summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb/dvb-usb/cxusb.c
AgeCommit message (Collapse)Author
2006-04-19drivers/media/dvb/dvb-usb/: possible cleanupsMichael Krufky
From: Adrian Bunk <bunk@stusta.de> - make the following needlessly global struct static: dvb-usb/cxusb.c: cxusb_mt352_config Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-19cxusb-bluebird: bug-fix: power down corrupts frontendMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch prevents a bug where the frontend is unable to tune after waking from powered down state. Now, the device remains powered on until it is disconnected, just like the windows driver. It seems that the bluebird firmware is unable to successfully handle tuning after a powered down state. This patch fixes all of the FusionHDTV Bluebird USB2 devices. The Medion MD95700 will still behave as before, since it was unaffected by this bug. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-16cxusb: lgh064f: set auxiliary byte in pll_setMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This changeset removes pll_init, and instead sets the tuner auxiliary byte in pll_set. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-03-26Fix camera key on FusionHDTV portable remote controlMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Thanks to: Andrew Cohen <cohen@andy.bu.edu> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-03-26cxusb: add support for FusionHDTV USB portable remote controlMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - Added keycodes for the DViCO FusionHDTV portable remote control. - Enabled the remote control for both versions of FusionHDTV DVB-T USB and the FusionHDTV 5 USB Gold (ATSC) Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-03-22cxusb: fix i2c debug messages for bluebird devicesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Only the Medion boxes return 0x08 after an i2c read/write. The bluebird devices do not return anything at all. This patch conditionalizes the test for the 0x08 return code to produce a warning message when using the Medion box, only. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-03-22cxusb: fix debug messagesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - corrects the wording in some of the debug messages. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-03-22cxusb: remove FIXME: comment in bluebird_patch_dvico_firmware_downloadMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Removed the FIXME comment from bluebird_patch_dvico_firmware_download: /* FIXME: are we allowed to change the fw-data ? */ Yes, we are allowed. DViCO's Windows driver also does the same thing. A single firmware image is used to support all of the bluebird boxes. The firmware sets all devices to PID: d700. Instead of using that, the driver replaces the d700 with the cold PID+1 before the download. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-03-22cxusb: conditionalize gpio write for the medion boxMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch removes the (harmless) -ETIMEDOUT during device init for the DViCO FusionHDTV Bluebird boxes, by conditionalizing the gpio write inside cxusb_i2c_xfer to happen only for Medion boxes. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-15cxusb: fix lgdt3303 namingMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The following are specific to lgdt3303, and are being renamed to reflect this. - cxusb_lgdt330x_config renamed to cxusb_lgdt3303_config. - cxusb_lgdt330x_frontend_attach renamed to cxusb_lgdt3303_frontend_attach. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-06sem2mutex: drivers/media/, #2Mauro Carvalho Chehab
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Kernel-sync from patch 3318b Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-05Use MT352 parallel transport for Bluebird FusionHDTV DVB-T boxes (TH7579 & ↵Michael Krufky
LGZ201) From: Michael Krufky <mkrufky@linuxtv.org> Use the parallel transport function of the MT352 demodulator in TH7579 and LGZ201 -based FusionHDTV Bluebird usb boxes. bug-fix Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-04Use parallel transport function of MT352 for FusionHDTV Dual Digital USBMichael Krufky
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> Use the parallel transport function of the MT352 in USB demodulator of the Dual Digital board. bug-fix Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-01-22drivers/media/dvb/: possible cleanupsMichael Krufky
From: Adrian Bunk <bunk@stusta.de> - make needlessly global code static - #if 0 the following unused global functions: - b2c2/flexcop-dma.c: flexcop_dma_control_packet_irq() - b2c2/flexcop-dma.c: flexcop_dma_config_packet_count() Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-12cleaned up MODULE_AUTHOR for better codingstyleMichael Krufky
- cleaned up MODULE_AUTHOR for better codingstyle Mauro, please fold this into the previous patch, entitled, "Updated MODULE_AUTHOR" Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-12Updated MODULE_AUTHORMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-12Added USB ID for DigitalNow DVB-T Dual USB, DViCO cloneMichael Krufky
- Added USB ID for DigitalNow DVB-T Dual USB, DViCO FusionHDTV DVB-T Dual USB clone Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-10Add support for DViCO FusionHDTV DVB-T USB devicesMichael Krufky
- Add support for DViCO FusionHDTV DVB-T USB devices (Thomson dtt7579 and LG z201 based) Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-09replace omitted 'TODO:'Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-09Remove DViCO specific firmware hacks from the generic code.Christopher Pascoe
From: Patrick Boettcher <pb@linuxtv.org> Move the code that patches bluebird firmware before upload from the generic code into the cxusb driver itself. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2006-01-08codingstyle cleanups & restore some wrongfully deleted dvb-usb-idsMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-08DViCO USB IR Remote supportChristopher Pascoe
Add support for the remote control receiver inside the DViCO FusionHDTV DVB-T Dual Digital, and a keymap for the MCE remote bundled with it. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2006-01-08DViCO Dual Digital DVB-T / USB bluebird updatesChristopher Pascoe
Add support for the USB portion of the DViCO Dual Digital board. Patch correct "warm" USB IDs into bluebird firmware before download. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2006-01-06Latest patch #ifs were wrong. fixing.Mauro Carvalho Chehab
kernel-sync. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-06USB: remove .owner field from struct usb_driverMauro Carvalho Chehab
From: Greg Kroah-Hartman <gregkh@suse.de> It is no longer needed, so let's remove it, saving a bit of memory. kernel-sync Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-03rename cxusb_bluebird_atsc_properties to cxusb_bluebird_lgh064f_propertiesMichael Krufky
- This property set is for the LG-H064F (FusionHDTV5 USB Gold) - There may, in the future, be a bluebird device using a different NIM, so renaming the struct to somehting NIM-specific is appropriate. Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-01Small cxusb cleanupsMichael Krufky
- Add space after , in memcpy() - Initialize bpll array before memcpy() to pll_init. Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-01Use combined firmware for DVB-T and ATSC Bluebird FusionHDTV USB models.Michael Krufky
- Now using firmware "dvb-usb-bluebird-01.fw", with combined support for atsc and dvb-t Bluebird models. - Use usb alt setting 0 for EP4 transfer (dvb-t), - Use usb alt setting 7 for EP2 transfer (atsc) */ Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-01Add support for DViCO FusionHDTV5 USB GoldMichael Krufky
From: Michael Krufky <mkrufky@m1k.net> - Adds Bluebird ATSC support to the cxusb driver, using dvb-usb-bluebird-atsc-01.fw firmware. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2005-10-01[PATCH] I2C: Kill i2c_algorithm.name (1/7)Michael Krufky
The name member of the i2c_algorithm is never used, although all drivers conscientiously fill it. We can drop it completely, this structure doesn't need to have a name. [PATCH] I2C: Kill i2c_algorithm.id (4/7) There are no more users of i2c_algorithm.id, so we can finally drop this structure member. [PATCH] I2C: Kill i2c_algorithm.id (6/7) In theory, there should be no more users of I2C_ALGO_* at this point. However, it happens that several drivers were using I2C_ALGO_* for adapter ids, so we need to correct these before we can get rid of all the I2C_ALGO_* definitions. Note that this also fixes a bug in media/video/tvaudio.c: /* don't attach on saa7146 based cards, because dedicated drivers are used */ if ((adap->id & I2C_ALGO_SAA7146)) return 0; This test was plain broken, as it would succeed for many more adapters than just the saa7146: any those id would share at least one bit with the saa7146 id. We are really lucky that the few other adapters we want this driver to work with did not fulfill that condition. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2005-08-23This patch changes two things:Patrick Boettcher
1) a firmware update made by the vendor, which has to be done in Windows for now, changes the DVB-data-pipe from isochronous to bulk: it fixes the data distortions (and thus the video-distortions) in DVB-T mode; However, the driver is now not compatible anymore when the firmware is running. 2) with the help of Steve Toth some reverse-engineered functionality is now named correctly, thank you Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2005-08-16init-prototype change for the cxusb-driverPatrick Boettcher
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2005-06-28Changed the name-field of the pci_driver and usb_driver structs to the name ofPatrick Boettcher
the module after compilation. It seems that this field is used in some places where special characters are not allowed. Maybe related to: http://www.uwsg.iu.edu/hypermail/linux/kernel/0505.1/0983.html Thanks to Alan Halverson for finding this problem. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2005-06-07DVB-T part seems to work properly now.Patrick Boettcher
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2005-05-31added preliminary support for the Medion Hybrid USB2.0 DVB-T/Analogue box. ↵Patrick Boettcher
Analogue part is not working yet (cx25842 --> ivtv?). Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-07 21:26:37 +0000