summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb/frontends
AgeCommit message (Collapse)Author
2008-08-09cxusb: add support for DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)Michael Krufky
From: Anton Blanchard <anton@samba.org> Add support for revision 2 of the DViCO FusionHDTV DVB-T Dual Digital 4 which has new tuners and demodulators (2 x DIB7070p). With this patch both DVB reception and IR works. The dib7000p driver currently hardwires the output mode to OUTMODE_MPEG2_SERIAL regardless of what we ask for. Modify it to allow OUTMODE_MPEG2_PAR_GATED_CLK to be set. Longer term we should remove the check completely and set the output mode correctly in all the callers. Add Kconfig bits to ensure the dib7000p and dib0070 modules are enabled. It would be nice to only do this for the !DVB_FE_CUSTOMISE case, but this is what the other DIB7070 module does (there are a number of module dependencies in the attach code). Priority: normal Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-08-04merge: http://linuxtv.org/hg/~hgoede/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-01au8522: remove if frequency settings from vsb/qam modulation tablesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Since IF frequency is set after the vsb/qam modulation tables are written, remove the redundant register settings from the vsb/qam modulation tables. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-08-01au8522: clean up function au8522_set_ifMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> re-write this function to make it simpler Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-07-28DVB_DRX397XD: remove FW_LOADER selectMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> Also for the new DVB_DRX397XD driver the FW_LOADER select and the corresponding dependency on HOTPLUG can be removed. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-27au8522: add mechanism to configure IF frequency for vsb and qamMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Add a mechanism to configure IF frequency for vsb and qam. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-07-21replace __FUNCTION__ with __func__Mauro Carvalho Chehab
From: Alexander Beregalov <a.beregalov@gmail.com> v4l/drx397xD: replace __FUNCTION__ with __func__ Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-28merge: http://linuxtv.org/hg/~mkrufky/woodburyMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-27remove select's of FW_LOADERMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> After commit d9b19199e4894089456aaad295023263b5225c1a (always enable FW_LOADER unless EMBEDDED=y) we can remove the FW_LOADER select's and corresponding dependencies on HOTPLUG. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-09Miscellaneous fixesManu Abraham
- Fix a bitfield - Set gain appropriately - Slept for the wrong duration From: Reinhard Nissl <rnissl@gmx.de> Signed-off-by: Reinhard Nissl <rnissl@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-07-09Fix runtime verbosityManu Abraham
From: Reinhard Nissl <rnissl@gmx.de> Signed-off-by: Reinhard Nissl <rnissl@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-07-20Fix macro name at z0194a.hMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> As reported by Hans Verkuil: In file included from /home/v4l/master/v4l/dw2102.c:14: /home/v4l/master/v4l/z0194a.h:93: error: 'STV0229_LOCKOUTPUT_1' undeclared here (not in a function) This is due to some typos that were fixed on stv0299. This patch renames it in accord with that fix. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20Adds support for Dvbworld DVB-S 2102 USB cardMauro Carvalho Chehab
From: Igor M Liplianin <liplianin@me.by> Signed-off-by: Igor M Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-17backport commit bc179153ae2334efe28cf4f3300e024da7d83753Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Author: David Woodhouse <dwmw2@infradead.org> Date: Sat May 24 00:12:23 2008 +0100 dvb frontends: treat firmware data as const kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-15tda10023: Fix typo in tda10023_attach dummy routineOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Fix compiler warning caused by a typo in the tda10023_attach dummy routine. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-07-08Fix a const pointer assignment error in the drx397xD demodulator driverMauro Carvalho Chehab
From: David Howells <dhowells@redhat.com> Fix an assignment of a const pointer to a non-const pointer in the drx397xD demodulator driver. This was introduced in patch eb9bd0e567365d4f607d32d8c41e201da65aa971. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-08v4l-dvb: remove support for kernels < 2.6.16Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Phase 4 removes the compatibility support for kernels < 2.6.16. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-27lgdt330x: add additional FEC control configuration optionMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Allow the following configuration, by passing clock_polarity_flip = 2: Enable FEC automatic reset. Disable spectrum inversion. Enable viterbi resynchronization. Set polarity indicator high. Enable error flag insertion. Thanks to Daniel Gimpelevich, for discovering that this configuration is used on the AVerMedia AVerTVHD Volar. Cc: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-06-22merge: http://linuxtv.org/hg/~mkrufky/hvr950qMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-21au8522: prevent false-positive lock statusMichael Krufky
From: Steven Toth <stoth@linuxtv.org> This decreases scan time in Queens, New York from 28 minutes to 7 minutes, with the exact same services found. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-06-20stv0299: Uncorrected block count and bit error rate fixedOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Fix uncorrected block counter and bit error rate to follow DVB API spec: - Unsupported controls return -ENOSYS. - UNC must never be set to 0. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-06-20tda10023: Fix possible kernel oops during initialisationOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> If the i2c write fails during initialisation, an oops happens because state->frontend.dvb is still undefined. Fixed. Thanks to Sigmund Augdal for reporting this bug, and to Hartmut Birr for suggesting the fix. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Thanks-to: Sigmund Augdal <sigmund@snap.tv> Thanks-to: Hartmut Birr <e9hack@gmail.com>
2008-06-15merge: http://linuxtv.org/hg/~mkrufky/hvr950qMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-13au8522: tuning optimizationsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> If the current modulation and frequency is already set to the desired parameters, then don't re-tune. Don't store current frequency until after we've tuned successfully. Force a re-tune after resume from standby. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-06-15merge: http://linuxtv.org/hg/~anttip/anysee/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-14Improve error message at tda1004x_attachMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> When an error occurs at firmware loading, sometimes, tda1004x stops answering. Instead of reporting such error, attach code were assuming that the device were answering an invalid ID (0xff). This can be seen when enabling debug options: tda1004x: tda1004x_read_byte: reg=0x0 tda1004x: tda1004x_read_byte: error reg=0x0, ret=-5 Now, instead of reporting an invalid ID, it will report the correct error: tda10046: chip is not answering. Giving up. saa7133[0]/dvb: failed to attach tda10046 saa7133[0]/dvb: frontend initialization failed A possible improvement would be trying to reset the device. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-14Improve error messages for tda1004x attachMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> A fresh copy of v.29 firmware, using get_firmware, is leading to an invalid firmware: DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision ff -- invalid tda1004x: trying to boot from eeprom tda1004x: found firmware revision ff -- invalid tda1004x: waiting for firmware upload... tda1004x: Error during firmware upload tda1004x: found firmware revision ff -- invalid tda1004x: firmware upload failed Sometimes, loading/unloading this firmware makes tda1004x to return an invalid ID. However, there were no printk messages to help to identify what were the cause for the error. With this patch, it will now print: Invalid tda1004x ID = 0xff. Can't proceed saa7133[0]/dvb: failed to attach tda10046 saa7133[0]/dvb: frontend initialization failed Tested with LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-10TDA10023: make TS output mode configurableAntti Palosaari
From: Antti Palosaari <crope@iki.fi> - make TS output mode configurable Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-06-05dib0070: fix dib0070_attach when !CONFIG_DVB_TUNER_DIB0070Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-05-28Bug: Fix incorrect Register definitionsManu Abraham
Thanks to Robert Schlabbach <robert_s@gmx.net> for pointing this out From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-05-27Fix incorrect IF_AGC Bitfield definitionManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-24Remove unreferenced deliveryManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-05-25s5h1411.c shouldn't #include "dvb-pll.h"Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-05-25s5h1409.c shouldn't #include "dvb-pll.h"Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-05-24au8522.c shouldn't #include "dvb-pll.h"Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-05-25dib7000p: fix dib7000p_attach when !CONFIG_DVB_DIB7000PMichael Krufky
somebody forgot to to fix this header... Thanks to Ingo Molnar for pointing this out. Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-05-21 or51132.c: unalignedMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-26merge: http://linuxtv.org/hg/~mkrufky/cleanupsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-18DVB-PLL: add Samsung DTOS403IH102A tunerAntti Palosaari
From: Antti Palosaari <crope@iki.fi> - add Samsung DTOS403IH102A tuner Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-05-18TDA10023: make few parameters configurableAntti Palosaari
From: Antti Palosaari <crope@iki.fi> - separate TDA10021 and TDA10023 attach - configurable Xtal settings - configurable input freq offset + baseband conversion type settings Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-09-25merge: ~pb/v4l-dvbMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-09-24merge: http://www.linuxtv.org/hg/~stoth/s2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-23Add support for ST STV0288 demodulator and cards with it.Igor M. Liplianin
From: Georg Acher <acher@baycom.de> From: Igor M. Liplianin <liplianin@me.by> Add support for ST STV0288 demodulator and cards with it, such as TeVii S420. Signed-off by: Georg Acher <acher@baycom.de> Signed-off-by: Igor M. Liplianin <liplianin@me.by>
2008-09-17Add support for Silicon Laboratories SI2109/2110 demodulators.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@me.by> Add support for Silicon Laboratories SI2109/2110 demodulator and cards with it, such as DvbWorld PCI2002. Signed-off-by: Igor M. Liplianin <liplianin@me.by>
2008-09-21S2API: cx24116 register description fixes.Steven Toth
From: Darron Broad <darron@kewl.org> From the author: Here is a simple patch detailing some reverse engineered register detail lost in my latest merge. The comments in the code refer to this register but it is never defined. This corrects this. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org>
2008-09-14History update: MPEG initialization in cx24116.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@me.by> Adjust MPEG initialization in cx24116 in order to accomodate different MPEG CLK position and polarity in different cards. For example, HVR4000 uses 0x02 value, but DvbWorld & TeVii USB cards uses 0x01. Without it MPEG stream was broken on that cards for symbol rates > 30000 kSyms/s. Signed-off-by: Igor M. Liplianin <liplianin@me.by>
2008-09-14S2API: cx24116 Rolloff changes, sysctls cleanup, isl power changes.Steven Toth
From: Darron Broad <darron@kewl.org> Remove the debugging sysctls. Rolloff was broken, not it works as expected and has been tested in kaffeine. Power related changes for the isl6421 are not implemented on the HVR4000/4000LITE. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org>
2008-09-13S2API: A number of cleanusp from the last 24 months.Steven Toth
From: Darron Broad <darron@kewl.org> I was given these changes by Darron Broad and Igor Liplianin and represent a series of patches they've been making to the cx24116 driver over the last two years. Changes for handling symbolrates >30Ksps Tone handling changes. Diseqc support. Sleep support, shutting down the clocks correctly. Cleanup on ROLL_OFF and PILOT support. *** ST - We need to cleanup the sysclt control, this is abnormal in a demod driver. We should work towards understanding the missing API's and ensure we have them in S2API. *** Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org>
2008-09-12S2API: Implement GET/SET handing to the demodsSteven Toth
From: Steven Toth <stoth@linuxtv.org> The frontends will be notified (if they chose) of all _get and _set commands so they can help determine result or action. Results are now returned to userspace correctly. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-09-11S2API: typedefs replaced, _SEQ_'s removed, fixed 16 command arrays replacedSteven Toth
From: Steven Toth <stoth@linuxtv.org> After discussion the following changes were made: 1. Removed the typedefs in frontend.h, use structures. 2. In the frontend.h, remove the 16 command limit on the API and switch to a flexible variable length API. For practical reasons a #define limits this to 64, this should be discussed. 3. Changed dvb-core ioctl handing to deal with variable sequences of commands. tune-v0.0.3.c is required to use this API, it contains the interface changes. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-09 21:01:50 +0000