Age | Commit message (Collapse) | Author |
|
Fix entry for PowerColor RA 330 and make it run with firmware version 2.7
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
This board has a s5h1409 demod, plus a xc30x8 tuner (probably, xc3018).
This patch adds proper support for radio, video, s-video, composite and ATSC.
However, support for radio and video depends on having s5h1409 i2c gate open,
otherwise, xc30x8 chip won't be visible.
For a better support, some rework is needed on cx88 driver, to allow adding
xc30x8 to i2c bus without sending i2c 0 byte reading to 0xc2 address.
Thanks to Vanessa Ezekowitz <vanessaezekowitz@gmail.com> for helping to figure
out the proper parameters for s5h1409 and the GPIO pins used by each
configuration.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
TV reception ok. S-video and Composite not tested. Audio not tested.
IR not implemented yet.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Fix GPIO for FusionHDTV 7 Gold tv / s-video / composite input selection.
Fix card textual name to match other FusionHDTV device names.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Add support for tuning DVB-T channels on DViCO's FusionHDTV DVB-T Pro board.
The IR remote and analog tuner are not supported at this time.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Some changes made by Mauro Chehab to allow merging it with some other xc3028
patches.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
linux/Documentation/video4linux/CARDLIST.cx88 | 1
linux/drivers/media/video/cx88/cx88-cards.c | 65 ++++++++++++++++++++++++--
linux/drivers/media/video/cx88/cx88-dvb.c | 23 +++++++++
linux/drivers/media/video/cx88/cx88.h | 1
4 files changed, 85 insertions(+), 5 deletions(-)
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
This patch ports a patch from Markus Rechberger to work with tuner-xc2028.
It adds entries for several cx88 boards with xc2038/3028 tuners.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
linux/Documentation/video4linux/CARDLIST.cx88 | 4
linux/drivers/media/video/cx88/cx88-cards.c | 192 +++++++++++++++++++++++++-
linux/drivers/media/video/cx88/cx88-dvb.c | 50 ++++++
linux/drivers/media/video/cx88/cx88.h | 4
4 files changed, 248 insertions(+), 2 deletions(-)
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
load ir-kbd-i2c for IR remote control support on DViCO FusionHDTV 5 PCI nano
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Steven Toth <stoth@hauppauge.com>
ATSC is known to work.
SVideo / Composite should work (I have no cable to test).
Analog tuner support does not work.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
|
|
From: Steven Toth <stoth@hauppauge.com>
From Zhang: This patch continues the support for the Pinnacle HD 800i.
Signed-off-by: Chaogui Zhang <czhang1974@gmail.com>
Patch committed as-is, cleanups to follow ... Steve
Signed-off-by: Steven Toth <stoth@hauppauge.com>
|
|
From: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
The ADS Tech InstantTV DVB-S is a clone of the KWorld DVB-S 100.
This patch adds autodetection support for this card based on
pci subsystem id.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Steven Toth <stoth@hauppauge.com>
The WinTV-HVR3000 is currently defined for analog support only. This
patch adds full DVB-T support. (DVB-S support will be added soon)
Signed-off-by: Steven Toth <stoth@hauppauge.com>
|
|
From: Steven Toth <stoth@hauppauge.com>
Adding support for Nova-T-PCI PCI ID 0070:9000
Signed-off-by: Steven Toth <stoth@hauppauge.com>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
The Club3D Zap TV2100 has been reported to be a clone of the Yuan PG300 and
KWorld/VStream XPert DVB-T with cx22702
Thanks-to: Lars Gjesse Kjellberg <lars.g.kjellberg@get2net.dk>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Add autodetection for PCI subsystem ID 107d:6632, to detect as
a Leadtek PVR 2000
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Steven Toth <stoth@hauppauge.com>
This is the first in a series of patches to add full WinTV-HVR1300
support to Linux. This first patch will enable analog TV support
and DVB-T support. Later patches will add the hardware MPEG encoder
support.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
|
|
From: David Bussenschutt <buzz@oska.com>
Add support for Shenzhen Tungsten Ages Tech TE-DTV-250 OEM for
Swann PCI TV Tuner Card
Signed-off-by: David Bussenschutt <buzz@oska.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Peter Naulls <peter@chocky.org>
This patch adds support for Norwood PCI TV Tuner (non-pro)
Signed-off-by: Peter Naulls <peter@chocky.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
This patch adds autodetection support for the AverMedia M150-D
blackbird MPEG encoder / analog video capture card.
This board is known to work with the ASUS PVR 416 configuration.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Eric Thomas <ethomas@claranet.fr>
add initial support for Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T
only analog is working for now
Signed-off-by: Eric Thomas <ethomas@claranet.fr>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Saqeb Akhter <johoja@gmail.com>
This patch adds support for the Geniatech Digistar, aka
Digiwave 103g DVB-S card.
Signed-off-by: Saqeb Akhter <johoja@gmail.com>
Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Add support for FusionHDTV 3 Gold (original revision), using the
card definition for FusionHDTV3 Gold-Q
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
The description of the card has been updated to it's full name/model.
The tuner has also been switched to a more compatible one (radio
wasn't working, now it is)
Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
|
|
From: Malcolm Valentine <farkit@iinet.net.au>
Add DVB-T and PAL-G television support for Winfast DTV2000H
Signed-off-by: Malcolm Valentine <farkit@iinet.net.au>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
Added support for a new cx88 card, including it's remote
Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
|
|
From: Angelo Marconi <am@massalombarda.net>
- Add support for ProLink Pixelview Playtv@P7000
Raw video and MPEG encoded video confirmed to work properly.
SVideo, Composite and FM inputs are untested - disabled for now.
Signed-off-by: Angelo Marconi <am@massalombarda.net>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Added autodetection for PCI subsystem id 1822:0019 to use
the card definition for CX88_BOARD_DNTV_LIVE_DVB_T_PRO
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Valentin Zagura <puthre@gmail.com>
This patch adds support for KWorld MCE 200 Deluxe.
Raw video is working perfectly, MPEG capture using
cx88-blackbird is also working, but the quality
could be improved.
FIXME: tested TV input only, disabled composite,
svideo and radio until they can be tested also.
Signed-off-by: Valentin Zagura <puthre@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Rusty Scott <rustys@ieee.org>
Added card definitions for the pcHDTV HD5500 ATSC/QAM card
Signed-off-by: Rusty Scott <rustys@ieee.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Add support for the FE6600 tuner used on the DVB-T Hybrid board.
Add support for the Zarlink ZL10353 DVB-T demodulator, which supersedes the
MT352, used on the DViCO FusionHDTV DVB-T Hybrid and later model Plus boards.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- Add initial support for KWorld HardwareMpegTV XPert.
- uses silicon tuner: tda8290 + tda8275
- standard video using cx88 broadcast decoder is working.
- blackbird mpeg encoder support (cx23416) not yet working.
- FM radio untested.
- audio is only working correctly in television mode,
all other modes disabled.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
- Add PCI ID for DigitalNow DVB-T Dual,
rebranded DViCO FusionHDTV DVB-T Dual.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- Add PCI ID for UltraView DVB-T Plus,
rebranded DViCO FusionHDTV DVB-T Plus
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
Support for DVB reception on the PCI half of the DViCO DVB-T Dual Digital.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
|
|
From: Manenti Marco <marco_manenti@colman.it>
* linux/Documentation/video4linux/CARDLIST.cx88:
* linux/drivers/media/video/cx88/cx88-cards.c:
* linux/drivers/media/video/cx88/cx88-dvb.c: (dvb_register):
* linux/drivers/media/video/cx88/cx88.h:
Add Kworld/Vstream Xpert DVB-T card with cx22702 tuner.
Signed-off-by: Manenti Marco <marco_manenti@colman.it>
Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru>
|
|
From: Chris Pascoe <c.pascoe@itee.uq.edu.au>
- Added support for VP-3054 (aka DigitalNow DNTV Live! DVB-T Pro!).
- This board has a secondary I2C bus and remote control.
- Added a new module to handle secondary I2C bus on this board.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
From: Steven Toth <stoth@hauppauge.com>
- Add support for another Nova-T-PCI PCI subdevice 0x9001
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
From: Steven Toth <stoth@hauppauge.com>
- Add support for the Hauppauge HVR1100 and HVR1100-LP products.
- Add i2c_gate_ctrl callback function to dvb_frontend_ops struct.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
From: Vadim Catana <skystar@moldova.cc>
- add support for KWorld DVB-S 100, based on the same chips as Hauppauge
Nova-S Plus (CX23883/CX24123/CX24109), without the Intersil ISL6421,
which is used for LNB control.
- LNB voltage and tone are controled by LNBDC and LNBTone bits from
register 0x29 of the CX24123 demodulator.
- The MO_GP0_IO register from CX23883 is used to turn LNB power on and off.
Signed-off-by: Vadim Catana <skystar@moldova.cc>
Acked-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
From: Steven Toth <stoth@hauppauge.com>
- Enable IR support for the Nova-S-Plus.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
From: Steven Toth <stoth@hauppauge.com>
- Added V4L support for the Nova-S-Plus and Nova-SE2 DVB-S products.
- Basic DVB-S support is working, analog video inputs work.
- It has one or two fixme comments,
primarily analog GPIOs (audio) and eeprom parsing.
- This should not be sent upstream yet!
- CX24123 code (in cx88-dvb.c) disabled until the
cx24123 module is added to dvb-kernel cvs.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
* ../linux/drivers/media/video/cx88/cx88-cards.h:
* ../linux/Documentation/video4linux/CARDLIST.cx88:
- New Avermedia 303 card (without radio).
Signed-off-by: Lubomir Bulej <bulej@nenya.ms.mff.cuni.cz>
|
|
- Add DVB card WinFast DTV1000-T
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- Added analog support for ATI HDTV Wonder
* tuner.h, tuner-simple.c: (default_set_tv_freq):
- Added support for the Philips TUV1236D tuner on the ATI HDTV Wonder
Signed-off-by: Kirk Lapray <kirk.lapray@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- Changed { .pll = 1, } to { .pll = PLL_28, }
on BTTV_BOARD_MACHTV "MachTV".
* bttv.h:
- Cleaned up spacing to be uniform for BTTV_BOARDS
* doc/CARDLIST.bttv:
- Added Osprey 440 card.
* doc/CARDLIST.cx88:
- Added Kworld Vstream ExpertDVD.
* saa7134-tvaudio.c: (mute_input_7134):
- Removed trailing whitespace.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
|