summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb/frontends/cx24116.c
AgeCommit message (Collapse)Author
2009-02-23remove redundant memset after kzallocMauro Carvalho Chehab
From: Matthias Schwarzott <zzam@gentoo.org> Hi there! While having a look at the allocation of struct dvb_frontend in *_attach functions, I found some cases calling memset after kzalloc. This is redundant, and the attached patch removes these calls. I also changed one case calling kmalloc and memset to kzalloc. Regards Matthias Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-30Bug fix: Restore HVR-4000 tuning.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@me.by> Some cards uses cx24116 LNB_DC pin for LNB power control, some not uses, some uses it different way, like HVR-4000. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Tested-by : Edgar Hucek <gimli@dark-green.com>
2009-01-17Proper implement set_voltage in cx24116.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@me.by> Now there is a card, which uses cx24116 to control LNB DC voltage. It is DVBWorld DVBS2 PCI-e 2005. The patch is nedded to add support for that card. 1. Rename CMD_SET_TONEPRE to CMD_LNBDCLEVEL. 2. Fill set_voltage with actually control voltage code. 3. Correct set_tone to not affect voltage. Signed-off-by: Igor M. Liplianin <liplianin@me.by>
2009-01-05drivers/media: Fix a number of sparse warningsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> anysee.c:44:5: warning: symbol 'dvb_usb_anysee_delsys' was not declared. Should it be static? cx24116.c:378:3: warning: symbol 'CX24116_MODFEC_MODES' was not declared. Should it be static? stb0899_algo.c:57:5: warning: symbol 'stb0899_get_srate' was not declared. Should it be static? stb0899_algo.c:766:6: warning: symbol 'Log2Int' was not declared. Should it be static? stb0899_drv.c:137:20: warning: symbol 'stb0899_quant_tab' was not declared. Should it be static? stb0899_drv.c:180:20: warning: symbol 'stb0899_est_tab' was not declared. Should it be static? stb0899_drv.c:220:5: warning: symbol '_stb0899_read_reg' was not declared. Should it be static? budget-ci.c:1348:23: warning: symbol 'tt3200_stb6100_config' was not declared. Should it be static? /home/v4l/master/v4l/cx25840-core.c:190:6: warning: symbol 'cx25840_work_handler' was not declared. Should it be static? /home/v4l/master/v4l/m5602_s5k83a.c:116:6: warning: symbol 's5k83a_dump_registers' was not declared. Should it be static? Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-31Add FE_CAN_2G_MODULATION flag to frontends that support DVB-S2Mauro Carvalho Chehab
From: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de> Report to userspace that cx24116 and stv0899 drivers support DVB-S2. Signed-off by: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de> Acked-By: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-18cx24116: change to ALGO_HWMauro Carvalho Chehab
From: Darron Broad <darron@kewl.org> Slow tuning, EG: > szap-s2 -r -c 39.FTATV "1=Pgm1;Net1" reading channels from file '39.FTATV' zapping to 3 '1=Pgm1;Net1': delivery DVB-S, modulation QPSK sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35 vpid 0x0200, apid 0x0300, sid 0x0001 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 00 | signal c2c0 | snr 0000 | ber 00012d4a | unc 00000000 | status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal c040 | snr bb33 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Appears to be resolved by dropping zig-zag tuning and relying on hardware only: > szap-s2 -r -c 39.FTATV "1=Pgm1;Net1" reading channels from file '39.FTATV' zapping to 3 '1=Pgm1;Net1': delivery DVB-S, modulation QPSK sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35 vpid 0x0200, apid 0x0300, sid 0x0001 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal c040 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Tuning to a weaker channel shows that the hardware recovers sync: status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 03 | signal fd40 | snr 5000 | ber 00000000 | unc 00000000 | status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 03 | signal fd80 | snr 5000 | ber 00000000 | unc 00000000 | status 01 | signal fd80 | snr 4e66 | ber 00000000 | unc 00000000 | status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 03 | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | status 01 | signal fd80 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Also, tuning, moving the dish and then restoring the dish also retunes. Priority: normal Signed-off-by: Darron Broad <darron@kewl.org> CC: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-18cx24116: fix retune regression introduced in 70ee86a7c630Mauro Carvalho Chehab
From: Darron Broad <darron@kewl.org> Thanks to AKPM for spotting this. Priority: normal CC: Steven Toth <stoth@hauppauge.com> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-18cx24116: bugfix: add missing delsys in FEC lookupMauro Carvalho Chehab
From: Darron Broad <darron@kewl.org> Delsys was missing when searching for FEC in table. This fixes FEC lookup for DVB-S2 QPSK modulation. Priority: normal CC: Steven Toth <stoth@hauppauge.com> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17dvb: input data pointer of cx24116_writeregN() should be constMauro Carvalho Chehab
From: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> | drivers/media/dvb/frontends/cx24116.c:573: warning: passing argument 3 of 'cx24116_writeregN' discards qualifiers from pointer target type Make the `data' input pointer parameter of cx24116_writeregN() const to kill the warning. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-16cx24116: optimise emulated auto-pilotdarron@kewl.org
From: Christophe Thommeret <hftom@free.fr> Christophe divulged the following: "Since 8PSK (and higher mod) signals are very likely to have pilot symbols, pilot_auto should start with pilot_on for 8PSK. And since QPSK signals are unlikely to have pilot, pilot_auto should start with pilot_off for QPSK. Without the patch: QPSK tuning delay: ~100ms 8PSK tuning delay: ~900ms with patch: QPSK tuning delay: ~100ms 8PSK tuning delay: ~100ms " This patch does as Cristophe asks. In emulated auto-pilot we choose pilot-on for tuning PSK_8 and pilot-off for tuning QPSK. Priority: normal Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16cx24116: Checkpatch compliance #3Steven Toth
From: Steven Toth <stoth@linuxtv.org> cx24116: Checkpatch compliance #3 Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16cx24116: Checkpatch compliance #2Steven Toth
From: Steven Toth <stoth@linuxtv.org> cx24116: Checkpatch compliance #2 Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-07cx24116: Change the default SNR units back to percentage by default.Steven Toth
From: Steven Toth <stoth@linuxtv.org> cx24116: Change the default SNR units back to percentage by default. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-06cx24116: Add module parameter to return SNR as ESNO.Steven Toth
From: Steven Toth <stoth@linuxtv.org> I've retained the older percentage code after discussing this with Darron Broad, but made the ESNO option default. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-06S2API: Change _8PSK / _16APSK to PSK_8 and APSK_16Steven Toth
From: Steven Toth <stoth@linuxtv.org> ... and cleanup any drivers using them. I've also removed NBC_QPSK and modified the cx24116 driver to check the delivery_type also, removing some excess namespace baggage. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-03cx24116: Sanity checking to data input via S2API to the cx24116 demod.Steven Toth
From: Darron Broad <darron@kewl.org> Add some sanity checking to data input via S2API to the cx24116 demod. This patch is valid for both s2-mfe and s2. It was found when testing KAFFEINE with S2API support that invalid modulation modes amongst other parameters were being delivered to the demod. In order to debug this sanity checking has been added. An example session would involve kaffeine setting QAM_AUTO when querying DVB-T, then later when trying to tune to DVB-S this cached value would be presented in error. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org>
2008-09-21S2API: cx24116 register description fixes.Steven Toth
From: Darron Broad <darron@kewl.org> From the author: Here is a simple patch detailing some reverse engineered register detail lost in my latest merge. The comments in the code refer to this register but it is never defined. This corrects this. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org>
2008-09-14History update: MPEG initialization in cx24116.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@me.by> Adjust MPEG initialization in cx24116 in order to accomodate different MPEG CLK position and polarity in different cards. For example, HVR4000 uses 0x02 value, but DvbWorld & TeVii USB cards uses 0x01. Without it MPEG stream was broken on that cards for symbol rates > 30000 kSyms/s. Signed-off-by: Igor M. Liplianin <liplianin@me.by>
2008-09-14S2API: cx24116 Rolloff changes, sysctls cleanup, isl power changes.Steven Toth
From: Darron Broad <darron@kewl.org> Remove the debugging sysctls. Rolloff was broken, not it works as expected and has been tested in kaffeine. Power related changes for the isl6421 are not implemented on the HVR4000/4000LITE. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org>
2008-09-13S2API: A number of cleanusp from the last 24 months.Steven Toth
From: Darron Broad <darron@kewl.org> I was given these changes by Darron Broad and Igor Liplianin and represent a series of patches they've been making to the cx24116 driver over the last two years. Changes for handling symbolrates >30Ksps Tone handling changes. Diseqc support. Sleep support, shutting down the clocks correctly. Cleanup on ROLL_OFF and PILOT support. *** ST - We need to cleanup the sysclt control, this is abnormal in a demod driver. We should work towards understanding the missing API's and ensure we have them in S2API. *** Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org>
2008-09-12S2API: Implement GET/SET handing to the demodsSteven Toth
From: Steven Toth <stoth@linuxtv.org> The frontends will be notified (if they chose) of all _get and _set commands so they can help determine result or action. Results are now returned to userspace correctly. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-09-11S2API: typedefs replaced, _SEQ_'s removed, fixed 16 command arrays replacedSteven Toth
From: Steven Toth <stoth@linuxtv.org> After discussion the following changes were made: 1. Removed the typedefs in frontend.h, use structures. 2. In the frontend.h, remove the 16 command limit on the API and switch to a flexible variable length API. For practical reasons a #define limits this to 64, this should be discussed. 3. Changed dvb-core ioctl handing to deal with variable sequences of commands. tune-v0.0.3.c is required to use this API, it contains the interface changes. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-09-11S2API: tv_ / TV_ to dtv_ / DTV_ namespace changesSteven Toth
From: Steven Toth <stoth@linuxtv.org> The group preferred dtv_ over tv_, this implements it. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-09-09Adjust MPEG initialization in cx24116Igor M. Liplianin
From: Igor M. Liplianin <liplianin@me.by> Adjust MPEG initialization in cx24116 in order to accomodate different MPEG CLK position and polarity in different cards. Signed-off-by: Igor M. Liplianin <liplianin@me.by>
2008-09-09cx24116: Fix lock for high (above 30000 kSyms) symbol ratesIgor M. Liplianin
From: Igor M. Liplianin <liplianin@me.by> cx24116: Fix lock for high (above 30000 kSyms) symbol rates Signed-off-by: Igor M. Liplianin <liplianin@me.by>
2008-09-04cx24116: Adding DVB-S2 demodulator supportSteven Toth
From: Steven Toth <stoth@linuxtv.org> Adds support for the COnexant cx24116 DVB-S2 demodulator. TODO: checkpatch cleanup. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 05:17:49 +0000