Age | Commit message (Collapse) | Author |
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
In order to be closer to V4L IR implementation, it is needed to replace
u8 custom, data
to:
u16 scan
This allows using non-rc5 mappings, like the 8 bit keycodes used on older
protocols. It will also allow future implementations of rc6 keystrokes
when needed.
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Jose Alberto Reguero <jareguero@telefonica.net>
El Miércoles, 5 de Agosto de 2009, Stefan Lippers-Hollmann escribió:
> Hi
>
> Connecting my TerraTec Cinergy T USB XE rev. 2 (0x0ccd, 0x0069) to kernel
> 2.6.31-rc5-git3, I get following kernel oops (complete dmesg and kernel
> config (amd64) attached) while the firmware[1] is uploaded to the device.
>
> This is a regression relative to 2.6.30.x, where this device is working
> fine. It also seems to be restricted to dvb_usb_af9015, as firmwares for
> several wlan cards are uploading fine. Would it help to bisect based on
> the changes to drivers/media/dvb/dvb-usb/af9015.c or is a wider scope
> required?
>
> Regards
> Stefan Lippers-Hollmann
>
> [1] http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmwar
>e_files/4.95.0/dvb-usb-af9015.fw
>
> usb 1-2: new high speed USB device using ehci_hcd and address 4
> usb 1-2: New USB device found, idVendor=0ccd, idProduct=0069
> usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> usb 1-2: Product: Cinergy T USB XE Ver.2
> usb 1-2: Manufacturer: TerraTec
> usb 1-2: SerialNumber: 10012007
> usb 1-2: configuration #1 chosen from 1 choice
> dvb-usb: found a 'TerraTec Cinergy T USB XE' in cold state, will try to
> load a firmware usb 1-2: firmware: requesting dvb-usb-af9015.fw
> dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
> BUG: unable to handle kernel paging request at ffffc9000db5ee17
> IP: [<ffffffff811d173b>] memcpy_c+0xb/0x20
> PGD 22fc07067 PUD 22fc14067 PMD 1a091b067 PTE 800000020d5fd161
> Oops: 0003 [#1] PREEMPT SMP
> last sysfs file:
> /sys/devices/pci0000:00/0000:00:1a.7/usb1/1-2/firmware/1-2/loading CPU 0
> Modules linked in: dvb_usb_af9015(+) dvb_usb dvb_core radeon drm bnep sco
> rfcomm l2cap bluetooth ppdev parport_pc lp parport acpi_cpufreq
> cpufreq_conservative cpufreq_stats cpufreq_ondemand freq_table
> cpufreq_performance cpufreq_powersave kvm_intel kvm ipv6 af_packet bridge
> stp snd_hda_codec_atihdmi rt2800usb snd_hda_codec_realtek zd1211rw
> rt2x00usb snd_hda_intel snd_hda_codec rt2x00lib input_polldev crc_ccitt
> snd_hwdep arc4 ath9k ecb snd_pcm b43 ath snd_seq snd_timer rng_core
> snd_seq_device mac80211 cfg80211 evdev snd rtc_cmos rtc_core soundcore
> rtc_lib pcspkr rfkill snd_page_alloc i2c_i801 processor led_class i2c_core
> button ext4 mbcache jbd2 crc16 dm_mirror dm_region_hash dm_log dm_snapshot
> dm_mod sg sr_mod sd_mod cdrom usbhid hid uhci_hcd ahci ssb firewire_ohci
> pcmcia firewire_core libata pcmcia_core crc_itu_t scsi_mod r8169 ehci_hcd
> mii usbcore nls_base intel_agp thermal fan Pid: 18663, comm: modprobe Not
> tainted 2.6.31-rc5-sidux-amd64 #1 EP45-DS3 RIP: 0010:[<ffffffff811d173b>]
> [<ffffffff811d173b>] memcpy_c+0xb/0x20 RSP: 0018:ffff880221185b50 EFLAGS:
> 00010202
> RAX: ffffc9000db5ee17 RBX: ffff880221185c18 RCX: 0000000000000002
> RDX: 0000000000000002 RSI: ffff880221185b6a RDI: ffffc9000db5ee17
> RBP: 0000000000000000 R08: ffff8800280442a0 R09: 0000000000000001
> R10: ffff8800378010c0 R11: ffffffff810284b0 R12: 0000000000000008
> R13: ffff880221185b68 R14: ffff880221179800 R15: ffff880221185bb4
> FS: 00007f7f1d4286f0(0000) GS:ffff880028034000(0000)
> knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: ffffc9000db5ee17 CR3: 00000001e21ec000 CR4: 00000000000026e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process modprobe (pid: 18663, threadinfo ffff880221184000, task
> ffff88021f0393e0) Stack:
> ffffffffa060b2ad ffffffffa060f220 00ff880221179800 0f002f4b88d0002b
> <0> 004500088673e9ea 0d13c9141c915e02 06803e010101fb08 0c800cc012007d40
> <0> bb800cc01200fa80 010000a000006480 ff02010202020102 ffff8802260823c0
> Call Trace:
> [<ffffffffa060b2ad>] ? af9015_rw_udev+0x24d/0x2d0 [dvb_usb_af9015]
> [<ffffffffa060b91b>] ? af9015_download_firmware+0x12b/0x190
> [dvb_usb_af9015] [<ffffffffa0604334>] ? dvb_usb_download_firmware+0x94/0xe0
> [dvb_usb] [<ffffffffa0604669>] ? dvb_usb_device_init+0x179/0x700 [dvb_usb]
> [<ffffffffa060c3ff>] ? af9015_usb_probe+0x12f/0xbf4 [dvb_usb_af9015]
> [<ffffffffa002e0a7>] ? usb_probe_interface+0xb7/0x190 [usbcore]
> [<ffffffff8126b5c8>] ? driver_probe_device+0x98/0x1b0
> [<ffffffff8126b773>] ? __driver_attach+0x93/0xa0
> [<ffffffff8126b6e0>] ? __driver_attach+0x0/0xa0
> [<ffffffff8126ad58>] ? bus_for_each_dev+0x58/0x80
> [<ffffffff8126a648>] ? bus_add_driver+0x268/0x2f0
> [<ffffffff8126ba69>] ? driver_register+0x79/0x170
> [<ffffffffa002de09>] ? usb_register_driver+0xa9/0x120 [usbcore]
> [<ffffffffa0063000>] ? af9015_usb_module_init+0x0/0x37 [dvb_usb_af9015]
> [<ffffffffa006301b>] ? af9015_usb_module_init+0x1b/0x37 [dvb_usb_af9015]
> [<ffffffff8100a04b>] ? do_one_initcall+0x3b/0x180
> [<ffffffff811cd8b1>] ? __up_read+0x21/0xc0
> [<ffffffff81072585>] ? __blocking_notifier_call_chain+0x65/0x90
> [<ffffffff81085618>] ? sys_init_module+0xe8/0x240
> [<ffffffff81011fc2>] ? system_call_fastpath+0x16/0x1b
> Code: 81 ea d8 1f 00 00 48 3b 42 20 73 07 48 8b 50 f9 31 c0 c3 31 d2 48 c7
> c0 f2 ff ff ff c3 90 90 90 48 89 f8 89 d1 c1 e9 03 83 e2 07 <f3> 48 a5 89
> d1 f3 a4 c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 RIP
> [<ffffffff811d173b>] memcpy_c+0xb/0x20
> RSP <ffff880221185b50>
> CR2: ffffc9000db5ee17
> ---[ end trace 605ab93fe7120203 ]---
I have the same problem with a recent v4l-dvb. The attached patch seem to
solve the problem.
Jose Alberto
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Add new USB ID (1b80:e400) for KWorld PlusTV Dual DVB-T Stick (DVB-T 399U).
The model number on the devices sticker label is "KW-DVB-T 399UR".
Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Nils Kassube <kassube@gmx.net>
Moving BOOT fixes problem.
Priority: normal
Signed-off-by: Nils Kassube <kassube@gmx.net>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Jan Nikitenko <jan.nikitenko@gmail.com>
Replace printing to magically sized temporary buffer with use
of KERN_CONT for continual printing of eeprom registers dump.
Since deb_info is defined as dprintk, which is conditionally defined
to printk without additional parameters, meaning that deb_info is equivalent
to direct printk (without adding KERN_ facility), we can use KERN_DEBUG and
KERN_CONT in there, eliminating the need for sprintf into temporary buffer
with not easily readable/magical size.
Though it's strange, that deb_info definition uses printk without KERN_
facility and callers don't use it either.
Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Jan Nikitenko <jan.nikitenko@gmail.com>
This patch fixes stack corruption bug present in af9015_eeprom_dump():
the buffer buf is one byte smaller than required - there is 4 chars
for address prefix, 16*3 chars for dump of 16 eeprom bytes per line
and 1 byte for zero ending the string required, i.e. 53 bytes, but
only 52 are provided.
The one byte missing in stack based buffer buf causes following oops
on MIPS little endian platform, because i2c_adap pointer in
af9015_af9013_frontend_attach() is corrupted by inlined function
af9015_eeprom_dump():
CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc ==
803a4488, ra == c049a1c8
Oops[#1]:
Cpu 0
$ 0 : 00000000 10003c00 00000000 803a4468
$ 4 : 8f17c600 8f067b30 00000002 00000038
$ 8 : 00000001 8faf3e98 11da000d 09010002
$12 : 00000000 00000000 00000000 0000000a
$16 : 8f17c600 8f067b68 8faf3c00 8f067c04
$20 : 8f067b9c 00000100 8f067bf0 80104100
$24 : 00000000 2aba9fb0
$28 : 8f066000 8f067af0 802cbc48 c049a1c8
Hi : 00000000
Lo : 00000000
epc : 803a4488 i2c_transfer+0x20/0x104
Not tainted
ra : c049a1c8 af9013_read_reg+0x78/0xc4 [af9013]
Status: 10003c03 KERNEL EXL IE
Cause : 00808008
BadVA : 00000000
PrId : 03030200 (Au1550)
Modules linked in: af9013 dvb_usb_af9015(+) dvb_usb dvb_core firmware_class
i2c_au1550 au1550_spi
Process modprobe (pid: 2757, threadinfo=8f066000, task=8fade098, tls=2aad6470)
Stack : c049f5e0 80163090 805ba880 00000100 8f067bf0 0000d733 8f067b68 8faf3c00
8f067c04 c049a1c8 80163bc0 8056a630 8f067b40 80163224 80569fc8 8f0033d7
00000038 80140003 8f067b2c 00010038 c0420001 8f067b28 c049f5e0 00000004
00000004 c049a524 c049d5a8 c049d5a8 00000000 803a6700 00000000 8f17c600
c042a7a4 8f17c600 c042a7a4 c049c924 00000000 00000000 00000002 613a6c00
...
Call Trace:
[<803a4488>] i2c_transfer+0x20/0x104
[<c049a1c8>] af9013_read_reg+0x78/0xc4 [af9013]
[<c049a524>] af9013_read_reg_bits+0x2c/0x70 [af9013]
[<c049c924>] af9013_attach+0x98/0x65c [af9013]
[<c04257bc>] af9015_af9013_frontend_attach+0x214/0x67c [dvb_usb_af9015]
[<c03e2428>] dvb_usb_adapter_frontend_init+0x20/0x12c [dvb_usb]
[<c03e1ad8>] dvb_usb_device_init+0x374/0x6b0 [dvb_usb]
[<c0426120>] af9015_usb_probe+0x4fc/0xfcc [dvb_usb_af9015]
[<80381024>] usb_probe_interface+0xbc/0x218
[<803227fc>] driver_probe_device+0x12c/0x30c
[<80322a80>] __driver_attach+0xa4/0xac
[<80321ed0>] bus_for_each_dev+0x60/0xd0
[<8032162c>] bus_add_driver+0x1e8/0x2a8
[<80322cdc>] driver_register+0x7c/0x17c
[<80380d30>] usb_register_driver+0xa0/0x12c
[<c042e030>] af9015_usb_module_init+0x30/0x6c [dvb_usb_af9015]
[<8010d2a4>] __kprobes_text_end+0x3c/0x1f4
[<80167150>] sys_init_module+0xb8/0x1cc
[<80102370>] stack_done+0x20/0x3c
Code: afb10018 7000003f 00808021 <8c430000> 7000003f 1060002d 00c09021
8f830014 3c02efff
Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Antti Palosaari <crope@iki.fi>
Add USB ID (0458:4012) for Genius TVGo DVB-T03.
Thanks to Petr Vodicka <vodicka.petr@email.cz> for reporting and testing.
Priority: normal
Signed-off-by: Antti Palosaari <crope@iki.fi>
Tested-by: Petr Vodicka <vodicka.petr@email.cz>
|
|
From: Wen-chien Jesse Sung <jesse@cola.voip.idv.tw>
Add USB ID (1b80:c810) for Kworld MC810.
Priority: normal
Signed-off-by: Wen-chien Jesse Sung <jesse@cola.voip.idv.tw>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Marcel Jueling <Marcel@Jueling.de>
Add USB ID (1b80:e397) for Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0.
Priority: normal
Signed-off-by: Marcel Jueling <Marcel@Jueling.de>
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Antti Palosaari <crope@iki.fi>
Add USB ID (07ca:a805) for AverMedia AVerTV Volar GPS 805 (A805).
Thanks to Chris Brown <chrisneilbrown@gmail.com> for reporting and
testing.
Priority: normal
Signed-off-by: Antti Palosaari <crope@iki.fi>
Tested-by: Chris Brown <chrisneilbrown@gmail.com>
|
|
From: Antti Palosaari <crope@iki.fi>
Add 3rd dvb_usb_device_properties entry for upcoming USB IDs because
current entries are full.
Priority: normal
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Stuart Hall <mailing-lists@enginuities.com>
Patch to provide basic support for DigitalNow TinyTwin Remote. It uses
same remote as TwinHan AzureWave AD-TU700(704J).
Priority: normal
Signed-off-by: Stuart Hall <mailing-lists@enginuities.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Antti Palosaari <crope@iki.fi>
Add USB ID (07ca:850a) and configuration hack for AverMedia AVerTV Volar
Black HD (A850) DVB-T USB stick.
Priority: normal
Signed-off-by: Antti Palosaari <crope@iki.fi>
Tested-by: Olivier MENUEL <omenuel@laposte.net>
Tested-by: Thomas Renard <threnard@gmail.com>
|
|
From: Marc Schneider <macke@macke.org>
Add USB ID (15a4:901b) and remote for TrekStor DVB-T USB Stick.
Priority: normal
Signed-off-by: Marc Schneider <macke@macke.org>
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Antti Palosaari <crope@iki.fi>
Add new USB ID (1b80:e395) for KWorld USB DVB-T TV Stick II (VS-DVB-T 395U).
Thanks to Julian Aron Prenner <julian@linux4you.it> for reporting this.
Priority: normal
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Jean Delvare <khali@linux-fr.org>
The v4l-dvb repository supports kernel versions 2.6.16 and later only,
so no need to test for kernel version 2.6.15.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Jochen Friedrich <jochen@scram.de>
Add MC44S803 support to AF9015 driver.
Priority: normal
Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Jose Alberto Reguero <jareguero@telefonica.net>
The new Avermedia Volar-X is shipped with a new remote(RM-KS). The attached
patch add a new option to the remote parameter of dvb_usb_af9015 for this
remote.
Priority: normal
Signed-off-by: Felipe Morales Moreno <felipe.morales.moreno@gmail.com>
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Antti Palosaari <crope@iki.fi>
Remove dual_mode module param. Possible 2nd FE seems not to be buggy
any more and therefore can be enabled as default.
Priority: normal
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Antti Palosaari <crope@iki.fi>
First control messages to the stick timeouts very often due to probable
hw bug. Repeat first message few times if it fails as workaround.
Priority: high
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Antti Palosaari <crope@iki.fi>
Bug causes 2nd FE MPEG TS buffer size to be zero and therefore no picture
when 2nd FE was enabled. Configure correct buffer size also for 2nd FE.
Priority: high
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Antti Palosaari <crope@iki.fi>
Add new USB ID 1b80:e39b for KWorld DVB-T 395U. This device revision does
have Quantek QT1010 silicon tuner.
Priority: normal
Signed-off-by: Antti Palosaari <crope@iki.fi>
Thanks-to: Ray Chen <swyear@gmail.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
changeset 4ecae6da8244 removed algo_control from i2c drivers. However,
on older kernels, a dummy function to implement algo_control is required,
otherwise, an OOPS is generated.
This patch adds a backport for all i2c drivers that defines an
i2c_algorithm, except for cafe_ccic, since OLPC hardware only works
for kernels newer than 2.6.19.
Some of the backported drivers would need also extra changes to work with
older kernels, as specified on v4l/versions.txt. Yet, I decided to add
the backport for those drivers also, since the lack of algo_control doesn't
generate any compilation error, but it is enough to break the driver. So,
better to all for all boards than to allow compiling a kernel backported that
just generates OOPS.
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
It is much more readable to swap the byteorder in the switch rather
than in each case statement. In addition, this fixes a compile error
when compiled for 2.6.16.
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Alain Kalker <miki@dds.nl>
Adds support for the Digittrade DVB-T USB Stick remote.
As the Digittrade USB stick identifies itself as a generic Afatech AF9015
device, the remote cannot be autodetected. To enable it, add the following
to /etc/modprobe.d/dvb-usb-af9015 or /etc/modprobe.conf:
options dvb-usb-af9015 remote=4
Priority: normal
Signed-off-by: Alain Kalker <miki@dds.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Jose Alberto Reguero <jareguero@telefonica.net>
Don't reconnect device in the USB-bus. Reconnect command was not executed every time by device firmware and that causes harm. Reconnection is not needed so remove it.
Priority: high
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Harvey Harrison <harvey.harrison@gmail.com>
Noticed by sparse:
drivers/media/dvb/dvb-usb/af9015.c:756:25: warning: restricted __le16 degrades to integer
drivers/media/dvb/dvb-usb/af9015.c:744:28: warning: restricted __le16 degrades to integer
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Antti Palosaari <crope@iki.fi>
- use static to avoid compile warnings
Priority: normal
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Antti Palosaari <crope@iki.fi>
- add USB-ID 1b80:e396 for KWorld USB DVB-T TV Stick II (VS-DVBT 395U)
Priority: normal
Signed-off-by: Antti Palosaari <crope@iki.fi>
Thanks-to: Bo Hansen <bohans@online.no>
|
|
From: Jose Alberto Reguero <jareguero@telefonica.net>
This patch add support for AverMedia Volar X remote.
Priority: normal
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Herbert Graeber <herbert@graeber-clan.de>
- Add USB ID for MSI DIGIVOX mini III (1462:8807)
Priority: normal
Signed-off-by: Herbert Graeber <herbert@graeber-clan.de>
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Antti Palosaari <crope@iki.fi>
- cast firmware data to u8
- remove cpu_to_le16 from switch-case label
Priority: normal
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Antti Palosaari <crope@iki.fi>
- remove unnecessary #undef's
Priority: normal
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Antti Palosaari <crope@iki.fi>
- enable Maxlinear mxl5005s tuner RSSI
Thaks to Jose Alberto for finding this setting.
Priority: normal
Signed-off-by: Antti Palosaari <crope@iki.fi>
Thanks-to: Jose Alberto Reguero <jareguero@telefonica.net>
|
|
From: Antti Palosaari <crope@iki.fi>
- fix wrong GPIO that causes 2nd FE not to work ater warmboot
Thanks to Andrew Williams <andrew.williams@joratech.com> for reporting this.
Priority: normal
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Antti Palosaari <crope@iki.fi>
- AVerMedia A309 Mini Card (07ca:a309)
Priority: normal
Signed-off-by: Antti Palosaari <crope@iki.fi>
Thanks-to: Dirk Vornheder <dirk_vornheder@yahoo.de>
|
|
From: Antti Palosaari <crope@iki.fi>
- cleanup Telestar Starstick 2 patch
Priority: normal
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Mikko Ohtamaa <mikko@redinnovation.com>
- Add USB ID for Telestar Starstick 2 (10b9:8000)
Priority: normal
Signed-off-by: Mikko Ohtamaa <mikko@redinnovation.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Antti Palosaari <crope@iki.fi>
- initial driver for the Afatech AF9015 chipset
Priority: normal
Signed-off-by: Antti Palosaari <crope@iki.fi>
Thanks-to: Mark Spieth <mark@digivation.com.au>
Thanks-to: Lee Essen <lee.essen@nowonline.co.uk>
Thanks-to: Luca Olivetti <luca@ventoso.org>
Thanks-to: Andrew Leech <andrew@floppyspongeonline.com>
Thanks-to: Nick Andrew <nick-linuxtv@nick-andrew.net>
Thanks-to: Rafael Antoniello <rafael.antoniello@gmail.com>
Thanks-to: Jarryd Beck <jarro.2783@gmail.com>
Thanks-to: Jose Alberto Reguero <jareguero@telefonica.net>
Thanks-to: Benjamin Larsson <banan@ludd.ltu.se>
Thanks-to: Wolfgang Breyha <wbreyha@gmx.net>
|