb & remote control
Signed-off-by: Peter Missel <peter.missel@onlinehome.de>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
From: Manenti Marco <marco_manenti@colman.it>
* linux/Documentation/video4linux/CARDLIST.cx88:
* linux/drivers/media/video/cx88/cx88-cards.c:
* linux/drivers/media/video/cx88/cx88-dvb.c: (dvb_register):
* linux/drivers/media/video/cx88/cx88.h:
Add Kworld/Vstream Xpert DVB-T card with cx22702 tuner.
Signed-off-by: Manenti Marco <marco_manenti@colman.it>
Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru>
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
The audio distortion was apparently being caused by the high amount of
interrupts being generated. Increasing the buffer from 512 to 4096 seems
to fix it
Signed-off-by:
|
|
Fix signed/unsigned bug in brightness handling (set to 0 and 128 was returned).
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Fix signed/unsigned bug in hue handling (set to -127 and 129 was returned).
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
kernel-sync
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
It's still not perfect (lots of over and underruns), but there's now working
audio.
Dropped the videobuf queues (too geared for video...) in favor of a single
RISC databuffer, and changed the remaining code accordingly. And it works ;)
Signed-off-by:
|
|
- Add DViCO Bluebird firmware to dvb_get_firmware script,
for FusionHDTV USB devices.
- Use usb alt setting 0 for EP4 transfer (dvb-t),
- Use usb alt setting 7 for EP2 transfer (atsc)
- Added comment to lgdt330x.c to indicate support for
DViCO FusionHDTV5 USB Gold.
Thanks to: Jeff Lee <JeffLee@dvico.com>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
- This property set is for the LG-H064F (FusionHDTV5 USB Gold)
- There may, in the future, be a bluebird device using a different NIM,
so renaming the struct to somehting NIM-specific is appropriate.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
Improved recovery from ARM crash and the way a crash is detected.
Minor white space clean-up, debug output fixed.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
|
|
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
- Added VIDIOC_QUERYCTRL
- Removed unnecessary inlines.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
- convert diagnostics over to the new v4l2-common.h macros.
- deprecated tuner_debug option, the new option is debug.
- renamed cx25840_debug to debug.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- Added new v4l_err, v4l_warn, v4l_info and v4l_dbg macros to
v4l2-common.h for use in v4l-dvb i2c drivers. This ensures
a unique prefix for each device instance.
- At a later stage these macros may be reimplemented using the
device-generic macros from device.h.
- Converted the msp3400 driver to the new macros.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
- Split msp3400.c into msp3400-driver.c and msp3400-kthreads.c.
- Removed experimental DFPREG ioctls. If this is really needed one
day then it should be implemented using VIDIOC_G/S_REGISTER.
- Added missing BALANCE control info for VIDIOC_QUERYCTRL.
- Still more cleanup, clarified some kernel messages.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
- Add space after , in memcpy()
- Initialize bpll array before memcpy() to pll_init.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
Continue cleanup effort:
- more cosmetic changes
- combine volume, balance, bass and treble into one audio
function. Revert old 2.4 code that crept in.
- print internal ioctls using new debug function.
- marked all msp3400c (aka manual) functions as such.
- removed some unused data structures.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
- Added a test area to CVS.
- Included a small dumb app to test all ioctls.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
From: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
- Now, all internal ioctls are at v4l2-common.h
- removed unused ioctl at saa6752hs.h
- all debug ioctl code moved to v4l2-common.c
- removed duplicated stuff from other cards
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- Now using firmware "dvb-usb-bluebird-01.fw",
with combined support for atsc and dvb-t Bluebird models.
- Use usb alt setting 0 for EP4 transfer (dvb-t),
- Use usb alt setting 7 for EP2 transfer (atsc) */
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
From: Michael Krufky <mkrufky@m1k.net>
- Adds Bluebird ATSC support to the cxusb driver,
using dvb-usb-bluebird-atsc-01.fw firmware.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
- Added cx23415/6 firmware documentation from the ivtv project.
- Added header containing the firmware API commands for use
by all projects that use the cx2341x. First step towards a
shared cx2341x driver.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Step 1 of the msp3400.c cleanup.
Most changes are all cosmetic (moved code around, renamed functions
and variables).
New additions:
- VIDIOC_LOG_STATUS for debugging.
- More user friendly messages on driver load.
- 'simple' renamed to 'autodetect'
- 'simpler' renamed to 'autoselect'
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|