summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb/frontends/dib3000mc.c
AgeCommit message (Collapse)Author
2006-12-20[PATCH] DIB3000MC and NOVA T USB2 #2Patrick Boettcher
From: Mario Rossi <mariofutire@googlemail.com> Second part of the patch to make the autosearch work again with DiB3000P/MC. Signed-off-by: Mario Rossi <mariofutire@googlemail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-12-11Fix autosearch indexPatrick Boettcher
From: Mario Rossi <mariofutire@googlemail.com> After rewriting the driver the wrong autosearch index was used when COFDM-parameter needed to be detected. Thanks to Mario Rossi who found it. Signed-off-by: Mario Rossi <mariofutire@googlemail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-10-18Misc fixes for DiB3000 and DiB7000Patrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> This patch contains several fixes for the autosearch algorithm and other small ones. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-10-13AGC command1/2 is board specificPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Added config-struct-parameter to take board-specific AGC command 1 and 2 into account. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-09-19Misc fixes for Nova-T 500Patrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> - forward the clock to the slave undivided - when sleeping the 3000 do not shutdown the clock Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-09-19Misc fixes for DiB3000MC and Nova-T 500Patrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> - make the timing frequency update work. - fix AGC calibration for Nova-T 500 Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-09-19Hauppauge Nova-T 500 support addedPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> This changeset finalizes the support of the Hauppauge Nova-T 500 (Dual DVB-T). It adds correct AGC setting for the 3000P, correct firmware download state detection. Additionally it fixes the mt2060-driver to be able to be used with dvb_attach. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-09-19Misc. changes, DiB3000MC, MT2060Patrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Changed the attach-function of the dib3000mc-driver to return only one frontend. In case of multiple dib3000-chips on one board, one has to call the i2c-enumeration manually before. Added a field to Microtune 2060 config to output the clock to other tuners/device on a board. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-08-21Another fix for the PID parsingPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Still the pid_parse bit was erased. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-08-19Keep the PID parse bit when resetting the output modePatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Matthieu Castet found that with the rewritten dib3000mc-driver the PID-parsing was handled correctly. This changeset fixes it. Thanks Matthieu Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-08-06Remove debug-print from dib3000mcPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Removed and commented a small debug function. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-08-02DiB3000MC: set FE to NULL after being freedPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> DiB3000MC: set FE to NULL after being freed Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-07-29Complete rewrite of the DiB3000mc-driverPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> A complete rewrite of the DiB3000MC/P driver has been done. It is now much more easy to maintain and to get improvements inside. Additionally the tuning time has been reduced and the usage of the driver is much more understandable now. Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: Francois KANOUNNIKOFF <fkanounnikoff@dibcom.fr>
2006-07-04sync with masterPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> sync with master Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-05-14Change dvb_frontend_ops to be a real field instead of a pointer field inside ↵Patrick Boettcher
dvb_frontend From: Patrick Boettcher <pb@linuxtv.org> The dvb_frontend_ops is a pointer inside dvb_frontend. That's why every demod-driver is having a field of dvb_frontend_ops in its private-state-struct and using the reference for filling the pointer-field in dvb_frontend. - It saves at least two lines of code per demod-driver, - reduces object size (one less dereference per frontend_ops-access), - be coherent with dvb_tuner_ops, - makes it a little bit easier for newbies to understand how it works and - avoids stupid mistakes because you would have to copy the dvb_frontend_ops always, before you could assign the static pointer directly, which was dangerous. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-04-18Convert dib3000* to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-03-26Cleanups for mt2060-integrationPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> - some coding style fixes for newly added mt2060 - moved agc-config from fixed values in dib3000mc to configurable ones - whitespace clean-ups for usb-id-file Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-03-25Adding support for MT2060 and thus for some DVB-USB-devices based on itPatrick Boettcher
From: Olivier DANET <odanet@caramail.com> - MT2060 tuner driver - Added support for some USB DVB-T devices based on Dib3000P Signed-off-by: Olivier DANET <odanet@caramail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-01-11From: Panagiotis Issaris <takis@issaris.org>Mauro Carvalho Chehab
Conversions from kmalloc+memset to k(z|c)alloc Conversions from kmalloc+memset to k(z|c)alloc. kernel-sync Signed-off-by: Panagiotis Issaris <takis@issaris.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2005-11-07[PATCH] fix missing includesMichael Krufky
I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2005-07-16Remove all #include <linux/version.h> and all referencesJohannes Stezenbach
to LINUX_VERSION_CODE and KERNEL_VERSION. Based on patch by Olaf Hering. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
2005-04-17- ported all dibusb drivers to fit into the dvb-usb-framewordPatrick Boettcher
- created dvb-pll-entries for the tuner used with the dibusb-drivers - removed all traces of the dibusb driver - adapted the dib3000-frontends to get along with the dvb-pll-changes
2005-04-06small NULL checks which lead to segfaults, when doing developingPatrick Boettcher
2005-04-05 - remove unnecessary casts in frontendsKenneth Aafloy
2005-03-14- added native support for the dtt200u (Yakumo/Typhoon/Hama) USB2.0 devicePatrick Boettcher
- URBs are now submitted, when the actual transfer began, not right from the device plugin (solves a lot of problems) - minor fixes in the dib3000-frontends
2005-03-09 - kfree(NULL) is safeKenneth Aafloy
2005-03-02whitespace cleanup (remove ws at eol, sync with changes in mainline kernel)Johannes Stezenbach
2005-02-11- added a another firmware file for KWorld/ADSTech Instant DVB-T USB2.0 ↵Patrick Boettcher
(DiB3000M-B) - added support for KWorld/ADSTech Instant DVB-T USB2.0 (DiB3000M-B) - added deactivation option of the pid parser for the DiB3000M-B (since there are USB2.0 devices and which now have the ability to deliver the complete Transport Stream)
2005-02-05corrected name syntaxPatrick Boettcher
2005-01-25- corrected the name in driver_descPatrick Boettcher
- removed debug messages and some comments (see dib3000-watch)
2005-01-24- Build fix for older gcc's (thanks to Andrew Morton)Patrick Boettcher
2005-01-13removed the pid_filter_table from frontendsPatrick Boettcher
2005-01-09internal refactoring step 3/3Patrick Boettcher
- added tuner and demod types for easier extension of new devices - added a check for some artec devices which have another tuner onboard, but don't know it, pll_addr is now a callback because of that - general callbacks for pll_set, pll_init and demod_init. They decide which pll-programming function is used and so on - added tuner passthru callback to xfer_ops. now dibusb can en/disable the tuner passthru of the dib3000m*-frontends; necessary for tuner probing - remote type determination (no for hanftek, nec for others), was not planned - fixed a bug in start_feed, which was introduced in step 2/3 but wasn't critical - added pll-programming for lg_tdtp_e102p_tua6034 (it has the tua6034 as pll) - added pll-programming and initialization for PANASONIC ENV77H11D5 - understood the i2c-address problem, now it is more logical
2004-12-29deb_stat and FE_CAN_RECOVER addedPatrick Boettcher
2004-12-29patch by Domen Puncer: File permissions should be octal codes.Johannes Stezenbach
2004-12-27fixed some bugs in the dib3000mcPatrick Boettcher
2004-12-02- prepared support for dynamically i2c addresses of the demodPatrick Boettcher
- added license information for the dib3000-common module
2004-11-23- revise debug optionsPatrick Boettcher
- merged changes from DiBcom v2.1 drivers to dib3000mc - added transfer control callbacks to dib3000mc
2004-11-21added the dib3000mc/p frontend driver. Micheal, sorry for being overhasty ↵Patrick Boettcher
with the Kconfig from dibusb.
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 03:49:57 +0000