summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb/frontends
AgeCommit message (Collapse)Author
2009-02-09tda1004x: Fix eeprom firmware load on boards with 16MHz XtalMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> For i2c normal work, we need to slow down the bus speed. However, the slow down breaks the eeprom firmware load. So, use normal speed for eeprom booting and then restore the i2c speed after that. It should also be noticed that no other I2C transfer should be in course while booting from eeprom, otherwise, tda10046 goes into an instable state. So, proper locking are needed at the i2c bus master. Tested with saa7134 MSI TV @nyware A/D board, that comes with an eeprom with firmware version 29. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-01merge: http://mercurial.intuxication.org/hg/v4l-dvb-commits/v4l-dvb-commitsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-01merge: http://linuxtv.org/hg/~dheitmueller/v4l-dvb-s5h1409Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-30Bug fix: Restore HVR-4000 tuning.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@me.by> Some cards uses cx24116 LNB_DC pin for LNB power control, some not uses, some uses it different way, like HVR-4000. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Tested-by : Edgar Hucek <gimli@dark-green.com>
2009-01-29backport changes on stb0899_algo per requestMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-26s5h1409: Perform s5h1409 soft reset after tuningDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Just like with the s5h1411, the s5h1409 needs a soft-reset in order for it to know that the tuner has been told to change frequencies. This change changes the behavior from "random tuning times between 500ms to complete tuning lock failures" to "tuning lock consistently within 700ms". Thanks to Robert Krakora <rob.krakora@messagenetsystems.com> for doing initial testing of the patch on the KWorld 330U. Thanks to Andy Walls <awalls@radix.net> for doing testing of the patch on the HVR-1600. Thanks to Michael Krufky <mkrufky@linuxtv.org> for doing additional testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-01-18DVB: negative internal->sub_range won't get noticedMauro Carvalho Chehab
From: Roel Kluin <roel.kluin@gmail.com> internal->sub_range is unsigned, a negative won't get noticed. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-17Proper implement set_voltage in cx24116.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@me.by> Now there is a card, which uses cx24116 to control LNB DC voltage. It is DVBWorld DVBS2 PCI-e 2005. The patch is nedded to add support for that card. 1. Rename CMD_SET_TONEPRE to CMD_LNBDCLEVEL. 2. Fill set_voltage with actually control voltage code. 3. Correct set_tone to not affect voltage. Signed-off-by: Igor M. Liplianin <liplianin@me.by>
2009-01-17v4l-dvb: fix a bunch of compile warnings.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-01-14lnbp21: documentation about the system registerMauro Carvalho Chehab
From: Hans Werner <HWerner4@gmx.de> Here is a patch which adds some documentation about meanings of the the lnbp21 system register bits. Signed-off-by: Hans Werner <hwerner4@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-10Fix 'stb0899_get_srate' defined but not used warningHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-01-07backport commit 9b4778f680aa79d838ae2be6ab958938f744ce5fMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Author: Harvey Harrison <harvey.harrison@gmail.com> trivial: replace last usages of __FUNCTION__ in kernel __FUNCTION__ is gcc-specific, use __func__ kernel-sync: Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-05drivers/media: Fix a number of sparse warningsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> anysee.c:44:5: warning: symbol 'dvb_usb_anysee_delsys' was not declared. Should it be static? cx24116.c:378:3: warning: symbol 'CX24116_MODFEC_MODES' was not declared. Should it be static? stb0899_algo.c:57:5: warning: symbol 'stb0899_get_srate' was not declared. Should it be static? stb0899_algo.c:766:6: warning: symbol 'Log2Int' was not declared. Should it be static? stb0899_drv.c:137:20: warning: symbol 'stb0899_quant_tab' was not declared. Should it be static? stb0899_drv.c:180:20: warning: symbol 'stb0899_est_tab' was not declared. Should it be static? stb0899_drv.c:220:5: warning: symbol '_stb0899_read_reg' was not declared. Should it be static? budget-ci.c:1348:23: warning: symbol 'tt3200_stb6100_config' was not declared. Should it be static? /home/v4l/master/v4l/cx25840-core.c:190:6: warning: symbol 'cx25840_work_handler' was not declared. Should it be static? /home/v4l/master/v4l/m5602_s5k83a.c:116:6: warning: symbol 's5k83a_dump_registers' was not declared. Should it be static? Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-31Add FE_CAN_2G_MODULATION flag to frontends that support DVB-S2Mauro Carvalho Chehab
From: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de> Report to userspace that cx24116 and stv0899 drivers support DVB-S2. Signed-off by: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de> Acked-By: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-23Fix I2C bridge error in zl10353Mauro Carvalho Chehab
From: Dmitri Belimov <d.belimov@gmail.com> Fix I2C bridge error in zl10353 if no tunner attached to internal I2C bus of zl10353 chip. When set enable bridge from internal I2C bus to the main I2C bus (saa7134) the main I2C bus stopped very hardly. No any communication. In our next board we solder additional resistors to internal I2C bus. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-backportMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30v4l: fix compile errors for older kernelsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-30cx24116 - build fixMauro Carvalho Chehab
From: Cyrill Gorcunov <gorcunov@gmail.com> Add missed MODULE check to eliminate inapropriate declaration being choosed which causes a build error. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-12dvb: remove deprecated use of RW_LOCK_UNLOCKED in frontendsMauro Carvalho Chehab
From: Steven Rostedt <rostedt@goodmis.org> Impact: clean up RW_LOCK_UNLOCKED is deprecated. This patch replaces it with the __RW_LOCK_UNLOCKED(lock) macro. This change was a little trickier than others due to the macro being used in another macro that fills an array. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30af9013: Fix gcc false warningsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> drivers/media/dvb/frontends/af9013.c: In function ‘af9013_set_coeff’: drivers/media/dvb/frontends/af9013.c:231: warning: ‘ns_coeff2_8k’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:230: warning: ‘ns_coeff2_2k’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:229: warning: ‘ns_coeff1_8193nu’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:228: warning: ‘ns_coeff1_8192nu’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:227: warning: ‘ns_coeff1_8191nu’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c:226: warning: ‘ns_coeff1_2048nu’ may be used uninitialized in this function drivers/media/dvb/frontends/af9013.c: In function ‘af9013_update_snr’: drivers/media/dvb/frontends/af9013.c:1012: warning: ‘snr_table’ may be used uninitialized in this function Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> CC: Antti Palosaari <crope@iki.fi>
2008-12-26Kbuild: fix compilation when dib7000p is not definedMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> dib7000p.h defines a few extern symbols when CONFIG_DVB_DIB7000P is not set. since the header is used on more than one driver, this causes symbol duplication, as pointed by Ingo Molnar <mingo@elte.hu>: drivers/media/dvb/built-in.o: In function `dib7000p_set_gpio': (.text+0x3f242): multiple definition of `dib7000p_set_gpio' drivers/media/video/built-in.o:(.text+0xb8c1e): first defined here drivers/media/dvb/built-in.o: In function `dib7000p_i2c_enumeration': (.text+0x3f282): multiple definition of `dib7000p_i2c_enumeration' drivers/media/video/built-in.o:(.text+0xb8c3e): first defined here drivers/media/dvb/built-in.o: In function `dib7000p_set_wbd_ref': (.text+0x3f1c1): multiple definition of `dib7000p_set_wbd_ref' drivers/media/video/built-in.o:(.text+0xb8bfe): first defined here LD drivers/net/built-in.o make[2]: *** [drivers/media/built-in.o] Error 1 Priority: normal CC: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-19cx24113: fix compile warningsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-12-18cx24116: change to ALGO_HWMauro Carvalho Chehab
From: Darron Broad <darron@kewl.org> Slow tuning, EG: > szap-s2 -r -c 39.FTATV "1=Pgm1;Net1" reading channels from file '39.FTATV' zapping to 3 '1=Pgm1;Net1': delivery DVB-S, modulation QPSK sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35 vpid 0x0200, apid 0x0300, sid 0x0001 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 00 | signal c2c0 | snr 0000 | ber 00012d4a | unc 00000000 | status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal c040 | snr bb33 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Appears to be resolved by dropping zig-zag tuning and relying on hardware only: > szap-s2 -r -c 39.FTATV "1=Pgm1;Net1" reading channels from file '39.FTATV' zapping to 3 '1=Pgm1;Net1': delivery DVB-S, modulation QPSK sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35 vpid 0x0200, apid 0x0300, sid 0x0001 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal c040 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Tuning to a weaker channel shows that the hardware recovers sync: status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 03 | signal fd40 | snr 5000 | ber 00000000 | unc 00000000 | status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 03 | signal fd80 | snr 5000 | ber 00000000 | unc 00000000 | status 01 | signal fd80 | snr 4e66 | ber 00000000 | unc 00000000 | status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 03 | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | status 01 | signal fd80 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Also, tuning, moving the dish and then restoring the dish also retunes. Priority: normal Signed-off-by: Darron Broad <darron@kewl.org> CC: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-18cx24116: fix retune regression introduced in 70ee86a7c630Mauro Carvalho Chehab
From: Darron Broad <darron@kewl.org> Thanks to AKPM for spotting this. Priority: normal CC: Steven Toth <stoth@hauppauge.com> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-18cx24116: bugfix: add missing delsys in FEC lookupMauro Carvalho Chehab
From: Darron Broad <darron@kewl.org> Delsys was missing when searching for FEC in table. This fixes FEC lookup for DVB-S2 QPSK modulation. Priority: normal CC: Steven Toth <stoth@hauppauge.com> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-14CX24113: Fixed more typosPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Uwe Bugla pointed out that there are some more typos in some print-statements. Fixed. Priority: normal Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-12-14Patch: fix a typo in cx24113.cPatrick Boettcher
From: Uwe Bugla <uwe.bugla@gmx.de> This patch fixes a typo in cx24113.c. Priority: normal Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-12-14Minor fixes for cx24113-driver (codingstyle)Patrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Fixed some minor coding style issues and some driver information printed when using the driver on a board. Priority: normal Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-12-10sync from mainPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> sync from main Priority: normal Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-11-23Add support for the CX24113 DVB-S tuner driverPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> This commit adds support for the CX24113 DVB-S tuner driver and thus support for the Technisat Skystar2 revision 2.8. The driver was created with the help of Technisat. Thank you very much. Priority: normal Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-11-25fix boards for kernels with algo_controlMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> changeset 4ecae6da8244 removed algo_control from i2c drivers. However, on older kernels, a dummy function to implement algo_control is required, otherwise, an OOPS is generated. This patch adds a backport for all i2c drivers that defines an i2c_algorithm, except for cafe_ccic, since OLPC hardware only works for kernels newer than 2.6.19. Some of the backported drivers would need also extra changes to work with older kernels, as specified on v4l/versions.txt. Yet, I decided to add the backport for those drivers also, since the lack of algo_control doesn't generate any compilation error, but it is enough to break the driver. So, better to all for all boards than to allow compiling a kernel backported that just generates OOPS. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16Put s5h1411 into low power mode at end of attach() callMauro Carvalho Chehab
From: Devin Heitmueller <devin.heitmueller@gmail.com> Place the s5h1411 into low power mode until first use (to handle the case where the user plugs in the device and then doesn't use it for a while). On the Pinnacle 801e, this brings the power usage from 126ma down to 82ma. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11Backport a few minor changes from upstreamMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> kernel-sync: Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-10Whitespace cleanupMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Some recent patches added a few bad whitespaces. Remove that. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-05merge: http://linuxtv.org/hg/~anttip/af9015Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-04af9013: fix bug in status readingAntti Palosaari
From: roel kluin <roel.kluin@gmail.com> - ! has a higher precedence than & Priority: normal Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-10-30merge: http://jusst.de/hg/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-28Wait for a maximum of 100mSManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-27Disable PLL Loop while tuningManu Abraham
From: Ales Jurik <ajurik@quick.cz> Signed-off-by: Ales Jurik <ajurik@quick.cz> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-27Port STB0899 and STB6100Manu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-26merge: http://jusst.de/hg/v4l-dvbMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-24Move lgdt3304 driver to the proper place and allow it to compileMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-24Move S921 driver to the proper place and allow it to compileMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-24zl10353: add new register configuration for zl10353/especially 6mhz taiwan.Mauro Carvalho Chehab
From: Markus Rechberger <mrechberger@gmail.com> Priority: normal Signed-off-by: Markus Rechberger <mrechberger@sundtek.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-20s5h1411: Power down s5h1411 when not in useSteven Toth
From: Devin Heitmueller <devin.heitmueller@gmail.com> Power down the s5h1411 demodulator when not in use (on the Pinnacle 801e, this brings idle power from 123ma down to 84ma). Priority: normal Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Acked-by: Steven Toth <stoth@linuxtv.org>
2008-10-20s5h1411: Skip reconfiguring demod modulation if already at the desired ↵Steven Toth
modulation From: Devin Heitmueller <devin.heitmueller@gmail.com> If we are already at the desired modulation, there is no need to reconfigure the demod (at a tuning time cost) Note that this change revealed that although the datasheet says the demod starts out in VSB-8 mode, the first tuning was failing consistently unless we went through the work of setting the registers. So add a field to denote this case so we always do the enable_frontend call, even if the first tuning request is for VSB-8. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Steven Toth <stoth@linuxtv.org>
2008-10-20s5h1411: Perform s5h1411 soft reset after tuningSteven Toth
From: Devin Heitmueller <devin.heitmueller@gmail.com> If you instruct the tuner to change frequencies, it can take up to 2500ms to get a demod lock. By performing a soft reset after the tuning call (which is consistent with how the Pinnacle 801e Windows driver behaves), you get a demod lock inside of 300ms Priority: normal Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Steven Toth <stoth@linuxtv.org>
2008-10-18s5h1411: Add the #define for an existing supporting I/FSteven Toth
From: Steven Toth <stoth@linuxtv.org> s5h1411: Add the #define for an existing supporting I/F Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16s5h1411: Remove meaningless codeSteven Toth
From: Steven Toth <stoth@linuxtv.org> s5h1411: Remove meaningless code Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16s5h1411: bugfix: Setting serial or parallel mode could destroy bitsSteven Toth
From: Steven Toth <stoth@linuxtv.org> Adding a serialmode function to read/and/or/write the register for safety. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 21:28:14 +0000