summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb/dvb-usb
AgeCommit message (Collapse)Author
2008-08-09cxusb: add support for DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)Michael Krufky
From: Anton Blanchard <anton@samba.org> Add support for revision 2 of the DViCO FusionHDTV DVB-T Dual Digital 4 which has new tuners and demodulators (2 x DIB7070p). With this patch both DVB reception and IR works. The dib7000p driver currently hardwires the output mode to OUTMODE_MPEG2_SERIAL regardless of what we ask for. Modify it to allow OUTMODE_MPEG2_PAR_GATED_CLK to be set. Longer term we should remove the check completely and set the output mode correctly in all the callers. Add Kconfig bits to ensure the dib7000p and dib0070 modules are enabled. It would be nice to only do this for the !DVB_FE_CUSTOMISE case, but this is what the other DIB7070 module does (there are a number of module dependencies in the attach code). Priority: normal Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-07-30cxusb: fix OOPS and broken tuning regression on FusionHDTV Dual Digital 4Michael Krufky
From: Robert Lowery <rglowery@exemail.com.au> quoting Robert Lowery: I think I've found the cause of the oops. [...] BTW it appears I have fixed my tuning problems with the updated patch below. This reverts a change Mauro made a while back. All is good now :) [...] The good news is that I've got a better patch that definitely works this time and even better, makes use of the standard firmware (rather than the Australian specific one). ...based on an earlier patch by Hans-Frieder Vogt: http://www.linuxtv.org/pipermail/linux-dvb/2008-May/026280.html Signed-off-by: Robert Lowery <rlowery@exemail.com.au> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-07-27remove select's of FW_LOADERMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> After commit d9b19199e4894089456aaad295023263b5225c1a (always enable FW_LOADER unless EMBEDDED=y) we can remove the FW_LOADER select's and corresponding dependencies on HOTPLUG. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-21usb/anysee.c: make struct anysee_usb_mutex staticMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch makes the needlessly global struct anysee_usb_mutex static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-24dw2102: fix in-kernel compilationMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20Adds support for Dvbworld DVB-S 2102 USB cardMauro Carvalho Chehab
From: Igor M Liplianin <liplianin@me.by> Signed-off-by: Igor M Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-17backport commit 3a9282cacdb13466b9c745518237938434dbde0bMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Author: David Woodhouse <dwmw2@infradead.org> Date: Sat May 24 00:13:08 2008 +0100 gp8psk: treat firmware data as const Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-17backport commit e62f89f2aebd57f48687f139c20cf6375693b622Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Author: David Woodhouse <dwmw2@infradead.org> cxusb: treat firmware data as const ...which means allocating our own copy when we want to modify it. (stupid thinko fixed by mkrufky) kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-08v4l-dvb: remove support for kernels < 2.6.16Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Phase 4 removes the compatibility support for kernels < 2.6.16. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-08v4l-dvb: remove support for kernels < 2.6.13Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Phase 3 of the compat cleanup. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-08v4l-dvb: remove support for kernels < 2.6.10Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Phase 2 removes support for kernels < 2.6.10. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-07merge: http://linuxtv.org/hg/~mkrufky/wembleyMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-03dib0700: add support for Hauppauge Nova-TD Stick 52009Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-07-02cxusb: select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISEMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> After adding support for AVerTVHD Volar, DVB_USB_CXUSB must select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-06-28cxusb: add initial support for AVerTVHD VolarMichael Krufky
From: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Add initial support for this device. The AGC and tracking filter settings for the mxl5003 are known to be wrong, but it generally works. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-06-18Add missing selects at dvb-usb/KconfigMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Add missing auto-selects for MEDIA_TUNER_XC2028 and DVB_TDA1004X at dvb-usb/Kconfig. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-18Add missing select for MEDIA_TUNER_TDA827XMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> $ find linux/drivers/media/dvb -exec grep -l tda827x_attach '{}' \; linux/drivers/media/dvb/dvb-usb/m920x.c linux/drivers/media/dvb/ttpci/budget-ci.c Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-13 DVB-USB UMT-010 channel scan oopsMauro Carvalho Chehab
From: Austin Lund <austin.lund@gmail.com> In the umt-010 driver the struct umt_properties sets the number of URBs for transfer to 20. But in dvb-usb.h MAX_NO_URBS_FOR_DATA_STREAM is set to 10. Not surprisingly this causes an oops for all devices which use the umt-010 chipset when they are inserted. fix on Kaffeine channel scan for Initialize stream count using MAX_NO_URBS_FOR_DATA_STREAM. Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-15merge: http://linuxtv.org/hg/~anttip/anysee/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-11Anysee: fix KconfigAntti Palosaari
From: Antti Palosaari <crope@iki.fi> - select DVB_PLL - fix typos in comments Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-06-10merge: http://linuxtv.org/hg/~anttip/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-10gl861: replace non critical msleep(0) with msleep(1) to be on the safe sideAntti Palosaari
From: Antti Palosaari <crope@iki.fi> - change msleep(0) to msleep(1) Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-06-10Anysee: support for Anysee E30C Plus rev 0.4Antti Palosaari
From: Antti Palosaari <crope@iki.fi> - support for Anysee E30C Plus rev 0.4 - set IO port E - set correct TS mode - change deltaf according to latest Windows driver Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-06-05Backport a few fixes from mainstreamMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> - use asm/byteorder.h, instead of linux/byteorder/generic.h - A small Kconfig fix for soc_camera Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-29gl861: coding style fixesAntti Palosaari
From: Antti Palosaari <crope@iki.fi> - coding style fixes raised by checkpatch Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-05-29gl861: remove useless identify_stateAntti Palosaari
From: Antti Palosaari <crope@iki.fi> - remove useless identify_state - device is always warm Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-05-29gl861: sleep a little to avoid I2C errorsAntti Palosaari
From: Antti Palosaari <crope@iki.fi> - add little sleep to avoid I2C errors arising on faster CPUs Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-05-28AU6610: various cosmetic changesAntti Palosaari
From: Antti Palosaari <crope@iki.fi> - update license comments - change MODULE_DESCRIPTION from device specific to chipset specific - correct debug switch from deb_rc to deb_info - correct MPEG2 stream interval from 1.25 to 1 - change frontend_attach error code from -EIO to -ENODEV Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-05-28AU6610: remove useless identify_stateAntti Palosaari
From: Antti Palosaari <crope@iki.fi> - remove useless identify_state - device is always warm Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-05-28AU6610: coding style fixesAntti Palosaari
From: Antti Palosaari <crope@iki.fi> - coding style fixes raised by checkpatch Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-05-26merge: http://linuxtv.org/hg/~anttip/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-21 usb: unalignedMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-21 m920x: unaligned accessMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-21 fix endianness bug in dib0700_devices.cMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-20 usb: input layer dependency fixesMauro Carvalho Chehab
From: Ingo Molnar <mingo@elte.hu> testing of the -tip tree found the following build failures on 2.6.26-rc3: drivers/built-in.o: In function `ttusb_dec_disconnect': ttusb_dec.c:(.text+0xa2c95): undefined reference to `input_unregister_device' drivers/built-in.o: In function `dvb_usb_read_remote_control': dvb-usb-remote.c:(.text+0xa6a94): undefined reference to `input_event' with this config: http://redhat.com/~mingo/misc/config-Tue_May_20_03_48_57_CEST_2008.bad these are due to the media/dvb/usb layer having dependencies on INPUT functionality, without having that spelled out in the Kconfig file. this patch makes that dependency explicit (for the drivers affected), which solves the build error. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-18Anysee: driver for Anysee DVB-T/C receiverAntti Palosaari
From: Antti Palosaari <crope@iki.fi> - driver for Anysee DVB-T/C receiver Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-05-11 gp8psk_power_ctrl should return negative errorsMauro Carvalho Chehab
From: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-09-25dib0700: use dvb_frontend->callback for xc5000 gpio resetMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The tuner_callback function pointer from struct xc5000_config has been removed. Use dvb_frontend->callback instead. Also, mark function dib0700_xc5000_tuner_callback as static int. Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-09-25merge: ~pb/v4l-dvbMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-09-25[PATCH] Add remote control support to Nova-TD (52009)Patrick Boettcher
From: Chris Rankin <rankincj@yahoo.com> This patch adds remote control support for the Hauppauge WinTV Nova-TD (Diversity) model. (That's the 52009 version.) It also adds the key-codes for the credit-card style remote control that comes with this particular adapter. Priority: normal Signed-off-by: Chris Rankin <rankincj@yahoo.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-09-25Add support for Non-Pro version of Pinnacle PCTV HD USB StickPatrick Boettcher
From: Devin Heitmueller <devin.heitmueller@gmail.com> Add USB ID for Pinnacle PCTV HD USB Stick. According to the USB trace and photos, the only difference is the removal of the port for the analog S-video/audio input. Thanks to Mike Pringle <oblongd@gmail.com> for providing the USB trace of the device starting up, and testing the support. Priority: normal Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-09-25Add Pinnacle 801e dependencies to KConfigPatrick Boettcher
From: Devin Heitmueller <devin.heitmueller@gmail.com> Support for the Pinnacle PCTV HD Pro 801e creates a dib0700 dependency on the xc5000 tuner and s5h1411 demodulator drivers. Update KConfig accordingly. Priority: normal Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-09-12convert tuner drivers to use dvb_frontend->callbackMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-09-08Add support for Pinnacle PCTV HD Pro 801e (ATSC only)Patrick Boettcher
From: Devin Heitmueller <devin.heitmueller@gmail.com> Add digital support for the Pinnacle PCTV HD Pro 801e (usb id 2304:023a) Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing new firmware fixing the issue with the i2c that prevented the xc5000 from working. Priority: normal Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-09-07Add support for Asus My Cinema U3000 HybridPatrick Boettcher
From: Albert Comerma <albert.comerma@gmail.com> This patch introduces support for dvb-t for the following dibcom based cards: Asus My Cinema U3000 Hybrid (USB-ID: 0b05:1736) Priority: normal Signed-off-by: Albert Comerma <albert.comerma@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-09-07Add support YUAN High-Tech STK7700D (1164:1f08)Patrick Boettcher
From: Daniel Oliveira Nascimento <don@syst.com.br> This patch extends the dib0700 driver to support the DVB-part of the Asus notebook M51Sn tv-tunner (USB-ID 1164:1f08). Priority: normal Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-09-06Add support for new i2c API provided in firmware version 1.20Patrick Boettcher
From: Devin Heitmueller <devin.heitmueller@gmail.com> The Pinnacle PCTV HD Pro has an xc5000, which exposed a bug in the dib0700's i2c implementation where it did not properly support a single i2c read request (sending it as an i2c write request instead). Version 1.20 of the firmware added support for a new i2c API which supported such requests. This change defaults to fw 1.20 for all devices, but does not default to using the new i2c API (since initial testing suggests problems interacting with the mt2060). Maintainers can enable the use of the new i2c API by putting the following into their frontend initialization: struct dib0700_state *st = adap->dev->priv; st->fw_use_new_i2c_api = 1; Also note that the code expects i2c repeated start to be supported. If the i2c slave does not support repeated start, i2c messsages should have the I2C_M_NOSTART flag set. Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing new firmware fixing the issue as well as example i2c code utilizing the interface. Priority: normal Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-09-06Add support for the Gigabyte R8000-HT USB DVB-T adapter.Patrick Boettcher
From: Finn Thain <fthain@telegraphics.com.au> Thanks to Ilia Penev for the tip-off that this device is much the same as (identical to?) a Terratec Cinergy HT USB XE, and for the firmware hints: http://linuxtv.org/pipermail/linux-dvb/2008-August/028108.html DVB functionality tested OK with xine using the usual dib0700 firmware. This diff is based on the latest latest linuxtv.org v4l-dvb mercurial repo. Priority: normal Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-05-06Fix FW_LOADER depencency at v4l/dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Since: 1) FW_LOADER is defined as: config FW_LOADER tristate "Userspace firmware loading support" depends on HOTPLUG 2) several V4L/DVB driver just selects it; 3) select is not smart enough to auto-select HOTPLUG, if select FW_LOADER. So, All drivers that select FW_LOADER should also depend on HOTPLUG. An easier solution (for the end-user perspective) would be to "select HOTPLUG". However, live is not simple. This would cause recursive dependency issues like this one: drivers/usb/Kconfig:62:error: found recursive dependency: USB -> USB_OHCI_HCD -> I2C -> MEDIA_TUNER -> MEDIA_TUNER_XC2028 -> HOTPLUG -> PCCARD -> PCMCIA -> USB_ARCH_HAS_HCD -> MOUSE_APPLETOUCH -> USB Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-30Use the same name convention for all tuners under common/tunersMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Auto generated by this script: for i in `find drivers/media/ -name Kconfig`; do cat $i |\ sed s,DVB_CORE_ATTACH,MEDIA_ATTACH,g |\ sed s,VIDEO_TUNER,MEDIA_TUNER,g |\ sed s,TUNER_SIMPLE,MEDIA_TUNER_SIMPLE,g |\ sed s,TUNER_TDA8290,MEDIA_TUNER_TDA8290,g |\ sed s,DVB_TDA827X,MEDIA_TUNER_TDA827X,g |\ sed s,DVB_TDA18271,MEDIA_TUNER_TDA18271,g |\ sed s,TUNER_TDA9887,MEDIA_TUNER_TDA9887,g |\ sed s,TUNER_TEA5761,MEDIA_TUNER_TEA5761,g |\ sed s,TUNER_TEA5767,MEDIA_TUNER_TEA5767,g |\ sed s,TUNER_MT20XX,MEDIA_TUNER_MT20XX,g |\ sed s,DVB_TUNER_MT2060,MEDIA_TUNER_MT2060,g |\ sed s,DVB_TUNER_MT2266,MEDIA_TUNER_MT2266,g |\ sed s,DVB_TUNER_MT2131,MEDIA_TUNER_MT2131,g |\ sed s,DVB_TUNER_QT1010,MEDIA_TUNER_QT1010,g |\ sed s,TUNER_XC2028,MEDIA_TUNER_XC2028,g |\ sed s,DVB_TUNER_XC5000,MEDIA_TUNER_XC5000,g >/tmp/temp_mv$$ mv /tmp/temp_mv$$ $i done for i in `find drivers/media/ -type f`; do cat $i |\ sed s,CONFIG_DVB_CORE_ATTACH,CONFIG_MEDIA_ATTACH,g |\ sed s,CONFIG_VIDEO_TUNER,CONFIG_MEDIA_TUNER,g |\ sed s,CONFIG_TUNER_SIMPLE,CONFIG_MEDIA_TUNER_SIMPLE,g |\ sed s,CONFIG_TUNER_TDA8290,CONFIG_MEDIA_TUNER_TDA8290,g |\ sed s,CONFIG_DVB_TDA827X,CONFIG_MEDIA_TUNER_TDA827X,g |\ sed s,CONFIG_DVB_TDA18271,CONFIG_MEDIA_TUNER_TDA18271,g |\ sed s,CONFIG_TUNER_TDA9887,CONFIG_MEDIA_TUNER_TDA9887,g |\ sed s,CONFIG_TUNER_TEA5761,CONFIG_MEDIA_TUNER_TEA5761,g |\ sed s,CONFIG_TUNER_TEA5767,CONFIG_MEDIA_TUNER_TEA5767,g |\ sed s,CONFIG_TUNER_MT20XX,CONFIG_MEDIA_TUNER_MT20XX,g |\ sed s,CONFIG_DVB_TUNER_MT2060,CONFIG_MEDIA_TUNER_MT2060,g |\ sed s,CONFIG_DVB_TUNER_MT2266,CONFIG_MEDIA_TUNER_MT2266,g |\ sed s,CONFIG_DVB_TUNER_MT2131,CONFIG_MEDIA_TUNER_MT2131,g |\ sed s,CONFIG_DVB_TUNER_QT1010,CONFIG_MEDIA_TUNER_QT1010,g |\ sed s,CONFIG_TUNER_XC2028,CONFIG_MEDIA_TUNER_XC2028,g |\ sed s,CONFIG_DVB_TUNER_XC5000,CONFIG_MEDIA_TUNER_XC5000,g >/tmp/temp_mv$$ mv /tmp/temp_mv$$ $i done Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 17:05:26 +0000