summaryrefslogtreecommitdiff
path: root/linux/Documentation/video4linux
AgeCommit message (Collapse)Author
2008-04-08saa7134: add analog support for Avermedia A700 cardsMauro Carvalho Chehab
Add support for composite and s-video inputs on Avermedia DVB-S Pro and DVB-S Hybrid+FM cards (both labled A700) to the saa7134 driver. XC2028 support for Hybrid+FM is still missing. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-27Add support for Kworld ATSC 120Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This board has a s5h1409 demod, plus a xc30x8 tuner (probably, xc3018). This patch adds proper support for radio, video, s-video, composite and ATSC. However, support for radio and video depends on having s5h1409 i2c gate open, otherwise, xc30x8 chip won't be visible. For a better support, some rework is needed on cx88 driver, to allow adding xc30x8 to i2c bus without sending i2c 0 byte reading to 0xc2 address. Thanks to Vanessa Ezekowitz <vanessaezekowitz@gmail.com> for helping to figure out the proper parameters for s5h1409 and the GPIO pins used by each configuration. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-14Add basic support for Prolink Pixelview MPEG 8000GTMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> TV reception ok. S-video and Composite not tested. Audio not tested. IR not implemented yet. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-13bttv: added support for Kozumi KTV-01C cardMauro Carvalho Chehab
From: Mauro Lacy <mauro@lacy.com.ar> Signed-off-by: Mauro Lacy <mauro@lacy.com.ar> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-13Support for a 16-channel bt878 cardMauro Carvalho Chehab
From: Ernesto Hernández-Novich <emhn@usb.ve> I have what looks like a Geovision GV-600 (or 650) card. It has a large chip in the middle labeled CONEXANT FUSION 878A 25878-13 E345881.1 0312 TAIWAN It has an audio connector coming out from a chip labeled ATMEL 0242 AT89C2051-24PI It is identified as follows on my Debian GNU/Linux Etch (kernel 2.6.18) ... 01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) ... 01:0a.0 0400: 109e:036e (rev 11) Subsystem: 008a:763c Flags: bus master, medium devsel, latency 64, IRQ 58 Memory at dfffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 01:0a.1 0480: 109e:0878 (rev 11) Subsystem: 008a:763c Flags: bus master, medium devsel, latency 64, IRQ 58 Memory at dffff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 It was being detected as a GENERIC UNKNOWN CARD both by the 2.6.18 kernel and the latest v4l-dvb drivers, but it did not work at all. The card has sixteen (16) BNC video inputs, four of them on the board itself and twelve on three daughter-cards. It has a single bt878 chip, no tuner and what looks like and audio input. After doing some research I managed to get only eight channels working by forcing card=125 and those DID NOT match channels 0-7 on the card, and no audio. Based on what was working for card=125, I added the card definition block, added a specific muxsel routine and got the card working fully with xawtv, where the sixteen channels show up as Composite0 to Composite15, matching the channel labels in the card and daughter-cards. I have made no efforts yet to get audio working, but would appreciate any pointers. Signed-off-by: Ernesto Hernández-Novich <emhn@usb.ve> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-25cx88: fix GPIO for FusionHDTV 7 Gold input selectionMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Fix GPIO for FusionHDTV 7 Gold tv / s-video / composite input selection. Fix card textual name to match other FusionHDTV device names. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-02-25cx88: add analog support for DVICO FusionHDTV7 GoldMichael Krufky
From: Steven Toth <stoth@hauppauge.com> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-02-05Add support for xc3028-based boardsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This patch adds support for the following saa7134 xc3028 based boards: 132 -> AVerMedia Cardbus TV/Radio (E506R) [1461:f436] 133 -> AVerMedia Hybrid TV/Radio (A16D) [1461:f936] 134 -> Avermedia M115 [1461:a836] 135 -> Compro VideoMate T750 [185b:c900] This is based on a original patch thanks to Markus Rechberger that added xc3028 gpio init code for the above boards. This patch moves saa7134_tuner_callback to saa7134-cards, originally used only by tda8290 DVB-S boards. The callback was made more generic to support other tuners. Currently, it supports both tda8290 and xc2028/xc3028 tuners. Added also the basis for xc5000 tuner callback. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/Documentation/video4linux/CARDLIST.saa7134 | 4 linux/drivers/media/video/saa7134/saa7134-cards.c | 255 ++++++++++++++++++++-- linux/drivers/media/video/saa7134/saa7134-core.c | 34 -- linux/drivers/media/video/saa7134/saa7134-dvb.c | 39 +++ linux/drivers/media/video/saa7134/saa7134.h | 7 5 files changed, 290 insertions(+), 49 deletions(-)
2008-01-29Support DVB-T tuning on the DViCO FusionHDTV DVB-T ProMauro Carvalho Chehab
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> Add support for tuning DVB-T channels on DViCO's FusionHDTV DVB-T Pro board. The IR remote and analog tuner are not supported at this time. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Some changes made by Mauro Chehab to allow merging it with some other xc3028 patches. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/Documentation/video4linux/CARDLIST.cx88 | 1 linux/drivers/media/video/cx88/cx88-cards.c | 65 ++++++++++++++++++++++++-- linux/drivers/media/video/cx88/cx88-dvb.c | 23 +++++++++ linux/drivers/media/video/cx88/cx88.h | 1 4 files changed, 85 insertions(+), 5 deletions(-)
2008-01-29cx88: Add xc2028/3028 boardsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This patch ports a patch from Markus Rechberger to work with tuner-xc2028. It adds entries for several cx88 boards with xc2038/3028 tuners. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/Documentation/video4linux/CARDLIST.cx88 | 4 linux/drivers/media/video/cx88/cx88-cards.c | 192 +++++++++++++++++++++++++- linux/drivers/media/video/cx88/cx88-dvb.c | 50 ++++++ linux/drivers/media/video/cx88/cx88.h | 4 4 files changed, 248 insertions(+), 2 deletions(-)
2008-02-25merge: http://linuxtv.org/hg/~mkrufky/cx88-xc2028Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-17cx88: fix FusionHDTV 5 PCI nano name and enable IR supportMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> load ir-kbd-i2c for IR remote control support on DViCO FusionHDTV 5 PCI nano Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-02-16merge: ~stoth/pci-nanoMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-02-11Adds support for Genius TVGo A11MCEMauro Carvalho Chehab
From: Adrian Pardini <pardo.bsso@gmail.com> Signed-off-by: Adrian Pardini <pardo.bsso@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-30 Add USB ID for a newer variant of Hauppauge WinTV-HVR 900Mauro Carvalho Chehab
From: Luc Saillard <luc@saillard.org> Device description: WinTV-HVR-900 M/R: 65018/B3C0 ##4207 Signed-off-by: Luc Saillard <luc@saillard.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-15cx88: Add support for the Dvico PCI Nano.Steven Toth
From: Steven Toth <stoth@hauppauge.com> ATSC is known to work. SVideo / Composite should work (I have no cable to test). Analog tuner support does not work. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-02-17saa7134: add support for the MSI TV@nywhere A/D v1.1 cardHartmut Hackmann
From: Russell Kliese <russell@kliese.wattle.id.au> Signed-off-by: Russell Kliese <russell@kliese.wattle.id.au> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2008-02-17saa7134: add support for the Creatix CTX953_V.1.4.3 HybridHartmut Hackmann
From: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2008-02-16saa7134: add support for the NXP Snake DVB-S reference designHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2008-01-05New card supported(partially): Pinnacle 800iSteven Toth
From: Steven Toth <stoth@hauppauge.com> From Zhang: This patch continues the support for the Pinnacle HD 800i. Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Patch committed as-is, cleanups to follow ... Steve Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-05xc5000: Tuner analog supportSteven Toth
From: Steven Toth <stoth@hauppauge.com> From Zhang: This an updated patch that adds analog support for the xc5000 tuner driver. it was tested on a Pinnacle PCTV HD 800i card (patches to follow). Patch commited as-is, cleanup to follow ... Steve. Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-13Add USB ID for a newer variant of Hauppauge WinTV USB2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Thanks to Jeroen Janssen <Jeroen.Janssen@vub.ac.be> CC: Jeroen Janssen <Jeroen.Janssen@vub.ac.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-12 saa7134: add MSI TV@nywhere Plus with the older tda8275 tunerMauro Carvalho Chehab
From: Hermann Pitton <hermann-pitton@arcor.de> Thanks go to Mark Schultz for the initial contribution and to Dean Hilkewich for testing it again. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-09merge: http://linuxtv.org/hg/~tmerle/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-09Fix CARDLIST.saa7134Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-09usbvision: add Pinnacle Studio PCTV USB (NTSC) FM V3Thierry MERLE
From: Thierry MERLE <thierry.merle@free.fr> Add the "Pinnacle Studio PCTV USB (NTSC) FM" device. This is the third occurrence of the same device designation... Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
2008-01-07Add missing entry for Beholder BeholdTV 407Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Andrey J. Melnikov <temnota@kmv.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-07Add Beholder TV 401/405/407/409/505/507/609/M6 supportMauro Carvalho Chehab
From: Andrey J. Melnikoff (TEMHOTA) <temnota@kmv.ru> This patch updates cardlist for Beholder TV tuners: old models (with GPIO ir) 401, 403, 405, 407, 409, 505, 507 and add support for 607, 609, M6 cards with new i2c-ir. Signed-off-by: Igor Kuznetsov <igk72@yandex.ru> Signed-off-by: Andrey J. Melnikov <temnota@kmv.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-01Fix script to work on 32 bit intMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> The previous version used to require that perl to run on 64 bit machines. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-31Optimize scriptMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> The previous script were generated using a non-optimized way. This patch replaces the script with an optimized one, where each firmware is direcly copied from HVR12x0 driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-31Add a tool for extracting xc3028 version 2.7 firmwareMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This tool allows the extraction of xc3028 v2.7 firmware from HVR 12x0 file. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27cx23885: add missing subsystem IDs for Hauppauge HVR1500 RetailMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-27cx23885: add missing subsystem ID for Hauppauge HVR1800 RetailMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-17cx23885: add support for Hauppauge WinTV HVR-1500Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-17Add support for the Hauppauge HVR1500Q.Steven Toth
From: Steven Toth <stoth@hauppauge.com> The express card ATSC/QAM tuner. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2007-12-17V4L/DVB (em28xx): Add support for Pinnacle Dazzle DVC 100Mauro Carvalho Chehab
From: Aurelien Jarno <aurelien@aurel32.net> The patch below adds the "Pinnacle Dazzle DVC 100" to the list of cards supported by the em28xx driver. As the configuration is the same as the DVC 90 one, it simply adds a new USB ID to the list of devices supported by the DVC 90 configuration. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-08ivtv: add AVerMedia EZMaker PCI Deluxe supportHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add support for the AVerMedia EZMaker PCI Deluxe and update the ivtv cardlist. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-01-20saa7134: detect the LifeView FlyDVB-T Hybrid Mini PCIHartmut Hackmann
From: Hermann Pitton <hermann-pitton@arcor.de> Thanks to Angelo Lisco for his initial patch we missed and to Ahmet Dogan Ugurel confirming such a device functional. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2008-01-20saa7134: add support for the Medion / Creatix CTX948 cardHartmut Hackmann
From: Hermann Pitton <hermann-pitton@arcor.de> This adds support for analog inputs and DVB-T. Good sensitivity for DVB-T currently needs to use analog TV first. DVB-S support is not yet completed, but is on the way. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2008-01-20support for Twinhan Hybrid DTV-DVB 3056 PCIHartmut Hackmann
From: Hermann Pitton <hermann-pitton@arcor.de> S-Video is unconfirmed, but likely correct. The remote is not yet investigated. Thanks go to Sioux for providing code and asking to fix the auto detection. Signed-off-by: sioux <sioux_it@libero.it> Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2008-01-25zr364xx: add support for Creative DiVi CAM 516Antoine Jacquet
From: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Antoine Jacquet <royale@zerezo.com>
2008-01-25zr364xx: add support for Pentax Optio 50Antoine Jacquet
From: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Antoine Jacquet <royale@zerezo.com>
2008-01-25zr364xx: fix typo in documentationAntoine Jacquet
From: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Antoine Jacquet <royale@zerezo.com>
2007-11-23Add missing USB ID's at CARDLIST.em28xxMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-20Use MTS firmware for the HVR-900Mauro Carvalho Chehab
From: Aidan Thornton <makosoft@googlemail.com> The HVR-900 requires the MTS version of the xc3028 firmware in order to get any sound. The below patch selects this firmware variant on HVR-900 cards, as well as splitting the HVR-950 into its own entry (since I don't know if it uses the MTS variant and it will have to be split off eventually anyway). Signed-off-by: Aidan Thornton <makosoft@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-15saa7134: add autodetection support for alternate subids of Hauppauge HVR1110Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-11-12Adds support for MT9V111 on sn9c102Mauro Carvalho Chehab
From: Luca Risolia <luca.risolia@studio.unibo.it> Adds a new image sensor to the sn9c102 driver. Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-03Add V-Gear PocketTV to Cardlist.em28xxMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-03Add entry for Pixelview Prolink PlayTV USB 2.0Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-03Fix: Adds the generic PCI IDs for em28xxMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 16:48:09 +0000