| Age | Commit message (Collapse) | Author |
|---|
|
combinations used by Siemens and Technotrend on their DVB-C cards
|
|
- Makes zigzag to not change frequency for DVB-c at all. It only resets
the parameters over and over again. - The IF of 35937500 might be better to be 36000000. This might be what the
card designer meant. My card shows the AFC fine tuning offset to be closest
to zero with 35937500 (one step below 36MHz). Some other cards might be
different. I have not heard of any complaints about my patch not working
for someone in this respect.
- Has anyone ever tested this auto inversion thing? DVB-c is far too slow to
tune and lock for this auto inversion code to work. Therefore you need to
manually set it. Maybe zigzag changes above allow the auto inversion to work. - QAM registers have been tweaked to non-specification values. I do not know
if someone has counterexamples, but this works for a lot of people.
|
|
|
|
(patch supplied by Volker Cordes)
|
|
- implemented SEC_VOLTAGE_OFF for stv0299 and alps_bsrv2
|
|
|
|
less dependent on the linux kernel. here is the place to store
additional dvb_* functions, which encapsulate linux kernel functionality
which cannot be expressed as a one-liner
- rename ddelay() to dvb_delay(), move it to dvb_functions.h
- change all files to include dvb_functions.h instead of dvb_compat.h
- compile fix for the saa7111 driver
|
|
- replace -ENOSPC by -EBUSY in demux feed allocation
|
|
|
|
- add some ifdef magic into i2c drivers (mxb/analog drivers only)
- shuffle around includes, so that "dvb_compat.h" is included after
all other include files
- fix a warning in saa7146 i2c code
|
|
|
|
|
|
|
|
|
|
|
|
the version that made it into the 2.5.68 kernel.
- remove unnecessary c++-style comments
- fixed some line breaks and the style function headers
are formatted: please don't argue with me about these changes,
I don't care how they are formatted.
- remove newline breaks between memory allocation and the return value
check
Some more interesing stuff:
- remove ddelay() functions completly, replace with set_current_state() and
manual schedule_timeout() calls.
- made some init data for the mxb driver static and global (patch already
send to lkml)
Some crucial changes:
- inherit some return values Mr. Alan Cox has changed -- please review
|
|
- return POLL_ERR in case of filter timeout
|
|
|
|
|
|
|
|
these belong to compat.h...
maybe we want to change the devfs_mk_dir() declaration to follow >2.5.66
semantics by default, but this would require a few more lines of code
|
|
|
|
|
|
|
|
|
|
- introduce kernel_thread_setup() function to encapsulate linux process model related stuff
|
|
- sync Kconfig and Makefiles with 2.5.65
- fix various things in saa7146 because of latest v4l changes in 2.5.65
- makelinks: removed the compat module from the 2.5.x build process
- makelinks: removed the linkage of ttusb and bt8xx -- enable this again for
the next patches, when ttusb is more stable and the bt8xx related patches
have been applied by Gerd Knorr
- dvb: removed the compat module from the 2.5.x build process, added #ifdefs
around the inclusion of compat.h. this was necessary because having compat
code in the newest 2.5.x kernel is awkward.
- dvb: move around of dvb_usercopy again. because I removed the compat module
from the 2.5.x build process, dvb_usercopy had to be moved to another file
- dvb: change MOD_*_USE_COUNT to module_get/module_put in various files,
but I'm not sure if I did this right. please review these changes.
- dvb: removed the crc32 code from dvb_demux.c, because it's in compat.c, too.
- dvb: removed some cruft from dvd_i2c.c, which is present in compat.h
- all files: apply small fixes to reflect the new location of some header
files
|
|
kdvb-fe won't try to tune multiple times, it won't try to zigzag, nothing.
|
|
|
|
<ragge@nada.kth.se>
|
|
- div = (freq + 36250000 + 31250) / 62500;
+ div = (freq + 36125000 + 31250) / 62500;
|
|
dvb_dummy_fe.c:94: warning: function declaration isn't a prototype
dvb_dummy_fe.c:27: warning: `debug' defined but not used
|
|
module paramter sct=0/1/2 respectively.
|
|
to Jack Thomasson <jkt@Helius.COM> for pointing this out...
|
|
|
|
- Bugfixes
- Setup clock polarity properly
|
|
- Support BW 6 and 7 MHz modes
- Bugfixes
|
|
|
|
|
|
|
|
|
|
|
|
videodev.o dependency,
so we can later split up the av7110 driver into a av7110 and budget card driver.
I tested this on 2.4.18-3 (original RedHat 7.3 kernel) and 2.5.53.
Changes in detail:
saa7146:
- fixed the unitialised timer warnings
- split saa7146.o into saa7146.o and saa7146_vv.o:
all videodev (ie. v4l) related stuff is now encapsulated in saa7146_vv.o.
the extension (ie. mxb or dvb-ttpci) now has to make sure to register the v4l
devices via helper functions provided by saa7146_vv
mxb:
- changes to make the driver compile with the new saa7146 and saa7146_vv parts
- fix the vbi bypass issue for MXBs with saa7146, rev. 1 card
av7110:
- changes to make the driver compile with the new saa7146 and saa7146_vv parts
- some changes related to the upcoming av7110 <=> budget splitup, but they are
commented out
- changed the saa7146 PAL values to experimental values that look good to me, but
kept the old values as a comment. where are the original values from? there is
a big black border on most channels on the left side which annoyed me...
- changed from video/generic_usercopy() to dvb_usercopy() and put this into the
source code, not into compat.c
- moved the crc_32* stuff from compat.c to the source file where it is used
- now compat.[ch] was removed completely, all references were deleted from
all other files.
other:
- updated the README and TODO files
- changed "makelinks" to remove alps_bsru6 stuff from kernel when making the symlinks
- fixed the build files in "build-2.4"
- fixed all other files needed for 2.5.x kernel build
|
|
replaces the old BSRU6 driver..
|
|
anymore.
|
|
reset bit in autoinversion code
|
|
|
|
|
|
|
|
mode - now we don't need to clear the interrupt bits anymore
- use one frequency divisor for all bands
- use high PLL charge pump current all the time
|
