Age | Commit message (Collapse) | Author |
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
merge:
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Rickard Osser <ricky@osser.se>
- Added support for AVerMedia A169 Dual Analog tuner card
(dual saa7134 decoders - only 1 working right now)
- Added autodetection for both parts of the card.
It shows up like 2 cards, B1 and B
- Enabled tuner B1, SVIDEO on B1 and composite1 through SVIDEO,
FIXME: B is more or less dead at this point and I suspect the
FM-radio is on the B part of the board
Signed-off-by: Rickard Osser <ricky@osser.se>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- added tuner_lg_taln_pal_secam_ranges
- renamed tuner 66 from TUNER_LG_NTSC_TALN_MINI to TUNER_LG_TALN
- updated FlyTV mini Asus Digimatrix with new tuner
Thanks-to: Rickard Osser <ricky@osser.se>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Adrian Bunk <bunk@stusta.de>
- make 2 needlessly global functions static
- remove cpia2_setup(): the driver already allows setting parameters
through module_param(), and there's no reason for having two different
ways for setting the same parameters
kernel-sync
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Also Removed whitespaces introduced by previous tena patch
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
I have the same card with the same PCI id, but from KWorld.
The patch documents that this is the same card.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- The tuner used in DViCO FusionHDTV DVB-T hybrid is made by Thomson
- renamed tuner and dvb_pll structs accordingly
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Add support for the FE6600 tuner used on the DVB-T Hybrid board.
Add support for the Zarlink ZL10353 DVB-T demodulator, which supersedes the
MT352, used on the DViCO FusionHDTV DVB-T Hybrid and later model Plus boards.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- ELSA EX-VISION 500TV was incorrectly programmed to have the same
subsystem ID as ELSA EX-VISION 300TV, (1048:226b)
- This changeset replaces the incorrect subsystem ID (1048:226b)
with the correct one (1048:226a) for the ELSA EX-VISION 500TV.
Thanks-to: TAMUKI Shoichi <tamuki@linet.gr.jp>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- Corrected autodetection for saa7130 card:
subsystem: 1048:226c, board: ELSA EX-VISION 700TV
Thanks-to: Gunther Mayer <gunther.mayer@gmx.net>
Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Mike Isely <isely@pobox.com>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- moved out of v4l_experimental
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Alan Cox <alan@redhat.com>
There has been a CPIA2 driver out of kernel for a long time and it has
been pretty clean for some time too. This is an import of the
sourceforge driver which has been stripped of
- 2.4 back compatibility
- 2.4 old style MJPEG ioctls
A couple of functions have been made static and the docs have been
repackaged into Documentation/video4linux. The rvmalloc/free functions now
match the cpia driver again. Other than that this is the code as is.
Tested on x86-64 with a QX5 microscope.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- There is no radio with this tuner card...
Thanks-to: Dwaine Garden <DwaineGarden@rogers.com>
- fixed capitalization in card name.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Andrew Burri <andrew.burri@gmail.com>
Signed-off-by: Andrew Burri <andrew.burri@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
S-Video
From: Karsten Suehring <ksuehring@gmx.net>
This patch adds another composite input to the Pinnacle PCTV 100i
definition which filters the chrominace signal from the luma input. This
improves video quality for Composite signals on the S-Video connector of
the card.
In addition the name string of the card is changed to include PCTV 40i
and 50i since these cards are identical.
Signed-off-by: Karsten Suehring <ksuehring@gmx.net>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Tamuki Shoichi <tamuki@linet.gr.jp>
Add support for ELSA EX-VISION 700TV, which is the ELSA Japan's
flagship model of the software encoding TV capture card.
All inputs (Television, Composite1 and S-Video) have been tested.
Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- use one Author per line, which allows us to add more
authors later without creating a mess.
- Add Michael Krufky, responsible for the following changes:
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2cbeddc976645262dbe036d6ec0825f96af70da3
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
- Add initial support for KWorld HardwareMpegTV XPert.
- uses silicon tuner: tda8290 + tda8275
- standard video using cx88 broadcast decoder is working.
- blackbird mpeg encoder support (cx23416) not yet working.
- FM radio untested.
- audio is only working correctly in television mode,
all other modes disabled.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Peter Hartshorn <p3r@users.sourceforge.net>
This is a analog / digital hybrid card
Signed-off-by: Peter Hartshorn <p3r@users.sourceforge.net>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
|
|
From: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Analog and DVB-T are working, Remote not yet.
This card is based on the new LifeView design, there should be many variants.
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
|
|
From: Giampiero Giancipoli <gianci@libero.it>
Additionally to the card support, this changeset adds the option
tda10046lifeview to get_dvb_firmware to download tda10046 firmware
from LifeView's site.
Signed-off-by: Giampiero Giancipoli <gianci@libero.it>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
|
|
From: Markus Rechberger <mrechberger@gmail.com>
added support for xc3028 to v4l which adds support for:
* Terratec Hybrid XS (analogue)
* Hauppauge HVR 900 (analogue)
Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
|
|
From: Markus Rechberger <mrechberger@gmail.com>
Changed description of KWorld PVR TV 2800RF
Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
|
|
From: Markus Rechberger <mrechberger@gmail.com>
added terratec hybrid xs product/vendorid
added gpio audio initialization for kworld pvr 2800rf
Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
|
|
From: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
|
|
From: Peter Missel <peter.missel@onlinehome.de>
* linux/Documentation/video4linux/CARDLIST.saa7134:
* linux/drivers/media/video/saa7134/saa7134-cards.c:
(saa7134_board_init1):
* linux/drivers/media/video/saa7134/saa7134-dvb.c: (dvb_init):
* linux/drivers/media/video/saa7134/saa7134.h:
- mark Typhoon cards as OEM of Lifeview.
Signed-off-by: Peter Missel <peter.missel@onlinehome.de>
Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru>
|
|
- Add PCI ID for DigitalNow DVB-T Dual,
rebranded DViCO FusionHDTV DVB-T Dual.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
Add support for Samsung tuner TCPN 2121P30A, used in
Hauppauge PVR-500 cards.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
- Add PCI ID for UltraView DVB-T Plus,
rebranded DViCO FusionHDTV DVB-T Plus
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
From: Julian Calaby <julian.calaby@gmail.com>
- Add bttv card MagicTV (rebranded MachTV)
Signed-off-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- get_dvb_firmware script updated accordingly:
- my $url = "http://www.linuxtv.org/~mkrufky/dvb-usb-bluebird-01.fw";
+ my $url = "http://www.linuxtv.org/download/dvb/firmware/dvb-usb-blue$
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
Support for DVB reception on the PCI half of the DViCO DVB-T Dual Digital.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
|
|
From: Peter Missel <peter.missel@onlinehome.de>
- Add support for LifeView FlyDVB Trio.
- all analog inputs are supported and working, including FM radio
- TO DO: dvb & remote control
Signed-off-by: Peter Missel <peter.missel@onlinehome.de>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
From: Manenti Marco <marco_manenti@colman.it>
* linux/Documentation/video4linux/CARDLIST.cx88:
* linux/drivers/media/video/cx88/cx88-cards.c:
* linux/drivers/media/video/cx88/cx88-dvb.c: (dvb_register):
* linux/drivers/media/video/cx88/cx88.h:
Add Kworld/Vstream Xpert DVB-T card with cx22702 tuner.
Signed-off-by: Manenti Marco <marco_manenti@colman.it>
Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru>
|
|
- Add DViCO Bluebird firmware to dvb_get_firmware script,
for FusionHDTV USB devices.
- Use usb alt setting 0 for EP4 transfer (dvb-t),
- Use usb alt setting 7 for EP2 transfer (atsc)
- Added comment to lgdt330x.c to indicate support for
DViCO FusionHDTV5 USB Gold.
Thanks to: Jeff Lee <JeffLee@dvico.com>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
- Added cx23415/6 firmware documentation from the ivtv project.
- Added header containing the firmware API commands for use
by all projects that use the cx2341x. First step towards a
shared cx2341x driver.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
From: Chris Pascoe <c.pascoe@itee.uq.edu.au>
- Added support for VP-3054 (aka DigitalNow DNTV Live! DVB-T Pro!).
- This board has a secondary I2C bus and remote control.
- Added a new module to handle secondary I2C bus on this board.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
Added new ID for different revision of card #58. It's the same card,
but with a tda8275a instead of a tda8275
Signed-off-by:
|
|
From: Michael Krufky <mkrufky@m1k.net>
- corrected Thomson DTT 7611 tuner programming, based on spec sheet
- renamed to Thomson DTT 761x
- applies to DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A
(DTT 7610 is similar, but slightly different programming)
- corrected frequency ranges for analog and digital modes
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- Updated firmware names
- kfree (NULL) is valid.
- assert_spin_locked() is the new way
- small fixes to make in sync with kernel
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
From: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
kernel-sync
- Removed inexistent site
- keep debug #if 0 at kernel patches
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
From: Steven Toth <stoth@hauppauge.com>
- Add support for another Nova-T-PCI PCI subdevice 0x9001
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
From: Steven Toth <stoth@hauppauge.com>
- Add support for the Hauppauge HVR1100 and HVR1100-LP products.
- Add i2c_gate_ctrl callback function to dvb_frontend_ops struct.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|