summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-02-14Adds V4L/DVB linux-next to README.patchesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-14merge: http://linuxtv.org/hg/~dougsland/v4l-radio/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-14 tuner-xc2028 depends on FW_LOADER.Mauro Carvalho Chehab
From: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-14radio-si470x: Add kernel validation to work queueDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@gmail.com> Added kernel validation to support work_struct/delayed_work. (kernel < 2.6.20) Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
2008-02-13radio-si470x: Add kernel validation to mutexDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@gmail.com> Added kernel validation to support mutex/semaphore. (kernel < 2.6.16) Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
2008-02-13 remove V4L2_CID_SHARPNESS from meye.h and report private control as DISABLEDMauro Carvalho Chehab
From: Brandon Philips <brandon@ifup.org> - Continue to support the V4L2_CID_PRIVATE_BASE + 1 control in the ABI - Report the same control as V4L2_CID_SHARPNESS - Report the private control disabled via QUERYCTRL Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-14Add a missing kernel include at the building systemMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-14merge: http://linuxtv.org/hg/~rmcc/blackbird/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-13Fix FM firmware loadingMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> There's no need to load SCode table for FM. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-13cx88-mpeg: Fix race condition in variable accessRicardo Cerqueira
From: Ricardo Cerqueira <v4l@cerqueira.org> There was a possible race condition in the increment/decrement of the active device references counter. Thanks to Trent Piepho (xyzzy@speakeasy.org) for bringing it up. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
2008-02-13Fix compat code to work with 2.6.24Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-13V4L, include ioctl.h in videodev headersMauro Carvalho Chehab
From: Jiri Slaby <jirislaby@gmail.com> Fix compilation of user processes which includes videodev*.h but not includes linux/ioctl.h: v4l2ext_helper.c: In function 'process_ioctl': v4l2ext_helper.c:183: warning: implicit declaration of function '_IOWR' v4l2ext_helper.c:183: error: expected expression before 'struct' v4l2ext_helper.c:183: error: case label does not reduce to an integer constant Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-13 bttv: Fix overlay divide error.Mauro Carvalho Chehab
From: Robert Fitzsimons <robfitz@273k.net> The initial work to convert the bttv driver to V4L2 "Partial conversion from V4L1 to V4L2" (e84619b17440ccca4e4db7583d126c4189b987e5), missed the line which set the appropriate overlay crop structure in the newly allocated bttv_buffer. This then causes a divide error in the bttv_calc_geo function. Signed-off-by: Robert Fitzsimons <robfitz@273k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-11 Lift videobuf-dma-sg's PCI dependency, until it is fixedMauro Carvalho Chehab
From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> videobuf-dma-sg.c should be converted to the generic DMA API to make it also useful for non-PCI configurations. Even now it can be used thanks to compatibility macros in include/asm-generic/pci-dma-compat.h. This has been verified to work on PXA270 CPU with the pxa_camera.c soc-camera driver. For this the following temporary work-around is needed. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-12 xc5000: fix build error when built as moduleMauro Carvalho Chehab
From: Tony Breeds <tony@bakeyournoodle.com> drivers/built-in.o: In function `set_type': tuner-core.c:(.text+0x8879d): undefined reference to `xc5000_attach' Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-11cx88-mpeg: Allow concurrent access to cx88-mpeg devicesMauro Carvalho Chehab
From: Roland Stoll <roland@xindex.de> It currently isn't possible to open the frontend device of cx88-mpeg devices (DVB or Blackbird) multiple times concurrently. (for instance, to attach a signal monitoring tool while reading a stream, or to send a frequency change ioctl) This patch fixes that condition. Signed-off-by: Roland Stoll <roland@xindex.de> Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-16tveeprom: Add proper tuner mapping for hauppauge eeprom id 133Ricardo Cerqueira
From: Ricardo Cerqueira <v4l@cerqueira.org> Do away with the need to set tuner=63 on cx88xx with recent HVR-1300 boards Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
2008-02-11Adds support for Genius TVGo A11MCEMauro Carvalho Chehab
From: Adrian Pardini <pardo.bsso@gmail.com> Signed-off-by: Adrian Pardini <pardo.bsso@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-11merge: http://www.linuxtv.org/hg/~dougsland/v4l-mutexMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-10arv/planb/vino: Add kernel validation to mutexDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@gmail.com> Added kernel validation to support mutex/semaphore. (kernel < 2.6.16) Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
2008-02-09 autosuspend supportMauro Carvalho Chehab
From: Tobias Lorenz <tobias.lorenz@gmx.net> Together with Oliver Neukum from Novell, USB autosuspend support was added. Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-09Fix firmware size and number of firmwaresMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-09Improve xc3028 firmware-tool seek modeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Add a method to allow seek mode to find different versions of base firmwares. This is useful to seek for older Xceive firmware revisions. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-08em28xx: add URB_NO_TRANSFER_DMA_MAP, since urb->transfer_dma is setMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Thanks to Alan Stern <stern@rowland.harvard.edu> for pointing this issue. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-08Allow more than one em28xx boardMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> em28xx driver is capable of handling more than one usb device. However, isoc transfers require a large amount of data to be transfered. Before this patch, just one em28xx board were enough to allocate more than 50% URBs: T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc=480/800 us (60%), #Int= 0, #Iso= 2 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 So, only one board could use an USB host at the same time. After the patch, it is possible to use more than one em28xx at the same time, on the same usb host, if the image size is slower or equal to 345600, since those images will require about 30% of the URBs: T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc=232/800 us (29%), #Int= 0, #Iso= 2 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 So, in thesis, after the patch, it would be possible to use up to 3 boards by each usb host, if the devices are generating small images. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-07 Add two new fourcc codes for 16bpp formatsMauro Carvalho Chehab
From: Steven Whitehouse <steve@chygwyn.com> This adds two new fourcc codes (as per info at fourcc.org) for 16bpp mono and 16bpp Bayer formats. Signed-off-by: Steven Whitehouse <steve@chygwyn.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-07Add minimal verison requirement for soc-camera driverMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-05 Phycore pcm-990-specific code for the PXA270 Quick Capture driverMauro Carvalho Chehab
From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Platform-specific code for Phytec's phyCORE-PXA270 platform Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-07Import pcm990-baseboard, needed by PXA270 Quick Capture driverMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-05 Add support for the MT9V022 cameraMauro Carvalho Chehab
From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> This driver supports Micron MT9V022 colour camera. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-05 Add support for the MT9M001 cameraMauro Carvalho Chehab
From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> This driver supports Micron MT9M001 monochrome and colour cameras. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-05 V4L2 soc_camera driver for PXA27x processorsMauro Carvalho Chehab
From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> This patch adds a driver for the Quick Capture Interface on the PXA270. It is based on the original driver from Intel, but has been re-worked multiple times since then, now for the first time it supports the V4L2 API. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-07Import pxa specific code, needed by pxa-camera driverMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-05 soc_camera V4L2 driver for directly-connected SoC-based camerasMauro Carvalho Chehab
From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> This driver provides an interface between platform-specific camera busses and camera devices. It should be used if the camera is connected not over a "proper" bus like PCI or USB, but over a special bus, like, for example, the Quick Capture interface on PXA270 SoCs. Later it should also be used for i.MX31 SoCs from Freescale. It can handle multiple cameras and / or multiple busses, which can be used, e.g., in stereo-vision applications. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-05 Add chip IDs for Micron mt9m001 and mt9v022 CMOS camerasMauro Carvalho Chehab
From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Add V4L2_IDENT chip IDs for mt9m001 and mt9v022 cameras, will be used by future patches, primarily to implement the g_chip_ident ioctl. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-07merge: http://ifup.org/hg/v4l-specMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-07Make it work also with usb driversMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> USB drivers, like em28xx and tm6000, have 8 or 16 bit registers, instead of 32, at host. This patch adds an option to set step 1 when listing registers on those devices. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-06em28xx-alsa: Add a missing mutexMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-06em28xx: makes audio settings more stableMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Improves audio configurations on em28xx: - mutes audio before changing amux; - adds a delay after setting audio src; - waits up to 50ms for ac97 busy. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-06em28xx: Fix endian and returns the correct valuesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-06em28xx: Fix printing debug values higher than 127Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-06em28xx: Allow register dump/setting for debugMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Adds vidioc_[g|s]_register handlers. This allows getting/setting register from em28xx. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-05Fix BUG in changeset 7157Mauro Carvalho Chehab
From: e9hack <e9hack@googlemail.com> compiling of the current HG tree fails on linux 2.6.24. I think it is a bug in changeset 7157: The definition of i2c_verify_client() should not be inside #ifndef BIT_MASK / #endif. The variable i2c_bus_type is only public on 2.6.23.x (maybe also on earlier versions) but not on 2.6.24. The following patch does fix the problem on 2.6.24 for me: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-05Fix em28xx audio initializationMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> AC97 register initialization seem to always be needed. This patch fixes audio for Prolink/Pixelview USB2 board. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-05Fix compilation against kernel 2.6.23Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-05 em28xx/em28xx-core.c: fix use of potentially uninitialized variableMauro Carvalho Chehab
From: Andrew Morton <akpm@linux-foundation.org> drivers/media/video/em28xx/em28xx-core.c: In function 'em28xx_set_audio_source': drivers/media/video/em28xx/em28xx-core.c:276: warning: 'no_ac97' may be used uninitialized in this function This looks like a genuine bug to me. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-05backport commit a3c53e2310192e63e49610ffcb6a36b2a706fa3eMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Original Changelog: Author: Daniel Walker <dwalker@mvista.com> Date: Thu Jan 17 12:52:05 2008 -0800 fix wrong sized spinlock flags argument Correct wrong sized spinlock flags, form int to unsigned long. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-05More English fixes from kernel treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-05Order is wrong, when comparing with kernel versionMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-05merge: http://ifup.org/hg/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-04 03:36:43 +0000