| Age | Commit message (Collapse) | Author |
|---|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- VIDEO_CX88_DVB_ALL_FRONTENDS should select DVB_ZL10353
- created VIDEO_CX88_DVB_ZL10353, for selective zl10353 support in cx88-dvb.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Oliver Endriss <o.endriss@gmx.de>
Use refactored LNBP21/BSBE1 code for Technotrend/Hauppauge DVB-S rev 2.3.
As a side effect, FE_ENABLE_HIGH_LNB_VOLTAGE ioctl is supported now.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
|
|
From: Perceval Anichini <perceval.anichini@streamvision.fr>
TechnoTrend S-1500 card handling moved from budget.c to budget-ci.c.
Signed-off-by: Perceval Anichini <perceval.anichini@streamvision.fr>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
|
|
From: Oliver Endriss <o.endriss@gmx.de>
Moved duplicated code to separate files.
LNBP21 stuff rewritten from scratch, BSBE1 copied from av7110.c.
Modified budget driver to use the new routines.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
|
|
From: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Add support for the FE6600 tuner used on the DVB-T Hybrid board.
Add support for the Zarlink ZL10353 DVB-T demodulator, which supersedes the
MT352, used on the DViCO FusionHDTV DVB-T Hybrid and later model Plus boards.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
The test " ifeq ($(CONFIG_VIDEO_DEV),m) " isn't working in
the inst_foo section of the Makefile. Since we are already
warning the user that errors may occur in the install step,
it is safe to include videodev.ko whether or not it is
actually present.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Hartmut Hackmann <hartmut.hackmann@t-online.de>
deleted 2 semicolons at end of functions
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
|
|
From: Hartmut Hackmann <hartmut.hackmann@t-online.de>
- Init message was sent to wrong slave address
- Deleted outdated comment
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- ELSA EX-VISION 500TV was incorrectly programmed to have the same
subsystem ID as ELSA EX-VISION 300TV, (1048:226b)
- This changeset replaces the incorrect subsystem ID (1048:226b)
with the correct one (1048:226a) for the ELSA EX-VISION 500TV.
Thanks-to: TAMUKI Shoichi <tamuki@linet.gr.jp>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- Corrected autodetection for saa7130 card:
subsystem: 1048:226c, board: ELSA EX-VISION 700TV
Thanks-to: Gunther Mayer <gunther.mayer@gmx.net>
Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Also fixed a missing ; at the end of a function
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Duncan Sands <duncan.sands@math.u-psud.fr>
This patch fixes the strange crashes I was seeing after using
bttv card, caused by a buffer overflow in bttv_risc_packed.
The instruction buffer size calculation contains two errors:
(a) a non-zero padding value can push the start of the next bpl
section to just before a page border, leading to more scanline
splits and thus additional instructions.
(b) the first DMA region can be smaller than one page, so there can
be a scanline split even if bpl*lines is smaller than PAGE_SIZE.
For example, consider the case where offset is 0, bpl is 2, padding
is 4094, lines is smaller than 2048, the first DMA region has size 1
and all others have size PAGE_SIZE, assumed to equal 4096. Then
all bpl regions cross page borders and the number of instructions
written is 2*lines+2, rather than lines+2 (the current estimate).
With this patch the number of instructions for this example is
estimated to be 2*lines+3.
Also, the BUG_ON that was supposed to catch buffer overflows contained
a thinko causing it fire only if the buffer was overrun by a factor of
16 or more, so it fixes the the BUG_ON's (using sizeof rather than "4").
Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mike Isely <isely@pobox.com>
The wire protocol to the PVR USB2 hardware limits the total size of an
I2C write transfer (among other things). The driver detects this case
and fails the transfer; this change also logs the message. We need
this in order to catch V4L modules which might be attempting such
transfers and deal with them on a case-by-case basis.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Ian Pickworth <ian@pickworth.me.uk>
- fix temporary debug code by changing printk to dprintk at level 1.
- move CORE_IOCTL messages from level 1 to level 2.
- this should help with selective debugging,
while not filling people's logs up during normal use.
Signed-off-by: Ian Pickworth <ian@pickworth.me.uk>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
|
|
From: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
|
|
Thanks to Edgar Toerning
Signed-off-by: Manu Abraham <manu@linuxtv.org>
|
|
Thanks to Edgar Toernig
Signed-off-by: Manu Abraham <manu@linuxtv.org>
|
|
Thanks to Edgar Toernig
Signed-off-by: Manu Abraham <manu@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- removed 'make pvrusb2' merge command
- created in-kernel Makefile, Kconfig not yet done.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- moved out of v4l_experimental
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Mike Isely <isely@pobox.com>
This implements a module option which may be used to pause
initialization of the driver right after the point where the hardware
is reset. The idea here is to provide a means for the driver to stay
out of the way until the hardware has finished initializating itself.
The default delay is zero, which disables it (at the moment I don't
think the delay is needed but it's worth leaving the logic in place to
do it).
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- killed I2C_ALGO_BIT
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Marco Schluessler <marco@lordzodiac.de>
Workaround for Nexus CA: Debi test fails unless first debi write is repeated.
Signed-off-by: Marco Schluessler <marco@lordzodiac.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
merge:
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
merge:
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
merge:
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
merge:
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mattias Nordstrom <nordstrom@realnode.com>
I have a TT C1500 card (saa7146, STV0297) which had problems tuning
channels at QAM128 (like the ones in the Finnish HTV / Welho network).
A fix which seems to work perfectly so far is to change the delay for
QAM128 to the same values as for QAM256 in stv0297_set_frontend(),
Signed-off-by: Mattias Nordstrom <nordstrom@realnode.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Alan Cox <alan@redhat.com>
There has been a CPIA2 driver out of kernel for a long time and it has
been pretty clean for some time too. This is an import of the
sourceforge driver which has been stripped of
- 2.4 back compatibility
- 2.4 old style MJPEG ioctls
A couple of functions have been made static and the docs have been
repackaged into Documentation/video4linux. The rvmalloc/free functions now
match the cpia driver again. Other than that this is the code as is.
Tested on x86-64 with a QX5 microscope.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Thilo Berger <thilo_berger@gmx.net>
Support for Satelco EasyWatch DVB-S light.
Signed-off-by: Thilo Berger <thilo_berger@gmx.net>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
|
|
From: Mike Isely <isely@pobox.com>
Modify the I2C adapter implementation in pvrusb2 such that
I2C_FUNC_I2C is advertised to clients; this allows cx25840 to attach.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Implement VIDIOC_LOG_STATUS ioctl() to the application. Implement
generation of VIDIOC_LOG_STATUS to the modules. Implement trigger of
VIDIOC_LOG_STATUS from sysfs when user cats a few key files, to help
with debugging.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
Newer PVR USB2 hardware uses a larger eeprom. These changes allow the
driver to detect and handle the different eeprom.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
The FX2 firmware in the PVR USB2 device can report the I2C address of
the resident eeprom device. Implement code to retrieve this information.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Mike Isely <isely@pobox.com>
The $Id$ keywords present in the pvrusb2 driver reflect information
from the old SCM, useless here. For now, undo all the expansions.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Nico Sabbi <nsabbi@tiscali.it>
This patch adds DVB-T support, no DVB-S yet
Signed-off-by: Nico Sabbi <nsabbi@tiscali.it>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
|
|
From: Hartmut Hackmann <hartmut.hackmann@t-online.de>
- fixed tda9886 port 2 setting
- turned remote control receiver off via saa7134 GPIO to avoid i2c hangs
- modified tda9886 client calls to direct i2c access to allow proper return
to analog mode
- allow mode change to V4L2_TUNER_DIGITAL_TV in tuner VIDIOC_S_FREQUENCY
client call
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
|
|
From: Hartmut Hackmann <hartmut.hackmann@t-online.de>
The probing code for tda8290 changes the state of the tda9887 GP ports.
The patch assumes that if probing for tda8290 failed, this must be a
tda9887 and restores its power on defaults.
This should solve the module load order issue with some pinnacle cards.
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
This ensures that ivtv-svnversion.h and the ivtv symlinks are present,
in case 'make clean' was run prior to 'make ivtv-update'
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
On 2/17/06, Darren Salt <linux@youmustbejoking.demon.co.uk> wrote:
> + u8 buffer [] = { 0x10,0x12,0x13,0x04,0x16,0x00,0x14,0x04,0x017,0x00 };
> Shouldn't buffer be declared static const?
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Peter Beutner <p.beutner@gmx.net>
The field "dvr" in struct dmxdev is competely unused. Remove
it and code which allocates, initializes and frees it.
Signed-off-by: Peter Beutner <p.beutner@gmx.net>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
|
|
From: Andreas Oberritter <obi@linuxtv.org>
Add two new ioctls to read the 33 bit presentation time stamp from audio
and video devices as defined in ITU T-REC-H.222.0 and ISO/IEC 13818-1.
Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Acked-by: Johannes Stezenbach <js@linuxtv.org>
|
|
From: Johannes Stezenbach <js@linuxtv.org>
use __devinit/__devexit/__devexit_p() where appropriate
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Some cleanup on printing enum names.
v4l2_memory now translated also to name.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
